Greg Kroah-Hartman <greg@kroah.com>
Henk Vergonet <Henk.Vergonet@gmail.com>
Henrik Kretzschmar <henne@nachtwindheim.de>
+Henrik Rydberg <rydberg@bitmath.org>
Herbert Xu <herbert@gondor.apana.org.au>
Jacob Shin <Jacob.Shin@amd.com>
James Bottomley <jejb@mulgrave.(none)>
compatible: must contain "marvell,armada385"
+In addition, boards using the Marvell Armada 388 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada388"
+
Example:
compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
o "atmel,at91sam9g45"
o "atmel,at91sam9n12"
o "atmel,at91sam9rl"
+ o "atmel,at91sam9xe"
* "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
SoC family:
o "atmel,sama5d3" shall be extended with the specific SoC compatible:
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
};
+
+Special Function Registers (SFR)
+
+Special Function Registers (SFR) manage specific aspects of the integrated
+memory, bridge implementations, processor and other functionality not controlled
+elsewhere.
+
+required properties:
+- compatible: Should be "atmel,<chip>-sfr", "syscon".
+ <chip> can be "sama5d3" or "sama5d4".
+- reg: Should contain registers location and length
+
+ sfr@f0038000 {
+ compatible = "atmel,sama5d3-sfr", "syscon";
+ reg = <0xf0038000 0x60>;
+ };
--- /dev/null
+Conexant Digicolor Platforms Device Tree Bindings
+
+Each device tree must specify which Conexant Digicolor SoC it uses.
+Must be the following compatible string:
+
+ cnxt,cx92755
Required root node properties:
- compatible = "fsl,imx6q";
+Freescale Vybrid Platform Device Tree Bindings
+----------------------------------------------
+
+For the Vybrid SoC familiy all variants with DDR controller are supported,
+which is the VF5xx and VF6xx series. Out of historical reasons, in most
+places the kernel uses vf610 to refer to the whole familiy.
+
+Required root node compatible property (one of them):
+ - compatible = "fsl,vf500";
+ - compatible = "fsl,vf510";
+ - compatible = "fsl,vf600";
+ - compatible = "fsl,vf610";
Freescale LS1021A Platform Device Tree Bindings
------------------------------------------------
compatible = "fsl,ls1021a-dcfg";
reg = <0x0 0x1ee0000 0x0 0x10000>;
};
+
+Freescale LS2085A SoC Device Tree Bindings
+------------------------------------------
+
+LS2085A ARMv8 based Simulator model
+Required root node properties:
+ - compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+
Required root node properties:
- compatible = "hisilicon,hip04-d01";
+HiP01 ca9x2 Board
+Required root node properties:
+ - compatible = "hisilicon,hip01-ca9x2";
+
Hisilicon system controller
reboot-offset = <0x4>;
};
+-----------------------------------------------------------------------
+Hisilicon HiP01 system controller
+
+Required properties:
+- compatible : "hisilicon,hip01-sysctrl"
+- reg : Register address and size
+
+The HiP01 system controller is mostly compatible with hisilicon
+system controller,but it has some specific control registers for
+HIP01 SoC family, such as slave core boot, and also some same
+registers located at different offset.
+
+Example:
+
+ /* for hip01-ca9x2 */
+ sysctrl: system-controller@10000000 {
+ compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+ reg = <0x10000000 0x1000>;
+ reboot-offset = <0x4>;
+ };
+
-----------------------------------------------------------------------
Hisilicon CPU controller
- compatible: should be one of:
"mediatek,mt8135-sysirq"
"mediatek,mt8127-sysirq"
+ "mediatek,mt6592-sysirq"
"mediatek,mt6589-sysirq"
"mediatek,mt6582-sysirq"
"mediatek,mt6577-sysirq"
--- /dev/null
+SAMSUNG Exynos SoCs Chipid driver.
+
+Required properties:
+- compatible : Should at least contain "samsung,exynos4210-chipid".
+
+- reg: offset and length of the register set
+
+Example:
+ chipid@10000000 {
+ compatible = "samsung,exynos4210-chipid";
+ reg = <0x10000000 0x100>;
+ };
Required root node properties:
- compatible:
+ - "sirf,atlas6-cb" : atlas6 "cb" evaluation board
+ - "sirf,atlas6" : atlas6 device based board
+ - "sirf,atlas7-cb" : atlas7 "cb" evaluation board
+ - "sirf,atlas7" : atlas7 device based board
- "sirf,prima2-cb" : prima2 "cb" evaluation board
- - "sirf,marco-cb" : marco "cb" evaluation board
- "sirf,prima2" : prima2 device based board
- - "sirf,marco" : marco device based board
- compatible: Should be set to one of the following:
marvell,armada370-mbus
marvell,armadaxp-mbus
- marvell,armada370-mbus
- marvell,armadaxp-mbus
+ marvell,armada375-mbus
+ marvell,armada380-mbus
marvell,kirkwood-mbus
marvell,dove-mbus
marvell,orion5x-88f5281-mbus
--- /dev/null
+Alphascale Clock Controller
+
+The ACC (Alphascale Clock Controller) is responsible of choising proper
+clock source, setting deviders and clock gates.
+
+Required properties for the ACC node:
+ - compatible: must be "alphascale,asm9260-clock-controller"
+ - reg: must contain the ACC register base and size
+ - #clock-cells : shall be set to 1.
+
+Simple one-cell clock specifier format is used, where the only cell is used
+as an index of the clock inside the provider.
+It is encouraged to use dt-binding for clock index definitions. SoC specific
+dt-binding should be included to the device tree descriptor. For example
+Alphascale ASM9260:
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+This binding contains two types of clock providers:
+ _AHB_ - AHB gate;
+ _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+All clock specific details can be found in the SoC documentation.
+CLKID_AHB_ROM 0
+CLKID_AHB_RAM 1
+CLKID_AHB_GPIO 2
+CLKID_AHB_MAC 3
+CLKID_AHB_EMI 4
+CLKID_AHB_USB0 5
+CLKID_AHB_USB1 6
+CLKID_AHB_DMA0 7
+CLKID_AHB_DMA1 8
+CLKID_AHB_UART0 9
+CLKID_AHB_UART1 10
+CLKID_AHB_UART2 11
+CLKID_AHB_UART3 12
+CLKID_AHB_UART4 13
+CLKID_AHB_UART5 14
+CLKID_AHB_UART6 15
+CLKID_AHB_UART7 16
+CLKID_AHB_UART8 17
+CLKID_AHB_UART9 18
+CLKID_AHB_I2S0 19
+CLKID_AHB_I2C0 20
+CLKID_AHB_I2C1 21
+CLKID_AHB_SSP0 22
+CLKID_AHB_IOCONFIG 23
+CLKID_AHB_WDT 24
+CLKID_AHB_CAN0 25
+CLKID_AHB_CAN1 26
+CLKID_AHB_MPWM 27
+CLKID_AHB_SPI0 28
+CLKID_AHB_SPI1 29
+CLKID_AHB_QEI 30
+CLKID_AHB_QUADSPI0 31
+CLKID_AHB_CAMIF 32
+CLKID_AHB_LCDIF 33
+CLKID_AHB_TIMER0 34
+CLKID_AHB_TIMER1 35
+CLKID_AHB_TIMER2 36
+CLKID_AHB_TIMER3 37
+CLKID_AHB_IRQ 38
+CLKID_AHB_RTC 39
+CLKID_AHB_NAND 40
+CLKID_AHB_ADC0 41
+CLKID_AHB_LED 42
+CLKID_AHB_DAC0 43
+CLKID_AHB_LCD 44
+CLKID_AHB_I2S1 45
+CLKID_AHB_MAC1 46
+
+CLKID_SYS_CPU 47
+CLKID_SYS_AHB 48
+CLKID_SYS_I2S0M 49
+CLKID_SYS_I2S0S 50
+CLKID_SYS_I2S1M 51
+CLKID_SYS_I2S1S 52
+CLKID_SYS_UART0 53
+CLKID_SYS_UART1 54
+CLKID_SYS_UART2 55
+CLKID_SYS_UART3 56
+CLKID_SYS_UART4 56
+CLKID_SYS_UART5 57
+CLKID_SYS_UART6 58
+CLKID_SYS_UART7 59
+CLKID_SYS_UART8 60
+CLKID_SYS_UART9 61
+CLKID_SYS_SPI0 62
+CLKID_SYS_SPI1 63
+CLKID_SYS_QUADSPI 64
+CLKID_SYS_SSP0 65
+CLKID_SYS_NAND 66
+CLKID_SYS_TRACE 67
+CLKID_SYS_CAMM 68
+CLKID_SYS_WDT 69
+CLKID_SYS_CLKOUT 70
+CLKID_SYS_MAC 71
+CLKID_SYS_LCD 72
+CLKID_SYS_ADCANA 73
+
+Example of clock consumer with _SYS_ and _AHB_ sinks.
+uart4: serial@80010000 {
+ compatible = "alphascale,asm9260-uart";
+ reg = <0x80010000 0x4000>;
+ clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
+ interrupts = <19>;
+ status = "disabled";
+};
+
+Clock consumer with only one, _AHB_ sink.
+timer0: timer@80088000 {
+ compatible = "alphascale,asm9260-timer";
+ reg = <0x80088000 0x4000>;
+ clocks = <&acc CLKID_AHB_TIMER0>;
+ interrupts = <29>;
+};
+
Each button (key) is represented as a sub-node of "gpio-keys":
Subnode properties:
+ - gpios: OF device-tree gpio specification.
+ - interrupts: the interrupt line for that input.
- label: Descriptive name of the key.
- linux,code: Keycode to emit.
-Required mutual exclusive subnode-properties:
- - gpios: OF device-tree gpio specification.
- - interrupts: the interrupt line for that input
+Note that either "interrupts" or "gpios" properties can be omitted, but not
+both at the same time. Specifying both properties is allowed.
Optional subnode-properties:
- linux,input-type: Specify event type this button/key generates.
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- gpio-key,wakeup: Boolean, button can wake-up the system.
+ - linux,can-disable: Boolean, indicates that button is connected
+ to dedicated (not shared) interrupt which can be disabled to
+ suppress events from the button.
Example nodes:
- debounce-interval : Debouncing interval time in milliseconds
- st,scan-count : Scanning cycles elapsed before key data is updated
- st,no-autorepeat : If specified device will not autorepeat
+ - keypad,num-rows : See ./matrix-keymap.txt
+ - keypad,num-columns : See ./matrix-keymap.txt
Example:
--- /dev/null
+DT bindings for Renesas R-Mobile and SH-Mobile memory controllers
+=================================================================
+
+Renesas R-Mobile and SH-Mobile SoCs contain one or more memory controllers.
+These memory controllers differ from one SoC variant to another, and are called
+by different names ("DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
+(DBSC3)", "SDRAM Bus State Controller (SBSC)").
+
+Currently memory controller device nodes are used only to reference PM
+domains, and prevent these PM domains from being powered down, which would
+crash the system.
+
+As there exist no actual drivers for these controllers yet, these bindings
+should be considered EXPERIMENTAL for now.
+
+Required properties:
+ - compatible: Must be one of the following SoC-specific values:
+ - "renesas,dbsc-r8a73a4" (R-Mobile APE6)
+ - "renesas,dbsc3-r8a7740" (R-Mobile A1)
+ - "renesas,sbsc-sh73a0" (SH-Mobile AG5)
+ - reg: Must contain the base address and length of the memory controller's
+ registers.
+
+Optional properties:
+ - interrupts: Must contain a list of interrupt specifiers for memory
+ controller interrupts, if available.
+ - interrupts-names: Must contain a list of interrupt names corresponding to
+ the interrupts in the interrupts property, if available.
+ Valid interrupt names are:
+ - "sec" (secure interrupt)
+ - "temp" (normal (temperature) interrupt)
+ - power-domains: Must contain a reference to the PM domain that the memory
+ controller belongs to, if available.
+
+Example:
+
+ sbsc1: memory-controller@fe400000 {
+ compatible = "renesas,sbsc-sh73a0";
+ reg = <0xfe400000 0x400>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 36 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sec", "temp";
+ power-domains = <&pd_a4bc0>;
+ };
--- /dev/null
+* Freescale Management Complex
+
+The Freescale Management Complex (fsl-mc) is a hardware resource
+manager that manages specialized hardware objects used in
+network-oriented packet processing applications. After the fsl-mc
+block is enabled, pools of hardware resources are available, such as
+queues, buffer pools, I/O interfaces. These resources are building
+blocks that can be used to create functional hardware objects/devices
+such as network interfaces, crypto accelerator instances, L2 switches,
+etc.
+
+Required properties:
+
+ - compatible
+ Value type: <string>
+ Definition: Must be "fsl,qoriq-mc". A Freescale Management Complex
+ compatible with this binding must have Block Revision
+ Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
+ the MC control register region.
+
+ - reg
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies one or two regions
+ defining the MC's registers:
+
+ -the first region is the command portal for the
+ this machine and must always be present
+
+ -the second region is the MC control registers. This
+ region may not be present in some scenarios, such
+ as in the device tree presented to a virtual machine.
+
+Example:
+
+ fsl_mc: fsl-mc@80c000000 {
+ compatible = "fsl,qoriq-mc";
+ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
+ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+ };
+
--- /dev/null
+DT bindings for the Renesas R-Mobile System Controller
+
+== System Controller Node ==
+
+The R-Mobile System Controller provides the following functions:
+ - Boot mode management,
+ - Reset generation,
+ - Power management.
+
+Required properties:
+- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as
+ fallback.
+ Examples with soctypes are:
+ - "renesas,sysc-r8a7740" (R-Mobile A1)
+ - "renesas,sysc-sh73a0" (SH-Mobile AG5)
+- reg: Two address start and address range blocks for the device:
+ - The first block refers to the normally accessible registers,
+ - the second block refers to the registers protected by the HPB
+ semaphore.
+
+Optional nodes:
+- pm-domains: This node contains a hierarchy of PM domain nodes, which should
+ match the Power Area Hierarchy in the Power Domain Specifications section of
+ the device's datasheet.
+
+
+== PM Domain Nodes ==
+
+Each of the PM domain nodes represents a PM domain, as documented by the
+generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
+
+The nodes should be named by the real power area names, and thus their names
+should be unique.
+
+Required properties:
+ - #power-domain-cells: Must be 0.
+
+Optional properties:
+- reg: If the PM domain is not always-on, this property must contain the bit
+ index number for the corresponding power area in the various Power
+ Control and Status Registers. The parent's node must contain the
+ following two properties:
+ - #address-cells: Must be 1,
+ - #size-cells: Must be 0.
+ If the PM domain is always-on, this property must be omitted.
+
+
+Example:
+
+This shows a subset of the r8a7740 PM domain hierarchy, containing the
+C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP domain,
+which is a subdomain of A4S.
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+ reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+ pm-domains {
+ pd_c5: c5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a4s: a4s@10 {
+ reg = <10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3sp: a3sp@11 {
+ reg = <11>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a4su: a4su@20 {
+ reg = <20>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
+
+
+== PM Domain Consumers ==
+
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node.
+
+Example:
+
+ tpu: pwm@e6600000 {
+ compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+ reg = <0xe6600000 0x100>;
+ clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
+ power-domains = <&pd_a3sp>;
+ #pwm-cells = <3>;
+ };
Required properties:
- compatible should contain:
+ * "mediatek,mt8135-uart" for MT8135 compatible UARTS
+ * "mediatek,mt8127-uart" for MT8127 compatible UARTS
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
* "mediatek,mt6582-uart" for MT6582 compatible UARTS
* "mediatek,mt6577-uart" for all compatible UARTS (MT6589, MT6582, MT6577)
- "altr,16550-FIFO64"
- "altr,16550-FIFO128"
- "fsl,16550-FIFO64"
+ - "fsl,ns16550"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
driver is allowed to detect support for the capability even without this
property.
+Note:
+* fsl,ns16550:
+ ------------
+ Freescale DUART is very similar to the PC16552D (and to a
+ pair of NS16550A), albeit with some nonstandard behavior such as
+ erratum A-004737 (relating to incorrect BRK handling).
+
+ Represents a single port that is compatible with the DUART found
+ on many Freescale chips (examples include mpc8349, mpc8548,
+ mpc8641d, p4080 and ls2085a).
+
Example:
uart@80230000 {
--- /dev/null
+* Atmel AC97 controller
+
+Required properties:
+ - compatible: "atmel,at91sam9263-ac97c"
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain AC97 interrupt
+ - ac97-gpios: Please refer to soc-ac97link.txt, only ac97-reset is used
+Optional properties:
+ - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound@fffa0000 {
+ compatible = "atmel,at91sam9263-ac97c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ac97>;
+ reg = <0xfffa0000 0x4000>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+
+ ac97-gpios = <&pioB 0 0 &pioB 2 0 &pioC 29 GPIO_ACTIVE_LOW>;
+};
aeroflexgaisler Aeroflex Gaisler AB
ak Asahi Kasei Corp.
allwinner Allwinner Technology Co., Ltd.
+alphascale AlphaScale Integrated Circuits Systems, Inc.
altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amd Advanced Micro Devices (AMD), Inc.
chrp Common Hardware Reference Platform
chunghwa Chunghwa Picture Tubes Ltd.
cirrus Cirrus Logic, Inc.
+cloudengines Cloud Engines, Inc.
cnm Chips&Media, Inc.
cortina Cortina Systems, Inc.
crystalfontz Crystalfontz America, Inc.
F: drivers/char/apm-emulation.c
APPLE BCM5974 MULTITOUCH DRIVER
-M: Henrik Rydberg <rydberg@euromail.se>
+M: Henrik Rydberg <rydberg@bitmath.org>
L: linux-input@vger.kernel.org
-S: Maintained
+S: Odd fixes
F: drivers/input/mouse/bcm5974.c
APPLE SMC DRIVER
-M: Henrik Rydberg <rydberg@euromail.se>
+M: Henrik Rydberg <rydberg@bitmath.org>
L: lm-sensors@lm-sensors.org
-S: Maintained
+S: Odd fixes
F: drivers/hwmon/applesmc.c
APPLETALK NETWORK LAYER
BTRFS FILE SYSTEM
M: Chris Mason <clm@fb.com>
M: Josef Bacik <jbacik@fb.com>
+M: David Sterba <dsterba@suse.cz>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
F: include/linux/input/
INPUT MULTITOUCH (MT) PROTOCOL
-M: Henrik Rydberg <rydberg@euromail.se>
+M: Henrik Rydberg <rydberg@bitmath.org>
L: linux-input@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rydberg/input-mt.git
-S: Maintained
+S: Odd fixes
F: Documentation/input/multi-touch-protocol.txt
F: drivers/input/input-mt.c
K: \b(ABS|SYN)_MT_
VERSION = 3
PATCHLEVEL = 19
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
NAME = Diseased Newt
# *DOCUMENTATION*
# Needed to be compatible with the O= option
LINUXINCLUDE := \
-I$(srctree)/arch/$(hdr-arch)/include \
+ -Iarch/$(hdr-arch)/include/generated/uapi \
-Iarch/$(hdr-arch)/include/generated \
$(if $(KBUILD_SRC), -I$(srctree)/include) \
-Iinclude \
ifeq ($(CONFIG_OF),y)
+dtb-$(CONFIG_MACH_ASM9260) += \
+ alphascale-asm9260-devkit.dtb
# Keep at91 dtb files sorted alphabetically for each SoC
-# rm9200
-dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb
-# sam9260
-dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91-qil_a9260.dtb
-dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
-dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
-dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
-dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
-# sam9261
-dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb
-# sam9263
-dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
-# sam9g20
-dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
-dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
-dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
-dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb
-# sam9g45
-dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
-# sam9n12
-dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
-# sam9rl
-dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb
-# sam9x5
-dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
-# sama5d3
-dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb
-dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
-dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb
-# sama5d4
-dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb
-
-dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
-dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb
+dtb-$(CONFIG_SOC_SAM_V4_V5) += \
+ at91rm9200ek.dtb \
+ mpa1600.dtb \
+ animeo_ip.dtb \
+ at91-qil_a9260.dtb \
+ aks-cdu.dtb \
+ ethernut5.dtb \
+ evk-pro3.dtb \
+ tny_a9260.dtb \
+ usb_a9260.dtb \
+ at91sam9261ek.dtb \
+ at91sam9263ek.dtb \
+ tny_a9263.dtb \
+ usb_a9263.dtb \
+ at91-foxg20.dtb \
+ at91sam9g20ek.dtb \
+ at91sam9g20ek_2mmc.dtb \
+ kizbox.dtb \
+ tny_a9g20.dtb \
+ usb_a9g20.dtb \
+ usb_a9g20_lpw.dtb \
+ at91sam9m10g45ek.dtb \
+ pm9g45.dtb \
+ at91sam9n12ek.dtb \
+ at91sam9rlek.dtb \
+ at91-ariag25.dtb \
+ at91-cosino_mega2560.dtb \
+ at91sam9g15ek.dtb \
+ at91sam9g25ek.dtb \
+ at91sam9g35ek.dtb \
+ at91sam9x25ek.dtb \
+ at91sam9x35ek.dtb
+dtb-$(CONFIG_SOC_SAM_V7) += \
+ at91-sama5d3_xplained.dtb \
+ sama5d31ek.dtb \
+ sama5d33ek.dtb \
+ sama5d34ek.dtb \
+ sama5d35ek.dtb \
+ sama5d36ek.dtb \
+ at91-sama5d4ek.dtb
+dtb-$(CONFIG_ARCH_ATLAS6) += \
+ atlas6-evb.dtb
+dtb-$(CONFIG_ARCH_ATLAS7) += \
+ atlas7-evb.dtb
+dtb-$(CONFIG_ARCH_AXXIA) += \
+ axm5516-amarillo.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += \
+ bcm2835-rpi-b.dtb \
+ bcm2835-rpi-b-plus.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
bcm4708-netgear-r6300-v2.dtb \
bcm47081-asus-rt-n18u.dtb \
- bcm47081-buffalo-wzr-600dhp2.dtb
-dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
-dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \
+ bcm47081-buffalo-wzr-600dhp2.dtb \
+ bcm47081-buffalo-wzr-900dhp.dtb
+dtb-$(CONFIG_ARCH_BCM_63XX) += \
+ bcm963138dvt.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+ bcm911360_entphn.dtb \
bcm911360k.dtb \
bcm958300k.dtb
-dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
+ bcm28155-ap.dtb \
bcm21664-garnet.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
- berlin2-sony-nsz-gs7.dtb \
- berlin2cd-google-chromecast.dtb \
+ berlin2-sony-nsz-gs7.dtb \
+ berlin2cd-google-chromecast.dtb \
berlin2q-marvell-dmp.dtb
dtb-$(CONFIG_ARCH_BRCMSTB) += \
bcm7445-bcm97445svmb.dtb
-dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
+dtb-$(CONFIG_ARCH_DAVINCI) += \
+ da850-enbw-cmc.dtb \
da850-evm.dtb
-dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
-dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
- exynos3250-rinato.dtb \
+dtb-$(CONFIG_ARCH_EFM32) += \
+ efm32gg-dk3750.dtb
+dtb-$(CONFIG_ARCH_EXYNOS3) += \
+ exynos3250-monk.dtb \
+ exynos3250-rinato.dtb
+dtb-$(CONFIG_ARCH_EXYNOS4) += \
exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos4412-origen.dtb \
exynos4412-smdk4412.dtb \
exynos4412-tiny4412.dtb \
- exynos4412-trats2.dtb \
+ exynos4412-trats2.dtb
+dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
+ exynos5422-odroidxu3.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
-dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb
-dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb
-dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
+dtb-$(CONFIG_ARCH_HI3xxx) += \
+ hi3620-hi4511.dtb
+dtb-$(CONFIG_ARCH_HIX5HD2) += \
+ hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+ highbank.dtb \
ecx-2000.dtb
-dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb
-dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
+dtb-$(CONFIG_ARCH_HIP01) += \
+ hip01-ca9x2.dtb
+dtb-$(CONFIG_ARCH_HIP04) += \
+ hip04-d01.dtb
+dtb-$(CONFIG_ARCH_INTEGRATOR) += \
+ integratorap.dtb \
integratorcp.dtb
-dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
+dtb-$(CONFIG_ARCH_KEYSTONE) += \
+ k2hk-evm.dtb \
k2l-evm.dtb \
k2e-evm.dtb
-dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
+dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-b3.dtb \
+ kirkwood-blackarmor-nas220.dtb \
kirkwood-cloudbox.dtb \
kirkwood-d2net.dtb \
kirkwood-db-88f6281.dtb \
kirkwood-openrd-base.dtb \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
+ kirkwood-pogo_e02.dtb \
kirkwood-rd88f6192.dtb \
kirkwood-rd88f6281-z0.dtb \
kirkwood-rd88f6281-a.dtb \
kirkwood-ts219-6282.dtb \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
-dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb
-dtb-$(CONFIG_ARCH_MMP) += pxa168-aspenite.dtb \
+dtb-$(CONFIG_ARCH_LPC32XX) += \
+ ea3250.dtb phy3250.dtb
+dtb-$(CONFIG_MACH_MESON6) += \
+ meson6-atv1200.dtb
+dtb-$(CONFIG_ARCH_MMP) += \
+ pxa168-aspenite.dtb \
pxa910-dkb.dtb \
mmp2-brownstone.dtb
-dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MXC) += \
+dtb-$(CONFIG_ARCH_MOXART) += \
+ moxart-uc7112lx.dtb
+dtb-$(CONFIG_SOC_IMX1) += \
imx1-ads.dtb \
- imx1-apf9328.dtb \
+ imx1-apf9328.dtb
+dtb-$(CONFIG_SOC_IMX25) += \
imx25-eukrea-mbimxsd25-baseboard.dtb \
imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
imx25-karo-tx25.dtb \
- imx25-pdk.dtb \
+ imx25-pdk.dtb
+dtb-$(CONFIG_SOC_IMX31) += \
imx27-apf27.dtb \
imx27-apf27dev.dtb \
imx27-eukrea-mbimxsd27-baseboard.dtb \
imx27-pdk.dtb \
imx27-phytec-phycore-rdk.dtb \
- imx27-phytec-phycard-s-rdk.dtb \
- imx31-bug.dtb \
+ imx27-phytec-phycard-s-rdk.dtb
+dtb-$(CONFIG_SOC_IMX31) += \
+ imx31-bug.dtb
+dtb-$(CONFIG_SOC_IMX35) += \
imx35-eukrea-mbimxsd35-baseboard.dtb \
- imx35-pdk.dtb \
- imx50-evk.dtb \
+ imx35-pdk.dtb
+dtb-$(CONFIG_SOC_IMX50) += \
+ imx50-evk.dtb
+dtb-$(CONFIG_SOC_IMX51) += \
imx51-apf51.dtb \
imx51-apf51dev.dtb \
imx51-babbage.dtb \
imx51-digi-connectcore-jsk.dtb \
- imx51-eukrea-mbimxsd51-baseboard.dtb \
+ imx51-eukrea-mbimxsd51-baseboard.dtb
+dtb-$(CONFIG_SOC_IMX53) += \
imx53-ard.dtb \
imx53-m53evk.dtb \
imx53-mba53.dtb \
imx53-smd.dtb \
imx53-tx53-x03x.dtb \
imx53-tx53-x13x.dtb \
- imx53-voipac-bsb.dtb \
+ imx53-voipac-bsb.dtb
+dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-aristainetos_4.dtb \
imx6dl-aristainetos_7.dtb \
imx6dl-cubox-i.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6u-801x.dtb \
imx6dl-tx6u-811x.dtb \
+ imx6dl-udoo.dtb \
imx6dl-wandboard.dtb \
imx6dl-wandboard-revb1.dtb \
imx6q-arm2.dtb \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
imx6q-tbs2910.dtb \
- imx6q-udoo.dtb \
- imx6q-wandboard.dtb \
- imx6q-wandboard-revb1.dtb \
imx6q-tx6q-1010.dtb \
imx6q-tx6q-1010-comtft.dtb \
imx6q-tx6q-1020.dtb \
imx6q-tx6q-1020-comtft.dtb \
imx6q-tx6q-1110.dtb \
- imx6sl-evk.dtb \
- imx6sx-sdb.dtb \
+ imx6q-udoo.dtb \
+ imx6q-wandboard.dtb \
+ imx6q-wandboard-revb1.dtb
+dtb-$(CONFIG_SOC_IMX6SL) += \
+ imx6sl-evk.dtb
+dtb-$(CONFIG_SOC_IMX6SX) += \
+ imx6sx-sabreauto.dtb \
+ imx6sx-sdb.dtb
+dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
- ls1021a-twr.dtb \
+ ls1021a-twr.dtb
+dtb-$(CONFIG_SOC_VF610) += \
vf500-colibri-eval-v3.dtb \
vf610-colibri-eval-v3.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb
-dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
+dtb-$(CONFIG_ARCH_MXS) += \
+ imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
imx28-apf28.dtb \
imx28-m28evk.dtb \
imx28-sps1.dtb \
imx28-tx28.dtb
-dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb \
+dtb-$(CONFIG_ARCH_NOMADIK) += \
+ ste-nomadik-s8815.dtb \
ste-nomadik-nhk15.dtb
-dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
+dtb-$(CONFIG_ARCH_NSPIRE) += \
+ nspire-cx.dtb \
nspire-tp.dtb \
nspire-clp.dtb
-dtb-$(CONFIG_ARCH_OMAP2) += omap2420-h4.dtb \
+dtb-$(CONFIG_ARCH_OMAP2) += \
+ omap2420-h4.dtb \
omap2420-n800.dtb \
omap2420-n810.dtb \
omap2420-n810-wimax.dtb \
omap2430-sdp.dtb
-dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \
+dtb-$(CONFIG_ARCH_OMAP3) += \
+ am3517-craneboard.dtb \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
omap3430-sdp.dtb \
omap3-sbc-t3730.dtb \
omap3-thunder.dtb \
omap3-zoom3.dtb
-dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
+dtb-$(CONFIG_SOC_TI81XX) += \
+ dm8168-evm.dtb
+dtb-$(CONFIG_SOC_AM33XX) += \
+ am335x-base0033.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
am335x-evm.dtb \
am335x-nano.dtb \
am335x-pepper.dtb \
am335x-lxm.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
+dtb-$(CONFIG_ARCH_OMAP4) += \
+ omap4-duovero-parlor.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \
omap4-sdp-es23plus.dtb \
omap4-var-dvk-om44.dtb \
omap4-var-stk-om44.dtb
-dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \
+dtb-$(CONFIG_SOC_AM43XX) += \
+ am43x-epos-evm.dtb \
am437x-sk-evm.dtb \
+ am437x-idk-evm.dtb \
am437x-gp-evm.dtb
-dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \
+dtb-$(CONFIG_SOC_OMAP5) += \
+ omap5-cm-t54.dtb \
omap5-sbc-t54.dtb \
omap5-uevm.dtb
-dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \
+dtb-$(CONFIG_SOC_DRA7XX) += \
+ dra7-evm.dtb \
am57xx-beagle-x15.dtb \
dra72-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
+dtb-$(CONFIG_ARCH_ORION5X) += \
+ orion5x-lacie-d2-network.dtb \
orion5x-lacie-ethernet-disk-mini-v2.dtb \
orion5x-maxtor-shared-storage-2.dtb \
orion5x-rd88f5182-nas.dtb
-dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_PRIMA2) += \
+ prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
-dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += \
+ arm-realview-pb1176.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
rk3066a-marsboard.dtb \
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
rk3288-firefly.dtb
-dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
-dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
+dtb-$(CONFIG_ARCH_S3C24XX) += \
+ s3c2416-smdk2416.dtb
+dtb-$(CONFIG_ARCH_S3C64XX) += \
+ s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \
+dtb-$(CONFIG_ARCH_S5PV210) += \
+ s5pv210-aquila.dtb \
s5pv210-goni.dtb \
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
sh7372-mackerel.dtb \
sh73a0-kzm9g.dtb \
sh73a0-kzm9g-reference.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
+ emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
+ r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
r8a7794-alt.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
+dtb-$(CONFIG_ARCH_SOCFPGA) += \
+ socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
socfpga_vt.dtb
-dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
+dtb-$(CONFIG_ARCH_SPEAR13XX) += \
+ spear1310-evb.dtb \
spear1340-evb.dtb
-dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
+dtb-$(CONFIG_ARCH_SPEAR3XX) += \
+ spear300-evb.dtb \
spear310-evb.dtb \
spear320-evb.dtb \
spear320-hmi.dtb
-dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
+dtb-$(CONFIG_ARCH_SPEAR6XX) += \
+ spear600-evb.dtb
+dtb-$(CONFIG_ARCH_STI) += \
+ stih407-b2120.dtb \
stih410-b2120.dtb \
stih415-b2000.dtb \
stih415-b2020.dtb \
stih416-b2000.dtb \
stih416-b2020.dtb \
- stih416-b2020e.dtb
+ stih416-b2020e.dtb \
+ stih418-b2199.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
+ sun4i-a10-chuwi-v7-cw0825.dtb \
sun4i-a10-cubieboard.dtb \
+ sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \
+ sun4i-a10-mk802.dtb \
+ sun4i-a10-mk802ii.dtb \
sun4i-a10-hackberry.dtb \
+ sun4i-a10-hyundai-a7hd.dtb \
sun4i-a10-inet97fv2.dtb \
sun4i-a10-olinuxino-lime.dtb \
sun4i-a10-pcduino.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
+ sun5i-a10s-mk802.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a13-hsg-h702.dtb \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
sun6i-a31-hummingbird.dtb \
- sun6i-a31-m9.dtb
+ sun6i-a31-m9.dtb \
+ sun6i-a31s-cs908.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-bananapi.dtb \
+ sun7i-a20-bananapro.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-pcduino3.dtb
dtb-$(CONFIG_MACH_SUN8I) += \
- sun8i-a23-ippo-q8h-v5.dtb
+ sun8i-a23-ippo-q8h-v5.dtb \
+ sun8i-a23-ippo-q8h-v1.2.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb
-dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
+ tegra20-harmony.dtb \
tegra20-iris-512.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-tec.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
- tegra20-whistler.dtb \
+ tegra20-whistler.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
tegra30-apalis-eval.dtb \
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
- tegra30-colibri-eval-v3.dtb \
+ tegra30-colibri-eval-v3.dtb
+dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
tegra114-dalmore.dtb \
tegra114-roth.dtb \
- tegra114-tn7.dtb \
+ tegra114-tn7.dtb
+dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
tegra124-jetson-tk1.dtb \
tegra124-nyan-big.dtb \
tegra124-venice2.dtb
-dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
-dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+dtb-$(CONFIG_ARCH_U300) += \
+ ste-u300.dtb
+dtb-$(CONFIG_ARCH_U8500) += \
+ ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
ste-hrefv60plus-stuib.dtb \
ste-hrefv60plus-tvk.dtb \
ste-ccu8540.dtb \
ste-ccu9540.dtb
-dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
+dtb-$(CONFIG_ARCH_VERSATILE) += \
+ versatile-ab.dtb \
versatile-pb.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
+dtb-$(CONFIG_ARCH_VEXPRESS) += \
+ vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
vexpress-v2p-ca15_a7.dtb
-dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb
-dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
+dtb-$(CONFIG_ARCH_VIRT) += \
+ xenvm-4.2.dtb
+dtb-$(CONFIG_ARCH_VT8500) += \
+ vt8500-bv07.dtb \
wm8505-ref.dtb \
wm8650-mid.dtb \
wm8750-apc8750.dtb \
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-385-db.dtb \
- armada-385-rd.dtb
+ armada-385-db-ap.dtb \
+ armada-388-db.dtb \
+ armada-388-gp.dtb \
+ armada-388-rd.dtb
dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
armada-xp-netgear-rn2120.dtb \
armada-xp-openblocks-ax3-4.dtb \
armada-xp-synology-ds414.dtb
-dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
+dtb-$(CONFIG_MACH_DOVE) += \
+ dove-cm-a510.dtb \
dove-cubox.dtb \
dove-cubox-es.dtb \
dove-d2plug.dtb \
dove-d3plug.dtb \
dove-dove-db.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb \
+dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ mt6589-aquaris5.dtb \
mt6592-evb.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
-
endif
always := $(dtb-y)
--- /dev/null
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "alphascale-asm9260.dtsi"
+
+/ {
+ model = "Alphascale asm9260 Development Kit";
+ compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
+};
--- /dev/null
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+/ {
+ interrupt-parent = <&icoll>;
+
+ memory {
+ device_type = "memory";
+ reg = <0x20000000 0x2000000>;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ clocks = <&acc CLKID_SYS_CPU>;
+ };
+ };
+
+ osc24m: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-accuracy = <30000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ acc: clock-controller@80040000 {
+ compatible = "alphascale,asm9260-clock-controller";
+ #clock-cells = <1>;
+ clocks = <&osc24m>;
+ reg = <0x80040000 0x204>;
+ };
+
+ icoll: interrupt-controller@80054000 {
+ compatible = "alphascale,asm9260-icoll";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x80054000 0x200>;
+ };
+
+ timer0: timer@80088000 {
+ compatible = "alphascale,asm9260-timer";
+ reg = <0x80088000 0x4000>;
+ clocks = <&acc CLKID_AHB_TIMER0>;
+ interrupts = <29>;
+ };
+ };
+};
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ vpfe0: vpfe@48326000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48326000 0x2000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "vpfe0";
+ status = "disabled";
+ };
+
+ vpfe1: vpfe@48328000 {
+ compatible = "ti,am437x-vpfe";
+ reg = <0x48328000 0x2000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "vpfe1";
+ status = "disabled";
+ };
};
};
0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
>;
};
+
+ vpfe0_pins_default: vpfe0_pins_default {
+ pinctrl-single,pins = <
+ 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe0_pins_sleep: vpfe0_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
+ 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
+ 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
+ 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
+ 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
+ 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
+ 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
+ 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
+ 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
+ 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
+ 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
+ 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
+ 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe1_pins_default: vpfe1_pins_default {
+ pinctrl-single,pins = <
+ 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
+ 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
+ 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
+ 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
+ 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
+ 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
+ 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
+ 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
+ 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
+ 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
+ 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
+ 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
+ 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
+ >;
+ };
+
+ vpfe1_pins_sleep: vpfe1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
+ 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
+ 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
+ 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
+ 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
+ 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
+ 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
+ 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
+ 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
+ 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
+ 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
+ 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
+ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
+ >;
+ };
};
&i2c0 {
pinctrl-0 = <&dcan1_default>;
status = "okay";
};
+
+&vpfe0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe0_pins_default>;
+ pinctrl-1 = <&vpfe0_pins_sleep>;
+
+ port {
+ vpfe0_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
+
+&vpfe1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe1_pins_default>;
+ pinctrl-1 = <&vpfe1_pins_sleep>;
+
+ port {
+ vpfe1_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TI AM437x Industrial Development Kit";
+ compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43";
+
+ v24_0d: fixed-regulator-v24_0d {
+ compatible = "regulator-fixed";
+ regulator-name = "V24_0D";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ v3_3d: fixed-regulator-v3_3d {
+ compatible = "regulator-fixed";
+ regulator-name = "V3_3D";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v24_0d>;
+ };
+
+ vdd_corereg: fixed-regulator-vdd_corereg {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_COREREG";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v24_0d>;
+ };
+
+ vdd_core: fixed-regulator-vdd_core {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_CORE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_corereg>;
+ };
+
+ v1_8dreg: fixed-regulator-v1_8dreg{
+ compatible = "regulator-fixed";
+ regulator-name = "V1_8DREG";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v24_0d>;
+ };
+
+ v1_8d: fixed-regulator-v1_8d{
+ compatible = "regulator-fixed";
+ regulator-name = "V1_8D";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v1_8dreg>;
+ };
+
+ v1_5dreg: fixed-regulator-v1_5dreg{
+ compatible = "regulator-fixed";
+ regulator-name = "V1_5DREG";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v24_0d>;
+ };
+
+ v1_5d: fixed-regulator-v1_5d{
+ compatible = "regulator-fixed";
+ regulator-name = "V1_5D";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&v1_5dreg>;
+ };
+
+ gpio_keys: gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ label = "power-button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&am43xx_pinmux {
+ gpio_keys_pins_default: gpio_keys_pins_default {
+ pinctrl-single,pins = <
+ 0x1b8 (PIN_INPUT | MUX_MODE7) /* cam0_field.gpio4_2 */
+ >;
+ };
+
+ i2c0_pins_default: i2c0_pins_default {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ i2c0_pins_sleep: i2c0_pins_sleep {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ i2c1_pins_default: i2c1_pins_default {
+ pinctrl-single,pins = <
+ 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ >;
+ };
+
+ i2c1_pins_sleep: i2c1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */
+ 0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */
+ >;
+ };
+
+ mmc1_pins_default: pinmux_mmc1_pins_default {
+ pinctrl-single,pins = <
+ 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ 0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ 0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ 0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ 0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ ecap0_pins_default: backlight_pins_default {
+ pinctrl-single,pins = <
+ 0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
+ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ qspi_pins_default: qspi_pins_default {
+ pinctrl-single,pins = <
+ 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */
+ 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
+ 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
+ 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
+ 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */
+ 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
+ >;
+ };
+
+ qspi_pins_sleep: qspi_pins_sleep{
+ pinctrl-single,pins = <
+ 0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c0_pins_default>;
+ pinctrl-1 = <&i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ at24@50 {
+ compatible = "at24,24c256";
+ pagesize = <64>;
+ reg = <0x50>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_pins_default>;
+ pinctrl-1 = <&i2c1_pins_default>;
+ clock-frequency = <400000>;
+
+ tps: tps62362@60 {
+ compatible = "ti,tps62362";
+ regulator-name = "VDD_MPU";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1330000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ vin-supply = <&v3_3d>;
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio4 {
+ status = "okay";
+};
+
+&gpio5 {
+ status = "okay";
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_sleep>;
+ vmmc-supply = <&v3_3d>;
+ bus-width = <4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi_pins_default>;
+ pinctrl-1 = <&qspi_pins_sleep>;
+
+ spi-max-frequency = <48000000>;
+ m25p80@0 {
+ compatible = "mx66l51235l";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * MTD partition table. The ROM checks the first 512KiB for a
+ * valid file to boot(XIP).
+ */
+ partition@0 {
+ label = "QSPI.U_BOOT";
+ reg = <0x00000000 0x000080000>;
+ };
+ partition@1 {
+ label = "QSPI.U_BOOT.backup";
+ reg = <0x00080000 0x00080000>;
+ };
+ partition@2 {
+ label = "QSPI.U-BOOT-SPL_OS";
+ reg = <0x00100000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.U_BOOT_ENV";
+ reg = <0x00110000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.U-BOOT-ENV.backup";
+ reg = <0x00120000 0x00010000>;
+ };
+ partition@5 {
+ label = "QSPI.KERNEL";
+ reg = <0x00130000 0x0800000>;
+ };
+ partition@6 {
+ label = "QSPI.FILESYSTEM";
+ reg = <0x00930000 0x36D0000>;
+ };
+ };
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
+
+&cpu {
+ cpu0-supply = <&tps>;
+};
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: i2c1_pins {
pinctrl-single,pins = <
- 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
- 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
+ 0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ 0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ 0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ 0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
>;
};
+ vpfe0_pins_default: vpfe0_pins_default {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
+ 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
+ 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ >;
+ };
+
+ vpfe0_pins_sleep: vpfe0_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ >;
+ };
+
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
+ 0x12c (PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ 0x114 (PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ 0x128 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ 0x124 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ 0x120 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
+ 0x11c (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
+ 0x130 (PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ 0x118 (PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ 0x140 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ 0x13c (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ 0x138 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
+ 0x134 (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
/* Slave 2 */
- 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
- 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
- 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ 0x58 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ 0x40 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ 0x54 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ 0x50 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ 0x4c (PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ 0x48 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ 0x5c (PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ 0x44 (PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
+ 0x6c (PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ 0x68 (PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ 0x64 (PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ 0x60 (PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ 0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
dss_pins: dss_pins {
pinctrl-single,pins = <
- 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
- 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
- 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
- 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
- 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
- 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
- 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
- 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+ 0x020 (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
+ 0x024 (PIN_OUTPUT | MUX_MODE1)
+ 0x028 (PIN_OUTPUT | MUX_MODE1)
+ 0x02c (PIN_OUTPUT | MUX_MODE1)
+ 0x030 (PIN_OUTPUT | MUX_MODE1)
+ 0x034 (PIN_OUTPUT | MUX_MODE1)
+ 0x038 (PIN_OUTPUT | MUX_MODE1)
+ 0x03c (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
+ 0x0a0 (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0)
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0)
+ 0x0ac (PIN_OUTPUT | MUX_MODE0)
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0)
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0)
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0)
+ 0x0bc (PIN_OUTPUT | MUX_MODE0)
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0)
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0)
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0)
+ 0x0cc (PIN_OUTPUT | MUX_MODE0)
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0)
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0)
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0)
+ 0x0dc (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */
+ 0x0e0 (PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */
+ 0x0e4 (PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */
+ 0x0e8 (PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */
+ 0x0ec (PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */
>;
};
qspi_pins: qspi_pins {
pinctrl-single,pins = <
- 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */
- 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
- 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
- 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
- 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */
- 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
+ 0x7c (PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */
+ 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
+ 0x90 (PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
+ 0x94 (PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
+ 0x98 (PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */
+ 0x9c (PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
>;
};
0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
>;
};
+
+ usb1_pins: usb1_pins {
+ pinctrl-single,pins = <
+ 0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+ >;
+ };
+
+ usb2_pins: usb2_pins {
+ pinctrl-single,pins = <
+ 0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+ >;
+ };
};
&i2c0 {
regulator-always-on;
};
+ power-button {
+ compatible = "ti,tps65218-pwrbutton";
+ status = "okay";
+ interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ };
};
at24@50 {
&usb1 {
dr_mode = "peripheral";
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
};
&usb2_phy2 {
&usb2 {
dr_mode = "host";
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_pins>;
};
&qspi {
&wdt {
status = "okay";
};
+
+&cpu {
+ cpu0-supply = <&dcdc2>;
+};
+
+&vpfe0 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe0_pins_default>;
+ pinctrl-1 = <&vpfe0_pins_sleep>;
+
+ /* Camera port */
+ port {
+ vpfe0_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
+
+ vpfe1_pins_default: vpfe1_pins_default {
+ pinctrl-single,pins = <
+ 0x1cc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */
+ 0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */
+ 0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */
+ 0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */
+ 0x1dc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */
+ 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */
+ 0x1ec (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */
+ 0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */
+ 0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */
+ 0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */
+ 0x1fc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */
+ 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */
+ 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */
+ >;
+ };
+
+ vpfe1_pins_sleep: vpfe1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ >;
+ };
};
matrix_keypad: matrix_keypad@0 {
};
};
};
+
+&vpfe1 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&vpfe1_pins_default>;
+ pinctrl-1 = <&vpfe1_pins_sleep>;
+
+ port {
+ vpfe1_ep: endpoint {
+ /* remote-endpoint = <&sensor>; add once we have it */
+ ti,am437x-vpfe-interface = <0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+};
default-state = "off";
};
};
+
+ gpio_fan: gpio_fan {
+ /* Based on 5v 500mA AFB02505HHB */
+ compatible = "gpio-fan";
+ gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <0 0>,
+ <13000 1>;
+ };
};
&dra7_pmx_core {
>;
};
+ cpsw_pins_default: cpsw_pins_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
+ 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
+ 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
+ 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
+ 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
+ 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
+ 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
+ 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
+ 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
+ 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
+ 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
+ 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
+
+ /* Slave 2 */
+ 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
+ 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
+ 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
+ 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
+ 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
+ 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
+ 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
+ 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
+ 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
+ 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
+ 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
+ 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
+ >;
+
+ };
+
+ cpsw_pins_sleep: cpsw_pins_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x250 (PIN_INPUT | MUX_MODE15)
+ 0x254 (PIN_INPUT | MUX_MODE15)
+ 0x258 (PIN_INPUT | MUX_MODE15)
+ 0x25c (PIN_INPUT | MUX_MODE15)
+ 0x260 (PIN_INPUT | MUX_MODE15)
+ 0x264 (PIN_INPUT | MUX_MODE15)
+ 0x268 (PIN_INPUT | MUX_MODE15)
+ 0x26c (PIN_INPUT | MUX_MODE15)
+ 0x270 (PIN_INPUT | MUX_MODE15)
+ 0x274 (PIN_INPUT | MUX_MODE15)
+ 0x278 (PIN_INPUT | MUX_MODE15)
+ 0x27c (PIN_INPUT | MUX_MODE15)
+
+ /* Slave 2 */
+ 0x198 (PIN_INPUT | MUX_MODE15)
+ 0x19c (PIN_INPUT | MUX_MODE15)
+ 0x1a0 (PIN_INPUT | MUX_MODE15)
+ 0x1a4 (PIN_INPUT | MUX_MODE15)
+ 0x1a8 (PIN_INPUT | MUX_MODE15)
+ 0x1ac (PIN_INPUT | MUX_MODE15)
+ 0x1b0 (PIN_INPUT | MUX_MODE15)
+ 0x1b4 (PIN_INPUT | MUX_MODE15)
+ 0x1b8 (PIN_INPUT | MUX_MODE15)
+ 0x1bc (PIN_INPUT | MUX_MODE15)
+ 0x1c0 (PIN_INPUT | MUX_MODE15)
+ 0x1c4 (PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
+ davinci_mdio_pins_default: davinci_mdio_pins_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
+ 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
+ >;
+ };
+
+ davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+ pinctrl-single,pins = <
+ 0x23c (PIN_INPUT | MUX_MODE15)
+ 0x240 (PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
tps659038_pins_default: tps659038_pins_default {
pinctrl-single,pins = <
0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
wakeup-source;
ti,palmas-long-press-seconds = <12>;
};
+
+ tps659038_gpio: tps659038_gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
tmp102: tmp102@48 {
pinctrl-0 = <&uart3_pins_default>;
};
+&mac {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_pins_default>;
+ pinctrl-1 = <&cpsw_pins_sleep>;
+ dual_emac;
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <2>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_pins_default>;
+ pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
&mmc1 {
status = "okay";
compatible = "linux,spdif-dir";
};
};
-
-&pinctrl {
- /*
- * These pins might be muxed as I2S by
- * the bootloader, but it conflicts
- * with the real I2S pins that are
- * muxed using i2s_pins. We must mux
- * those pins to a function other than
- * I2S.
- */
- pinctrl-0 = <&hog_pins1 &hog_pins2>;
- pinctrl-names = "default";
-
- hog_pins1: hog-pins1 {
- marvell,pins = "mpp6", "mpp8", "mpp10",
- "mpp12", "mpp13";
- marvell,function = "gpio";
- };
-
- hog_pins2: hog-pins2 {
- marvell,pins = "mpp5", "mpp7", "mpp9";
- marvell,function = "gpo";
- };
-};
};
soc {
- compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus";
+ compatible = "marvell,armada375-mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
soc {
internal-regs {
- pinctrl {
+ pinctrl@18000 {
compatible = "marvell,mv88f6810-pinctrl";
- reg = <0x18000 0x20>;
};
};
--- /dev/null
+/*
+ * Device Tree file for Marvell Armada 385 Access Point Development board
+ * (DB-88F6820-AP)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Nadav Haklai <nadavh@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Marvell Armada 385 Access Point Development Board";
+ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000>; /* 2GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+ spi1: spi@10680 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p128";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <54000000>;
+ };
+ };
+
+ i2c0: i2c@11000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ /*
+ * This bus is wired to two EEPROM
+ * sockets, one of which holding the
+ * board ID used by the bootloader.
+ * Erasing this EEPROM's content will
+ * brick the board.
+ * Use this bus with caution.
+ */
+ };
+
+ mdio@72004 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy1: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ phy2: ethernet-phy@6 {
+ reg = <6>;
+ };
+ };
+
+ /* UART0 is exposed through the JP8 connector */
+ uart0: serial@12000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+ };
+
+ /*
+ * UART1 is exposed through a FTDI chip
+ * wired to the mini-USB connector
+ */
+ uart1: serial@12100 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+ };
+
+ ethernet@30000 {
+ status = "okay";
+ phy = <&phy2>;
+ phy-mode = "sgmii";
+ };
+
+ ethernet@34000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "sgmii";
+ };
+
+ ethernet@70000 {
+ pinctrl-names = "default";
+
+ /*
+ * The Reference Clock 0 is used to
+ * provide a clock to the PHY
+ */
+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ /*
+ * The three PCIe units are accessible through
+ * standard mini-PCIe slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+
+ pcie@3,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ };
+ };
+};
+++ /dev/null
-/*
- * Device Tree file for Marvell Armada 385 evaluation board
- * (DB-88F6820)
- *
- * Copyright (C) 2014 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-/ {
- model = "Marvell Armada 385 Development Board";
- compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380";
-
- chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>; /* 256 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
- internal-regs {
- spi@10600 {
- status = "okay";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25q32";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
- };
- };
-
- i2c@11000 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- i2c@11100 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- serial@12000 {
- status = "okay";
- };
-
- ethernet@30000 {
- status = "okay";
- phy = <&phy1>;
- phy-mode = "rgmii-id";
- };
-
- usb@50000 {
- status = "ok";
- };
-
- ethernet@70000 {
- status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- };
-
- mdio {
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- sata@a8000 {
- status = "okay";
- };
-
- sata@e0000 {
- status = "okay";
- };
-
- flash@d0000 {
- status = "okay";
- num-cs = <1>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0 0x800000>;
- };
- partition@800000 {
- label = "Linux";
- reg = <0x800000 0x800000>;
- };
- partition@1000000 {
- label = "Filesystem";
- reg = <0x1000000 0x3f000000>;
- };
- };
-
- sdhci@d8000 {
- broken-cd;
- wp-inverted;
- bus-width = <8>;
- status = "okay";
- no-1-8-v;
- };
-
- usb3@f0000 {
- status = "okay";
- };
-
- usb3@f8000 {
- status = "okay";
- };
- };
-
- pcie-controller {
- status = "okay";
- /*
- * The two PCIe units are accessible through
- * standard PCIe slots on the board.
- */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie@2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
- };
- };
-};
+++ /dev/null
-/*
- * Device Tree file for Marvell Armada 385 Reference Design board
- * (RD-88F6820-AP)
- *
- * Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-/ {
- model = "Marvell Armada 385 Reference Design";
- compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
-
- chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>; /* 256 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
- internal-regs {
- spi@10600 {
- status = "okay";
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p128";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
- };
- };
-
- i2c@11000 {
- status = "okay";
- clock-frequency = <100000>;
- };
-
- serial@12000 {
- status = "okay";
- };
-
- ethernet@30000 {
- status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- };
-
- ethernet@70000 {
- status = "okay";
- phy = <&phy1>;
- phy-mode = "rgmii-id";
- };
-
-
- mdio {
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- usb3@f0000 {
- status = "okay";
- };
- };
-
- pcie-controller {
- status = "okay";
- /*
- * One PCIe units is accessible through
- * standard PCIe slot on the board.
- */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- };
- };
-};
soc {
internal-regs {
- pinctrl {
+ pinctrl@18000 {
compatible = "marvell,mv88f6820-pinctrl";
- reg = <0x18000 0x20>;
};
};
--- /dev/null
+/*
+ * Device Tree file for Marvell Armada 388 evaluation board
+ * (DB-88F6820)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+ model = "Marvell Armada 385 Development Board";
+ compatible = "marvell,a385-db", "marvell,armada388",
+ "marvell,armada385", "marvell,armada380";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+ spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q32";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@11100 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ ethernet@30000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ usb@50000 {
+ status = "ok";
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ mdio@72004 {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ sata@a8000 {
+ status = "okay";
+ };
+
+ sata@e0000 {
+ status = "okay";
+ };
+
+ flash@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+
+ sdhci@d8000 {
+ broken-cd;
+ wp-inverted;
+ bus-width = <8>;
+ status = "okay";
+ no-1-8-v;
+ };
+
+ usb3@f0000 {
+ status = "okay";
+ };
+
+ usb3@f8000 {
+ status = "okay";
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for Marvell Armada 385 development board
+ * (RD-88F6820-GP)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Marvell Armada 385 GP";
+ compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000>; /* 2 GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+ spi@10600 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p128";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ };
+ };
+
+ i2c@11000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+ /*
+ * The EEPROM located at adresse 54 is needed
+ * for the boot - DO NOT ERASE IT -
+ */
+
+ expander0: pca9555@20 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pca0_pins>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x20>;
+ };
+
+ expander1: pca9555@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio0>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x21>;
+ };
+
+ };
+
+ serial@12000 {
+ /*
+ * Exported on the micro USB connector CON16
+ * through an FTDI
+ */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+ };
+
+ /* GE1 CON15 */
+ ethernet@30000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ /* CON4 */
+ usb@50000 {
+ vcc-supply = <®_usb2_0_vbus>;
+ status = "okay";
+ };
+
+ /* GE0 CON1 */
+ ethernet@70000 {
+ pinctrl-names = "default";
+ /*
+ * The Reference Clock 0 is used to provide a
+ * clock to the PHY
+ */
+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+
+ mdio@72004 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ sata@a8000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sata0_pins>, <&sata1_pins>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ target-supply = <®_5v_sata0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ target-supply = <®_5v_sata1>;
+ };
+ };
+
+ sata@e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata2: sata-port@0 {
+ reg = <0>;
+ target-supply = <®_5v_sata2>;
+ };
+
+ sata3: sata-port@1 {
+ reg = <1>;
+ target-supply = <®_5v_sata3>;
+ };
+ };
+
+ sdhci@d8000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
+ cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ wp-inverted;
+ bus-width = <8>;
+ status = "okay";
+ };
+
+ /* CON5 */
+ usb3@f0000 {
+ vcc-supply = <®_usb2_1_vbus>;
+ status = "okay";
+ };
+
+ /* CON7 */
+ usb3@f8000 {
+ vcc-supply = <®_usb3_vbus>;
+ status = "okay";
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * One PCIe units is accessible through
+ * standard PCIe slot on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /*
+ * The two other PCIe units are accessible
+ * through mini PCIe slot on the board.
+ */
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ pcie@3,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 3000 1>;
+ };
+ };
+
+ reg_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_usb2_0_vbus: v5-vbus0 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-vbus0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_usb2_1_vbus: v5-vbus1 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-vbus1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_usb2_1_vbus: v5-vbus1 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-vbus1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_sata0: pwr-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "pwr_en_sata0";
+ enable-active-high;
+ regulator-always-on;
+
+ };
+
+ reg_5v_sata0: v5-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-sata0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <®_sata0>;
+ };
+
+ reg_12v_sata0: v12-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "v12.0-sata0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ vin-supply = <®_sata0>;
+ };
+
+ reg_sata1: pwr-sata1 {
+ regulator-name = "pwr_en_sata1";
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_5v_sata1: v5-sata1 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-sata1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <®_sata1>;
+ };
+
+ reg_12v_sata1: v12-sata1 {
+ compatible = "regulator-fixed";
+ regulator-name = "v12.0-sata1";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ vin-supply = <®_sata1>;
+ };
+
+ reg_sata2: pwr-sata2 {
+ compatible = "regulator-fixed";
+ regulator-name = "pwr_en_sata2";
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_5v_sata2: v5-sata2 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-sata2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <®_sata2>;
+ };
+
+ reg_12v_sata2: v12-sata2 {
+ compatible = "regulator-fixed";
+ regulator-name = "v12.0-sata2";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ vin-supply = <®_sata2>;
+ };
+
+ reg_sata3: pwr-sata3 {
+ compatible = "regulator-fixed";
+ regulator-name = "pwr_en_sata3";
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_5v_sata3: v5-sata3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-sata3";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <®_sata3>;
+ };
+
+ reg_12v_sata3: v12-sata3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v12.0-sata3";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ vin-supply = <®_sata3>;
+ };
+};
+
+&pinctrl {
+ pca0_pins: pca0_pins {
+ marvell,pins = "mpp18";
+ marvell,function = "gpio";
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for Marvell Armada 388 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+ model = "Marvell Armada 385 Reference Design";
+ compatible = "marvell,a385-rd", "marvell,armada388",
+ "marvell,armada385","marvell,armada380";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+ spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p128";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ ethernet@30000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+
+ mdio@72004 {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ usb3@f0000 {
+ status = "okay";
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * One PCIe units is accessible through
+ * standard PCIe slot on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Include file for Marvell Armada 388 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ * The main difference with the Armada 385 is that the 388 can handle two more
+ * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
+ * property and the name of the SoC, and add the second SATA host which control
+ * the 2 other ports.
+ */
+
+#include "armada-385.dtsi"
+
+/ {
+ model = "Marvell Armada 388 family SoC";
+ compatible = "marvell,armada388", "marvell,armada385",
+ "marvell,armada380";
+
+ soc {
+ internal-regs {
+ pinctrl@18000 {
+ compatible = "marvell,mv88f6828-pinctrl";
+ };
+
+ sata@e0000 {
+ compatible = "marvell,armada-380-ahci";
+ reg = <0xe0000 0x2000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 30>;
+ status = "disabled";
+ };
+
+ };
+ };
+};
};
soc {
- compatible = "marvell,armada380-mbus", "marvell,armada370-mbus",
- "simple-bus";
+ compatible = "marvell,armada380-mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
status = "disabled";
};
- serial@12000 {
+ uart0: serial@12000 {
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
status = "disabled";
};
- pinctrl {
- compatible = "marvell,mv88f6820-pinctrl";
+ pinctrl: pinctrl@18000 {
reg = <0x18000 0x20>;
+
+ ge0_rgmii_pins: ge-rgmii-pins-0 {
+ marvell,pins = "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11",
+ "mpp12", "mpp13", "mpp14",
+ "mpp15", "mpp16", "mpp17";
+ marvell,function = "ge0";
+ };
+
+ ge1_rgmii_pins: ge-rgmii-pins-1 {
+ marvell,pins = "mpp21", "mpp27", "mpp28",
+ "mpp29", "mpp30", "mpp31",
+ "mpp32", "mpp37", "mpp38",
+ "mpp39", "mpp40", "mpp41";
+ marvell,function = "ge1";
+ };
+
+ i2c0_pins: i2c-pins-0 {
+ marvell,pins = "mpp2", "mpp3";
+ marvell,function = "i2c0";
+ };
+
+ mdio_pins: mdio-pins {
+ marvell,pins = "mpp4", "mpp5";
+ marvell,function = "ge";
+ };
+
+ ref_clk0_pins: ref-clk-pins-0 {
+ marvell,pins = "mpp45";
+ marvell,function = "ref";
+ };
+
+ ref_clk1_pins: ref-clk-pins-1 {
+ marvell,pins = "mpp46";
+ marvell,function = "ref";
+ };
+
+ spi0_pins: spi-pins-0 {
+ marvell,pins = "mpp22", "mpp23", "mpp24",
+ "mpp25";
+ marvell,function = "spi0";
+ };
+
+ spi1_pins: spi-pins-1 {
+ marvell,pins = "mpp56", "mpp57", "mpp58",
+ "mpp59";
+ marvell,function = "spi1";
+ };
+
+ uart0_pins: uart-pins-0 {
+ marvell,pins = "mpp0", "mpp1";
+ marvell,function = "ua0";
+ };
+
+ uart1_pins: uart-pins-1 {
+ marvell,pins = "mpp19", "mpp20";
+ marvell,function = "ua1";
+ };
+
+ sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp48", "mpp49", "mpp50",
+ "mpp52", "mpp53", "mpp54",
+ "mpp55", "mpp57", "mpp58",
+ "mpp59";
+ marvell,function = "sd0";
+ };
+
+ sata0_pins: sata-pins-0 {
+ marvell,pins = "mpp20";
+ marvell,function = "sata0";
+ };
+
+ sata1_pins: sata-pins-1 {
+ marvell,pins = "mpp19";
+ marvell,function = "sata1";
+ };
+
+ sata2_pins: sata-pins-2 {
+ marvell,pins = "mpp47";
+ marvell,function = "sata2";
+ };
+
+ sata3_pins: sata-pins-3 {
+ marvell,pins = "mpp44";
+ marvell,function = "sata3";
+ };
};
gpio0: gpio@18100 {
status = "disabled";
};
- mdio {
+ mdio@72004 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
*
* Note: this board is shipped with a new generation boot loader that
* remaps internal registers at 0xf1000000. Therefore, if earlyprintk
- * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
- * used.
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
+ * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
*
* Copyright (C) 2013 Marvell
*
};
internal-regs {
+ /* UART0 */
serial@12000 {
status = "okay";
};
+ /* UART1 */
serial@12100 {
status = "okay";
};
};
};
+ sram: sram@00200000 {
+ compatible = "mmio-sram";
+ reg = <0x00200000 0x4000>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
};
+ rtc: rtc@fffffe00 {
+ compatible = "atmel,at91rm9200-rtc";
+ reg = <0xfffffe00 0x40>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ status = "disabled";
+ };
+
tcb0: timer@fffa0000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffa0000 0x100>;
dbgu: serial@fffff200 {
status = "okay";
};
+
+ rtc: rtc@fffffe00 {
+ status = "okay";
+ };
};
usb0: ohci@00300000 {
};
};
+ sram0: sram@002ff000 {
+ compatible = "mmio-sram";
+ reg = <0x002ff000 0x2000>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
};
};
+ sram: sram@00300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x28000>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
};
};
+ sram0: sram@00300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x14000>;
+ };
+
+ sram1: sram@00500000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x4000>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
reg = <17>;
};
- ac91_clk: ac97_clk {
+ ac97_clk: ac97_clk {
#clock-cells = <0>;
reg = <18>;
};
};
};
+ ac97 {
+ pinctrl_ac97: ac97-0 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A AC97FS pin */
+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A AC97CK pin */
+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A AC97TX pin */
+ AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A AC97RX pin */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
status = "disabled";
};
+ ac97: sound@fffa0000 {
+ compatible = "atmel,at91sam9263-ac97c";
+ reg = <0xfffa0000 0x4000>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ac97>;
+ clocks = <&ac97_clk>;
+ clock-names = "ac97_clk";
+ status = "disabled";
+ };
+
macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
reg = <0x20000000 0x08000000>;
};
+ sram0: sram@002ff000 {
+ status = "disabled";
+ };
+
+ sram1: sram@002fc000 {
+ compatible = "mmio-sram";
+ reg = <0x002fc000 0x8000>;
+ };
+
ahb {
apb {
i2c0: i2c@fffac000 {
};
};
+ sram: sram@00300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x10000>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- //TODO
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- //TODO
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
status = "disabled";
};
};
+ sram: sram@00300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x8000>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
status = "disabled";
};
+ rtc@fffffeb0 {
+ compatible = "atmel,at91rm9200-rtc";
+ reg = <0xfffffeb0 0x40>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ status = "disabled";
+ };
+
pwm0: pwm@f8034000 {
compatible = "atmel,at91sam9rl-pwm";
reg = <0xf8034000 0x300>;
status = "okay";
wm8904: codec@1a {
- compatible = "wm8904";
+ compatible = "wlf,wm8904";
reg = <0x1a>;
clocks = <&pck0>;
clock-names = "mclk";
};
};
+ sram: sram@00300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x10000>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
};
};
+ sram: sram@00300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x8000>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
};
usb2: gadget@f803c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_board_usb2>;
atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
status = "okay";
};
<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */
};
};
+
+ usb2 {
+ pinctrl_board_usb2: usb2-board {
+ atmel,pins =
+ <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */
+ };
+ };
};
spi0: spi@f0000000 {
--- /dev/null
+/*
+ * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
+ *
+ * Copyright (C) 2015 Atmel,
+ * 2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9XE family SoC";
+ compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
+
+ sram0: sram@002ff000 {
+ status = "disabled";
+ };
+
+ sram1: sram@00300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x4000>;
+ };
+};
--- /dev/null
+/*
+ * DTS file for CSR SiRFatlas7 Evaluation Board
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "atlas7.dtsi"
+
+/ {
+ model = "CSR SiRFatlas7 Evaluation Board";
+ compatible = "sirf,atlas7-cb", "sirf,atlas7";
+
+ chosen {
+ bootargs = "console=ttySiRF1,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vpp_reserved: vpp_mem@5e800000 {
+ compatible = "sirf,reserved-memory";
+ reg = <0x5e800000 0x800000>;
+ };
+
+ nanddisk_reserved: nanddisk@46000000 {
+ reg = <0x46000000 0x200000>;
+ no-map;
+ };
+ };
+
+
+ noc {
+ mediam {
+ nand@17050000 {
+ memory-region = <&nanddisk_reserved>;
+ };
+ };
+
+ gnssm {
+ spi1: spi@18200000 {
+ status = "okay";
+ spiflash: macronix@0{
+ status = "okay";
+ compatible = "macronix,mx25l6405d";
+ reg = <0>;
+ spi-max-frequency = <37500000>;
+ spi-cpha;
+ spi-cpol;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partitions@0 {
+ label = "myspiboot";
+ reg = <0x0 0x800000>;
+ };
+ };
+ };
+ };
+
+ btm {
+ uart6: uart@11000000 {
+ status = "okay";
+ sirf,uart-has-rtscts;
+ };
+ };
+
+ disp-iobg {
+ vpp@13110000 {
+ memory-region = <&vpp_reserved>;
+ };
+ };
+
+ display0: display@0 {
+ compatible = "lvds-panel";
+ source = "lvds.0";
+
+ bl-gpios = <&gpio_1 63 0>;
+ data-lines = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <60000000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hfront-porch = <220>;
+ hback-porch = <100>;
+ hsync-len = <1>;
+ vback-porch = <10>;
+ vfront-porch = <25>;
+ vsync-len = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * DTS file for CSR SiRFatlas7 SoC
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+ compatible = "sirf,atlas7";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
+ serial9 = &usp2;
+ };
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <1>;
+ };
+ };
+
+ noc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x10000000 0x10000000 0xc0000000>;
+
+ gic: interrupt-controller@10301000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x10301000 0x1000>,
+ <0x10302000 0x0100>;
+ };
+
+ pmu_regulator: pmu_regulator@10E30020 {
+ compatible = "sirf,atlas7-pmu-ldo";
+ reg = <0x10E30020 0x4>;
+ ldo: ldo {
+ regulator-name = "ldo";
+ };
+ };
+
+ atlas7_codec: atlas7_codec@10E30000 {
+ #sound-dai-cells = <0>;
+ compatible = "sirf,atlas7-codec";
+ reg = <0x10E30000 0x400>;
+ clocks = <&car 62>;
+ ldo-supply = <&ldo>;
+ };
+
+ atlas7_iacc: atlas7_iacc@10D01000 {
+ #sound-dai-cells = <0>;
+ compatible = "sirf,atlas7-iacc";
+ reg = <0x10D01000 0x100>;
+ dmas = <&dmac3 0>, <&dmac3 7>, <&dmac3 8>,
+ <&dmac3 3>, <&dmac3 9>;
+ dma-names = "rx", "tx0", "tx1", "tx2", "tx3";
+ clocks = <&car 62>;
+ };
+
+ ipc@13240000 {
+ compatible = "sirf,atlas7-ipc";
+ ranges = <0x13240000 0x13240000 0x00010000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ hwspinlock {
+ compatible = "sirf,hwspinlock";
+ reg = <0x13240000 0x00010000>;
+
+ num-spinlocks = <30>;
+ };
+
+ ns_m3_rproc@0 {
+ compatible = "sirf,ns2m30-rproc";
+ reg = <0x13240000 0x00010000>;
+ interrupts = <0 123 0>;
+ };
+
+ ns_m3_rproc@1 {
+ compatible = "sirf,ns2m31-rproc";
+ reg = <0x13240000 0x00010000>;
+ interrupts = <0 126 0>;
+ };
+
+ ns_kal_rproc@0 {
+ compatible = "sirf,ns2kal0-rproc";
+ reg = <0x13240000 0x00010000>;
+ interrupts = <0 124 0>;
+ };
+
+ ns_kal_rproc@1 {
+ compatible = "sirf,ns2kal1-rproc";
+ reg = <0x13240000 0x00010000>;
+ interrupts = <0 127 0>;
+ };
+ };
+
+ pinctrl: ioc@18880000 {
+ compatible = "sirf,atlas7-ioc";
+ reg = <0x18880000 0x1000>,
+ <0x10E40000 0x1000>;
+ };
+
+ pmipc {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x13240000 0x13240000 0x00010000>;
+ pmipc@0x13240000 {
+ compatible = "sirf,atlas7-pmipc";
+ reg = <0x13240000 0x00010000>;
+ };
+ };
+
+ dramfw {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x10830000 0x10830000 0x18000>;
+ dramfw@10820000 {
+ compatible = "sirf,nocfw-dramfw";
+ reg = <0x10830000 0x18000>;
+ };
+ };
+
+ spramfw {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x10250000 0x10250000 0x3000>;
+ spramfw@10820000 {
+ compatible = "sirf,nocfw-spramfw";
+ reg = <0x10250000 0x3000>;
+ };
+ };
+
+ cpum {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x10200000 0x10200000 0x3000>;
+ cpum@10200000 {
+ compatible = "sirf,nocfw-cpum";
+ reg = <0x10200000 0x3000>;
+ };
+ };
+
+ cgum {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x18641000 0x18641000 0x3000>,
+ <0x18620000 0x18620000 0x1000>;
+
+ cgum@18641000 {
+ compatible = "sirf,nocfw-cgum";
+ reg = <0x18641000 0x3000>;
+ };
+
+ car: clock-controller@18620000 {
+ compatible = "sirf,atlas7-car";
+ reg = <0x18620000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ };
+
+ gnssm {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x18000000 0x18000000 0x0000ffff>,
+ <0x18010000 0x18010000 0x1000>,
+ <0x18020000 0x18020000 0x1000>,
+ <0x18030000 0x18030000 0x1000>,
+ <0x18040000 0x18040000 0x1000>,
+ <0x18050000 0x18050000 0x1000>,
+ <0x18060000 0x18060000 0x1000>,
+ <0x18100000 0x18100000 0x3000>,
+ <0x18250000 0x18250000 0x10000>,
+ <0x18200000 0x18200000 0x1000>;
+
+ dmac0: dma-controller@18000000 {
+ cell-index = <0>;
+ compatible = "sirf,atlas7-dmac";
+ reg = <0x18000000 0x1000>;
+ interrupts = <0 12 0>;
+ clocks = <&car 89>;
+ dma-channels = <16>;
+ #dma-cells = <1>;
+ };
+
+ gnssmfw@0x18100000 {
+ compatible = "sirf,nocfw-gnssm";
+ reg = <0x18100000 0x3000>;
+ };
+
+ uart0: uart@18010000 {
+ cell-index = <0>;
+ compatible = "sirf,atlas7-uart";
+ reg = <0x18010000 0x1000>;
+ interrupts = <0 17 0>;
+ clocks = <&car 90>;
+ fifosize = <128>;
+ dmas = <&dmac0 3>, <&dmac0 2>;
+ dma-names = "rx", "tx";
+ };
+
+ uart1: uart@18020000 {
+ cell-index = <1>;
+ compatible = "sirf,atlas7-uart";
+ reg = <0x18020000 0x1000>;
+ interrupts = <0 18 0>;
+ clocks = <&car 88>;
+ fifosize = <32>;
+ };
+
+ uart2: uart@18030000 {
+ cell-index = <2>;
+ compatible = "sirf,atlas7-uart";
+ reg = <0x18030000 0x1000>;
+ interrupts = <0 19 0>;
+ clocks = <&car 91>;
+ fifosize = <128>;
+ dmas = <&dmac0 6>, <&dmac0 7>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ uart3: uart@18040000 {
+ cell-index = <3>;
+ compatible = "sirf,atlas7-uart";
+ reg = <0x18040000 0x1000>;
+ interrupts = <0 66 0>;
+ clocks = <&car 92>;
+ fifosize = <128>;
+ dmas = <&dmac0 4>, <&dmac0 5>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ uart4: uart@18050000 {
+ cell-index = <4>;
+ compatible = "sirf,atlas7-uart";
+ reg = <0x18050000 0x1000>;
+ interrupts = <0 69 0>;
+ clocks = <&car 93>;
+ fifosize = <128>;
+ dmas = <&dmac0 0>, <&dmac0 1>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ uart5: uart@18060000 {
+ cell-index = <5>;
+ compatible = "sirf,atlas7-uart";
+ reg = <0x18060000 0x1000>;
+ interrupts = <0 71 0>;
+ clocks = <&car 94>;
+ fifosize = <128>;
+ dmas = <&dmac0 8>, <&dmac0 9>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ dspub@18250000 {
+ compatible = "dx,cc44p";
+ reg = <0x18250000 0x10000>;
+ interrupts = <0 27 0>;
+ };
+
+ spi1: spi@18200000 {
+ compatible = "sirf,prima2-spi";
+ reg = <0x18200000 0x1000>;
+ interrupts = <0 16 0>;
+ clocks = <&car 95>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmac0 12>, <&dmac0 13>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+ };
+
+
+ gpum {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x13000000 0x13000000 0x3000>;
+ gpum@0x13000000 {
+ compatible = "sirf,nocfw-gpum";
+ reg = <0x13000000 0x3000>;
+ };
+ };
+
+ mediam {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x16000000 0x16000000 0x00200000>,
+ <0x17020000 0x17020000 0x1000>,
+ <0x17030000 0x17030000 0x1000>,
+ <0x17040000 0x17040000 0x1000>,
+ <0x17050000 0x17050000 0x10000>,
+ <0x17060000 0x17060000 0x200>,
+ <0x17060200 0x17060200 0x100>,
+ <0x17070000 0x17070000 0x200>,
+ <0x17070200 0x17070200 0x100>,
+ <0x170A0000 0x170A0000 0x3000>;
+
+ mediam@170A0000 {
+ compatible = "sirf,nocfw-mediam";
+ reg = <0x170A0000 0x3000>;
+ };
+
+ gpio_0: gpio_mediam@17040000 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "sirf,atlas7-gpio";
+ reg = <0x17040000 0x1000>;
+ interrupts = <0 13 0>, <0 14 0>;
+ clocks = <&car 107>;
+ clock-names = "gpio0_io";
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ nand@17050000 {
+ compatible = "sirf,atlas7-nand";
+ reg = <0x17050000 0x10000>;
+ interrupts = <0 41 0>;
+ clocks = <&car 108>, <&car 112>;
+ clock-names = "nand_io", "nand_nand";
+ };
+
+ sd0: sdhci@16000000 {
+ cell-index = <0>;
+ compatible = "sirf,atlas7-sdhc";
+ reg = <0x16000000 0x100000>;
+ interrupts = <0 38 0>;
+ clocks = <&car 109>, <&car 111>;
+ clock-names = "core", "iface";
+ wp-inverted;
+ non-removable;
+ status = "disabled";
+ bus-width = <8>;
+ };
+
+ sd1: sdhci@16100000 {
+ cell-index = <1>;
+ compatible = "sirf,atlas7-sdhc";
+ reg = <0x16100000 0x100000>;
+ interrupts = <0 38 0>;
+ clocks = <&car 109>, <&car 111>;
+ clock-names = "core", "iface";
+ non-removable;
+ status = "disabled";
+ bus-width = <8>;
+ };
+
+ usb0: usb@17060000 {
+ cell-index = <0>;
+ compatible = "sirf,atlas7-usb";
+ reg = <0x17060000 0x200>;
+ interrupts = <0 10 0>;
+ clocks = <&car 113>;
+ sirf,usbphy = <&usbphy0>;
+ phy_type = "utmi";
+ dr_mode = "otg";
+ maximum-speed = "high-speed";
+ status = "okay";
+ };
+
+ usb1: usb@17070000 {
+ cell-index = <1>;
+ compatible = "sirf,atlas7-usb";
+ reg = <0x17070000 0x200>;
+ interrupts = <0 11 0>;
+ clocks = <&car 114>;
+ sirf,usbphy = <&usbphy1>;
+ phy_type = "utmi";
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+ status = "okay";
+ };
+
+ usbphy0: usbphy@0 {
+ compatible = "sirf,atlas7-usbphy";
+ reg = <0x17060200 0x100>;
+ clocks = <&car 115>;
+ status = "okay";
+ };
+
+ usbphy1: usbphy@1 {
+ compatible = "sirf,atlas7-usbphy";
+ reg = <0x17070200 0x100>;
+ clocks = <&car 116>;
+ status = "okay";
+ };
+
+ i2c0: i2c@17020000 {
+ cell-index = <0>;
+ compatible = "sirf,prima2-i2c";
+ reg = <0x17020000 0x1000>;
+ interrupts = <0 24 0>;
+ clocks = <&car 105>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
+
+ vdifm {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x13290000 0x13290000 0x3000>,
+ <0x13300000 0x13300000 0x1000>,
+ <0x14200000 0x14200000 0x600000>;
+
+ vdifm@13290000 {
+ compatible = "sirf,nocfw-vdifm";
+ reg = <0x13290000 0x3000>;
+ };
+
+ gpio_1: gpio_vdifm@13300000 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "sirf,atlas7-gpio";
+ reg = <0x13300000 0x1000>;
+ interrupts = <0 43 0>, <0 44 0>, <0 45 0>;
+ clocks = <&car 84>;
+ clock-names = "gpio1_io";
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ sd2: sdhci@14200000 {
+ cell-index = <2>;
+ compatible = "sirf,atlas7-sdhc";
+ reg = <0x14200000 0x100000>;
+ interrupts = <0 23 0>;
+ clocks = <&car 70>, <&car 75>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ vqmmc-supply = <&vqmmc>;
+ vqmmc: vqmmc@2 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-name = "vqmmc-ldo";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-allow-bypass;
+ };
+ };
+
+ sd3: sdhci@14300000 {
+ cell-index = <3>;
+ compatible = "sirf,atlas7-sdhc";
+ reg = <0x14300000 0x100000>;
+ interrupts = <0 23 0>;
+ clocks = <&car 76>, <&car 81>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ bus-width = <4>;
+ };
+
+ sd5: sdhci@14500000 {
+ cell-index = <5>;
+ compatible = "sirf,atlas7-sdhc";
+ reg = <0x14500000 0x100000>;
+ interrupts = <0 39 0>;
+ clocks = <&car 71>, <&car 76>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ bus-width = <4>;
+ loop-dma;
+ };
+
+ sd6: sdhci@14600000 {
+ cell-index = <6>;
+ compatible = "sirf,atlas7-sdhc";
+ reg = <0x14600000 0x100000>;
+ interrupts = <0 98 0>;
+ clocks = <&car 72>, <&car 77>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ bus-width = <4>;
+ };
+
+ sd7: sdhci@14700000 {
+ cell-index = <7>;
+ compatible = "sirf,atlas7-sdhc";
+ reg = <0x14700000 0x100000>;
+ interrupts = <0 98 0>;
+ clocks = <&car 72>, <&car 77>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ bus-width = <4>;
+ };
+ };
+
+ audiom {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x10d50000 0x10d50000 0x0000ffff>,
+ <0x10d60000 0x10d60000 0x0000ffff>,
+ <0x10d80000 0x10d80000 0x0000ffff>,
+ <0x10d90000 0x10d90000 0x0000ffff>,
+ <0x10ED0000 0x10ED0000 0x3000>,
+ <0x10dc8000 0x10dc8000 0x1000>,
+ <0x10dc0000 0x10dc0000 0x1000>,
+ <0x10db0000 0x10db0000 0x4000>,
+ <0x10d40000 0x10d40000 0x1000>,
+ <0x10d30000 0x10d30000 0x1000>;
+
+ timer@10dc0000 {
+ compatible = "sirf,atlas7-tick";
+ reg = <0x10dc0000 0x1000>;
+ interrupts = <0 0 0>,
+ <0 1 0>,
+ <0 2 0>,
+ <0 49 0>,
+ <0 50 0>,
+ <0 51 0>;
+ clocks = <&car 47>;
+ };
+
+ timerb@10dc8000 {
+ compatible = "sirf,atlas7-tick";
+ reg = <0x10dc8000 0x1000>;
+ interrupts = <0 74 0>,
+ <0 75 0>,
+ <0 76 0>,
+ <0 77 0>,
+ <0 78 0>,
+ <0 79 0>;
+ clocks = <&car 47>;
+ };
+
+ vip0@10db0000 {
+ compatible = "sirf,atlas7-vip0";
+ reg = <0x10db0000 0x2000>;
+ interrupts = <0 85 0>;
+ sirf,vip_cma_size = <0xC00000>;
+ };
+
+ cvd@10db2000 {
+ compatible = "sirf,cvd";
+ reg = <0x10db2000 0x2000>;
+ clocks = <&car 46>;
+ };
+
+ dmac2: dma-controller@10d50000 {
+ cell-index = <2>;
+ compatible = "sirf,atlas7-dmac";
+ reg = <0x10d50000 0xffff>;
+ interrupts = <0 55 0>;
+ clocks = <&car 60>;
+ dma-channels = <16>;
+ #dma-cells = <1>;
+ };
+
+ dmac3: dma-controller@10d60000 {
+ cell-index = <3>;
+ compatible = "sirf,atlas7-dmac";
+ reg = <0x10d60000 0xffff>;
+ interrupts = <0 56 0>;
+ clocks = <&car 61>;
+ dma-channels = <16>;
+ #dma-cells = <1>;
+ };
+
+ adc: adc@10d80000 {
+ compatible = "sirf,atlas7-adc";
+ reg = <0x10d80000 0xffff>;
+ interrupts = <0 34 0>;
+ clocks = <&car 49>;
+ #io-channel-cells = <1>;
+ };
+
+ pulsec@10d90000 {
+ compatible = "sirf,prima2-pulsec";
+ reg = <0x10d90000 0xffff>;
+ interrupts = <0 42 0>;
+ clocks = <&car 54>;
+ };
+
+ audiom@10ED0000 {
+ compatible = "sirf,nocfw-audiom";
+ reg = <0x10ED0000 0x3000>;
+ interrupts = <0 102 0>;
+ };
+
+ usp1: usp@10d30000 {
+ cell-index = <1>;
+ reg = <0x10d30000 0x1000>;
+ fifosize = <512>;
+ clocks = <&car 58>;
+ dmas = <&dmac2 6>, <&dmac2 7>;
+ dma-names = "rx", "tx";
+ };
+
+ usp2: usp@10d40000 {
+ cell-index = <2>;
+ reg = <0x10d40000 0x1000>;
+ interrupts = <0 22 0>;
+ clocks = <&car 59>;
+ dmas = <&dmac2 12>, <&dmac2 13>;
+ dma-names = "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ ddrm {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x10820000 0x10820000 0x3000>,
+ <0x10800000 0x10800000 0x2000>;
+ ddrm@10820000 {
+ compatible = "sirf,nocfw-ddrm";
+ reg = <0x10820000 0x3000>;
+ interrupts = <0 105 0>;
+ };
+
+ memory-controller@0x10800000 {
+ compatible = "sirf,atlas7-memc";
+ reg = <0x10800000 0x2000>;
+ };
+
+ };
+
+ btm {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x11002000 0x11002000 0x0000ffff>,
+ <0x11010000 0x11010000 0x3000>,
+ <0x11000000 0x11000000 0x1000>,
+ <0x11001000 0x11001000 0x1000>;
+
+ dmac4: dma-controller@11002000 {
+ cell-index = <4>;
+ compatible = "sirf,atlas7-dmac";
+ reg = <0x11002000 0x1000>;
+ interrupts = <0 99 0>;
+ clocks = <&car 130>;
+ dma-channels = <16>;
+ #dma-cells = <1>;
+ };
+ uart6: uart@11000000 {
+ cell-index = <6>;
+ compatible = "sirf,atlas7-bt-uart",
+ "sirf,atlas7-uart";
+ reg = <0x11000000 0x1000>;
+ interrupts = <0 100 0>;
+ clocks = <&car 131>, <&car 133>, <&car 134>;
+ clock-names = "uart", "general", "noc";
+ fifosize = <128>;
+ dmas = <&dmac4 12>, <&dmac4 13>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ usp3: usp@11001000 {
+ compatible = "sirf,atlas7-bt-usp",
+ "sirf,prima2-usp-pcm";
+ cell-index = <3>;
+ reg = <0x11001000 0x1000>;
+ fifosize = <512>;
+ clocks = <&car 132>, <&car 129>, <&car 133>,
+ <&car 134>, <&car 135>;
+ clock-names = "usp3_io", "a7ca_btss", "a7ca_io",
+ "noc_btm_io", "thbtm_io";
+ dmas = <&dmac4 0>, <&dmac4 1>;
+ dma-names = "rx", "tx";
+ };
+
+ btm@11010000 {
+ compatible = "sirf,nocfw-btm";
+ reg = <0x11010000 0x3000>;
+ };
+ };
+
+ rtcm {
+ compatible = "arteris, flexnoc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x18810000 0x18810000 0x3000>,
+ <0x18840000 0x18840000 0x1000>,
+ <0x18890000 0x18890000 0x1000>,
+ <0x188B0000 0x188B0000 0x10000>,
+ <0x188D0000 0x188D0000 0x1000>;
+ rtcm@18810000 {
+ compatible = "sirf,nocfw-rtcm";
+ reg = <0x18810000 0x3000>;
+ interrupts = <0 109 0>;
+ };
+
+ gpio_2: gpio_rtcm@18890000 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "sirf,atlas7-gpio";
+ reg = <0x18890000 0x1000>;
+ interrupts = <0 47 0>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ rtc-iobg@18840000 {
+ compatible = "sirf,prima2-rtciobg",
+ "sirf-prima2-rtciobg-bus",
+ "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x18840000 0x1000>;
+
+ sysrtc@2000 {
+ compatible = "sirf,prima2-sysrtc";
+ reg = <0x2000 0x100>;
+ interrupts = <0 52 0>;
+ };
+ pwrc@3000 {
+ compatible = "sirf,atlas7-pwrc";
+ reg = <0x3000 0x100>;
+ };
+ };
+
+ qspi: flash@188B0000 {
+ cell-index = <0>;
+ compatible = "sirf,atlas7-qspi-nor";
+ reg = <0x188B0000 0x10000>;
+ interrupts = <0 15 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ retain@0x188D0000 {
+ compatible = "sirf,atlas7-retain";
+ reg = <0x188D0000 0x1000>;
+ };
+
+ };
+ disp-iobg {
+ /* lcdc0 */
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x13100000 0x13100000 0x20000>,
+ <0x10e10000 0x10e10000 0x10000>;
+
+ lcd@13100000 {
+ compatible = "sirf,atlas7-lcdc";
+ reg = <0x13100000 0x10000>;
+ interrupts = <0 30 0>;
+ clocks = <&car 79>;
+ };
+ vpp@13110000 {
+ compatible = "sirf,atlas7-vpp";
+ reg = <0x13110000 0x10000>;
+ interrupts = <0 31 0>;
+ clocks = <&car 78>;
+ resets = <&car 29>;
+ };
+ lvds@10e10000 {
+ compatible = "sirf,atlas7-lvdsc";
+ reg = <0x10e10000 0x10000>;
+ interrupts = <0 64 0>;
+ clocks = <&car 54>;
+ resets = <&car 29>;
+ };
+
+ };
+
+ graphics-iobg {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x12000000 0x12000000 0x1000000>;
+
+ graphics@12000000 {
+ compatible = "powervr,sgx531";
+ reg = <0x12000000 0x1000000>;
+ interrupts = <0 6 0>;
+ clocks = <&car 126>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP202/209 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP20X.php
+ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
+ */
+
+&axp209 {
+ compatible = "x-powers,axp209";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ regulators {
+ /* Default work frequency for buck regulators */
+ x-powers,dcdc-freq = <1500>;
+
+ reg_dcdc2: dcdc2 {
+ regulator-name = "dcdc2";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-name = "dcdc3";
+ };
+
+ reg_ldo1: ldo1 {
+ /* LDO1 is a fixed output regulator */
+ regulator-always-on;
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "ldo1";
+ };
+
+ reg_ldo2: ldo2 {
+ regulator-name = "ldo2";
+ };
+
+ reg_ldo3: ldo3 {
+ regulator-name = "ldo3";
+ };
+
+ reg_ldo4: ldo4 {
+ regulator-name = "ldo4";
+ };
+
+ reg_ldo5: ldo5 {
+ regulator-name = "ldo5";
+ };
+ };
+};
reg = <0x00000000 0x08000000>;
};
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+ gpio-sck = <&chipcommon 7 0>;
+ gpio-mosi = <&chipcommon 4 0>;
+ cs-gpios = <&chipcommon 6 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hc595: gpio_spi@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ registers-number = <1>;
+ spi-max-frequency = <100000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power0 {
+ label = "bcm53xx:red:power";
+ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ power1 {
+ label = "bcm53xx:white:power";
+ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ router0 {
+ label = "bcm53xx:blue:router";
+ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ router1 {
+ label = "bcm53xx:amber:router";
+ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan {
+ label = "bcm53xx:blue:wan";
+ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ wireless0 {
+ label = "bcm53xx:blue:wireless";
+ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wireless1 {
+ label = "bcm53xx:amber:wireless";
+ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- poll-interval = <200>;
restart {
label = "Reset";
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Luxul XWC-1000
+ *
+ * Copyright 2014 Luxul Inc.
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ compatible = "luxul,xwc-1000", "brcm,bcm4708";
+ model = "Luxul XWC-1000 (BCM4708)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ axi@18000000 {
+ nand@28000 {
+ reg = <0x00028000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi";
+ reg = <0x00000000 0x08000000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- poll-interval = <200>;
wps {
label = "WPS";
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- poll-interval = <200>;
wps {
label = "WPS";
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- poll-interval = <200>;
restart {
label = "Reset";
reg = <0x00000000 0x08000000>;
};
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+ gpio-sck = <&chipcommon 7 0>;
+ gpio-mosi = <&chipcommon 4 0>;
+ cs-gpios = <&chipcommon 6 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hc595: gpio_spi@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ registers-number = <1>;
+ spi-max-frequency = <100000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power0 {
+ label = "bcm53xx:green:power";
+ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ power1 {
+ label = "bcm53xx:red:power";
+ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ router0 {
+ label = "bcm53xx:green:router";
+ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ router1 {
+ label = "bcm53xx:amber:router";
+ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan {
+ label = "bcm53xx:green:wan";
+ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ wireless0 {
+ label = "bcm53xx:green:wireless";
+ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wireless1 {
+ label = "bcm53xx:amber:wireless";
+ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- poll-interval = <200>;
aoss {
label = "AOSS";
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-900DHP
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
+ model = "Buffalo WZR-900DHP (BCM47081)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
local-timer@ad0600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&chip CLKID_TWD>;
};
ranges = <0 0xf7000000 0x1000000>;
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
local-timer@ad0600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&chip CLKID_TWD>;
};
ranges = <0 0xf7000000 0x1000000>;
interrupt-parent = <&gic>;
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
clocks = <&chip CLKID_TWD>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
gic: interrupt-controller@ad1000 {
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dm816x.dtsi"
+
+/ {
+ model = "DM8168 EVM";
+ compatible = "ti,dm8168-evm", "ti,dm8168";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000 /* 1 GB */
+ 0xc0000000 0x40000000>; /* 1 GB */
+ };
+
+ /* FDC6331L controlled by SD_POW pin */
+ vmmcsd_fixed: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&dm816x_pinmux {
+ mcspi1_pins: pinmux_mcspi1_pins {
+ pinctrl-single,pins = <
+ DM816X_IOPAD(0x0a94, PIN_INPUT | MUX_MODE0) /* SPI_SCLK */
+ DM816X_IOPAD(0x0a98, PIN_OUTPUT | MUX_MODE0) /* SPI_SCS0 */
+ DM816X_IOPAD(0x0aa8, PIN_INPUT | MUX_MODE0) /* SPI_D0 */
+ DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */
+ >;
+ };
+};
+
+&i2c1 {
+ extgpio0: pcf8575@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c2 {
+ extgpio1: pcf8575@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ linux,mtd-name= "micron,mt29f2g16aadwp";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,nand-ecc-opt = "bch8";
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ partition@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition@0x80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1c0000>;
+ };
+ partition@0x1c0000 {
+ label = "Environment";
+ reg = <0x240000 0x40000>;
+ };
+ partition@0x280000 {
+ label = "Kernel";
+ reg = <0x280000 0x500000>;
+ };
+ partition@0x780000 {
+ label = "Filesystem";
+ reg = <0x780000 0xf880000>;
+ };
+ };
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
+ m25p80@0 {
+ compatible = "w25x32";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+};
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&scrm {
+ main_fapll: main_fapll {
+ #clock-cells = <1>;
+ compatible = "ti,dm816-fapll-clock";
+ reg = <0x400 0x40>;
+ clocks = <&sys_clkin_ck &sys_clkin_ck>;
+ clock-indices = <1>, <2>, <3>, <4>, <5>,
+ <6>, <7>;
+ clock-output-names = "main_pll_clk1",
+ "main_pll_clk2",
+ "main_pll_clk3",
+ "main_pll_clk4",
+ "main_pll_clk5",
+ "main_pll_clk6",
+ "main_pll_clk7";
+ };
+
+ ddr_fapll: ddr_fapll {
+ #clock-cells = <1>;
+ compatible = "ti,dm816-fapll-clock";
+ reg = <0x440 0x30>;
+ clocks = <&sys_clkin_ck &sys_clkin_ck>;
+ clock-indices = <1>, <2>, <3>, <4>;
+ clock-output-names = "ddr_pll_clk1",
+ "ddr_pll_clk2",
+ "ddr_pll_clk3",
+ "ddr_pll_clk4";
+ };
+
+ video_fapll: video_fapll {
+ #clock-cells = <1>;
+ compatible = "ti,dm816-fapll-clock";
+ reg = <0x470 0x30>;
+ clocks = <&sys_clkin_ck &sys_clkin_ck>;
+ clock-indices = <1>, <2>, <3>;
+ clock-output-names = "video_pll_clk1",
+ "video_pll_clk2",
+ "video_pll_clk3";
+ };
+
+ audio_fapll: audio_fapll {
+ #clock-cells = <1>;
+ compatible = "ti,dm816-fapll-clock";
+ reg = <0x4a0 0x30>;
+ clocks = <&main_fapll 7>, < &sys_clkin_ck>;
+ clock-indices = <1>, <2>, <3>, <4>, <5>;
+ clock-output-names = "audio_pll_clk1",
+ "audio_pll_clk2",
+ "audio_pll_clk3",
+ "audio_pll_clk4",
+ "audio_pll_clk5";
+ };
+};
+
+&scrm_clocks {
+ secure_32k_ck: secure_32k_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ sys_32k_ck: sys_32k_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ tclkin_ck: tclkin_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ sys_clkin_ck: sys_clkin_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <27000000>;
+ };
+};
+
+/* 0x48180000 */
+&prcm_clocks {
+ clkout_pre_ck: clkout_pre_ck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
+ &audio_fapll 1>;
+ reg = <0x100>;
+ };
+
+ clkout_div_ck: clkout_div_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&clkout_pre_ck>;
+ ti,bit-shift = <3>;
+ ti,max-div = <8>;
+ reg = <0x100>;
+ };
+
+ clkout_ck: clkout_ck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&clkout_div_ck>;
+ ti,bit-shift = <7>;
+ reg = <0x100>;
+ };
+
+ /* CM_DPLL clocks p1795 */
+ sysclk1_ck: sysclk1_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 1>;
+ ti,max-div = <7>;
+ reg = <0x0300>;
+ };
+
+ sysclk2_ck: sysclk2_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 2>;
+ ti,max-div = <7>;
+ reg = <0x0304>;
+ };
+
+ sysclk3_ck: sysclk3_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 3>;
+ ti,max-div = <7>;
+ reg = <0x0308>;
+ };
+
+ sysclk4_ck: sysclk4_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 4>;
+ ti,max-div = <1>;
+ reg = <0x030c>;
+ };
+
+ sysclk5_ck: sysclk5_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&sysclk4_ck>;
+ ti,max-div = <1>;
+ reg = <0x0310>;
+ };
+
+ sysclk6_ck: sysclk6_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 4>;
+ ti,dividers = <2>, <4>;
+ reg = <0x0314>;
+ };
+
+ sysclk10_ck: sysclk10_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&ddr_fapll 2>;
+ ti,max-div = <7>;
+ reg = <0x0324>;
+ };
+
+ sysclk24_ck: sysclk24_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&main_fapll 5>;
+ ti,max-div = <7>;
+ reg = <0x03b4>;
+ };
+
+ mpu_ck: mpu_ck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&sysclk2_ck>;
+ ti,bit-shift = <1>;
+ reg = <0x15dc>;
+ };
+
+ audio_pll_a_ck: audio_pll_a_ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&audio_fapll 1>;
+ ti,max-div = <7>;
+ reg = <0x035c>;
+ };
+
+ sysclk18_ck: sysclk18_ck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
+ reg = <0x0378>;
+ };
+
+ timer1_fck: timer1_fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x0390>;
+ };
+
+ timer2_fck: timer2_fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x0394>;
+ };
+
+ timer3_fck: timer3_fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x0398>;
+ };
+
+ timer4_fck: timer4_fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x039c>;
+ };
+
+ timer5_fck: timer5_fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x03a0>;
+ };
+
+ timer6_fck: timer6_fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x03a4>;
+ };
+
+ timer7_fck: timer7_fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+ reg = <0x03a8>;
+ };
+};
--- /dev/null
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "ti,dm816";
+ interrupt-parent = <&intc>;
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a8-pmu";
+ interrupts = <3>;
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is used for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+ };
+
+ dm816x_pinmux: pinmux@44e10800 {
+ compatible = "pinctrl-single";
+ reg = <0x48140800 0x50a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xf>;
+ };
+
+ /*
+ * XXX: Use a flat representation of the dm816x interconnect.
+ * The real dm816x interconnect network is quite complex. Since
+ * it will not bring real advantage to represent that in DT
+ * for the moment, just use a fake OCP bus entry to represent
+ * the whole bus hierarchy.
+ */
+ ocp {
+ compatible = "ti,omap3-l3-smx", "simple-bus";
+ reg = <0x44000000 0x10000>;
+ interrupts = <9 10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ prcm: prcm@48180000 {
+ compatible = "ti,dm816-prcm";
+ reg = <0x48180000 0x4000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+
+ scrm: scrm@48140000 {
+ compatible = "ti,dm816-scrm";
+ reg = <0x48140000 0x21000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48140000 0x21000>;
+
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ scrm_clockdomains: clockdomains {
+ };
+ };
+
+ cm: syscon@44e10000 {
+ compatible = "ti,am33xx-controlmodule", "syscon";
+ reg = <0x44e10000 0x800>;
+ };
+
+ edma: edma@49000000 {
+ compatible = "ti,edma3";
+ ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
+ reg = <0x49000000 0x10000>,
+ <0x44e10f90 0x40>;
+ interrupts = <12 13 14>;
+ #dma-cells = <1>;
+ };
+
+ elm: elm@48080000 {
+ compatible = "ti,816-elm";
+ ti,hwmods = "elm";
+ reg = <0x48080000 0x2000>;
+ interrupts = <4>;
+ };
+
+ gpio1: gpio@48032000 {
+ compatible = "ti,omap3-gpio";
+ ti,hwmods = "gpio1";
+ reg = <0x48032000 0x1000>;
+ interrupts = <97>;
+ };
+
+ gpio2: gpio@4804c000 {
+ compatible = "ti,omap3-gpio";
+ ti,hwmods = "gpio2";
+ reg = <0x4804c000 0x1000>;
+ interrupts = <99>;
+ };
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ ti,hwmods = "gpmc";
+ reg = <0x50000000 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <100>;
+ gpmc,num-cs = <6>;
+ gpmc,num-waitpins = <2>;
+ };
+
+ i2c1: i2c@48028000 {
+ compatible = "ti,omap4-i2c";
+ ti,hwmods = "i2c1";
+ reg = <0x48028000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <70>;
+ dmas = <&edma 58 &edma 59>;
+ dma-names = "tx", "rx";
+ };
+
+ i2c2: i2c@4802a000 {
+ compatible = "ti,omap4-i2c";
+ ti,hwmods = "i2c2";
+ reg = <0x4802a000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <71>;
+ dmas = <&edma 60 &edma 61>;
+ dma-names = "tx", "rx";
+ };
+
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,dm816-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48200000 0x1000>;
+ };
+
+ mailbox: mailbox@480c8000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x480c8000 0x2000>;
+ interrupts = <77>;
+ ti,hwmods = "mailbox";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ mbox_dsp: mbox_dsp {
+ ti,mbox-tx = <3 0 0>;
+ ti,mbox-rx = <0 0 0>;
+ };
+ };
+
+ mdio: mdio@4a100800 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4a100800 0x100>;
+ ti,hwmods = "davinci_mdio";
+ bus_freq = <1000000>;
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <2>;
+ };
+ };
+
+ eth0: ethernet@4a100000 {
+ compatible = "ti,dm816-emac";
+ ti,hwmods = "emac0";
+ reg = <0x4a100000 0x800
+ 0x4a100900 0x3700>;
+ clocks = <&sysclk24_ck>;
+ ti,davinci-ctrl-reg-offset = <0>;
+ ti,davinci-ctrl-mod-reg-offset = <0x900>;
+ ti,davinci-ctrl-ram-offset = <0x2000>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ interrupts = <40 41 42 43>;
+ phy-handle = <&phy0>;
+ };
+
+ eth1: ethernet@4a120000 {
+ compatible = "ti,dm816-emac";
+ ti,hwmods = "emac1";
+ reg = <0x4a120000 0x4000>;
+ clocks = <&sysclk24_ck>;
+ ti,davinci-ctrl-reg-offset = <0>;
+ ti,davinci-ctrl-mod-reg-offset = <0x900>;
+ ti,davinci-ctrl-ram-offset = <0x2000>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ interrupts = <44 45 46 47>;
+ phy-handle = <&phy1>;
+ };
+
+ mcspi1: spi@48030000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x48030000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <65>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi1";
+ dmas = <&edma 16 &edma 17
+ &edma 18 &edma 19>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ mmc1: mmc@48060000 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x48060000 0x11000>;
+ ti,hwmods = "mmc1";
+ interrupts = <64>;
+ dmas = <&edma 24 &edma 25>;
+ dma-names = "tx", "rx";
+ };
+
+ timer1: timer@4802e000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x4802e000 0x2000>;
+ interrupts = <67>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
+
+ timer2: timer@48040000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48040000 0x2000>;
+ interrupts = <68>;
+ ti,hwmods = "timer2";
+ };
+
+ timer3: timer@48042000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48042000 0x2000>;
+ interrupts = <69>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@48044000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48044000 0x2000>;
+ interrupts = <92>;
+ ti,hwmods = "timer4";
+ };
+
+ timer5: timer@48046000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48046000 0x2000>;
+ interrupts = <93>;
+ ti,hwmods = "timer5";
+ };
+
+ timer6: timer@48048000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48048000 0x2000>;
+ interrupts = <94>;
+ ti,hwmods = "timer6";
+ };
+
+ timer7: timer@4804a000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x4804a000 0x2000>;
+ interrupts = <95>;
+ ti,hwmods = "timer7";
+ };
+
+ uart1: uart@48020000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart1";
+ reg = <0x48020000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <72>;
+ dmas = <&edma 26 &edma 27>;
+ dma-names = "tx", "rx";
+ };
+
+ uart2: uart@48022000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart2";
+ reg = <0x48022000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <73>;
+ dmas = <&edma 28 &edma 29>;
+ dma-names = "tx", "rx";
+ };
+
+ uart3: uart@48024000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart3";
+ reg = <0x48024000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <74>;
+ dmas = <&edma 30 &edma 31>;
+ dma-names = "tx", "rx";
+ };
+
+ /* NOTE: USB needs a transceiver driver for phys to work */
+ usb: usb_otg_hs@47401000 {
+ compatible = "ti,am33xx-usb";
+ reg = <0x47401000 0x400000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,hwmods = "usb_otg_hs";
+
+ usb0: usb@47401000 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47401400 0x400
+ 0x47401000 0x200>;
+ reg-names = "mc", "control";
+ interrupts = <18>;
+ interrupt-names = "mc";
+ dr_mode = "otg";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+ };
+
+ usb1: usb@47401800 {
+ compatible = "ti,musb-am33xx";
+ status = "disabled";
+ reg = <0x47401c00 0x400
+ 0x47401800 0x200>;
+ reg-names = "mc", "control";
+ interrupts = <19>;
+ interrupt-names = "mc";
+ dr_mode = "otg";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+ };
+ };
+
+ wd_timer2: wd_timer@480c2000 {
+ compatible = "ti,omap3-wdt";
+ ti,hwmods = "wd_timer";
+ reg = <0x480c2000 0x1000>;
+ interrupts = <0>;
+ };
+ };
+};
+
+#include "dm816x-clocks.dtsi"
"wkupclk", "refclk",
"div-clk", "phy-div";
#phy-cells = <0>;
- id = <1>;
ti,hwmods = "pcie1-phy";
};
"div-clk", "phy-div";
#phy-cells = <0>;
ti,hwmods = "pcie2-phy";
- id = <2>;
status = "disabled";
};
};
0x418 (MUX_MODE15) /* wakeup0.off */
>;
};
+
+ qspi1_pins: pinmux_qspi1_pins {
+ pinctrl-single,pins = <
+ 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
+ 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
+ 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
+ 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
+ 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
+ 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
+ 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
+ >;
+ };
};
&i2c1 {
pinctrl-0 = <&dcan1_pins_default>;
pinctrl-1 = <&dcan1_pins_sleep>;
};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi1_pins>;
+
+ spi-max-frequency = <48000000>;
+ m25p80@0 {
+ compatible = "s25fl256s1";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-cpol;
+ spi-cpha;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first four physical blocks
+ * for a valid file to boot and the flash here is
+ * 64KiB block size.
+ */
+ partition@0 {
+ label = "QSPI.SPL";
+ reg = <0x00000000 0x000010000>;
+ };
+ partition@1 {
+ label = "QSPI.SPL.backup1";
+ reg = <0x00010000 0x00010000>;
+ };
+ partition@2 {
+ label = "QSPI.SPL.backup2";
+ reg = <0x00020000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.SPL.backup3";
+ reg = <0x00030000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.u-boot";
+ reg = <0x00040000 0x00100000>;
+ };
+ partition@5 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00140000 0x00080000>;
+ };
+ partition@6 {
+ label = "QSPI.u-boot-env";
+ reg = <0x001c0000 0x00010000>;
+ };
+ partition@7 {
+ label = "QSPI.u-boot-env.backup1";
+ reg = <0x001d0000 0x0010000>;
+ };
+ partition@8 {
+ label = "QSPI.kernel";
+ reg = <0x001e0000 0x0800000>;
+ };
+ partition@9 {
+ label = "QSPI.file-system";
+ reg = <0x009e0000 0x01620000>;
+ };
+ };
+};
* Licensed under GPLv2.
*/
/dts-v1/;
-#include "at91sam9260.dtsi"
+#include "at91sam9xe.dtsi"
/ {
model = "Ethernut 5";
/dts-v1/;
#include "exynos3250.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Monk board";
compatible = "gpio-keys";
power_key {
- interrupt-parent = <&gpx2>;
- interrupts = <7 0>;
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
debounce-interval = <10>;
};
};
+&exynos_usbphy {
+ status = "okay";
+};
+
+&hsotg {
+ vusb_d-supply = <&ldo15_reg>;
+ vusb_a-supply = <&ldo12_reg>;
+ status = "okay";
+};
+
&i2c_0 {
#address-cells = <1>;
#size-cells = <0>;
/dts-v1/;
#include "exynos3250.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Rinato board";
compatible = "gpio-keys";
power_key {
- interrupt-parent = <&gpx2>;
- interrupts = <7 0>;
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
debounce-interval = <10>;
};
};
+&exynos_usbphy {
+ status = "okay";
+};
+
+&hsotg {
+ vusb_d-supply = <&ldo15_reg>;
+ vusb_a-supply = <&ldo12_reg>;
+ status = "okay";
+};
+
+&dsi_0 {
+ vddcore-supply = <&ldo6_reg>;
+ vddio-supply = <&ldo6_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ samsung,burst-clock-frequency = <250000000>;
+ samsung,esc-clock-frequency = <20000000>;
+ };
+ };
+ };
+
+ panel@0 {
+ compatible = "samsung,s6e63j0x03";
+ reg = <0>;
+ vdd3-supply = <&ldo16_reg>;
+ vci-supply = <&ldo20_reg>;
+ reset-gpios = <&gpe0 1 0>;
+ te-gpios = <&gpx0 6 0>;
+ power-on-delay= <30>;
+ power-off-delay= <120>;
+ reset-delay = <5>;
+ init-delay = <100>;
+ flip-horizontal;
+ flip-vertical;
+ panel-width-mm = <29>;
+ panel-height-mm = <29>;
+
+ display-timings {
+ timing-0 {
+ clock-frequency = <0>;
+ hactive = <320>;
+ vactive = <320>;
+ hfront-porch = <1>;
+ hback-porch = <1>;
+ hsync-len = <1>;
+ vfront-porch = <150>;
+ vback-porch = <1>;
+ vsync-len = <2>;
+ };
+ };
+
+ port {
+ dsi_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&fimd {
+ status = "okay";
+
+ i80-if-timings {
+ cs-setup = <0>;
+ wr-setup = <0>;
+ wr-act = <1>;
+ wr-hold = <0>;
+ };
+};
+
&i2c_0 {
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ hsotg: hsotg@12480000 {
+ compatible = "snps,dwc2";
+ reg = <0x12480000 0x20000>;
+ interrupts = <0 141 0>;
+ clocks = <&cmu CLK_USBOTG>;
+ clock-names = "otg";
+ phys = <&exynos_usbphy 0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
mshc_0: mshc@12510000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12510000 0x1000>;
status = "disabled";
};
+ exynos_usbphy: exynos-usbphy@125B0000 {
+ compatible = "samsung,exynos3250-usb2-phy";
+ reg = <0x125B0000 0x100>;
+ samsung,pmureg-phandle = <&pmu_system_controller>;
+ clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
+ clock-names = "phy", "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
gpio-keys {
compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq &lid_irq>;
power {
label = "Power";
};
&pinctrl_0 {
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
ec_irq: ec-irq {
samsung,pins = "gpx1-6";
samsung,pin-function = <0>;
samsung,pin-drv = <0>;
};
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <0>;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5420.dtsi"
/ {
compatible = "gpio-keys";
pinctrl-names = "default";
- pinctrl-0 = <&power_key_irq>;
+ pinctrl-0 = <&power_key_irq &lid_irq>;
power {
label = "Power";
linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
};
memory {
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: BUCK2 {
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck3_reg: BUCK3 {
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: BUCK4 {
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: BUCK5 {
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck6_reg: BUCK6 {
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck7_reg: BUCK7 {
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
buck8_reg: BUCK8 {
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck9_reg: BUCK9 {
regulator-max-microvolt = <2000000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
buck10_reg: BUCK10 {
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo1_reg: LDO1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo2_reg: LDO2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
vqmmc_sdcard: ldo4_reg: LDO4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo5_reg: LDO5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo6_reg: LDO6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo7_reg: LDO7 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo9_reg: LDO9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo10_reg: LDO10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo11_reg: LDO11 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo12_reg: LDO12 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo13_reg: LDO13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo14_reg: LDO14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo15_reg: LDO15 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo17_reg: LDO17 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo18_reg: LDO18 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo32_reg: LDO32 {
samsung,pin-drv = <0>;
};
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-4";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <0>;
};
tps65090_fet5: fet5 {
regulator-name = "camout";
+ regulator-always-on;
};
tps65090_fet6: fet6 {
regulator-name = "lcd_vdd";
--- /dev/null
+/*
+ * Hardkernel Odroid XU3 board device tree source
+ *
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5800.dtsi"
+
+/ {
+ model = "Hardkernel Odroid XU3";
+ compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ linux,stdout-path = &serial_2;
+ };
+
+ fimd@14400000 {
+ status = "okay";
+ };
+
+ firmware@02073000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x02073000 0x1000>;
+ };
+
+ fixed-rate-clocks {
+ oscclk {
+ compatible = "samsung,exynos5420-oscclk";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ hsi2c_4: i2c@12CA0000 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vdd_ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vdd_ldo13";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd_ldo15";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "vdd_ldo16";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "tsp_avdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "tsp_io";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_mem";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_1.0v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_1.8v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_2.8v_ldo";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_vmem";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+
+ i2c_2: i2c@12C80000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ status = "okay";
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+ };
+
+ rtc@101E0000 {
+ status = "okay";
+ };
+};
+
+&hdmi {
+ status = "okay";
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+
+ vdd_osc-supply = <&ldo7_reg>;
+ vdd_pll-supply = <&ldo6_reg>;
+ vdd-supply = <&ldo6_reg>;
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "otg";
+};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5800.dtsi"
/ {
compatible = "gpio-keys";
pinctrl-names = "default";
- pinctrl-0 = <&power_key_irq>;
+ pinctrl-0 = <&power_key_irq &lid_irq>;
power {
label = "Power";
linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+
};
memory {
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: BUCK2 {
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck3_reg: BUCK3 {
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: BUCK4 {
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: BUCK5 {
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck6_reg: BUCK6 {
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck7_reg: BUCK7 {
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
buck8_reg: BUCK8 {
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck9_reg: BUCK9 {
regulator-max-microvolt = <2000000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
buck10_reg: BUCK10 {
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo1_reg: LDO1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo2_reg: LDO2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
vqmmc_sdcard: ldo4_reg: LDO4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo5_reg: LDO5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo6_reg: LDO6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo7_reg: LDO7 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo9_reg: LDO9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo10_reg: LDO10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo11_reg: LDO11 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo12_reg: LDO12 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo13_reg: LDO13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
ldo14_reg: LDO14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo15_reg: LDO15 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo17_reg: LDO17 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo18_reg: LDO18 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo32_reg: LDO32 {
samsung,pin-drv = <0>;
};
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-4";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <0>;
};
tps65090_fet5: fet5 {
regulator-name = "camout";
+ regulator-always-on;
};
tps65090_fet6: fet6 {
regulator-name = "lcd_vdd";
--- /dev/null
+/*
+ * Hisilicon Ltd. HiP01 SoC
+ *
+ * Copyright (C) 2014 Hisilicon Ltd.
+ * Copyright (C) 2014 Huawei Ltd.
+ *
+ * Author: Wang Long <long.wanglong@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/* First 8KB reserved for secondary core boot */
+/memreserve/ 0x80000000 0x00002000;
+
+#include "hip01.dtsi"
+
+/ {
+ model = "Hisilicon HIP01 Development Board";
+ compatible = "hisilicon,hip01-ca9x2", "hisilicon,hip01";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "hisilicon,hip01-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Hisilicon Ltd. HiP01 SoC
+ *
+ * Copyright (c) 2014 Hisilicon Ltd.
+ * Copyright (c) 2014 Huawei Ltd.
+ *
+ * Author: Wang Long <long.wanglong@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gic: interrupt-controller@1e001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1a001000 0x1000>, <0x1a000100 0x1000>;
+ };
+
+ hisi_refclk144mhz: refclk144mkhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <144000000>;
+ clock-output-names = "hisi:refclk144khz";
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges = <0 0x10000000 0x20000000>;
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ ranges;
+
+ uart0: uart@10001000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10001000 0x1000>;
+ clocks = <&hisi_refclk144mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ interrupts = <0 32 4>;
+ status = "disabled";
+ };
+
+ uart1: uart@10002000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10002000 0x1000>;
+ clocks = <&hisi_refclk144mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ interrupts = <0 33 4>;
+ status = "disabled";
+ };
+
+ uart2: uart@10003000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10003000 0x1000>;
+ clocks = <&hisi_refclk144mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ interrupts = <0 34 4>;
+ status = "disabled";
+ };
+
+ uart3: uart@10006000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10006000 0x1000>;
+ clocks = <&hisi_refclk144mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ interrupts = <0 4 4>;
+ status = "disabled";
+ };
+ };
+
+ system-controller@10000000 {
+ compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+ reg = <0x10000000 0x1000>;
+ reboot-offset = <0x4>;
+ };
+
+ global_timer@0a000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x0a000200 0x100>;
+ interrupts = <1 11 0xf04>;
+ clocks = <&hisi_refclk144mhz>;
+ };
+
+ local_timer@0a000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x0a000600 0x100>;
+ interrupts = <1 13 0xf04>;
+ clocks = <&hisi_refclk144mhz>;
+ };
+ };
+};
linux,default-trigger = "heartbeat";
};
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_max5821: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "max5821-reg";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+ };
};
&cspi1 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
+
+ max5821@38 {
+ compatible = "maxim,max5821";
+ reg = <0x38>;
+ vref-supply = <®_max5821>;
+ };
};
&i2c2 {
};
coda: coda@10023000 {
- compatible = "fsl,imx27-vpu";
+ compatible = "fsl,imx27-vpu", "cnm,codadx6";
reg = <0x10023000 0x0200>;
interrupts = <53>;
clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
};
lradc@80050000 {
- fsl,lradc-touchscreen-wires = <4>;
status = "okay";
fsl,lradc-touchscreen-wires = <4>;
fsl,ave-ctrl = <4>;
model = "Armadeus Systems APF51Dev docking/development board";
compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
+ backlight@bl1{
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ compatible = "gpio-backlight";
+ gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
+
display@di1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-0 = <&pinctrl_hog>;
imx51-apf51dev {
+ pinctrl_backlight: bl1grp {
+ fsl,pins = <
+ MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
+ >;
+ };
+
pinctrl_hog: hoggrp {
fsl,pins = <
MX51_PAD_EIM_EB2__GPIO2_22 0x0C5
};
vpu: vpu@63ff4000 {
- compatible = "fsl,imx53-vpu";
+ compatible = "fsl,imx53-vpu", "cnm,coda7541";
reg = <0x63ff4000 0x1000>;
interrupts = <9>;
clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
resets = <&src 1>;
iram = <&ocram>;
};
+
+ sahara: crypto@63ff8000 {
+ compatible = "fsl,imx53-sahara";
+ reg = <0x63ff8000 0x4000>;
+ interrupts = <19 20>;
+ clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+ <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+ clock-names = "ipg", "ahb";
+ };
};
ocram: sram@f8000000 {
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-udoo.dtsi"
+
+/ {
+ model = "Udoo i.MX6 Dual-lite Board";
+ compatible = "udoo,imx6dl-udoo", "fsl,imx6dl";
+};
next-level-cache = <&L2>;
operating-points = <
/* kHz uV */
- 996000 1275000
+ 996000 1250000
792000 1175000
396000 1075000
>;
* published by the Free Software Foundation.
*
*/
-
/dts-v1/;
#include "imx6q.dtsi"
+#include "imx6qdl-udoo.dtsi"
/ {
model = "Udoo i.MX6 Quad Board";
compatible = "udoo,imx6q-udoo", "fsl,imx6q";
-
- chosen {
- stdout-path = &uart2;
- };
-
- memory {
- reg = <0x10000000 0x40000000>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb_h1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
- gpio = <&gpio7 12 0>;
- };
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c2>;
- status = "okay";
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-};
-
-&iomuxc {
- imx6q-udoo {
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
- >;
- };
-
- pinctrl_usbh: usbhgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
- MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- >;
- };
- };
};
&sata {
status = "okay";
};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&usbh1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh>;
- vbus-supply = <®_usb_h1_vbus>;
- clocks = <&clks 201>;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- non-removable;
- status = "okay";
-};
1200000 1275000
996000 1250000
852000 1250000
- 792000 1150000
+ 792000 1175000
396000 975000
>;
fsl,soc-operating-points = <
clocks = <&clks IMX6Q_CLK_ECSPI5>,
<&clks IMX6Q_CLK_ECSPI5>;
clock-names = "ipg", "per";
+ dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
};
status = "okay";
};
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
};
};
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
>;
};
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_h1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
+ gpio = <&gpio7 12 0>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6q-udoo {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh: usbhgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+ MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh>;
+ vbus-supply = <®_usb_h1_vbus>;
+ clocks = <&clks 201>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ non-removable;
+ status = "okay";
+};
<0 12 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bit", "jpeg";
clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
- <&clks IMX6QDL_CLK_MMDC_CH0_AXI>,
- <&clks IMX6QDL_CLK_OCRAM>;
- clock-names = "per", "ahb", "ocram";
+ <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
+ clock-names = "per", "ahb";
resets = <&src 1>;
iram = <&ocram>;
};
--- /dev/null
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Freescale i.MX6 SoloX Sabre Auto Board";
+ compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
+
+ memory {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vcc_sd3: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_sd3>;
+ regulator-name = "VCC_SD3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <&vcc_sd3>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ enable-sdio-wakup;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6x-sabreauto {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
+ MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
+ MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
+ MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
+ MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_vcc_sd3: vccsd3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
+ >;
+ };
+ };
+};
status = "okay";
};
+&qspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi2>;
+ status = "okay";
+
+ flash0: s25fl128s@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl128s";
+ spi-max-frequency = <66000000>;
+ };
+
+ flash1: s25fl128s@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl128s";
+ spi-max-frequency = <66000000>;
+ };
+};
+
&ssi2 {
status = "okay";
};
>;
};
+ pinctrl_qspi2: qspi2grp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1
+ MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1
+ MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1
+ MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1
+ MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1
+ MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1
+ MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1
+ MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1
+ MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1
+ MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1
+ MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1
+ MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1
+ >;
+ };
+
pinctrl_vcc_sd3: vccsd3grp {
fsl,pins = <
MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
interrupts = <21>;
clocks = <&gate_clk 14>, <&gate_clk 15>;
clock-names = "0", "1";
+ phys = <&sata_phy0>, <&sata_phy1>;
+ phy-names = "port0", "port1";
status = "disabled";
};
--- /dev/null
+/*
+ * Device Tree file for Seagate Blackarmor NAS220
+ *
+ * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+ model = "Seagate Blackarmor NAS220";
+ compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
+ "marvell,kirkwood";
+
+ memory { /* 128 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button@1{
+ label = "Reset";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ button@2{
+ label = "Power";
+ linux,code = <KEY_SLEEP>;
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ blue-power {
+ label = "nas220:blue:power";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
+ pinctrl-names = "default";
+
+ sata0_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA0 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+
+ sata1_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+/*
+ * Serial port routed to connector CN5
+ *
+ * pin 1 - TX (CPU's TX)
+ * pin 4 - RX (CPU's RX)
+ * pin 6 - GND
+ */
+&uart0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_button_reset &pmx_button_power>;
+ pinctrl-names = "default";
+
+ pmx_act_sata0: pmx-act-sata0 {
+ marvell,pins = "mpp15";
+ marvell,function = "sata0";
+ };
+
+ pmx_act_sata1: pmx-act-sata1 {
+ marvell,pins = "mpp16";
+ marvell,function = "sata1";
+ };
+
+ pmx_power_sata0: pmx-power-sata0 {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_sata1: pmx-power-sata1 {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_button_reset: pmx-button-reset {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_button_power: pmx-button-power {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+};
+
+&sata {
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ adt7476: thermal@2e {
+ compatible = "adi,adt7476";
+ reg = <0x2e>;
+ };
+};
+
+&nand {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@8 {
+ reg = <8>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
};
};
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
};
&nand {
};
partition@400000 {
- label = "uInitrd";
- reg = <0x540000 0x1000000>;
+ label = "rootfs";
+ reg = <0x400000 0x1C00000>;
};
};
--- /dev/null
+/*
+ * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
+ *
+ * Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org>
+ *
+ * based on information of dts files from
+ * Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com>
+ * OpenWrt by Felix Kaechele <heffer@fedoraproject.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "Cloud Engines Pogoplug E02";
+ compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ health {
+ label = "pogo_e02:green:health";
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ fault {
+ label = "pogo_e02:orange:fault";
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_power_enable>;
+ pinctrl-names = "default";
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
+ &pmx_led_green >;
+ pinctrl-names = "default";
+
+ pmx_usb_power_enable: pmx-usb-power-enable {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_green: pmx-led-green {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_orange: pmx-led-orange {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&nand {
+ chip-delay = <40>;
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "uImage";
+ reg = <0x0100000 0x400000>;
+ };
+
+ partition@500000 {
+ label = "pogoplug";
+ reg = <0x0500000 0x2000000>;
+ };
+
+ partition@2500000 {
+ label = "root";
+ reg = <0x02500000 0x5b00000>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
+++ /dev/null
-/*
- * DTS file for CSR SiRFmarco Evaluation Board
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-/include/ "marco.dtsi"
-
-/ {
- model = "CSR SiRFmarco Evaluation Board";
- compatible = "sirf,marco-cb", "sirf,marco";
-
- memory {
- reg = <0x40000000 0x60000000>;
- };
-
- axi {
- peri-iobg {
- uart1: uart@cc060000 {
- status = "okay";
- };
- uart2: uart@cc070000 {
- status = "okay";
- };
- i2c0: i2c@cc0e0000 {
- status = "okay";
- fpga-cpld@4d {
- compatible = "sirf,fpga-cpld";
- reg = <0x4d>;
- };
- };
- spi1: spi@cc170000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins_a>;
- spi@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <1000000>;
- };
- };
- pci-iobg {
- sd0: sdhci@cd000000 {
- bus-width = <8>;
- status = "okay";
- };
- };
- };
- };
-};
+++ /dev/null
-/*
- * DTS file for CSR SiRFmarco SoC
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-/ {
- compatible = "sirf,marco";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- };
- };
-
- axi {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x40000000 0x40000000 0xa0000000>;
-
- l2-cache-controller@c0030000 {
- compatible = "arm,pl310-cache";
- reg = <0xc0030000 0x1000>;
- interrupts = <0 59 0>;
- arm,tag-latency = <1 1 1>;
- arm,data-latency = <1 1 1>;
- arm,filter-ranges = <0x40000000 0x80000000>;
- };
-
- gic: interrupt-controller@c0011000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0xc0011000 0x1000>,
- <0xc0010100 0x0100>;
- };
-
- rstc-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xc2000000 0xc2000000 0x1000000>;
-
- rstc: reset-controller@c2000000 {
- compatible = "sirf,marco-rstc";
- reg = <0xc2000000 0x10000>;
- #reset-cells = <1>;
- };
- };
-
- sys-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xc3000000 0xc3000000 0x1000000>;
-
- clock-controller@c3000000 {
- compatible = "sirf,marco-clkc";
- reg = <0xc3000000 0x1000>;
- interrupts = <0 3 0>;
- };
-
- rsc-controller@c3010000 {
- compatible = "sirf,marco-rsc";
- reg = <0xc3010000 0x1000>;
- };
- };
-
- mem-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xc4000000 0xc4000000 0x1000000>;
-
- memory-controller@c4000000 {
- compatible = "sirf,marco-memc";
- reg = <0xc4000000 0x10000>;
- interrupts = <0 27 0>;
- };
- };
-
- disp-iobg0 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xc5000000 0xc5000000 0x1000000>;
-
- display0@c5000000 {
- compatible = "sirf,marco-lcd";
- reg = <0xc5000000 0x10000>;
- interrupts = <0 30 0>;
- };
-
- vpp0@c5010000 {
- compatible = "sirf,marco-vpp";
- reg = <0xc5010000 0x10000>;
- interrupts = <0 31 0>;
- };
- };
-
- disp-iobg1 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xc6000000 0xc6000000 0x1000000>;
-
- display1@c6000000 {
- compatible = "sirf,marco-lcd";
- reg = <0xc6000000 0x10000>;
- interrupts = <0 62 0>;
- };
-
- vpp1@c6010000 {
- compatible = "sirf,marco-vpp";
- reg = <0xc6010000 0x10000>;
- interrupts = <0 63 0>;
- };
- };
-
- graphics-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xc8000000 0xc8000000 0x1000000>;
-
- graphics@c8000000 {
- compatible = "powervr,sgx540";
- reg = <0xc8000000 0x1000000>;
- interrupts = <0 6 0>;
- };
- };
-
- multimedia-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xc9000000 0xc9000000 0x1000000>;
-
- multimedia@a0000000 {
- compatible = "sirf,marco-video-codec";
- reg = <0xc9000000 0x1000000>;
- interrupts = <0 5 0>;
- };
- };
-
- dsp-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xca000000 0xca000000 0x2000000>;
-
- dspif@ca000000 {
- compatible = "sirf,marco-dspif";
- reg = <0xca000000 0x10000>;
- interrupts = <0 9 0>;
- };
-
- gps@ca010000 {
- compatible = "sirf,marco-gps";
- reg = <0xca010000 0x10000>;
- interrupts = <0 7 0>;
- };
-
- dsp@cb000000 {
- compatible = "sirf,marco-dsp";
- reg = <0xcb000000 0x1000000>;
- interrupts = <0 8 0>;
- };
- };
-
- peri-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xcc000000 0xcc000000 0x2000000>;
-
- timer@cc020000 {
- compatible = "sirf,marco-tick";
- reg = <0xcc020000 0x1000>;
- interrupts = <0 0 0>,
- <0 1 0>,
- <0 2 0>,
- <0 49 0>,
- <0 50 0>,
- <0 51 0>;
- };
-
- nand@cc030000 {
- compatible = "sirf,marco-nand";
- reg = <0xcc030000 0x10000>;
- interrupts = <0 41 0>;
- };
-
- audio@cc040000 {
- compatible = "sirf,marco-audio";
- reg = <0xcc040000 0x10000>;
- interrupts = <0 35 0>;
- };
-
- uart0: uart@cc050000 {
- cell-index = <0>;
- compatible = "sirf,marco-uart";
- reg = <0xcc050000 0x1000>;
- interrupts = <0 17 0>;
- fifosize = <128>;
- status = "disabled";
- };
-
- uart1: uart@cc060000 {
- cell-index = <1>;
- compatible = "sirf,marco-uart";
- reg = <0xcc060000 0x1000>;
- interrupts = <0 18 0>;
- fifosize = <32>;
- status = "disabled";
- };
-
- uart2: uart@cc070000 {
- cell-index = <2>;
- compatible = "sirf,marco-uart";
- reg = <0xcc070000 0x1000>;
- interrupts = <0 19 0>;
- fifosize = <128>;
- status = "disabled";
- };
-
- uart3: uart@cc190000 {
- cell-index = <3>;
- compatible = "sirf,marco-uart";
- reg = <0xcc190000 0x1000>;
- interrupts = <0 66 0>;
- fifosize = <128>;
- status = "disabled";
- };
-
- uart4: uart@cc1a0000 {
- cell-index = <4>;
- compatible = "sirf,marco-uart";
- reg = <0xcc1a0000 0x1000>;
- interrupts = <0 69 0>;
- fifosize = <128>;
- status = "disabled";
- };
-
- usp0: usp@cc080000 {
- cell-index = <0>;
- compatible = "sirf,marco-usp";
- reg = <0xcc080000 0x10000>;
- interrupts = <0 20 0>;
- status = "disabled";
- };
-
- usp1: usp@cc090000 {
- cell-index = <1>;
- compatible = "sirf,marco-usp";
- reg = <0xcc090000 0x10000>;
- interrupts = <0 21 0>;
- status = "disabled";
- };
-
- usp2: usp@cc0a0000 {
- cell-index = <2>;
- compatible = "sirf,marco-usp";
- reg = <0xcc0a0000 0x10000>;
- interrupts = <0 22 0>;
- status = "disabled";
- };
-
- dmac0: dma-controller@cc0b0000 {
- cell-index = <0>;
- compatible = "sirf,marco-dmac";
- reg = <0xcc0b0000 0x10000>;
- interrupts = <0 12 0>;
- };
-
- dmac1: dma-controller@cc160000 {
- cell-index = <1>;
- compatible = "sirf,marco-dmac";
- reg = <0xcc160000 0x10000>;
- interrupts = <0 13 0>;
- };
-
- vip@cc0c0000 {
- compatible = "sirf,marco-vip";
- reg = <0xcc0c0000 0x10000>;
- };
-
- spi0: spi@cc0d0000 {
- cell-index = <0>;
- compatible = "sirf,marco-spi";
- reg = <0xcc0d0000 0x10000>;
- interrupts = <0 15 0>;
- sirf,spi-num-chipselects = <1>;
- cs-gpios = <&gpio 0 0>;
- sirf,spi-dma-rx-channel = <25>;
- sirf,spi-dma-tx-channel = <20>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi1: spi@cc170000 {
- cell-index = <1>;
- compatible = "sirf,marco-spi";
- reg = <0xcc170000 0x10000>;
- interrupts = <0 16 0>;
- sirf,spi-num-chipselects = <1>;
- cs-gpios = <&gpio 0 0>;
- sirf,spi-dma-rx-channel = <12>;
- sirf,spi-dma-tx-channel = <13>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c0: i2c@cc0e0000 {
- cell-index = <0>;
- compatible = "sirf,marco-i2c";
- reg = <0xcc0e0000 0x10000>;
- interrupts = <0 24 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c1: i2c@cc0f0000 {
- cell-index = <1>;
- compatible = "sirf,marco-i2c";
- reg = <0xcc0f0000 0x10000>;
- interrupts = <0 25 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- tsc@cc110000 {
- compatible = "sirf,marco-tsc";
- reg = <0xcc110000 0x10000>;
- interrupts = <0 33 0>;
- };
-
- gpio: pinctrl@cc120000 {
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- compatible = "sirf,marco-pinctrl";
- reg = <0xcc120000 0x10000>;
- interrupts = <0 43 0>,
- <0 44 0>,
- <0 45 0>,
- <0 46 0>,
- <0 47 0>;
- gpio-controller;
- interrupt-controller;
-
- lcd_16pins_a: lcd0_0 {
- lcd {
- sirf,pins = "lcd_16bitsgrp";
- sirf,function = "lcd_16bits";
- };
- };
- lcd_18pins_a: lcd0_1 {
- lcd {
- sirf,pins = "lcd_18bitsgrp";
- sirf,function = "lcd_18bits";
- };
- };
- lcd_24pins_a: lcd0_2 {
- lcd {
- sirf,pins = "lcd_24bitsgrp";
- sirf,function = "lcd_24bits";
- };
- };
- lcdrom_pins_a: lcdrom0_0 {
- lcd {
- sirf,pins = "lcdromgrp";
- sirf,function = "lcdrom";
- };
- };
- uart0_pins_a: uart0_0 {
- uart {
- sirf,pins = "uart0grp";
- sirf,function = "uart0";
- };
- };
- uart1_pins_a: uart1_0 {
- uart {
- sirf,pins = "uart1grp";
- sirf,function = "uart1";
- };
- };
- uart2_pins_a: uart2_0 {
- uart {
- sirf,pins = "uart2grp";
- sirf,function = "uart2";
- };
- };
- uart2_noflow_pins_a: uart2_1 {
- uart {
- sirf,pins = "uart2_nostreamctrlgrp";
- sirf,function = "uart2_nostreamctrl";
- };
- };
- spi0_pins_a: spi0_0 {
- spi {
- sirf,pins = "spi0grp";
- sirf,function = "spi0";
- };
- };
- spi1_pins_a: spi1_0 {
- spi {
- sirf,pins = "spi1grp";
- sirf,function = "spi1";
- };
- };
- i2c0_pins_a: i2c0_0 {
- i2c {
- sirf,pins = "i2c0grp";
- sirf,function = "i2c0";
- };
- };
- i2c1_pins_a: i2c1_0 {
- i2c {
- sirf,pins = "i2c1grp";
- sirf,function = "i2c1";
- };
- };
- pwm0_pins_a: pwm0_0 {
- pwm {
- sirf,pins = "pwm0grp";
- sirf,function = "pwm0";
- };
- };
- pwm1_pins_a: pwm1_0 {
- pwm {
- sirf,pins = "pwm1grp";
- sirf,function = "pwm1";
- };
- };
- pwm2_pins_a: pwm2_0 {
- pwm {
- sirf,pins = "pwm2grp";
- sirf,function = "pwm2";
- };
- };
- pwm3_pins_a: pwm3_0 {
- pwm {
- sirf,pins = "pwm3grp";
- sirf,function = "pwm3";
- };
- };
- gps_pins_a: gps_0 {
- gps {
- sirf,pins = "gpsgrp";
- sirf,function = "gps";
- };
- };
- vip_pins_a: vip_0 {
- vip {
- sirf,pins = "vipgrp";
- sirf,function = "vip";
- };
- };
- sdmmc0_pins_a: sdmmc0_0 {
- sdmmc0 {
- sirf,pins = "sdmmc0grp";
- sirf,function = "sdmmc0";
- };
- };
- sdmmc1_pins_a: sdmmc1_0 {
- sdmmc1 {
- sirf,pins = "sdmmc1grp";
- sirf,function = "sdmmc1";
- };
- };
- sdmmc2_pins_a: sdmmc2_0 {
- sdmmc2 {
- sirf,pins = "sdmmc2grp";
- sirf,function = "sdmmc2";
- };
- };
- sdmmc3_pins_a: sdmmc3_0 {
- sdmmc3 {
- sirf,pins = "sdmmc3grp";
- sirf,function = "sdmmc3";
- };
- };
- sdmmc4_pins_a: sdmmc4_0 {
- sdmmc4 {
- sirf,pins = "sdmmc4grp";
- sirf,function = "sdmmc4";
- };
- };
- sdmmc5_pins_a: sdmmc5_0 {
- sdmmc5 {
- sirf,pins = "sdmmc5grp";
- sirf,function = "sdmmc5";
- };
- };
- i2s_pins_a: i2s_0 {
- i2s {
- sirf,pins = "i2sgrp";
- sirf,function = "i2s";
- };
- };
- ac97_pins_a: ac97_0 {
- ac97 {
- sirf,pins = "ac97grp";
- sirf,function = "ac97";
- };
- };
- nand_pins_a: nand_0 {
- nand {
- sirf,pins = "nandgrp";
- sirf,function = "nand";
- };
- };
- usp0_pins_a: usp0_0 {
- usp0 {
- sirf,pins = "usp0grp";
- sirf,function = "usp0";
- };
- };
- usp1_pins_a: usp1_0 {
- usp1 {
- sirf,pins = "usp1grp";
- sirf,function = "usp1";
- };
- };
- usp2_pins_a: usp2_0 {
- usp2 {
- sirf,pins = "usp2grp";
- sirf,function = "usp2";
- };
- };
- usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus_0 {
- usb0_utmi_drvbus {
- sirf,pins = "usb0_utmi_drvbusgrp";
- sirf,function = "usb0_utmi_drvbus";
- };
- };
- usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus_0 {
- usb1_utmi_drvbus {
- sirf,pins = "usb1_utmi_drvbusgrp";
- sirf,function = "usb1_utmi_drvbus";
- };
- };
- warm_rst_pins_a: warm_rst_0 {
- warm_rst {
- sirf,pins = "warm_rstgrp";
- sirf,function = "warm_rst";
- };
- };
- pulse_count_pins_a: pulse_count_0 {
- pulse_count {
- sirf,pins = "pulse_countgrp";
- sirf,function = "pulse_count";
- };
- };
- cko0_rst_pins_a: cko0_rst_0 {
- cko0_rst {
- sirf,pins = "cko0_rstgrp";
- sirf,function = "cko0_rst";
- };
- };
- cko1_rst_pins_a: cko1_rst_0 {
- cko1_rst {
- sirf,pins = "cko1_rstgrp";
- sirf,function = "cko1_rst";
- };
- };
- };
-
- pwm@cc130000 {
- compatible = "sirf,marco-pwm";
- reg = <0xcc130000 0x10000>;
- };
-
- efusesys@cc140000 {
- compatible = "sirf,marco-efuse";
- reg = <0xcc140000 0x10000>;
- };
-
- pulsec@cc150000 {
- compatible = "sirf,marco-pulsec";
- reg = <0xcc150000 0x10000>;
- interrupts = <0 48 0>;
- };
-
- pci-iobg {
- compatible = "sirf,marco-pciiobg", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xcd000000 0xcd000000 0x1000000>;
-
- sd0: sdhci@cd000000 {
- cell-index = <0>;
- compatible = "sirf,marco-sdhc";
- reg = <0xcd000000 0x100000>;
- interrupts = <0 38 0>;
- status = "disabled";
- };
-
- sd1: sdhci@cd100000 {
- cell-index = <1>;
- compatible = "sirf,marco-sdhc";
- reg = <0xcd100000 0x100000>;
- interrupts = <0 38 0>;
- status = "disabled";
- };
-
- sd2: sdhci@cd200000 {
- cell-index = <2>;
- compatible = "sirf,marco-sdhc";
- reg = <0xcd200000 0x100000>;
- interrupts = <0 23 0>;
- status = "disabled";
- };
-
- sd3: sdhci@cd300000 {
- cell-index = <3>;
- compatible = "sirf,marco-sdhc";
- reg = <0xcd300000 0x100000>;
- interrupts = <0 23 0>;
- status = "disabled";
- };
-
- sd4: sdhci@cd400000 {
- cell-index = <4>;
- compatible = "sirf,marco-sdhc";
- reg = <0xcd400000 0x100000>;
- interrupts = <0 39 0>;
- status = "disabled";
- };
-
- sd5: sdhci@cd500000 {
- cell-index = <5>;
- compatible = "sirf,marco-sdhc";
- reg = <0xcd500000 0x100000>;
- interrupts = <0 39 0>;
- status = "disabled";
- };
-
- pci-copy@cd900000 {
- compatible = "sirf,marco-pcicp";
- reg = <0xcd900000 0x100000>;
- interrupts = <0 40 0>;
- };
-
- rom-interface@cda00000 {
- compatible = "sirf,marco-romif";
- reg = <0xcda00000 0x100000>;
- };
- };
- };
-
- rtc-iobg {
- compatible = "sirf,marco-rtciobg", "sirf-marco-rtciobg-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xc1000000 0x10000>;
-
- gpsrtc@1000 {
- compatible = "sirf,marco-gpsrtc";
- reg = <0x1000 0x1000>;
- interrupts = <0 55 0>,
- <0 56 0>,
- <0 57 0>;
- };
-
- sysrtc@2000 {
- compatible = "sirf,marco-sysrtc";
- reg = <0x2000 0x1000>;
- interrupts = <0 52 0>,
- <0 53 0>,
- <0 54 0>;
- };
-
- pwrc@3000 {
- compatible = "sirf,marco-pwrc";
- reg = <0x3000 0x1000>;
- interrupts = <0 32 0>;
- };
- };
-
- uus-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xce000000 0xce000000 0x1000000>;
-
- usb0: usb@ce000000 {
- compatible = "chipidea,ci13611a-marco";
- reg = <0xce000000 0x10000>;
- interrupts = <0 10 0>;
- };
-
- usb1: usb@ce010000 {
- compatible = "chipidea,ci13611a-marco";
- reg = <0xce010000 0x10000>;
- interrupts = <0 11 0>;
- };
-
- security@ce020000 {
- compatible = "sirf,marco-security";
- reg = <0xce020000 0x10000>;
- interrupts = <0 42 0>;
- };
- };
-
- can-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xd0000000 0xd0000000 0x1000000>;
-
- can0: can@d0000000 {
- compatible = "sirf,marco-can";
- reg = <0xd0000000 0x10000>;
- };
-
- can1: can@d0010000 {
- compatible = "sirf,marco-can";
- reg = <0xd0010000 0x10000>;
- };
- };
-
- lvds-iobg {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0xd1000000 0xd1000000 0x1000000>;
-
- lvds@d1000000 {
- compatible = "sirf,marco-lvds";
- reg = <0xd1000000 0x10000>;
- interrupts = <0 64 0>;
- };
- };
- };
-};
compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
chosen {
- bootargs = "earlyprintk";
+ bootargs = "console=ttyS0,921600n8 earlyprintk";
+ stdout-path = &uart0;
};
memory {
reg = <0x80000000 0x40000000>;
};
+
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
};
/ {
compatible = "mediatek,mt6589";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&sysirq>;
cpus {
#address-cells = <1>;
clock-frequency = <32000>;
#clock-cells = <0>;
};
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
};
soc {
timer: timer@10008000 {
compatible = "mediatek,mt6577-timer";
reg = <0x10008000 0x80>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>, <&rtc_clk>;
clock-names = "system-clk", "rtc-clk";
};
+ sysirq: interrupt-controller@10200100 {
+ compatible = "mediatek,mt6589-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0x10200100 0x1c>;
+ };
+
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
#interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
reg = <0x10211000 0x1000>,
<0x10212000 0x1000>,
<0x10214000 0x2000>,
<0x10216000 0x2000>;
};
+
+ uart0: serial@11006000 {
+ compatible = "mediatek,mt6577-uart";
+ reg = <0x11006000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11007000 {
+ compatible = "mediatek,mt6577-uart";
+ reg = <0x11007000 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@11008000 {
+ compatible = "mediatek,mt6577-uart";
+ reg = <0x11008000 0x400>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart3: serial@11009000 {
+ compatible = "mediatek,mt6577-uart";
+ reg = <0x11009000 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
};
};
/ {
compatible = "mediatek,mt6592";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&sysirq>;
cpus {
#address-cells = <1>;
#clock-cells = <0>;
};
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
timer: timer@10008000 {
compatible = "mediatek,mt6577-timer";
reg = <0x10008000 0x80>;
- interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>, <&rtc_clk>;
clock-names = "system-clk", "rtc-clk";
};
+ sysirq: interrupt-controller@10200220 {
+ compatible = "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0x10200220 0x1c>;
+ };
+
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
#interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
reg = <0x10211000 0x1000>,
<0x10212000 0x1000>;
};
-};
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt6577-uart";
+ reg = <0x11002000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt6577-uart";
+ reg = <0x11003000 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt6577-uart";
+ reg = <0x11004000 0x400>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt6577-uart";
+ reg = <0x11005000 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+};
reg = <0 0x80000000 0 0x40000000>;
};
};
+
+&uart0 {
+ status = "okay";
+};
/ {
compatible = "mediatek,mt8127";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&sysirq>;
cpus {
#address-cells = <1>;
clock-frequency = <32000>;
#clock-cells = <0>;
};
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
};
soc {
compatible = "mediatek,mt8127-timer",
"mediatek,mt6577-timer";
reg = <0 0x10008000 0 0x80>;
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>, <&rtc_clk>;
clock-names = "system-clk", "rtc-clk";
};
+ sysirq: interrupt-controller@10200100 {
+ compatible = "mediatek,mt8127-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200100 0 0x1c>;
+ };
+
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a7-gic";
interrupt-controller;
#interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
<0 0x10212000 0 0x1000>,
<0 0x10214000 0 0x2000>,
<0 0x10216000 0 0x2000>;
};
+
+ uart0: serial@11006000 {
+ compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11007000 {
+ compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@11008000 {
+ compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart3: serial@11009000 {
+ compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
};
};
reg = <0 0x80000000 0 0x40000000>;
};
};
+
+&uart3 {
+ status = "okay";
+};
/ {
compatible = "mediatek,mt8135";
- interrupt-parent = <&gic>;
+ interrupt-parent = <&sysirq>;
cpu-map {
cluster0 {
clock-frequency = <32000>;
#clock-cells = <0>;
};
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
};
soc {
compatible = "mediatek,mt8135-timer",
"mediatek,mt6577-timer";
reg = <0 0x10008000 0 0x80>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>, <&rtc_clk>;
clock-names = "system-clk", "rtc-clk";
};
+ sysirq: interrupt-controller@10200030 {
+ compatible = "mediatek,mt8135-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200030 0 0x1c>;
+ };
+
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
reg = <0 0x10211000 0 0x1000>,
<0 0x10212000 0 0x1000>,
<0 0x10214000 0 0x2000>,
<0 0x10216000 0 0x2000>;
};
+
+ uart0: serial@11006000 {
+ compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+ reg = <0 0x11006000 0 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11007000 {
+ compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+ reg = <0 0x11007000 0 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@11008000 {
+ compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+ reg = <0 0x11008000 0 0x400>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart3: serial@11009000 {
+ compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+ reg = <0 0x11009000 0 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
};
};
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
};
+
+&gpmc {
+ ranges = <0 0 0x00000000 0x01000000>;
+
+ nand@0,0 {
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ ti,nand-ecc-opt = "sw";
+
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <120>;
+ gpmc,cs-wr-off-ns = <120>;
+
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <120>;
+ gpmc,adv-wr-off-ns = <120>;
+
+ gpmc,we-on-ns = <6>;
+ gpmc,we-off-ns = <90>;
+
+ gpmc,oe-on-ns = <6>;
+ gpmc,oe-off-ns = <90>;
+
+ gpmc,page-burst-access-ns = <6>;
+ gpmc,access-ns = <72>;
+ gpmc,cycle2cycle-delay-ns = <60>;
+
+ gpmc,rd-cycle-ns = <120>;
+ gpmc,wr-cycle-ns = <120>;
+ gpmc,wr-access-ns = <186>;
+ gpmc,wr-data-mux-bus-ns = <90>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "xloader";
+ reg = <0 0x80000>;
+ };
+ partition@0x80000 {
+ label = "uboot";
+ reg = <0x80000 0x1e0000>;
+ };
+ partition@0x260000 {
+ label = "uboot environment";
+ reg = <0x260000 0x40000>;
+ };
+ partition@0x2a0000 {
+ label = "linux";
+ reg = <0x2a0000 0x400000>;
+ };
+ partition@0x6a0000 {
+ label = "rootfs";
+ reg = <0x6a0000 0x1f880000>;
+ };
+ };
+};
#include "omap-gpmc-smsc911x.dtsi"
&gpmc {
- ranges = <5 0 0x2c000000 0x01000000>;
+ ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
+ <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
smsc1: ethernet@gpmc {
compatible = "smsc,lan9221", "smsc,lan9115";
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
};
+
+ tv0: connector@1 {
+ compatible = "svideo-connector";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&opa_out>;
+ };
+ };
+ };
+
+ tv_amp: opa362 {
+ compatible = "ti,opa362";
+ enable-gpios = <&gpio1 23 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ opa_in: endpoint@0 {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ opa_out: endpoint@0 {
+ remote-endpoint = <&tv_connector_in>;
+ };
+ };
+ };
+ };
};
&omap3_pmx_core {
};
};
+&venc {
+ status = "okay";
+
+ vdda-supply = <&vdac>;
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&opa_in>;
+ ti,channels = <2>;
+ ti,invert-polarity;
+ };
+ };
+};
+
&gpmc {
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
regulator-name = "V28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on; /* due battery cover sensor */
+ regulator-always-on; /* due to battery cover sensor */
};
&vaux2 {
regulator-name = "VIO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
-
};
&vintana1 {
&twl {
compatible = "ti,twl5031";
+
+ twl_power: power {
+ compatible = "ti,twl4030-power";
+ ti,use_poweroff;
+ };
};
&twl_gpio {
};
};
+&gpmc {
+ ranges = <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
+ <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
+};
};
};
-/*
- * The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
- * SB-T35 baseboard respectively.
- * This setting includes both chips in SBC-T3530 board device tree.
- */
&gpmc {
- ranges = <5 0 0x2c000000 0x01000000>,
- <4 0 0x2d000000 0x01000000>;
+ ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
+ <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
+ <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
};
&mmc1 {
};
&gpmc {
- ranges = <5 0 0x2c000000 0x01000000>,
- <4 0 0x2d000000 0x01000000>;
+ ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
+ <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
+ <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
};
&dss {
#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Qualcomm APQ8064/IFC6410";
function = "gsbi1";
};
};
+
+ card_detect: card_detect {
+ mux {
+ pins = "gpio26";
+ function = "gpio";
+ bias-disable;
+ };
+ };
};
gsbi@12440000 {
/* External micro SD card */
sdcc3: sdcc@12180000 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&card_detect>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
sdcc4: sdcc@121c0000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 32 0x4>;
+ interrupts = <0 16 0x4>;
};
intc: interrupt-controller@2000000 {
};
&mtu2 {
- status = "ok";
+ status = "okay";
};
&i2c2 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0 0 0x80000000>;
+ ranges = <0 0 0 0x20000000>;
};
};
/dts-v1/;
#include "r8a73a4.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "APE6EVM";
compatible = "renesas,ape6evm", "renesas,r8a73a4";
+ aliases {
+ serial0 = &scifa0;
+ };
+
chosen {
bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ stdout-path = &scifa0;
};
memory@40000000 {
reg = <2 0x00000000 0 0x40000000>;
};
- ape6evm_fixed_3v3: fixedregulator@0 {
+ vcc_mmc0: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "MMC0 Vcc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ vcc_sdhi0: regulator@1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ /* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */
+ ape6evm_fixed_1v8: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ape6evm_fixed_3v3: regulator@3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
};
lbsc {
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
ethernet@8000000 {
- compatible = "smsc,lan9118", "smsc,lan9115";
+ compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x08000000 0x1000>;
interrupt-parent = <&irqc1>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
smsc,irq-active-high;
smsc,irq-push-pull;
vdd33a-supply = <&ape6evm_fixed_3v3>;
- vddvario-supply = <&ape6evm_fixed_3v3>;
+ vddvario-supply = <&ape6evm_fixed_1v8>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 28 GPIO_ACTIVE_LOW>;
+ label = "GNSS_EN";
+ };
+ led2 {
+ gpios = <&pfc 126 GPIO_ACTIVE_LOW>;
+ label = "NFC_NRST";
+ };
+ led3 {
+ gpios = <&pfc 132 GPIO_ACTIVE_LOW>;
+ label = "GNSS_NRST";
+ };
+ led4 {
+ gpios = <&pfc 232 GPIO_ACTIVE_LOW>;
+ label = "BT_WAKEUP";
+ };
+ led5 {
+ gpios = <&pfc 250 GPIO_ACTIVE_LOW>;
+ label = "STROBE";
+ };
+ led6 {
+ gpios = <&pfc 288 GPIO_ACTIVE_LOW>;
+ label = "BBRESETOUT";
+ };
+ };
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ zero-key {
+ gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_0>;
+ label = "S16";
+ };
+
+ menu-key {
+ gpios = <&pfc 325 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_MENU>;
+ label = "S17";
+ };
+
+ home-key {
+ gpios = <&pfc 326 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ label = "S18";
+ };
+
+ back-key {
+ gpios = <&pfc 327 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ label = "S19";
+ };
+
+ volup-key {
+ gpios = <&pfc 328 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ label = "S20";
+ };
+
+ voldown-key {
+ gpios = <&pfc 329 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "S21";
};
};
};
>;
voltage-tolerance = <1>; /* 1% */
};
+
+&cmt1 {
+ status = "okay";
+};
+
+&pfc {
+ scifa0_pins: serial0 {
+ renesas,groups = "scifa0_data";
+ renesas,function = "scifa0";
+ };
+
+ mmc0_pins: mmc {
+ renesas,groups = "mmc0_data8", "mmc0_ctrl";
+ renesas,function = "mmc0";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi1_pins: sd1 {
+ renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+ renesas,function = "sdhi1";
+ };
+};
+
+&mmcif0 {
+ vmmc-supply = <&vcc_mmc0>;
+ bus-width = <8>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ status = "okay";
+};
+
+&scifa0 {
+ pinctrl-0 = <&scifa0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi0 {
+ vmmc-supply = <&vcc_sdhi0>;
+ bus-width = <4>;
+ toshiba,mmc-wrprotect-disable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhi0_pins>;
+ status = "okay";
+};
+
+&sdhi1 {
+ vmmc-supply = <&ape6evm_fixed_3v3>;
+ bus-width = <4>;
+ broken-cd;
+ toshiba,mmc-wrprotect-disable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhi1_pins>;
+ status = "okay";
+};
<1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ dbsc1: memory-controller@e6790000 {
+ compatible = "renesas,dbsc-r8a73a4";
+ reg = <0 0xe6790000 0 0x10000>;
+ };
+
+ dbsc2: memory-controller@e67a0000 {
+ compatible = "renesas,dbsc-r8a73a4";
+ reg = <0 0xe67a0000 0 0x10000>;
+ };
+
dmac: dma-multiplexer {
compatible = "renesas,shdma-mux";
#dma-cells = <1>;
pinctrl-names = "default";
phy-handle = <&phy0>;
- status = "ok";
+ status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
&cmt1 {
- status = "ok";
+ status = "okay";
};
&i2c0 {
device_type = "cpu";
reg = <0x0>;
clock-frequency = <800000000>;
+ power-domains = <&pd_a3sm>;
};
};
<0xc2000000 0x1000>;
};
+ dbsc3: memory-controller@fe400000 {
+ compatible = "renesas,dbsc3-r8a7740";
+ reg = <0xfe400000 0x400>;
+ power-domains = <&pd_a4s>;
+ };
+
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
};
+ ptm {
+ compatible = "arm,coresight-etm3x";
+ power-domains = <&pd_d4>;
+ };
+
cmt1: timer@e6138000 {
compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
reg = <0xe6138000 0x170>;
interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
clock-names = "fck";
+ power-domains = <&pd_c5>;
renesas,channels-mask = <0x3f>;
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+ power-domains = <&pd_a4s>;
};
/* irqpin1: IRQ8 - IRQ15 */
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+ power-domains = <&pd_a4s>;
};
/* irqpin2: IRQ16 - IRQ23 */
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+ power-domains = <&pd_a4s>;
};
/* irqpin3: IRQ24 - IRQ31 */
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+ power-domains = <&pd_a4s>;
};
ether: ethernet@e9a00000 {
<0xe9a01800 0x800>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
+ power-domains = <&pd_a4s>;
phy-mode = "mii";
#address-cells = <1>;
#size-cells = <0>;
0 203 IRQ_TYPE_LEVEL_HIGH
0 204 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
+ power-domains = <&pd_a4r>;
status = "disabled";
};
0 72 IRQ_TYPE_LEVEL_HIGH
0 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
clock-names = "sci_ick";
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+ power-domains = <&pd_c5>;
};
tpu: pwm@e6600000 {
compatible = "renesas,tpu-r8a7740", "renesas,tpu";
reg = <0xe6600000 0x100>;
clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
#pwm-cells = <3>;
};
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
0 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_MMC>;
+ power-domains = <&pd_a3sp>;
status = "disabled";
};
0 118 IRQ_TYPE_LEVEL_HIGH
0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
0 122 IRQ_TYPE_LEVEL_HIGH
0 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
0 126 IRQ_TYPE_LEVEL_HIGH
0 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
+ power-domains = <&pd_a3sp>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
reg = <0xfe1f0000 0x400>;
interrupts = <0 9 0x4>;
clocks = <&mstp3_clks R8A7740_CLK_FSI>;
+ power-domains = <&pd_a4mp>;
status = "disabled";
};
<0 200 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
clock-names = "fck";
+ power-domains = <&pd_a4r>;
#renesas,channels = <3>;
<0 172 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
clock-names = "fck";
+ power-domains = <&pd_a4r>;
#renesas,channels = <3>;
reg = <0xe6150080 4>;
clocks = <&sub_clk>, <&sub_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2
>;
clock-output-names =
<&cpg_clocks R8A7740_CLK_HPP>, <&sub_clk>,
<&cpg_clocks R8A7740_CLK_B>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0
R8A7740_CLK_LCDC1 R8A7740_CLK_IIC0 R8A7740_CLK_TMU1
R8A7740_CLK_LCDC0
<&sub_clk>, <&sub_clk>, <&sub_clk>,
<&sub_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA
R8A7740_CLK_SCIFA7
R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1
R8A7740_CLK_USBF R8A7740_CLK_SDHI0 R8A7740_CLK_SDHI1
R8A7740_CLK_MMC R8A7740_CLK_GETHER R8A7740_CLK_TPU0
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7740_CLK_USBH R8A7740_CLK_SDHI2
R8A7740_CLK_USBFUNC R8A7740_CLK_USBPHY
>;
"usbhost", "sdhi2", "usbfunc", "usphy";
};
};
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+ reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+ pm-domains {
+ pd_c5: c5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a4lc: a4lc@1 {
+ reg = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4mp: a4mp@2 {
+ reg = <2>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_d4: d4@3 {
+ reg = <3>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a4r: a4r@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3rv: a3rv@6 {
+ reg = <6>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a4s: a4s@10 {
+ reg = <10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3sp: a3sp@11 {
+ reg = <11>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3sm: a3sm@12 {
+ reg = <12>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_a3sg: a3sg@13 {
+ reg = <13>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a4su: a4su@20 {
+ reg = <20>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
};
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/r8a7779-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
<0xf0000100 0x100>;
};
+ timer@f0000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xf0000600 0x20>;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg_clocks R8A7779_CLK_ZS>;
+ };
+
gpio0: gpio@ffc40000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc40000 0x2c>;
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe40000 0x100>;
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe41000 0x100>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe42000 0x100>;
interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe43000 0x100>;
interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe44000 0x100>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
clock-names = "sci_ick";
status = "disabled";
};
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe45000 0x100>;
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg_clocks R8A7779_CLK_P>;
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
clock-names = "sci_ick";
status = "disabled";
};
<&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_S>,
<&cpg_clocks R8A7779_CLK_S>,
- <&cpg_clocks R8A7779_CLK_S1>,
- <&cpg_clocks R8A7779_CLK_S1>,
- <&cpg_clocks R8A7779_CLK_S1>,
- <&cpg_clocks R8A7779_CLK_S1>,
- <&cpg_clocks R8A7779_CLK_S1>,
- <&cpg_clocks R8A7779_CLK_S1>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_P>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7779_CLK_HSPI R8A7779_CLK_TMU2
R8A7779_CLK_TMU1 R8A7779_CLK_TMU0
R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0
<&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_S>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7779_CLK_USB01 R8A7779_CLK_USB2
R8A7779_CLK_DU R8A7779_CLK_VIN2
R8A7779_CLK_VIN1 R8A7779_CLK_VIN0
clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
<&s4_clk>, <&s4_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2
R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0
R8A7779_CLK_MMC1 R8A7779_CLK_MMC0
phy-handle = <&phy1>;
renesas,ether-link-active-low;
- status = "ok";
+ status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
&cmt0 {
- status = "ok";
+ status = "okay";
};
&mmcif1 {
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
+ spi-cpha;
+ spi-cpol;
m25p,fast-read;
partition@0 {
};
&iic0 {
- status = "ok";
+ status = "okay";
};
&iic1 {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&iic1_pins>;
pinctrl-names = "default";
};
&iic2 {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&iic2_pins>;
pinctrl-names = "default";
pinctrl-0 = <&vin1_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
port {
#address-cells = <1>;
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
+ /* Single DAI */
#sound-dai-cells = <0>;
status = "okay";
reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
clocks = <&mp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <R8A7790_CLK_MSIOF0>;
+ clock-indices = <R8A7790_CLK_MSIOF0>;
clock-output-names = "msiof0";
};
mstp1_clks: mstp1_clks@e6150134 {
<&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
<&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1
R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1
R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC
<&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>,
<&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0
R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1
R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2
<&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
<&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1
- R8A7790_CLK_THERMAL R8A7790_CLK_PWM>;
+ clock-indices = <
+ R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1
+ R8A7790_CLK_THERMAL R8A7790_CLK_PWM
+ >;
clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
};
mstp7_clks: mstp7_clks@e615014c {
<&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>,
<&zx_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1
R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0
R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0
mstp8_clks: mstp8_clks@e6150990 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
- clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>,
- <&zs_clk>, <&zs_clk>;
+ clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
+ <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
- R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1
- R8A7790_CLK_VIN0 R8A7790_CLK_ETHER R8A7790_CLK_SATA1
- R8A7790_CLK_SATA0
+ clock-indices = <
+ R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2
+ R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 R8A7790_CLK_ETHER
+ R8A7790_CLK_SATA1 R8A7790_CLK_SATA0
>;
clock-output-names =
- "vin3", "vin2", "vin1", "vin0", "ether", "sata1", "sata0";
+ "mlb", "vin3", "vin2", "vin1", "vin0", "ether",
+ "sata1", "sata0";
};
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
<&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>,
<&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3
R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0
R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS
};
rcar_sound: rcar_sound@ec500000 {
- #sound-dai-cells = <1>;
- compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
};
rcar_sound,src {
- src0: src@0 { };
- src1: src@1 { };
- src2: src@2 { };
- src3: src@3 { };
- src4: src@4 { };
- src5: src@5 { };
- src6: src@6 { };
- src7: src@7 { };
- src8: src@8 { };
- src9: src@9 { };
+ src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; };
+ src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; };
+ src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; };
+ src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; };
+ src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; };
+ src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; };
+ src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; };
+ src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; };
+ src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; };
+ src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; };
};
rcar_sound,ssi {
phy-handle = <&phy1>;
renesas,ether-link-active-low;
- status = "ok";
+ status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
/* composite video input */
&vin0 {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&vin0_pins>;
pinctrl-names = "default";
phy-handle = <&phy1>;
renesas,ether-link-active-low;
- status = "ok";
+ status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
&cmt0 {
- status = "ok";
+ status = "okay";
};
&sata0 {
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
+ spi-cpha;
+ spi-cpol;
m25p,fast-read;
partition@0 {
read-only;
};
partition@80000 {
- label = "bootenv";
- reg = <0x00080000 0x00080000>;
+ label = "user";
+ reg = <0x00080000 0x00580000>;
read-only;
};
- partition@100000 {
- label = "data";
- reg = <0x00100000 0x03f00000>;
+ partition@600000 {
+ label = "flash";
+ reg = <0x00600000 0x03a00000>;
};
};
};
/* composite video input */
&vin1 {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&vin1_pins>;
pinctrl-names = "default";
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
+ /* Single DAI */
#sound-dai-cells = <0>;
status = "okay";
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
gpio0: gpio@e6050000 {
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
cmt0: timer@ffca0000 {
reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
clocks = <&mp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <R8A7791_CLK_MSIOF0>;
+ clock-indices = <R8A7791_CLK_MSIOF0>;
clock-output-names = "msiof0";
};
mstp1_clks: mstp1_clks@e6150134 {
<&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>,
<&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU
R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG
R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0
<&mp_clk>, <&mp_clk>, <&mp_clk>,
<&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0
R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1
R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2
<&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
<&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1
R8A7791_CLK_SSUSB R8A7791_CLK_CMT1
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1
- R8A7791_CLK_THERMAL R8A7791_CLK_PWM>;
+ clock-indices = <
+ R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1
+ R8A7791_CLK_THERMAL R8A7791_CLK_PWM
+ >;
clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
};
mstp7_clks: mstp7_clks@e615014c {
<&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
<&zx_clk>, <&zx_clk>, <&zx_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0
R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1
mstp8_clks: mstp8_clks@e6150990 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
- clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>,
- <&zs_clk>;
+ clocks = <&zg_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>,
+ <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
+ R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB
R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
>;
clock-output-names =
- "vin2", "vin1", "vin0", "ether", "sata1", "sata0";
+ "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", "ether",
+ "sata1", "sata0";
};
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
<&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
<&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4
R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0
R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5
reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5
>;
clock-output-names = "scifa3", "scifa4", "scifa5";
};
rcar_sound: rcar_sound@ec500000 {
- #sound-dai-cells = <1>;
- compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
};
rcar_sound,src {
- src0: src@0 { };
- src1: src@1 { };
- src2: src@2 { };
- src3: src@3 { };
- src4: src@4 { };
- src5: src@5 { };
- src6: src@6 { };
- src7: src@7 { };
- src8: src@8 { };
- src9: src@9 { };
+ src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; };
+ src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; };
+ src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; };
+ src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; };
+ src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; };
+ src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; };
+ src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; };
+ src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; };
+ src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; };
+ src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; };
};
rcar_sound,ssi {
};
&cmt0 {
- status = "ok";
+ status = "okay";
};
&scif2 {
- status = "ok";
+ status = "okay";
};
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
cmt0: timer@ffca0000 {
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
irqc0: interrupt-controller@e61c0000 {
clock-output-names = "main", "pll0", "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "z";
};
+ /* Variable factor clocks */
+ sd1_clk: sd2_clk@e6150078 {
+ compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150078 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sd1";
+ };
+ sd2_clk: sd3_clk@e615007c {
+ compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615007c 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sd2";
+ };
+ mmc0_clk: mmc0_clk@e6150240 {
+ compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150240 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mmc0";
+ };
/* Fixed factor clocks */
pll1_div2_clk: pll1_div2_clk {
reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
clocks = <&mp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <R8A7794_CLK_MSIOF0>;
+ clock-indices = <R8A7794_CLK_MSIOF0>;
clock-output-names = "msiof0";
};
mstp1_clks: mstp1_clks@e6150134 {
<&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>,
<&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7794_CLK_VCP0 R8A7794_CLK_VPC0 R8A7794_CLK_TMU1
R8A7794_CLK_3DG R8A7794_CLK_2DDMAC R8A7794_CLK_FDP1_0
R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 R8A7794_CLK_CMT0
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
- <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0
R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1
R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2
+ R8A7794_CLK_SYS_DMAC1 R8A7794_CLK_SYS_DMAC0
>;
clock-output-names =
"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
- "scifb1", "msiof1", "scifb2";
+ "scifb1", "msiof1", "scifb2",
+ "sys-dmac1", "sys-dmac0";
};
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&rclk_clk>;
+ clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
+ <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
- R8A7794_CLK_CMT1
+ clock-indices = <
+ R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0
+ R8A7794_CLK_MMCIF0 R8A7794_CLK_CMT1
+ R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
>;
clock-output-names =
- "cmt1";
+ "sdhi2", "sdhi1", "sdhi0",
+ "mmcif0", "cmt1", "usbdmac0", "usbdmac1";
};
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
+ clocks = <&mp_clk>, <&mp_clk>,
+ <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
+ R8A7794_CLK_EHCI R8A7794_CLK_HSUSB
R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
R8A7794_CLK_SCIF0
>;
clock-output-names =
+ "ehci", "hsusb",
"hscif2", "scif5", "scif4", "hscif1", "hscif0",
"scif3", "scif2", "scif1", "scif0";
};
reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
clocks = <&zg_clk>, <&zg_clk>, <&p_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER
>;
clock-output-names =
"vin1", "vin0", "ether";
};
+ mstp9_clks: mstp9_clks@e6150994 {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+ clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
+ <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
+ R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1
+ R8A7794_CLK_I2C0
+ >;
+ clock-output-names =
+ "qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
+ };
mstp11_clks: mstp11_clks@e615099c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <
+ clock-indices = <
R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5
>;
clock-output-names = "scifa3", "scifa4", "scifa5";
};
};
+ sram: sram@00300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x20000>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
compatible = "atmel,at91sam9g45-isi";
reg = <0xf0034000 0x4000>;
interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isi_data_0_7>;
+ clocks = <&isi_clk>;
+ clock-names = "isi_clk";
status = "disabled";
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ sfr: sfr@f0038000 {
+ compatible = "atmel,sama5d3-sfr", "syscon";
+ reg = <0xf0038000 0x60>;
};
mmc1: mmc@f8000000 {
};
isi {
- pinctrl_isi: isi-0 {
+ pinctrl_isi_data_0_7: isi-0-data-0-7 {
atmel,pins =
<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC30 periph C ISI_PCK, conflicts with UTXD0 */
AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
- AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
- AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+ AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+ };
+
+ pinctrl_isi_data_8_9: isi-0-data-8-9 {
+ atmel,pins =
+ <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
};
- pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
+
+ pinctrl_isi_data_10_11: isi-0-data-10-11 {
atmel,pins =
- <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */
+ <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
+ AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
};
};
d2 {
label = "d2";
gpios = <&pioE 25 GPIO_ACTIVE_LOW>; /* PE25, conflicts with A25, RXD2 */
+ linux,default-trigger = "heartbeat";
};
};
};
*/
i2c0: i2c@f0014000 {
wm8904: wm8904@1a {
- compatible = "wm8904";
+ compatible = "wlf,wm8904";
reg = <0x1a>;
clocks = <&pck0>;
clock-names = "mclk";
};
};
+ i2c1: i2c@f0018000 {
+ ov2640: camera@0x30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+ resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+ pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+ /* use pck1 for the master clock of ov2640 */
+ clocks = <&pck1>;
+ clock-names = "xvclk";
+ assigned-clocks = <&pck1>;
+ assigned-clock-rates = <25000000>;
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&isi_0>;
+ bus-width = <8>;
+ };
+ };
+ };
+ };
+
usart1: serial@f0020000 {
dmas = <0>, <0>; /* Do not use DMA for usart1 */
pinctrl-names = "default";
};
isi: isi@f0034000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+ port {
+ isi_0: endpoint {
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ };
+ };
};
mmc1: mmc@f8000000 {
<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */
};
- pinctrl_isi_reset: isi_reset-0 {
+ pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+ atmel,pins =
+ <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */
+ };
+
+ pinctrl_sensor_reset: sensor_reset-0 {
atmel,pins =
<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */
};
- pinctrl_isi_power: isi_power-0 {
+ pinctrl_sensor_power: sensor_power-0 {
atmel,pins =
<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
};
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
+ gpio3 = &pioD;
gpio4 = &pioE;
tcb0 = &tcb0;
tcb1 = &tcb1;
};
};
+ ns_sram: sram@00210000 {
+ compatible = "mmio-sram";
+ reg = <0x00210000 0x10000>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
};
nand0: nand@80000000 {
- compatible = "atmel,at91rm9200-nand";
+ compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand";
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
};
+ sfr: sfr@f8028000 {
+ compatible = "atmel,sama5d4-sfr", "syscon";
+ reg = <0xf8028000 0x60>;
+ };
+
mmc1: mmc@fc000000 {
compatible = "atmel,hsmci";
reg = <0xfc000000 0x600>;
clocks = <&pioC_clk>;
};
+ pioD: gpio@fc068000 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfc068000 0x100>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioD_clk>;
+ status = "disabled";
+ };
+
pioE: gpio@fc06d000 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfc06d000 0x100>;
};
&cmt1 {
- status = "ok";
+ status = "okay";
};
&i2c0 {
<0xf0000100 0x100>;
};
+ sbsc2: memory-controller@fb400000 {
+ compatible = "renesas,sbsc-sh73a0";
+ reg = <0xfb400000 0x400>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sec", "temp";
+ };
+
+ sbsc1: memory-controller@fe400000 {
+ compatible = "renesas,sbsc-sh73a0";
+ reg = <0xfe400000 0x400>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 36 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sec", "temp";
+ };
+
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>,
sh_fsi2: sound@ec230000 {
#sound-dai-cells = <1>;
- compatible = "renesas,sh_fsi2";
+ compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2";
reg = <0xec230000 0x400>;
interrupts = <0 146 0x4>;
status = "disabled";
* published by the Free Software Foundation.
*/
/dts-v1/;
-#include "stih407-clock.dtsi"
-#include "stih407-family.dtsi"
#include "stihxxx-b2120.dtsi"
+#include "stih407.dtsi"
/ {
model = "STiH407 B2120";
compatible = "st,stih407-b2120", "st,stih407";
status = "disabled";
};
+
+ usb2_picophy0: phy1 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0x100 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+ };
+
+ miphy28lp_phy: miphy28lp@9b22000 {
+ compatible = "st,miphy28lp-phy";
+ st,syscfg = <&syscfg_core>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ phy_port0: port@9b22000 {
+ reg = <0x9b22000 0xff>,
+ <0x9b09000 0xff>,
+ <0x9b04000 0xff>;
+ reg-names = "sata-up",
+ "pcie-up",
+ "pipew";
+
+ st,syscfg = <0x114 0x818 0xe0 0xec>;
+ #phy-cells = <1>;
+
+ reset-names = "miphy-sw-rst";
+ resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
+ };
+
+ phy_port1: port@9b2a000 {
+ reg = <0x9b2a000 0xff>,
+ <0x9b19000 0xff>,
+ <0x9b14000 0xff>;
+ reg-names = "sata-up",
+ "pcie-up",
+ "pipew";
+
+ st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+ #phy-cells = <1>;
+
+ reset-names = "miphy-sw-rst";
+ resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
+ };
+
+ phy_port2: port@8f95000 {
+ reg = <0x8f95000 0xff>,
+ <0x8f90000 0xff>;
+ reg-names = "pipew",
+ "usb3-up";
+
+ st,syscfg = <0x11c 0x820>;
+
+ #phy-cells = <1>;
+
+ reset-names = "miphy-sw-rst";
+ resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
+ };
+ };
};
};
--- /dev/null
+/*
+ * Copyright (C) 2015 STMicroelectronics Limited.
+ * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-clock.dtsi"
+#include "stih407-family.dtsi"
+/ {
+ soc {
+ /* Display */
+ vtg_main: sti-vtg-main@8d02800 {
+ compatible = "st,vtg";
+ reg = <0x8d02800 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux@8d00200 {
+ compatible = "st,vtg";
+ reg = <0x8d00200 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ };
+
+ sti-display-subsystem {
+ compatible = "st,sti-display-subsystem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ assigned-clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP4>;
+
+ assigned-clock-parents = <0>,
+ <0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>;
+
+ assigned-clock-rates = <297000000>, <297000000>;
+
+ ranges;
+
+ sti-compositor@9d11000 {
+ compatible = "st,stih407-compositor";
+ reg = <0x9d11000 0x1000>;
+
+ clock-names = "compo_main",
+ "compo_aux",
+ "pix_main",
+ "pix_aux",
+ "pix_gdp1",
+ "pix_gdp2",
+ "pix_gdp3",
+ "pix_gdp4",
+ "main_parent",
+ "aux_parent";
+
+ clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+ <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+ <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP4>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+
+ reset-names = "compo-main", "compo-aux";
+ resets = <&softreset STIH407_COMPO_SOFTRESET>,
+ <&softreset STIH407_COMPO_SOFTRESET>;
+ st,vtg = <&vtg_main>, <&vtg_aux>;
+ };
+
+ sti-tvout@8d08000 {
+ compatible = "st,stih407-tvout";
+ reg = <0x8d08000 0x1000>;
+ reg-names = "tvout-reg";
+ reset-names = "tvout";
+ resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+ <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+ <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+ <&clk_s_d0_flexgen CLK_PCM_0>,
+ <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+ <&clk_s_d2_flexgen CLK_HDDAC>;
+
+ assigned-clock-parents = <&clk_s_d2_quadfs 0>,
+ <&clk_tmdsout_hdmi>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d0_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>;
+ ranges;
+
+ sti-hdmi@8d04000 {
+ compatible = "st,stih407-hdmi";
+ reg = <0x8d04000 0x1000>;
+ reg-names = "hdmi-reg";
+ interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+ interrupt-names = "irq";
+ clock-names = "pix",
+ "tmds",
+ "phy",
+ "audio",
+ "main_parent",
+ "aux_parent";
+
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+ <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+ <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+ <&clk_s_d0_flexgen CLK_PCM_0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+
+ hdmi,hpd-gpio = <&pio5 3>;
+ reset-names = "hdmi";
+ resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+ ddc = <&hdmiddc>;
+
+ };
+
+ sti-hda@8d02000 {
+ compatible = "st,stih407-hda";
+ reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+ reg-names = "hda-reg", "video-dacs-ctrl";
+ clock-names = "pix",
+ "hddac",
+ "main_parent",
+ "aux_parent";
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+ <&clk_s_d2_flexgen CLK_HDDAC>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+ };
+ };
+ };
+ };
+};
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
/ {
+ soc {
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+ };
+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
+ };
+
+ ohci0: usb@9a03c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0x9a03c00 0x100>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy1>;
+ phy-names = "usb";
+ };
+
+ ehci0: usb@9a03e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0x9a03e00 0x100>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy1>;
+ phy-names = "usb";
+ };
+
+ ohci1: usb@9a83c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0x9a83c00 0x100>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy2>;
+ phy-names = "usb";
+ };
+
+ ehci1: usb@9a83e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0x9a83e00 0x100>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy2>;
+ phy-names = "usb";
+ };
+
+ /* Display */
+ vtg_main: sti-vtg-main@8d02800 {
+ compatible = "st,vtg";
+ reg = <0x8d02800 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux@8d00200 {
+ compatible = "st,vtg";
+ reg = <0x8d00200 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ };
+
+ sti-display-subsystem {
+ compatible = "st,sti-display-subsystem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ assigned-clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP4>;
+
+ assigned-clock-parents = <0>,
+ <0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>;
+
+ assigned-clock-rates = <297000000>, <297000000>;
+
+ ranges;
+
+ sti-compositor@9d11000 {
+ compatible = "st,stih407-compositor";
+ reg = <0x9d11000 0x1000>;
+
+ clock-names = "compo_main",
+ "compo_aux",
+ "pix_main",
+ "pix_aux",
+ "pix_gdp1",
+ "pix_gdp2",
+ "pix_gdp3",
+ "pix_gdp4",
+ "main_parent",
+ "aux_parent";
+
+ clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+ <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+ <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+ <&clk_s_d2_flexgen CLK_PIX_GDP4>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+
+ reset-names = "compo-main", "compo-aux";
+ resets = <&softreset STIH407_COMPO_SOFTRESET>,
+ <&softreset STIH407_COMPO_SOFTRESET>;
+ st,vtg = <&vtg_main>, <&vtg_aux>;
+ };
+
+ sti-tvout@8d08000 {
+ compatible = "st,stih407-tvout";
+ reg = <0x8d08000 0x1000>;
+ reg-names = "tvout-reg";
+ reset-names = "tvout";
+ resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+ <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+ <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+ <&clk_s_d0_flexgen CLK_PCM_0>,
+ <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+ <&clk_s_d2_flexgen CLK_HDDAC>;
+
+ assigned-clock-parents = <&clk_s_d2_quadfs 0>,
+ <&clk_tmdsout_hdmi>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d0_quadfs 0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 0>;
+ ranges;
+
+ sti-hdmi@8d04000 {
+ compatible = "st,stih407-hdmi";
+ reg = <0x8d04000 0x1000>;
+ reg-names = "hdmi-reg";
+ interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+ interrupt-names = "irq";
+ clock-names = "pix",
+ "tmds",
+ "phy",
+ "audio",
+ "main_parent",
+ "aux_parent";
+
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+ <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+ <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+ <&clk_s_d0_flexgen CLK_PCM_0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+
+ hdmi,hpd-gpio = <&pio5 3>;
+ reset-names = "hdmi";
+ resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+ ddc = <&hdmiddc>;
+
+ };
+
+ sti-hda@8d02000 {
+ compatible = "st,stih407-hda";
+ reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+ reg-names = "hda-reg", "video-dacs-ctrl";
+ clock-names = "pix",
+ "hddac",
+ "main_parent",
+ "aux_parent";
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+ <&clk_s_d2_flexgen CLK_HDDAC>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
+ };
+ };
+ };
+ };
};
--- /dev/null
+/*
+ * Copyright (C) 2015 STMicroelectronics (R&D) Limited.
+ * Author: Maxime Coquelin <maxime.coquelin@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih418.dtsi"
+/ {
+ model = "STiH418 B2199";
+ compatible = "st,stih418-b2199", "st,stih418";
+
+ chosen {
+ bootargs = "console=ttyAS0,115200 clk_ignore_unused";
+ linux,stdout-path = &sbc_serial0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0xc0000000>;
+ };
+
+ aliases {
+ ttyAS0 = &sbc_serial0;
+ };
+
+ soc {
+ sbc_serial0: serial@9530000 {
+ status = "okay";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ red {
+ #gpio-cells = <2>;
+ label = "Front Panel LED";
+ gpios = <&pio4 1 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ #gpio-cells = <2>;
+ gpios = <&pio1 3 0>;
+ default-state = "off";
+ };
+ };
+
+ i2c@9842000 {
+ status = "okay";
+ };
+
+ i2c@9843000 {
+ status = "okay";
+ };
+
+ i2c@9844000 {
+ status = "okay";
+ };
+
+ i2c@9845000 {
+ status = "okay";
+ };
+
+ i2c@9540000 {
+ status = "okay";
+ };
+
+ /* SSC11 to HDMI */
+ i2c@9541000 {
+ status = "okay";
+ /* HDMI V1.3a supports Standard mode only */
+ clock-frequency = <100000>;
+ st,i2c-min-scl-pulse-width-us = <0>;
+ st,i2c-min-sda-pulse-width-us = <5>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2015 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <dt-bindings/clock/stih418-clks.h>
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ compatible = "st,stih418-clk", "simple-bus";
+
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ clk_sysin: clk-sysin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ clock-output-names = "CLK_SYSIN";
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * A9 PLL.
+ */
+ clockgen-a9@92b0000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x92b0000 0xffff>;
+
+ clockgen_a9_pll: clockgen-a9-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clockgen-a9-pll-odf";
+ };
+ };
+
+ /*
+ * ARM CPU related clocks.
+ */
+ clk_m_a9: clk-m-a9@92b0000 {
+ #clock-cells = <0>;
+ compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+ reg = <0x92b0000 0x10000>;
+
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_s_c0_flexgen 13>;
+
+ clock-output-names = "clk-m-a9-ext2f-div2";
+
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ clk_ext2f_a9: clockgen-c0@13 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ clock-output-names = "clk-s-icn-reg-0";
+ };
+
+ clockgen-a@090ff000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x90ff000 0x1000>;
+
+ clk_s_a0_pll: clk-s-a0-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-pll-ofd-0";
+ };
+
+ clk_s_a0_flexgen: clk-s-a0-flexgen {
+ compatible = "st,flexgen";
+
+ #clock-cells = <1>;
+
+ clocks = <&clk_s_a0_pll 0>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-ic-lmi0",
+ "clk-ic-lmi1";
+ };
+ };
+
+ clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-C", "st,quadfs";
+ reg = <0x9103000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-fs0-ch0",
+ "clk-s-c0-fs0-ch1",
+ "clk-s-c0-fs0-ch2",
+ "clk-s-c0-fs0-ch3";
+ };
+
+ clk_s_c0: clockgen-c@09103000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9103000 0x1000>;
+
+ clk_s_c0_pll0: clk-s-c0-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll0-odf-0";
+ };
+
+ clk_s_c0_pll1: clk-s-c0-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll1-odf-0";
+ };
+
+ clk_s_c0_flexgen: clk-s-c0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_c0_pll0 0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_quadfs 0>,
+ <&clk_s_c0_quadfs 1>,
+ <&clk_s_c0_quadfs 2>,
+ <&clk_s_c0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-icn-gpu",
+ "clk-fdma",
+ "clk-nand",
+ "clk-hva",
+ "clk-proc-stfe",
+ "clk-tp",
+ "clk-rx-icn-dmu",
+ "clk-rx-icn-hva",
+ "clk-icn-cpu",
+ "clk-tx-icn-dmu",
+ "clk-mmc-0",
+ "clk-mmc-1",
+ "clk-jpegdec",
+ "clk-icn-reg",
+ "clk-proc-bdisp-0",
+ "clk-proc-bdisp-1",
+ "clk-pp-dmu",
+ "clk-vid-dmu",
+ "clk-dss-lpc",
+ "clk-st231-aud-0",
+ "clk-st231-gp-1",
+ "clk-st231-dmu",
+ "clk-icn-lmi",
+ "clk-tx-icn-1",
+ "clk-icn-sbc",
+ "clk-stfe-frc2",
+ "clk-eth-phyref",
+ "clk-eth-ref-phyclk",
+ "clk-flash-promip",
+ "clk-main-disp",
+ "clk-aux-disp",
+ "clk-compo-dvp",
+ "clk-tx-icn-hades",
+ "clk-rx-icn-hades",
+ "clk-icn-reg-16",
+ "clk-pp-hevc",
+ "clk-clust-hevc",
+ "clk-hwpe-hevc",
+ "clk-fc-hevc",
+ "clk-proc-mixer",
+ "clk-proc-sc",
+ "clk-avsp-hevc";
+ };
+ };
+
+ clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9104000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d0-fs0-ch0",
+ "clk-s-d0-fs0-ch1",
+ "clk-s-d0-fs0-ch2",
+ "clk-s-d0-fs0-ch3";
+ };
+
+ clockgen-d0@09104000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9104000 0x1000>;
+
+ clk_s_d0_flexgen: clk-s-d0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d0_quadfs 0>,
+ <&clk_s_d0_quadfs 1>,
+ <&clk_s_d0_quadfs 2>,
+ <&clk_s_d0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-pcm-0",
+ "clk-pcm-1",
+ "clk-pcm-2",
+ "clk-spdiff",
+ "clk-pcmr10-master",
+ "clk-usb2-phy";
+ };
+ };
+
+ clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9106000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d2-fs0-ch0",
+ "clk-s-d2-fs0-ch1",
+ "clk-s-d2-fs0-ch2",
+ "clk-s-d2-fs0-ch3";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ clockgen-d2@x9106000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9106000 0x1000>;
+
+ clk_s_d2_flexgen: clk-s-d2-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>,
+ <&clk_s_d2_quadfs 2>,
+ <&clk_s_d2_quadfs 3>,
+ <&clk_sysin>,
+ <&clk_sysin>,
+ <&clk_tmdsout_hdmi>;
+
+ clock-output-names = "clk-pix-main-disp",
+ "",
+ "",
+ "",
+ "",
+ "clk-tmds-hdmi-div2",
+ "clk-pix-aux-disp",
+ "clk-denc",
+ "clk-pix-hddac",
+ "clk-hddac",
+ "clk-sddac",
+ "clk-pix-dvo",
+ "clk-dvo",
+ "clk-pix-hdmi",
+ "clk-tmds-hdmi",
+ "clk-ref-hdmiphy",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "", "", "", "",
+ "", "clk-vp9";
+ };
+ };
+
+ clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9107000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d3-fs0-ch0",
+ "clk-s-d3-fs0-ch1",
+ "clk-s-d3-fs0-ch2",
+ "clk-s-d3-fs0-ch3";
+ };
+
+ clockgen-d3@9107000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9107000 0x1000>;
+
+ clk_s_d3_flexgen: clk-s-d3-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d3_quadfs 0>,
+ <&clk_s_d3_quadfs 1>,
+ <&clk_s_d3_quadfs 2>,
+ <&clk_s_d3_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-stfe-frc1",
+ "clk-tsout-0",
+ "clk-tsout-1",
+ "clk-mchi",
+ "clk-vsens-compo",
+ "clk-frc1-remote",
+ "clk-lpc-0",
+ "clk-lpc-1";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih418-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stih410-pinctrl.dtsi"
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ };
+ };
+
+ soc {
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+ };
+
+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
+ };
+
+ ohci0: usb@9a03c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0x9a03c00 0x100>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy1>;
+ phy-names = "usb";
+ };
+
+ ehci0: usb@9a03e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0x9a03e00 0x100>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy1>;
+ phy-names = "usb";
+ };
+
+ ohci1: usb@9a83c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0x9a83c00 0x100>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy2>;
+ phy-names = "usb";
+ };
+
+ ehci1: usb@9a83e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0x9a83e00 0x100>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy2>;
+ phy-names = "usb";
+ };
+ };
+};
};
/* SSC11 to HDMI */
- i2c@9541000 {
+ hdmiddc: i2c@9541000 {
status = "okay";
/* HDMI V1.3a supports Standard mode only */
clock-frequency = <100000>;
st,i2c-min-scl-pulse-width-us = <0>;
st,i2c-min-sda-pulse-width-us = <5>;
};
+
+ miphy28lp_phy: miphy28lp@9b22000 {
+
+ phy_port0: port@9b22000 {
+ st,osc-rdy;
+ };
+
+ phy_port1: port@9b2a000 {
+ st,osc-force-ext;
+ };
+ };
};
};
*/
/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele A1000";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
emac_power_pin_a1000: emac_power_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
led_pins_a1000: led_pins@0 {
allwinner,pins = "PH10", "PH20";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
red {
label = "a1000:red:usr";
- gpios = <&pio 7 10 0>;
+ gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
};
blue {
label = "a1000:blue:usr";
- gpios = <&pio 7 20 0>;
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
};
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pio 7 15 0>;
+ gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
};
reg_usb1_vbus: usb1-vbus {
*/
/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "BA10 tvbox";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
};
reg_usb2_vbus: usb2-vbus {
- gpio = <&pio 7 12 0>;
+ gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Chuwi V7 CW0825";
+ compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
*/
/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Cubietech Cubieboard";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
led_pins_cubieboard: led_pins@0 {
allwinner,pins = "PH20", "PH21";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
+
+ spi0: spi@01c05000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+ };
};
leds {
blue {
label = "cubieboard:blue:usr";
- gpios = <&pio 7 21 0>; /* LED1 */
+ gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
};
green {
label = "cubieboard:green:usr";
- gpios = <&pio 7 20 0>; /* LED2 */
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
linux,default-trigger = "heartbeat";
};
};
status = "okay";
};
};
+
+#include "axp209.dtsi"
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
*/
/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Miniand Hackberry";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
hackberry_hogs: hogs@0 {
allwinner,pins = "PH19";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
allwinner,pins = "PH12";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pio 7 19 0>;
+ gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
};
reg_usb1_vbus: usb1-vbus {
reg_usb2_vbus: usb2-vbus {
pinctrl-0 = <&usb2_vbus_pin_hackberry>;
- gpio = <&pio 7 12 0>;
+ gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Hyundai A7HD";
+ compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+®_usb2_vbus {
+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb2_vbus_pin_a {
+ allwinner,pins = "PH6";
+};
+
+&usbphy {
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
*/
/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "INet-97F Rev 02";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
--- /dev/null
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "HAOYU Electronics Marsboard A10";
+ compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_marsboard>;
+
+ red1 {
+ label = "marsboard:red1:usr";
+ gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ red2 {
+ label = "marsboard:red2:usr";
+ gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ red3 {
+ label = "marsboard:red3:usr";
+ gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ red4 {
+ label = "marsboard:red4:usr";
+ gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ahci {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ led_pins_marsboard: led_pins@0 {
+ allwinner,pins = "PB5", "PB6", "PB7", "PB8";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
*/
/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "PineRiver Mini X-Plus";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
pinctrl@01c20800 {
ir0_pins_a: ir0@0 {
/* The ir receiver is not always populated */
- allwinner,pull = <1>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "MK802";
+ compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
+ allwinner,pins = "PH12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ pinctrl-0 = <&usb2_vbus_pin_mk802>;
+ gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "MK802ii";
+ compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
*/
/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A10-OLinuXino-LIME";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
allwinner,pins = "PC3";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
led_pins_olinuxinolime: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
green {
label = "a10-olinuxino-lime:green:usr";
- gpios = <&pio 7 2 0>;
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
reg_ahci_5v: ahci-5v {
pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
- gpio = <&pio 2 3 0>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
*/
/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "LinkSprite pcDuino";
status = "okay";
};
+ pinctrl@01c20800 {
+ led_pins_pcduino: led_pins@0 {
+ allwinner,pins = "PH15", "PH16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ key_pins_pcduino: key_pins@0 {
+ allwinner,pins = "PH17", "PH18", "PH19";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
mdio@01c0b080 {
status = "okay";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
};
};
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_pcduino>;
+
+ tx {
+ label = "pcduino:green:tx";
+ gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+ };
+
+ rx {
+ label = "pcduino:green:rx";
+ gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_pcduino>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "Key Back";
+ linux,code = <KEY_BACK>;
+ gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+ };
+
+ button@1 {
+ label = "Key Home";
+ linux,code = <KEY_HOME>;
+ gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+ };
+
+ button@2 {
+ label = "Key Menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
reg_usb1_vbus: usb1-vbus {
status = "okay";
};
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&intc>;
<&ahb_gates 44>;
status = "disabled";
};
+
+ framebuffer@1 {
+ compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+ <&ahb_gates 44>, <&ahb_gates 46>;
+ status = "disabled";
+ };
+
+ framebuffer@2 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
+ <&ahb_gates 46>;
+ status = "disabled";
+ };
+
+ framebuffer@3 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+ clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+ <&ahb_gates 44>, <&ahb_gates 46>;
+ status = "disabled";
+ };
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
+ clocks = <&cpu>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1056000 1500000
+ 1008000 1400000
+ 912000 1350000
+ 864000 1300000
+ 624000 1250000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <4>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&rtp>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <850000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
};
interrupts = <10>;
clocks = <&ahb_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 27>, <&dma 1 26>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+ <&dma SUN4I_DMA_DEDICATED 26>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
interrupts = <11>;
clocks = <&ahb_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 9>, <&dma 1 8>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+ <&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
status = "disabled";
};
- mdio@01c0b080 {
+ mdio: mdio@01c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
reg-names = "phy_ctrl", "pmu1", "pmu2";
clocks = <&usb_clk 8>;
clock-names = "usb_phy";
- resets = <&usb_clk 1>, <&usb_clk 2>;
- reset-names = "usb1_reset", "usb2_reset";
+ resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
interrupts = <12>;
clocks = <&ahb_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 29>, <&dma 1 28>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+ <&dma SUN4I_DMA_DEDICATED 28>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
interrupts = <50>;
clocks = <&ahb_gates 23>, <&spi3_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 31>, <&dma 1 30>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+ <&dma SUN4I_DMA_DEDICATED 30>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
pwm0_pins_a: pwm0@0 {
allwinner,pins = "PB2";
allwinner,function = "pwm";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
pwm1_pins_a: pwm1@0 {
allwinner,pins = "PI3";
allwinner,function = "pwm";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_b: uart0@1 {
allwinner,pins = "PF2", "PF4";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_a: uart1@0 {
allwinner,pins = "PA10", "PA11";
allwinner,function = "uart1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB18", "PB19";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB20", "PB21";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
emac_pins_a: emac0@0 {
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "emac";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
allwinner,pins = "PH1";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
ir0_pins_a: ir0@0 {
allwinner,pins = "PB3","PB4";
allwinner,function = "ir0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir1_pins_a: ir1@0 {
allwinner,pins = "PB22","PB23";
allwinner,function = "ir1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi0_pins_a: spi0@0 {
+ allwinner,pins = "PI10", "PI11", "PI12", "PI13";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi1_pins_a: spi1@0 {
+ allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+ allwinner,function = "spi1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_pins_a: spi2@0 {
+ allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_pins_b: spi2@1 {
+ allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ps20_pins_a: ps20@0 {
+ allwinner,pins = "PI20", "PI21";
+ allwinner,function = "ps2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ps21_pins_a: ps21@0 {
+ allwinner,pins = "PH12", "PH13";
+ allwinner,function = "ps2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
status = "disabled";
};
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
+ #thermal-sensor-cells = <0>;
};
uart0: serial@01c28000 {
#address-cells = <1>;
#size-cells = <0>;
};
+
+ ps20: ps2@01c2a000 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <62>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
+
+ ps21: ps2@01c2a400 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a400 0x400>;
+ interrupts = <63>;
+ clocks = <&apb1_gates 7>;
+ status = "disabled";
+ };
};
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "MK802-A10s";
+ compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_mk802>;
+
+ red {
+ label = "mk802:red:usr";
+ gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+ };
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ led_pins_mk802: led_pins@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
+ allwinner,pins = "PB10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_mk802>;
+ gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
*/
/dts-v1/;
-/include/ "sun5i-a10s.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A10s-Olinuxino Micro";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 1 0>; /* PG1 */
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
cd-inverted;
status = "okay";
};
pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 13 0>; /* PG13 */
+ cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
cd-inverted;
status = "okay";
};
mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
allwinner,pins = "PG1";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
allwinner,pins = "PG13";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PE3";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
allwinner,pins = "PB10";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ lradc: lradc@01c22800 {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
+
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
+
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
+
+ button@795 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <795090>;
+ };
+
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
};
};
green {
label = "a10s-olinuxino-micro:green:usr";
- gpios = <&pio 4 3 0>;
+ gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
reg_usb1_vbus: usb1-vbus {
pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
- gpio = <&pio 1 10 0>;
+ gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
*/
/dts-v1/;
-/include/ "sun5i-a10s.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "R7 A10s hdmi tv-stick";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 1 0>; /* PG1 */
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
cd-inverted;
status = "okay";
};
mmc0_cd_pin_r7: mmc0_cd_pin@0 {
allwinner,pins = "PG1";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
led_pins_r7: led_pins@0 {
allwinner,pins = "PB2";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb1_vbus_pin_r7: usb1_vbus_pin@0 {
allwinner,pins = "PG13";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
green {
label = "r7-tv-dongle:green:usr";
- gpios = <&pio 1 2 0>;
+ gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
reg_usb1_vbus: usb1-vbus {
pinctrl-0 = <&usb1_vbus_pin_r7>;
- gpio = <&pio 6 13 0>;
+ gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&intc>;
<&ahb_gates 44>;
status = "disabled";
};
+
+ framebuffer@1 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+ status = "disabled";
+ };
};
cpus {
interrupts = <10>;
clocks = <&ahb_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 27>, <&dma 1 26>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+ <&dma SUN4I_DMA_DEDICATED 26>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
interrupts = <11>;
clocks = <&ahb_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 9>, <&dma 1 8>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+ <&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
status = "disabled";
};
- mdio@01c0b080 {
+ mdio: mdio@01c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
reg-names = "phy_ctrl", "pmu1";
clocks = <&usb_clk 8>;
clock-names = "usb_phy";
- resets = <&usb_clk 1>;
- reset-names = "usb1_reset";
+ resets = <&usb_clk 0>, <&usb_clk 1>;
+ reset-names = "usb0_reset", "usb1_reset";
status = "disabled";
};
interrupts = <12>;
clocks = <&ahb_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 29>, <&dma 1 28>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+ <&dma SUN4I_DMA_DEDICATED 28>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
uart0_pins_a: uart0@0 {
allwinner,pins = "PB19", "PB20";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart2_pins_a: uart2@0 {
allwinner,pins = "PC18", "PC19";
allwinner,function = "uart2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins_a: uart3@0 {
allwinner,pins = "PG9", "PG10";
allwinner,function = "uart3";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
emac_pins_a: emac0@0 {
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "emac";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB15", "PB16";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB17", "PB18";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc1_pins_a: mmc1@0 {
allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
allwinner,function = "mmc1";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
reg = <0x01c20c90 0x10>;
};
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
+ #thermal-sensor-cells = <0>;
};
uart0: serial@01c28000 {
*/
/dts-v1/;
-/include/ "sun5i-a13.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "HSG H702";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 0 0>; /* PG0 */
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
cd-inverted;
status = "okay";
};
usbphy: phy@01c13400 {
- /*
- * There doesn't seem to be a GPIO for controlling
- * usb1 vbus, despite the fex file saying otherwise.
- */
- usb1_vbus-supply = <®_vcc5v0>;
+ usb1_vbus-supply = <®_ldo3>;
status = "okay";
};
mmc0_cd_pin_h702: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
};
};
};
+
+#include "axp209.dtsi"
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_ldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
*/
/dts-v1/;
-/include/ "sun5i-a13.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A13-Olinuxino Micro";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 0 0>; /* PG0 */
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
cd-inverted;
status = "okay";
};
mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
led_pins_olinuxinom: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
allwinner,pins = "PG11";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
power {
label = "a13-olinuxino-micro:green:power";
- gpios = <&pio 6 9 0>;
+ gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
reg_usb1_vbus: usb1-vbus {
pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
- gpio = <&pio 6 11 0>;
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
*/
/dts-v1/;
-/include/ "sun5i-a13.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A13-Olinuxino";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 0 0>; /* PG0 */
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
cd-inverted;
status = "okay";
};
mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
allwinner,pins = "PG11";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ lradc: lradc@01c22800 {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
+
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
+
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
+
+ button@795 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <795090>;
+ };
+
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
i2c1: i2c@01c2b000 {
pinctrl-0 = <&led_pins_olinuxino>;
power {
- gpios = <&pio 6 9 0>;
+ gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
reg_usb1_vbus: usb1-vbus {
pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
- gpio = <&pio 6 11 0>;
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&intc>;
serial1 = &uart3;
};
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+ status = "disabled";
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
+ clocks = <&cpu>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1104000 1500000
+ 1008000 1400000
+ 912000 1350000
+ 864000 1300000
+ 624000 1200000
+ 576000 1200000
+ 432000 1200000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <6>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&rtp>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <850000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
};
interrupts = <10>;
clocks = <&ahb_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 27>, <&dma 1 26>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+ <&dma SUN4I_DMA_DEDICATED 26>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
interrupts = <11>;
clocks = <&ahb_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 9>, <&dma 1 8>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+ <&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
reg-names = "phy_ctrl", "pmu1";
clocks = <&usb_clk 8>;
clock-names = "usb_phy";
- resets = <&usb_clk 1>;
- reset-names = "usb1_reset";
+ resets = <&usb_clk 0>, <&usb_clk 1>;
+ reset-names = "usb0_reset", "usb1_reset";
status = "disabled";
};
interrupts = <12>;
clocks = <&ahb_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 29>, <&dma 1 28>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+ <&dma SUN4I_DMA_DEDICATED 28>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
uart1_pins_a: uart1@0 {
allwinner,pins = "PE10", "PE11";
allwinner,function = "uart1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_b: uart1@1 {
allwinner,pins = "PG3", "PG4";
allwinner,function = "uart1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB15", "PB16";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB17", "PB18";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
reg = <0x01c20c90 0x10>;
};
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
+ #thermal-sensor-cells = <0>;
};
uart1: serial@01c28400 {
*/
/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Allwinner A31 APP4 EVB1 Evaluation Board";
usb1_vbus_pin_a: usb1_vbus_pin@0 {
allwinner,pins = "PH27";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
reg_usb1_vbus: usb1-vbus {
pinctrl-0 = <&usb1_vbus_pin_a>;
- gpio = <&pio 7 27 0>;
+ gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
*/
/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "WITS A31 Colombus Evaluation Board";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
- cd-gpios = <&pio 0 8 0>; /* PA8 */
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
cd-inverted;
status = "okay";
};
pio: pinctrl@01c20800 {
mmc0_pins_a: mmc0@0 {
- allwinner,pull = <1>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
allwinner,pins = "PA8";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
allwinner,pins = "PH24";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
reg_usb2_vbus: usb2-vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb2_vbus_pin_colombus>;
- gpio = <&pio 7 24 0>;
+ gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
*/
/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Merrii A31 Hummingbird";
chosen {
bootargs = "earlyprintk console=ttyS0,115200";
};
+};
+
+&ehci0 {
+ status = "okay";
+};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 0 8 0>; /* PA8 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c19400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c1a000 {
- status = "okay";
- };
-
- ohci0: usb@01c1a400 {
- status = "okay";
- };
-
- pio: pinctrl@01c20800 {
- mmc0_pins_a: mmc0@0 {
- /* external pull-ups missing for some pins */
- allwinner,pull = <1>;
- };
-
- mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
- };
-
- usb1_vbus_pin_a: usb1_vbus_pin@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- /* pull-ups and devices require AXP221 DLDO3 */
- status = "failed";
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
-
- pcf8563: rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
- };
-
- gmac: ethernet@01c30000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
- phy = <&phy1>;
- phy-mode = "rgmii";
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ /* pull-ups and devices require AXP221 DLDO3 */
+ status = "failed";
+};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_a>;
- gpio = <&pio 7 24 0>; /* PH24 */
- status = "okay";
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
};
};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc0_pins_a {
+ /* external pull-ups missing for some pins */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
+ allwinner,pins = "PA8";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+®_usb1_vbus {
+ gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb1_vbus_pin_a {
+ /* different pin from sunxi-common-regulators */
+ allwinner,pins = "PH24";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
*/
/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele M9 / A1000G Quad top set box";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 22 0>; /* PH22 */
+ cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
cd-inverted;
status = "okay";
};
led_pins_m9: led_pins@0 {
allwinner,pins = "PH13";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_m9: mmc0_cd_pin@0 {
allwinner,pins = "PH22";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb1_vbus_pin_m9: usb1_vbus_pin@0 {
allwinner,pins = "PC27";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
reg = <1>;
};
};
+
+ ir@01f02000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+ };
};
leds {
blue {
label = "m9:blue:usr";
- gpios = <&pio 7 13 0>;
+ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
};
};
reg_usb1_vbus: usb1-vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_m9>;
- gpio = <&pio 2 27 0>;
+ gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
clocks = <&pll6 0>;
status = "disabled";
};
+
+ framebuffer@1 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&pll6 0>;
+ status = "disabled";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
};
cpus {
pmu {
compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
- interrupts = <0 120 4>,
- <0 121 4>,
- <0 122 4>,
- <0 123 4>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
};
clocks {
dma: dma-controller@01c02000 {
compatible = "allwinner,sun6i-a31-dma";
reg = <0x01c02000 0x1000>;
- interrupts = <0 50 4>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 6>;
resets = <&ahb1_rst 6>;
#dma-cells = <1>;
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 8>;
reset-names = "ahb";
- interrupts = <0 60 4>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 9>;
reset-names = "ahb";
- interrupts = <0 61 4>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 10>;
reset-names = "ahb";
- interrupts = <0 62 4>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 11>;
reset-names = "ahb";
- interrupts = <0 63 4>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
ehci0: usb@01c1a000 {
compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
- interrupts = <0 72 4>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 26>;
resets = <&ahb1_rst 26>;
phys = <&usbphy 1>;
ohci0: usb@01c1a400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
- interrupts = <0 73 4>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 29>, <&usb_clk 16>;
resets = <&ahb1_rst 29>;
phys = <&usbphy 1>;
ehci1: usb@01c1b000 {
compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
- interrupts = <0 74 4>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 27>;
resets = <&ahb1_rst 27>;
phys = <&usbphy 2>;
ohci1: usb@01c1b400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
- interrupts = <0 75 4>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 30>, <&usb_clk 17>;
resets = <&ahb1_rst 30>;
phys = <&usbphy 2>;
ohci2: usb@01c1c400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
- interrupts = <0 77 4>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 31>, <&usb_clk 18>;
resets = <&ahb1_rst 31>;
status = "disabled";
pio: pinctrl@01c20800 {
compatible = "allwinner,sun6i-a31-pinctrl";
reg = <0x01c20800 0x400>;
- interrupts = <0 11 4>,
- <0 15 4>,
- <0 16 4>,
- <0 17 4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
uart0_pins_a: uart0@0 {
allwinner,pins = "PH20", "PH21";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PH14", "PH15";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PH16", "PH17";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PH18", "PH19";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_mii_a: gmac_mii@0 {
"PA20", "PA21", "PA22", "PA23",
"PA24", "PA26", "PA27";
allwinner,function = "gmac";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_gmii_a: gmac_gmii@0 {
* data lines in GMII mode run at 125MHz and
* might need a higher signal drive strength
*/
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
- allwinner,drive = <3>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
timer@01c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
- interrupts = <0 18 4>,
- <0 19 4>,
- <0 20 4>,
- <0 21 4>,
- <0 22 4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
reg = <0x01c20ca0 0x20>;
};
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun6i-a31-ts";
+ reg = <0x01c25000 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <0>;
+ };
+
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
- interrupts = <0 0 4>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
- interrupts = <0 1 4>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
- interrupts = <0 2 4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
- interrupts = <0 3 4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
- interrupts = <0 4 4>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
- interrupts = <0 5 4>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 21>;
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
- interrupts = <0 6 4>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 0>;
resets = <&apb2_rst 0>;
status = "disabled";
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
- interrupts = <0 7 4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 1>;
resets = <&apb2_rst 1>;
status = "disabled";
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
- interrupts = <0 8 4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 2>;
resets = <&apb2_rst 2>;
status = "disabled";
i2c3: i2c@01c2b800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b800 0x400>;
- interrupts = <0 9 4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 3>;
resets = <&apb2_rst 3>;
status = "disabled";
gmac: ethernet@01c30000 {
compatible = "allwinner,sun7i-a20-gmac";
reg = <0x01c30000 0x1054>;
- interrupts = <0 82 4>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
timer@01c60000 {
compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
- interrupts = <0 51 4>,
- <0 52 4>,
- <0 53 4>,
- <0 54 4>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 19>;
resets = <&ahb1_rst 19>;
};
spi0: spi@01c68000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c68000 0x1000>;
- interrupts = <0 65 4>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
dmas = <&dma 23>, <&dma 23>;
spi1: spi@01c69000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c69000 0x1000>;
- interrupts = <0 66 4>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
dmas = <&dma 24>, <&dma 24>;
spi2: spi@01c6a000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c6a000 0x1000>;
- interrupts = <0 67 4>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
dmas = <&dma 25>, <&dma 25>;
spi3: spi@01c6b000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c6b000 0x1000>;
- interrupts = <0 68 4>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 23>, <&spi3_clk>;
clock-names = "ahb", "mod";
dmas = <&dma 26>, <&dma 26>;
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
rtc: rtc@01f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
- interrupts = <0 40 4>, <0 41 4>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
nmi_intc: interrupt-controller@01f00c0c {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01f00c0c 0x38>;
- interrupts = <0 32 4>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
prcm@01f01400 {
"apb0_i2c";
};
+ ir_clk: ir_clk {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ clocks = <&osc32k>, <&osc24M>;
+ clock-output-names = "ir";
+ };
+
apb0_rst: apb0_rst {
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
reg = <0x01f01c00 0x300>;
};
+ ir: ir@01f02000 {
+ compatible = "allwinner,sun5i-a13-ir";
+ clocks = <&apb0_gates 1>, <&ir_clk>;
+ clock-names = "apb", "ir";
+ resets = <&apb0_rst 1>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01f02000 0x40>;
+ status = "disabled";
+ };
+
r_pio: pinctrl@01f02c00 {
compatible = "allwinner,sun6i-a31-r-pinctrl";
reg = <0x01f02c00 0x400>;
- interrupts = <0 45 4>,
- <0 46 4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>;
resets = <&apb0_rst 0>;
gpio-controller;
#interrupt-cells = <2>;
#size-cells = <0>;
#gpio-cells = <3>;
+
+ ir_pins_a: ir@0 {
+ allwinner,pins = "PL4";
+ allwinner,function = "s_ir";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};
};
};
--- /dev/null
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "CSQ CS908 top set box";
+ compatible = "csq,cs908", "allwinner,sun6i-a31s";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ usb1_vbus_pin_csq908: usb1_vbus_pin@0 {
+ allwinner,pins = "PC27";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The A31s is the same die as the A31 in a different package, this is
+ * reflected by it having different pinctrl compatible everything else is
+ * identical.
+ */
+
+#include "sun6i-a31.dtsi"
+
+&pio {
+ compatible = "allwinner,sun6i-a31s-pinctrl";
+};
*/
/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "LeMaker Banana Pi";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 10 0>; /* PH10 */
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
cd-inverted;
status = "okay";
};
mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
allwinner,pins = "PH10";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
gmac_power_pin_bananapi: gmac_power_pin@0 {
allwinner,pins = "PH23";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
led_pins_bananapi: led_pins@0 {
allwinner,pins = "PH24";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
green {
label = "bananapi:green:usr";
- gpios = <&pio 7 24 0>;
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
};
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 7 23 0>;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
};
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "LeMaker Banana Pro";
+ compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_bananapro>;
+
+ blue {
+ label = "bananapro:blue:usr";
+ gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ green {
+ label = "bananapro:green:usr";
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_bananapro>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_vmmc3: vmmc3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmc3_pin_bananapro>;
+ regulator-name = "vmmc3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&ahci {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <®_vmmc3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ gmac_power_pin_bananapro: gmac_power_pin@0 {
+ allwinner,pins = "PH23";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_bananapro: led_pins@0 {
+ allwinner,pins = "PH24", "PG2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+ allwinner,pins = "PH0";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+ allwinner,pins = "PH1";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ vmmc3_pin_bananapro: vmmc3_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+ gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+ status = "okay";
+};
+
+®_usb2_vbus {
+ pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+ gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_a>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Cubietech Cubieboard2";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
led_pins_cubieboard2: led_pins@0 {
allwinner,pins = "PH20", "PH21";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
blue {
label = "cubieboard2:blue:usr";
- gpios = <&pio 7 21 0>;
+ gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
green {
label = "cubieboard2:green:usr";
- gpios = <&pio 7 20 0>;
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
};
status = "okay";
};
};
+
+#include "axp209.dtsi"
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
*
* Oliver Schinagl <oliver@schinagl.nl>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Cubietech Cubietruck";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
pinctrl@01c20800 {
mmc3_pins_a: mmc3@0 {
/* AP6210 requires pull-up */
- allwinner,pull = <1>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
vmmc3_pin_cubietruck: vmmc3_pin@0 {
allwinner,pins = "PH9";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
allwinner,pins = "PH12";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
led_pins_cubietruck: led_pins@0 {
allwinner,pins = "PH7", "PH11", "PH20", "PH21";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_vbus_pin_a: usb0_vbus_pin@0 {
allwinner,pins = "PH17";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
blue {
label = "cubietruck:blue:usr";
- gpios = <&pio 7 21 0>;
+ gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
orange {
label = "cubietruck:orange:usr";
- gpios = <&pio 7 20 0>;
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
white {
label = "cubietruck:white:usr";
- gpios = <&pio 7 11 0>;
+ gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
};
green {
label = "cubietruck:green:usr";
- gpios = <&pio 7 7 0>;
+ gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
};
};
reg_ahci_5v: ahci-5v {
pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
- gpio = <&pio 7 12 0>;
+ gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
reg_usb0_vbus: usb0-vbus {
pinctrl-0 = <&usb0_vbus_pin_a>;
- gpio = <&pio 7 17 0>;
+ gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
status = "okay";
};
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pio 7 9 0>;
+ gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
};
};
+
+#include "axp209.dtsi"
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
*/
/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Merrii A20 Hummingbird";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
allwinner,pins = "PH9";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
allwinner,pins = "PH16";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
};
phy-mode = "rgmii";
phy-supply = <®_gmac_vdd>;
/* phy reset config */
- snps,reset-gpio = <&pio 0 17 0>; /* PA17 */
+ snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
snps,reset-active-low;
/* wait 1s after reset, otherwise fail to read phy id */
snps,reset-delays-us = <0 10000 1000000>;
reg_ahci_5v: ahci-5v {
pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
- gpio = <&pio 7 15 0>; /* PH15 */
+ gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
reg_usb1_vbus: usb1-vbus {
pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
- gpio = <&pio 7 2 0>; /* PH2 */
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
status = "okay";
};
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
enable-active-high;
- gpio = <&pio 7 9 0>; /* PH9 */
+ gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
};
reg_gmac_vdd: gmac_vdd {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
enable-active-high;
- gpio = <&pio 7 16 0>; /* PH16 */
+ gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
};
};
*/
/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "I12 / Q5 / QT840A A20 tvbox";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
pinctrl@01c20800 {
mmc3_pins_a: mmc3@0 {
/* AP6210 / AP6330 requires pull-up */
- allwinner,pull = <1>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
allwinner,pins = "PH12";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
allwinner,pins = "PH21";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
led_pins_i12_tvbox: led_pins@0 {
allwinner,pins = "PH9", "PH20";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
red {
label = "i12_tvbox:red:usr";
- gpios = <&pio 7 9 1>;
+ gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
};
blue {
label = "i12_tvbox:blue:usr";
- gpios = <&pio 7 20 0>;
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
};
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pio 7 2 0>;
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
};
reg_vmmc3_io: vmmc3-io {
/* This controls VCC-PI, must be always on! */
regulator-always-on;
enable-active-high;
- gpio = <&pio 7 12 0>;
+ gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
};
reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <50000>;
enable-active-high;
- gpio = <&pio 7 21 0>;
+ gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
};
*/
/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele M3";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
led_pins_m3: led_pins@0 {
allwinner,pins = "PH20";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
blue {
label = "m3:blue:usr";
- gpios = <&pio 7 20 0>;
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
};
*/
/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-OLinuXino-LIME";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
allwinner,pins = "PC3";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
led_pins_olinuxinolime: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
green {
label = "a20-olinuxino-lime:green:usr";
- gpios = <&pio 7 2 0>;
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
reg_ahci_5v: ahci-5v {
pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
- gpio = <&pio 2 3 0>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
*/
/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-OLinuXino-LIME2";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
allwinner,pins = "PC3";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
led_pins_olinuxinolime: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
green {
label = "a20-olinuxino-lime2:green:usr";
- gpios = <&pio 7 2 0>;
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
reg_ahci_5v: ahci-5v {
pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
- gpio = <&pio 2 3 0>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
*/
/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-Olinuxino Micro";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 11 0>; /* PH11 */
+ cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
cd-inverted;
status = "okay";
};
mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
allwinner,pins = "PH11";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ lradc: lradc@01c22800 {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
+
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
+
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
+
+ button@795 {
+ label = "Search";
+ linux,code = <KEY_SEARCH>;
+ channel = <0>;
+ voltage = <795090>;
+ };
+
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
+ };
+
+ button@1184 {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ channel = <0>;
+ voltage = <1184678>;
+ };
+
+ button@1398 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <1398804>;
};
};
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
green {
label = "a20-olinuxino-micro:green:usr";
- gpios = <&pio 7 2 0>;
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
*/
/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "LinkSprite pcDuino3";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
led_pins_pcduino3: led_pins@0 {
allwinner,pins = "PH15", "PH16";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
key_pins_pcduino3: key_pins@0 {
allwinner,pins = "PH17", "PH18", "PH19";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
};
reg_ahci_5v: ahci-5v {
- gpio = <&pio 7 2 0>;
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
<&ahb_gates 44>;
status = "disabled";
};
+
+ framebuffer@1 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+ status = "disabled";
+ };
+
+ framebuffer@2 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-tve0";
+ clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+ <&ahb_gates 44>;
+ status = "disabled";
+ };
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ clocks = <&cpu>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1450000
+ 960000 1400000
+ 912000 1400000
+ 864000 1300000
+ 720000 1200000
+ 528000 1100000
+ 312000 1000000
+ 144000 900000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <7>;
};
cpu@1 {
};
};
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&rtp>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
memory {
reg = <0x40000000 0x80000000>;
};
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
- interrupts = <0 120 4>,
- <0 121 4>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
};
clocks {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01c00030 0x0c>;
- interrupts = <0 0 4>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
dma: dma-controller@01c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
- interrupts = <0 27 4>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 6>;
#dma-cells = <2>;
};
spi0: spi@01c05000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
- interrupts = <0 10 4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 27>, <&dma 1 26>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+ <&dma SUN4I_DMA_DEDICATED 26>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
spi1: spi@01c06000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
- interrupts = <0 11 4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 9>, <&dma 1 8>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+ <&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
- interrupts = <0 55 4>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 17>;
status = "disabled";
};
- mdio@01c0b080 {
+ mdio: mdio@01c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
reg = <0x01c0f000 0x1000>;
clocks = <&ahb_gates 8>, <&mmc0_clk>;
clock-names = "ahb", "mmc";
- interrupts = <0 32 4>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
reg = <0x01c10000 0x1000>;
clocks = <&ahb_gates 9>, <&mmc1_clk>;
clock-names = "ahb", "mmc";
- interrupts = <0 33 4>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
reg = <0x01c11000 0x1000>;
clocks = <&ahb_gates 10>, <&mmc2_clk>;
clock-names = "ahb", "mmc";
- interrupts = <0 34 4>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
reg = <0x01c12000 0x1000>;
clocks = <&ahb_gates 11>, <&mmc3_clk>;
clock-names = "ahb", "mmc";
- interrupts = <0 35 4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
ehci0: usb@01c14000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
- interrupts = <0 39 4>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 1>;
phys = <&usbphy 1>;
phy-names = "usb";
ohci0: usb@01c14400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
- interrupts = <0 64 4>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_clk 6>, <&ahb_gates 2>;
phys = <&usbphy 1>;
phy-names = "usb";
spi2: spi@01c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
- interrupts = <0 12 4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 29>, <&dma 1 28>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+ <&dma SUN4I_DMA_DEDICATED 28>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
ahci: sata@01c18000 {
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
- interrupts = <0 56 4>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pll6 0>, <&ahb_gates 25>;
status = "disabled";
};
ehci1: usb@01c1c000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
- interrupts = <0 40 4>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 3>;
phys = <&usbphy 2>;
phy-names = "usb";
ohci1: usb@01c1c400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
- interrupts = <0 65 4>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_clk 7>, <&ahb_gates 4>;
phys = <&usbphy 2>;
phy-names = "usb";
spi3: spi@01c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
- interrupts = <0 50 4>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 23>, <&spi3_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 31>, <&dma 1 30>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+ <&dma SUN4I_DMA_DEDICATED 30>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
- interrupts = <0 28 4>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
pwm0_pins_a: pwm0@0 {
allwinner,pins = "PB2";
allwinner,function = "pwm";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
pwm1_pins_a: pwm1@0 {
allwinner,pins = "PI3";
allwinner,function = "pwm";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart2_pins_a: uart2@0 {
allwinner,pins = "PI16", "PI17", "PI18", "PI19";
allwinner,function = "uart2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins_a: uart3@0 {
allwinner,pins = "PG6", "PG7", "PG8", "PG9";
allwinner,function = "uart3";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins_b: uart3@1 {
allwinner,pins = "PH0", "PH1";
allwinner,function = "uart3";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart4_pins_a: uart4@0 {
allwinner,pins = "PG10", "PG11";
allwinner,function = "uart4";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart5_pins_a: uart5@0 {
allwinner,pins = "PI10", "PI11";
allwinner,function = "uart5";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart6_pins_a: uart6@0 {
allwinner,pins = "PI12", "PI13";
allwinner,function = "uart6";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart7_pins_a: uart7@0 {
allwinner,pins = "PI20", "PI21";
allwinner,function = "uart7";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB18", "PB19";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB20", "PB21";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c3_pins_a: i2c3@0 {
allwinner,pins = "PI0", "PI1";
allwinner,function = "i2c3";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
emac_pins_a: emac0@0 {
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "emac";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
clk_out_a_pins_a: clk_out_a@0 {
allwinner,pins = "PI12";
allwinner,function = "clk_out_a";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
clk_out_b_pins_a: clk_out_b@0 {
allwinner,pins = "PI13";
allwinner,function = "clk_out_b";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_mii_a: gmac_mii@0 {
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "gmac";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
- allwinner,drive = <3>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi0_pins_a: spi0@0 {
allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14";
allwinner,function = "spi0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi1_pins_a: spi1@0 {
allwinner,pins = "PI16", "PI17", "PI18", "PI19";
allwinner,function = "spi1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_a: spi2@0 {
allwinner,pins = "PC19", "PC20", "PC21", "PC22";
allwinner,function = "spi2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_b: spi2@1 {
allwinner,pins = "PB14", "PB15", "PB16", "PB17";
allwinner,function = "spi2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
allwinner,pins = "PH1";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc2_pins_a: mmc2@0 {
allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11";
allwinner,function = "mmc2";
- allwinner,drive = <2>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc3_pins_a: mmc3@0 {
allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
allwinner,function = "mmc3";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir0_pins_a: ir0@0 {
allwinner,pins = "PB3","PB4";
allwinner,function = "ir0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir1_pins_a: ir1@0 {
allwinner,pins = "PB22","PB23";
allwinner,function = "ir1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ps20_pins_a: ps20@0 {
+ allwinner,pins = "PI20", "PI21";
+ allwinner,function = "ps2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ps21_pins_a: ps21@0 {
+ allwinner,pins = "PH12", "PH13";
+ allwinner,function = "ps2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
timer@01c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
- interrupts = <0 22 4>,
- <0 23 4>,
- <0 24 4>,
- <0 25 4>,
- <0 67 4>,
- <0 68 4>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
rtc: rtc@01c20d00 {
compatible = "allwinner,sun7i-a20-rtc";
reg = <0x01c20d00 0x20>;
- interrupts = <0 24 4>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
};
pwm: pwm@01c20e00 {
compatible = "allwinner,sun4i-a10-ir";
clocks = <&apb0_gates 6>, <&ir0_clk>;
clock-names = "apb", "ir";
- interrupts = <0 5 4>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21800 0x40>;
status = "disabled";
};
compatible = "allwinner,sun4i-a10-ir";
clocks = <&apb0_gates 7>, <&ir1_clk>;
clock-names = "apb", "ir";
- interrupts = <0 6 4>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21c00 0x40>;
status = "disabled";
};
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
rtp: rtp@01c25000 {
compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
- interrupts = <0 29 4>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <0>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
- interrupts = <0 1 4>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 16>;
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
- interrupts = <0 2 4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 17>;
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
- interrupts = <0 3 4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 18>;
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
- interrupts = <0 4 4>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 19>;
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
- interrupts = <0 17 4>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 20>;
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
- interrupts = <0 18 4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 21>;
uart6: serial@01c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
- interrupts = <0 19 4>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 22>;
uart7: serial@01c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
- interrupts = <0 20 4>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 23>;
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
- interrupts = <0 7 4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 0>;
status = "disabled";
#address-cells = <1>;
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
- interrupts = <0 8 4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 1>;
status = "disabled";
#address-cells = <1>;
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
- interrupts = <0 9 4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 2>;
status = "disabled";
#address-cells = <1>;
i2c3: i2c@01c2b800 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
- interrupts = <0 88 4>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 3>;
status = "disabled";
#address-cells = <1>;
i2c4: i2c@01c2c000 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
- interrupts = <0 89 4>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 15>;
status = "disabled";
#address-cells = <1>;
gmac: ethernet@01c50000 {
compatible = "allwinner,sun7i-a20-gmac";
reg = <0x01c50000 0x10000>;
- interrupts = <0 85 4>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
hstimer@01c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
- interrupts = <0 81 4>,
- <0 82 4>,
- <0 83 4>,
- <0 84 4>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 28>;
};
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ ps20: ps2@01c2a000 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
+
+ ps21: ps2@01c2a400 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a400 0x400>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb1_gates 7>;
+ status = "disabled";
};
};
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
+ * dtb file since some gpio-s surrounding the wlan/bluetooth are different,
+ * and it uses different camera sensors.
+ */
+
+#include "sun8i-a23-ippo-q8h-v5.dts"
+
+/ {
+ model = "Ippo Q8H Dual Core Tablet (v1.2)";
+ compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23";
+};
*/
/dts-v1/;
-/include/ "sun8i-a23.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Ippo Q8H Dual Core Tablet (v5)";
compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
+ aliases {
+ serial0 = &r_uart;
+ };
+
chosen {
bootargs = "earlyprintk console=ttyS0,115200";
};
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
- cd-gpios = <&pio 1 4 0>; /* PB4 */
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
cd-inverted;
status = "okay";
};
mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
allwinner,pins = "PB4";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+ };
+
+ lradc: lradc@01c22800 {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
};
};
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
serial5 = &r_uart;
};
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&pll6 0>;
+ status = "disabled";
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
dma: dma-controller@01c02000 {
compatible = "allwinner,sun8i-a23-dma";
reg = <0x01c02000 0x1000>;
- interrupts = <0 50 4>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 6>;
resets = <&ahb1_rst 6>;
#dma-cells = <1>;
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 8>;
reset-names = "ahb";
- interrupts = <0 60 4>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 9>;
reset-names = "ahb";
- interrupts = <0 61 4>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 10>;
reset-names = "ahb";
- interrupts = <0 62 4>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun8i-a23-pinctrl";
reg = <0x01c20800 0x400>;
- interrupts = <0 11 4>,
- <0 15 4>,
- <0 17 4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
uart0_pins_a: uart0@0 {
allwinner,pins = "PF2", "PF4";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc1_pins_a: mmc1@0 {
allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5";
allwinner,function = "mmc1";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PH2", "PH3";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PH4", "PH5";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PE12", "PE13";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
timer@01c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
- interrupts = <0 18 4>,
- <0 19 4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
wdt0: watchdog@01c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
- interrupts = <0 25 4>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
- interrupts = <0 0 4>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
- interrupts = <0 1 4>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
- interrupts = <0 2 4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
- interrupts = <0 3 4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
- interrupts = <0 4 4>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
- interrupts = <0 6 4>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 0>;
resets = <&apb2_rst 0>;
status = "disabled";
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
- interrupts = <0 7 4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 1>;
resets = <&apb2_rst 1>;
status = "disabled";
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
- interrupts = <0 8 4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 2>;
resets = <&apb2_rst 2>;
status = "disabled";
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
rtc: rtc@01f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
- interrupts = <0 40 4>, <0 41 4>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
prcm@01f01400 {
r_uart: serial@01f02800 {
compatible = "snps,dw-apb-uart";
reg = <0x01f02800 0x400>;
- interrupts = <0 38 4>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb0_gates 4>;
r_pio: pinctrl@01f02c00 {
compatible = "allwinner,sun8i-a23-r-pinctrl";
reg = <0x01f02c00 0x400>;
- interrupts = <0 45 4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>;
resets = <&apb0_rst 0>;
gpio-controller;
r_uart_pins_a: r_uart@0 {
allwinner,pins = "PL2", "PL3";
allwinner,function = "s_uart";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
};
*/
/dts-v1/;
-/include/ "sun9i-a80.dtsi"
+#include "sun9i-a80.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Merrii A80 Optimus Board";
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc {
- pio: pinctrl@06000800 {
- i2c3_pins_a: i2c3@0 {
- /* Enable internal pull-up */
- allwinner,pull = <1>;
- };
-
- led_pins_optimus: led-pins@0 {
- allwinner,pins = "PH0", "PH1";
- allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-
- uart4_pins_a: uart4@0 {
- /* Enable internal pull-up */
- allwinner,pull = <1>;
- };
- };
-
- uart0: serial@07000000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- uart4: serial@07001000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
- status = "okay";
- };
-
- i2c3: i2c@07003400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins_a>;
- status = "okay";
- };
- };
-
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
led2 {
label = "optimus:led2:usr";
- gpios = <&pio 7 1 0>;
+ gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
};
/* led3 is on PM15, in R_PIO */
led4 {
label = "optimus:led4:usr";
- gpios = <&pio 7 0 0>;
+ gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
};
};
};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_a>;
+ status = "okay";
+};
+
+&i2c3_pins_a {
+ /* Enable internal pull-up */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&pio {
+ led_pins_optimus: led-pins@0 {
+ allwinner,pins = "PH0", "PH1";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
+ allwinner,pins = "PH18";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&uart4_pins_a {
+ /* Enable internal pull-up */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton64.dtsi"
+#include "skeleton64.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
clock-output-names = "cci400";
};
+ mmc0_clk: clk@06000410 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x06000410 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc0", "mmc0_output",
+ "mmc0_sample";
+ };
+
+ mmc1_clk: clk@06000414 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x06000414 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc1", "mmc1_output",
+ "mmc1_sample";
+ };
+
+ mmc2_clk: clk@06000418 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x06000418 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc2", "mmc2_output",
+ "mmc2_sample";
+ };
+
+ mmc3_clk: clk@0600041c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x0600041c 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc3", "mmc3_output",
+ "mmc3_sample";
+ };
+
ahb0_gates: clk@06000580 {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
reg = <0x06000580 0x4>;
clocks = <&ahb0>;
+ clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
+ <14>, <15>, <16>, <18>, <20>, <21>,
+ <22>, <23>;
clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
"ahb0_ss", "ahb0_sd", "ahb0_nand1",
"ahb0_nand0", "ahb0_sdram",
compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
reg = <0x06000584 0x4>;
clocks = <&ahb1>;
+ clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
"ahb1_gmac", "ahb1_msgbox",
"ahb1_spinlock", "ahb1_hstimer",
compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
reg = <0x06000588 0x4>;
clocks = <&ahb2>;
+ clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
+ <11>;
clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
compatible = "allwinner,sun9i-a80-apb0-gates-clk";
reg = <0x06000590 0x4>;
clocks = <&apb0>;
+ clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
+ <17>, <18>, <19>;
clock-output-names = "apb0_spdif", "apb0_pio",
"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
"apb0_lradc", "apb0_gpadc", "apb0_twd",
compatible = "allwinner,sun9i-a80-apb1-gates-clk";
reg = <0x06000594 0x4>;
clocks = <&apb1>;
+ clock-indices = <0>, <1>, <2>, <3>, <4>,
+ <16>, <17>, <18>, <19>, <20>, <21>;
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
"apb1_uart0", "apb1_uart1",
*/
ranges = <0 0 0 0x20000000>;
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
+ <&mmc0_clk 1>, <&mmc0_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
+ <&mmc1_clk 1>, <&mmc1_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
+ <&mmc2_clk 1>, <&mmc2_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
+ <&mmc3_clk 1>, <&mmc3_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 3>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ mmc_config_clk: clk@01c13000 {
+ compatible = "allwinner,sun9i-a80-mmc-config-clk";
+ reg = <0x01c13000 0x10>;
+ clocks = <&ahb0_gates 8>;
+ clock-names = "ahb";
+ resets = <&ahb0_resets 8>;
+ reset-names = "ahb";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clock-output-names = "mmc0_config", "mmc1_config",
+ "mmc2_config", "mmc3_config";
+ };
+
gic: interrupt-controller@01c41000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c41000 0x1000>,
<0x01c46000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
ahb0_resets: reset@060005a0 {
timer@06000c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x06000c00 0xa0>;
- interrupts = <0 18 4>,
- <0 19 4>,
- <0 20 4>,
- <0 21 4>,
- <0 22 4>,
- <0 23 4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
pio: pinctrl@06000800 {
compatible = "allwinner,sun9i-a80-pinctrl";
reg = <0x06000800 0x400>;
- interrupts = <0 11 4>,
- <0 15 4>,
- <0 16 4>,
- <0 17 4>,
- <0 120 4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
i2c3_pins_a: i2c3@0 {
allwinner,pins = "PG10", "PG11";
allwinner,function = "i2c3";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_pins: mmc0 {
+ allwinner,pins = "PF0", "PF1" ,"PF2", "PF3",
+ "PF4", "PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc2_8bit_pins: mmc2_8bit {
+ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12",
+ "PC13", "PC14", "PC15";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PH12", "PH13";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart4_pins_a: uart4@0 {
allwinner,pins = "PG12", "PG13", "PG14", "PG15";
allwinner,function = "uart4";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
uart0: serial@07000000 {
compatible = "snps,dw-apb-uart";
reg = <0x07000000 0x400>;
- interrupts = <0 0 4>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 16>;
uart1: serial@07000400 {
compatible = "snps,dw-apb-uart";
reg = <0x07000400 0x400>;
- interrupts = <0 1 4>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 17>;
uart2: serial@07000800 {
compatible = "snps,dw-apb-uart";
reg = <0x07000800 0x400>;
- interrupts = <0 2 4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 18>;
uart3: serial@07000c00 {
compatible = "snps,dw-apb-uart";
reg = <0x07000c00 0x400>;
- interrupts = <0 3 4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 19>;
uart4: serial@07001000 {
compatible = "snps,dw-apb-uart";
reg = <0x07001000 0x400>;
- interrupts = <0 4 4>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 20>;
uart5: serial@07001400 {
compatible = "snps,dw-apb-uart";
reg = <0x07001400 0x400>;
- interrupts = <0 5 4>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 21>;
i2c0: i2c@07002800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002800 0x400>;
- interrupts = <0 6 4>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 0>;
resets = <&apb1_resets 0>;
status = "disabled";
i2c1: i2c@07002c00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002c00 0x400>;
- interrupts = <0 7 4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 1>;
resets = <&apb1_resets 1>;
status = "disabled";
i2c2: i2c@07003000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003000 0x400>;
- interrupts = <0 8 4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 2>;
resets = <&apb1_resets 2>;
status = "disabled";
i2c3: i2c@07003400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003400 0x400>;
- interrupts = <0 9 4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 3>;
resets = <&apb1_resets 3>;
status = "disabled";
i2c4: i2c@07003800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003800 0x400>;
- interrupts = <0 10 4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 4>;
resets = <&apb1_resets 4>;
status = "disabled";
r_wdt: watchdog@08001000 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x08001000 0x20>;
- interrupts = <0 36 4>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
};
r_uart: serial@08002800 {
compatible = "snps,dw-apb-uart";
reg = <0x08002800 0x400>;
- interrupts = <0 38 4>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc24M>;
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/ {
- soc@01c00000 {
- pio: pinctrl@01c20800 {
- ahci_pwr_pin_a: ahci_pwr_pin@0 {
- allwinner,pins = "PB8";
- allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
- usb0_vbus_pin_a: usb0_vbus_pin@0 {
- allwinner,pins = "PB9";
- allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
+&pio {
+ ahci_pwr_pin_a: ahci_pwr_pin@0 {
+ allwinner,pins = "PB8";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
- usb1_vbus_pin_a: usb1_vbus_pin@0 {
- allwinner,pins = "PH6";
- allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
+ usb0_vbus_pin_a: usb0_vbus_pin@0 {
+ allwinner,pins = "PB9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
- usb2_vbus_pin_a: usb2_vbus_pin@0 {
- allwinner,pins = "PH3";
- allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
- };
+ usb1_vbus_pin_a: usb1_vbus_pin@0 {
+ allwinner,pins = "PH6";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ usb2_vbus_pin_a: usb2_vbus_pin@0 {
+ allwinner,pins = "PH3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+/ {
reg_ahci_5v: ahci-5v {
compatible = "regulator-fixed";
pinctrl-names = "default";
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
- gpio = <&pio 1 8 0>;
+ gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pio 1 9 0>;
+ gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pio 7 6 0>;
+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pio 7 3 0>;
+ gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
clock-names = "pll_a", "pll_a_out0", "mclk";
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
+ nvidia,mic-det-gpios =
+ <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
};
};
reset-names = "2d";
};
- gr3d@54140000 {
+ gr3d@54180000 {
compatible = "nvidia,tegra20-gr3d";
- reg = <0x54140000 0x00040000>;
+ reg = <0x54180000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_GR3D>;
resets = <&tegra_car 24>;
reset-names = "3d";
status = "disabled";
};
- dsi@542c0000 {
+ dsi@54300000 {
compatible = "nvidia,tegra20-dsi";
- reg = <0x542c0000 0x00040000>;
+ reg = <0x54300000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_DSI>;
resets = <&tegra_car 48>;
reset-names = "dsi";
};
};
- timer@50004600 {
+ timer@50040600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <GIC_PPI 13
/* ALS and Proximity sensor */
isl29028@44 {
- compatible = "isl,isl29028";
+ compatible = "isil,isl29028";
reg = <0x44>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
};
};
- timer@50004600 {
+ timer@50040600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <GIC_PPI 13
regulator-name = "usbh_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_LOW>;
vin-supply = <&sys_5v0_reg>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
- cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
&fec1 {
pinctrl_fec1: fec1grp {
fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKOUT 0x30d2
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
};
-&gpio1 {
+&gpio0 {
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
};
-&gpio2 {
+&gpio1 {
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
};
-&gpio3 {
+&gpio2 {
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
};
-&gpio4 {
+&gpio3 {
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
};
-&gpio5 {
+&gpio4 {
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
};
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
};
+&snvsrtc {
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&src {
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&uart0 {
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
};
&usbphy1 {
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
};
+
+&wdoga5 {
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
- cd-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
usbphy0 = &usbphy0;
usbphy1 = &usbphy1;
};
clock-frequency = <32768>;
};
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&src>;
+ offset = <0x0>;
+ mask = <0x1000>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
- wdog@4003e000 {
+ wdoga5: wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
clocks = <&clks VF610_CLK_WDT>;
#gpio-range-cells = <3>;
};
- gpio1: gpio@40049000 {
+ gpio0: gpio@40049000 {
compatible = "fsl,vf610-gpio";
reg = <0x40049000 0x1000 0x400ff000 0x40>;
gpio-controller;
gpio-ranges = <&iomuxc 0 0 32>;
};
- gpio2: gpio@4004a000 {
+ gpio1: gpio@4004a000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004a000 0x1000 0x400ff040 0x40>;
gpio-controller;
gpio-ranges = <&iomuxc 0 32 32>;
};
- gpio3: gpio@4004b000 {
+ gpio2: gpio@4004b000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004b000 0x1000 0x400ff080 0x40>;
gpio-controller;
gpio-ranges = <&iomuxc 0 64 32>;
};
- gpio4: gpio@4004c000 {
+ gpio3: gpio@4004c000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
gpio-controller;
gpio-ranges = <&iomuxc 0 96 32>;
};
- gpio5: gpio@4004d000 {
+ gpio4: gpio@4004d000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004d000 0x1000 0x400ff100 0x40>;
gpio-controller;
clocks = <&clks VF610_CLK_USBC0>;
status = "disabled";
};
+
+ src: src@4006e000 {
+ compatible = "fsl,vf610-src", "syscon";
+ reg = <0x4006e000 0x1000>;
+ };
};
aips1: aips-bus@40080000 {
status = "disabled";
};
+ snvs0: snvs@400a7000 {
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x400a7000 0x2000>;
+
+ snvsrtc: snvs-rtc-lp@34 {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ reg = <0x34 0x58>;
+ clocks = <&clks VF610_CLK_SNVS>;
+ clock-names = "snvs-rtc";
+ };
+ };
+
uart4: serial@400a9000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400a9000 0x1000>;
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
#define __NR_getrandom (__NR_SYSCALL_BASE+384)
#define __NR_memfd_create (__NR_SYSCALL_BASE+385)
#define __NR_bpf (__NR_SYSCALL_BASE+386)
+#define __NR_execveat (__NR_SYSCALL_BASE+387)
/*
* The following SWIs are ARM private.
CALL(sys_getrandom)
/* 385 */ CALL(sys_memfd_create)
CALL(sys_bpf)
+ CALL(sys_execveat)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
{
return PERF_SAMPLE_REGS_ABI_32;
}
+
+void perf_get_regs_user(struct perf_regs *regs_user,
+ struct pt_regs *regs,
+ struct pt_regs *regs_user_copy)
+{
+ regs_user->regs = task_pt_regs(current);
+ regs_user->abi = perf_reg_abi(current);
+}
seq_printf(m, "model name\t: %s rev %d (%s)\n",
cpu_name, cpuid & 15, elf_platform);
+#if defined(CONFIG_SMP)
+ seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+ per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
+ (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
+#else
+ seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+ loops_per_jiffy / (500000/HZ),
+ (loops_per_jiffy / (5000/HZ)) % 100);
+#endif
/* dump out the processor features */
seq_puts(m, "Features\t: ");
void __init smp_cpus_done(unsigned int max_cpus)
{
+ int cpu;
+ unsigned long bogosum = 0;
+
+ for_each_online_cpu(cpu)
+ bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+
+ printk(KERN_INFO "SMP: Total of %d processors activated "
+ "(%lu.%02lu BogoMIPS).\n",
+ num_online_cpus(),
+ bogosum / (500000/HZ),
+ (bogosum / (5000/HZ)) % 100);
+
hyp_mode_check();
}
obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
-# i.MX6SX reuses i.MX6Q cpuidle driver
-obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6q.o
+obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o
endif
ifdef CONFIG_SND_IMX_SOC
{
struct clk_gate2 *gate = to_clk_gate2(hw);
- if (gate->share_count)
- return !!__clk_get_enable_count(hw->clk);
- else
- return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
+ return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
+}
+
+static void clk_gate2_disable_unused(struct clk_hw *hw)
+{
+ struct clk_gate2 *gate = to_clk_gate2(hw);
+ unsigned long flags = 0;
+ u32 reg;
+
+ spin_lock_irqsave(gate->lock, flags);
+
+ if (!gate->share_count || *gate->share_count == 0) {
+ reg = readl(gate->reg);
+ reg &= ~(3 << gate->bit_idx);
+ writel(reg, gate->reg);
+ }
+
+ spin_unlock_irqrestore(gate->lock, flags);
}
static struct clk_ops clk_gate2_ops = {
.enable = clk_gate2_enable,
.disable = clk_gate2_disable,
+ .disable_unused = clk_gate2_disable_unused,
.is_enabled = clk_gate2_is_enabled,
};
* @base: base address of PLL registers
* @powerup_set: set POWER bit to power up the PLL
* @div_mask: mask of divider bits
+ * @div_shift: shift of divider bits
*
* IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3
* is actually a multiplier, and always sits at bit 0.
void __iomem *base;
bool powerup_set;
u32 div_mask;
+ u32 div_shift;
};
#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
unsigned long parent_rate)
{
struct clk_pllv3 *pll = to_clk_pllv3(hw);
- u32 div = readl_relaxed(pll->base) & pll->div_mask;
+ u32 div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask;
return (div == 1) ? parent_rate * 22 : parent_rate * 20;
}
return -EINVAL;
val = readl_relaxed(pll->base);
- val &= ~pll->div_mask;
- val |= div;
+ val &= ~(pll->div_mask << pll->div_shift);
+ val |= (div << pll->div_shift);
writel_relaxed(val, pll->base);
return clk_pllv3_wait_lock(pll);
case IMX_PLLV3_SYS:
ops = &clk_pllv3_sys_ops;
break;
+ case IMX_PLLV3_USB_VF610:
+ pll->div_shift = 1;
case IMX_PLLV3_USB:
ops = &clk_pllv3_ops;
pll->powerup_set = true;
clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
- clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1);
+ clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x2);
clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
- clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1);
+ clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x2);
clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
clk[VF610_CLK_UART1] = imx_clk_gate2("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8));
clk[VF610_CLK_UART2] = imx_clk_gate2("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9));
clk[VF610_CLK_UART3] = imx_clk_gate2("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10));
+ clk[VF610_CLK_UART4] = imx_clk_gate2("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9));
+ clk[VF610_CLK_UART5] = imx_clk_gate2("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10));
clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6));
clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7));
clk[VF610_CLK_DMAMUX2] = imx_clk_gate2("dmamux2", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(1));
clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2));
+ clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7));
+
imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]);
IMX_PLLV3_GENERIC,
IMX_PLLV3_SYS,
IMX_PLLV3_USB,
+ IMX_PLLV3_USB_VF610,
IMX_PLLV3_AV,
IMX_PLLV3_ENET,
};
unsigned int imx_get_soc_revision(void);
void imx_init_revision_from_anatop(void);
struct device *imx_soc_device_init(void);
+void imx6_enable_rbc(bool enable);
+void imx_gpc_set_arm_power_in_lpm(bool power_off);
+void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw);
+void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw);
enum mxc_cpu_pwr_mode {
WAIT_CLOCKED, /* wfi only */
--- /dev/null
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/module.h>
+#include <asm/cpuidle.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+
+#include "common.h"
+#include "cpuidle.h"
+
+static int imx6sx_idle_finish(unsigned long val)
+{
+ cpu_do_idle();
+
+ return 0;
+}
+
+static int imx6sx_enter_wait(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int index)
+{
+ imx6q_set_lpm(WAIT_UNCLOCKED);
+
+ switch (index) {
+ case 1:
+ cpu_do_idle();
+ break;
+ case 2:
+ imx6_enable_rbc(true);
+ imx_gpc_set_arm_power_in_lpm(true);
+ imx_set_cpu_jump(0, v7_cpu_resume);
+ /* Need to notify there is a cpu pm operation. */
+ cpu_pm_enter();
+ cpu_cluster_pm_enter();
+
+ cpu_suspend(0, imx6sx_idle_finish);
+
+ cpu_cluster_pm_exit();
+ cpu_pm_exit();
+ imx_gpc_set_arm_power_in_lpm(false);
+ imx6_enable_rbc(false);
+ break;
+ default:
+ break;
+ }
+
+ imx6q_set_lpm(WAIT_CLOCKED);
+
+ return index;
+}
+
+static struct cpuidle_driver imx6sx_cpuidle_driver = {
+ .name = "imx6sx_cpuidle",
+ .owner = THIS_MODULE,
+ .states = {
+ /* WFI */
+ ARM_CPUIDLE_WFI_STATE,
+ /* WAIT */
+ {
+ .exit_latency = 50,
+ .target_residency = 75,
+ .flags = CPUIDLE_FLAG_TIMER_STOP,
+ .enter = imx6sx_enter_wait,
+ .name = "WAIT",
+ .desc = "Clock off",
+ },
+ /* WAIT + ARM power off */
+ {
+ /*
+ * ARM gating 31us * 5 + RBC clear 65us
+ * and some margin for SW execution, here set it
+ * to 300us.
+ */
+ .exit_latency = 300,
+ .target_residency = 500,
+ .enter = imx6sx_enter_wait,
+ .name = "LOW-POWER-IDLE",
+ .desc = "ARM power off",
+ },
+ },
+ .state_count = 3,
+ .safe_state_index = 0,
+};
+
+int __init imx6sx_cpuidle_init(void)
+{
+ imx6_enable_rbc(false);
+ /*
+ * set ARM power up/down timing to the fastest,
+ * sw2iso and sw can be set to one 32K cycle = 31us
+ * except for power up sw2iso which need to be
+ * larger than LDO ramp up time.
+ */
+ imx_gpc_set_arm_power_up_timing(2, 1);
+ imx_gpc_set_arm_power_down_timing(1, 1);
+
+ return cpuidle_register(&imx6sx_cpuidle_driver, NULL);
+}
extern int imx5_cpuidle_init(void);
extern int imx6q_cpuidle_init(void);
extern int imx6sl_cpuidle_init(void);
+extern int imx6sx_cpuidle_init(void);
#else
static inline int imx5_cpuidle_init(void)
{
{
return 0;
}
+static inline int imx6sx_cpuidle_init(void)
+{
+ return 0;
+}
#endif
#define GPC_IMR1 0x008
#define GPC_PGC_CPU_PDN 0x2a0
+#define GPC_PGC_CPU_PUPSCR 0x2a4
+#define GPC_PGC_CPU_PDNSCR 0x2a8
+#define GPC_PGC_SW2ISO_SHIFT 0x8
+#define GPC_PGC_SW_SHIFT 0x0
#define IMR_NUM 4
static u32 gpc_wake_irqs[IMR_NUM];
static u32 gpc_saved_imrs[IMR_NUM];
+void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw)
+{
+ writel_relaxed((sw2iso << GPC_PGC_SW2ISO_SHIFT) |
+ (sw << GPC_PGC_SW_SHIFT), gpc_base + GPC_PGC_CPU_PUPSCR);
+}
+
+void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw)
+{
+ writel_relaxed((sw2iso << GPC_PGC_SW2ISO_SHIFT) |
+ (sw << GPC_PGC_SW_SHIFT), gpc_base + GPC_PGC_CPU_PDNSCR);
+}
+
+void imx_gpc_set_arm_power_in_lpm(bool power_off)
+{
+ writel_relaxed(power_off, gpc_base + GPC_PGC_CPU_PDN);
+}
+
void imx_gpc_pre_suspend(bool arm_power_off)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
/* Tell GPC to power off ARM core when suspend */
if (arm_power_off)
- writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+ imx_gpc_set_arm_power_in_lpm(arm_power_off);
for (i = 0; i < IMR_NUM; i++) {
gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
int i;
/* Keep ARM core powered on for other low-power modes */
- writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
+ imx_gpc_set_arm_power_in_lpm(false);
for (i = 0; i < IMR_NUM; i++)
writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
static void __init imx6sx_init_late(void)
{
- imx6q_cpuidle_init();
+ imx6sx_cpuidle_init();
if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
#include <asm/hardware/cache-l2x0.h>
static const char * const vf610_dt_compat[] __initconst = {
+ "fsl,vf500",
+ "fsl,vf510",
+ "fsl,vf600",
"fsl,vf610",
NULL,
};
-DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
+DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF5xx/VF6xx (Device Tree)")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.dt_compat = vf610_dt_compat,
writel_relaxed(val, ccm_base + CGPR);
}
-static void imx6q_enable_rbc(bool enable)
+void imx6_enable_rbc(bool enable)
{
u32 val;
* RBC setting, so we do NOT need to do that here.
*/
if (!imx6_suspend_in_ocram_fn)
- imx6q_enable_rbc(true);
+ imx6_enable_rbc(true);
imx_gpc_pre_suspend(true);
imx_anatop_pre_suspend();
- imx_set_cpu_jump(0, v7_cpu_resume);
/* Zzz ... */
cpu_suspend(0, imx6q_suspend_finish);
if (cpu_is_imx6q() || cpu_is_imx6dl())
imx_smp_prepare();
imx_anatop_post_resume();
imx_gpc_post_resume();
- imx6q_enable_rbc(false);
+ imx6_enable_rbc(false);
imx6q_enable_wb(false);
imx6q_set_int_mem_clk_lpm(true);
imx6q_set_lpm(WAIT_CLOCKED);
static const char units[] = "KMGTPE";
u64 prot = val & pg_level[level].mask;
- if (addr < USER_PGTABLES_CEILING)
- return;
-
if (!st->level) {
st->level = level;
st->current_prot = prot;
pgd_t *pgd = swapper_pg_dir;
struct pg_state st;
unsigned long addr;
- unsigned i, pgdoff = USER_PGTABLES_CEILING / PGDIR_SIZE;
+ unsigned i;
memset(&st, 0, sizeof(st));
st.seq = m;
st.marker = address_markers;
- pgd += pgdoff;
-
- for (i = pgdoff; i < PTRS_PER_PGD; i++, pgd++) {
+ for (i = 0; i < PTRS_PER_PGD; i++, pgd++) {
addr = i * PGDIR_SIZE;
if (!pgd_none(*pgd)) {
walk_pud(&st, pgd, addr);
.start = (unsigned long)_stext,
.end = (unsigned long)__init_begin,
#ifdef CONFIG_ARM_LPAE
- .mask = ~PMD_SECT_RDONLY,
- .prot = PMD_SECT_RDONLY,
+ .mask = ~L_PMD_SECT_RDONLY,
+ .prot = L_PMD_SECT_RDONLY,
#else
.mask = ~(PMD_SECT_APX | PMD_SECT_AP_WRITE),
.prot = PMD_SECT_APX | PMD_SECT_AP_WRITE,
static void __init map_lowmem(void)
{
struct memblock_region *reg;
- unsigned long kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
- unsigned long kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
+ phys_addr_t kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
+ phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
/* Map all the lowmem memory banks. */
for_each_memblock(memory, reg) {
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_HUGETLB=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set
-# CONFIG_HMC_DRV is not set
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_PL061=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VFAT_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
+CONFIG_KEYS=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_ARM64_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
#include <asm/barrier.h>
+#include <linux/bug.h>
#include <linux/init.h>
#include <linux/types.h>
u64 reg_id_aa64pfr0;
u64 reg_id_aa64pfr1;
+ u32 reg_id_dfr0;
u32 reg_id_isar0;
u32 reg_id_isar1;
u32 reg_id_isar2;
u32 reg_id_mmfr3;
u32 reg_id_pfr0;
u32 reg_id_pfr1;
+
+ u32 reg_mvfr0;
+ u32 reg_mvfr1;
+ u32 reg_mvfr2;
};
DECLARE_PER_CPU(struct cpuinfo_arm64, cpu_data);
dev->archdata.dma_ops = ops;
}
-static inline int set_arch_dma_coherent_ops(struct device *dev)
+static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+ struct iommu_ops *iommu, bool coherent)
{
- dev->archdata.dma_coherent = true;
- set_dma_ops(dev, &coherent_swiotlb_dma_ops);
- return 0;
+ dev->archdata.dma_coherent = coherent;
+ if (coherent)
+ set_dma_ops(dev, &coherent_swiotlb_dma_ops);
}
-#define set_arch_dma_coherent_ops set_arch_dma_coherent_ops
+#define arch_setup_dma_ops arch_setup_dma_ops
/* do not use this function in a driver */
static inline bool is_device_dma_coherent(struct device *dev)
#define pfn_pmd(pfn,prot) (__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
#define mk_pmd(page,prot) pfn_pmd(page_to_pfn(page),prot)
-#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
#define pud_write(pud) pte_write(pud_pte(pud))
#define pud_pfn(pud) (((pud_val(pud) & PUD_MASK) & PHYS_MASK) >> PAGE_SHIFT)
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
}
-#define pud_page(pud) pmd_page(pud_pmd(pud))
+#define pud_page(pud) pfn_to_page(__phys_to_pfn(pud_val(pud) & PHYS_MASK))
#endif /* CONFIG_ARM64_PGTABLE_LEVELS > 2 */
return (pud_t *)pgd_page_vaddr(*pgd) + pud_index(addr);
}
+#define pgd_page(pgd) pfn_to_page(__phys_to_pfn(pgd_val(pgd) & PHYS_MASK))
+
#endif /* CONFIG_ARM64_PGTABLE_LEVELS > 3 */
#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd))
#include <asm/fpsimd.h>
#include <asm/hw_breakpoint.h>
+#include <asm/pgtable-hwdef.h>
#include <asm/ptrace.h>
#include <asm/types.h>
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while (0)
-
unsigned long get_wchan(struct task_struct *p);
#define cpu_relax() barrier()
#define __ARM_NR_compat_cacheflush (__ARM_NR_COMPAT_BASE+2)
#define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE+5)
-#define __NR_compat_syscalls 386
+#define __NR_compat_syscalls 387
#endif
#define __ARCH_WANT_SYS_CLONE
* If we have AArch32, we care about 32-bit features for compat. These
* registers should be RES0 otherwise.
*/
+ diff |= CHECK(id_dfr0, boot, cur, cpu);
diff |= CHECK(id_isar0, boot, cur, cpu);
diff |= CHECK(id_isar1, boot, cur, cpu);
diff |= CHECK(id_isar2, boot, cur, cpu);
diff |= CHECK(id_pfr0, boot, cur, cpu);
diff |= CHECK(id_pfr1, boot, cur, cpu);
+ diff |= CHECK(mvfr0, boot, cur, cpu);
+ diff |= CHECK(mvfr1, boot, cur, cpu);
+ diff |= CHECK(mvfr2, boot, cur, cpu);
+
/*
* Mismatched CPU features are a recipe for disaster. Don't even
* pretend to support them.
info->reg_id_aa64pfr0 = read_cpuid(ID_AA64PFR0_EL1);
info->reg_id_aa64pfr1 = read_cpuid(ID_AA64PFR1_EL1);
+ info->reg_id_dfr0 = read_cpuid(ID_DFR0_EL1);
info->reg_id_isar0 = read_cpuid(ID_ISAR0_EL1);
info->reg_id_isar1 = read_cpuid(ID_ISAR1_EL1);
info->reg_id_isar2 = read_cpuid(ID_ISAR2_EL1);
info->reg_id_pfr0 = read_cpuid(ID_PFR0_EL1);
info->reg_id_pfr1 = read_cpuid(ID_PFR1_EL1);
+ info->reg_mvfr0 = read_cpuid(MVFR0_EL1);
+ info->reg_mvfr1 = read_cpuid(MVFR1_EL1);
+ info->reg_mvfr2 = read_cpuid(MVFR2_EL1);
+
cpuinfo_detect_icache_policy(info);
check_local_cpu_errata();
/* boot time idmap_pg_dir is incomplete, so fill in missing parts */
efi_setup_idmap();
+ early_memunmap(memmap.map, memmap.map_end - memmap.map);
}
static int __init remap_region(efi_memory_desc_t *md, void **new)
}
mapsize = memmap.map_end - memmap.map;
- early_memunmap(memmap.map, mapsize);
if (efi_runtime_disabled()) {
pr_info("EFI runtime services will be disabled.\n");
#include <linux/mm.h>
#include <linux/moduleloader.h>
#include <linux/vmalloc.h>
+#include <asm/alternative.h>
#include <asm/insn.h>
#include <asm/sections.h>
else
return PERF_SAMPLE_REGS_ABI_64;
}
+
+void perf_get_regs_user(struct perf_regs *regs_user,
+ struct pt_regs *regs,
+ struct pt_regs *regs_user_copy)
+{
+ regs_user->regs = task_pt_regs(current);
+ regs_user->abi = perf_reg_abi(current);
+}
request_standard_resources();
efi_idmap_init();
+ early_ioremap_reset();
unflatten_device_tree();
#include <asm/cacheflush.h>
#include <asm/cpu_ops.h>
#include <asm/cputype.h>
+#include <asm/io.h>
#include <asm/smp_plat.h>
extern void secondary_holding_pen(void);
#include <asm/debug-monitors.h>
#include <asm/pgtable.h>
#include <asm/memory.h>
+#include <asm/mmu_context.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include <asm/tlbflush.h>
*/
ret = __cpu_suspend_enter(arg, fn);
if (ret == 0) {
- cpu_switch_mm(mm->pgd, mm);
+ /*
+ * We are resuming from reset with TTBR0_EL1 set to the
+ * idmap to enable the MMU; restore the active_mm mappings in
+ * TTBR0_EL1 unless the active_mm == &init_mm, in which case
+ * the thread entered __cpu_suspend with TTBR0_EL1 set to
+ * reserved TTBR0 page tables and should be restored as such.
+ */
+ if (mm == &init_mm)
+ cpu_set_reserved_ttbr0();
+ else
+ cpu_switch_mm(mm->pgd, mm);
+
flush_tlb_all();
/*
*/
#include <linux/device.h>
+#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#define NR_syscalls 318 /* length of syscall table */
+#define NR_syscalls 319 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
#define __NR_getrandom 1339
#define __NR_memfd_create 1340
#define __NR_bpf 1341
+#define __NR_execveat 1342
#endif /* _UAPI_ASM_IA64_UNISTD_H */
}
/* wrapper to silence section mismatch warning */
-int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
+int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu)
{
return _acpi_map_lsapic(handle, physid, pcpu);
}
-EXPORT_SYMBOL(acpi_map_lsapic);
+EXPORT_SYMBOL(acpi_map_cpu);
-int acpi_unmap_lsapic(int cpu)
+int acpi_unmap_cpu(int cpu)
{
ia64_cpu_to_sapicid[cpu] = -1;
set_cpu_present(cpu, false);
return (0);
}
-
-EXPORT_SYMBOL(acpi_unmap_lsapic);
+EXPORT_SYMBOL(acpi_unmap_cpu);
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
#ifdef CONFIG_ACPI_NUMA
data8 sys_getrandom
data8 sys_memfd_create // 1340
data8 sys_bpf
+ data8 sys_execveat
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
cpuinfo.has_div = fcpu_has(cpu, "altr,has-div");
cpuinfo.has_mul = fcpu_has(cpu, "altr,has-mul");
cpuinfo.has_mulx = fcpu_has(cpu, "altr,has-mulx");
+ cpuinfo.mmu = fcpu_has(cpu, "altr,has-mmu");
if (IS_ENABLED(CONFIG_NIOS2_HW_DIV_SUPPORT) && !cpuinfo.has_div)
err_cpu("DIV");
GET_THREAD_INFO r1
ldw r4, TI_PREEMPT_COUNT(r1)
bne r4, r0, restore_all
-
-need_resched:
ldw r4, TI_FLAGS(r1) /* ? Need resched set */
BTBZ r10, r4, TIF_NEED_RESCHED, restore_all
ldw r4, PT_ESTATUS(sp) /* ? Interrupts off */
andi r10, r4, ESTATUS_EPIE
beq r10, r0, restore_all
- movia r4, PREEMPT_ACTIVE
- stw r4, TI_PREEMPT_COUNT(r1)
- rdctl r10, status /* enable intrs again */
- ori r10, r10 ,STATUS_PIE
- wrctl status, r10
- PUSH r1
- call schedule
- POP r1
- mov r4, r0
- stw r4, TI_PREEMPT_COUNT(r1)
- rdctl r10, status /* disable intrs */
- andi r10, r10, %lo(~STATUS_PIE)
- wrctl status, r10
- br need_resched
-#else
- br restore_all
+ call preempt_schedule_irq
#endif
+ br restore_all
/***********************************************************************
* A few syscall wrappers
#endif /*!CONFIG_PA20*/
-/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */
+/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.
+ We don't explicitly expose that "*a" may be written as reload
+ fails to find a register in class R1_REGS when "a" needs to be
+ reloaded when generating 64-bit PIC code. Instead, we clobber
+ memory to indicate to the compiler that the assembly code reads
+ or writes to items other than those listed in the input and output
+ operands. This may pessimize the code somewhat but __ldcw is
+ usually used within code blocks surrounded by memory barriors. */
#define __ldcw(a) ({ \
unsigned __ret; \
- __asm__ __volatile__(__LDCW " 0(%2),%0" \
- : "=r" (__ret), "+m" (*(a)) : "r" (a)); \
+ __asm__ __volatile__(__LDCW " 0(%1),%0" \
+ : "=r" (__ret) : "r" (a) : "memory"); \
__ret; \
})
extern void reserve_crashkernel(void);
extern void machine_kexec_mask_interrupts(void);
+static inline bool kdump_in_progress(void)
+{
+ return crashing_cpu >= 0;
+}
+
#else /* !CONFIG_KEXEC */
static inline void crash_kexec_secondary(struct pt_regs *regs) { }
return 0;
}
+static inline bool kdump_in_progress(void)
+{
+ return false;
+}
+
#endif /* CONFIG_KEXEC */
#endif /* ! __ASSEMBLY__ */
#endif /* __KERNEL__ */
SYSCALL_SPU(getrandom)
SYSCALL_SPU(memfd_create)
SYSCALL_SPU(bpf)
+COMPAT_SYS(execveat)
#include <uapi/asm/unistd.h>
-#define __NR_syscalls 362
+#define __NR_syscalls 363
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
#define __NR_getrandom 359
#define __NR_memfd_create 360
#define __NR_bpf 361
+#define __NR_execveat 362
#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
* using debugger IPI.
*/
- if (crashing_cpu == -1)
+ if (!kdump_in_progress())
kexec_prepare_cpus();
pr_debug("kexec: Starting switchover sequence.\n");
smp_store_cpu_info(cpu);
set_dec(tb_ticks_per_jiffy);
preempt_disable();
+ cpu_callin_map[cpu] = 1;
if (smp_ops->setup_cpu)
smp_ops->setup_cpu(cpu);
notify_cpu_starting(cpu);
set_cpu_online(cpu, true);
- /*
- * CPU must be marked active and online before we signal back to the
- * master, because the scheduler needs to see the cpu_online and
- * cpu_active bits set.
- */
- smp_wmb();
- cpu_callin_map[cpu] = 1;
-
local_irq_enable();
cpu_startup_entry(CPUHP_ONLINE);
#include <asm/trace.h>
#include <asm/firmware.h>
#include <asm/plpar_wrappers.h>
+#include <asm/kexec.h>
#include <asm/fadump.h>
#include "pseries.h"
* out to the user, but at least this will stop us from
* continuing on further and creating an even more
* difficult to debug situation.
+ *
+ * There is a known problem when kdump'ing, if cpus are offline
+ * the above call will fail. Rather than panicking again, keep
+ * going and hope the kdump kernel is also little endian, which
+ * it usually is.
*/
- if (rc)
+ if (rc && !kdump_in_progress())
panic("Could not enable big endian exceptions");
}
#endif
default y
select HAVE_ARCH_AUDITSYSCALL
select HAVE_UID16
+ select HAVE_FUTEX_CMPXCHG if FUTEX
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
select GENERIC_IO
$(obj)/cpustr.h: $(obj)/mkcpustr FORCE
$(call if_changed,cpustr)
endif
+clean-files += cpustr.h
# ---------------------------------------------------------------------------
obj-$(CONFIG_CRYPTO_CRC32C_INTEL) += crc32c-intel.o
obj-$(CONFIG_CRYPTO_SHA1_SSSE3) += sha1-ssse3.o
-obj-$(CONFIG_CRYPTO_SHA1_MB) += sha-mb/
obj-$(CONFIG_CRYPTO_CRC32_PCLMUL) += crc32-pclmul.o
obj-$(CONFIG_CRYPTO_SHA256_SSSE3) += sha256-ssse3.o
obj-$(CONFIG_CRYPTO_SHA512_SSSE3) += sha512-ssse3.o
ifeq ($(avx2_supported),yes)
obj-$(CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64) += camellia-aesni-avx2.o
obj-$(CONFIG_CRYPTO_SERPENT_AVX2_X86_64) += serpent-avx2.o
+ obj-$(CONFIG_CRYPTO_SHA1_MB) += sha-mb/
endif
aes-i586-y := aes-i586-asm_32.o aes_glue.o
.if (klen == KEY_128)
.if (load_keys)
- vmovdqa 3*16(p_keys), xkeyA
+ vmovdqa 3*16(p_keys), xkey4
.endif
.else
vmovdqa 3*16(p_keys), xkeyA
add $(16*by), p_in
.if (klen == KEY_128)
- vmovdqa 4*16(p_keys), xkey4
+ vmovdqa 4*16(p_keys), xkeyB
.else
.if (load_keys)
vmovdqa 4*16(p_keys), xkey4
.set i, 0
.rept by
club XDATA, i
- vaesenc xkeyA, var_xdata, var_xdata /* key 3 */
+ /* key 3 */
+ .if (klen == KEY_128)
+ vaesenc xkey4, var_xdata, var_xdata
+ .else
+ vaesenc xkeyA, var_xdata, var_xdata
+ .endif
.set i, (i +1)
.endr
.set i, 0
.rept by
club XDATA, i
- vaesenc xkey4, var_xdata, var_xdata /* key 4 */
+ /* key 4 */
+ .if (klen == KEY_128)
+ vaesenc xkeyB, var_xdata, var_xdata
+ .else
+ vaesenc xkey4, var_xdata, var_xdata
+ .endif
.set i, (i +1)
.endr
.if (klen == KEY_128)
.if (load_keys)
- vmovdqa 6*16(p_keys), xkeyB
+ vmovdqa 6*16(p_keys), xkey8
.endif
.else
vmovdqa 6*16(p_keys), xkeyB
.set i, 0
.rept by
club XDATA, i
- vaesenc xkeyB, var_xdata, var_xdata /* key 6 */
+ /* key 6 */
+ .if (klen == KEY_128)
+ vaesenc xkey8, var_xdata, var_xdata
+ .else
+ vaesenc xkeyB, var_xdata, var_xdata
+ .endif
.set i, (i +1)
.endr
.if (klen == KEY_128)
- vmovdqa 8*16(p_keys), xkey8
+ vmovdqa 8*16(p_keys), xkeyB
.else
.if (load_keys)
vmovdqa 8*16(p_keys), xkey8
.if (klen == KEY_128)
.if (load_keys)
- vmovdqa 9*16(p_keys), xkeyA
+ vmovdqa 9*16(p_keys), xkey12
.endif
.else
vmovdqa 9*16(p_keys), xkeyA
.set i, 0
.rept by
club XDATA, i
- vaesenc xkey8, var_xdata, var_xdata /* key 8 */
+ /* key 8 */
+ .if (klen == KEY_128)
+ vaesenc xkeyB, var_xdata, var_xdata
+ .else
+ vaesenc xkey8, var_xdata, var_xdata
+ .endif
.set i, (i +1)
.endr
.set i, 0
.rept by
club XDATA, i
- vaesenc xkeyA, var_xdata, var_xdata /* key 9 */
+ /* key 9 */
+ .if (klen == KEY_128)
+ vaesenc xkey12, var_xdata, var_xdata
+ .else
+ vaesenc xkeyA, var_xdata, var_xdata
+ .endif
.set i, (i +1)
.endr
/* main body of aes ctr load */
.macro do_aes_ctrmain key_len
-
cmp $16, num_bytes
jb .Ldo_return2\key_len
/*
* Load per CPU data from GDT. LSL is faster than RDTSCP and
- * works on all CPUs.
+ * works on all CPUs. This is volatile so that it orders
+ * correctly wrt barrier() and to keep gcc from cleverly
+ * hoisting it out of the calling function.
*/
- asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG));
+ asm volatile ("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG));
return p;
}
}
/* wrapper to silence section mismatch warning */
-int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
+int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu)
{
return _acpi_map_lsapic(handle, physid, pcpu);
}
-EXPORT_SYMBOL(acpi_map_lsapic);
+EXPORT_SYMBOL(acpi_map_cpu);
-int acpi_unmap_lsapic(int cpu)
+int acpi_unmap_cpu(int cpu)
{
#ifdef CONFIG_ACPI_NUMA
set_apicid_to_node(per_cpu(x86_cpu_to_apicid, cpu), NUMA_NO_NODE);
return (0);
}
-
-EXPORT_SYMBOL(acpi_unmap_lsapic);
+EXPORT_SYMBOL(acpi_unmap_cpu);
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
$(obj)/capflags.c: $(cpufeature) $(src)/mkcapflags.sh FORCE
$(call if_changed,mkcapflags)
endif
+clean-files += capflags.c
# If the /* comment */ starts with a quote string, grab that.
VALUE="$(echo "$i" | sed -n 's@.*/\* *\("[^"]*"\).*\*/@\1@p')"
[ -z "$VALUE" ] && VALUE="\"$NAME\""
- [ "$VALUE" == '""' ] && continue
+ [ "$VALUE" = '""' ] && continue
# Name is uppercase, VALUE is all lowercase
VALUE="$(echo "$VALUE" | tr A-Z a-z)"
#define UNCORE_PCI_DEV_TYPE(data) ((data >> 8) & 0xff)
#define UNCORE_PCI_DEV_IDX(data) (data & 0xff)
#define UNCORE_EXTRA_PCI_DEV 0xff
-#define UNCORE_EXTRA_PCI_DEV_MAX 2
+#define UNCORE_EXTRA_PCI_DEV_MAX 3
/* support up to 8 sockets */
#define UNCORE_SOCKET_MAX 8
enum {
SNBEP_PCI_QPI_PORT0_FILTER,
SNBEP_PCI_QPI_PORT1_FILTER,
+ HSWEP_PCI_PCU_3,
};
static int snbep_qpi_hw_config(struct intel_uncore_box *box, struct perf_event *event)
{
if (hswep_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores)
hswep_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores;
+
+ /* Detect 6-8 core systems with only two SBOXes */
+ if (uncore_extra_pci_dev[0][HSWEP_PCI_PCU_3]) {
+ u32 capid4;
+
+ pci_read_config_dword(uncore_extra_pci_dev[0][HSWEP_PCI_PCU_3],
+ 0x94, &capid4);
+ if (((capid4 >> 6) & 0x3) == 0)
+ hswep_uncore_sbox.num_boxes = 2;
+ }
+
uncore_msr_uncores = hswep_msr_uncores;
}
.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
SNBEP_PCI_QPI_PORT1_FILTER),
},
+ { /* PCU.3 (for Capability registers) */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2fc0),
+ .driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
+ HSWEP_PCI_PCU_3),
+ },
{ /* end: all zeroes */ }
};
{
return PERF_SAMPLE_REGS_ABI_32;
}
+
+void perf_get_regs_user(struct perf_regs *regs_user,
+ struct pt_regs *regs,
+ struct pt_regs *regs_user_copy)
+{
+ regs_user->regs = task_pt_regs(current);
+ regs_user->abi = perf_reg_abi(current);
+}
#else /* CONFIG_X86_64 */
#define REG_NOSUPPORT ((1ULL << PERF_REG_X86_DS) | \
(1ULL << PERF_REG_X86_ES) | \
else
return PERF_SAMPLE_REGS_ABI_64;
}
+
+void perf_get_regs_user(struct perf_regs *regs_user,
+ struct pt_regs *regs,
+ struct pt_regs *regs_user_copy)
+{
+ struct pt_regs *user_regs = task_pt_regs(current);
+
+ /*
+ * If we're in an NMI that interrupted task_pt_regs setup, then
+ * we can't sample user regs at all. This check isn't really
+ * sufficient, though, as we could be in an NMI inside an interrupt
+ * that happened during task_pt_regs setup.
+ */
+ if (regs->sp > (unsigned long)&user_regs->r11 &&
+ regs->sp <= (unsigned long)(user_regs + 1)) {
+ regs_user->abi = PERF_SAMPLE_REGS_ABI_NONE;
+ regs_user->regs = NULL;
+ return;
+ }
+
+ /*
+ * RIP, flags, and the argument registers are usually saved.
+ * orig_ax is probably okay, too.
+ */
+ regs_user_copy->ip = user_regs->ip;
+ regs_user_copy->cx = user_regs->cx;
+ regs_user_copy->dx = user_regs->dx;
+ regs_user_copy->si = user_regs->si;
+ regs_user_copy->di = user_regs->di;
+ regs_user_copy->r8 = user_regs->r8;
+ regs_user_copy->r9 = user_regs->r9;
+ regs_user_copy->r10 = user_regs->r10;
+ regs_user_copy->r11 = user_regs->r11;
+ regs_user_copy->orig_ax = user_regs->orig_ax;
+ regs_user_copy->flags = user_regs->flags;
+
+ /*
+ * Don't even try to report the "rest" regs.
+ */
+ regs_user_copy->bx = -1;
+ regs_user_copy->bp = -1;
+ regs_user_copy->r12 = -1;
+ regs_user_copy->r13 = -1;
+ regs_user_copy->r14 = -1;
+ regs_user_copy->r15 = -1;
+
+ /*
+ * For this to be at all useful, we need a reasonable guess for
+ * sp and the ABI. Be careful: we're in NMI context, and we're
+ * considering current to be the current task, so we should
+ * be careful not to look at any other percpu variables that might
+ * change during context switches.
+ */
+ if (IS_ENABLED(CONFIG_IA32_EMULATION) &&
+ task_thread_info(current)->status & TS_COMPAT) {
+ /* Easy case: we're in a compat syscall. */
+ regs_user->abi = PERF_SAMPLE_REGS_ABI_32;
+ regs_user_copy->sp = user_regs->sp;
+ regs_user_copy->cs = user_regs->cs;
+ regs_user_copy->ss = user_regs->ss;
+ } else if (user_regs->orig_ax != -1) {
+ /*
+ * We're probably in a 64-bit syscall.
+ * Warning: this code is severely racy. At least it's better
+ * than just blindly copying user_regs.
+ */
+ regs_user->abi = PERF_SAMPLE_REGS_ABI_64;
+ regs_user_copy->sp = this_cpu_read(old_rsp);
+ regs_user_copy->cs = __USER_CS;
+ regs_user_copy->ss = __USER_DS;
+ regs_user_copy->cx = -1; /* usually contains garbage */
+ } else {
+ /* We're probably in an interrupt or exception. */
+ regs_user->abi = user_64bit_mode(user_regs) ?
+ PERF_SAMPLE_REGS_ABI_64 : PERF_SAMPLE_REGS_ABI_32;
+ regs_user_copy->sp = user_regs->sp;
+ regs_user_copy->cs = user_regs->cs;
+ regs_user_copy->ss = user_regs->ss;
+ }
+
+ regs_user->regs = regs_user_copy;
+}
#endif /* CONFIG_X86_32 */
* zap all shadow pages.
*/
if (unlikely(kvm_current_mmio_generation(kvm) == 0)) {
- printk_ratelimited(KERN_INFO "kvm: zapping shadow pages for mmio generation wraparound\n");
+ printk_ratelimited(KERN_DEBUG "kvm: zapping shadow pages for mmio generation wraparound\n");
kvm_mmu_invalidate_zap_all_pages(kvm);
}
}
memset(vmx_msr_bitmap_legacy, 0xff, PAGE_SIZE);
memset(vmx_msr_bitmap_longmode, 0xff, PAGE_SIZE);
- vmx_disable_intercept_for_msr(MSR_FS_BASE, false);
- vmx_disable_intercept_for_msr(MSR_GS_BASE, false);
- vmx_disable_intercept_for_msr(MSR_KERNEL_GS_BASE, true);
- vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_CS, false);
- vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_ESP, false);
- vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_EIP, false);
- vmx_disable_intercept_for_msr(MSR_IA32_BNDCFGS, true);
-
- memcpy(vmx_msr_bitmap_legacy_x2apic,
- vmx_msr_bitmap_legacy, PAGE_SIZE);
- memcpy(vmx_msr_bitmap_longmode_x2apic,
- vmx_msr_bitmap_longmode, PAGE_SIZE);
-
- if (enable_apicv) {
- for (msr = 0x800; msr <= 0x8ff; msr++)
- vmx_disable_intercept_msr_read_x2apic(msr);
-
- /* According SDM, in x2apic mode, the whole id reg is used.
- * But in KVM, it only use the highest eight bits. Need to
- * intercept it */
- vmx_enable_intercept_msr_read_x2apic(0x802);
- /* TMCCT */
- vmx_enable_intercept_msr_read_x2apic(0x839);
- /* TPR */
- vmx_disable_intercept_msr_write_x2apic(0x808);
- /* EOI */
- vmx_disable_intercept_msr_write_x2apic(0x80b);
- /* SELF-IPI */
- vmx_disable_intercept_msr_write_x2apic(0x83f);
- }
-
- if (enable_ept) {
- kvm_mmu_set_mask_ptes(0ull,
- (enable_ept_ad_bits) ? VMX_EPT_ACCESS_BIT : 0ull,
- (enable_ept_ad_bits) ? VMX_EPT_DIRTY_BIT : 0ull,
- 0ull, VMX_EPT_EXECUTABLE_MASK);
- ept_set_mmio_spte_mask();
- kvm_enable_tdp();
- } else
- kvm_disable_tdp();
-
- update_ple_window_actual_max();
-
if (setup_vmcs_config(&vmcs_config) < 0) {
r = -EIO;
goto out7;
- }
+ }
if (boot_cpu_has(X86_FEATURE_NX))
kvm_enable_efer_bits(EFER_NX);
if (nested)
nested_vmx_setup_ctls_msrs();
+ vmx_disable_intercept_for_msr(MSR_FS_BASE, false);
+ vmx_disable_intercept_for_msr(MSR_GS_BASE, false);
+ vmx_disable_intercept_for_msr(MSR_KERNEL_GS_BASE, true);
+ vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_CS, false);
+ vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_ESP, false);
+ vmx_disable_intercept_for_msr(MSR_IA32_SYSENTER_EIP, false);
+ vmx_disable_intercept_for_msr(MSR_IA32_BNDCFGS, true);
+
+ memcpy(vmx_msr_bitmap_legacy_x2apic,
+ vmx_msr_bitmap_legacy, PAGE_SIZE);
+ memcpy(vmx_msr_bitmap_longmode_x2apic,
+ vmx_msr_bitmap_longmode, PAGE_SIZE);
+
+ if (enable_apicv) {
+ for (msr = 0x800; msr <= 0x8ff; msr++)
+ vmx_disable_intercept_msr_read_x2apic(msr);
+
+ /* According SDM, in x2apic mode, the whole id reg is used.
+ * But in KVM, it only use the highest eight bits. Need to
+ * intercept it */
+ vmx_enable_intercept_msr_read_x2apic(0x802);
+ /* TMCCT */
+ vmx_enable_intercept_msr_read_x2apic(0x839);
+ /* TPR */
+ vmx_disable_intercept_msr_write_x2apic(0x808);
+ /* EOI */
+ vmx_disable_intercept_msr_write_x2apic(0x80b);
+ /* SELF-IPI */
+ vmx_disable_intercept_msr_write_x2apic(0x83f);
+ }
+
+ if (enable_ept) {
+ kvm_mmu_set_mask_ptes(0ull,
+ (enable_ept_ad_bits) ? VMX_EPT_ACCESS_BIT : 0ull,
+ (enable_ept_ad_bits) ? VMX_EPT_DIRTY_BIT : 0ull,
+ 0ull, VMX_EPT_EXECUTABLE_MASK);
+ ept_set_mmio_spte_mask();
+ kvm_enable_tdp();
+ } else
+ kvm_disable_tdp();
+
+ update_ple_window_actual_max();
+
return alloc_kvm_area();
out7:
/* Verify next sizeof(t) bytes can be on the same instruction */
#define validate_next(t, insn, n) \
- ((insn)->next_byte + sizeof(t) + n < (insn)->end_kaddr)
+ ((insn)->next_byte + sizeof(t) + n <= (insn)->end_kaddr)
#define __get_next(t, insn) \
({ t r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); r; })
static unsigned long __init get_new_step_size(unsigned long step_size)
{
/*
- * Explain why we shift by 5 and why we don't have to worry about
- * 'step_size << 5' overflowing:
- *
- * initial mapped size is PMD_SIZE (2M).
+ * Initial mapped size is PMD_SIZE (2M).
* We can not set step_size to be PUD_SIZE (1G) yet.
* In worse case, when we cross the 1G boundary, and
* PG_LEVEL_2M is not set, we will need 1+1+512 pages (2M + 8k)
- * to map 1G range with PTE. Use 5 as shift for now.
+ * to map 1G range with PTE. Hence we use one less than the
+ * difference of page table level shifts.
*
- * Don't need to worry about overflow, on 32bit, when step_size
- * is 0, round_down() returns 0 for start, and that turns it
- * into 0x100000000ULL.
+ * Don't need to worry about overflow in the top-down case, on 32bit,
+ * when step_size is 0, round_down() returns 0 for start, and that
+ * turns it into 0x100000000ULL.
+ * In the bottom-up case, round_up(x, 0) returns 0 though too, which
+ * needs to be taken into consideration by the code below.
*/
- return step_size << 5;
+ return step_size << (PMD_SHIFT - PAGE_SHIFT - 1);
}
/**
unsigned long step_size;
unsigned long addr;
unsigned long mapped_ram_size = 0;
- unsigned long new_mapped_ram_size;
/* xen has big range in reserved near end of ram, skip it at first.*/
addr = memblock_find_in_range(map_start, map_end, PMD_SIZE, PMD_SIZE);
start = map_start;
} else
start = map_start;
- new_mapped_ram_size = init_range_memory_mapping(start,
+ mapped_ram_size += init_range_memory_mapping(start,
last_start);
last_start = start;
min_pfn_mapped = last_start >> PAGE_SHIFT;
- /* only increase step_size after big range get mapped */
- if (new_mapped_ram_size > mapped_ram_size)
+ if (mapped_ram_size >= step_size)
step_size = get_new_step_size(step_size);
- mapped_ram_size += new_mapped_ram_size;
}
if (real_end < map_end)
static void __init memory_map_bottom_up(unsigned long map_start,
unsigned long map_end)
{
- unsigned long next, new_mapped_ram_size, start;
+ unsigned long next, start;
unsigned long mapped_ram_size = 0;
/* step_size need to be small so pgt_buf from BRK could cover it */
unsigned long step_size = PMD_SIZE;
* for page table.
*/
while (start < map_end) {
- if (map_end - start > step_size) {
+ if (step_size && map_end - start > step_size) {
next = round_up(start + 1, step_size);
if (next > map_end)
next = map_end;
- } else
+ } else {
next = map_end;
+ }
- new_mapped_ram_size = init_range_memory_mapping(start, next);
+ mapped_ram_size += init_range_memory_mapping(start, next);
start = next;
- if (new_mapped_ram_size > mapped_ram_size)
+ if (mapped_ram_size >= step_size)
step_size = get_new_step_size(step_size);
- mapped_ram_size += new_mapped_ram_size;
}
}
extern asmlinkage void sys_ni_syscall(void);
-const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
+const sys_call_ptr_t sys_call_table[] ____cacheline_aligned = {
/*
* Smells like a compiler bug -- it doesn't work
* when the & below is removed.
extern void sys_ni_syscall(void);
-const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
+const sys_call_ptr_t sys_call_table[] ____cacheline_aligned = {
/*
* Smells like a compiler bug -- it doesn't work
* when the & below is removed.
struct linux_binprm;
-/* Put the vdso above the (randomized) stack with another randomized offset.
- This way there is no hole in the middle of address space.
- To save memory make sure it is still in the same PTE as the stack top.
- This doesn't give that many random bits.
-
- Only used for the 64-bit and x32 vdsos. */
+/*
+ * Put the vdso above the (randomized) stack with another randomized
+ * offset. This way there is no hole in the middle of address space.
+ * To save memory make sure it is still in the same PTE as the stack
+ * top. This doesn't give that many random bits.
+ *
+ * Note that this algorithm is imperfect: the distribution of the vdso
+ * start address within a PMD is biased toward the end.
+ *
+ * Only used for the 64-bit and x32 vdsos.
+ */
static unsigned long vdso_addr(unsigned long start, unsigned len)
{
#ifdef CONFIG_X86_32
#else
unsigned long addr, end;
unsigned offset;
- end = (start + PMD_SIZE - 1) & PMD_MASK;
+
+ /*
+ * Round up the start address. It can start out unaligned as a result
+ * of stack start randomization.
+ */
+ start = PAGE_ALIGN(start);
+
+ /* Round the lowest possible end address up to a PMD boundary. */
+ end = (start + len + PMD_SIZE - 1) & PMD_MASK;
if (end >= TASK_SIZE_MAX)
end = TASK_SIZE_MAX;
end -= len;
- /* This loses some more bits than a modulo, but is cheaper */
- offset = get_random_int() & (PTRS_PER_PTE - 1);
- addr = start + (offset << PAGE_SHIFT);
- if (addr >= end)
- addr = end;
+
+ if (end > start) {
+ offset = get_random_int() % (((end - start) >> PAGE_SHIFT) + 1);
+ addr = start + (offset << PAGE_SHIFT);
+ } else {
+ addr = start;
+ }
/*
- * page-align it here so that get_unmapped_area doesn't
- * align it wrongfully again to the next page. addr can come in 4K
- * unaligned here as a result of stack start randomization.
+ * Forcibly align the final address in case we have a hardware
+ * issue that requires alignment for performance reasons.
*/
- addr = PAGE_ALIGN(addr);
addr = align_vdso_addr(addr);
return addr;
{
struct af_alg_completion *completion = req->data;
+ if (err == -EINPROGRESS)
+ return;
+
completion->err = err;
complete(&completion->completion);
}
obj-y += tty/
obj-y += char/
-# gpu/ comes after char for AGP vs DRM startup
+# iommu/ comes before gpu as gpu are using iommu controllers
+obj-$(CONFIG_IOMMU_SUPPORT) += iommu/
+
+# gpu/ comes after char for AGP vs DRM startup and after iommu
obj-y += gpu/
obj-$(CONFIG_CONNECTOR) += connector/
obj-$(CONFIG_MAILBOX) += mailbox/
obj-$(CONFIG_HWSPINLOCK) += hwspinlock/
-obj-$(CONFIG_IOMMU_SUPPORT) += iommu/
obj-$(CONFIG_REMOTEPROC) += remoteproc/
obj-$(CONFIG_RPMSG) += rpmsg/
acpi_status status;
int ret;
- if (pr->apic_id == -1)
+ if (pr->phys_id == -1)
return -ENODEV;
status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta);
cpu_maps_update_begin();
cpu_hotplug_begin();
- ret = acpi_map_lsapic(pr->handle, pr->apic_id, &pr->id);
+ ret = acpi_map_cpu(pr->handle, pr->phys_id, &pr->id);
if (ret)
goto out;
ret = arch_register_cpu(pr->id);
if (ret) {
- acpi_unmap_lsapic(pr->id);
+ acpi_unmap_cpu(pr->id);
goto out;
}
union acpi_object object = { 0 };
struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
struct acpi_processor *pr = acpi_driver_data(device);
- int apic_id, cpu_index, device_declaration = 0;
+ int phys_id, cpu_index, device_declaration = 0;
acpi_status status = AE_OK;
static int cpu0_initialized;
unsigned long long value;
pr->acpi_id = value;
}
- apic_id = acpi_get_apicid(pr->handle, device_declaration, pr->acpi_id);
- if (apic_id < 0)
- acpi_handle_debug(pr->handle, "failed to get CPU APIC ID.\n");
- pr->apic_id = apic_id;
+ phys_id = acpi_get_phys_id(pr->handle, device_declaration, pr->acpi_id);
+ if (phys_id < 0)
+ acpi_handle_debug(pr->handle, "failed to get CPU physical ID.\n");
+ pr->phys_id = phys_id;
- cpu_index = acpi_map_cpuid(pr->apic_id, pr->acpi_id);
+ cpu_index = acpi_map_cpuid(pr->phys_id, pr->acpi_id);
if (!cpu0_initialized && !acpi_has_cpu_in_madt()) {
cpu0_initialized = 1;
- /* Handle UP system running SMP kernel, with no LAPIC in MADT */
+ /*
+ * Handle UP system running SMP kernel, with no CPU
+ * entry in MADT
+ */
if ((cpu_index == -1) && (num_online_cpus() == 1))
cpu_index = 0;
}
/* Remove the CPU. */
arch_unregister_cpu(pr->id);
- acpi_unmap_lsapic(pr->id);
+ acpi_unmap_cpu(pr->id);
cpu_hotplug_done();
cpu_maps_update_done();
device->power.state = ACPI_STATE_UNKNOWN;
if (!acpi_device_is_present(device))
- return 0;
+ return -ENXIO;
result = acpi_device_get_power(device, &state);
if (result)
unsigned long madt_end, entry;
static struct acpi_table_madt *madt;
static int read_madt;
- int apic_id = -1;
+ int phys_id = -1; /* CPU hardware ID */
if (!read_madt) {
if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
}
if (!madt)
- return apic_id;
+ return phys_id;
entry = (unsigned long)madt;
madt_end = entry + madt->header.length;
struct acpi_subtable_header *header =
(struct acpi_subtable_header *)entry;
if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
- if (!map_lapic_id(header, acpi_id, &apic_id))
+ if (!map_lapic_id(header, acpi_id, &phys_id))
break;
} else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) {
- if (!map_x2apic_id(header, type, acpi_id, &apic_id))
+ if (!map_x2apic_id(header, type, acpi_id, &phys_id))
break;
} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
- if (!map_lsapic_id(header, type, acpi_id, &apic_id))
+ if (!map_lsapic_id(header, type, acpi_id, &phys_id))
break;
}
entry += header->length;
}
- return apic_id;
+ return phys_id;
}
static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
struct acpi_subtable_header *header;
- int apic_id = -1;
+ int phys_id = -1;
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
goto exit;
header = (struct acpi_subtable_header *)obj->buffer.pointer;
if (header->type == ACPI_MADT_TYPE_LOCAL_APIC)
- map_lapic_id(header, acpi_id, &apic_id);
+ map_lapic_id(header, acpi_id, &phys_id);
else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC)
- map_lsapic_id(header, type, acpi_id, &apic_id);
+ map_lsapic_id(header, type, acpi_id, &phys_id);
else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC)
- map_x2apic_id(header, type, acpi_id, &apic_id);
+ map_x2apic_id(header, type, acpi_id, &phys_id);
exit:
kfree(buffer.pointer);
- return apic_id;
+ return phys_id;
}
-int acpi_get_apicid(acpi_handle handle, int type, u32 acpi_id)
+int acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id)
{
- int apic_id;
+ int phys_id;
- apic_id = map_mat_entry(handle, type, acpi_id);
- if (apic_id == -1)
- apic_id = map_madt_entry(type, acpi_id);
+ phys_id = map_mat_entry(handle, type, acpi_id);
+ if (phys_id == -1)
+ phys_id = map_madt_entry(type, acpi_id);
- return apic_id;
+ return phys_id;
}
-int acpi_map_cpuid(int apic_id, u32 acpi_id)
+int acpi_map_cpuid(int phys_id, u32 acpi_id)
{
#ifdef CONFIG_SMP
int i;
#endif
- if (apic_id == -1) {
+ if (phys_id == -1) {
/*
* On UP processor, there is no _MAT or MADT table.
- * So above apic_id is always set to -1.
+ * So above phys_id is always set to -1.
*
* BIOS may define multiple CPU handles even for UP processor.
* For example,
* Processor (CPU3, 0x03, 0x00000410, 0x06) {}
* }
*
- * Ignores apic_id and always returns 0 for the processor
+ * Ignores phys_id and always returns 0 for the processor
* handle with acpi id 0 if nr_cpu_ids is 1.
* This should be the case if SMP tables are not found.
* Return -1 for other CPU's handle.
if (nr_cpu_ids <= 1 && acpi_id == 0)
return acpi_id;
else
- return apic_id;
+ return phys_id;
}
#ifdef CONFIG_SMP
for_each_possible_cpu(i) {
- if (cpu_physical_id(i) == apic_id)
+ if (cpu_physical_id(i) == phys_id)
return i;
}
#else
/* In UP kernel, only processor 0 is valid */
- if (apic_id == 0)
- return apic_id;
+ if (phys_id == 0)
+ return phys_id;
#endif
return -1;
}
int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
{
- int apic_id;
+ int phys_id;
- apic_id = acpi_get_apicid(handle, type, acpi_id);
+ phys_id = acpi_get_phys_id(handle, type, acpi_id);
- return acpi_map_cpuid(apic_id, acpi_id);
+ return acpi_map_cpuid(phys_id, acpi_id);
}
EXPORT_SYMBOL_GPL(acpi_get_cpuid);
state->flags = 0;
switch (cx->type) {
case ACPI_STATE_C1:
- if (cx->entry_method != ACPI_CSTATE_FFH)
- state->flags |= CPUIDLE_FLAG_TIME_INVALID;
state->enter = acpi_idle_enter_c1;
state->enter_dead = acpi_idle_play_dead;
if (device->wakeup.flags.valid)
acpi_power_resources_list_free(&device->wakeup.resources);
- if (!device->flags.power_manageable)
+ if (!device->power.flags.power_resources)
return;
for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
device->power.flags.power_resources)
device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible = 1;
- if (acpi_bus_init_power(device)) {
- acpi_free_power_resources_lists(device);
+ if (acpi_bus_init_power(device))
device->flags.power_manageable = 0;
- }
}
static void acpi_bus_get_flags(struct acpi_device *device)
/* Skip devices that are not present. */
if (!acpi_device_is_present(device)) {
device->flags.visited = false;
+ device->flags.power_manageable = 0;
return;
}
if (device->handler)
goto ok;
if (!device->flags.initialized) {
- acpi_bus_update_power(device, NULL);
+ device->flags.power_manageable =
+ device->power.states[ACPI_STATE_D0].flags.valid;
+ if (acpi_bus_init_power(device))
+ device->flags.power_manageable = 0;
+
device->flags.initialized = true;
}
device->flags.visited = false;
DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY 15 Notebook PC"),
},
},
+
+ {
+ .callback = video_disable_native_backlight,
+ .ident = "SAMSUNG 870Z5E/880Z5E/680Z5E",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "870Z5E/880Z5E/680Z5E"),
+ },
+ },
+ {
+ .callback = video_disable_native_backlight,
+ .ident = "SAMSUNG 370R4E/370R4V/370R5E/3570RE/370R5V",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "370R4E/370R4V/370R5E/3570RE/370R5V"),
+ },
+ },
+
+ {
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=1163574 */
+ .callback = video_disable_native_backlight,
+ .ident = "Dell XPS15 L521X",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS L521X"),
+ },
+ },
{}
};
* Returns a valid pointer to struct generic_pm_domain on success or ERR_PTR()
* on failure.
*/
-static struct generic_pm_domain *of_genpd_get_from_provider(
+struct generic_pm_domain *of_genpd_get_from_provider(
struct of_phandle_args *genpdspec)
{
struct generic_pm_domain *genpd = ERR_PTR(-ENOENT);
return genpd;
}
+EXPORT_SYMBOL_GPL(of_genpd_get_from_provider);
/**
* genpd_dev_pm_detach - Detach a device from its PM domain.
/* Lock to allow exclusive modification to the device and opp lists */
static DEFINE_MUTEX(dev_opp_list_lock);
+#define opp_rcu_lockdep_assert() \
+do { \
+ rcu_lockdep_assert(rcu_read_lock_held() || \
+ lockdep_is_held(&dev_opp_list_lock), \
+ "Missing rcu_read_lock() or " \
+ "dev_opp_list_lock protection"); \
+} while (0)
+
/**
* find_device_opp() - find device_opp struct using device pointer
* @dev: device pointer used to lookup device OPPs
* This function returns the number of available opps if there are any,
* else returns 0 if none or the corresponding error value.
*
- * Locking: This function must be called under rcu_read_lock(). This function
- * internally references two RCU protected structures: device_opp and opp which
- * are safe as long as we are under a common RCU locked section.
+ * Locking: This function takes rcu_read_lock().
*/
int dev_pm_opp_get_opp_count(struct device *dev)
{
struct dev_pm_opp *temp_opp;
int count = 0;
+ rcu_read_lock();
+
dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp)) {
- int r = PTR_ERR(dev_opp);
- dev_err(dev, "%s: device OPP not found (%d)\n", __func__, r);
- return r;
+ count = PTR_ERR(dev_opp);
+ dev_err(dev, "%s: device OPP not found (%d)\n",
+ __func__, count);
+ goto out_unlock;
}
list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) {
count++;
}
+out_unlock:
+ rcu_read_unlock();
return count;
}
EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count);
struct device_opp *dev_opp;
struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
+ opp_rcu_lockdep_assert();
+
dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp)) {
int r = PTR_ERR(dev_opp);
struct device_opp *dev_opp;
struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
+ opp_rcu_lockdep_assert();
+
if (!dev || !freq) {
dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
return ERR_PTR(-EINVAL);
struct device_opp *dev_opp;
struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
+ opp_rcu_lockdep_assert();
+
if (!dev || !freq) {
dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
return ERR_PTR(-EINVAL);
/* Check for existing list for 'dev' */
dev_opp = find_device_opp(dev);
- if (WARN(IS_ERR(dev_opp), "%s: dev_opp: %ld\n", dev_name(dev),
- PTR_ERR(dev_opp)))
+ if (IS_ERR(dev_opp)) {
+ int error = PTR_ERR(dev_opp);
+ if (error != -ENODEV)
+ WARN(1, "%s: dev_opp: %d\n",
+ IS_ERR_OR_NULL(dev) ?
+ "Invalid device" : dev_name(dev),
+ error);
return;
+ }
/* Hold our list modification lock here */
mutex_lock(&dev_opp_list_lock);
module_init(agp_ali_init);
module_exit(agp_ali_cleanup);
-MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_AUTHOR("Dave Jones");
MODULE_LICENSE("GPL and additional rights");
module_init(agp_amd64_mod_init);
module_exit(agp_amd64_cleanup);
-MODULE_AUTHOR("Dave Jones <davej@redhat.com>, Andi Kleen");
+MODULE_AUTHOR("Dave Jones, Andi Kleen");
module_param(agp_try_unsupported, bool, 0);
MODULE_LICENSE("GPL");
module_init(agp_ati_init);
module_exit(agp_ati_cleanup);
-MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_AUTHOR("Dave Jones");
MODULE_LICENSE("GPL and additional rights");
__setup("agp=", agp_setup);
#endif
-MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_AUTHOR("Dave Jones, Jeff Hartmann");
MODULE_DESCRIPTION("AGP GART driver");
MODULE_LICENSE("GPL and additional rights");
MODULE_ALIAS_MISCDEV(AGPGART_MINOR);
module_init(agp_intel_init);
module_exit(agp_intel_cleanup);
-MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_AUTHOR("Dave Jones, Various @Intel");
MODULE_LICENSE("GPL and additional rights");
}
EXPORT_SYMBOL(intel_gmch_remove);
-MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_AUTHOR("Dave Jones, Various @Intel");
MODULE_LICENSE("GPL and additional rights");
/*
* Nvidia AGPGART routines.
* Based upon a 2.4 agpgart diff by the folks from NVIDIA, and hacked up
- * to work in 2.5 by Dave Jones <davej@redhat.com>
+ * to work in 2.5 by Dave Jones.
*/
#include <linux/module.h>
module_exit(agp_via_cleanup);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_AUTHOR("Dave Jones");
int guid_set;
char name[16];
struct kref usecount;
-
- /* bmc device attributes */
- struct device_attribute device_id_attr;
- struct device_attribute provides_dev_sdrs_attr;
- struct device_attribute revision_attr;
- struct device_attribute firmware_rev_attr;
- struct device_attribute version_attr;
- struct device_attribute add_dev_support_attr;
- struct device_attribute manufacturer_id_attr;
- struct device_attribute product_id_attr;
- struct device_attribute guid_attr;
- struct device_attribute aux_firmware_rev_attr;
};
#define to_bmc_device(x) container_of((x), struct bmc_device, pdev.dev)
return snprintf(buf, 10, "%u\n", bmc->id.device_id);
}
-DEVICE_ATTR(device_id, S_IRUGO, device_id_show, NULL);
+static DEVICE_ATTR(device_id, S_IRUGO, device_id_show, NULL);
static ssize_t provides_device_sdrs_show(struct device *dev,
struct device_attribute *attr,
return snprintf(buf, 10, "%u\n",
(bmc->id.device_revision & 0x80) >> 7);
}
-DEVICE_ATTR(provides_device_sdrs, S_IRUGO, provides_device_sdrs_show, NULL);
+static DEVICE_ATTR(provides_device_sdrs, S_IRUGO, provides_device_sdrs_show,
+ NULL);
static ssize_t revision_show(struct device *dev, struct device_attribute *attr,
char *buf)
return snprintf(buf, 20, "%u\n",
bmc->id.device_revision & 0x0F);
}
-DEVICE_ATTR(revision, S_IRUGO, revision_show, NULL);
+static DEVICE_ATTR(revision, S_IRUGO, revision_show, NULL);
static ssize_t firmware_revision_show(struct device *dev,
struct device_attribute *attr,
return snprintf(buf, 20, "%u.%x\n", bmc->id.firmware_revision_1,
bmc->id.firmware_revision_2);
}
-DEVICE_ATTR(firmware_revision, S_IRUGO, firmware_revision_show, NULL);
+static DEVICE_ATTR(firmware_revision, S_IRUGO, firmware_revision_show, NULL);
static ssize_t ipmi_version_show(struct device *dev,
struct device_attribute *attr,
ipmi_version_major(&bmc->id),
ipmi_version_minor(&bmc->id));
}
-DEVICE_ATTR(ipmi_version, S_IRUGO, ipmi_version_show, NULL);
+static DEVICE_ATTR(ipmi_version, S_IRUGO, ipmi_version_show, NULL);
static ssize_t add_dev_support_show(struct device *dev,
struct device_attribute *attr,
return snprintf(buf, 10, "0x%02x\n",
bmc->id.additional_device_support);
}
-DEVICE_ATTR(additional_device_support, S_IRUGO, add_dev_support_show, NULL);
+static DEVICE_ATTR(additional_device_support, S_IRUGO, add_dev_support_show,
+ NULL);
static ssize_t manufacturer_id_show(struct device *dev,
struct device_attribute *attr,
return snprintf(buf, 20, "0x%6.6x\n", bmc->id.manufacturer_id);
}
-DEVICE_ATTR(manufacturer_id, S_IRUGO, manufacturer_id_show, NULL);
+static DEVICE_ATTR(manufacturer_id, S_IRUGO, manufacturer_id_show, NULL);
static ssize_t product_id_show(struct device *dev,
struct device_attribute *attr,
return snprintf(buf, 10, "0x%4.4x\n", bmc->id.product_id);
}
-DEVICE_ATTR(product_id, S_IRUGO, product_id_show, NULL);
+static DEVICE_ATTR(product_id, S_IRUGO, product_id_show, NULL);
static ssize_t aux_firmware_rev_show(struct device *dev,
struct device_attribute *attr,
bmc->id.aux_firmware_revision[1],
bmc->id.aux_firmware_revision[0]);
}
-DEVICE_ATTR(aux_firmware_revision, S_IRUGO, aux_firmware_rev_show, NULL);
+static DEVICE_ATTR(aux_firmware_revision, S_IRUGO, aux_firmware_rev_show, NULL);
static ssize_t guid_show(struct device *dev, struct device_attribute *attr,
char *buf)
(long long) bmc->guid[0],
(long long) bmc->guid[8]);
}
-DEVICE_ATTR(guid, S_IRUGO, guid_show, NULL);
+static DEVICE_ATTR(guid, S_IRUGO, guid_show, NULL);
static struct attribute *bmc_dev_attrs[] = {
&dev_attr_device_id.attr,
if (bmc->id.aux_firmware_revision_set)
device_remove_file(&bmc->pdev.dev,
- &bmc->aux_firmware_rev_attr);
+ &dev_attr_aux_firmware_revision);
if (bmc->guid_set)
device_remove_file(&bmc->pdev.dev,
- &bmc->guid_attr);
+ &dev_attr_guid);
platform_device_unregister(&bmc->pdev);
}
int err;
if (bmc->id.aux_firmware_revision_set) {
- bmc->aux_firmware_rev_attr.attr.name = "aux_firmware_revision";
err = device_create_file(&bmc->pdev.dev,
- &bmc->aux_firmware_rev_attr);
+ &dev_attr_aux_firmware_revision);
if (err)
goto out;
}
if (bmc->guid_set) {
- bmc->guid_attr.attr.name = "guid";
err = device_create_file(&bmc->pdev.dev,
- &bmc->guid_attr);
+ &dev_attr_guid);
if (err)
goto out_aux_firm;
}
out_aux_firm:
if (bmc->id.aux_firmware_revision_set)
device_remove_file(&bmc->pdev.dev,
- &bmc->aux_firmware_rev_attr);
+ &dev_attr_aux_firmware_revision);
out:
return err;
}
#include <linux/dmi.h>
#include <linux/kthread.h>
#include <linux/acpi.h>
+#include <linux/ctype.h>
#define PFX "ipmi_ssif: "
#define DEVICE_NAME "ipmi_ssif"
do_gettimeofday(&t);
pr_info("**Enqueue %02x %02x: %ld.%6.6ld\n",
- msg->data[0], msg->data[1], t.tv_sec, t.tv_usec);
+ msg->data[0], msg->data[1],
+ (long) t.tv_sec, (long) t.tv_usec);
}
}
/* Register the CP15 based counter if we have one */
if (type & ARCH_CP15_TIMER) {
- if (arch_timer_use_virtual)
+ if (IS_ENABLED(CONFIG_ARM64) || arch_timer_use_virtual)
arch_timer_read_counter = arch_counter_get_cntvct;
else
arch_timer_read_counter = arch_counter_get_cntpct;
/* OPPs might be populated at runtime, don't check for error here */
of_init_opp_table(cpu_dev);
+ /*
+ * But we need OPP table to function so if it is not there let's
+ * give platform code chance to provide it for us.
+ */
+ ret = dev_pm_opp_get_opp_count(cpu_dev);
+ if (ret <= 0) {
+ pr_debug("OPP table is not ready, deferring probe\n");
+ ret = -EPROBE_DEFER;
+ goto out_free_opp;
+ }
+
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
/* Don't start any governor operations if we are entering suspend */
if (cpufreq_suspended)
return 0;
+ /*
+ * Governor might not be initiated here if ACPI _PPC changed
+ * notification happened, so check it.
+ */
+ if (!policy->governor)
+ return -EINVAL;
if (policy->governor->max_transition_latency &&
policy->cpuinfo.transition_latency >
last_state = &ldev->states[last_idx];
- if (!(drv->states[last_idx].flags & CPUIDLE_FLAG_TIME_INVALID)) {
- last_residency = cpuidle_get_last_residency(dev) - \
- drv->states[last_idx].exit_latency;
- }
- else
- last_residency = last_state->threshold.promotion_time + 1;
+ last_residency = cpuidle_get_last_residency(dev) - drv->states[last_idx].exit_latency;
/* consider promotion */
if (last_idx < drv->state_count - 1 &&
* power state and occurrence of the wakeup event.
*
* If the entered idle state didn't support residency measurements,
- * we are basically lost in the dark how much time passed.
- * As a compromise, assume we slept for the whole expected time.
+ * we use them anyway if they are short, and if long,
+ * truncate to the whole expected time.
*
* Any measured amount of time will include the exit latency.
* Since we are interested in when the wakeup begun, not when it
* the measured amount of time is less than the exit latency,
* assume the state was never reached and the exit latency is 0.
*/
- if (unlikely(target->flags & CPUIDLE_FLAG_TIME_INVALID)) {
- /* Use timer value as is */
- measured_us = data->next_timer_us;
- } else {
- /* Use measured value */
- measured_us = cpuidle_get_last_residency(dev);
+ /* measured value */
+ measured_us = cpuidle_get_last_residency(dev);
- /* Deduct exit latency */
- if (measured_us > target->exit_latency)
- measured_us -= target->exit_latency;
+ /* Deduct exit latency */
+ if (measured_us > target->exit_latency)
+ measured_us -= target->exit_latency;
- /* Make sure our coefficients do not exceed unity */
- if (measured_us > data->next_timer_us)
- measured_us = data->next_timer_us;
- }
+ /* Make sure our coefficients do not exceed unity */
+ if (measured_us > data->next_timer_us)
+ measured_us = data->next_timer_us;
/* Update our correction ratio */
new_factor = data->correction_factor[data->bucket];
obj-$(CONFIG_DRM_TTM) += ttm/
obj-$(CONFIG_DRM_TDFX) += tdfx/
obj-$(CONFIG_DRM_R128) += r128/
+obj-$(CONFIG_HSA_AMD) += amd/amdkfd/
obj-$(CONFIG_DRM_RADEON)+= radeon/
obj-$(CONFIG_DRM_MGA) += mga/
obj-$(CONFIG_DRM_I810) += i810/
obj-y += i2c/
obj-y += panel/
obj-y += bridge/
-obj-$(CONFIG_HSA_AMD) += amd/amdkfd/
#include <uapi/linux/kfd_ioctl.h>
#include <linux/time.h>
#include <linux/mm.h>
-#include <linux/uaccess.h>
#include <uapi/asm-generic/mman-common.h>
#include <asm/processor.h>
#include "kfd_priv.h"
if (IS_ERR(process))
return PTR_ERR(process);
- process->is_32bit_user_mode = is_32bit_user_mode;
-
dev_dbg(kfd_device, "process %d opened, compat mode (32 bit) - %d\n",
process->pasid, process->is_32bit_user_mode);
- kfd_init_apertures(process);
-
return 0;
}
-static long kfd_ioctl_get_version(struct file *filep, struct kfd_process *p,
- void __user *arg)
+static int kfd_ioctl_get_version(struct file *filep, struct kfd_process *p,
+ void *data)
{
- struct kfd_ioctl_get_version_args args;
+ struct kfd_ioctl_get_version_args *args = data;
int err = 0;
- args.major_version = KFD_IOCTL_MAJOR_VERSION;
- args.minor_version = KFD_IOCTL_MINOR_VERSION;
-
- if (copy_to_user(arg, &args, sizeof(args)))
- err = -EFAULT;
+ args->major_version = KFD_IOCTL_MAJOR_VERSION;
+ args->minor_version = KFD_IOCTL_MINOR_VERSION;
return err;
}
return 0;
}
-static long kfd_ioctl_create_queue(struct file *filep, struct kfd_process *p,
- void __user *arg)
+static int kfd_ioctl_create_queue(struct file *filep, struct kfd_process *p,
+ void *data)
{
- struct kfd_ioctl_create_queue_args args;
+ struct kfd_ioctl_create_queue_args *args = data;
struct kfd_dev *dev;
int err = 0;
unsigned int queue_id;
memset(&q_properties, 0, sizeof(struct queue_properties));
- if (copy_from_user(&args, arg, sizeof(args)))
- return -EFAULT;
-
pr_debug("kfd: creating queue ioctl\n");
- err = set_queue_properties_from_user(&q_properties, &args);
+ err = set_queue_properties_from_user(&q_properties, args);
if (err)
return err;
- dev = kfd_device_by_id(args.gpu_id);
+ dev = kfd_device_by_id(args->gpu_id);
if (dev == NULL)
return -EINVAL;
pdd = kfd_bind_process_to_device(dev, p);
if (IS_ERR(pdd)) {
- err = PTR_ERR(pdd);
+ err = -ESRCH;
goto err_bind_process;
}
if (err != 0)
goto err_create_queue;
- args.queue_id = queue_id;
+ args->queue_id = queue_id;
/* Return gpu_id as doorbell offset for mmap usage */
- args.doorbell_offset = args.gpu_id << PAGE_SHIFT;
-
- if (copy_to_user(arg, &args, sizeof(args))) {
- err = -EFAULT;
- goto err_copy_args_out;
- }
+ args->doorbell_offset = args->gpu_id << PAGE_SHIFT;
mutex_unlock(&p->mutex);
- pr_debug("kfd: queue id %d was created successfully\n", args.queue_id);
+ pr_debug("kfd: queue id %d was created successfully\n", args->queue_id);
pr_debug("ring buffer address == 0x%016llX\n",
- args.ring_base_address);
+ args->ring_base_address);
pr_debug("read ptr address == 0x%016llX\n",
- args.read_pointer_address);
+ args->read_pointer_address);
pr_debug("write ptr address == 0x%016llX\n",
- args.write_pointer_address);
+ args->write_pointer_address);
return 0;
-err_copy_args_out:
- pqm_destroy_queue(&p->pqm, queue_id);
err_create_queue:
err_bind_process:
mutex_unlock(&p->mutex);
}
static int kfd_ioctl_destroy_queue(struct file *filp, struct kfd_process *p,
- void __user *arg)
+ void *data)
{
int retval;
- struct kfd_ioctl_destroy_queue_args args;
-
- if (copy_from_user(&args, arg, sizeof(args)))
- return -EFAULT;
+ struct kfd_ioctl_destroy_queue_args *args = data;
pr_debug("kfd: destroying queue id %d for PASID %d\n",
- args.queue_id,
+ args->queue_id,
p->pasid);
mutex_lock(&p->mutex);
- retval = pqm_destroy_queue(&p->pqm, args.queue_id);
+ retval = pqm_destroy_queue(&p->pqm, args->queue_id);
mutex_unlock(&p->mutex);
return retval;
}
static int kfd_ioctl_update_queue(struct file *filp, struct kfd_process *p,
- void __user *arg)
+ void *data)
{
int retval;
- struct kfd_ioctl_update_queue_args args;
+ struct kfd_ioctl_update_queue_args *args = data;
struct queue_properties properties;
- if (copy_from_user(&args, arg, sizeof(args)))
- return -EFAULT;
-
- if (args.queue_percentage > KFD_MAX_QUEUE_PERCENTAGE) {
+ if (args->queue_percentage > KFD_MAX_QUEUE_PERCENTAGE) {
pr_err("kfd: queue percentage must be between 0 to KFD_MAX_QUEUE_PERCENTAGE\n");
return -EINVAL;
}
- if (args.queue_priority > KFD_MAX_QUEUE_PRIORITY) {
+ if (args->queue_priority > KFD_MAX_QUEUE_PRIORITY) {
pr_err("kfd: queue priority must be between 0 to KFD_MAX_QUEUE_PRIORITY\n");
return -EINVAL;
}
- if ((args.ring_base_address) &&
+ if ((args->ring_base_address) &&
(!access_ok(VERIFY_WRITE,
- (const void __user *) args.ring_base_address,
+ (const void __user *) args->ring_base_address,
sizeof(uint64_t)))) {
pr_err("kfd: can't access ring base address\n");
return -EFAULT;
}
- if (!is_power_of_2(args.ring_size) && (args.ring_size != 0)) {
+ if (!is_power_of_2(args->ring_size) && (args->ring_size != 0)) {
pr_err("kfd: ring size must be a power of 2 or 0\n");
return -EINVAL;
}
- properties.queue_address = args.ring_base_address;
- properties.queue_size = args.ring_size;
- properties.queue_percent = args.queue_percentage;
- properties.priority = args.queue_priority;
+ properties.queue_address = args->ring_base_address;
+ properties.queue_size = args->ring_size;
+ properties.queue_percent = args->queue_percentage;
+ properties.priority = args->queue_priority;
pr_debug("kfd: updating queue id %d for PASID %d\n",
- args.queue_id, p->pasid);
+ args->queue_id, p->pasid);
mutex_lock(&p->mutex);
- retval = pqm_update_queue(&p->pqm, args.queue_id, &properties);
+ retval = pqm_update_queue(&p->pqm, args->queue_id, &properties);
mutex_unlock(&p->mutex);
return retval;
}
-static long kfd_ioctl_set_memory_policy(struct file *filep,
- struct kfd_process *p, void __user *arg)
+static int kfd_ioctl_set_memory_policy(struct file *filep,
+ struct kfd_process *p, void *data)
{
- struct kfd_ioctl_set_memory_policy_args args;
+ struct kfd_ioctl_set_memory_policy_args *args = data;
struct kfd_dev *dev;
int err = 0;
struct kfd_process_device *pdd;
enum cache_policy default_policy, alternate_policy;
- if (copy_from_user(&args, arg, sizeof(args)))
- return -EFAULT;
-
- if (args.default_policy != KFD_IOC_CACHE_POLICY_COHERENT
- && args.default_policy != KFD_IOC_CACHE_POLICY_NONCOHERENT) {
+ if (args->default_policy != KFD_IOC_CACHE_POLICY_COHERENT
+ && args->default_policy != KFD_IOC_CACHE_POLICY_NONCOHERENT) {
return -EINVAL;
}
- if (args.alternate_policy != KFD_IOC_CACHE_POLICY_COHERENT
- && args.alternate_policy != KFD_IOC_CACHE_POLICY_NONCOHERENT) {
+ if (args->alternate_policy != KFD_IOC_CACHE_POLICY_COHERENT
+ && args->alternate_policy != KFD_IOC_CACHE_POLICY_NONCOHERENT) {
return -EINVAL;
}
- dev = kfd_device_by_id(args.gpu_id);
+ dev = kfd_device_by_id(args->gpu_id);
if (dev == NULL)
return -EINVAL;
pdd = kfd_bind_process_to_device(dev, p);
if (IS_ERR(pdd)) {
- err = PTR_ERR(pdd);
+ err = -ESRCH;
goto out;
}
- default_policy = (args.default_policy == KFD_IOC_CACHE_POLICY_COHERENT)
+ default_policy = (args->default_policy == KFD_IOC_CACHE_POLICY_COHERENT)
? cache_policy_coherent : cache_policy_noncoherent;
alternate_policy =
- (args.alternate_policy == KFD_IOC_CACHE_POLICY_COHERENT)
+ (args->alternate_policy == KFD_IOC_CACHE_POLICY_COHERENT)
? cache_policy_coherent : cache_policy_noncoherent;
if (!dev->dqm->set_cache_memory_policy(dev->dqm,
&pdd->qpd,
default_policy,
alternate_policy,
- (void __user *)args.alternate_aperture_base,
- args.alternate_aperture_size))
+ (void __user *)args->alternate_aperture_base,
+ args->alternate_aperture_size))
err = -EINVAL;
out:
return err;
}
-static long kfd_ioctl_get_clock_counters(struct file *filep,
- struct kfd_process *p, void __user *arg)
+static int kfd_ioctl_get_clock_counters(struct file *filep,
+ struct kfd_process *p, void *data)
{
- struct kfd_ioctl_get_clock_counters_args args;
+ struct kfd_ioctl_get_clock_counters_args *args = data;
struct kfd_dev *dev;
struct timespec time;
- if (copy_from_user(&args, arg, sizeof(args)))
- return -EFAULT;
-
- dev = kfd_device_by_id(args.gpu_id);
+ dev = kfd_device_by_id(args->gpu_id);
if (dev == NULL)
return -EINVAL;
/* Reading GPU clock counter from KGD */
- args.gpu_clock_counter = kfd2kgd->get_gpu_clock_counter(dev->kgd);
+ args->gpu_clock_counter = kfd2kgd->get_gpu_clock_counter(dev->kgd);
/* No access to rdtsc. Using raw monotonic time */
getrawmonotonic(&time);
- args.cpu_clock_counter = (uint64_t)timespec_to_ns(&time);
+ args->cpu_clock_counter = (uint64_t)timespec_to_ns(&time);
get_monotonic_boottime(&time);
- args.system_clock_counter = (uint64_t)timespec_to_ns(&time);
+ args->system_clock_counter = (uint64_t)timespec_to_ns(&time);
/* Since the counter is in nano-seconds we use 1GHz frequency */
- args.system_clock_freq = 1000000000;
-
- if (copy_to_user(arg, &args, sizeof(args)))
- return -EFAULT;
+ args->system_clock_freq = 1000000000;
return 0;
}
static int kfd_ioctl_get_process_apertures(struct file *filp,
- struct kfd_process *p, void __user *arg)
+ struct kfd_process *p, void *data)
{
- struct kfd_ioctl_get_process_apertures_args args;
+ struct kfd_ioctl_get_process_apertures_args *args = data;
struct kfd_process_device_apertures *pAperture;
struct kfd_process_device *pdd;
dev_dbg(kfd_device, "get apertures for PASID %d", p->pasid);
- if (copy_from_user(&args, arg, sizeof(args)))
- return -EFAULT;
-
- args.num_of_nodes = 0;
+ args->num_of_nodes = 0;
mutex_lock(&p->mutex);
/* Run over all pdd of the process */
pdd = kfd_get_first_process_device_data(p);
do {
- pAperture = &args.process_apertures[args.num_of_nodes];
+ pAperture =
+ &args->process_apertures[args->num_of_nodes];
pAperture->gpu_id = pdd->dev->id;
pAperture->lds_base = pdd->lds_base;
pAperture->lds_limit = pdd->lds_limit;
pAperture->scratch_limit = pdd->scratch_limit;
dev_dbg(kfd_device,
- "node id %u\n", args.num_of_nodes);
+ "node id %u\n", args->num_of_nodes);
dev_dbg(kfd_device,
"gpu id %u\n", pdd->dev->id);
dev_dbg(kfd_device,
dev_dbg(kfd_device,
"scratch_limit %llX\n", pdd->scratch_limit);
- args.num_of_nodes++;
+ args->num_of_nodes++;
} while ((pdd = kfd_get_next_process_device_data(p, pdd)) != NULL &&
- (args.num_of_nodes < NUM_OF_SUPPORTED_GPUS));
+ (args->num_of_nodes < NUM_OF_SUPPORTED_GPUS));
}
mutex_unlock(&p->mutex);
- if (copy_to_user(arg, &args, sizeof(args)))
- return -EFAULT;
-
return 0;
}
+#define AMDKFD_IOCTL_DEF(ioctl, _func, _flags) \
+ [_IOC_NR(ioctl)] = {.cmd = ioctl, .func = _func, .flags = _flags, .cmd_drv = 0, .name = #ioctl}
+
+/** Ioctl table */
+static const struct amdkfd_ioctl_desc amdkfd_ioctls[] = {
+ AMDKFD_IOCTL_DEF(AMDKFD_IOC_GET_VERSION,
+ kfd_ioctl_get_version, 0),
+
+ AMDKFD_IOCTL_DEF(AMDKFD_IOC_CREATE_QUEUE,
+ kfd_ioctl_create_queue, 0),
+
+ AMDKFD_IOCTL_DEF(AMDKFD_IOC_DESTROY_QUEUE,
+ kfd_ioctl_destroy_queue, 0),
+
+ AMDKFD_IOCTL_DEF(AMDKFD_IOC_SET_MEMORY_POLICY,
+ kfd_ioctl_set_memory_policy, 0),
+
+ AMDKFD_IOCTL_DEF(AMDKFD_IOC_GET_CLOCK_COUNTERS,
+ kfd_ioctl_get_clock_counters, 0),
+
+ AMDKFD_IOCTL_DEF(AMDKFD_IOC_GET_PROCESS_APERTURES,
+ kfd_ioctl_get_process_apertures, 0),
+
+ AMDKFD_IOCTL_DEF(AMDKFD_IOC_UPDATE_QUEUE,
+ kfd_ioctl_update_queue, 0),
+};
+
+#define AMDKFD_CORE_IOCTL_COUNT ARRAY_SIZE(amdkfd_ioctls)
+
static long kfd_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
{
struct kfd_process *process;
- long err = -EINVAL;
+ amdkfd_ioctl_t *func;
+ const struct amdkfd_ioctl_desc *ioctl = NULL;
+ unsigned int nr = _IOC_NR(cmd);
+ char stack_kdata[128];
+ char *kdata = NULL;
+ unsigned int usize, asize;
+ int retcode = -EINVAL;
+
+ if (nr >= AMDKFD_CORE_IOCTL_COUNT)
+ goto err_i1;
+
+ if ((nr >= AMDKFD_COMMAND_START) && (nr < AMDKFD_COMMAND_END)) {
+ u32 amdkfd_size;
+
+ ioctl = &amdkfd_ioctls[nr];
- dev_dbg(kfd_device,
- "ioctl cmd 0x%x (#%d), arg 0x%lx\n",
- cmd, _IOC_NR(cmd), arg);
+ amdkfd_size = _IOC_SIZE(ioctl->cmd);
+ usize = asize = _IOC_SIZE(cmd);
+ if (amdkfd_size > asize)
+ asize = amdkfd_size;
+
+ cmd = ioctl->cmd;
+ } else
+ goto err_i1;
+
+ dev_dbg(kfd_device, "ioctl cmd 0x%x (#%d), arg 0x%lx\n", cmd, nr, arg);
process = kfd_get_process(current);
- if (IS_ERR(process))
- return PTR_ERR(process);
+ if (IS_ERR(process)) {
+ dev_dbg(kfd_device, "no process\n");
+ goto err_i1;
+ }
- switch (cmd) {
- case KFD_IOC_GET_VERSION:
- err = kfd_ioctl_get_version(filep, process, (void __user *)arg);
- break;
- case KFD_IOC_CREATE_QUEUE:
- err = kfd_ioctl_create_queue(filep, process,
- (void __user *)arg);
- break;
-
- case KFD_IOC_DESTROY_QUEUE:
- err = kfd_ioctl_destroy_queue(filep, process,
- (void __user *)arg);
- break;
-
- case KFD_IOC_SET_MEMORY_POLICY:
- err = kfd_ioctl_set_memory_policy(filep, process,
- (void __user *)arg);
- break;
-
- case KFD_IOC_GET_CLOCK_COUNTERS:
- err = kfd_ioctl_get_clock_counters(filep, process,
- (void __user *)arg);
- break;
-
- case KFD_IOC_GET_PROCESS_APERTURES:
- err = kfd_ioctl_get_process_apertures(filep, process,
- (void __user *)arg);
- break;
-
- case KFD_IOC_UPDATE_QUEUE:
- err = kfd_ioctl_update_queue(filep, process,
- (void __user *)arg);
- break;
-
- default:
- dev_err(kfd_device,
- "unknown ioctl cmd 0x%x, arg 0x%lx)\n",
- cmd, arg);
- err = -EINVAL;
- break;
+ /* Do not trust userspace, use our own definition */
+ func = ioctl->func;
+
+ if (unlikely(!func)) {
+ dev_dbg(kfd_device, "no function\n");
+ retcode = -EINVAL;
+ goto err_i1;
}
- if (err < 0)
- dev_err(kfd_device,
- "ioctl error %ld for ioctl cmd 0x%x (#%d)\n",
- err, cmd, _IOC_NR(cmd));
+ if (cmd & (IOC_IN | IOC_OUT)) {
+ if (asize <= sizeof(stack_kdata)) {
+ kdata = stack_kdata;
+ } else {
+ kdata = kmalloc(asize, GFP_KERNEL);
+ if (!kdata) {
+ retcode = -ENOMEM;
+ goto err_i1;
+ }
+ }
+ if (asize > usize)
+ memset(kdata + usize, 0, asize - usize);
+ }
- return err;
+ if (cmd & IOC_IN) {
+ if (copy_from_user(kdata, (void __user *)arg, usize) != 0) {
+ retcode = -EFAULT;
+ goto err_i1;
+ }
+ } else if (cmd & IOC_OUT) {
+ memset(kdata, 0, usize);
+ }
+
+ retcode = func(filep, process, kdata);
+
+ if (cmd & IOC_OUT)
+ if (copy_to_user((void __user *)arg, kdata, usize) != 0)
+ retcode = -EFAULT;
+
+err_i1:
+ if (!ioctl)
+ dev_dbg(kfd_device, "invalid ioctl: pid=%d, cmd=0x%02x, nr=0x%02x\n",
+ task_pid_nr(current), cmd, nr);
+
+ if (kdata != stack_kdata)
+ kfree(kdata);
+
+ if (retcode)
+ dev_dbg(kfd_device, "ret = %d\n", retcode);
+
+ return retcode;
}
static int kfd_mmap(struct file *filp, struct vm_area_struct *vma)
{
int bit = qpd->vmid - KFD_VMID_START_OFFSET;
+ /* Release the vmid mapping */
+ set_pasid_vmid_mapping(dqm, 0, qpd->vmid);
+
set_bit(bit, (unsigned long *)&dqm->vmid_bitmap);
qpd->vmid = 0;
q->properties.vmid = 0;
return retval;
}
+ pr_debug("kfd: loading mqd to hqd on pipe (%d) queue (%d)\n",
+ q->pipe,
+ q->queue);
+
+ retval = mqd->load_mqd(mqd, q->mqd, q->pipe,
+ q->queue, q->properties.write_ptr);
+ if (retval != 0) {
+ deallocate_hqd(dqm, q);
+ mqd->uninit_mqd(mqd, q->mqd, q->mqd_mem_obj);
+ return retval;
+ }
+
return 0;
}
{
int retval;
struct mqd_manager *mqd;
+ bool prev_active = false;
BUG_ON(!dqm || !q || !q->mqd);
return -ENOMEM;
}
- retval = mqd->update_mqd(mqd, q->mqd, &q->properties);
if (q->properties.is_active == true)
+ prev_active = true;
+
+ /*
+ *
+ * check active state vs. the previous state
+ * and modify counter accordingly
+ */
+ retval = mqd->update_mqd(mqd, q->mqd, &q->properties);
+ if ((q->properties.is_active == true) && (prev_active == false))
dqm->queue_count++;
- else
+ else if ((q->properties.is_active == false) && (prev_active == true))
dqm->queue_count--;
if (sched_policy != KFD_SCHED_POLICY_NO_HWS)
struct kfd_dev *dev;
struct kfd_process_device *pdd;
- mutex_lock(&process->mutex);
-
/*Iterating over all devices*/
while ((dev = kfd_topology_enum_kfd_devices(id)) != NULL &&
id < NUM_OF_SUPPORTED_GPUS) {
pdd = kfd_get_process_device_data(dev, process, 1);
+ if (!pdd)
+ return -1;
/*
* For 64 bit process aperture will be statically reserved in
id++;
}
- mutex_unlock(&process->mutex);
-
return 0;
}
uint32_t queue_id)
{
- return kfd2kgd->hqd_is_occupies(mm->dev->kgd, queue_address,
+ return kfd2kgd->hqd_is_occupied(mm->dev->kgd, queue_address,
pipe_id, queue_id);
}
{
pasid_limit = max_num_of_processes;
- pasid_bitmap = kzalloc(BITS_TO_LONGS(pasid_limit), GFP_KERNEL);
+ pasid_bitmap = kcalloc(BITS_TO_LONGS(pasid_limit), sizeof(long), GFP_KERNEL);
if (!pasid_bitmap)
return -ENOMEM;
bool is_32bit_user_mode;
};
+/**
+ * Ioctl function type.
+ *
+ * \param filep pointer to file structure.
+ * \param p amdkfd process pointer.
+ * \param data pointer to arg that was copied from user.
+ */
+typedef int amdkfd_ioctl_t(struct file *filep, struct kfd_process *p,
+ void *data);
+
+struct amdkfd_ioctl_desc {
+ unsigned int cmd;
+ int flags;
+ amdkfd_ioctl_t *func;
+ unsigned int cmd_drv;
+ const char *name;
+};
+
void kfd_process_create_wq(void);
void kfd_process_destroy_wq(void);
struct kfd_process *kfd_create_process(const struct task_struct *);
#include <linux/slab.h>
#include <linux/amd-iommu.h>
#include <linux/notifier.h>
+#include <linux/compat.h>
+
struct mm_struct;
#include "kfd_priv.h"
if (err != 0)
goto err_process_pqm_init;
+ /* init process apertures*/
+ process->is_32bit_user_mode = is_compat_task();
+ if (kfd_init_apertures(process) != 0)
+ goto err_init_apretures;
+
return process;
+err_init_apretures:
+ pqm_uninit(&process->pqm);
err_process_pqm_init:
hash_del_rcu(&process->kfd_processes);
synchronize_rcu();
dev->node_props.simd_per_cu);
sysfs_show_32bit_prop(buffer, "max_slots_scratch_cu",
dev->node_props.max_slots_scratch_cu);
- sysfs_show_32bit_prop(buffer, "engine_id",
- dev->node_props.engine_id);
sysfs_show_32bit_prop(buffer, "vendor_id",
dev->node_props.vendor_id);
sysfs_show_32bit_prop(buffer, "device_id",
dev->gpu->kgd));
sysfs_show_64bit_prop(buffer, "local_mem_size",
kfd2kgd->get_vmem_size(dev->gpu->kgd));
+
+ sysfs_show_32bit_prop(buffer, "fw_version",
+ kfd2kgd->get_fw_version(
+ dev->gpu->kgd,
+ KGD_ENGINE_MEC1));
+
}
ret = sysfs_show_32bit_prop(buffer, "max_engine_clk_ccompute",
uint32_t i = 0;
list_for_each_entry(dev, &topology_device_list, list) {
- ret = kfd_build_sysfs_node_entry(dev, 0);
+ ret = kfd_build_sysfs_node_entry(dev, i);
if (ret < 0)
return ret;
i++;
KGD_POOL_FRAMEBUFFER = 3,
};
+enum kgd_engine_type {
+ KGD_ENGINE_PFP = 1,
+ KGD_ENGINE_ME,
+ KGD_ENGINE_CE,
+ KGD_ENGINE_MEC1,
+ KGD_ENGINE_MEC2,
+ KGD_ENGINE_RLC,
+ KGD_ENGINE_SDMA,
+ KGD_ENGINE_MAX
+};
+
struct kgd2kfd_shared_resources {
/* Bit n == 1 means VMID n is available for KFD. */
unsigned int compute_vmid_bitmap;
*
* @hqd_destroy: Destructs and preempts the queue assigned to that hqd slot.
*
+ * @get_fw_version: Returns FW versions from the header
+ *
* This structure contains function pointers to services that the kgd driver
* provides to amdkfd driver.
*
int (*hqd_load)(struct kgd_dev *kgd, void *mqd, uint32_t pipe_id,
uint32_t queue_id, uint32_t __user *wptr);
- bool (*hqd_is_occupies)(struct kgd_dev *kgd, uint64_t queue_address,
+ bool (*hqd_is_occupied)(struct kgd_dev *kgd, uint64_t queue_address,
uint32_t pipe_id, uint32_t queue_id);
int (*hqd_destroy)(struct kgd_dev *kgd, uint32_t reset_type,
unsigned int timeout, uint32_t pipe_id,
uint32_t queue_id);
+ uint16_t (*get_fw_version)(struct kgd_dev *kgd,
+ enum kgd_engine_type type);
};
bool kgd2kfd_init(unsigned interface_version,
struct drm_crtc_state *crtc_state;
if (plane->state->crtc) {
- crtc_state = state->crtc_states[drm_crtc_index(plane->crtc)];
+ crtc_state = state->crtc_states[drm_crtc_index(plane->state->crtc)];
if (WARN_ON(!crtc_state))
return;
* vblank events since the system was booted, including lost events due to
* modesetting activity.
*
+ * This is the legacy version of drm_crtc_vblank_count().
+ *
* Returns:
* The software vblank counter.
*/
}
EXPORT_SYMBOL(drm_vblank_count);
+/**
+ * drm_crtc_vblank_count - retrieve "cooked" vblank counter value
+ * @crtc: which counter to retrieve
+ *
+ * Fetches the "cooked" vblank count value that represents the number of
+ * vblank events since the system was booted, including lost events due to
+ * modesetting activity.
+ *
+ * This is the native KMS version of drm_vblank_count().
+ *
+ * Returns:
+ * The software vblank counter.
+ */
+u32 drm_crtc_vblank_count(struct drm_crtc *crtc)
+{
+ return drm_vblank_count(crtc->dev, drm_crtc_index(crtc));
+}
+EXPORT_SYMBOL(drm_crtc_vblank_count);
+
/**
* drm_vblank_count_and_time - retrieve "cooked" vblank counter value
* and the system timestamp corresponding to that vblank counter value.
*
* Updates sequence # and timestamp on event, and sends it to userspace.
* Caller must hold event lock.
+ *
+ * This is the legacy version of drm_crtc_send_vblank_event().
*/
void drm_send_vblank_event(struct drm_device *dev, int crtc,
struct drm_pending_vblank_event *e)
}
EXPORT_SYMBOL(drm_send_vblank_event);
+/**
+ * drm_crtc_send_vblank_event - helper to send vblank event after pageflip
+ * @crtc: the source CRTC of the vblank event
+ * @e: the event to send
+ *
+ * Updates sequence # and timestamp on event, and sends it to userspace.
+ * Caller must hold event lock.
+ *
+ * This is the native KMS version of drm_send_vblank_event().
+ */
+void drm_crtc_send_vblank_event(struct drm_crtc *crtc,
+ struct drm_pending_vblank_event *e)
+{
+ drm_send_vblank_event(crtc->dev, drm_crtc_index(crtc), e);
+}
+EXPORT_SYMBOL(drm_crtc_send_vblank_event);
+
/**
* drm_vblank_enable - enable the vblank interrupt on a CRTC
* @dev: DRM device
*
* Drivers should call this routine in their vblank interrupt handlers to
* update the vblank counter and send any signals that may be pending.
+ *
+ * This is the legacy version of drm_crtc_handle_vblank().
*/
bool drm_handle_vblank(struct drm_device *dev, int crtc)
{
return true;
}
EXPORT_SYMBOL(drm_handle_vblank);
+
+/**
+ * drm_crtc_handle_vblank - handle a vblank event
+ * @crtc: where this event occurred
+ *
+ * Drivers should call this routine in their vblank interrupt handlers to
+ * update the vblank counter and send any signals that may be pending.
+ *
+ * This is the native KMS version of drm_handle_vblank().
+ *
+ * Returns:
+ * True if the event was successfully handled, false on failure.
+ */
+bool drm_crtc_handle_vblank(struct drm_crtc *crtc)
+{
+ return drm_handle_vblank(crtc->dev, drm_crtc_index(crtc));
+}
+EXPORT_SYMBOL(drm_crtc_handle_vblank);
if (!i915.reset)
return 0;
+ intel_reset_gt_powersave(dev);
+
mutex_lock(&dev->struct_mutex);
i915_gem_reset(dev);
* of re-init after reset.
*/
if (INTEL_INFO(dev)->gen > 5)
- intel_reset_gt_powersave(dev);
+ intel_enable_gt_powersave(dev);
} else {
mutex_unlock(&dev->struct_mutex);
}
.gem_prime_import = i915_gem_prime_import,
.dumb_create = i915_gem_dumb_create,
- .dumb_map_offset = i915_gem_dumb_map_offset,
+ .dumb_map_offset = i915_gem_mmap_gtt,
.dumb_destroy = drm_gem_dumb_destroy,
.ioctls = i915_ioctls,
.fops = &i915_driver_fops,
*/
struct workqueue_struct *dp_wq;
- uint32_t bios_vgacntr;
-
/* Abstract the submission mechanism (legacy ringbuffer or execlists) away */
struct {
int (*do_execbuf)(struct drm_device *dev, struct drm_file *file,
int i915_gem_dumb_create(struct drm_file *file_priv,
struct drm_device *dev,
struct drm_mode_create_dumb *args);
-int i915_gem_dumb_map_offset(struct drm_file *file_priv,
- struct drm_device *dev, uint32_t handle,
- uint64_t *offset);
+int i915_gem_mmap_gtt(struct drm_file *file_priv, struct drm_device *dev,
+ uint32_t handle, uint64_t *offset);
/**
* Returns true if seq1 is later than seq2.
*/
i915_gem_create(struct drm_file *file,
struct drm_device *dev,
uint64_t size,
- bool dumb,
uint32_t *handle_p)
{
struct drm_i915_gem_object *obj;
if (obj == NULL)
return -ENOMEM;
- obj->base.dumb = dumb;
ret = drm_gem_handle_create(file, &obj->base, &handle);
/* drop reference from allocate - handle holds it now */
drm_gem_object_unreference_unlocked(&obj->base);
args->pitch = ALIGN(args->width * DIV_ROUND_UP(args->bpp, 8), 64);
args->size = args->pitch * args->height;
return i915_gem_create(file, dev,
- args->size, true, &args->handle);
+ args->size, &args->handle);
}
/**
struct drm_i915_gem_create *args = data;
return i915_gem_create(file, dev,
- args->size, false, &args->handle);
+ args->size, &args->handle);
}
static inline int
i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_pwrite *args = data;
struct drm_i915_gem_object *obj;
int ret;
return -EFAULT;
}
+ intel_runtime_pm_get(dev_priv);
+
ret = i915_mutex_lock_interruptible(dev);
if (ret)
- return ret;
+ goto put_rpm;
obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
if (&obj->base == NULL) {
drm_gem_object_unreference(&obj->base);
unlock:
mutex_unlock(&dev->struct_mutex);
+put_rpm:
+ intel_runtime_pm_put(dev_priv);
+
return ret;
}
drm_gem_free_mmap_offset(&obj->base);
}
-static int
+int
i915_gem_mmap_gtt(struct drm_file *file,
struct drm_device *dev,
- uint32_t handle, bool dumb,
+ uint32_t handle,
uint64_t *offset)
{
struct drm_i915_private *dev_priv = dev->dev_private;
goto unlock;
}
- /*
- * We don't allow dumb mmaps on objects created using another
- * interface.
- */
- WARN_ONCE(dumb && !(obj->base.dumb || obj->base.import_attach),
- "Illegal dumb map of accelerated buffer.\n");
-
if (obj->base.size > dev_priv->gtt.mappable_end) {
ret = -E2BIG;
goto out;
return ret;
}
-int
-i915_gem_dumb_map_offset(struct drm_file *file,
- struct drm_device *dev,
- uint32_t handle,
- uint64_t *offset)
-{
- return i915_gem_mmap_gtt(file, dev, handle, true, offset);
-}
-
/**
* i915_gem_mmap_gtt_ioctl - prepare an object for GTT mmap'ing
* @dev: DRM device
{
struct drm_i915_gem_mmap_gtt *args = data;
- return i915_gem_mmap_gtt(file, dev, args->handle, false, &args->offset);
+ return i915_gem_mmap_gtt(file, dev, args->handle, &args->offset);
}
static inline int
u32 hw_flags)
{
u32 flags = hw_flags | MI_MM_SPACE_GTT;
- int ret;
+ const int num_rings =
+ /* Use an extended w/a on ivb+ if signalling from other rings */
+ i915_semaphore_is_enabled(ring->dev) ?
+ hweight32(INTEL_INFO(ring->dev)->ring_mask) - 1 :
+ 0;
+ int len, i, ret;
/* w/a: If Flush TLB Invalidation Mode is enabled, driver must do a TLB
* invalidation prior to MI_SET_CONTEXT. On GEN6 we don't set the value
if (!IS_HASWELL(ring->dev) && INTEL_INFO(ring->dev)->gen < 8)
flags |= (MI_SAVE_EXT_STATE_EN | MI_RESTORE_EXT_STATE_EN);
- ret = intel_ring_begin(ring, 6);
+
+ len = 4;
+ if (INTEL_INFO(ring->dev)->gen >= 7)
+ len += 2 + (num_rings ? 4*num_rings + 2 : 0);
+
+ ret = intel_ring_begin(ring, len);
if (ret)
return ret;
/* WaProgramMiArbOnOffAroundMiSetContext:ivb,vlv,hsw,bdw,chv */
- if (INTEL_INFO(ring->dev)->gen >= 7)
+ if (INTEL_INFO(ring->dev)->gen >= 7) {
intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_DISABLE);
- else
- intel_ring_emit(ring, MI_NOOP);
+ if (num_rings) {
+ struct intel_engine_cs *signaller;
+
+ intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(num_rings));
+ for_each_ring(signaller, to_i915(ring->dev), i) {
+ if (signaller == ring)
+ continue;
+
+ intel_ring_emit(ring, RING_PSMI_CTL(signaller->mmio_base));
+ intel_ring_emit(ring, _MASKED_BIT_ENABLE(GEN6_PSMI_SLEEP_MSG_DISABLE));
+ }
+ }
+ }
intel_ring_emit(ring, MI_NOOP);
intel_ring_emit(ring, MI_SET_CONTEXT);
*/
intel_ring_emit(ring, MI_NOOP);
- if (INTEL_INFO(ring->dev)->gen >= 7)
+ if (INTEL_INFO(ring->dev)->gen >= 7) {
+ if (num_rings) {
+ struct intel_engine_cs *signaller;
+
+ intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(num_rings));
+ for_each_ring(signaller, to_i915(ring->dev), i) {
+ if (signaller == ring)
+ continue;
+
+ intel_ring_emit(ring, RING_PSMI_CTL(signaller->mmio_base));
+ intel_ring_emit(ring, _MASKED_BIT_DISABLE(GEN6_PSMI_SLEEP_MSG_DISABLE));
+ }
+ }
intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE);
- else
- intel_ring_emit(ring, MI_NOOP);
+ }
intel_ring_advance(ring);
goto err;
}
- WARN_ONCE(obj->base.dumb,
- "GPU use of dumb buffer is illegal.\n");
-
drm_gem_object_reference(&obj->base);
list_add_tail(&obj->obj_exec_link, &objects);
}
struct drm_i915_private *dev_priv = dev->dev_private;
spin_lock_irq(&dev_priv->irq_lock);
+
WARN_ON(dev_priv->rps.pm_iir);
WARN_ON(I915_READ(gen6_pm_iir(dev_priv)) & dev_priv->pm_rps_events);
dev_priv->rps.interrupts_enabled = true;
+ I915_WRITE(gen6_pm_ier(dev_priv), I915_READ(gen6_pm_ier(dev_priv)) |
+ dev_priv->pm_rps_events);
gen6_enable_pm_irq(dev_priv, dev_priv->pm_rps_events);
+
spin_unlock_irq(&dev_priv->irq_lock);
}
GEN5_IRQ_INIT(GT, dev_priv->gt_irq_mask, gt_irqs);
if (INTEL_INFO(dev)->gen >= 6) {
- pm_irqs |= dev_priv->pm_rps_events;
-
+ /*
+ * RPS interrupts will get enabled/disabled on demand when RPS
+ * itself is enabled/disabled.
+ */
if (HAS_VEBOX(dev))
pm_irqs |= PM_VEBOX_USER_INTERRUPT;
dev_priv->pm_irq_mask = 0xffffffff;
GEN8_IRQ_INIT_NDX(GT, 0, ~gt_interrupts[0], gt_interrupts[0]);
GEN8_IRQ_INIT_NDX(GT, 1, ~gt_interrupts[1], gt_interrupts[1]);
- GEN8_IRQ_INIT_NDX(GT, 2, dev_priv->pm_irq_mask, dev_priv->pm_rps_events);
+ /*
+ * RPS interrupts will get enabled/disabled on demand when RPS itself
+ * is enabled/disabled.
+ */
+ GEN8_IRQ_INIT_NDX(GT, 2, dev_priv->pm_irq_mask, 0);
GEN8_IRQ_INIT_NDX(GT, 3, ~gt_interrupts[3], gt_interrupts[3]);
}
vlv_display_irq_reset(dev_priv);
- dev_priv->irq_mask = 0;
+ dev_priv->irq_mask = ~0;
}
static void valleyview_irq_uninstall(struct drm_device *dev)
if ((iir & flip_pending) == 0)
goto check_page_flip;
- intel_prepare_page_flip(dev, plane);
-
/* We detect FlipDone by looking for the change in PendingFlip from '1'
* to '0' on the following vblank, i.e. IIR has the Pendingflip
* asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
if (I915_READ16(ISR) & flip_pending)
goto check_page_flip;
+ intel_prepare_page_flip(dev, plane);
intel_finish_page_flip(dev, pipe);
return true;
if ((iir & flip_pending) == 0)
goto check_page_flip;
- intel_prepare_page_flip(dev, plane);
-
/* We detect FlipDone by looking for the change in PendingFlip from '1'
* to '0' on the following vblank, i.e. IIR has the Pendingflip
* asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
if (I915_READ(ISR) & flip_pending)
goto check_page_flip;
+ intel_prepare_page_flip(dev, plane);
intel_finish_page_flip(dev, pipe);
return true;
#define PIPE_CONTROL_STORE_DATA_INDEX (1<<21)
#define PIPE_CONTROL_CS_STALL (1<<20)
#define PIPE_CONTROL_TLB_INVALIDATE (1<<18)
+#define PIPE_CONTROL_MEDIA_STATE_CLEAR (1<<16)
#define PIPE_CONTROL_QW_WRITE (1<<14)
#define PIPE_CONTROL_POST_SYNC_OP_MASK (3<<14)
#define PIPE_CONTROL_DEPTH_STALL (1<<13)
#define GEN6_VERSYNC (RING_SYNC_1(VEBOX_RING_BASE))
#define GEN6_VEVSYNC (RING_SYNC_2(VEBOX_RING_BASE))
#define GEN6_NOSYNC 0
+#define RING_PSMI_CTL(base) ((base)+0x50)
#define RING_MAX_IDLE(base) ((base)+0x54)
#define RING_HWS_PGA(base) ((base)+0x80)
#define RING_HWS_PGA_GEN6(base) ((base)+0x2080)
#define GEN6_BLITTER_FBC_NOTIFY (1<<3)
#define GEN6_RC_SLEEP_PSMI_CONTROL 0x2050
+#define GEN6_PSMI_SLEEP_MSG_DISABLE (1 << 0)
#define GEN8_RC_SEMA_IDLE_MSG_DISABLE (1 << 12)
#define GEN8_FF_DOP_CLOCK_GATE_DISABLE (1<<10)
vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
udelay(300);
- /*
- * Fujitsu-Siemens Lifebook S6010 (830) has problems resuming
- * from S3 without preserving (some of?) the other bits.
- */
- I915_WRITE(vga_reg, dev_priv->bios_vgacntr | VGA_DISP_DISABLE);
+ I915_WRITE(vga_reg, VGA_DISP_DISABLE);
POSTING_READ(vga_reg);
}
intel_shared_dpll_init(dev);
- /* save the BIOS value before clobbering it */
- dev_priv->bios_vgacntr = I915_READ(i915_vgacntrl_reg(dev));
/* Just disable it once at startup */
i915_disable_vga(dev);
intel_setup_outputs(dev);
valleyview_cleanup_gt_powersave(dev);
}
+static void gen6_suspend_rps(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ flush_delayed_work(&dev_priv->rps.delayed_resume_work);
+
+ /*
+ * TODO: disable RPS interrupts on GEN9+ too once RPS support
+ * is added for it.
+ */
+ if (INTEL_INFO(dev)->gen < 9)
+ gen6_disable_rps_interrupts(dev);
+}
+
/**
* intel_suspend_gt_powersave - suspend PM work and helper threads
* @dev: drm device
if (INTEL_INFO(dev)->gen < 6)
return;
- flush_delayed_work(&dev_priv->rps.delayed_resume_work);
-
- /*
- * TODO: disable RPS interrupts on GEN9+ too once RPS support
- * is added for it.
- */
- if (INTEL_INFO(dev)->gen < 9)
- gen6_disable_rps_interrupts(dev);
+ gen6_suspend_rps(dev);
/* Force GPU to min freq during suspend */
gen6_rps_idle(dev_priv);
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ if (INTEL_INFO(dev)->gen < 6)
+ return;
+
+ gen6_suspend_rps(dev);
dev_priv->rps.enabled = false;
- intel_enable_gt_powersave(dev);
}
static void ibx_init_clock_gating(struct drm_device *dev)
flags |= PIPE_CONTROL_VF_CACHE_INVALIDATE;
flags |= PIPE_CONTROL_CONST_CACHE_INVALIDATE;
flags |= PIPE_CONTROL_STATE_CACHE_INVALIDATE;
+ flags |= PIPE_CONTROL_MEDIA_STATE_CLEAR;
/*
* TLB invalidate requires a post-sync write.
*/
flags |= PIPE_CONTROL_QW_WRITE;
flags |= PIPE_CONTROL_GLOBAL_GTT_IVB;
+ flags |= PIPE_CONTROL_STALL_AT_SCOREBOARD;
+
/* Workaround: we must issue a pipe_control with CS-stall bit
* set before a pipe_control command that has the state cache
* invalidate bit set. */
vlv_power_sequencer_reset(dev_priv);
}
-static void check_power_well_state(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- bool enabled = power_well->ops->is_enabled(dev_priv, power_well);
-
- if (power_well->always_on || !i915.disable_power_well) {
- if (!enabled)
- goto mismatch;
-
- return;
- }
-
- if (enabled != (power_well->count > 0))
- goto mismatch;
-
- return;
-
-mismatch:
- WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n",
- power_well->name, power_well->always_on, enabled,
- power_well->count, i915.disable_power_well);
-}
-
/**
* intel_display_power_get - grab a power domain reference
* @dev_priv: i915 device instance
power_well->ops->enable(dev_priv, power_well);
power_well->hw_enabled = true;
}
-
- check_power_well_state(dev_priv, power_well);
}
power_domains->domain_use_count[domain]++;
power_well->hw_enabled = false;
power_well->ops->disable(dev_priv, power_well);
}
-
- check_power_well_state(dev_priv, power_well);
}
mutex_unlock(&power_domains->lock);
msm_gem_put_iova(gpu->memptrs_bo, gpu->base.id);
drm_gem_object_unreference(gpu->memptrs_bo);
}
- if (gpu->pm4)
- release_firmware(gpu->pm4);
- if (gpu->pfp)
- release_firmware(gpu->pfp);
+ release_firmware(gpu->pm4);
+ release_firmware(gpu->pfp);
msm_gpu_cleanup(&gpu->base);
}
uint32_t hpd_ctrl;
int i, ret;
+ for (i = 0; i < config->hpd_reg_cnt; i++) {
+ ret = regulator_enable(hdmi->hpd_regs[i]);
+ if (ret) {
+ dev_err(dev->dev, "failed to enable hpd regulator: %s (%d)\n",
+ config->hpd_reg_names[i], ret);
+ goto fail;
+ }
+ }
+
ret = gpio_config(hdmi, true);
if (ret) {
dev_err(dev->dev, "failed to configure GPIOs: %d\n", ret);
}
}
- for (i = 0; i < config->hpd_reg_cnt; i++) {
- ret = regulator_enable(hdmi->hpd_regs[i]);
- if (ret) {
- dev_err(dev->dev, "failed to enable hpd regulator: %s (%d)\n",
- config->hpd_reg_names[i], ret);
- goto fail;
- }
- }
-
hdmi_set_mode(hdmi, false);
phy->funcs->reset(phy);
hdmi_set_mode(hdmi, true);
return ret;
}
-static int hdp_disable(struct hdmi_connector *hdmi_connector)
+static void hdp_disable(struct hdmi_connector *hdmi_connector)
{
struct hdmi *hdmi = hdmi_connector->hdmi;
const struct hdmi_platform_config *config = hdmi->config;
hdmi_set_mode(hdmi, false);
- for (i = 0; i < config->hpd_reg_cnt; i++) {
- ret = regulator_disable(hdmi->hpd_regs[i]);
- if (ret) {
- dev_err(dev->dev, "failed to disable hpd regulator: %s (%d)\n",
- config->hpd_reg_names[i], ret);
- goto fail;
- }
- }
-
for (i = 0; i < config->hpd_clk_cnt; i++)
clk_disable_unprepare(hdmi->hpd_clks[i]);
ret = gpio_config(hdmi, false);
- if (ret) {
- dev_err(dev->dev, "failed to unconfigure GPIOs: %d\n", ret);
- goto fail;
- }
-
- return 0;
+ if (ret)
+ dev_warn(dev->dev, "failed to unconfigure GPIOs: %d\n", ret);
-fail:
- return ret;
+ for (i = 0; i < config->hpd_reg_cnt; i++) {
+ ret = regulator_disable(hdmi->hpd_regs[i]);
+ if (ret)
+ dev_warn(dev->dev, "failed to disable hpd regulator: %s (%d)\n",
+ config->hpd_reg_names[i], ret);
+ }
}
static void
(hpd_int_status & HDMI_HPD_INT_STATUS_INT)) {
bool detected = !!(hpd_int_status & HDMI_HPD_INT_STATUS_CABLE_DETECTED);
- DBG("status=%04x, ctrl=%04x", hpd_int_status, hpd_int_ctrl);
-
- /* ack the irq: */
+ /* ack & disable (temporarily) HPD events: */
hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL,
- hpd_int_ctrl | HDMI_HPD_INT_CTRL_INT_ACK);
+ HDMI_HPD_INT_CTRL_INT_ACK);
+
+ DBG("status=%04x, ctrl=%04x", hpd_int_status, hpd_int_ctrl);
/* detect disconnect if we are connected or visa versa: */
hpd_int_ctrl = HDMI_HPD_INT_CTRL_INT_EN;
struct drm_crtc_state *state)
{
struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
- struct drm_device *dev = crtc->dev;
-
DBG("%s: check", mdp4_crtc->name);
-
- if (mdp4_crtc->event) {
- dev_err(dev->dev, "already pending flip!\n");
- return -EBUSY;
- }
-
// TODO anything else to check?
-
return 0;
}
struct drm_device *dev = crtc->dev;
unsigned long flags;
- DBG("%s: flush", mdp4_crtc->name);
+ DBG("%s: event: %p", mdp4_crtc->name, crtc->state->event);
WARN_ON(mdp4_crtc->event);
DBG("%s: check", mdp5_crtc->name);
- if (mdp5_crtc->event) {
- dev_err(dev->dev, "already pending flip!\n");
- return -EBUSY;
- }
-
/* request a free CTL, if none is already allocated for this CRTC */
if (state->enable && !mdp5_crtc->ctl) {
mdp5_crtc->ctl = mdp5_ctlm_request(mdp5_kms->ctlm, crtc);
struct drm_device *dev = crtc->dev;
unsigned long flags;
- DBG("%s: flush", mdp5_crtc->name);
+ DBG("%s: event: %p", mdp5_crtc->name, crtc->state->event);
WARN_ON(mdp5_crtc->event);
/* now that we know what irq's we want: */
mdp5_crtc->err.irqmask = intf2err(intf);
mdp5_crtc->vblank.irqmask = intf2vblank(intf);
-
- /* when called from modeset_init(), skip the rest until later: */
- if (!mdp5_kms)
- return;
+ mdp_irq_update(&mdp5_kms->base);
spin_lock_irqsave(&mdp5_kms->resource_lock, flags);
intf_sel = mdp5_read(mdp5_kms, REG_MDP5_DISP_INTF_SEL);
goto fail;
}
- /* NOTE: the vsync and error irq's are actually associated with
- * the INTF/encoder.. the easiest way to deal with this (ie. what
- * we do now) is assume a fixed relationship between crtc's and
- * encoders. I'm not sure if there is ever a need to more freely
- * assign crtcs to encoders, but if there is then we need to take
- * care of error and vblank irq's that the crtc has registered,
- * and also update user-requested vblank_mask.
- */
- encoder->possible_crtcs = BIT(0);
- mdp5_crtc_set_intf(priv->crtcs[0], 3, INTF_HDMI);
-
+ encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;;
priv->encoders[priv->num_encoders++] = encoder;
/* Construct bridge/connector for HDMI: */
mdp_kms->funcs->set_irqmask(mdp_kms, irqmask);
}
-static void update_irq_unlocked(struct mdp_kms *mdp_kms)
+/* if an mdp_irq's irqmask has changed, such as when mdp5 crtc<->encoder
+ * link changes, this must be called to figure out the new global irqmask
+ */
+void mdp_irq_update(struct mdp_kms *mdp_kms)
{
unsigned long flags;
spin_lock_irqsave(&list_lock, flags);
spin_unlock_irqrestore(&list_lock, flags);
if (needs_update)
- update_irq_unlocked(mdp_kms);
+ mdp_irq_update(mdp_kms);
}
void mdp_irq_unregister(struct mdp_kms *mdp_kms, struct mdp_irq *irq)
spin_unlock_irqrestore(&list_lock, flags);
if (needs_update)
- update_irq_unlocked(mdp_kms);
+ mdp_irq_update(mdp_kms);
}
void mdp_irq_wait(struct mdp_kms *mdp_kms, uint32_t irqmask);
void mdp_irq_register(struct mdp_kms *mdp_kms, struct mdp_irq *irq);
void mdp_irq_unregister(struct mdp_kms *mdp_kms, struct mdp_irq *irq);
-
+void mdp_irq_update(struct mdp_kms *mdp_kms);
/*
* pixel format helpers:
struct drm_atomic_state *state;
uint32_t fence;
struct msm_fence_cb fence_cb;
+ uint32_t crtc_mask;
};
static void fence_cb(struct msm_fence_cb *cb);
+/* block until specified crtcs are no longer pending update, and
+ * atomically mark them as pending update
+ */
+static int start_atomic(struct msm_drm_private *priv, uint32_t crtc_mask)
+{
+ int ret;
+
+ spin_lock(&priv->pending_crtcs_event.lock);
+ ret = wait_event_interruptible_locked(priv->pending_crtcs_event,
+ !(priv->pending_crtcs & crtc_mask));
+ if (ret == 0) {
+ DBG("start: %08x", crtc_mask);
+ priv->pending_crtcs |= crtc_mask;
+ }
+ spin_unlock(&priv->pending_crtcs_event.lock);
+
+ return ret;
+}
+
+/* clear specified crtcs (no longer pending update)
+ */
+static void end_atomic(struct msm_drm_private *priv, uint32_t crtc_mask)
+{
+ spin_lock(&priv->pending_crtcs_event.lock);
+ DBG("end: %08x", crtc_mask);
+ priv->pending_crtcs &= ~crtc_mask;
+ wake_up_all_locked(&priv->pending_crtcs_event);
+ spin_unlock(&priv->pending_crtcs_event.lock);
+}
+
static struct msm_commit *new_commit(struct drm_atomic_state *state)
{
struct msm_commit *c = kzalloc(sizeof(*c), GFP_KERNEL);
drm_atomic_helper_commit_post_planes(dev, state);
+ /* NOTE: _wait_for_vblanks() only waits for vblank on
+ * enabled CRTCs. So we end up faulting when disabling
+ * due to (potentially) unref'ing the outgoing fb's
+ * before the vblank when the disable has latched.
+ *
+ * But if it did wait on disabled (or newly disabled)
+ * CRTCs, that would be racy (ie. we could have missed
+ * the irq. We need some way to poll for pipe shut
+ * down. Or just live with occasionally hitting the
+ * timeout in the CRTC disable path (which really should
+ * not be critical path)
+ */
+
drm_atomic_helper_wait_for_vblanks(dev, state);
drm_atomic_helper_cleanup_planes(dev, state);
drm_atomic_state_free(state);
+ end_atomic(dev->dev_private, c->crtc_mask);
+
kfree(c);
}
int msm_atomic_commit(struct drm_device *dev,
struct drm_atomic_state *state, bool async)
{
- struct msm_commit *c;
int nplanes = dev->mode_config.num_total_plane;
+ int ncrtcs = dev->mode_config.num_crtc;
+ struct msm_commit *c;
int i, ret;
ret = drm_atomic_helper_prepare_planes(dev, state);
return ret;
c = new_commit(state);
+ if (!c)
+ return -ENOMEM;
+
+ /*
+ * Figure out what crtcs we have:
+ */
+ for (i = 0; i < ncrtcs; i++) {
+ struct drm_crtc *crtc = state->crtcs[i];
+ if (!crtc)
+ continue;
+ c->crtc_mask |= (1 << drm_crtc_index(crtc));
+ }
/*
* Figure out what fence to wait for:
add_fb(c, new_state->fb);
}
+ /*
+ * Wait for pending updates on any of the same crtc's and then
+ * mark our set of crtc's as busy:
+ */
+ ret = start_atomic(dev->dev_private, c->crtc_mask);
+ if (ret)
+ return ret;
+
/*
* This is the point of no return - everything below never fails except
* when the hw goes bonghits. Which means we can commit the new state on
priv->wq = alloc_ordered_workqueue("msm", 0);
init_waitqueue_head(&priv->fence_event);
+ init_waitqueue_head(&priv->pending_crtcs_event);
INIT_LIST_HEAD(&priv->inactive_list);
INIT_LIST_HEAD(&priv->fence_cbs);
/* callbacks deferred until bo is inactive: */
struct list_head fence_cbs;
+ /* crtcs pending async atomic updates: */
+ uint32_t pending_crtcs;
+ wait_queue_head_t pending_crtcs_event;
+
/* registered MMUs: */
unsigned int num_mmus;
struct msm_mmu *mmus[NUM_DOMAINS];
fail:
if (ret) {
- if (fbi)
- framebuffer_release(fbi);
+ framebuffer_release(fbi);
if (fb) {
drm_framebuffer_unregister_private(fb);
drm_framebuffer_remove(fb);
drm_free_large(msm_obj->pages);
} else {
- if (msm_obj->vaddr)
- vunmap(msm_obj->vaddr);
+ vunmap(msm_obj->vaddr);
put_pages(obj);
}
void
nvkm_event_put(struct nvkm_event *event, u32 types, int index)
{
- BUG_ON(!spin_is_locked(&event->refs_lock));
+ assert_spin_locked(&event->refs_lock);
while (types) {
int type = __ffs(types); types &= ~(1 << type);
if (--event->refs[index * event->types_nr + type] == 0) {
void
nvkm_event_get(struct nvkm_event *event, u32 types, int index)
{
- BUG_ON(!spin_is_locked(&event->refs_lock));
+ assert_spin_locked(&event->refs_lock);
while (types) {
int type = __ffs(types); types &= ~(1 << type);
if (++event->refs[index * event->types_nr + type] == 1) {
struct nvkm_event *event = notify->event;
unsigned long flags;
- BUG_ON(!spin_is_locked(&event->list_lock));
+ assert_spin_locked(&event->list_lock);
BUG_ON(size != notify->size);
spin_lock_irqsave(&event->refs_lock, flags);
device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass;
device->oclass[NVDEV_ENGINE_PERFMON] = &nvf0_perfmon_oclass;
break;
+ case 0x106:
+ device->cname = "GK208B";
+ device->oclass[NVDEV_SUBDEV_VBIOS ] = &nouveau_bios_oclass;
+ device->oclass[NVDEV_SUBDEV_GPIO ] = nve0_gpio_oclass;
+ device->oclass[NVDEV_SUBDEV_I2C ] = nve0_i2c_oclass;
+ device->oclass[NVDEV_SUBDEV_FUSE ] = &gf100_fuse_oclass;
+ device->oclass[NVDEV_SUBDEV_CLOCK ] = &nve0_clock_oclass;
+ device->oclass[NVDEV_SUBDEV_THERM ] = &nvd0_therm_oclass;
+ device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
+ device->oclass[NVDEV_SUBDEV_DEVINIT] = nvc0_devinit_oclass;
+ device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass;
+ device->oclass[NVDEV_SUBDEV_BUS ] = nvc0_bus_oclass;
+ device->oclass[NVDEV_SUBDEV_TIMER ] = &nv04_timer_oclass;
+ device->oclass[NVDEV_SUBDEV_FB ] = nve0_fb_oclass;
+ device->oclass[NVDEV_SUBDEV_LTC ] = gk104_ltc_oclass;
+ device->oclass[NVDEV_SUBDEV_IBUS ] = &nve0_ibus_oclass;
+ device->oclass[NVDEV_SUBDEV_INSTMEM] = nv50_instmem_oclass;
+ device->oclass[NVDEV_SUBDEV_VM ] = &nvc0_vmmgr_oclass;
+ device->oclass[NVDEV_SUBDEV_BAR ] = &nvc0_bar_oclass;
+ device->oclass[NVDEV_SUBDEV_PWR ] = nv108_pwr_oclass;
+ device->oclass[NVDEV_SUBDEV_VOLT ] = &nv40_volt_oclass;
+ device->oclass[NVDEV_ENGINE_DMAOBJ ] = nvd0_dmaeng_oclass;
+ device->oclass[NVDEV_ENGINE_FIFO ] = nv108_fifo_oclass;
+ device->oclass[NVDEV_ENGINE_SW ] = nvc0_software_oclass;
+ device->oclass[NVDEV_ENGINE_GR ] = nv108_graph_oclass;
+ device->oclass[NVDEV_ENGINE_DISP ] = nvf0_disp_oclass;
+ device->oclass[NVDEV_ENGINE_COPY0 ] = &nve0_copy0_oclass;
+ device->oclass[NVDEV_ENGINE_COPY1 ] = &nve0_copy1_oclass;
+ device->oclass[NVDEV_ENGINE_COPY2 ] = &nve0_copy2_oclass;
+ device->oclass[NVDEV_ENGINE_BSP ] = &nve0_bsp_oclass;
+ device->oclass[NVDEV_ENGINE_VP ] = &nve0_vp_oclass;
+ device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass;
+ break;
case 0x108:
device->cname = "GK208";
device->oclass[NVDEV_SUBDEV_VBIOS ] = &nouveau_bios_oclass;
pramin_fini(void *data)
{
struct priv *priv = data;
- nv_wr32(priv->bios, 0x001700, priv->bar0);
- kfree(priv);
+ if (priv) {
+ nv_wr32(priv->bios, 0x001700, priv->bar0);
+ kfree(priv);
+ }
}
static void *
#include "nv50.h"
+struct nvaa_ram_priv {
+ struct nouveau_ram base;
+ u64 poller_base;
+};
+
static int
nvaa_ram_ctor(struct nouveau_object *parent, struct nouveau_object *engine,
struct nouveau_oclass *oclass, void *data, u32 datasize,
struct nouveau_object **pobject)
{
- const u32 rsvd_head = ( 256 * 1024) >> 12; /* vga memory */
- const u32 rsvd_tail = (1024 * 1024) >> 12; /* vbios etc */
+ u32 rsvd_head = ( 256 * 1024); /* vga memory */
+ u32 rsvd_tail = (1024 * 1024); /* vbios etc */
struct nouveau_fb *pfb = nouveau_fb(parent);
- struct nouveau_ram *ram;
+ struct nvaa_ram_priv *priv;
int ret;
- ret = nouveau_ram_create(parent, engine, oclass, &ram);
- *pobject = nv_object(ram);
+ ret = nouveau_ram_create(parent, engine, oclass, &priv);
+ *pobject = nv_object(priv);
if (ret)
return ret;
- ram->size = nv_rd32(pfb, 0x10020c);
- ram->size = (ram->size & 0xffffff00) | ((ram->size & 0x000000ff) << 32);
+ priv->base.type = NV_MEM_TYPE_STOLEN;
+ priv->base.stolen = (u64)nv_rd32(pfb, 0x100e10) << 12;
+ priv->base.size = (u64)nv_rd32(pfb, 0x100e14) << 12;
- ret = nouveau_mm_init(&pfb->vram, rsvd_head, (ram->size >> 12) -
- (rsvd_head + rsvd_tail), 1);
+ rsvd_tail += 0x1000;
+ priv->poller_base = priv->base.size - rsvd_tail;
+
+ ret = nouveau_mm_init(&pfb->vram, rsvd_head >> 12,
+ (priv->base.size - (rsvd_head + rsvd_tail)) >> 12,
+ 1);
if (ret)
return ret;
- ram->type = NV_MEM_TYPE_STOLEN;
- ram->stolen = (u64)nv_rd32(pfb, 0x100e10) << 12;
- ram->get = nv50_ram_get;
- ram->put = nv50_ram_put;
+ priv->base.get = nv50_ram_get;
+ priv->base.put = nv50_ram_put;
+ return 0;
+}
+
+static int
+nvaa_ram_init(struct nouveau_object *object)
+{
+ struct nouveau_fb *pfb = nouveau_fb(object);
+ struct nvaa_ram_priv *priv = (void *)object;
+ int ret;
+ u64 dniso, hostnb, flush;
+
+ ret = nouveau_ram_init(&priv->base);
+ if (ret)
+ return ret;
+
+ dniso = ((priv->base.size - (priv->poller_base + 0x00)) >> 5) - 1;
+ hostnb = ((priv->base.size - (priv->poller_base + 0x20)) >> 5) - 1;
+ flush = ((priv->base.size - (priv->poller_base + 0x40)) >> 5) - 1;
+
+ /* Enable NISO poller for various clients and set their associated
+ * read address, only for MCP77/78 and MCP79/7A. (fd#25701)
+ */
+ nv_wr32(pfb, 0x100c18, dniso);
+ nv_mask(pfb, 0x100c14, 0x00000000, 0x00000001);
+ nv_wr32(pfb, 0x100c1c, hostnb);
+ nv_mask(pfb, 0x100c14, 0x00000000, 0x00000002);
+ nv_wr32(pfb, 0x100c24, flush);
+ nv_mask(pfb, 0x100c14, 0x00000000, 0x00010000);
+
return 0;
}
.ofuncs = &(struct nouveau_ofuncs) {
.ctor = nvaa_ram_ctor,
.dtor = _nouveau_ram_dtor,
- .init = _nouveau_ram_init,
+ .init = nvaa_ram_init,
.fini = _nouveau_ram_fini,
},
};
#include "nv04.h"
-static void
-nv4c_mc_msi_rearm(struct nouveau_mc *pmc)
-{
- struct nv04_mc_priv *priv = (void *)pmc;
- nv_wr08(priv, 0x088050, 0xff);
-}
-
struct nouveau_oclass *
nv4c_mc_oclass = &(struct nouveau_mc_oclass) {
.base.handle = NV_SUBDEV(MC, 0x4c),
.fini = _nouveau_mc_fini,
},
.intr = nv04_mc_intr,
- .msi_rearm = nv4c_mc_msi_rearm,
}.base;
* so use the DMA API for them.
*/
if (!nv_device_is_cpu_coherent(device) &&
- ttm->caching_state == tt_uncached)
+ ttm->caching_state == tt_uncached) {
ttm_dma_unpopulate(ttm_dma, dev->dev);
+ return;
+ }
#if __OS_HAS_AGP
if (drm->agp.stat == ENABLED) {
if (ret)
return ret;
- bo->gem.dumb = true;
ret = drm_gem_handle_create(file_priv, &bo->gem, &args->handle);
drm_gem_object_unreference_unlocked(&bo->gem);
return ret;
gem = drm_gem_object_lookup(dev, file_priv, handle);
if (gem) {
struct nouveau_bo *bo = nouveau_gem_object(gem);
-
- /*
- * We don't allow dumb mmaps on objects created using another
- * interface.
- */
- WARN_ONCE(!(gem->dumb || gem->import_attach),
- "Illegal dumb map of accelerated buffer.\n");
-
*poffset = drm_vma_node_offset_addr(&bo->bo.vma_node);
drm_gem_object_unreference_unlocked(gem);
return 0;
nouveau_gem_object_del(struct drm_gem_object *gem)
{
struct nouveau_bo *nvbo = nouveau_gem_object(gem);
+ struct nouveau_drm *drm = nouveau_bdev(nvbo->bo.bdev);
struct ttm_buffer_object *bo = &nvbo->bo;
+ struct device *dev = drm->dev->dev;
+ int ret;
+
+ ret = pm_runtime_get_sync(dev);
+ if (WARN_ON(ret < 0 && ret != -EACCES))
+ return;
if (gem->import_attach)
drm_prime_gem_destroy(gem, nvbo->bo.sg);
/* reset filp so nouveau_bo_del_ttm() can test for it */
gem->filp = NULL;
ttm_bo_unref(&bo);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
}
int
{
struct nouveau_cli *cli = nouveau_cli(file_priv);
struct nouveau_bo *nvbo = nouveau_gem_object(gem);
+ struct nouveau_drm *drm = nouveau_bdev(nvbo->bo.bdev);
struct nouveau_vma *vma;
+ struct device *dev = drm->dev->dev;
int ret;
if (!cli->vm)
goto out;
}
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0 && ret != -EACCES)
+ goto out;
+
ret = nouveau_bo_vma_add(nvbo, cli->vm, vma);
- if (ret) {
+ if (ret)
kfree(vma);
- goto out;
- }
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
} else {
vma->refcount++;
}
{
struct nouveau_cli *cli = nouveau_cli(file_priv);
struct nouveau_bo *nvbo = nouveau_gem_object(gem);
+ struct nouveau_drm *drm = nouveau_bdev(nvbo->bo.bdev);
+ struct device *dev = drm->dev->dev;
struct nouveau_vma *vma;
int ret;
vma = nouveau_bo_vma_find(nvbo, cli->vm);
if (vma) {
- if (--vma->refcount == 0)
- nouveau_gem_object_unmap(nvbo, vma);
+ if (--vma->refcount == 0) {
+ ret = pm_runtime_get_sync(dev);
+ if (!WARN_ON(ret < 0 && ret != -EACCES)) {
+ nouveau_gem_object_unmap(nvbo, vma);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+ }
+ }
}
ttm_bo_unreserve(&nvbo->bo);
}
list_for_each_entry(nvbo, list, entry) {
struct drm_nouveau_gem_pushbuf_bo *b = &pbbo[nvbo->pbbo_index];
- WARN_ONCE(nvbo->gem.dumb,
- "GPU use of dumb buffer is illegal.\n");
-
ret = nouveau_gem_set_domain(&nvbo->gem, b->read_domains,
b->write_domains,
b->valid_domains);
#include "nouveau_ttm.h"
#include "nouveau_gem.h"
+#include "drm_legacy.h"
static int
nouveau_vram_manager_init(struct ttm_mem_type_manager *man, unsigned long psize)
{
struct nouveau_drm *drm = nouveau_drm(file_priv->minor->dev);
if (unlikely(vma->vm_pgoff < DRM_FILE_PAGE_OFFSET))
- return -EINVAL;
+ return drm_legacy_mmap(filp, vma);
return ttm_bo_mmap(filp, vma, &drm->ttm.bdev);
}
return pll;
}
/* otherwise, pick one of the plls */
- if ((rdev->family == CHIP_KAVERI) ||
- (rdev->family == CHIP_KABINI) ||
+ if ((rdev->family == CHIP_KABINI) ||
(rdev->family == CHIP_MULLINS)) {
- /* KB/KV/ML has PPLL1 and PPLL2 */
+ /* KB/ML has PPLL1 and PPLL2 */
pll_in_use = radeon_get_pll_use_mask(crtc);
if (!(pll_in_use & (1 << ATOM_PPLL2)))
return ATOM_PPLL2;
DRM_ERROR("unable to allocate a PPLL\n");
return ATOM_PPLL_INVALID;
} else {
- /* CI has PPLL0, PPLL1, and PPLL2 */
+ /* CI/KV has PPLL0, PPLL1, and PPLL2 */
pll_in_use = radeon_get_pll_use_mask(crtc);
if (!(pll_in_use & (1 << ATOM_PPLL2)))
return ATOM_PPLL2;
case ATOM_PPLL0:
/* disable the ppll */
if ((rdev->family == CHIP_ARUBA) ||
+ (rdev->family == CHIP_KAVERI) ||
(rdev->family == CHIP_BONAIRE) ||
(rdev->family == CHIP_HAWAII))
atombios_crtc_program_pll(crtc, radeon_crtc->crtc_id, radeon_crtc->pll_id,
struct radeon_connector_atom_dig *dig_connector;
int dp_clock;
+ if ((mode->clock > 340000) &&
+ (!radeon_connector_is_dp12_capable(connector)))
+ return MODE_CLOCK_HIGH;
+
if (!radeon_connector->con_priv)
return MODE_CLOCK_HIGH;
dig_connector = radeon_connector->con_priv;
#define ATC_VM_APERTURE1_HIGH_ADDR 0x330Cu
#define ATC_VM_APERTURE1_LOW_ADDR 0x3304u
+#define IH_VMID_0_LUT 0x3D40u
+
#endif
}
sad_count = drm_edid_to_sad(radeon_connector->edid, &sads);
- if (sad_count < 0) {
+ if (sad_count <= 0) {
DRM_ERROR("Couldn't read SADs: %d\n", sad_count);
return;
}
pi->enable_auto_thermal_throttling = true;
pi->disable_nb_ps3_in_battery = false;
if (radeon_bapm == -1) {
- /* There are stability issues reported on with
- * bapm enabled on an asrock system.
- */
- if (rdev->pdev->subsystem_vendor == 0x1849)
- pi->bapm_enable = false;
- else
+ /* only enable bapm on KB, ML by default */
+ if (rdev->family == CHIP_KABINI || rdev->family == CHIP_MULLINS)
pi->bapm_enable = true;
+ else
+ pi->bapm_enable = false;
} else if (radeon_bapm == 0) {
pi->bapm_enable = false;
} else {
return r;
}
-static int radeon_mode_mmap(struct drm_file *filp,
- struct drm_device *dev,
- uint32_t handle, bool dumb,
- uint64_t *offset_p)
+int radeon_mode_dumb_mmap(struct drm_file *filp,
+ struct drm_device *dev,
+ uint32_t handle, uint64_t *offset_p)
{
struct drm_gem_object *gobj;
struct radeon_bo *robj;
if (gobj == NULL) {
return -ENOENT;
}
-
- /*
- * We don't allow dumb mmaps on objects created using another
- * interface.
- */
- WARN_ONCE(dumb && !(gobj->dumb || gobj->import_attach),
- "Illegal dumb map of GPU buffer.\n");
-
robj = gem_to_radeon_bo(gobj);
if (radeon_ttm_tt_has_userptr(robj->tbo.ttm)) {
drm_gem_object_unreference_unlocked(gobj);
return 0;
}
-int radeon_mode_dumb_mmap(struct drm_file *filp,
- struct drm_device *dev,
- uint32_t handle, uint64_t *offset_p)
-{
- return radeon_mode_mmap(filp, dev, handle, true, offset_p);
-}
-
int radeon_gem_mmap_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
{
struct drm_radeon_gem_mmap *args = data;
- return radeon_mode_mmap(filp, dev, args->handle, false,
- &args->addr_ptr);
+ return radeon_mode_dumb_mmap(filp, dev, args->handle, &args->addr_ptr);
}
int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
return -ENOMEM;
r = drm_gem_handle_create(file_priv, gobj, &handle);
- gobj->dumb = true;
/* drop reference from allocate - handle holds it now */
drm_gem_object_unreference_unlocked(gobj);
if (r) {
#include "cikd.h"
#include "cik_reg.h"
#include "radeon_kfd.h"
+#include "radeon_ucode.h"
+#include <linux/firmware.h>
#define CIK_PIPE_PER_MEC (4)
static uint64_t get_gpu_clock_counter(struct kgd_dev *kgd);
static uint32_t get_max_engine_clock_in_mhz(struct kgd_dev *kgd);
+static uint16_t get_fw_version(struct kgd_dev *kgd, enum kgd_engine_type type);
/*
* Register access functions
static int kgd_hqd_load(struct kgd_dev *kgd, void *mqd, uint32_t pipe_id,
uint32_t queue_id, uint32_t __user *wptr);
-static bool kgd_hqd_is_occupies(struct kgd_dev *kgd, uint64_t queue_address,
+static bool kgd_hqd_is_occupied(struct kgd_dev *kgd, uint64_t queue_address,
uint32_t pipe_id, uint32_t queue_id);
static int kgd_hqd_destroy(struct kgd_dev *kgd, uint32_t reset_type,
.init_memory = kgd_init_memory,
.init_pipeline = kgd_init_pipeline,
.hqd_load = kgd_hqd_load,
- .hqd_is_occupies = kgd_hqd_is_occupies,
+ .hqd_is_occupied = kgd_hqd_is_occupied,
.hqd_destroy = kgd_hqd_destroy,
+ .get_fw_version = get_fw_version
};
static const struct kgd2kfd_calls *kgd2kfd;
bool radeon_kfd_init(void)
{
+#if defined(CONFIG_HSA_AMD_MODULE)
bool (*kgd2kfd_init_p)(unsigned, const struct kfd2kgd_calls*,
const struct kgd2kfd_calls**);
}
return true;
+#elif defined(CONFIG_HSA_AMD)
+ if (!kgd2kfd_init(KFD_INTERFACE_VERSION, &kfd2kgd, &kgd2kfd)) {
+ kgd2kfd = NULL;
+
+ return false;
+ }
+
+ return true;
+#else
+ return false;
+#endif
}
void radeon_kfd_fini(void)
cpu_relax();
write_register(kgd, ATC_VMID_PASID_MAPPING_UPDATE_STATUS, 1U << vmid);
+ /* Mapping vmid to pasid also for IH block */
+ write_register(kgd, IH_VMID_0_LUT + vmid * sizeof(uint32_t),
+ pasid_mapping);
+
return 0;
}
return 0;
}
-static bool kgd_hqd_is_occupies(struct kgd_dev *kgd, uint64_t queue_address,
+static bool kgd_hqd_is_occupied(struct kgd_dev *kgd, uint64_t queue_address,
uint32_t pipe_id, uint32_t queue_id)
{
uint32_t act;
if (timeout == 0) {
pr_err("kfd: cp queue preemption time out (%dms)\n",
temp);
+ release_queue(kgd);
return -ETIME;
}
msleep(20);
release_queue(kgd);
return 0;
}
+
+static uint16_t get_fw_version(struct kgd_dev *kgd, enum kgd_engine_type type)
+{
+ struct radeon_device *rdev = (struct radeon_device *) kgd;
+ const union radeon_firmware_header *hdr;
+
+ BUG_ON(kgd == NULL || rdev->mec_fw == NULL);
+
+ switch (type) {
+ case KGD_ENGINE_PFP:
+ hdr = (const union radeon_firmware_header *) rdev->pfp_fw->data;
+ break;
+
+ case KGD_ENGINE_ME:
+ hdr = (const union radeon_firmware_header *) rdev->me_fw->data;
+ break;
+
+ case KGD_ENGINE_CE:
+ hdr = (const union radeon_firmware_header *) rdev->ce_fw->data;
+ break;
+
+ case KGD_ENGINE_MEC1:
+ hdr = (const union radeon_firmware_header *) rdev->mec_fw->data;
+ break;
+
+ case KGD_ENGINE_MEC2:
+ hdr = (const union radeon_firmware_header *)
+ rdev->mec2_fw->data;
+ break;
+
+ case KGD_ENGINE_RLC:
+ hdr = (const union radeon_firmware_header *) rdev->rlc_fw->data;
+ break;
+
+ case KGD_ENGINE_SDMA:
+ hdr = (const union radeon_firmware_header *)
+ rdev->sdma_fw->data;
+ break;
+
+ default:
+ return 0;
+ }
+
+ if (hdr == NULL)
+ return 0;
+
+ /* Only 12 bit in use*/
+ return hdr->common.ucode_version;
+}
u32 current_domain =
radeon_mem_type_to_domain(bo->tbo.mem.mem_type);
- WARN_ONCE(bo->gem_base.dumb,
- "GPU use of dumb buffer is illegal.\n");
-
/* Check if this buffer will be moved and don't move it
* if we have moved too many buffers for this IB already.
*
u32 format;
u32 *buffer;
const u8 __user *data;
- int size, dwords, tex_width, blit_width, spitch;
+ unsigned int size, dwords, tex_width, blit_width, spitch;
u32 height;
int i;
u32 texpitch, microtile;
const struct tegra_dc_window *window)
{
unsigned h_offset, v_offset, h_size, v_size, h_dda, v_dda, bpp;
- unsigned long value;
+ unsigned long value, flags;
bool yuv, planar;
/*
else
bpp = planar ? 1 : 2;
+ spin_lock_irqsave(&dc->lock, flags);
+
value = WINDOW_A_SELECT << index;
tegra_dc_writel(dc, value, DC_CMD_DISPLAY_WINDOW_HEADER);
case TEGRA_BO_TILING_MODE_BLOCK:
DRM_ERROR("hardware doesn't support block linear mode\n");
+ spin_unlock_irqrestore(&dc->lock, flags);
return -EINVAL;
}
tegra_dc_window_commit(dc, index);
+ spin_unlock_irqrestore(&dc->lock, flags);
+
return 0;
}
{
struct tegra_dc *dc = to_tegra_dc(plane->crtc);
struct tegra_plane *p = to_tegra_plane(plane);
+ unsigned long flags;
u32 value;
if (!plane->crtc)
return 0;
+ spin_lock_irqsave(&dc->lock, flags);
+
value = WINDOW_A_SELECT << p->index;
tegra_dc_writel(dc, value, DC_CMD_DISPLAY_WINDOW_HEADER);
tegra_dc_window_commit(dc, p->index);
+ spin_unlock_irqrestore(&dc->lock, flags);
+
return 0;
}
struct tegra_bo *bo = tegra_fb_get_plane(fb, 0);
unsigned int h_offset = 0, v_offset = 0;
struct tegra_bo_tiling tiling;
+ unsigned long value, flags;
unsigned int format, swap;
- unsigned long value;
int err;
err = tegra_fb_get_tiling(fb, &tiling);
if (err < 0)
return err;
+ spin_lock_irqsave(&dc->lock, flags);
+
tegra_dc_writel(dc, WINDOW_A_SELECT, DC_CMD_DISPLAY_WINDOW_HEADER);
value = fb->offsets[0] + y * fb->pitches[0] +
case TEGRA_BO_TILING_MODE_BLOCK:
DRM_ERROR("hardware doesn't support block linear mode\n");
+ spin_unlock_irqrestore(&dc->lock, flags);
return -EINVAL;
}
tegra_dc_writel(dc, value << 8, DC_CMD_STATE_CONTROL);
tegra_dc_writel(dc, value, DC_CMD_STATE_CONTROL);
+ spin_unlock_irqrestore(&dc->lock, flags);
+
return 0;
}
unsigned long flags, base;
struct tegra_bo *bo;
- if (!dc->event)
+ spin_lock_irqsave(&drm->event_lock, flags);
+
+ if (!dc->event) {
+ spin_unlock_irqrestore(&drm->event_lock, flags);
return;
+ }
bo = tegra_fb_get_plane(crtc->primary->fb, 0);
+ spin_lock_irqsave(&dc->lock, flags);
+
/* check if new start address has been latched */
+ tegra_dc_writel(dc, WINDOW_A_SELECT, DC_CMD_DISPLAY_WINDOW_HEADER);
tegra_dc_writel(dc, READ_MUX, DC_CMD_STATE_ACCESS);
base = tegra_dc_readl(dc, DC_WINBUF_START_ADDR);
tegra_dc_writel(dc, 0, DC_CMD_STATE_ACCESS);
+ spin_unlock_irqrestore(&dc->lock, flags);
+
if (base == bo->paddr + crtc->primary->fb->offsets[0]) {
- spin_lock_irqsave(&drm->event_lock, flags);
- drm_send_vblank_event(drm, dc->pipe, dc->event);
- drm_vblank_put(drm, dc->pipe);
+ drm_crtc_send_vblank_event(crtc, dc->event);
+ drm_crtc_vblank_put(crtc);
dc->event = NULL;
- spin_unlock_irqrestore(&drm->event_lock, flags);
}
+
+ spin_unlock_irqrestore(&drm->event_lock, flags);
}
void tegra_dc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file)
if (dc->event && dc->event->base.file_priv == file) {
dc->event->base.destroy(&dc->event->base);
- drm_vblank_put(drm, dc->pipe);
+ drm_crtc_vblank_put(crtc);
dc->event = NULL;
}
static int tegra_dc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event, uint32_t page_flip_flags)
{
+ unsigned int pipe = drm_crtc_index(crtc);
struct tegra_dc *dc = to_tegra_dc(crtc);
- struct drm_device *drm = crtc->dev;
if (dc->event)
return -EBUSY;
if (event) {
- event->pipe = dc->pipe;
+ event->pipe = pipe;
dc->event = event;
- drm_vblank_get(drm, dc->pipe);
+ drm_crtc_vblank_get(crtc);
}
tegra_dc_set_base(dc, 0, 0, fb);
/*
dev_dbg(dc->dev, "%s(): vertical blank\n", __func__);
*/
- drm_handle_vblank(dc->base.dev, dc->pipe);
+ drm_crtc_handle_vblank(&dc->base);
tegra_dc_finish_page_flip(dc);
}
.llseek = noop_llseek,
};
-static struct drm_crtc *tegra_crtc_from_pipe(struct drm_device *drm, int pipe)
+static struct drm_crtc *tegra_crtc_from_pipe(struct drm_device *drm,
+ unsigned int pipe)
{
struct drm_crtc *crtc;
list_for_each_entry(crtc, &drm->mode_config.crtc_list, head) {
- struct tegra_dc *dc = to_tegra_dc(crtc);
-
- if (dc->pipe == pipe)
+ if (pipe == drm_crtc_index(crtc))
return crtc;
}
return NULL;
}
-static u32 tegra_drm_get_vblank_counter(struct drm_device *dev, int crtc)
+static u32 tegra_drm_get_vblank_counter(struct drm_device *drm, int pipe)
{
+ struct drm_crtc *crtc = tegra_crtc_from_pipe(drm, pipe);
+
+ if (!crtc)
+ return 0;
+
/* TODO: implement real hardware counter using syncpoints */
- return drm_vblank_count(dev, crtc);
+ return drm_crtc_vblank_count(crtc);
}
static int tegra_drm_enable_vblank(struct drm_device *drm, int pipe)
}
}
-static int tegra_bo_get_pages(struct drm_device *drm, struct tegra_bo *bo,
- size_t size)
+static int tegra_bo_get_pages(struct drm_device *drm, struct tegra_bo *bo)
{
+ struct scatterlist *s;
+ struct sg_table *sgt;
+ unsigned int i;
+
bo->pages = drm_gem_get_pages(&bo->gem);
if (IS_ERR(bo->pages))
return PTR_ERR(bo->pages);
- bo->num_pages = size >> PAGE_SHIFT;
-
- bo->sgt = drm_prime_pages_to_sg(bo->pages, bo->num_pages);
- if (IS_ERR(bo->sgt)) {
- drm_gem_put_pages(&bo->gem, bo->pages, false, false);
- return PTR_ERR(bo->sgt);
+ bo->num_pages = bo->gem.size >> PAGE_SHIFT;
+
+ sgt = drm_prime_pages_to_sg(bo->pages, bo->num_pages);
+ if (IS_ERR(sgt))
+ goto put_pages;
+
+ /*
+ * Fake up the SG table so that dma_map_sg() can be used to flush the
+ * pages associated with it. Note that this relies on the fact that
+ * the DMA API doesn't hook into IOMMU on Tegra, therefore mapping is
+ * only cache maintenance.
+ *
+ * TODO: Replace this by drm_clflash_sg() once it can be implemented
+ * without relying on symbols that are not exported.
+ */
+ for_each_sg(sgt->sgl, s, sgt->nents, i)
+ sg_dma_address(s) = sg_phys(s);
+
+ if (dma_map_sg(drm->dev, sgt->sgl, sgt->nents, DMA_TO_DEVICE) == 0) {
+ sgt = ERR_PTR(-ENOMEM);
+ goto release_sgt;
}
+ bo->sgt = sgt;
+
return 0;
+
+release_sgt:
+ sg_free_table(sgt);
+ kfree(sgt);
+put_pages:
+ drm_gem_put_pages(&bo->gem, bo->pages, false, false);
+ return PTR_ERR(sgt);
}
-static int tegra_bo_alloc(struct drm_device *drm, struct tegra_bo *bo,
- size_t size)
+static int tegra_bo_alloc(struct drm_device *drm, struct tegra_bo *bo)
{
struct tegra_drm *tegra = drm->dev_private;
int err;
if (tegra->domain) {
- err = tegra_bo_get_pages(drm, bo, size);
+ err = tegra_bo_get_pages(drm, bo);
if (err < 0)
return err;
return err;
}
} else {
+ size_t size = bo->gem.size;
+
bo->vaddr = dma_alloc_writecombine(drm->dev, size, &bo->paddr,
GFP_KERNEL | __GFP_NOWARN);
if (!bo->vaddr) {
if (IS_ERR(bo))
return bo;
- err = tegra_bo_alloc(drm, bo, size);
+ err = tegra_bo_alloc(drm, bo);
if (err < 0)
goto release;
config HID_BATTERY_STRENGTH
bool "Battery level reporting for HID devices"
- depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY
+ depends on HID
+ select POWER_SUPPLY
default n
---help---
This option adds support of reporting battery strength (for HID devices
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) },
#define USB_DEVICE_ID_KYE_GPEN_560 0x5003
#define USB_DEVICE_ID_KYE_EASYPEN_I405X 0x5010
#define USB_DEVICE_ID_KYE_MOUSEPEN_I608X 0x5011
+#define USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2 0x501a
#define USB_DEVICE_ID_KYE_EASYPEN_M610X 0x5013
#define USB_VENDOR_ID_LABTEC 0x1020
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI),
HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
+ USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO),
+ HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
}
break;
case USB_DEVICE_ID_KYE_MOUSEPEN_I608X:
+ case USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2:
if (*rsize == MOUSEPEN_I608X_RDESC_ORIG_SIZE) {
rdesc = mousepen_i608x_rdesc_fixed;
*rsize = sizeof(mousepen_i608x_rdesc_fixed);
switch (id->product) {
case USB_DEVICE_ID_KYE_EASYPEN_I405X:
case USB_DEVICE_ID_KYE_MOUSEPEN_I608X:
+ case USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2:
case USB_DEVICE_ID_KYE_EASYPEN_M610X:
ret = kye_tablet_enable(hdev);
if (ret) {
USB_DEVICE_ID_KYE_EASYPEN_I405X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+ USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_KYE_EASYPEN_M610X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
switch (data[0]) {
case REPORT_ID_DJ_SHORT:
+ if (size != DJREPORT_SHORT_LENGTH) {
+ dev_err(&hdev->dev, "DJ report of bad size (%d)", size);
+ return false;
+ }
return logi_dj_dj_event(hdev, report, data, size);
case REPORT_ID_HIDPP_SHORT:
- /* intentional fallthrough */
+ if (size != HIDPP_REPORT_SHORT_LENGTH) {
+ dev_err(&hdev->dev,
+ "Short HID++ report of bad size (%d)", size);
+ return false;
+ }
+ return logi_dj_hidpp_event(hdev, report, data, size);
case REPORT_ID_HIDPP_LONG:
+ if (size != HIDPP_REPORT_LONG_LENGTH) {
+ dev_err(&hdev->dev,
+ "Long HID++ report of bad size (%d)", size);
+ return false;
+ }
return logi_dj_hidpp_event(hdev, report, data, size);
}
(report->rap.sub_id == 0x41);
}
+/**
+ * hidpp_prefix_name() prefixes the current given name with "Logitech ".
+ */
+static void hidpp_prefix_name(char **name, int name_length)
+{
+#define PREFIX_LENGTH 9 /* "Logitech " */
+
+ int new_length;
+ char *new_name;
+
+ if (name_length > PREFIX_LENGTH &&
+ strncmp(*name, "Logitech ", PREFIX_LENGTH) == 0)
+ /* The prefix has is already in the name */
+ return;
+
+ new_length = PREFIX_LENGTH + name_length;
+ new_name = kzalloc(new_length, GFP_KERNEL);
+ if (!new_name)
+ return;
+
+ snprintf(new_name, new_length, "Logitech %s", *name);
+
+ kfree(*name);
+
+ *name = new_name;
+}
+
/* -------------------------------------------------------------------------- */
/* HIDP++ 1.0 commands */
/* -------------------------------------------------------------------------- */
return NULL;
memcpy(name, &response.rap.params[2], len);
+
+ /* include the terminating '\0' */
+ hidpp_prefix_name(&name, len + 1);
+
return name;
}
index += ret;
}
+ /* include the terminating '\0' */
+ hidpp_prefix_name(&name, __name_length + 1);
+
return name;
}
switch (data[0]) {
case 0x02:
+ if (size < 2) {
+ hid_err(hdev, "Received HID report of bad size (%d)",
+ size);
+ return 1;
+ }
if (hidpp->quirks & HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS) {
input_event(wd->input, EV_KEY, BTN_LEFT,
!!(data[1] & 0x01));
input_event(wd->input, EV_KEY, BTN_RIGHT,
!!(data[1] & 0x02));
input_sync(wd->input);
+ return 0;
} else {
if (size < 21)
return 1;
return wtp_mouse_raw_xy_event(hidpp, &data[7]);
}
case REPORT_ID_HIDPP_LONG:
+ /* size is already checked in hidpp_raw_event. */
if ((report->fap.feature_index != wd->mt_feature_index) ||
(report->fap.funcindex_clientid != EVENT_TOUCHPAD_RAW_XY))
return 1;
static void profile_activated(struct pyra_device *pyra,
unsigned int new_profile)
{
+ if (new_profile >= ARRAY_SIZE(pyra->profile_settings))
+ return;
pyra->actual_profile = new_profile;
pyra->actual_cpi = pyra->profile_settings[pyra->actual_profile].y_cpi;
}
if (off != 0 || count != PYRA_SIZE_SETTINGS)
return -EINVAL;
- mutex_lock(&pyra->pyra_lock);
-
settings = (struct pyra_settings const *)buf;
+ if (settings->startup_profile >= ARRAY_SIZE(pyra->profile_settings))
+ return -EINVAL;
+
+ mutex_lock(&pyra->pyra_lock);
retval = pyra_set_settings(usb_dev, settings);
if (retval) {
static void i2c_hid_stop(struct hid_device *hid)
{
- struct i2c_client *client = hid->driver_data;
- struct i2c_hid *ihid = i2c_get_clientdata(client);
-
hid->claimed = 0;
-
- i2c_hid_free_buffers(ihid);
}
static int i2c_hid_open(struct hid_device *hid)
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_SIGMA_MICRO, USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X_2, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_DUOSENSE, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD, HID_QUIRK_NO_INIT_REPORTS },
#include <linux/cdev.h>
#include "input-compat.h"
+enum evdev_clock_type {
+ EV_CLK_REAL = 0,
+ EV_CLK_MONO,
+ EV_CLK_BOOT,
+ EV_CLK_MAX
+};
+
struct evdev {
int open;
struct input_handle handle;
struct fasync_struct *fasync;
struct evdev *evdev;
struct list_head node;
- int clkid;
+ int clk_type;
bool revoked;
unsigned int bufsize;
struct input_event buffer[];
};
+static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid)
+{
+ switch (clkid) {
+
+ case CLOCK_REALTIME:
+ client->clk_type = EV_CLK_REAL;
+ break;
+ case CLOCK_MONOTONIC:
+ client->clk_type = EV_CLK_MONO;
+ break;
+ case CLOCK_BOOTTIME:
+ client->clk_type = EV_CLK_BOOT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/* flush queued events of type @type, caller must hold client->buffer_lock */
static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
{
struct input_event ev;
ktime_t time;
- time = (client->clkid == CLOCK_MONOTONIC) ?
- ktime_get() : ktime_get_real();
+ time = client->clk_type == EV_CLK_REAL ?
+ ktime_get_real() :
+ client->clk_type == EV_CLK_MONO ?
+ ktime_get() :
+ ktime_get_boottime();
ev.time = ktime_to_timeval(time);
ev.type = EV_SYN;
static void evdev_pass_values(struct evdev_client *client,
const struct input_value *vals, unsigned int count,
- ktime_t mono, ktime_t real)
+ ktime_t *ev_time)
{
struct evdev *evdev = client->evdev;
const struct input_value *v;
if (client->revoked)
return;
- event.time = ktime_to_timeval(client->clkid == CLOCK_MONOTONIC ?
- mono : real);
+ event.time = ktime_to_timeval(ev_time[client->clk_type]);
/* Interrupts are disabled, just acquire the lock. */
spin_lock(&client->buffer_lock);
{
struct evdev *evdev = handle->private;
struct evdev_client *client;
- ktime_t time_mono, time_real;
+ ktime_t ev_time[EV_CLK_MAX];
- time_mono = ktime_get();
- time_real = ktime_mono_to_real(time_mono);
+ ev_time[EV_CLK_MONO] = ktime_get();
+ ev_time[EV_CLK_REAL] = ktime_mono_to_real(ev_time[EV_CLK_MONO]);
+ ev_time[EV_CLK_BOOT] = ktime_mono_to_any(ev_time[EV_CLK_MONO],
+ TK_OFFS_BOOT);
rcu_read_lock();
client = rcu_dereference(evdev->grab);
if (client)
- evdev_pass_values(client, vals, count, time_mono, time_real);
+ evdev_pass_values(client, vals, count, ev_time);
else
list_for_each_entry_rcu(client, &evdev->client_list, node)
- evdev_pass_values(client, vals, count,
- time_mono, time_real);
+ evdev_pass_values(client, vals, count, ev_time);
rcu_read_unlock();
}
case EVIOCSCLOCKID:
if (copy_from_user(&i, p, sizeof(unsigned int)))
return -EFAULT;
- if (i != CLOCK_MONOTONIC && i != CLOCK_REALTIME)
- return -EINVAL;
- client->clkid = i;
- return 0;
+
+ return evdev_set_clk_type(client, i);
case EVIOCGKEYCODE:
return evdev_handle_get_keycode(dev, p);
events = mt_slots + 1; /* count SYN_MT_REPORT and SYN_REPORT */
- for (i = 0; i < ABS_CNT; i++) {
- if (test_bit(i, dev->absbit)) {
- if (input_is_mt_axis(i))
- events += mt_slots;
- else
- events++;
+ if (test_bit(EV_ABS, dev->evbit)) {
+ for (i = 0; i < ABS_CNT; i++) {
+ if (test_bit(i, dev->absbit)) {
+ if (input_is_mt_axis(i))
+ events += mt_slots;
+ else
+ events++;
+ }
}
}
- for (i = 0; i < REL_CNT; i++)
- if (test_bit(i, dev->relbit))
- events++;
+ if (test_bit(EV_REL, dev->evbit)) {
+ for (i = 0; i < REL_CNT; i++)
+ if (test_bit(i, dev->relbit))
+ events++;
+ }
/* Make room for KEY and MSC events */
events += 7;
config KEYBOARD_STMPE
tristate "STMPE keypad support"
depends on MFD_STMPE
+ depends on OF
select INPUT_MATRIXKMAP
help
Say Y here if you want to use the keypad controller on STMPE I/O
struct gpio_button_data {
const struct gpio_keys_button *button;
struct input_dev *input;
- struct timer_list timer;
- struct work_struct work;
- unsigned int timer_debounce; /* in msecs */
+
+ struct timer_list release_timer;
+ unsigned int release_delay; /* in msecs, for IRQ-only buttons */
+
+ struct delayed_work work;
+ unsigned int software_debounce; /* in msecs, for GPIO-driven buttons */
+
unsigned int irq;
spinlock_t lock;
bool disabled;
{
if (!bdata->disabled) {
/*
- * Disable IRQ and possible debouncing timer.
+ * Disable IRQ and associated timer/work structure.
*/
disable_irq(bdata->irq);
- if (bdata->timer_debounce)
- del_timer_sync(&bdata->timer);
+
+ if (gpio_is_valid(bdata->button->gpio))
+ cancel_delayed_work_sync(&bdata->work);
+ else
+ del_timer_sync(&bdata->release_timer);
bdata->disabled = true;
}
static void gpio_keys_gpio_work_func(struct work_struct *work)
{
struct gpio_button_data *bdata =
- container_of(work, struct gpio_button_data, work);
+ container_of(work, struct gpio_button_data, work.work);
gpio_keys_gpio_report_event(bdata);
pm_relax(bdata->input->dev.parent);
}
-static void gpio_keys_gpio_timer(unsigned long _data)
-{
- struct gpio_button_data *bdata = (struct gpio_button_data *)_data;
-
- schedule_work(&bdata->work);
-}
-
static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)
{
struct gpio_button_data *bdata = dev_id;
if (bdata->button->wakeup)
pm_stay_awake(bdata->input->dev.parent);
- if (bdata->timer_debounce)
- mod_timer(&bdata->timer,
- jiffies + msecs_to_jiffies(bdata->timer_debounce));
- else
- schedule_work(&bdata->work);
+
+ mod_delayed_work(system_wq,
+ &bdata->work,
+ msecs_to_jiffies(bdata->software_debounce));
return IRQ_HANDLED;
}
input_event(input, EV_KEY, button->code, 1);
input_sync(input);
- if (!bdata->timer_debounce) {
+ if (!bdata->release_delay) {
input_event(input, EV_KEY, button->code, 0);
input_sync(input);
goto out;
bdata->key_pressed = true;
}
- if (bdata->timer_debounce)
- mod_timer(&bdata->timer,
- jiffies + msecs_to_jiffies(bdata->timer_debounce));
+ if (bdata->release_delay)
+ mod_timer(&bdata->release_timer,
+ jiffies + msecs_to_jiffies(bdata->release_delay));
out:
spin_unlock_irqrestore(&bdata->lock, flags);
return IRQ_HANDLED;
{
struct gpio_button_data *bdata = data;
- if (bdata->timer_debounce)
- del_timer_sync(&bdata->timer);
-
- cancel_work_sync(&bdata->work);
+ if (gpio_is_valid(bdata->button->gpio))
+ cancel_delayed_work_sync(&bdata->work);
+ else
+ del_timer_sync(&bdata->release_timer);
}
static int gpio_keys_setup_key(struct platform_device *pdev,
button->debounce_interval * 1000);
/* use timer if gpiolib doesn't provide debounce */
if (error < 0)
- bdata->timer_debounce =
+ bdata->software_debounce =
button->debounce_interval;
}
- irq = gpio_to_irq(button->gpio);
- if (irq < 0) {
- error = irq;
- dev_err(dev,
- "Unable to get irq number for GPIO %d, error %d\n",
- button->gpio, error);
- return error;
+ if (button->irq) {
+ bdata->irq = button->irq;
+ } else {
+ irq = gpio_to_irq(button->gpio);
+ if (irq < 0) {
+ error = irq;
+ dev_err(dev,
+ "Unable to get irq number for GPIO %d, error %d\n",
+ button->gpio, error);
+ return error;
+ }
+ bdata->irq = irq;
}
- bdata->irq = irq;
- INIT_WORK(&bdata->work, gpio_keys_gpio_work_func);
- setup_timer(&bdata->timer,
- gpio_keys_gpio_timer, (unsigned long)bdata);
+ INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);
isr = gpio_keys_gpio_isr;
irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
return -EINVAL;
}
- bdata->timer_debounce = button->debounce_interval;
- setup_timer(&bdata->timer,
+ bdata->release_delay = button->debounce_interval;
+ setup_timer(&bdata->release_timer,
gpio_keys_irq_timer, (unsigned long)bdata);
isr = gpio_keys_irq_isr;
input_set_capability(input, button->type ?: EV_KEY, button->code);
/*
- * Install custom action to cancel debounce timer and
+ * Install custom action to cancel release timer and
* workqueue item.
*/
error = devm_add_action(&pdev->dev, gpio_keys_quiesce_key, bdata);
i = 0;
for_each_child_of_node(node, pp) {
- int gpio = -1;
enum of_gpio_flags flags;
button = &pdata->buttons[i++];
- if (!of_find_property(pp, "gpios", NULL)) {
- button->irq = irq_of_parse_and_map(pp, 0);
- if (button->irq == 0) {
- i--;
- pdata->nbuttons--;
- dev_warn(dev, "Found button without gpios or irqs\n");
- continue;
- }
- } else {
- gpio = of_get_gpio_flags(pp, 0, &flags);
- if (gpio < 0) {
- error = gpio;
+ button->gpio = of_get_gpio_flags(pp, 0, &flags);
+ if (button->gpio < 0) {
+ error = button->gpio;
+ if (error != -ENOENT) {
if (error != -EPROBE_DEFER)
dev_err(dev,
"Failed to get gpio flags, error: %d\n",
error);
return ERR_PTR(error);
}
+ } else {
+ button->active_low = flags & OF_GPIO_ACTIVE_LOW;
}
- button->gpio = gpio;
- button->active_low = flags & OF_GPIO_ACTIVE_LOW;
+ button->irq = irq_of_parse_and_map(pp, 0);
+
+ if (!gpio_is_valid(button->gpio) && !button->irq) {
+ dev_err(dev, "Found button without gpios or irqs\n");
+ return ERR_PTR(-EINVAL);
+ }
if (of_property_read_u32(pp, "linux,code", &button->code)) {
dev_err(dev, "Button without keycode: 0x%x\n",
button->wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
+ button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL);
+
if (of_property_read_u32(pp, "debounce-interval",
&button->debounce_interval))
button->debounce_interval = 5;
if (error)
goto bail1;
- init_completion(&dev->cmd_done);
+ reinit_completion(&dev->cmd_done);
serio_write(serio, 0);
serio_write(serio, 0);
serio_write(serio, HIL_PKT_CMD >> 8);
if (error)
goto bail1;
- init_completion(&dev->cmd_done);
+ reinit_completion(&dev->cmd_done);
serio_write(serio, 0);
serio_write(serio, 0);
serio_write(serio, HIL_PKT_CMD >> 8);
if (error)
goto bail1;
- init_completion(&dev->cmd_done);
+ reinit_completion(&dev->cmd_done);
serio_write(serio, 0);
serio_write(serio, 0);
serio_write(serio, HIL_PKT_CMD >> 8);
#define STMPE_KEYPAD_MAX_ROWS 8
#define STMPE_KEYPAD_MAX_COLS 8
#define STMPE_KEYPAD_ROW_SHIFT 3
-#define STMPE_KEYPAD_KEYMAP_SIZE \
+#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
/**
* struct stmpe_keypad_variant - model-specific attributes
* @auto_increment: whether the KPC_DATA_BYTE register address
* auto-increments on multiple read
+ * @set_pullup: whether the pins need to have their pull-ups set
* @num_data: number of data bytes
* @num_normal_data: number of normal keys' data bytes
* @max_cols: maximum number of columns supported
*/
struct stmpe_keypad_variant {
bool auto_increment;
+ bool set_pullup;
int num_data;
int num_normal_data;
int max_cols;
},
[STMPE2401] = {
.auto_increment = false,
+ .set_pullup = true,
.num_data = 3,
.num_normal_data = 2,
.max_cols = 8,
},
[STMPE2403] = {
.auto_increment = true,
+ .set_pullup = true,
.num_data = 5,
.num_normal_data = 3,
.max_cols = 8,
},
};
+/**
+ * struct stmpe_keypad - STMPE keypad state container
+ * @stmpe: pointer to parent STMPE device
+ * @input: spawned input device
+ * @variant: STMPE variant
+ * @debounce_ms: debounce interval, in ms. Maximum is
+ * %STMPE_KEYPAD_MAX_DEBOUNCE.
+ * @scan_count: number of key scanning cycles to confirm key data.
+ * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
+ * @no_autorepeat: disable key autorepeat
+ * @rows: bitmask for the rows
+ * @cols: bitmask for the columns
+ * @keymap: the keymap
+ */
struct stmpe_keypad {
struct stmpe *stmpe;
struct input_dev *input;
const struct stmpe_keypad_variant *variant;
- const struct stmpe_keypad_platform_data *plat;
-
+ unsigned int debounce_ms;
+ unsigned int scan_count;
+ bool no_autorepeat;
unsigned int rows;
unsigned int cols;
-
- unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
+ unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
};
static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
unsigned int col_gpios = variant->col_gpios;
unsigned int row_gpios = variant->row_gpios;
struct stmpe *stmpe = keypad->stmpe;
+ u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB];
unsigned int pins = 0;
+ unsigned int pu_pins = 0;
+ int ret;
int i;
/*
for (i = 0; i < variant->max_cols; i++) {
int num = __ffs(col_gpios);
- if (keypad->cols & (1 << i))
+ if (keypad->cols & (1 << i)) {
pins |= 1 << num;
+ pu_pins |= 1 << num;
+ }
col_gpios &= ~(1 << num);
}
row_gpios &= ~(1 << num);
}
- return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+ ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+ if (ret)
+ return ret;
+
+ /*
+ * On STMPE24xx, set pin bias to pull-up on all keypad input
+ * pins (columns), this incidentally happen to be maximum 8 pins
+ * and placed at GPIO0-7 so only the LSB of the pull up register
+ * ever needs to be written.
+ */
+ if (variant->set_pullup) {
+ u8 val;
+
+ ret = stmpe_reg_read(stmpe, pureg);
+ if (ret)
+ return ret;
+
+ /* Do not touch unused pins, may be used for GPIO */
+ val = ret & ~pu_pins;
+ val |= pu_pins;
+
+ ret = stmpe_reg_write(stmpe, pureg, val);
+ }
+
+ return 0;
}
static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
{
- const struct stmpe_keypad_platform_data *plat = keypad->plat;
const struct stmpe_keypad_variant *variant = keypad->variant;
struct stmpe *stmpe = keypad->stmpe;
int ret;
- if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+ if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
return -EINVAL;
- if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+ if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
return -EINVAL;
ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
STMPE_KPC_CTRL_MSB_SCAN_COUNT,
- plat->scan_count << 4);
+ keypad->scan_count << 4);
if (ret < 0)
return ret;
STMPE_KPC_CTRL_LSB_SCAN |
STMPE_KPC_CTRL_LSB_DEBOUNCE,
STMPE_KPC_CTRL_LSB_SCAN |
- (plat->debounce_ms << 1));
+ (keypad->debounce_ms << 1));
}
-static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad)
+static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
+ u32 used_rows, u32 used_cols)
{
int row, col;
- for (row = 0; row < STMPE_KEYPAD_MAX_ROWS; row++) {
- for (col = 0; col < STMPE_KEYPAD_MAX_COLS; col++) {
+ for (row = 0; row < used_rows; row++) {
+ for (col = 0; col < used_cols; col++) {
int code = MATRIX_SCAN_CODE(row, col,
- STMPE_KEYPAD_ROW_SHIFT);
+ STMPE_KEYPAD_ROW_SHIFT);
if (keypad->keymap[code] != KEY_RESERVED) {
keypad->rows |= 1 << row;
keypad->cols |= 1 << col;
}
}
-#ifdef CONFIG_OF
-static const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
- struct device_node *np = dev->of_node;
- struct stmpe_keypad_platform_data *plat;
-
- if (!np)
- return ERR_PTR(-ENODEV);
-
- plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
- if (!plat)
- return ERR_PTR(-ENOMEM);
-
- of_property_read_u32(np, "debounce-interval", &plat->debounce_ms);
- of_property_read_u32(np, "st,scan-count", &plat->scan_count);
-
- plat->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
-
- return plat;
-}
-#else
-static inline const struct stmpe_keypad_platform_data *
-stmpe_keypad_of_probe(struct device *dev)
-{
- return ERR_PTR(-EINVAL);
-}
-#endif
-
static int stmpe_keypad_probe(struct platform_device *pdev)
{
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
- const struct stmpe_keypad_platform_data *plat;
+ struct device_node *np = pdev->dev.of_node;
struct stmpe_keypad *keypad;
struct input_dev *input;
+ u32 rows;
+ u32 cols;
int error;
int irq;
- plat = stmpe->pdata->keypad;
- if (!plat) {
- plat = stmpe_keypad_of_probe(&pdev->dev);
- if (IS_ERR(plat))
- return PTR_ERR(plat);
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
if (!keypad)
return -ENOMEM;
+ keypad->stmpe = stmpe;
+ keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+ of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
+ of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
+ keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
+
input = devm_input_allocate_device(&pdev->dev);
if (!input)
return -ENOMEM;
input->id.bustype = BUS_I2C;
input->dev.parent = &pdev->dev;
- error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
- STMPE_KEYPAD_MAX_ROWS,
- STMPE_KEYPAD_MAX_COLS,
+ error = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
+ if (error)
+ return error;
+
+ error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
keypad->keymap, input);
if (error)
return error;
input_set_capability(input, EV_MSC, MSC_SCAN);
- if (!plat->no_autorepeat)
+ if (!keypad->no_autorepeat)
__set_bit(EV_REP, input->evbit);
- stmpe_keypad_fill_used_pins(keypad);
+ stmpe_keypad_fill_used_pins(keypad, rows, cols);
- keypad->stmpe = stmpe;
- keypad->plat = plat;
keypad->input = input;
- keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
error = stmpe_keypad_chip_init(keypad);
if (error < 0)
unsigned char *pkt,
unsigned char pkt_id)
{
+ /*
+ * packet-fmt b7 b6 b5 b4 b3 b2 b1 b0
+ * Byte0 TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0
+ * Byte0 NEW L 1 X1-5 1 1 Y0-2 Y0-1 Y0-0
+ * Byte1 Y0-10 Y0-9 Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
+ * Byte2 X0-11 1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
+ * Byte3 X1-11 1 X0-4 X0-3 1 X0-2 X0-1 X0-0
+ * Byte4 TWO X1-10 TWO X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
+ * Byte4 MULTI X1-10 TWO X1-9 X1-8 X1-7 X1-6 Y1-5 1
+ * Byte4 NEW X1-10 TWO X1-9 X1-8 X1-7 X1-6 0 0
+ * Byte5 TWO & NEW Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
+ * Byte5 MULTI Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 F-1 F-0
+ * L: Left button
+ * R / M: Non-clickpads: Right / Middle button
+ * Clickpads: When > 2 fingers are down, and some fingers
+ * are in the button area, then the 2 coordinates reported
+ * are for fingers outside the button area and these report
+ * extra fingers being present in the right / left button
+ * area. Note these fingers are not added to the F field!
+ * so if a TWO packet is received and R = 1 then there are
+ * 3 fingers down, etc.
+ * TWO: 1: Two touches present, byte 0/4/5 are in TWO fmt
+ * 0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
+ * otherwise byte 0 bit 4 must be set and byte 0/4/5 are
+ * in NEW fmt
+ * F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
+ */
+
mt[0].x = ((pkt[2] & 0x80) << 4);
mt[0].x |= ((pkt[2] & 0x3F) << 5);
mt[0].x |= ((pkt[3] & 0x30) >> 1);
static int alps_get_mt_count(struct input_mt_pos *mt)
{
- int i;
+ int i, fingers = 0;
- for (i = 0; i < MAX_TOUCHES && mt[i].x != 0 && mt[i].y != 0; i++)
- /* empty */;
+ for (i = 0; i < MAX_TOUCHES; i++) {
+ if (mt[i].x != 0 || mt[i].y != 0)
+ fingers++;
+ }
- return i;
+ return fingers;
}
static int alps_decode_packet_v7(struct alps_fields *f,
unsigned char *p,
struct psmouse *psmouse)
{
+ struct alps_data *priv = psmouse->private;
unsigned char pkt_id;
pkt_id = alps_get_packet_id_v7(p);
return 0;
if (pkt_id == V7_PACKET_ID_UNKNOWN)
return -1;
+ /*
+ * NEW packets are send to indicate a discontinuity in the finger
+ * coordinate reporting. Specifically a finger may have moved from
+ * slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for
+ * us.
+ *
+ * NEW packets have 3 problems:
+ * 1) They do not contain middle / right button info (on non clickpads)
+ * this can be worked around by preserving the old button state
+ * 2) They do not contain an accurate fingercount, and they are
+ * typically send when the number of fingers changes. We cannot use
+ * the old finger count as that may mismatch with the amount of
+ * touch coordinates we've available in the NEW packet
+ * 3) Their x data for the second touch is inaccurate leading to
+ * a possible jump of the x coordinate by 16 units when the first
+ * non NEW packet comes in
+ * Since problems 2 & 3 cannot be worked around, just ignore them.
+ */
+ if (pkt_id == V7_PACKET_ID_NEW)
+ return 1;
alps_get_finger_coordinate_v7(f->mt, p, pkt_id);
- if (pkt_id == V7_PACKET_ID_TWO || pkt_id == V7_PACKET_ID_MULTI) {
- f->left = (p[0] & 0x80) >> 7;
+ if (pkt_id == V7_PACKET_ID_TWO)
+ f->fingers = alps_get_mt_count(f->mt);
+ else /* pkt_id == V7_PACKET_ID_MULTI */
+ f->fingers = 3 + (p[5] & 0x03);
+
+ f->left = (p[0] & 0x80) >> 7;
+ if (priv->flags & ALPS_BUTTONPAD) {
+ if (p[0] & 0x20)
+ f->fingers++;
+ if (p[0] & 0x10)
+ f->fingers++;
+ } else {
f->right = (p[0] & 0x20) >> 5;
f->middle = (p[0] & 0x10) >> 4;
}
- if (pkt_id == V7_PACKET_ID_TWO)
- f->fingers = alps_get_mt_count(f->mt);
- else if (pkt_id == V7_PACKET_ID_MULTI)
- f->fingers = 3 + (p[5] & 0x03);
+ /* Sometimes a single touch is reported in mt[1] rather then mt[0] */
+ if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) {
+ f->mt[0].x = f->mt[1].x;
+ f->mt[0].y = f->mt[1].y;
+ f->mt[1].x = 0;
+ f->mt[1].y = 0;
+ }
return 0;
}
TRACKPOINT_INT_ATTR(upthresh, TP_UP_THRESH, TP_DEF_UP_THRESH);
TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME, TP_DEF_Z_TIME);
TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV, TP_DEF_JENKS_CURV);
+TRACKPOINT_INT_ATTR(drift_time, TP_DRIFT_TIME, TP_DEF_DRIFT_TIME);
TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0,
TP_DEF_PTSON);
&psmouse_attr_upthresh.dattr.attr,
&psmouse_attr_ztime.dattr.attr,
&psmouse_attr_jenks.dattr.attr,
+ &psmouse_attr_drift_time.dattr.attr,
&psmouse_attr_press_to_select.dattr.attr,
&psmouse_attr_skipback.dattr.attr,
&psmouse_attr_ext_dev.dattr.attr,
TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, upthresh);
TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, ztime);
TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, jenks);
+ TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, drift_time);
/* toggles */
TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, press_to_select);
TRACKPOINT_SET_POWER_ON_DEFAULT(tp, upthresh);
TRACKPOINT_SET_POWER_ON_DEFAULT(tp, ztime);
TRACKPOINT_SET_POWER_ON_DEFAULT(tp, jenks);
+ TRACKPOINT_SET_POWER_ON_DEFAULT(tp, drift_time);
TRACKPOINT_SET_POWER_ON_DEFAULT(tp, inertia);
/* toggles */
#define TP_UP_THRESH 0x5A /* Used to generate a 'click' on Z-axis */
#define TP_Z_TIME 0x5E /* How sharp of a press */
#define TP_JENKS_CURV 0x5D /* Minimum curvature for double click */
+#define TP_DRIFT_TIME 0x5F /* How long a 'hands off' condition */
+ /* must last (x*107ms) for drift */
+ /* correction to occur */
/*
* Toggling Flag bits
#define TP_DEF_UP_THRESH 0xFF
#define TP_DEF_Z_TIME 0x26
#define TP_DEF_JENKS_CURV 0x87
+#define TP_DEF_DRIFT_TIME 0x05
/* Toggles */
#define TP_DEF_MB 0x00
unsigned char draghys, mindrag;
unsigned char thresh, upthresh;
unsigned char ztime, jenks;
+ unsigned char drift_time;
/* toggles */
unsigned char press_to_select;
#define MXT_T6_STATUS_COMSERR (1 << 2)
/* MXT_GEN_POWER_T7 field */
-struct t7_config {
- u8 idle;
- u8 active;
-} __packed;
-
-#define MXT_POWER_CFG_RUN 0
-#define MXT_POWER_CFG_DEEPSLEEP 1
+#define MXT_POWER_IDLEACQINT 0
+#define MXT_POWER_ACTVACQINT 1
+#define MXT_POWER_ACTV2IDLETO 2
/* MXT_GEN_ACQUIRE_T8 field */
#define MXT_ACQUIRE_CHRGTIME 0
#define MXT_ACQUIRE_ATCHCALSTHR 7
/* MXT_TOUCH_MULTI_T9 field */
+#define MXT_TOUCH_CTRL 0
#define MXT_T9_ORIENT 9
#define MXT_T9_RANGE 18
bool update_input;
u8 last_message_count;
u8 num_touchids;
- struct t7_config t7_cfg;
/* Cached parameters from object table */
u16 T5_address;
data->t6_status = status;
}
+static int mxt_write_object(struct mxt_data *data,
+ u8 type, u8 offset, u8 val)
+{
+ struct mxt_object *object;
+ u16 reg;
+
+ object = mxt_get_object(data, type);
+ if (!object || offset >= mxt_obj_size(object))
+ return -EINVAL;
+
+ reg = object->start_address;
+ return mxt_write_reg(data->client, reg + offset, val);
+}
+
static void mxt_input_button(struct mxt_data *data, u8 *message)
{
struct input_dev *input = data->input_dev;
return error;
}
-static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep)
-{
- struct device *dev = &data->client->dev;
- int error;
- struct t7_config *new_config;
- struct t7_config deepsleep = { .active = 0, .idle = 0 };
-
- if (sleep == MXT_POWER_CFG_DEEPSLEEP)
- new_config = &deepsleep;
- else
- new_config = &data->t7_cfg;
-
- error = __mxt_write_reg(data->client, data->T7_address,
- sizeof(data->t7_cfg), new_config);
- if (error)
- return error;
-
- dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n",
- new_config->active, new_config->idle);
-
- return 0;
-}
-
-static int mxt_init_t7_power_cfg(struct mxt_data *data)
-{
- struct device *dev = &data->client->dev;
- int error;
- bool retry = false;
-
-recheck:
- error = __mxt_read_reg(data->client, data->T7_address,
- sizeof(data->t7_cfg), &data->t7_cfg);
- if (error)
- return error;
-
- if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) {
- if (!retry) {
- dev_dbg(dev, "T7 cfg zero, resetting\n");
- mxt_soft_reset(data);
- retry = true;
- goto recheck;
- } else {
- dev_dbg(dev, "T7 cfg zero after reset, overriding\n");
- data->t7_cfg.active = 20;
- data->t7_cfg.idle = 100;
- return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
- }
- }
-
- dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n",
- data->t7_cfg.active, data->t7_cfg.idle);
- return 0;
-}
-
static int mxt_configure_objects(struct mxt_data *data,
const struct firmware *cfg)
{
dev_warn(dev, "Error %d updating config\n", error);
}
- error = mxt_init_t7_power_cfg(data);
- if (error) {
- dev_err(dev, "Failed to initialize power cfg\n");
- return error;
- }
-
error = mxt_initialize_t9_input_device(data);
if (error)
return error;
static void mxt_start(struct mxt_data *data)
{
- mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
-
- /* Recalibrate since chip has been in deep sleep */
- mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+ /* Touch enable */
+ mxt_write_object(data,
+ MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83);
}
static void mxt_stop(struct mxt_data *data)
{
- mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+ /* Touch disable */
+ mxt_write_object(data,
+ MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0);
}
static int mxt_input_open(struct input_dev *dev)
struct mxt_data *data = i2c_get_clientdata(client);
struct input_dev *input_dev = data->input_dev;
+ mxt_soft_reset(data);
+
mutex_lock(&input_dev->mutex);
if (input_dev->users)
}
#define EDT_ATTR_CHECKSET(name, reg) \
+do { \
if (pdata->name >= edt_ft5x06_attr_##name.limit_low && \
pdata->name <= edt_ft5x06_attr_##name.limit_high) \
- edt_ft5x06_register_write(tsdata, reg, pdata->name)
+ edt_ft5x06_register_write(tsdata, reg, pdata->name); \
+} while (0)
#define EDT_GET_PROP(name, reg) { \
u32 val; \
if (action != BUS_NOTIFY_REMOVED_DEVICE)
return 0;
- /*
- * If the device is still attached to a device driver we can't
- * tear down the domain yet as DMA mappings may still be in use.
- * Wait for the BUS_NOTIFY_UNBOUND_DRIVER event to do that.
- */
- if (action == BUS_NOTIFY_DEL_DEVICE && dev->driver != NULL)
- return 0;
-
domain = find_domain(dev);
if (!domain)
return 0;
domain_remove_one_dev_info(old_domain, dev);
else
domain_remove_dev_info(old_domain);
+
+ if (!domain_type_is_vm_or_si(old_domain) &&
+ list_empty(&old_domain->devices))
+ domain_exit(old_domain);
}
}
static u64 ipmmu_page_prot(unsigned int prot, u64 type)
{
- u64 pgprot = ARM_VMSA_PTE_XN | ARM_VMSA_PTE_nG | ARM_VMSA_PTE_AF
+ u64 pgprot = ARM_VMSA_PTE_nG | ARM_VMSA_PTE_AF
| ARM_VMSA_PTE_SH_IS | ARM_VMSA_PTE_AP_UNPRIV
| ARM_VMSA_PTE_NS | type;
if (prot & IOMMU_CACHE)
pgprot |= IMMAIR_ATTR_IDX_WBRWA << ARM_VMSA_PTE_ATTRINDX_SHIFT;
- if (prot & IOMMU_EXEC)
- pgprot &= ~ARM_VMSA_PTE_XN;
+ if (prot & IOMMU_NOEXEC)
+ pgprot |= ARM_VMSA_PTE_XN;
else if (!(prot & (IOMMU_READ | IOMMU_WRITE)))
/* If no access create a faulting entry to avoid TLB fills. */
pgprot &= ~ARM_VMSA_PTE_PAGE;
.remove = rk_iommu_remove,
.driver = {
.name = "rk_iommu",
- .owner = THIS_MODULE,
.of_match_table = of_match_ptr(rk_iommu_dt_ids),
},
};
schedule_zero(tc, virt_block, data_dest, cell, bio);
}
+static void set_pool_mode(struct pool *pool, enum pool_mode new_mode);
+
+static void check_for_space(struct pool *pool)
+{
+ int r;
+ dm_block_t nr_free;
+
+ if (get_pool_mode(pool) != PM_OUT_OF_DATA_SPACE)
+ return;
+
+ r = dm_pool_get_free_block_count(pool->pmd, &nr_free);
+ if (r)
+ return;
+
+ if (nr_free)
+ set_pool_mode(pool, PM_WRITE);
+}
+
/*
* A non-zero return indicates read_only or fail_io mode.
* Many callers don't care about the return value.
r = dm_pool_commit_metadata(pool->pmd);
if (r)
metadata_operation_failed(pool, "dm_pool_commit_metadata", r);
+ else
+ check_for_space(pool);
return r;
}
}
}
-static void set_pool_mode(struct pool *pool, enum pool_mode new_mode);
-
static int alloc_data_block(struct thin_c *tc, dm_block_t *result)
{
int r;
pool->process_cell = process_cell_read_only;
pool->process_discard_cell = process_discard_cell;
pool->process_prepared_mapping = process_prepared_mapping;
- pool->process_prepared_discard = process_prepared_discard_passdown;
+ pool->process_prepared_discard = process_prepared_discard;
if (!pool->pf.error_if_no_space && no_space_timeout)
queue_delayed_work(pool->wq, &pool->no_space_timeout, no_space_timeout);
r = -EINVAL;
goto bad;
}
+ atomic_set(&tc->refcount, 1);
+ init_completion(&tc->can_destroy);
list_add_tail_rcu(&tc->list, &tc->pool->active_thins);
spin_unlock_irqrestore(&tc->pool->lock, flags);
/*
dm_put(pool_md);
- atomic_set(&tc->refcount, 1);
- init_completion(&tc->can_destroy);
-
return 0;
bad:
static void clone_endio(struct bio *bio, int error)
{
- int r = 0;
+ int r = error;
struct dm_target_io *tio = container_of(bio, struct dm_target_io, clone);
struct dm_io *io = tio->io;
struct mapped_device *md = tio->io->md;
[STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
[STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
[STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
+ [STMPE_IDX_GPPUR_LSB] = STMPE1601_REG_GPIO_PU_LSB,
[STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
[STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
[STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
[STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW,
[STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW,
[STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW,
+ [STMPE_IDX_GPPUR_LSB] = STMPE1801_REG_GPIO_PULL_UP_LOW,
[STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
[STMPE_IDX_ISGPIOR_LSB] = STMPE1801_REG_INT_STA_GPIO_LOW,
};
[STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
[STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
[STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
+ [STMPE_IDX_GPPUR_LSB] = STMPE24XX_REG_GPPUR_LSB,
+ [STMPE_IDX_GPPDR_LSB] = STMPE24XX_REG_GPPDR_LSB,
[STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
[STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
[STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
#define STMPE1601_REG_GPIO_ED_MSB 0x8A
#define STMPE1601_REG_GPIO_RE_LSB 0x8D
#define STMPE1601_REG_GPIO_FE_LSB 0x8F
+#define STMPE1601_REG_GPIO_PU_LSB 0x91
#define STMPE1601_REG_GPIO_AF_U_MSB 0x92
#define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3)
#define STMPE24XX_REG_GPEDR_MSB 0x8C
#define STMPE24XX_REG_GPRER_LSB 0x91
#define STMPE24XX_REG_GPFER_LSB 0x94
+#define STMPE24XX_REG_GPPUR_LSB 0x97
+#define STMPE24XX_REG_GPPDR_LSB 0x9a
#define STMPE24XX_REG_GPAFR_U_MSB 0x9B
#define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3)
unsigned idx, bus_width = 0;
int err = 0;
- if (!mmc_can_ext_csd(card) &&
+ if (!mmc_can_ext_csd(card) ||
!(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)))
return 0;
/* slave is not a slave or master is not master of this slave */
if (!(slave_dev->flags & IFF_SLAVE) ||
!netdev_has_upper_dev(slave_dev, bond_dev)) {
- netdev_err(bond_dev, "cannot release %s\n",
+ netdev_dbg(bond_dev, "cannot release %s\n",
slave_dev->name);
return -EINVAL;
}
struct vringh_kiov *riov = &cfv->ctx.riov;
unsigned int skb_len;
-again:
do {
skb = NULL;
napi_schedule_prep(napi)) {
vringh_notify_disable_kern(cfv->vr_rx);
__napi_schedule(napi);
- goto again;
}
break;
if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) {
dev_err(&pdev->dev, "no I/O resource at PCI BAR #0\n");
- return -ENODEV;
+ goto err_out;
}
if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) {
dev_err(&pdev->dev, "I/O resource 0x%x @ 0x%lx busy\n",
NE_IO_EXTENT, ioaddr);
- return -EBUSY;
+ goto err_out;
}
reg0 = inb(ioaddr);
free_netdev (dev);
err_out_free_res:
release_region (ioaddr, NE_IO_EXTENT);
+err_out:
+ pci_disable_device(pdev);
return -ENODEV;
}
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rdc/Kconfig"
source "drivers/net/ethernet/rocker/Kconfig"
-
-config S6GMAC
- tristate "S6105 GMAC ethernet support"
- depends on XTENSA_VARIANT_S6000
- select PHYLIB
- ---help---
- This driver supports the on chip ethernet device on the
- S6105 xtensa processor.
-
- To compile this driver as a module, choose M here. The module
- will be called s6gmac.
-
source "drivers/net/ethernet/samsung/Kconfig"
source "drivers/net/ethernet/seeq/Kconfig"
source "drivers/net/ethernet/silan/Kconfig"
obj-$(CONFIG_SH_ETH) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
obj-$(CONFIG_NET_VENDOR_ROCKER) += rocker/
-obj-$(CONFIG_S6GMAC) += s6gmac.o
obj-$(CONFIG_NET_VENDOR_SAMSUNG) += samsung/
obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
obj-$(CONFIG_NET_VENDOR_SILAN) += silan/
}
db->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(db->clk))
+ if (IS_ERR(db->clk)) {
+ ret = PTR_ERR(db->clk);
goto out;
+ }
clk_prepare_enable(db->clk);
init_error:
free_skbufs(dev);
alloc_skbuf_error:
- if (priv->phydev) {
- phy_disconnect(priv->phydev);
- priv->phydev = NULL;
- }
phy_error:
return ret;
}
int ret;
unsigned long int flags;
- /* Stop and disconnect the PHY */
- if (priv->phydev) {
+ /* Stop the PHY */
+ if (priv->phydev)
phy_stop(priv->phydev);
- phy_disconnect(priv->phydev);
- priv->phydev = NULL;
- }
netif_stop_queue(dev);
napi_disable(&priv->napi);
static int altera_tse_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
+ struct altera_tse_private *priv = netdev_priv(ndev);
+
+ if (priv->phydev)
+ phy_disconnect(priv->phydev);
platform_set_drvdata(pdev, NULL);
altera_tse_mdio_destroy(ndev);
return 0;
}
-static bool bnx2x_gso_check(struct sk_buff *skb, struct net_device *dev)
+static netdev_features_t bnx2x_features_check(struct sk_buff *skb,
+ struct net_device *dev,
+ netdev_features_t features)
{
- return vxlan_gso_check(skb);
+ return vxlan_features_check(skb, features);
}
static const struct net_device_ops bnx2x_netdev_ops = {
#endif
.ndo_get_phys_port_id = bnx2x_get_phys_port_id,
.ndo_set_vf_link_state = bnx2x_set_vf_link_state,
- .ndo_gso_check = bnx2x_gso_check,
+ .ndo_features_check = bnx2x_features_check,
};
static int bnx2x_set_coherency_mask(struct bnx2x *bp)
goto err_out_apeunmap;
}
- /*
- * Reset chip in case UNDI or EFI driver did not shutdown
- * DMA self test will enable WDMAC and we'll see (spurious)
- * pending DMA on the PCI bus at that point.
- */
- if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) ||
- (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
- tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
- tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
- }
-
- err = tg3_test_dma(tp);
- if (err) {
- dev_err(&pdev->dev, "DMA engine test failed, aborting\n");
- goto err_out_apeunmap;
- }
-
intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW;
rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW;
sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW;
sndmbx += 0xc;
}
+ /*
+ * Reset chip in case UNDI or EFI driver did not shutdown
+ * DMA self test will enable WDMAC and we'll see (spurious)
+ * pending DMA on the PCI bus at that point.
+ */
+ if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) ||
+ (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
+ tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
+ tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+ }
+
+ err = tg3_test_dma(tp);
+ if (err) {
+ dev_err(&pdev->dev, "DMA engine test failed, aborting\n");
+ goto err_out_apeunmap;
+ }
+
tg3_init_coal(tp);
pci_set_drvdata(pdev, dev);
/* Retrieve flash partition info */
fcomp.comp_status = 0;
- init_completion(&fcomp.comp);
+ reinit_completion(&fcomp.comp);
spin_lock_irqsave(&bnad->bna_lock, flags);
ret = bfa_nw_flash_get_attr(&bnad->bna.flash, &drvinfo->flash_attr,
bnad_cb_completion, &fcomp);
s16 xact_addr_filt; /* index of our MAC address filter */
u16 rss_size; /* size of VI's RSS table slice */
u8 pidx; /* index into adapter port[] */
+ s8 mdio_addr;
+ u8 port_type; /* firmware port type */
+ u8 mod_type; /* firmware module type */
u8 port_id; /* physical port ID */
u8 nqsets; /* # of "Queue Sets" */
u8 first_qset; /* index of first "Queue Set" */
* is "contracted" to provide for the common code.
*/
void t4vf_os_link_changed(struct adapter *, int, int);
+void t4vf_os_portmod_changed(struct adapter *, int);
/*
* SGE function prototype declarations.
#include <linux/etherdevice.h>
#include <linux/debugfs.h>
#include <linux/ethtool.h>
+#include <linux/mdio.h>
#include "t4vf_common.h"
#include "t4vf_defs.h"
}
}
+/*
+ * THe port module type has changed on the indicated "port" (Virtual
+ * Interface).
+ */
+void t4vf_os_portmod_changed(struct adapter *adapter, int pidx)
+{
+ static const char * const mod_str[] = {
+ NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM"
+ };
+ const struct net_device *dev = adapter->port[pidx];
+ const struct port_info *pi = netdev_priv(dev);
+
+ if (pi->mod_type == FW_PORT_MOD_TYPE_NONE)
+ dev_info(adapter->pdev_dev, "%s: port module unplugged\n",
+ dev->name);
+ else if (pi->mod_type < ARRAY_SIZE(mod_str))
+ dev_info(adapter->pdev_dev, "%s: %s port module inserted\n",
+ dev->name, mod_str[pi->mod_type]);
+ else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED)
+ dev_info(adapter->pdev_dev, "%s: unsupported optical port "
+ "module inserted\n", dev->name);
+ else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN)
+ dev_info(adapter->pdev_dev, "%s: unknown port module inserted,"
+ "forcing TWINAX\n", dev->name);
+ else if (pi->mod_type == FW_PORT_MOD_TYPE_ERROR)
+ dev_info(adapter->pdev_dev, "%s: transceiver module error\n",
+ dev->name);
+ else
+ dev_info(adapter->pdev_dev, "%s: unknown module type %d "
+ "inserted\n", dev->name, pi->mod_type);
+}
+
/*
* Net device operations.
* ======================
* state of the port to which we're linked.
*/
-/*
- * Return current port link settings.
- */
-static int cxgb4vf_get_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
-{
- const struct port_info *pi = netdev_priv(dev);
+static unsigned int t4vf_from_fw_linkcaps(enum fw_port_type type,
+ unsigned int caps)
+{
+ unsigned int v = 0;
+
+ if (type == FW_PORT_TYPE_BT_SGMII || type == FW_PORT_TYPE_BT_XFI ||
+ type == FW_PORT_TYPE_BT_XAUI) {
+ v |= SUPPORTED_TP;
+ if (caps & FW_PORT_CAP_SPEED_100M)
+ v |= SUPPORTED_100baseT_Full;
+ if (caps & FW_PORT_CAP_SPEED_1G)
+ v |= SUPPORTED_1000baseT_Full;
+ if (caps & FW_PORT_CAP_SPEED_10G)
+ v |= SUPPORTED_10000baseT_Full;
+ } else if (type == FW_PORT_TYPE_KX4 || type == FW_PORT_TYPE_KX) {
+ v |= SUPPORTED_Backplane;
+ if (caps & FW_PORT_CAP_SPEED_1G)
+ v |= SUPPORTED_1000baseKX_Full;
+ if (caps & FW_PORT_CAP_SPEED_10G)
+ v |= SUPPORTED_10000baseKX4_Full;
+ } else if (type == FW_PORT_TYPE_KR)
+ v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full;
+ else if (type == FW_PORT_TYPE_BP_AP)
+ v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC |
+ SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full;
+ else if (type == FW_PORT_TYPE_BP4_AP)
+ v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC |
+ SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full |
+ SUPPORTED_10000baseKX4_Full;
+ else if (type == FW_PORT_TYPE_FIBER_XFI ||
+ type == FW_PORT_TYPE_FIBER_XAUI ||
+ type == FW_PORT_TYPE_SFP ||
+ type == FW_PORT_TYPE_QSFP_10G ||
+ type == FW_PORT_TYPE_QSA) {
+ v |= SUPPORTED_FIBRE;
+ if (caps & FW_PORT_CAP_SPEED_1G)
+ v |= SUPPORTED_1000baseT_Full;
+ if (caps & FW_PORT_CAP_SPEED_10G)
+ v |= SUPPORTED_10000baseT_Full;
+ } else if (type == FW_PORT_TYPE_BP40_BA ||
+ type == FW_PORT_TYPE_QSFP) {
+ v |= SUPPORTED_40000baseSR4_Full;
+ v |= SUPPORTED_FIBRE;
+ }
+
+ if (caps & FW_PORT_CAP_ANEG)
+ v |= SUPPORTED_Autoneg;
+ return v;
+}
+
+static int cxgb4vf_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ const struct port_info *p = netdev_priv(dev);
+
+ if (p->port_type == FW_PORT_TYPE_BT_SGMII ||
+ p->port_type == FW_PORT_TYPE_BT_XFI ||
+ p->port_type == FW_PORT_TYPE_BT_XAUI)
+ cmd->port = PORT_TP;
+ else if (p->port_type == FW_PORT_TYPE_FIBER_XFI ||
+ p->port_type == FW_PORT_TYPE_FIBER_XAUI)
+ cmd->port = PORT_FIBRE;
+ else if (p->port_type == FW_PORT_TYPE_SFP ||
+ p->port_type == FW_PORT_TYPE_QSFP_10G ||
+ p->port_type == FW_PORT_TYPE_QSA ||
+ p->port_type == FW_PORT_TYPE_QSFP) {
+ if (p->mod_type == FW_PORT_MOD_TYPE_LR ||
+ p->mod_type == FW_PORT_MOD_TYPE_SR ||
+ p->mod_type == FW_PORT_MOD_TYPE_ER ||
+ p->mod_type == FW_PORT_MOD_TYPE_LRM)
+ cmd->port = PORT_FIBRE;
+ else if (p->mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE ||
+ p->mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE)
+ cmd->port = PORT_DA;
+ else
+ cmd->port = PORT_OTHER;
+ } else
+ cmd->port = PORT_OTHER;
- cmd->supported = pi->link_cfg.supported;
- cmd->advertising = pi->link_cfg.advertising;
+ if (p->mdio_addr >= 0) {
+ cmd->phy_address = p->mdio_addr;
+ cmd->transceiver = XCVR_EXTERNAL;
+ cmd->mdio_support = p->port_type == FW_PORT_TYPE_BT_SGMII ?
+ MDIO_SUPPORTS_C22 : MDIO_SUPPORTS_C45;
+ } else {
+ cmd->phy_address = 0; /* not really, but no better option */
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->mdio_support = 0;
+ }
+
+ cmd->supported = t4vf_from_fw_linkcaps(p->port_type,
+ p->link_cfg.supported);
+ cmd->advertising = t4vf_from_fw_linkcaps(p->port_type,
+ p->link_cfg.advertising);
ethtool_cmd_speed_set(cmd,
- netif_carrier_ok(dev) ? pi->link_cfg.speed : -1);
+ netif_carrier_ok(dev) ? p->link_cfg.speed : 0);
cmd->duplex = DUPLEX_FULL;
-
- cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
- cmd->phy_address = pi->port_id;
- cmd->transceiver = XCVR_EXTERNAL;
- cmd->autoneg = pi->link_cfg.autoneg;
+ cmd->autoneg = p->link_cfg.autoneg;
cmd->maxtxpkt = 0;
cmd->maxrxpkt = 0;
return 0;
static inline bool is_10g_port(const struct link_config *lc)
{
- return (lc->supported & SUPPORTED_10000baseT_Full) != 0;
+ return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0;
}
static inline bool is_x_10g_port(const struct link_config *lc)
return a & 0x3f;
}
+#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
+ FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \
+ FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG)
+
/**
* init_link_config - initialize a link's SW state
* @lc: structure holding the link state
lc->requested_speed = 0;
lc->speed = 0;
lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
- if (lc->supported & SUPPORTED_Autoneg) {
- lc->advertising = lc->supported;
+ if (lc->supported & FW_PORT_CAP_ANEG) {
+ lc->advertising = lc->supported & ADVERT_MASK;
lc->autoneg = AUTONEG_ENABLE;
lc->requested_fc |= PAUSE_AUTONEG;
} else {
struct fw_vi_cmd vi_cmd, vi_rpl;
struct fw_port_cmd port_cmd, port_rpl;
int v;
- u32 word;
/*
* Execute a VI Read command to get our Virtual Interface information
if (v)
return v;
- v = 0;
- word = be16_to_cpu(port_rpl.u.info.pcap);
- if (word & FW_PORT_CAP_SPEED_100M)
- v |= SUPPORTED_100baseT_Full;
- if (word & FW_PORT_CAP_SPEED_1G)
- v |= SUPPORTED_1000baseT_Full;
- if (word & FW_PORT_CAP_SPEED_10G)
- v |= SUPPORTED_10000baseT_Full;
- if (word & FW_PORT_CAP_SPEED_40G)
- v |= SUPPORTED_40000baseSR4_Full;
- if (word & FW_PORT_CAP_ANEG)
- v |= SUPPORTED_Autoneg;
- init_link_config(&pi->link_cfg, v);
+ v = be32_to_cpu(port_rpl.u.info.lstatus_to_modtype);
+ pi->port_type = FW_PORT_CMD_PTYPE_G(v);
+ pi->mod_type = FW_PORT_MOD_TYPE_NA;
+
+ init_link_config(&pi->link_cfg, be16_to_cpu(port_rpl.u.info.pcap));
return 0;
}
*/
const struct fw_port_cmd *port_cmd =
(const struct fw_port_cmd *)rpl;
- u32 word;
+ u32 stat, mod;
int action, port_id, link_ok, speed, fc, pidx;
/*
port_id = FW_PORT_CMD_PORTID_G(
be32_to_cpu(port_cmd->op_to_portid));
- word = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype);
- link_ok = (word & FW_PORT_CMD_LSTATUS_F) != 0;
+ stat = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype);
+ link_ok = (stat & FW_PORT_CMD_LSTATUS_F) != 0;
speed = 0;
fc = 0;
- if (word & FW_PORT_CMD_RXPAUSE_F)
+ if (stat & FW_PORT_CMD_RXPAUSE_F)
fc |= PAUSE_RX;
- if (word & FW_PORT_CMD_TXPAUSE_F)
+ if (stat & FW_PORT_CMD_TXPAUSE_F)
fc |= PAUSE_TX;
- if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
+ if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
speed = 100;
- else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
+ else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
speed = 1000;
- else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
+ else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
speed = 10000;
- else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
+ else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
speed = 40000;
/*
continue;
lc = &pi->link_cfg;
+
+ mod = FW_PORT_CMD_MODTYPE_G(stat);
+ if (mod != pi->mod_type) {
+ pi->mod_type = mod;
+ t4vf_os_portmod_changed(adapter, pidx);
+ }
+
if (link_ok != lc->link_ok || speed != lc->speed ||
fc != lc->fc) {
/* something changed */
lc->link_ok = link_ok;
lc->speed = speed;
lc->fc = fc;
+ lc->supported =
+ be16_to_cpu(port_cmd->u.info.pcap);
t4vf_os_link_changed(adapter, pidx, link_ok);
}
}
PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3);
}
- if ((netdev->features & NETIF_F_RXCSUM) && !csum_not_calc) {
- skb->csum = htons(checksum);
- skb->ip_summed = CHECKSUM_COMPLETE;
- }
+ /* Hardware does not provide whole packet checksum. It only
+ * provides pseudo checksum. Since hw validates the packet
+ * checksum but not provide us the checksum value. use
+ * CHECSUM_UNNECESSARY.
+ */
+ if ((netdev->features & NETIF_F_RXCSUM) && tcp_udp_csum_ok &&
+ ipv4_csum_ok)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
if (vlan_stripped)
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tci);
if (vnic_rq_desc_used(&enic->rq[i]) == 0) {
netdev_err(netdev, "Unable to alloc receive buffers\n");
err = -ENOMEM;
- goto err_out_notify_unset;
+ goto err_out_free_rq;
}
}
return 0;
-err_out_notify_unset:
+err_out_free_rq:
+ for (i = 0; i < enic->rq_count; i++)
+ vnic_rq_clean(&enic->rq[i], enic_free_rq_buf);
enic_dev_notify_unset(enic);
err_out_free_intr:
enic_free_intr(enic);
adapter->vxlan_port_count--;
}
-static bool be_gso_check(struct sk_buff *skb, struct net_device *dev)
+static netdev_features_t be_features_check(struct sk_buff *skb,
+ struct net_device *dev,
+ netdev_features_t features)
{
- return vxlan_gso_check(skb);
+ return vxlan_features_check(skb, features);
}
#endif
#ifdef CONFIG_BE2NET_VXLAN
.ndo_add_vxlan_port = be_add_vxlan_port,
.ndo_del_vxlan_port = be_del_vxlan_port,
- .ndo_gso_check = be_gso_check,
+ .ndo_features_check = be_features_check,
#endif
};
mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
} else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
(mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
- !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+ (nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
/* enable/disable MDI/MDI-X auto-switching. */
mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
if (desc_n >= ring->count || desc_n < 0) {
dev_info(&pf->pdev->dev,
"descriptor %d not found\n", desc_n);
- return;
+ goto out;
}
if (!is_rx_ring) {
txd = I40E_TX_DESC(ring, desc_n);
} else {
dev_info(&pf->pdev->dev, "dump desc rx/tx <vsi_seid> <ring_id> [<desc_n>]\n");
}
+
+out:
kfree(ring);
}
u32 swmask = mask;
u32 fwmask = mask << 16;
s32 ret_val = 0;
- s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+ s32 i = 0, timeout = 200;
while (i < timeout) {
if (igb_get_hw_semaphore(hw)) {
queue_work(priv->mdev->workqueue, &priv->vxlan_del_task);
}
-static bool mlx4_en_gso_check(struct sk_buff *skb, struct net_device *dev)
+static netdev_features_t mlx4_en_features_check(struct sk_buff *skb,
+ struct net_device *dev,
+ netdev_features_t features)
{
- return vxlan_gso_check(skb);
+ return vxlan_features_check(skb, features);
}
#endif
#ifdef CONFIG_MLX4_EN_VXLAN
.ndo_add_vxlan_port = mlx4_en_add_vxlan_port,
.ndo_del_vxlan_port = mlx4_en_del_vxlan_port,
- .ndo_gso_check = mlx4_en_gso_check,
+ .ndo_features_check = mlx4_en_features_check,
#endif
};
#ifdef CONFIG_MLX4_EN_VXLAN
.ndo_add_vxlan_port = mlx4_en_add_vxlan_port,
.ndo_del_vxlan_port = mlx4_en_del_vxlan_port,
- .ndo_gso_check = mlx4_en_gso_check,
+ .ndo_features_check = mlx4_en_features_check,
#endif
};
tx_desc->ctrl.owner_opcode = op_own;
if (send_doorbell) {
wmb();
- iowrite32(ring->doorbell_qpn,
+ /* Since there is no iowrite*_native() that writes the
+ * value as is, without byteswapping - using the one
+ * the doesn't do byteswapping in the relevant arch
+ * endianness.
+ */
+#if defined(__LITTLE_ENDIAN)
+ iowrite32(
+#else
+ iowrite32be(
+#endif
+ ring->doorbell_qpn,
ring->bf.uar->map + MLX4_SEND_DOORBELL);
} else {
ring->xmit_more++;
err = mlx4_dev_cap(dev, &dev_cap);
if (err) {
mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting\n");
- goto err_stop_fw;
+ return err;
}
choose_steering_mode(dev, &dev_cap);
&init_hca);
if ((long long) icm_size < 0) {
err = icm_size;
- goto err_stop_fw;
+ return err;
}
dev->caps.max_fmr_maps = (1 << (32 - ilog2(dev->caps.num_mpts))) - 1;
err = mlx4_init_icm(dev, &dev_cap, &init_hca, icm_size);
if (err)
- goto err_stop_fw;
+ return err;
err = mlx4_INIT_HCA(dev, &init_hca);
if (err) {
err = mlx4_query_func(dev, &dev_cap);
if (err < 0) {
mlx4_err(dev, "QUERY_FUNC command failed, aborting.\n");
- goto err_stop_fw;
+ goto err_close;
} else if (err & MLX4_QUERY_FUNC_NUM_SYS_EQS) {
dev->caps.num_eqs = dev_cap.max_eqs;
dev->caps.reserved_eqs = dev_cap.reserved_eqs;
if (!mlx4_is_slave(dev))
mlx4_free_icms(dev);
-err_stop_fw:
- if (!mlx4_is_slave(dev)) {
- mlx4_UNMAP_FA(dev);
- mlx4_free_icm(dev, priv->fw.fw_icm, 0);
- }
return err;
}
void mlx4_mr_rereg_mem_cleanup(struct mlx4_dev *dev, struct mlx4_mr *mr)
{
mlx4_mtt_cleanup(dev, &mr->mtt);
+ mr->mtt.order = -1;
}
EXPORT_SYMBOL_GPL(mlx4_mr_rereg_mem_cleanup);
{
int err;
- mpt_entry->start = cpu_to_be64(iova);
- mpt_entry->length = cpu_to_be64(size);
- mpt_entry->entity_size = cpu_to_be32(page_shift);
-
err = mlx4_mtt_init(dev, npages, page_shift, &mr->mtt);
if (err)
return err;
+ mpt_entry->start = cpu_to_be64(mr->iova);
+ mpt_entry->length = cpu_to_be64(mr->size);
+ mpt_entry->entity_size = cpu_to_be32(mr->mtt.page_shift);
+
mpt_entry->pd_flags &= cpu_to_be32(MLX4_MPT_PD_MASK |
MLX4_MPT_PD_FLAG_EN_INV);
mpt_entry->flags &= cpu_to_be32(MLX4_MPT_FLAG_FREE |
/* Spanning Tree */
-static inline void port_cfg_dis_learn(struct ksz_hw *hw, int p, int set)
-{
- port_cfg(hw, p,
- KS8842_PORT_CTRL_2_OFFSET, PORT_LEARN_DISABLE, set);
-}
-
static inline void port_cfg_rx(struct ksz_hw *hw, int p, int set)
{
port_cfg(hw, p,
(void)pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
&mgp->cmd_bus, GFP_KERNEL);
- if (mgp->cmd == NULL)
+ if (!mgp->cmd) {
+ status = -ENOMEM;
goto abort_with_enabled;
+ }
mgp->board_span = pci_resource_len(pdev, 0);
mgp->iomem_base = pci_resource_start(pdev, 0);
{
int i = 0;
- while (i < 10) {
- if (i)
- ssleep(1);
-
+ do {
if (ql_sem_lock(qdev,
QL_DRVR_SEM_MASK,
(QL_RESOURCE_BITS_BASE_CODE | (qdev->mac_index)
"driver lock acquired\n");
return 1;
}
- }
+ ssleep(1);
+ } while (++i < 10);
netdev_err(qdev->ndev, "Timed out waiting for driver lock...\n");
return 0;
adapter->flags |= QLCNIC_DEL_VXLAN_PORT;
}
-static bool qlcnic_gso_check(struct sk_buff *skb, struct net_device *dev)
+static netdev_features_t qlcnic_features_check(struct sk_buff *skb,
+ struct net_device *dev,
+ netdev_features_t features)
{
- return vxlan_gso_check(skb);
+ return vxlan_features_check(skb, features);
}
#endif
#ifdef CONFIG_QLCNIC_VXLAN
.ndo_add_vxlan_port = qlcnic_add_vxlan_port,
.ndo_del_vxlan_port = qlcnic_del_vxlan_port,
- .ndo_gso_check = qlcnic_gso_check,
+ .ndo_features_check = qlcnic_features_check,
#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = qlcnic_poll_controller,
} else {
dev_err(&pdev->dev,
"%s: failed. Please Reboot\n", __func__);
+ err = -ENODEV;
goto err_out_free_hw;
}
if (rc)
goto err_out;
+ disable_dev_on_err = 1;
rc = pci_request_regions (pdev, DRV_NAME);
if (rc)
goto err_out;
- disable_dev_on_err = 1;
pci_set_master (pdev);
return 0;
err_out:
+ netif_napi_del(&tp->napi);
__rtl8139_cleanup_dev (dev);
pci_disable_device (pdev);
return i;
assert (dev != NULL);
cancel_delayed_work_sync(&tp->thread);
+ netif_napi_del(&tp->napi);
unregister_netdev (dev);
+++ /dev/null
-/*
- * Ethernet driver for S6105 on chip network device
- * (c)2008 emlix GmbH http://www.emlix.com
- * Authors: Oskar Schirmer <oskar@scara.com>
- * Daniel Gloeckner <dg@emlix.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/if.h>
-#include <linux/stddef.h>
-#include <linux/mii.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <variant/hardware.h>
-#include <variant/dmac.h>
-
-#define DRV_NAME "s6gmac"
-#define DRV_PRMT DRV_NAME ": "
-
-
-/* register declarations */
-
-#define S6_GMAC_MACCONF1 0x000
-#define S6_GMAC_MACCONF1_TXENA 0
-#define S6_GMAC_MACCONF1_SYNCTX 1
-#define S6_GMAC_MACCONF1_RXENA 2
-#define S6_GMAC_MACCONF1_SYNCRX 3
-#define S6_GMAC_MACCONF1_TXFLOWCTRL 4
-#define S6_GMAC_MACCONF1_RXFLOWCTRL 5
-#define S6_GMAC_MACCONF1_LOOPBACK 8
-#define S6_GMAC_MACCONF1_RESTXFUNC 16
-#define S6_GMAC_MACCONF1_RESRXFUNC 17
-#define S6_GMAC_MACCONF1_RESTXMACCTRL 18
-#define S6_GMAC_MACCONF1_RESRXMACCTRL 19
-#define S6_GMAC_MACCONF1_SIMULRES 30
-#define S6_GMAC_MACCONF1_SOFTRES 31
-#define S6_GMAC_MACCONF2 0x004
-#define S6_GMAC_MACCONF2_FULL 0
-#define S6_GMAC_MACCONF2_CRCENA 1
-#define S6_GMAC_MACCONF2_PADCRCENA 2
-#define S6_GMAC_MACCONF2_LENGTHFCHK 4
-#define S6_GMAC_MACCONF2_HUGEFRAMENA 5
-#define S6_GMAC_MACCONF2_IFMODE 8
-#define S6_GMAC_MACCONF2_IFMODE_NIBBLE 1
-#define S6_GMAC_MACCONF2_IFMODE_BYTE 2
-#define S6_GMAC_MACCONF2_IFMODE_MASK 3
-#define S6_GMAC_MACCONF2_PREAMBLELEN 12
-#define S6_GMAC_MACCONF2_PREAMBLELEN_MASK 0x0F
-#define S6_GMAC_MACIPGIFG 0x008
-#define S6_GMAC_MACIPGIFG_B2BINTERPGAP 0
-#define S6_GMAC_MACIPGIFG_B2BINTERPGAP_MASK 0x7F
-#define S6_GMAC_MACIPGIFG_MINIFGENFORCE 8
-#define S6_GMAC_MACIPGIFG_B2BINTERPGAP2 16
-#define S6_GMAC_MACIPGIFG_B2BINTERPGAP1 24
-#define S6_GMAC_MACHALFDUPLEX 0x00C
-#define S6_GMAC_MACHALFDUPLEX_COLLISWIN 0
-#define S6_GMAC_MACHALFDUPLEX_COLLISWIN_MASK 0x3F
-#define S6_GMAC_MACHALFDUPLEX_RETXMAX 12
-#define S6_GMAC_MACHALFDUPLEX_RETXMAX_MASK 0x0F
-#define S6_GMAC_MACHALFDUPLEX_EXCESSDEF 16
-#define S6_GMAC_MACHALFDUPLEX_NOBACKOFF 17
-#define S6_GMAC_MACHALFDUPLEX_BPNOBCKOF 18
-#define S6_GMAC_MACHALFDUPLEX_ALTBEBENA 19
-#define S6_GMAC_MACHALFDUPLEX_ALTBEBTRN 20
-#define S6_GMAC_MACHALFDUPLEX_ALTBEBTR_MASK 0x0F
-#define S6_GMAC_MACMAXFRAMELEN 0x010
-#define S6_GMAC_MACMIICONF 0x020
-#define S6_GMAC_MACMIICONF_CSEL 0
-#define S6_GMAC_MACMIICONF_CSEL_DIV10 0
-#define S6_GMAC_MACMIICONF_CSEL_DIV12 1
-#define S6_GMAC_MACMIICONF_CSEL_DIV14 2
-#define S6_GMAC_MACMIICONF_CSEL_DIV18 3
-#define S6_GMAC_MACMIICONF_CSEL_DIV24 4
-#define S6_GMAC_MACMIICONF_CSEL_DIV34 5
-#define S6_GMAC_MACMIICONF_CSEL_DIV68 6
-#define S6_GMAC_MACMIICONF_CSEL_DIV168 7
-#define S6_GMAC_MACMIICONF_CSEL_MASK 7
-#define S6_GMAC_MACMIICONF_PREAMBLESUPR 4
-#define S6_GMAC_MACMIICONF_SCANAUTOINCR 5
-#define S6_GMAC_MACMIICMD 0x024
-#define S6_GMAC_MACMIICMD_READ 0
-#define S6_GMAC_MACMIICMD_SCAN 1
-#define S6_GMAC_MACMIIADDR 0x028
-#define S6_GMAC_MACMIIADDR_REG 0
-#define S6_GMAC_MACMIIADDR_REG_MASK 0x1F
-#define S6_GMAC_MACMIIADDR_PHY 8
-#define S6_GMAC_MACMIIADDR_PHY_MASK 0x1F
-#define S6_GMAC_MACMIICTRL 0x02C
-#define S6_GMAC_MACMIISTAT 0x030
-#define S6_GMAC_MACMIIINDI 0x034
-#define S6_GMAC_MACMIIINDI_BUSY 0
-#define S6_GMAC_MACMIIINDI_SCAN 1
-#define S6_GMAC_MACMIIINDI_INVAL 2
-#define S6_GMAC_MACINTERFSTAT 0x03C
-#define S6_GMAC_MACINTERFSTAT_LINKFAIL 3
-#define S6_GMAC_MACINTERFSTAT_EXCESSDEF 9
-#define S6_GMAC_MACSTATADDR1 0x040
-#define S6_GMAC_MACSTATADDR2 0x044
-
-#define S6_GMAC_FIFOCONF0 0x048
-#define S6_GMAC_FIFOCONF0_HSTRSTWT 0
-#define S6_GMAC_FIFOCONF0_HSTRSTSR 1
-#define S6_GMAC_FIFOCONF0_HSTRSTFR 2
-#define S6_GMAC_FIFOCONF0_HSTRSTST 3
-#define S6_GMAC_FIFOCONF0_HSTRSTFT 4
-#define S6_GMAC_FIFOCONF0_WTMENREQ 8
-#define S6_GMAC_FIFOCONF0_SRFENREQ 9
-#define S6_GMAC_FIFOCONF0_FRFENREQ 10
-#define S6_GMAC_FIFOCONF0_STFENREQ 11
-#define S6_GMAC_FIFOCONF0_FTFENREQ 12
-#define S6_GMAC_FIFOCONF0_WTMENRPLY 16
-#define S6_GMAC_FIFOCONF0_SRFENRPLY 17
-#define S6_GMAC_FIFOCONF0_FRFENRPLY 18
-#define S6_GMAC_FIFOCONF0_STFENRPLY 19
-#define S6_GMAC_FIFOCONF0_FTFENRPLY 20
-#define S6_GMAC_FIFOCONF1 0x04C
-#define S6_GMAC_FIFOCONF2 0x050
-#define S6_GMAC_FIFOCONF2_CFGLWM 0
-#define S6_GMAC_FIFOCONF2_CFGHWM 16
-#define S6_GMAC_FIFOCONF3 0x054
-#define S6_GMAC_FIFOCONF3_CFGFTTH 0
-#define S6_GMAC_FIFOCONF3_CFGHWMFT 16
-#define S6_GMAC_FIFOCONF4 0x058
-#define S6_GMAC_FIFOCONF_RSV_PREVDROP 0
-#define S6_GMAC_FIFOCONF_RSV_RUNT 1
-#define S6_GMAC_FIFOCONF_RSV_FALSECAR 2
-#define S6_GMAC_FIFOCONF_RSV_CODEERR 3
-#define S6_GMAC_FIFOCONF_RSV_CRCERR 4
-#define S6_GMAC_FIFOCONF_RSV_LENGTHERR 5
-#define S6_GMAC_FIFOCONF_RSV_LENRANGE 6
-#define S6_GMAC_FIFOCONF_RSV_OK 7
-#define S6_GMAC_FIFOCONF_RSV_MULTICAST 8
-#define S6_GMAC_FIFOCONF_RSV_BROADCAST 9
-#define S6_GMAC_FIFOCONF_RSV_DRIBBLE 10
-#define S6_GMAC_FIFOCONF_RSV_CTRLFRAME 11
-#define S6_GMAC_FIFOCONF_RSV_PAUSECTRL 12
-#define S6_GMAC_FIFOCONF_RSV_UNOPCODE 13
-#define S6_GMAC_FIFOCONF_RSV_VLANTAG 14
-#define S6_GMAC_FIFOCONF_RSV_LONGEVENT 15
-#define S6_GMAC_FIFOCONF_RSV_TRUNCATED 16
-#define S6_GMAC_FIFOCONF_RSV_MASK 0x3FFFF
-#define S6_GMAC_FIFOCONF5 0x05C
-#define S6_GMAC_FIFOCONF5_DROPLT64 18
-#define S6_GMAC_FIFOCONF5_CFGBYTM 19
-#define S6_GMAC_FIFOCONF5_RXDROPSIZE 20
-#define S6_GMAC_FIFOCONF5_RXDROPSIZE_MASK 0xF
-
-#define S6_GMAC_STAT_REGS 0x080
-#define S6_GMAC_STAT_SIZE_MIN 12
-#define S6_GMAC_STATTR64 0x080
-#define S6_GMAC_STATTR64_SIZE 18
-#define S6_GMAC_STATTR127 0x084
-#define S6_GMAC_STATTR127_SIZE 18
-#define S6_GMAC_STATTR255 0x088
-#define S6_GMAC_STATTR255_SIZE 18
-#define S6_GMAC_STATTR511 0x08C
-#define S6_GMAC_STATTR511_SIZE 18
-#define S6_GMAC_STATTR1K 0x090
-#define S6_GMAC_STATTR1K_SIZE 18
-#define S6_GMAC_STATTRMAX 0x094
-#define S6_GMAC_STATTRMAX_SIZE 18
-#define S6_GMAC_STATTRMGV 0x098
-#define S6_GMAC_STATTRMGV_SIZE 18
-#define S6_GMAC_STATRBYT 0x09C
-#define S6_GMAC_STATRBYT_SIZE 24
-#define S6_GMAC_STATRPKT 0x0A0
-#define S6_GMAC_STATRPKT_SIZE 18
-#define S6_GMAC_STATRFCS 0x0A4
-#define S6_GMAC_STATRFCS_SIZE 12
-#define S6_GMAC_STATRMCA 0x0A8
-#define S6_GMAC_STATRMCA_SIZE 18
-#define S6_GMAC_STATRBCA 0x0AC
-#define S6_GMAC_STATRBCA_SIZE 22
-#define S6_GMAC_STATRXCF 0x0B0
-#define S6_GMAC_STATRXCF_SIZE 18
-#define S6_GMAC_STATRXPF 0x0B4
-#define S6_GMAC_STATRXPF_SIZE 12
-#define S6_GMAC_STATRXUO 0x0B8
-#define S6_GMAC_STATRXUO_SIZE 12
-#define S6_GMAC_STATRALN 0x0BC
-#define S6_GMAC_STATRALN_SIZE 12
-#define S6_GMAC_STATRFLR 0x0C0
-#define S6_GMAC_STATRFLR_SIZE 16
-#define S6_GMAC_STATRCDE 0x0C4
-#define S6_GMAC_STATRCDE_SIZE 12
-#define S6_GMAC_STATRCSE 0x0C8
-#define S6_GMAC_STATRCSE_SIZE 12
-#define S6_GMAC_STATRUND 0x0CC
-#define S6_GMAC_STATRUND_SIZE 12
-#define S6_GMAC_STATROVR 0x0D0
-#define S6_GMAC_STATROVR_SIZE 12
-#define S6_GMAC_STATRFRG 0x0D4
-#define S6_GMAC_STATRFRG_SIZE 12
-#define S6_GMAC_STATRJBR 0x0D8
-#define S6_GMAC_STATRJBR_SIZE 12
-#define S6_GMAC_STATRDRP 0x0DC
-#define S6_GMAC_STATRDRP_SIZE 12
-#define S6_GMAC_STATTBYT 0x0E0
-#define S6_GMAC_STATTBYT_SIZE 24
-#define S6_GMAC_STATTPKT 0x0E4
-#define S6_GMAC_STATTPKT_SIZE 18
-#define S6_GMAC_STATTMCA 0x0E8
-#define S6_GMAC_STATTMCA_SIZE 18
-#define S6_GMAC_STATTBCA 0x0EC
-#define S6_GMAC_STATTBCA_SIZE 18
-#define S6_GMAC_STATTXPF 0x0F0
-#define S6_GMAC_STATTXPF_SIZE 12
-#define S6_GMAC_STATTDFR 0x0F4
-#define S6_GMAC_STATTDFR_SIZE 12
-#define S6_GMAC_STATTEDF 0x0F8
-#define S6_GMAC_STATTEDF_SIZE 12
-#define S6_GMAC_STATTSCL 0x0FC
-#define S6_GMAC_STATTSCL_SIZE 12
-#define S6_GMAC_STATTMCL 0x100
-#define S6_GMAC_STATTMCL_SIZE 12
-#define S6_GMAC_STATTLCL 0x104
-#define S6_GMAC_STATTLCL_SIZE 12
-#define S6_GMAC_STATTXCL 0x108
-#define S6_GMAC_STATTXCL_SIZE 12
-#define S6_GMAC_STATTNCL 0x10C
-#define S6_GMAC_STATTNCL_SIZE 13
-#define S6_GMAC_STATTPFH 0x110
-#define S6_GMAC_STATTPFH_SIZE 12
-#define S6_GMAC_STATTDRP 0x114
-#define S6_GMAC_STATTDRP_SIZE 12
-#define S6_GMAC_STATTJBR 0x118
-#define S6_GMAC_STATTJBR_SIZE 12
-#define S6_GMAC_STATTFCS 0x11C
-#define S6_GMAC_STATTFCS_SIZE 12
-#define S6_GMAC_STATTXCF 0x120
-#define S6_GMAC_STATTXCF_SIZE 12
-#define S6_GMAC_STATTOVR 0x124
-#define S6_GMAC_STATTOVR_SIZE 12
-#define S6_GMAC_STATTUND 0x128
-#define S6_GMAC_STATTUND_SIZE 12
-#define S6_GMAC_STATTFRG 0x12C
-#define S6_GMAC_STATTFRG_SIZE 12
-#define S6_GMAC_STATCARRY(n) (0x130 + 4*(n))
-#define S6_GMAC_STATCARRYMSK(n) (0x138 + 4*(n))
-#define S6_GMAC_STATCARRY1_RDRP 0
-#define S6_GMAC_STATCARRY1_RJBR 1
-#define S6_GMAC_STATCARRY1_RFRG 2
-#define S6_GMAC_STATCARRY1_ROVR 3
-#define S6_GMAC_STATCARRY1_RUND 4
-#define S6_GMAC_STATCARRY1_RCSE 5
-#define S6_GMAC_STATCARRY1_RCDE 6
-#define S6_GMAC_STATCARRY1_RFLR 7
-#define S6_GMAC_STATCARRY1_RALN 8
-#define S6_GMAC_STATCARRY1_RXUO 9
-#define S6_GMAC_STATCARRY1_RXPF 10
-#define S6_GMAC_STATCARRY1_RXCF 11
-#define S6_GMAC_STATCARRY1_RBCA 12
-#define S6_GMAC_STATCARRY1_RMCA 13
-#define S6_GMAC_STATCARRY1_RFCS 14
-#define S6_GMAC_STATCARRY1_RPKT 15
-#define S6_GMAC_STATCARRY1_RBYT 16
-#define S6_GMAC_STATCARRY1_TRMGV 25
-#define S6_GMAC_STATCARRY1_TRMAX 26
-#define S6_GMAC_STATCARRY1_TR1K 27
-#define S6_GMAC_STATCARRY1_TR511 28
-#define S6_GMAC_STATCARRY1_TR255 29
-#define S6_GMAC_STATCARRY1_TR127 30
-#define S6_GMAC_STATCARRY1_TR64 31
-#define S6_GMAC_STATCARRY2_TDRP 0
-#define S6_GMAC_STATCARRY2_TPFH 1
-#define S6_GMAC_STATCARRY2_TNCL 2
-#define S6_GMAC_STATCARRY2_TXCL 3
-#define S6_GMAC_STATCARRY2_TLCL 4
-#define S6_GMAC_STATCARRY2_TMCL 5
-#define S6_GMAC_STATCARRY2_TSCL 6
-#define S6_GMAC_STATCARRY2_TEDF 7
-#define S6_GMAC_STATCARRY2_TDFR 8
-#define S6_GMAC_STATCARRY2_TXPF 9
-#define S6_GMAC_STATCARRY2_TBCA 10
-#define S6_GMAC_STATCARRY2_TMCA 11
-#define S6_GMAC_STATCARRY2_TPKT 12
-#define S6_GMAC_STATCARRY2_TBYT 13
-#define S6_GMAC_STATCARRY2_TFRG 14
-#define S6_GMAC_STATCARRY2_TUND 15
-#define S6_GMAC_STATCARRY2_TOVR 16
-#define S6_GMAC_STATCARRY2_TXCF 17
-#define S6_GMAC_STATCARRY2_TFCS 18
-#define S6_GMAC_STATCARRY2_TJBR 19
-
-#define S6_GMAC_HOST_PBLKCTRL 0x140
-#define S6_GMAC_HOST_PBLKCTRL_TXENA 0
-#define S6_GMAC_HOST_PBLKCTRL_RXENA 1
-#define S6_GMAC_HOST_PBLKCTRL_TXSRES 2
-#define S6_GMAC_HOST_PBLKCTRL_RXSRES 3
-#define S6_GMAC_HOST_PBLKCTRL_TXBSIZ 8
-#define S6_GMAC_HOST_PBLKCTRL_RXBSIZ 12
-#define S6_GMAC_HOST_PBLKCTRL_SIZ_16 4
-#define S6_GMAC_HOST_PBLKCTRL_SIZ_32 5
-#define S6_GMAC_HOST_PBLKCTRL_SIZ_64 6
-#define S6_GMAC_HOST_PBLKCTRL_SIZ_128 7
-#define S6_GMAC_HOST_PBLKCTRL_SIZ_MASK 0xF
-#define S6_GMAC_HOST_PBLKCTRL_STATENA 16
-#define S6_GMAC_HOST_PBLKCTRL_STATAUTOZ 17
-#define S6_GMAC_HOST_PBLKCTRL_STATCLEAR 18
-#define S6_GMAC_HOST_PBLKCTRL_RGMII 19
-#define S6_GMAC_HOST_INTMASK 0x144
-#define S6_GMAC_HOST_INTSTAT 0x148
-#define S6_GMAC_HOST_INT_TXBURSTOVER 3
-#define S6_GMAC_HOST_INT_TXPREWOVER 4
-#define S6_GMAC_HOST_INT_RXBURSTUNDER 5
-#define S6_GMAC_HOST_INT_RXPOSTRFULL 6
-#define S6_GMAC_HOST_INT_RXPOSTRUNDER 7
-#define S6_GMAC_HOST_RXFIFOHWM 0x14C
-#define S6_GMAC_HOST_CTRLFRAMXP 0x150
-#define S6_GMAC_HOST_DSTADDRLO(n) (0x160 + 8*(n))
-#define S6_GMAC_HOST_DSTADDRHI(n) (0x164 + 8*(n))
-#define S6_GMAC_HOST_DSTMASKLO(n) (0x180 + 8*(n))
-#define S6_GMAC_HOST_DSTMASKHI(n) (0x184 + 8*(n))
-
-#define S6_GMAC_BURST_PREWR 0x1B0
-#define S6_GMAC_BURST_PREWR_LEN 0
-#define S6_GMAC_BURST_PREWR_LEN_MASK ((1 << 20) - 1)
-#define S6_GMAC_BURST_PREWR_CFE 20
-#define S6_GMAC_BURST_PREWR_PPE 21
-#define S6_GMAC_BURST_PREWR_FCS 22
-#define S6_GMAC_BURST_PREWR_PAD 23
-#define S6_GMAC_BURST_POSTRD 0x1D0
-#define S6_GMAC_BURST_POSTRD_LEN 0
-#define S6_GMAC_BURST_POSTRD_LEN_MASK ((1 << 20) - 1)
-#define S6_GMAC_BURST_POSTRD_DROP 20
-
-
-/* data handling */
-
-#define S6_NUM_TX_SKB 8 /* must be larger than TX fifo size */
-#define S6_NUM_RX_SKB 16
-#define S6_MAX_FRLEN 1536
-
-struct s6gmac {
- u32 reg;
- u32 tx_dma;
- u32 rx_dma;
- u32 io;
- u8 tx_chan;
- u8 rx_chan;
- spinlock_t lock;
- u8 tx_skb_i, tx_skb_o;
- u8 rx_skb_i, rx_skb_o;
- struct sk_buff *tx_skb[S6_NUM_TX_SKB];
- struct sk_buff *rx_skb[S6_NUM_RX_SKB];
- unsigned long carry[sizeof(struct net_device_stats) / sizeof(long)];
- unsigned long stats[sizeof(struct net_device_stats) / sizeof(long)];
- struct phy_device *phydev;
- struct {
- struct mii_bus *bus;
- int irq[PHY_MAX_ADDR];
- } mii;
- struct {
- unsigned int mbit;
- u8 giga;
- u8 isup;
- u8 full;
- } link;
-};
-
-static void s6gmac_rx_fillfifo(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- struct sk_buff *skb;
- while ((((u8)(pd->rx_skb_i - pd->rx_skb_o)) < S6_NUM_RX_SKB) &&
- (!s6dmac_fifo_full(pd->rx_dma, pd->rx_chan)) &&
- (skb = netdev_alloc_skb(dev, S6_MAX_FRLEN + 2))) {
- pd->rx_skb[(pd->rx_skb_i++) % S6_NUM_RX_SKB] = skb;
- s6dmac_put_fifo_cache(pd->rx_dma, pd->rx_chan,
- pd->io, (u32)skb->data, S6_MAX_FRLEN);
- }
-}
-
-static void s6gmac_rx_interrupt(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- u32 pfx;
- struct sk_buff *skb;
- while (((u8)(pd->rx_skb_i - pd->rx_skb_o)) >
- s6dmac_pending_count(pd->rx_dma, pd->rx_chan)) {
- skb = pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB];
- pfx = readl(pd->reg + S6_GMAC_BURST_POSTRD);
- if (pfx & (1 << S6_GMAC_BURST_POSTRD_DROP)) {
- dev_kfree_skb_irq(skb);
- } else {
- skb_put(skb, (pfx >> S6_GMAC_BURST_POSTRD_LEN)
- & S6_GMAC_BURST_POSTRD_LEN_MASK);
- skb->protocol = eth_type_trans(skb, dev);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- netif_rx(skb);
- }
- }
-}
-
-static void s6gmac_tx_interrupt(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- while (((u8)(pd->tx_skb_i - pd->tx_skb_o)) >
- s6dmac_pending_count(pd->tx_dma, pd->tx_chan)) {
- dev_kfree_skb_irq(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]);
- }
- if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan))
- netif_wake_queue(dev);
-}
-
-struct s6gmac_statinf {
- unsigned reg_size : 4; /* 0: unused */
- unsigned reg_off : 6;
- unsigned net_index : 6;
-};
-
-#define S6_STATS_B (8 * sizeof(u32))
-#define S6_STATS_C(b, r, f) [b] = { \
- BUILD_BUG_ON_ZERO(r##_SIZE < S6_GMAC_STAT_SIZE_MIN) + \
- BUILD_BUG_ON_ZERO((r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1)) \
- >= (1<<4)) + \
- r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1), \
- BUILD_BUG_ON_ZERO(((unsigned)((r - S6_GMAC_STAT_REGS) / sizeof(u32))) \
- >= ((1<<6)-1)) + \
- (r - S6_GMAC_STAT_REGS) / sizeof(u32), \
- BUILD_BUG_ON_ZERO((offsetof(struct net_device_stats, f)) \
- % sizeof(unsigned long)) + \
- BUILD_BUG_ON_ZERO((((unsigned)(offsetof(struct net_device_stats, f)) \
- / sizeof(unsigned long)) >= (1<<6))) + \
- BUILD_BUG_ON_ZERO((sizeof(((struct net_device_stats *)0)->f) \
- != sizeof(unsigned long))) + \
- (offsetof(struct net_device_stats, f)) / sizeof(unsigned long)},
-
-static const struct s6gmac_statinf statinf[2][S6_STATS_B] = { {
- S6_STATS_C(S6_GMAC_STATCARRY1_RBYT, S6_GMAC_STATRBYT, rx_bytes)
- S6_STATS_C(S6_GMAC_STATCARRY1_RPKT, S6_GMAC_STATRPKT, rx_packets)
- S6_STATS_C(S6_GMAC_STATCARRY1_RFCS, S6_GMAC_STATRFCS, rx_crc_errors)
- S6_STATS_C(S6_GMAC_STATCARRY1_RMCA, S6_GMAC_STATRMCA, multicast)
- S6_STATS_C(S6_GMAC_STATCARRY1_RALN, S6_GMAC_STATRALN, rx_frame_errors)
- S6_STATS_C(S6_GMAC_STATCARRY1_RFLR, S6_GMAC_STATRFLR, rx_length_errors)
- S6_STATS_C(S6_GMAC_STATCARRY1_RCDE, S6_GMAC_STATRCDE, rx_missed_errors)
- S6_STATS_C(S6_GMAC_STATCARRY1_RUND, S6_GMAC_STATRUND, rx_length_errors)
- S6_STATS_C(S6_GMAC_STATCARRY1_ROVR, S6_GMAC_STATROVR, rx_length_errors)
- S6_STATS_C(S6_GMAC_STATCARRY1_RFRG, S6_GMAC_STATRFRG, rx_crc_errors)
- S6_STATS_C(S6_GMAC_STATCARRY1_RJBR, S6_GMAC_STATRJBR, rx_crc_errors)
- S6_STATS_C(S6_GMAC_STATCARRY1_RDRP, S6_GMAC_STATRDRP, rx_dropped)
-}, {
- S6_STATS_C(S6_GMAC_STATCARRY2_TBYT, S6_GMAC_STATTBYT, tx_bytes)
- S6_STATS_C(S6_GMAC_STATCARRY2_TPKT, S6_GMAC_STATTPKT, tx_packets)
- S6_STATS_C(S6_GMAC_STATCARRY2_TEDF, S6_GMAC_STATTEDF, tx_aborted_errors)
- S6_STATS_C(S6_GMAC_STATCARRY2_TXCL, S6_GMAC_STATTXCL, tx_aborted_errors)
- S6_STATS_C(S6_GMAC_STATCARRY2_TNCL, S6_GMAC_STATTNCL, collisions)
- S6_STATS_C(S6_GMAC_STATCARRY2_TDRP, S6_GMAC_STATTDRP, tx_dropped)
- S6_STATS_C(S6_GMAC_STATCARRY2_TJBR, S6_GMAC_STATTJBR, tx_errors)
- S6_STATS_C(S6_GMAC_STATCARRY2_TFCS, S6_GMAC_STATTFCS, tx_errors)
- S6_STATS_C(S6_GMAC_STATCARRY2_TOVR, S6_GMAC_STATTOVR, tx_errors)
- S6_STATS_C(S6_GMAC_STATCARRY2_TUND, S6_GMAC_STATTUND, tx_errors)
- S6_STATS_C(S6_GMAC_STATCARRY2_TFRG, S6_GMAC_STATTFRG, tx_errors)
-} };
-
-static void s6gmac_stats_collect(struct s6gmac *pd,
- const struct s6gmac_statinf *inf)
-{
- int b;
- for (b = 0; b < S6_STATS_B; b++) {
- if (inf[b].reg_size) {
- pd->stats[inf[b].net_index] +=
- readl(pd->reg + S6_GMAC_STAT_REGS
- + sizeof(u32) * inf[b].reg_off);
- }
- }
-}
-
-static void s6gmac_stats_carry(struct s6gmac *pd,
- const struct s6gmac_statinf *inf, u32 mask)
-{
- int b;
- while (mask) {
- b = fls(mask) - 1;
- mask &= ~(1 << b);
- pd->carry[inf[b].net_index] += (1 << inf[b].reg_size);
- }
-}
-
-static inline u32 s6gmac_stats_pending(struct s6gmac *pd, int carry)
-{
- int r = readl(pd->reg + S6_GMAC_STATCARRY(carry)) &
- ~readl(pd->reg + S6_GMAC_STATCARRYMSK(carry));
- return r;
-}
-
-static inline void s6gmac_stats_interrupt(struct s6gmac *pd, int carry)
-{
- u32 mask;
- mask = s6gmac_stats_pending(pd, carry);
- if (mask) {
- writel(mask, pd->reg + S6_GMAC_STATCARRY(carry));
- s6gmac_stats_carry(pd, &statinf[carry][0], mask);
- }
-}
-
-static irqreturn_t s6gmac_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct s6gmac *pd = netdev_priv(dev);
- if (!dev)
- return IRQ_NONE;
- spin_lock(&pd->lock);
- if (s6dmac_termcnt_irq(pd->rx_dma, pd->rx_chan))
- s6gmac_rx_interrupt(dev);
- s6gmac_rx_fillfifo(dev);
- if (s6dmac_termcnt_irq(pd->tx_dma, pd->tx_chan))
- s6gmac_tx_interrupt(dev);
- s6gmac_stats_interrupt(pd, 0);
- s6gmac_stats_interrupt(pd, 1);
- spin_unlock(&pd->lock);
- return IRQ_HANDLED;
-}
-
-static inline void s6gmac_set_dstaddr(struct s6gmac *pd, int n,
- u32 addrlo, u32 addrhi, u32 masklo, u32 maskhi)
-{
- writel(addrlo, pd->reg + S6_GMAC_HOST_DSTADDRLO(n));
- writel(addrhi, pd->reg + S6_GMAC_HOST_DSTADDRHI(n));
- writel(masklo, pd->reg + S6_GMAC_HOST_DSTMASKLO(n));
- writel(maskhi, pd->reg + S6_GMAC_HOST_DSTMASKHI(n));
-}
-
-static inline void s6gmac_stop_device(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- writel(0, pd->reg + S6_GMAC_MACCONF1);
-}
-
-static inline void s6gmac_init_device(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- int is_rgmii = !!(pd->phydev->supported
- & (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half));
-#if 0
- writel(1 << S6_GMAC_MACCONF1_SYNCTX |
- 1 << S6_GMAC_MACCONF1_SYNCRX |
- 1 << S6_GMAC_MACCONF1_TXFLOWCTRL |
- 1 << S6_GMAC_MACCONF1_RXFLOWCTRL |
- 1 << S6_GMAC_MACCONF1_RESTXFUNC |
- 1 << S6_GMAC_MACCONF1_RESRXFUNC |
- 1 << S6_GMAC_MACCONF1_RESTXMACCTRL |
- 1 << S6_GMAC_MACCONF1_RESRXMACCTRL,
- pd->reg + S6_GMAC_MACCONF1);
-#endif
- writel(1 << S6_GMAC_MACCONF1_SOFTRES, pd->reg + S6_GMAC_MACCONF1);
- udelay(1000);
- writel(1 << S6_GMAC_MACCONF1_TXENA | 1 << S6_GMAC_MACCONF1_RXENA,
- pd->reg + S6_GMAC_MACCONF1);
- writel(1 << S6_GMAC_HOST_PBLKCTRL_TXSRES |
- 1 << S6_GMAC_HOST_PBLKCTRL_RXSRES,
- pd->reg + S6_GMAC_HOST_PBLKCTRL);
- writel(S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ |
- S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ |
- 1 << S6_GMAC_HOST_PBLKCTRL_STATENA |
- 1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR |
- is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII,
- pd->reg + S6_GMAC_HOST_PBLKCTRL);
- writel(1 << S6_GMAC_MACCONF1_TXENA |
- 1 << S6_GMAC_MACCONF1_RXENA |
- (dev->flags & IFF_LOOPBACK ? 1 : 0)
- << S6_GMAC_MACCONF1_LOOPBACK,
- pd->reg + S6_GMAC_MACCONF1);
- writel(dev->mtu && (dev->mtu < (S6_MAX_FRLEN - ETH_HLEN-ETH_FCS_LEN)) ?
- dev->mtu+ETH_HLEN+ETH_FCS_LEN : S6_MAX_FRLEN,
- pd->reg + S6_GMAC_MACMAXFRAMELEN);
- writel((pd->link.full ? 1 : 0) << S6_GMAC_MACCONF2_FULL |
- 1 << S6_GMAC_MACCONF2_PADCRCENA |
- 1 << S6_GMAC_MACCONF2_LENGTHFCHK |
- (pd->link.giga ?
- S6_GMAC_MACCONF2_IFMODE_BYTE :
- S6_GMAC_MACCONF2_IFMODE_NIBBLE)
- << S6_GMAC_MACCONF2_IFMODE |
- 7 << S6_GMAC_MACCONF2_PREAMBLELEN,
- pd->reg + S6_GMAC_MACCONF2);
- writel(0, pd->reg + S6_GMAC_MACSTATADDR1);
- writel(0, pd->reg + S6_GMAC_MACSTATADDR2);
- writel(1 << S6_GMAC_FIFOCONF0_WTMENREQ |
- 1 << S6_GMAC_FIFOCONF0_SRFENREQ |
- 1 << S6_GMAC_FIFOCONF0_FRFENREQ |
- 1 << S6_GMAC_FIFOCONF0_STFENREQ |
- 1 << S6_GMAC_FIFOCONF0_FTFENREQ,
- pd->reg + S6_GMAC_FIFOCONF0);
- writel(128 << S6_GMAC_FIFOCONF3_CFGFTTH |
- 128 << S6_GMAC_FIFOCONF3_CFGHWMFT,
- pd->reg + S6_GMAC_FIFOCONF3);
- writel((S6_GMAC_FIFOCONF_RSV_MASK & ~(
- 1 << S6_GMAC_FIFOCONF_RSV_RUNT |
- 1 << S6_GMAC_FIFOCONF_RSV_CRCERR |
- 1 << S6_GMAC_FIFOCONF_RSV_OK |
- 1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE |
- 1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME |
- 1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL |
- 1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE |
- 1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED)) |
- 1 << S6_GMAC_FIFOCONF5_DROPLT64 |
- pd->link.giga << S6_GMAC_FIFOCONF5_CFGBYTM |
- 1 << S6_GMAC_FIFOCONF5_RXDROPSIZE,
- pd->reg + S6_GMAC_FIFOCONF5);
- writel(1 << S6_GMAC_FIFOCONF_RSV_RUNT |
- 1 << S6_GMAC_FIFOCONF_RSV_CRCERR |
- 1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE |
- 1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME |
- 1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL |
- 1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE |
- 1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED,
- pd->reg + S6_GMAC_FIFOCONF4);
- s6gmac_set_dstaddr(pd, 0,
- 0xFFFFFFFF, 0x0000FFFF, 0xFFFFFFFF, 0x0000FFFF);
- s6gmac_set_dstaddr(pd, 1,
- dev->dev_addr[5] |
- dev->dev_addr[4] << 8 |
- dev->dev_addr[3] << 16 |
- dev->dev_addr[2] << 24,
- dev->dev_addr[1] |
- dev->dev_addr[0] << 8,
- 0xFFFFFFFF, 0x0000FFFF);
- s6gmac_set_dstaddr(pd, 2,
- 0x00000000, 0x00000100, 0x00000000, 0x00000100);
- s6gmac_set_dstaddr(pd, 3,
- 0x00000000, 0x00000000, 0x00000000, 0x00000000);
- writel(1 << S6_GMAC_HOST_PBLKCTRL_TXENA |
- 1 << S6_GMAC_HOST_PBLKCTRL_RXENA |
- S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ |
- S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ |
- 1 << S6_GMAC_HOST_PBLKCTRL_STATENA |
- 1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR |
- is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII,
- pd->reg + S6_GMAC_HOST_PBLKCTRL);
-}
-
-static void s6mii_enable(struct s6gmac *pd)
-{
- writel(readl(pd->reg + S6_GMAC_MACCONF1) &
- ~(1 << S6_GMAC_MACCONF1_SOFTRES),
- pd->reg + S6_GMAC_MACCONF1);
- writel((readl(pd->reg + S6_GMAC_MACMIICONF)
- & ~(S6_GMAC_MACMIICONF_CSEL_MASK << S6_GMAC_MACMIICONF_CSEL))
- | (S6_GMAC_MACMIICONF_CSEL_DIV168 << S6_GMAC_MACMIICONF_CSEL),
- pd->reg + S6_GMAC_MACMIICONF);
-}
-
-static int s6mii_busy(struct s6gmac *pd, int tmo)
-{
- while (readl(pd->reg + S6_GMAC_MACMIIINDI)) {
- if (--tmo == 0)
- return -ETIME;
- udelay(64);
- }
- return 0;
-}
-
-static int s6mii_read(struct mii_bus *bus, int phy_addr, int regnum)
-{
- struct s6gmac *pd = bus->priv;
- s6mii_enable(pd);
- if (s6mii_busy(pd, 256))
- return -ETIME;
- writel(phy_addr << S6_GMAC_MACMIIADDR_PHY |
- regnum << S6_GMAC_MACMIIADDR_REG,
- pd->reg + S6_GMAC_MACMIIADDR);
- writel(1 << S6_GMAC_MACMIICMD_READ, pd->reg + S6_GMAC_MACMIICMD);
- writel(0, pd->reg + S6_GMAC_MACMIICMD);
- if (s6mii_busy(pd, 256))
- return -ETIME;
- return (u16)readl(pd->reg + S6_GMAC_MACMIISTAT);
-}
-
-static int s6mii_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
-{
- struct s6gmac *pd = bus->priv;
- s6mii_enable(pd);
- if (s6mii_busy(pd, 256))
- return -ETIME;
- writel(phy_addr << S6_GMAC_MACMIIADDR_PHY |
- regnum << S6_GMAC_MACMIIADDR_REG,
- pd->reg + S6_GMAC_MACMIIADDR);
- writel(value, pd->reg + S6_GMAC_MACMIICTRL);
- if (s6mii_busy(pd, 256))
- return -ETIME;
- return 0;
-}
-
-static int s6mii_reset(struct mii_bus *bus)
-{
- struct s6gmac *pd = bus->priv;
- s6mii_enable(pd);
- if (s6mii_busy(pd, PHY_INIT_TIMEOUT))
- return -ETIME;
- return 0;
-}
-
-static void s6gmac_set_rgmii_txclock(struct s6gmac *pd)
-{
- u32 pllsel = readl(S6_REG_GREG1 + S6_GREG1_PLLSEL);
- pllsel &= ~(S6_GREG1_PLLSEL_GMAC_MASK << S6_GREG1_PLLSEL_GMAC);
- switch (pd->link.mbit) {
- case 10:
- pllsel |= S6_GREG1_PLLSEL_GMAC_2500KHZ << S6_GREG1_PLLSEL_GMAC;
- break;
- case 100:
- pllsel |= S6_GREG1_PLLSEL_GMAC_25MHZ << S6_GREG1_PLLSEL_GMAC;
- break;
- case 1000:
- pllsel |= S6_GREG1_PLLSEL_GMAC_125MHZ << S6_GREG1_PLLSEL_GMAC;
- break;
- default:
- return;
- }
- writel(pllsel, S6_REG_GREG1 + S6_GREG1_PLLSEL);
-}
-
-static inline void s6gmac_linkisup(struct net_device *dev, int isup)
-{
- struct s6gmac *pd = netdev_priv(dev);
- struct phy_device *phydev = pd->phydev;
-
- pd->link.full = phydev->duplex;
- pd->link.giga = (phydev->speed == 1000);
- if (pd->link.mbit != phydev->speed) {
- pd->link.mbit = phydev->speed;
- s6gmac_set_rgmii_txclock(pd);
- }
- pd->link.isup = isup;
- if (isup)
- netif_carrier_on(dev);
- phy_print_status(phydev);
-}
-
-static void s6gmac_adjust_link(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- struct phy_device *phydev = pd->phydev;
- if (pd->link.isup &&
- (!phydev->link ||
- (pd->link.mbit != phydev->speed) ||
- (pd->link.full != phydev->duplex))) {
- pd->link.isup = 0;
- netif_tx_disable(dev);
- if (!phydev->link) {
- netif_carrier_off(dev);
- phy_print_status(phydev);
- }
- }
- if (!pd->link.isup && phydev->link) {
- if (pd->link.full != phydev->duplex) {
- u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2);
- if (phydev->duplex)
- maccfg |= 1 << S6_GMAC_MACCONF2_FULL;
- else
- maccfg &= ~(1 << S6_GMAC_MACCONF2_FULL);
- writel(maccfg, pd->reg + S6_GMAC_MACCONF2);
- }
-
- if (pd->link.giga != (phydev->speed == 1000)) {
- u32 fifocfg = readl(pd->reg + S6_GMAC_FIFOCONF5);
- u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2);
- maccfg &= ~(S6_GMAC_MACCONF2_IFMODE_MASK
- << S6_GMAC_MACCONF2_IFMODE);
- if (phydev->speed == 1000) {
- fifocfg |= 1 << S6_GMAC_FIFOCONF5_CFGBYTM;
- maccfg |= S6_GMAC_MACCONF2_IFMODE_BYTE
- << S6_GMAC_MACCONF2_IFMODE;
- } else {
- fifocfg &= ~(1 << S6_GMAC_FIFOCONF5_CFGBYTM);
- maccfg |= S6_GMAC_MACCONF2_IFMODE_NIBBLE
- << S6_GMAC_MACCONF2_IFMODE;
- }
- writel(fifocfg, pd->reg + S6_GMAC_FIFOCONF5);
- writel(maccfg, pd->reg + S6_GMAC_MACCONF2);
- }
-
- if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan))
- netif_wake_queue(dev);
- s6gmac_linkisup(dev, 1);
- }
-}
-
-static inline int s6gmac_phy_start(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- int i = 0;
- struct phy_device *p = NULL;
- while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i])))
- i++;
- p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link,
- PHY_INTERFACE_MODE_RGMII);
- if (IS_ERR(p)) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
- return PTR_ERR(p);
- }
- p->supported &= PHY_GBIT_FEATURES;
- p->advertising = p->supported;
- pd->phydev = p;
- return 0;
-}
-
-static inline void s6gmac_init_stats(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- u32 mask;
- mask = 1 << S6_GMAC_STATCARRY1_RDRP |
- 1 << S6_GMAC_STATCARRY1_RJBR |
- 1 << S6_GMAC_STATCARRY1_RFRG |
- 1 << S6_GMAC_STATCARRY1_ROVR |
- 1 << S6_GMAC_STATCARRY1_RUND |
- 1 << S6_GMAC_STATCARRY1_RCDE |
- 1 << S6_GMAC_STATCARRY1_RFLR |
- 1 << S6_GMAC_STATCARRY1_RALN |
- 1 << S6_GMAC_STATCARRY1_RMCA |
- 1 << S6_GMAC_STATCARRY1_RFCS |
- 1 << S6_GMAC_STATCARRY1_RPKT |
- 1 << S6_GMAC_STATCARRY1_RBYT;
- writel(mask, pd->reg + S6_GMAC_STATCARRY(0));
- writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(0));
- mask = 1 << S6_GMAC_STATCARRY2_TDRP |
- 1 << S6_GMAC_STATCARRY2_TNCL |
- 1 << S6_GMAC_STATCARRY2_TXCL |
- 1 << S6_GMAC_STATCARRY2_TEDF |
- 1 << S6_GMAC_STATCARRY2_TPKT |
- 1 << S6_GMAC_STATCARRY2_TBYT |
- 1 << S6_GMAC_STATCARRY2_TFRG |
- 1 << S6_GMAC_STATCARRY2_TUND |
- 1 << S6_GMAC_STATCARRY2_TOVR |
- 1 << S6_GMAC_STATCARRY2_TFCS |
- 1 << S6_GMAC_STATCARRY2_TJBR;
- writel(mask, pd->reg + S6_GMAC_STATCARRY(1));
- writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(1));
-}
-
-static inline void s6gmac_init_dmac(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- s6dmac_disable_chan(pd->tx_dma, pd->tx_chan);
- s6dmac_disable_chan(pd->rx_dma, pd->rx_chan);
- s6dmac_disable_error_irqs(pd->tx_dma, 1 << S6_HIFDMA_GMACTX);
- s6dmac_disable_error_irqs(pd->rx_dma, 1 << S6_HIFDMA_GMACRX);
-}
-
-static int s6gmac_tx(struct sk_buff *skb, struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- unsigned long flags;
-
- spin_lock_irqsave(&pd->lock, flags);
- writel(skb->len << S6_GMAC_BURST_PREWR_LEN |
- 0 << S6_GMAC_BURST_PREWR_CFE |
- 1 << S6_GMAC_BURST_PREWR_PPE |
- 1 << S6_GMAC_BURST_PREWR_FCS |
- ((skb->len < ETH_ZLEN) ? 1 : 0) << S6_GMAC_BURST_PREWR_PAD,
- pd->reg + S6_GMAC_BURST_PREWR);
- s6dmac_put_fifo_cache(pd->tx_dma, pd->tx_chan,
- (u32)skb->data, pd->io, skb->len);
- if (s6dmac_fifo_full(pd->tx_dma, pd->tx_chan))
- netif_stop_queue(dev);
- if (((u8)(pd->tx_skb_i - pd->tx_skb_o)) >= S6_NUM_TX_SKB) {
- printk(KERN_ERR "GMAC BUG: skb tx ring overflow [%x, %x]\n",
- pd->tx_skb_o, pd->tx_skb_i);
- BUG();
- }
- pd->tx_skb[(pd->tx_skb_i++) % S6_NUM_TX_SKB] = skb;
- spin_unlock_irqrestore(&pd->lock, flags);
- return 0;
-}
-
-static void s6gmac_tx_timeout(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- unsigned long flags;
- spin_lock_irqsave(&pd->lock, flags);
- s6gmac_tx_interrupt(dev);
- spin_unlock_irqrestore(&pd->lock, flags);
-}
-
-static int s6gmac_open(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- unsigned long flags;
- phy_read_status(pd->phydev);
- spin_lock_irqsave(&pd->lock, flags);
- pd->link.mbit = 0;
- s6gmac_linkisup(dev, pd->phydev->link);
- s6gmac_init_device(dev);
- s6gmac_init_stats(dev);
- s6gmac_init_dmac(dev);
- s6gmac_rx_fillfifo(dev);
- s6dmac_enable_chan(pd->rx_dma, pd->rx_chan,
- 2, 1, 0, 1, 0, 0, 0, 7, -1, 2, 0, 1);
- s6dmac_enable_chan(pd->tx_dma, pd->tx_chan,
- 2, 0, 1, 0, 0, 0, 0, 7, -1, 2, 0, 1);
- writel(0 << S6_GMAC_HOST_INT_TXBURSTOVER |
- 0 << S6_GMAC_HOST_INT_TXPREWOVER |
- 0 << S6_GMAC_HOST_INT_RXBURSTUNDER |
- 0 << S6_GMAC_HOST_INT_RXPOSTRFULL |
- 0 << S6_GMAC_HOST_INT_RXPOSTRUNDER,
- pd->reg + S6_GMAC_HOST_INTMASK);
- spin_unlock_irqrestore(&pd->lock, flags);
- phy_start(pd->phydev);
- netif_start_queue(dev);
- return 0;
-}
-
-static int s6gmac_stop(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- unsigned long flags;
- netif_stop_queue(dev);
- phy_stop(pd->phydev);
- spin_lock_irqsave(&pd->lock, flags);
- s6gmac_init_dmac(dev);
- s6gmac_stop_device(dev);
- while (pd->tx_skb_i != pd->tx_skb_o)
- dev_kfree_skb(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]);
- while (pd->rx_skb_i != pd->rx_skb_o)
- dev_kfree_skb(pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB]);
- spin_unlock_irqrestore(&pd->lock, flags);
- return 0;
-}
-
-static struct net_device_stats *s6gmac_stats(struct net_device *dev)
-{
- struct s6gmac *pd = netdev_priv(dev);
- struct net_device_stats *st = (struct net_device_stats *)&pd->stats;
- int i;
- do {
- unsigned long flags;
- spin_lock_irqsave(&pd->lock, flags);
- for (i = 0; i < ARRAY_SIZE(pd->stats); i++)
- pd->stats[i] =
- pd->carry[i] << (S6_GMAC_STAT_SIZE_MIN - 1);
- s6gmac_stats_collect(pd, &statinf[0][0]);
- s6gmac_stats_collect(pd, &statinf[1][0]);
- i = s6gmac_stats_pending(pd, 0) |
- s6gmac_stats_pending(pd, 1);
- spin_unlock_irqrestore(&pd->lock, flags);
- } while (i);
- st->rx_errors = st->rx_crc_errors +
- st->rx_frame_errors +
- st->rx_length_errors +
- st->rx_missed_errors;
- st->tx_errors += st->tx_aborted_errors;
- return st;
-}
-
-static int s6gmac_probe(struct platform_device *pdev)
-{
- struct net_device *dev;
- struct s6gmac *pd;
- int res;
- unsigned long i;
- struct mii_bus *mb;
-
- dev = alloc_etherdev(sizeof(*pd));
- if (!dev)
- return -ENOMEM;
-
- dev->open = s6gmac_open;
- dev->stop = s6gmac_stop;
- dev->hard_start_xmit = s6gmac_tx;
- dev->tx_timeout = s6gmac_tx_timeout;
- dev->watchdog_timeo = HZ;
- dev->get_stats = s6gmac_stats;
- dev->irq = platform_get_irq(pdev, 0);
- pd = netdev_priv(dev);
- memset(pd, 0, sizeof(*pd));
- spin_lock_init(&pd->lock);
- pd->reg = platform_get_resource(pdev, IORESOURCE_MEM, 0)->start;
- i = platform_get_resource(pdev, IORESOURCE_DMA, 0)->start;
- pd->tx_dma = DMA_MASK_DMAC(i);
- pd->tx_chan = DMA_INDEX_CHNL(i);
- i = platform_get_resource(pdev, IORESOURCE_DMA, 1)->start;
- pd->rx_dma = DMA_MASK_DMAC(i);
- pd->rx_chan = DMA_INDEX_CHNL(i);
- pd->io = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
- res = request_irq(dev->irq, s6gmac_interrupt, 0, dev->name, dev);
- if (res) {
- printk(KERN_ERR DRV_PRMT "irq request failed: %d\n", dev->irq);
- goto errirq;
- }
- res = register_netdev(dev);
- if (res) {
- printk(KERN_ERR DRV_PRMT "error registering device %s\n",
- dev->name);
- goto errdev;
- }
- mb = mdiobus_alloc();
- if (!mb) {
- printk(KERN_ERR DRV_PRMT "error allocating mii bus\n");
- res = -ENOMEM;
- goto errmii;
- }
- mb->name = "s6gmac_mii";
- mb->read = s6mii_read;
- mb->write = s6mii_write;
- mb->reset = s6mii_reset;
- mb->priv = pd;
- snprintf(mb->id, MII_BUS_ID_SIZE, "%s-%x", pdev->name, pdev->id);
- mb->phy_mask = ~(1 << 0);
- mb->irq = &pd->mii.irq[0];
- for (i = 0; i < PHY_MAX_ADDR; i++) {
- int n = platform_get_irq(pdev, i + 1);
- if (n < 0)
- n = PHY_POLL;
- pd->mii.irq[i] = n;
- }
- mdiobus_register(mb);
- pd->mii.bus = mb;
- res = s6gmac_phy_start(dev);
- if (res)
- return res;
- platform_set_drvdata(pdev, dev);
- return 0;
-errmii:
- unregister_netdev(dev);
-errdev:
- free_irq(dev->irq, dev);
-errirq:
- free_netdev(dev);
- return res;
-}
-
-static int s6gmac_remove(struct platform_device *pdev)
-{
- struct net_device *dev = platform_get_drvdata(pdev);
- if (dev) {
- struct s6gmac *pd = netdev_priv(dev);
- mdiobus_unregister(pd->mii.bus);
- unregister_netdev(dev);
- free_irq(dev->irq, dev);
- free_netdev(dev);
- }
- return 0;
-}
-
-static struct platform_driver s6gmac_driver = {
- .probe = s6gmac_probe,
- .remove = s6gmac_remove,
- .driver = {
- .name = "s6gmac",
- },
-};
-
-module_platform_driver(s6gmac_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("S6105 on chip Ethernet driver");
-MODULE_AUTHOR("Oskar Schirmer <oskar@scara.com>");
* 0 on success and an appropriate (-)ve integer as defined in errno.h
* file on failure.
*/
-static int stmmac_hw_setup(struct net_device *dev)
+static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
{
struct stmmac_priv *priv = netdev_priv(dev);
int ret;
stmmac_mmc_setup(priv);
- ret = stmmac_init_ptp(priv);
- if (ret && ret != -EOPNOTSUPP)
- pr_warn("%s: failed PTP initialisation\n", __func__);
+ if (init_ptp) {
+ ret = stmmac_init_ptp(priv);
+ if (ret && ret != -EOPNOTSUPP)
+ pr_warn("%s: failed PTP initialisation\n", __func__);
+ }
#ifdef CONFIG_DEBUG_FS
ret = stmmac_init_fs(dev);
goto init_error;
}
- ret = stmmac_hw_setup(dev);
+ ret = stmmac_hw_setup(dev, true);
if (ret < 0) {
pr_err("%s: Hw setup failed\n", __func__);
goto init_error;
netif_device_attach(ndev);
init_dma_desc_rings(ndev, GFP_ATOMIC);
- stmmac_hw_setup(ndev);
+ stmmac_hw_setup(ndev, false);
stmmac_init_tx_coalesce(priv);
napi_enable(&priv->napi);
.remove = stmmac_pltfr_remove,
.driver = {
.name = STMMAC_RESOURCE_NAME,
- .owner = THIS_MODULE,
.pm = &stmmac_pltfr_pm_ops,
.of_match_table = of_match_ptr(stmmac_dt_ids),
},
segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO);
if (IS_ERR(segs)) {
dev->stats.tx_dropped++;
+ dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
static irqreturn_t cpsw_interrupt(int irq, void *dev_id)
{
struct cpsw_priv *priv = dev_id;
+ int value = irq - priv->irqs_table[0];
+
+ /* NOTICE: Ending IRQ here. The trick with the 'value' variable above
+ * is to make sure we will always write the correct value to the EOI
+ * register. Namely 0 for RX_THRESH Interrupt, 1 for RX Interrupt, 2
+ * for TX Interrupt and 3 for MISC Interrupt.
+ */
+ cpdma_ctlr_eoi(priv->dma, value);
cpsw_intr_disable(priv);
if (priv->irq_enabled == true) {
int num_tx, num_rx;
num_tx = cpdma_chan_process(priv->txch, 128);
- if (num_tx)
- cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX);
num_rx = cpdma_chan_process(priv->rxch, budget);
if (num_rx < budget) {
napi_complete(napi);
cpsw_intr_enable(priv);
- cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX);
prim_cpsw = cpsw_get_slave_priv(priv, 0);
if (prim_cpsw->irq_enabled == false) {
prim_cpsw->irq_enabled = true;
napi_enable(&priv->napi);
cpdma_ctlr_start(priv->dma);
cpsw_intr_enable(priv);
- cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX);
- cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX);
prim_cpsw = cpsw_get_slave_priv(priv, 0);
if (prim_cpsw->irq_enabled == false) {
cpdma_chan_start(priv->txch);
cpdma_ctlr_int_ctrl(priv->dma, true);
cpsw_intr_enable(priv);
- cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX);
- cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX);
-
}
static int cpsw_ndo_set_mac_address(struct net_device *ndev, void *p)
cpsw_interrupt(ndev->irq, priv);
cpdma_ctlr_int_ctrl(priv->dma, true);
cpsw_intr_enable(priv);
- cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX);
- cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX);
-
}
#endif
lp->regs = of_iomap(op->dev.of_node, 0);
if (!lp->regs) {
dev_err(&op->dev, "could not map temac regs.\n");
+ rc = -ENOMEM;
goto nodev;
}
np = of_parse_phandle(op->dev.of_node, "llink-connected", 0);
if (!np) {
dev_err(&op->dev, "could not find DMA node\n");
+ rc = -ENODEV;
goto err_iounmap;
}
* @dma_err_tasklet: Tasklet structure to process Axi DMA errors
* @tx_irq: Axidma TX IRQ number
* @rx_irq: Axidma RX IRQ number
- * @temac_type: axienet type to identify between soft and hard temac
* @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X
* @options: AxiEthernet option word
* @last_link: Phy link state in which the PHY was negotiated earlier
int tx_irq;
int rx_irq;
- u32 temac_type;
u32 phy_type;
u32 options; /* Current options word */
lp->regs = of_iomap(op->dev.of_node, 0);
if (!lp->regs) {
dev_err(&op->dev, "could not map Axi Ethernet regs.\n");
+ ret = -ENOMEM;
goto nodev;
}
/* Setup checksum offload, but default to off if not specified */
if ((be32_to_cpup(p)) >= 0x4000)
lp->jumbo_support = 1;
}
- p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type",
- NULL);
- if (p)
- lp->temac_type = be32_to_cpup(p);
p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,phy-type", NULL);
if (p)
lp->phy_type = be32_to_cpup(p);
np = of_parse_phandle(op->dev.of_node, "axistream-connected", 0);
if (!np) {
dev_err(&op->dev, "could not find DMA node\n");
+ ret = -ENODEV;
goto err_iounmap;
}
lp->dma_regs = of_iomap(np, 0);
res = platform_get_resource(ofdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(dev, "no IRQ found\n");
+ rc = -ENXIO;
goto error;
}
#define NETVSC_RECEIVE_BUFFER_ID 0xcafe
+#define NETVSC_SEND_BUFFER_ID 0
#define NETVSC_PACKET_SIZE 4096
/* Deal with the send buffer we may have setup.
* If we got a send section size, it means we received a
- * SendsendBufferComplete msg (ie sent
- * NvspMessage1TypeSendReceiveBuffer msg) therefore, we need
+ * NVSP_MSG1_TYPE_SEND_SEND_BUF_COMPLETE msg (ie sent
+ * NVSP_MSG1_TYPE_SEND_SEND_BUF msg) therefore, we need
* to send a revoke msg here
*/
if (net_device->send_section_size) {
revoke_packet->hdr.msg_type =
NVSP_MSG1_TYPE_REVOKE_SEND_BUF;
- revoke_packet->msg.v1_msg.revoke_recv_buf.id = 0;
+ revoke_packet->msg.v1_msg.revoke_send_buf.id =
+ NETVSC_SEND_BUFFER_ID;
ret = vmbus_sendpacket(net_device->dev->channel,
revoke_packet,
net_device->send_buf_gpadl_handle = 0;
}
if (net_device->send_buf) {
- /* Free up the receive buffer */
+ /* Free up the send buffer */
vfree(net_device->send_buf);
net_device->send_buf = NULL;
}
init_packet = &net_device->channel_init_pkt;
memset(init_packet, 0, sizeof(struct nvsp_message));
init_packet->hdr.msg_type = NVSP_MSG1_TYPE_SEND_SEND_BUF;
- init_packet->msg.v1_msg.send_recv_buf.gpadl_handle =
+ init_packet->msg.v1_msg.send_send_buf.gpadl_handle =
net_device->send_buf_gpadl_handle;
- init_packet->msg.v1_msg.send_recv_buf.id = 0;
+ init_packet->msg.v1_msg.send_send_buf.id = NETVSC_SEND_BUFFER_ID;
/* Send the gpadl notification request */
ret = vmbus_sendpacket(device->channel, init_packet,
netdev_err(ndev, "Unable to complete send buffer "
"initialization with NetVsp - status %d\n",
init_packet->msg.v1_msg.
- send_recv_buf_complete.status);
+ send_send_buf_complete.status);
ret = -EINVAL;
goto cleanup;
}
static const struct kszphy_type ksz8021_type = {
.led_mode_reg = MII_KSZPHY_CTRL_2,
+ .has_broadcast_disable = true,
.has_rmii_ref_clk_sel = true,
};
return 0;
}
-static int ksz8021_config_init(struct phy_device *phydev)
-{
- int rc;
-
- rc = kszphy_config_init(phydev);
- if (rc)
- return rc;
-
- rc = kszphy_broadcast_disable(phydev);
-
- return rc < 0 ? rc : 0;
-}
-
static int ksz9021_load_values_from_of(struct phy_device *phydev,
struct device_node *of_node, u16 reg,
char *field1, char *field2,
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.driver_data = &ksz8021_type,
.probe = kszphy_probe,
- .config_init = ksz8021_config_init,
+ .config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.driver_data = &ksz8021_type,
.probe = kszphy_probe,
- .config_init = ksz8021_config_init,
+ .config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
/* default ethernet address used by the modem */
static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3};
+static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00};
+
/* Make up an ethernet header if the packet doesn't have one.
*
* A firmware bug common among several devices cause them to send raw
usb_driver_release_interface(driver, info->data);
}
- /* Never use the same address on both ends of the link, even
- * if the buggy firmware told us to.
+ /* Never use the same address on both ends of the link, even if the
+ * buggy firmware told us to. Or, if device is assigned the well-known
+ * buggy firmware MAC address, replace it with a random address,
*/
- if (ether_addr_equal(dev->net->dev_addr, default_modem_addr))
+ if (ether_addr_equal(dev->net->dev_addr, default_modem_addr) ||
+ ether_addr_equal(dev->net->dev_addr, buggy_fw_addr))
eth_hw_addr_random(dev->net);
/* make MAC addr easily distinguishable from an IP header */
netif_wake_queue(netdev);
}
+static netdev_features_t
+rtl8152_features_check(struct sk_buff *skb, struct net_device *dev,
+ netdev_features_t features)
+{
+ u32 mss = skb_shinfo(skb)->gso_size;
+ int max_offset = mss ? GTTCPHO_MAX : TCPHO_MAX;
+ int offset = skb_transport_offset(skb);
+
+ if ((mss || skb->ip_summed == CHECKSUM_PARTIAL) && offset > max_offset)
+ features &= ~(NETIF_F_ALL_CSUM | NETIF_F_GSO_MASK);
+ else if ((skb->len + sizeof(struct tx_desc)) > agg_buf_sz)
+ features &= ~NETIF_F_GSO_MASK;
+
+ return features;
+}
+
static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
struct net_device *netdev)
{
.ndo_set_mac_address = rtl8152_set_mac_address,
.ndo_change_mtu = rtl8152_change_mtu,
.ndo_validate_addr = eth_validate_addr,
+ .ndo_features_check = rtl8152_features_check,
};
static void r8152b_get_version(struct r8152 *tp)
container_of(napi, struct receive_queue, napi);
unsigned int r, received = 0;
-again:
received += virtnet_receive(rq, budget - received);
/* Out of packets? */
napi_schedule_prep(napi)) {
virtqueue_disable_cb(rq->vq);
__napi_schedule(napi);
- goto again;
}
}
bool udp_sum = !udp_get_no_check6_tx(vs->sock->sk);
skb = udp_tunnel_handle_offloads(skb, udp_sum);
- if (IS_ERR(skb))
- return -EINVAL;
+ if (IS_ERR(skb)) {
+ err = -EINVAL;
+ goto err;
+ }
skb_scrub_packet(skb, xnet);
/* Need space for new headers (invalidates iph ptr) */
err = skb_cow_head(skb, min_headroom);
- if (unlikely(err))
- return err;
+ if (unlikely(err)) {
+ kfree_skb(skb);
+ goto err;
+ }
skb = vlan_hwaccel_push_inside(skb);
- if (WARN_ON(!skb))
- return -ENOMEM;
+ if (WARN_ON(!skb)) {
+ err = -ENOMEM;
+ goto err;
+ }
vxh = (struct vxlanhdr *) __skb_push(skb, sizeof(*vxh));
vxh->vx_flags = htonl(VXLAN_FLAGS);
udp_tunnel6_xmit_skb(vs->sock, dst, skb, dev, saddr, daddr, prio,
ttl, src_port, dst_port);
return 0;
+err:
+ dst_release(dst);
+ return err;
}
#endif
skb = udp_tunnel_handle_offloads(skb, udp_sum);
if (IS_ERR(skb))
- return -EINVAL;
+ return PTR_ERR(skb);
min_headroom = LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len
+ VXLAN_HLEN + sizeof(struct iphdr)
/* Need space for new headers (invalidates iph ptr) */
err = skb_cow_head(skb, min_headroom);
- if (unlikely(err))
+ if (unlikely(err)) {
+ kfree_skb(skb);
return err;
+ }
skb = vlan_hwaccel_push_inside(skb);
if (WARN_ON(!skb))
tos, ttl, df, src_port, dst_port,
htonl(vni << 8),
!net_eq(vxlan->net, dev_net(vxlan->dev)));
-
- if (err < 0)
+ if (err < 0) {
+ /* skb is already freed. */
+ skb = NULL;
goto rt_tx_error;
+ }
+
iptunnel_xmit_stats(err, &dev->stats, dev->tstats);
#if IS_ENABLED(CONFIG_IPV6)
} else {
*/
if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
- (sdiodev->pdata->oob_irq_supported)))
+ (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
bus_if->wowl_supported = true;
#endif
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
brcmf_dbg(SDIO, "Enter\n");
- if (sdiodev->pdata->oob_irq_supported)
+ if (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)
disable_irq_wake(sdiodev->pdata->oob_irq_nr);
brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
atomic_set(&sdiodev->suspend, false);
config IPW2200
tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
- depends on PCI && CFG80211 && CFG80211_WEXT
+ depends on PCI && CFG80211
+ select CFG80211_WEXT
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
try_again:
/* try next, if any */
- kfree(pieces);
release_firmware(ucode_raw);
if (iwl_request_firmware(drv, false))
goto out_unbind;
+ kfree(pieces);
return;
out_free_fw:
#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000)
#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28
+#define FH_MEM_TB_MAX_LENGTH (0x00020000)
/* TFDB Area - TFDs buffer table */
#define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF)
{
lockdep_assert_held(&mvm->mutex);
- /* disallow low power states when the FW is down */
- iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN);
+ /*
+ * Disallow low power states when the FW is down by taking
+ * the UCODE_DOWN ref. in case of ongoing hw restart the
+ * ref is already taken, so don't take it again.
+ */
+ if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status))
+ iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN);
/* async_handlers_wk is now blocked */
/* the fw is stopped, the aux sta is dead: clean up driver state */
iwl_mvm_del_aux_sta(mvm);
+ /*
+ * Clear IN_HW_RESTART flag when stopping the hw (as restart_complete()
+ * won't be called in this case).
+ */
+ clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status);
+
mvm->ucode_loaded = false;
}
/* 3165 Series */
{IWL_PCI_DEVICE(0x3165, 0x4010, iwl3165_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x3165, 0x4012, iwl3165_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x3165, 0x4110, iwl3165_2ac_cfg)},
{IWL_PCI_DEVICE(0x3165, 0x4210, iwl3165_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x3165, 0x4410, iwl3165_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x3165, 0x4510, iwl3165_2ac_cfg)},
/* 7265 Series */
{IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)},
{
u8 *v_addr;
dma_addr_t p_addr;
- u32 offset, chunk_sz = section->len;
+ u32 offset, chunk_sz = min_t(u32, FH_MEM_TB_MAX_LENGTH, section->len);
int ret = 0;
IWL_DEBUG_FW(trans, "[%d] uCode section being loaded...\n",
/* Stop the device, and put it in low power state */
iwl_pcie_apm_stop(trans);
- /* Upon stop, the APM issues an interrupt if HW RF kill is set.
- * Clean again the interrupt here
+ /* stop and reset the on-board processor */
+ iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
+ udelay(20);
+
+ /*
+ * Upon stop, the APM issues an interrupt if HW RF kill is set.
+ * This is a bug in certain verions of the hardware.
+ * Certain devices also keep sending HW RF kill interrupt all
+ * the time, unless the interrupt is ACKed even if the interrupt
+ * should be masked. Re-ACK all the interrupts here.
*/
spin_lock(&trans_pcie->irq_lock);
iwl_disable_interrupts(trans);
spin_unlock(&trans_pcie->irq_lock);
- /* stop and reset the on-board processor */
- iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
- udelay(20);
/* clear all status bits */
clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
}
queue->remaining_credit = credit_bytes;
+ queue->credit_usec = credit_usec;
err = connect_rings(be, queue);
if (err) {
* @reg_pull: optional separate register for additional pull settings
* @clk: clock of the gpio bank
* @irq: interrupt of the gpio bank
+ * @saved_enables: Saved content of GPIO_INTEN at suspend time.
* @pin_base: first pin number
* @nr_pins: number of pins in this bank
* @name: name of the bank
struct regmap *regmap_pull;
struct clk *clk;
int irq;
+ u32 saved_enables;
u32 pin_base;
u8 nr_pins;
char *name;
return 0;
}
+static void rockchip_irq_suspend(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct rockchip_pin_bank *bank = gc->private;
+
+ bank->saved_enables = irq_reg_readl(gc, GPIO_INTEN);
+ irq_reg_writel(gc, gc->wake_active, GPIO_INTEN);
+}
+
+static void rockchip_irq_resume(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct rockchip_pin_bank *bank = gc->private;
+
+ irq_reg_writel(gc, bank->saved_enables, GPIO_INTEN);
+}
+
+static void rockchip_irq_disable(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ u32 val;
+
+ irq_gc_lock(gc);
+
+ val = irq_reg_readl(gc, GPIO_INTEN);
+ val &= ~d->mask;
+ irq_reg_writel(gc, val, GPIO_INTEN);
+
+ irq_gc_unlock(gc);
+}
+
+static void rockchip_irq_enable(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ u32 val;
+
+ irq_gc_lock(gc);
+
+ val = irq_reg_readl(gc, GPIO_INTEN);
+ val |= d->mask;
+ irq_reg_writel(gc, val, GPIO_INTEN);
+
+ irq_gc_unlock(gc);
+}
+
static int rockchip_interrupts_register(struct platform_device *pdev,
struct rockchip_pinctrl *info)
{
gc = irq_get_domain_generic_chip(bank->domain, 0);
gc->reg_base = bank->reg_base;
gc->private = bank;
- gc->chip_types[0].regs.mask = GPIO_INTEN;
+ gc->chip_types[0].regs.mask = GPIO_INTMASK;
gc->chip_types[0].regs.ack = GPIO_PORTS_EOI;
gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
- gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
- gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
+ gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit;
+ gc->chip_types[0].chip.irq_enable = rockchip_irq_enable;
+ gc->chip_types[0].chip.irq_disable = rockchip_irq_disable;
gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake;
+ gc->chip_types[0].chip.irq_suspend = rockchip_irq_suspend;
+ gc->chip_types[0].chip.irq_resume = rockchip_irq_resume;
gc->chip_types[0].chip.irq_set_type = rockchip_irq_set_type;
gc->wake_enabled = IRQ_MSK(bank->nr_pins);
struct seq_file *s, unsigned pin_id)
{
unsigned long config;
- st_pinconf_get(pctldev, pin_id, &config);
+ mutex_unlock(&pctldev->mutex);
+ st_pinconf_get(pctldev, pin_id, &config);
+ mutex_lock(&pctldev->mutex);
seq_printf(s, "[OE:%ld,PU:%ld,OD:%ld]\n"
"\t\t[retime:%ld,invclk:%ld,clknotdat:%ld,"
"de:%ld,rt-clk:%ld,rt-delay:%ld]",
static struct irq_chip st_gpio_irqchip = {
.name = "GPIO",
+ .irq_disable = st_gpio_irq_mask,
.irq_mask = st_gpio_irq_mask,
.irq_unmask = st_gpio_irq_unmask,
.irq_set_type = st_gpio_irq_set_type,
RAPL_CPU(0x45, rapl_defaults_core),/* Haswell ULT */
RAPL_CPU(0x4C, rapl_defaults_atom),/* Braswell */
RAPL_CPU(0x4A, rapl_defaults_atom),/* Tangier */
+ RAPL_CPU(0x56, rapl_defaults_core),/* Future Xeon */
RAPL_CPU(0x5A, rapl_defaults_atom),/* Annidale */
{}
};
.enable_mask = S2MPS14_ENABLE_MASK \
}
-#define regulator_desc_s2mps14_buck(num, min, step) { \
+#define regulator_desc_s2mps14_buck(num, min, step, min_sel) { \
.name = "BUCK"#num, \
.id = S2MPS14_BUCK##num, \
.ops = &s2mps14_reg_ops, \
.min_uV = min, \
.uV_step = step, \
.n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
- .linear_min_sel = S2MPS14_BUCK1235_START_SEL, \
+ .linear_min_sel = min_sel, \
.ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPS14_REG_B1CTRL2 + (num - 1) * 2, \
.vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
regulator_desc_s2mps14_ldo(23, MIN_800_MV, STEP_25_MV),
regulator_desc_s2mps14_ldo(24, MIN_1800_MV, STEP_25_MV),
regulator_desc_s2mps14_ldo(25, MIN_1800_MV, STEP_25_MV),
- regulator_desc_s2mps14_buck(1, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps14_buck(2, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps14_buck(3, MIN_600_MV, STEP_6_25_MV),
- regulator_desc_s2mps14_buck(4, MIN_1400_MV, STEP_12_5_MV),
- regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV),
+ regulator_desc_s2mps14_buck(1, MIN_600_MV, STEP_6_25_MV,
+ S2MPS14_BUCK1235_START_SEL),
+ regulator_desc_s2mps14_buck(2, MIN_600_MV, STEP_6_25_MV,
+ S2MPS14_BUCK1235_START_SEL),
+ regulator_desc_s2mps14_buck(3, MIN_600_MV, STEP_6_25_MV,
+ S2MPS14_BUCK1235_START_SEL),
+ regulator_desc_s2mps14_buck(4, MIN_1400_MV, STEP_12_5_MV,
+ S2MPS14_BUCK4_START_SEL),
+ regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV,
+ S2MPS14_BUCK1235_START_SEL),
};
static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
#define DRV_NAME "fnic"
#define DRV_DESCRIPTION "Cisco FCoE HBA Driver"
-#define DRV_VERSION "1.6.0.16"
+#define DRV_VERSION "1.6.0.17"
#define PFX DRV_NAME ": "
#define DFX DRV_NAME "%d: "
goto fnic_abort_cmd_end;
}
+ /* IO out of order */
+
+ if (!(CMD_FLAGS(sc) & (FNIC_IO_ABORTED | FNIC_IO_DONE))) {
+ spin_unlock_irqrestore(io_lock, flags);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Issuing Host reset due to out of order IO\n");
+
+ if (fnic_host_reset(sc) == FAILED) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_host_reset failed.\n");
+ }
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+
CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
/*
* Return target busy if we've received a non-zero retry_delay_timer
* in a FCP_RSP.
*/
- if (time_after(jiffies, fcport->retry_delay_timestamp))
+ if (fcport->retry_delay_timestamp == 0) {
+ /* retry delay not set */
+ } else if (time_after(jiffies, fcport->retry_delay_timestamp))
fcport->retry_delay_timestamp = 0;
else
goto qc24_target_busy;
}
/* signal not to enter either branch of the if () below */
timeleft = 0;
- rtn = NEEDS_RETRY;
+ rtn = FAILED;
} else {
timeleft = wait_for_completion_timeout(&done, timeout);
rtn = SUCCESS;
rtn = FAILED;
break;
}
- } else if (!rtn) {
+ } else if (rtn != FAILED) {
scsi_abort_eh_cmnd(scmd);
rtn = FAILED;
}
sd_config_discard(sdkp, SD_LBP_WS16);
} else { /* LBP VPD page tells us what to use */
-
- if (sdkp->lbpws)
+ if (sdkp->lbpu && sdkp->max_unmap_blocks && !sdkp->lbprz)
+ sd_config_discard(sdkp, SD_LBP_UNMAP);
+ else if (sdkp->lbpws)
sd_config_discard(sdkp, SD_LBP_WS16);
else if (sdkp->lbpws10)
sd_config_discard(sdkp, SD_LBP_WS10);
default:
rxconf.src_addr = spfi->phys + SPFI_RX_8BIT_VALID_DATA;
rxconf.src_addr_width = 1;
- rxconf.src_maxburst = 1;
+ rxconf.src_maxburst = 4;
}
dmaengine_slave_config(spfi->rx_ch, &rxconf);
default:
txconf.dst_addr = spfi->phys + SPFI_TX_8BIT_VALID_DATA;
txconf.dst_addr_width = 1;
- txconf.dst_maxburst = 1;
+ txconf.dst_maxburst = 4;
break;
}
dmaengine_slave_config(spfi->tx_ch, &txconf);
dma_async_issue_pending(spfi->rx_ch);
}
+ spfi_start(spfi);
+
if (xfer->tx_buf) {
spfi->tx_dma_busy = true;
dmaengine_submit(txdesc);
dma_async_issue_pending(spfi->tx_ch);
}
- spfi_start(spfi);
-
return 1;
stop_dma:
struct device_node *np = spi->master->dev.of_node;
struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master);
+ pm_runtime_get_sync(&p->pdev->dev);
+
if (!np) {
/*
* Use spi->controller_data for CS (same strategy as spi_gpio),
if (spi->cs_gpio >= 0)
gpio_set_value(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
+
+ pm_runtime_put_sync(&p->pdev->dev);
+
return 0;
}
if ((bits & (MDS_INODELOCK_LOOKUP | MDS_INODELOCK_PERM)) &&
inode->i_sb->s_root != NULL &&
- is_root_inode(inode))
+ !is_root_inode(inode))
ll_invalidate_aliases(inode);
iput(inode);
* Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
* Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org>
*
+ * Copyright (C) 2014 Viresh Kumar <viresh.kumar@linaro.org>
+ *
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/cpu.h>
#include <linux/cpu_cooling.h>
+/*
+ * Cooling state <-> CPUFreq frequency
+ *
+ * Cooling states are translated to frequencies throughout this driver and this
+ * is the relation between them.
+ *
+ * Highest cooling state corresponds to lowest possible frequency.
+ *
+ * i.e.
+ * level 0 --> 1st Max Freq
+ * level 1 --> 2nd Max Freq
+ * ...
+ */
+
/**
* struct cpufreq_cooling_device - data for cooling device with cpufreq
* @id: unique integer value corresponding to each cpufreq_cooling_device
* cooling devices.
* @cpufreq_val: integer value representing the absolute value of the clipped
* frequency.
+ * @max_level: maximum cooling level. One less than total number of valid
+ * cpufreq frequencies.
* @allowed_cpus: all the cpus involved for this cpufreq_cooling_device.
+ * @node: list_head to link all cpufreq_cooling_device together.
*
- * This structure is required for keeping information of each
- * cpufreq_cooling_device registered. In order to prevent corruption of this a
- * mutex lock cooling_cpufreq_lock is used.
+ * This structure is required for keeping information of each registered
+ * cpufreq_cooling_device.
*/
struct cpufreq_cooling_device {
int id;
struct thermal_cooling_device *cool_dev;
unsigned int cpufreq_state;
unsigned int cpufreq_val;
+ unsigned int max_level;
+ unsigned int *freq_table; /* In descending order */
struct cpumask allowed_cpus;
struct list_head node;
};
static DEFINE_IDR(cpufreq_idr);
static DEFINE_MUTEX(cooling_cpufreq_lock);
-static unsigned int cpufreq_dev_count;
-
static LIST_HEAD(cpufreq_dev_list);
/**
/* Below code defines functions to be used for cpufreq as cooling device */
/**
- * is_cpufreq_valid - function to check frequency transitioning capability.
- * @cpu: cpu for which check is needed.
+ * get_level: Find the level for a particular frequency
+ * @cpufreq_dev: cpufreq_dev for which the property is required
+ * @freq: Frequency
*
- * This function will check the current state of the system if
- * it is capable of changing the frequency for a given @cpu.
- *
- * Return: 0 if the system is not currently capable of changing
- * the frequency of given cpu. !0 in case the frequency is changeable.
+ * Return: level on success, THERMAL_CSTATE_INVALID on error.
*/
-static int is_cpufreq_valid(int cpu)
+static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_dev,
+ unsigned int freq)
{
- struct cpufreq_policy policy;
-
- return !cpufreq_get_policy(&policy, cpu);
-}
-
-enum cpufreq_cooling_property {
- GET_LEVEL,
- GET_FREQ,
- GET_MAXL,
-};
-
-/**
- * get_property - fetch a property of interest for a give cpu.
- * @cpu: cpu for which the property is required
- * @input: query parameter
- * @output: query return
- * @property: type of query (frequency, level, max level)
- *
- * This is the common function to
- * 1. get maximum cpu cooling states
- * 2. translate frequency to cooling state
- * 3. translate cooling state to frequency
- * Note that the code may be not in good shape
- * but it is written in this way in order to:
- * a) reduce duplicate code as most of the code can be shared.
- * b) make sure the logic is consistent when translating between
- * cooling states and frequencies.
- *
- * Return: 0 on success, -EINVAL when invalid parameters are passed.
- */
-static int get_property(unsigned int cpu, unsigned long input,
- unsigned int *output,
- enum cpufreq_cooling_property property)
-{
- int i;
- unsigned long max_level = 0, level = 0;
- unsigned int freq = CPUFREQ_ENTRY_INVALID;
- int descend = -1;
- struct cpufreq_frequency_table *pos, *table =
- cpufreq_frequency_get_table(cpu);
-
- if (!output)
- return -EINVAL;
-
- if (!table)
- return -EINVAL;
-
- cpufreq_for_each_valid_entry(pos, table) {
- /* ignore duplicate entry */
- if (freq == pos->frequency)
- continue;
-
- /* get the frequency order */
- if (freq != CPUFREQ_ENTRY_INVALID && descend == -1)
- descend = freq > pos->frequency;
-
- freq = pos->frequency;
- max_level++;
- }
-
- /* No valid cpu frequency entry */
- if (max_level == 0)
- return -EINVAL;
+ unsigned long level;
- /* max_level is an index, not a counter */
- max_level--;
+ for (level = 0; level <= cpufreq_dev->max_level; level++) {
+ if (freq == cpufreq_dev->freq_table[level])
+ return level;
- /* get max level */
- if (property == GET_MAXL) {
- *output = (unsigned int)max_level;
- return 0;
+ if (freq > cpufreq_dev->freq_table[level])
+ break;
}
- if (property == GET_FREQ)
- level = descend ? input : (max_level - input);
-
- i = 0;
- cpufreq_for_each_valid_entry(pos, table) {
- /* ignore duplicate entry */
- if (freq == pos->frequency)
- continue;
-
- /* now we have a valid frequency entry */
- freq = pos->frequency;
-
- if (property == GET_LEVEL && (unsigned int)input == freq) {
- /* get level by frequency */
- *output = descend ? i : (max_level - i);
- return 0;
- }
- if (property == GET_FREQ && level == i) {
- /* get frequency by level */
- *output = freq;
- return 0;
- }
- i++;
- }
-
- return -EINVAL;
+ return THERMAL_CSTATE_INVALID;
}
/**
- * cpufreq_cooling_get_level - for a give cpu, return the cooling level.
+ * cpufreq_cooling_get_level - for a given cpu, return the cooling level.
* @cpu: cpu for which the level is required
* @freq: the frequency of interest
*
*/
unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq)
{
- unsigned int val;
-
- if (get_property(cpu, (unsigned long)freq, &val, GET_LEVEL))
- return THERMAL_CSTATE_INVALID;
-
- return (unsigned long)val;
-}
-EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
-
-/**
- * get_cpu_frequency - get the absolute value of frequency from level.
- * @cpu: cpu for which frequency is fetched.
- * @level: cooling level
- *
- * This function matches cooling level with frequency. Based on a cooling level
- * of frequency, equals cooling state of cpu cooling device, it will return
- * the corresponding frequency.
- * e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc
- *
- * Return: 0 on error, the corresponding frequency otherwise.
- */
-static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level)
-{
- int ret = 0;
- unsigned int freq;
-
- ret = get_property(cpu, level, &freq, GET_FREQ);
- if (ret)
- return 0;
-
- return freq;
-}
-
-/**
- * cpufreq_apply_cooling - function to apply frequency clipping.
- * @cpufreq_device: cpufreq_cooling_device pointer containing frequency
- * clipping data.
- * @cooling_state: value of the cooling state.
- *
- * Function used to make sure the cpufreq layer is aware of current thermal
- * limits. The limits are applied by updating the cpufreq policy.
- *
- * Return: 0 on success, an error code otherwise (-EINVAL in case wrong
- * cooling state).
- */
-static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device,
- unsigned long cooling_state)
-{
- unsigned int cpuid, clip_freq;
- struct cpumask *mask = &cpufreq_device->allowed_cpus;
- unsigned int cpu = cpumask_any(mask);
-
-
- /* Check if the old cooling action is same as new cooling action */
- if (cpufreq_device->cpufreq_state == cooling_state)
- return 0;
-
- clip_freq = get_cpu_frequency(cpu, cooling_state);
- if (!clip_freq)
- return -EINVAL;
-
- cpufreq_device->cpufreq_state = cooling_state;
- cpufreq_device->cpufreq_val = clip_freq;
+ struct cpufreq_cooling_device *cpufreq_dev;
- for_each_cpu(cpuid, mask) {
- if (is_cpufreq_valid(cpuid))
- cpufreq_update_policy(cpuid);
+ mutex_lock(&cooling_cpufreq_lock);
+ list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
+ if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) {
+ mutex_unlock(&cooling_cpufreq_lock);
+ return get_level(cpufreq_dev, freq);
+ }
}
+ mutex_unlock(&cooling_cpufreq_lock);
- return 0;
+ pr_err("%s: cpu:%d not part of any cooling device\n", __func__, cpu);
+ return THERMAL_CSTATE_INVALID;
}
+EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
/**
* cpufreq_thermal_notifier - notifier callback for cpufreq policy change.
&cpufreq_dev->allowed_cpus))
continue;
- if (!cpufreq_dev->cpufreq_val)
- cpufreq_dev->cpufreq_val = get_cpu_frequency(
- cpumask_any(&cpufreq_dev->allowed_cpus),
- cpufreq_dev->cpufreq_state);
-
max_freq = cpufreq_dev->cpufreq_val;
if (policy->max != max_freq)
unsigned long *state)
{
struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
- struct cpumask *mask = &cpufreq_device->allowed_cpus;
- unsigned int cpu;
- unsigned int count = 0;
- int ret;
-
- cpu = cpumask_any(mask);
-
- ret = get_property(cpu, 0, &count, GET_MAXL);
- if (count > 0)
- *state = count;
-
- return ret;
+ *state = cpufreq_device->max_level;
+ return 0;
}
/**
unsigned long state)
{
struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+ unsigned int cpu = cpumask_any(&cpufreq_device->allowed_cpus);
+ unsigned int clip_freq;
+
+ /* Request state should be less than max_level */
+ if (WARN_ON(state > cpufreq_device->max_level))
+ return -EINVAL;
+
+ /* Check if the old cooling action is same as new cooling action */
+ if (cpufreq_device->cpufreq_state == state)
+ return 0;
- return cpufreq_apply_cooling(cpufreq_device, state);
+ clip_freq = cpufreq_device->freq_table[state];
+ cpufreq_device->cpufreq_state = state;
+ cpufreq_device->cpufreq_val = clip_freq;
+
+ cpufreq_update_policy(cpu);
+
+ return 0;
}
/* Bind cpufreq callbacks to thermal cooling device ops */
.notifier_call = cpufreq_thermal_notifier,
};
+static unsigned int find_next_max(struct cpufreq_frequency_table *table,
+ unsigned int prev_max)
+{
+ struct cpufreq_frequency_table *pos;
+ unsigned int max = 0;
+
+ cpufreq_for_each_valid_entry(pos, table) {
+ if (pos->frequency > max && pos->frequency < prev_max)
+ max = pos->frequency;
+ }
+
+ return max;
+}
+
/**
* __cpufreq_cooling_register - helper function to create cpufreq cooling device
* @np: a valid struct device_node to the cooling device device tree node
* @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ * Normally this should be same as cpufreq policy->related_cpus.
*
* This interface function registers the cpufreq cooling device with the name
* "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
const struct cpumask *clip_cpus)
{
struct thermal_cooling_device *cool_dev;
- struct cpufreq_cooling_device *cpufreq_dev = NULL;
- unsigned int min = 0, max = 0;
+ struct cpufreq_cooling_device *cpufreq_dev;
char dev_name[THERMAL_NAME_LENGTH];
- int ret = 0, i;
- struct cpufreq_policy policy;
+ struct cpufreq_frequency_table *pos, *table;
+ unsigned int freq, i;
+ int ret;
- /* Verify that all the clip cpus have same freq_min, freq_max limit */
- for_each_cpu(i, clip_cpus) {
- /* continue if cpufreq policy not found and not return error */
- if (!cpufreq_get_policy(&policy, i))
- continue;
- if (min == 0 && max == 0) {
- min = policy.cpuinfo.min_freq;
- max = policy.cpuinfo.max_freq;
- } else {
- if (min != policy.cpuinfo.min_freq ||
- max != policy.cpuinfo.max_freq)
- return ERR_PTR(-EINVAL);
- }
+ table = cpufreq_frequency_get_table(cpumask_first(clip_cpus));
+ if (!table) {
+ pr_debug("%s: CPUFreq table not found\n", __func__);
+ return ERR_PTR(-EPROBE_DEFER);
}
- cpufreq_dev = kzalloc(sizeof(struct cpufreq_cooling_device),
- GFP_KERNEL);
+
+ cpufreq_dev = kzalloc(sizeof(*cpufreq_dev), GFP_KERNEL);
if (!cpufreq_dev)
return ERR_PTR(-ENOMEM);
+ /* Find max levels */
+ cpufreq_for_each_valid_entry(pos, table)
+ cpufreq_dev->max_level++;
+
+ cpufreq_dev->freq_table = kmalloc(sizeof(*cpufreq_dev->freq_table) *
+ cpufreq_dev->max_level, GFP_KERNEL);
+ if (!cpufreq_dev->freq_table) {
+ cool_dev = ERR_PTR(-ENOMEM);
+ goto free_cdev;
+ }
+
+ /* max_level is an index, not a counter */
+ cpufreq_dev->max_level--;
+
cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus);
ret = get_idr(&cpufreq_idr, &cpufreq_dev->id);
if (ret) {
- kfree(cpufreq_dev);
- return ERR_PTR(-EINVAL);
+ cool_dev = ERR_PTR(ret);
+ goto free_table;
}
snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev,
&cpufreq_cooling_ops);
- if (IS_ERR(cool_dev)) {
- release_idr(&cpufreq_idr, cpufreq_dev->id);
- kfree(cpufreq_dev);
- return cool_dev;
+ if (IS_ERR(cool_dev))
+ goto remove_idr;
+
+ /* Fill freq-table in descending order of frequencies */
+ for (i = 0, freq = -1; i <= cpufreq_dev->max_level; i++) {
+ freq = find_next_max(table, freq);
+ cpufreq_dev->freq_table[i] = freq;
+
+ /* Warn for duplicate entries */
+ if (!freq)
+ pr_warn("%s: table has duplicate entries\n", __func__);
+ else
+ pr_debug("%s: freq:%u KHz\n", __func__, freq);
}
+
+ cpufreq_dev->cpufreq_val = cpufreq_dev->freq_table[0];
cpufreq_dev->cool_dev = cool_dev;
- cpufreq_dev->cpufreq_state = 0;
+
mutex_lock(&cooling_cpufreq_lock);
/* Register the notifier for first cpufreq cooling device */
- if (cpufreq_dev_count == 0)
+ if (list_empty(&cpufreq_dev_list))
cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
- cpufreq_dev_count++;
list_add(&cpufreq_dev->node, &cpufreq_dev_list);
mutex_unlock(&cooling_cpufreq_lock);
+ return cool_dev;
+
+remove_idr:
+ release_idr(&cpufreq_idr, cpufreq_dev->id);
+free_table:
+ kfree(cpufreq_dev->freq_table);
+free_cdev:
+ kfree(cpufreq_dev);
+
return cool_dev;
}
cpufreq_dev = cdev->devdata;
mutex_lock(&cooling_cpufreq_lock);
list_del(&cpufreq_dev->node);
- cpufreq_dev_count--;
/* Unregister the notifier for the last cpufreq cooling device */
- if (cpufreq_dev_count == 0)
+ if (list_empty(&cpufreq_dev_list))
cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
mutex_unlock(&cooling_cpufreq_lock);
thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
release_idr(&cpufreq_idr, cpufreq_dev->id);
+ kfree(cpufreq_dev->freq_table);
kfree(cpufreq_dev);
}
EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister);
*/
#include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
{
struct thermal_cooling_device *cdev;
- struct cpumask mask_val;
-
- /* make sure cpufreq driver has been initialized */
- if (!cpufreq_frequency_get_table(0))
- return -EPROBE_DEFER;
-
- cpumask_set_cpu(0, &mask_val);
- cdev = cpufreq_cooling_register(&mask_val);
+ cdev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(cdev)) {
- dev_err(&pdev->dev, "Failed to register cooling device\n");
- return PTR_ERR(cdev);
+ int ret = PTR_ERR(cdev);
+
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Failed to register cooling device %d\n",
+ ret);
+
+ return ret;
}
platform_set_drvdata(pdev, cdev);
#include <linux/clk.h>
#include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
const struct of_device_id *of_id =
of_match_device(of_imx_thermal_match, &pdev->dev);
struct imx_thermal_data *data;
- struct cpumask clip_cpus;
struct regmap *map;
int measure_freq;
int ret;
- if (!cpufreq_get_current_driver()) {
- dev_dbg(&pdev->dev, "no cpufreq driver!");
- return -EPROBE_DEFER;
- }
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
- cpumask_set_cpu(0, &clip_cpus);
- data->cdev = cpufreq_cooling_register(&clip_cpus);
+ data->cdev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(data->cdev)) {
ret = PTR_ERR(data->cdev);
- dev_err(&pdev->dev,
- "failed to register cpufreq cooling device: %d\n", ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to register cpufreq cooling device: %d\n",
+ ret);
return ret;
}
obj-$(CONFIG_INT340X_THERMAL) += int3400_thermal.o
obj-$(CONFIG_INT340X_THERMAL) += int3402_thermal.o
obj-$(CONFIG_INT340X_THERMAL) += int3403_thermal.o
+obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_device.o
obj-$(CONFIG_ACPI_THERMAL_REL) += acpi_thermal_rel.o
struct acpi_buffer trt_format = { sizeof("RRNNNNNN"), "RRNNNNNN" };
if (!acpi_has_method(handle, "_TRT"))
- return 0;
+ return -ENODEV;
status = acpi_evaluate_object(handle, "_TRT", NULL, &buffer);
if (ACPI_FAILURE(status))
sizeof("RRNNNNNNNNNNN"), "RRNNNNNNNNNNN" };
if (!acpi_has_method(handle, "_ART"))
- return 0;
+ return -ENODEV;
status = acpi_evaluate_object(handle, "_ART", NULL, &buffer);
if (ACPI_FAILURE(status))
unsigned long length = 0;
int count = 0;
char __user *arg = (void __user *)__arg;
- struct trt *trts;
- struct art *arts;
+ struct trt *trts = NULL;
+ struct art *arts = NULL;
switch (cmd) {
case ACPI_THERMAL_GET_TRT_COUNT:
.remove = int3400_thermal_remove,
.driver = {
.name = "int3400 thermal",
- .owner = THIS_MODULE,
.acpi_match_table = ACPI_PTR(int3400_thermal_match),
},
};
.remove = int3402_thermal_remove,
.driver = {
.name = "int3402 thermal",
- .owner = THIS_MODULE,
.acpi_match_table = int3402_thermal_match,
},
};
{
struct int3403_sensor *obj = priv->priv;
+ acpi_remove_notify_handler(priv->adev->handle,
+ ACPI_DEVICE_NOTIFY, int3403_notify);
thermal_zone_device_unregister(obj->tzone);
return 0;
}
p = buf.pointer;
if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
printk(KERN_WARNING "Invalid PPSS data\n");
+ kfree(buf.pointer);
return -EFAULT;
}
priv->priv = obj;
+ kfree(buf.pointer);
/* TODO: add ACPI notification support */
return result;
--- /dev/null
+/*
+ * processor_thermal_device.c
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+
+/* Broadwell-U/HSB thermal reporting device */
+#define PCI_DEVICE_ID_PROC_BDW_THERMAL 0x1603
+#define PCI_DEVICE_ID_PROC_HSB_THERMAL 0x0A03
+
+/* Braswell thermal reporting device */
+#define PCI_DEVICE_ID_PROC_BSW_THERMAL 0x22DC
+
+struct power_config {
+ u32 index;
+ u32 min_uw;
+ u32 max_uw;
+ u32 tmin_us;
+ u32 tmax_us;
+ u32 step_uw;
+};
+
+struct proc_thermal_device {
+ struct device *dev;
+ struct acpi_device *adev;
+ struct power_config power_limits[2];
+};
+
+enum proc_thermal_emum_mode_type {
+ PROC_THERMAL_NONE,
+ PROC_THERMAL_PCI,
+ PROC_THERMAL_PLATFORM_DEV
+};
+
+/*
+ * We can have only one type of enumeration, PCI or Platform,
+ * not both. So we don't need instance specific data.
+ */
+static enum proc_thermal_emum_mode_type proc_thermal_emum_mode =
+ PROC_THERMAL_NONE;
+
+#define POWER_LIMIT_SHOW(index, suffix) \
+static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct pci_dev *pci_dev; \
+ struct platform_device *pdev; \
+ struct proc_thermal_device *proc_dev; \
+\
+ if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) { \
+ pdev = to_platform_device(dev); \
+ proc_dev = platform_get_drvdata(pdev); \
+ } else { \
+ pci_dev = to_pci_dev(dev); \
+ proc_dev = pci_get_drvdata(pci_dev); \
+ } \
+ return sprintf(buf, "%lu\n",\
+ (unsigned long)proc_dev->power_limits[index].suffix * 1000); \
+}
+
+POWER_LIMIT_SHOW(0, min_uw)
+POWER_LIMIT_SHOW(0, max_uw)
+POWER_LIMIT_SHOW(0, step_uw)
+POWER_LIMIT_SHOW(0, tmin_us)
+POWER_LIMIT_SHOW(0, tmax_us)
+
+POWER_LIMIT_SHOW(1, min_uw)
+POWER_LIMIT_SHOW(1, max_uw)
+POWER_LIMIT_SHOW(1, step_uw)
+POWER_LIMIT_SHOW(1, tmin_us)
+POWER_LIMIT_SHOW(1, tmax_us)
+
+static DEVICE_ATTR_RO(power_limit_0_min_uw);
+static DEVICE_ATTR_RO(power_limit_0_max_uw);
+static DEVICE_ATTR_RO(power_limit_0_step_uw);
+static DEVICE_ATTR_RO(power_limit_0_tmin_us);
+static DEVICE_ATTR_RO(power_limit_0_tmax_us);
+
+static DEVICE_ATTR_RO(power_limit_1_min_uw);
+static DEVICE_ATTR_RO(power_limit_1_max_uw);
+static DEVICE_ATTR_RO(power_limit_1_step_uw);
+static DEVICE_ATTR_RO(power_limit_1_tmin_us);
+static DEVICE_ATTR_RO(power_limit_1_tmax_us);
+
+static struct attribute *power_limit_attrs[] = {
+ &dev_attr_power_limit_0_min_uw.attr,
+ &dev_attr_power_limit_1_min_uw.attr,
+ &dev_attr_power_limit_0_max_uw.attr,
+ &dev_attr_power_limit_1_max_uw.attr,
+ &dev_attr_power_limit_0_step_uw.attr,
+ &dev_attr_power_limit_1_step_uw.attr,
+ &dev_attr_power_limit_0_tmin_us.attr,
+ &dev_attr_power_limit_1_tmin_us.attr,
+ &dev_attr_power_limit_0_tmax_us.attr,
+ &dev_attr_power_limit_1_tmax_us.attr,
+ NULL
+};
+
+static struct attribute_group power_limit_attribute_group = {
+ .attrs = power_limit_attrs,
+ .name = "power_limits"
+};
+
+static int proc_thermal_add(struct device *dev,
+ struct proc_thermal_device **priv)
+{
+ struct proc_thermal_device *proc_priv;
+ struct acpi_device *adev;
+ acpi_status status;
+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *elements, *ppcc;
+ union acpi_object *p;
+ int i;
+ int ret;
+
+ adev = ACPI_COMPANION(dev);
+
+ status = acpi_evaluate_object(adev->handle, "PPCC", NULL, &buf);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ p = buf.pointer;
+ if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
+ dev_err(dev, "Invalid PPCC data\n");
+ ret = -EFAULT;
+ goto free_buffer;
+ }
+ if (!p->package.count) {
+ dev_err(dev, "Invalid PPCC package size\n");
+ ret = -EFAULT;
+ goto free_buffer;
+ }
+
+ proc_priv = devm_kzalloc(dev, sizeof(*proc_priv), GFP_KERNEL);
+ if (!proc_priv) {
+ ret = -ENOMEM;
+ goto free_buffer;
+ }
+
+ proc_priv->dev = dev;
+ proc_priv->adev = adev;
+
+ for (i = 0; i < min((int)p->package.count - 1, 2); ++i) {
+ elements = &(p->package.elements[i+1]);
+ if (elements->type != ACPI_TYPE_PACKAGE ||
+ elements->package.count != 6) {
+ ret = -EFAULT;
+ goto free_buffer;
+ }
+ ppcc = elements->package.elements;
+ proc_priv->power_limits[i].index = ppcc[0].integer.value;
+ proc_priv->power_limits[i].min_uw = ppcc[1].integer.value;
+ proc_priv->power_limits[i].max_uw = ppcc[2].integer.value;
+ proc_priv->power_limits[i].tmin_us = ppcc[3].integer.value;
+ proc_priv->power_limits[i].tmax_us = ppcc[4].integer.value;
+ proc_priv->power_limits[i].step_uw = ppcc[5].integer.value;
+ }
+
+ *priv = proc_priv;
+
+ ret = sysfs_create_group(&dev->kobj,
+ &power_limit_attribute_group);
+
+free_buffer:
+ kfree(buf.pointer);
+
+ return ret;
+}
+
+void proc_thermal_remove(struct proc_thermal_device *proc_priv)
+{
+ sysfs_remove_group(&proc_priv->dev->kobj,
+ &power_limit_attribute_group);
+}
+
+static int int3401_add(struct platform_device *pdev)
+{
+ struct proc_thermal_device *proc_priv;
+ int ret;
+
+ if (proc_thermal_emum_mode == PROC_THERMAL_PCI) {
+ dev_err(&pdev->dev, "error: enumerated as PCI dev\n");
+ return -ENODEV;
+ }
+
+ ret = proc_thermal_add(&pdev->dev, &proc_priv);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, proc_priv);
+ proc_thermal_emum_mode = PROC_THERMAL_PLATFORM_DEV;
+
+ return 0;
+}
+
+static int int3401_remove(struct platform_device *pdev)
+{
+ proc_thermal_remove(platform_get_drvdata(pdev));
+
+ return 0;
+}
+
+static int proc_thermal_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *unused)
+{
+ struct proc_thermal_device *proc_priv;
+ int ret;
+
+ if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) {
+ dev_err(&pdev->dev, "error: enumerated as platform dev\n");
+ return -ENODEV;
+ }
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "error: could not enable device\n");
+ return ret;
+ }
+
+ ret = proc_thermal_add(&pdev->dev, &proc_priv);
+ if (ret) {
+ pci_disable_device(pdev);
+ return ret;
+ }
+
+ pci_set_drvdata(pdev, proc_priv);
+ proc_thermal_emum_mode = PROC_THERMAL_PCI;
+
+ return 0;
+}
+
+static void proc_thermal_pci_remove(struct pci_dev *pdev)
+{
+ proc_thermal_remove(pci_get_drvdata(pdev));
+ pci_disable_device(pdev);
+}
+
+static const struct pci_device_id proc_thermal_pci_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BDW_THERMAL)},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_HSB_THERMAL)},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BSW_THERMAL)},
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids);
+
+static struct pci_driver proc_thermal_pci_driver = {
+ .name = "proc_thermal",
+ .probe = proc_thermal_pci_probe,
+ .remove = proc_thermal_pci_remove,
+ .id_table = proc_thermal_pci_ids,
+};
+
+static const struct acpi_device_id int3401_device_ids[] = {
+ {"INT3401", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3401_device_ids);
+
+static struct platform_driver int3401_driver = {
+ .probe = int3401_add,
+ .remove = int3401_remove,
+ .driver = {
+ .name = "int3401 thermal",
+ .acpi_match_table = int3401_device_ids,
+ },
+};
+
+static int __init proc_thermal_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&int3401_driver);
+ if (ret)
+ return ret;
+
+ ret = pci_register_driver(&proc_thermal_pci_driver);
+
+ return ret;
+}
+
+static void __exit proc_thermal_exit(void)
+{
+ platform_driver_unregister(&int3401_driver);
+ pci_unregister_driver(&proc_thermal_pci_driver);
+}
+
+module_init(proc_thermal_init);
+module_exit(proc_thermal_exit);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");
{ X86_VENDOR_INTEL, 6, 0x45},
{ X86_VENDOR_INTEL, 6, 0x46},
{ X86_VENDOR_INTEL, 6, 0x4c},
+ { X86_VENDOR_INTEL, 6, 0x56},
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
static struct platform_driver rockchip_thermal_driver = {
.driver = {
.name = "rockchip-thermal",
- .owner = THIS_MODULE,
.pm = &rockchip_thermal_pm_ops,
.of_match_table = of_rockchip_thermal_match,
},
config EXYNOS_THERMAL
tristate "Exynos thermal management unit driver"
- depends on ARCH_HAS_BANDGAP && OF
+ depends on OF
help
If you say yes here you get support for the TMU (Thermal Management
Unit) driver for SAMSUNG EXYNOS series of SoCs. This driver initialises
int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
{
int ret;
- struct cpumask mask_val;
struct exynos_thermal_zone *th_zone;
if (!sensor_conf || !sensor_conf->read_temperature) {
* sensor
*/
if (sensor_conf->cooling_data.freq_clip_count > 0) {
- cpumask_set_cpu(0, &mask_val);
th_zone->cool_dev[th_zone->cool_dev_size] =
- cpufreq_cooling_register(&mask_val);
+ cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(th_zone->cool_dev[th_zone->cool_dev_size])) {
- dev_err(sensor_conf->dev,
- "Failed to register cpufreq cooling device\n");
- ret = -EINVAL;
+ ret = PTR_ERR(th_zone->cool_dev[th_zone->cool_dev_size]);
+ if (ret != -EPROBE_DEFER)
+ dev_err(sensor_conf->dev,
+ "Failed to register cpufreq cooling device: %d\n",
+ ret);
goto err_unregister;
}
th_zone->cool_dev_size++;
/* Register the sensor with thermal management interface */
ret = exynos_register_thermal(sensor_conf);
if (ret) {
- dev_err(&pdev->dev, "Failed to register thermal interface\n");
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Failed to register thermal interface: %d\n",
+ ret);
goto err_clk;
}
data->reg_conf = sensor_conf;
struct thermal_zone_device *pos1;
struct thermal_cooling_device *pos2;
unsigned long max_state;
- int result;
+ int result, ret;
if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
return -EINVAL;
if (tz != pos1 || cdev != pos2)
return -EINVAL;
- cdev->ops->get_max_state(cdev, &max_state);
+ ret = cdev->ops->get_max_state(cdev, &max_state);
+ if (ret)
+ return ret;
/* lower default 0, upper default max_state */
lower = lower == THERMAL_NO_LIMIT ? 0 : lower;
#include <linux/kernel.h>
#include <linux/workqueue.h>
#include <linux/thermal.h>
-#include <linux/cpufreq.h>
#include <linux/cpumask.h>
#include <linux/cpu_cooling.h>
#include <linux/of.h>
if (!data)
return -EINVAL;
- if (!cpufreq_get_current_driver()) {
- dev_dbg(bgp->dev, "no cpufreq driver yet\n");
- return -EPROBE_DEFER;
- }
-
/* Register cooling device */
data->cool_dev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(data->cool_dev)) {
- dev_err(bgp->dev,
- "Failed to register cpufreq cooling device\n");
- return PTR_ERR(data->cool_dev);
+ int ret = PTR_ERR(data->cool_dev);
+
+ if (ret != -EPROBE_DEFER)
+ dev_err(bgp->dev,
+ "Failed to register cpu cooling device %d\n",
+ ret);
+
+ return ret;
}
ti_bandgap_set_sensor_data(bgp, id, data);
static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
- u8 type;
struct vfio_pci_device *vdev;
struct iommu_group *group;
int ret;
- pci_read_config_byte(pdev, PCI_HEADER_TYPE, &type);
- if ((type & PCI_HEADER_TYPE) != PCI_HEADER_TYPE_NORMAL)
+ if (pdev->hdr_type != PCI_HEADER_TYPE_NORMAL)
return -EINVAL;
group = iommu_group_get(&pdev->dev);
++headcount;
seg += in;
}
- heads[headcount - 1].len = cpu_to_vhost32(vq, len - datalen);
+ heads[headcount - 1].len = cpu_to_vhost32(vq, len + datalen);
*iovcount = seg;
if (unlikely(log))
*log_num = nlogs;
r = -EFAULT;
break;
}
- if ((a.avail_user_addr & (sizeof *vq->avail->ring - 1)) ||
- (a.used_user_addr & (sizeof *vq->used->ring - 1)) ||
- (a.log_guest_addr & (sizeof *vq->used->ring - 1))) {
+
+ /* Make sure it's safe to cast pointers to vring types. */
+ BUILD_BUG_ON(__alignof__ *vq->avail > VRING_AVAIL_ALIGN_SIZE);
+ BUILD_BUG_ON(__alignof__ *vq->used > VRING_USED_ALIGN_SIZE);
+ if ((a.avail_user_addr & (VRING_AVAIL_ALIGN_SIZE - 1)) ||
+ (a.used_user_addr & (VRING_USED_ALIGN_SIZE - 1)) ||
+ (a.log_guest_addr & (sizeof(u64) - 1))) {
r = -EINVAL;
break;
}
cancel_delayed_work_sync(&info->deferred_work);
/* Run it immediately */
- err = schedule_delayed_work(&info->deferred_work, 0);
+ schedule_delayed_work(&info->deferred_work, 0);
mutex_unlock(&inode->i_mutex);
- return err;
+
+ return 0;
}
EXPORT_SYMBOL_GPL(fb_deferred_io_fsync);
.mX_max = 127,
.fint_min = 500000,
.fint_max = 2500000,
- .clkdco_max = 1800000000,
.clkdco_min = 500000000,
.clkdco_low = 1000000000,
.mX_max = 127,
.fint_min = 620000,
.fint_max = 2500000,
- .clkdco_max = 1800000000,
.clkdco_min = 750000000,
.clkdco_low = 1500000000,
return 0;
err_enable:
- regulator_disable(pll->regulator);
+ if (pll->regulator)
+ regulator_disable(pll->regulator);
err_reg:
clk_disable_unprepare(pll->clkin);
return r;
out->output_type = OMAP_DISPLAY_TYPE_SDI;
out->name = "sdi.0";
out->dispc_channel = OMAP_DSS_CHANNEL_LCD;
+ /* We have SDI only on OMAP3, where it's on port 1 */
+ out->port_num = 1;
out->ops.sdi = &sdi_ops;
out->owner = THIS_MODULE;
module_param(nologo, bool, 0);
MODULE_PARM_DESC(nologo, "Disables startup logo");
+/*
+ * Logos are located in the initdata, and will be freed in kernel_init.
+ * Use late_init to mark the logos as freed to prevent any further use.
+ */
+
+static bool logos_freed;
+
+static int __init fb_logo_late_init(void)
+{
+ logos_freed = true;
+ return 0;
+}
+
+late_initcall(fb_logo_late_init);
+
/* logo's are marked __initdata. Use __init_refok to tell
* modpost that it is intended that this function uses data
* marked __initdata.
{
const struct linux_logo *logo = NULL;
- if (nologo)
+ if (nologo || logos_freed)
return NULL;
if (depth >= 1) {
vp_free_vectors(vdev);
kfree(vp_dev->vqs);
+ vp_dev->vqs = NULL;
}
static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
return 0;
}
-void virtio_pci_release_dev(struct device *_d)
-{
- /*
- * No need for a release method as we allocate/free
- * all devices together with the pci devices.
- * Provide an empty one to avoid getting a warning from core.
- */
-}
-
#ifdef CONFIG_PM_SLEEP
static int virtio_pci_freeze(struct device *dev)
{
* - ignore the affinity request if we're using INTX
*/
int vp_set_vq_affinity(struct virtqueue *vq, int cpu);
-void virtio_pci_release_dev(struct device *);
int virtio_pci_legacy_probe(struct pci_dev *pci_dev,
const struct pci_device_id *id);
.set_vq_affinity = vp_set_vq_affinity,
};
+static void virtio_pci_release_dev(struct device *_d)
+{
+ struct virtio_device *vdev = dev_to_virtio(_d);
+ struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+
+ /* As struct device is a kobject, it's not safe to
+ * free the memory (including the reference counter itself)
+ * until it's release callback. */
+ kfree(vp_dev);
+}
+
/* the PCI probing function */
int virtio_pci_legacy_probe(struct pci_dev *pci_dev,
const struct pci_device_id *id)
pci_iounmap(pci_dev, vp_dev->ioaddr);
pci_release_regions(pci_dev);
pci_disable_device(pci_dev);
- kfree(vp_dev);
}
{
int ret;
int type;
- struct btrfs_tree_block_info *info;
struct btrfs_extent_inline_ref *eiref;
if (*ptr == (unsigned long)-1)
}
/* we can treat both ref types equally here */
- info = (struct btrfs_tree_block_info *)(ei + 1);
*out_root = btrfs_extent_inline_ref_offset(eb, eiref);
- *out_level = btrfs_tree_block_level(eb, info);
+
+ if (key->type == BTRFS_EXTENT_ITEM_KEY) {
+ struct btrfs_tree_block_info *info;
+
+ info = (struct btrfs_tree_block_info *)(ei + 1);
+ *out_level = btrfs_tree_block_level(eb, info);
+ } else {
+ ASSERT(key->type == BTRFS_METADATA_ITEM_KEY);
+ *out_level = (u8)key->offset;
+ }
if (ret == 1)
*ptr = (unsigned long)-1;
{
struct btrfs_delayed_node *delayed_node;
+ /*
+ * we don't do delayed inode updates during log recovery because it
+ * leads to enospc problems. This means we also can't do
+ * delayed inode refs
+ */
+ if (BTRFS_I(inode)->root->fs_info->log_root_recovering)
+ return -EAGAIN;
+
delayed_node = btrfs_get_or_create_delayed_node(inode);
if (IS_ERR(delayed_node))
return PTR_ERR(delayed_node);
struct extent_buffer *leaf;
ret = btrfs_search_slot(trans, extent_root, &cache->key, path, 0, 1);
- if (ret < 0)
+ if (ret) {
+ if (ret > 0)
+ ret = -ENOENT;
goto fail;
- BUG_ON(ret); /* Corruption */
+ }
leaf = path->nodes[0];
bi = btrfs_item_ptr_offset(leaf, path->slots[0]);
btrfs_mark_buffer_dirty(leaf);
btrfs_release_path(path);
fail:
- if (ret) {
+ if (ret)
btrfs_abort_transaction(trans, root, ret);
- return ret;
- }
- return 0;
+ return ret;
}
out_fail:
btrfs_end_transaction(trans, root);
- if (drop_on_err)
+ if (drop_on_err) {
+ inode_dec_link_count(inode);
iput(inode);
+ }
btrfs_balance_delayed_items(root);
btrfs_btree_balance_dirty(root);
return err;
ret = scrub_pages_for_parity(sparity, logical, l, physical, dev,
flags, gen, mirror_num,
have_csum ? csum : NULL);
-skip:
if (ret)
return ret;
+skip:
len -= l;
logical += l;
physical += l;
}
}
- dout("fill_inline_data %p %llx.%llx len %lu locked_page %p\n",
+ dout("fill_inline_data %p %llx.%llx len %zu locked_page %p\n",
inode, ceph_vinop(inode), len, locked_page);
if (len > 0) {
server->ops->set_credits(server, val);
}
-static inline __u64
+static inline __le64
get_next_mid64(struct TCP_Server_Info *server)
{
- return server->ops->get_next_mid(server);
+ return cpu_to_le64(server->ops->get_next_mid(server));
}
static inline __le16
get_next_mid(struct TCP_Server_Info *server)
{
- __u16 mid = get_next_mid64(server);
+ __u16 mid = server->ops->get_next_mid(server);
/*
* The value in the SMB header should be little endian for easy
* on-the-wire decoding.
/* Subtract the NTFS time offset, then convert to 1s intervals. */
s64 t = le64_to_cpu(ntutc) - NTFS_TIME_OFFSET;
+ u64 abs_t;
/*
* Unfortunately can not use normal 64 bit division on 32 bit arch, but
* to special case them
*/
if (t < 0) {
- t = -t;
- ts.tv_nsec = (long)(do_div(t, 10000000) * 100);
+ abs_t = -t;
+ ts.tv_nsec = (long)(do_div(abs_t, 10000000) * 100);
ts.tv_nsec = -ts.tv_nsec;
- ts.tv_sec = -t;
+ ts.tv_sec = -abs_t;
} else {
- ts.tv_nsec = (long)do_div(t, 10000000) * 100;
- ts.tv_sec = t;
+ abs_t = t;
+ ts.tv_nsec = (long)do_div(abs_t, 10000000) * 100;
+ ts.tv_sec = abs_t;
}
return ts;
* Attempt to preload the dcache with the results from the FIND_FIRST/NEXT
*
* Find the dentry that matches "name". If there isn't one, create one. If it's
- * a negative dentry or the uniqueid changed, then drop it and recreate it.
+ * a negative dentry or the uniqueid or filetype(mode) changed,
+ * then drop it and recreate it.
*/
static void
cifs_prime_dcache(struct dentry *parent, struct qstr *name,
if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM))
fattr->cf_uniqueid = CIFS_I(inode)->uniqueid;
- /* update inode in place if i_ino didn't change */
- if (CIFS_I(inode)->uniqueid == fattr->cf_uniqueid) {
+ /* update inode in place
+ * if both i_ino and i_mode didn't change */
+ if (CIFS_I(inode)->uniqueid == fattr->cf_uniqueid &&
+ (inode->i_mode & S_IFMT) ==
+ (fattr->cf_mode & S_IFMT)) {
cifs_fattr_to_inode(inode, fattr);
goto out;
}
static int
check_smb2_hdr(struct smb2_hdr *hdr, __u64 mid)
{
+ __u64 wire_mid = le64_to_cpu(hdr->MessageId);
+
/*
* Make sure that this really is an SMB, that it is a response,
* and that the message ids match.
*/
if ((*(__le32 *)hdr->ProtocolId == SMB2_PROTO_NUMBER) &&
- (mid == hdr->MessageId)) {
+ (mid == wire_mid)) {
if (hdr->Flags & SMB2_FLAGS_SERVER_TO_REDIR)
return 0;
else {
if (*(__le32 *)hdr->ProtocolId != SMB2_PROTO_NUMBER)
cifs_dbg(VFS, "Bad protocol string signature header %x\n",
*(unsigned int *) hdr->ProtocolId);
- if (mid != hdr->MessageId)
+ if (mid != wire_mid)
cifs_dbg(VFS, "Mids do not match: %llu and %llu\n",
- mid, hdr->MessageId);
+ mid, wire_mid);
}
- cifs_dbg(VFS, "Bad SMB detected. The Mid=%llu\n", hdr->MessageId);
+ cifs_dbg(VFS, "Bad SMB detected. The Mid=%llu\n", wire_mid);
return 1;
}
{
struct smb2_hdr *hdr = (struct smb2_hdr *)buf;
struct smb2_pdu *pdu = (struct smb2_pdu *)hdr;
- __u64 mid = hdr->MessageId;
+ __u64 mid = le64_to_cpu(hdr->MessageId);
__u32 len = get_rfc1002_length(buf);
__u32 clc_len; /* calculated length */
int command;
{
struct mid_q_entry *mid;
struct smb2_hdr *hdr = (struct smb2_hdr *)buf;
+ __u64 wire_mid = le64_to_cpu(hdr->MessageId);
spin_lock(&GlobalMid_Lock);
list_for_each_entry(mid, &server->pending_mid_q, qhead) {
- if ((mid->mid == hdr->MessageId) &&
+ if ((mid->mid == wire_mid) &&
(mid->mid_state == MID_REQUEST_SUBMITTED) &&
(mid->command == hdr->Command)) {
spin_unlock(&GlobalMid_Lock);
__le16 CreditRequest; /* CreditResponse */
__le32 Flags;
__le32 NextCommand;
- __u64 MessageId; /* opaque - so can stay little endian */
+ __le64 MessageId;
__le32 ProcessId;
__u32 TreeId; /* opaque - so do not make little endian */
__u64 SessionId; /* opaque - so do not make little endian */
return temp;
else {
memset(temp, 0, sizeof(struct mid_q_entry));
- temp->mid = smb_buffer->MessageId; /* always LE */
+ temp->mid = le64_to_cpu(smb_buffer->MessageId);
temp->pid = current->pid;
temp->command = smb_buffer->Command; /* Always LE */
temp->when_alloc = jiffies;
/* fallback to generic here if not in extents fmt */
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
- return __generic_block_fiemap(inode, fieinfo, start, len,
- ext4_get_block);
+ return generic_block_fiemap(inode, fieinfo, start, len,
+ ext4_get_block);
if (fiemap_check_flags(fieinfo, EXT4_FIEMAP_FLAGS))
return -EBADR;
* we determine this extent as a data or a hole according to whether the
* page cache has data or not.
*/
-static int ext4_find_unwritten_pgoff(struct inode *inode, int whence,
- loff_t endoff, loff_t *offset)
+static int ext4_find_unwritten_pgoff(struct inode *inode,
+ int whence,
+ struct ext4_map_blocks *map,
+ loff_t *offset)
{
struct pagevec pvec;
+ unsigned int blkbits;
pgoff_t index;
pgoff_t end;
+ loff_t endoff;
loff_t startoff;
loff_t lastoff;
int found = 0;
+ blkbits = inode->i_sb->s_blocksize_bits;
startoff = *offset;
lastoff = startoff;
-
+ endoff = (loff_t)(map->m_lblk + map->m_len) << blkbits;
index = startoff >> PAGE_CACHE_SHIFT;
end = endoff >> PAGE_CACHE_SHIFT;
static loff_t ext4_seek_data(struct file *file, loff_t offset, loff_t maxsize)
{
struct inode *inode = file->f_mapping->host;
- struct fiemap_extent_info fie;
- struct fiemap_extent ext[2];
- loff_t next;
- int i, ret = 0;
+ struct ext4_map_blocks map;
+ struct extent_status es;
+ ext4_lblk_t start, last, end;
+ loff_t dataoff, isize;
+ int blkbits;
+ int ret = 0;
mutex_lock(&inode->i_mutex);
- if (offset >= inode->i_size) {
+
+ isize = i_size_read(inode);
+ if (offset >= isize) {
mutex_unlock(&inode->i_mutex);
return -ENXIO;
}
- fie.fi_flags = 0;
- fie.fi_extents_max = 2;
- fie.fi_extents_start = (struct fiemap_extent __user *) &ext;
- while (1) {
- mm_segment_t old_fs = get_fs();
-
- fie.fi_extents_mapped = 0;
- memset(ext, 0, sizeof(*ext) * fie.fi_extents_max);
-
- set_fs(get_ds());
- ret = ext4_fiemap(inode, &fie, offset, maxsize - offset);
- set_fs(old_fs);
- if (ret)
+
+ blkbits = inode->i_sb->s_blocksize_bits;
+ start = offset >> blkbits;
+ last = start;
+ end = isize >> blkbits;
+ dataoff = offset;
+
+ do {
+ map.m_lblk = last;
+ map.m_len = end - last + 1;
+ ret = ext4_map_blocks(NULL, inode, &map, 0);
+ if (ret > 0 && !(map.m_flags & EXT4_MAP_UNWRITTEN)) {
+ if (last != start)
+ dataoff = (loff_t)last << blkbits;
break;
+ }
- /* No extents found, EOF */
- if (!fie.fi_extents_mapped) {
- ret = -ENXIO;
+ /*
+ * If there is a delay extent at this offset,
+ * it will be as a data.
+ */
+ ext4_es_find_delayed_extent_range(inode, last, last, &es);
+ if (es.es_len != 0 && in_range(last, es.es_lblk, es.es_len)) {
+ if (last != start)
+ dataoff = (loff_t)last << blkbits;
break;
}
- for (i = 0; i < fie.fi_extents_mapped; i++) {
- next = (loff_t)(ext[i].fe_length + ext[i].fe_logical);
- if (offset < (loff_t)ext[i].fe_logical)
- offset = (loff_t)ext[i].fe_logical;
- /*
- * If extent is not unwritten, then it contains valid
- * data, mapped or delayed.
- */
- if (!(ext[i].fe_flags & FIEMAP_EXTENT_UNWRITTEN))
- goto out;
+ /*
+ * If there is a unwritten extent at this offset,
+ * it will be as a data or a hole according to page
+ * cache that has data or not.
+ */
+ if (map.m_flags & EXT4_MAP_UNWRITTEN) {
+ int unwritten;
+ unwritten = ext4_find_unwritten_pgoff(inode, SEEK_DATA,
+ &map, &dataoff);
+ if (unwritten)
+ break;
+ }
- /*
- * If there is a unwritten extent at this offset,
- * it will be as a data or a hole according to page
- * cache that has data or not.
- */
- if (ext4_find_unwritten_pgoff(inode, SEEK_DATA,
- next, &offset))
- goto out;
+ last++;
+ dataoff = (loff_t)last << blkbits;
+ } while (last <= end);
- if (ext[i].fe_flags & FIEMAP_EXTENT_LAST) {
- ret = -ENXIO;
- goto out;
- }
- offset = next;
- }
- }
- if (offset > inode->i_size)
- offset = inode->i_size;
-out:
mutex_unlock(&inode->i_mutex);
- if (ret)
- return ret;
- return vfs_setpos(file, offset, maxsize);
+ if (dataoff > isize)
+ return -ENXIO;
+
+ return vfs_setpos(file, dataoff, maxsize);
}
/*
- * ext4_seek_hole() retrieves the offset for SEEK_HOLE
+ * ext4_seek_hole() retrieves the offset for SEEK_HOLE.
*/
static loff_t ext4_seek_hole(struct file *file, loff_t offset, loff_t maxsize)
{
struct inode *inode = file->f_mapping->host;
- struct fiemap_extent_info fie;
- struct fiemap_extent ext[2];
- loff_t next;
- int i, ret = 0;
+ struct ext4_map_blocks map;
+ struct extent_status es;
+ ext4_lblk_t start, last, end;
+ loff_t holeoff, isize;
+ int blkbits;
+ int ret = 0;
mutex_lock(&inode->i_mutex);
- if (offset >= inode->i_size) {
+
+ isize = i_size_read(inode);
+ if (offset >= isize) {
mutex_unlock(&inode->i_mutex);
return -ENXIO;
}
- fie.fi_flags = 0;
- fie.fi_extents_max = 2;
- fie.fi_extents_start = (struct fiemap_extent __user *)&ext;
- while (1) {
- mm_segment_t old_fs = get_fs();
-
- fie.fi_extents_mapped = 0;
- memset(ext, 0, sizeof(*ext));
+ blkbits = inode->i_sb->s_blocksize_bits;
+ start = offset >> blkbits;
+ last = start;
+ end = isize >> blkbits;
+ holeoff = offset;
- set_fs(get_ds());
- ret = ext4_fiemap(inode, &fie, offset, maxsize - offset);
- set_fs(old_fs);
- if (ret)
- break;
+ do {
+ map.m_lblk = last;
+ map.m_len = end - last + 1;
+ ret = ext4_map_blocks(NULL, inode, &map, 0);
+ if (ret > 0 && !(map.m_flags & EXT4_MAP_UNWRITTEN)) {
+ last += ret;
+ holeoff = (loff_t)last << blkbits;
+ continue;
+ }
- /* No extents found */
- if (!fie.fi_extents_mapped)
- break;
+ /*
+ * If there is a delay extent at this offset,
+ * we will skip this extent.
+ */
+ ext4_es_find_delayed_extent_range(inode, last, last, &es);
+ if (es.es_len != 0 && in_range(last, es.es_lblk, es.es_len)) {
+ last = es.es_lblk + es.es_len;
+ holeoff = (loff_t)last << blkbits;
+ continue;
+ }
- for (i = 0; i < fie.fi_extents_mapped; i++) {
- next = (loff_t)(ext[i].fe_logical + ext[i].fe_length);
- /*
- * If extent is not unwritten, then it contains valid
- * data, mapped or delayed.
- */
- if (!(ext[i].fe_flags & FIEMAP_EXTENT_UNWRITTEN)) {
- if (offset < (loff_t)ext[i].fe_logical)
- goto out;
- offset = next;
+ /*
+ * If there is a unwritten extent at this offset,
+ * it will be as a data or a hole according to page
+ * cache that has data or not.
+ */
+ if (map.m_flags & EXT4_MAP_UNWRITTEN) {
+ int unwritten;
+ unwritten = ext4_find_unwritten_pgoff(inode, SEEK_HOLE,
+ &map, &holeoff);
+ if (!unwritten) {
+ last += ret;
+ holeoff = (loff_t)last << blkbits;
continue;
}
- /*
- * If there is a unwritten extent at this offset,
- * it will be as a data or a hole according to page
- * cache that has data or not.
- */
- if (ext4_find_unwritten_pgoff(inode, SEEK_HOLE,
- next, &offset))
- goto out;
-
- offset = next;
- if (ext[i].fe_flags & FIEMAP_EXTENT_LAST)
- goto out;
}
- }
- if (offset > inode->i_size)
- offset = inode->i_size;
-out:
+
+ /* find a hole */
+ break;
+ } while (last <= end);
+
mutex_unlock(&inode->i_mutex);
- if (ret)
- return ret;
- return vfs_setpos(file, offset, maxsize);
+ if (holeoff > isize)
+ holeoff = isize;
+
+ return vfs_setpos(file, holeoff, maxsize);
}
/*
if (!capable(CAP_SYS_RESOURCE))
return -EPERM;
+ /*
+ * If we are not using the primary superblock/GDT copy don't resize,
+ * because the user tools have no way of handling this. Probably a
+ * bad time to do it anyways.
+ */
+ if (EXT4_SB(sb)->s_sbh->b_blocknr !=
+ le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) {
+ ext4_warning(sb, "won't resize using backup superblock at %llu",
+ (unsigned long long)EXT4_SB(sb)->s_sbh->b_blocknr);
+ return -EPERM;
+ }
+
/*
* We are not allowed to do online-resizing on a filesystem mounted
* with error, because it can destroy the filesystem easily.
"EXT4-fs: ext4_add_new_gdb: adding group block %lu\n",
gdb_num);
- /*
- * If we are not using the primary superblock/GDT copy don't resize,
- * because the user tools have no way of handling this. Probably a
- * bad time to do it anyways.
- */
- if (EXT4_SB(sb)->s_sbh->b_blocknr !=
- le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) {
- ext4_warning(sb, "won't resize using backup superblock at %llu",
- (unsigned long long)EXT4_SB(sb)->s_sbh->b_blocknr);
- return -EPERM;
- }
-
gdb_bh = sb_bread(sb, gdblock);
if (!gdb_bh)
return -EIO;
if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) &&
EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_GDT_CSUM))
- ext4_warning(sb, KERN_INFO "metadata_csum and uninit_bg are "
+ ext4_warning(sb, "metadata_csum and uninit_bg are "
"redundant flags; please run fsck.");
/* Check for a known checksum algorithm */
* Exceptions: O_NONBLOCK is a two bit define on parisc; O_NDELAY
* is defined as O_NONBLOCK on some platforms and not on others.
*/
- BUILD_BUG_ON(20 - 1 /* for O_RDONLY being 0 */ != HWEIGHT32(
+ BUILD_BUG_ON(21 - 1 /* for O_RDONLY being 0 */ != HWEIGHT32(
O_RDONLY | O_WRONLY | O_RDWR |
O_CREAT | O_EXCL | O_NOCTTY |
O_TRUNC | O_APPEND | /* O_NONBLOCK | */
__O_SYNC | O_DSYNC | FASYNC |
O_DIRECT | O_LARGEFILE | O_DIRECTORY |
O_NOFOLLOW | O_NOATIME | O_CLOEXEC |
- __FMODE_EXEC | O_PATH | __O_TMPFILE
+ __FMODE_EXEC | O_PATH | __O_TMPFILE |
+ __FMODE_NONOTIFY
));
fasync_cache = kmem_cache_create("fasync_cache",
rs.cont_size = isonum_733(rr->u.CE.size);
break;
case SIG('E', 'R'):
+ /* Invalid length of ER tag id? */
+ if (rr->u.ER.len_id + offsetof(struct rock_ridge, u.ER.data) > rr->len)
+ goto out;
ISOFS_SB(inode->i_sb)->s_rock = 1;
printk(KERN_DEBUG "ISO 9660 Extensions: ");
{
status = nfs4_setlease(dp);
goto out;
}
- atomic_inc(&fp->fi_delegees);
if (fp->fi_had_conflict) {
status = -EAGAIN;
goto out_unlock;
}
+ atomic_inc(&fp->fi_delegees);
hash_delegation_locked(dp, fp);
status = 0;
out_unlock:
struct fsnotify_event *kevent;
char __user *start;
int ret;
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
start = buf;
group = file->private_data;
pr_debug("%s: group=%p\n", __func__, group);
+ add_wait_queue(&group->notification_waitq, &wait);
while (1) {
- prepare_to_wait(&group->notification_waitq, &wait, TASK_INTERRUPTIBLE);
-
mutex_lock(&group->notification_mutex);
kevent = get_one_event(group, count);
mutex_unlock(&group->notification_mutex);
if (start != buf)
break;
- schedule();
+
+ wait_woken(&wait, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
continue;
}
buf += ret;
count -= ret;
}
+ remove_wait_queue(&group->notification_waitq, &wait);
- finish_wait(&group->notification_waitq, &wait);
if (start != buf && ret != -EFAULT)
ret = buf - start;
return ret;
dlm_lockres_drop_inflight_ref(dlm, res);
spin_unlock(&res->spinlock);
- if (ret < 0) {
+ if (ret < 0)
mlog_errno(ret);
- if (newlock)
- dlm_lock_put(newlock);
- }
return ret;
}
struct inode *inode,
const char *symname);
+static int ocfs2_double_lock(struct ocfs2_super *osb,
+ struct buffer_head **bh1,
+ struct inode *inode1,
+ struct buffer_head **bh2,
+ struct inode *inode2,
+ int rename);
+
+static void ocfs2_double_unlock(struct inode *inode1, struct inode *inode2);
/* An orphan dir name is an 8 byte value, printed as a hex string */
#define OCFS2_ORPHAN_NAMELEN ((int)(2 * sizeof(u64)))
{
handle_t *handle;
struct inode *inode = old_dentry->d_inode;
+ struct inode *old_dir = old_dentry->d_parent->d_inode;
int err;
struct buffer_head *fe_bh = NULL;
+ struct buffer_head *old_dir_bh = NULL;
struct buffer_head *parent_fe_bh = NULL;
struct ocfs2_dinode *fe = NULL;
struct ocfs2_super *osb = OCFS2_SB(dir->i_sb);
dquot_initialize(dir);
- err = ocfs2_inode_lock_nested(dir, &parent_fe_bh, 1, OI_LS_PARENT);
+ err = ocfs2_double_lock(osb, &old_dir_bh, old_dir,
+ &parent_fe_bh, dir, 0);
if (err < 0) {
if (err != -ENOENT)
mlog_errno(err);
return err;
}
+ /* make sure both dirs have bhs
+ * get an extra ref on old_dir_bh if old==new */
+ if (!parent_fe_bh) {
+ if (old_dir_bh) {
+ parent_fe_bh = old_dir_bh;
+ get_bh(parent_fe_bh);
+ } else {
+ mlog(ML_ERROR, "%s: no old_dir_bh!\n", osb->uuid_str);
+ err = -EIO;
+ goto out;
+ }
+ }
+
if (!dir->i_nlink) {
err = -ENOENT;
goto out;
}
- err = ocfs2_lookup_ino_from_name(dir, old_dentry->d_name.name,
+ err = ocfs2_lookup_ino_from_name(old_dir, old_dentry->d_name.name,
old_dentry->d_name.len, &old_de_ino);
if (err) {
err = -ENOENT;
ocfs2_inode_unlock(inode, 1);
out:
- ocfs2_inode_unlock(dir, 1);
+ ocfs2_double_unlock(old_dir, dir);
brelse(fe_bh);
brelse(parent_fe_bh);
+ brelse(old_dir_bh);
ocfs2_free_dir_lookup_result(&lookup);
}
/*
- * The only place this should be used is rename!
+ * The only place this should be used is rename and link!
* if they have the same id, then the 1st one is the only one locked.
*/
static int ocfs2_double_lock(struct ocfs2_super *osb,
struct buffer_head **bh1,
struct inode *inode1,
struct buffer_head **bh2,
- struct inode *inode2)
+ struct inode *inode2,
+ int rename)
{
int status;
int inode1_is_ancestor, inode2_is_ancestor;
}
/* lock id2 */
status = ocfs2_inode_lock_nested(inode2, bh2, 1,
- OI_LS_RENAME1);
+ rename == 1 ? OI_LS_RENAME1 : OI_LS_PARENT);
if (status < 0) {
if (status != -ENOENT)
mlog_errno(status);
}
/* lock id1 */
- status = ocfs2_inode_lock_nested(inode1, bh1, 1, OI_LS_RENAME2);
+ status = ocfs2_inode_lock_nested(inode1, bh1, 1,
+ rename == 1 ? OI_LS_RENAME2 : OI_LS_PARENT);
if (status < 0) {
/*
* An error return must mean that no cluster locks
/* if old and new are the same, this'll just do one lock. */
status = ocfs2_double_lock(osb, &old_dir_bh, old_dir,
- &new_dir_bh, new_dir);
+ &new_dir_bh, new_dir, 1);
if (status < 0) {
mlog_errno(status);
goto bail;
sector_t offset;
int i, num, ret = 0;
struct extent_position epos = { NULL, 0, {0, 0} };
+ struct super_block *sb = dir->i_sb;
if (ctx->pos == 0) {
if (!dir_emit_dot(file, ctx))
if (nf_pos == 0)
nf_pos = udf_ext0_offset(dir);
- fibh.soffset = fibh.eoffset = nf_pos & (dir->i_sb->s_blocksize - 1);
+ fibh.soffset = fibh.eoffset = nf_pos & (sb->s_blocksize - 1);
if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB) {
- if (inode_bmap(dir, nf_pos >> dir->i_sb->s_blocksize_bits,
+ if (inode_bmap(dir, nf_pos >> sb->s_blocksize_bits,
&epos, &eloc, &elen, &offset)
!= (EXT_RECORDED_ALLOCATED >> 30)) {
ret = -ENOENT;
goto out;
}
- block = udf_get_lb_pblock(dir->i_sb, &eloc, offset);
- if ((++offset << dir->i_sb->s_blocksize_bits) < elen) {
+ block = udf_get_lb_pblock(sb, &eloc, offset);
+ if ((++offset << sb->s_blocksize_bits) < elen) {
if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
epos.offset -= sizeof(struct short_ad);
else if (iinfo->i_alloc_type ==
offset = 0;
}
- if (!(fibh.sbh = fibh.ebh = udf_tread(dir->i_sb, block))) {
+ if (!(fibh.sbh = fibh.ebh = udf_tread(sb, block))) {
ret = -EIO;
goto out;
}
- if (!(offset & ((16 >> (dir->i_sb->s_blocksize_bits - 9)) - 1))) {
- i = 16 >> (dir->i_sb->s_blocksize_bits - 9);
- if (i + offset > (elen >> dir->i_sb->s_blocksize_bits))
- i = (elen >> dir->i_sb->s_blocksize_bits) - offset;
+ if (!(offset & ((16 >> (sb->s_blocksize_bits - 9)) - 1))) {
+ i = 16 >> (sb->s_blocksize_bits - 9);
+ if (i + offset > (elen >> sb->s_blocksize_bits))
+ i = (elen >> sb->s_blocksize_bits) - offset;
for (num = 0; i > 0; i--) {
- block = udf_get_lb_pblock(dir->i_sb, &eloc, offset + i);
- tmp = udf_tgetblk(dir->i_sb, block);
+ block = udf_get_lb_pblock(sb, &eloc, offset + i);
+ tmp = udf_tgetblk(sb, block);
if (tmp && !buffer_uptodate(tmp) && !buffer_locked(tmp))
bha[num++] = tmp;
else
}
if ((cfi.fileCharacteristics & FID_FILE_CHAR_DELETED) != 0) {
- if (!UDF_QUERY_FLAG(dir->i_sb, UDF_FLAG_UNDELETE))
+ if (!UDF_QUERY_FLAG(sb, UDF_FLAG_UNDELETE))
continue;
}
if ((cfi.fileCharacteristics & FID_FILE_CHAR_HIDDEN) != 0) {
- if (!UDF_QUERY_FLAG(dir->i_sb, UDF_FLAG_UNHIDE))
+ if (!UDF_QUERY_FLAG(sb, UDF_FLAG_UNHIDE))
continue;
}
continue;
}
- flen = udf_get_filename(dir->i_sb, nameptr, fname, lfi);
+ flen = udf_get_filename(sb, nameptr, lfi, fname, UDF_NAME_LEN);
if (!flen)
continue;
tloc = lelb_to_cpu(cfi.icb.extLocation);
- iblock = udf_get_lb_pblock(dir->i_sb, &tloc, 0);
+ iblock = udf_get_lb_pblock(sb, &tloc, 0);
if (!dir_emit(ctx, fname, flen, iblock, DT_UNKNOWN))
goto out;
} /* end while */
}
inode->i_generation = iinfo->i_unique;
+ /* Sanity checks for files in ICB so that we don't get confused later */
+ if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) {
+ /*
+ * For file in ICB data is stored in allocation descriptor
+ * so sizes should match
+ */
+ if (iinfo->i_lenAlloc != inode->i_size)
+ goto out;
+ /* File in ICB has to fit in there... */
+ if (inode->i_size > inode->i_sb->s_blocksize -
+ udf_file_entry_alloc_offset(inode))
+ goto out;
+ }
+
switch (fe->icbTag.fileType) {
case ICBTAG_FILE_TYPE_DIRECTORY:
inode->i_op = &udf_dir_inode_operations;
struct udf_inode_info *dinfo = UDF_I(dir);
int isdotdot = child->len == 2 &&
child->name[0] == '.' && child->name[1] == '.';
+ struct super_block *sb = dir->i_sb;
size = udf_ext0_offset(dir) + dir->i_size;
f_pos = udf_ext0_offset(dir);
fibh->sbh = fibh->ebh = NULL;
- fibh->soffset = fibh->eoffset = f_pos & (dir->i_sb->s_blocksize - 1);
+ fibh->soffset = fibh->eoffset = f_pos & (sb->s_blocksize - 1);
if (dinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB) {
- if (inode_bmap(dir, f_pos >> dir->i_sb->s_blocksize_bits, &epos,
+ if (inode_bmap(dir, f_pos >> sb->s_blocksize_bits, &epos,
&eloc, &elen, &offset) != (EXT_RECORDED_ALLOCATED >> 30))
goto out_err;
- block = udf_get_lb_pblock(dir->i_sb, &eloc, offset);
- if ((++offset << dir->i_sb->s_blocksize_bits) < elen) {
+ block = udf_get_lb_pblock(sb, &eloc, offset);
+ if ((++offset << sb->s_blocksize_bits) < elen) {
if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
epos.offset -= sizeof(struct short_ad);
else if (dinfo->i_alloc_type == ICBTAG_FLAG_AD_LONG)
} else
offset = 0;
- fibh->sbh = fibh->ebh = udf_tread(dir->i_sb, block);
+ fibh->sbh = fibh->ebh = udf_tread(sb, block);
if (!fibh->sbh)
goto out_err;
}
}
if ((cfi->fileCharacteristics & FID_FILE_CHAR_DELETED) != 0) {
- if (!UDF_QUERY_FLAG(dir->i_sb, UDF_FLAG_UNDELETE))
+ if (!UDF_QUERY_FLAG(sb, UDF_FLAG_UNDELETE))
continue;
}
if ((cfi->fileCharacteristics & FID_FILE_CHAR_HIDDEN) != 0) {
- if (!UDF_QUERY_FLAG(dir->i_sb, UDF_FLAG_UNHIDE))
+ if (!UDF_QUERY_FLAG(sb, UDF_FLAG_UNHIDE))
continue;
}
if (!lfi)
continue;
- flen = udf_get_filename(dir->i_sb, nameptr, fname, lfi);
+ flen = udf_get_filename(sb, nameptr, lfi, fname, UDF_NAME_LEN);
if (flen && udf_match(flen, fname, child->len, child->name))
goto out_ok;
}
#include <linux/buffer_head.h>
#include "udf_i.h"
-static void udf_pc_to_char(struct super_block *sb, unsigned char *from,
- int fromlen, unsigned char *to)
+static int udf_pc_to_char(struct super_block *sb, unsigned char *from,
+ int fromlen, unsigned char *to, int tolen)
{
struct pathComponent *pc;
int elen = 0;
+ int comp_len;
unsigned char *p = to;
+ /* Reserve one byte for terminating \0 */
+ tolen--;
while (elen < fromlen) {
pc = (struct pathComponent *)(from + elen);
+ elen += sizeof(struct pathComponent);
switch (pc->componentType) {
case 1:
/*
* Symlink points to some place which should be agreed
* upon between originator and receiver of the media. Ignore.
*/
- if (pc->lengthComponentIdent > 0)
+ if (pc->lengthComponentIdent > 0) {
+ elen += pc->lengthComponentIdent;
break;
+ }
/* Fall through */
case 2:
+ if (tolen == 0)
+ return -ENAMETOOLONG;
p = to;
*p++ = '/';
+ tolen--;
break;
case 3:
+ if (tolen < 3)
+ return -ENAMETOOLONG;
memcpy(p, "../", 3);
p += 3;
+ tolen -= 3;
break;
case 4:
+ if (tolen < 2)
+ return -ENAMETOOLONG;
memcpy(p, "./", 2);
p += 2;
+ tolen -= 2;
/* that would be . - just ignore */
break;
case 5:
- p += udf_get_filename(sb, pc->componentIdent, p,
- pc->lengthComponentIdent);
+ elen += pc->lengthComponentIdent;
+ if (elen > fromlen)
+ return -EIO;
+ comp_len = udf_get_filename(sb, pc->componentIdent,
+ pc->lengthComponentIdent,
+ p, tolen);
+ p += comp_len;
+ tolen -= comp_len;
+ if (tolen == 0)
+ return -ENAMETOOLONG;
*p++ = '/';
+ tolen--;
break;
}
- elen += sizeof(struct pathComponent) + pc->lengthComponentIdent;
}
if (p > to + 1)
p[-1] = '\0';
else
p[0] = '\0';
+ return 0;
}
static int udf_symlink_filler(struct file *file, struct page *page)
struct inode *inode = page->mapping->host;
struct buffer_head *bh = NULL;
unsigned char *symlink;
- int err = -EIO;
+ int err;
unsigned char *p = kmap(page);
struct udf_inode_info *iinfo;
uint32_t pos;
+ /* We don't support symlinks longer than one block */
+ if (inode->i_size > inode->i_sb->s_blocksize) {
+ err = -ENAMETOOLONG;
+ goto out_unmap;
+ }
+
iinfo = UDF_I(inode);
pos = udf_block_map(inode, 0);
} else {
bh = sb_bread(inode->i_sb, pos);
- if (!bh)
- goto out;
+ if (!bh) {
+ err = -EIO;
+ goto out_unlock_inode;
+ }
symlink = bh->b_data;
}
- udf_pc_to_char(inode->i_sb, symlink, inode->i_size, p);
+ err = udf_pc_to_char(inode->i_sb, symlink, inode->i_size, p, PAGE_SIZE);
brelse(bh);
+ if (err)
+ goto out_unlock_inode;
up_read(&iinfo->i_data_sem);
SetPageUptodate(page);
unlock_page(page);
return 0;
-out:
+out_unlock_inode:
up_read(&iinfo->i_data_sem);
SetPageError(page);
+out_unmap:
kunmap(page);
unlock_page(page);
return err;
}
/* unicode.c */
-extern int udf_get_filename(struct super_block *, uint8_t *, uint8_t *, int);
+extern int udf_get_filename(struct super_block *, uint8_t *, int, uint8_t *,
+ int);
extern int udf_put_filename(struct super_block *, const uint8_t *, uint8_t *,
int);
extern int udf_build_ustr(struct ustr *, dstring *, int);
#include "udf_sb.h"
-static int udf_translate_to_linux(uint8_t *, uint8_t *, int, uint8_t *, int);
+static int udf_translate_to_linux(uint8_t *, int, uint8_t *, int, uint8_t *,
+ int);
static int udf_char_to_ustr(struct ustr *dest, const uint8_t *src, int strlen)
{
return u_len + 1;
}
-int udf_get_filename(struct super_block *sb, uint8_t *sname, uint8_t *dname,
- int flen)
+int udf_get_filename(struct super_block *sb, uint8_t *sname, int slen,
+ uint8_t *dname, int dlen)
{
struct ustr *filename, *unifilename;
int len = 0;
if (!unifilename)
goto out1;
- if (udf_build_ustr_exact(unifilename, sname, flen))
+ if (udf_build_ustr_exact(unifilename, sname, slen))
goto out2;
if (UDF_QUERY_FLAG(sb, UDF_FLAG_UTF8)) {
} else
goto out2;
- len = udf_translate_to_linux(dname, filename->u_name, filename->u_len,
+ len = udf_translate_to_linux(dname, dlen,
+ filename->u_name, filename->u_len,
unifilename->u_name, unifilename->u_len);
out2:
kfree(unifilename);
#define EXT_MARK '.'
#define CRC_MARK '#'
#define EXT_SIZE 5
+/* Number of chars we need to store generated CRC to make filename unique */
+#define CRC_LEN 5
-static int udf_translate_to_linux(uint8_t *newName, uint8_t *udfName,
- int udfLen, uint8_t *fidName,
- int fidNameLen)
+static int udf_translate_to_linux(uint8_t *newName, int newLen,
+ uint8_t *udfName, int udfLen,
+ uint8_t *fidName, int fidNameLen)
{
int index, newIndex = 0, needsCRC = 0;
int extIndex = 0, newExtIndex = 0, hasExt = 0;
newExtIndex = newIndex;
}
}
- if (newIndex < 256)
+ if (newIndex < newLen)
newName[newIndex++] = curr;
else
needsCRC = 1;
}
ext[localExtIndex++] = curr;
}
- maxFilenameLen = 250 - localExtIndex;
+ maxFilenameLen = newLen - CRC_LEN - localExtIndex;
if (newIndex > maxFilenameLen)
newIndex = maxFilenameLen;
else
newIndex = newExtIndex;
- } else if (newIndex > 250)
- newIndex = 250;
+ } else if (newIndex > newLen - CRC_LEN)
+ newIndex = newLen - CRC_LEN;
newName[newIndex++] = CRC_MARK;
valueCRC = crc_itu_t(0, fidName, fidNameLen);
newName[newIndex++] = hex_asc_upper_hi(valueCRC >> 8);
struct acpi_processor {
acpi_handle handle;
u32 acpi_id;
- u32 apic_id;
- u32 id;
+ u32 phys_id; /* CPU hardware ID such as APIC ID for x86 */
+ u32 id; /* CPU logical ID allocated by OS */
u32 pblk;
int performance_platform_limit;
int throttling_platform_limit;
#endif /* CONFIG_CPU_FREQ */
/* in processor_core.c */
-int acpi_get_apicid(acpi_handle, int type, u32 acpi_id);
-int acpi_map_cpuid(int apic_id, u32 acpi_id);
+int acpi_get_phys_id(acpi_handle, int type, u32 acpi_id);
+int acpi_map_cpuid(int phys_id, u32 acpi_id);
int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id);
/* in processor_pdc.c */
extern int drm_wait_vblank(struct drm_device *dev, void *data,
struct drm_file *filp);
extern u32 drm_vblank_count(struct drm_device *dev, int crtc);
+extern u32 drm_crtc_vblank_count(struct drm_crtc *crtc);
extern u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc,
struct timeval *vblanktime);
extern void drm_send_vblank_event(struct drm_device *dev, int crtc,
struct drm_pending_vblank_event *e);
+extern void drm_crtc_send_vblank_event(struct drm_crtc *crtc,
+ struct drm_pending_vblank_event *e);
extern bool drm_handle_vblank(struct drm_device *dev, int crtc);
+extern bool drm_crtc_handle_vblank(struct drm_crtc *crtc);
extern int drm_vblank_get(struct drm_device *dev, int crtc);
extern void drm_vblank_put(struct drm_device *dev, int crtc);
extern int drm_crtc_vblank_get(struct drm_crtc *crtc);
* simply leave it as NULL.
*/
struct dma_buf_attachment *import_attach;
-
- /**
- * dumb - created as dumb buffer
- * Whether the gem object was created using the dumb buffer interface
- * as such it may not be used for GPU rendering.
- */
- bool dumb;
};
void drm_gem_object_release(struct drm_gem_object *obj);
#define R8A7790_CLK_LVDS0 26
/* MSTP8 */
+#define R8A7790_CLK_MLB 2
#define R8A7790_CLK_VIN3 8
#define R8A7790_CLK_VIN2 9
#define R8A7790_CLK_VIN1 10
#define R8A7791_CLK_LVDS0 26
/* MSTP8 */
+#define R8A7791_CLK_IPMMU_SGX 0
+#define R8A7791_CLK_MLB 2
#define R8A7791_CLK_VIN2 9
#define R8A7791_CLK_VIN1 10
#define R8A7791_CLK_VIN0 11
#define R8A7794_CLK_SCIFB1 7
#define R8A7794_CLK_MSIOF1 8
#define R8A7794_CLK_SCIFB2 16
+#define R8A7794_CLK_SYS_DMAC1 18
+#define R8A7794_CLK_SYS_DMAC0 19
/* MSTP3 */
+#define R8A7794_CLK_SDHI2 11
+#define R8A7794_CLK_SDHI1 12
+#define R8A7794_CLK_SDHI0 14
+#define R8A7794_CLK_MMCIF0 15
#define R8A7794_CLK_CMT1 29
+#define R8A7794_CLK_USBDMAC0 30
+#define R8A7794_CLK_USBDMAC1 31
/* MSTP5 */
#define R8A7794_CLK_THERMAL 22
#define R8A7794_CLK_PWM 23
/* MSTP7 */
+#define R8A7794_CLK_EHCI 3
+#define R8A7794_CLK_HSUSB 4
#define R8A7794_CLK_HSCIF2 13
#define R8A7794_CLK_SCIF5 14
#define R8A7794_CLK_SCIF4 15
#define R8A7794_CLK_GPIO2 10
#define R8A7794_CLK_GPIO1 11
#define R8A7794_CLK_GPIO0 12
+#define R8A7794_CLK_QSPI_MOD 17
+#define R8A7794_CLK_I2C5 25
+#define R8A7794_CLK_I2C4 27
+#define R8A7794_CLK_I2C3 28
+#define R8A7794_CLK_I2C2 29
+#define R8A7794_CLK_I2C1 30
+#define R8A7794_CLK_I2C0 31
/* MSTP11 */
#define R8A7794_CLK_SCIFA3 6
--- /dev/null
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH418 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH418
+#define _DT_BINDINGS_CLK_STIH418
+
+#include "stih410-clks.h"
+
+/* STiH418 introduces new clock outputs compared to STiH410 */
+
+/* CLOCKGEN C0 */
+#define CLK_PROC_BDISP_0 14
+#define CLK_PROC_BDISP_1 15
+#define CLK_TX_ICN_1 23
+#define CLK_ETH_PHYREF 27
+#define CLK_PP_HEVC 35
+#define CLK_CLUST_HEVC 36
+#define CLK_HWPE_HEVC 37
+#define CLK_FC_HEVC 38
+#define CLK_PROC_MIXER 39
+#define CLK_PROC_SC 40
+#define CLK_AVSP_HEVC 41
+
+/* CLOCKGEN D2 */
+#undef CLK_PIX_PIP
+#undef CLK_PIX_GDP1
+#undef CLK_PIX_GDP2
+#undef CLK_PIX_GDP3
+#undef CLK_PIX_GDP4
+
+#define CLK_TMDS_HDMI_DIV2 5
+#define CLK_VP9 47
+#endif
#define VF610_PLL5_BYPASS 179
#define VF610_PLL6_BYPASS 180
#define VF610_PLL7_BYPASS 181
-#define VF610_CLK_END 182
+#define VF610_CLK_SNVS 182
+#define VF610_CLK_END 183
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
--- /dev/null
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __DT_BINDINGS_DMA_SUN4I_A10_H_
+#define __DT_BINDINGS_DMA_SUN4I_A10_H_
+
+#define SUN4I_DMA_NORMAL 0
+#define SUN4I_DMA_DEDICATED 1
+
+#endif /* __DT_BINDINGS_DMA_SUN4I_A10_H_ */
#define OMAP3430_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25d8) (val)
#define OMAP3630_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25a0) (val)
#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
+#define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define AM4372_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define DRA7XX_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x3400) (val)
--- /dev/null
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_SUN4I_A10_H_
+#define __DT_BINDINGS_PINCTRL_SUN4I_A10_H_
+
+#define SUN4I_PINCTRL_10_MA 0
+#define SUN4I_PINCTRL_20_MA 1
+#define SUN4I_PINCTRL_30_MA 2
+#define SUN4I_PINCTRL_40_MA 3
+
+#define SUN4I_PINCTRL_NO_PULL 0
+#define SUN4I_PINCTRL_PULL_UP 1
+#define SUN4I_PINCTRL_PULL_DOWN 2
+
+#endif /* __DT_BINDINGS_PINCTRL_SUN4I_A10_H_ */
#define _DT_BINDINGS_THERMAL_THERMAL_H
/* On cooling devices upper and lower limits */
-#define THERMAL_NO_LIMIT (-1UL)
+#define THERMAL_NO_LIMIT (~0)
#endif
#ifdef CONFIG_ACPI_HOTPLUG_CPU
/* Arch dependent functions for cpu hotplug support */
-int acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu);
-int acpi_unmap_lsapic(int cpu);
+int acpi_map_cpu(acpi_handle handle, int physid, int *pcpu);
+int acpi_unmap_cpu(int cpu);
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base);
struct audit_krule {
int vers_ops;
+ u32 pflags;
u32 flags;
u32 listnr;
u32 action;
u64 prio;
};
+/* Flag to indicate legacy AUDIT_LOGINUID unset usage */
+#define AUDIT_LOGINUID_LEGACY 0x1
+
struct audit_field {
u32 type;
union {
struct ceph_osd_data osd_data;
} extent;
struct {
- __le32 name_len;
- __le32 value_len;
+ u32 name_len;
+ u32 value_len;
__u8 cmp_op; /* CEPH_OSD_CMPXATTR_OP_* */
__u8 cmp_mode; /* CEPH_OSD_CMPXATTR_MODE_* */
struct ceph_osd_data osd_data;
of_cpufreq_cooling_register(struct device_node *np,
const struct cpumask *clip_cpus)
{
- return NULL;
+ return ERR_PTR(-ENOSYS);
}
#endif
static inline struct thermal_cooling_device *
cpufreq_cooling_register(const struct cpumask *clip_cpus)
{
- return NULL;
+ return ERR_PTR(-ENOSYS);
}
static inline struct thermal_cooling_device *
of_cpufreq_cooling_register(struct device_node *np,
const struct cpumask *clip_cpus)
{
- return NULL;
+ return ERR_PTR(-ENOSYS);
}
static inline
void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
};
/* Idle State Flags */
-#define CPUIDLE_FLAG_TIME_INVALID (0x01) /* is residency time measurable? */
#define CPUIDLE_FLAG_COUPLED (0x02) /* state applies to multiple cpus */
#define CPUIDLE_FLAG_TIMER_STOP (0x04) /* timer is stopped on this state */
/**
* cpuidle_get_last_residency - retrieves the last state's residency time
* @dev: the target CPU
- *
- * NOTE: this value is invalid if CPUIDLE_FLAG_TIME_INVALID is set
*/
static inline int cpuidle_get_last_residency(struct cpuidle_device *dev)
{
#define FMODE_CAN_WRITE ((__force fmode_t)0x40000)
/* File was opened by fanotify and shouldn't generate fanotify events */
-#define FMODE_NONOTIFY ((__force fmode_t)0x1000000)
+#define FMODE_NONOTIFY ((__force fmode_t)0x4000000)
/*
* Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
* Copyright (C) 2009 Jason Wessel <jason.wessel@windriver.com>
*/
+/* Shifted versions of the command enable bits are be used if the command
+ * has no arguments (see kdb_check_flags). This allows commands, such as
+ * go, to have different permissions depending upon whether it is called
+ * with an argument.
+ */
+#define KDB_ENABLE_NO_ARGS_SHIFT 10
+
typedef enum {
- KDB_REPEAT_NONE = 0, /* Do not repeat this command */
- KDB_REPEAT_NO_ARGS, /* Repeat the command without arguments */
- KDB_REPEAT_WITH_ARGS, /* Repeat the command including its arguments */
-} kdb_repeat_t;
+ KDB_ENABLE_ALL = (1 << 0), /* Enable everything */
+ KDB_ENABLE_MEM_READ = (1 << 1),
+ KDB_ENABLE_MEM_WRITE = (1 << 2),
+ KDB_ENABLE_REG_READ = (1 << 3),
+ KDB_ENABLE_REG_WRITE = (1 << 4),
+ KDB_ENABLE_INSPECT = (1 << 5),
+ KDB_ENABLE_FLOW_CTRL = (1 << 6),
+ KDB_ENABLE_SIGNAL = (1 << 7),
+ KDB_ENABLE_REBOOT = (1 << 8),
+ /* User exposed values stop here, all remaining flags are
+ * exclusively used to describe a commands behaviour.
+ */
+
+ KDB_ENABLE_ALWAYS_SAFE = (1 << 9),
+ KDB_ENABLE_MASK = (1 << KDB_ENABLE_NO_ARGS_SHIFT) - 1,
+
+ KDB_ENABLE_ALL_NO_ARGS = KDB_ENABLE_ALL << KDB_ENABLE_NO_ARGS_SHIFT,
+ KDB_ENABLE_MEM_READ_NO_ARGS = KDB_ENABLE_MEM_READ
+ << KDB_ENABLE_NO_ARGS_SHIFT,
+ KDB_ENABLE_MEM_WRITE_NO_ARGS = KDB_ENABLE_MEM_WRITE
+ << KDB_ENABLE_NO_ARGS_SHIFT,
+ KDB_ENABLE_REG_READ_NO_ARGS = KDB_ENABLE_REG_READ
+ << KDB_ENABLE_NO_ARGS_SHIFT,
+ KDB_ENABLE_REG_WRITE_NO_ARGS = KDB_ENABLE_REG_WRITE
+ << KDB_ENABLE_NO_ARGS_SHIFT,
+ KDB_ENABLE_INSPECT_NO_ARGS = KDB_ENABLE_INSPECT
+ << KDB_ENABLE_NO_ARGS_SHIFT,
+ KDB_ENABLE_FLOW_CTRL_NO_ARGS = KDB_ENABLE_FLOW_CTRL
+ << KDB_ENABLE_NO_ARGS_SHIFT,
+ KDB_ENABLE_SIGNAL_NO_ARGS = KDB_ENABLE_SIGNAL
+ << KDB_ENABLE_NO_ARGS_SHIFT,
+ KDB_ENABLE_REBOOT_NO_ARGS = KDB_ENABLE_REBOOT
+ << KDB_ENABLE_NO_ARGS_SHIFT,
+ KDB_ENABLE_ALWAYS_SAFE_NO_ARGS = KDB_ENABLE_ALWAYS_SAFE
+ << KDB_ENABLE_NO_ARGS_SHIFT,
+ KDB_ENABLE_MASK_NO_ARGS = KDB_ENABLE_MASK << KDB_ENABLE_NO_ARGS_SHIFT,
+
+ KDB_REPEAT_NO_ARGS = 0x40000000, /* Repeat the command w/o arguments */
+ KDB_REPEAT_WITH_ARGS = 0x80000000, /* Repeat the command with args */
+} kdb_cmdflags_t;
typedef int (*kdb_func_t)(int, const char **);
#define KDB_BADLENGTH (-19)
#define KDB_NOBP (-20)
#define KDB_BADADDR (-21)
+#define KDB_NOPERM (-22)
/*
* kdb_diemsg
/* Dynamic kdb shell command registration */
extern int kdb_register(char *, kdb_func_t, char *, char *, short);
-extern int kdb_register_repeat(char *, kdb_func_t, char *, char *,
- short, kdb_repeat_t);
+extern int kdb_register_flags(char *, kdb_func_t, char *, char *,
+ short, kdb_cmdflags_t);
extern int kdb_unregister(char *);
#else /* ! CONFIG_KGDB_KDB */
static inline __printf(1, 2) int kdb_printf(const char *fmt, ...) { return 0; }
static inline void kdb_init(int level) {}
static inline int kdb_register(char *cmd, kdb_func_t func, char *usage,
char *help, short minlen) { return 0; }
-static inline int kdb_register_repeat(char *cmd, kdb_func_t func, char *usage,
- char *help, short minlen,
- kdb_repeat_t repeat) { return 0; }
+static inline int kdb_register_flags(char *cmd, kdb_func_t func, char *usage,
+ char *help, short minlen,
+ kdb_cmdflags_t flags) { return 0; }
static inline int kdb_unregister(char *cmd) { return 0; }
#endif /* CONFIG_KGDB_KDB */
enum {
STMPE_IDX_GPEDR_MSB,
STMPE_IDX_GPRER_LSB,
STMPE_IDX_GPFER_LSB,
+ STMPE_IDX_GPPUR_LSB,
+ STMPE_IDX_GPPDR_LSB,
STMPE_IDX_GPAFR_U_MSB,
STMPE_IDX_IEGPIOR_LSB,
STMPE_IDX_ISGPIOR_LSB,
extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
-struct matrix_keymap_data;
-
-/**
- * struct stmpe_keypad_platform_data - STMPE keypad platform data
- * @keymap_data: key map table and size
- * @debounce_ms: debounce interval, in ms. Maximum is
- * %STMPE_KEYPAD_MAX_DEBOUNCE.
- * @scan_count: number of key scanning cycles to confirm key data.
- * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
- * @no_autorepeat: disable key autorepeat
- */
-struct stmpe_keypad_platform_data {
- const struct matrix_keymap_data *keymap_data;
- unsigned int debounce_ms;
- unsigned int scan_count;
- bool no_autorepeat;
-};
-
#define STMPE_GPIO_NOREQ_811_TOUCH (0xf0)
/**
* @irq_gpio: gpio number over which irq will be requested (significant only if
* irq_over_gpio is true)
* @gpio: GPIO-specific platform data
- * @keypad: keypad-specific platform data
* @ts: touchscreen-specific platform data
*/
struct stmpe_platform_data {
int autosleep_timeout;
struct stmpe_gpio_platform_data *gpio;
- struct stmpe_keypad_platform_data *keypad;
struct stmpe_ts_platform_data *ts;
};
#if VM_GROWSUP
extern int expand_upwards(struct vm_area_struct *vma, unsigned long address);
#else
- #define expand_upwards(vma, address) do { } while (0)
+ #define expand_upwards(vma, address) (0)
#endif
/* Look up the first VMA which satisfies addr < vm_end, NULL if none. */
* Callback to use for xmit over the accelerated station. This
* is used in place of ndo_start_xmit on accelerated net
* devices.
- * bool (*ndo_gso_check) (struct sk_buff *skb,
- * struct net_device *dev);
+ * netdev_features_t (*ndo_features_check) (struct sk_buff *skb,
+ * struct net_device *dev
+ * netdev_features_t features);
* Called by core transmit path to determine if device is capable of
- * performing GSO on a packet. The device returns true if it is
- * able to GSO the packet, false otherwise. If the return value is
- * false the stack will do software GSO.
+ * performing offload operations on a given packet. This is to give
+ * the device an opportunity to implement any restrictions that cannot
+ * be otherwise expressed by feature flags. The check is called with
+ * the set of features that the stack has calculated and it returns
+ * those the driver believes to be appropriate.
*
* int (*ndo_switch_parent_id_get)(struct net_device *dev,
* struct netdev_phys_item_id *psid);
struct net_device *dev,
void *priv);
int (*ndo_get_lock_subclass)(struct net_device *dev);
- bool (*ndo_gso_check) (struct sk_buff *skb,
- struct net_device *dev);
+ netdev_features_t (*ndo_features_check) (struct sk_buff *skb,
+ struct net_device *dev,
+ netdev_features_t features);
#ifdef CONFIG_NET_SWITCHDEV
int (*ndo_switch_parent_id_get)(struct net_device *dev,
struct netdev_phys_item_id *psid);
netdev_features_t features)
{
return skb_is_gso(skb) && (!skb_gso_ok(skb, features) ||
- (dev->netdev_ops->ndo_gso_check &&
- !dev->netdev_ops->ndo_gso_check(skb, dev)) ||
unlikely((skb->ip_summed != CHECKSUM_PARTIAL) &&
(skb->ip_summed != CHECKSUM_UNNECESSARY)));
}
unsigned int flags;
void (*input)(struct sk_buff *skb);
struct mutex *cb_mutex;
- int (*bind)(int group);
- void (*unbind)(int group);
+ int (*bind)(struct net *net, int group);
+ void (*unbind)(struct net *net, int group);
bool (*compare)(struct net *net, struct sock *sk);
};
#define FGP_NOWAIT 0x00000020
struct page *pagecache_get_page(struct address_space *mapping, pgoff_t offset,
- int fgp_flags, gfp_t cache_gfp_mask, gfp_t radix_gfp_mask);
+ int fgp_flags, gfp_t cache_gfp_mask);
/**
* find_get_page - find and get a page reference
static inline struct page *find_get_page(struct address_space *mapping,
pgoff_t offset)
{
- return pagecache_get_page(mapping, offset, 0, 0, 0);
+ return pagecache_get_page(mapping, offset, 0, 0);
}
static inline struct page *find_get_page_flags(struct address_space *mapping,
pgoff_t offset, int fgp_flags)
{
- return pagecache_get_page(mapping, offset, fgp_flags, 0, 0);
+ return pagecache_get_page(mapping, offset, fgp_flags, 0);
}
/**
static inline struct page *find_lock_page(struct address_space *mapping,
pgoff_t offset)
{
- return pagecache_get_page(mapping, offset, FGP_LOCK, 0, 0);
+ return pagecache_get_page(mapping, offset, FGP_LOCK, 0);
}
/**
{
return pagecache_get_page(mapping, offset,
FGP_LOCK|FGP_ACCESSED|FGP_CREAT,
- gfp_mask, gfp_mask & GFP_RECLAIM_MASK);
+ gfp_mask);
}
/**
{
return pagecache_get_page(mapping, index,
FGP_LOCK|FGP_CREAT|FGP_NOFS|FGP_NOWAIT,
- mapping_gfp_mask(mapping),
- GFP_NOFS);
+ mapping_gfp_mask(mapping));
}
struct page *find_get_entry(struct address_space *mapping, pgoff_t offset);
struct perf_branch_entry entries[0];
};
-struct perf_regs {
- __u64 abi;
- struct pt_regs *regs;
-};
-
struct task_struct;
/*
u32 reserved;
} cpu_entry;
struct perf_callchain_entry *callchain;
+
+ /*
+ * regs_user may point to task_pt_regs or to regs_user_copy, depending
+ * on arch details.
+ */
struct perf_regs regs_user;
+ struct pt_regs regs_user_copy;
+
struct perf_regs regs_intr;
u64 stack_user_size;
} ____cacheline_aligned;
#ifndef _LINUX_PERF_REGS_H
#define _LINUX_PERF_REGS_H
+struct perf_regs {
+ __u64 abi;
+ struct pt_regs *regs;
+};
+
#ifdef CONFIG_HAVE_PERF_REGS
#include <asm/perf_regs.h>
u64 perf_reg_value(struct pt_regs *regs, int idx);
int perf_reg_validate(u64 mask);
u64 perf_reg_abi(struct task_struct *task);
+void perf_get_regs_user(struct perf_regs *regs_user,
+ struct pt_regs *regs,
+ struct pt_regs *regs_user_copy);
#else
static inline u64 perf_reg_value(struct pt_regs *regs, int idx)
{
{
return PERF_SAMPLE_REGS_ABI_NONE;
}
+
+static inline void perf_get_regs_user(struct perf_regs *regs_user,
+ struct pt_regs *regs,
+ struct pt_regs *regs_user_copy)
+{
+ regs_user->regs = task_pt_regs(current);
+ regs_user->abi = perf_reg_abi(current);
+}
#endif /* CONFIG_HAVE_PERF_REGS */
#endif /* _LINUX_PERF_REGS_H */
int __of_genpd_add_provider(struct device_node *np, genpd_xlate_t xlate,
void *data);
void of_genpd_del_provider(struct device_node *np);
+struct generic_pm_domain *of_genpd_get_from_provider(
+ struct of_phandle_args *genpdspec);
struct generic_pm_domain *__of_genpd_xlate_simple(
struct of_phandle_args *genpdspec,
}
static inline void of_genpd_del_provider(struct device_node *np) {}
+static inline struct generic_pm_domain *of_genpd_get_from_provider(
+ struct of_phandle_args *genpdspec)
+{
+ return NULL;
+}
+
#define __of_genpd_xlate_simple NULL
#define __of_genpd_xlate_onecell NULL
*/
atomic_t refcount;
+ /*
+ * Count of child anon_vmas and VMAs which points to this anon_vma.
+ *
+ * This counter is used for making decision about reusing anon_vma
+ * instead of forking new one. See comments in function anon_vma_clone.
+ */
+ unsigned degree;
+
+ struct anon_vma *parent; /* Parent of this anon_vma */
+
/*
* NOTE: the LSB of the rb_root.rb_node is set by
* mm_take_all_locks() _after_ taking the above lock. So the
#define THERMAL_CSTATE_INVALID -1UL
/* No upper/lower limit requirement */
-#define THERMAL_NO_LIMIT THERMAL_CSTATE_INVALID
+#define THERMAL_NO_LIMIT ((u32)~0)
/* Unit conversion macros */
#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \
struct writeback_control *wbc, writepage_t writepage,
void *data);
int do_writepages(struct address_space *mapping, struct writeback_control *wbc);
-void set_page_dirty_balance(struct page *page);
void writeback_set_ratelimit(void);
void tag_pages_for_writeback(struct address_space *mapping,
pgoff_t start, pgoff_t end);
* do additional, common, filtering and return an error
* @post_doit: called after an operation's doit callback, it may
* undo operations done by pre_doit, for example release locks
+ * @mcast_bind: a socket bound to the given multicast group (which
+ * is given as the offset into the groups array)
+ * @mcast_unbind: a socket was unbound from the given multicast group
* @attrbuf: buffer to store parsed attributes
* @family_list: family list
* @mcgrps: multicast groups used by this family (private)
void (*post_doit)(const struct genl_ops *ops,
struct sk_buff *skb,
struct genl_info *info);
+ int (*mcast_bind)(struct net *net, int group);
+ void (*mcast_unbind)(struct net *net, int group);
struct nlattr ** attrbuf; /* private */
const struct genl_ops * ops; /* private */
const struct genl_multicast_group *mcgrps; /* private */
}
static inline int genl_has_listeners(struct genl_family *family,
- struct sock *sk, unsigned int group)
+ struct net *net, unsigned int group)
{
if (WARN_ON_ONCE(group >= family->n_mcgrps))
return -EINVAL;
group = family->mcgrp_offset + group;
- return netlink_has_listeners(sk, group);
+ return netlink_has_listeners(net->genl_sock, group);
}
#endif /* __NET_GENERIC_NETLINK_H */
*
* @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the
* driver to indicate that it requires IV generation for this
- * particular key. Setting this flag does not necessarily mean that SKBs
- * will have sufficient tailroom for ICV or MIC.
+ * particular key.
* @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by
* the driver for a TKIP key if it requires Michael MIC
* generation in software.
* @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
* if space should be prepared for the IV, but the IV
* itself should not be generated. Do not set together with
- * @IEEE80211_KEY_FLAG_GENERATE_IV on the same key. Setting this flag does
- * not necessarily mean that SKBs will have sufficient tailroom for ICV or
- * MIC.
+ * @IEEE80211_KEY_FLAG_GENERATE_IV on the same key.
* @IEEE80211_KEY_FLAG_RX_MGMT: This key will be used to decrypt received
* management frames. The flag can help drivers that have a hardware
* crypto implementation that doesn't deal with management frames
struct neigh_table {
- struct neigh_table *next;
int family;
int entry_size;
int key_len;
#ifndef __NET_VXLAN_H
#define __NET_VXLAN_H 1
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/if_vlan.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/udp.h>
__be32 src, __be32 dst, __u8 tos, __u8 ttl, __be16 df,
__be16 src_port, __be16 dst_port, __be32 vni, bool xnet);
-static inline bool vxlan_gso_check(struct sk_buff *skb)
+static inline netdev_features_t vxlan_features_check(struct sk_buff *skb,
+ netdev_features_t features)
{
- if ((skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL) &&
+ u8 l4_hdr = 0;
+
+ if (!skb->encapsulation)
+ return features;
+
+ switch (vlan_get_protocol(skb)) {
+ case htons(ETH_P_IP):
+ l4_hdr = ip_hdr(skb)->protocol;
+ break;
+ case htons(ETH_P_IPV6):
+ l4_hdr = ipv6_hdr(skb)->nexthdr;
+ break;
+ default:
+ return features;;
+ }
+
+ if ((l4_hdr == IPPROTO_UDP) &&
(skb->inner_protocol_type != ENCAP_TYPE_ETHER ||
skb->inner_protocol != htons(ETH_P_TEB) ||
(skb_inner_mac_header(skb) - skb_transport_header(skb) !=
sizeof(struct udphdr) + sizeof(struct vxlanhdr))))
- return false;
+ return features & ~(NETIF_F_ALL_CSUM | NETIF_F_GSO_MASK);
- return true;
+ return features;
}
/* IP header + UDP + VXLAN + Ethernet header */
}
/**
- * params_channels - Get the sample rate from the hw params
+ * params_rate - Get the sample rate from the hw params
* @p: hw params
*/
static inline unsigned int params_rate(const struct snd_pcm_hw_params *p)
}
/**
- * params_channels - Get the period size (in frames) from the hw params
+ * params_period_size - Get the period size (in frames) from the hw params
* @p: hw params
*/
static inline unsigned int params_period_size(const struct snd_pcm_hw_params *p)
}
/**
- * params_channels - Get the number of periods from the hw params
+ * params_periods - Get the number of periods from the hw params
* @p: hw params
*/
static inline unsigned int params_periods(const struct snd_pcm_hw_params *p)
}
/**
- * params_channels - Get the buffer size (in frames) from the hw params
+ * params_buffer_size - Get the buffer size (in frames) from the hw params
* @p: hw params
*/
static inline unsigned int params_buffer_size(const struct snd_pcm_hw_params *p)
}
/**
- * params_channels - Get the buffer size (in bytes) from the hw params
+ * params_buffer_bytes - Get the buffer size (in bytes) from the hw params
* @p: hw params
*/
static inline unsigned int params_buffer_bytes(const struct snd_pcm_hw_params *p)
/*
* FMODE_EXEC is 0x20
- * FMODE_NONOTIFY is 0x1000000
+ * FMODE_NONOTIFY is 0x4000000
* These cannot be used by userspace O_* until internal and external open
* flags are split.
* -Eric Paris
/*
* IPV6 socket options
*/
-
+#if __UAPI_DEF_IPV6_OPTIONS
#define IPV6_ADDRFORM 1
#define IPV6_2292PKTINFO 2
#define IPV6_2292HOPOPTS 3
#define IPV6_IPSEC_POLICY 34
#define IPV6_XFRM_POLICY 35
+#endif
/*
* Multicast:
uint32_t pad;
};
-#define KFD_IOC_MAGIC 'K'
+#define AMDKFD_IOCTL_BASE 'K'
+#define AMDKFD_IO(nr) _IO(AMDKFD_IOCTL_BASE, nr)
+#define AMDKFD_IOR(nr, type) _IOR(AMDKFD_IOCTL_BASE, nr, type)
+#define AMDKFD_IOW(nr, type) _IOW(AMDKFD_IOCTL_BASE, nr, type)
+#define AMDKFD_IOWR(nr, type) _IOWR(AMDKFD_IOCTL_BASE, nr, type)
-#define KFD_IOC_GET_VERSION \
- _IOR(KFD_IOC_MAGIC, 1, struct kfd_ioctl_get_version_args)
+#define AMDKFD_IOC_GET_VERSION \
+ AMDKFD_IOR(0x01, struct kfd_ioctl_get_version_args)
-#define KFD_IOC_CREATE_QUEUE \
- _IOWR(KFD_IOC_MAGIC, 2, struct kfd_ioctl_create_queue_args)
+#define AMDKFD_IOC_CREATE_QUEUE \
+ AMDKFD_IOWR(0x02, struct kfd_ioctl_create_queue_args)
-#define KFD_IOC_DESTROY_QUEUE \
- _IOWR(KFD_IOC_MAGIC, 3, struct kfd_ioctl_destroy_queue_args)
+#define AMDKFD_IOC_DESTROY_QUEUE \
+ AMDKFD_IOWR(0x03, struct kfd_ioctl_destroy_queue_args)
-#define KFD_IOC_SET_MEMORY_POLICY \
- _IOW(KFD_IOC_MAGIC, 4, struct kfd_ioctl_set_memory_policy_args)
+#define AMDKFD_IOC_SET_MEMORY_POLICY \
+ AMDKFD_IOW(0x04, struct kfd_ioctl_set_memory_policy_args)
-#define KFD_IOC_GET_CLOCK_COUNTERS \
- _IOWR(KFD_IOC_MAGIC, 5, struct kfd_ioctl_get_clock_counters_args)
+#define AMDKFD_IOC_GET_CLOCK_COUNTERS \
+ AMDKFD_IOWR(0x05, struct kfd_ioctl_get_clock_counters_args)
-#define KFD_IOC_GET_PROCESS_APERTURES \
- _IOR(KFD_IOC_MAGIC, 6, struct kfd_ioctl_get_process_apertures_args)
+#define AMDKFD_IOC_GET_PROCESS_APERTURES \
+ AMDKFD_IOR(0x06, struct kfd_ioctl_get_process_apertures_args)
-#define KFD_IOC_UPDATE_QUEUE \
- _IOW(KFD_IOC_MAGIC, 7, struct kfd_ioctl_update_queue_args)
+#define AMDKFD_IOC_UPDATE_QUEUE \
+ AMDKFD_IOW(0x07, struct kfd_ioctl_update_queue_args)
+
+#define AMDKFD_COMMAND_START 0x01
+#define AMDKFD_COMMAND_END 0x08
#endif
#define __UAPI_DEF_SOCKADDR_IN6 0
#define __UAPI_DEF_IPV6_MREQ 0
#define __UAPI_DEF_IPPROTO_V6 0
+#define __UAPI_DEF_IPV6_OPTIONS 0
#else
#define __UAPI_DEF_SOCKADDR_IN6 1
#define __UAPI_DEF_IPV6_MREQ 1
#define __UAPI_DEF_IPPROTO_V6 1
+#define __UAPI_DEF_IPV6_OPTIONS 1
#endif /* _NETINET_IN_H */
#define __UAPI_DEF_SOCKADDR_IN6 1
#define __UAPI_DEF_IPV6_MREQ 1
#define __UAPI_DEF_IPPROTO_V6 1
+#define __UAPI_DEF_IPV6_OPTIONS 1
/* Definitions for xattr.h */
#define __UAPI_DEF_XATTR 1
struct vring_used *used;
};
+/* Alignment requirements for vring elements.
+ * When using pre-virtio 1.0 layout, these fall out naturally.
+ */
+#define VRING_AVAIL_ALIGN_SIZE 2
+#define VRING_USED_ALIGN_SIZE 4
+#define VRING_DESC_ALIGN_SIZE 16
+
/* The standard layout for the ring is a continuous chunk of memory which looks
* like this. We assume num is a power of 2.
*
* This function doesn't consume an skb as might be expected since it has to
* copy it anyways.
*/
-static void kauditd_send_multicast_skb(struct sk_buff *skb)
+static void kauditd_send_multicast_skb(struct sk_buff *skb, gfp_t gfp_mask)
{
struct sk_buff *copy;
struct audit_net *aunet = net_generic(&init_net, audit_net_id);
* no reason for new multicast clients to continue with this
* non-compliance.
*/
- copy = skb_copy(skb, GFP_KERNEL);
+ copy = skb_copy(skb, gfp_mask);
if (!copy)
return;
- nlmsg_multicast(sock, copy, 0, AUDIT_NLGRP_READLOG, GFP_KERNEL);
+ nlmsg_multicast(sock, copy, 0, AUDIT_NLGRP_READLOG, gfp_mask);
}
/*
}
/* Run custom bind function on netlink socket group connect or bind requests. */
-static int audit_bind(int group)
+static int audit_bind(struct net *net, int group)
{
if (!capable(CAP_AUDIT_READ))
return -EPERM;
struct nlmsghdr *nlh = nlmsg_hdr(ab->skb);
nlh->nlmsg_len = ab->skb->len;
- kauditd_send_multicast_skb(ab->skb);
+ kauditd_send_multicast_skb(ab->skb, ab->gfp_mask);
/*
* The original kaudit unicast socket sends up messages with
if ((f->type == AUDIT_LOGINUID) && (f->val == AUDIT_UID_UNSET)) {
f->type = AUDIT_LOGINUID_SET;
f->val = 0;
- }
-
- if ((f->type == AUDIT_PID) || (f->type == AUDIT_PPID)) {
- struct pid *pid;
- rcu_read_lock();
- pid = find_vpid(f->val);
- if (!pid) {
- rcu_read_unlock();
- err = -ESRCH;
- goto exit_free;
- }
- f->val = pid_nr(pid);
- rcu_read_unlock();
+ entry->rule.pflags |= AUDIT_LOGINUID_LEGACY;
}
err = audit_field_valid(entry, f);
data->buflen += data->values[i] =
audit_pack_string(&bufp, krule->filterkey);
break;
+ case AUDIT_LOGINUID_SET:
+ if (krule->pflags & AUDIT_LOGINUID_LEGACY && !f->val) {
+ data->fields[i] = AUDIT_LOGINUID;
+ data->values[i] = AUDIT_UID_UNSET;
+ break;
+ }
+ /* fallthrough if set */
default:
data->values[i] = f->val;
}
int i;
if (a->flags != b->flags ||
+ a->pflags != b->pflags ||
a->listnr != b->listnr ||
a->action != b->action ||
a->field_count != b->field_count)
new = &entry->rule;
new->vers_ops = old->vers_ops;
new->flags = old->flags;
+ new->pflags = old->pflags;
new->listnr = old->listnr;
new->action = old->action;
for (i = 0; i < AUDIT_BITMASK_SIZE; i++)
#include <linux/fs_struct.h>
#include <linux/compat.h>
#include <linux/ctype.h>
+#include <linux/string.h>
+#include <uapi/linux/limits.h>
#include "audit.h"
}
list_for_each_entry_reverse(n, &context->names_list, list) {
- /* does the name pointer match? */
- if (!n->name || n->name->name != name->name)
+ if (!n->name || strcmp(n->name->name, name->name))
continue;
/* match the correct record type */
}
out_alloc:
- /* unable to find the name from a previous getname(). Allocate a new
- * anonymous entry.
- */
- n = audit_alloc_name(context, AUDIT_TYPE_NORMAL);
+ /* unable to find an entry with both a matching name and type */
+ n = audit_alloc_name(context, AUDIT_TYPE_UNKNOWN);
if (!n)
return;
+ /* unfortunately, while we may have a path name to record with the
+ * inode, we can't always rely on the string lasting until the end of
+ * the syscall so we need to create our own copy, it may fail due to
+ * memory allocation issues, but we do our best */
+ if (name) {
+ /* we can't use getname_kernel() due to size limits */
+ size_t len = strlen(name->name) + 1;
+ struct filename *new = __getname();
+
+ if (unlikely(!new))
+ goto out;
+
+ if (len <= (PATH_MAX - sizeof(*new))) {
+ new->name = (char *)(new) + sizeof(*new);
+ new->separate = false;
+ } else if (len <= PATH_MAX) {
+ /* this looks odd, but is due to final_putname() */
+ struct filename *new2;
+
+ new2 = kmalloc(sizeof(*new2), GFP_KERNEL);
+ if (unlikely(!new2)) {
+ __putname(new);
+ goto out;
+ }
+ new2->name = (char *)new;
+ new2->separate = true;
+ new = new2;
+ } else {
+ /* we should never get here, but let's be safe */
+ __putname(new);
+ goto out;
+ }
+ strlcpy((char *)new->name, name->name, len);
+ new->uptr = NULL;
+ new->aname = n;
+ n->name = new;
+ n->name_put = true;
+ }
out:
if (parent) {
n->name_len = n->name ? parent_len(n->name->name) : AUDIT_NAME_FULL;
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
+
+#define pr_fmt(fmt) "KGDB: " fmt
+
#include <linux/pid_namespace.h>
#include <linux/clocksource.h>
#include <linux/serial_core.h>
return err;
err = kgdb_arch_remove_breakpoint(&tmp);
if (err)
- printk(KERN_ERR "KGDB: Critical breakpoint error, kernel "
- "memory destroyed at: %lx", addr);
+ pr_err("Critical breakpoint error, kernel memory destroyed at: %lx\n",
+ addr);
return err;
}
error = kgdb_arch_set_breakpoint(&kgdb_break[i]);
if (error) {
ret = error;
- printk(KERN_INFO "KGDB: BP install failed: %lx",
- kgdb_break[i].bpt_addr);
+ pr_info("BP install failed: %lx\n",
+ kgdb_break[i].bpt_addr);
continue;
}
continue;
error = kgdb_arch_remove_breakpoint(&kgdb_break[i]);
if (error) {
- printk(KERN_INFO "KGDB: BP remove failed: %lx\n",
- kgdb_break[i].bpt_addr);
+ pr_info("BP remove failed: %lx\n",
+ kgdb_break[i].bpt_addr);
ret = error;
}
goto setundefined;
error = kgdb_arch_remove_breakpoint(&kgdb_break[i]);
if (error)
- printk(KERN_ERR "KGDB: breakpoint remove failed: %lx\n",
+ pr_err("breakpoint remove failed: %lx\n",
kgdb_break[i].bpt_addr);
setundefined:
kgdb_break[i].state = BP_UNDEFINED;
if (print_wait) {
#ifdef CONFIG_KGDB_KDB
if (!dbg_kdb_mode)
- printk(KERN_CRIT "KGDB: waiting... or $3#33 for KDB\n");
+ pr_crit("waiting... or $3#33 for KDB\n");
#else
- printk(KERN_CRIT "KGDB: Waiting for remote debugger\n");
+ pr_crit("Waiting for remote debugger\n");
#endif
}
return 1;
exception_level = 0;
kgdb_skipexception(ks->ex_vector, ks->linux_regs);
dbg_activate_sw_breakpoints();
- printk(KERN_CRIT "KGDB: re-enter error: breakpoint removed %lx\n",
- addr);
+ pr_crit("re-enter error: breakpoint removed %lx\n", addr);
WARN_ON_ONCE(1);
return 1;
panic("Recursive entry to debugger");
}
- printk(KERN_CRIT "KGDB: re-enter exception: ALL breakpoints killed\n");
+ pr_crit("re-enter exception: ALL breakpoints killed\n");
#ifdef CONFIG_KGDB_KDB
/* Allow kdb to debug itself one level */
return 0;
int cpu;
int trace_on = 0;
int online_cpus = num_online_cpus();
+ u64 time_left;
kgdb_info[ks->cpu].enter_kgdb++;
kgdb_info[ks->cpu].exception_state |= exception_state;
/*
* Wait for the other CPUs to be notified and be waiting for us:
*/
- while (kgdb_do_roundup && (atomic_read(&masters_in_kgdb) +
- atomic_read(&slaves_in_kgdb)) != online_cpus)
+ time_left = loops_per_jiffy * HZ;
+ while (kgdb_do_roundup && --time_left &&
+ (atomic_read(&masters_in_kgdb) + atomic_read(&slaves_in_kgdb)) !=
+ online_cpus)
cpu_relax();
+ if (!time_left)
+ pr_crit("KGDB: Timed out waiting for secondary CPUs.\n");
/*
* At this point the primary processor is completely
static void sysrq_handle_dbg(int key)
{
if (!dbg_io_ops) {
- printk(KERN_CRIT "ERROR: No KGDB I/O module available\n");
+ pr_crit("ERROR: No KGDB I/O module available\n");
return;
}
if (!kgdb_connected) {
#ifdef CONFIG_KGDB_KDB
if (!dbg_kdb_mode)
- printk(KERN_CRIT "KGDB or $3#33 for KDB\n");
+ pr_crit("KGDB or $3#33 for KDB\n");
#else
- printk(KERN_CRIT "Entering KGDB\n");
+ pr_crit("Entering KGDB\n");
#endif
}
{
kgdb_break_asap = 0;
- printk(KERN_CRIT "kgdb: Waiting for connection from remote gdb...\n");
+ pr_crit("Waiting for connection from remote gdb...\n");
kgdb_breakpoint();
}
if (dbg_io_ops) {
spin_unlock(&kgdb_registration_lock);
- printk(KERN_ERR "kgdb: Another I/O driver is already "
- "registered with KGDB.\n");
+ pr_err("Another I/O driver is already registered with KGDB\n");
return -EBUSY;
}
spin_unlock(&kgdb_registration_lock);
- printk(KERN_INFO "kgdb: Registered I/O driver %s.\n",
- new_dbg_io_ops->name);
+ pr_info("Registered I/O driver %s\n", new_dbg_io_ops->name);
/* Arm KGDB now. */
kgdb_register_callbacks();
spin_unlock(&kgdb_registration_lock);
- printk(KERN_INFO
- "kgdb: Unregistered I/O driver %s, debugger disabled.\n",
+ pr_info("Unregistered I/O driver %s, debugger disabled\n",
old_dbg_io_ops->name);
}
EXPORT_SYMBOL_GPL(kgdb_unregister_io_module);
for (i = 0, bp = kdb_breakpoints; i < KDB_MAXBPT; i++, bp++)
bp->bp_free = 1;
- kdb_register_repeat("bp", kdb_bp, "[<vaddr>]",
- "Set/Display breakpoints", 0, KDB_REPEAT_NO_ARGS);
- kdb_register_repeat("bl", kdb_bp, "[<vaddr>]",
- "Display breakpoints", 0, KDB_REPEAT_NO_ARGS);
+ kdb_register_flags("bp", kdb_bp, "[<vaddr>]",
+ "Set/Display breakpoints", 0,
+ KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS);
+ kdb_register_flags("bl", kdb_bp, "[<vaddr>]",
+ "Display breakpoints", 0,
+ KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS);
if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT)
- kdb_register_repeat("bph", kdb_bp, "[<vaddr>]",
- "[datar [length]|dataw [length]] Set hw brk", 0, KDB_REPEAT_NO_ARGS);
- kdb_register_repeat("bc", kdb_bc, "<bpnum>",
- "Clear Breakpoint", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("be", kdb_bc, "<bpnum>",
- "Enable Breakpoint", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("bd", kdb_bc, "<bpnum>",
- "Disable Breakpoint", 0, KDB_REPEAT_NONE);
-
- kdb_register_repeat("ss", kdb_ss, "",
- "Single Step", 1, KDB_REPEAT_NO_ARGS);
+ kdb_register_flags("bph", kdb_bp, "[<vaddr>]",
+ "[datar [length]|dataw [length]] Set hw brk", 0,
+ KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS);
+ kdb_register_flags("bc", kdb_bc, "<bpnum>",
+ "Clear Breakpoint", 0,
+ KDB_ENABLE_FLOW_CTRL);
+ kdb_register_flags("be", kdb_bc, "<bpnum>",
+ "Enable Breakpoint", 0,
+ KDB_ENABLE_FLOW_CTRL);
+ kdb_register_flags("bd", kdb_bc, "<bpnum>",
+ "Disable Breakpoint", 0,
+ KDB_ENABLE_FLOW_CTRL);
+
+ kdb_register_flags("ss", kdb_ss, "",
+ "Single Step", 1,
+ KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS);
/*
* Architecture dependent initialization.
*/
ks->pass_exception = 1;
KDB_FLAG_SET(CATASTROPHIC);
}
+ /* set CATASTROPHIC if the system contains unresponsive processors */
+ for_each_online_cpu(i)
+ if (!kgdb_info[i].enter_kgdb)
+ KDB_FLAG_SET(CATASTROPHIC);
if (KDB_STATE(SSBPT) && reason == KDB_REASON_SSTEP) {
KDB_STATE_CLEAR(SSBPT);
KDB_STATE_CLEAR(DOING_SS);
*/
#include <linux/ctype.h>
+#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/kmsg_dump.h>
#include <linux/vmalloc.h>
#include <linux/atomic.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/kallsyms.h>
#include <linux/slab.h>
#include "kdb_private.h"
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "kdb."
+
+static int kdb_cmd_enabled = CONFIG_KDB_DEFAULT_ENABLE;
+module_param_named(cmd_enable, kdb_cmd_enabled, int, 0600);
+
#define GREP_LEN 256
char kdb_grep_string[GREP_LEN];
int kdb_grepping_flag;
KDBMSG(BADLENGTH, "Invalid length field"),
KDBMSG(NOBP, "No Breakpoint exists"),
KDBMSG(BADADDR, "Invalid address"),
+ KDBMSG(NOPERM, "Permission denied"),
};
#undef KDBMSG
return p;
}
+/*
+ * Check whether the flags of the current command and the permissions
+ * of the kdb console has allow a command to be run.
+ */
+static inline bool kdb_check_flags(kdb_cmdflags_t flags, int permissions,
+ bool no_args)
+{
+ /* permissions comes from userspace so needs massaging slightly */
+ permissions &= KDB_ENABLE_MASK;
+ permissions |= KDB_ENABLE_ALWAYS_SAFE;
+
+ /* some commands change group when launched with no arguments */
+ if (no_args)
+ permissions |= permissions << KDB_ENABLE_NO_ARGS_SHIFT;
+
+ flags |= KDB_ENABLE_ALL;
+
+ return permissions & flags;
+}
+
/*
* kdbgetenv - This function will return the character string value of
* an environment variable.
char *cp;
kdb_symtab_t symtab;
+ /*
+ * If the enable flags prohibit both arbitrary memory access
+ * and flow control then there are no reasonable grounds to
+ * provide symbol lookup.
+ */
+ if (!kdb_check_flags(KDB_ENABLE_MEM_READ | KDB_ENABLE_FLOW_CTRL,
+ kdb_cmd_enabled, false))
+ return KDB_NOPERM;
+
/*
* Process arguments which follow the following syntax:
*
if (!s->count)
s->usable = 0;
if (s->usable)
- kdb_register(s->name, kdb_exec_defcmd,
- s->usage, s->help, 0);
+ /* macros are always safe because when executed each
+ * internal command re-enters kdb_parse() and is
+ * safety checked individually.
+ */
+ kdb_register_flags(s->name, kdb_exec_defcmd, s->usage,
+ s->help, 0,
+ KDB_ENABLE_ALWAYS_SAFE);
return 0;
}
if (!s->usable)
if (i < kdb_max_commands) {
int result;
+
+ if (!kdb_check_flags(tp->cmd_flags, kdb_cmd_enabled, argc <= 1))
+ return KDB_NOPERM;
+
KDB_STATE_SET(CMD);
result = (*tp->cmd_func)(argc-1, (const char **)argv);
if (result && ignore_errors && result > KDB_CMD_GO)
result = 0;
KDB_STATE_CLEAR(CMD);
- switch (tp->cmd_repeat) {
- case KDB_REPEAT_NONE:
- argc = 0;
- if (argv[0])
- *(argv[0]) = '\0';
- break;
- case KDB_REPEAT_NO_ARGS:
- argc = 1;
- if (argv[1])
- *(argv[1]) = '\0';
- break;
- case KDB_REPEAT_WITH_ARGS:
- break;
- }
+
+ if (tp->cmd_flags & KDB_REPEAT_WITH_ARGS)
+ return result;
+
+ argc = tp->cmd_flags & KDB_REPEAT_NO_ARGS ? 1 : 0;
+ if (argv[argc])
+ *(argv[argc]) = '\0';
return result;
}
*/
static int kdb_sr(int argc, const char **argv)
{
+ bool check_mask =
+ !kdb_check_flags(KDB_ENABLE_ALL, kdb_cmd_enabled, false);
+
if (argc != 1)
return KDB_ARGCOUNT;
+
kdb_trap_printk++;
- __handle_sysrq(*argv[1], false);
+ __handle_sysrq(*argv[1], check_mask);
kdb_trap_printk--;
return 0;
for (start_cpu = -1, i = 0; i < NR_CPUS; i++) {
if (!cpu_online(i)) {
state = 'F'; /* cpu is offline */
+ } else if (!kgdb_info[i].enter_kgdb) {
+ state = 'D'; /* cpu is online but unresponsive */
} else {
state = ' '; /* cpu is responding to kdb */
if (kdb_task_state_char(KDB_TSK(i)) == 'I')
/*
* Validate cpunum
*/
- if ((cpunum > NR_CPUS) || !cpu_online(cpunum))
+ if ((cpunum > NR_CPUS) || !kgdb_info[cpunum].enter_kgdb)
return KDB_BADCPUNUM;
dbg_switch_cpu = cpunum;
return 0;
if (!kt->cmd_name)
continue;
+ if (!kdb_check_flags(kt->cmd_flags, kdb_cmd_enabled, true))
+ continue;
if (strlen(kt->cmd_usage) > 20)
space = "\n ";
kdb_printf("%-15.15s %-20s%s%s\n", kt->cmd_name,
}
/*
- * kdb_register_repeat - This function is used to register a kernel
+ * kdb_register_flags - This function is used to register a kernel
* debugger command.
* Inputs:
* cmd Command name
* zero for success, one if a duplicate command.
*/
#define kdb_command_extend 50 /* arbitrary */
-int kdb_register_repeat(char *cmd,
- kdb_func_t func,
- char *usage,
- char *help,
- short minlen,
- kdb_repeat_t repeat)
+int kdb_register_flags(char *cmd,
+ kdb_func_t func,
+ char *usage,
+ char *help,
+ short minlen,
+ kdb_cmdflags_t flags)
{
int i;
kdbtab_t *kp;
kp->cmd_func = func;
kp->cmd_usage = usage;
kp->cmd_help = help;
- kp->cmd_flags = 0;
kp->cmd_minlen = minlen;
- kp->cmd_repeat = repeat;
+ kp->cmd_flags = flags;
return 0;
}
-EXPORT_SYMBOL_GPL(kdb_register_repeat);
+EXPORT_SYMBOL_GPL(kdb_register_flags);
/*
* kdb_register - Compatibility register function for commands that do
* not need to specify a repeat state. Equivalent to
- * kdb_register_repeat with KDB_REPEAT_NONE.
+ * kdb_register_flags with flags set to 0.
* Inputs:
* cmd Command name
* func Function to execute the command
char *help,
short minlen)
{
- return kdb_register_repeat(cmd, func, usage, help, minlen,
- KDB_REPEAT_NONE);
+ return kdb_register_flags(cmd, func, usage, help, minlen, 0);
}
EXPORT_SYMBOL_GPL(kdb_register);
for_each_kdbcmd(kp, i)
kp->cmd_name = NULL;
- kdb_register_repeat("md", kdb_md, "<vaddr>",
+ kdb_register_flags("md", kdb_md, "<vaddr>",
"Display Memory Contents, also mdWcN, e.g. md8c1", 1,
- KDB_REPEAT_NO_ARGS);
- kdb_register_repeat("mdr", kdb_md, "<vaddr> <bytes>",
- "Display Raw Memory", 0, KDB_REPEAT_NO_ARGS);
- kdb_register_repeat("mdp", kdb_md, "<paddr> <bytes>",
- "Display Physical Memory", 0, KDB_REPEAT_NO_ARGS);
- kdb_register_repeat("mds", kdb_md, "<vaddr>",
- "Display Memory Symbolically", 0, KDB_REPEAT_NO_ARGS);
- kdb_register_repeat("mm", kdb_mm, "<vaddr> <contents>",
- "Modify Memory Contents", 0, KDB_REPEAT_NO_ARGS);
- kdb_register_repeat("go", kdb_go, "[<vaddr>]",
- "Continue Execution", 1, KDB_REPEAT_NONE);
- kdb_register_repeat("rd", kdb_rd, "",
- "Display Registers", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("rm", kdb_rm, "<reg> <contents>",
- "Modify Registers", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("ef", kdb_ef, "<vaddr>",
- "Display exception frame", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("bt", kdb_bt, "[<vaddr>]",
- "Stack traceback", 1, KDB_REPEAT_NONE);
- kdb_register_repeat("btp", kdb_bt, "<pid>",
- "Display stack for process <pid>", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("bta", kdb_bt, "[D|R|S|T|C|Z|E|U|I|M|A]",
- "Backtrace all processes matching state flag", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("btc", kdb_bt, "",
- "Backtrace current process on each cpu", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("btt", kdb_bt, "<vaddr>",
+ KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS);
+ kdb_register_flags("mdr", kdb_md, "<vaddr> <bytes>",
+ "Display Raw Memory", 0,
+ KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS);
+ kdb_register_flags("mdp", kdb_md, "<paddr> <bytes>",
+ "Display Physical Memory", 0,
+ KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS);
+ kdb_register_flags("mds", kdb_md, "<vaddr>",
+ "Display Memory Symbolically", 0,
+ KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS);
+ kdb_register_flags("mm", kdb_mm, "<vaddr> <contents>",
+ "Modify Memory Contents", 0,
+ KDB_ENABLE_MEM_WRITE | KDB_REPEAT_NO_ARGS);
+ kdb_register_flags("go", kdb_go, "[<vaddr>]",
+ "Continue Execution", 1,
+ KDB_ENABLE_REG_WRITE | KDB_ENABLE_ALWAYS_SAFE_NO_ARGS);
+ kdb_register_flags("rd", kdb_rd, "",
+ "Display Registers", 0,
+ KDB_ENABLE_REG_READ);
+ kdb_register_flags("rm", kdb_rm, "<reg> <contents>",
+ "Modify Registers", 0,
+ KDB_ENABLE_REG_WRITE);
+ kdb_register_flags("ef", kdb_ef, "<vaddr>",
+ "Display exception frame", 0,
+ KDB_ENABLE_MEM_READ);
+ kdb_register_flags("bt", kdb_bt, "[<vaddr>]",
+ "Stack traceback", 1,
+ KDB_ENABLE_MEM_READ | KDB_ENABLE_INSPECT_NO_ARGS);
+ kdb_register_flags("btp", kdb_bt, "<pid>",
+ "Display stack for process <pid>", 0,
+ KDB_ENABLE_INSPECT);
+ kdb_register_flags("bta", kdb_bt, "[D|R|S|T|C|Z|E|U|I|M|A]",
+ "Backtrace all processes matching state flag", 0,
+ KDB_ENABLE_INSPECT);
+ kdb_register_flags("btc", kdb_bt, "",
+ "Backtrace current process on each cpu", 0,
+ KDB_ENABLE_INSPECT);
+ kdb_register_flags("btt", kdb_bt, "<vaddr>",
"Backtrace process given its struct task address", 0,
- KDB_REPEAT_NONE);
- kdb_register_repeat("env", kdb_env, "",
- "Show environment variables", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("set", kdb_set, "",
- "Set environment variables", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("help", kdb_help, "",
- "Display Help Message", 1, KDB_REPEAT_NONE);
- kdb_register_repeat("?", kdb_help, "",
- "Display Help Message", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("cpu", kdb_cpu, "<cpunum>",
- "Switch to new cpu", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("kgdb", kdb_kgdb, "",
- "Enter kgdb mode", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("ps", kdb_ps, "[<flags>|A]",
- "Display active task list", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("pid", kdb_pid, "<pidnum>",
- "Switch to another task", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("reboot", kdb_reboot, "",
- "Reboot the machine immediately", 0, KDB_REPEAT_NONE);
+ KDB_ENABLE_MEM_READ | KDB_ENABLE_INSPECT_NO_ARGS);
+ kdb_register_flags("env", kdb_env, "",
+ "Show environment variables", 0,
+ KDB_ENABLE_ALWAYS_SAFE);
+ kdb_register_flags("set", kdb_set, "",
+ "Set environment variables", 0,
+ KDB_ENABLE_ALWAYS_SAFE);
+ kdb_register_flags("help", kdb_help, "",
+ "Display Help Message", 1,
+ KDB_ENABLE_ALWAYS_SAFE);
+ kdb_register_flags("?", kdb_help, "",
+ "Display Help Message", 0,
+ KDB_ENABLE_ALWAYS_SAFE);
+ kdb_register_flags("cpu", kdb_cpu, "<cpunum>",
+ "Switch to new cpu", 0,
+ KDB_ENABLE_ALWAYS_SAFE_NO_ARGS);
+ kdb_register_flags("kgdb", kdb_kgdb, "",
+ "Enter kgdb mode", 0, 0);
+ kdb_register_flags("ps", kdb_ps, "[<flags>|A]",
+ "Display active task list", 0,
+ KDB_ENABLE_INSPECT);
+ kdb_register_flags("pid", kdb_pid, "<pidnum>",
+ "Switch to another task", 0,
+ KDB_ENABLE_INSPECT);
+ kdb_register_flags("reboot", kdb_reboot, "",
+ "Reboot the machine immediately", 0,
+ KDB_ENABLE_REBOOT);
#if defined(CONFIG_MODULES)
- kdb_register_repeat("lsmod", kdb_lsmod, "",
- "List loaded kernel modules", 0, KDB_REPEAT_NONE);
+ kdb_register_flags("lsmod", kdb_lsmod, "",
+ "List loaded kernel modules", 0,
+ KDB_ENABLE_INSPECT);
#endif
#if defined(CONFIG_MAGIC_SYSRQ)
- kdb_register_repeat("sr", kdb_sr, "<key>",
- "Magic SysRq key", 0, KDB_REPEAT_NONE);
+ kdb_register_flags("sr", kdb_sr, "<key>",
+ "Magic SysRq key", 0,
+ KDB_ENABLE_ALWAYS_SAFE);
#endif
#if defined(CONFIG_PRINTK)
- kdb_register_repeat("dmesg", kdb_dmesg, "[lines]",
- "Display syslog buffer", 0, KDB_REPEAT_NONE);
+ kdb_register_flags("dmesg", kdb_dmesg, "[lines]",
+ "Display syslog buffer", 0,
+ KDB_ENABLE_ALWAYS_SAFE);
#endif
if (arch_kgdb_ops.enable_nmi) {
- kdb_register_repeat("disable_nmi", kdb_disable_nmi, "",
- "Disable NMI entry to KDB", 0, KDB_REPEAT_NONE);
- }
- kdb_register_repeat("defcmd", kdb_defcmd, "name \"usage\" \"help\"",
- "Define a set of commands, down to endefcmd", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("kill", kdb_kill, "<-signal> <pid>",
- "Send a signal to a process", 0, KDB_REPEAT_NONE);
- kdb_register_repeat("summary", kdb_summary, "",
- "Summarize the system", 4, KDB_REPEAT_NONE);
- kdb_register_repeat("per_cpu", kdb_per_cpu, "<sym> [<bytes>] [<cpu>]",
- "Display per_cpu variables", 3, KDB_REPEAT_NONE);
- kdb_register_repeat("grephelp", kdb_grep_help, "",
- "Display help on | grep", 0, KDB_REPEAT_NONE);
+ kdb_register_flags("disable_nmi", kdb_disable_nmi, "",
+ "Disable NMI entry to KDB", 0,
+ KDB_ENABLE_ALWAYS_SAFE);
+ }
+ kdb_register_flags("defcmd", kdb_defcmd, "name \"usage\" \"help\"",
+ "Define a set of commands, down to endefcmd", 0,
+ KDB_ENABLE_ALWAYS_SAFE);
+ kdb_register_flags("kill", kdb_kill, "<-signal> <pid>",
+ "Send a signal to a process", 0,
+ KDB_ENABLE_SIGNAL);
+ kdb_register_flags("summary", kdb_summary, "",
+ "Summarize the system", 4,
+ KDB_ENABLE_ALWAYS_SAFE);
+ kdb_register_flags("per_cpu", kdb_per_cpu, "<sym> [<bytes>] [<cpu>]",
+ "Display per_cpu variables", 3,
+ KDB_ENABLE_MEM_READ);
+ kdb_register_flags("grephelp", kdb_grep_help, "",
+ "Display help on | grep", 0,
+ KDB_ENABLE_ALWAYS_SAFE);
}
/* Execute any commands defined in kdb_cmds. */
kdb_func_t cmd_func; /* Function to execute command */
char *cmd_usage; /* Usage String for this command */
char *cmd_help; /* Help message for this command */
- short cmd_flags; /* Parsing flags */
short cmd_minlen; /* Minimum legal # command
* chars required */
- kdb_repeat_t cmd_repeat; /* Does command auto repeat on enter? */
+ kdb_cmdflags_t cmd_flags; /* Command behaviour flags */
} kdbtab_t;
extern int kdb_bt(int, const char **); /* KDB display back trace */
}
static void perf_sample_regs_user(struct perf_regs *regs_user,
- struct pt_regs *regs)
+ struct pt_regs *regs,
+ struct pt_regs *regs_user_copy)
{
- if (!user_mode(regs)) {
- if (current->mm)
- regs = task_pt_regs(current);
- else
- regs = NULL;
- }
-
- if (regs) {
- regs_user->abi = perf_reg_abi(current);
+ if (user_mode(regs)) {
+ regs_user->abi = perf_reg_abi(current);
regs_user->regs = regs;
+ } else if (current->mm) {
+ perf_get_regs_user(regs_user, regs, regs_user_copy);
} else {
regs_user->abi = PERF_SAMPLE_REGS_ABI_NONE;
regs_user->regs = NULL;
}
if (sample_type & (PERF_SAMPLE_REGS_USER | PERF_SAMPLE_STACK_USER))
- perf_sample_regs_user(&data->regs_user, regs);
+ perf_sample_regs_user(&data->regs_user, regs,
+ &data->regs_user_copy);
if (sample_type & PERF_SAMPLE_REGS_USER) {
/* regs dump ABI info */
static int wait_consider_task(struct wait_opts *wo, int ptrace,
struct task_struct *p)
{
+ /*
+ * We can race with wait_task_zombie() from another thread.
+ * Ensure that EXIT_ZOMBIE -> EXIT_DEAD/EXIT_TRACE transition
+ * can't confuse the checks below.
+ */
+ int exit_state = ACCESS_ONCE(p->exit_state);
int ret;
- if (unlikely(p->exit_state == EXIT_DEAD))
+ if (unlikely(exit_state == EXIT_DEAD))
return 0;
ret = eligible_child(wo, p);
return 0;
}
- if (unlikely(p->exit_state == EXIT_TRACE)) {
+ if (unlikely(exit_state == EXIT_TRACE)) {
/*
* ptrace == 0 means we are the natural parent. In this case
* we should clear notask_error, debugger will notify us.
}
/* slay zombie? */
- if (p->exit_state == EXIT_ZOMBIE) {
+ if (exit_state == EXIT_ZOMBIE) {
/* we don't reap group leaders with subthreads */
if (!delay_group_leader(p)) {
/*
DEBUG_LOCKS_WARN_ON(lock->owner != current);
DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next);
- mutex_clear_owner(lock);
}
/*
* __mutex_slowpath_needs_to_unlock() is explicitly 0 for debug
* mutexes so that we can do it here after we've verified state.
*/
+ mutex_clear_owner(lock);
atomic_set(&lock->count, 1);
}
#endif
#ifdef CONFIG_RT_GROUP_SCHED
alloc_size += 2 * nr_cpu_ids * sizeof(void **);
-#endif
-#ifdef CONFIG_CPUMASK_OFFSTACK
- alloc_size += num_possible_cpus() * cpumask_size();
#endif
if (alloc_size) {
ptr = (unsigned long)kzalloc(alloc_size, GFP_NOWAIT);
ptr += nr_cpu_ids * sizeof(void **);
#endif /* CONFIG_RT_GROUP_SCHED */
+ }
#ifdef CONFIG_CPUMASK_OFFSTACK
- for_each_possible_cpu(i) {
- per_cpu(load_balance_mask, i) = (void *)ptr;
- ptr += cpumask_size();
- }
-#endif /* CONFIG_CPUMASK_OFFSTACK */
+ for_each_possible_cpu(i) {
+ per_cpu(load_balance_mask, i) = (cpumask_var_t)kzalloc_node(
+ cpumask_size(), GFP_KERNEL, cpu_to_node(i));
}
+#endif /* CONFIG_CPUMASK_OFFSTACK */
init_rt_bandwidth(&def_rt_bandwidth,
global_rt_period(), global_rt_runtime());
static
int dl_runtime_exceeded(struct rq *rq, struct sched_dl_entity *dl_se)
{
- int dmiss = dl_time_before(dl_se->deadline, rq_clock(rq));
- int rorun = dl_se->runtime <= 0;
-
- if (!rorun && !dmiss)
- return 0;
-
- /*
- * If we are beyond our current deadline and we are still
- * executing, then we have already used some of the runtime of
- * the next instance. Thus, if we do not account that, we are
- * stealing bandwidth from the system at each deadline miss!
- */
- if (dmiss) {
- dl_se->runtime = rorun ? dl_se->runtime : 0;
- dl_se->runtime -= rq_clock(rq) - dl_se->deadline;
- }
-
- return 1;
+ return (dl_se->runtime <= 0);
}
extern bool sched_rt_bandwidth_account(struct rt_rq *rt_rq);
* parameters of the task might need updating. Otherwise,
* we want a replenishment of its runtime.
*/
- if (!dl_se->dl_new && flags & ENQUEUE_REPLENISH)
- replenish_dl_entity(dl_se, pi_se);
- else
+ if (dl_se->dl_new || flags & ENQUEUE_WAKEUP)
update_dl_entity(dl_se, pi_se);
+ else if (flags & ENQUEUE_REPLENISH)
+ replenish_dl_entity(dl_se, pi_se);
__enqueue_dl_entity(dl_se);
}
static void destroy_cfs_bandwidth(struct cfs_bandwidth *cfs_b)
{
+ /* init_cfs_bandwidth() was not called */
+ if (!cfs_b->throttled_cfs_rq.next)
+ return;
+
hrtimer_cancel(&cfs_b->period_timer);
hrtimer_cancel(&cfs_b->slack_timer);
}
* wl = S * s'_i; see (2)
*/
if (W > 0 && w < W)
- wl = (w * tg->shares) / W;
+ wl = (w * (long)tg->shares) / W;
else
wl = tg->shares;
static __init int kdb_ftrace_register(void)
{
- kdb_register_repeat("ftdump", kdb_ftdump, "[skip_#lines] [cpu]",
- "Dump ftrace log", 0, KDB_REPEAT_NONE);
+ kdb_register_flags("ftdump", kdb_ftdump, "[skip_#lines] [cpu]",
+ "Dump ftrace log", 0, KDB_ENABLE_ALWAYS_SAFE);
return 0;
}
help
KDB frontend for kernel
+config KDB_DEFAULT_ENABLE
+ hex "KDB: Select kdb command functions to be enabled by default"
+ depends on KGDB_KDB
+ default 0x1
+ help
+ Specifiers which kdb commands are enabled by default. This may
+ be set to 1 or 0 to enable all commands or disable almost all
+ commands.
+
+ Alternatively the following bitmask applies:
+
+ 0x0002 - allow arbitrary reads from memory and symbol lookup
+ 0x0004 - allow arbitrary writes to memory
+ 0x0008 - allow current register state to be inspected
+ 0x0010 - allow current register state to be modified
+ 0x0020 - allow passive inspection (backtrace, process list, lsmod)
+ 0x0040 - allow flow control management (breakpoint, single step)
+ 0x0080 - enable signalling of processes
+ 0x0100 - allow machine to be rebooted
+
+ The config option merely sets the default at boot time. Both
+ issuing 'echo X > /sys/module/kdb/parameters/cmd_enable' or
+ setting with kdb.cmd_enable=X kernel command line option will
+ override the default settings.
+
config KDB_KEYBOARD
bool "KGDB_KDB: keyboard as input device"
depends on VT && KGDB_KDB
* 2 of the Licence, or (at your option) any later version.
*/
//#define DEBUG
+#include <linux/rcupdate.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/assoc_array_priv.h>
depends on !KMEMCHECK
select PAGE_EXTENSION
select PAGE_POISONING if !ARCH_SUPPORTS_DEBUG_PAGEALLOC
- select PAGE_GUARD if ARCH_SUPPORTS_DEBUG_PAGEALLOC
---help---
Unmap pages from the kernel linear mapping after free_pages().
This results in a large slowdown, but helps to find certain types
that would result in incorrect warnings of memory corruption after
a resume because free pages are not saved to the suspend image.
-config WANT_PAGE_DEBUG_FLAGS
- bool
-
config PAGE_POISONING
bool
- select WANT_PAGE_DEBUG_FLAGS
-
-config PAGE_GUARD
- bool
- select WANT_PAGE_DEBUG_FLAGS
* @mapping: the address_space to search
* @offset: the page index
* @fgp_flags: PCG flags
- * @cache_gfp_mask: gfp mask to use for the page cache data page allocation
- * @radix_gfp_mask: gfp mask to use for radix tree node allocation
+ * @gfp_mask: gfp mask to use for the page cache data page allocation
*
* Looks up the page cache slot at @mapping & @offset.
*
* FGP_ACCESSED: the page will be marked accessed
* FGP_LOCK: Page is return locked
* FGP_CREAT: If page is not present then a new page is allocated using
- * @cache_gfp_mask and added to the page cache and the VM's LRU
- * list. If radix tree nodes are allocated during page cache
- * insertion then @radix_gfp_mask is used. The page is returned
- * locked and with an increased refcount. Otherwise, %NULL is
- * returned.
+ * @gfp_mask and added to the page cache and the VM's LRU
+ * list. The page is returned locked and with an increased
+ * refcount. Otherwise, %NULL is returned.
*
* If FGP_LOCK or FGP_CREAT are specified then the function may sleep even
* if the GFP flags specified for FGP_CREAT are atomic.
* If there is a page cache page, it is returned with an increased refcount.
*/
struct page *pagecache_get_page(struct address_space *mapping, pgoff_t offset,
- int fgp_flags, gfp_t cache_gfp_mask, gfp_t radix_gfp_mask)
+ int fgp_flags, gfp_t gfp_mask)
{
struct page *page;
if (!page && (fgp_flags & FGP_CREAT)) {
int err;
if ((fgp_flags & FGP_WRITE) && mapping_cap_account_dirty(mapping))
- cache_gfp_mask |= __GFP_WRITE;
- if (fgp_flags & FGP_NOFS) {
- cache_gfp_mask &= ~__GFP_FS;
- radix_gfp_mask &= ~__GFP_FS;
- }
+ gfp_mask |= __GFP_WRITE;
+ if (fgp_flags & FGP_NOFS)
+ gfp_mask &= ~__GFP_FS;
- page = __page_cache_alloc(cache_gfp_mask);
+ page = __page_cache_alloc(gfp_mask);
if (!page)
return NULL;
if (fgp_flags & FGP_ACCESSED)
__SetPageReferenced(page);
- err = add_to_page_cache_lru(page, mapping, offset, radix_gfp_mask);
+ err = add_to_page_cache_lru(page, mapping, offset,
+ gfp_mask & GFP_RECLAIM_MASK);
if (unlikely(err)) {
page_cache_release(page);
page = NULL;
fgp_flags |= FGP_NOFS;
page = pagecache_get_page(mapping, index, fgp_flags,
- mapping_gfp_mask(mapping),
- GFP_KERNEL);
+ mapping_gfp_mask(mapping));
if (page)
wait_for_stable_page(page);
if (swap_cgroup_cmpxchg(entry, old_id, new_id) == old_id) {
mem_cgroup_swap_statistics(from, false);
mem_cgroup_swap_statistics(to, true);
- /*
- * This function is only called from task migration context now.
- * It postpones page_counter and refcount handling till the end
- * of task migration(mem_cgroup_clear_mc()) for performance
- * improvement. But we cannot postpone css_get(to) because if
- * the process that has been moved to @to does swap-in, the
- * refcount of @to might be decreased to 0.
- *
- * We are in attach() phase, so the cgroup is guaranteed to be
- * alive, so we can just call css_get().
- */
- css_get(&to->css);
return 0;
}
return -EINVAL;
if (parent_css == NULL) {
root_mem_cgroup = memcg;
page_counter_init(&memcg->memory, NULL);
+ memcg->soft_limit = PAGE_COUNTER_MAX;
page_counter_init(&memcg->memsw, NULL);
page_counter_init(&memcg->kmem, NULL);
}
if (parent->use_hierarchy) {
page_counter_init(&memcg->memory, &parent->memory);
+ memcg->soft_limit = PAGE_COUNTER_MAX;
page_counter_init(&memcg->memsw, &parent->memsw);
page_counter_init(&memcg->kmem, &parent->kmem);
*/
} else {
page_counter_init(&memcg->memory, NULL);
+ memcg->soft_limit = PAGE_COUNTER_MAX;
page_counter_init(&memcg->memsw, NULL);
page_counter_init(&memcg->kmem, NULL);
/*
mem_cgroup_resize_limit(memcg, PAGE_COUNTER_MAX);
mem_cgroup_resize_memsw_limit(memcg, PAGE_COUNTER_MAX);
memcg_update_kmem_limit(memcg, PAGE_COUNTER_MAX);
- memcg->soft_limit = 0;
+ memcg->soft_limit = PAGE_COUNTER_MAX;
}
#ifdef CONFIG_MMU
if (!dirty_page)
return ret;
- /*
- * Yes, Virginia, this is actually required to prevent a race
- * with clear_page_dirty_for_io() from clearing the page dirty
- * bit after it clear all dirty ptes, but before a racing
- * do_wp_page installs a dirty pte.
- *
- * do_shared_fault is protected similarly.
- */
if (!page_mkwrite) {
- wait_on_page_locked(dirty_page);
- set_page_dirty_balance(dirty_page);
+ struct address_space *mapping;
+ int dirtied;
+
+ lock_page(dirty_page);
+ dirtied = set_page_dirty(dirty_page);
+ VM_BUG_ON_PAGE(PageAnon(dirty_page), dirty_page);
+ mapping = dirty_page->mapping;
+ unlock_page(dirty_page);
+
+ if (dirtied && mapping) {
+ /*
+ * Some device drivers do not set page.mapping
+ * but still dirty their pages
+ */
+ balance_dirty_pages_ratelimited(mapping);
+ }
+
/* file_update_time outside page_lock */
if (vma->vm_file)
file_update_time(vma->vm_file);
details.last_index = ULONG_MAX;
- i_mmap_lock_read(mapping);
+ i_mmap_lock_write(mapping);
if (unlikely(!RB_EMPTY_ROOT(&mapping->i_mmap)))
unmap_mapping_range_tree(&mapping->i_mmap, &details);
if (unlikely(!list_empty(&mapping->i_mmap_nonlinear)))
unmap_mapping_range_list(&mapping->i_mmap_nonlinear, &details);
- i_mmap_unlock_read(mapping);
+ i_mmap_unlock_write(mapping);
}
EXPORT_SYMBOL(unmap_mapping_range);
if (prev && prev->vm_end == address)
return prev->vm_flags & VM_GROWSDOWN ? 0 : -ENOMEM;
- expand_downwards(vma, address - PAGE_SIZE);
+ return expand_downwards(vma, address - PAGE_SIZE);
}
if ((vma->vm_flags & VM_GROWSUP) && address + PAGE_SIZE == vma->vm_end) {
struct vm_area_struct *next = vma->vm_next;
if (next && next->vm_start == address + PAGE_SIZE)
return next->vm_flags & VM_GROWSUP ? 0 : -ENOMEM;
- expand_upwards(vma, address + PAGE_SIZE);
+ return expand_upwards(vma, address + PAGE_SIZE);
}
return 0;
}
if (exporter && exporter->anon_vma && !importer->anon_vma) {
int error;
+ importer->anon_vma = exporter->anon_vma;
error = anon_vma_clone(importer, exporter);
- if (error)
+ if (error) {
+ importer->anon_vma = NULL;
return error;
- importer->anon_vma = exporter->anon_vma;
+ }
}
}
{
struct mm_struct *mm = vma->vm_mm;
struct rlimit *rlim = current->signal->rlim;
- unsigned long new_start;
+ unsigned long new_start, actual_size;
/* address space limit tests */
if (!may_expand_vm(mm, grow))
return -ENOMEM;
/* Stack limit test */
- if (size > ACCESS_ONCE(rlim[RLIMIT_STACK].rlim_cur))
+ actual_size = size;
+ if (size && (vma->vm_flags & (VM_GROWSUP | VM_GROWSDOWN)))
+ actual_size -= PAGE_SIZE;
+ if (actual_size > ACCESS_ONCE(rlim[RLIMIT_STACK].rlim_cur))
return -ENOMEM;
/* mlock limit tests */
bdi_start_background_writeback(bdi);
}
-void set_page_dirty_balance(struct page *page)
-{
- if (set_page_dirty(page)) {
- struct address_space *mapping = page_mapping(page);
-
- if (mapping)
- balance_dirty_pages_ratelimited(mapping);
- }
-}
-
static DEFINE_PER_CPU(int, bdp_ratelimits);
/*
* page dirty in that case, but not all the buffers. This is a "bottom-up"
* dirtying, whereas __set_page_dirty_buffers() is a "top-down" dirtying.
*
- * Most callers have locked the page, which pins the address_space in memory.
- * But zap_pte_range() does not lock the page, however in that case the
- * mapping is pinned by the vma's ->vm_file reference.
- *
- * We take care to handle the case where the page was truncated from the
- * mapping by re-checking page_mapping() inside tree_lock.
+ * The caller must ensure this doesn't race with truncation. Most will simply
+ * hold the page lock, but e.g. zap_pte_range() calls with the page mapped and
+ * the pte lock held, which also locks out truncation.
*/
int __set_page_dirty_nobuffers(struct page *page)
{
if (!TestSetPageDirty(page)) {
struct address_space *mapping = page_mapping(page);
- struct address_space *mapping2;
unsigned long flags;
if (!mapping)
return 1;
spin_lock_irqsave(&mapping->tree_lock, flags);
- mapping2 = page_mapping(page);
- if (mapping2) { /* Race with truncate? */
- BUG_ON(mapping2 != mapping);
- WARN_ON_ONCE(!PagePrivate(page) && !PageUptodate(page));
- account_page_dirtied(page, mapping);
- radix_tree_tag_set(&mapping->page_tree,
- page_index(page), PAGECACHE_TAG_DIRTY);
- }
+ BUG_ON(page_mapping(page) != mapping);
+ WARN_ON_ONCE(!PagePrivate(page) && !PageUptodate(page));
+ account_page_dirtied(page, mapping);
+ radix_tree_tag_set(&mapping->page_tree, page_index(page),
+ PAGECACHE_TAG_DIRTY);
spin_unlock_irqrestore(&mapping->tree_lock, flags);
if (mapping->host) {
/* !PageAnon && !swapper_space */
/*
* We carefully synchronise fault handlers against
* installing a dirty pte and marking the page dirty
- * at this point. We do this by having them hold the
- * page lock at some point after installing their
- * pte, but before marking the page dirty.
- * Pages are always locked coming in here, so we get
- * the desired exclusion. See mm/memory.c:do_wp_page()
- * for more comments.
+ * at this point. We do this by having them hold the
+ * page lock while dirtying the page, and pages are
+ * always locked coming in here, so we get the desired
+ * exclusion.
*/
if (TestClearPageDirty(page)) {
dec_zone_page_state(page, NR_FILE_DIRTY);
anon_vma = kmem_cache_alloc(anon_vma_cachep, GFP_KERNEL);
if (anon_vma) {
atomic_set(&anon_vma->refcount, 1);
+ anon_vma->degree = 1; /* Reference for first vma */
+ anon_vma->parent = anon_vma;
/*
* Initialise the anon_vma root to point to itself. If called
* from fork, the root will be reset to the parents anon_vma.
if (likely(!vma->anon_vma)) {
vma->anon_vma = anon_vma;
anon_vma_chain_link(vma, avc, anon_vma);
+ /* vma reference or self-parent link for new root */
+ anon_vma->degree++;
allocated = NULL;
avc = NULL;
}
/*
* Attach the anon_vmas from src to dst.
* Returns 0 on success, -ENOMEM on failure.
+ *
+ * If dst->anon_vma is NULL this function tries to find and reuse existing
+ * anon_vma which has no vmas and only one child anon_vma. This prevents
+ * degradation of anon_vma hierarchy to endless linear chain in case of
+ * constantly forking task. On the other hand, an anon_vma with more than one
+ * child isn't reused even if there was no alive vma, thus rmap walker has a
+ * good chance of avoiding scanning the whole hierarchy when it searches where
+ * page is mapped.
*/
int anon_vma_clone(struct vm_area_struct *dst, struct vm_area_struct *src)
{
anon_vma = pavc->anon_vma;
root = lock_anon_vma_root(root, anon_vma);
anon_vma_chain_link(dst, avc, anon_vma);
+
+ /*
+ * Reuse existing anon_vma if its degree lower than two,
+ * that means it has no vma and only one anon_vma child.
+ *
+ * Do not chose parent anon_vma, otherwise first child
+ * will always reuse it. Root anon_vma is never reused:
+ * it has self-parent reference and at least one child.
+ */
+ if (!dst->anon_vma && anon_vma != src->anon_vma &&
+ anon_vma->degree < 2)
+ dst->anon_vma = anon_vma;
}
+ if (dst->anon_vma)
+ dst->anon_vma->degree++;
unlock_anon_vma_root(root);
return 0;
if (!pvma->anon_vma)
return 0;
+ /* Drop inherited anon_vma, we'll reuse existing or allocate new. */
+ vma->anon_vma = NULL;
+
/*
* First, attach the new VMA to the parent VMA's anon_vmas,
* so rmap can find non-COWed pages in child processes.
if (error)
return error;
+ /* An existing anon_vma has been reused, all done then. */
+ if (vma->anon_vma)
+ return 0;
+
/* Then add our own anon_vma. */
anon_vma = anon_vma_alloc();
if (!anon_vma)
* lock any of the anon_vmas in this anon_vma tree.
*/
anon_vma->root = pvma->anon_vma->root;
+ anon_vma->parent = pvma->anon_vma;
/*
* With refcounts, an anon_vma can stay around longer than the
* process it belongs to. The root anon_vma needs to be pinned until
vma->anon_vma = anon_vma;
anon_vma_lock_write(anon_vma);
anon_vma_chain_link(vma, avc, anon_vma);
+ anon_vma->parent->degree++;
anon_vma_unlock_write(anon_vma);
return 0;
* Leave empty anon_vmas on the list - we'll need
* to free them outside the lock.
*/
- if (RB_EMPTY_ROOT(&anon_vma->rb_root))
+ if (RB_EMPTY_ROOT(&anon_vma->rb_root)) {
+ anon_vma->parent->degree--;
continue;
+ }
list_del(&avc->same_vma);
anon_vma_chain_free(avc);
}
+ if (vma->anon_vma)
+ vma->anon_vma->degree--;
unlock_anon_vma_root(root);
/*
list_for_each_entry_safe(avc, next, &vma->anon_vma_chain, same_vma) {
struct anon_vma *anon_vma = avc->anon_vma;
+ BUG_ON(anon_vma->degree);
put_anon_vma(anon_vma);
list_del(&avc->same_vma);
return false;
/*
- * There is a potential race between when kswapd checks its watermarks
- * and a process gets throttled. There is also a potential race if
- * processes get throttled, kswapd wakes, a large process exits therby
- * balancing the zones that causes kswapd to miss a wakeup. If kswapd
- * is going to sleep, no process should be sleeping on pfmemalloc_wait
- * so wake them now if necessary. If necessary, processes will wake
- * kswapd and get throttled again
+ * The throttled processes are normally woken up in balance_pgdat() as
+ * soon as pfmemalloc_watermark_ok() is true. But there is a potential
+ * race between when kswapd checks the watermarks and a process gets
+ * throttled. There is also a potential race if processes get
+ * throttled, kswapd wakes, a large process exits thereby balancing the
+ * zones, which causes kswapd to exit balance_pgdat() before reaching
+ * the wake up checks. If kswapd is going to sleep, no process should
+ * be sleeping on pfmemalloc_wait, so wake them now if necessary. If
+ * the wake up is premature, processes will wake kswapd and get
+ * throttled again. The difference from wake ups in balance_pgdat() is
+ * that here we are under prepare_to_wait().
*/
- if (waitqueue_active(&pgdat->pfmemalloc_wait)) {
- wake_up(&pgdat->pfmemalloc_wait);
- return false;
- }
+ if (waitqueue_active(&pgdat->pfmemalloc_wait))
+ wake_up_all(&pgdat->pfmemalloc_wait);
return pgdat_balanced(pgdat, order, classzone_idx);
}
kfree(entry);
/* Make room for the rest of the fragments. */
- if (pskb_expand_head(skb_out, 0, size - skb->len, GFP_ATOMIC) < 0) {
+ if (pskb_expand_head(skb_out, 0, size - skb_out->len, GFP_ATOMIC) < 0) {
kfree_skb(skb_out);
skb_out = NULL;
goto free;
* fragments larger than BATADV_FRAG_MAX_FRAG_SIZE
*/
mtu = min_t(unsigned, mtu, BATADV_FRAG_MAX_FRAG_SIZE);
- max_fragment_size = (mtu - header_size - ETH_HLEN);
+ max_fragment_size = mtu - header_size;
max_packet_size = max_fragment_size * BATADV_FRAG_MAX_FRAGMENTS;
/* Don't even try to fragment, if we need more than 16 fragments */
goto out;
gw_node = batadv_gw_node_get(bat_priv, orig_dst_node);
- if (!gw_node->bandwidth_down == 0)
+ if (!gw_node)
goto out;
switch (atomic_read(&bat_priv->gw_mode)) {
if (orig_initialized)
atomic_dec(&bat_priv->mcast.num_disabled);
orig->capabilities |= BATADV_ORIG_CAPA_HAS_MCAST;
- /* If mcast support is being switched off increase the disabled
- * mcast node counter.
+ /* If mcast support is being switched off or if this is an initial
+ * OGM without mcast support then increase the disabled mcast
+ * node counter.
*/
} else if (!orig_mcast_enabled &&
- orig->capabilities & BATADV_ORIG_CAPA_HAS_MCAST) {
+ (orig->capabilities & BATADV_ORIG_CAPA_HAS_MCAST ||
+ !orig_initialized)) {
atomic_inc(&bat_priv->mcast.num_disabled);
orig->capabilities &= ~BATADV_ORIG_CAPA_HAS_MCAST;
}
{
struct batadv_priv *bat_priv = orig->bat_priv;
- if (!(orig->capabilities & BATADV_ORIG_CAPA_HAS_MCAST))
+ if (!(orig->capabilities & BATADV_ORIG_CAPA_HAS_MCAST) &&
+ orig->capa_initialized & BATADV_ORIG_CAPA_HAS_MCAST)
atomic_dec(&bat_priv->mcast.num_disabled);
batadv_mcast_want_unsnoop_update(bat_priv, orig, BATADV_NO_FLAGS);
if (!bat_priv->nc.decoding_hash)
goto err;
- batadv_hash_set_lock_class(bat_priv->nc.coding_hash,
+ batadv_hash_set_lock_class(bat_priv->nc.decoding_hash,
&batadv_nc_decoding_hash_lock_class_key);
INIT_DELAYED_WORK(&bat_priv->nc.work, batadv_nc_worker);
batadv_frag_purge_orig(orig_node, NULL);
- batadv_tt_global_del_orig(orig_node->bat_priv, orig_node, -1,
- "originator timed out");
-
if (orig_node->bat_priv->bat_algo_ops->bat_orig_free)
orig_node->bat_priv->bat_algo_ops->bat_orig_free(orig_node);
atomic_set(&orig_node->last_ttvn, 0);
orig_node->tt_buff = NULL;
orig_node->tt_buff_len = 0;
+ orig_node->last_seen = jiffies;
reset_time = jiffies - 1 - msecs_to_jiffies(BATADV_RESET_PROTECTION_MS);
orig_node->bcast_seqno_reset = reset_time;
#ifdef CONFIG_BATMAN_ADV_MCAST
if (batadv_purge_orig_node(bat_priv, orig_node)) {
batadv_gw_node_delete(bat_priv, orig_node);
hlist_del_rcu(&orig_node->hash_entry);
+ batadv_tt_global_del_orig(orig_node->bat_priv,
+ orig_node, -1,
+ "originator timed out");
batadv_orig_node_free_ref(orig_node);
continue;
}
router = batadv_orig_router_get(orig_node, recv_if);
+ if (!router)
+ return router;
+
/* only consider bonding for recv_if == BATADV_IF_DEFAULT (first hop)
* and if activated.
*/
- if (recv_if == BATADV_IF_DEFAULT || !atomic_read(&bat_priv->bonding) ||
- !router)
+ if (!(recv_if == BATADV_IF_DEFAULT && atomic_read(&bat_priv->bonding)))
return router;
/* bonding: loop through the list of possible routers found
drop:
dev->stats.rx_dropped++;
- kfree_skb(skb);
return NET_RX_DROP;
}
BT_DBG("");
+ if (!l2cap_is_socket(sock))
+ return -EBADFD;
+
baswap((void *) dst, &l2cap_pi(sock->sk)->chan->dst);
baswap((void *) src, &l2cap_pi(sock->sk)->chan->src);
BT_DBG("");
+ if (!l2cap_is_socket(sock))
+ return -EBADFD;
+
session = kzalloc(sizeof(struct cmtp_session), GFP_KERNEL);
if (!session)
return -ENOMEM;
if (rp->status)
return;
- if (test_bit(HCI_SETUP, &hdev->dev_flags))
+ if (test_bit(HCI_SETUP, &hdev->dev_flags) ||
+ test_bit(HCI_CONFIG, &hdev->dev_flags))
memcpy(hdev->dev_name, rp->name, HCI_MAX_NAME_LENGTH);
}
if (rp->status)
return;
- if (test_bit(HCI_SETUP, &hdev->dev_flags)) {
+ if (test_bit(HCI_SETUP, &hdev->dev_flags) ||
+ test_bit(HCI_CONFIG, &hdev->dev_flags)) {
hdev->hci_ver = rp->hci_ver;
hdev->hci_rev = __le16_to_cpu(rp->hci_rev);
hdev->lmp_ver = rp->lmp_ver;
if (rp->status)
return;
- if (test_bit(HCI_SETUP, &hdev->dev_flags))
+ if (test_bit(HCI_SETUP, &hdev->dev_flags) ||
+ test_bit(HCI_CONFIG, &hdev->dev_flags))
memcpy(hdev->commands, rp->commands, sizeof(hdev->commands));
}
return;
}
- if (!test_bit(HCI_CONNECTABLE, &hdev->dev_flags) &&
+ /* Require HCI_CONNECTABLE or a whitelist entry to accept the
+ * connection. These features are only touched through mgmt so
+ * only do the checks if HCI_MGMT is set.
+ */
+ if (test_bit(HCI_MGMT, &hdev->dev_flags) &&
+ !test_bit(HCI_CONNECTABLE, &hdev->dev_flags) &&
!hci_bdaddr_list_lookup(&hdev->whitelist, &ev->bdaddr,
BDADDR_BREDR)) {
hci_reject_conn(hdev, &ev->bdaddr);
{
struct hidp_session *session;
struct l2cap_conn *conn;
- struct l2cap_chan *chan = l2cap_pi(ctrl_sock->sk)->chan;
+ struct l2cap_chan *chan;
int ret;
ret = hidp_verify_sockets(ctrl_sock, intr_sock);
if (ret)
return ret;
+ chan = l2cap_pi(ctrl_sock->sk)->chan;
conn = NULL;
l2cap_chan_lock(chan);
if (chan->conn)
int ret;
char tmp_enc[40];
__le32 tmp[5] = {
- 16u, msg->hdr.crc, msg->footer.front_crc,
+ cpu_to_le32(16), msg->hdr.crc, msg->footer.front_crc,
msg->footer.middle_crc, msg->footer.data_crc,
};
ret = ceph_x_encrypt(&au->session_key, &tmp, sizeof(tmp),
if (src_len != sizeof(u32) + dst_len)
return -EINVAL;
- buf_len = le32_to_cpu(*(u32 *)src);
+ buf_len = le32_to_cpu(*(__le32 *)src);
if (buf_len != dst_len)
return -EINVAL;
skb_scrub_packet(skb, true);
skb->protocol = eth_type_trans(skb, dev);
+ skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN);
return 0;
}
/* If MPLS offload request, verify we are testing hardware MPLS features
* instead of standard features for the netdev.
*/
-#ifdef CONFIG_NET_MPLS_GSO
+#if IS_ENABLED(CONFIG_NET_MPLS_GSO)
static netdev_features_t net_mpls_features(struct sk_buff *skb,
netdev_features_t features,
__be16 type)
netdev_features_t netif_skb_features(struct sk_buff *skb)
{
- const struct net_device *dev = skb->dev;
+ struct net_device *dev = skb->dev;
netdev_features_t features = dev->features;
u16 gso_segs = skb_shinfo(skb)->gso_segs;
__be16 protocol = skb->protocol;
if (gso_segs > dev->gso_max_segs || gso_segs < dev->gso_min_segs)
features &= ~NETIF_F_GSO_MASK;
- if (protocol == htons(ETH_P_8021Q) || protocol == htons(ETH_P_8021AD)) {
- struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
- protocol = veh->h_vlan_encapsulated_proto;
- } else if (!vlan_tx_tag_present(skb)) {
- return harmonize_features(skb, features);
+ /* If encapsulation offload request, verify we are testing
+ * hardware encapsulation features instead of standard
+ * features for the netdev
+ */
+ if (skb->encapsulation)
+ features &= dev->hw_enc_features;
+
+ if (!vlan_tx_tag_present(skb)) {
+ if (unlikely(protocol == htons(ETH_P_8021Q) ||
+ protocol == htons(ETH_P_8021AD))) {
+ struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
+ protocol = veh->h_vlan_encapsulated_proto;
+ } else {
+ goto finalize;
+ }
}
features = netdev_intersect_features(features,
NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_STAG_TX);
+finalize:
+ if (dev->netdev_ops->ndo_features_check)
+ features &= dev->netdev_ops->ndo_features_check(skb, dev,
+ features);
+
return harmonize_features(skb, features);
}
EXPORT_SYMBOL(netif_skb_features);
if (unlikely(!skb))
goto out_null;
- /* If encapsulation offload request, verify we are testing
- * hardware encapsulation features instead of standard
- * features for the netdev
- */
- if (skb->encapsulation)
- features &= dev->hw_enc_features;
-
if (netif_needs_gso(dev, skb, features)) {
struct sk_buff *segs;
segs = skb_gso_segment(skb, features);
if (IS_ERR(segs)) {
- segs = NULL;
+ goto out_kfree_skb;
} else if (segs) {
consume_skb(skb);
skb = segs;
}
EXPORT_SYMBOL(netif_napi_del);
+static int napi_poll(struct napi_struct *n, struct list_head *repoll)
+{
+ void *have;
+ int work, weight;
+
+ list_del_init(&n->poll_list);
+
+ have = netpoll_poll_lock(n);
+
+ weight = n->weight;
+
+ /* This NAPI_STATE_SCHED test is for avoiding a race
+ * with netpoll's poll_napi(). Only the entity which
+ * obtains the lock and sees NAPI_STATE_SCHED set will
+ * actually make the ->poll() call. Therefore we avoid
+ * accidentally calling ->poll() when NAPI is not scheduled.
+ */
+ work = 0;
+ if (test_bit(NAPI_STATE_SCHED, &n->state)) {
+ work = n->poll(n, weight);
+ trace_napi_poll(n);
+ }
+
+ WARN_ON_ONCE(work > weight);
+
+ if (likely(work < weight))
+ goto out_unlock;
+
+ /* Drivers must not modify the NAPI state if they
+ * consume the entire weight. In such cases this code
+ * still "owns" the NAPI instance and therefore can
+ * move the instance around on the list at-will.
+ */
+ if (unlikely(napi_disable_pending(n))) {
+ napi_complete(n);
+ goto out_unlock;
+ }
+
+ if (n->gro_list) {
+ /* flush too old packets
+ * If HZ < 1000, flush all packets.
+ */
+ napi_gro_flush(n, HZ >= 1000);
+ }
+
+ /* Some drivers may have called napi_schedule
+ * prior to exhausting their budget.
+ */
+ if (unlikely(!list_empty(&n->poll_list))) {
+ pr_warn_once("%s: Budget exhausted after napi rescheduled\n",
+ n->dev ? n->dev->name : "backlog");
+ goto out_unlock;
+ }
+
+ list_add_tail(&n->poll_list, repoll);
+
+out_unlock:
+ netpoll_poll_unlock(have);
+
+ return work;
+}
+
static void net_rx_action(struct softirq_action *h)
{
struct softnet_data *sd = this_cpu_ptr(&softnet_data);
int budget = netdev_budget;
LIST_HEAD(list);
LIST_HEAD(repoll);
- void *have;
local_irq_disable();
list_splice_init(&sd->poll_list, &list);
local_irq_enable();
- while (!list_empty(&list)) {
+ for (;;) {
struct napi_struct *n;
- int work, weight;
-
- /* If softirq window is exhausted then punt.
- * Allow this to run for 2 jiffies since which will allow
- * an average latency of 1.5/HZ.
- */
- if (unlikely(budget <= 0 || time_after_eq(jiffies, time_limit)))
- goto softnet_break;
-
-
- n = list_first_entry(&list, struct napi_struct, poll_list);
- list_del_init(&n->poll_list);
- have = netpoll_poll_lock(n);
-
- weight = n->weight;
-
- /* This NAPI_STATE_SCHED test is for avoiding a race
- * with netpoll's poll_napi(). Only the entity which
- * obtains the lock and sees NAPI_STATE_SCHED set will
- * actually make the ->poll() call. Therefore we avoid
- * accidentally calling ->poll() when NAPI is not scheduled.
- */
- work = 0;
- if (test_bit(NAPI_STATE_SCHED, &n->state)) {
- work = n->poll(n, weight);
- trace_napi_poll(n);
+ if (list_empty(&list)) {
+ if (!sd_has_rps_ipi_waiting(sd) && list_empty(&repoll))
+ return;
+ break;
}
- WARN_ON_ONCE(work > weight);
-
- budget -= work;
+ n = list_first_entry(&list, struct napi_struct, poll_list);
+ budget -= napi_poll(n, &repoll);
- /* Drivers must not modify the NAPI state if they
- * consume the entire weight. In such cases this code
- * still "owns" the NAPI instance and therefore can
- * move the instance around on the list at-will.
+ /* If softirq window is exhausted then punt.
+ * Allow this to run for 2 jiffies since which will allow
+ * an average latency of 1.5/HZ.
*/
- if (unlikely(work == weight)) {
- if (unlikely(napi_disable_pending(n))) {
- napi_complete(n);
- } else {
- if (n->gro_list) {
- /* flush too old packets
- * If HZ < 1000, flush all packets.
- */
- napi_gro_flush(n, HZ >= 1000);
- }
- list_add_tail(&n->poll_list, &repoll);
- }
+ if (unlikely(budget <= 0 ||
+ time_after_eq(jiffies, time_limit))) {
+ sd->time_squeeze++;
+ break;
}
-
- netpoll_poll_unlock(have);
}
- if (!sd_has_rps_ipi_waiting(sd) &&
- list_empty(&list) &&
- list_empty(&repoll))
- return;
-out:
local_irq_disable();
list_splice_tail_init(&sd->poll_list, &list);
__raise_softirq_irqoff(NET_RX_SOFTIRQ);
net_rps_action_and_irq_enable(sd);
-
- return;
-
-softnet_break:
- sd->time_squeeze++;
- goto out;
}
struct netdev_adjacent {
skb->ignore_df = 0;
skb_dst_drop(skb);
skb->mark = 0;
+ skb_init_secmark(skb);
secpath_reset(skb);
nf_reset(skb);
nf_reset_trace(skb);
int err;
skb = udp_tunnel_handle_offloads(skb, !gs->sock->sk->sk_no_check_tx);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
min_headroom = LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len
+ GENEVE_BASE_HLEN + opt_len + sizeof(struct iphdr)
+ (vlan_tx_tag_present(skb) ? VLAN_HLEN : 0);
err = skb_cow_head(skb, min_headroom);
- if (unlikely(err))
+ if (unlikely(err)) {
+ kfree_skb(skb);
return err;
+ }
skb = vlan_hwaccel_push_inside(skb);
if (unlikely(!skb))
if (unlikely(!tcp_snd_wnd_test(tp, skb, mss_now)))
break;
- if (tso_segs == 1) {
+ if (tso_segs == 1 || !max_segs) {
if (unlikely(!tcp_nagle_test(tp, skb, mss_now,
(tcp_skb_is_last(sk, skb) ?
nonagle : TCP_NAGLE_PUSH))))
}
limit = mss_now;
- if (tso_segs > 1 && !tcp_urg_mode(tp))
+ if (tso_segs > 1 && max_segs && !tcp_urg_mode(tp))
limit = tcp_mss_split_point(sk, skb, mss_now,
min_t(unsigned int,
cwnd_quota,
return 0;
}
+static void tcp_v6_fill_cb(struct sk_buff *skb, const struct ipv6hdr *hdr,
+ const struct tcphdr *th)
+{
+ /* This is tricky: we move IP6CB at its correct location into
+ * TCP_SKB_CB(). It must be done after xfrm6_policy_check(), because
+ * _decode_session6() uses IP6CB().
+ * barrier() makes sure compiler won't play aliasing games.
+ */
+ memmove(&TCP_SKB_CB(skb)->header.h6, IP6CB(skb),
+ sizeof(struct inet6_skb_parm));
+ barrier();
+
+ TCP_SKB_CB(skb)->seq = ntohl(th->seq);
+ TCP_SKB_CB(skb)->end_seq = (TCP_SKB_CB(skb)->seq + th->syn + th->fin +
+ skb->len - th->doff*4);
+ TCP_SKB_CB(skb)->ack_seq = ntohl(th->ack_seq);
+ TCP_SKB_CB(skb)->tcp_flags = tcp_flag_byte(th);
+ TCP_SKB_CB(skb)->tcp_tw_isn = 0;
+ TCP_SKB_CB(skb)->ip_dsfield = ipv6_get_dsfield(hdr);
+ TCP_SKB_CB(skb)->sacked = 0;
+}
+
static int tcp_v6_rcv(struct sk_buff *skb)
{
const struct tcphdr *th;
th = tcp_hdr(skb);
hdr = ipv6_hdr(skb);
- /* This is tricky : We move IPCB at its correct location into TCP_SKB_CB()
- * barrier() makes sure compiler wont play fool^Waliasing games.
- */
- memmove(&TCP_SKB_CB(skb)->header.h6, IP6CB(skb),
- sizeof(struct inet6_skb_parm));
- barrier();
-
- TCP_SKB_CB(skb)->seq = ntohl(th->seq);
- TCP_SKB_CB(skb)->end_seq = (TCP_SKB_CB(skb)->seq + th->syn + th->fin +
- skb->len - th->doff*4);
- TCP_SKB_CB(skb)->ack_seq = ntohl(th->ack_seq);
- TCP_SKB_CB(skb)->tcp_flags = tcp_flag_byte(th);
- TCP_SKB_CB(skb)->tcp_tw_isn = 0;
- TCP_SKB_CB(skb)->ip_dsfield = ipv6_get_dsfield(hdr);
- TCP_SKB_CB(skb)->sacked = 0;
sk = __inet6_lookup_skb(&tcp_hashinfo, skb, th->source, th->dest,
- tcp_v6_iif(skb));
+ inet6_iif(skb));
if (!sk)
goto no_tcp_socket;
if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb))
goto discard_and_relse;
+ tcp_v6_fill_cb(skb, hdr, th);
+
#ifdef CONFIG_TCP_MD5SIG
if (tcp_v6_inbound_md5_hash(sk, skb))
goto discard_and_relse;
if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb))
goto discard_it;
+ tcp_v6_fill_cb(skb, hdr, th);
+
if (skb->len < (th->doff<<2) || tcp_checksum_complete(skb)) {
csum_error:
TCP_INC_STATS_BH(net, TCP_MIB_CSUMERRORS);
goto discard_it;
}
+ tcp_v6_fill_cb(skb, hdr, th);
+
if (skb->len < (th->doff<<2)) {
inet_twsk_put(inet_twsk(sk));
goto bad_packet;
if (!ret) {
key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
- if (!(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC))
+ if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
+ (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) ||
+ (key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE)))
sdata->crypto_tx_tailroom_needed_cnt--;
WARN_ON((key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE) &&
sta = key->sta;
sdata = key->sdata;
- if (!(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC))
+ if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
+ (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) ||
+ (key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE)))
increment_tailroom_need_count(sdata);
ret = drv_set_key(key->local, DISABLE_KEY, sdata,
if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) {
key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
- if (!(key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC))
+ if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
+ (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV) ||
+ (key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE)))
increment_tailroom_need_count(key->sdata);
}
SKB_GSO_TCPV6 |
SKB_GSO_UDP |
SKB_GSO_DODGY |
- SKB_GSO_TCP_ECN |
- SKB_GSO_GRE |
- SKB_GSO_GRE_CSUM |
- SKB_GSO_IPIP)))
+ SKB_GSO_TCP_ECN)))
goto out;
/* Setup inner SKB. */
}
#ifdef CONFIG_MODULES
-static int nfnetlink_bind(int group)
+static int nfnetlink_bind(struct net *net, int group)
{
const struct nfnetlink_subsystem *ss;
int type;
mutex_unlock(&nl_sk_hash_lock);
netlink_table_grab();
- if (nlk_sk(sk)->subscriptions)
+ if (nlk_sk(sk)->subscriptions) {
__sk_del_bind_node(sk);
+ netlink_update_listeners(sk);
+ }
netlink_table_ungrab();
}
struct module *module = NULL;
struct mutex *cb_mutex;
struct netlink_sock *nlk;
- int (*bind)(int group);
- void (*unbind)(int group);
+ int (*bind)(struct net *net, int group);
+ void (*unbind)(struct net *net, int group);
int err = 0;
sock->state = SS_UNCONNECTED;
module_put(nlk->module);
- netlink_table_grab();
if (netlink_is_kernel(sk)) {
+ netlink_table_grab();
BUG_ON(nl_table[sk->sk_protocol].registered == 0);
if (--nl_table[sk->sk_protocol].registered == 0) {
struct listeners *old;
nl_table[sk->sk_protocol].flags = 0;
nl_table[sk->sk_protocol].registered = 0;
}
- } else if (nlk->subscriptions) {
- netlink_update_listeners(sk);
+ netlink_table_ungrab();
}
- netlink_table_ungrab();
+ if (nlk->netlink_unbind) {
+ int i;
+
+ for (i = 0; i < nlk->ngroups; i++)
+ if (test_bit(i, nlk->groups))
+ nlk->netlink_unbind(sock_net(sk), i + 1);
+ }
kfree(nlk->groups);
nlk->groups = NULL;
return err;
}
-static void netlink_unbind(int group, long unsigned int groups,
- struct netlink_sock *nlk)
+static void netlink_undo_bind(int group, long unsigned int groups,
+ struct sock *sk)
{
+ struct netlink_sock *nlk = nlk_sk(sk);
int undo;
if (!nlk->netlink_unbind)
for (undo = 0; undo < group; undo++)
if (test_bit(undo, &groups))
- nlk->netlink_unbind(undo);
+ nlk->netlink_unbind(sock_net(sk), undo);
}
static int netlink_bind(struct socket *sock, struct sockaddr *addr,
for (group = 0; group < nlk->ngroups; group++) {
if (!test_bit(group, &groups))
continue;
- err = nlk->netlink_bind(group);
+ err = nlk->netlink_bind(net, group);
if (!err)
continue;
- netlink_unbind(group, groups, nlk);
+ netlink_undo_bind(group, groups, sk);
return err;
}
}
netlink_insert(sk, net, nladdr->nl_pid) :
netlink_autobind(sock);
if (err) {
- netlink_unbind(nlk->ngroups, groups, nlk);
+ netlink_undo_bind(nlk->ngroups, groups, sk);
return err;
}
}
if (!val || val - 1 >= nlk->ngroups)
return -EINVAL;
if (optname == NETLINK_ADD_MEMBERSHIP && nlk->netlink_bind) {
- err = nlk->netlink_bind(val);
+ err = nlk->netlink_bind(sock_net(sk), val);
if (err)
return err;
}
optname == NETLINK_ADD_MEMBERSHIP);
netlink_table_ungrab();
if (optname == NETLINK_DROP_MEMBERSHIP && nlk->netlink_unbind)
- nlk->netlink_unbind(val);
+ nlk->netlink_unbind(sock_net(sk), val);
err = 0;
break;
struct mutex *cb_mutex;
struct mutex cb_def_mutex;
void (*netlink_rcv)(struct sk_buff *skb);
- int (*netlink_bind)(int group);
- void (*netlink_unbind)(int group);
+ int (*netlink_bind)(struct net *net, int group);
+ void (*netlink_unbind)(struct net *net, int group);
struct module *module;
#ifdef CONFIG_NETLINK_MMAP
struct mutex pg_vec_lock;
unsigned int groups;
struct mutex *cb_mutex;
struct module *module;
- int (*bind)(int group);
- void (*unbind)(int group);
+ int (*bind)(struct net *net, int group);
+ void (*unbind)(struct net *net, int group);
bool (*compare)(struct net *net, struct sock *sock);
int registered;
};
{ .name = "notify", },
};
+static int genl_bind(struct net *net, int group)
+{
+ int i, err = 0;
+
+ down_read(&cb_lock);
+ for (i = 0; i < GENL_FAM_TAB_SIZE; i++) {
+ struct genl_family *f;
+
+ list_for_each_entry(f, genl_family_chain(i), family_list) {
+ if (group >= f->mcgrp_offset &&
+ group < f->mcgrp_offset + f->n_mcgrps) {
+ int fam_grp = group - f->mcgrp_offset;
+
+ if (!f->netnsok && net != &init_net)
+ err = -ENOENT;
+ else if (f->mcast_bind)
+ err = f->mcast_bind(net, fam_grp);
+ else
+ err = 0;
+ break;
+ }
+ }
+ }
+ up_read(&cb_lock);
+
+ return err;
+}
+
+static void genl_unbind(struct net *net, int group)
+{
+ int i;
+ bool found = false;
+
+ down_read(&cb_lock);
+ for (i = 0; i < GENL_FAM_TAB_SIZE; i++) {
+ struct genl_family *f;
+
+ list_for_each_entry(f, genl_family_chain(i), family_list) {
+ if (group >= f->mcgrp_offset &&
+ group < f->mcgrp_offset + f->n_mcgrps) {
+ int fam_grp = group - f->mcgrp_offset;
+
+ if (f->mcast_unbind)
+ f->mcast_unbind(net, fam_grp);
+ found = true;
+ break;
+ }
+ }
+ }
+ up_read(&cb_lock);
+
+ WARN_ON(!found);
+}
+
static int __net_init genl_pernet_init(struct net *net)
{
struct netlink_kernel_cfg cfg = {
.input = genl_rcv,
.flags = NL_CFG_F_NONROOT_RECV,
+ .bind = genl_bind,
+ .unbind = genl_unbind,
};
/* we'll bump the group number right afterwards */
hdr = eth_hdr(skb);
hdr->h_proto = mpls->mpls_ethertype;
- skb_set_inner_protocol(skb, skb->protocol);
+ if (!skb->inner_protocol)
+ skb_set_inner_protocol(skb, skb->protocol);
skb->protocol = mpls->mpls_ethertype;
invalidate_flow_key(key);
unsigned int group)
{
return info->nlhdr->nlmsg_flags & NLM_F_ECHO ||
- genl_has_listeners(family, genl_info_net(info)->genl_sock,
- group);
+ genl_has_listeners(family, genl_info_net(info), group);
}
static void ovs_notify(struct genl_family *family,
{
struct flow_stats *stats;
int node = numa_node_id();
+ int len = skb->len + (vlan_tx_tag_present(skb) ? VLAN_HLEN : 0);
stats = rcu_dereference(flow->stats[node]);
if (likely(new_stats)) {
new_stats->used = jiffies;
new_stats->packet_count = 1;
- new_stats->byte_count = skb->len;
+ new_stats->byte_count = len;
new_stats->tcp_flags = tcp_flags;
spin_lock_init(&new_stats->lock);
stats->used = jiffies;
stats->packet_count++;
- stats->byte_count += skb->len;
+ stats->byte_count += len;
stats->tcp_flags |= tcp_flags;
unlock:
spin_unlock(&stats->lock);
__be16 eth_type, __be16 vlan_tci, bool log)
{
const struct nlattr *a;
- bool out_tnl_port = false;
int rem, err;
if (depth >= SAMPLE_ACTION_DEPTH)
case OVS_ACTION_ATTR_OUTPUT:
if (nla_get_u32(a) >= DP_MAX_PORTS)
return -EINVAL;
- out_tnl_port = false;
-
break;
case OVS_ACTION_ATTR_HASH: {
case OVS_ACTION_ATTR_PUSH_MPLS: {
const struct ovs_action_push_mpls *mpls = nla_data(a);
- /* Networking stack do not allow simultaneous Tunnel
- * and MPLS GSO.
- */
- if (out_tnl_port)
- return -EINVAL;
-
if (!eth_p_mpls(mpls->mpls_ethertype))
return -EINVAL;
/* Prohibit push MPLS other than to a white list
case OVS_ACTION_ATTR_SET:
err = validate_set(a, key, sfa,
- &out_tnl_port, eth_type, log);
+ &skip_copy, eth_type, log);
if (err)
return err;
-
- skip_copy = out_tnl_port;
break;
case OVS_ACTION_ATTR_SAMPLE:
false);
if (err < 0)
ip_rt_put(rt);
+ return err;
+
error:
+ kfree_skb(skb);
return err;
}
skb = gre_handle_offloads(skb, !!(tun_key->tun_flags & TUNNEL_CSUM));
if (IS_ERR(skb))
- return NULL;
+ return skb;
tpi.flags = filter_tnl_flags(tun_key->tun_flags);
tpi.proto = htons(ETH_P_TEB);
if (unlikely(!OVS_CB(skb)->egress_tun_info)) {
err = -EINVAL;
- goto error;
+ goto err_free_skb;
}
tun_key = &OVS_CB(skb)->egress_tun_info->tunnel;
fl.flowi4_proto = IPPROTO_GRE;
rt = ip_route_output_key(net, &fl);
- if (IS_ERR(rt))
- return PTR_ERR(rt);
+ if (IS_ERR(rt)) {
+ err = PTR_ERR(rt);
+ goto err_free_skb;
+ }
tunnel_hlen = ip_gre_calc_hlen(tun_key->tun_flags);
/* Push Tunnel header. */
skb = __build_header(skb, tunnel_hlen);
- if (unlikely(!skb)) {
- err = 0;
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ skb = NULL;
goto err_free_rt;
}
tun_key->ipv4_tos, tun_key->ipv4_ttl, df, false);
err_free_rt:
ip_rt_put(rt);
-error:
+err_free_skb:
+ kfree_skb(skb);
return err;
}
false);
if (err < 0)
ip_rt_put(rt);
+ return err;
error:
+ kfree_skb(skb);
return err;
}
stats = this_cpu_ptr(vport->percpu_stats);
u64_stats_update_begin(&stats->syncp);
stats->rx_packets++;
- stats->rx_bytes += skb->len;
+ stats->rx_bytes += skb->len + (vlan_tx_tag_present(skb) ? VLAN_HLEN : 0);
u64_stats_update_end(&stats->syncp);
OVS_CB(skb)->input_vport = vport;
u64_stats_update_end(&stats->syncp);
} else if (sent < 0) {
ovs_vport_record_error(vport, VPORT_E_TX_ERROR);
- kfree_skb(skb);
- } else
+ } else {
ovs_vport_record_error(vport, VPORT_E_TX_DROPPED);
-
+ }
return sent;
}
struct tpacket3_hdr *last_pkt;
struct tpacket_hdr_v1 *h1 = &pbd1->hdr.bh1;
+ struct sock *sk = &po->sk;
if (po->stats.stats3.tp_drops)
status |= TP_STATUS_LOSING;
/* Flush the block */
prb_flush_block(pkc1, pbd1, status);
+ sk->sk_data_ready(sk);
+
pkc1->kactive_blk_num = GET_NEXT_PRB_BLK_NUM(pkc1);
}
smp_wmb();
#endif
- if (po->tp_version <= TPACKET_V2)
+ if (po->tp_version <= TPACKET_V2) {
__packet_set_status(po, h.raw, status);
- else
+ sk->sk_data_ready(sk);
+ } else {
prb_clear_blk_fill_status(&po->rx_ring);
-
- sk->sk_data_ready(sk);
+ }
drop_n_restore:
if (skb_head != skb->data && skb_shared(skb)) {
struct kvec *head = buf->head;
struct kvec *tail = buf->tail;
int fraglen;
- int new, old;
+ int new;
if (len > buf->len) {
WARN_ON_ONCE(1);
buf->len -= fraglen;
new = buf->page_base + buf->page_len;
- old = new + fraglen;
- xdr->page_ptr -= (old >> PAGE_SHIFT) - (new >> PAGE_SHIFT);
+
+ xdr->page_ptr = buf->pages + (new >> PAGE_SHIFT);
if (buf->page_len) {
xdr->p = page_address(*xdr->page_ptr);
Most distributions have a CRDA package. So if unsure, say N.
config CFG80211_WEXT
- bool
+ bool "cfg80211 wireless extensions compatibility"
depends on CFG80211
select WEXT_CORE
help
__clean-files := $(filter-out $(no-clean-files), $(__clean-files))
-# as clean-files is given relative to the current directory, this adds
-# a $(obj) prefix, except for absolute paths
+# clean-files is given relative to the current directory, unless it
+# starts with $(objtree)/ (which means "./", so do not add "./" unless
+# you want to delete a file from the toplevel object directory).
__clean-files := $(wildcard \
- $(addprefix $(obj)/, $(filter-out /%, $(__clean-files))) \
- $(filter /%, $(__clean-files)))
+ $(addprefix $(obj)/, $(filter-out $(objtree)/%, $(__clean-files))) \
+ $(filter $(objtree)/%, $(__clean-files)))
-# as clean-dirs is given relative to the current directory, this adds
-# a $(obj) prefix, except for absolute paths
+# same as clean-files
__clean-dirs := $(wildcard \
- $(addprefix $(obj)/, $(filter-out /%, $(clean-dirs))) \
- $(filter /%, $(clean-dirs)))
+ $(addprefix $(obj)/, $(filter-out $(objtree)/%, $(clean-dirs))) \
+ $(filter $(objtree)/%, $(clean-dirs)))
# ==========================================================================
if (test_bit(KEY_FLAG_INSTANTIATED, &key->flags))
atomic_dec(&key->user->nikeys);
- key_user_put(key->user);
-
/* now throw away the key memory */
if (key->type->destroy)
key->type->destroy(key);
+ key_user_put(key->user);
+
kfree(key->description);
#ifdef KEY_DEBUGGING
spin_lock_irq(&efw->lock);
t = (struct snd_efw_transaction *)data;
- length = min_t(size_t, t->length * sizeof(t->length), length);
+ length = min_t(size_t, be32_to_cpu(t->length) * sizeof(u32), length);
if (efw->push_ptr < efw->pull_ptr)
capacity = (unsigned int)(efw->pull_ptr - efw->push_ptr);
EXPORT_SYMBOL_GPL(azx_mixer_create);
+static bool is_input_stream(struct azx *chip, unsigned char index)
+{
+ return (index >= chip->capture_index_offset &&
+ index < chip->capture_index_offset + chip->capture_streams);
+}
+
/* initialize SD streams */
int azx_init_stream(struct azx *chip)
{
int i;
+ int in_stream_tag = 0;
+ int out_stream_tag = 0;
/* initialize each stream (aka device)
* assign the starting bdl address to each stream (device)
azx_dev->sd_addr = chip->remap_addr + (0x20 * i + 0x80);
/* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */
azx_dev->sd_int_sta_mask = 1 << i;
- /* stream tag: must be non-zero and unique */
azx_dev->index = i;
- azx_dev->stream_tag = i + 1;
+
+ /* stream tag must be unique throughout
+ * the stream direction group,
+ * valid values 1...15
+ * use separate stream tag if the flag
+ * AZX_DCAPS_SEPARATE_STREAM_TAG is used
+ */
+ if (chip->driver_caps & AZX_DCAPS_SEPARATE_STREAM_TAG)
+ azx_dev->stream_tag =
+ is_input_stream(chip, i) ?
+ ++in_stream_tag :
+ ++out_stream_tag;
+ else
+ azx_dev->stream_tag = i + 1;
}
return 0;
AZX_DCAPS_PM_RUNTIME | AZX_DCAPS_I915_POWERWELL |\
AZX_DCAPS_SNOOP_TYPE(SCH))
+#define AZX_DCAPS_INTEL_SKYLAKE \
+ (AZX_DCAPS_INTEL_PCH | AZX_DCAPS_SEPARATE_STREAM_TAG)
+
/* quirks for ATI SB / AMD Hudson */
#define AZX_DCAPS_PRESET_ATI_SB \
(AZX_DCAPS_NO_TCSEL | AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_POSFIX_LPIB |\
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Sunrise Point-LP */
{ PCI_DEVICE(0x8086, 0x9d70),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_SKYLAKE },
/* Haswell */
{ PCI_DEVICE(0x8086, 0x0a0c),
.driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL },
#define AZX_DCAPS_I915_POWERWELL (1 << 27) /* HSW i915 powerwell support */
#define AZX_DCAPS_CORBRP_SELF_CLEAR (1 << 28) /* CORBRP clears itself after reset */
#define AZX_DCAPS_NO_MSI64 (1 << 29) /* Stick to 32-bit MSIs */
+#define AZX_DCAPS_SEPARATE_STREAM_TAG (1 << 30) /* capture and playback use separate stream tag */
enum {
AZX_SNOOP_TYPE_NONE ,
{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
{ .id = 0x10de0070, .name = "GPU 70 HDMI/DP", .patch = patch_nvhdmi },
{ .id = 0x10de0071, .name = "GPU 71 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0072, .name = "GPU 72 HDMI/DP", .patch = patch_nvhdmi },
{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
{ .id = 0x11069f80, .name = "VX900 HDMI/DP", .patch = patch_via_hdmi },
{ .id = 0x11069f81, .name = "VX900 HDMI/DP", .patch = patch_via_hdmi },
MODULE_ALIAS("snd-hda-codec-id:10de0067");
MODULE_ALIAS("snd-hda-codec-id:10de0070");
MODULE_ALIAS("snd-hda-codec-id:10de0071");
+MODULE_ALIAS("snd-hda-codec-id:10de0072");
MODULE_ALIAS("snd-hda-codec-id:10de8001");
MODULE_ALIAS("snd-hda-codec-id:11069f80");
MODULE_ALIAS("snd-hda-codec-id:11069f81");
spec->gpio_mask;
}
if (get_int_hint(codec, "gpio_dir", &spec->gpio_dir))
- spec->gpio_mask &= spec->gpio_mask;
- if (get_int_hint(codec, "gpio_data", &spec->gpio_data))
spec->gpio_dir &= spec->gpio_mask;
+ if (get_int_hint(codec, "gpio_data", &spec->gpio_data))
+ spec->gpio_data &= spec->gpio_mask;
if (get_int_hint(codec, "eapd_mask", &spec->eapd_mask))
spec->eapd_mask &= spec->gpio_mask;
if (get_int_hint(codec, "gpio_mute", &spec->gpio_mute))
static int rt5677_dsp_vad_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct rt5677_priv *rt5677 = snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = rt5677->dsp_vad_en;
static int rt5677_dsp_vad_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct rt5677_priv *rt5677 = snd_soc_component_get_drvdata(component);
+ struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
rt5677->dsp_vad_en = !!ucontrol->value.integer.value[0];
switch (config->chan_nr) {
case EIGHT_CHANNEL_SUPPORT:
- ch_reg = 3;
- break;
case SIX_CHANNEL_SUPPORT:
- ch_reg = 2;
- break;
case FOUR_CHANNEL_SUPPORT:
- ch_reg = 1;
- break;
case TWO_CHANNEL_SUPPORT:
- ch_reg = 0;
break;
default:
dev_err(dev->dev, "channel not supported\n");
i2s_disable_channels(dev, substream->stream);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- i2s_write_reg(dev->i2s_base, TCR(ch_reg), xfer_resolution);
- i2s_write_reg(dev->i2s_base, TFCR(ch_reg), 0x02);
- irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
- i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x30);
- i2s_write_reg(dev->i2s_base, TER(ch_reg), 1);
- } else {
- i2s_write_reg(dev->i2s_base, RCR(ch_reg), xfer_resolution);
- i2s_write_reg(dev->i2s_base, RFCR(ch_reg), 0x07);
- irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
- i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x03);
- i2s_write_reg(dev->i2s_base, RER(ch_reg), 1);
+ for (ch_reg = 0; ch_reg < (config->chan_nr / 2); ch_reg++) {
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ i2s_write_reg(dev->i2s_base, TCR(ch_reg),
+ xfer_resolution);
+ i2s_write_reg(dev->i2s_base, TFCR(ch_reg), 0x02);
+ irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
+ i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x30);
+ i2s_write_reg(dev->i2s_base, TER(ch_reg), 1);
+ } else {
+ i2s_write_reg(dev->i2s_base, RCR(ch_reg),
+ xfer_resolution);
+ i2s_write_reg(dev->i2s_base, RFCR(ch_reg), 0x07);
+ irq = i2s_read_reg(dev->i2s_base, IMR(ch_reg));
+ i2s_write_reg(dev->i2s_base, IMR(ch_reg), irq & ~0x03);
+ i2s_write_reg(dev->i2s_base, RER(ch_reg), 1);
+ }
}
i2s_write_reg(dev->i2s_base, CCR, ccr);
snd_soc_dai_set_dma_data(dai, substream, NULL);
}
+static int dw_i2s_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ i2s_write_reg(dev->i2s_base, TXFFR, 1);
+ else
+ i2s_write_reg(dev->i2s_base, RXFFR, 1);
+
+ return 0;
+}
+
static int dw_i2s_trigger(struct snd_pcm_substream *substream,
int cmd, struct snd_soc_dai *dai)
{
.startup = dw_i2s_startup,
.shutdown = dw_i2s_shutdown,
.hw_params = dw_i2s_hw_params,
+ .prepare = dw_i2s_prepare,
.trigger = dw_i2s_trigger,
};
config SND_SOC_INTEL_BYTCR_RT5640_MACH
tristate "ASoC Audio DSP Support for MID BYT Platform"
- depends on X86
+ depends on X86 && I2C
select SND_SOC_RT5640
select SND_SST_MFLD_PLATFORM
select SND_SST_IPC_ACPI
config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec"
- depends on X86_INTEL_LPSS
+ depends on X86_INTEL_LPSS && I2C
select SND_SOC_RT5670
select SND_SST_MFLD_PLATFORM
select SND_SST_IPC_ACPI
MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver");
MODULE_AUTHOR("Subhransu S. Prusty <subhransu.s.prusty@intel.com>");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:bytrt5640-audio");
+MODULE_ALIAS("platform:bytt100_rt5640");
/* does block span more than 1 section */
if (ba->offset >= block->offset && ba->offset < block_end) {
+ /* add block */
+ list_move(&block->list, &dsp->used_block_list);
+ list_add(&block->module_list, block_list);
/* align ba to block boundary */
- ba->offset = block->offset;
+ ba->size -= block_end - ba->offset;
+ ba->offset = block_end;
err = block_alloc_contiguous(dsp, ba, block_list);
if (err < 0)
}
static struct sst_machines sst_acpi_bytcr[] = {
- {"10EC5640", "T100", "bytt100_rt5640", NULL, "fw_sst_0f28.bin",
+ {"10EC5640", "T100", "bytt100_rt5640", NULL, "intel/fw_sst_0f28.bin",
&byt_rvp_platform_data },
{},
};
i2s->playback_dma_data.addr = res->start + I2S_TXDR;
i2s->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- i2s->playback_dma_data.maxburst = 16;
+ i2s->playback_dma_data.maxburst = 4;
i2s->capture_dma_data.addr = res->start + I2S_RXDR;
i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- i2s->capture_dma_data.maxburst = 16;
+ i2s->capture_dma_data.maxburst = 4;
i2s->dev = &pdev->dev;
dev_set_drvdata(&pdev->dev, i2s);
#define I2S_DMACR_TDE_DISABLE (0 << I2S_DMACR_TDE_SHIFT)
#define I2S_DMACR_TDE_ENABLE (1 << I2S_DMACR_TDE_SHIFT)
#define I2S_DMACR_TDL_SHIFT 0
-#define I2S_DMACR_TDL(x) ((x - 1) << I2S_DMACR_TDL_SHIFT)
+#define I2S_DMACR_TDL(x) ((x) << I2S_DMACR_TDL_SHIFT)
#define I2S_DMACR_TDL_MASK (0x1f << I2S_DMACR_TDL_SHIFT)
/*
const char *propname)
{
struct device_node *np = card->dev->of_node;
- int num_routes, old_routes;
+ int num_routes;
struct snd_soc_dapm_route *routes;
int i, ret;
return -EINVAL;
}
- old_routes = card->num_dapm_routes;
- routes = devm_kzalloc(card->dev,
- (old_routes + num_routes) * sizeof(*routes),
+ routes = devm_kzalloc(card->dev, num_routes * sizeof(*routes),
GFP_KERNEL);
if (!routes) {
dev_err(card->dev,
return -EINVAL;
}
- memcpy(routes, card->dapm_routes, old_routes * sizeof(*routes));
-
for (i = 0; i < num_routes; i++) {
ret = of_property_read_string_index(np, propname,
- 2 * i, &routes[old_routes + i].sink);
+ 2 * i, &routes[i].sink);
if (ret) {
dev_err(card->dev,
"ASoC: Property '%s' index %d could not be read: %d\n",
return -EINVAL;
}
ret = of_property_read_string_index(np, propname,
- (2 * i) + 1, &routes[old_routes + i].source);
+ (2 * i) + 1, &routes[i].source);
if (ret) {
dev_err(card->dev,
"ASoC: Property '%s' index %d could not be read: %d\n",
}
}
- card->num_dapm_routes += num_routes;
+ card->num_dapm_routes = num_routes;
card->dapm_routes = routes;
return 0;
return -EINVAL;
}
- if (cdev->n_streams < 2) {
+ if (cdev->n_streams < 1) {
dev_err(dev, "bogus number of streams: %d\n", cdev->n_streams);
return -EINVAL;
}
*
* TODO: Hook into free() and add that check there as well.
*/
- debug_check_no_locks_freed(mutex, mutex + sizeof(*mutex));
+ debug_check_no_locks_freed(mutex, sizeof(*mutex));
__del_lock(__get_lock(mutex));
return ll_pthread_mutex_destroy(mutex);
}
{
try_init_preload();
- debug_check_no_locks_freed(rwlock, rwlock + sizeof(*rwlock));
+ debug_check_no_locks_freed(rwlock, sizeof(*rwlock));
__del_lock(__get_lock(rwlock));
return ll_pthread_rwlock_destroy(rwlock);
}
if (nr_samples > 0) {
total_nr_samples += nr_samples;
hists__collapse_resort(hists, NULL);
- hists__output_resort(hists);
+ hists__output_resort(hists, NULL);
if (symbol_conf.event_group &&
!perf_evsel__is_group_leader(pos))
return __hist_entry__cmp_compute(p_left, p_right, c);
}
+static int64_t
+hist_entry__cmp_nop(struct hist_entry *left __maybe_unused,
+ struct hist_entry *right __maybe_unused)
+{
+ return 0;
+}
+
+static int64_t
+hist_entry__cmp_baseline(struct hist_entry *left, struct hist_entry *right)
+{
+ if (sort_compute)
+ return 0;
+
+ if (left->stat.period == right->stat.period)
+ return 0;
+ return left->stat.period > right->stat.period ? 1 : -1;
+}
+
+static int64_t
+hist_entry__cmp_delta(struct hist_entry *left, struct hist_entry *right)
+{
+ return hist_entry__cmp_compute(right, left, COMPUTE_DELTA);
+}
+
+static int64_t
+hist_entry__cmp_ratio(struct hist_entry *left, struct hist_entry *right)
+{
+ return hist_entry__cmp_compute(right, left, COMPUTE_RATIO);
+}
+
+static int64_t
+hist_entry__cmp_wdiff(struct hist_entry *left, struct hist_entry *right)
+{
+ return hist_entry__cmp_compute(right, left, COMPUTE_WEIGHTED_DIFF);
+}
+
static void insert_hist_entry_by_compute(struct rb_root *root,
struct hist_entry *he,
int c)
hists__precompute(hists);
hists__compute_resort(hists);
} else {
- hists__output_resort(hists);
+ hists__output_resort(hists, NULL);
}
hists__fprintf(hists, true, 0, 0, 0, stdout);
fmt->header = hpp__header;
fmt->width = hpp__width;
fmt->entry = hpp__entry_global;
+ fmt->cmp = hist_entry__cmp_nop;
+ fmt->collapse = hist_entry__cmp_nop;
/* TODO more colors */
switch (idx) {
case PERF_HPP_DIFF__BASELINE:
fmt->color = hpp__color_baseline;
+ fmt->sort = hist_entry__cmp_baseline;
break;
case PERF_HPP_DIFF__DELTA:
fmt->color = hpp__color_delta;
+ fmt->sort = hist_entry__cmp_delta;
break;
case PERF_HPP_DIFF__RATIO:
fmt->color = hpp__color_ratio;
+ fmt->sort = hist_entry__cmp_ratio;
break;
case PERF_HPP_DIFF__WEIGHTED_DIFF:
fmt->color = hpp__color_wdiff;
+ fmt->sort = hist_entry__cmp_wdiff;
break;
default:
+ fmt->sort = hist_entry__cmp_nop;
break;
}
init_header(d, dfmt);
perf_hpp__column_register(fmt);
+ perf_hpp__register_sort_field(fmt);
}
static void ui_init(void)
int cmd_list(int argc, const char **argv, const char *prefix __maybe_unused)
{
int i;
- const struct option list_options[] = {
+ bool raw_dump = false;
+ struct option list_options[] = {
+ OPT_BOOLEAN(0, "raw-dump", &raw_dump, "Dump raw events"),
OPT_END()
};
const char * const list_usage[] = {
NULL
};
+ set_option_flag(list_options, 0, "raw-dump", PARSE_OPT_HIDDEN);
+
argc = parse_options(argc, argv, list_options, list_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
setup_pager();
+ if (raw_dump) {
+ print_events(NULL, true);
+ return 0;
+ }
+
if (argc == 0) {
print_events(NULL, false);
return 0;
print_hwcache_events(NULL, false);
else if (strcmp(argv[i], "pmu") == 0)
print_pmu_events(NULL, false);
- else if (strcmp(argv[i], "--raw-dump") == 0)
- print_events(NULL, true);
else {
char *sep = strchr(argv[i], ':'), *s;
int sep_idx;
ui_progress__finish();
}
+static void report__output_resort(struct report *rep)
+{
+ struct ui_progress prog;
+ struct perf_evsel *pos;
+
+ ui_progress__init(&prog, rep->nr_entries, "Sorting events for output...");
+
+ evlist__for_each(rep->session->evlist, pos)
+ hists__output_resort(evsel__hists(pos), &prog);
+
+ ui_progress__finish();
+}
+
static int __cmd_report(struct report *rep)
{
int ret;
if (session_done())
return 0;
+ /*
+ * recalculate number of entries after collapsing since it
+ * might be changed during the collapse phase.
+ */
+ rep->nr_entries = 0;
+ evlist__for_each(session->evlist, pos)
+ rep->nr_entries += evsel__hists(pos)->nr_entries;
+
if (rep->nr_entries == 0) {
ui__error("The %s file has no samples!\n", file->path);
return 0;
}
- evlist__for_each(session->evlist, pos)
- hists__output_resort(evsel__hists(pos));
+ report__output_resort(rep);
return report__browse_hists(rep);
}
}
hists__collapse_resort(hists, NULL);
- hists__output_resort(hists);
+ hists__output_resort(hists, NULL);
hists__output_recalc_col_len(hists, top->print_entries - printed);
putchar('\n');
}
hists__collapse_resort(hists, NULL);
- hists__output_resort(hists);
+ hists__output_resort(hists, NULL);
}
static void *display_thread_tui(void *arg)
* function since TEST_ASSERT_VAL() returns in case of failure.
*/
hists__collapse_resort(hists, NULL);
- hists__output_resort(hists);
+ hists__output_resort(hists, NULL);
if (verbose > 2) {
pr_info("use callchain: %d, cumulate callchain: %d\n",
* 30.00% 10.00% perf perf [.] cmd_record
* 20.00% 0.00% bash libc [.] malloc
* 10.00% 10.00% bash [kernel] [k] page_fault
- * 10.00% 10.00% perf [kernel] [k] schedule
- * 10.00% 0.00% perf [kernel] [k] sys_perf_event_open
+ * 10.00% 10.00% bash bash [.] xmalloc
* 10.00% 10.00% perf [kernel] [k] page_fault
- * 10.00% 10.00% perf libc [.] free
* 10.00% 10.00% perf libc [.] malloc
- * 10.00% 10.00% bash bash [.] xmalloc
+ * 10.00% 10.00% perf [kernel] [k] schedule
+ * 10.00% 10.00% perf libc [.] free
+ * 10.00% 0.00% perf [kernel] [k] sys_perf_event_open
*/
struct result expected[] = {
{ 7000, 2000, "perf", "perf", "main" },
{ 3000, 1000, "perf", "perf", "cmd_record" },
{ 2000, 0, "bash", "libc", "malloc" },
{ 1000, 1000, "bash", "[kernel]", "page_fault" },
- { 1000, 1000, "perf", "[kernel]", "schedule" },
- { 1000, 0, "perf", "[kernel]", "sys_perf_event_open" },
+ { 1000, 1000, "bash", "bash", "xmalloc" },
{ 1000, 1000, "perf", "[kernel]", "page_fault" },
+ { 1000, 1000, "perf", "[kernel]", "schedule" },
{ 1000, 1000, "perf", "libc", "free" },
{ 1000, 1000, "perf", "libc", "malloc" },
- { 1000, 1000, "bash", "bash", "xmalloc" },
+ { 1000, 0, "perf", "[kernel]", "sys_perf_event_open" },
};
symbol_conf.use_callchain = false;
* malloc
* main
*
- * 10.00% 10.00% perf [kernel] [k] schedule
+ * 10.00% 10.00% bash bash [.] xmalloc
* |
- * --- schedule
- * run_command
+ * --- xmalloc
+ * malloc
+ * xmalloc <--- NOTE: there's a cycle
+ * malloc
+ * xmalloc
* main
*
* 10.00% 0.00% perf [kernel] [k] sys_perf_event_open
* run_command
* main
*
+ * 10.00% 10.00% perf [kernel] [k] schedule
+ * |
+ * --- schedule
+ * run_command
+ * main
+ *
* 10.00% 10.00% perf libc [.] free
* |
* --- free
* run_command
* main
*
- * 10.00% 10.00% bash bash [.] xmalloc
- * |
- * --- xmalloc
- * malloc
- * xmalloc <--- NOTE: there's a cycle
- * malloc
- * xmalloc
- * main
- *
*/
struct result expected[] = {
{ 7000, 2000, "perf", "perf", "main" },
{ 3000, 1000, "perf", "perf", "cmd_record" },
{ 2000, 0, "bash", "libc", "malloc" },
{ 1000, 1000, "bash", "[kernel]", "page_fault" },
- { 1000, 1000, "perf", "[kernel]", "schedule" },
+ { 1000, 1000, "bash", "bash", "xmalloc" },
{ 1000, 0, "perf", "[kernel]", "sys_perf_event_open" },
{ 1000, 1000, "perf", "[kernel]", "page_fault" },
+ { 1000, 1000, "perf", "[kernel]", "schedule" },
{ 1000, 1000, "perf", "libc", "free" },
{ 1000, 1000, "perf", "libc", "malloc" },
- { 1000, 1000, "bash", "bash", "xmalloc" },
};
struct callchain_result expected_callchain[] = {
{
{ "bash", "main" }, },
},
{
- 3, { { "[kernel]", "schedule" },
- { "perf", "run_command" },
- { "perf", "main" }, },
+ 6, { { "bash", "xmalloc" },
+ { "libc", "malloc" },
+ { "bash", "xmalloc" },
+ { "libc", "malloc" },
+ { "bash", "xmalloc" },
+ { "bash", "main" }, },
},
{
3, { { "[kernel]", "sys_perf_event_open" },
{ "perf", "run_command" },
{ "perf", "main" }, },
},
+ {
+ 3, { { "[kernel]", "schedule" },
+ { "perf", "run_command" },
+ { "perf", "main" }, },
+ },
{
4, { { "libc", "free" },
{ "perf", "cmd_record" },
{ "perf", "run_command" },
{ "perf", "main" }, },
},
- {
- 6, { { "bash", "xmalloc" },
- { "libc", "malloc" },
- { "bash", "xmalloc" },
- { "libc", "malloc" },
- { "bash", "xmalloc" },
- { "bash", "main" }, },
- },
};
symbol_conf.use_callchain = true;
struct hists *hists = evsel__hists(evsel);
hists__collapse_resort(hists, NULL);
- hists__output_resort(hists);
+ hists__output_resort(hists, NULL);
if (verbose > 2) {
pr_info("Normal histogram\n");
goto out;
hists__collapse_resort(hists, NULL);
- hists__output_resort(hists);
+ hists__output_resort(hists, NULL);
if (verbose > 2) {
pr_info("[fields = %s, sort = %s]\n", field_order, sort_order);
goto out;
hists__collapse_resort(hists, NULL);
- hists__output_resort(hists);
+ hists__output_resort(hists, NULL);
if (verbose > 2) {
pr_info("[fields = %s, sort = %s]\n", field_order, sort_order);
goto out;
hists__collapse_resort(hists, NULL);
- hists__output_resort(hists);
+ hists__output_resort(hists, NULL);
if (verbose > 2) {
pr_info("[fields = %s, sort = %s]\n", field_order, sort_order);
goto out;
hists__collapse_resort(hists, NULL);
- hists__output_resort(hists);
+ hists__output_resort(hists, NULL);
if (verbose > 2) {
pr_info("[fields = %s, sort = %s]\n", field_order, sort_order);
goto out;
hists__collapse_resort(hists, NULL);
- hists__output_resort(hists);
+ hists__output_resort(hists, NULL);
if (verbose > 2) {
pr_info("[fields = %s, sort = %s]\n", field_order, sort_order);
bool need_percent;
node = rb_first(root);
- need_percent = !!rb_next(node);
+ need_percent = node && rb_next(node);
while (node) {
struct callchain_node *child = rb_entry(node, struct callchain_node, rb_node);
if (ret)
return ret;
+ if (a->thread != b->thread || !symbol_conf.use_callchain)
+ return 0;
+
ret = b->callchain->max_depth - a->callchain->max_depth;
}
return ret;
#include <signal.h>
#include <stdbool.h>
+#ifdef HAVE_BACKTRACE_SUPPORT
+#include <execinfo.h>
+#endif
#include "../../util/cache.h"
#include "../../util/debug.h"
return SLkp_getkey();
}
+#ifdef HAVE_BACKTRACE_SUPPORT
+static void ui__signal_backtrace(int sig)
+{
+ void *stackdump[32];
+ size_t size;
+
+ ui__exit(false);
+ psignal(sig, "perf");
+
+ printf("-------- backtrace --------\n");
+ size = backtrace(stackdump, ARRAY_SIZE(stackdump));
+ backtrace_symbols_fd(stackdump, size, STDOUT_FILENO);
+
+ exit(0);
+}
+#else
+# define ui__signal_backtrace ui__signal
+#endif
+
static void ui__signal(int sig)
{
ui__exit(false);
ui_browser__init();
tui_progress__init();
- signal(SIGSEGV, ui__signal);
- signal(SIGFPE, ui__signal);
+ signal(SIGSEGV, ui__signal_backtrace);
+ signal(SIGFPE, ui__signal_backtrace);
signal(SIGINT, ui__signal);
signal(SIGQUIT, ui__signal);
signal(SIGTERM, ui__signal);
return bf;
}
+
+static void free_callchain_node(struct callchain_node *node)
+{
+ struct callchain_list *list, *tmp;
+ struct callchain_node *child;
+ struct rb_node *n;
+
+ list_for_each_entry_safe(list, tmp, &node->val, list) {
+ list_del(&list->list);
+ free(list);
+ }
+
+ n = rb_first(&node->rb_root_in);
+ while (n) {
+ child = container_of(n, struct callchain_node, rb_node_in);
+ n = rb_next(n);
+ rb_erase(&child->rb_node_in, &node->rb_root_in);
+
+ free_callchain_node(child);
+ free(child);
+ }
+}
+
+void free_callchain(struct callchain_root *root)
+{
+ if (!symbol_conf.use_callchain)
+ return;
+
+ free_callchain_node(&root->node);
+}
char *callchain_list__sym_name(struct callchain_list *cl,
char *bf, size_t bfsize, bool show_dso);
+void free_callchain(struct callchain_root *root);
+
#endif /* __PERF_CALLCHAIN_H */
#include "evlist.h"
#include "evsel.h"
#include "annotate.h"
+#include "ui/progress.h"
#include <math.h>
static bool hists__filter_entry_by_dso(struct hists *hists,
size_t callchain_size = 0;
struct hist_entry *he;
- if (symbol_conf.use_callchain || symbol_conf.cumulate_callchain)
+ if (symbol_conf.use_callchain)
callchain_size = sizeof(struct callchain_root);
he = zalloc(sizeof(*he) + callchain_size);
iter->he = he;
he_cache[iter->curr++] = he;
- callchain_append(he->callchain, &callchain_cursor, sample->period);
+ hist_entry__append_callchain(he, sample);
/*
* We need to re-initialize the cursor since callchain_append()
iter->he = he;
he_cache[iter->curr++] = he;
- callchain_append(he->callchain, &cursor, sample->period);
+ if (symbol_conf.use_callchain)
+ callchain_append(he->callchain, &cursor, sample->period);
return 0;
}
zfree(&he->mem_info);
zfree(&he->stat_acc);
free_srcline(he->srcline);
+ free_callchain(he->callchain);
free(he);
}
else
p = &(*p)->rb_right;
}
+ hists->nr_entries++;
rb_link_node(&he->rb_node_in, parent, p);
rb_insert_color(&he->rb_node_in, root);
if (!sort__need_collapse)
return;
+ hists->nr_entries = 0;
+
root = hists__get_rotate_entries_in(hists);
+
next = rb_first(root);
while (next) {
rb_insert_color(&he->rb_node, entries);
}
-void hists__output_resort(struct hists *hists)
+void hists__output_resort(struct hists *hists, struct ui_progress *prog)
{
struct rb_root *root;
struct rb_node *next;
if (!n->filtered)
hists__calc_col_len(hists, n);
+
+ if (prog)
+ ui_progress__update(prog, 1);
}
}
struct hists *hists);
void hist_entry__free(struct hist_entry *);
-void hists__output_resort(struct hists *hists);
+void hists__output_resort(struct hists *hists, struct ui_progress *prog);
void hists__collapse_resort(struct hists *hists, struct ui_progress *prog);
void hists__decay_entries(struct hists *hists, bool zap_user, bool zap_kernel);
}
if (ntevs == 0) { /* No error but failed to find probe point. */
- pr_warning("Probe point '%s' not found.\n",
+ pr_warning("Probe point '%s' not found in debuginfo.\n",
synthesize_perf_probe_point(&pev->point));
- return -ENOENT;
+ if (need_dwarf)
+ return -ENOENT;
+ return 0;
}
/* Error path : ntevs < 0 */
pr_debug("An error occurred in debuginfo analysis (%d).\n", ntevs);
int ret = 0;
#if _ELFUTILS_PREREQ(0, 142)
+ Elf *elf;
+ GElf_Ehdr ehdr;
+ GElf_Shdr shdr;
+
/* Get the call frame information from this dwarf */
- pf->cfi = dwarf_getcfi_elf(dwarf_getelf(dbg->dbg));
+ elf = dwarf_getelf(dbg->dbg);
+ if (elf == NULL)
+ return -EINVAL;
+
+ if (gelf_getehdr(elf, &ehdr) == NULL)
+ return -EINVAL;
+
+ if (elf_section_by_name(elf, &ehdr, &shdr, ".eh_frame", NULL) &&
+ shdr.sh_type == SHT_PROGBITS) {
+ pf->cfi = dwarf_getcfi_elf(elf);
+ } else {
+ pf->cfi = dwarf_getcfi(dbg->dbg);
+ }
#endif
off = 0;
}
get_cpu_info(0, &cpupower_cpu_info);
- run_as_root = !getuid();
+ run_as_root = !geteuid();
if (run_as_root) {
ret = uname(&uts);
if (!ret && !strcmp(uts.machine, "x86_64") &&
snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpuidle");
if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode))
- return -ENODEV;
+ return 0;
snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/cpuidle/state0", cpu);
if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode))
*/
fd = open(longpath, O_RDONLY);
if (fd > 0) {
- printf("Invoke copy of '%s' via filename of length %lu:\n",
+ printf("Invoke copy of '%s' via filename of length %zu:\n",
src, strlen(longpath));
fail += check_execveat(fd, "", AT_EMPTY_PATH);
} else {
- printf("Failed to open length %lu filename, errno=%d (%s)\n",
+ printf("Failed to open length %zu filename, errno=%d (%s)\n",
strlen(longpath), errno, strerror(errno));
fail++;
}
WARN_ON(mslots[i].id != id);
if (!new->npages) {
+ WARN_ON(!mslots[i].npages);
new->base_gfn = 0;
if (mslots[i].npages)
slots->used_slots--;
slots->id_to_index[mslots[i].id] = i;
i++;
}
- while (i > 0 &&
- new->base_gfn > mslots[i - 1].base_gfn) {
- mslots[i] = mslots[i - 1];
- slots->id_to_index[mslots[i].id] = i;
- i--;
- }
+
+ /*
+ * The ">=" is needed when creating a slot with base_gfn == 0,
+ * so that it moves before all those with base_gfn == npages == 0.
+ *
+ * On the other hand, if new->npages is zero, the above loop has
+ * already left i pointing to the beginning of the empty part of
+ * mslots, and the ">=" would move the hole backwards in this
+ * case---which is wrong. So skip the loop when deleting a slot.
+ */
+ if (new->npages) {
+ while (i > 0 &&
+ new->base_gfn >= mslots[i - 1].base_gfn) {
+ mslots[i] = mslots[i - 1];
+ slots->id_to_index[mslots[i].id] = i;
+ i--;
+ }
+ } else
+ WARN_ON_ONCE(i != slots->used_slots);
mslots[i] = *new;
slots->id_to_index[mslots[i].id] = i;
projects / linux-drm-fsl-dcu.git / commitdiff