If in doubt, say N.
+config X86_E_POWERSAVER
+ tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)"
+ select CPU_FREQ_TABLE
+ depends on EXPERIMENTAL
+ help
+ This adds the CPUFreq driver for VIA C7 processors.
+
+ If in doubt, say N.
+
comment "shared options"
config X86_ACPI_CPUFREQ_PROC_INTF
obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
+obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o
obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o
obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o
obj-$(CONFIG_X86_LONGRUN) += longrun.o
--- /dev/null
+/*
+ * Based on documentation provided by Dave Jones. Thanks!
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ *
+ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <asm/msr.h>
+#include <asm/tsc.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#define EPS_BRAND_C7M 0
+#define EPS_BRAND_C7 1
+#define EPS_BRAND_EDEN 2
+#define EPS_BRAND_C3 3
+
+struct eps_cpu_data {
+ u32 fsb;
+ struct cpufreq_frequency_table freq_table[];
+};
+
+static struct eps_cpu_data *eps_cpu[NR_CPUS];
+
+
+static unsigned int eps_get(unsigned int cpu)
+{
+ struct eps_cpu_data *centaur;
+ u32 lo, hi;
+
+ if (cpu)
+ return 0;
+ centaur = eps_cpu[cpu];
+ if (centaur == NULL)
+ return 0;
+
+ /* Return current frequency */
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ return centaur->fsb * ((lo >> 8) & 0xff);
+}
+
+static int eps_set_state(struct eps_cpu_data *centaur,
+ unsigned int cpu,
+ u32 dest_state)
+{
+ struct cpufreq_freqs freqs;
+ u32 lo, hi;
+ int err = 0;
+ int i;
+
+ freqs.old = eps_get(cpu);
+ freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff);
+ freqs.cpu = cpu;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* Wait while CPU is busy */
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ i = 0;
+ while (lo & ((1 << 16) | (1 << 17))) {
+ udelay(16);
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ i++;
+ if (unlikely(i > 64)) {
+ err = -ENODEV;
+ goto postchange;
+ }
+ }
+ /* Set new multiplier and voltage */
+ wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0);
+ /* Wait until transition end */
+ i = 0;
+ do {
+ udelay(16);
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ i++;
+ if (unlikely(i > 64)) {
+ err = -ENODEV;
+ goto postchange;
+ }
+ } while (lo & ((1 << 16) | (1 << 17)));
+
+ /* Return current frequency */
+postchange:
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ freqs.new = centaur->fsb * ((lo >> 8) & 0xff);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ return err;
+}
+
+static int eps_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct eps_cpu_data *centaur;
+ unsigned int newstate = 0;
+ unsigned int cpu = policy->cpu;
+ unsigned int dest_state;
+ int ret;
+
+ if (unlikely(eps_cpu[cpu] == NULL))
+ return -ENODEV;
+ centaur = eps_cpu[cpu];
+
+ if (unlikely(cpufreq_frequency_table_target(policy,
+ &eps_cpu[cpu]->freq_table[0],
+ target_freq,
+ relation,
+ &newstate))) {
+ return -EINVAL;
+ }
+
+ /* Make frequency transition */
+ dest_state = centaur->freq_table[newstate].index & 0xffff;
+ ret = eps_set_state(centaur, cpu, dest_state);
+ if (ret)
+ printk(KERN_ERR "eps: Timeout!\n");
+ return ret;
+}
+
+static int eps_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy,
+ &eps_cpu[policy->cpu]->freq_table[0]);
+}
+
+static int eps_cpu_init(struct cpufreq_policy *policy)
+{
+ unsigned int i;
+ u32 lo, hi;
+ u64 val;
+ u8 current_multiplier, current_voltage;
+ u8 max_multiplier, max_voltage;
+ u8 min_multiplier, min_voltage;
+ u8 brand;
+ u32 fsb;
+ struct eps_cpu_data *centaur;
+ struct cpufreq_frequency_table *f_table;
+ int k, step, voltage;
+ int ret;
+ int states;
+
+ if (policy->cpu != 0)
+ return -ENODEV;
+
+ /* Check brand */
+ printk("eps: Detected VIA ");
+ rdmsr(0x1153, lo, hi);
+ brand = (((lo >> 2) ^ lo) >> 18) & 3;
+ switch(brand) {
+ case EPS_BRAND_C7M:
+ printk("C7-M\n");
+ break;
+ case EPS_BRAND_C7:
+ printk("C7\n");
+ break;
+ case EPS_BRAND_EDEN:
+ printk("Eden\n");
+ break;
+ case EPS_BRAND_C3:
+ printk("C3\n");
+ return -ENODEV;
+ break;
+ }
+ /* Enable Enhanced PowerSaver */
+ rdmsrl(MSR_IA32_MISC_ENABLE, val);
+ if (!(val & 1 << 16)) {
+ val |= 1 << 16;
+ wrmsrl(MSR_IA32_MISC_ENABLE, val);
+ /* Can be locked at 0 */
+ rdmsrl(MSR_IA32_MISC_ENABLE, val);
+ if (!(val & 1 << 16)) {
+ printk("eps: Can't enable Enhanced PowerSaver\n");
+ return -ENODEV;
+ }
+ }
+
+ /* Print voltage and multiplier */
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ current_voltage = lo & 0xff;
+ printk("eps: Current voltage = %dmV\n", current_voltage * 16 + 700);
+ current_multiplier = (lo >> 8) & 0xff;
+ printk("eps: Current multiplier = %d\n", current_multiplier);
+
+ /* Print limits */
+ max_voltage = hi & 0xff;
+ printk("eps: Highest voltage = %dmV\n", max_voltage * 16 + 700);
+ max_multiplier = (hi >> 8) & 0xff;
+ printk("eps: Highest multiplier = %d\n", max_multiplier);
+ min_voltage = (hi >> 16) & 0xff;
+ printk("eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700);
+ min_multiplier = (hi >> 24) & 0xff;
+ printk("eps: Lowest multiplier = %d\n", min_multiplier);
+
+ /* Sanity checks */
+ if (current_multiplier == 0 || max_multiplier == 0
+ || min_multiplier == 0)
+ return -EINVAL;
+ if (current_multiplier > max_multiplier
+ || max_multiplier <= min_multiplier)
+ return -EINVAL;
+ if (current_voltage > 0x1c || max_voltage > 0x1c)
+ return -EINVAL;
+ if (max_voltage < min_voltage)
+ return -EINVAL;
+
+ /* Calc FSB speed */
+ fsb = cpu_khz / current_multiplier;
+ /* Calc number of p-states supported */
+ if (brand == EPS_BRAND_C7M)
+ states = max_multiplier - min_multiplier + 1;
+ else
+ states = 2;
+
+ /* Allocate private data and frequency table for current cpu */
+ centaur = kzalloc(sizeof(struct eps_cpu_data)
+ + (states + 1) * sizeof(struct cpufreq_frequency_table),
+ GFP_KERNEL);
+ if (!centaur)
+ return -ENOMEM;
+ eps_cpu[0] = centaur;
+
+ /* Copy basic values */
+ centaur->fsb = fsb;
+
+ /* Fill frequency and MSR value table */
+ f_table = ¢aur->freq_table[0];
+ if (brand != EPS_BRAND_C7M) {
+ f_table[0].frequency = fsb * min_multiplier;
+ f_table[0].index = (min_multiplier << 8) | min_voltage;
+ f_table[1].frequency = fsb * max_multiplier;
+ f_table[1].index = (max_multiplier << 8) | max_voltage;
+ f_table[2].frequency = CPUFREQ_TABLE_END;
+ } else {
+ k = 0;
+ step = ((max_voltage - min_voltage) * 256)
+ / (max_multiplier - min_multiplier);
+ for (i = min_multiplier; i <= max_multiplier; i++) {
+ voltage = (k * step) / 256 + min_voltage;
+ f_table[k].frequency = fsb * i;
+ f_table[k].index = (i << 8) | voltage;
+ k++;
+ }
+ f_table[k].frequency = CPUFREQ_TABLE_END;
+ }
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */
+ policy->cur = fsb * current_multiplier;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, ¢aur->freq_table[0]);
+ if (ret) {
+ kfree(centaur);
+ return ret;
+ }
+
+ cpufreq_frequency_table_get_attr(¢aur->freq_table[0], policy->cpu);
+ return 0;
+}
+
+static int eps_cpu_exit(struct cpufreq_policy *policy)
+{
+ unsigned int cpu = policy->cpu;
+ struct eps_cpu_data *centaur;
+ u32 lo, hi;
+
+ if (eps_cpu[cpu] == NULL)
+ return -ENODEV;
+ centaur = eps_cpu[cpu];
+
+ /* Get max frequency */
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ /* Set max frequency */
+ eps_set_state(centaur, cpu, hi & 0xffff);
+ /* Bye */
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ kfree(eps_cpu[cpu]);
+ eps_cpu[cpu] = NULL;
+ return 0;
+}
+
+static struct freq_attr* eps_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver eps_driver = {
+ .verify = eps_verify,
+ .target = eps_target,
+ .init = eps_cpu_init,
+ .exit = eps_cpu_exit,
+ .get = eps_get,
+ .name = "e_powersaver",
+ .owner = THIS_MODULE,
+ .attr = eps_attr,
+};
+
+static int __init eps_init(void)
+{
+ struct cpuinfo_x86 *c = cpu_data;
+
+ /* This driver will work only on Centaur C7 processors with
+ * Enhanced SpeedStep/PowerSaver registers */
+ if (c->x86_vendor != X86_VENDOR_CENTAUR
+ || c->x86 != 6 || c->x86_model != 10)
+ return -ENODEV;
+ if (!cpu_has(c, X86_FEATURE_EST))
+ return -ENODEV;
+
+ if (cpufreq_register_driver(&eps_driver))
+ return -EINVAL;
+ return 0;
+}
+
+static void __exit eps_exit(void)
+{
+ cpufreq_unregister_driver(&eps_driver);
+}
+
+MODULE_AUTHOR("Rafa³ Bilski <rafalbilski@interia.pl>");
+MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
+MODULE_LICENSE("GPL");
+
+module_init(eps_init);
+module_exit(eps_exit);
* VIA have currently 3 different versions of Longhaul.
* Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
* It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
- * Version 2 of longhaul is the same as v1, but adds voltage scaling.
- * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C)
- * voltage scaling support has currently been disabled in this driver
- * until we have code that gets it right.
+ * Version 2 of longhaul is backward compatible with v1, but adds
+ * LONGHAUL MSR for purpose of both frequency and voltage scaling.
+ * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C).
* Version 3 of longhaul got renamed to Powersaver and redesigned
- * to use the POWERSAVER MSR at 0x110a.
+ * to use only the POWERSAVER MSR at 0x110a.
* It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
* It's pretty much the same feature wise to longhaul v2, though
* there is provision for scaling FSB too, but this doesn't work
#define CPU_EZRA 3
#define CPU_EZRA_T 4
#define CPU_NEHEMIAH 5
+#define CPU_NEHEMIAH_C 6
/* Flags */
#define USE_ACPI_C3 (1 << 1)
#define USE_NORTHBRIDGE (1 << 2)
+#define USE_VT8235 (1 << 3)
static int cpu_model;
static unsigned int numscales=16;
static struct mV_pos *vrm_mV_table;
static unsigned char *mV_vrm_table;
struct f_msr {
- unsigned char vrm;
+ u8 vrm;
+ u8 pos;
};
static struct f_msr f_msr_table[32];
static struct acpi_processor *pr = NULL;
static struct acpi_processor_cx *cx = NULL;
static u8 longhaul_flags;
+static u8 longhaul_pos;
/* Module parameters */
static int scale_voltage;
-static int ignore_latency;
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
static void do_powersaver(int cx_address, unsigned int clock_ratio_index)
{
union msr_longhaul longhaul;
+ u8 dest_pos;
u32 t;
+ dest_pos = f_msr_table[clock_ratio_index].pos;
+
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+ /* Setup new frequency */
longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf;
longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
- longhaul.bits.EnableSoftBusRatio = 1;
-
- if (can_scale_voltage) {
+ /* Setup new voltage */
+ if (can_scale_voltage)
longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm;
+ /* Sync to timer tick */
+ safe_halt();
+ /* Raise voltage if necessary */
+ if (can_scale_voltage && longhaul_pos < dest_pos) {
longhaul.bits.EnableSoftVID = 1;
+ wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+ /* Change voltage */
+ if (!cx_address) {
+ ACPI_FLUSH_CPU_CACHE();
+ halt();
+ } else {
+ ACPI_FLUSH_CPU_CACHE();
+ /* Invoke C3 */
+ inb(cx_address);
+ /* Dummy op - must do something useless after P_LVL3
+ * read */
+ t = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ }
+ longhaul.bits.EnableSoftVID = 0;
+ wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+ longhaul_pos = dest_pos;
}
- /* Sync to timer tick */
- safe_halt();
/* Change frequency on next halt or sleep */
+ longhaul.bits.EnableSoftBusRatio = 1;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
if (!cx_address) {
ACPI_FLUSH_CPU_CACHE();
- /* Invoke C1 */
halt();
} else {
ACPI_FLUSH_CPU_CACHE();
t = inl(acpi_gbl_FADT.xpm_timer_block.address);
}
/* Disable bus ratio bit */
- local_irq_disable();
- longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
longhaul.bits.EnableSoftBusRatio = 0;
- longhaul.bits.EnableSoftBSEL = 0;
- longhaul.bits.EnableSoftVID = 0;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+
+ /* Reduce voltage if necessary */
+ if (can_scale_voltage && longhaul_pos > dest_pos) {
+ longhaul.bits.EnableSoftVID = 1;
+ wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+ /* Change voltage */
+ if (!cx_address) {
+ ACPI_FLUSH_CPU_CACHE();
+ halt();
+ } else {
+ ACPI_FLUSH_CPU_CACHE();
+ /* Invoke C3 */
+ inb(cx_address);
+ /* Dummy op - must do something useless after P_LVL3
+ * read */
+ t = inl(acpi_gbl_FADT.xpm_timer_block.address);
+ }
+ longhaul.bits.EnableSoftVID = 0;
+ wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
+ longhaul_pos = dest_pos;
+ }
}
/**
/*
* Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
* Software controlled multipliers only.
- *
- * *NB* Until we get voltage scaling working v1 & v2 are the same code.
- * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5b] and Ezra [C5C]
*/
case TYPE_LONGHAUL_V1:
- case TYPE_LONGHAUL_V2:
do_longhaul1(clock_ratio_index);
break;
/*
+ * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C]
+ *
* Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
- * We can scale voltage with this too, but that's currently
- * disabled until we come up with a decent 'match freq to voltage'
- * algorithm.
- * When we add voltage scaling, we will also need to do the
- * voltage/freq setting in order depending on the direction
- * of scaling (like we do in powernow-k7.c)
* Nehemiah can do FSB scaling too, but this has never been proven
* to work in practice.
*/
+ case TYPE_LONGHAUL_V2:
case TYPE_POWERSAVER:
if (longhaul_flags & USE_ACPI_C3) {
/* Don't allow wakeup */
local_irq_restore(flags);
preempt_enable();
+ freqs.new = calc_speed(longhaul_get_cpu_mult());
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
#define ROUNDING 0xf
-static int _guess(int guess, int mult)
-{
- int target;
-
- target = ((mult/10)*guess);
- if (mult%10 != 0)
- target += (guess/2);
- target += ROUNDING/2;
- target &= ~ROUNDING;
- return target;
-}
-
-
static int guess_fsb(int mult)
{
- int speed = (cpu_khz/1000);
+ int speed = cpu_khz / 1000;
int i;
- int speeds[] = { 66, 100, 133, 200 };
-
- speed += ROUNDING/2;
- speed &= ~ROUNDING;
-
- for (i=0; i<4; i++) {
- if (_guess(speeds[i], mult) == speed)
- return speeds[i];
+ int speeds[] = { 666, 1000, 1333, 2000 };
+ int f_max, f_min;
+
+ for (i = 0; i < 4; i++) {
+ f_max = ((speeds[i] * mult) + 50) / 100;
+ f_max += (ROUNDING / 2);
+ f_min = f_max - ROUNDING;
+ if ((speed <= f_max) && (speed >= f_min))
+ return speeds[i] / 10;
}
return 0;
}
static int __init longhaul_get_ranges(void)
{
- unsigned long invalue;
- unsigned int ezra_t_multipliers[32]= {
- 90, 30, 40, 100, 55, 35, 45, 95,
- 50, 70, 80, 60, 120, 75, 85, 65,
- -1, 110, 120, -1, 135, 115, 125, 105,
- 130, 150, 160, 140, -1, 155, -1, 145 };
unsigned int j, k = 0;
- union msr_longhaul longhaul;
- int mult = 0;
+ int mult;
- switch (longhaul_version) {
- case TYPE_LONGHAUL_V1:
- case TYPE_LONGHAUL_V2:
- /* Ugh, Longhaul v1 didn't have the min/max MSRs.
- Assume min=3.0x & max = whatever we booted at. */
+ /* Get current frequency */
+ mult = longhaul_get_cpu_mult();
+ if (mult == -1) {
+ printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n");
+ return -EINVAL;
+ }
+ fsb = guess_fsb(mult);
+ if (fsb == 0) {
+ printk(KERN_INFO PFX "Invalid (reserved) FSB!\n");
+ return -EINVAL;
+ }
+ /* Get max multiplier - as we always did.
+ * Longhaul MSR is usefull only when voltage scaling is enabled.
+ * C3 is booting at max anyway. */
+ maxmult = mult;
+ /* Get min multiplier */
+ switch (cpu_model) {
+ case CPU_NEHEMIAH:
+ minmult = 50;
+ break;
+ case CPU_NEHEMIAH_C:
+ minmult = 40;
+ break;
+ default:
minmult = 30;
- maxmult = mult = longhaul_get_cpu_mult();
break;
-
- case TYPE_POWERSAVER:
- /* Ezra-T */
- if (cpu_model==CPU_EZRA_T) {
- minmult = 30;
- rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
- invalue = longhaul.bits.MaxMHzBR;
- if (longhaul.bits.MaxMHzBR4)
- invalue += 16;
- maxmult = mult = ezra_t_multipliers[invalue];
- break;
- }
-
- /* Nehemiah */
- if (cpu_model==CPU_NEHEMIAH) {
- rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
-
- /*
- * TODO: This code works, but raises a lot of questions.
- * - Some Nehemiah's seem to have broken Min/MaxMHzBR's.
- * We get around this by using a hardcoded multiplier of 4.0x
- * for the minimimum speed, and the speed we booted up at for the max.
- * This is done in longhaul_get_cpu_mult() by reading the EBLCR register.
- * - According to some VIA documentation EBLCR is only
- * in pre-Nehemiah C3s. How this still works is a mystery.
- * We're possibly using something undocumented and unsupported,
- * But it works, so we don't grumble.
- */
- minmult=40;
- maxmult = mult = longhaul_get_cpu_mult();
- break;
- }
}
- fsb = guess_fsb(mult);
dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n",
minmult/10, minmult%10, maxmult/10, maxmult%10);
- if (fsb == 0) {
- printk (KERN_INFO PFX "Invalid (reserved) FSB!\n");
- return -EINVAL;
- }
-
highest_speed = calc_speed(maxmult);
lowest_speed = calc_speed(minmult);
dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb,
union msr_longhaul longhaul;
struct mV_pos minvid, maxvid;
unsigned int j, speed, pos, kHz_step, numvscales;
+ int min_vid_speed;
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
if (!(longhaul.bits.RevisionID & 1)) {
mV_vrm_table = &mV_vrm85[0];
} else {
printk (KERN_INFO PFX "Mobile VRM\n");
+ if (cpu_model < CPU_NEHEMIAH)
+ return;
vrm_mV_table = &mobilevrm_mV[0];
mV_vrm_table = &mV_mobilevrm[0];
}
minvid = vrm_mV_table[longhaul.bits.MinimumVID];
maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
- numvscales = maxvid.pos - minvid.pos + 1;
- kHz_step = (highest_speed - lowest_speed) / numvscales;
if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
return;
}
- printk(KERN_INFO PFX "Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n",
+ /* How many voltage steps */
+ numvscales = maxvid.pos - minvid.pos + 1;
+ printk(KERN_INFO PFX
+ "Max VID=%d.%03d "
+ "Min VID=%d.%03d, "
+ "%d possible voltage scales\n",
maxvid.mV/1000, maxvid.mV%1000,
minvid.mV/1000, minvid.mV%1000,
numvscales);
+ /* Calculate max frequency at min voltage */
+ j = longhaul.bits.MinMHzBR;
+ if (longhaul.bits.MinMHzBR4)
+ j += 16;
+ min_vid_speed = eblcr_table[j];
+ if (min_vid_speed == -1)
+ return;
+ switch (longhaul.bits.MinMHzFSB) {
+ case 0:
+ min_vid_speed *= 13333;
+ break;
+ case 1:
+ min_vid_speed *= 10000;
+ break;
+ case 3:
+ min_vid_speed *= 6666;
+ break;
+ default:
+ return;
+ break;
+ }
+ if (min_vid_speed >= highest_speed)
+ return;
+ /* Calculate kHz for one voltage step */
+ kHz_step = (highest_speed - min_vid_speed) / numvscales;
+
+
j = 0;
while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
speed = longhaul_table[j].frequency;
- pos = (speed - lowest_speed) / kHz_step + minvid.pos;
+ if (speed > min_vid_speed)
+ pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
+ else
+ pos = minvid.pos;
f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos];
+ f_msr_table[longhaul_table[j].index].pos = pos;
j++;
}
+ longhaul_pos = maxvid.pos;
can_scale_voltage = 1;
+ printk(KERN_INFO PFX "Voltage scaling enabled. "
+ "Use of \"conservative\" governor is highly recommended.\n");
}
if (dev != NULL) {
/* Enable access to port 0x22 */
pci_read_config_byte(dev, reg, &pci_cmd);
- if ( !(pci_cmd & 1<<7) ) {
+ if (!(pci_cmd & 1<<7)) {
pci_cmd |= 1<<7;
pci_write_config_byte(dev, reg, pci_cmd);
+ pci_read_config_byte(dev, reg, &pci_cmd);
+ if (!(pci_cmd & 1<<7)) {
+ printk(KERN_ERR PFX
+ "Can't enable access to port 0x22.\n");
+ return 0;
+ }
}
return 1;
}
return 0;
}
+static int longhaul_setup_vt8235(void)
+{
+ struct pci_dev *dev;
+ u8 pci_cmd;
+
+ /* Find VT8235 southbridge */
+ dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
+ if (dev != NULL) {
+ /* Set transition time to max */
+ pci_read_config_byte(dev, 0xec, &pci_cmd);
+ pci_cmd &= ~(1 << 2);
+ pci_write_config_byte(dev, 0xec, pci_cmd);
+ pci_read_config_byte(dev, 0xe4, &pci_cmd);
+ pci_cmd &= ~(1 << 7);
+ pci_write_config_byte(dev, 0xe4, pci_cmd);
+ pci_read_config_byte(dev, 0xe5, &pci_cmd);
+ pci_cmd |= 1 << 7;
+ pci_write_config_byte(dev, 0xe5, pci_cmd);
+ return 1;
+ }
+ return 0;
+}
+
static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = cpu_data;
char *cpuname=NULL;
int ret;
+ u32 lo, hi;
+ int vt8235_present;
/* Check what we have on this motherboard */
switch (c->x86_model) {
break;
case 7:
- longhaul_version = TYPE_LONGHAUL_V1;
switch (c->x86_mask) {
case 0:
+ longhaul_version = TYPE_LONGHAUL_V1;
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";
- /* Note, this is not a typo, early Samuel2's had Samuel1 ratios. */
- memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
- memcpy (eblcr_table, samuel2_eblcr, sizeof(samuel2_eblcr));
+ /* Note, this is not a typo, early Samuel2's had
+ * Samuel1 ratios. */
+ memcpy(clock_ratio, samuel1_clock_ratio,
+ sizeof(samuel1_clock_ratio));
+ memcpy(eblcr_table, samuel2_eblcr,
+ sizeof(samuel2_eblcr));
break;
case 1 ... 15:
+ longhaul_version = TYPE_LONGHAUL_V2;
if (c->x86_mask < 8) {
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";
cpu_model = CPU_EZRA;
cpuname = "C3 'Ezra' [C5C]";
}
- memcpy (clock_ratio, ezra_clock_ratio, sizeof(ezra_clock_ratio));
- memcpy (eblcr_table, ezra_eblcr, sizeof(ezra_eblcr));
+ memcpy(clock_ratio, ezra_clock_ratio,
+ sizeof(ezra_clock_ratio));
+ memcpy(eblcr_table, ezra_eblcr,
+ sizeof(ezra_eblcr));
break;
}
break;
break;
case 9:
- cpu_model = CPU_NEHEMIAH;
longhaul_version = TYPE_POWERSAVER;
- numscales=32;
+ numscales = 32;
+ memcpy(clock_ratio,
+ nehemiah_clock_ratio,
+ sizeof(nehemiah_clock_ratio));
+ memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr));
switch (c->x86_mask) {
case 0 ... 1:
- cpuname = "C3 'Nehemiah A' [C5N]";
- memcpy (clock_ratio, nehemiah_a_clock_ratio, sizeof(nehemiah_a_clock_ratio));
- memcpy (eblcr_table, nehemiah_a_eblcr, sizeof(nehemiah_a_eblcr));
+ cpu_model = CPU_NEHEMIAH;
+ cpuname = "C3 'Nehemiah A' [C5XLOE]";
break;
case 2 ... 4:
- cpuname = "C3 'Nehemiah B' [C5N]";
- memcpy (clock_ratio, nehemiah_b_clock_ratio, sizeof(nehemiah_b_clock_ratio));
- memcpy (eblcr_table, nehemiah_b_eblcr, sizeof(nehemiah_b_eblcr));
+ cpu_model = CPU_NEHEMIAH;
+ cpuname = "C3 'Nehemiah B' [C5XLOH]";
break;
case 5 ... 15:
- cpuname = "C3 'Nehemiah C' [C5N]";
- memcpy (clock_ratio, nehemiah_c_clock_ratio, sizeof(nehemiah_c_clock_ratio));
- memcpy (eblcr_table, nehemiah_c_eblcr, sizeof(nehemiah_c_eblcr));
+ cpu_model = CPU_NEHEMIAH_C;
+ cpuname = "C3 'Nehemiah C' [C5P]";
break;
}
break;
cpuname = "Unknown";
break;
}
+ /* Check Longhaul ver. 2 */
+ if (longhaul_version == TYPE_LONGHAUL_V2) {
+ rdmsr(MSR_VIA_LONGHAUL, lo, hi);
+ if (lo == 0 && hi == 0)
+ /* Looks like MSR isn't present */
+ longhaul_version = TYPE_LONGHAUL_V1;
+ }
printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname);
switch (longhaul_version) {
break;
};
+ /* Doesn't hurt */
+ vt8235_present = longhaul_setup_vt8235();
+
/* Find ACPI data for processor */
- acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
- &longhaul_walk_callback, NULL, (void *)&pr);
+ acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
+ ACPI_UINT32_MAX, &longhaul_walk_callback,
+ NULL, (void *)&pr);
/* Check ACPI support for C3 state */
- if ((pr != NULL) && (longhaul_version == TYPE_POWERSAVER)) {
+ if (pr != NULL && longhaul_version != TYPE_LONGHAUL_V1) {
cx = &pr->power.states[ACPI_STATE_C3];
- if (cx->address > 0 &&
- (cx->latency <= 1000 || ignore_latency != 0) ) {
+ if (cx->address > 0 && cx->latency <= 1000) {
longhaul_flags |= USE_ACPI_C3;
goto print_support_type;
}
longhaul_flags |= USE_NORTHBRIDGE;
goto print_support_type;
}
-
- /* No ACPI C3 or we can't use it */
+ /* Use VT8235 southbridge if present */
+ if (longhaul_version == TYPE_POWERSAVER && vt8235_present) {
+ longhaul_flags |= USE_VT8235;
+ goto print_support_type;
+ }
/* Check ACPI support for bus master arbiter disable */
if ((pr == NULL) || !(pr->flags.bm_control)) {
printk(KERN_ERR PFX
}
print_support_type:
- if (!(longhaul_flags & USE_NORTHBRIDGE)) {
- printk (KERN_INFO PFX "Using ACPI support.\n");
- } else {
+ if (longhaul_flags & USE_NORTHBRIDGE)
printk (KERN_INFO PFX "Using northbridge support.\n");
- }
+ else if (longhaul_flags & USE_VT8235)
+ printk (KERN_INFO PFX "Using VT8235 support.\n");
+ else
+ printk (KERN_INFO PFX "Using ACPI support.\n");
ret = longhaul_get_ranges();
if (ret != 0)
return ret;
- if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) &&
- (scale_voltage != 0))
+ if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
longhaul_setup_voltagescaling();
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
module_param (scale_voltage, int, 0644);
MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
-module_param(ignore_latency, int, 0644);
-MODULE_PARM_DESC(ignore_latency, "Skip ACPI C3 latency test");
MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
/*
* VIA C3 Nehemiah */
-static int __initdata nehemiah_a_clock_ratio[32] = {
+static int __initdata nehemiah_clock_ratio[32] = {
100, /* 0000 -> 10.0x */
160, /* 0001 -> 16.0x */
- -1, /* 0010 -> RESERVED */
- 90, /* 0011 -> 9.0x */
- 95, /* 0100 -> 9.5x */
- -1, /* 0101 -> RESERVED */
- -1, /* 0110 -> RESERVED */
- 55, /* 0111 -> 5.5x */
- 60, /* 1000 -> 6.0x */
- 70, /* 1001 -> 7.0x */
- 80, /* 1010 -> 8.0x */
- 50, /* 1011 -> 5.0x */
- 65, /* 1100 -> 6.5x */
- 75, /* 1101 -> 7.5x */
- 85, /* 1110 -> 8.5x */
- 120, /* 1111 -> 12.0x */
- 100, /* 0000 -> 10.0x */
- -1, /* 0001 -> RESERVED */
- 120, /* 0010 -> 12.0x */
- 90, /* 0011 -> 9.0x */
- 105, /* 0100 -> 10.5x */
- 115, /* 0101 -> 11.5x */
- 125, /* 0110 -> 12.5x */
- 135, /* 0111 -> 13.5x */
- 140, /* 1000 -> 14.0x */
- 150, /* 1001 -> 15.0x */
- 160, /* 1010 -> 16.0x */
- 130, /* 1011 -> 13.0x */
- 145, /* 1100 -> 14.5x */
- 155, /* 1101 -> 15.5x */
- -1, /* 1110 -> RESERVED (13.0x) */
- 120, /* 1111 -> 12.0x */
-};
-
-static int __initdata nehemiah_b_clock_ratio[32] = {
- 100, /* 0000 -> 10.0x */
- 160, /* 0001 -> 16.0x */
- -1, /* 0010 -> RESERVED */
- 90, /* 0011 -> 9.0x */
- 95, /* 0100 -> 9.5x */
- -1, /* 0101 -> RESERVED */
- -1, /* 0110 -> RESERVED */
- 55, /* 0111 -> 5.5x */
- 60, /* 1000 -> 6.0x */
- 70, /* 1001 -> 7.0x */
- 80, /* 1010 -> 8.0x */
- 50, /* 1011 -> 5.0x */
- 65, /* 1100 -> 6.5x */
- 75, /* 1101 -> 7.5x */
- 85, /* 1110 -> 8.5x */
- 120, /* 1111 -> 12.0x */
- 100, /* 0000 -> 10.0x */
- 110, /* 0001 -> 11.0x */
- 120, /* 0010 -> 12.0x */
- 90, /* 0011 -> 9.0x */
- 105, /* 0100 -> 10.5x */
- 115, /* 0101 -> 11.5x */
- 125, /* 0110 -> 12.5x */
- 135, /* 0111 -> 13.5x */
- 140, /* 1000 -> 14.0x */
- 150, /* 1001 -> 15.0x */
- 160, /* 1010 -> 16.0x */
- 130, /* 1011 -> 13.0x */
- 145, /* 1100 -> 14.5x */
- 155, /* 1101 -> 15.5x */
- -1, /* 1110 -> RESERVED (13.0x) */
- 120, /* 1111 -> 12.0x */
-};
-
-static int __initdata nehemiah_c_clock_ratio[32] = {
- 100, /* 0000 -> 10.0x */
- 160, /* 0001 -> 16.0x */
- 40, /* 0010 -> RESERVED */
+ 40, /* 0010 -> 4.0x */
90, /* 0011 -> 9.0x */
95, /* 0100 -> 9.5x */
-1, /* 0101 -> RESERVED */
- 45, /* 0110 -> RESERVED */
+ 45, /* 0110 -> 4.5x */
55, /* 0111 -> 5.5x */
60, /* 1000 -> 6.0x */
70, /* 1001 -> 7.0x */
120, /* 1111 -> 12.0x */
};
-static int __initdata nehemiah_a_eblcr[32] = {
- 50, /* 0000 -> 5.0x */
- 160, /* 0001 -> 16.0x */
- -1, /* 0010 -> RESERVED */
- 100, /* 0011 -> 10.0x */
- 55, /* 0100 -> 5.5x */
- -1, /* 0101 -> RESERVED */
- -1, /* 0110 -> RESERVED */
- 95, /* 0111 -> 9.5x */
- 90, /* 1000 -> 9.0x */
- 70, /* 1001 -> 7.0x */
- 80, /* 1010 -> 8.0x */
- 60, /* 1011 -> 6.0x */
- 120, /* 1100 -> 12.0x */
- 75, /* 1101 -> 7.5x */
- 85, /* 1110 -> 8.5x */
- 65, /* 1111 -> 6.5x */
- 90, /* 0000 -> 9.0x */
- -1, /* 0001 -> RESERVED */
- 120, /* 0010 -> 12.0x */
- 100, /* 0011 -> 10.0x */
- 135, /* 0100 -> 13.5x */
- 115, /* 0101 -> 11.5x */
- 125, /* 0110 -> 12.5x */
- 105, /* 0111 -> 10.5x */
- 130, /* 1000 -> 13.0x */
- 150, /* 1001 -> 15.0x */
- 160, /* 1010 -> 16.0x */
- 140, /* 1011 -> 14.0x */
- 120, /* 1100 -> 12.0x */
- 155, /* 1101 -> 15.5x */
- -1, /* 1110 -> RESERVED (13.0x) */
- 145 /* 1111 -> 14.5x */
- /* end of table */
-};
-static int __initdata nehemiah_b_eblcr[32] = {
- 50, /* 0000 -> 5.0x */
- 160, /* 0001 -> 16.0x */
- -1, /* 0010 -> RESERVED */
- 100, /* 0011 -> 10.0x */
- 55, /* 0100 -> 5.5x */
- -1, /* 0101 -> RESERVED */
- -1, /* 0110 -> RESERVED */
- 95, /* 0111 -> 9.5x */
- 90, /* 1000 -> 9.0x */
- 70, /* 1001 -> 7.0x */
- 80, /* 1010 -> 8.0x */
- 60, /* 1011 -> 6.0x */
- 120, /* 1100 -> 12.0x */
- 75, /* 1101 -> 7.5x */
- 85, /* 1110 -> 8.5x */
- 65, /* 1111 -> 6.5x */
- 90, /* 0000 -> 9.0x */
- 110, /* 0001 -> 11.0x */
- 120, /* 0010 -> 12.0x */
- 100, /* 0011 -> 10.0x */
- 135, /* 0100 -> 13.5x */
- 115, /* 0101 -> 11.5x */
- 125, /* 0110 -> 12.5x */
- 105, /* 0111 -> 10.5x */
- 130, /* 1000 -> 13.0x */
- 150, /* 1001 -> 15.0x */
- 160, /* 1010 -> 16.0x */
- 140, /* 1011 -> 14.0x */
- 120, /* 1100 -> 12.0x */
- 155, /* 1101 -> 15.5x */
- -1, /* 1110 -> RESERVED (13.0x) */
- 145 /* 1111 -> 14.5x */
- /* end of table */
-};
-static int __initdata nehemiah_c_eblcr[32] = {
+static int __initdata nehemiah_eblcr[32] = {
50, /* 0000 -> 5.0x */
160, /* 0001 -> 16.0x */
- 40, /* 0010 -> RESERVED */
+ 40, /* 0010 -> 4.0x */
100, /* 0011 -> 10.0x */
55, /* 0100 -> 5.5x */
-1, /* 0101 -> RESERVED */
- 45, /* 0110 -> RESERVED */
+ 45, /* 0110 -> 4.5x */
95, /* 0111 -> 9.5x */
90, /* 1000 -> 9.0x */
70, /* 1001 -> 7.0x */
155, /* 1101 -> 15.5x */
-1, /* 1110 -> RESERVED (13.0x) */
145 /* 1111 -> 14.5x */
- /* end of table */
};
/*
if (query_current_values_with_pending_wait(data))
goto out;
- khz = find_khz_freq_from_fid(data->currfid);
+ if (cpu_family == CPU_HW_PSTATE)
+ khz = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+ else
+ khz = find_khz_freq_from_fid(data->currfid);
+
out:
set_cpus_allowed(current, oldmask);
if CPU_FREQ
config CPU_FREQ_TABLE
- def_tristate m
+ tristate
config CPU_FREQ_DEBUG
bool "Enable CPUfreq debugging"
static struct cpufreq_policy *cpufreq_cpu_data[NR_CPUS];
static DEFINE_SPINLOCK(cpufreq_driver_lock);
+/*
+ * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure
+ * all cpufreq/hotplug/workqueue/etc related lock issues.
+ *
+ * The rules for this semaphore:
+ * - Any routine that wants to read from the policy structure will
+ * do a down_read on this semaphore.
+ * - Any routine that will write to the policy structure and/or may take away
+ * the policy altogether (eg. CPU hotplug), will hold this lock in write
+ * mode before doing so.
+ *
+ * Additional rules:
+ * - All holders of the lock should check to make sure that the CPU they
+ * are concerned with are online after they get the lock.
+ * - Governor routines that can be called in cpufreq hotplug path should not
+ * take this sem as top level hotplug notifier handler takes this.
+ */
+static DEFINE_PER_CPU(int, policy_cpu);
+static DEFINE_PER_CPU(struct rw_semaphore, cpu_policy_rwsem);
+
+#define lock_policy_rwsem(mode, cpu) \
+int lock_policy_rwsem_##mode \
+(int cpu) \
+{ \
+ int policy_cpu = per_cpu(policy_cpu, cpu); \
+ BUG_ON(policy_cpu == -1); \
+ down_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \
+ if (unlikely(!cpu_online(cpu))) { \
+ up_##mode(&per_cpu(cpu_policy_rwsem, policy_cpu)); \
+ return -1; \
+ } \
+ \
+ return 0; \
+}
+
+lock_policy_rwsem(read, cpu);
+EXPORT_SYMBOL_GPL(lock_policy_rwsem_read);
+
+lock_policy_rwsem(write, cpu);
+EXPORT_SYMBOL_GPL(lock_policy_rwsem_write);
+
+void unlock_policy_rwsem_read(int cpu)
+{
+ int policy_cpu = per_cpu(policy_cpu, cpu);
+ BUG_ON(policy_cpu == -1);
+ up_read(&per_cpu(cpu_policy_rwsem, policy_cpu));
+}
+EXPORT_SYMBOL_GPL(unlock_policy_rwsem_read);
+
+void unlock_policy_rwsem_write(int cpu)
+{
+ int policy_cpu = per_cpu(policy_cpu, cpu);
+ BUG_ON(policy_cpu == -1);
+ up_write(&per_cpu(cpu_policy_rwsem, policy_cpu));
+}
+EXPORT_SYMBOL_GPL(unlock_policy_rwsem_write);
+
+
/* internal prototypes */
static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event);
+static unsigned int __cpufreq_get(unsigned int cpu);
static void handle_update(struct work_struct *work);
/**
if (ret != 1) \
return -EINVAL; \
\
- lock_cpu_hotplug(); \
- mutex_lock(&policy->lock); \
ret = __cpufreq_set_policy(policy, &new_policy); \
policy->user_policy.object = policy->object; \
- mutex_unlock(&policy->lock); \
- unlock_cpu_hotplug(); \
\
return ret ? ret : count; \
}
static ssize_t show_cpuinfo_cur_freq (struct cpufreq_policy * policy,
char *buf)
{
- unsigned int cur_freq = cpufreq_get(policy->cpu);
+ unsigned int cur_freq = __cpufreq_get(policy->cpu);
if (!cur_freq)
return sprintf(buf, "<unknown>");
return sprintf(buf, "%u\n", cur_freq);
&new_policy.governor))
return -EINVAL;
- lock_cpu_hotplug();
-
/* Do not use cpufreq_set_policy here or the user_policy.max
will be wrongly overridden */
- mutex_lock(&policy->lock);
ret = __cpufreq_set_policy(policy, &new_policy);
policy->user_policy.policy = policy->policy;
policy->user_policy.governor = policy->governor;
- mutex_unlock(&policy->lock);
-
- unlock_cpu_hotplug();
if (ret)
return ret;
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
return -EINVAL;
+
+ if (lock_policy_rwsem_read(policy->cpu) < 0)
+ return -EINVAL;
+
if (fattr->show)
ret = fattr->show(policy, buf);
else
ret = -EIO;
+ unlock_policy_rwsem_read(policy->cpu);
+
cpufreq_cpu_put(policy);
return ret;
}
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
return -EINVAL;
+
+ if (lock_policy_rwsem_write(policy->cpu) < 0)
+ return -EINVAL;
+
if (fattr->store)
ret = fattr->store(policy, buf, count);
else
ret = -EIO;
+ unlock_policy_rwsem_write(policy->cpu);
+
cpufreq_cpu_put(policy);
return ret;
}
policy->cpu = cpu;
policy->cpus = cpumask_of_cpu(cpu);
- mutex_init(&policy->lock);
- mutex_lock(&policy->lock);
+ /* Initially set CPU itself as the policy_cpu */
+ per_cpu(policy_cpu, cpu) = cpu;
+ lock_policy_rwsem_write(cpu);
+
init_completion(&policy->kobj_unregister);
INIT_WORK(&policy->update, handle_update);
ret = cpufreq_driver->init(policy);
if (ret) {
dprintk("initialization failed\n");
- mutex_unlock(&policy->lock);
+ unlock_policy_rwsem_write(cpu);
goto err_out;
}
*/
managed_policy = cpufreq_cpu_get(j);
if (unlikely(managed_policy)) {
+
+ /* Set proper policy_cpu */
+ unlock_policy_rwsem_write(cpu);
+ per_cpu(policy_cpu, cpu) = managed_policy->cpu;
+
+ if (lock_policy_rwsem_write(cpu) < 0)
+ goto err_out_driver_exit;
+
spin_lock_irqsave(&cpufreq_driver_lock, flags);
managed_policy->cpus = policy->cpus;
cpufreq_cpu_data[cpu] = managed_policy;
&managed_policy->kobj,
"cpufreq");
if (ret) {
- mutex_unlock(&policy->lock);
+ unlock_policy_rwsem_write(cpu);
goto err_out_driver_exit;
}
cpufreq_debug_enable_ratelimit();
- mutex_unlock(&policy->lock);
ret = 0;
+ unlock_policy_rwsem_write(cpu);
goto err_out_driver_exit; /* call driver->exit() */
}
}
ret = kobject_register(&policy->kobj);
if (ret) {
- mutex_unlock(&policy->lock);
+ unlock_policy_rwsem_write(cpu);
goto err_out_driver_exit;
}
/* set up files for this cpu device */
sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
spin_lock_irqsave(&cpufreq_driver_lock, flags);
- for_each_cpu_mask(j, policy->cpus)
+ for_each_cpu_mask(j, policy->cpus) {
cpufreq_cpu_data[j] = policy;
+ per_cpu(policy_cpu, j) = policy->cpu;
+ }
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
/* symlink affected CPUs */
ret = sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
"cpufreq");
if (ret) {
- mutex_unlock(&policy->lock);
+ unlock_policy_rwsem_write(cpu);
goto err_out_unregister;
}
}
policy->governor = NULL; /* to assure that the starting sequence is
* run in cpufreq_set_policy */
- mutex_unlock(&policy->lock);
+ unlock_policy_rwsem_write(cpu);
/* set default policy */
ret = cpufreq_set_policy(&new_policy);
/**
- * cpufreq_remove_dev - remove a CPU device
+ * __cpufreq_remove_dev - remove a CPU device
*
* Removes the cpufreq interface for a CPU device.
+ * Caller should already have policy_rwsem in write mode for this CPU.
+ * This routine frees the rwsem before returning.
*/
-static int cpufreq_remove_dev (struct sys_device * sys_dev)
+static int __cpufreq_remove_dev (struct sys_device * sys_dev)
{
unsigned int cpu = sys_dev->id;
unsigned long flags;
if (!data) {
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
cpufreq_debug_enable_ratelimit();
+ unlock_policy_rwsem_write(cpu);
return -EINVAL;
}
cpufreq_cpu_data[cpu] = NULL;
sysfs_remove_link(&sys_dev->kobj, "cpufreq");
cpufreq_cpu_put(data);
cpufreq_debug_enable_ratelimit();
+ unlock_policy_rwsem_write(cpu);
return 0;
}
#endif
if (!kobject_get(&data->kobj)) {
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
cpufreq_debug_enable_ratelimit();
+ unlock_policy_rwsem_write(cpu);
return -EFAULT;
}
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
#endif
- mutex_lock(&data->lock);
if (cpufreq_driver->target)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
- mutex_unlock(&data->lock);
+
+ unlock_policy_rwsem_write(cpu);
kobject_unregister(&data->kobj);
}
+static int cpufreq_remove_dev (struct sys_device * sys_dev)
+{
+ unsigned int cpu = sys_dev->id;
+ int retval;
+ if (unlikely(lock_policy_rwsem_write(cpu)))
+ BUG();
+
+ retval = __cpufreq_remove_dev(sys_dev);
+ return retval;
+}
+
+
static void handle_update(struct work_struct *work)
{
struct cpufreq_policy *policy =
unsigned int ret_freq = 0;
if (policy) {
- mutex_lock(&policy->lock);
+ if (unlikely(lock_policy_rwsem_read(cpu)))
+ return ret_freq;
+
ret_freq = policy->cur;
- mutex_unlock(&policy->lock);
+
+ unlock_policy_rwsem_read(cpu);
cpufreq_cpu_put(policy);
}
EXPORT_SYMBOL(cpufreq_quick_get);
-/**
- * cpufreq_get - get the current CPU frequency (in kHz)
- * @cpu: CPU number
- *
- * Get the CPU current (static) CPU frequency
- */
-unsigned int cpufreq_get(unsigned int cpu)
+static unsigned int __cpufreq_get(unsigned int cpu)
{
- struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+ struct cpufreq_policy *policy = cpufreq_cpu_data[cpu];
unsigned int ret_freq = 0;
- if (!policy)
- return 0;
-
if (!cpufreq_driver->get)
- goto out;
-
- mutex_lock(&policy->lock);
+ return (ret_freq);
ret_freq = cpufreq_driver->get(cpu);
}
}
- mutex_unlock(&policy->lock);
+ return (ret_freq);
+}
-out:
- cpufreq_cpu_put(policy);
+/**
+ * cpufreq_get - get the current CPU frequency (in kHz)
+ * @cpu: CPU number
+ *
+ * Get the CPU current (static) CPU frequency
+ */
+unsigned int cpufreq_get(unsigned int cpu)
+{
+ unsigned int ret_freq = 0;
+ struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+
+ if (!policy)
+ goto out;
+
+ if (unlikely(lock_policy_rwsem_read(cpu)))
+ goto out_policy;
+
+ ret_freq = __cpufreq_get(cpu);
+ unlock_policy_rwsem_read(cpu);
+
+out_policy:
+ cpufreq_cpu_put(policy);
+out:
return (ret_freq);
}
EXPORT_SYMBOL(cpufreq_get);
*********************************************************************/
-/* Must be called with lock_cpu_hotplug held */
int __cpufreq_driver_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
if (!policy)
return -EINVAL;
- lock_cpu_hotplug();
- mutex_lock(&policy->lock);
+ if (unlikely(lock_policy_rwsem_write(policy->cpu)))
+ return -EINVAL;
ret = __cpufreq_driver_target(policy, target_freq, relation);
- mutex_unlock(&policy->lock);
- unlock_cpu_hotplug();
+ unlock_policy_rwsem_write(policy->cpu);
cpufreq_cpu_put(policy);
return ret;
}
EXPORT_SYMBOL_GPL(cpufreq_driver_target);
-int cpufreq_driver_getavg(struct cpufreq_policy *policy)
+int __cpufreq_driver_getavg(struct cpufreq_policy *policy)
{
int ret = 0;
if (!policy)
return -EINVAL;
- mutex_lock(&policy->lock);
-
if (cpu_online(policy->cpu) && cpufreq_driver->getavg)
ret = cpufreq_driver->getavg(policy->cpu);
- mutex_unlock(&policy->lock);
-
cpufreq_cpu_put(policy);
return ret;
}
-EXPORT_SYMBOL_GPL(cpufreq_driver_getavg);
+EXPORT_SYMBOL_GPL(__cpufreq_driver_getavg);
/*
- * Locking: Must be called with the lock_cpu_hotplug() lock held
* when "event" is CPUFREQ_GOV_LIMITS
*/
if (!cpu_policy)
return -EINVAL;
- mutex_lock(&cpu_policy->lock);
memcpy(policy, cpu_policy, sizeof(struct cpufreq_policy));
- mutex_unlock(&cpu_policy->lock);
cpufreq_cpu_put(cpu_policy);
return 0;
/*
* data : current policy.
* policy : policy to be set.
- * Locking: Must be called with the lock_cpu_hotplug() lock held
*/
static int __cpufreq_set_policy(struct cpufreq_policy *data,
struct cpufreq_policy *policy)
if (!data)
return -EINVAL;
- lock_cpu_hotplug();
+ if (unlikely(lock_policy_rwsem_write(policy->cpu)))
+ return -EINVAL;
- /* lock this CPU */
- mutex_lock(&data->lock);
ret = __cpufreq_set_policy(data, policy);
data->user_policy.min = data->min;
data->user_policy.policy = data->policy;
data->user_policy.governor = data->governor;
- mutex_unlock(&data->lock);
+ unlock_policy_rwsem_write(policy->cpu);
- unlock_cpu_hotplug();
cpufreq_cpu_put(data);
return ret;
if (!data)
return -ENODEV;
- lock_cpu_hotplug();
- mutex_lock(&data->lock);
+ if (unlikely(lock_policy_rwsem_write(cpu)))
+ return -EINVAL;
dprintk("updating policy for CPU %u\n", cpu);
memcpy(&policy, data, sizeof(struct cpufreq_policy));
ret = __cpufreq_set_policy(data, &policy);
- mutex_unlock(&data->lock);
- unlock_cpu_hotplug();
+ unlock_policy_rwsem_write(cpu);
+
cpufreq_cpu_put(data);
return ret;
}
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
- struct cpufreq_policy *policy;
struct sys_device *sys_dev;
+ struct cpufreq_policy *policy;
sys_dev = get_cpu_sysdev(cpu);
-
if (sys_dev) {
switch (action) {
case CPU_ONLINE:
cpufreq_add_dev(sys_dev);
break;
case CPU_DOWN_PREPARE:
- /*
- * We attempt to put this cpu in lowest frequency
- * possible before going down. This will permit
- * hardware-managed P-State to switch other related
- * threads to min or higher speeds if possible.
- */
+ if (unlikely(lock_policy_rwsem_write(cpu)))
+ BUG();
+
policy = cpufreq_cpu_data[cpu];
if (policy) {
- cpufreq_driver_target(policy, policy->min,
+ __cpufreq_driver_target(policy, policy->min,
CPUFREQ_RELATION_H);
}
+ __cpufreq_remove_dev(sys_dev);
break;
- case CPU_DEAD:
- cpufreq_remove_dev(sys_dev);
+ case CPU_DOWN_FAILED:
+ cpufreq_add_dev(sys_dev);
break;
}
}
return 0;
}
EXPORT_SYMBOL_GPL(cpufreq_unregister_driver);
+
+static int __init cpufreq_core_init(void)
+{
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ per_cpu(policy_cpu, cpu) = -1;
+ init_rwsem(&per_cpu(cpu_policy_rwsem, cpu));
+ }
+ return 0;
+}
+
+core_initcall(cpufreq_core_init);
static void do_dbs_timer(struct work_struct *work)
{
int i;
- lock_cpu_hotplug();
mutex_lock(&dbs_mutex);
for_each_online_cpu(i)
dbs_check_cpu(i);
schedule_delayed_work(&dbs_work,
usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
mutex_unlock(&dbs_mutex);
- unlock_cpu_hotplug();
}
static inline void dbs_timer_init(void)
static void do_dbs_timer(struct work_struct *work);
/* Sampling types */
-enum dbs_sample {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE};
+enum {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE};
struct cpu_dbs_info_s {
cputime64_t prev_cpu_idle;
cputime64_t prev_cpu_wall;
struct cpufreq_policy *cur_policy;
struct delayed_work work;
- enum dbs_sample sample_type;
- unsigned int enable;
struct cpufreq_frequency_table *freq_table;
unsigned int freq_lo;
unsigned int freq_lo_jiffies;
unsigned int freq_hi_jiffies;
+ int cpu;
+ unsigned int enable:1,
+ sample_type:1;
};
static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
if (load < (dbs_tuners_ins.up_threshold - 10)) {
unsigned int freq_next, freq_cur;
- freq_cur = cpufreq_driver_getavg(policy);
+ freq_cur = __cpufreq_driver_getavg(policy);
if (!freq_cur)
freq_cur = policy->cur;
static void do_dbs_timer(struct work_struct *work)
{
- unsigned int cpu = smp_processor_id();
- struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu);
- enum dbs_sample sample_type = dbs_info->sample_type;
+ struct cpu_dbs_info_s *dbs_info =
+ container_of(work, struct cpu_dbs_info_s, work.work);
+ unsigned int cpu = dbs_info->cpu;
+ int sample_type = dbs_info->sample_type;
+
/* We want all CPUs to do sampling nearly on same jiffy */
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
- if (!dbs_info->enable)
+ if (lock_policy_rwsem_write(cpu) < 0)
+ return;
+
+ if (!dbs_info->enable) {
+ unlock_policy_rwsem_write(cpu);
return;
+ }
+
/* Common NORMAL_SAMPLE setup */
dbs_info->sample_type = DBS_NORMAL_SAMPLE;
if (!dbs_tuners_ins.powersave_bias ||
sample_type == DBS_NORMAL_SAMPLE) {
- lock_cpu_hotplug();
dbs_check_cpu(dbs_info);
- unlock_cpu_hotplug();
if (dbs_info->freq_lo) {
/* Setup timer for SUB_SAMPLE */
dbs_info->sample_type = DBS_SUB_SAMPLE;
CPUFREQ_RELATION_H);
}
queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
+ unlock_policy_rwsem_write(cpu);
}
-static inline void dbs_timer_init(unsigned int cpu)
+static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info)
{
- struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu);
/* We want all CPUs to do sampling nearly on same jiffy */
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
+ dbs_info->enable = 1;
ondemand_powersave_bias_init();
- INIT_DELAYED_WORK_NAR(&dbs_info->work, do_dbs_timer);
dbs_info->sample_type = DBS_NORMAL_SAMPLE;
- queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
+ INIT_DELAYED_WORK_NAR(&dbs_info->work, do_dbs_timer);
+ queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work,
+ delay);
}
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
{
dbs_info->enable = 0;
cancel_delayed_work(&dbs_info->work);
- flush_workqueue(kondemand_wq);
}
static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
mutex_lock(&dbs_mutex);
dbs_enable++;
- if (dbs_enable == 1) {
- kondemand_wq = create_workqueue("kondemand");
- if (!kondemand_wq) {
- printk(KERN_ERR
- "Creation of kondemand failed\n");
- dbs_enable--;
- mutex_unlock(&dbs_mutex);
- return -ENOSPC;
- }
- }
rc = sysfs_create_group(&policy->kobj, &dbs_attr_group);
if (rc) {
- if (dbs_enable == 1)
- destroy_workqueue(kondemand_wq);
dbs_enable--;
mutex_unlock(&dbs_mutex);
return rc;
j_dbs_info->prev_cpu_idle = get_cpu_idle_time(j);
j_dbs_info->prev_cpu_wall = get_jiffies_64();
}
- this_dbs_info->enable = 1;
+ this_dbs_info->cpu = cpu;
/*
* Start the timerschedule work, when this governor
* is used for first time
dbs_tuners_ins.sampling_rate = def_sampling_rate;
}
- dbs_timer_init(policy->cpu);
+ dbs_timer_init(this_dbs_info);
mutex_unlock(&dbs_mutex);
break;
dbs_timer_exit(this_dbs_info);
sysfs_remove_group(&policy->kobj, &dbs_attr_group);
dbs_enable--;
- if (dbs_enable == 0)
- destroy_workqueue(kondemand_wq);
-
mutex_unlock(&dbs_mutex);
break;
static int __init cpufreq_gov_dbs_init(void)
{
+ kondemand_wq = create_workqueue("kondemand");
+ if (!kondemand_wq) {
+ printk(KERN_ERR "Creation of kondemand failed\n");
+ return -EFAULT;
+ }
return cpufreq_register_governor(&cpufreq_gov_dbs);
}
static void __exit cpufreq_gov_dbs_exit(void)
{
cpufreq_unregister_governor(&cpufreq_gov_dbs);
+ destroy_workqueue(kondemand_wq);
}
module_init(cpufreq_gov_dbs_init);
module_exit(cpufreq_gov_dbs_exit);
+
cpufreq_unregister_notifier(¬ifier_trans_block,
CPUFREQ_TRANSITION_NOTIFIER);
unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
- lock_cpu_hotplug();
for_each_online_cpu(cpu) {
cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier,
CPU_DEAD, (void *)(long)cpu);
}
- unlock_cpu_hotplug();
}
MODULE_AUTHOR ("Zou Nan hai <nanhai.zou@intel.com>");
dprintk("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
- lock_cpu_hotplug();
mutex_lock(&userspace_mutex);
if (!cpu_is_managed[policy->cpu])
goto err;
err:
mutex_unlock(&userspace_mutex);
- unlock_cpu_hotplug();
return ret;
}
unsigned int policy; /* see above */
struct cpufreq_governor *governor; /* see below */
- struct mutex lock; /* CPU ->setpolicy or ->target may
- only be called once a time */
-
struct work_struct update; /* if update_policy() needs to be
* called, but you're in IRQ context */
unsigned int relation);
-extern int cpufreq_driver_getavg(struct cpufreq_policy *policy);
+extern int __cpufreq_driver_getavg(struct cpufreq_policy *policy);
int cpufreq_register_governor(struct cpufreq_governor *governor);
void cpufreq_unregister_governor(struct cpufreq_governor *governor);
+int lock_policy_rwsem_read(int cpu);
+int lock_policy_rwsem_write(int cpu);
+void unlock_policy_rwsem_read(int cpu);
+void unlock_policy_rwsem_write(int cpu);
+
/*********************************************************************
* CPUFREQ DRIVER INTERFACE *
projects / linux-drm-fsl-dcu.git / commitdiff