/* Cypress Gen3 touchpad */
touchpad@67 {
compatible = "cypress,cyapa";
- reg = <0x24>;
+ reg = <0x67>;
interrupt-parent = <&gpio>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
wakeup-source;
ABS_MT_POSITION_X := T_X
ABS_MT_POSITION_Y := T_Y
ABS_MT_TOOL_X := C_X
- ABS_MT_TOOL_X := C_Y
+ ABS_MT_TOOL_Y := C_Y
Unfortunately, there is not enough information to specify both the touching
ellipse and the tool ellipse, so one has to resort to approximations. One
if (w->counter == 24) { /* full frame */
walkera0701_parse_frame(w);
w->counter = NO_SYNC;
- if (abs(pulse_time - SYNC_PULSE) < RESERVE) /* new frame sync */
+ if (abs64(pulse_time - SYNC_PULSE) < RESERVE) /* new frame sync */
w->counter = 0;
} else {
if ((pulse_time > (ANALOG_MIN_PULSE - RESERVE)
} else
w->counter = NO_SYNC;
}
- } else if (abs(pulse_time - SYNC_PULSE - BIN0_PULSE) <
+ } else if (abs64(pulse_time - SYNC_PULSE - BIN0_PULSE) <
RESERVE + BIN1_PULSE - BIN0_PULSE) /* frame sync .. */
w->counter = 0;
error = omap4_keypad_parse_dt(&pdev->dev, keypad_data);
if (error)
- return error;
+ goto err_free_keypad;
res = request_mem_region(res->start, resource_size(res), pdev->name);
if (!res) {
default:
reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
break;
- };
+ }
error = regmap_update_bits(pwrkey->regmap,
pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
dev->id.product = user_dev->id.product;
dev->id.version = user_dev->id.version;
- for_each_set_bit(i, dev->absbit, ABS_CNT) {
+ for (i = 0; i < ABS_CNT; i++) {
input_abs_set_max(dev, i, user_dev->absmax[i]);
input_abs_set_min(dev, i, user_dev->absmin[i]);
input_abs_set_fuzz(dev, i, user_dev->absfuzz[i]);
int (*get_sm_version)(struct i2c_client *client,
u8* ic_type, u8 *version);
int (*get_checksum)(struct i2c_client *client, bool iap, u16 *csum);
- int (*get_product_id)(struct i2c_client *client, u8 *id);
+ int (*get_product_id)(struct i2c_client *client, u16 *id);
int (*get_max)(struct i2c_client *client,
unsigned int *max_x, unsigned int *max_y);
#include "elan_i2c.h"
#define DRIVER_NAME "elan_i2c"
-#define ELAN_DRIVER_VERSION "1.6.0"
+#define ELAN_DRIVER_VERSION "1.6.1"
#define ETP_MAX_PRESSURE 255
#define ETP_FWIDTH_REDUCE 90
#define ETP_FINGER_WIDTH 15
unsigned int x_res;
unsigned int y_res;
- u8 product_id;
+ u16 product_id;
u8 fw_version;
u8 sm_version;
u8 iap_version;
u16 *signature_address)
{
switch (iap_version) {
+ case 0x00:
+ case 0x06:
case 0x08:
*validpage_count = 512;
break;
+ case 0x03:
+ case 0x07:
case 0x09:
+ case 0x0A:
+ case 0x0B:
+ case 0x0C:
*validpage_count = 768;
break;
case 0x0D:
*validpage_count = 896;
break;
+ case 0x0E:
+ *validpage_count = 640;
+ break;
default:
/* unknown ic type clear value */
*validpage_count = 0;
error = elan_get_fwinfo(data->iap_version, &data->fw_validpage_count,
&data->fw_signature_address);
- if (error) {
- dev_err(&data->client->dev,
- "unknown iap version %d\n", data->iap_version);
- return error;
- }
+ if (error)
+ dev_warn(&data->client->dev,
+ "unexpected iap version %#04x (ic type: %#04x), firmware update will not work\n",
+ data->iap_version, data->ic_type);
return 0;
}
const u8 *fw_signature;
static const u8 signature[] = {0xAA, 0x55, 0xCC, 0x33, 0xFF, 0xFF};
+ if (data->fw_validpage_count == 0)
+ return -EINVAL;
+
/* Look for a firmware with the product id appended. */
fw_name = kasprintf(GFP_KERNEL, ETP_FW_NAME, data->product_id);
if (!fw_name) {
return 0;
}
-static int elan_i2c_get_product_id(struct i2c_client *client, u8 *id)
+static int elan_i2c_get_product_id(struct i2c_client *client, u16 *id)
{
int error;
u8 val[3];
return error;
}
- *id = val[0];
+ *id = le16_to_cpup((__le16 *)val);
return 0;
}
return 0;
}
-static int elan_smbus_get_product_id(struct i2c_client *client, u8 *id)
+static int elan_smbus_get_product_id(struct i2c_client *client, u16 *id)
{
int error;
u8 val[3];
return error;
}
- *id = val[1];
+ *id = be16_to_cpup((__be16 *)val);
return 0;
}
struct synaptics_data *priv = psmouse->private;
priv->mode = 0;
-
- if (priv->absolute_mode) {
+ if (priv->absolute_mode)
priv->mode |= SYN_BIT_ABSOLUTE_MODE;
- if (SYN_CAP_EXTENDED(priv->capabilities))
- priv->mode |= SYN_BIT_W_MODE;
- }
-
- if (!SYN_MODE_WMODE(priv->mode) && priv->disable_gesture)
+ if (priv->disable_gesture)
priv->mode |= SYN_BIT_DISABLE_GESTURE;
-
if (psmouse->rate >= 80)
priv->mode |= SYN_BIT_HIGH_RATE;
+ if (SYN_CAP_EXTENDED(priv->capabilities))
+ priv->mode |= SYN_BIT_W_MODE;
if (synaptics_mode_cmd(psmouse, priv->mode))
return -1;
* time before the ACK arrives.
*/
if (ps2_sendbyte(ps2dev, command & 0xff,
- command == PS2_CMD_RESET_BAT ? 1000 : 200))
- goto out;
+ command == PS2_CMD_RESET_BAT ? 1000 : 200)) {
+ serio_pause_rx(ps2dev->serio);
+ goto out_reset_flags;
+ }
- for (i = 0; i < send; i++)
- if (ps2_sendbyte(ps2dev, param[i], 200))
- goto out;
+ for (i = 0; i < send; i++) {
+ if (ps2_sendbyte(ps2dev, param[i], 200)) {
+ serio_pause_rx(ps2dev->serio);
+ goto out_reset_flags;
+ }
+ }
/*
* The reset command takes a long time to execute.
!(ps2dev->flags & PS2_FLAG_CMD), timeout);
}
+ serio_pause_rx(ps2dev->serio);
+
if (param)
for (i = 0; i < receive; i++)
param[i] = ps2dev->cmdbuf[(receive - 1) - i];
if (ps2dev->cmdcnt && (command != PS2_CMD_RESET_BAT || ps2dev->cmdcnt != 1))
- goto out;
+ goto out_reset_flags;
rc = 0;
- out:
- serio_pause_rx(ps2dev->serio);
+ out_reset_flags:
ps2dev->flags = 0;
serio_continue_rx(ps2dev->serio);
parkbd_port = parkbd_allocate_serio();
if (!parkbd_port) {
parport_release(parkbd_dev);
+ parport_unregister_device(parkbd_dev);
return -ENOMEM;
}
* TSC module need ADC to get the measure value. So
* before config TSC, we should initialize ADC module.
*/
-static void imx6ul_adc_init(struct imx6ul_tsc *tsc)
+static int imx6ul_adc_init(struct imx6ul_tsc *tsc)
{
int adc_hc = 0;
int adc_gc;
timeout = wait_for_completion_timeout
(&tsc->completion, ADC_TIMEOUT);
- if (timeout == 0)
+ if (timeout == 0) {
dev_err(tsc->dev, "Timeout for adc calibration\n");
+ return -ETIMEDOUT;
+ }
adc_gs = readl(tsc->adc_regs + REG_ADC_GS);
- if (adc_gs & ADC_CALF)
+ if (adc_gs & ADC_CALF) {
dev_err(tsc->dev, "ADC calibration failed\n");
+ return -EINVAL;
+ }
/* TSC need the ADC work in hardware trigger */
adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG);
adc_cfg |= ADC_HARDWARE_TRIGGER;
writel(adc_cfg, tsc->adc_regs + REG_ADC_CFG);
+
+ return 0;
}
/*
writel(start, tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
}
-static void imx6ul_tsc_init(struct imx6ul_tsc *tsc)
+static int imx6ul_tsc_init(struct imx6ul_tsc *tsc)
{
- imx6ul_adc_init(tsc);
+ int err;
+
+ err = imx6ul_adc_init(tsc);
+ if (err)
+ return err;
imx6ul_tsc_channel_config(tsc);
imx6ul_tsc_set(tsc);
+
+ return 0;
}
static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc)
return err;
}
- imx6ul_tsc_init(tsc);
-
- return 0;
+ return imx6ul_tsc_init(tsc);
}
static void imx6ul_tsc_close(struct input_dev *input_dev)
int tsc_irq;
int adc_irq;
- tsc = devm_kzalloc(&pdev->dev, sizeof(struct imx6ul_tsc), GFP_KERNEL);
+ tsc = devm_kzalloc(&pdev->dev, sizeof(*tsc), GFP_KERNEL);
if (!tsc)
return -ENOMEM;
if (!input_dev)
return -ENOMEM;
- input_dev->name = "iMX6UL TouchScreen Controller";
+ input_dev->name = "iMX6UL Touchscreen Controller";
input_dev->id.bustype = BUS_HOST;
input_dev->open = imx6ul_tsc_open;
}
adc_irq = platform_get_irq(pdev, 1);
- if (adc_irq <= 0) {
+ if (adc_irq < 0) {
dev_err(&pdev->dev, "no adc irq resource?\n");
return adc_irq;
}
goto out;
}
- imx6ul_tsc_init(tsc);
+ retval = imx6ul_tsc_init(tsc);
}
out:
if (of_property_read_u32(np, "x-size", &pdata->x_size)) {
dev_err(dev, "failed to get x-size property\n");
return NULL;
- };
+ }
if (of_property_read_u32(np, "y-size", &pdata->y_size)) {
dev_err(dev, "failed to get y-size property\n");
return NULL;
- };
+ }
of_property_read_u32(np, "contact-threshold",
&pdata->contact_threshold);
projects / linux-drm-fsl-dcu.git / commitdiff