However some customers have peripherals mapped at this addr, so
Linux needs to be scooted a bit.
If you don't know what the above means, leave this setting alone.
+ This needs to match memory start address specified in Device Tree
config HIGHMEM
bool "High Memory Support"
snps,pbl = < 32 >;
clocks = <&apbclk>;
clock-names = "stmmaceth";
+ max-speed = <100>;
};
ehci@0x40000 {
memory {
device_type = "memory";
- reg = <0x0 0x80000000 0x0 0x40000000 /* 1 GB low mem */
+ /* CONFIG_LINUX_LINK_BASE needs to match low mem start */
+ reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */
0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */
};
* @dt_compat: Array of device tree 'compatible' strings
* (XXX: although only 1st entry is looked at)
* @init_early: Very early callback [called from setup_arch()]
- * @init_cpu_smp: for each CPU as it is coming up (SMP as well as UP)
+ * @init_per_cpu: for each CPU as it is coming up (SMP as well as UP)
* [(M):init_IRQ(), (o):start_kernel_secondary()]
* @init_machine: arch initcall level callback (e.g. populate static
* platform devices or parse Devicetree)
const char **dt_compat;
void (*init_early)(void);
#ifdef CONFIG_SMP
- void (*init_cpu_smp)(unsigned int);
+ void (*init_per_cpu)(unsigned int);
#endif
void (*init_machine)(void);
void (*init_late)(void);
* @init_early_smp: A SMP specific h/w block can init itself
* Could be common across platforms so not covered by
* mach_desc->init_early()
- * @init_irq_cpu: Called for each core so SMP h/w block driver can do
+ * @init_per_cpu: Called for each core so SMP h/w block driver can do
* any needed setup per cpu (e.g. IPI request)
* @cpu_kick: For Master to kickstart a cpu (optionally at a PC)
* @ipi_send: To send IPI to a @cpu
struct plat_smp_ops {
const char *info;
void (*init_early_smp)(void);
- void (*init_irq_cpu)(int cpu);
+ void (*init_per_cpu)(int cpu);
void (*cpu_kick)(int cpu, unsigned long pc);
void (*ipi_send)(int cpu);
void (*ipi_clear)(int irq);
extern int arc_unwind(struct unwind_frame_info *frame);
extern void arc_unwind_init(void);
-extern void arc_unwind_setup(void);
extern void *unwind_add_table(struct module *module, const void *table_start,
unsigned long table_size);
extern void unwind_remove_table(void *handle, int init_only);
{
}
-static inline void arc_unwind_setup(void)
-{
-}
#define unwind_add_table(a, b, c)
#define unwind_remove_table(a, b)
static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
- if (irq == TIMER0_IRQ || irq == IPI_IRQ)
+ /*
+ * core intc IRQs [16, 23]:
+ * Statically assigned always private-per-core (Timers, WDT, IPI, PCT)
+ */
+ if (hw < 24) {
+ /*
+ * A subsequent request_percpu_irq() fails if percpu_devid is
+ * not set. That in turns sets NOAUTOEN, meaning each core needs
+ * to call enable_percpu_irq()
+ */
+ irq_set_percpu_devid(irq);
irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq);
- else
+ } else {
irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq);
+ }
return 0;
}
#ifdef CONFIG_SMP
/* a SMP H/w block could do IPI IRQ request here */
- if (plat_smp_ops.init_irq_cpu)
- plat_smp_ops.init_irq_cpu(smp_processor_id());
+ if (plat_smp_ops.init_per_cpu)
+ plat_smp_ops.init_per_cpu(smp_processor_id());
- if (machine_desc->init_cpu_smp)
- machine_desc->init_cpu_smp(smp_processor_id());
+ if (machine_desc->init_per_cpu)
+ machine_desc->init_per_cpu(smp_processor_id());
#endif
}
set_irq_regs(old_regs);
}
+/*
+ * API called for requesting percpu interrupts - called by each CPU
+ * - For boot CPU, actually request the IRQ with genirq core + enables
+ * - For subsequent callers only enable called locally
+ *
+ * Relies on being called by boot cpu first (i.e. request called ahead) of
+ * any enable as expected by genirq. Hence Suitable only for TIMER, IPI
+ * which are guaranteed to be setup on boot core first.
+ * Late probed peripherals such as perf can't use this as there no guarantee
+ * of being called on boot CPU first.
+ */
+
void arc_request_percpu_irq(int irq, int cpu,
irqreturn_t (*isr)(int irq, void *dev),
const char *irq_nm,
if (!cpu) {
int rc;
+#ifdef CONFIG_ISA_ARCOMPACT
/*
- * These 2 calls are essential to making percpu IRQ APIs work
- * Ideally these details could be hidden in irq chip map function
- * but the issue is IPIs IRQs being static (non-DT) and platform
- * specific, so we can't identify them there.
+ * A subsequent request_percpu_irq() fails if percpu_devid is
+ * not set. That in turns sets NOAUTOEN, meaning each core needs
+ * to call enable_percpu_irq()
+ *
+ * For ARCv2, this is done in irq map function since we know
+ * which irqs are strictly per cpu
*/
irq_set_percpu_devid(irq);
- irq_modify_status(irq, IRQ_NOAUTOEN, 0); /* @irq, @clr, @set */
+#endif
rc = request_percpu_irq(irq, isr, irq_nm, percpu_dev);
if (rc)
struct plat_smp_ops plat_smp_ops = {
.info = smp_cpuinfo_buf,
.init_early_smp = mcip_probe_n_setup,
- .init_irq_cpu = mcip_setup_per_cpu,
+ .init_per_cpu = mcip_setup_per_cpu,
.ipi_send = mcip_ipi_send,
.ipi_clear = mcip_ipi_clear,
};
#endif /* CONFIG_ISA_ARCV2 */
-void arc_cpu_pmu_irq_init(void)
+static void arc_cpu_pmu_irq_init(void *data)
{
- struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
+ int irq = *(int *)data;
- arc_request_percpu_irq(arc_pmu->irq, smp_processor_id(), arc_pmu_intr,
- "ARC perf counters", pmu_cpu);
+ enable_percpu_irq(irq, IRQ_TYPE_NONE);
/* Clear all pending interrupt flags */
write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
if (has_interrupts) {
int irq = platform_get_irq(pdev, 0);
- unsigned long flags;
if (irq < 0) {
pr_err("Cannot get IRQ number for the platform\n");
arc_pmu->irq = irq;
- /*
- * arc_cpu_pmu_irq_init() needs to be called on all cores for
- * their respective local PMU.
- * However we use opencoded on_each_cpu() to ensure it is called
- * on core0 first, so that arc_request_percpu_irq() sets up
- * AUTOEN etc. Otherwise enable_percpu_irq() fails to enable
- * perf IRQ on non master cores.
- * see arc_request_percpu_irq()
- */
- preempt_disable();
- local_irq_save(flags);
- arc_cpu_pmu_irq_init();
- local_irq_restore(flags);
- smp_call_function((smp_call_func_t)arc_cpu_pmu_irq_init, 0, 1);
- preempt_enable();
-
- /* Clean all pending interrupt flags */
- write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
+ /* intc map function ensures irq_set_percpu_devid() called */
+ request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
+ this_cpu_ptr(&arc_pmu_cpu));
+
+ on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
+
} else
arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
#endif
arc_unwind_init();
- arc_unwind_setup();
}
static int __init customize_machine(void)
pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
/* Some SMP H/w setup - for each cpu */
- if (plat_smp_ops.init_irq_cpu)
- plat_smp_ops.init_irq_cpu(cpu);
+ if (plat_smp_ops.init_per_cpu)
+ plat_smp_ops.init_per_cpu(cpu);
- if (machine_desc->init_cpu_smp)
- machine_desc->init_cpu_smp(cpu);
+ if (machine_desc->init_per_cpu)
+ machine_desc->init_per_cpu(cpu);
arc_local_timer_setup();
static unsigned long read_pointer(const u8 **pLoc,
const void *end, signed ptrType);
+static void init_unwind_hdr(struct unwind_table *table,
+ void *(*alloc) (unsigned long));
+
+/*
+ * wrappers for header alloc (vs. calling one vs. other at call site)
+ * to elide section mismatches warnings
+ */
+static void *__init unw_hdr_alloc_early(unsigned long sz)
+{
+ return __alloc_bootmem_nopanic(sz, sizeof(unsigned int),
+ MAX_DMA_ADDRESS);
+}
+
+static void *unw_hdr_alloc(unsigned long sz)
+{
+ return kmalloc(sz, GFP_KERNEL);
+}
static void init_unwind_table(struct unwind_table *table, const char *name,
const void *core_start, unsigned long core_size,
__start_unwind, __end_unwind - __start_unwind,
NULL, 0);
/*__start_unwind_hdr, __end_unwind_hdr - __start_unwind_hdr);*/
+
+ init_unwind_hdr(&root_table, unw_hdr_alloc_early);
}
static const u32 bad_cie, not_fde;
e2->fde = v;
}
-static void __init setup_unwind_table(struct unwind_table *table,
- void *(*alloc) (unsigned long))
+static void init_unwind_hdr(struct unwind_table *table,
+ void *(*alloc) (unsigned long))
{
const u8 *ptr;
unsigned long tableSize = table->size, hdrSize;
const u32 *cie = cie_for_fde(fde, table);
signed ptrType;
- if (cie == ¬_fde)
+ if (cie == ¬_fde) /* only process FDE here */
continue;
if (cie == NULL || cie == &bad_cie)
- return;
+ continue; /* say FDE->CIE.version != 1 */
ptrType = fde_pointer_type(cie);
if (ptrType < 0)
- return;
+ continue;
ptr = (const u8 *)(fde + 2);
if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde,
hdrSize = 4 + sizeof(unsigned long) + sizeof(unsigned int)
+ 2 * n * sizeof(unsigned long);
+
header = alloc(hdrSize);
if (!header)
return;
+
header->version = 1;
header->eh_frame_ptr_enc = DW_EH_PE_abs | DW_EH_PE_native;
header->fde_count_enc = DW_EH_PE_abs | DW_EH_PE_data4;
if (fde[1] == 0xffffffff)
continue; /* this is a CIE */
+
+ if (*(u8 *)(cie + 2) != 1)
+ continue; /* FDE->CIE.version not supported */
+
ptr = (const u8 *)(fde + 2);
header->table[n].start = read_pointer(&ptr,
(const u8 *)(fde + 1) +
table->header = (const void *)header;
}
-static void *__init balloc(unsigned long sz)
-{
- return __alloc_bootmem_nopanic(sz,
- sizeof(unsigned int),
- __pa(MAX_DMA_ADDRESS));
-}
-
-void __init arc_unwind_setup(void)
-{
- setup_unwind_table(&root_table, balloc);
-}
-
#ifdef CONFIG_MODULES
static struct unwind_table *last_table;
table_start, table_size,
NULL, 0);
+ init_unwind_hdr(table, unw_hdr_alloc);
+
#ifdef UNWIND_DEBUG
unw_debug("Table added for [%s] %lx %lx\n",
module->name, table->core.pc, table->core.range);
info.init_only = init_only;
unlink_table(&info); /* XXX: SMP */
+ kfree(table->header);
kfree(table);
}
if (*cie <= sizeof(*cie) + 4 || *cie >= fde[1] - sizeof(*fde)
|| (*cie & (sizeof(*cie) - 1))
- || (cie[1] != 0xffffffff))
+ || (cie[1] != 0xffffffff)
+ || ( *(u8 *)(cie + 2) != 1)) /* version 1 supported */
return NULL; /* this is not a (valid) CIE */
return cie;
}
int in_use = 0;
if (!low_mem_sz) {
- BUG_ON(base != low_mem_start);
+ if (base != low_mem_start)
+ panic("CONFIG_LINUX_LINK_BASE != DT memory { }");
+
low_mem_sz = size;
in_use = 1;
} else {
projects / linux-drm-fsl-dcu.git / commitdiff