D: Co-author of German book ``Linux-Kernel-Programmierung''
D: Co-founder of Berlin Linux User Group
+N: Andrew Victor
+E: linux@maxim.org.za
+W: http://maxim.org.za/at91_26.html
+D: First maintainer of Atmel ARM-based SoC, aka AT91
+D: Introduced support for at91rm9200, the first chip of AT91 family
+S: South Africa
+
N: Riku Voipio
E: riku.voipio@iki.fi
D: Author of PCA9532 LED and Fintek f75375s hwmon driver
The addresses are normal I2C addresses. The adapter is the string
name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
-It is *NOT* i2c-<n> itself.
+It is *NOT* i2c-<n> itself. Also, the comparison is done ignoring
+spaces, so if the name is "This is an I2C chip" you can say
+adapter_name=ThisisanI2cchip. This is because it's hard to pass in
+spaces in kernel parameters.
The debug flags are bit flags for each BMC found, they are:
IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8
GPIO support
~~~~~~~~~~~~
ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
-and GpioInt. These resources are used be used to pass GPIO numbers used by
+and GpioInt. These resources can be used to pass GPIO numbers used by
the device to the driver. ACPI 5.1 extended this with _DSD (Device
Specific Data) which made it possible to name the GPIOs among other things.
_DSD Device Properties Related to GPIO
--------------------------------------
-With the release of ACPI 5.1 and the _DSD configuration objecte names
-can finally be given to GPIOs (and other things as well) returned by
-_CRS. Previously, we were only able to use an integer index to find
+With the release of ACPI 5.1, the _DSD configuration object finally
+allows names to be given to GPIOs (and other things as well) returned
+by _CRS. Previously, we were only able to use an integer index to find
the corresponding GPIO, which is pretty error prone (it depends on
the _CRS output ordering, for example).
};
};
+
+ARM Versatile Express Boards
+-----------------------------
+For details on the device tree bindings for ARM Versatile Express boards
+please consult the vexpress.txt file in the same directory as this file.
+
+ARM Juno Boards
+----------------
+The Juno boards are targeting development for AArch64 systems. The first
+iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64,
+with the second iteration, Juno r1, mainly aimed at development of PCIe
+based systems. Juno r1 also has support for AXI masters placed on the TLX
+connectors to join the coherency domain.
+
+Juno boards are described in a similar way to ARM Versatile Express boards,
+with the motherboard part of the hardware being described in a separate file
+to highlight the fact that is part of the support infrastructure for the SoC.
+Juno device tree bindings also share the Versatile Express bindings as
+described under the RS1 memory mapping.
+
+Required properties (in root node):
+ compatible = "arm,juno"; /* For Juno r0 board */
+ compatible = "arm,juno-r1"; /* For Juno r1 board */
+
+Required nodes:
+The description for the board must include:
+ - a "psci" node describing the boot method used for the secondary CPUs.
+ A detailed description of the bindings used for "psci" nodes is present
+ in the psci.txt file.
+ - a "cpus" node describing the available cores and their associated
+ "enable-method"s. For more details see cpus.txt file.
+
+Example:
+
+/dts-v1/;
+/ {
+ model = "ARM Juno development board (r0)";
+ compatible = "arm,juno", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ A57_0: cpu@0 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ .....
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ .....
+ };
+
+};
Broadcom BCM2835 device tree bindings
-------------------------------------------
-Boards with the BCM2835 SoC shall have the following properties:
+Raspberry Pi Model A
+Required root node properties:
+compatible = "raspberrypi,model-a", "brcm,bcm2835";
-Required root node property:
+Raspberry Pi Model A+
+Required root node properties:
+compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+Raspberry Pi Model B
+Required root node properties:
+compatible = "raspberrypi,model-b", "brcm,bcm2835";
+
+Raspberry Pi Model B (no P5)
+early model B with I2C0 rather than I2C1 routed to the expansion header
+Required root node properties:
+compatible = "raspberrypi,model-b-i2c0", "brcm,bcm2835";
+
+Raspberry Pi Model B rev2
+Required root node properties:
+compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+
+Raspberry Pi Model B+
+Required root node properties:
+compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+
+Raspberry Pi Compute Module
+Required root node properties:
+compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+
+Generic BCM2835 board
+Required root node properties:
compatible = "brcm,bcm2835";
Marvell Berlin SoC Family Device Tree Bindings
---------------------------------------------------------------
+Work in progress statement:
+
+Device tree files and bindings applying to Marvell Berlin SoCs and boards are
+considered "unstable". Any Marvell Berlin device tree binding may change at any
+time. Be sure to use a device tree binary and a kernel image generated from the
+same source tree.
+
+Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+stable binding/ABI.
+
+---------------------------------------------------------------
+
Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
shall have the following properties:
different functions which are described below.
Required properties:
-- compatible: shall be one of
- "marvell,berlin2-chip-ctrl" for BG2
- "marvell,berlin2cd-chip-ctrl" for BG2CD
- "marvell,berlin2q-chip-ctrl" for BG2Q
+- compatible:
+ * the first and second values must be:
+ "simple-mfd", "syscon"
- reg: address and length of following register sets for
BG2/BG2CD: chip control register set
BG2Q: chip control register set and cpu pll registers
individual registers dealing with pinmux, padmux, and reset.
Required properties:
-- compatible: should be one of
- "marvell,berlin2-system-ctrl" for BG2
- "marvell,berlin2cd-system-ctrl" for BG2CD
- "marvell,berlin2q-system-ctrl" for BG2Q
+- compatible:
+ * the first and second values must be:
+ "simple-mfd", "syscon"
- reg: address and length of the system control register set
-* Clock provider binding
-
-As clock related registers are spread among the chip control registers, the
-chip control node also provides the clocks. Marvell Berlin2 (BG2, BG2CD, BG2Q)
-SoCs share the same IP for PLLs and clocks, with some minor differences in
-features and register layout.
-
-Required properties:
-- #clock-cells: shall be set to 1
-- clocks: clock specifiers referencing the core clock input clocks
-- clock-names: array of strings describing the input clock specifiers above.
- Allowed clock-names for the reference clocks are
- "refclk" for the SoCs osciallator input on all SoCs,
- and SoC-specific input clocks for
- BG2/BG2CD: "video_ext0" for the external video clock input
-
-Clocks provided by core clocks shall be referenced by a clock specifier
-indexing one of the provided clocks. Refer to dt-bindings/clock/berlin<soc>.h
-for the corresponding index mapping.
-
-* Pin controller binding
-
-Pin control registers are part of both register sets, chip control and system
-control. The pins controlled are organized in groups, so no actual pin
-information is needed.
-
-A pin-controller node should contain subnodes representing the pin group
-configurations, one per function. Each subnode has the group name and the muxing
-function used.
-
-Be aware the Marvell Berlin datasheets use the keyword 'mode' for what is called
-a 'function' in the pin-controller subsystem.
-
-Required subnode-properties:
-- groups: a list of strings describing the group names.
-- function: a string describing the function used to mux the groups.
-
-* Reset controller binding
-
-A reset controller is part of the chip control registers set. The chip control
-node also provides the reset. The register set is not at the same offset between
-Berlin SoCs.
-
-Required property:
-- #reset-cells: must be set to 2
-
Example:
chip: chip-control@ea0000 {
- compatible = "marvell,berlin2-chip-ctrl";
- #clock-cells = <1>;
- #reset-cells = <2>;
+ compatible = "simple-mfd", "syscon";
reg = <0xea0000 0x400>;
- clocks = <&refclk>, <&externaldev 0>;
- clock-names = "refclk", "video_ext0";
- spi1_pmux: spi1-pmux {
- groups = "G0";
- function = "spi1";
- };
+ /* sub-device nodes */
};
sysctrl: system-controller@d000 {
- compatible = "marvell,berlin2-system-ctrl";
+ compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
- uart0_pmux: uart0-pmux {
- groups = "GSM4";
- function = "uart0";
- };
-
- uart1_pmux: uart1-pmux {
- groups = "GSM5";
- function = "uart1";
- };
-
- uart2_pmux: uart2-pmux {
- groups = "GSM3";
- function = "uart2";
- };
+ /* sub-device nodes */
};
Required properties:
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
Should be "ti,omap4-l3-noc" for OMAP4 family
+ Should be "ti,omap5-l3-noc" for OMAP5 family
Should be "ti,dra7-l3-noc" for DRA7 family
Should be "ti,am4372-l3-noc" for AM43 family
- reg: Contains L3 register address range for each noc domain.
--- /dev/null
+Device Tree Clock bindings for Marvell Berlin
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Clock related registers are spread among the chip control registers. Berlin
+clock node should be a sub-node of the chip controller node. Marvell Berlin2
+(BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some
+minor differences in features and register layout.
+
+Required properties:
+- compatible: must be "marvell,berlin2-clk" or "marvell,berlin2q-clk"
+- #clock-cells: must be 1
+- clocks: must be the input parent clock phandle
+- clock-names: name of the input parent clock
+ Allowed clock-names for the reference clocks are
+ "refclk" for the SoCs oscillator input on all SoCs,
+ and SoC-specific input clocks for
+ BG2/BG2CD: "video_ext0" for the external video clock input
+
+
+Example:
+
+chip_clk: clock {
+ compatible = "marvell,berlin2q-clk";
+
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+};
80 81 68 69
70 71 72 73
74 75 76 77>;
- interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+ interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
"saif0", "saif1", "i2c0", "i2c1",
"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
- }
+ };
};
--- /dev/null
+* Pin-controller driver for the Marvell Berlin SoCs
+
+Pin control registers are part of both chip controller and system
+controller register sets. Pin controller nodes should be a sub-node of
+either the chip controller or system controller node. The pins
+controlled are organized in groups, so no actual pin information is
+needed.
+
+A pin-controller node should contain subnodes representing the pin group
+configurations, one per function. Each subnode has the group name and
+the muxing function used.
+
+Be aware the Marvell Berlin datasheets use the keyword 'mode' for what
+is called a 'function' in the pin-controller subsystem.
+
+Required properties:
+- compatible: should be one of:
+ "marvell,berlin2-soc-pinctrl",
+ "marvell,berlin2-system-pinctrl",
+ "marvell,berlin2cd-soc-pinctrl",
+ "marvell,berlin2cd-system-pinctrl",
+ "marvell,berlin2q-soc-pinctrl",
+ "marvell,berlin2q-system-pinctrl"
+
+Required subnode-properties:
+- groups: a list of strings describing the group names.
+- function: a string describing the function used to mux the groups.
+
+Example:
+
+sys_pinctrl: pin-controller {
+ compatible = "marvell,berlin2q-system-pinctrl";
+
+ uart0_pmux: uart0-pmux {
+ groups = "GSM12";
+ function = "uart0";
+ };
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pmux>;
+ pinctrl-names = "default";
+};
--- /dev/null
+Marvell Berlin reset controller
+===============================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+The reset controller node must be a sub-node of the chip controller
+node on Berlin SoCs.
+
+Required properties:
+- compatible: should be "marvell,berlin2-reset"
+- #reset-cells: must be set to 2
+
+Example:
+
+chip_rst: reset {
+ compatible = "marvell,berlin2-reset";
+ #reset-cells = <2>;
+};
+
+&usb_phy0 {
+ resets = <&chip_rst 0x104 12>;
+};
--- /dev/null
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+ "abracon,abx80x"
+ "abracon,ab0801"
+ "abracon,ab0803"
+ "abracon,ab0804"
+ "abracon,ab0805"
+ "abracon,ab1801"
+ "abracon,ab1803"
+ "abracon,ab1804"
+ "abracon,ab1805"
+ Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+ resistor, the other values are in ohm.
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
- interrupts : A list of 3 interrupts; one per timer channel.
- clocks: phandle to the source clock
+Optional properties:
+- timer-width: Bit width of the timer, necessary if not 16.
+
Example:
ttc0: ttc0@f8001000 {
compatible = "cdns,ttc";
reg = <0xF8001000 0x1000>;
clocks = <&cpu_clk 3>;
+ timer-width = <32>;
};
Required properties:
- compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
used in host mode.
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain ehci interrupt
+ - clocks: Should reference the peripheral, host and system clocks
+ - clock-names: Should contains two strings
+ "ohci_clk" for the peripheral clock
+ "hclk" for the host clock
+ "uhpck" for the system clock
- num-ports: Number of ports.
- atmel,vbus-gpio: If present, specifies a gpio that needs to be
activated for the bus to be powered.
usb0: ohci@00500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
interrupts = <20 4>;
num-ports = <2>;
};
Required properties:
- compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
used in host mode.
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain ehci interrupt
+ - clocks: Should reference the peripheral and the UTMI clocks
+ - clock-names: Should contains two strings
+ "ehci_clk" for the peripheral clock
+ "usb_clk" for the UTMI clock
usb1: ehci@00800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 4>;
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
};
AT91 USB device controller
compatible = "atmel,at91rm9200-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 4>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
atmel,vbus-gpio = <&pioC 5 0>;
};
"sama5d3-udc"
- reg: Address and length of the register set for the device
- interrupts: Should contain usba interrupt
+ - clocks: Should reference the peripheral and host clocks
+ - clock-names: Should contains two strings
+ "pclk" for the peripheral clock
+ "hclk" for the host clock
- ep childnode: To specify the number of endpoints and their properties.
Optional properties:
reg = <0x00600000 0x80000
0xfff78000 0x400>;
interrupts = <27 4 0>;
+ clocks = <&utmi>, <&udphs_clk>;
+ clock-names = "hclk", "pclk";
atmel,vbus-gpio = <&pioB 19 0>;
ep0 {
capella Capella Microsystems, Inc
cavium Cavium, Inc.
cdns Cadence Design Systems Inc.
+ceva Ceva, Inc.
chipidea Chipidea, Inc
chipone ChipOne
chipspark ChipSPARK
cortina Cortina Systems, Inc.
cosmic Cosmic Circuits
crystalfontz Crystalfontz America, Inc.
+cubietech Cubietech, Ltd.
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
denx Denx Software Engineering
dlg Dialog Semiconductor
dlink D-Link Corporation
dmo Data Modul AG
+ea Embedded Artists AB
ebv EBV Elektronik
edt Emerging Display Technologies
elan Elan Microelectronic Corp.
himax Himax Technologies, Inc.
hisilicon Hisilicon Limited.
hit Hitachi Ltd.
+hitex Hitex Development Tools
honeywell Honeywell
hp Hewlett Packard
i2se I2SE GmbH
raidsonic RaidSonic Technology GmbH
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
+raspberrypi Raspberry Pi Foundation
realtek Realtek Semiconductor Corp.
renesas Renesas Electronics Corporation
ricoh Ricoh Co. Ltd.
via VIA Technologies, Inc.
virtio Virtual I/O Device Specification, developed by the OASIS consortium
voipac Voipac Technologies s.r.o.
+wexler Wexler
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
bugs.
KASan uses compile-time instrumentation for checking every memory access,
-therefore you will need a certain version of GCC > 4.9.2
+therefore you will need a gcc version of 4.9.2 or later. KASan could detect out
+of bounds accesses to stack or global variables, but only if gcc 5.0 or later was
+used to built the kernel.
Currently KASan is supported only for x86_64 architecture and requires that the
kernel be built with the SLUB allocator.
and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline
is compiler instrumentation types. The former produces smaller binary the
-latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or
-latter.
+latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version
+of 5.0 or later.
Currently KASAN works only with the SLUB memory allocator.
For better bug detection and nicer report, enable CONFIG_STACKTRACE and put
READ_CAPACITY_16 command);
f = NO_REPORT_OPCODES (don't use report opcodes
command, uas only);
+ g = MAX_SECTORS_240 (don't transfer more than
+ 240 sectors at a time, uas only);
h = CAPACITY_HEURISTICS (decrease the
reported device capacity by one
sector if the number is odd);
should be altered from the default:
[ req_distinguished_name ]
- O = Magrathea
- CN = Glacier signing key
- emailAddress = slartibartfast@magrathea.h2g2
+ #O = Unspecified company
+ CN = Build time autogenerated kernel key
+ #emailAddress = unspecified.user@unspecified.company
The generated RSA key size can also be set with:
Possible values: 0 - 1048575
Default: 0
+
+conf/<interface>/input - BOOL
+ Control whether packets can be input on this interface.
+
+ If disabled, packets will be discarded without further
+ processing.
+
+ 0 - disabled (default)
+ not 0 - enabled
- The current CPU's queue head counter >= the recorded tail counter
value in rps_dev_flow[i]
-- The current CPU is unset (equal to RPS_NO_CPU)
+- The current CPU is unset (>= nr_cpu_ids)
- The current CPU is offline
After this check, the packet is sent to the (possibly updated) current
Syscalls
========
-Syscalls made from within an active transaction will not be performed and the
-transaction will be doomed by the kernel with the failure code TM_CAUSE_SYSCALL
-| TM_CAUSE_PERSISTENT.
+Performing syscalls from within transaction is not recommended, and can lead
+to unpredictable results.
-Syscalls made from within a suspended transaction are performed as normal and
-the transaction is not explicitly doomed by the kernel. However, what the
-kernel does to perform the syscall may result in the transaction being doomed
-by the hardware. The syscall is performed in suspended mode so any side
-effects will be persistent, independent of transaction success or failure. No
-guarantees are provided by the kernel about which syscalls will affect
-transaction success.
+Syscalls do not by design abort transactions, but beware: The kernel code will
+not be running in transactional state. The effect of syscalls will always
+remain visible, but depending on the call they may abort your transaction as a
+side-effect, read soon-to-be-aborted transactional data that should not remain
+invisible, etc. If you constantly retry a transaction that constantly aborts
+itself by calling a syscall, you'll have a livelock & make no progress.
-Care must be taken when relying on syscalls to abort during active transactions
-if the calls are made via a library. Libraries may cache values (which may
-give the appearance of success) or perform operations that cause transaction
-failure before entering the kernel (which may produce different failure codes).
-Examples are glibc's getpid() and lazy symbol resolution.
+Simple syscalls (e.g. sigprocmask()) "could" be OK. Even things like write()
+from, say, printf() should be OK as long as the kernel does not access any
+memory that was accessed transactionally.
+
+Consider any syscalls that happen to work as debug-only -- not recommended for
+production use. Best to queue them up till after the transaction is over.
Signals
TM_CAUSE_RESCHED Thread was rescheduled.
TM_CAUSE_TLBI Software TLB invalid.
TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap.
- TM_CAUSE_SYSCALL Syscall from active transaction.
+ TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort
+ transactions for consistency will use this.
TM_CAUSE_SIGNAL Signal delivered.
TM_CAUSE_MISC Currently unused.
TM_CAUSE_ALIGNMENT Alignment fault.
F: arch/arm/mach-alpine/
ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
-M: Andrew Victor <linux@maxim.org.za>
M: Nicolas Ferre <nicolas.ferre@atmel.com>
+M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://maxim.org.za/at91_26.html
W: http://www.linux4sam.org
S: Supported
F: arch/arm/mach-at91/
F: drivers/clocksource/timer-atlas7.c
N: [^a-z]sirf
+ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
+M: Baruch Siach <baruch@tkos.co.il>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+N: digicolor
+
ARM/EBSA110 MACHINE SUPPORT
M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
M: Dinh Nguyen <dinguyen@opensource.altera.com>
S: Maintained
F: arch/arm/mach-socfpga/
+F: arch/arm/boot/dts/socfpga*
+F: arch/arm/configs/socfpga_defconfig
W: http://www.rocketboards.org
-T: git://git.rocketboards.org/linux-socfpga.git
-T: git://git.rocketboards.org/linux-socfpga-next.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
M: Dinh Nguyen <dinguyen@opensource.altera.com>
F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
-M: Christian Daudt <bcm@fixthebug.org>
M: Florian Fainelli <f.fainelli@gmail.com>
+M: Ray Jui <rjui@broadcom.com>
+M: Scott Branden <sbranden@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/mach-bcm
S: Maintained
F: drivers/usb/gadget/udc/bcm63xx_udc.*
BROADCOM BCM7XXX ARM ARCHITECTURE
-M: Marc Carino <marc.ceeeee@gmail.com>
M: Brian Norris <computersforpeace@gmail.com>
M: Gregory Fong <gregory.0xf0@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
F: drivers/gpu/drm/shmobile/
F: include/linux/platform_data/shmob_drm.h
+DRM DRIVERS FOR ROCKCHIP
+M: Mark Yao <mark.yao@rock-chips.com>
+L: dri-devel@lists.freedesktop.org
+S: Maintained
+F: drivers/gpu/drm/rockchip/
+F: Documentation/devicetree/bindings/video/rockchip*
+
DSBR100 USB FM RADIO DRIVER
M: Alexey Klimov <klimov.linux@gmail.com>
L: linux-media@vger.kernel.org
F: drivers/video/fbdev/imsttfb.c
INFINIBAND SUBSYSTEM
-M: Roland Dreier <roland@kernel.org>
+M: Doug Ledford <dledford@redhat.com>
M: Sean Hefty <sean.hefty@intel.com>
M: Hal Rosenstock <hal.rosenstock@gmail.com>
L: linux-rdma@vger.kernel.org
W: http://www.openfabrics.org/
Q: http://patchwork.kernel.org/project/linux-rdma/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
+T: git git://github.com/dledford/linux.git
S: Supported
F: Documentation/infiniband/
F: drivers/infiniband/
F: include/uapi/linux/if_infiniband.h
+F: include/uapi/rdma/
+F: include/rdma/
INOTIFY
M: John McCutchan <john@johnmccutchan.com>
LED SUBSYSTEM
M: Bryan Wu <cooloney@gmail.com>
M: Richard Purdie <rpurdie@rpsys.net>
+M: Jacek Anaszewski <j.anaszewski@samsung.com>
L: linux-leds@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
S: Maintained
F: include/uapi/linux/virtio_console.h
VIRTIO CORE, NET AND BLOCK DRIVERS
-M: Rusty Russell <rusty@rustcorp.com.au>
M: "Michael S. Tsirkin" <mst@redhat.com>
L: virtualization@lists.linux-foundation.org
S: Maintained
ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER
M: Minchan Kim <minchan@kernel.org>
M: Nitin Gupta <ngupta@vflare.org>
+R: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/block/zram/
VERSION = 4
PATCHLEVEL = 1
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
tny_a9263.dtb \
usb_a9263.dtb \
at91-foxg20.dtb \
+ at91-kizbox.dtb \
at91sam9g20ek.dtb \
at91sam9g20ek_2mmc.dtb \
- kizbox.dtb \
tny_a9g20.dtb \
usb_a9g20.dtb \
usb_a9g20_lpw.dtb \
at91sam9rlek.dtb \
at91-ariag25.dtb \
at91-cosino_mega2560.dtb \
+ at91-kizboxmini.dtb \
at91sam9g15ek.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
+ at91-kizbox2.dtb \
at91-sama5d3_xplained.dtb \
sama5d31ek.dtb \
sama5d33ek.dtb \
kirkwood-ts219-6282.dtb \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
+dtb-$(CONFIG_ARCH_LPC18XX) += \
+ lpc4350-hitex-eval.dtb \
+ lpc4357-ea4357-devkit.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += \
ea3250.dtb phy3250.dtb
dtb-$(CONFIG_MACH_MESON6) += \
dtb-$(CONFIG_SOC_VF610) += \
vf500-colibri-eval-v3.dtb \
vf610-colibri-eval-v3.dtb \
+ vf610m4-colibri.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += \
am3517-craneboard.dtb \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
+ logicpd-torpedo-37xx-devkit.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
omap3-beagle-xm.dtb \
dtb-$(CONFIG_SOC_TI81XX) += \
dm8168-evm.dtb
dtb-$(CONFIG_SOC_AM33XX) += \
+ am335x-baltos-ir5221.dtb \
am335x-base0033.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
- socfpga_arria10_socdk.dtb \
+ socfpga_arria10_socdk_sdmmc.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
sun4i-a10-ba10-tvbox.dtb \
sun4i-a10-chuwi-v7-cw0825.dtb \
sun4i-a10-cubieboard.dtb \
+ sun4i-a10-gemei-g9.dtb \
+ sun4i-a10-hackberry.dtb \
+ sun4i-a10-hyundai-a7hd.dtb \
+ sun4i-a10-inet97fv2.dtb \
+ sun4i-a10-jesurun-q5.dtb \
sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-mk802.dtb \
sun4i-a10-mk802ii.dtb \
- sun4i-a10-hackberry.dtb \
- sun4i-a10-hyundai-a7hd.dtb \
- sun4i-a10-inet97fv2.dtb \
sun4i-a10-olinuxino-lime.dtb \
sun4i-a10-pcduino.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
+ sun5i-a10s-auxtek-t004.dtb \
sun5i-a10s-mk802.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a13-hsg-h702.dtb \
sun5i-a13-olinuxino.dtb \
- sun5i-a13-olinuxino-micro.dtb
+ sun5i-a13-olinuxino-micro.dtb \
+ sun5i-a13-utoo-p66.dtb
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
sun6i-a31-hummingbird.dtb \
+ sun6i-a31-i7.dtb \
sun6i-a31-m9.dtb \
sun6i-a31s-cs908.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
sun7i-a20-m3.dtb \
+ sun7i-a20-mk808c.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-micro.dtb \
- sun7i-a20-pcduino3.dtb
+ sun7i-a20-orangepi.dtb \
+ sun7i-a20-orangepi-mini.dtb \
+ sun7i-a20-pcduino3.dtb \
+ sun7i-a20-pcduino3-nano.dtb \
+ sun7i-a20-wexler-tab7200.dtb
dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a23-ippo-q8h-v5.dtb \
sun8i-a23-ippo-q8h-v1.2.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
- sun9i-a80-optimus.dtb
+ sun9i-a80-optimus.dtb \
+ sun9i-a80-cubieboard4.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-harmony.dtb \
tegra20-iris-512.dtb \
ste-hrefv60plus-tvk.dtb \
ste-ccu8540.dtb \
ste-ccu9540.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+ uniphier-ph1-sld3-ref.dtb \
+ uniphier-ph1-ld4-ref.dtb \
+ uniphier-ph1-pro4-ref.dtb \
+ uniphier-ph1-sld8-ref.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += \
versatile-ab.dtb \
versatile-pb.dtb
zynq-zybo.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-db.dtb \
+ armada-370-dlink-dns327l.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
armada-370-netgear-rn104.dtb \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
armada-385-db-ap.dtb \
+ armada-385-linksys-caiman.dtb \
+ armada-385-linksys-cobra.dtb \
armada-388-db.dtb \
armada-388-gp.dtb \
armada-388-rd.dtb
armada-xp-openblocks-ax3-4.dtb \
armada-xp-synology-ds414.dtb
dtb-$(CONFIG_MACH_DOVE) += \
- dove-cm-a510.dtb \
dove-cubox.dtb \
dove-cubox-es.dtb \
dove-d2plug.dtb \
dove-d3plug.dtb \
- dove-dove-db.dtb
+ dove-dove-db.dtb \
+ dove-sbc-a510.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "OnRISC Baltos iR 5221";
+ compatible = "vscom,onrisc", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ wl12xx_vmmc: fixedregulator@2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 8 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&am33xx_pinmux {
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x020 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
+ 0x024 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
+ 0x028 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
+ 0x02c (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
+ 0x080 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
+ 0x084 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
+ 0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
+ >;
+ };
+
+ wl12xx_gpio: pinmux_wl12xx_gpio {
+ pinctrl-single,pins = <
+ 0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
+ >;
+ };
+
+ tps65910_pins: pinmux_tps65910_pins {
+ pinctrl-single,pins = <
+ 0x078 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
+ >;
+ };
+
+ tca6416_pins: pinmux_tca6416_pins {
+ pinctrl-single,pins = <
+ 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0x158 0x2a /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */
+ 0x15c 0x2a /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */
+ >;
+ };
+
+ dcan1_pins: pinmux_dcan1_pins {
+ pinctrl-single,pins = <
+ 0x168 0x0a /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */
+ 0x16c 0x2a /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ 0x180 0x28 /* uart1_rxd, INPUT | MODE0 */
+ 0x184 0x28 /* uart1_txd, INPUT | MODE0 */
+ /*0x178 0x28*/ /* uart1_ctsn, INPUT | MODE0 */
+ /*0x17c 0x08*/ /* uart1_rtsn, OUTPUT | MODE0 */
+ 0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */
+ 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */
+ 0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ 0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ 0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ 0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0x150 0x29 /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */
+ 0x154 0x09 /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */
+ /*0x188 0x2a*/ /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */
+ /*0x18c 0x2a*/ /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */
+ 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */
+ 0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */
+ 0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
+ 0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
+ 0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
+ 0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
+
+ 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
+
+
+ /* Slave 2 */
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+ /* Slave 2 reset value*/
+ 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ nandflash_pins_s0: nandflash_pins_s0 {
+ pinctrl-single,pins = <
+ 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ >;
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins_s0>;
+ ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ status = "okay";
+
+ nand@0,0 {
+ reg = <0 0 0>; /* CS0, offset 0 */
+ nand-bus-width = <8>;
+ ti,nand-ecc-opt = "bch8";
+ ti,nand-xfer-type = "polled";
+
+ gpmc,device-nand = "true";
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ elm_id = <&elm>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65910_pins>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c02";
+ pagesize = <8>;
+ reg = <0x50>;
+ };
+
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <20 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tca6416_pins>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ ti,en-ck32k-xtal = <1>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1312500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ dual_emac = <1>;
+
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <7>;
+ phy-mode = "rgmii-txid";
+ dual_emac_res_vlan = <2>;
+};
+
+&phy_sel {
+ rmii-clock-ext = <1>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc_reg>;
+ status = "okay";
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&wl12xx_vmmc>;
+ ti,non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&gpio0 {
+ ti,no-reset-on-init;
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+
+ status = "okay";
+};
>;
};
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ >;
+ };
+
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
reg = <0x24>;
};
+ baseboard_eeprom: baseboard_eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ baseboard_data: baseboard_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ cape_eeprom0: cape_eeprom0@54 {
+ compatible = "at,24c256";
+ reg = <0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape0_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom1: cape_eeprom1@55 {
+ compatible = "at,24c256";
+ reg = <0x55>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape1_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom2: cape_eeprom2@56 {
+ compatible = "at,24c256";
+ reg = <0x56>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape2_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom3: cape_eeprom3@57 {
+ compatible = "at,24c256";
+ reg = <0x57>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape3_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
};
+
/include/ "tps65217.dtsi"
&tps {
/dts-v1/;
#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "TI AM335x EVM";
regulator-boot-on;
};
+ wlan_en_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* WLAN_EN GPIO for this board - Bank1, pin16 */
+ gpio = <&gpio1 16 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
matrix_keypad: matrix_keypad@0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
>;
};
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ >;
+ };
+
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+ 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+ 0x4C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+ 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+ 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+ 0x8C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+ >;
+ };
+
+ wlan_pins: pinmux_wlan_pins {
+ pinctrl-single,pins = <
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ 0x19C (PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */
+ 0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */
+ >;
+ };
+
lcd_pins_s0: lcd_pins_s0 {
pinctrl-single,pins = <
0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
status = "okay";
};
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
+&mmc3 {
+ /* these are on the crossbar and are outlined in the
+ xbar-event-map element */
+ dmas = <&edma 12
+ &edma 13>;
+ dma-names = "tx", "rx";
+ status = "okay";
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins &wlan_pins>;
+ ti,non-removable;
+ ti,needs-special-hs-handling;
+ cap-power-off-card;
+ keep-power-in-suspend;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@0 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&edma {
+ ti,edma-xbar-event-map = /bits/ 16 <1 12
+ 2 13>;
+};
+
&sham {
status = "okay";
};
dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
+
+ omap3_pmx_core2: pinmux@480025d8 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x480025d8 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
};
};
aliases {
display0 = &lcd0;
+ serial3 = &uart3;
};
vmmcsd_fixed: fixedregulator-sd {
gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
};
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
backlight {
compatible = "pwm-backlight";
pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
};
};
};
+
+ /* fixed 12MHz oscillator */
+ refclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+
};
&am43xx_pinmux {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wlan_pins_default>;
+ pinctrl-1 = <&wlan_pins_sleep>;
+
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
>;
};
+
+ mmc3_pins_default: pinmux_mmc3_pins_default {
+ pinctrl-single,pins = <
+ 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
+ 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
+ 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
+ 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */
+ >;
+ };
+
+ mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
+ pinctrl-single,pins = <
+ 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */
+ 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */
+ 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */
+ 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */
+ 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */
+ >;
+ };
+
+ wlan_pins_default: pinmux_wlan_pins_default {
+ pinctrl-single,pins = <
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
+ 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
+ >;
+ };
+
+ wlan_pins_sleep: pinmux_wlan_pins_sleep {
+ pinctrl-single,pins = <
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
+ 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
+ 0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
+ >;
+ };
+
+ uart3_pins: uart3_pins {
+ pinctrl-single,pins = <
+ 0x228 (PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */
+ 0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+ 0x230 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */
+ 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+ >;
+ };
};
&i2c0 {
regulator-always-on;
};
};
+
+ ov2659@30 {
+ compatible = "ovti,ov2659";
+ reg = <0x30>;
+
+ clocks = <&refclk 0>;
+ clock-names = "xvclk";
+
+ port {
+ ov2659_0: endpoint {
+ remote-endpoint = <&vpfe1_ep>;
+ link-frequencies = /bits/ 64 <70000000>;
+ };
+ };
+ };
};
&i2c1 {
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
};
+
+ ov2659@30 {
+ compatible = "ovti,ov2659";
+ reg = <0x30>;
+
+ clocks = <&refclk 0>;
+ clock-names = "xvclk";
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe0_ep>;
+ link-frequencies = /bits/ 64 <70000000>;
+ };
+ };
+ };
};
&epwmss0 {
status = "okay";
};
+&gpio1 {
+ status = "okay";
+};
+
&gpio3 {
status = "okay";
};
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
+&mmc3 {
+ status = "okay";
+ /* these are on the crossbar and are outlined in the
+ xbar-event-map element */
+ dmas = <&edma 30
+ &edma 31>;
+ dma-names = "tx", "rx";
+ vmmc-supply = <&vmmcwl_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mmc3_pins_default>;
+ pinctrl-1 = <&mmc3_pins_sleep>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ ti,non-removable;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@0 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&edma {
+ ti,edma-xbar-event-map = /bits/ 16 <1 30
+ 2 31>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
&usb2_phy1 {
status = "okay";
};
port {
vpfe0_ep: endpoint {
- /* remote-endpoint = <&sensor>; add once we have it */
+ remote-endpoint = <&ov2659_1>;
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
port {
vpfe1_ep: endpoint {
- /* remote-endpoint = <&sensor>; add once we have it */
+ remote-endpoint = <&ov2659_0>;
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
pinctrl-0 = <&matrix_keypad_pins>;
debounce-delay-ms = <5>;
- col-scan-delay-us = <1500>;
+ col-scan-delay-us = <5>;
row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
&gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
interrupt-parent = <&gpio0>;
interrupts = <31 0>;
- wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <480>;
touchscreen-size-y = <272>;
aliases {
rtc0 = &mcp_rtc;
rtc1 = &tps659038_rtc;
+ rtc2 = &rtc;
};
memory {
gpio_fan: gpio_fan {
/* Based on 5v 500mA AFB02505HHB */
compatible = "gpio-fan";
- gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
#cooling-cells = <2>;
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
- 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
- 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+ 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+ 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
>;
};
mcp_rtc: rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
+ interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */
pinctrl-names = "default";
pinctrl-0 = <&mcp79410_pins_default>;
&uart3 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
- <&dra7_pmx_core 0x248>;
+ <&dra7_pmx_core 0x3f8>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_default>;
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mx25l25635e";
+ compatible = "mx25l25635e", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
};
--- /dev/null
+/*
+ * Device Tree file for D-Link DNS-327L
+ *
+ * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Remaining unsolved:
+ * There's still some unknown device on i2c address 0x13
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+ model = "D-Link DNS-327L";
+ compatible = "dlink,dns327l",
+ "marvell,armada370",
+ "marvell,armada-370-xp";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MiB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ sata@a0000 {
+ nr-ports = <2>;
+ status = "okay";
+ };
+
+ usb@50000 {
+ status = "okay";
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partition@0 {
+ label = "u-boot";
+ /* 1.0 MiB */
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ /* 128 KiB */
+ reg = <0x100000 0x20000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "uImage";
+ /* 7 MiB */
+ reg = <0x120000 0x700000>;
+ };
+
+ partition@820000 {
+ label = "ubifs";
+ /* ~ 84 MiB */
+ reg = <0x820000 0x54e0000>;
+ };
+
+ /* Hardcoded into stock bootloader */
+ partition@5d00000 {
+ label = "failsafe-uImage";
+ /* 5 MiB */
+ reg = <0x5d00000 0x500000>;
+ };
+
+ partition@6200000 {
+ label = "failsafe-fs";
+ /* 29 MiB */
+ reg = <0x6200000 0x1d00000>;
+ };
+
+ partition@7f00000 {
+ label = "bbt";
+ /* 1 MiB for BBT */
+ reg = <0x7f00000 0x100000>;
+ };
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <
+ &backup_button_pin
+ &power_button_pin
+ &reset_button_pin>;
+ pinctrl-names = "default";
+
+ power-button {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ backup-button {
+ label = "Backup Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+ };
+
+ reset-button {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <
+ &sata_l_amber_pin
+ &sata_r_amber_pin
+ &backup_led_pin
+ /* Ensure these are managed by hardware */
+ &sata_l_white_pin
+ &sata_r_white_pin>;
+
+ pinctrl-names = "default";
+
+ sata-r-amber-pin {
+ label = "dns327l:amber:sata-r";
+ gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ sata-l-amber-pin {
+ label = "dns327l:amber:sata-l";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ backup-led-pin {
+ label = "dns327l:white:usb";
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ pinctrl-0 = <&xhci_pwr_pin>;
+ pinctrl-names = "default";
+ regulator-name = "USB3.0 Port Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata_r_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ pinctrl-0 = <&sata_r_pwr_pin>;
+ pinctrl-names = "default";
+ regulator-name = "SATA-R Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <2000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata_l_power: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ pinctrl-0 = <&sata_l_pwr_pin>;
+ pinctrl-names = "default";
+ regulator-name = "SATA-L Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <4000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ sata_l_white_pin: sata-l-white-pin {
+ marvell,pins = "mpp57";
+ marvell,function = "sata0";
+ };
+
+ sata_r_white_pin: sata-r-white-pin {
+ marvell,pins = "mpp55";
+ marvell,function = "sata1";
+ };
+
+ sata_r_amber_pin: sata-r-amber-pin {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
+
+ sata_l_amber_pin: sata-l-amber-pin {
+ marvell,pins = "mpp53";
+ marvell,function = "gpio";
+ };
+
+ backup_led_pin: backup-led-pin {
+ marvell,pins = "mpp61";
+ marvell,function = "gpo";
+ };
+
+ xhci_pwr_pin: xhci-pwr-pin {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ sata_r_pwr_pin: sata-r-pwr-pin {
+ marvell,pins = "mpp54";
+ marvell,function = "gpio";
+ };
+
+ sata_l_pwr_pin: sata-l-pwr-pin {
+ marvell,pins = "mpp56";
+ marvell,function = "gpio";
+ };
+
+ uart1_pins: uart1-pins {
+ marvell,pins = "mpp60", "mpp61";
+ marvell,function = "uart1";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp65";
+ marvell,function = "gpio";
+ };
+
+ backup_button_pin: backup-button-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp64";
+ marvell,function = "gpio";
+ };
+};
+
+/* Serial console */
+&uart0 {
+ status = "okay";
+};
+
+/* Connected to Weltrend MCU */
+&uart1 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mdio {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ reg = <0>;
+ marvell,reg-init = <0x0 0x16 0x0 0x0002>,
+ <0x0 0x19 0x0 0x0077>,
+ <0x0 0x18 0x0 0x5747>;
+ };
+};
+
+ð1 {
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&i2c0 {
+ compatible = "marvell,mv64xxx-i2c";
+ clock-frequency = <100000>;
+ status = "okay";
+};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q064";
+ compatible = "micron,n25q064", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
};
spi0: spi@10600 {
- compatible = "marvell,armada-370-spi", "marvell,orion-spi";
reg = <0x10600 0x28>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@10680 {
- compatible = "marvell,armada-370-spi", "marvell,orion-spi";
reg = <0x10680 0x28>;
#address-cells = <1>;
#size-cells = <0>;
* board level if a different configuration is used.
*/
spi0: spi@10600 {
+ compatible = "marvell,armada-370-spi",
+ "marvell,orion-spi";
pinctrl-0 = <&spi0_pins1>;
pinctrl-names = "default";
};
spi1: spi@10680 {
+ compatible = "marvell,armada-370-spi",
+ "marvell,orion-spi";
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q128a13";
+ compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
spi0: spi@10600 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-375-spi",
+ "marvell,orion-spi";
reg = <0x10600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@10680 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-375-spi",
+ "marvell,orion-spi";
reg = <0x10680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p128";
+ compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <54000000>;
};
--- /dev/null
+/*
+ * Device Tree include for the Linksys WRT1200AC (Caiman)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+ model = "Linksys WRT1200AC";
+ compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+
+ soc {
+ internal-regs{
+ i2c@11000 {
+
+ pca9635@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wan_amber@0 {
+ label = "caiman:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_white@1 {
+ label = "caiman:white:wan";
+ reg = <0x1>;
+ };
+
+ wlan_2g@2 {
+ label = "caiman:white:wlan_2g";
+ reg = <0x2>;
+ };
+
+ wlan_5g@3 {
+ label = "caiman:white:wlan_5g";
+ reg = <0x3>;
+ };
+
+ usb2@5 {
+ label = "caiman:white:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1@6 {
+ label = "caiman:white:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2@7 {
+ label = "caiman:white:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_white@8 {
+ label = "caiman:white:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber@9 {
+ label = "caiman:amber:wps";
+ reg = <0x9>;
+ };
+ };
+ };
+ };
+ };
+
+ gpio-leds {
+ power {
+ label = "caiman:white:power";
+ };
+
+ sata {
+ label = "caiman:white:sata";
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for the Linksys WRT1900ACv2 (Cobra)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+ model = "Linksys WRT1900ACv2";
+ compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+
+ soc {
+ internal-regs{
+ i2c@11000 {
+
+ pca9635@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wan_amber@0 {
+ label = "cobra:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_white@1 {
+ label = "cobra:white:wan";
+ reg = <0x1>;
+ };
+
+ wlan_2g@2 {
+ label = "cobra:white:wlan_2g";
+ reg = <0x2>;
+ };
+
+ wlan_5g@3 {
+ label = "cobra:white:wlan_5g";
+ reg = <0x3>;
+ };
+
+ usb2@5 {
+ label = "cobra:white:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1@6 {
+ label = "cobra:white:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2@7 {
+ label = "cobra:white:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_white@8 {
+ label = "cobra:white:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber@9 {
+ label = "cobra:amber:wps";
+ reg = <0x9>;
+ };
+ };
+ };
+ };
+ };
+
+ gpio-leds {
+ power {
+ label = "cobra:white:power";
+ };
+
+ sata {
+ label = "cobra:white:sata";
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree include file for Armada 385 based Linksys boards
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+ model = "Linksys boards based on Armada 385";
+ compatible = "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+
+ spi@10600 {
+ status = "disabled";
+ };
+
+ i2c@11000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ tmp421@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+
+ pca9635@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,pca9635";
+ reg = <0x68>;
+ };
+ };
+
+ /* J10: VCC, NC, RX, NC, TX, GND */
+ serial@12000 {
+ status = "okay";
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ ethernet@34000 {
+ status = "okay";
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ mdio {
+ status = "okay";
+ };
+
+ sata@a8000 {
+ status = "okay";
+ };
+
+ /* USB part of the eSATA/USB 2.0 port */
+ usb@50000 {
+ status = "okay";
+ };
+
+ usb3@f8000 {
+ status = "okay";
+ usb-phy = <&usb3_phy>;
+ };
+
+ flash@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u_env";
+ reg = <0x200000 0x40000>; /* 256KB */
+ };
+
+ partition@140000 {
+ label = "s_env";
+ reg = <0x240000 0x40000>; /* 256KB */
+ };
+
+ partition@900000 {
+ label = "devinfo";
+ reg = <0x900000 0x100000>; /* 1MB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x2800000>; /* 40MB */
+ };
+
+ partition@1000000 {
+ label = "rootfs1";
+ reg = <0x1000000 0x2200000>; /* 34MB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@3200000 {
+ label = "kernel2";
+ reg = <0x3200000 0x2800000>; /* 40MB */
+ };
+
+ partition@3800000 {
+ label = "rootfs2";
+ reg = <0x3800000 0x2200000>; /* 34MB */
+ };
+
+ /*
+ * 38MB, last MB is for the BBT, not writable
+ */
+ partition@5a00000 {
+ label = "syscfg";
+ reg = <0x5a00000 0x2600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x280000 0x680000>; /* 6.5MB */
+ };
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ /* Marvell 88W8864, 5GHz-only */
+ status = "okay";
+ };
+
+ pcie@2,0 {
+ /* Marvell 88W8864, 2GHz-only */
+ status = "okay";
+ };
+ };
+ };
+
+ usb3_phy: usb3_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <®_xhci0_vbus>;
+ };
+
+ reg_xhci0_vbus: xhci0-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&xhci0_vbus_pins>;
+ regulator-name = "xhci0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&keys_pin>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+
+ button@2 {
+ label = "Factory Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&power_led_pin &sata_led_pin>;
+ pinctrl-names = "default";
+
+ power {
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ sata {
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <ð2>;
+ dsa,mii-bus = <&mdio>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ };
+ };
+ };
+};
+
+&pinctrl {
+ keys_pin: keys-pin {
+ marvell,pins = "mpp24", "mpp47";
+ marvell,function = "gpio";
+ };
+
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp55";
+ marvell,function = "gpio";
+ };
+
+ sata_led_pin: sata-led-pin {
+ marvell,pins = "mpp54";
+ marvell,function = "gpio";
+ };
+
+ xhci0_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp50";
+ marvell,function = "gpio";
+ };
+};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "w25q32";
+ compatible = "w25q32", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p128";
+ compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
m25p,fast-read;
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p128";
+ compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
spi0: spi@10600 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-380-spi",
+ "marvell,orion-spi";
reg = <0x10600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@10680 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-380-spi",
+ "marvell,orion-spi";
reg = <0x10680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- mdio@72004 {
+ mdio: mdio@72004 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "n25q128a13";
+ compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <108000000>;
};
spi0: spi@10600 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-390-spi",
+ "marvell,orion-spi";
reg = <0x10600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@10680 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-390-spi",
+ "marvell,orion-spi";
reg = <0x10680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q128a13";
+ compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "m25p64";
+ compatible = "m25p64", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q128a13";
+ compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
internal-regs {
+ rtc@10300 {
+ /* No crystal connected to the internal RTC */
+ status = "disabled";
+ };
serial@12000 {
status = "okay";
};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q064";
+ compatible = "micron,n25q064", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
};
spi0: spi@10600 {
+ compatible = "marvell,armada-xp-spi",
+ "marvell,orion-spi";
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
};
+ spi1: spi@10680 {
+ compatible = "marvell,armada-xp-spi",
+ "marvell,orion-spi";
+ };
+
+
i2c0: i2c@11000 {
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x100>;
reg = <0xe000e100 0xc00>;
};
+ systick: timer@e000e010 {
+ compatible = "arm,armv7m-systick";
+ reg = <0xe000e010 0x10>;
+ status = "disabled";
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
--- /dev/null
+/*
+ * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
+ * 2014-2015 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Overkiz Kizbox";
+ compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ linux,stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x2000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ macb0: ethernet@fffc4000 {
+ phy-mode = "mii";
+ pinctrl-0 = <&pinctrl_macb_rmii
+ &pinctrl_macb_rmii_mii_alt>;
+ status = "okay";
+ };
+
+ usart3: serial@fffd0000 {
+ status = "okay";
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ watchdog@fffffd40 {
+ timeout-sec = <15>;
+ atmel,max-heartbeat-sec = <16>;
+ atmel,min-heartbeat-sec = <0>;
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <1>;
+ status = "okay";
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+
+ user {
+ label = "PB_USER";
+ gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x101>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ rtc: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ network_green {
+ label = "pwm:green:network";
+ pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ network_red {
+ label = "pwm:red:network";
+ pwms = <&tcb_pwm 3 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ user_green {
+ label = "pwm:green:user";
+ pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ user_red {
+ label = "pwm:red:user";
+ pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ tcb_pwm: pwm {
+ compatible = "atmel,tcb-pwm";
+ #pwm-cells = <3>;
+ tc-block = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tcb1_tioa0
+ &pinctrl_tcb1_tioa1
+ &pinctrl_tcb1_tioa2
+ &pinctrl_tcb1_tiob0>;
+ };
+};
--- /dev/null
+/*
+ * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board
+ *
+ * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Overkiz Kizbox 2";
+ compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ linux,stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ i2c1: i2c@f0018000 {
+ status = "okay";
+
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ status = "okay";
+
+ regulators {
+ vcc_1v8_reg: DCDC_REG1 {
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_1v2_reg: DCDC_REG2 {
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_3v3_reg: DCDC_REG3 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddfuse_reg: LDO_REG1 {
+ regulator-name = "FUSE_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ vddana_reg: LDO_REG2 {
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vled_reg: LDO_REG3 {
+ regulator-name = "VLED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ v3v8_rf_reg: LDO_REG4 {
+ regulator-name = "V3V8_RF";
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ usart0: serial@f001c000 {
+ status = "okay";
+ };
+
+ usart1: serial@f0020000 {
+ status = "okay";
+ };
+
+ pwm0: pwm@f002c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+ &pinctrl_pwm0_pwmh1_1
+ &pinctrl_pwm0_pwmh2_0>;
+ status = "okay";
+ };
+
+ adc0: adc@f8018000 {
+ atmel,adc-vref = <3333>;
+ status = "okay";
+ };
+
+ usart2: serial@f8020000 {
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+
+ usb1: ohci@00600000 {
+ status = "okay";
+ };
+
+ usb2: ehci@00700000 {
+ status = "okay";
+ };
+
+ nand0: nand@60000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ prog {
+ label = "PB_PROG";
+ gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+ linux,code = <0x102>;
+ gpio-key,wakeup;
+ };
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+
+ user {
+ label = "PB_USER";
+ gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x101>;
+ gpio-key,wakeup;
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ blue {
+ label = "pwm:blue:user";
+ pwms = <&pwm0 2 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ green {
+ label = "pwm:green:user";
+ pwms = <&pwm0 1 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ red {
+ label = "pwm:red:user";
+ pwms = <&pwm0 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
--- /dev/null
+/*
+ * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
+ *
+ * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Overkiz Kizbox mini";
+ compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ linux,stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ usart0: serial@f801c000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ pwm0: pwm@f8034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+ &pinctrl_pwm0_pwm1_1>;
+ status = "okay";
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00600000 {
+ num-ports = <1>;
+ status = "okay";
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ prog {
+ label = "PB_PROG";
+ gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+ linux,code = <0x102>;
+ gpio-key,wakeup;
+ };
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ green {
+ label = "pwm:green:user";
+ pwms = <&pwm0 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ red {
+ label = "pwm:red:user";
+ pwms = <&pwm0 1 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
apb {
mmc0: mmc@f0000000 {
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+ vmmc-supply = <&vcc_mmc0_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
status = "okay";
slot@0 {
reg = <0>;
};
};
+ mmc1: mmc@f8000000 {
+ vmmc-supply = <&vcc_3v3_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
+ status = "disabled";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
spi0: spi@f0004000 {
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
status = "okay";
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
+
+ ethernet-phy@7 {
+ reg = <0x7>;
+ };
};
pwm0: pwm@f002c000 {
};
};
};
-
- pmc: pmc@fffffc00 {
- main: mainck {
- clock-frequency = <12000000>;
- };
- };
};
nand0: nand@60000000 {
};
};
+ vcc_mmc0_reg: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+ regulator-name = "mmc0-card-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
gpio_keys {
compatible = "gpio-keys";
mmc1: mmc@fc000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ vmmc-supply = <&vcc_mmc1_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
status = "okay";
slot@0 {
reg = <0>;
status = "okay";
};
+ spi1: spi@fc018000 {
+ cs-gpios = <&pioB 21 0>;
+ status = "okay";
+ };
+
adc0: adc@fc034000 {
atmel,adc-vref = <3300>;
status = "okay";
linux,default-trigger = "heartbeat";
};
};
+
+ vcc_3v3_reg: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC 3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_mmc1_reg: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+ regulator-name = "VDD MCI1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_reg>;
+ };
};
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&ohci_clk>, <&hclk0>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00a00000 0x100000>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
};
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
- <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
};
};
- pmc: pmc@fffffc00 {
- main: mainck {
- clock-frequency = <12000000>;
- };
- };
-
watchdog@fffffd40 {
status = "okay";
};
pinctrl_usart1_sck: usart1_sck-0 {
atmel,pins =
- <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */
+ <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */
};
};
};
};
+ pwm0 {
+ pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+ atmel,pins =
+ <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+ atmel,pins =
+ <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+ atmel,pins =
+ <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+ atmel,pins =
+ <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+ atmel,pins =
+ <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+ atmel,pins =
+ <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+ atmel,pins =
+ <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+ atmel,pins =
+ <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+ atmel,pins =
+ <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+ atmel,pins =
+ <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ };
+
tcb0 {
pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ehci_clk", "uhpck";
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
/dts-v1/;
-/include/ "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi.dtsi"
/ {
compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
/* I2S interface */
i2s_alt0: i2s_alt0 {
brcm,pins = <18 19 20 21>;
- brcm,function = <4>; /* alt0 */
+ brcm,function = <BCM2835_FSEL_ALT0>;
};
};
/dts-v1/;
-/include/ "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi.dtsi"
/ {
compatible = "raspberrypi,model-b", "brcm,bcm2835";
/* I2S interface */
i2s_alt2: i2s_alt2 {
brcm,pins = <28 29 30 31>;
- brcm,function = <6>; /* alt2 */
+ brcm,function = <BCM2835_FSEL_ALT2>;
};
};
-/include/ "bcm2835.dtsi"
+#include "bcm2835.dtsi"
/ {
memory {
gpioout: gpioout {
brcm,pins = <6>;
- brcm,function = <1>; /* GPIO out */
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
};
alt0: alt0 {
brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
- brcm,function = <4>; /* alt0 */
+ brcm,function = <BCM2835_FSEL_ALT0>;
};
alt3: alt3 {
brcm,pins = <48 49 50 51 52 53>;
- brcm,function = <7>; /* alt3 */
+ brcm,function = <BCM2835_FSEL_ALT3>;
};
};
-/include/ "skeleton.dtsi"
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include "skeleton.dtsi"
/ {
compatible = "brcm,bcm2835";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x7e000000 0x20000000 0x02000000>;
+ dma-ranges = <0x40000000 0x00000000 0x20000000>;
timer@7e003000 {
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e104000 0x10>;
};
+ mailbox: mailbox@7e00b800 {
+ compatible = "brcm,bcm2835-mbox";
+ reg = <0x7e00b880 0x40>;
+ interrupts = <0 1>;
+ #mbox-cells = <0>;
+ };
+
gpio: gpio@7e200000 {
compatible = "brcm,bcm2835-gpio";
reg = <0x7e200000 0xb4>;
status = "disabled";
};
- i2c0: i2c@20205000 {
+ i2c0: i2c@7e205000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e205000 0x1000>;
interrupts = <2 21>;
*
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
* based on GPL'ed 2.6 kernel sources
* (c) Marvell International Ltd.
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
*
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
* based on GPL'ed 2.6 kernel sources
* (c) Marvell International Ltd.
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
/*
* Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
* Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/clock/berlin2q.h>
clocks = <&main_clk>;
};
+ rtc@f0000c30 {
+ compatible = "cnxt,cx92755-rtc";
+ reg = <0xf0000c30 0x18>;
+ interrupts = <25>;
+ };
+
uc_regs: syscon@f00003a0 {
compatible = "cnxt,cx92755-uc", "syscon";
reg = <0xf00003a0 0x10>;
interrupts = <46>;
status = "disabled";
};
+
+ i2c: i2c@f0000120 {
+ compatible = "cnxt,cx92755-i2c";
+ reg = <0xf0000120 0x10>;
+ interrupts = <28>;
+ clocks = <&main_clk>;
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
&uart0 {
status = "okay";
};
+
+&i2c {
+ status = "okay";
+};
+++ /dev/null
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
- model = "Compulab CM-A510";
- compatible = "compulab,cm-a510", "marvell,dove";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x40000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- };
-};
-
-&uart0 { status = "okay"; };
-&uart1 { status = "okay"; };
-&sdio0 { status = "okay"; };
-&sdio1 { status = "okay"; };
-&sata0 { status = "okay"; };
-
-&spi0 {
- status = "okay";
-
- /* spi0.0: 4M Flash Winbond W25Q32BV */
- spi-flash@0 {
- compatible = "st,w25q32";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
-};
-
-&i2c0 {
- status = "okay";
-};
--- /dev/null
+/*
+ * Device Tree include for Compulab CM-A510 System-on-Module
+ *
+ * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The CM-A510 comes with several optional components:
+ *
+ * Memory options:
+ * D512: 512M
+ * D1024: 1G
+ *
+ * NAND options:
+ * N512: 512M NAND
+ *
+ * Ethernet options:
+ * E1: PHY RTL8211D on internal GbE (SMI address 0x03)
+ * E2: Additional ethernet NIC RTL8111D on PCIe1
+ *
+ * Audio options:
+ * A: TI TLV320AIC23b audio codec (I2C address 0x1a)
+ *
+ * Touchscreen options:
+ * I: TI TSC2046 touchscreen controller (on SPI1)
+ *
+ * USB options:
+ * U2: 2 dual-role USB2.0 ports
+ * U4: 2 additional USB2.0 host ports (via USB1)
+ *
+ * WiFi options:
+ * W: Broadcom BCM4319 802.11b/g/n (USI WM-N-BM-01 on SDIO1)
+ *
+ * GPIOs used on CM-A510:
+ * 1 GbE PHY reset (active low)
+ * 3 WakeUp
+ * 8 PowerOff (active low)
+ * 13 Touchscreen pen irq (active low)
+ * 65 System LED (active high)
+ * 69 USB Hub reset (active low)
+ * 70 WLAN reset (active low)
+ * 71 WLAN regulator (active high)
+ */
+
+#include "dove.dtsi"
+
+/ {
+ model = "Compulab CM-A510";
+ compatible = "compulab,cm-a510", "marvell,dove";
+
+ /*
+ * Set the minimum memory size here and let the
+ * bootloader set the real size.
+ */
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ /* Set upper NAND data bit to GPO */
+ pinctrl-0 = <&pmx_nand_gpo>;
+ pinctrl-names = "default";
+
+ system {
+ label = "cm-a510:system:green";
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi_power: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "WiFi Power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+/* Optional RTL8211D GbE PHY on SMI address 0x03 */
+ðphy {
+ reg = <3>;
+ status = "disabled";
+};
+
+&i2c0 {
+ /* Optional TI TLV320AIC23b audio codec */
+ opt_audio: audio@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ status = "disabled";
+ };
+};
+
+/* Optional RTL8111D GbE NIC on PCIe1 */
+&pcie { status = "disabled"; };
+
+&pcie1 {
+ pinctrl-0 = <&pmx_pcie1_clkreq>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+&pinctrl {
+ pmx_uart2: pmx-uart2 {
+ marvell,pins = "mpp14", "mpp15";
+ marvell,function = "uart2";
+ };
+};
+
+/* Optional Broadcom BCM4319 802.11b/g/n WiFi module */
+&sdio1 {
+ non-removable;
+ vmmc-supply = <&wifi_power>;
+ reset-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+};
+
+&spi0 {
+ status = "okay";
+
+ /* 1M Flash Winbond W25Q80BL */
+ flash@0 {
+ compatible = "winbond,w25q80";
+ spi-max-frequency = <80000000>;
+ reg = <0>;
+ };
+};
+
+&spi1 {
+ pinctrl-0 = <&pmx_spi1_20_23>;
+ pinctrl-names = "default";
+ status = "disabled";
+
+ /* Optional TI TSC2046 touchscreen controller */
+ opt_touch: touchscreen@0 {
+ compatible = "ti,tsc2046";
+ spi-max-frequency = <2500000>;
+ reg = <0>;
+ pinctrl-0 = <&pmx_gpio_13>;
+ pinctrl-names = "default";
+ interrupts-extended = <&gpio0 13 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&uart2 {
+ pinctrl-0 = <&pmx_uart2>;
+ pinctrl-names = "default";
+};
--- /dev/null
+/*
+ * Device Tree file for Compulab SBC-A510 Single Board Computer
+ *
+ * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * SBC-A510 comprises a PCA9555 I2C GPIO expander its GPIO lines connected to
+ *
+ * 0.0 USB0 VBUS_EN (active high)
+ * 0.1 USB0 VBUS_GOOD
+ * 0.2 DVI transmitter TI TFP410 MSEN
+ * 0.3 DVI transmitter TI TFP410 PD# (active low power down)
+ * 0.4 LVDS transmitter DS90C365 PD# (active low power down)
+ * 0.5 LCD nRST (active low reset)
+ * 0.6 PCIe0 nRST (active low reset)
+ * 0.7 mini-PCIe slot W_DISABLE#
+ *
+ * 1.0 MMC WP
+ * 1.1 Camera Input FPC FLASH_STB and P21.5
+ * 1.2 Camera Input FPC WE and P21.22
+ * 1.3 MMC VCC_EN (active high) and P21.7
+ * 1.4 Camera Input FPC AFTR_RST and P21.17
+ * 1.5 Camera Input FPC OE and P21.19
+ * 1.6 Camera Input FPC SNPSHT and P21.6
+ * 1.7 Camera Input FPC SHTR and P21.10
+ */
+
+/dts-v1/;
+
+#include "dove-cm-a510.dtsi"
+
+/ {
+ model = "Compulab SBC-A510";
+ compatible = "compulab,sbc-a510", "compulab,cm-a510", "marvell,dove";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ regulators {
+ usb0_power: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ mmc_power: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "MMC Power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+/* Ethernet0 depends on CM-A510 option E1 */
+&mdio { status = "disabled"; };
+ð { status = "disabled"; };
+ðphy { status = "disabled"; };
+
+/*
+ * USB port 0 can be powered and monitored by I2C GPIO expander:
+ * VBUS_ENABLE on GPIO0, VBUS_GOOD on GPIO1
+ */
+&ehci0 {
+ status = "okay";
+ vbus-supply = <&usb0_power>;
+};
+
+/* USB port 1 (and ports 2, 3 if CM-A510 has U4 option) */
+&ehci1 { status = "okay"; };
+
+/*
+ * I2C bus layout:
+ * i2c0:
+ * - Audio Codec, 0x1a (option from CM-A510)
+ * - DVI transmitter TI TFP410, 0x39
+ * - HDMI/DVI DDC channel
+ * i2c1:
+ * - GPIO expander, NXP PCA9555, 0x20
+ * - VGA DDC channel
+ */
+&i2c {
+ pinctrl-0 = <&pmx_i2c1>;
+ pinctrl-names = "default";
+};
+
+&i2c0 {
+ /* TI TFP410 DVI transmitter */
+ dvi: video@39 {
+ compatible = "ti,tfp410";
+ reg = <0x39>;
+ powerdown-gpio = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* NXP PCA9555 GPIO expander */
+ gpio_ext: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ };
+};
+
+&pcie { status = "okay"; };
+
+/*
+ * PCIe0 can be configured by Jumper E1 to be either connected to
+ * a mini-PCIe slot or a Pericom PI7C9X111 PCIe-to-PCI bridge.
+ */
+&pcie0 {
+ status = "okay";
+ pinctrl-0 = <&pmx_pcie0_clkreq>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>;
+};
+
+/* Ethernet1 depends on CM-A510 option E2 */
+&pcie1 { status = "disabled"; };
+
+/* SATA connector */
+&sata0 { status = "okay"; };
+
+/*
+ * SDIO0 is connected to a MMC/SD/SDIO socket, I2C GPIO expander has
+ * VCC_MMC_ENABLE on GPIO13, MMC_WP on GPIO10
+ */
+&sdio0 {
+ vmmc-supply = <&mmc_power>;
+ wp-gpios = <&gpio_ext 10 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* UART0 on RS232 mini-connector */
+&uart0 { status = "okay"; };
+/* UART2 on pin headers */
+&uart2 { status = "okay"; };
marvell,tauros2-cache-features = <0>;
};
+ i2c-mux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&i2c>;
+
+ pinctrl-names = "i2c0", "i2c1", "i2c2";
+ pinctrl-0 = <&pmx_i2cmux_0>;
+ pinctrl-1 = <&pmx_i2cmux_1>;
+ pinctrl-2 = <&pmx_i2cmux_2>;
+
+ i2c0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ };
+
+ i2c1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Requires pmx_i2c1 on i2c controller node */
+ status = "disabled";
+ };
+
+ i2c2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Requires pmx_i2c2 on i2c controller node */
+ status = "disabled";
+ };
+ };
+
mbus {
compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
#address-cells = <2>;
status = "disabled";
};
- i2c0: i2c-ctrl@11000 {
+ i2c: i2c-ctrl@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
clock-frequency = <400000>;
timeout-ms = <1000>;
clocks = <&core_clk 0>;
- status = "disabled";
+ status = "okay";
};
uart0: serial@12000 {
ti,clock-cycles = <16>;
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
- <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+ <0x4ae06014 0x4>, <0x4a003b20 0xc>,
<0x4ae0c158 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
ti,clock-cycles = <16>;
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
- <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+ <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
<0x4a002470 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
ti,clock-cycles = <16>;
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
- <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+ <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
<0x4a00246c 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
ti,clock-cycles = <16>;
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
- <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+ <0x4ae06010 0x4>, <0x4a003b08 0xc>,
<0x4ae0c154 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
status = "disabled";
};
- rtc@48838000 {
+ rtc: rtc@48838000 {
compatible = "ti,am3352-rtc";
reg = <0x48838000 0x100>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
regulator-boot-on;
};
- lan9220@20000000 {
+ ethernet@20000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x20000000 0x10000>;
phy-mode = "mii";
};
&pfc {
- uart1_pins: uart@e1030000 {
+ uart1_pins: serial@e1030000 {
renesas,groups = "uart1_ctrl", "uart1_data";
renesas,function = "uart1";
};
#include <dt-bindings/sound/samsung-i2s.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/maxim,max77686.h>
#include "exynos4412.dtsi"
/ {
rtc@10070000 {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
};
g2d@10800000 {
num-slots = <1>;
broken-cd;
cap-sdio-irq;
+ keep-power-in-suspend;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
type = "active";
};
cpu-crit-0 {
- temperature = <1200000>; /* millicelsius */
+ temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
+ power-domains = <&disp_pd>;
};
mipi_phy: video-phy@10040714 {
type = "active";
};
cpu-crit-0 {
- temperature = <1050000>; /* millicelsius */
+ temperature = <105000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
uart0: uart@4007000 {
status = "ok";
};
+
+ nand: nand@4020000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <16>;
+ nand-ecc-step-size = <1024>;
+
+ partition@0 {
+ label = "nand_text";
+ reg = <0x00000000 0x00400000>;
+ };
+
+ partition@00400000 {
+ label = "nand_monitor";
+ reg = <0x00400000 0x00400000>;
+ };
+
+ partition@00800000 {
+ label = "nand_kernel";
+ reg = <0x00800000 0x00800000>;
+ };
+
+ partition@01000000 {
+ label = "nand_fs";
+ reg = <0x01000000 0x1f000000>;
+ };
+ };
};
};
interrupts = <0 372 4>;
};
+ gpio@4003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x4003000 0x1000>;
+
+ gpio3: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 392 4>;
+ };
+ };
+
+ gpio@4002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x4002000 0x1000>;
+
+ gpio2: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 391 4>;
+ };
+ };
+
+ gpio@4001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x4001000 0x1000>;
+
+ gpio1: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 390 4>;
+ };
+ };
+
+ gpio@4000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x4000000 0x1000>;
+
+ gpio0: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 389 4>;
+ };
+ };
+
+ nand: nand@4020000 {
+ compatible = "hisilicon,504-nfc";
+ reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
+ interrupts = <0 379 4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ mdio {
+ compatible = "hisilicon,hip04-mdio";
+ reg = <0x28f1000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ marvell,reg-init = <18 0x14 0 0x8001>;
+ };
+
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ marvell,reg-init = <18 0x14 0 0x8001>;
+ };
+ };
+
+ ppe: ppe@28c0000 {
+ compatible = "hisilicon,hip04-ppe", "syscon";
+ reg = <0x28c0000 0x10000>;
+ };
+
+ fe: ethernet@28b0000 {
+ compatible = "hisilicon,hip04-mac";
+ reg = <0x28b0000 0x10000>;
+ interrupts = <0 413 4>;
+ phy-mode = "mii";
+ port-handle = <&ppe 31 0>;
+ };
+
+ ge0: ethernet@2800000 {
+ compatible = "hisilicon,hip04-mac";
+ reg = <0x2800000 0x10000>;
+ interrupts = <0 402 4>;
+ phy-mode = "sgmii";
+ port-handle = <&ppe 0 1>;
+ phy-handle = <&phy0>;
+ };
+
+ ge8: ethernet@2880000 {
+ compatible = "hisilicon,hip04-mac";
+ reg = <0x2880000 0x10000>;
+ interrupts = <0 410 4>;
+ phy-mode = "sgmii";
+ port-handle = <&ppe 8 2>;
+ phy-handle = <&phy1>;
+ };
};
etb@0,e3c42000 {
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx23.dtsi"
/ {
ahb@80080000 {
usb0: usb@80080000 {
+ dr_mode = "host";
vbus-supply = <®_usb0_vbus>;
status = "okay";
};
user {
label = "green";
- gpios = <&gpio2 1 1>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
};
};
};
pwm4: pwm@53fc8000 {
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
reg = <0x53fc8000 0x4000>;
clocks = <&clks 108>, <&clks 52>;
clock-names = "ipg", "per";
80 81 68 69
70 71 72 73
74 75 76 77>;
- interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+ interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
"saif0", "saif1", "i2c0", "i2c1",
"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 15 0>;
+ enable-active-high;
};
reg_usb_h1_vbus: regulator@1 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 0 0>;
+ enable-active-high;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
- pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
status = "okay";
max7310_a: gpio@30 {
m25p16@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p16";
+ compatible = "st,m25p16", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l4005a";
+ compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l12805d";
+ compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
m25p40@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l1606e";
+ compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
m25p40@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "m25p40";
+ compatible = "m25p40", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l12805d";
+ compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l4005a";
+ compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l4005a";
+ compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
m25p128@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p128";
+ compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p80";
+ compatible = "st,m25p80", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p80";
+ compatible = "st,m25p80", "jedec,spi-nor";
spi-max-frequency = <86000000>;
reg = <0>;
mode = <0>;
m25p128@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "m25p128";
+ compatible = "m25p128", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
+++ /dev/null
-/*
- * kizbox.dts - Device Tree file for Overkiz Kizbox board
- *
- * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-
- model = "Overkiz kizbox";
- compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
-
- chosen {
- bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root";
- };
-
- memory {
- reg = <0x20000000 0x2000000>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
- main_xtal {
- clock-frequency = <18432000>;
- };
- };
-
- ahb {
- apb {
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- usart0: serial@fffb0000 {
- status = "okay";
- };
-
- usart1: serial@fffb4000 {
- status = "okay";
- };
-
- macb0: ethernet@fffc4000 {
- phy-mode = "mii";
- pinctrl-0 = <&pinctrl_macb_rmii
- &pinctrl_macb_rmii_mii_alt>;
- status = "okay";
- };
-
- watchdog@fffffd40 {
- timeout-sec = <15>;
- atmel,max-heartbeat-sec = <16>;
- atmel,min-heartbeat-sec = <0>;
- status = "okay";
- };
- };
-
- nand0: nand@40000000 {
- nand-bus-width = <8>;
- nand-ecc-mode = "soft";
- status = "okay";
-
- bootloaderkernel@0 {
- label = "bootloader-kernel";
- reg = <0x0 0xc0000>;
- };
-
- ubi@c0000 {
- label = "ubi";
- reg = <0xc0000 0x7f40000>;
- };
-
- };
-
- usb0: ohci@00500000 {
- num-ports = <1>;
- status = "okay";
- };
- };
-
- i2c@0 {
- status = "okay";
-
- pcf8563@51 {
- /* nxp pcf8563 rtc */
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-
- };
-
- leds {
- compatible = "gpio-leds";
-
- led1g {
- label = "led1:green";
- gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
- led1r {
- label = "led1:red";
- gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
- led2g {
- label = "led2:green";
- gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- default-state = "on";
- };
-
- led2r {
- label = "led2:red";
- gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset {
- label = "reset";
- gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
- linux,code = <0x100>;
- gpio-key,wakeup;
- };
-
- mode {
- label = "mode";
- gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
- linux,code = <0x101>;
- gpio-key,wakeup;
- };
- };
-};
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-torpedo-som.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+ model = "LogicPD Zoom DM3730 Torpedo Development Kit";
+ compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
+
+ sysboot2 {
+ label = "sysboot2";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
+ linux,code = <BTN_0>;
+ gpio-key,wakeup;
+ };
+
+ sysboot5 {
+ label = "sysboot5";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
+ linux,code = <BTN_1>;
+ gpio-key,wakeup;
+ };
+
+ gpio1 {
+ label = "gpio1";
+ gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
+ linux,code = <BTN_2>;
+ gpio-key,wakeup;
+ };
+
+ gpio2 {
+ label = "gpio2";
+ gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
+ linux,code = <BTN_3>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
+ linux,default-trigger = "cpu0";
+ };
+
+ led2 {
+ label = "led2";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
+ linux,default-trigger = "none";
+ };
+ };
+};
+
+&charger {
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+};
+
+&gpmc {
+ ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */
+
+ ethernet@gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan9221_pins>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
+ reg = <1 0 0xff>;
+ };
+};
+
+&mmc1 {
+ interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+ cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>; /* gpio127 */
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ cap-power-off-card;
+};
+
+&omap3_pmx_core {
+ gpio_key_pins: pinmux_gpio_key_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
+ >;
+ };
+
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
+ >;
+ };
+
+ lan9221_pins: pinmux_lan9221_pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
+ >;
+ };
+
+ mmc1_cd: pinmux_mmc1_cd {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
+ >;
+ };
+};
+
+&uart1 {
+ interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ user0 {
+ label = "user0";
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
+ linux,default-trigger = "none";
+ };
+ };
+
+ wl12xx_vmmc: wl12xx_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 29 0>; /* gpio157 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ vin-supply = <&vmmc2>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ linux,mtd-name = "micron,mt29f4g16abbda3w";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */
+
+ x-loader@0 {
+ label = "x-loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "u-boot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ bootloaders_env@260000 {
+ label = "u-boot-env";
+ reg = <0x260000 0x20000>;
+ };
+
+ kernel@280000 {
+ label = "kernel";
+ reg = <0x280000 0x400000>;
+ };
+
+ filesystem@680000 {
+ label = "fs";
+ reg = <0x680000 0>; /* 0 = MTDPART_SIZ_FULL */
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/*
+ * Only found on the wireless SOM. For the SOM without wireless, the pins for
+ * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
+ * gpio157 is not connected. So this should be OK to keep common for now,
+ * probably device tree overlays is the way to go with the various SOM and
+ * jumpering combinations for the long run.
+ */
+&mmc3 {
+ interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+ pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
+ pinctrl-names = "default";
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1283";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+ ref-clock-frequency = <26000000>;
+ };
+};
+
+&omap3_pmx_core {
+ mmc3_pins: pinmux_mm3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ mmc3_core2_pins: pinmux_mmc3_core2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ >;
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+ twl_power: power {
+ compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+ ti,use_poweroff;
+ };
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
--- /dev/null
+/*
+ * Common base for NXP LPC18xx and LPC43xx devices.
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-m3";
+ device_type = "cpu";
+ reg = <0x0>;
+ };
+ };
+
+ clocks {
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ /* Temporary hardcode PLL1 until clk drivers are merged */
+ pll1: pll1 {
+ compatible = "fixed-factor-clock";
+ clocks = <&xtal>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <12>;
+ };
+ };
+
+ soc {
+ uart0: serial@40081000 {
+ compatible = "ns16550a";
+ reg = <0x40081000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <24>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ uart1: serial@40082000 {
+ compatible = "ns16550a";
+ reg = <0x40082000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <25>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ timer0: timer@40084000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40084000 0x1000>;
+ interrupts = <12>;
+ clocks = <&pll1>;
+ clock-names = "timerclk";
+ };
+
+ timer1: timer@40085000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40085000 0x1000>;
+ interrupts = <13>;
+ clocks = <&pll1>;
+ clock-names = "timerclk";
+ };
+
+ uart2: serial@400c1000 {
+ compatible = "ns16550a";
+ reg = <0x400c1000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <26>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ uart3: serial@400c2000 {
+ compatible = "ns16550a";
+ reg = <0x400c2000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <27>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ timer2: timer@400c3000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x400c3000 0x1000>;
+ interrupts = <14>;
+ clocks = <&pll1>;
+ clock-names = "timerclk";
+ };
+
+ timer3: timer@400c4000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x400c4000 0x1000>;
+ interrupts = <15>;
+ clocks = <&pll1>;
+ clock-names = "timerclk";
+ };
+ };
+};
--- /dev/null
+/*
+ * Hitex LPC4350 Evaluation Board
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4350.dtsi"
+
+/ {
+ model = "Hitex LPC4350 Evaluation Board";
+ compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x28000000 0x800000>; /* 8 MB */
+ };
+};
+
+&pll1 {
+ clock-mult = <15>;
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * NXP LPC4350 and LPC4330 SoC
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+ compatible = "nxp,lpc4350", "nxp,lpc4330";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-m4";
+ };
+ };
+
+ soc {
+ sram0: sram@10000000 {
+ compatible = "mmio-sram";
+ reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
+ };
+
+ sram1: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
+ };
+
+ sram2: sram@20000000 {
+ compatible = "mmio-sram";
+ reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+ };
+ };
+};
--- /dev/null
+/*
+ * Embedded Artist LPC4357 Developer's Kit
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+/ {
+ model = "Embedded Artists' LPC4357 Developer's Kit";
+ compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x28000000 0x2000000>; /* 32 MB */
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * NXP LPC435x, LPC433x, LPC4327, LPC4325, LPC4317 and LPC4315 SoC
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+ compatible = "nxp,lpc4357";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-m4";
+ };
+ };
+
+ soc {
+ sram0: sram@10000000 {
+ compatible = "mmio-sram";
+ reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+ };
+
+ sram1: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+ };
+
+ sram2: sram@20000000 {
+ compatible = "mmio-sram";
+ reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+ };
+ };
+};
<0 0x10216000 0 0x2000>;
};
- uart0: serial@11006000 {
+ uart0: serial@11002000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
};
- uart1: serial@11007000 {
+ uart1: serial@11003000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
};
- uart2: serial@11008000 {
+ uart2: serial@11004000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
};
- uart3: serial@11009000 {
+ uart3: serial@11005000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
--- /dev/null
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DTS_MT8135_PINFUNC_H
+#define __DTS_MT8135_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(0) | 1)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_EINT49 (MTK_PIN_NO(0) | 2)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_I2SOUT_DAT (MTK_PIN_NO(0) | 3)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_DAC_DAT_OUT (MTK_PIN_NO(0) | 4)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_PCM1_DO (MTK_PIN_NO(0) | 5)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_SPI1_MO (MTK_PIN_NO(0) | 6)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_NALE (MTK_PIN_NO(0) | 7)
+
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(1) | 1)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_EINT48 (MTK_PIN_NO(1) | 2)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_I2SIN_WS (MTK_PIN_NO(1) | 3)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_DAC_WS (MTK_PIN_NO(1) | 4)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_PCM1_WS (MTK_PIN_NO(1) | 5)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_SPI1_CSN (MTK_PIN_NO(1) | 6)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_NCLE (MTK_PIN_NO(1) | 7)
+
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(2) | 1)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_EINT47 (MTK_PIN_NO(2) | 2)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_I2SIN_CK (MTK_PIN_NO(2) | 3)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_DAC_CK (MTK_PIN_NO(2) | 4)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_PCM1_CK (MTK_PIN_NO(2) | 5)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_SPI1_CLK (MTK_PIN_NO(2) | 6)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(2) | 7)
+
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(3) | 1)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_EINT46 (MTK_PIN_NO(3) | 2)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_A_FUNC_CK (MTK_PIN_NO(3) | 3)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_LSCE1B_2X (MTK_PIN_NO(3) | 6)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_NLD5 (MTK_PIN_NO(3) | 7)
+
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(4) | 1)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_EINT41 (MTK_PIN_NO(4) | 2)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_A_FUNC_DOUT_0 (MTK_PIN_NO(4) | 3)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_USB_TEST_IO_0 (MTK_PIN_NO(4) | 5)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_LRSTB_2X (MTK_PIN_NO(4) | 6)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_NRNB (MTK_PIN_NO(4) | 7)
+
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(5) | 1)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_EINT40 (MTK_PIN_NO(5) | 2)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_A_FUNC_DOUT_1 (MTK_PIN_NO(5) | 3)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_USB_TEST_IO_1 (MTK_PIN_NO(5) | 5)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_LPTE (MTK_PIN_NO(5) | 6)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_NREB (MTK_PIN_NO(5) | 7)
+
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(6) | 1)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_EINT45 (MTK_PIN_NO(6) | 2)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_A_FUNC_DOUT_2 (MTK_PIN_NO(6) | 3)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_USB_TEST_IO_2 (MTK_PIN_NO(6) | 5)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_LSCE0B_2X (MTK_PIN_NO(6) | 6)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_NLD7 (MTK_PIN_NO(6) | 7)
+
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(7) | 1)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_EINT44 (MTK_PIN_NO(7) | 2)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_A_FUNC_DOUT_3 (MTK_PIN_NO(7) | 3)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_USB_TEST_IO_3 (MTK_PIN_NO(7) | 5)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_LSA0_2X (MTK_PIN_NO(7) | 6)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_NLD14 (MTK_PIN_NO(7) | 7)
+
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(8) | 1)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_EINT43 (MTK_PIN_NO(8) | 2)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_USB_TEST_IO_4 (MTK_PIN_NO(8) | 5)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_LSCK_2X (MTK_PIN_NO(8) | 6)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_NLD11 (MTK_PIN_NO(8) | 7)
+
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(9) | 1)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_EINT42 (MTK_PIN_NO(9) | 2)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_USB_TEST_IO_5 (MTK_PIN_NO(9) | 5)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_LSDA_2X (MTK_PIN_NO(9) | 6)
+
+#define MT8135_PIN_10_NCEB0__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8135_PIN_10_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(10) | 1)
+#define MT8135_PIN_10_NCEB0__FUNC_EINT139 (MTK_PIN_NO(10) | 2)
+#define MT8135_PIN_10_NCEB0__FUNC_TESTA_OUT4 (MTK_PIN_NO(10) | 7)
+
+#define MT8135_PIN_11_NCEB1__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8135_PIN_11_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(11) | 1)
+#define MT8135_PIN_11_NCEB1__FUNC_EINT140 (MTK_PIN_NO(11) | 2)
+#define MT8135_PIN_11_NCEB1__FUNC_USB_DRVVBUS (MTK_PIN_NO(11) | 6)
+#define MT8135_PIN_11_NCEB1__FUNC_TESTA_OUT5 (MTK_PIN_NO(11) | 7)
+
+#define MT8135_PIN_12_NRNB__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8135_PIN_12_NRNB__FUNC_NRNB (MTK_PIN_NO(12) | 1)
+#define MT8135_PIN_12_NRNB__FUNC_EINT141 (MTK_PIN_NO(12) | 2)
+#define MT8135_PIN_12_NRNB__FUNC_A_FUNC_DOUT_4 (MTK_PIN_NO(12) | 3)
+#define MT8135_PIN_12_NRNB__FUNC_TESTA_OUT6 (MTK_PIN_NO(12) | 7)
+
+#define MT8135_PIN_13_NCLE__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8135_PIN_13_NCLE__FUNC_NCLE (MTK_PIN_NO(13) | 1)
+#define MT8135_PIN_13_NCLE__FUNC_EINT142 (MTK_PIN_NO(13) | 2)
+#define MT8135_PIN_13_NCLE__FUNC_A_FUNC_DOUT_5 (MTK_PIN_NO(13) | 3)
+#define MT8135_PIN_13_NCLE__FUNC_CM2PDN_1X (MTK_PIN_NO(13) | 4)
+#define MT8135_PIN_13_NCLE__FUNC_NALE (MTK_PIN_NO(13) | 6)
+#define MT8135_PIN_13_NCLE__FUNC_TESTA_OUT7 (MTK_PIN_NO(13) | 7)
+
+#define MT8135_PIN_14_NALE__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8135_PIN_14_NALE__FUNC_NALE (MTK_PIN_NO(14) | 1)
+#define MT8135_PIN_14_NALE__FUNC_EINT143 (MTK_PIN_NO(14) | 2)
+#define MT8135_PIN_14_NALE__FUNC_A_FUNC_DOUT_6 (MTK_PIN_NO(14) | 3)
+#define MT8135_PIN_14_NALE__FUNC_CM2MCLK_1X (MTK_PIN_NO(14) | 4)
+#define MT8135_PIN_14_NALE__FUNC_IRDA_RXD (MTK_PIN_NO(14) | 5)
+#define MT8135_PIN_14_NALE__FUNC_NCLE (MTK_PIN_NO(14) | 6)
+#define MT8135_PIN_14_NALE__FUNC_TESTA_OUT8 (MTK_PIN_NO(14) | 7)
+
+#define MT8135_PIN_15_NREB__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8135_PIN_15_NREB__FUNC_NREB (MTK_PIN_NO(15) | 1)
+#define MT8135_PIN_15_NREB__FUNC_EINT144 (MTK_PIN_NO(15) | 2)
+#define MT8135_PIN_15_NREB__FUNC_A_FUNC_DOUT_7 (MTK_PIN_NO(15) | 3)
+#define MT8135_PIN_15_NREB__FUNC_CM2RST_1X (MTK_PIN_NO(15) | 4)
+#define MT8135_PIN_15_NREB__FUNC_IRDA_TXD (MTK_PIN_NO(15) | 5)
+#define MT8135_PIN_15_NREB__FUNC_TESTA_OUT9 (MTK_PIN_NO(15) | 7)
+
+#define MT8135_PIN_16_NWEB__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8135_PIN_16_NWEB__FUNC_NWEB (MTK_PIN_NO(16) | 1)
+#define MT8135_PIN_16_NWEB__FUNC_EINT145 (MTK_PIN_NO(16) | 2)
+#define MT8135_PIN_16_NWEB__FUNC_A_FUNC_DIN_0 (MTK_PIN_NO(16) | 3)
+#define MT8135_PIN_16_NWEB__FUNC_CM2PCLK_1X (MTK_PIN_NO(16) | 4)
+#define MT8135_PIN_16_NWEB__FUNC_IRDA_PDN (MTK_PIN_NO(16) | 5)
+#define MT8135_PIN_16_NWEB__FUNC_TESTA_OUT10 (MTK_PIN_NO(16) | 7)
+
+#define MT8135_PIN_17_NLD0__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8135_PIN_17_NLD0__FUNC_NLD0 (MTK_PIN_NO(17) | 1)
+#define MT8135_PIN_17_NLD0__FUNC_EINT146 (MTK_PIN_NO(17) | 2)
+#define MT8135_PIN_17_NLD0__FUNC_A_FUNC_DIN_1 (MTK_PIN_NO(17) | 3)
+#define MT8135_PIN_17_NLD0__FUNC_CM2DAT_1X_0 (MTK_PIN_NO(17) | 4)
+#define MT8135_PIN_17_NLD0__FUNC_I2SIN_CK (MTK_PIN_NO(17) | 5)
+#define MT8135_PIN_17_NLD0__FUNC_DAC_CK (MTK_PIN_NO(17) | 6)
+#define MT8135_PIN_17_NLD0__FUNC_TESTA_OUT11 (MTK_PIN_NO(17) | 7)
+
+#define MT8135_PIN_18_NLD1__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8135_PIN_18_NLD1__FUNC_NLD1 (MTK_PIN_NO(18) | 1)
+#define MT8135_PIN_18_NLD1__FUNC_EINT147 (MTK_PIN_NO(18) | 2)
+#define MT8135_PIN_18_NLD1__FUNC_A_FUNC_DIN_2 (MTK_PIN_NO(18) | 3)
+#define MT8135_PIN_18_NLD1__FUNC_CM2DAT_1X_1 (MTK_PIN_NO(18) | 4)
+#define MT8135_PIN_18_NLD1__FUNC_I2SIN_WS (MTK_PIN_NO(18) | 5)
+#define MT8135_PIN_18_NLD1__FUNC_DAC_WS (MTK_PIN_NO(18) | 6)
+#define MT8135_PIN_18_NLD1__FUNC_TESTA_OUT12 (MTK_PIN_NO(18) | 7)
+
+#define MT8135_PIN_19_NLD2__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8135_PIN_19_NLD2__FUNC_NLD2 (MTK_PIN_NO(19) | 1)
+#define MT8135_PIN_19_NLD2__FUNC_EINT148 (MTK_PIN_NO(19) | 2)
+#define MT8135_PIN_19_NLD2__FUNC_A_FUNC_DIN_3 (MTK_PIN_NO(19) | 3)
+#define MT8135_PIN_19_NLD2__FUNC_CM2DAT_1X_2 (MTK_PIN_NO(19) | 4)
+#define MT8135_PIN_19_NLD2__FUNC_I2SOUT_DAT (MTK_PIN_NO(19) | 5)
+#define MT8135_PIN_19_NLD2__FUNC_DAC_DAT_OUT (MTK_PIN_NO(19) | 6)
+#define MT8135_PIN_19_NLD2__FUNC_TESTA_OUT13 (MTK_PIN_NO(19) | 7)
+
+#define MT8135_PIN_20_NLD3__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8135_PIN_20_NLD3__FUNC_NLD3 (MTK_PIN_NO(20) | 1)
+#define MT8135_PIN_20_NLD3__FUNC_EINT149 (MTK_PIN_NO(20) | 2)
+#define MT8135_PIN_20_NLD3__FUNC_A_FUNC_DIN_4 (MTK_PIN_NO(20) | 3)
+#define MT8135_PIN_20_NLD3__FUNC_CM2DAT_1X_3 (MTK_PIN_NO(20) | 4)
+#define MT8135_PIN_20_NLD3__FUNC_TESTA_OUT14 (MTK_PIN_NO(20) | 7)
+
+#define MT8135_PIN_21_NLD4__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8135_PIN_21_NLD4__FUNC_NLD4 (MTK_PIN_NO(21) | 1)
+#define MT8135_PIN_21_NLD4__FUNC_EINT150 (MTK_PIN_NO(21) | 2)
+#define MT8135_PIN_21_NLD4__FUNC_A_FUNC_DIN_5 (MTK_PIN_NO(21) | 3)
+#define MT8135_PIN_21_NLD4__FUNC_CM2DAT_1X_4 (MTK_PIN_NO(21) | 4)
+#define MT8135_PIN_21_NLD4__FUNC_TESTA_OUT15 (MTK_PIN_NO(21) | 7)
+
+#define MT8135_PIN_22_NLD5__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8135_PIN_22_NLD5__FUNC_NLD5 (MTK_PIN_NO(22) | 1)
+#define MT8135_PIN_22_NLD5__FUNC_EINT151 (MTK_PIN_NO(22) | 2)
+#define MT8135_PIN_22_NLD5__FUNC_A_FUNC_DIN_6 (MTK_PIN_NO(22) | 3)
+#define MT8135_PIN_22_NLD5__FUNC_CM2DAT_1X_5 (MTK_PIN_NO(22) | 4)
+#define MT8135_PIN_22_NLD5__FUNC_TESTA_OUT16 (MTK_PIN_NO(22) | 7)
+
+#define MT8135_PIN_23_NLD6__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8135_PIN_23_NLD6__FUNC_NLD6 (MTK_PIN_NO(23) | 1)
+#define MT8135_PIN_23_NLD6__FUNC_EINT152 (MTK_PIN_NO(23) | 2)
+#define MT8135_PIN_23_NLD6__FUNC_A_FUNC_DIN_7 (MTK_PIN_NO(23) | 3)
+#define MT8135_PIN_23_NLD6__FUNC_CM2DAT_1X_6 (MTK_PIN_NO(23) | 4)
+#define MT8135_PIN_23_NLD6__FUNC_TESTA_OUT17 (MTK_PIN_NO(23) | 7)
+
+#define MT8135_PIN_24_NLD7__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8135_PIN_24_NLD7__FUNC_NLD7 (MTK_PIN_NO(24) | 1)
+#define MT8135_PIN_24_NLD7__FUNC_EINT153 (MTK_PIN_NO(24) | 2)
+#define MT8135_PIN_24_NLD7__FUNC_A_FUNC_DIN_8 (MTK_PIN_NO(24) | 3)
+#define MT8135_PIN_24_NLD7__FUNC_CM2DAT_1X_7 (MTK_PIN_NO(24) | 4)
+#define MT8135_PIN_24_NLD7__FUNC_TESTA_OUT18 (MTK_PIN_NO(24) | 7)
+
+#define MT8135_PIN_25_NLD8__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8135_PIN_25_NLD8__FUNC_NLD8 (MTK_PIN_NO(25) | 1)
+#define MT8135_PIN_25_NLD8__FUNC_EINT154 (MTK_PIN_NO(25) | 2)
+#define MT8135_PIN_25_NLD8__FUNC_CM2DAT_1X_8 (MTK_PIN_NO(25) | 4)
+
+#define MT8135_PIN_26_NLD9__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8135_PIN_26_NLD9__FUNC_NLD9 (MTK_PIN_NO(26) | 1)
+#define MT8135_PIN_26_NLD9__FUNC_EINT155 (MTK_PIN_NO(26) | 2)
+#define MT8135_PIN_26_NLD9__FUNC_CM2DAT_1X_9 (MTK_PIN_NO(26) | 4)
+#define MT8135_PIN_26_NLD9__FUNC_PWM1 (MTK_PIN_NO(26) | 5)
+
+#define MT8135_PIN_27_NLD10__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8135_PIN_27_NLD10__FUNC_NLD10 (MTK_PIN_NO(27) | 1)
+#define MT8135_PIN_27_NLD10__FUNC_EINT156 (MTK_PIN_NO(27) | 2)
+#define MT8135_PIN_27_NLD10__FUNC_CM2VSYNC_1X (MTK_PIN_NO(27) | 4)
+#define MT8135_PIN_27_NLD10__FUNC_PWM2 (MTK_PIN_NO(27) | 5)
+
+#define MT8135_PIN_28_NLD11__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8135_PIN_28_NLD11__FUNC_NLD11 (MTK_PIN_NO(28) | 1)
+#define MT8135_PIN_28_NLD11__FUNC_EINT157 (MTK_PIN_NO(28) | 2)
+#define MT8135_PIN_28_NLD11__FUNC_CM2HSYNC_1X (MTK_PIN_NO(28) | 4)
+#define MT8135_PIN_28_NLD11__FUNC_PWM3 (MTK_PIN_NO(28) | 5)
+
+#define MT8135_PIN_29_NLD12__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8135_PIN_29_NLD12__FUNC_NLD12 (MTK_PIN_NO(29) | 1)
+#define MT8135_PIN_29_NLD12__FUNC_EINT158 (MTK_PIN_NO(29) | 2)
+#define MT8135_PIN_29_NLD12__FUNC_I2SIN_CK (MTK_PIN_NO(29) | 3)
+#define MT8135_PIN_29_NLD12__FUNC_DAC_CK (MTK_PIN_NO(29) | 4)
+#define MT8135_PIN_29_NLD12__FUNC_PCM1_CK (MTK_PIN_NO(29) | 5)
+
+#define MT8135_PIN_30_NLD13__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8135_PIN_30_NLD13__FUNC_NLD13 (MTK_PIN_NO(30) | 1)
+#define MT8135_PIN_30_NLD13__FUNC_EINT159 (MTK_PIN_NO(30) | 2)
+#define MT8135_PIN_30_NLD13__FUNC_I2SIN_WS (MTK_PIN_NO(30) | 3)
+#define MT8135_PIN_30_NLD13__FUNC_DAC_WS (MTK_PIN_NO(30) | 4)
+#define MT8135_PIN_30_NLD13__FUNC_PCM1_WS (MTK_PIN_NO(30) | 5)
+
+#define MT8135_PIN_31_NLD14__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8135_PIN_31_NLD14__FUNC_NLD14 (MTK_PIN_NO(31) | 1)
+#define MT8135_PIN_31_NLD14__FUNC_EINT160 (MTK_PIN_NO(31) | 2)
+#define MT8135_PIN_31_NLD14__FUNC_I2SOUT_DAT (MTK_PIN_NO(31) | 3)
+#define MT8135_PIN_31_NLD14__FUNC_DAC_DAT_OUT (MTK_PIN_NO(31) | 4)
+#define MT8135_PIN_31_NLD14__FUNC_PCM1_DO (MTK_PIN_NO(31) | 5)
+
+#define MT8135_PIN_32_NLD15__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8135_PIN_32_NLD15__FUNC_NLD15 (MTK_PIN_NO(32) | 1)
+#define MT8135_PIN_32_NLD15__FUNC_EINT161 (MTK_PIN_NO(32) | 2)
+#define MT8135_PIN_32_NLD15__FUNC_DISP_PWM (MTK_PIN_NO(32) | 3)
+#define MT8135_PIN_32_NLD15__FUNC_PWM4 (MTK_PIN_NO(32) | 4)
+#define MT8135_PIN_32_NLD15__FUNC_PCM1_DI (MTK_PIN_NO(32) | 5)
+
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(33) | 1)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_EINT50 (MTK_PIN_NO(33) | 2)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_I2SIN_DAT (MTK_PIN_NO(33) | 3)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_PCM1_DI (MTK_PIN_NO(33) | 5)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_SPI1_MI (MTK_PIN_NO(33) | 6)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_NLD10 (MTK_PIN_NO(33) | 7)
+
+#define MT8135_PIN_34_IDDIG__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8135_PIN_34_IDDIG__FUNC_IDDIG (MTK_PIN_NO(34) | 1)
+#define MT8135_PIN_34_IDDIG__FUNC_EINT34 (MTK_PIN_NO(34) | 2)
+
+#define MT8135_PIN_35_SCL3__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8135_PIN_35_SCL3__FUNC_SCL3 (MTK_PIN_NO(35) | 1)
+#define MT8135_PIN_35_SCL3__FUNC_EINT96 (MTK_PIN_NO(35) | 2)
+#define MT8135_PIN_35_SCL3__FUNC_CLKM6 (MTK_PIN_NO(35) | 3)
+#define MT8135_PIN_35_SCL3__FUNC_PWM6 (MTK_PIN_NO(35) | 4)
+
+#define MT8135_PIN_36_SDA3__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8135_PIN_36_SDA3__FUNC_SDA3 (MTK_PIN_NO(36) | 1)
+#define MT8135_PIN_36_SDA3__FUNC_EINT97 (MTK_PIN_NO(36) | 2)
+
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_AUD_CLK (MTK_PIN_NO(37) | 1)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_ADC_CK (MTK_PIN_NO(37) | 2)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_HDMI_SDATA0 (MTK_PIN_NO(37) | 3)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_EINT19 (MTK_PIN_NO(37) | 4)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_USB_TEST_IO_6 (MTK_PIN_NO(37) | 5)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_TESTA_OUT19 (MTK_PIN_NO(37) | 7)
+
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(38) | 1)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_ADC_WS (MTK_PIN_NO(38) | 2)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(38) | 3)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_EINT21 (MTK_PIN_NO(38) | 4)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_USB_TEST_IO_7 (MTK_PIN_NO(38) | 5)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_TESTA_OUT20 (MTK_PIN_NO(38) | 7)
+
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(39) | 1)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_ADC_DAT_IN (MTK_PIN_NO(39) | 2)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(39) | 3)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_EINT20 (MTK_PIN_NO(39) | 4)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_USB_TEST_IO_8 (MTK_PIN_NO(39) | 5)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_TESTA_OUT21 (MTK_PIN_NO(39) | 7)
+
+#define MT8135_PIN_40_DAC_CLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8135_PIN_40_DAC_CLK__FUNC_DAC_CK (MTK_PIN_NO(40) | 1)
+#define MT8135_PIN_40_DAC_CLK__FUNC_EINT22 (MTK_PIN_NO(40) | 2)
+#define MT8135_PIN_40_DAC_CLK__FUNC_HDMI_SDATA1 (MTK_PIN_NO(40) | 3)
+#define MT8135_PIN_40_DAC_CLK__FUNC_USB_TEST_IO_9 (MTK_PIN_NO(40) | 5)
+#define MT8135_PIN_40_DAC_CLK__FUNC_TESTA_OUT22 (MTK_PIN_NO(40) | 7)
+
+#define MT8135_PIN_41_DAC_WS__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8135_PIN_41_DAC_WS__FUNC_DAC_WS (MTK_PIN_NO(41) | 1)
+#define MT8135_PIN_41_DAC_WS__FUNC_EINT24 (MTK_PIN_NO(41) | 2)
+#define MT8135_PIN_41_DAC_WS__FUNC_HDMI_SDATA2 (MTK_PIN_NO(41) | 3)
+#define MT8135_PIN_41_DAC_WS__FUNC_USB_TEST_IO_10 (MTK_PIN_NO(41) | 5)
+#define MT8135_PIN_41_DAC_WS__FUNC_TESTA_OUT23 (MTK_PIN_NO(41) | 7)
+
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(42) | 1)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_EINT23 (MTK_PIN_NO(42) | 2)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_HDMI_SDATA3 (MTK_PIN_NO(42) | 3)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_USB_TEST_IO_11 (MTK_PIN_NO(42) | 5)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_TESTA_OUT24 (MTK_PIN_NO(42) | 7)
+
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(43) | 1)
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_EINT29 (MTK_PIN_NO(43) | 2)
+
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(44) | 1)
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_EINT28 (MTK_PIN_NO(44) | 2)
+
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(45) | 1)
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_EINT27 (MTK_PIN_NO(45) | 2)
+
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(46) | 1)
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_EINT26 (MTK_PIN_NO(46) | 2)
+
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_PWRAP_EVENT_IN (MTK_PIN_NO(47) | 1)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_EINT25 (MTK_PIN_NO(47) | 2)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_TESTA_OUT2 (MTK_PIN_NO(47) | 7)
+
+#define MT8135_PIN_48_RTC32K_CK__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8135_PIN_48_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(48) | 1)
+
+#define MT8135_PIN_49_WATCHDOG__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8135_PIN_49_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(49) | 1)
+#define MT8135_PIN_49_WATCHDOG__FUNC_EINT36 (MTK_PIN_NO(49) | 2)
+
+#define MT8135_PIN_50_SRCLKENA__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8135_PIN_50_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(50) | 1)
+#define MT8135_PIN_50_SRCLKENA__FUNC_EINT38 (MTK_PIN_NO(50) | 2)
+
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_SRCVOLTEN (MTK_PIN_NO(51) | 1)
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_EINT37 (MTK_PIN_NO(51) | 2)
+
+#define MT8135_PIN_52_EINT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8135_PIN_52_EINT0__FUNC_EINT0 (MTK_PIN_NO(52) | 1)
+#define MT8135_PIN_52_EINT0__FUNC_PWM1 (MTK_PIN_NO(52) | 2)
+#define MT8135_PIN_52_EINT0__FUNC_CLKM0 (MTK_PIN_NO(52) | 3)
+#define MT8135_PIN_52_EINT0__FUNC_SPDIF_OUT (MTK_PIN_NO(52) | 4)
+#define MT8135_PIN_52_EINT0__FUNC_USB_TEST_IO_12 (MTK_PIN_NO(52) | 5)
+#define MT8135_PIN_52_EINT0__FUNC_USB_SCL (MTK_PIN_NO(52) | 7)
+
+#define MT8135_PIN_53_URXD2__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8135_PIN_53_URXD2__FUNC_URXD2 (MTK_PIN_NO(53) | 1)
+#define MT8135_PIN_53_URXD2__FUNC_EINT83 (MTK_PIN_NO(53) | 2)
+#define MT8135_PIN_53_URXD2__FUNC_HDMI_LRCK (MTK_PIN_NO(53) | 4)
+#define MT8135_PIN_53_URXD2__FUNC_CLKM3 (MTK_PIN_NO(53) | 5)
+#define MT8135_PIN_53_URXD2__FUNC_UTXD2 (MTK_PIN_NO(53) | 7)
+
+#define MT8135_PIN_54_UTXD2__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8135_PIN_54_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(54) | 1)
+#define MT8135_PIN_54_UTXD2__FUNC_EINT82 (MTK_PIN_NO(54) | 2)
+#define MT8135_PIN_54_UTXD2__FUNC_HDMI_BCK_OUT (MTK_PIN_NO(54) | 4)
+#define MT8135_PIN_54_UTXD2__FUNC_CLKM2 (MTK_PIN_NO(54) | 5)
+#define MT8135_PIN_54_UTXD2__FUNC_URXD2 (MTK_PIN_NO(54) | 7)
+
+#define MT8135_PIN_55_UCTS2__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8135_PIN_55_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(55) | 1)
+#define MT8135_PIN_55_UCTS2__FUNC_EINT84 (MTK_PIN_NO(55) | 2)
+#define MT8135_PIN_55_UCTS2__FUNC_PWM1 (MTK_PIN_NO(55) | 5)
+#define MT8135_PIN_55_UCTS2__FUNC_URTS2 (MTK_PIN_NO(55) | 7)
+
+#define MT8135_PIN_56_URTS2__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8135_PIN_56_URTS2__FUNC_URTS2 (MTK_PIN_NO(56) | 1)
+#define MT8135_PIN_56_URTS2__FUNC_EINT85 (MTK_PIN_NO(56) | 2)
+#define MT8135_PIN_56_URTS2__FUNC_PWM2 (MTK_PIN_NO(56) | 5)
+#define MT8135_PIN_56_URTS2__FUNC_UCTS2 (MTK_PIN_NO(56) | 7)
+
+#define MT8135_PIN_57_JTCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8135_PIN_57_JTCK__FUNC_JTCK (MTK_PIN_NO(57) | 1)
+#define MT8135_PIN_57_JTCK__FUNC_EINT188 (MTK_PIN_NO(57) | 2)
+#define MT8135_PIN_57_JTCK__FUNC_DSP1_ICK (MTK_PIN_NO(57) | 3)
+
+#define MT8135_PIN_58_JTDO__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8135_PIN_58_JTDO__FUNC_JTDO (MTK_PIN_NO(58) | 1)
+#define MT8135_PIN_58_JTDO__FUNC_EINT190 (MTK_PIN_NO(58) | 2)
+#define MT8135_PIN_58_JTDO__FUNC_DSP2_IMS (MTK_PIN_NO(58) | 3)
+
+#define MT8135_PIN_59_JTRST_B__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8135_PIN_59_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(59) | 1)
+#define MT8135_PIN_59_JTRST_B__FUNC_EINT0 (MTK_PIN_NO(59) | 2)
+#define MT8135_PIN_59_JTRST_B__FUNC_DSP2_ICK (MTK_PIN_NO(59) | 3)
+
+#define MT8135_PIN_60_JTDI__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8135_PIN_60_JTDI__FUNC_JTDI (MTK_PIN_NO(60) | 1)
+#define MT8135_PIN_60_JTDI__FUNC_EINT189 (MTK_PIN_NO(60) | 2)
+#define MT8135_PIN_60_JTDI__FUNC_DSP1_IMS (MTK_PIN_NO(60) | 3)
+
+#define MT8135_PIN_61_JRTCK__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8135_PIN_61_JRTCK__FUNC_JRTCK (MTK_PIN_NO(61) | 1)
+#define MT8135_PIN_61_JRTCK__FUNC_EINT187 (MTK_PIN_NO(61) | 2)
+#define MT8135_PIN_61_JRTCK__FUNC_DSP1_ID (MTK_PIN_NO(61) | 3)
+
+#define MT8135_PIN_62_JTMS__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8135_PIN_62_JTMS__FUNC_JTMS (MTK_PIN_NO(62) | 1)
+#define MT8135_PIN_62_JTMS__FUNC_EINT191 (MTK_PIN_NO(62) | 2)
+#define MT8135_PIN_62_JTMS__FUNC_DSP2_ID (MTK_PIN_NO(62) | 3)
+
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_MSDC1_INSI (MTK_PIN_NO(63) | 1)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_SCL5 (MTK_PIN_NO(63) | 3)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_PWM6 (MTK_PIN_NO(63) | 4)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_CLKM5 (MTK_PIN_NO(63) | 5)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_TESTB_OUT6 (MTK_PIN_NO(63) | 7)
+
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_MSDC1_SDWPI (MTK_PIN_NO(64) | 1)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_EINT58 (MTK_PIN_NO(64) | 2)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_SDA5 (MTK_PIN_NO(64) | 3)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_PWM7 (MTK_PIN_NO(64) | 4)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_CLKM6 (MTK_PIN_NO(64) | 5)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_TESTB_OUT7 (MTK_PIN_NO(64) | 7)
+
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_MSDC2_INSI (MTK_PIN_NO(65) | 1)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_USB_TEST_IO_27 (MTK_PIN_NO(65) | 5)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_TESTA_OUT3 (MTK_PIN_NO(65) | 7)
+
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_MSDC2_SDWPI (MTK_PIN_NO(66) | 1)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_EINT66 (MTK_PIN_NO(66) | 2)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_USB_TEST_IO_28 (MTK_PIN_NO(66) | 5)
+
+#define MT8135_PIN_67_URXD4__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define MT8135_PIN_67_URXD4__FUNC_URXD4 (MTK_PIN_NO(67) | 1)
+#define MT8135_PIN_67_URXD4__FUNC_EINT89 (MTK_PIN_NO(67) | 2)
+#define MT8135_PIN_67_URXD4__FUNC_URXD1 (MTK_PIN_NO(67) | 3)
+#define MT8135_PIN_67_URXD4__FUNC_UTXD4 (MTK_PIN_NO(67) | 6)
+#define MT8135_PIN_67_URXD4__FUNC_TESTB_OUT10 (MTK_PIN_NO(67) | 7)
+
+#define MT8135_PIN_68_UTXD4__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8135_PIN_68_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(68) | 1)
+#define MT8135_PIN_68_UTXD4__FUNC_EINT88 (MTK_PIN_NO(68) | 2)
+#define MT8135_PIN_68_UTXD4__FUNC_UTXD1 (MTK_PIN_NO(68) | 3)
+#define MT8135_PIN_68_UTXD4__FUNC_URXD4 (MTK_PIN_NO(68) | 6)
+#define MT8135_PIN_68_UTXD4__FUNC_TESTB_OUT11 (MTK_PIN_NO(68) | 7)
+
+#define MT8135_PIN_69_URXD1__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8135_PIN_69_URXD1__FUNC_URXD1 (MTK_PIN_NO(69) | 1)
+#define MT8135_PIN_69_URXD1__FUNC_EINT79 (MTK_PIN_NO(69) | 2)
+#define MT8135_PIN_69_URXD1__FUNC_URXD4 (MTK_PIN_NO(69) | 3)
+#define MT8135_PIN_69_URXD1__FUNC_UTXD1 (MTK_PIN_NO(69) | 6)
+#define MT8135_PIN_69_URXD1__FUNC_TESTB_OUT24 (MTK_PIN_NO(69) | 7)
+
+#define MT8135_PIN_70_UTXD1__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8135_PIN_70_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(70) | 1)
+#define MT8135_PIN_70_UTXD1__FUNC_EINT78 (MTK_PIN_NO(70) | 2)
+#define MT8135_PIN_70_UTXD1__FUNC_UTXD4 (MTK_PIN_NO(70) | 3)
+#define MT8135_PIN_70_UTXD1__FUNC_URXD1 (MTK_PIN_NO(70) | 6)
+#define MT8135_PIN_70_UTXD1__FUNC_TESTB_OUT25 (MTK_PIN_NO(70) | 7)
+
+#define MT8135_PIN_71_UCTS1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8135_PIN_71_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(71) | 1)
+#define MT8135_PIN_71_UCTS1__FUNC_EINT80 (MTK_PIN_NO(71) | 2)
+#define MT8135_PIN_71_UCTS1__FUNC_CLKM0 (MTK_PIN_NO(71) | 5)
+#define MT8135_PIN_71_UCTS1__FUNC_URTS1 (MTK_PIN_NO(71) | 6)
+#define MT8135_PIN_71_UCTS1__FUNC_TESTB_OUT31 (MTK_PIN_NO(71) | 7)
+
+#define MT8135_PIN_72_URTS1__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8135_PIN_72_URTS1__FUNC_URTS1 (MTK_PIN_NO(72) | 1)
+#define MT8135_PIN_72_URTS1__FUNC_EINT81 (MTK_PIN_NO(72) | 2)
+#define MT8135_PIN_72_URTS1__FUNC_CLKM1 (MTK_PIN_NO(72) | 5)
+#define MT8135_PIN_72_URTS1__FUNC_UCTS1 (MTK_PIN_NO(72) | 6)
+#define MT8135_PIN_72_URTS1__FUNC_TESTB_OUT21 (MTK_PIN_NO(72) | 7)
+
+#define MT8135_PIN_73_PWM1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8135_PIN_73_PWM1__FUNC_PWM1 (MTK_PIN_NO(73) | 1)
+#define MT8135_PIN_73_PWM1__FUNC_EINT73 (MTK_PIN_NO(73) | 2)
+#define MT8135_PIN_73_PWM1__FUNC_USB_DRVVBUS (MTK_PIN_NO(73) | 5)
+#define MT8135_PIN_73_PWM1__FUNC_DISP_PWM (MTK_PIN_NO(73) | 6)
+#define MT8135_PIN_73_PWM1__FUNC_TESTB_OUT8 (MTK_PIN_NO(73) | 7)
+
+#define MT8135_PIN_74_PWM2__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT8135_PIN_74_PWM2__FUNC_PWM2 (MTK_PIN_NO(74) | 1)
+#define MT8135_PIN_74_PWM2__FUNC_EINT74 (MTK_PIN_NO(74) | 2)
+#define MT8135_PIN_74_PWM2__FUNC_DPI33_CK (MTK_PIN_NO(74) | 3)
+#define MT8135_PIN_74_PWM2__FUNC_PWM5 (MTK_PIN_NO(74) | 4)
+#define MT8135_PIN_74_PWM2__FUNC_URXD2 (MTK_PIN_NO(74) | 5)
+#define MT8135_PIN_74_PWM2__FUNC_DISP_PWM (MTK_PIN_NO(74) | 6)
+#define MT8135_PIN_74_PWM2__FUNC_TESTB_OUT9 (MTK_PIN_NO(74) | 7)
+
+#define MT8135_PIN_75_PWM3__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT8135_PIN_75_PWM3__FUNC_PWM3 (MTK_PIN_NO(75) | 1)
+#define MT8135_PIN_75_PWM3__FUNC_EINT75 (MTK_PIN_NO(75) | 2)
+#define MT8135_PIN_75_PWM3__FUNC_DPI33_D0 (MTK_PIN_NO(75) | 3)
+#define MT8135_PIN_75_PWM3__FUNC_PWM6 (MTK_PIN_NO(75) | 4)
+#define MT8135_PIN_75_PWM3__FUNC_UTXD2 (MTK_PIN_NO(75) | 5)
+#define MT8135_PIN_75_PWM3__FUNC_DISP_PWM (MTK_PIN_NO(75) | 6)
+#define MT8135_PIN_75_PWM3__FUNC_TESTB_OUT12 (MTK_PIN_NO(75) | 7)
+
+#define MT8135_PIN_76_PWM4__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT8135_PIN_76_PWM4__FUNC_PWM4 (MTK_PIN_NO(76) | 1)
+#define MT8135_PIN_76_PWM4__FUNC_EINT76 (MTK_PIN_NO(76) | 2)
+#define MT8135_PIN_76_PWM4__FUNC_DPI33_D1 (MTK_PIN_NO(76) | 3)
+#define MT8135_PIN_76_PWM4__FUNC_PWM7 (MTK_PIN_NO(76) | 4)
+#define MT8135_PIN_76_PWM4__FUNC_DISP_PWM (MTK_PIN_NO(76) | 6)
+#define MT8135_PIN_76_PWM4__FUNC_TESTB_OUT13 (MTK_PIN_NO(76) | 7)
+
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(77) | 1)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_EINT63 (MTK_PIN_NO(77) | 2)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DSP2_IMS (MTK_PIN_NO(77) | 4)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DPI33_D6 (MTK_PIN_NO(77) | 6)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_TESTA_OUT25 (MTK_PIN_NO(77) | 7)
+
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(78) | 1)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_EINT64 (MTK_PIN_NO(78) | 2)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DSP2_ID (MTK_PIN_NO(78) | 4)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DPI33_D7 (MTK_PIN_NO(78) | 6)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_TESTA_OUT26 (MTK_PIN_NO(78) | 7)
+
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(79) | 1)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_EINT60 (MTK_PIN_NO(79) | 2)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_DSP1_IMS (MTK_PIN_NO(79) | 4)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_PCM1_WS (MTK_PIN_NO(79) | 5)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_DPI33_D3 (MTK_PIN_NO(79) | 6)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_TESTA_OUT0 (MTK_PIN_NO(79) | 7)
+
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(80) | 1)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_EINT59 (MTK_PIN_NO(80) | 2)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_DSP1_ICK (MTK_PIN_NO(80) | 4)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_PCM1_CK (MTK_PIN_NO(80) | 5)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_DPI33_D2 (MTK_PIN_NO(80) | 6)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_TESTA_OUT1 (MTK_PIN_NO(80) | 7)
+
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(81) | 1)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_EINT62 (MTK_PIN_NO(81) | 2)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DSP2_ICK (MTK_PIN_NO(81) | 4)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_PCM1_DO (MTK_PIN_NO(81) | 5)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DPI33_D5 (MTK_PIN_NO(81) | 6)
+
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(82) | 1)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_EINT61 (MTK_PIN_NO(82) | 2)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DSP1_ID (MTK_PIN_NO(82) | 4)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_PCM1_DI (MTK_PIN_NO(82) | 5)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DPI33_D4 (MTK_PIN_NO(82) | 6)
+
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(83) | 1)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_EINT53 (MTK_PIN_NO(83) | 2)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_SCL1 (MTK_PIN_NO(83) | 3)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_PWM2 (MTK_PIN_NO(83) | 4)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_CLKM1 (MTK_PIN_NO(83) | 5)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_TESTB_OUT2 (MTK_PIN_NO(83) | 7)
+
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(84) | 1)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_EINT54 (MTK_PIN_NO(84) | 2)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_SDA1 (MTK_PIN_NO(84) | 3)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_PWM3 (MTK_PIN_NO(84) | 4)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_CLKM2 (MTK_PIN_NO(84) | 5)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_TESTB_OUT3 (MTK_PIN_NO(84) | 7)
+
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(85) | 1)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_EINT52 (MTK_PIN_NO(85) | 2)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_SDA0 (MTK_PIN_NO(85) | 3)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_PWM1 (MTK_PIN_NO(85) | 4)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_CLKM0 (MTK_PIN_NO(85) | 5)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_TESTB_OUT1 (MTK_PIN_NO(85) | 7)
+
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(86) | 1)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_EINT51 (MTK_PIN_NO(86) | 2)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_SCL0 (MTK_PIN_NO(86) | 3)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_DISP_PWM (MTK_PIN_NO(86) | 4)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_TESTB_OUT0 (MTK_PIN_NO(86) | 7)
+
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(87) | 1)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_EINT55 (MTK_PIN_NO(87) | 2)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_SCL4 (MTK_PIN_NO(87) | 3)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_PWM4 (MTK_PIN_NO(87) | 4)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_CLKM3 (MTK_PIN_NO(87) | 5)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_TESTB_OUT4 (MTK_PIN_NO(87) | 7)
+
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(88) | 1)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_EINT56 (MTK_PIN_NO(88) | 2)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_SDA4 (MTK_PIN_NO(88) | 3)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_PWM5 (MTK_PIN_NO(88) | 4)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_CLKM4 (MTK_PIN_NO(88) | 5)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_TESTB_OUT5 (MTK_PIN_NO(88) | 7)
+
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_MSDC4_DAT0 (MTK_PIN_NO(89) | 1)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EINT133 (MTK_PIN_NO(89) | 2)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(89) | 4)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_USB_DRVVBUS (MTK_PIN_NO(89) | 5)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_A_FUNC_DIN_9 (MTK_PIN_NO(89) | 6)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_LPTE (MTK_PIN_NO(89) | 7)
+
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_MSDC4_DAT1 (MTK_PIN_NO(90) | 1)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_EINT134 (MTK_PIN_NO(90) | 2)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_A_FUNC_DIN_10 (MTK_PIN_NO(90) | 6)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_LRSTB_1X (MTK_PIN_NO(90) | 7)
+
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_MSDC4_DAT5 (MTK_PIN_NO(91) | 1)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_EINT136 (MTK_PIN_NO(91) | 2)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_I2SIN_WS (MTK_PIN_NO(91) | 3)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_DAC_WS (MTK_PIN_NO(91) | 4)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_PCM1_WS (MTK_PIN_NO(91) | 5)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_A_FUNC_DIN_11 (MTK_PIN_NO(91) | 6)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_SPI1_CSN (MTK_PIN_NO(91) | 7)
+
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_MSDC4_DAT6 (MTK_PIN_NO(92) | 1)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_EINT137 (MTK_PIN_NO(92) | 2)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_I2SOUT_DAT (MTK_PIN_NO(92) | 3)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_DAC_DAT_OUT (MTK_PIN_NO(92) | 4)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_PCM1_DO (MTK_PIN_NO(92) | 5)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_A_FUNC_DIN_12 (MTK_PIN_NO(92) | 6)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_SPI1_MO (MTK_PIN_NO(92) | 7)
+
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_MSDC4_DAT7 (MTK_PIN_NO(93) | 1)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_EINT138 (MTK_PIN_NO(93) | 2)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_I2SIN_DAT (MTK_PIN_NO(93) | 3)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_PCM1_DI (MTK_PIN_NO(93) | 5)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_A_FUNC_DIN_13 (MTK_PIN_NO(93) | 6)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_SPI1_MI (MTK_PIN_NO(93) | 7)
+
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_MSDC4_DAT4 (MTK_PIN_NO(94) | 1)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_EINT135 (MTK_PIN_NO(94) | 2)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_I2SIN_CK (MTK_PIN_NO(94) | 3)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_DAC_CK (MTK_PIN_NO(94) | 4)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_PCM1_CK (MTK_PIN_NO(94) | 5)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_A_FUNC_DIN_14 (MTK_PIN_NO(94) | 6)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_SPI1_CLK (MTK_PIN_NO(94) | 7)
+
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_MSDC4_DAT2 (MTK_PIN_NO(95) | 1)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_EINT131 (MTK_PIN_NO(95) | 2)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_I2SIN_WS (MTK_PIN_NO(95) | 3)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_CM2PDN_2X (MTK_PIN_NO(95) | 4)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_DAC_WS (MTK_PIN_NO(95) | 5)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_PCM1_WS (MTK_PIN_NO(95) | 6)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_LSCE0B_1X (MTK_PIN_NO(95) | 7)
+
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_MSDC4_CLK (MTK_PIN_NO(96) | 1)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_EINT129 (MTK_PIN_NO(96) | 2)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_DPI1_CK_2X (MTK_PIN_NO(96) | 3)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_CM2PCLK_2X (MTK_PIN_NO(96) | 4)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_PWM4 (MTK_PIN_NO(96) | 5)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_PCM1_DI (MTK_PIN_NO(96) | 6)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_LSCK_1X (MTK_PIN_NO(96) | 7)
+
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_MSDC4_DAT3 (MTK_PIN_NO(97) | 1)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_EINT132 (MTK_PIN_NO(97) | 2)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_I2SOUT_DAT (MTK_PIN_NO(97) | 3)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_CM2RST_2X (MTK_PIN_NO(97) | 4)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_DAC_DAT_OUT (MTK_PIN_NO(97) | 5)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_PCM1_DO (MTK_PIN_NO(97) | 6)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_LSCE1B_1X (MTK_PIN_NO(97) | 7)
+
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_MSDC4_CMD (MTK_PIN_NO(98) | 1)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_EINT128 (MTK_PIN_NO(98) | 2)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_DPI1_DE_2X (MTK_PIN_NO(98) | 3)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_PWM3 (MTK_PIN_NO(98) | 5)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_LSDA_1X (MTK_PIN_NO(98) | 7)
+
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_MSDC4_RSTB (MTK_PIN_NO(99) | 1)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_EINT130 (MTK_PIN_NO(99) | 2)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_I2SIN_CK (MTK_PIN_NO(99) | 3)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_CM2MCLK_2X (MTK_PIN_NO(99) | 4)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_DAC_CK (MTK_PIN_NO(99) | 5)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_PCM1_CK (MTK_PIN_NO(99) | 6)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_LSA0_1X (MTK_PIN_NO(99) | 7)
+
+#define MT8135_PIN_100_SDA0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8135_PIN_100_SDA0__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+#define MT8135_PIN_100_SDA0__FUNC_EINT91 (MTK_PIN_NO(100) | 2)
+#define MT8135_PIN_100_SDA0__FUNC_CLKM1 (MTK_PIN_NO(100) | 3)
+#define MT8135_PIN_100_SDA0__FUNC_PWM1 (MTK_PIN_NO(100) | 4)
+#define MT8135_PIN_100_SDA0__FUNC_A_FUNC_DIN_15 (MTK_PIN_NO(100) | 7)
+
+#define MT8135_PIN_101_SCL0__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8135_PIN_101_SCL0__FUNC_SCL0 (MTK_PIN_NO(101) | 1)
+#define MT8135_PIN_101_SCL0__FUNC_EINT90 (MTK_PIN_NO(101) | 2)
+#define MT8135_PIN_101_SCL0__FUNC_CLKM0 (MTK_PIN_NO(101) | 3)
+#define MT8135_PIN_101_SCL0__FUNC_DISP_PWM (MTK_PIN_NO(101) | 4)
+#define MT8135_PIN_101_SCL0__FUNC_A_FUNC_DIN_16 (MTK_PIN_NO(101) | 7)
+
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_EINT10 (MTK_PIN_NO(102) | 1)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_USB_TEST_IO_16 (MTK_PIN_NO(102) | 5)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_TESTB_OUT16 (MTK_PIN_NO(102) | 6)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_A_FUNC_DIN_17 (MTK_PIN_NO(102) | 7)
+
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_EINT11 (MTK_PIN_NO(103) | 1)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_USB_TEST_IO_17 (MTK_PIN_NO(103) | 5)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_TESTB_OUT17 (MTK_PIN_NO(103) | 6)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_A_FUNC_DIN_18 (MTK_PIN_NO(103) | 7)
+
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_EINT16 (MTK_PIN_NO(104) | 1)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_USB_TEST_IO_18 (MTK_PIN_NO(104) | 5)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_TESTB_OUT18 (MTK_PIN_NO(104) | 6)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_A_FUNC_DIN_19 (MTK_PIN_NO(104) | 7)
+
+#define MT8135_PIN_105_I2S_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8135_PIN_105_I2S_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(105) | 1)
+#define MT8135_PIN_105_I2S_CLK__FUNC_EINT10 (MTK_PIN_NO(105) | 2)
+#define MT8135_PIN_105_I2S_CLK__FUNC_DAC_CK (MTK_PIN_NO(105) | 3)
+#define MT8135_PIN_105_I2S_CLK__FUNC_PCM1_CK (MTK_PIN_NO(105) | 4)
+#define MT8135_PIN_105_I2S_CLK__FUNC_USB_TEST_IO_19 (MTK_PIN_NO(105) | 5)
+#define MT8135_PIN_105_I2S_CLK__FUNC_TESTB_OUT19 (MTK_PIN_NO(105) | 6)
+#define MT8135_PIN_105_I2S_CLK__FUNC_A_FUNC_DIN_20 (MTK_PIN_NO(105) | 7)
+
+#define MT8135_PIN_106_I2S_WS__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8135_PIN_106_I2S_WS__FUNC_I2SIN_WS (MTK_PIN_NO(106) | 1)
+#define MT8135_PIN_106_I2S_WS__FUNC_EINT13 (MTK_PIN_NO(106) | 2)
+#define MT8135_PIN_106_I2S_WS__FUNC_DAC_WS (MTK_PIN_NO(106) | 3)
+#define MT8135_PIN_106_I2S_WS__FUNC_PCM1_WS (MTK_PIN_NO(106) | 4)
+#define MT8135_PIN_106_I2S_WS__FUNC_USB_TEST_IO_20 (MTK_PIN_NO(106) | 5)
+#define MT8135_PIN_106_I2S_WS__FUNC_TESTB_OUT20 (MTK_PIN_NO(106) | 6)
+#define MT8135_PIN_106_I2S_WS__FUNC_A_FUNC_DIN_21 (MTK_PIN_NO(106) | 7)
+
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_I2SIN_DAT (MTK_PIN_NO(107) | 1)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_EINT11 (MTK_PIN_NO(107) | 2)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_PCM1_DI (MTK_PIN_NO(107) | 4)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_USB_TEST_IO_21 (MTK_PIN_NO(107) | 5)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_TESTB_OUT22 (MTK_PIN_NO(107) | 6)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_A_FUNC_DIN_22 (MTK_PIN_NO(107) | 7)
+
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_I2SOUT_DAT (MTK_PIN_NO(108) | 1)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_EINT12 (MTK_PIN_NO(108) | 2)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(108) | 3)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_PCM1_DO (MTK_PIN_NO(108) | 4)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_USB_TEST_IO_22 (MTK_PIN_NO(108) | 5)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_TESTB_OUT23 (MTK_PIN_NO(108) | 6)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_A_FUNC_DIN_23 (MTK_PIN_NO(108) | 7)
+
+#define MT8135_PIN_109_EINT5__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8135_PIN_109_EINT5__FUNC_EINT5 (MTK_PIN_NO(109) | 1)
+#define MT8135_PIN_109_EINT5__FUNC_PWM5 (MTK_PIN_NO(109) | 2)
+#define MT8135_PIN_109_EINT5__FUNC_CLKM3 (MTK_PIN_NO(109) | 3)
+#define MT8135_PIN_109_EINT5__FUNC_GPU_JTRSTB (MTK_PIN_NO(109) | 4)
+#define MT8135_PIN_109_EINT5__FUNC_USB_TEST_IO_23 (MTK_PIN_NO(109) | 5)
+#define MT8135_PIN_109_EINT5__FUNC_TESTB_OUT26 (MTK_PIN_NO(109) | 6)
+#define MT8135_PIN_109_EINT5__FUNC_A_FUNC_DIN_24 (MTK_PIN_NO(109) | 7)
+
+#define MT8135_PIN_110_EINT6__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8135_PIN_110_EINT6__FUNC_EINT6 (MTK_PIN_NO(110) | 1)
+#define MT8135_PIN_110_EINT6__FUNC_PWM6 (MTK_PIN_NO(110) | 2)
+#define MT8135_PIN_110_EINT6__FUNC_CLKM4 (MTK_PIN_NO(110) | 3)
+#define MT8135_PIN_110_EINT6__FUNC_GPU_JTMS (MTK_PIN_NO(110) | 4)
+#define MT8135_PIN_110_EINT6__FUNC_USB_TEST_IO_24 (MTK_PIN_NO(110) | 5)
+#define MT8135_PIN_110_EINT6__FUNC_TESTB_OUT27 (MTK_PIN_NO(110) | 6)
+#define MT8135_PIN_110_EINT6__FUNC_A_FUNC_DIN_25 (MTK_PIN_NO(110) | 7)
+
+#define MT8135_PIN_111_EINT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8135_PIN_111_EINT7__FUNC_EINT7 (MTK_PIN_NO(111) | 1)
+#define MT8135_PIN_111_EINT7__FUNC_PWM7 (MTK_PIN_NO(111) | 2)
+#define MT8135_PIN_111_EINT7__FUNC_CLKM5 (MTK_PIN_NO(111) | 3)
+#define MT8135_PIN_111_EINT7__FUNC_GPU_JTDO (MTK_PIN_NO(111) | 4)
+#define MT8135_PIN_111_EINT7__FUNC_USB_TEST_IO_25 (MTK_PIN_NO(111) | 5)
+#define MT8135_PIN_111_EINT7__FUNC_TESTB_OUT28 (MTK_PIN_NO(111) | 6)
+#define MT8135_PIN_111_EINT7__FUNC_A_FUNC_DIN_26 (MTK_PIN_NO(111) | 7)
+
+#define MT8135_PIN_112_EINT8__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8135_PIN_112_EINT8__FUNC_EINT8 (MTK_PIN_NO(112) | 1)
+#define MT8135_PIN_112_EINT8__FUNC_DISP_PWM (MTK_PIN_NO(112) | 2)
+#define MT8135_PIN_112_EINT8__FUNC_CLKM6 (MTK_PIN_NO(112) | 3)
+#define MT8135_PIN_112_EINT8__FUNC_GPU_JTDI (MTK_PIN_NO(112) | 4)
+#define MT8135_PIN_112_EINT8__FUNC_USB_TEST_IO_26 (MTK_PIN_NO(112) | 5)
+#define MT8135_PIN_112_EINT8__FUNC_TESTB_OUT29 (MTK_PIN_NO(112) | 6)
+#define MT8135_PIN_112_EINT8__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(112) | 7)
+
+#define MT8135_PIN_113_EINT9__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8135_PIN_113_EINT9__FUNC_EINT9 (MTK_PIN_NO(113) | 1)
+#define MT8135_PIN_113_EINT9__FUNC_GPU_JTCK (MTK_PIN_NO(113) | 4)
+#define MT8135_PIN_113_EINT9__FUNC_USB_DRVVBUS (MTK_PIN_NO(113) | 5)
+#define MT8135_PIN_113_EINT9__FUNC_TESTB_OUT30 (MTK_PIN_NO(113) | 6)
+#define MT8135_PIN_113_EINT9__FUNC_A_FUNC_DIN_27 (MTK_PIN_NO(113) | 7)
+
+#define MT8135_PIN_114_LPCE1B__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8135_PIN_114_LPCE1B__FUNC_LPCE1B (MTK_PIN_NO(114) | 1)
+#define MT8135_PIN_114_LPCE1B__FUNC_EINT127 (MTK_PIN_NO(114) | 2)
+#define MT8135_PIN_114_LPCE1B__FUNC_PWM2 (MTK_PIN_NO(114) | 5)
+#define MT8135_PIN_114_LPCE1B__FUNC_TESTB_OUT14 (MTK_PIN_NO(114) | 6)
+#define MT8135_PIN_114_LPCE1B__FUNC_A_FUNC_DIN_28 (MTK_PIN_NO(114) | 7)
+
+#define MT8135_PIN_115_LPCE0B__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8135_PIN_115_LPCE0B__FUNC_LPCE0B (MTK_PIN_NO(115) | 1)
+#define MT8135_PIN_115_LPCE0B__FUNC_EINT126 (MTK_PIN_NO(115) | 2)
+#define MT8135_PIN_115_LPCE0B__FUNC_PWM1 (MTK_PIN_NO(115) | 5)
+#define MT8135_PIN_115_LPCE0B__FUNC_TESTB_OUT15 (MTK_PIN_NO(115) | 6)
+#define MT8135_PIN_115_LPCE0B__FUNC_A_FUNC_DIN_29 (MTK_PIN_NO(115) | 7)
+
+#define MT8135_PIN_116_DISP_PWM__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8135_PIN_116_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(116) | 1)
+#define MT8135_PIN_116_DISP_PWM__FUNC_EINT77 (MTK_PIN_NO(116) | 2)
+#define MT8135_PIN_116_DISP_PWM__FUNC_LSDI (MTK_PIN_NO(116) | 3)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM1 (MTK_PIN_NO(116) | 4)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM2 (MTK_PIN_NO(116) | 5)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM3 (MTK_PIN_NO(116) | 7)
+
+#define MT8135_PIN_117_EINT1__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8135_PIN_117_EINT1__FUNC_EINT1 (MTK_PIN_NO(117) | 1)
+#define MT8135_PIN_117_EINT1__FUNC_PWM2 (MTK_PIN_NO(117) | 2)
+#define MT8135_PIN_117_EINT1__FUNC_CLKM1 (MTK_PIN_NO(117) | 3)
+#define MT8135_PIN_117_EINT1__FUNC_USB_TEST_IO_13 (MTK_PIN_NO(117) | 5)
+#define MT8135_PIN_117_EINT1__FUNC_USB_SDA (MTK_PIN_NO(117) | 7)
+
+#define MT8135_PIN_118_EINT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8135_PIN_118_EINT2__FUNC_EINT2 (MTK_PIN_NO(118) | 1)
+#define MT8135_PIN_118_EINT2__FUNC_PWM3 (MTK_PIN_NO(118) | 2)
+#define MT8135_PIN_118_EINT2__FUNC_CLKM2 (MTK_PIN_NO(118) | 3)
+#define MT8135_PIN_118_EINT2__FUNC_USB_TEST_IO_14 (MTK_PIN_NO(118) | 5)
+#define MT8135_PIN_118_EINT2__FUNC_SRCLKENAI2 (MTK_PIN_NO(118) | 6)
+#define MT8135_PIN_118_EINT2__FUNC_A_FUNC_DIN_30 (MTK_PIN_NO(118) | 7)
+
+#define MT8135_PIN_119_EINT3__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8135_PIN_119_EINT3__FUNC_EINT3 (MTK_PIN_NO(119) | 1)
+#define MT8135_PIN_119_EINT3__FUNC_USB_TEST_IO_15 (MTK_PIN_NO(119) | 5)
+#define MT8135_PIN_119_EINT3__FUNC_SRCLKENAI1 (MTK_PIN_NO(119) | 6)
+#define MT8135_PIN_119_EINT3__FUNC_EXT_26M_CK (MTK_PIN_NO(119) | 7)
+
+#define MT8135_PIN_120_EINT4__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8135_PIN_120_EINT4__FUNC_EINT4 (MTK_PIN_NO(120) | 1)
+#define MT8135_PIN_120_EINT4__FUNC_PWM4 (MTK_PIN_NO(120) | 2)
+#define MT8135_PIN_120_EINT4__FUNC_USB_DRVVBUS (MTK_PIN_NO(120) | 5)
+#define MT8135_PIN_120_EINT4__FUNC_A_FUNC_DIN_31 (MTK_PIN_NO(120) | 7)
+
+#define MT8135_PIN_121_DPIDE__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT8135_PIN_121_DPIDE__FUNC_DPI0_DE (MTK_PIN_NO(121) | 1)
+#define MT8135_PIN_121_DPIDE__FUNC_EINT100 (MTK_PIN_NO(121) | 2)
+#define MT8135_PIN_121_DPIDE__FUNC_I2SOUT_DAT (MTK_PIN_NO(121) | 3)
+#define MT8135_PIN_121_DPIDE__FUNC_DAC_DAT_OUT (MTK_PIN_NO(121) | 4)
+#define MT8135_PIN_121_DPIDE__FUNC_PCM1_DO (MTK_PIN_NO(121) | 5)
+#define MT8135_PIN_121_DPIDE__FUNC_IRDA_TXD (MTK_PIN_NO(121) | 6)
+
+#define MT8135_PIN_122_DPICK__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT8135_PIN_122_DPICK__FUNC_DPI0_CK (MTK_PIN_NO(122) | 1)
+#define MT8135_PIN_122_DPICK__FUNC_EINT101 (MTK_PIN_NO(122) | 2)
+#define MT8135_PIN_122_DPICK__FUNC_I2SIN_DAT (MTK_PIN_NO(122) | 3)
+#define MT8135_PIN_122_DPICK__FUNC_PCM1_DI (MTK_PIN_NO(122) | 5)
+#define MT8135_PIN_122_DPICK__FUNC_IRDA_PDN (MTK_PIN_NO(122) | 6)
+
+#define MT8135_PIN_123_DPIG4__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT8135_PIN_123_DPIG4__FUNC_DPI0_G4 (MTK_PIN_NO(123) | 1)
+#define MT8135_PIN_123_DPIG4__FUNC_EINT114 (MTK_PIN_NO(123) | 2)
+#define MT8135_PIN_123_DPIG4__FUNC_CM2DAT_2X_0 (MTK_PIN_NO(123) | 4)
+#define MT8135_PIN_123_DPIG4__FUNC_DSP2_ID (MTK_PIN_NO(123) | 5)
+
+#define MT8135_PIN_124_DPIG5__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT8135_PIN_124_DPIG5__FUNC_DPI0_G5 (MTK_PIN_NO(124) | 1)
+#define MT8135_PIN_124_DPIG5__FUNC_EINT115 (MTK_PIN_NO(124) | 2)
+#define MT8135_PIN_124_DPIG5__FUNC_CM2DAT_2X_1 (MTK_PIN_NO(124) | 4)
+#define MT8135_PIN_124_DPIG5__FUNC_DSP2_ICK (MTK_PIN_NO(124) | 5)
+
+#define MT8135_PIN_125_DPIR3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT8135_PIN_125_DPIR3__FUNC_DPI0_R3 (MTK_PIN_NO(125) | 1)
+#define MT8135_PIN_125_DPIR3__FUNC_EINT121 (MTK_PIN_NO(125) | 2)
+#define MT8135_PIN_125_DPIR3__FUNC_CM2DAT_2X_7 (MTK_PIN_NO(125) | 4)
+
+#define MT8135_PIN_126_DPIG1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT8135_PIN_126_DPIG1__FUNC_DPI0_G1 (MTK_PIN_NO(126) | 1)
+#define MT8135_PIN_126_DPIG1__FUNC_EINT111 (MTK_PIN_NO(126) | 2)
+#define MT8135_PIN_126_DPIG1__FUNC_DSP1_ICK (MTK_PIN_NO(126) | 5)
+
+#define MT8135_PIN_127_DPIVSYNC__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_DPI0_VSYNC (MTK_PIN_NO(127) | 1)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_EINT98 (MTK_PIN_NO(127) | 2)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_I2SIN_CK (MTK_PIN_NO(127) | 3)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_DAC_CK (MTK_PIN_NO(127) | 4)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_PCM1_CK (MTK_PIN_NO(127) | 5)
+
+#define MT8135_PIN_128_DPIHSYNC__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_DPI0_HSYNC (MTK_PIN_NO(128) | 1)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_EINT99 (MTK_PIN_NO(128) | 2)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_I2SIN_WS (MTK_PIN_NO(128) | 3)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_DAC_WS (MTK_PIN_NO(128) | 4)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_PCM1_WS (MTK_PIN_NO(128) | 5)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_IRDA_RXD (MTK_PIN_NO(128) | 6)
+
+#define MT8135_PIN_129_DPIB0__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define MT8135_PIN_129_DPIB0__FUNC_DPI0_B0 (MTK_PIN_NO(129) | 1)
+#define MT8135_PIN_129_DPIB0__FUNC_EINT102 (MTK_PIN_NO(129) | 2)
+#define MT8135_PIN_129_DPIB0__FUNC_SCL0 (MTK_PIN_NO(129) | 4)
+#define MT8135_PIN_129_DPIB0__FUNC_DISP_PWM (MTK_PIN_NO(129) | 5)
+
+#define MT8135_PIN_130_DPIB1__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define MT8135_PIN_130_DPIB1__FUNC_DPI0_B1 (MTK_PIN_NO(130) | 1)
+#define MT8135_PIN_130_DPIB1__FUNC_EINT103 (MTK_PIN_NO(130) | 2)
+#define MT8135_PIN_130_DPIB1__FUNC_CLKM0 (MTK_PIN_NO(130) | 3)
+#define MT8135_PIN_130_DPIB1__FUNC_SDA0 (MTK_PIN_NO(130) | 4)
+#define MT8135_PIN_130_DPIB1__FUNC_PWM1 (MTK_PIN_NO(130) | 5)
+
+#define MT8135_PIN_131_DPIB2__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define MT8135_PIN_131_DPIB2__FUNC_DPI0_B2 (MTK_PIN_NO(131) | 1)
+#define MT8135_PIN_131_DPIB2__FUNC_EINT104 (MTK_PIN_NO(131) | 2)
+#define MT8135_PIN_131_DPIB2__FUNC_CLKM1 (MTK_PIN_NO(131) | 3)
+#define MT8135_PIN_131_DPIB2__FUNC_SCL1 (MTK_PIN_NO(131) | 4)
+#define MT8135_PIN_131_DPIB2__FUNC_PWM2 (MTK_PIN_NO(131) | 5)
+
+#define MT8135_PIN_132_DPIB3__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define MT8135_PIN_132_DPIB3__FUNC_DPI0_B3 (MTK_PIN_NO(132) | 1)
+#define MT8135_PIN_132_DPIB3__FUNC_EINT105 (MTK_PIN_NO(132) | 2)
+#define MT8135_PIN_132_DPIB3__FUNC_CLKM2 (MTK_PIN_NO(132) | 3)
+#define MT8135_PIN_132_DPIB3__FUNC_SDA1 (MTK_PIN_NO(132) | 4)
+#define MT8135_PIN_132_DPIB3__FUNC_PWM3 (MTK_PIN_NO(132) | 5)
+
+#define MT8135_PIN_133_DPIB4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define MT8135_PIN_133_DPIB4__FUNC_DPI0_B4 (MTK_PIN_NO(133) | 1)
+#define MT8135_PIN_133_DPIB4__FUNC_EINT106 (MTK_PIN_NO(133) | 2)
+#define MT8135_PIN_133_DPIB4__FUNC_CLKM3 (MTK_PIN_NO(133) | 3)
+#define MT8135_PIN_133_DPIB4__FUNC_SCL2 (MTK_PIN_NO(133) | 4)
+#define MT8135_PIN_133_DPIB4__FUNC_PWM4 (MTK_PIN_NO(133) | 5)
+
+#define MT8135_PIN_134_DPIB5__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define MT8135_PIN_134_DPIB5__FUNC_DPI0_B5 (MTK_PIN_NO(134) | 1)
+#define MT8135_PIN_134_DPIB5__FUNC_EINT107 (MTK_PIN_NO(134) | 2)
+#define MT8135_PIN_134_DPIB5__FUNC_CLKM4 (MTK_PIN_NO(134) | 3)
+#define MT8135_PIN_134_DPIB5__FUNC_SDA2 (MTK_PIN_NO(134) | 4)
+#define MT8135_PIN_134_DPIB5__FUNC_PWM5 (MTK_PIN_NO(134) | 5)
+
+#define MT8135_PIN_135_DPIB6__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define MT8135_PIN_135_DPIB6__FUNC_DPI0_B6 (MTK_PIN_NO(135) | 1)
+#define MT8135_PIN_135_DPIB6__FUNC_EINT108 (MTK_PIN_NO(135) | 2)
+#define MT8135_PIN_135_DPIB6__FUNC_CLKM5 (MTK_PIN_NO(135) | 3)
+#define MT8135_PIN_135_DPIB6__FUNC_SCL3 (MTK_PIN_NO(135) | 4)
+#define MT8135_PIN_135_DPIB6__FUNC_PWM6 (MTK_PIN_NO(135) | 5)
+
+#define MT8135_PIN_136_DPIB7__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define MT8135_PIN_136_DPIB7__FUNC_DPI0_B7 (MTK_PIN_NO(136) | 1)
+#define MT8135_PIN_136_DPIB7__FUNC_EINT109 (MTK_PIN_NO(136) | 2)
+#define MT8135_PIN_136_DPIB7__FUNC_CLKM6 (MTK_PIN_NO(136) | 3)
+#define MT8135_PIN_136_DPIB7__FUNC_SDA3 (MTK_PIN_NO(136) | 4)
+#define MT8135_PIN_136_DPIB7__FUNC_PWM7 (MTK_PIN_NO(136) | 5)
+
+#define MT8135_PIN_137_DPIG0__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define MT8135_PIN_137_DPIG0__FUNC_DPI0_G0 (MTK_PIN_NO(137) | 1)
+#define MT8135_PIN_137_DPIG0__FUNC_EINT110 (MTK_PIN_NO(137) | 2)
+#define MT8135_PIN_137_DPIG0__FUNC_DSP1_ID (MTK_PIN_NO(137) | 5)
+
+#define MT8135_PIN_138_DPIG2__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define MT8135_PIN_138_DPIG2__FUNC_DPI0_G2 (MTK_PIN_NO(138) | 1)
+#define MT8135_PIN_138_DPIG2__FUNC_EINT112 (MTK_PIN_NO(138) | 2)
+#define MT8135_PIN_138_DPIG2__FUNC_DSP1_IMS (MTK_PIN_NO(138) | 5)
+
+#define MT8135_PIN_139_DPIG3__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define MT8135_PIN_139_DPIG3__FUNC_DPI0_G3 (MTK_PIN_NO(139) | 1)
+#define MT8135_PIN_139_DPIG3__FUNC_EINT113 (MTK_PIN_NO(139) | 2)
+#define MT8135_PIN_139_DPIG3__FUNC_DSP2_IMS (MTK_PIN_NO(139) | 5)
+
+#define MT8135_PIN_140_DPIG6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define MT8135_PIN_140_DPIG6__FUNC_DPI0_G6 (MTK_PIN_NO(140) | 1)
+#define MT8135_PIN_140_DPIG6__FUNC_EINT116 (MTK_PIN_NO(140) | 2)
+#define MT8135_PIN_140_DPIG6__FUNC_CM2DAT_2X_2 (MTK_PIN_NO(140) | 4)
+
+#define MT8135_PIN_141_DPIG7__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define MT8135_PIN_141_DPIG7__FUNC_DPI0_G7 (MTK_PIN_NO(141) | 1)
+#define MT8135_PIN_141_DPIG7__FUNC_EINT117 (MTK_PIN_NO(141) | 2)
+#define MT8135_PIN_141_DPIG7__FUNC_CM2DAT_2X_3 (MTK_PIN_NO(141) | 4)
+
+#define MT8135_PIN_142_DPIR0__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define MT8135_PIN_142_DPIR0__FUNC_DPI0_R0 (MTK_PIN_NO(142) | 1)
+#define MT8135_PIN_142_DPIR0__FUNC_EINT118 (MTK_PIN_NO(142) | 2)
+#define MT8135_PIN_142_DPIR0__FUNC_CM2DAT_2X_4 (MTK_PIN_NO(142) | 4)
+
+#define MT8135_PIN_143_DPIR1__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define MT8135_PIN_143_DPIR1__FUNC_DPI0_R1 (MTK_PIN_NO(143) | 1)
+#define MT8135_PIN_143_DPIR1__FUNC_EINT119 (MTK_PIN_NO(143) | 2)
+#define MT8135_PIN_143_DPIR1__FUNC_CM2DAT_2X_5 (MTK_PIN_NO(143) | 4)
+
+#define MT8135_PIN_144_DPIR2__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define MT8135_PIN_144_DPIR2__FUNC_DPI0_R2 (MTK_PIN_NO(144) | 1)
+#define MT8135_PIN_144_DPIR2__FUNC_EINT120 (MTK_PIN_NO(144) | 2)
+#define MT8135_PIN_144_DPIR2__FUNC_CM2DAT_2X_6 (MTK_PIN_NO(144) | 4)
+
+#define MT8135_PIN_145_DPIR4__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define MT8135_PIN_145_DPIR4__FUNC_DPI0_R4 (MTK_PIN_NO(145) | 1)
+#define MT8135_PIN_145_DPIR4__FUNC_EINT122 (MTK_PIN_NO(145) | 2)
+#define MT8135_PIN_145_DPIR4__FUNC_CM2DAT_2X_8 (MTK_PIN_NO(145) | 4)
+
+#define MT8135_PIN_146_DPIR5__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define MT8135_PIN_146_DPIR5__FUNC_DPI0_R5 (MTK_PIN_NO(146) | 1)
+#define MT8135_PIN_146_DPIR5__FUNC_EINT123 (MTK_PIN_NO(146) | 2)
+#define MT8135_PIN_146_DPIR5__FUNC_CM2DAT_2X_9 (MTK_PIN_NO(146) | 4)
+
+#define MT8135_PIN_147_DPIR6__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define MT8135_PIN_147_DPIR6__FUNC_DPI0_R6 (MTK_PIN_NO(147) | 1)
+#define MT8135_PIN_147_DPIR6__FUNC_EINT124 (MTK_PIN_NO(147) | 2)
+#define MT8135_PIN_147_DPIR6__FUNC_CM2VSYNC_2X (MTK_PIN_NO(147) | 4)
+
+#define MT8135_PIN_148_DPIR7__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define MT8135_PIN_148_DPIR7__FUNC_DPI0_R7 (MTK_PIN_NO(148) | 1)
+#define MT8135_PIN_148_DPIR7__FUNC_EINT125 (MTK_PIN_NO(148) | 2)
+#define MT8135_PIN_148_DPIR7__FUNC_CM2HSYNC_2X (MTK_PIN_NO(148) | 4)
+
+#define MT8135_PIN_149_TDN3__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define MT8135_PIN_149_TDN3__FUNC_EINT36 (MTK_PIN_NO(149) | 2)
+
+#define MT8135_PIN_150_TDP3__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define MT8135_PIN_150_TDP3__FUNC_EINT35 (MTK_PIN_NO(150) | 2)
+
+#define MT8135_PIN_151_TDN2__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define MT8135_PIN_151_TDN2__FUNC_EINT169 (MTK_PIN_NO(151) | 2)
+
+#define MT8135_PIN_152_TDP2__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define MT8135_PIN_152_TDP2__FUNC_EINT168 (MTK_PIN_NO(152) | 2)
+
+#define MT8135_PIN_153_TCN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define MT8135_PIN_153_TCN__FUNC_EINT163 (MTK_PIN_NO(153) | 2)
+
+#define MT8135_PIN_154_TCP__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define MT8135_PIN_154_TCP__FUNC_EINT162 (MTK_PIN_NO(154) | 2)
+
+#define MT8135_PIN_155_TDN1__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define MT8135_PIN_155_TDN1__FUNC_EINT167 (MTK_PIN_NO(155) | 2)
+
+#define MT8135_PIN_156_TDP1__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define MT8135_PIN_156_TDP1__FUNC_EINT166 (MTK_PIN_NO(156) | 2)
+
+#define MT8135_PIN_157_TDN0__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define MT8135_PIN_157_TDN0__FUNC_EINT165 (MTK_PIN_NO(157) | 2)
+
+#define MT8135_PIN_158_TDP0__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define MT8135_PIN_158_TDP0__FUNC_EINT164 (MTK_PIN_NO(158) | 2)
+
+#define MT8135_PIN_159_RDN3__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define MT8135_PIN_159_RDN3__FUNC_EINT18 (MTK_PIN_NO(159) | 2)
+
+#define MT8135_PIN_160_RDP3__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define MT8135_PIN_160_RDP3__FUNC_EINT30 (MTK_PIN_NO(160) | 2)
+
+#define MT8135_PIN_161_RDN2__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define MT8135_PIN_161_RDN2__FUNC_EINT31 (MTK_PIN_NO(161) | 2)
+
+#define MT8135_PIN_162_RDP2__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define MT8135_PIN_162_RDP2__FUNC_EINT32 (MTK_PIN_NO(162) | 2)
+
+#define MT8135_PIN_163_RCN__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define MT8135_PIN_163_RCN__FUNC_EINT33 (MTK_PIN_NO(163) | 2)
+
+#define MT8135_PIN_164_RCP__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define MT8135_PIN_164_RCP__FUNC_EINT39 (MTK_PIN_NO(164) | 2)
+
+#define MT8135_PIN_165_RDN1__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+
+#define MT8135_PIN_166_RDP1__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+
+#define MT8135_PIN_167_RDN0__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+
+#define MT8135_PIN_168_RDP0__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+
+#define MT8135_PIN_169_RDN1_A__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define MT8135_PIN_169_RDN1_A__FUNC_CMDAT6 (MTK_PIN_NO(169) | 1)
+#define MT8135_PIN_169_RDN1_A__FUNC_EINT175 (MTK_PIN_NO(169) | 2)
+
+#define MT8135_PIN_170_RDP1_A__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define MT8135_PIN_170_RDP1_A__FUNC_CMDAT7 (MTK_PIN_NO(170) | 1)
+#define MT8135_PIN_170_RDP1_A__FUNC_EINT174 (MTK_PIN_NO(170) | 2)
+
+#define MT8135_PIN_171_RCN_A__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define MT8135_PIN_171_RCN_A__FUNC_CMDAT8 (MTK_PIN_NO(171) | 1)
+#define MT8135_PIN_171_RCN_A__FUNC_EINT171 (MTK_PIN_NO(171) | 2)
+
+#define MT8135_PIN_172_RCP_A__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define MT8135_PIN_172_RCP_A__FUNC_CMDAT9 (MTK_PIN_NO(172) | 1)
+#define MT8135_PIN_172_RCP_A__FUNC_EINT170 (MTK_PIN_NO(172) | 2)
+
+#define MT8135_PIN_173_RDN0_A__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define MT8135_PIN_173_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(173) | 1)
+#define MT8135_PIN_173_RDN0_A__FUNC_EINT173 (MTK_PIN_NO(173) | 2)
+
+#define MT8135_PIN_174_RDP0_A__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define MT8135_PIN_174_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(174) | 1)
+#define MT8135_PIN_174_RDP0_A__FUNC_EINT172 (MTK_PIN_NO(174) | 2)
+
+#define MT8135_PIN_175_RDN1_B__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define MT8135_PIN_175_RDN1_B__FUNC_CMDAT2 (MTK_PIN_NO(175) | 1)
+#define MT8135_PIN_175_RDN1_B__FUNC_EINT181 (MTK_PIN_NO(175) | 2)
+#define MT8135_PIN_175_RDN1_B__FUNC_CMCSD2 (MTK_PIN_NO(175) | 3)
+
+#define MT8135_PIN_176_RDP1_B__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define MT8135_PIN_176_RDP1_B__FUNC_CMDAT3 (MTK_PIN_NO(176) | 1)
+#define MT8135_PIN_176_RDP1_B__FUNC_EINT180 (MTK_PIN_NO(176) | 2)
+#define MT8135_PIN_176_RDP1_B__FUNC_CMCSD3 (MTK_PIN_NO(176) | 3)
+
+#define MT8135_PIN_177_RCN_B__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define MT8135_PIN_177_RCN_B__FUNC_CMDAT4 (MTK_PIN_NO(177) | 1)
+#define MT8135_PIN_177_RCN_B__FUNC_EINT177 (MTK_PIN_NO(177) | 2)
+
+#define MT8135_PIN_178_RCP_B__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define MT8135_PIN_178_RCP_B__FUNC_CMDAT5 (MTK_PIN_NO(178) | 1)
+#define MT8135_PIN_178_RCP_B__FUNC_EINT176 (MTK_PIN_NO(178) | 2)
+
+#define MT8135_PIN_179_RDN0_B__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define MT8135_PIN_179_RDN0_B__FUNC_CMDAT0 (MTK_PIN_NO(179) | 1)
+#define MT8135_PIN_179_RDN0_B__FUNC_EINT179 (MTK_PIN_NO(179) | 2)
+#define MT8135_PIN_179_RDN0_B__FUNC_CMCSD0 (MTK_PIN_NO(179) | 3)
+
+#define MT8135_PIN_180_RDP0_B__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define MT8135_PIN_180_RDP0_B__FUNC_CMDAT1 (MTK_PIN_NO(180) | 1)
+#define MT8135_PIN_180_RDP0_B__FUNC_EINT178 (MTK_PIN_NO(180) | 2)
+#define MT8135_PIN_180_RDP0_B__FUNC_CMCSD1 (MTK_PIN_NO(180) | 3)
+
+#define MT8135_PIN_181_CMPCLK__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define MT8135_PIN_181_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(181) | 1)
+#define MT8135_PIN_181_CMPCLK__FUNC_EINT182 (MTK_PIN_NO(181) | 2)
+#define MT8135_PIN_181_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(181) | 3)
+#define MT8135_PIN_181_CMPCLK__FUNC_CM2MCLK_4X (MTK_PIN_NO(181) | 4)
+#define MT8135_PIN_181_CMPCLK__FUNC_TS_AUXADC_SEL_3 (MTK_PIN_NO(181) | 5)
+#define MT8135_PIN_181_CMPCLK__FUNC_VENC_TEST_CK (MTK_PIN_NO(181) | 6)
+#define MT8135_PIN_181_CMPCLK__FUNC_TESTA_OUT27 (MTK_PIN_NO(181) | 7)
+
+#define MT8135_PIN_182_CMMCLK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define MT8135_PIN_182_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(182) | 1)
+#define MT8135_PIN_182_CMMCLK__FUNC_EINT183 (MTK_PIN_NO(182) | 2)
+#define MT8135_PIN_182_CMMCLK__FUNC_TS_AUXADC_SEL_2 (MTK_PIN_NO(182) | 5)
+#define MT8135_PIN_182_CMMCLK__FUNC_TESTA_OUT28 (MTK_PIN_NO(182) | 7)
+
+#define MT8135_PIN_183_CMRST__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define MT8135_PIN_183_CMRST__FUNC_CMRST (MTK_PIN_NO(183) | 1)
+#define MT8135_PIN_183_CMRST__FUNC_EINT185 (MTK_PIN_NO(183) | 2)
+#define MT8135_PIN_183_CMRST__FUNC_TS_AUXADC_SEL_1 (MTK_PIN_NO(183) | 5)
+#define MT8135_PIN_183_CMRST__FUNC_TESTA_OUT30 (MTK_PIN_NO(183) | 7)
+
+#define MT8135_PIN_184_CMPDN__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define MT8135_PIN_184_CMPDN__FUNC_CMPDN (MTK_PIN_NO(184) | 1)
+#define MT8135_PIN_184_CMPDN__FUNC_EINT184 (MTK_PIN_NO(184) | 2)
+#define MT8135_PIN_184_CMPDN__FUNC_TS_AUXADC_SEL_0 (MTK_PIN_NO(184) | 5)
+#define MT8135_PIN_184_CMPDN__FUNC_TESTA_OUT29 (MTK_PIN_NO(184) | 7)
+
+#define MT8135_PIN_185_CMFLASH__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define MT8135_PIN_185_CMFLASH__FUNC_CMFLASH (MTK_PIN_NO(185) | 1)
+#define MT8135_PIN_185_CMFLASH__FUNC_EINT186 (MTK_PIN_NO(185) | 2)
+#define MT8135_PIN_185_CMFLASH__FUNC_CM2MCLK_3X (MTK_PIN_NO(185) | 3)
+#define MT8135_PIN_185_CMFLASH__FUNC_MFG_TEST_CK_1 (MTK_PIN_NO(185) | 6)
+#define MT8135_PIN_185_CMFLASH__FUNC_TESTA_OUT31 (MTK_PIN_NO(185) | 7)
+
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_MRG_I2S_P_CLK (MTK_PIN_NO(186) | 1)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_EINT14 (MTK_PIN_NO(186) | 2)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(186) | 3)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_PCM0_CK (MTK_PIN_NO(186) | 4)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_DSP2_ICK (MTK_PIN_NO(186) | 5)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_IMG_TEST_CK (MTK_PIN_NO(186) | 6)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_USB_SCL (MTK_PIN_NO(186) | 7)
+
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_MRG_I2S_SYNC (MTK_PIN_NO(187) | 1)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_EINT16 (MTK_PIN_NO(187) | 2)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_I2SIN_WS (MTK_PIN_NO(187) | 3)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_PCM0_WS (MTK_PIN_NO(187) | 4)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_DISP_TEST_CK (MTK_PIN_NO(187) | 6)
+
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MRG_I2S_PCM_RX (MTK_PIN_NO(188) | 1)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_EINT15 (MTK_PIN_NO(188) | 2)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_I2SIN_DAT (MTK_PIN_NO(188) | 3)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_PCM0_DI (MTK_PIN_NO(188) | 4)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_DSP2_ID (MTK_PIN_NO(188) | 5)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MFG_TEST_CK (MTK_PIN_NO(188) | 6)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_USB_SDA (MTK_PIN_NO(188) | 7)
+
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_MRG_I2S_PCM_TX (MTK_PIN_NO(189) | 1)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_EINT17 (MTK_PIN_NO(189) | 2)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_I2SOUT_DAT (MTK_PIN_NO(189) | 3)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_PCM0_DO (MTK_PIN_NO(189) | 4)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_VDEC_TEST_CK (MTK_PIN_NO(189) | 6)
+
+#define MT8135_PIN_190_SRCLKENAI__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define MT8135_PIN_190_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(190) | 1)
+
+#define MT8135_PIN_191_URXD3__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define MT8135_PIN_191_URXD3__FUNC_URXD3 (MTK_PIN_NO(191) | 1)
+#define MT8135_PIN_191_URXD3__FUNC_EINT87 (MTK_PIN_NO(191) | 2)
+#define MT8135_PIN_191_URXD3__FUNC_UTXD3 (MTK_PIN_NO(191) | 3)
+#define MT8135_PIN_191_URXD3__FUNC_TS_AUX_ST (MTK_PIN_NO(191) | 5)
+#define MT8135_PIN_191_URXD3__FUNC_PWM4 (MTK_PIN_NO(191) | 6)
+
+#define MT8135_PIN_192_UTXD3__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define MT8135_PIN_192_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(192) | 1)
+#define MT8135_PIN_192_UTXD3__FUNC_EINT86 (MTK_PIN_NO(192) | 2)
+#define MT8135_PIN_192_UTXD3__FUNC_URXD3 (MTK_PIN_NO(192) | 3)
+#define MT8135_PIN_192_UTXD3__FUNC_TS_AUX_CS_B (MTK_PIN_NO(192) | 5)
+#define MT8135_PIN_192_UTXD3__FUNC_PWM3 (MTK_PIN_NO(192) | 6)
+
+#define MT8135_PIN_193_SDA2__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define MT8135_PIN_193_SDA2__FUNC_SDA2 (MTK_PIN_NO(193) | 1)
+#define MT8135_PIN_193_SDA2__FUNC_EINT95 (MTK_PIN_NO(193) | 2)
+#define MT8135_PIN_193_SDA2__FUNC_CLKM5 (MTK_PIN_NO(193) | 3)
+#define MT8135_PIN_193_SDA2__FUNC_PWM5 (MTK_PIN_NO(193) | 4)
+#define MT8135_PIN_193_SDA2__FUNC_TS_AUX_PWDB (MTK_PIN_NO(193) | 5)
+
+#define MT8135_PIN_194_SCL2__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define MT8135_PIN_194_SCL2__FUNC_SCL2 (MTK_PIN_NO(194) | 1)
+#define MT8135_PIN_194_SCL2__FUNC_EINT94 (MTK_PIN_NO(194) | 2)
+#define MT8135_PIN_194_SCL2__FUNC_CLKM4 (MTK_PIN_NO(194) | 3)
+#define MT8135_PIN_194_SCL2__FUNC_PWM4 (MTK_PIN_NO(194) | 4)
+#define MT8135_PIN_194_SCL2__FUNC_TS_AUXADC_TEST_CK (MTK_PIN_NO(194) | 5)
+
+#define MT8135_PIN_195_SDA1__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define MT8135_PIN_195_SDA1__FUNC_SDA1 (MTK_PIN_NO(195) | 1)
+#define MT8135_PIN_195_SDA1__FUNC_EINT93 (MTK_PIN_NO(195) | 2)
+#define MT8135_PIN_195_SDA1__FUNC_CLKM3 (MTK_PIN_NO(195) | 3)
+#define MT8135_PIN_195_SDA1__FUNC_PWM3 (MTK_PIN_NO(195) | 4)
+#define MT8135_PIN_195_SDA1__FUNC_TS_AUX_SCLK_PWDB (MTK_PIN_NO(195) | 5)
+
+#define MT8135_PIN_196_SCL1__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define MT8135_PIN_196_SCL1__FUNC_SCL1 (MTK_PIN_NO(196) | 1)
+#define MT8135_PIN_196_SCL1__FUNC_EINT92 (MTK_PIN_NO(196) | 2)
+#define MT8135_PIN_196_SCL1__FUNC_CLKM2 (MTK_PIN_NO(196) | 3)
+#define MT8135_PIN_196_SCL1__FUNC_PWM2 (MTK_PIN_NO(196) | 4)
+#define MT8135_PIN_196_SCL1__FUNC_TS_AUX_DIN (MTK_PIN_NO(196) | 5)
+
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(197) | 1)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_EINT71 (MTK_PIN_NO(197) | 2)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_SCL6 (MTK_PIN_NO(197) | 3)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_PWM5 (MTK_PIN_NO(197) | 4)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_CLKM4 (MTK_PIN_NO(197) | 5)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MFG_TEST_CK_2 (MTK_PIN_NO(197) | 6)
+
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(198) | 1)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_EINT72 (MTK_PIN_NO(198) | 2)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_SDA6 (MTK_PIN_NO(198) | 3)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_PWM6 (MTK_PIN_NO(198) | 4)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_CLKM5 (MTK_PIN_NO(198) | 5)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MFG_TEST_CK_3 (MTK_PIN_NO(198) | 6)
+
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(199) | 1)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_EINT68 (MTK_PIN_NO(199) | 2)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_SDA2 (MTK_PIN_NO(199) | 3)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_PWM2 (MTK_PIN_NO(199) | 4)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_CLKM1 (MTK_PIN_NO(199) | 5)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_MFG_TEST_CK_4 (MTK_PIN_NO(199) | 6)
+
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(200) | 1)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_EINT67 (MTK_PIN_NO(200) | 2)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_SCL2 (MTK_PIN_NO(200) | 3)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_PWM1 (MTK_PIN_NO(200) | 4)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_CLKM0 (MTK_PIN_NO(200) | 5)
+
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(201) | 1)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_EINT70 (MTK_PIN_NO(201) | 2)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_SDA3 (MTK_PIN_NO(201) | 3)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_PWM4 (MTK_PIN_NO(201) | 4)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_CLKM3 (MTK_PIN_NO(201) | 5)
+
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(202) | 1)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_EINT69 (MTK_PIN_NO(202) | 2)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_SCL3 (MTK_PIN_NO(202) | 3)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_PWM3 (MTK_PIN_NO(202) | 4)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_CLKM2 (MTK_PIN_NO(202) | 5)
+
+#endif /* __DTS_MT8135_PINFUNC_H */
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton64.dtsi"
+#include "mt8135-pinfunc.h"
/ {
compatible = "mediatek,mt8135";
compatible = "simple-bus";
ranges;
+ /*
+ * Pinctrl access register at 0x10005000 and 0x1020c000 through
+ * regmap. Register 0x1000b000 is used by EINT.
+ */
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8135-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ syscfg_pctl_a: syscfg_pctl_a@10005000 {
+ compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
+ reg = <0 0x10005000 0 0x1000>;
+ };
+
timer: timer@10008000 {
compatible = "mediatek,mt8135-timer",
"mediatek,mt6577-timer";
reg = <0 0x10200030 0 0x1c>;
};
+ syscfg_pctl_b: syscfg_pctl_b@1020c000 {
+ compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
+ reg = <0 0x1020c000 0 0x1000>;
+ };
+
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
};
&mmc1 {
+ interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
ti,mcbsp = <&mcbsp2>;
};
+ /* GSM audio */
+ sound_telephony {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "GTA04 voice";
+ simple-audio-card,bitclock-master = <&telephony_link_master>;
+ simple-audio-card,frame-master = <&telephony_link_master>;
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp4>;
+ };
+
+ telephony_link_master: simple-audio-card,codec {
+ sound-dai = <>m601_codec>;
+ };
+ };
+
+ gtm601_codec: gsm_codec {
+ compatible = "option,gtm601";
+ #sound-dai-cells = <0>;
+ };
+
spi_lcd {
compatible = "spi-gpio";
#address-cells = <0x1>;
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
>;
};
+
+ hdq_pins: hdq_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
+ >;
+ };
};
&omap3_pmx_core2 {
&mcbsp2 {
status = "okay";
};
+
+&hdqw1w {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdq_pins>;
+};
+
+&mcbsp4 {
+ status = "okay";
+};
key_enter {
label = "enter";
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
- linux,code = <0x0107001c>; /* KEY_ENTER */
+ linux,code = <KEY_ENTER>;
gpio-key,wakeup;
};
key_f1 {
label = "f1";
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
- linux,code = <0x0303003b>; /* KEY_F1 */
+ linux,code = <KEY_F1>;
gpio-key,wakeup;
};
key_f2 {
label = "f2";
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
- linux,code = <0x0403003c>; /* KEY_F2 */
+ linux,code = <KEY_F2>;
gpio-key,wakeup;
};
key_f3 {
label = "f3";
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
- linux,code = <0x0503003d>; /* KEY_F3 */
+ linux,code = <KEY_F3>;
gpio-key,wakeup;
};
key_f4 {
label = "f4";
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
- linux,code = <0x0704003e>; /* KEY_F4 */
+ linux,code = <KEY_F4>;
gpio-key,wakeup;
};
key_left {
label = "left";
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
- linux,code = <0x04070069>; /* KEY_LEFT */
+ linux,code = <KEY_LEFT>;
gpio-key,wakeup;
};
key_right {
label = "right";
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
- linux,code = <0x0507006a>; /* KEY_RIGHT */
+ linux,code = <KEY_RIGHT>;
gpio-key,wakeup;
};
key_up {
label = "up";
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
- linux,code = <0x06070067>; /* KEY_UP */
+ linux,code = <KEY_UP>;
gpio-key,wakeup;
};
key_down {
label = "down";
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
- linux,code = <0x0707006c>; /* KEY_DOWN */
+ linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
};
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <1>;
};
tlv320aic3x_aux: tlv320aic3x@19 {
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <2>;
};
tsl2563: tsl2563@29 {
};
mmu_isp: mmu@480bd400 {
+ #iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x480bd400 0x80>;
interrupts = <24>;
};
mmu_iva: mmu@5d000000 {
+ #iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x5d000000 0x80>;
interrupts = <28>;
};
&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
};
&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <&omap5_pmx_core 0x19c>;
};
&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart5_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pins>;
};
&cpu0 {
* hierarchy.
*/
ocp {
- compatible = "ti,omap4-l3-noc", "simple-bus";
+ compatible = "ti,omap5-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
/* The pxa3xx skeleton simply augments the 2xx version */
#include "pxa2xx.dtsi"
-#include "dt-bindings/clock/pxa2xx-clock.h"
+#include "dt-bindings/clock/pxa-clock.h"
/ {
model = "Marvell PXA27x familiy SoC";
marvell,intc-nr-irqs = <34>;
};
+ gpio: gpio@40e00000 {
+ compatible = "intel,pxa27x-gpio";
+ clocks = <&clks CLK_NONE>;
+ };
+
pwm0: pwm@40b00000 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40b00000 0x10>;
#pwm-cells = <1>;
+ clocks = <&clks CLK_PWM0>;
};
pwm1: pwm@40b00010 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40b00010 0x10>;
#pwm-cells = <1>;
+ clocks = <&clks CLK_PWM1>;
};
pwm2: pwm@40c00000 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40c00000 0x10>;
#pwm-cells = <1>;
+ clocks = <&clks CLK_PWM0>;
};
pwm3: pwm@40c00010 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40c00010 0x10>;
#pwm-cells = <1>;
+ clocks = <&clks CLK_PWM1>;
+ };
+
+ pwri2c: i2c@40f000180 {
+ compatible = "mrvl,pxa-i2c";
+ reg = <0x40f00180 0x24>;
+ interrupts = <6>;
+ clocks = <&clks CLK_PWRI2C>;
+ status = "disabled";
+ };
+
+ pxa27x_udc: udc@40600000 {
+ compatible = "marvell,pxa270-udc";
+ reg = <0x40600000 0x10000>;
+ interrupts = <11>;
+ clocks = <&clks CLK_USB>;
+ status = "disabled";
+ };
+
+ keypad: keypad@41500000 {
+ compatible = "marvell,pxa27x-keypad";
+ reg = <0x41500000 0x4c>;
+ interrupts = <4>;
+ clocks = <&clks CLK_KEYPAD>;
+ status = "disabled";
};
};
#size-cells = <1>;
ranges;
- pxa2xx_clks: pxa2xx_clks@41300004 {
- compatible = "marvell,pxa-clocks";
+ clks: pxa2xx_clks@41300004 {
+ compatible = "marvell,pxa270-clocks";
#clock-cells = <1>;
status = "okay";
};
};
+ timer@40a00000 {
+ compatible = "marvell,pxa-timer";
+ reg = <0x40a00000 0x20>;
+ interrupts = <26>;
+ clocks = <&clks CLK_OSTIMER>;
+ status = "okay";
+ };
};
* Licensed under GPLv2 or later.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include "dt-bindings/clock/pxa-clock.h"
/ {
model = "Marvell PXA2xx family SoC";
compatible = "mrvl,pxa-uart";
reg = <0x40100000 0x30>;
interrupts = <22>;
+ clocks = <&clks CLK_FFUART>;
status = "disabled";
};
compatible = "mrvl,pxa-uart";
reg = <0x40200000 0x30>;
interrupts = <21>;
+ clocks = <&clks CLK_BTUART>;
status = "disabled";
};
compatible = "mrvl,pxa-uart";
reg = <0x40700000 0x30>;
interrupts = <20>;
+ clocks = <&clks CLK_STUART>;
status = "disabled";
};
compatible = "mrvl,pxa-i2c";
reg = <0x40301680 0x30>;
interrupts = <18>;
+ clocks = <&clks CLK_I2C>;
#address-cells = <0x1>;
#size-cells = <0>;
status = "disabled";
/* The pxa3xx skeleton simply augments the 2xx version */
-/include/ "pxa2xx.dtsi"
+#include "pxa2xx.dtsi"
/ {
model = "Marvell PXA3xx familiy SoC";
compatible = "mrvl,pwri2c";
reg = <0x40f500c0 0x30>;
interrupts = <6>;
+ clocks = <&clks CLK_PWRI2C>;
#address-cells = <0x1>;
#size-cells = <0>;
status = "disabled";
compatible = "marvell,pxa3xx-nand";
reg = <0x43100000 90>;
interrupts = <45>;
+ clocks = <&clks CLK_NAND>;
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
gpio: gpio@40e00000 {
compatible = "intel,pxa3xx-gpio";
reg = <0x40e00000 0x10000>;
+ clocks = <&clks CLK_GPIO>;
interrupt-names = "gpio0", "gpio1", "gpio_mux";
interrupts = <8 9 10>;
gpio-controller;
#interrupt-cells = <0x2>;
};
};
+
+ clocks {
+ /*
+ * The muxing of external clocks/internal dividers for osc* clock
+ * sources has been hidden under the carpet by now.
+ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clks: pxa3xx_clks@41300004 {
+ compatible = "marvell,pxa300-clocks";
+ #clock-cells = <1>;
+ status = "okay";
+ };
+ };
+
+ timer@40a00000 {
+ compatible = "marvell,pxa-timer";
+ reg = <0x40a00000 0x20>;
+ interrupts = <26>;
+ clocks = <&clks CLK_OSTIMER>;
+ status = "okay";
+ };
};
};
};
+ rpm@108000 {
+ regulators {
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s1>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l26-supply = <&pm8921_s7>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ qcom,switch-mode-frequency = <4800000>;
+ };
+
+ pm8921_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3050000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+ };
+ };
+
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
};
};
+ /* OTG */
+ usb1_phy: phy@12500000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ usb3_phy: phy@12520000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ usb4_phy: phy@12530000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ gadget1: gadget@12500000 {
+ status = "ok";
+ };
+
+ /* OTG */
+ usb1: usb@12500000 {
+ status = "ok";
+ };
+
+ usb3: usb@12520000 {
+ status = "okay";
+ };
+
+ usb4: usb@12530000 {
+ status = "okay";
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
model = "Qualcomm APQ8064/IFC6410";
compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
+ aliases {
+ serial0 = &gsbi7_serial;
+ };
+
soc {
pinctrl@800000 {
- i2c1_pins: i2c1 {
- mux {
- pins = "gpio20", "gpio21";
- function = "gsbi1";
- };
- };
-
card_detect: card_detect {
mux {
pins = "gpio26";
};
};
+ rpm@108000 {
+ regulators {
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s1>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l26-supply = <&pm8921_s7>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ qcom,switch-mode-frequency = <4800000>;
+ };
+
+ pm8921_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3050000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l6: l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+ };
+ };
+
+ gsbi3: gsbi@16200000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+ i2c3: i2c@16280000 {
+ status = "okay";
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ };
+ };
+
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
};
};
+ sata_phy0: phy@1b400000 {
+ status = "okay";
+ };
+
+ sata0: sata@29000000 {
+ status = "okay";
+ target-supply = <&pm8921_s4>;
+ };
+
+ /* OTG */
+ usb1_phy: phy@12500000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ usb3_phy: phy@12520000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ usb4_phy: phy@12530000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ gadget1: gadget@12500000 {
+ status = "okay";
+ };
+
+ /* OTG */
+ usb1: usb@12500000 {
+ status = "okay";
+ };
+
+ usb3: usb@12520000 {
+ status = "okay";
+ };
+
+ usb4: usb@12530000 {
+ status = "okay";
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
function = "ps_hold";
};
};
+
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ };
+ };
+
+ i2c3_pins: i2c3 {
+ mux {
+ pins = "gpio8", "gpio9";
+ function = "gsbi3";
+ };
+ };
};
intc: interrupt-controller@2000000 {
};
};
+ gsbi3: gsbi@16200000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x16200000 0x100>;
+ clocks = <&gcc GSBI3_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ i2c3: i2c@16280000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16280000 0x1000>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI3_QUP_CLK>,
+ <&gcc GSBI3_H_CLK>;
+ clock-names = "core", "iface";
+ };
+ };
+
gsbi7: gsbi@16600000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
#address-cells = <1>;
#size-cells = <1>;
ranges;
-
syscon-tcsr = <&tcsr>;
- serial@16640000 {
+ gsbi7_serial: serial@16640000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
<0x16600000 0x1000>;
#reset-cells = <1>;
};
+ l2cc: clock-controller@2011000 {
+ compatible = "syscon";
+ reg = <0x2011000 0x1000>;
+ };
+
+ rpm@108000 {
+ compatible = "qcom,rpm-apq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+
+ pm8921_hdmi_switch: hdmi-switch {
+ bias-pull-down;
+ };
+ };
+ };
+
+ usb1_phy: phy@12500000 {
+ compatible = "qcom,usb-otg-ci";
+ reg = <0x12500000 0x400>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
+ status = "disabled";
+ dr_mode = "host";
+
+ clocks = <&gcc USB_HS1_XCVR_CLK>,
+ <&gcc USB_HS1_H_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc USB_HS1_RESET>;
+ reset-names = "link";
+ };
+
+ usb3_phy: phy@12520000 {
+ compatible = "qcom,usb-otg-ci";
+ reg = <0x12520000 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ status = "disabled";
+ dr_mode = "host";
+
+ clocks = <&gcc USB_HS3_XCVR_CLK>,
+ <&gcc USB_HS3_H_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc USB_HS3_RESET>;
+ reset-names = "link";
+ };
+
+ usb4_phy: phy@12530000 {
+ compatible = "qcom,usb-otg-ci";
+ reg = <0x12530000 0x400>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
+ status = "disabled";
+ dr_mode = "host";
+
+ clocks = <&gcc USB_HS4_XCVR_CLK>,
+ <&gcc USB_HS4_H_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc USB_HS4_RESET>;
+ reset-names = "link";
+ };
+
+ gadget1: gadget@12500000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x12500000 0x400>;
+ status = "disabled";
+ dr_mode = "peripheral";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
+ usb-phy = <&usb1_phy>;
+ };
+
+ usb1: usb@12500000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x12500000 0x400>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
+ status = "disabled";
+ usb-phy = <&usb1_phy>;
+ };
+
+ usb3: usb@12520000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x12520000 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ status = "disabled";
+ usb-phy = <&usb3_phy>;
+ };
+
+ usb4: usb@12530000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x12530000 0x400>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
+ status = "disabled";
+ usb-phy = <&usb4_phy>;
+ };
+
+ sata_phy0: phy@1b400000 {
+ compatible = "qcom,apq8064-sata-phy";
+ status = "disabled";
+ reg = <0x1b400000 0x200>;
+ reg-names = "phy_mem";
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+ #phy-cells = <0>;
+ };
+
+ sata0: sata@29000000 {
+ compatible = "generic-ahci";
+ status = "disabled";
+ reg = <0x29000000 0x180>;
+ interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
+
+ clocks = <&gcc SFAB_SATA_S_H_CLK>,
+ <&gcc SATA_H_CLK>,
+ <&gcc SATA_A_CLK>,
+ <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ clock-names = "slave_iface",
+ "iface",
+ "bus",
+ "rxoob",
+ "core_pmalive";
+
+ assigned-clocks = <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ assigned-clock-rates = <100000000>, <100000000>;
+
+ phys = <&sata_phy0>;
+ phy-names = "sata-phy";
+ };
+
/* Temporary fixed regulator */
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
};
};
+ cpu-pmu {
+ compatible = "qcom,scorpion-mp-pmu";
+ interrupts = <1 9 0x304>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8841_mpps: mpps@a000 {
+ compatible = "qcom,pm8841-mpp";
+ reg = <0xa000 0x400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
+ <4 0xa1 0 IRQ_TYPE_NONE>,
+ <4 0xa2 0 IRQ_TYPE_NONE>,
+ <4 0xa3 0 IRQ_TYPE_NONE>;
+ };
+
+ temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ };
};
usid5: pm8841@5 {
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000 0x100>,
+ <0x6100 0x100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pwrkey@800 {
+ compatible = "qcom,pm8941-pwrkey";
+ reg = <0x800 0x100>;
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ };
+
+ pm8941_gpios: gpios@c000 {
+ compatible = "qcom,pm8941-gpio";
+ reg = <0xc000 0x2400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>,
+ <0 0xce 0 IRQ_TYPE_NONE>,
+ <0 0xcf 0 IRQ_TYPE_NONE>,
+ <0 0xd0 0 IRQ_TYPE_NONE>,
+ <0 0xd1 0 IRQ_TYPE_NONE>,
+ <0 0xd2 0 IRQ_TYPE_NONE>,
+ <0 0xd3 0 IRQ_TYPE_NONE>,
+ <0 0xd4 0 IRQ_TYPE_NONE>,
+ <0 0xd5 0 IRQ_TYPE_NONE>,
+ <0 0xd6 0 IRQ_TYPE_NONE>,
+ <0 0xd7 0 IRQ_TYPE_NONE>,
+ <0 0xd8 0 IRQ_TYPE_NONE>,
+ <0 0xd9 0 IRQ_TYPE_NONE>,
+ <0 0xda 0 IRQ_TYPE_NONE>,
+ <0 0xdb 0 IRQ_TYPE_NONE>,
+ <0 0xdc 0 IRQ_TYPE_NONE>,
+ <0 0xdd 0 IRQ_TYPE_NONE>,
+ <0 0xde 0 IRQ_TYPE_NONE>,
+ <0 0xdf 0 IRQ_TYPE_NONE>,
+ <0 0xe0 0 IRQ_TYPE_NONE>,
+ <0 0xe1 0 IRQ_TYPE_NONE>,
+ <0 0xe2 0 IRQ_TYPE_NONE>,
+ <0 0xe3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8941_mpps: mpps@a000 {
+ compatible = "qcom,pm8941-mpp";
+ reg = <0xa000 0x800>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>,
+ <0 0xa4 0 IRQ_TYPE_NONE>,
+ <0 0xa5 0 IRQ_TYPE_NONE>,
+ <0 0xa6 0 IRQ_TYPE_NONE>,
+ <0 0xa7 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8941_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8941_vadc: vadc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100 0x100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ die_temp {
+ reg = <VADC_DIE_TEMP>;
+ };
+ ref_625mv {
+ reg = <VADC_REF_625MV>;
+ };
+ ref_1250v {
+ reg = <VADC_REF_1250MV>;
+ };
+ ref_gnd {
+ reg = <VADC_GND_REF>;
+ };
+ ref_vdd {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
+
+ pm8941_iadc: iadc@3600 {
+ compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
+ reg = <0x3600 0x100>,
+ <0x12f1 0x1>;
+ interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+ qcom,external-resistor-micro-ohms = <10000>;
+ };
};
usid1: pm8941@1 {
- compatible ="qcom,spmi-pmic";
+ compatible = "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ wled@d800 {
+ compatible = "qcom,pm8941-wled";
+ reg = <0xd800 0x100>;
+ label = "backlight";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+ };
};
};
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000 0x100>,
+ <0x6100 0x100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pma8084_gpios: gpios@c000 {
+ compatible = "qcom,pma8084-gpio";
+ reg = <0xc000 0x1600>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>,
+ <0 0xce 0 IRQ_TYPE_NONE>,
+ <0 0xcf 0 IRQ_TYPE_NONE>,
+ <0 0xd0 0 IRQ_TYPE_NONE>,
+ <0 0xd1 0 IRQ_TYPE_NONE>,
+ <0 0xd2 0 IRQ_TYPE_NONE>,
+ <0 0xd3 0 IRQ_TYPE_NONE>,
+ <0 0xd4 0 IRQ_TYPE_NONE>,
+ <0 0xd5 0 IRQ_TYPE_NONE>;
+ };
+
+ pma8084_mpps: mpps@a000 {
+ compatible = "qcom,pma8084-mpp";
+ reg = <0xa000 0x800>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>,
+ <0 0xa4 0 IRQ_TYPE_NONE>,
+ <0 0xa5 0 IRQ_TYPE_NONE>,
+ <0 0xa6 0 IRQ_TYPE_NONE>,
+ <0 0xa7 0 IRQ_TYPE_NONE>;
+ };
+
+ pma8084_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ };
+
+ pma8084_vadc: vadc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100 0x100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ die_temp {
+ reg = <VADC_DIE_TEMP>;
+ };
+ ref_625mv {
+ reg = <VADC_REF_625MV>;
+ };
+ ref_1250v {
+ reg = <VADC_REF_1250MV>;
+ };
+ ref_buf_625mv {
+ reg = <VADC_SPARE1>;
+ };
+ ref_gnd {
+ reg = <VADC_GND_REF>;
+ };
+ ref_vdd {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
};
usid1: pma8084@1 {
&i2c5 {
status = "okay";
- vdd_dvfs: max8973@1b {
+ vdd_dvfs: regulator@1b {
compatible = "maxim,max8973";
reg = <0x1b>;
<0 29 IRQ_TYPE_LEVEL_HIGH>,
<0 30 IRQ_TYPE_LEVEL_HIGH>,
<0 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
power-domains = <&pd_c4>;
};
<0 55 IRQ_TYPE_LEVEL_HIGH>,
<0 56 IRQ_TYPE_LEVEL_HIGH>,
<0 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
power-domains = <&pd_c4>;
};
mstp4_clks: mstp4_clks@e6150140 {
compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
+ clocks = <&main_div2_clk>, <&main_div2_clk>,
+ <&cpg_clocks R8A73A4_CLK_HP>,
<&cpg_clocks R8A73A4_CLK_HP>;
#clock-cells = <1>;
clock-indices = <
- R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4
- R8A73A4_CLK_IIC3
+ R8A73A4_CLK_IRQC R8A73A4_CLK_IIC5
+ R8A73A4_CLK_IIC4 R8A73A4_CLK_IIC3
>;
clock-output-names =
- "iic5", "iic4", "iic3";
+ "irqc", "iic5", "iic4", "iic3";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
};
- wm8978: wm8978@1a {
+ wm8978: codec@1a {
#sound-dai-cells = <0>;
compatible = "wlf,wm8978";
reg = <0x1a>;
};
/* irqpin0: IRQ0 - IRQ7 */
- irqpin0: irqpin@e6900000 {
+ irqpin0: interrupt-controller@e6900000 {
compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
};
/* irqpin1: IRQ8 - IRQ15 */
- irqpin1: irqpin@e6900004 {
+ irqpin1: interrupt-controller@e6900004 {
compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
};
/* irqpin2: IRQ16 - IRQ23 */
- irqpin2: irqpin@e6900008 {
+ irqpin2: interrupt-controller@e6900008 {
compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
};
/* irqpin3: IRQ24 - IRQ31 */
- irqpin3: irqpin@e690000c {
+ irqpin3: interrupt-controller@e690000c {
compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
status = "disabled";
};
- scifb8: serial@e6c30000 {
+ scifb: serial@e6c30000 {
compatible = "renesas,scifb-r8a7740", "renesas,scifb";
reg = <0xe6c30000 0x100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl008k";
+ compatible = "spansion,s25fl008k", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
&i2c0 {
status = "okay";
- ak4643: sound-codec@12 {
+ ak4643: codec@12 {
compatible = "asahi-kasei,ak4643";
#sound-dai-cells = <0>;
reg = <0x12>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl008k";
+ compatible = "spansion,s25fl008k", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
};
/* irqpin: IRQ0 - IRQ3 */
- irqpin: irqpin@fe78001c {
+ irqpin: interrupt-controller@fe78001c {
compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
regulator-always-on;
};
- lan0@18000000 {
+ ethernet@18000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x18000000 0x100>;
- pinctrl-0 = <&lan0_pins>;
+ pinctrl-0 = <ðernet_pins>;
pinctrl-names = "default";
phy-mode = "mii";
};
};
- lan0_pins: lan0 {
+ ethernet_pins: ethernet {
intc {
renesas,groups = "intc_irq1_b";
renesas,function = "intc";
interrupt-controller;
};
- irqpin0: irqpin@fe780010 {
+ irqpin0: interrupt-controller@fe780010 {
compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
#interrupt-cells = <2>;
status = "disabled";
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl512s";
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
clock-frequency = <100000>;
- ak4643: sound-codec@12 {
+ ak4643: codec@12 {
compatible = "asahi-kasei,ak4643";
#sound-dai-cells = <0>;
reg = <0x12>;
<0 1 IRQ_TYPE_LEVEL_HIGH>,
<0 2 IRQ_TYPE_LEVEL_HIGH>,
<0 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
};
dmac0: dma-controller@e6700000 {
dma-channels = <13>;
};
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
+ 0 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
+ 0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
dma-names = "tx", "rx";
reg-io-width = <4>;
status = "disabled";
+ max-frequency = <97500000>;
};
mmcif1: mmc@ee220000 {
dma-names = "tx", "rx";
reg-io-width = <4>;
status = "disabled";
+ max-frequency = <97500000>;
};
pfc: pfc@e6060000 {
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
status = "disabled";
};
"iic0", "pciec", "iic1", "ssusb", "cmt1",
"usbdmac0", "usbdmac1";
};
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+ clocks = <&cp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7790_CLK_IRQC>;
+ clock-output-names = "irqc";
+ };
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
msiof1: spi@e6e10000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
+ reg = <0 0xe6e10000 0 0x0064>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
msiof2: spi@e6e00000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
+ reg = <0 0xe6e00000 0 0x0064>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
msiof3: spi@e6c90000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>;
+ reg = <0 0xe6c90000 0 0x0064>;
interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
dmas = <&dmac0 0x45>, <&dmac0 0x46>;
status = "disabled";
};
- rcar_sound: rcar_sound@ec500000 {
+ rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
*
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl512s";
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl512s";
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
status = "okay";
clock-frequency = <100000>;
- ak4643: sound-codec@12 {
+ ak4643: codec@12 {
compatible = "asahi-kasei,ak4643";
#sound-dai-cells = <0>;
reg = <0x12>;
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio3>;
- interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
<0 15 IRQ_TYPE_LEVEL_HIGH>,
<0 16 IRQ_TYPE_LEVEL_HIGH>,
<0 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
};
dmac0: dma-controller@e6700000 {
dma-channels = <13>;
};
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
+ 0 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
+ 0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 {
#address-cells = <1>;
dma-names = "tx", "rx";
reg-io-width = <4>;
status = "disabled";
+ max-frequency = <97500000>;
};
sdhi0: sd@ee100000 {
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
+ dma-names = "tx", "rx";
status = "disabled";
};
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
status = "disabled";
};
"mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1",
"usbdmac0", "usbdmac1";
};
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+ clocks = <&cp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7791_CLK_IRQC>;
+ clock-output-names = "irqc";
+ };
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
msiof1: spi@e6e10000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
+ reg = <0 0xe6e10000 0 0x0064>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
msiof2: spi@e6e00000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
+ reg = <0 0xe6e00000 0 0x0064>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
status = "disabled";
};
- rcar_sound: rcar_sound@ec500000 {
+ rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
*
<0 15 IRQ_TYPE_LEVEL_HIGH>,
<0 16 IRQ_TYPE_LEVEL_HIGH>,
<0 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
};
dmac0: dma-controller@e6700000 {
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
+ dma-names = "tx", "rx";
status = "disabled";
};
"sdhi2", "sdhi1", "sdhi0",
"mmcif0", "cmt1", "usbdmac0", "usbdmac1";
};
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+ clocks = <&cp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7794_CLK_IRQC>;
+ clock-output-names = "irqc";
+ };
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
/*
* Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
compatible = "active-semi,act8846";
reg = <0x5a>;
status = "okay";
+ system-power-controller;
pinctrl-names = "default";
pinctrl-0 = <&act8846_dvs0_ctl>;
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/pwm/pwm.h>
regulator-always-on;
regulator-boot-on;
};
+
+ /*
+ * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
+ * vcc_io directly. Those boards won't be able to power cycle SD cards
+ * but it shouldn't hurt to toggle this pin there anyway.
+ */
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
};
&emmc {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
status = "okay";
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
};
&i2c0 {
sdmmc_cmd: sdmmc-cmd {
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
};
+
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
usb {
pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
system-power-controller;
+ vp1-supply = <&vcc_sys>;
+ vp2-supply = <&vcc_sys>;
+ vp3-supply = <&vcc_sys>;
+ vp4-supply = <&vcc_sys>;
+ inl1-supply = <&vcc_sys>;
+ inl2-supply = <&vcc_sys>;
+ inl3-supply = <&vcc_20>;
+
regulators {
vcc_ddr: REG1 {
regulator-name = "vcc_ddr";
status = "okay";
};
+&tsadc {
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
};
};
+&tsadc {
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
&vopb {
status = "okay";
};
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/thermal/thermal.h>
/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
spi2 = &spi2;
};
+ arm-pmu {
+ compatible = "arm,cortex-a12-pmu";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST1>;
clock-names = "otg";
+ dr_mode = "host";
phys = <&usbphy2>;
phy-names = "usb2-phy";
status = "disabled";
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG0>;
clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <275>;
+ g-tx-fifo-size = <256 128 128 64 64 32>;
+ g-use-dma;
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/irq.h>
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
- <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ehci_clk", "uhpck";
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
#address-cells = <1>;
#size-cells = <1>;
reg = <
- 0x70000000 0x10000000 /* NFC Command Registers */
+ 0x70000000 0x08000000 /* NFC Command Registers */
0xffffc000 0x00000070 /* NFC HSMC regs */
0x00200000 0x00100000 /* NFC SRAM banks */
>;
rxd3-skew-ps = <400>;
};
};
-
- pmc: pmc@fffffc00 {
- main: mainck {
- clock-frequency = <12000000>;
- };
- };
};
nand0: nand@60000000 {
serial0 = &usart3;
serial1 = &usart4;
serial2 = &usart2;
+ serial3 = &usart0;
+ serial4 = &usart1;
+ serial5 = &uart0;
+ serial6 = &uart1;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
- <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ehci_clk", "uhpck";
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
#address-cells = <1>;
#size-cells = <1>;
reg = <
- 0x90000000 0x10000000 /* NFC Command Registers */
+ 0x90000000 0x08000000 /* NFC Command Registers */
0xfc05c000 0x00000070 /* NFC HSMC regs */
0x00100000 0x00100000 /* NFC SRAM banks */
>;
clock-names = "mci_clk";
};
+ uart0: serial@f8004000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8004000 0x100>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(22))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(23))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
ssc0: ssc@f8008000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf8008000 0x4000>;
reg = <0xf8028000 0x60>;
};
+ usart0: serial@f802c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf802c000 0x100>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(36))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(37))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart1: serial@f8030000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8030000 0x100>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(38))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(39))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
mmc1: mmc@fc000000 {
compatible = "atmel,hsmci";
reg = <0xfc000000 0x600>;
clock-names = "mci_clk";
};
+ uart1: serial@fc004000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfc004000 0x100>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(24))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(25))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
usart2: serial@fc008000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfc008000 0x100>;
status = "disabled";
};
+ spi1: spi@fc018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfc018000 0x100>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(12))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(13))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
+ spi2: spi@fc01c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfc01c000 0x100>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(14))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(15))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ clocks = <&spi2_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
tcb1: timer@fc020000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xfc020000 0x100>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
- ranges = <0xfc06a000 0xfc06a000 0x4000>;
+ ranges = <0xfc068000 0xfc068000 0x100
+ 0xfc06a000 0xfc06a000 0x4000>;
/* WARNING: revisit as pin spec has changed */
atmel,mux-mask = <
/* A B C */
};
};
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MISO */
+ AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MOSI */
+ AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_SPCK */
+ >;
+ };
+ };
+
+ spi2 {
+ pinctrl_spi2: spi2-0 {
+ atmel,pins =
+ <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MISO conflicts with RTS0 */
+ AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MOSI conflicts with TXD0 */
+ AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_SPCK conflicts with RTS1 */
+ >;
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ };
+
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
label = "SW1";
+ gpio-key,wakeup;
};
};
status = "disabled";
};
- irqpin0: irqpin@e6900000 {
+ irqpin0: interrupt-controller@e6900000 {
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
control-parent;
};
- irqpin1: irqpin@e6900004 {
+ irqpin1: interrupt-controller@e6900004 {
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
control-parent;
};
- irqpin2: irqpin@e6900008 {
+ irqpin2: interrupt-controller@e6900008 {
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
control-parent;
};
- irqpin3: irqpin@e690000c {
+ irqpin3: interrupt-controller@e690000c {
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
status = "disabled";
};
- scifb8: serial@e6c30000 {
+ scifb: serial@e6c30000 {
compatible = "renesas,scifb-sh73a0", "renesas,scifb";
reg = <0xe6c30000 0x100>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clk-phase = <0 135>;
};
+ sdmmc_clk_divided: sdmmc_clk_divided {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&sdmmc_clk>;
+ clk-gate = <0xa0 8>;
+ fixed-divider = <4>;
+ };
+
nand_x_clk: nand_x_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
reset-names = "stmmaceth";
snps,multicast-filter-bins = <256>;
snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <4096>;
status = "disabled";
};
reset-names = "stmmaceth";
snps,multicast-filter-bins = <256>;
snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <4096>;
status = "disabled";
};
fifo-depth = <0x400>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
clock-names = "biu", "ciu";
};
status = "disabled";
};
+ scu: snoop-control-unit@fffec000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xfffec000 0x100>;
+ };
+
spi1: spi@fff01000 {
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
- aliases {
- ethernet0 = &gmac0;
- ethernet1 = &gmac1;
- ethernet2 = &gmac2;
- serial0 = &uart0;
- serial1 = &uart1;
- timer0 = &timer0;
- timer1 = &timer1;
- timer2 = &timer2;
- timer3 = &timer3;
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
+ cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ cb_intosc_ls_clk: cb_intosc_ls_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ f2s_free_clk: f2s_free_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
osc1: osc1 {
#clock-cells = <0>;
compatible = "fixed-clock";
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
- compatible = "altr,socfpga-pll-clock";
- clocks = <&osc1>;
+ compatible = "altr,socfpga-a10-pll-clock";
+ clocks = <&osc1>, <&cb_intosc_ls_clk>,
+ <&f2s_free_clk>;
+ reg = <0x40>;
+
+ main_mpu_base_clk: main_mpu_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0x140 0 11>;
+ };
+
+ main_noc_base_clk: main_noc_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0x144 0 11>;
+ };
+
+ main_emaca_clk: main_emaca_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x68>;
+ };
+
+ main_emacb_clk: main_emacb_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x6C>;
+ };
+
+ main_emac_ptp_clk: main_emac_ptp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x70>;
+ };
+
+ main_gpio_db_clk: main_gpio_db_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x74>;
+ };
+
+ main_sdmmc_clk: main_sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk"
+;
+ clocks = <&main_pll>;
+ reg = <0x78>;
+ };
+
+ main_s2f_usr0_clk: main_s2f_usr0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x7C>;
+ };
+
+ main_s2f_usr1_clk: main_s2f_usr1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x80>;
+ };
+
+ main_hmc_pll_ref_clk: main_hmc_pll_ref_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x84>;
+ };
+
+ main_periph_ref_clk: main_periph_ref_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x9C>;
+ };
};
periph_pll: periph_pll {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
- compatible = "altr,socfpga-pll-clock";
- clocks = <&osc1>;
+ compatible = "altr,socfpga-a10-pll-clock";
+ clocks = <&osc1>, <&cb_intosc_ls_clk>,
+ <&f2s_free_clk>, <&main_periph_ref_clk>;
+ reg = <0xC0>;
+
+ peri_mpu_base_clk: peri_mpu_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ div-reg = <0x140 16 11>;
+ };
+
+ peri_noc_base_clk: peri_noc_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ div-reg = <0x144 16 11>;
+ };
+
+ peri_emaca_clk: peri_emaca_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xE8>;
+ };
+
+ peri_emacb_clk: peri_emacb_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xEC>;
+ };
+
+ peri_emac_ptp_clk: peri_emac_ptp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF0>;
+ };
+
+ peri_gpio_db_clk: peri_gpio_db_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF4>;
+ };
+
+ peri_sdmmc_clk: peri_sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF8>;
+ };
+
+ peri_s2f_usr0_clk: peri_s2f_usr0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xFC>;
+ };
+
+ peri_s2f_usr1_clk: peri_s2f_usr1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x100>;
+ };
+
+ peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x104>;
+ };
+ };
+
+ mpu_free_clk: mpu_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x60>;
+ };
+
+ noc_free_clk: noc_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x64>;
+ };
+
+ s2f_user1_free_clk: s2f_user1_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x104>;
+ };
+
+ sdmmc_free_clk: sdmmc_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ fixed-divider = <4>;
+ reg = <0xF8>;
+ };
+
+ l4_sys_free_clk: l4_sys_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&noc_free_clk>;
+ fixed-divider = <4>;
+ };
+
+ l4_main_clk: l4_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 0 2>;
+ clk-gate = <0x48 1>;
+ };
+
+ l4_mp_clk: l4_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 8 2>;
+ clk-gate = <0x48 2>;
+ };
+
+ l4_sp_clk: l4_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 16 2>;
+ clk-gate = <0x48 3>;
+ };
+
+ mpu_periph_clk: mpu_periph_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&mpu_free_clk>;
+ fixed-divider = <4>;
+ clk-gate = <0x48 0>;
+ };
+
+ sdmmc_clk: sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&sdmmc_free_clk>;
+ clk-gate = <0xC8 5>;
+ };
+
+ qspi_clk: qspi_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_main_clk>;
+ clk-gate = <0xC8 11>;
+ };
+
+ nand_clk: nand_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_mp_clk>;
+ clk-gate = <0xC8 10>;
+ };
+
+ spi_m_clk: spi_m_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_main_clk>;
+ clk-gate = <0xC8 9>;
+ };
+
+ usb_clk: usb_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_mp_clk>;
+ clk-gate = <0xC8 8>;
+ };
+
+ s2f_usr1_clk: s2f_usr1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&peri_s2f_usr1_clk>;
+ clk-gate = <0xC8 6>;
};
};
};
interrupt-names = "macirq";
/* Filled in by bootloader */
mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
status = "disabled";
};
interrupt-names = "macirq";
/* Filled in by bootloader */
mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
status = "disabled";
};
interrupt-names = "macirq";
/* Filled in by bootloader */
mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
status = "disabled";
};
reg = <0xff808000 0x1000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
fifo-depth = <0x400>;
+ clocks = <&l4_mp_clk>, <&sdmmc_free_clk>;
+ clock-names = "biu", "ciu";
+ status = "disabled";
};
ocram: sram@ffe00000 {
sysmgr: sysmgr@ffd06000 {
compatible = "altr,sys-mgr", "syscon";
reg = <0xffd06000 0x300>;
+ cpu1-start-addr = <0xffd06230>;
};
/* Local timer */
compatible = "arm,cortex-a9-twd-timer";
reg = <0xffffc600 0x100>;
interrupts = <1 13 0xf04>;
+ clocks = <&mpu_periph_clk>;
};
timer0: timer0@ffc02700 {
compatible = "snps,dw-apb-timer";
interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffc02700 0x100>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
};
timer1: timer1@ffc02800 {
compatible = "snps,dw-apb-timer";
interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffc02800 0x100>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
};
timer2: timer2@ffd00000 {
compatible = "snps,dw-apb-timer";
interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd00000 0x100>;
+ clocks = <&l4_sys_free_clk>;
+ clock-names = "timer";
};
timer3: timer3@ffd00100 {
compatible = "snps,dw-apb-timer";
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd01000 0x100>;
+ clocks = <&l4_sys_free_clk>;
+ clock-names = "timer";
};
uart0: serial0@ffc02000 {
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
uart1: serial1@ffc02100 {
interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
+ status = "disabled";
};
usbphy0: usbphy@0 {
compatible = "snps,dwc2";
reg = <0xffb00000 0xffff>;
interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_clk>;
+ clock-names = "otg";
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
compatible = "snps,dw-wdt";
reg = <0xffd00200 0x100>;
interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sys_free_clk>;
status = "disabled";
};
compatible = "snps,dw-wdt";
reg = <0xffd00300 0x100>;
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sys_free_clk>;
status = "disabled";
};
};
+++ /dev/null
-/*
- * Copyright (C) 2014 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-#include "socfpga_arria10.dtsi"
-
-/ {
- model = "Altera SOCFPGA Arria 10";
- compatible = "altr,socfpga-arria10", "altr,socfpga";
-
- chosen {
- bootargs = "console=ttyS0,115200 rootwait";
- };
-
- memory {
- name = "memory";
- device_type = "memory";
- reg = <0x0 0x40000000>; /* 1GB */
- };
-
- soc {
- clkmgr@ffd04000 {
- clocks {
- osc1 {
- clock-frequency = <25000000>;
- };
- };
- };
-
- serial0@ffc02000 {
- status = "okay";
- };
- };
-};
--- /dev/null
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "socfpga_arria10.dtsi"
+
+/ {
+ model = "Altera SOCFPGA Arria 10";
+ compatible = "altr,socfpga-arria10", "altr,socfpga";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rootwait";
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ soc {
+ clkmgr@ffd04000 {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&mmc {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ bus-width = <4>;
+};
&usb1 {
status = "okay";
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&i2c1{
+ status = "okay";
+
+ accel1: accel1@53{
+ compatible = "adxl34x";
+ reg = <0x53>;
+
+ interrupt-parent = < &portc >;
+ interrupts = <3 2>;
+ };
+};
interrupt-parent = <&intc>;
ranges;
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+ };
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ ptm@801ae000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x801ae000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ cpu = <&CPU0>;
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
+ };
+ };
+
+ ptm@801af000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x801af000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ cpu = <&CPU1>;
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
+ };
+ };
+
+ funnel@801a6000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x801a6000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel output ports */
+ port@0 {
+ reg = <0>;
+ funnel_out_port: endpoint {
+ remote-endpoint =
+ <&replicator_in_port0>;
+ };
+ };
+
+ /* funnel input ports */
+ port@1 {
+ reg = <0>;
+ funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&ptm0_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&ptm1_out_port>;
+ };
+ };
+ };
+ };
+
+ replicator {
+ compatible = "arm,coresight-replicator";
+ clocks = <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "atclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etb_in_port>;
+ };
+ };
+
+ /* replicator input port */
+ port@2 {
+ reg = <0>;
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out_port>;
+ };
+ };
+ };
+ };
+
+ tpiu@80190000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x80190000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ port {
+ tpiu_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+
+ etb@801a4000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0x801a4000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ port {
+ etb_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
intc: interrupt-controller@a0411000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
<0xa0410100 0x100>;
};
+ scu@a04100000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xa0410000 0x100>;
+ };
+
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xa0412000 0x1000>;
clocks = <&smp_twd_clk>;
};
+ watchdog@a0410620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0xa0410620 0x20>;
+ interrupts = <1 14 0x304>;
+ clocks = <&smp_twd_clk>;
+ };
+
rtc@80154000 {
compatible = "arm,rtc-pl031", "arm,primecell";
reg = <0x80154000 0x1000>;
status = "disabled";
};
- vmmci: regulator-gpio {
- compatible = "regulator-gpio";
-
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2900000>;
- regulator-name = "mmci-reg";
- regulator-type = "voltage";
-
- startup-delay-us = <100>;
- enable-active-high;
-
- states = <1800000 0x1
- 2900000 0x0>;
-
- status = "disabled";
- };
-
mcde@a0350000 {
compatible = "stericsson,mcde";
reg = <0xa0350000 0x1000>, /* MCDE */
};
};
+ /* Sensors mounted on this board variant */
+ i2c@80128000 {
+ lis331dl@1c {
+ /* Accelerometer */
+ compatible = "st,lis331dl-accel";
+ st,drdy-int-pin = <1>;
+ reg = <0x1c>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_stuib_mode>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+ <19 IRQ_TYPE_EDGE_RISING>;
+ };
+ ak8974@0f {
+ /* Magnetometer */
+ compatible = "asahi-kasei,ak8974";
+ reg = <0x0f>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&magneto_stuib_mode>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
i2c@80110000 {
bu21013_tp@5c {
compatible = "rohm,bu21013_tp";
};
};
};
+ accelerometer {
+ accel_stuib_mode: accel_stuib {
+ /* Accelerometer interrupt lines 1 & 2 */
+ stuib_cfg {
+ pins = "GPIO82_C1", "GPIO83_D3";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ magnetometer {
+ magneto_stuib_mode: magneto_stuib {
+ /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+ stuib_cfg1 {
+ pins = "GPIO31_V3";
+ ste,config = <&gpio_in_pu>;
+ };
+ stuib_cfg2 {
+ pins = "GPIO32_V2";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
};
};
};
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&accel_tvk_mode>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+ <19 IRQ_TYPE_EDGE_RISING>;
};
- lsm303dlm@1e {
+ lsm303dlh@1e {
/* Magnetometer */
- compatible = "st,lsm303dlm-magn";
+ compatible = "st,lsm303dlh-magn";
reg = <0x1e>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-1 = <&i2c3_sleep_mode>;
};
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+ enable-active-high;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
+ };
+
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
};
vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
gpios = <&gpio7 4 0x4>;
enable-gpio = <&gpio6 25 0x4>;
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+ enable-active-high;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
};
// External Micro SD slot
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&accel_snowball_mode>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
+ <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
};
- lsm303dlm@1e {
+ lsm303dlh@1e {
/* Magnetometer */
- compatible = "st,lsm303dlm-magn";
+ compatible = "st,lsm303dlh-magn";
reg = <0x1e>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&magneto_snowball_mode>;
+ gpios = <&gpio5 5 0x4>; /* DRDY line */
};
l3g4200d@68 {
/* Gyroscope */
reg = <0x68>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyro_snowball_mode>;
+ gpios = <&gpio5 6 0x4>; /* DRDY line */
+ interrupt-parent = <&gpio5>;
+ interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
};
lsp001wm@5c {
/* Barometer/pressure sensor */
};
};
};
+ gyro {
+ gyro_snowball_mode: gyro_snowball {
+ snowball_cfg1 {
+ pins =
+ "GPIO166_A22", /* DRDY */
+ "GPIO169_D22"; /* INT */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
magnetometer {
magneto_snowball_mode: magneto_snowball {
snowball_cfg1 {
* published by the Free Software Foundation.
*/
/dts-v1/;
-#include "stihxxx-b2120.dtsi"
#include "stih407.dtsi"
+#include "stihxxx-b2120.dtsi"
/ {
model = "STiH407 B2120";
compatible = "st,stih407-b2120", "st,stih407";
* publishhed by the Free Software Foundation.
*/
#include "stih407-pinctrl.dtsi"
+#include <dt-bindings/mfd/st-lpc.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset-controller/stih407-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
cache-level = <2>;
};
+ arm-pmu {
+ interrupt-parent = <&intc>;
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
+ restart {
+ compatible = "st,stih407-restart";
+ st,syscfg = <&syscfg_sbc_reg>;
+ status = "okay";
+ };
+
powerdown: powerdown-controller {
compatible = "st,stih407-powerdown";
#reset-cells = <1>;
reg = <0x94b5100 0x1000>;
};
+ irq-syscfg {
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_core>;
+ st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+ <ST_IRQ_SYSCFG_PMU_1>;
+ st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+ <ST_IRQ_SYSCFG_DISABLED>;
+ };
+
serial@9830000 {
compatible = "st,asc";
reg = <0x9830000 0x2c>;
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0x100 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY0_RESET>;
+ <&picophyreset STIH407_PICOPHY2_RESET>;
reset-names = "global", "port";
};
resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
};
};
+
+ spi@9840000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9840000 0x110>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi@9841000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9841000 0x110>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9842000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9842000 0x110>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9843000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9843000 0x110>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9844000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9844000 0x110>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ /* SBC SSC */
+ spi@9540000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9540000 0x110>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9541000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9541000 0x110>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9542000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9542000 0x110>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ mmc0: sdhci@09060000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ status = "disabled";
+ reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+ reg-names = "mmc", "top-mmc-delay";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+ bus-width = <8>;
+ non-removable;
+ };
+
+ mmc1: sdhci@09080000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ status = "disabled";
+ reg = <0x09080000 0x7ff>;
+ reg-names = "mmc";
+ interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1>;
+ clock-names = "mmc";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+ resets = <&softreset STIH407_MMC1_SOFTRESET>;
+ bus-width = <4>;
+ };
+
+ /* Watchdog and Real-Time Clock */
+ lpc@8787000 {
+ compatible = "st,stih407-lpc";
+ reg = <0x8787000 0x1000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+ timeout-sec = <120>;
+ st,syscfg = <&syscfg_core>;
+ st,lpc-mode = <ST_LPC_MODE_WDT>;
+ };
+
+ lpc@8788000 {
+ compatible = "st,stih407-lpc";
+ reg = <0x8788000 0x1000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
+ st,lpc-mode = <ST_LPC_MODE_RTC>;
+ };
+
+ sata0: sata@9b20000 {
+ compatible = "st,ahci";
+ reg = <0x9b20000 0x1000>;
+
+ interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+ interrupt-names = "hostc";
+
+ phys = <&phy_port0 PHY_TYPE_SATA>;
+ phy-names = "ahci_phy";
+
+ resets = <&powerdown STIH407_SATA0_POWERDOWN>,
+ <&softreset STIH407_SATA0_SOFTRESET>,
+ <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+ reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
+
+ clock-names = "ahci_clk";
+ clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+ status = "disabled";
+ };
+
+ sata1: sata@9b28000 {
+ compatible = "st,ahci";
+ reg = <0x9b28000 0x1000>;
+
+ interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
+ interrupt-names = "hostc";
+
+ phys = <&phy_port1 PHY_TYPE_SATA>;
+ phy-names = "ahci_phy";
+
+ resets = <&powerdown STIH407_SATA1_POWERDOWN>,
+ <&softreset STIH407_SATA1_SOFTRESET>,
+ <&softreset STIH407_SATA1_PWR_SOFTRESET>;
+ reset-names = "pwr-dwn",
+ "sw-rst",
+ "pwr-rst";
+
+ clock-names = "ahci_clk";
+ clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+ status = "disabled";
+ };
+
+ st_dwc3: dwc3@8f94000 {
+ compatible = "st,stih407-dwc3";
+ reg = <0x08f94000 0x1000>, <0x110 0x4>;
+ reg-names = "reg-glue", "syscfg-reg";
+ st,syscfg = <&syscfg_core>;
+ resets = <&powerdown STIH407_USB3_POWERDOWN>,
+ <&softreset STIH407_MIPHY2_SOFTRESET>;
+ reset-names = "powerdown", "softreset";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
+ ranges;
+
+ status = "disabled";
+
+ dwc3: dwc3@9900000 {
+ compatible = "snps,dwc3";
+ reg = <0x09900000 0x100000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+ dr_mode = "host";
+ phy-names = "usb2-phy", "usb3-phy";
+ phys = <&usb2_picophy0>,
+ <&phy_port2 PHY_TYPE_USB3>;
+ };
+ };
};
};
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO5";
+ st,retime-pin-mask = <0x3f>;
};
rc {
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO35";
+ st,retime-pin-mask = <0x7f>;
};
i2c4 {
};
};
};
+
+ /* COMMS PWM Module */
+ pwm0: pwm@9810000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0x9810000 0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@9510000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0x9510000 0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ &pinctrl_pwm1_chan1_default
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <4>;
+ };
};
};
aliases {
ttyAS0 = &sbc_serial0;
};
+
+ soc {
+
+ mmc0: sdhci@09060000 {
+ max-frequency = <200000000>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ };
+ };
};
sata0: sata@fe380000{
status = "okay";
};
+
+ /* SAS PWM Module */
+ pwm0: pwm@fed10000 {
+ status = "okay";
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@fe510000 {
+ status = "okay";
+ };
};
};
};
};
};
+
+ pwm1 {
+ pinctrl_pwm1_chan0_default: pwm1-0-default {
+ st,pins {
+ pwm-out = <&pio3 0 ALT1 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan1_default: pwm1-1-default {
+ st,pins {
+ pwm-out = <&pio4 4 ALT1 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan2_default: pwm1-2-default {
+ st,pins {
+ pwm-out = <&pio4 6 ALT3 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan3_default: pwm1-3-default {
+ st,pins {
+ pwm-out = <&pio4 7 ALT3 OUT>;
+ };
+ };
+ };
};
pin-controller-front {
st,bank-name = "PIO31";
};
+ pwm0 {
+ pinctrl_pwm0_chan0_default: pwm0-0-default {
+ st,pins {
+ pwm-out = <&pio9 7 ALT2 OUT>;
+ };
+ };
+ };
+
serial2-oe {
pinctrl_serial2_oe: serial2-1 {
st,pins {
};
};
};
+
+ pwm0 {
+ pinctrl_pwm0_chan1_default: pwm0-1-default {
+ st,pins {
+ pwm-out = <&pio13 2 ALT2 OUT>;
+ };
+ };
+ pinctrl_pwm0_chan2_default: pwm0-2-default {
+ st,pins {
+ pwm-out = <&pio15 2 ALT4 OUT>;
+ };
+ };
+ pinctrl_pwm0_chan3_default: pwm0-3-default {
+ st,pins {
+ pwm-out = <&pio17 4 ALT1 OUT>;
+ };
+ };
+ };
+
};
pin-controller-fvdp-fe {
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/stih416-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
/ {
L2: cache-controller {
compatible = "arm,pl310-cache";
cache-level = <2>;
};
+ arm-pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
+ restart {
+ compatible = "st,stih416-restart";
+ st,syscfg = <&syscfg_sbc>;
+ status = "okay";
+ };
+
powerdown: powerdown-controller {
#reset-cells = <1>;
compatible = "st,stih416-powerdown";
reg = <0xfe4b5100 0x8>;
};
+ irq-syscfg {
+ compatible = "st,stih416-irq-syscfg";
+ st,syscfg = <&syscfg_cpu>;
+ st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+ <ST_IRQ_SYSCFG_PMU_1>;
+ st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+ <ST_IRQ_SYSCFG_DISABLED>;
+ };
+
serial2: serial@fed32000{
compatible = "st,asc";
status = "disabled";
interrupts = <0 210 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
- clocks = <&clk_sysin>;
+ clocks = <&clk_sysin>;
};
i2c@fed40000 {
<&softreset STIH416_USB3_SOFTRESET>;
reset-names = "power", "softreset";
};
+
+ /* SAS PWM Module */
+ pwm0: pwm@fed10000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0xfed10000 0x68>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default
+ &pinctrl_pwm0_chan1_default
+ &pinctrl_pwm0_chan2_default
+ &pinctrl_pwm0_chan3_default>;
+
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <4>;
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@fe510000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0xfe510000 0x68>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ /*
+ * Shared with SBC_OBS_NOTRST. Don't
+ * enable unless you really know what
+ * you're doing.
+ *
+ * &pinctrl_pwm1_chan1_default
+ */
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <3>;
+ };
};
};
st,i2c-min-scl-pulse-width-us = <0>;
st,i2c-min-sda-pulse-width-us = <5>;
};
+
+ mmc1: sdhci@09080000 {
+ status = "okay";
+ };
+
+ mmc0: sdhci@09060000 {
+ status = "okay";
+ max-frequency = <200000000>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ };
+
+ miphy28lp_phy: miphy28lp@9b22000 {
+
+ phy_port0: port@9b22000 {
+ st,osc-rdy;
+ };
+
+ phy_port1: port@9b2a000 {
+ st,osc-force-ext;
+ };
+ };
+
+ st_dwc3: dwc3@8f94000 {
+ status = "okay";
+ };
};
};
status = "okay";
};
+ mmc0: sdhci@09060000 {
+ status = "okay";
+ };
+
+ mmc1: sdhci@09080000 {
+ status = "okay";
+ };
+
/* SSC11 to HDMI */
hdmiddc: i2c@9541000 {
status = "okay";
st,osc-force-ext;
};
};
+
+ st_dwc3: dwc3@8f94000 {
+ status = "okay";
+ };
+
};
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Mele A1000";
compatible = "mele,a1000", "allwinner,sun4i-a10";
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- phy-supply = <®_emac_3v3>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- emac_power_pin_a1000: emac_power_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_a1000: led_pins@0 {
- allwinner,pins = "PH10", "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
+ aliases {
+ serial0 = &uart0;
+ };
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
enable-active-high;
gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
};
+};
+
+&ahci {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
};
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ phy-supply = <®_emac_3v3>;
+ status = "okay";
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ emac_power_pin_a1000: emac_power_pin@0 {
+ allwinner,pins = "PH15";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_a1000: led_pins@0 {
+ allwinner,pins = "PH10", "PH20";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "BA10 tvbox";
compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- usb2_vbus_pin_a: usb2_vbus_pin@0 {
- allwinner,pins = "PH12";
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ aliases {
+ serial0 = &uart0;
};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+ chosen {
+ stdout-path = "serial0:115200n8";
};
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- reg_usb2_vbus: usb2-vbus {
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ usb2_vbus_pin_a: usb2_vbus_pin@0 {
+ allwinner,pins = "PH12";
+ };
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Chuwi V7 CW0825";
compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&ehci1 {
};
};
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@800 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <800000>;
+ };
+
+ button@1000 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <1000000>;
+ };
+
+ button@1200 {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ channel = <0>;
+ voltage = <1200000>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Cubietech Cubieboard";
compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- led_pins_cubieboard: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
+ aliases {
+ serial0 = &uart0;
+ };
- spi0: spi@01c05000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
linux,default-trigger = "heartbeat";
};
};
+};
- reg_ahci_5v: ahci-5v {
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
};
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
};
-#include "axp209.dtsi"
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
-&cpu0 {
- cpu-supply = <®_dcdc2>;
+&ohci0 {
+ status = "okay";
};
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ led_pins_cubieboard: led_pins@0 {
+ allwinner,pins = "PH20", "PH21";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_ahci_5v {
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>,
+ <&spi0_cs0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Gemei G9 Tablet";
+ compatible = "gemei,g9", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+/*
+ * TODO:
+ * 2x cameras via CSI
+ * bma250 IRQs
+ * AXP battery management
+ * NAND
+ * OTG
+ * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
+ */
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+
+ /*
+ * TODO: interrupt pins:
+ * int1 - PH00
+ * int2 - PI10
+ */
+ };
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+
+ status = "okay";
+
+ button@158 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <158730>;
+ };
+
+ button@349 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <349206>;
+ };
+
+ button@1142 {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ channel = <0>;
+ voltage = <1142856>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
+ cd-inverted;
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Miniand Hackberry";
compatible = "miniand,hackberry", "allwinner,sun4i-a10";
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy0>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- phy-supply = <®_emac_3v3>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pio: pinctrl@01c20800 {
- pinctrl-names = "default";
- pinctrl-0 = <&hackberry_hogs>;
-
- hackberry_hogs: hogs@0 {
- allwinner,pins = "PH19";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
};
reg_emac_3v3: emac-3v3 {
enable-active-high;
gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
};
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy0>;
+ status = "okay";
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ phy-supply = <®_emac_3v3>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
};
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- pinctrl-0 = <&usb2_vbus_pin_hackberry>;
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
- status = "okay";
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hackberry_hogs>;
+
+ hackberry_hogs: hogs@0 {
+ allwinner,pins = "PH19";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
+ allwinner,pins = "PH12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ pinctrl-0 = <&usb2_vbus_pin_hackberry>;
+ gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
/ {
model = "Hyundai A7HD";
compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&ehci1 {
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial0 = &uart0;
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
};
};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Gábor Nyers
+ *
+ * Gábor Nyers <gabor.nyers@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Jesurun Q5";
+ compatible = "jesurun,q5", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_q5>;
+
+ green {
+ label = "q5:green:usr";
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
+ };
+
+ };
+
+ reg_emac_3v3: emac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_power_pin_q5>;
+ regulator-name = "emac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+ };
+};
+
+&ahci {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ phy-supply = <®_emac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ emac_power_pin_q5: emac_power_pin@0 {
+ allwinner,pins = "PH19";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_q5: led_pins@0 {
+ allwinner,pins = "PH20";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "HAOYU Electronics Marsboard A10";
compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
&spi0 {
pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>;
+ pinctrl-0 = <&spi0_pins_a>,
+ <&spi0_cs0_pins_a>;
status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "PineRiver Mini X-Plus";
compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- ir0_pins_a: ir0@0 {
- /* The ir receiver is not always populated */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ aliases {
+ serial0 = &uart0;
};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+ chosen {
+ stdout-path = "serial0:115200n8";
};
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
};
};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&ir0_rx_pins_a {
+ /* The ir receiver is not always populated */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
/ {
model = "MK802";
compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&ehci0 {
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
/ {
model = "MK802ii";
compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&ehci0 {
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Olimex A10-OLinuXino-LIME";
compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
- cpus {
- cpu0: cpu@0 {
- /*
- * The A10-Lime is known to be unstable
- * when running at 1008 MHz
- */
- operating-points = <
- /* kHz uV */
- 912000 1350000
- 864000 1300000
- 624000 1250000
- >;
- cooling-max-level = <2>;
- };
+ aliases {
+ serial0 = &uart0;
};
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- mdio@01c0b080 {
- status = "okay";
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxinolime>;
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
+ green {
+ label = "a10-olinuxino-lime:green:usr";
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
+};
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
+&cpu0 {
+ /*
+ * The A10-Lime is known to be unstable when running at 1008 MHz
+ */
+ operating-points = <
+ /* kHz uV */
+ 912000 1350000
+ 864000 1300000
+ 624000 1250000
+ >;
+ cooling-max-level = <2>;
+};
- ehci0: usb@01c14000 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- ohci0: usb@01c14400 {
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
- pinctrl@01c20800 {
- ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+&mdio {
+ status = "okay";
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
- };
+&ohci0 {
+ status = "okay";
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxinolime>;
+&ohci1 {
+ status = "okay";
+};
- green {
- label = "a10-olinuxino-lime:green:usr";
- gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
+&pio {
+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+ allwinner,pins = "PC3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_ahci_5v: ahci-5v {
- pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ led_pins_olinuxinolime: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "LinkSprite pcDuino";
compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- pinctrl@01c20800 {
- led_pins_pcduino: led_pins@0 {
- allwinner,pins = "PH15", "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- key_pins_pcduino: key_pins@0 {
- allwinner,pins = "PH17", "PH18", "PH19";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- mdio@01c0b080 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
+ aliases {
+ serial0 = &uart0;
+ };
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
};
};
+};
+
+&ehci0 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
};
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+&mdio {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ led_pins_pcduino: led_pins@0 {
+ allwinner,pins = "PH15", "PH16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ key_pins_pcduino: key_pins@0 {
+ allwinner,pins = "PH17", "PH18", "PH19";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* Copyright 2012 Stefan Roese
* Stefan Roese <sr@denx.de>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
ranges;
framebuffer@0 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
};
framebuffer@1 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>, <&ahb_gates 46>;
clocks = <&cpu>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
- /* kHz uV */
+ /* kHz uV */
1008000 1400000
- 912000 1350000
- 864000 1300000
- 624000 1250000
+ 912000 1350000
+ 864000 1300000
+ 624000 1250000
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
usb_clk: clk@01c200cc {
#clock-cells = <1>;
- #reset-cells = <1>;
+ #reset-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+ clock-output-names = "usb_ohci0", "usb_ohci1",
+ "usb_phy";
};
spi3_clk: clk@01c200d4 {
};
};
+ /*
+ * Note we use the address where the mmio registers start, not where
+ * the SRAM blocks start, this cannot be changed because that would be
+ * a devicetree ABI change.
+ */
soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ sram@00000000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00000000 0x4000>;
+ allwinner,sram-name = "A1";
+ };
+
+ sram@00004000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00004000 0x4000>;
+ allwinner,sram-name = "A2";
+ };
+
+ sram@00008000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00008000 0x4000>;
+ allwinner,sram-name = "A3-A4";
+ };
+
+ sram@00010000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00010000 0x1000>;
+ allwinner,sram-name = "D";
+ };
+
+ sram-controller@01c00000 {
+ compatible = "allwinner,sun4i-a10-sram-controller";
+ reg = <0x01c00000 0x30>;
+ };
+
dma: dma-controller@01c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
"sample";
interrupts = <32>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
"sample";
interrupts = <33>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
"sample";
interrupts = <34>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
"sample";
interrupts = <35>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usbphy: phy@01c13400 {
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- ir0_pins_a: ir0@0 {
- allwinner,pins = "PB3","PB4";
+ ir0_rx_pins_a: ir0@0 {
+ allwinner,pins = "PB4";
allwinner,function = "ir0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- ir1_pins_a: ir1@0 {
- allwinner,pins = "PB22","PB23";
+ ir0_tx_pins_a: ir0@1 {
+ allwinner,pins = "PB3";
+ allwinner,function = "ir0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ir1_rx_pins_a: ir1@0 {
+ allwinner,pins = "PB23";
+ allwinner,function = "ir1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ir1_tx_pins_a: ir1@1 {
+ allwinner,pins = "PB22";
allwinner,function = "ir1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi0_pins_a: spi0@0 {
- allwinner,pins = "PI10", "PI11", "PI12", "PI13";
+ allwinner,pins = "PI11", "PI12", "PI13";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi0_cs0_pins_a: spi0_cs0@0 {
+ allwinner,pins = "PI10";
allwinner,function = "spi0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi1_pins_a: spi1@0 {
- allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+ allwinner,pins = "PI17", "PI18", "PI19";
+ allwinner,function = "spi1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi1_cs0_pins_a: spi1_cs0@0 {
+ allwinner,pins = "PI16";
allwinner,function = "spi1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_a: spi2@0 {
- allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+ allwinner,pins = "PC20", "PC21", "PC22";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_b: spi2@1 {
- allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+ allwinner,pins = "PB15", "PB16", "PB17";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_cs0_pins_a: spi2_cs0@0 {
+ allwinner,pins = "PC19";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_cs0_pins_b: spi2_cs0@1 {
+ allwinner,pins = "PB14";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Auxtek t004 A10s hdmi tv-stick";
+ compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_t004>;
+
+ red {
+ label = "t004-tv-dongle:red:usr";
+ gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+ default-state = "on";
+ };
+ };
+
+ reg_vmmc1: vmmc1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
+ regulator-name = "vmmc1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ vmmc-supply = <®_vmmc1>;
+ bus-width = <4>;
+ non-removable;
+ cap-sdio-irq;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_t004: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
+ allwinner,pins = "PB18";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_t004: led_pins@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb1_vbus_pin_a {
+ allwinner,pins = "PG13";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "MK802-A10s";
compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial2 = &uart3;
};
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- mdio@01c0b080 {
- status = "okay";
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxino>;
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
+ green {
+ label = "a10s-olinuxino-micro:green:usr";
+ gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
+};
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
- cd-inverted;
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- mmc1: mmc@01c10000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
- cd-inverted;
- status = "okay";
- };
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
- ehci0: usb@01c14000 {
- status = "okay";
- };
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
- ohci0: usb@01c14400 {
- status = "okay";
- };
+ at24@50 {
+ compatible = "at,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ read-only;
+ };
+};
- pinctrl@01c20800 {
- mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
- allwinner,pins = "PG13";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PE3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
- allwinner,pins = "PB10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
- lradc: lradc@01c22800 {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@191 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <191274>;
- };
-
- button@392 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <392644>;
- };
-
- button@601 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <601151>;
- };
-
- button@795 {
- label = "Enter";
- linux,code = <KEY_ENTER>;
- channel = <0>;
- voltage = <795090>;
- };
-
- button@987 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <987387>;
- };
- };
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
- uart2: serial@01c28800 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_a>;
- status = "okay";
- };
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
- uart3: serial@01c28c00 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_a>;
- status = "okay";
- };
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
- };
+ button@795 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <795090>;
+ };
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-
- at24@50 {
- compatible = "at,24c16";
- pagesize = <16>;
- reg = <0x50>;
- read-only;
- };
- };
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
+ };
+};
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+&mdio {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxino>;
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+};
- green {
- label = "a10s-olinuxino-micro:green:usr";
- gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
- gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+ allwinner,pins = "PG13";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PE3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
+ allwinner,pins = "PB10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
+ gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+ status = "okay";
};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_a>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "R7 A10s hdmi tv-stick";
compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
- cd-inverted;
- status = "okay";
- };
-
- mmc1: mmc@01c10000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- non-removable;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc0_cd_pin_r7: mmc0_cd_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- led_pins_r7: led_pins@0 {
- allwinner,pins = "PB2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb1_vbus_pin_r7: usb1_vbus_pin@0 {
- allwinner,pins = "PG13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+ aliases {
+ serial0 = &uart0;
+ };
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
default-state = "on";
};
};
+};
+
+&ehci0 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_r7>;
- gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
- status = "okay";
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ led_pins_r7: led_pins@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+ allwinner,pins = "PG13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_r7>;
+ gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
};
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
+#include "sun5i.dtsi"
+
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
ranges;
framebuffer@0 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
};
};
- cpus {
- cpu@0 {
- compatible = "arm,cortex-a8";
- };
- };
-
- memory {
- reg = <0x40000000 0x20000000>;
- };
-
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
- osc24M: clk@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
-
- osc32k: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
-
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
- };
-
- /* dummy is 200M */
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- axi_gates: clk@01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-output-names = "axi_dram";
- };
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
- };
-
ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
- clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
- "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
- "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
- "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
- "ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
- "ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
- "ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
- };
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
+ clock-output-names = "ahb_usbotg", "ahb_ehci",
+ "ahb_ohci", "ahb_ss", "ahb_dma",
+ "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+ "ahb_mmc2", "ahb_nand",
+ "ahb_sdram", "ahb_emac", "ahb_ts",
+ "ahb_spi0", "ahb_spi1", "ahb_spi2",
+ "ahb_gps", "ahb_stimer", "ahb_ve",
+ "ahb_tve", "ahb_lcd", "ahb_csi",
+ "ahb_hdmi", "ahb_de_be",
+ "ahb_de_fe", "ahb_iep",
+ "ahb_mali400";
};
apb0_gates: clk@01c20068 {
compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
- clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
- "apb0_ir", "apb0_keypad";
- };
-
- apb1: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
+ clock-output-names = "apb0_codec", "apb0_iis",
+ "apb0_pio", "apb0_ir",
+ "apb0_keypad";
};
apb1_gates: clk@01c2006c {
"apb1_i2c2", "apb1_uart0", "apb1_uart1",
"apb1_uart2", "apb1_uart3";
};
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_phy";
- };
-
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mbus";
- };
};
soc@01c00000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- dma: dma-controller@01c02000 {
- compatible = "allwinner,sun4i-a10-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <27>;
- clocks = <&ahb_gates 6>;
- #dma-cells = <2>;
- };
-
- spi0: spi@01c05000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c05000 0x1000>;
- interrupts = <10>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 27>,
- <&dma SUN4I_DMA_DEDICATED 26>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@01c06000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c06000 0x1000>;
- interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 9>,
- <&dma SUN4I_DMA_DEDICATED 8>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
#size-cells = <0>;
};
- mmc0: mmc@01c0f000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- interrupts = <32>;
- status = "disabled";
- };
-
- mmc1: mmc@01c10000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- interrupts = <33>;
- status = "disabled";
- };
-
- mmc2: mmc@01c11000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- interrupts = <34>;
- status = "disabled";
- };
-
- usbphy: phy@01c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-phy";
- reg = <0x01c13400 0x10 0x01c14800 0x4>;
- reg-names = "phy_ctrl", "pmu1";
- clocks = <&usb_clk 8>;
- clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>;
- reset-names = "usb0_reset", "usb1_reset";
- status = "disabled";
- };
-
- ehci0: usb@01c14000 {
- compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci";
- reg = <0x01c14000 0x100>;
- interrupts = <39>;
- clocks = <&ahb_gates 1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci0: usb@01c14400 {
- compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci";
- reg = <0x01c14400 0x100>;
- interrupts = <40>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
- interrupts = <12>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 29>,
- <&dma SUN4I_DMA_DEDICATED 28>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- intc: interrupt-controller@01c20400 {
- compatible = "allwinner,sun4i-a10-ic";
- reg = <0x01c20400 0x400>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- pio: pinctrl@01c20800 {
- compatible = "allwinner,sun5i-a10s-pinctrl";
- reg = <0x01c20800 0x400>;
- interrupts = <28>;
- clocks = <&apb0_gates 5>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
- #gpio-cells = <3>;
-
- uart0_pins_a: uart0@0 {
- allwinner,pins = "PB19", "PB20";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- uart2_pins_a: uart2@0 {
- allwinner,pins = "PC18", "PC19";
- allwinner,function = "uart2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- uart3_pins_a: uart3@0 {
- allwinner,pins = "PG9", "PG10";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- emac_pins_a: emac0@0 {
- allwinner,pins = "PA0", "PA1", "PA2",
- "PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA9", "PA10",
- "PA11", "PA12", "PA13", "PA14",
- "PA15", "PA16";
- allwinner,function = "emac";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PB0", "PB1";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PB15", "PB16";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PB17", "PB18";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc1_pins_a: mmc1@0 {
- allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
- allwinner,function = "mmc1";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- timer@01c20c00 {
- compatible = "allwinner,sun4i-a10-timer";
- reg = <0x01c20c00 0x90>;
- interrupts = <22>;
- clocks = <&osc24M>;
- };
-
- wdt: watchdog@01c20c90 {
- compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- };
-
- lradc: lradc@01c22800 {
- compatible = "allwinner,sun4i-a10-lradc-keys";
- reg = <0x01c22800 0x100>;
- interrupts = <31>;
- status = "disabled";
- };
-
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-a10-sid";
- reg = <0x01c23800 0x10>;
- };
-
- rtp: rtp@01c25000 {
- compatible = "allwinner,sun4i-a10-ts";
- reg = <0x01c25000 0x100>;
- interrupts = <29>;
- #thermal-sensor-cells = <0>;
- };
-
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
status = "disabled";
};
- uart1: serial@01c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <2>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
- status = "disabled";
- };
-
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
clocks = <&apb1_gates 18>;
status = "disabled";
};
+ };
+};
- uart3: serial@01c28c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28c00 0x400>;
- interrupts = <4>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
- status = "disabled";
- };
+&pio {
+ compatible = "allwinner,sun5i-a10s-pinctrl";
- i2c0: i2c@01c2ac00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <7>;
- clocks = <&apb1_gates 0>;
- status = "disabled";
- };
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PB19", "PB20";
+ allwinner,function = "uart0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
- i2c1: i2c@01c2b000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <8>;
- clocks = <&apb1_gates 1>;
- status = "disabled";
- };
+ uart2_pins_a: uart2@0 {
+ allwinner,pins = "PC18", "PC19";
+ allwinner,function = "uart2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
- i2c2: i2c@01c2b400 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b400 0x400>;
- interrupts = <9>;
- clocks = <&apb1_gates 2>;
- status = "disabled";
- };
+ uart3_pins_a: uart3@0 {
+ allwinner,pins = "PG9", "PG10";
+ allwinner,function = "uart3";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
- timer@01c60000 {
- compatible = "allwinner,sun5i-a13-hstimer";
- reg = <0x01c60000 0x1000>;
- interrupts = <82>, <83>;
- clocks = <&ahb_gates 28>;
- };
+ emac_pins_a: emac0@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ allwinner,function = "emac";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG3", "PG4", "PG5",
+ "PG6", "PG7", "PG8";
+ allwinner,function = "mmc1";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial0 = &uart1;
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_ldo3>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc0_cd_pin_h702: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
- };
-
- uart1: serial@01c28400 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-
- pcf8563: rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
- };
-
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
};
-#include "axp209.dtsi"
-
&cpu0 {
cpu-supply = <®_dcdc2>;
};
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_h702: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+#include "axp209.dtsi"
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_ldo3>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial0 = &uart1;
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- led_pins_olinuxinom: led_pins@0 {
- allwinner,pins = "PG9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
- allwinner,pins = "PG11";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- uart1: serial@01c28400 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
default-state = "on";
};
};
+};
+
+&ehci0 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
- status = "okay";
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+ led_pins_olinuxinom: led_pins@0 {
+ allwinner,pins = "PG9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
+ allwinner,pins = "PG11";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial0 = &uart1;
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
- cd-inverted;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxino>;
- ehci0: usb@01c14000 {
- status = "okay";
+ power {
+ gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
+};
- ohci0: usb@01c14400 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- pinctrl@01c20800 {
- mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PG9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
- allwinner,pins = "PG11";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- lradc: lradc@01c22800 {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@191 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <191274>;
- };
-
- button@392 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <392644>;
- };
-
- button@601 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <601151>;
- };
-
- button@795 {
- label = "Enter";
- linux,code = <KEY_ENTER>;
- channel = <0>;
- voltage = <795090>;
- };
-
- button@987 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <987387>;
- };
- };
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
- uart1: serial@01c28400 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
- status = "okay";
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxino>;
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
- power {
- gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
+ button@795 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <795090>;
+ };
+
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PG9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
+ allwinner,pins = "PG11";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Utoo P66";
+ compatible = "utoo,p66", "allwinner,sun5i-a13";
+
+ i2c_lcd: i2c@0 {
+ /* The lcd panel i2c interface is hooked up via gpios */
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_lcd_pins>;
+ gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
+ <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
+ i2c-gpio,delay-us = <5>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ icn8318: touchscreen@40 {
+ compatible = "chipone,icn8318";
+ reg = <0x40>;
+ interrupt-parent = <&pio>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_wake_pin_p66>;
+ wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ };
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+
+ mmccard: mmccard@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
+
+&pio {
+ mmc0_cd_pin_p66: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ i2c_lcd_pins: i2c_lcd_pin@0 {
+ allwinner,pins = "PG10", "PG12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ ts_wake_pin_p66: ts_wake_pin@0 {
+ allwinner,pins = "PB3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb0_vbus_pin_a: usb0_vbus_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_ldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+®_usb0_vbus {
+ gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ status = "okay";
+};
+
+&usbphy {
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_ldo3>;
+ status = "okay";
+};
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
-#include <dt-bindings/thermal/thermal.h>
+#include "sun5i.dtsi"
-#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
};
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a8";
- reg = <0x0>;
- clocks = <&cpu>;
- clock-latency = <244144>; /* 8 32k periods */
- operating-points = <
- /* kHz uV */
- 1008000 1400000
- 912000 1350000
- 864000 1300000
- 624000 1200000
- 576000 1200000
- 432000 1200000
- >;
- #cooling-cells = <2>;
- cooling-min-level = <0>;
- cooling-max-level = <5>;
- };
- };
-
thermal-zones {
cpu_thermal {
/* milliseconds */
};
};
- memory {
- reg = <0x40000000 0x20000000>;
- };
-
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
- osc24M: clk@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
-
- osc32k: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
-
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
- };
-
- /* dummy is 200M */
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- axi_gates: clk@01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-output-names = "axi_dram";
- };
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
- };
-
ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a13-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
- clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
- "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
- "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
- "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
- "ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
- "ahb_de_fe", "ahb_iep", "ahb_mali400";
- };
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
+ clock-output-names = "ahb_usbotg", "ahb_ehci",
+ "ahb_ohci", "ahb_ss", "ahb_dma",
+ "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+ "ahb_mmc2", "ahb_nand",
+ "ahb_sdram", "ahb_spi0",
+ "ahb_spi1", "ahb_spi2",
+ "ahb_stimer", "ahb_ve", "ahb_lcd",
+ "ahb_csi", "ahb_de_be",
+ "ahb_de_fe", "ahb_iep",
+ "ahb_mali400";
};
apb0_gates: clk@01c20068 {
compatible = "allwinner,sun5i-a13-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
- clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
- };
-
- apb1: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
+ clock-output-names = "apb0_codec", "apb0_pio",
+ "apb0_ir";
};
apb1_gates: clk@01c2006c {
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_uart1", "apb1_uart3";
};
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_phy";
- };
-
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mbus";
- };
};
+};
- soc@01c00000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- dma: dma-controller@01c02000 {
- compatible = "allwinner,sun4i-a10-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <27>;
- clocks = <&ahb_gates 6>;
- #dma-cells = <2>;
- };
-
- spi0: spi@01c05000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c05000 0x1000>;
- interrupts = <10>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 27>,
- <&dma SUN4I_DMA_DEDICATED 26>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@01c06000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c06000 0x1000>;
- interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 9>,
- <&dma SUN4I_DMA_DEDICATED 8>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc0: mmc@01c0f000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- interrupts = <32>;
- status = "disabled";
- };
-
- mmc2: mmc@01c11000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- interrupts = <34>;
- status = "disabled";
- };
-
- usbphy: phy@01c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-phy";
- reg = <0x01c13400 0x10 0x01c14800 0x4>;
- reg-names = "phy_ctrl", "pmu1";
- clocks = <&usb_clk 8>;
- clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>;
- reset-names = "usb0_reset", "usb1_reset";
- status = "disabled";
- };
-
- ehci0: usb@01c14000 {
- compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
- reg = <0x01c14000 0x100>;
- interrupts = <39>;
- clocks = <&ahb_gates 1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci0: usb@01c14400 {
- compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
- reg = <0x01c14400 0x100>;
- interrupts = <40>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
- interrupts = <12>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 29>,
- <&dma SUN4I_DMA_DEDICATED 28>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- intc: interrupt-controller@01c20400 {
- compatible = "allwinner,sun4i-a10-ic";
- reg = <0x01c20400 0x400>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- pio: pinctrl@01c20800 {
- compatible = "allwinner,sun5i-a13-pinctrl";
- reg = <0x01c20800 0x400>;
- interrupts = <28>;
- clocks = <&apb0_gates 5>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
- #gpio-cells = <3>;
-
- uart1_pins_a: uart1@0 {
- allwinner,pins = "PE10", "PE11";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- uart1_pins_b: uart1@1 {
- allwinner,pins = "PG3", "PG4";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PB0", "PB1";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PB15", "PB16";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PB17", "PB18";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- timer@01c20c00 {
- compatible = "allwinner,sun4i-a10-timer";
- reg = <0x01c20c00 0x90>;
- interrupts = <22>;
- clocks = <&osc24M>;
- };
-
- wdt: watchdog@01c20c90 {
- compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- };
-
- lradc: lradc@01c22800 {
- compatible = "allwinner,sun4i-a10-lradc-keys";
- reg = <0x01c22800 0x100>;
- interrupts = <31>;
- status = "disabled";
- };
-
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-a10-sid";
- reg = <0x01c23800 0x10>;
- };
-
- rtp: rtp@01c25000 {
- compatible = "allwinner,sun4i-a10-ts";
- reg = <0x01c25000 0x100>;
- interrupts = <29>;
- #thermal-sensor-cells = <0>;
- };
-
- uart1: serial@01c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <2>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
- status = "disabled";
- };
-
- uart3: serial@01c28c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28c00 0x400>;
- interrupts = <4>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
- status = "disabled";
- };
-
- i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <7>;
- clocks = <&apb1_gates 0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
+&cpu0 {
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1400000
+ 912000 1350000
+ 864000 1300000
+ 624000 1200000
+ 576000 1200000
+ 432000 1200000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <5>;
+};
- i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <8>;
- clocks = <&apb1_gates 1>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
+&pio {
+ compatible = "allwinner,sun5i-a13-pinctrl";
- i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b400 0x400>;
- interrupts = <9>;
- clocks = <&apb1_gates 2>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ uart1_pins_a: uart1@0 {
+ allwinner,pins = "PE10", "PE11";
+ allwinner,function = "uart1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
- timer@01c60000 {
- compatible = "allwinner,sun5i-a13-hstimer";
- reg = <0x01c60000 0x1000>;
- interrupts = <82>, <83>;
- clocks = <&ahb_gates 28>;
- };
+ uart1_pins_b: uart1@1 {
+ allwinner,pins = "PG3", "PG4";
+ allwinner,function = "uart1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
--- /dev/null
+/*
+ * Copyright 2012-2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a8";
+ reg = <0x0>;
+ clocks = <&cpu>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * This is a dummy clock, to be used as placeholder on
+ * other mux clocks when a specific parent clock is not
+ * yet implemented. It should be dropped when the driver
+ * is complete.
+ */
+ dummy: dummy {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc24M: clk@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-osc-clk";
+ reg = <0x01c20050 0x4>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: clk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ pll1: clk@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll1";
+ };
+
+ pll4: clk@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll1-clk";
+ reg = <0x01c20018 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll4";
+ };
+
+ pll5: clk@01c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+ pll6: clk@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ };
+
+ /* dummy is 200M */
+ cpu: cpu@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-cpu-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+ clock-output-names = "cpu";
+ };
+
+ axi: axi@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-axi-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&cpu>;
+ clock-output-names = "axi";
+ };
+
+ ahb: ahb@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun5i-a13-ahb-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&axi>, <&cpu>, <&pll6 1>;
+ clock-output-names = "ahb";
+ /*
+ * Use PLL6 as parent, instead of CPU/AXI
+ * which has rate changes due to cpufreq
+ */
+ assigned-clocks = <&ahb>;
+ assigned-clock-parents = <&pll6 1>;
+ };
+
+ apb0: apb0@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb0-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&ahb>;
+ clock-output-names = "apb0";
+ };
+
+ apb1: clk@01c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb1-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1";
+ };
+
+ axi_gates: clk@01c2005c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-axi-gates-clk";
+ reg = <0x01c2005c 0x4>;
+ clocks = <&axi>;
+ clock-output-names = "axi_dram";
+ };
+
+ nand_clk: clk@01c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ ms_clk: clk@01c20084 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20084 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ms";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0",
+ "mmc0_output",
+ "mmc0_sample";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc1",
+ "mmc1_output",
+ "mmc1_sample";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc2",
+ "mmc2_output",
+ "mmc2_sample";
+ };
+
+ ts_clk: clk@01c20098 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20098 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ts";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ss";
+ };
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi2";
+ };
+
+ ir0_clk: clk@01c200b0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200b0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir0";
+ };
+
+ usb_clk: clk@01c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun5i-a13-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&pll6 1>;
+ clock-output-names = "usb_ohci0", "usb_phy";
+ };
+
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun5i-a13-mbus-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mbus";
+ };
+ };
+
+ /*
+ * Note we use the address where the mmio registers start, not where
+ * the SRAM blocks start, this cannot be changed because that would be
+ * a devicetree ABI change.
+ */
+ soc@01c00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram@00000000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00000000 0x4000>;
+ allwinner,sram-name = "A1";
+ };
+
+ sram@00004000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00004000 0x4000>;
+ allwinner,sram-name = "A2";
+ };
+
+ sram@00008000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00008000 0x4000>;
+ allwinner,sram-name = "A3-A4";
+ };
+
+ sram@00010000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00010000 0x1000>;
+ allwinner,sram-name = "D";
+ };
+
+ sram-controller@01c00000 {
+ compatible = "allwinner,sun4i-a10-sram-controller";
+ reg = <0x01c00000 0x30>;
+ };
+
+ dma: dma-controller@01c02000 {
+ compatible = "allwinner,sun4i-a10-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <27>;
+ clocks = <&ahb_gates 6>;
+ #dma-cells = <2>;
+ };
+
+ spi0: spi@01c05000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <10>;
+ clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+ <&dma SUN4I_DMA_DEDICATED 26>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@01c06000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <11>;
+ clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+ <&dma SUN4I_DMA_DEDICATED 8>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>,
+ <&mmc0_clk 0>,
+ <&mmc0_clk 1>,
+ <&mmc0_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ interrupts = <32>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>,
+ <&mmc1_clk 0>,
+ <&mmc1_clk 1>,
+ <&mmc1_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ interrupts = <33>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>,
+ <&mmc2_clk 0>,
+ <&mmc2_clk 1>,
+ <&mmc2_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ interrupts = <34>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usbphy: phy@01c13400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun5i-a13-usb-phy";
+ reg = <0x01c13400 0x10 0x01c14800 0x4>;
+ reg-names = "phy_ctrl", "pmu1";
+ clocks = <&usb_clk 8>;
+ clock-names = "usb_phy";
+ resets = <&usb_clk 0>, <&usb_clk 1>;
+ reset-names = "usb0_reset", "usb1_reset";
+ status = "disabled";
+ };
+
+ ehci0: usb@01c14000 {
+ compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+ reg = <0x01c14000 0x100>;
+ interrupts = <39>;
+ clocks = <&ahb_gates 1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@01c14400 {
+ compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+ reg = <0x01c14400 0x100>;
+ interrupts = <40>;
+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+ interrupts = <12>;
+ clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+ <&dma SUN4I_DMA_DEDICATED 28>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ intc: interrupt-controller@01c20400 {
+ compatible = "allwinner,sun4i-a10-ic";
+ reg = <0x01c20400 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ pio: pinctrl@01c20800 {
+ reg = <0x01c20800 0x400>;
+ interrupts = <28>;
+ clocks = <&apb0_gates 5>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
+
+ i2c0_pins_a: i2c0@0 {
+ allwinner,pins = "PB0", "PB1";
+ allwinner,function = "i2c0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ allwinner,pins = "PB15", "PB16";
+ allwinner,function = "i2c1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ allwinner,pins = "PB17", "PB18";
+ allwinner,function = "i2c2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc2_pins_a: mmc2@0 {
+ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12", "PC13",
+ "PC14", "PC15";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+ };
+
+ timer@01c20c00 {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x01c20c00 0x90>;
+ interrupts = <22>;
+ clocks = <&osc24M>;
+ };
+
+ wdt: watchdog@01c20c90 {
+ compatible = "allwinner,sun4i-a10-wdt";
+ reg = <0x01c20c90 0x10>;
+ };
+
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
+ sid: eeprom@01c23800 {
+ compatible = "allwinner,sun4i-a10-sid";
+ reg = <0x01c23800 0x10>;
+ };
+
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun5i-a13-ts";
+ reg = <0x01c25000 0x100>;
+ interrupts = <29>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <2>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 17>;
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 19>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ compatible = "allwinner,sun4i-a10-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <7>;
+ clocks = <&apb1_gates 0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@01c2b000 {
+ compatible = "allwinner,sun4i-a10-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <8>;
+ clocks = <&apb1_gates 1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@01c2b400 {
+ compatible = "allwinner,sun4i-a10-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <9>;
+ clocks = <&apb1_gates 2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ timer@01c60000 {
+ compatible = "allwinner,sun5i-a13-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <82>, <83>;
+ clocks = <&ahb_gates 28>;
+ };
+ };
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Allwinner A31 APP4 EVB1 Evaluation Board";
compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+ aliases {
+ serial0 = &uart0;
+ };
+
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
- soc@01c00000 {
- pio: pinctrl@01c20800 {
- usb1_vbus_pin_a: usb1_vbus_pin@0 {
- allwinner,pins = "PH27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+&ehci0 {
+ status = "okay";
+};
- usbphy: phy@01c19400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
+&pio {
+ usb1_vbus_pin_a: usb1_vbus_pin@0 {
+ allwinner,pins = "PH27";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
- ehci0: usb@01c1a000 {
- status = "okay";
- };
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_a>;
+ gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
- };
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_a>;
- gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "WITS A31 Colombus Evaluation Board";
compatible = "wits,colombus", "allwinner,sun6i-a31";
+ aliases {
+ serial0 = &uart0;
+ };
+
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "fail";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+ cd-inverted;
+ status = "okay";
+};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c19400 {
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci1: usb@01c1b000 {
- status = "okay";
- };
-
- pio: pinctrl@01c20800 {
- mmc0_pins_a: mmc0@0 {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "fail";
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+&mmc0_pins_a {
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&pio {
+ mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
+ allwinner,pins = "PA8";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- reg_usb2_vbus: usb2-vbus {
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_vbus_pin_colombus>;
- gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
+ allwinner,pins = "PH24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_usb2_vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_vbus_pin_colombus>;
+ gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Merrii A31 Hummingbird";
compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+ aliases {
+ serial0 = &uart0;
+ };
+
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
};
};
};
};
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
- vmmc-supply = <®_vcc3v0>;
+ vmmc-supply = <&vcc_3v0>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
cd-inverted;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
+ vmmc-supply = <&vcc_wifi>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
&ohci0 {
status = "okay";
};
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+ wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
+ allwinner,pins = "PG10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&p2wi {
+ status = "okay";
+
+ axp221: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x68>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ dcdc1-supply = <&vcc_3v0>;
+ dcdc5-supply = <&vcc_dram>;
+
+ regulators {
+ x-powers,dcdc-freq = <3000>;
+
+ vcc_3v0: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+ };
+
+ vdd_cpu: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ vdd_gpu: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-gpu";
+ };
+
+ vdd_sys_dll: dcdc4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys-dll";
+ };
+
+ vcc_dram: dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+ };
+
+ vcc_wifi: aldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_wifi";
+ };
+
+ avcc: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+ };
+ };
+ };
};
®_usb1_vbus {
--- /dev/null
+/*
+ * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Mele I7 Quad top set box";
+ compatible = "mele,i7", "allwinner,sun6i-a31";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_i7>;
+
+ blue {
+ label = "i7:blue:usr";
+ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ led_pins_i7: led_pins@0 {
+ allwinner,pins = "PH13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_i7: mmc0_cd_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb1_vbus_pin_i7: usb1_vbus_pin@0 {
+ allwinner,pins = "PC27";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_vbus_pin_i7>;
+ gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Mele M9 / A1000G Quad top set box";
compatible = "mele,m9", "allwinner,sun6i-a31";
+ aliases {
+ serial0 = &uart0;
+ };
+
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
- cd-inverted;
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_m9>;
- usbphy: phy@01c19400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
+ blue {
+ label = "m9:blue:usr";
+ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
};
+ };
+};
- ehci0: usb@01c1a000 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- ehci1: usb@01c1b000 {
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- pio: pinctrl@01c20800 {
- led_pins_m9: led_pins@0 {
- allwinner,pins = "PH13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc0_cd_pin_m9: mmc0_cd_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- usb1_vbus_pin_m9: usb1_vbus_pin@0 {
- allwinner,pins = "PC27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- gmac: ethernet@01c30000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ cd-inverted;
+ status = "okay";
+};
- ir@01f02000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
- status = "okay";
- };
+&pio {
+ led_pins_m9: led_pins@0 {
+ allwinner,pins = "PH13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_m9>;
-
- blue {
- label = "m9:blue:usr";
- gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
- };
+ mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_vbus_pin_m9>;
- gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+ allwinner,pins = "PC27";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_usb1_vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_vbus_pin_m9>;
+ gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
ranges;
framebuffer@0 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll6 0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ clocks = <&cpu>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <3>;
};
cpu@1 {
};
};
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&rtp>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
memory {
reg = <0x40000000 0x80000000>;
};
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
clock-output-names = "ahb1";
+
+ /*
+ * Clock AHB1 from PLL6, instead of CPU/AXI which
+ * has rate changes due to cpufreq. Also the DMA
+ * controller requires AHB1 clocked from PLL6.
+ */
+ assigned-clocks = <&ahb1>;
+ assigned-clock-parents = <&pll6 0>;
};
ahb1_gates: clk@01c20060 {
reg = <0x01c2006c 0x4>;
clocks = <&apb2>;
clock-output-names = "apb2_i2c0", "apb2_i2c1",
- "apb2_i2c2", "apb2_i2c3", "apb2_uart0",
- "apb2_uart1", "apb2_uart2", "apb2_uart3",
- "apb2_uart4", "apb2_uart5";
+ "apb2_i2c2", "apb2_i2c3",
+ "apb2_uart0", "apb2_uart1",
+ "apb2_uart2", "apb2_uart3",
+ "apb2_uart4", "apb2_uart5";
};
mmc0_clk: clk@01c20088 {
usb_clk: clk@01c200cc {
#clock-cells = <1>;
- #reset-cells = <1>;
+ #reset-cells = <1>;
compatible = "allwinner,sun6i-a31-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&osc24M>;
};
/*
- * The following two are dummy clocks, placeholders used in the gmac_tx
- * clock. The gmac driver will choose one parent depending on the PHY
- * interface mode, using clk_set_rate auto-reparenting.
- * The actual TX clock rate is not controlled by the gmac_tx clock.
+ * The following two are dummy clocks, placeholders
+ * used in the gmac_tx clock. The gmac driver will
+ * choose one parent depending on the PHY interface
+ * mode, using clk_set_rate auto-reparenting.
+ *
+ * The actual TX clock rate is not controlled by the
+ * gmac_tx clock.
*/
mii_phy_tx_clk: clk@1 {
#clock-cells = <0>;
clocks = <&ahb1_gates 6>;
resets = <&ahb1_rst 6>;
#dma-cells = <1>;
-
- /* DMA controller requires AHB1 clocked from PLL6 */
- assigned-clocks = <&ahb1>;
- assigned-clock-parents = <&pll6 0>;
};
mmc0: mmc@01c0f000 {
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
reset-names = "ahb";
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usbphy: phy@01c19400 {
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ allwinner,function = "mmc1";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
gmac_pins_mii_a: gmac_mii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA8", "PA9", "PA11",
};
timer@01c60000 {
- compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
+ compatible = "allwinner,sun6i-a31-hstimer",
+ "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
+ <&pll6 0>;
clock-output-names = "ar100";
};
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ p2wi_pins: p2wi {
+ allwinner,pins = "PL0", "PL1";
+ allwinner,function = "s_p2wi";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ p2wi: i2c@01f03400 {
+ compatible = "allwinner,sun6i-a31-p2wi";
+ reg = <0x01f03400 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb0_gates 3>;
+ clock-frequency = <100000>;
+ resets = <&apb0_rst 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&p2wi_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
/ {
model = "CSQ CS908 top set box";
compatible = "csq,cs908", "allwinner,sun6i-a31s";
-};
-&usbphy {
- status = "okay";
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&ehci0 {
status = "okay";
};
-&ohci1 {
- status = "okay";
-};
-
-&pio {
- usb1_vbus_pin_csq908: usb1_vbus_pin@0 {
- allwinner,pins = "PC27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-};
-
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
+
+&ohci1 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial2 = &uart7;
};
- soc@01c00000 {
- spi0: spi@01c05000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
- cd-inverted;
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_bananapi>;
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
+ green {
+ label = "bananapi:green:usr";
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
+ };
- ehci0: usb@01c14000 {
- status = "okay";
- };
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_bananapi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+ };
+};
- ohci0: usb@01c14400 {
- status = "okay";
- };
+&ahci {
+ status = "okay";
+};
- ahci: sata@01c18000 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
- pinctrl@01c20800 {
- mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- gmac_power_pin_bananapi: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_bananapi: led_pins@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- uart3: serial@01c28c00 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_b>;
- status = "okay";
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- uart7: serial@01c29c00 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart7_pins_a>;
- status = "okay";
- };
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+ cd-inverted;
+ status = "okay";
+};
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+&ohci0 {
+ status = "okay";
+};
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+&ohci1 {
+ status = "okay";
+};
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
- phy = <&phy1>;
- phy-mode = "rgmii";
- phy-supply = <®_gmac_3v3>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+&pio {
+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_bananapi>;
-
- green {
- label = "bananapi:green:usr";
- gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
- };
+ gmac_power_pin_bananapi: gmac_power_pin@0 {
+ allwinner,pins = "PH23";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+ led_pins_bananapi: led_pins@0 {
+ allwinner,pins = "PH24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
+®_usb1_vbus {
+ status = "okay";
+};
- reg_gmac_3v3: gmac-3v3 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_power_pin_bananapi>;
- regulator-name = "gmac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- enable-active-high;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
- };
+®_usb2_vbus {
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>,
+ <&spi0_cs0_pins_a>,
+ <&spi0_cs1_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_b>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "LeMaker Banana Pro";
compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart2;
+ serial2 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
+ pinctrl-0 = <&ir0_rx_pins_a>;
status = "okay";
};
&spi0 {
pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>;
+ pinctrl-0 = <&spi0_pins_a>,
+ <&spi0_cs0_pins_a>,
+ <&spi0_cs1_pins_a>;
status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Cubietech Cubieboard2";
compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- led_pins_cubieboard2: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- };
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+ aliases {
+ serial0 = &uart0;
+ };
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
};
+};
- reg_ahci_5v: ahci-5v {
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
-#include "axp209.dtsi"
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
-&cpu0 {
- cpu-supply = <®_dcdc2>;
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
};
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ led_pins_cubieboard2: led_pins@0 {
+ allwinner,pins = "PH20", "PH21";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_ahci_5v {
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Cubietech Cubietruck";
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- mmc3: mmc@01c12000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
- vmmc-supply = <®_vmmc3>;
- bus-width = <4>;
- non-removable;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc3_pins_a: mmc3@0 {
- /* AP6210 requires pull-up */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- vmmc3_pin_cubietruck: vmmc3_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_cubietruck: led_pins@0 {
- allwinner,pins = "PH7", "PH11", "PH20", "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb0_vbus_pin_a: usb0_vbus_pin@0 {
- allwinner,pins = "PH17";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- pwm: pwm@01c20e00 {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
- status = "okay";
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- };
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
-
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
- phy = <&phy1>;
- phy-mode = "rgmii";
- status = "okay";
+ aliases {
+ serial0 = &uart0;
+ };
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
};
};
- reg_ahci_5v: ahci-5v {
- pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- reg_usb0_vbus: usb0-vbus {
- pinctrl-0 = <&usb0_vbus_pin_a>;
- gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
-
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
-
reg_vmmc3: vmmc3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
};
};
-#include "axp209.dtsi"
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
&cpu0 {
cpu-supply = <®_dcdc2>;
};
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <®_vmmc3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc3_pins_a {
+ /* AP6210 requires pull-up */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vmmc3_pin_cubietruck: vmmc3_pin@0 {
+ allwinner,pins = "PH9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+ allwinner,pins = "PH12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_cubietruck: led_pins@0 {
+ allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb0_vbus_pin_a: usb0_vbus_pin@0 {
+ allwinner,pins = "PH17";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+ status = "okay";
+};
+
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
+ gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
+
+®_usb0_vbus {
+ pinctrl-0 = <&usb0_vbus_pin_a>;
+ gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
*
* Wills Wang <wills.wang.open@gmail.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
serial4 = &uart5;
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- mmc3: mmc@01c12000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
- vmmc-supply = <®_mmc3_vdd>;
- bus-width = <4>;
- non-removable;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pio: pinctrl@01c20800 {
- ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
- allwinner,pins = "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- pwm: pwm@01c20e00 {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>;
- status = "okay";
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- uart2: serial@01c28800 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_a>;
- status = "okay";
- };
-
- uart3: serial@01c28c00 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_a>;
- status = "okay";
- };
-
- uart4: serial@01c29000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
- status = "okay";
- };
-
- uart5: serial@01c29400 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart5_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
-
- i2c3: i2c@01c2b800 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins_a>;
- status = "okay";
- };
-
- spi2: spi@01c17000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_b>;
- status = "okay";
- };
-
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
- phy = <&phy1>;
- phy-mode = "rgmii";
- phy-supply = <®_gmac_vdd>;
- /* phy reset config */
- snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
- snps,reset-active-low;
- /* wait 1s after reset, otherwise fail to read phy id */
- snps,reset-delays-us = <0 10000 1000000>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
- };
-
- reg_ahci_5v: ahci-5v {
- pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
- gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
- status = "okay";
- };
-
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
- gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
- status = "okay";
- };
-
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+ chosen {
+ stdout-path = "serial0:115200n8";
};
reg_mmc3_vdd: mmc3_vdd {
gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
};
};
+
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <®_gmac_vdd>;
+ /* phy reset config */
+ snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+ snps,reset-active-low;
+ /* wait 1s after reset, otherwise fail to read phy id */
+ snps,reset-delays-us = <0 10000 1000000>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_a>;
+ status = "okay";
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <®_mmc3_vdd>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
+ allwinner,pins = "PH15";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
+ allwinner,pins = "PH9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
+ allwinner,pins = "PH16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins_a>;
+ status = "okay";
+};
+
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
+ gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+ status = "okay";
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_b>,
+ <&spi2_cs0_pins_b>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_a>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_a>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "I12 / Q5 / QT840A A20 tvbox";
compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- mmc3: mmc@01c12000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
- vmmc-supply = <®_vmmc3>;
- bus-width = <4>;
- non-removable;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc3_pins_a: mmc3@0 {
- /* AP6210 / AP6330 requires pull-up */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
- allwinner,pins = "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_i12_tvbox: led_pins@0 {
- allwinner,pins = "PH9", "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ aliases {
+ serial0 = &uart0;
+ };
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- phy-supply = <®_gmac_3v3>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
};
};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
-
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
-
reg_vmmc3: vmmc3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <®_vmmc3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc3_pins_a {
+ /* AP6210 / AP6330 requires pull-up */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
+ allwinner,pins = "PH12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
+ allwinner,pins = "PH21";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_i12_tvbox: led_pins@0 {
+ allwinner,pins = "PH9", "PH20";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Mele M3";
compatible = "mele,m3", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
+ aliases {
+ serial0 = &uart0;
+ };
- mmc2: mmc@01c11000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_a>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- non-removable;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_m3>;
- ehci0: usb@01c14000 {
- status = "okay";
+ blue {
+ label = "m3:blue:usr";
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
+ };
+};
- ohci0: usb@01c14400 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
- pinctrl@01c20800 {
- led_pins_m3: led_pins@0 {
- allwinner,pins = "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
- };
+&ohci0 {
+ status = "okay";
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_m3>;
+&ohci1 {
+ status = "okay";
+};
- blue {
- label = "m3:blue:usr";
- gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
- };
+&pio {
+ led_pins_m3: led_pins@0 {
+ allwinner,pins = "PH20";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
+®_usb1_vbus {
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
};
--- /dev/null
+/*
+ * Copyright 2015 Marcus Cooper
+ *
+ * Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "mk808c";
+ compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Olimex A20-OLinuXino-LIME";
compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
+ aliases {
+ serial0 = &uart0;
+ };
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- ehci0: usb@01c14000 {
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxinolime>;
- ohci0: usb@01c14400 {
- status = "okay";
+ green {
+ label = "a20-olinuxino-lime:green:usr";
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
+};
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- pinctrl@01c20800 {
- ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
- };
+&ohci0 {
+ status = "okay";
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxinolime>;
+&ohci1 {
+ status = "okay";
+};
- green {
- label = "a20-olinuxino-lime:green:usr";
- gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
+&pio {
+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+ allwinner,pins = "PC3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_ahci_5v: ahci-5v {
- pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ led_pins_olinuxinolime: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Olimex A20-OLinuXino-LIME2";
compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
+ aliases {
+ serial0 = &uart0;
+ };
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- ehci0: usb@01c14000 {
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxinolime>;
- ohci0: usb@01c14400 {
- status = "okay";
+ green {
+ label = "a20-olinuxino-lime2:green:usr";
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
+ reg_axp_ipsout: axp_ipsout {
+ compatible = "regulator-fixed";
+ regulator-name = "axp-ipsout";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- pinctrl@01c20800 {
- ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
- led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ acin-supply = <®_axp_ipsout>;
+ vin2-supply = <®_axp_ipsout>;
+ vin3-supply = <®_axp_ipsout>;
+ ldo24in-supply = <®_axp_ipsout>;
+ ldo3in-supply = <®_axp_ipsout>;
+
+ regulators {
+ vdd_rtc: ldo1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
};
- };
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ avcc: ldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- acin-supply = <®_axp_ipsout>;
- vin2-supply = <®_axp_ipsout>;
- vin3-supply = <®_axp_ipsout>;
- ldo24in-supply = <®_axp_ipsout>;
- ldo3in-supply = <®_axp_ipsout>;
-
- regulators {
- vdd_rtc: ldo1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- };
-
- avcc: ldo2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vcc_csi0: ldo3 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <3500000>;
- regulator-always-on;
- };
-
- vcc_csi1: ldo4 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_cpu: dcdc2 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <2275000>;
- regulator-always-on;
- };
-
- vdd_int: dcdc3 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <3500000>;
- regulator-always-on;
- };
- };
+ vcc_csi0: ldo3 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
};
- };
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
+ vcc_csi1: ldo4 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
- phy = <&phy1>;
- phy-mode = "rgmii";
- status = "okay";
+ vdd_cpu: dcdc2 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-always-on;
+ };
- phy1: ethernet-phy@1 {
- reg = <1>;
+ vdd_int: dcdc3 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
};
};
};
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxinolime>;
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
- green {
- label = "a20-olinuxino-lime2:green:usr";
- gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- reg_ahci_5v: ahci-5v {
- pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
+&ohci0 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
+&ohci1 {
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+&pio {
+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+ allwinner,pins = "PC3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_axp_ipsout: axp_ipsout {
- compatible = "regulator-fixed";
- regulator-name = "axp-ipsout";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
+ led_pins_olinuxinolime: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
spi1 = &spi2;
};
- soc@01c00000 {
- spi1: spi@01c06000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins_a>;
- status = "okay";
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- mmc3: mmc@01c12000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
- cd-inverted;
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxino>;
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
+ green {
+ label = "a20-olinuxino-micro:green:usr";
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
+};
- ehci0: usb@01c14000 {
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
- ohci0: usb@01c14400 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- spi2: spi@01c17000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_a>;
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- pinctrl@01c20800 {
- mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
- allwinner,pins = "PH11";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- lradc: lradc@01c22800 {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@191 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <191274>;
- };
-
- button@392 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <392644>;
- };
-
- button@601 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <601151>;
- };
-
- button@795 {
- label = "Search";
- linux,code = <KEY_SEARCH>;
- channel = <0>;
- voltage = <795090>;
- };
-
- button@987 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <987387>;
- };
-
- button@1184 {
- label = "Esc";
- linux,code = <KEY_ESC>;
- channel = <0>;
- voltage = <1184678>;
- };
-
- button@1398 {
- label = "Enter";
- linux,code = <KEY_ENTER>;
- channel = <0>;
- voltage = <1398804>;
- };
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
- uart6: serial@01c29800 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart6_pins_a>;
- status = "okay";
- };
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
- uart7: serial@01c29c00 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart7_pins_a>;
- status = "okay";
- };
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
+ button@795 {
+ label = "Search";
+ linux,code = <KEY_SEARCH>;
+ channel = <0>;
+ voltage = <795090>;
+ };
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
+ };
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+ button@1184 {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ channel = <0>;
+ voltage = <1184678>;
+ };
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ button@1398 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <1398804>;
};
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxino>;
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- green {
- label = "a20-olinuxino-micro:green:usr";
- gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ cd-inverted;
+ status = "okay";
+};
- reg_ahci_5v: ahci-5v {
- status = "okay";
- };
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&pio {
+ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
+ allwinner,pins = "PH11";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_ahci_5v {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>,
+ <&spi1_cs0_pins_a>;
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>,
+ <&spi2_cs0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6_pins_a>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Orange Pi Mini";
+ compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_orangepi>;
+
+ green {
+ label = "orangepi:green:usr";
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+ };
+
+ blue {
+ label = "orangepi:blue:usr";
+ gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_orangepi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ };
+};
+
+&ahci {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
+ allwinner,pins = "PH11";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ gmac_power_pin_orangepi: gmac_power_pin@0 {
+ allwinner,pins = "PH23";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_orangepi: led_pins@0 {
+ allwinner,pins = "PH24", "PH25";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+ allwinner,pins = "PH26";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+ gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+ status = "okay";
+};
+
+®_usb2_vbus {
+ pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+ gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Orange Pi";
+ compatible = "xunlong,orangepi", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_orangepi>;
+
+ green {
+ label = "orangepi:green:usr";
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_orangepi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ };
+};
+
+&ahci {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ gmac_power_pin_orangepi: gmac_power_pin@0 {
+ allwinner,pins = "PH23";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_orangepi: led_pins@0 {
+ allwinner,pins = "PH24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+ allwinner,pins = "PH26";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+ gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+ status = "okay";
+};
+
+®_usb2_vbus {
+ pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+ gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Adam Sampson <ats@offog.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "LinkSprite pcDuino3 Nano";
+ compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_pcduino3_nano>;
+
+ /* Marked "LED3" on the PCB. */
+ usr1 {
+ label = "pcduino3-nano:green:usr1";
+ gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+ };
+
+ /* Marked "LED4" on the PCB. */
+ usr2 {
+ label = "pcduino3-nano:green:usr2";
+ gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+ };
+ };
+};
+
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_pcduino3_nano: led_pins@0 {
+ allwinner,pins = "PH16", "PH15";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
+ allwinner,pins = "PH11";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>;
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ status = "okay";
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
+ gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "LinkSprite pcDuino3";
compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- ahci_pwr_pin_a: ahci_pwr_pin@0 {
- allwinner,pins = "PH2";
- };
-
- led_pins_pcduino3: led_pins@0 {
- allwinner,pins = "PH15", "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- key_pins_pcduino3: key_pins@0 {
- allwinner,pins = "PH17", "PH18", "PH19";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
-
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+ aliases {
+ serial0 = &uart0;
+ };
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
};
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
+
+&ahci_pwr_pin_a {
+ allwinner,pins = "PH2";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+&pio {
+ led_pins_pcduino3: led_pins@0 {
+ allwinner,pins = "PH15", "PH16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_ahci_5v: ahci-5v {
- gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ key_pins_pcduino3: key_pins@0 {
+ allwinner,pins = "PH17", "PH18", "PH19";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_ahci_5v {
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Wexler TAB7200";
+ compatible = "wexler,tab7200", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@571 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <571428>;
+ };
+
+ button@761 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <761904>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
ranges;
framebuffer@0 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
clocks = <&cpu>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
- /* kHz uV */
- 960000 1400000
- 912000 1400000
- 864000 1300000
- 720000 1200000
- 528000 1100000
- 312000 1000000
- 144000 900000
+ /* kHz uV */
+ 960000 1400000
+ 912000 1400000
+ 864000 1300000
+ 720000 1200000
+ 528000 1100000
+ 312000 1000000
+ 144000 900000
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
compatible = "allwinner,sun4i-a10-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ clock-output-names = "pll6_sata", "pll6_other", "pll6",
+ "pll6_div_4";
};
pll8: clk@01c20040 {
ahb: ahb@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-ahb-clk";
+ compatible = "allwinner,sun5i-a13-ahb-clk";
reg = <0x01c20054 0x4>;
- clocks = <&axi>;
+ clocks = <&axi>, <&pll6 3>, <&pll6 1>;
clock-output-names = "ahb";
+ /*
+ * Use PLL6 as parent, instead of CPU/AXI
+ * which has rate changes due to cpufreq
+ */
+ assigned-clocks = <&ahb>;
+ assigned-clock-parents = <&pll6 3>;
};
ahb_gates: clk@01c20060 {
usb_clk: clk@01c200cc {
#clock-cells = <1>;
- #reset-cells = <1>;
+ #reset-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+ clock-output-names = "usb_ohci0", "usb_ohci1",
+ "usb_phy";
};
spi3_clk: clk@01c200d4 {
};
/*
- * The following two are dummy clocks, placeholders used in the gmac_tx
- * clock. The gmac driver will choose one parent depending on the PHY
- * interface mode, using clk_set_rate auto-reparenting.
- * The actual TX clock rate is not controlled by the gmac_tx clock.
+ * The following two are dummy clocks, placeholders
+ * used in the gmac_tx clock. The gmac driver will
+ * choose one parent depending on the PHY interface
+ * mode, using clk_set_rate auto-reparenting.
+ *
+ * The actual TX clock rate is not controlled by the
+ * gmac_tx clock.
*/
mii_phy_tx_clk: clk@2 {
#clock-cells = <0>;
};
};
+ /*
+ * Note we use the address where the mmio registers start, not where
+ * the SRAM blocks start, this cannot be changed because that would be
+ * a devicetree ABI change.
+ */
soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ sram@00000000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00000000 0x4000>;
+ allwinner,sram-name = "A1";
+ };
+
+ sram@00004000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00004000 0x4000>;
+ allwinner,sram-name = "A2";
+ };
+
+ sram@00008000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00008000 0x4000>;
+ allwinner,sram-name = "A3-A4";
+ };
+
+ sram@00010000 {
+ compatible = "allwinner,sun4i-a10-sram";
+ reg = <0x00010000 0x1000>;
+ allwinner,sram-name = "D";
+ };
+
+ sram-controller@01c00000 {
+ compatible = "allwinner,sun4i-a10-sram-controller";
+ reg = <0x01c00000 0x30>;
+ };
+
nmi_intc: interrupt-controller@01c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
"sample";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
"sample";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
"sample";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
"sample";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usbphy: phy@01c13400 {
};
spi0_pins_a: spi0@0 {
- allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14";
+ allwinner,pins = "PI11", "PI12", "PI13";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi0_cs0_pins_a: spi0_cs0@0 {
+ allwinner,pins = "PI10";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi0_cs1_pins_a: spi0_cs1@0 {
+ allwinner,pins = "PI14";
allwinner,function = "spi0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi1_pins_a: spi1@0 {
- allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+ allwinner,pins = "PI17", "PI18", "PI19";
+ allwinner,function = "spi1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi1_cs0_pins_a: spi1_cs0@0 {
+ allwinner,pins = "PI16";
allwinner,function = "spi1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_a: spi2@0 {
- allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+ allwinner,pins = "PC20", "PC21", "PC22";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_b: spi2@1 {
- allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+ allwinner,pins = "PB15", "PB16", "PB17";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_cs0_pins_a: spi2_cs0@0 {
+ allwinner,pins = "PC19";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_cs0_pins_b: spi2_cs0@1 {
+ allwinner,pins = "PB14";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc2_pins_a: mmc2@0 {
- allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11";
+ allwinner,pins = "PC6", "PC7", "PC8",
+ "PC9", "PC10", "PC11";
allwinner,function = "mmc2";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc3_pins_a: mmc3@0 {
- allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+ allwinner,pins = "PI4", "PI5", "PI6",
+ "PI7", "PI8", "PI9";
allwinner,function = "mmc3";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- ir0_pins_a: ir0@0 {
- allwinner,pins = "PB3","PB4";
+ ir0_rx_pins_a: ir0@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "ir0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ir0_tx_pins_a: ir0@1 {
+ allwinner,pins = "PB3";
allwinner,function = "ir0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- ir1_pins_a: ir1@0 {
- allwinner,pins = "PB22","PB23";
+ ir1_rx_pins_a: ir1@0 {
+ allwinner,pins = "PB23";
+ allwinner,function = "ir1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ir1_tx_pins_a: ir1@1 {
+ allwinner,pins = "PB22";
allwinner,function = "ir1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
rtp: rtp@01c25000 {
- compatible = "allwinner,sun4i-a10-ts";
+ compatible = "allwinner,sun5i-a13-ts";
reg = <0x01c25000 0x100>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <0>;
};
i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ compatible = "allwinner,sun7i-a20-i2c",
+ "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 0>;
};
i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ compatible = "allwinner,sun7i-a20-i2c",
+ "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 1>;
};
i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ compatible = "allwinner,sun7i-a20-i2c",
+ "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 2>;
};
i2c3: i2c@01c2b800 {
- compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ compatible = "allwinner,sun7i-a20-i2c",
+ "allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 3>;
};
i2c4: i2c@01c2c000 {
- compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ compatible = "allwinner,sun7i-a20-i2c",
+ "allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 15>;
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
};
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- cd-inverted;
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
- allwinner,pins = "PB4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
- lradc: lradc@01c22800 {
- vref-supply = <®_vcc3v0>;
- status = "okay";
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
- button@200 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <200000>;
- };
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ /* pull-ups and devices require PMIC regulator */
+ status = "failed";
+};
- button@400 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <400000>;
- };
- };
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
- };
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- /* pull-ups and devices require PMIC regulator */
- status = "failed";
- };
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
- r_uart: serial@01f02800 {
- pinctrl-names = "default";
- pinctrl-0 = <&r_uart_pins_a>;
- status = "okay";
- };
+&pio {
+ mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
};
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
cpus {
+ enable-method = "allwinner,sun8i-a23";
#address-cells = <1>;
#size-cells = <0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
pio: pinctrl@01c20800 {
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc1_pins_a: mmc1@0 {
- allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5";
+ allwinner,pins = "PG0", "PG1", "PG2",
+ "PG3", "PG4", "PG5";
allwinner,function = "mmc1";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+ cpucfg@01f01c00 {
+ compatible = "allwinner,sun8i-a23-cpuconfig";
+ reg = <0x01f01c00 0x300>;
+ };
+
r_uart: serial@01f02800 {
compatible = "snps,dw-apb-uart";
reg = <0x01f02800 0x400>;
--- /dev/null
+/*
+ * Copyright 2015 Tyler Baker
+ *
+ * Tyler Baker <tyler.baker@linaro.org>
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Cubietech Cubieboard4";
+ compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+};
+
+&pio {
+ mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
+ allwinner,pins = "PH18";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
};
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
leds {
gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
};
};
+
+ reg_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_vbus_pin_optimus>;
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
};
&i2c3 {
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+&ohci0 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
&pio {
led_pins_optimus: led-pins@0 {
allwinner,pins = "PH0", "PH1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+ usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};
&mmc0 {
status = "okay";
};
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_optimus>;
+ gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
/* Enable internal pull-up */
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+&usbphy1 {
+ phy-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
+&usbphy2 {
+ status = "okay";
+};
+
+&usbphy3 {
+ phy-supply = <®_usb3_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
reg = <0 0x20000000 0x02 0>;
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
clock-output-names = "osc32k";
};
+ usb_mod_clk: clk@00a08000 {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun9i-a80-usb-mod-clk";
+ reg = <0x00a08000 0x4>;
+ clocks = <&ahb1_gates 1>;
+ clock-output-names = "usb0_ahb", "usb_ohci0",
+ "usb1_ahb", "usb_ohci1",
+ "usb2_ahb", "usb_ohci2";
+ };
+
+ usb_phy_clk: clk@00a08004 {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun9i-a80-usb-phy-clk";
+ reg = <0x00a08004 0x4>;
+ clocks = <&ahb1_gates 1>;
+ clock-output-names = "usb_phy0", "usb_hsic1_480M",
+ "usb_phy1", "usb_hsic2_480M",
+ "usb_phy2", "usb_hsic_12M";
+ };
+
pll4: clk@0600000c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-pll4-clk";
"ahb0_ss", "ahb0_sd", "ahb0_nand1",
"ahb0_nand0", "ahb0_sdram",
"ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
- "ahb0_spi0","ahb0_spi1", "ahb0_spi2",
+ "ahb0_spi0", "ahb0_spi1", "ahb0_spi2",
"ahb0_spi3";
};
*/
ranges = <0 0 0 0x20000000>;
+ ehci0: usb@00a00000 {
+ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+ reg = <0x00a00000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 1>;
+ resets = <&usb_mod_clk 17>;
+ phys = <&usbphy1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@00a00400 {
+ compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+ reg = <0x00a00400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>;
+ resets = <&usb_mod_clk 17>;
+ phys = <&usbphy1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy1: phy@00a00800 {
+ compatible = "allwinner,sun9i-a80-usb-phy";
+ reg = <0x00a00800 0x4>;
+ clocks = <&usb_phy_clk 1>;
+ clock-names = "phy";
+ resets = <&usb_phy_clk 17>;
+ reset-names = "phy";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ ehci1: usb@00a01000 {
+ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+ reg = <0x00a01000 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 3>;
+ resets = <&usb_mod_clk 18>;
+ phys = <&usbphy2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy2: phy@00a01800 {
+ compatible = "allwinner,sun9i-a80-usb-phy";
+ reg = <0x00a01800 0x4>;
+ clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+ <&usb_phy_clk 3>;
+ clock-names = "hsic_480M", "hsic_12M", "phy";
+ resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+ reset-names = "hsic", "phy";
+ status = "disabled";
+ #phy-cells = <0>;
+ /* usb1 is always used with HSIC */
+ phy_type = "hsic";
+ };
+
+ ehci2: usb@00a02000 {
+ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+ reg = <0x00a02000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 5>;
+ resets = <&usb_mod_clk 19>;
+ phys = <&usbphy3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@00a02400 {
+ compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+ reg = <0x00a02400 0x100>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>;
+ resets = <&usb_mod_clk 19>;
+ phys = <&usbphy3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy3: phy@00a02800 {
+ compatible = "allwinner,sun9i-a80-usb-phy";
+ reg = <0x00a02800 0x4>;
+ clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
+ <&usb_phy_clk 5>;
+ clock-names = "hsic_480M", "hsic_12M", "phy";
+ resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
+ reset-names = "hsic", "phy";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
reset-names = "ahb";
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc_config_clk: clk@01c13000 {
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
target-12v-supply = <&vdd_12v0_sata>;
};
+ hda@0,70030000 {
+ status = "okay";
+ };
+
padctl@0,7009f000 {
pinctrl-0 = <&padctl_default>;
pinctrl-names = "default";
sdhci@0,700b0600 {
status = "okay";
bus-width = <8>;
+ non-removable;
};
ahub@0,70300000 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "+VDD_LED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_mux>;
clocks = <&tegra_car TEGRA124_CLK_HDA>,
<&tegra_car TEGRA124_CLK_HDA2HDMI>,
<&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
- clock-names = "hda", "hda2hdmi", "hdacodec_2x";
+ clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&tegra_car 125>, /* hda */
<&tegra_car 128>, /* hda2hdmi */
<&tegra_car 111>; /* hda2codec_2x */
- reset-names = "hda", "hda2hdmi", "hdacodec_2x";
+ reset-names = "hda", "hda2hdmi", "hda2codec_2x";
status = "disabled";
};
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 59>, <&tegra_car 22>;
+ resets = <&tegra_car 22>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,has-utmi-pad-registers;
status = "disabled";
};
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 22>, <&tegra_car 22>;
+ resets = <&tegra_car 58>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
- nvidia,has-utmi-pad-registers;
status = "disabled";
};
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 58>, <&tegra_car 22>;
+ resets = <&tegra_car 59>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
vdd-supply = <&hdmi_vdd_reg>;
pll-supply = <&hdmi_pll_reg>;
+ hdmi-supply = <&vdd_hdmi>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ vdd_hdmi: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "VDDIO_HDMI";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_reg>;
+ };
};
sound {
+#include <dt-bindings/input/input.h>
#include "tegra30.dtsi"
/**
* tegra30-cardhu-a04.dts.
* The identification of board is done in two ways, by looking the sticker
* on PCB and by reading board id eeprom.
- * The stciker will have number like 600-81291-1000-002 C.3. In this 4th
+ * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
* number is the fab version like here it is 002 and hence fab version A02.
* The (downstream internal) U-Boot of Cardhu display the board-id as
* follows:
<&tegra_car TEGRA30_CLK_EXTERN1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ interrupt-parent = <&pmic>;
+ interrupts = <2 0>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <100>;
+ gpio-key,wakeup;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <10>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <10>;
+ };
+ };
};
reset-names = "fuse";
};
+ hda@70030000 {
+ compatible = "nvidia,tegra30-hda";
+ reg = <0x70030000 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_HDA>,
+ <&tegra_car TEGRA30_CLK_HDA2HDMI>,
+ <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>;
+ clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+ resets = <&tegra_car 125>, /* hda */
+ <&tegra_car 128>, /* hda2hdmi */
+ <&tegra_car 111>; /* hda2codec_2x */
+ reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+ status = "disabled";
+ };
+
ahub@70080000 {
compatible = "nvidia,tegra30-ahub";
reg = <0x70080000 0x200
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-LD4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-LD4 Reference Board";
+ compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 49 4>;
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-LD4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-ld4";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-Pro4 Reference Board";
+ compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 50 4>;
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-pro4";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "socionext,uniphier-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-sLD3 Reference Board";
+ compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000
+ 0xc0000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 49 4>;
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-sld3";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "socionext,uniphier-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ timer@20000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20000200 0x20>;
+ interrupts = <1 11 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@20000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x20000600 0x20>;
+ interrupts = <1 13 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@20001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x20001000 0x1000>,
+ <0x20000100 0x100>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-sLD8 Reference Board";
+ compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 48 4>;
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-sld8";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier Support Card (Expansion Board)
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&extbus {
+ support_card: support_card {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ethsc: ethernet@00000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <0x00000000 0x1000>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ };
+
+ serialsc: uart@000b0000 {
+ compatible = "ns16550a";
+ reg = <0x000b0000 0x20>;
+ clock-frequency = <12288000>;
+ reg-shift = <1>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device tree for Colibri VF61 Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+ model = "VF610 Cortex-M4";
+ compatible = "fsl,vf610m4";
+
+ chosen {
+ bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw";
+ linux,stdout-path = "&uart2";
+ };
+
+ memory {
+ reg = <0x8c000000 0x3000000>;
+ };
+};
+
+&gpio0 {
+ status = "disabled";
+};
+
+&gpio1 {
+ status = "disabled";
+};
+
+&gpio2 {
+ status = "disabled";
+};
+
+&gpio3 {
+ status = "disabled";
+};
+
+&gpio4 {
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD2__UART2_RTS 0x21a2
+ VF610_PAD_PTD3__UART2_CTS 0x21a1
+ >;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device tree for VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+#include "vfxxx.dtsi"
+
+&mscm_ir {
+ interrupt-parent = <&nvic>;
+};
};
gem0: ethernet@e000b000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynq-gem", "cdns,gem";
reg = <0xe000b000 0x1000>;
status = "disabled";
interrupts = <0 22 4>;
};
gem1: ethernet@e000c000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynq-gem", "cdns,gem";
reg = <0xe000c000 0x1000>;
status = "disabled";
interrupts = <0 45 4>;
model = "Adapteva Parallella Board";
compatible = "adapteva,parallella", "xlnx,zynq-7000";
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ };
+
memory {
device_type = "memory";
reg = <0x0 0x40000000>;
};
chosen {
- bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
- linux,stdout-path = "/amba/serial@e0001000";
+ bootargs = "earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+ stdout-path = "serial0:115200n8";
};
};
};
chosen {
- bootargs = "console=ttyPS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
leds {
};
chosen {
- bootargs = "console=ttyPS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
usb_phy0: phy0 {
};
chosen {
- bootargs = "console=ttyPS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
usb_phy0: phy0 {
model = "Zynq ZYBO Development Board";
compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ };
+
memory {
device_type = "memory";
reg = <0x0 0x20000000>;
};
chosen {
- bootargs = "console=ttyPS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
};
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
CONFIG_SOC_VF610=y
+CONFIG_SOC_LS1021A=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
CONFIG_DMA_OMAP=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXTCON=m
-CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_PALMAS=m
CONFIG_TI_EMIF=m
CONFIG_PWM=y
};
struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size);
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size);
void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
bool xen_arch_need_swiotlb(struct device *dev,
unsigned long pfn,
unsigned long mfn);
+unsigned long xen_get_swiotlb_free_pages(unsigned int order);
#endif /* _ASM_ARM_XEN_PAGE_H */
static int of_pmu_irq_cfg(struct platform_device *pdev)
{
- int i;
+ int i, irq;
int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
if (!irqs)
return -ENOMEM;
+ /* Don't bother with PPIs; they're already affine */
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0 && irq_is_percpu(irq))
+ return 0;
+
for (i = 0; i < pdev->num_resources; ++i) {
struct device_node *dn;
int cpu;
i);
if (!dn) {
pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
- of_node_full_name(dn), i);
+ of_node_full_name(pdev->dev.of_node), i);
break;
}
/*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
u32 csirxfe;
u32 iva2_bootaddr;
u32 iva2_bootmod;
+ u32 wkup_ctrl;
u32 debobs_0;
u32 debobs_1;
u32 debobs_2;
omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
control_context.iva2_bootmod =
omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
+ control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
OMAP343X_CONTROL_IVA2_BOOTADDR);
omap_ctrl_writel(control_context.iva2_bootmod,
OMAP343X_CONTROL_IVA2_BOOTMOD);
+ omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL);
omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17)
/* 34xx GENERAL_WKUP register offsets */
+#define OMAP34XX_CONTROL_WKUP_CTRL (OMAP343X_CONTROL_GENERAL_WKUP - 0x4)
+#define OMAP36XX_GPIO_IO_PWRDNZ BIT(6)
+
#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
0x008 + (i))
#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
#endif
#ifdef CONFIG_ARCH_OMAP3
+/*
+ * Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
+ * mode for MMC1 in case bootloader did not configure things.
+ * Note that if the pins are used for MMC1, pbias-regulator
+ * manages the IO voltage.
+ */
+static void __init omap3_gpio126_127_129(void)
+{
+ u32 reg;
+
+ reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
+ reg &= ~OMAP343X_PBIASLITEVMODE1;
+ reg |= OMAP343X_PBIASLITEPWRDNZ1;
+ omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE);
+ if (cpu_is_omap3630()) {
+ reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
+ reg |= OMAP36XX_GPIO_IO_PWRDNZ;
+ omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL);
+ }
+}
+
static void __init hsmmc2_internal_input_clk(void)
{
u32 reg;
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
+ { "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, },
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
#define OMAP3430_VC_CMD_ONLP_SHIFT 16
#define OMAP3430_VC_CMD_RET_SHIFT 8
#define OMAP3430_VC_CMD_OFF_SHIFT 0
+#define OMAP3430_SREN_MASK (1 << 4)
#define OMAP3430_HSEN_MASK (1 << 3)
#define OMAP3430_MCODE_MASK (0x7 << 0)
#define OMAP3430_VALID_MASK (1 << 24)
#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT 1
#define OMAP4430_GLOBAL_WUEN_MASK (1 << 16)
#define OMAP4430_HSMCODE_MASK (0x7 << 0)
+#define OMAP4430_SRMODEEN_MASK (1 << 4)
#define OMAP4430_HSMODEEN_MASK (1 << 3)
#define OMAP4430_HSSCLL_SHIFT 24
#define OMAP4430_ICEPICK_RST_SHIFT 9
* idle. And we can also scale voltages to zero for off-idle.
* Note that no actual voltage scaling during off-idle will
* happen unless the board specific twl4030 PMIC scripts are
- * loaded.
+ * loaded. See also omap_vc_i2c_init for comments regarding
+ * erratum i531.
*/
val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
return;
}
+ /*
+ * Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around
+ * erratum i531 "Extra Power Consumed When Repeated Start Operation
+ * Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)".
+ * Otherwise I2C4 eventually leads into about 23mW extra power being
+ * consumed even during off idle using VMODE.
+ */
i2c_high_speed = voltdm->pmic->i2c_high_speed;
if (i2c_high_speed)
- voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+ voltdm->rmw(vc->common->i2c_cfg_clear_mask,
vc->common->i2c_cfg_hsen_mask,
vc->common->i2c_cfg_reg);
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
* @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
* @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
* @i2c_mcode_mask: MCODE field mask for I2C config register
*
u8 cmd_ret_shift;
u8 cmd_off_shift;
u8 i2c_cfg_reg;
+ u8 i2c_cfg_clear_mask;
u8 i2c_cfg_hsen_mask;
u8 i2c_mcode_mask;
};
.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT,
.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT,
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
+ .i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK,
.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
.i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET,
.i2c_mcode_mask = OMAP3430_MCODE_MASK,
.cmd_ret_shift = OMAP4430_RET_SHIFT,
.cmd_off_shift = OMAP4430_OFF_SHIFT,
.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+ .i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK,
.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
.i2c_mcode_mask = OMAP4430_HSMCODE_MASK,
};
config PXA310_ULPI
bool
+config PXA_SYSTEMS_CPLDS
+ tristate "Motherboard cplds"
+ default ARCH_LUBBOCK || MACH_MAINSTONE
+ help
+ This driver supports the Lubbock and Mainstone multifunction chip
+ found on the pxa25x development platform system (Lubbock) and pxa27x
+ development platform system (Mainstone). This IO board supports the
+ interrupts handling, ethernet controller, flash chips, etc ...
+
endif
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
+obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
/* Board specific IRQs */
-#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
+#define LUBBOCK_NR_IRQS IRQ_BOARD_START
+
+#define LUBBOCK_IRQ(x) (LUBBOCK_NR_IRQS + (x))
#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
-#define LUBBOCK_SA1111_IRQ_BASE (IRQ_BOARD_START + 16)
-#define LUBBOCK_NR_IRQS (IRQ_BOARD_START + 16 + 55)
+#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32)
#ifndef __ASSEMBLY__
extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
/* board specific IRQs */
-#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
+#define MAINSTONE_NR_IRQS IRQ_BOARD_START
+
+#define MAINSTONE_IRQ(x) (MAINSTONE_NR_IRQS + (x))
#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
-#define MAINSTONE_NR_IRQS (IRQ_BOARD_START + 16)
-
#endif
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
}
EXPORT_SYMBOL(lubbock_set_misc_wr);
-static unsigned long lubbock_irq_enabled;
-
-static void lubbock_mask_irq(struct irq_data *d)
-{
- int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
- LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
-}
-
-static void lubbock_unmask_irq(struct irq_data *d)
-{
- int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
- /* the irq can be acknowledged only if deasserted, so it's done here */
- LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
- LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
-}
-
-static struct irq_chip lubbock_irq_chip = {
- .name = "FPGA",
- .irq_ack = lubbock_mask_irq,
- .irq_mask = lubbock_mask_irq,
- .irq_unmask = lubbock_unmask_irq,
-};
-
-static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
- do {
- /* clear our parent irq */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- if (likely(pending)) {
- irq = LUBBOCK_IRQ(0) + __ffs(pending);
- generic_handle_irq(irq);
- }
- pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
- } while (pending);
-}
-
-static void __init lubbock_init_irq(void)
-{
- int irq;
-
- pxa25x_init_irq();
-
- /* setup extra lubbock irqs */
- for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
- irq_set_chip_and_handler(irq, &lubbock_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
- irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void lubbock_irq_resume(void)
-{
- LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-}
-
-static struct syscore_ops lubbock_irq_syscore_ops = {
- .resume = lubbock_irq_resume,
-};
-
-static int __init lubbock_irq_device_init(void)
-{
- if (machine_is_lubbock()) {
- register_syscore_ops(&lubbock_irq_syscore_ops);
- return 0;
- }
- return -ENODEV;
-}
-
-device_initcall(lubbock_irq_device_init);
-
-#endif
-
static int lubbock_udc_is_connected(void)
{
return (LUB_MISC_RD & (1 << 9)) == 0;
},
};
+static struct resource lubbock_cplds_resources[] = {
+ [0] = {
+ .start = LUBBOCK_FPGA_PHYS + 0xc0,
+ .end = LUBBOCK_FPGA_PHYS + 0xe0 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(0),
+ .end = PXA_GPIO_TO_IRQ(0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+ [2] = {
+ .start = LUBBOCK_IRQ(0),
+ .end = LUBBOCK_IRQ(6),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lubbock_cplds_device = {
+ .name = "pxa_cplds_irqs",
+ .id = -1,
+ .resource = &lubbock_cplds_resources[0],
+ .num_resources = 3,
+};
+
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
&smc91x_device,
&lubbock_flash_device[0],
&lubbock_flash_device[1],
+ &lubbock_cplds_device,
};
static struct pxafb_mode_info sharp_lm8v31_mode = {
/* Maintainer: MontaVista Software Inc. */
.map_io = lubbock_map_io,
.nr_irqs = LUBBOCK_NR_IRQS,
- .init_irq = lubbock_init_irq,
+ .init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = lubbock_init,
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
};
-static unsigned long mainstone_irq_enabled;
-
-static void mainstone_mask_irq(struct irq_data *d)
-{
- int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
- MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
-}
-
-static void mainstone_unmask_irq(struct irq_data *d)
-{
- int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
- /* the irq can be acknowledged only if deasserted, so it's done here */
- MST_INTSETCLR &= ~(1 << mainstone_irq);
- MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
-}
-
-static struct irq_chip mainstone_irq_chip = {
- .name = "FPGA",
- .irq_ack = mainstone_mask_irq,
- .irq_mask = mainstone_mask_irq,
- .irq_unmask = mainstone_unmask_irq,
-};
-
-static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
- do {
- /* clear useless edge notification */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- if (likely(pending)) {
- irq = MAINSTONE_IRQ(0) + __ffs(pending);
- generic_handle_irq(irq);
- }
- pending = MST_INTSETCLR & mainstone_irq_enabled;
- } while (pending);
-}
-
-static void __init mainstone_init_irq(void)
-{
- int irq;
-
- pxa27x_init_irq();
-
- /* setup extra Mainstone irqs */
- for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
- irq_set_chip_and_handler(irq, &mainstone_irq_chip,
- handle_level_irq);
- if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
- else
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
- set_irq_flags(MAINSTONE_IRQ(8), 0);
- set_irq_flags(MAINSTONE_IRQ(12), 0);
-
- MST_INTMSKENA = 0;
- MST_INTSETCLR = 0;
-
- irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
- irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void mainstone_irq_resume(void)
-{
- MST_INTMSKENA = mainstone_irq_enabled;
-}
-
-static struct syscore_ops mainstone_irq_syscore_ops = {
- .resume = mainstone_irq_resume,
-};
-
-static int __init mainstone_irq_device_init(void)
-{
- if (machine_is_mainstone())
- register_syscore_ops(&mainstone_irq_syscore_ops);
-
- return 0;
-}
-
-device_initcall(mainstone_irq_device_init);
-
-#endif
-
-
static struct resource smc91x_resources[] = {
[0] = {
.start = (MST_ETH_PHYS + 0x300),
},
};
+static struct resource mst_cplds_resources[] = {
+ [0] = {
+ .start = MST_FPGA_PHYS + 0xc0,
+ .end = MST_FPGA_PHYS + 0xe0 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(0),
+ .end = PXA_GPIO_TO_IRQ(0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+ [2] = {
+ .start = MAINSTONE_IRQ(0),
+ .end = MAINSTONE_IRQ(15),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mst_cplds_device = {
+ .name = "pxa_cplds_irqs",
+ .id = -1,
+ .resource = &mst_cplds_resources[0],
+ .num_resources = 3,
+};
+
static struct platform_device *platform_devices[] __initdata = {
&smc91x_device,
&mst_flash_device[0],
&mst_flash_device[1],
&mst_gpio_keys_device,
+ &mst_cplds_device,
};
static struct pxaohci_platform_data mainstone_ohci_platform_data = {
.atag_offset = 0x100, /* BLOB boot parameter setting */
.map_io = mainstone_map_io,
.nr_irqs = MAINSTONE_NR_IRQS,
- .init_irq = mainstone_init_irq,
+ .init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = mainstone_init,
--- /dev/null
+/*
+ * Intel Reference Systems cplds
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Cplds motherboard driver, supporting lubbock and mainstone SoC board.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#define FPGA_IRQ_MASK_EN 0x0
+#define FPGA_IRQ_SET_CLR 0x10
+
+#define CPLDS_NB_IRQ 32
+
+struct cplds {
+ void __iomem *base;
+ int irq;
+ unsigned int irq_mask;
+ struct gpio_desc *gpio0;
+ struct irq_domain *irqdomain;
+};
+
+static irqreturn_t cplds_irq_handler(int in_irq, void *d)
+{
+ struct cplds *fpga = d;
+ unsigned long pending;
+ unsigned int bit;
+
+ pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+ for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
+ generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
+
+ return IRQ_HANDLED;
+}
+
+static void cplds_irq_mask_ack(struct irq_data *d)
+{
+ struct cplds *fpga = irq_data_get_irq_chip_data(d);
+ unsigned int cplds_irq = irqd_to_hwirq(d);
+ unsigned int set, bit = BIT(cplds_irq);
+
+ fpga->irq_mask &= ~bit;
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+ set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+ writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
+}
+
+static void cplds_irq_unmask(struct irq_data *d)
+{
+ struct cplds *fpga = irq_data_get_irq_chip_data(d);
+ unsigned int cplds_irq = irqd_to_hwirq(d);
+ unsigned int bit = BIT(cplds_irq);
+
+ fpga->irq_mask |= bit;
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+}
+
+static struct irq_chip cplds_irq_chip = {
+ .name = "pxa_cplds",
+ .irq_mask_ack = cplds_irq_mask_ack,
+ .irq_unmask = cplds_irq_unmask,
+ .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct cplds *fpga = d->host_data;
+
+ irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, fpga);
+
+ return 0;
+}
+
+static const struct irq_domain_ops cplds_irq_domain_ops = {
+ .xlate = irq_domain_xlate_twocell,
+ .map = cplds_irq_domain_map,
+};
+
+static int cplds_resume(struct platform_device *pdev)
+{
+ struct cplds *fpga = platform_get_drvdata(pdev);
+
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+
+ return 0;
+}
+
+static int cplds_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct cplds *fpga;
+ int ret;
+ unsigned int base_irq = 0;
+ unsigned long irqflags = 0;
+
+ fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
+ if (!fpga)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res) {
+ fpga->irq = (unsigned int)res->start;
+ irqflags = res->flags;
+ }
+ if (!fpga->irq)
+ return -ENODEV;
+
+ base_irq = platform_get_irq(pdev, 1);
+ if (base_irq < 0)
+ base_irq = 0;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ fpga->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fpga->base))
+ return PTR_ERR(fpga->base);
+
+ platform_set_drvdata(pdev, fpga);
+
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+ writel(0, fpga->base + FPGA_IRQ_SET_CLR);
+
+ ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
+ irqflags, dev_name(&pdev->dev), fpga);
+ if (ret == -ENOSYS)
+ return -EPROBE_DEFER;
+
+ if (ret) {
+ dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
+ fpga->irq, ret);
+ return ret;
+ }
+
+ irq_set_irq_wake(fpga->irq, 1);
+ fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
+ CPLDS_NB_IRQ,
+ &cplds_irq_domain_ops, fpga);
+ if (!fpga->irqdomain)
+ return -ENODEV;
+
+ if (base_irq) {
+ ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0,
+ CPLDS_NB_IRQ);
+ if (ret) {
+ dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n",
+ base_irq, base_irq + CPLDS_NB_IRQ);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int cplds_remove(struct platform_device *pdev)
+{
+ struct cplds *fpga = platform_get_drvdata(pdev);
+
+ irq_set_chip_and_handler(fpga->irq, NULL, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id cplds_id_table[] = {
+ { .compatible = "intel,lubbock-cplds-irqs", },
+ { .compatible = "intel,mainstone-cplds-irqs", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cplds_id_table);
+
+static struct platform_driver cplds_driver = {
+ .driver = {
+ .name = "pxa_cplds_irqs",
+ .of_match_table = of_match_ptr(cplds_id_table),
+ },
+ .probe = cplds_probe,
+ .remove = cplds_remove,
+ .resume = cplds_resume,
+};
+
+module_platform_driver(cplds_driver);
+
+MODULE_DESCRIPTION("PXA Cplds interrupts driver");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_LICENSE("GPL");
static phys_addr_t rk3288_bootram_phy;
static struct regmap *pmu_regmap;
+static struct regmap *grf_regmap;
static struct regmap *sgrf_regmap;
static u32 rk3288_pmu_pwr_mode_con;
+static u32 rk3288_grf_soc_con0;
static u32 rk3288_sgrf_soc_con0;
static inline u32 rk3288_l2_config(void)
{
u32 mode_set, mode_set1;
+ regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0);
+
regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
&rk3288_pmu_pwr_mode_con);
+ /*
+ * We need set this bit GRF_FORCE_JTAG here, for the debug module,
+ * otherwise, it may become inaccessible after resume.
+ * This creates a potential security issue, as the sdmmc pins may
+ * accept jtag data for a short time during resume if no card is
+ * inserted.
+ * But this is of course also true for the regular boot, before we
+ * turn of the jtag/sdmmc autodetect.
+ */
+ regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG |
+ GRF_FORCE_JTAG_WRITE);
+
/*
* SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR
* PCLK_WDT_GATE - disable WDT during suspend.
SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
| SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
+ /*
+ * The dapswjdp can not auto reset before resume, that cause it may
+ * access some illegal address during resume. Let's disable it before
+ * suspend, and the MASKROM will enable it back.
+ */
+ regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE);
+
/* booting address of resuming system is from this register value */
regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
rk3288_bootram_phy);
regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE
| SGRF_FAST_BOOT_EN_WRITE);
+
+ regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 |
+ GRF_FORCE_JTAG_WRITE);
}
static int rockchip_lpmode_enter(unsigned long arg)
return PTR_ERR(pmu_regmap);
}
+ grf_regmap = syscon_regmap_lookup_by_compatible(
+ "rockchip,rk3288-grf");
+ if (IS_ERR(grf_regmap)) {
+ pr_err("%s: could not find grf regmap\n", __func__);
+ return PTR_ERR(pmu_regmap);
+ }
+
sram_np = of_find_compatible_node(NULL, NULL,
"rockchip,rk3288-pmu-sram");
if (!sram_np) {
#define RK3288_PMU_WAKEUP_RST_CLR_CNT 0x44
#define RK3288_PMU_PWRMODE_CON1 0x90
+#define RK3288_GRF_SOC_CON0 0x244
+#define GRF_FORCE_JTAG BIT(12)
+#define GRF_FORCE_JTAG_WRITE BIT(28)
+
#define RK3288_SGRF_SOC_CON0 (0x0000)
#define RK3288_SGRF_FAST_BOOT_ADDR (0x0120)
#define SGRF_PCLK_WDT_GATE BIT(6)
#define SGRF_FAST_BOOT_EN BIT(8)
#define SGRF_FAST_BOOT_EN_WRITE BIT(24)
+#define RK3288_SGRF_CPU_CON0 (0x40)
+#define SGRF_DAPDEVICEEN BIT(0)
+#define SGRF_DAPDEVICEEN_WRITE BIT(16)
+
#define RK3288_CRU_MODE_CON 0x50
#define RK3288_CRU_SEL0_CON 0x60
#define RK3288_CRU_SEL1_CON 0x64
#include "pm.h"
#define RK3288_GRF_SOC_CON0 0x244
+#define RK3288_TIMER6_7_PHYS 0xff810000
static void __init rockchip_timer_init(void)
{
if (of_machine_is_compatible("rockchip,rk3288")) {
struct regmap *grf;
+ void __iomem *reg_base;
+
+ /*
+ * Most/all uboot versions for rk3288 don't enable timer7
+ * which is needed for the architected timer to work.
+ * So make sure it is running during early boot.
+ */
+ reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K);
+ if (reg_base) {
+ writel(0, reg_base + 0x30);
+ writel(0xffffffff, reg_base + 0x20);
+ writel(0xffffffff, reg_base + 0x24);
+ writel(1, reg_base + 0x30);
+ dsb();
+ iounmap(reg_base);
+ } else {
+ pr_err("rockchip: could not map timer7 registers\n");
+ }
/*
* Disable auto jtag/sdmmc switching that causes issues
menuconfig ARCH_STI
bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7
select ARM_GIC
+ select ST_IRQCHIP
select ARM_GLOBAL_TIMER
select PINCTRL
select PINCTRL_ST
* arm_iommu_attach_device function.
*/
struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size)
{
unsigned int bits = size >> PAGE_SHIFT;
unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long);
int extensions = 1;
int err = -ENOMEM;
+ /* currently only 32-bit DMA address space is supported */
+ if (size > DMA_BIT_MASK(32) + 1)
+ return ERR_PTR(-ERANGE);
+
if (!bitmap_size)
return ERR_PTR(-EINVAL);
if (!iommu)
return false;
- /*
- * currently arm_iommu_create_mapping() takes a max of size_t
- * for size param. So check this limit for now.
- */
- if (size > SIZE_MAX)
- return false;
-
mapping = arm_iommu_create_mapping(dev->bus, dma_base, size);
if (IS_ERR(mapping)) {
pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",
*
* These are the low level assembler for performing cache and TLB
* functions on the arm1020.
- *
- * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
*/
#include <linux/linkage.h>
#include <linux/init.h>
*
* These are the low level assembler for performing cache and TLB
* functions on the arm1020e.
- *
- * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
*/
#include <linux/linkage.h>
#include <linux/init.h>
.type __arm925_setup, #function
__arm925_setup:
mov r0, #0
-#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE)
- orr r0,r0,#1 << 7
-#endif
/* Transparent on, D-cache clean & flush mode. See NOTE2 above */
orr r0,r0,#1 << 1 @ transparent mode on
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
initfn __feroceon_setup, __\name\()_proc_info
- .long __feroceon_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
#include <linux/gfp.h>
#include <linux/highmem.h>
#include <linux/export.h>
+#include <linux/memblock.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/interface.h>
+unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+{
+ struct memblock_region *reg;
+ gfp_t flags = __GFP_NOWARN;
+
+ for_each_memblock(memory, reg) {
+ if (reg->base < (phys_addr_t)0xffffffff) {
+ flags |= __GFP_DMA;
+ break;
+ }
+ }
+ return __get_free_pages(flags, order);
+}
+
enum dma_cache_op {
DMA_UNMAP,
DMA_MAP,
select GENERIC_EARLY_IOREMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
+ select GENERIC_IRQ_SHOW_LEVEL
select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
always := $(dtb-y)
--- /dev/null
+ /*
+ * Devices shared by all Juno boards
+ */
+
+ memtimer: timer@2a810000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x2a810000 0x0 0x10000>;
+ clock-frequency = <50000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ frame@2a830000 {
+ frame-number = <1>;
+ interrupts = <0 60 4>;
+ reg = <0x0 0x2a830000 0x0 0x10000>;
+ };
+ };
+
+ gic: interrupt-controller@2c010000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ reg = <0x0 0x2c010000 0 0x1000>,
+ <0x0 0x2c02f000 0 0x2000>,
+ <0x0 0x2c04f000 0 0x2000>,
+ <0x0 0x2c06f000 0 0x2000>;
+ #address-cells = <2>;
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ ranges = <0 0 0 0x2c1c0000 0 0x40000>;
+ v2m_0: v2m@0 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0 0 0 0x1000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ /include/ "juno-clocks.dtsi"
+
+ dma@7ff00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0x7ff00000 0 0x1000>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_faxiclk>;
+ clock-names = "apb_pclk";
+ };
+
+ soc_uart0: uart@7ff80000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x7ff80000 0x0 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ i2c@7ffa0000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x7ffa0000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <500>;
+ clocks = <&soc_smc50mhz>;
+
+ dvi0: dvi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ };
+
+ dvi1: dvi-transmitter@71 {
+ compatible = "nxp,tda998x";
+ reg = <0x71>;
+ };
+ };
+
+ ohci@7ffb0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0x7ffb0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ ehci@7ffc0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0x7ffc0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ memory-controller@7ffd0000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0 0x7ffd0000 0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* last 16MB of the first memory area is reserved for secure world use by firmware */
+ reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+ <0x00000008 0x80000000 0x1 0x80000000>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 15>;
+ interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;
+
+ /include/ "juno-motherboard.dtsi"
+ };
clock-output-names = "apb_pclk";
};
- soc_faxiclk: refclk533mhz {
+ soc_faxiclk: refclk400mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <533000000>;
+ clock-frequency = <400000000>;
clock-output-names = "faxi_clk";
};
--- /dev/null
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "ARM Juno development board (r1)";
+ compatible = "arm,juno-r1", "arm,juno", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ A57_0: cpu@0 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ };
+
+ A57_1: cpu@1 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ };
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x101>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x102>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x103>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A57_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A53_L2: l2-cache1 {
+ compatible = "cache";
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A57_0>,
+ <&A57_1>,
+ <&A53_0>,
+ <&A53_1>,
+ <&A53_2>,
+ <&A53_3>;
+ };
+
+ #include "juno-base.dtsi"
+
+};
+
+&memtimer {
+ status = "okay";
+};
};
};
- memory@80000000 {
- device_type = "memory";
- /* last 16MB of the first memory area is reserved for secure world use by firmware */
- reg = <0x00000000 0x80000000 0x0 0x7f000000>,
- <0x00000008 0x80000000 0x1 0x80000000>;
- };
-
- gic: interrupt-controller@2c001000 {
- compatible = "arm,gic-400", "arm,cortex-a15-gic";
- reg = <0x0 0x2c010000 0 0x1000>,
- <0x0 0x2c02f000 0 0x2000>,
- <0x0 0x2c04f000 0 0x2000>,
- <0x0 0x2c06f000 0 0x2000>;
- #address-cells = <0>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
<&A53_3>;
};
- /include/ "juno-clocks.dtsi"
-
- dma@7ff00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0x7ff00000 0 0x1000>;
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_faxiclk>;
- clock-names = "apb_pclk";
- };
-
- soc_uart0: uart@7ff80000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0x7ff80000 0x0 0x1000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- i2c@7ffa0000 {
- compatible = "snps,designware-i2c";
- reg = <0x0 0x7ffa0000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <400000>;
- i2c-sda-hold-time-ns = <500>;
- clocks = <&soc_smc50mhz>;
-
- dvi0: dvi-transmitter@70 {
- compatible = "nxp,tda998x";
- reg = <0x70>;
- };
-
- dvi1: dvi-transmitter@71 {
- compatible = "nxp,tda998x";
- reg = <0x71>;
- };
- };
-
- ohci@7ffb0000 {
- compatible = "generic-ohci";
- reg = <0x0 0x7ffb0000 0x0 0x10000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- ehci@7ffc0000 {
- compatible = "generic-ehci";
- reg = <0x0 0x7ffc0000 0x0 0x10000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- memory-controller@7ffd0000 {
- compatible = "arm,pl354", "arm,primecell";
- reg = <0 0x7ffd0000 0 0x1000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- };
-
- smb {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 15>;
- interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
-
- /include/ "juno-motherboard.dtsi"
- };
+ #include "juno-base.dtsi"
};
--- /dev/null
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+&pm8916_gpios {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pm8916_gpios_default>;
+
+ pm8916_gpios_default: default {
+ usb_hub_reset_pm {
+ pins = "gpio1";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ usb_sw_sel_pm {
+ pins = "gpio2";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-disable;
+ };
+ usr_led_3_ctrl {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ usr_led_4_ctrl {
+ pins = "gpio4";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ };
+};
--- /dev/null
+
+#include <dt-bindings/gpio/gpio.h>
+
+&msmgpio {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&soc_gpios_default>;
+
+ soc_gpios_default: default {
+ usr_led_1_ctrl_default: usr_led_1_ctrl_default {
+ pins = "gpio21";
+ function = "gpio";
+ output-low;
+ };
+ usr_led_2_ctrl_default: usr_led_2_ctrl_default {
+ pins = "gpio120";
+ function = "gpio";
+ output-low;
+ };
+ };
+};
*/
#include "msm8916.dtsi"
+#include "pm8916.dtsi"
+#include "apq8016-sbc-soc-pins.dtsi"
+#include "apq8016-sbc-pmic-pins.dtsi"
/ {
aliases {
*/
#include "msm8916.dtsi"
+#include "pm8916.dtsi"
/ {
aliases {
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
- pinctrl@1000000 {
+ restart@4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0x4ab000 0x4>;
+ };
+
+ msmgpio: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
+
+ spmi_bus: spmi@200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x200f000 0x001000>,
+ <0x2400000 0x400000>,
+ <0x2c00000 0x400000>,
+ <0x3800000 0x200000>,
+ <0x200a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
};
};
--- /dev/null
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+ usid0: pm8916@0 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000 0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pwrkey@800 {
+ compatible = "qcom,pm8941-pwrkey";
+ reg = <0x800>;
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ };
+
+ pm8916_gpios: gpios@c000 {
+ compatible = "qcom,pm8916-gpio";
+ reg = <0xc000 0x400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8916_mpps: mpps@a000 {
+ compatible = "qcom,pm8916-mpp";
+ reg = <0xa000 0x400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8916_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8916_vadc: vadc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100 0x100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ usb_in {
+ reg = <VADC_USBIN>;
+ qcom,pre-scaling = <1 10>;
+ };
+ vph_pwr {
+ reg = <VADC_VSYS>;
+ qcom,pre-scaling = <1 3>;
+ };
+ die_temp {
+ reg = <VADC_DIE_TEMP>;
+ };
+ ref_625mv {
+ reg = <VADC_REF_625MV>;
+ };
+ ref_1250v {
+ reg = <VADC_REF_1250MV>;
+ };
+ ref_gnd {
+ reg = <VADC_GND_REF>;
+ };
+ ref_vdd {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
+ };
+
+ usid1: pm8916@1 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
do { \
compiletime_assert_atomic_type(*p); \
switch (sizeof(*p)) { \
+ case 1: \
+ asm volatile ("stlrb %w1, %0" \
+ : "=Q" (*p) : "r" (v) : "memory"); \
+ break; \
+ case 2: \
+ asm volatile ("stlrh %w1, %0" \
+ : "=Q" (*p) : "r" (v) : "memory"); \
+ break; \
case 4: \
asm volatile ("stlr %w1, %0" \
: "=Q" (*p) : "r" (v) : "memory"); \
typeof(*p) ___p1; \
compiletime_assert_atomic_type(*p); \
switch (sizeof(*p)) { \
+ case 1: \
+ asm volatile ("ldarb %w0, %1" \
+ : "=r" (___p1) : "Q" (*p) : "memory"); \
+ break; \
+ case 2: \
+ asm volatile ("ldarh %w0, %1" \
+ : "=r" (___p1) : "Q" (*p) : "memory"); \
+ break; \
case 4: \
asm volatile ("ldar %w0, %1" \
: "=r" (___p1) : "Q" (*p) : "memory"); \
static int armpmu_device_probe(struct platform_device *pdev)
{
- int i, *irqs;
+ int i, irq, *irqs;
if (!cpu_pmu)
return -ENODEV;
if (!irqs)
return -ENOMEM;
+ /* Don't bother with PPIs; they're already affine */
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0 && irq_is_percpu(irq))
+ return 0;
+
for (i = 0; i < pdev->num_resources; ++i) {
struct device_node *dn;
int cpu;
i);
if (!dn) {
pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
- of_node_full_name(dn), i);
+ of_node_full_name(pdev->dev.of_node), i);
break;
}
*ret_page = phys_to_page(phys);
ptr = (void *)val;
- if (flags & __GFP_ZERO)
- memset(ptr, 0, size);
+ memset(ptr, 0, size);
}
return ptr;
struct page *page;
void *addr;
- size = PAGE_ALIGN(size);
page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT,
get_order(size));
if (!page)
*dma_handle = phys_to_dma(dev, page_to_phys(page));
addr = page_address(page);
- if (flags & __GFP_ZERO)
- memset(addr, 0, size);
+ memset(addr, 0, size);
return addr;
} else {
return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
{
void *swiotlb_addr = phys_to_virt(dma_to_phys(dev, dma_handle));
+ size = PAGE_ALIGN(size);
+
if (!is_device_dma_coherent(dev)) {
if (__free_from_pool(vaddr, size))
return;
/*
* For flush_tlb_others()
*/
-static volatile cpumask_t flush_cpumask;
+static cpumask_t flush_cpumask;
static struct mm_struct *flush_mm;
static struct vm_area_struct *flush_vma;
static volatile unsigned long flush_va;
*/
send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0);
- while (!cpumask_empty((cpumask_t*)&flush_cpumask)) {
+ while (!cpumask_empty(&flush_cpumask)) {
/* nothing. lockup detection does not belong here */
mb();
}
__flush_tlb_page(va);
}
}
- cpumask_clear_cpu(cpu_id, (cpumask_t*)&flush_cpumask);
+ cpumask_clear_cpu(cpu_id, &flush_cpumask);
}
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
#define TM_CAUSE_RESCHED 0xde
#define TM_CAUSE_TLBI 0xdc
#define TM_CAUSE_FAC_UNAV 0xda
-#define TM_CAUSE_SYSCALL 0xd8
+#define TM_CAUSE_SYSCALL 0xd8 /* future use */
#define TM_CAUSE_MISC 0xd6 /* future use */
#define TM_CAUSE_SIGNAL 0xd4
#define TM_CAUSE_ALIGNMENT 0xd2
eeh_unfreeze_pe(pe, false);
eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev);
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
break;
case pcie_hot_reset:
+ eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
eeh_ops->reset(pe, EEH_RESET_HOT);
break;
case pcie_warm_reset:
+ eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
break;
default:
- eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED | EEH_PE_CFG_BLOCKED);
return -EINVAL;
};
if (!edev || !eeh_enabled())
return;
+ if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
+ return;
+
/* USB Bus children of PCI devices will not have BUID's */
phb = edev->phb;
if (NULL == phb ||
return;
}
+ if (eeh_has_flag(EEH_PROBE_MODE_DEV))
+ eeh_ops->probe(pdn, NULL);
+
/*
* The EEH cache might not be removed correctly because of
* unbalanced kref to the device during unplug time, which
#include <asm/ftrace.h>
#include <asm/hw_irq.h>
#include <asm/context_tracking.h>
-#include <asm/tm.h>
/*
* System calls.
andi. r11,r10,_TIF_SYSCALL_DOTRACE
bne syscall_dotrace
.Lsyscall_dotrace_cont:
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-BEGIN_FTR_SECTION
- b 1f
-END_FTR_SECTION_IFCLR(CPU_FTR_TM)
- extrdi. r11, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */
- beq+ 1f
-
- /* Doom the transaction and don't perform the syscall: */
- mfmsr r11
- li r12, 1
- rldimi r11, r12, MSR_TM_LG, 63-MSR_TM_LG
- mtmsrd r11, 0
- li r11, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT)
- TABORT(R11)
-
- b .Lsyscall_exit
-1:
-#endif
cmpldi 0,r0,NR_syscalls
bge- syscall_enosys
CHECK_HMI_INTERRUPT
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
ld r1,PACAR1(r13)
+ ld r6,_CCR(r1)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
+ mtcr r6
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid
#include <linux/err.h>
#include <linux/gfp.h>
#include <linux/anon_inodes.h>
+#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <asm/kvm_book3s.h>
#include <asm/xics.h>
#include <asm/debug.h>
#include <asm/time.h>
-#include <asm/spinlock.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
hose->last_busno = 0xff;
}
hose->private_data = phb;
- hose->controller_ops = pnv_pci_controller_ops;
phb->hub_id = hub_id;
phb->opal_id = phb_id;
phb->type = ioda_type;
pnv_pci_controller_ops.enable_device_hook = pnv_pci_enable_device_hook;
pnv_pci_controller_ops.window_alignment = pnv_pci_window_alignment;
pnv_pci_controller_ops.reset_secondary_bus = pnv_pci_reset_secondary_bus;
+ hose->controller_ops = pnv_pci_controller_ops;
#ifdef CONFIG_PCI_IOV
ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;
if (rc)
return -EINVAL;
+ rc = dlpar_acquire_drc(drc_index);
+ if (rc)
+ return -EINVAL;
+
parent = of_find_node_by_path("/cpus");
if (!parent)
return -ENODEV;
of_node_put(parent);
- rc = dlpar_acquire_drc(drc_index);
- if (rc) {
- dlpar_free_cc_nodes(dn);
- return -EINVAL;
- }
-
rc = dlpar_attach_node(dn);
if (rc) {
dlpar_release_drc(drc_index);
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
- select HAVE_BPF_JIT if PACK_STACK && HAVE_MARCH_Z9_109_FEATURES
+ select HAVE_BPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
select HAVE_CMPXCHG_DOUBLE
select HAVE_CMPXCHG_LOCAL
select HAVE_DEBUG_KMEMLEAK
*
* Support for s390 cryptographic instructions.
*
- * Copyright IBM Corp. 2003, 2007
+ * Copyright IBM Corp. 2003, 2015
* Author(s): Thomas Spatzier
* Jan Glauber (jan.glauber@de.ibm.com)
+ * Harald Freudenberger (freude@de.ibm.com)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
#define CRYPT_S390_MSA 0x1
#define CRYPT_S390_MSA3 0x2
#define CRYPT_S390_MSA4 0x4
+#define CRYPT_S390_MSA5 0x8
/* s390 cryptographic operations */
enum crypt_s390_operations {
- CRYPT_S390_KM = 0x0100,
- CRYPT_S390_KMC = 0x0200,
- CRYPT_S390_KIMD = 0x0300,
- CRYPT_S390_KLMD = 0x0400,
- CRYPT_S390_KMAC = 0x0500,
- CRYPT_S390_KMCTR = 0x0600
+ CRYPT_S390_KM = 0x0100,
+ CRYPT_S390_KMC = 0x0200,
+ CRYPT_S390_KIMD = 0x0300,
+ CRYPT_S390_KLMD = 0x0400,
+ CRYPT_S390_KMAC = 0x0500,
+ CRYPT_S390_KMCTR = 0x0600,
+ CRYPT_S390_PPNO = 0x0700
};
/*
KMAC_TDEA_192 = CRYPT_S390_KMAC | 3
};
+/*
+ * function codes for PPNO (PERFORM PSEUDORANDOM NUMBER
+ * OPERATION) instruction
+ */
+enum crypt_s390_ppno_func {
+ PPNO_QUERY = CRYPT_S390_PPNO | 0,
+ PPNO_SHA512_DRNG_GEN = CRYPT_S390_PPNO | 3,
+ PPNO_SHA512_DRNG_SEED = CRYPT_S390_PPNO | 0x83
+};
+
/**
* crypt_s390_km:
* @func: the function code passed to KM; see crypt_s390_km_func
int ret;
asm volatile(
- "0: .insn rre,0xb92e0000,%3,%1 \n" /* KM opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb92e0000,%3,%1\n" /* KM opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest)
: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
int ret;
asm volatile(
- "0: .insn rre,0xb92f0000,%3,%1 \n" /* KMC opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb92f0000,%3,%1\n" /* KMC opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest)
: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
int ret;
asm volatile(
- "0: .insn rre,0xb93e0000,%1,%1 \n" /* KIMD opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb93e0000,%1,%1\n" /* KIMD opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len)
: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
int ret;
asm volatile(
- "0: .insn rre,0xb93f0000,%1,%1 \n" /* KLMD opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb93f0000,%1,%1\n" /* KLMD opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len)
: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
int ret;
asm volatile(
- "0: .insn rre,0xb91e0000,%1,%1 \n" /* KLAC opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb91e0000,%1,%1\n" /* KLAC opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len)
: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
int ret = -1;
asm volatile(
- "0: .insn rrf,0xb92d0000,%3,%1,%4,0 \n" /* KMCTR opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rrf,0xb92d0000,%3,%1,%4,0\n" /* KMCTR opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "+d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest),
"+a" (__ctr)
: "d" (__func), "a" (__param) : "cc", "memory");
return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len;
}
+/**
+ * crypt_s390_ppno:
+ * @func: the function code passed to PPNO; see crypt_s390_ppno_func
+ * @param: address of parameter block; see POP for details on each func
+ * @dest: address of destination memory area
+ * @dest_len: size of destination memory area in bytes
+ * @seed: address of seed data
+ * @seed_len: size of seed data in bytes
+ *
+ * Executes the PPNO (PERFORM PSEUDORANDOM NUMBER OPERATION)
+ * operation of the CPU.
+ *
+ * Returns -1 for failure, 0 for the query func, number of random
+ * bytes stored in dest buffer for generate function
+ */
+static inline int crypt_s390_ppno(long func, void *param,
+ u8 *dest, long dest_len,
+ const u8 *seed, long seed_len)
+{
+ register long __func asm("0") = func & CRYPT_S390_FUNC_MASK;
+ register void *__param asm("1") = param; /* param block (240 bytes) */
+ register u8 *__dest asm("2") = dest; /* buf for recv random bytes */
+ register long __dest_len asm("3") = dest_len; /* requested random bytes */
+ register const u8 *__seed asm("4") = seed; /* buf with seed data */
+ register long __seed_len asm("5") = seed_len; /* bytes in seed buf */
+ int ret = -1;
+
+ asm volatile (
+ "0: .insn rre,0xb93c0000,%1,%5\n" /* PPNO opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
+ " la %0,0\n"
+ "2:\n"
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
+ : "+d" (ret), "+a"(__dest), "+d"(__dest_len)
+ : "d"(__func), "a"(__param), "a"(__seed), "d"(__seed_len)
+ : "cc", "memory");
+ if (ret < 0)
+ return ret;
+ return (func & CRYPT_S390_FUNC_MASK) ? dest_len - __dest_len : 0;
+}
+
/**
* crypt_s390_func_available:
* @func: the function code of the specific function; 0 if op in general
return 0;
if (facility_mask & CRYPT_S390_MSA4 && !test_facility(77))
return 0;
+ if (facility_mask & CRYPT_S390_MSA5 && !test_facility(57))
+ return 0;
+
switch (func & CRYPT_S390_OP_MASK) {
case CRYPT_S390_KM:
ret = crypt_s390_km(KM_QUERY, &status, NULL, NULL, 0);
ret = crypt_s390_kmac(KMAC_QUERY, &status, NULL, 0);
break;
case CRYPT_S390_KMCTR:
- ret = crypt_s390_kmctr(KMCTR_QUERY, &status, NULL, NULL, 0,
- NULL);
+ ret = crypt_s390_kmctr(KMCTR_QUERY, &status,
+ NULL, NULL, 0, NULL);
+ break;
+ case CRYPT_S390_PPNO:
+ ret = crypt_s390_ppno(PPNO_QUERY, &status,
+ NULL, 0, NULL, 0);
break;
default:
return 0;
int ret = -1;
asm volatile(
- "0: .insn rre,0xb92c0000,0,0 \n" /* PCC opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb92c0000,0,0\n" /* PCC opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "+d" (ret)
: "d" (__func), "a" (__param) : "cc", "memory");
return ret;
}
-
#endif /* _CRYPTO_ARCH_S390_CRYPT_S390_H */
/*
- * Copyright IBM Corp. 2006, 2007
+ * Copyright IBM Corp. 2006, 2015
* Author(s): Jan Glauber <jan.glauber@de.ibm.com>
+ * Harald Freudenberger <freude@de.ibm.com>
* Driver for the s390 pseudo random number generator
*/
+
+#define KMSG_COMPONENT "prng"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/fs.h>
+#include <linux/fips.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/device.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/mutex.h>
#include <linux/random.h>
#include <linux/slab.h>
#include <asm/debug.h>
#include <asm/uaccess.h>
+#include <asm/timex.h>
#include "crypt_s390.h"
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jan Glauber <jan.glauber@de.ibm.com>");
+MODULE_AUTHOR("IBM Corporation");
MODULE_DESCRIPTION("s390 PRNG interface");
-static int prng_chunk_size = 256;
-module_param(prng_chunk_size, int, S_IRUSR | S_IRGRP | S_IROTH);
+
+#define PRNG_MODE_AUTO 0
+#define PRNG_MODE_TDES 1
+#define PRNG_MODE_SHA512 2
+
+static unsigned int prng_mode = PRNG_MODE_AUTO;
+module_param_named(mode, prng_mode, int, 0);
+MODULE_PARM_DESC(prng_mode, "PRNG mode: 0 - auto, 1 - TDES, 2 - SHA512");
+
+
+#define PRNG_CHUNKSIZE_TDES_MIN 8
+#define PRNG_CHUNKSIZE_TDES_MAX (64*1024)
+#define PRNG_CHUNKSIZE_SHA512_MIN 64
+#define PRNG_CHUNKSIZE_SHA512_MAX (64*1024)
+
+static unsigned int prng_chunk_size = 256;
+module_param_named(chunksize, prng_chunk_size, int, 0);
MODULE_PARM_DESC(prng_chunk_size, "PRNG read chunk size in bytes");
-static int prng_entropy_limit = 4096;
-module_param(prng_entropy_limit, int, S_IRUSR | S_IRGRP | S_IROTH | S_IWUSR);
-MODULE_PARM_DESC(prng_entropy_limit,
- "PRNG add entropy after that much bytes were produced");
+
+#define PRNG_RESEED_LIMIT_TDES 4096
+#define PRNG_RESEED_LIMIT_TDES_LOWER 4096
+#define PRNG_RESEED_LIMIT_SHA512 100000
+#define PRNG_RESEED_LIMIT_SHA512_LOWER 10000
+
+static unsigned int prng_reseed_limit;
+module_param_named(reseed_limit, prng_reseed_limit, int, 0);
+MODULE_PARM_DESC(prng_reseed_limit, "PRNG reseed limit");
+
/*
* Any one who considers arithmetical methods of producing random digits is,
* of course, in a state of sin. -- John von Neumann
*/
-struct s390_prng_data {
- unsigned long count; /* how many bytes were produced */
- char *buf;
+static int prng_errorflag;
+
+#define PRNG_GEN_ENTROPY_FAILED 1
+#define PRNG_SELFTEST_FAILED 2
+#define PRNG_INSTANTIATE_FAILED 3
+#define PRNG_SEED_FAILED 4
+#define PRNG_RESEED_FAILED 5
+#define PRNG_GEN_FAILED 6
+
+struct prng_ws_s {
+ u8 parm_block[32];
+ u32 reseed_counter;
+ u64 byte_counter;
};
-static struct s390_prng_data *p;
+struct ppno_ws_s {
+ u32 res;
+ u32 reseed_counter;
+ u64 stream_bytes;
+ u8 V[112];
+ u8 C[112];
+};
-/* copied from libica, use a non-zero initial parameter block */
-static unsigned char parm_block[32] = {
-0x0F,0x2B,0x8E,0x63,0x8C,0x8E,0xD2,0x52,0x64,0xB7,0xA0,0x7B,0x75,0x28,0xB8,0xF4,
-0x75,0x5F,0xD2,0xA6,0x8D,0x97,0x11,0xFF,0x49,0xD8,0x23,0xF3,0x7E,0x21,0xEC,0xA0,
+struct prng_data_s {
+ struct mutex mutex;
+ union {
+ struct prng_ws_s prngws;
+ struct ppno_ws_s ppnows;
+ };
+ u8 *buf;
+ u32 rest;
+ u8 *prev;
};
-static int prng_open(struct inode *inode, struct file *file)
+static struct prng_data_s *prng_data;
+
+/* initial parameter block for tdes mode, copied from libica */
+static const u8 initial_parm_block[32] __initconst = {
+ 0x0F, 0x2B, 0x8E, 0x63, 0x8C, 0x8E, 0xD2, 0x52,
+ 0x64, 0xB7, 0xA0, 0x7B, 0x75, 0x28, 0xB8, 0xF4,
+ 0x75, 0x5F, 0xD2, 0xA6, 0x8D, 0x97, 0x11, 0xFF,
+ 0x49, 0xD8, 0x23, 0xF3, 0x7E, 0x21, 0xEC, 0xA0 };
+
+
+/*** helper functions ***/
+
+static int generate_entropy(u8 *ebuf, size_t nbytes)
{
- return nonseekable_open(inode, file);
+ int n, ret = 0;
+ u8 *pg, *h, hash[32];
+
+ pg = (u8 *) __get_free_page(GFP_KERNEL);
+ if (!pg) {
+ prng_errorflag = PRNG_GEN_ENTROPY_FAILED;
+ return -ENOMEM;
+ }
+
+ while (nbytes) {
+ /* fill page with urandom bytes */
+ get_random_bytes(pg, PAGE_SIZE);
+ /* exor page with stckf values */
+ for (n = 0; n < sizeof(PAGE_SIZE/sizeof(u64)); n++) {
+ u64 *p = ((u64 *)pg) + n;
+ *p ^= get_tod_clock_fast();
+ }
+ n = (nbytes < sizeof(hash)) ? nbytes : sizeof(hash);
+ if (n < sizeof(hash))
+ h = hash;
+ else
+ h = ebuf;
+ /* generate sha256 from this page */
+ if (crypt_s390_kimd(KIMD_SHA_256, h,
+ pg, PAGE_SIZE) != PAGE_SIZE) {
+ prng_errorflag = PRNG_GEN_ENTROPY_FAILED;
+ ret = -EIO;
+ goto out;
+ }
+ if (n < sizeof(hash))
+ memcpy(ebuf, hash, n);
+ ret += n;
+ ebuf += n;
+ nbytes -= n;
+ }
+
+out:
+ free_page((unsigned long)pg);
+ return ret;
}
-static void prng_add_entropy(void)
+
+/*** tdes functions ***/
+
+static void prng_tdes_add_entropy(void)
{
__u64 entropy[4];
unsigned int i;
int ret;
for (i = 0; i < 16; i++) {
- ret = crypt_s390_kmc(KMC_PRNG, parm_block, (char *)entropy,
- (char *)entropy, sizeof(entropy));
+ ret = crypt_s390_kmc(KMC_PRNG, prng_data->prngws.parm_block,
+ (char *)entropy, (char *)entropy,
+ sizeof(entropy));
BUG_ON(ret < 0 || ret != sizeof(entropy));
- memcpy(parm_block, entropy, sizeof(entropy));
+ memcpy(prng_data->prngws.parm_block, entropy, sizeof(entropy));
}
}
-static void prng_seed(int nbytes)
+
+static void prng_tdes_seed(int nbytes)
{
char buf[16];
int i = 0;
- BUG_ON(nbytes > 16);
+ BUG_ON(nbytes > sizeof(buf));
+
get_random_bytes(buf, nbytes);
/* Add the entropy */
while (nbytes >= 8) {
- *((__u64 *)parm_block) ^= *((__u64 *)(buf+i));
- prng_add_entropy();
+ *((__u64 *)prng_data->prngws.parm_block) ^= *((__u64 *)(buf+i));
+ prng_tdes_add_entropy();
i += 8;
nbytes -= 8;
}
- prng_add_entropy();
+ prng_tdes_add_entropy();
+ prng_data->prngws.reseed_counter = 0;
+}
+
+
+static int __init prng_tdes_instantiate(void)
+{
+ int datalen;
+
+ pr_debug("prng runs in TDES mode with "
+ "chunksize=%d and reseed_limit=%u\n",
+ prng_chunk_size, prng_reseed_limit);
+
+ /* memory allocation, prng_data struct init, mutex init */
+ datalen = sizeof(struct prng_data_s) + prng_chunk_size;
+ prng_data = kzalloc(datalen, GFP_KERNEL);
+ if (!prng_data) {
+ prng_errorflag = PRNG_INSTANTIATE_FAILED;
+ return -ENOMEM;
+ }
+ mutex_init(&prng_data->mutex);
+ prng_data->buf = ((u8 *)prng_data) + sizeof(struct prng_data_s);
+ memcpy(prng_data->prngws.parm_block, initial_parm_block, 32);
+
+ /* initialize the PRNG, add 128 bits of entropy */
+ prng_tdes_seed(16);
+
+ return 0;
}
-static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes,
- loff_t *ppos)
+
+static void prng_tdes_deinstantiate(void)
+{
+ pr_debug("The prng module stopped "
+ "after running in triple DES mode\n");
+ kzfree(prng_data);
+}
+
+
+/*** sha512 functions ***/
+
+static int __init prng_sha512_selftest(void)
{
- int chunk, n;
+ /* NIST DRBG testvector for Hash Drbg, Sha-512, Count #0 */
+ static const u8 seed[] __initconst = {
+ 0x6b, 0x50, 0xa7, 0xd8, 0xf8, 0xa5, 0x5d, 0x7a,
+ 0x3d, 0xf8, 0xbb, 0x40, 0xbc, 0xc3, 0xb7, 0x22,
+ 0xd8, 0x70, 0x8d, 0xe6, 0x7f, 0xda, 0x01, 0x0b,
+ 0x03, 0xc4, 0xc8, 0x4d, 0x72, 0x09, 0x6f, 0x8c,
+ 0x3e, 0xc6, 0x49, 0xcc, 0x62, 0x56, 0xd9, 0xfa,
+ 0x31, 0xdb, 0x7a, 0x29, 0x04, 0xaa, 0xf0, 0x25 };
+ static const u8 V0[] __initconst = {
+ 0x00, 0xad, 0xe3, 0x6f, 0x9a, 0x01, 0xc7, 0x76,
+ 0x61, 0x34, 0x35, 0xf5, 0x4e, 0x24, 0x74, 0x22,
+ 0x21, 0x9a, 0x29, 0x89, 0xc7, 0x93, 0x2e, 0x60,
+ 0x1e, 0xe8, 0x14, 0x24, 0x8d, 0xd5, 0x03, 0xf1,
+ 0x65, 0x5d, 0x08, 0x22, 0x72, 0xd5, 0xad, 0x95,
+ 0xe1, 0x23, 0x1e, 0x8a, 0xa7, 0x13, 0xd9, 0x2b,
+ 0x5e, 0xbc, 0xbb, 0x80, 0xab, 0x8d, 0xe5, 0x79,
+ 0xab, 0x5b, 0x47, 0x4e, 0xdd, 0xee, 0x6b, 0x03,
+ 0x8f, 0x0f, 0x5c, 0x5e, 0xa9, 0x1a, 0x83, 0xdd,
+ 0xd3, 0x88, 0xb2, 0x75, 0x4b, 0xce, 0x83, 0x36,
+ 0x57, 0x4b, 0xf1, 0x5c, 0xca, 0x7e, 0x09, 0xc0,
+ 0xd3, 0x89, 0xc6, 0xe0, 0xda, 0xc4, 0x81, 0x7e,
+ 0x5b, 0xf9, 0xe1, 0x01, 0xc1, 0x92, 0x05, 0xea,
+ 0xf5, 0x2f, 0xc6, 0xc6, 0xc7, 0x8f, 0xbc, 0xf4 };
+ static const u8 C0[] __initconst = {
+ 0x00, 0xf4, 0xa3, 0xe5, 0xa0, 0x72, 0x63, 0x95,
+ 0xc6, 0x4f, 0x48, 0xd0, 0x8b, 0x5b, 0x5f, 0x8e,
+ 0x6b, 0x96, 0x1f, 0x16, 0xed, 0xbc, 0x66, 0x94,
+ 0x45, 0x31, 0xd7, 0x47, 0x73, 0x22, 0xa5, 0x86,
+ 0xce, 0xc0, 0x4c, 0xac, 0x63, 0xb8, 0x39, 0x50,
+ 0xbf, 0xe6, 0x59, 0x6c, 0x38, 0x58, 0x99, 0x1f,
+ 0x27, 0xa7, 0x9d, 0x71, 0x2a, 0xb3, 0x7b, 0xf9,
+ 0xfb, 0x17, 0x86, 0xaa, 0x99, 0x81, 0xaa, 0x43,
+ 0xe4, 0x37, 0xd3, 0x1e, 0x6e, 0xe5, 0xe6, 0xee,
+ 0xc2, 0xed, 0x95, 0x4f, 0x53, 0x0e, 0x46, 0x8a,
+ 0xcc, 0x45, 0xa5, 0xdb, 0x69, 0x0d, 0x81, 0xc9,
+ 0x32, 0x92, 0xbc, 0x8f, 0x33, 0xe6, 0xf6, 0x09,
+ 0x7c, 0x8e, 0x05, 0x19, 0x0d, 0xf1, 0xb6, 0xcc,
+ 0xf3, 0x02, 0x21, 0x90, 0x25, 0xec, 0xed, 0x0e };
+ static const u8 random[] __initconst = {
+ 0x95, 0xb7, 0xf1, 0x7e, 0x98, 0x02, 0xd3, 0x57,
+ 0x73, 0x92, 0xc6, 0xa9, 0xc0, 0x80, 0x83, 0xb6,
+ 0x7d, 0xd1, 0x29, 0x22, 0x65, 0xb5, 0xf4, 0x2d,
+ 0x23, 0x7f, 0x1c, 0x55, 0xbb, 0x9b, 0x10, 0xbf,
+ 0xcf, 0xd8, 0x2c, 0x77, 0xa3, 0x78, 0xb8, 0x26,
+ 0x6a, 0x00, 0x99, 0x14, 0x3b, 0x3c, 0x2d, 0x64,
+ 0x61, 0x1e, 0xee, 0xb6, 0x9a, 0xcd, 0xc0, 0x55,
+ 0x95, 0x7c, 0x13, 0x9e, 0x8b, 0x19, 0x0c, 0x7a,
+ 0x06, 0x95, 0x5f, 0x2c, 0x79, 0x7c, 0x27, 0x78,
+ 0xde, 0x94, 0x03, 0x96, 0xa5, 0x01, 0xf4, 0x0e,
+ 0x91, 0x39, 0x6a, 0xcf, 0x8d, 0x7e, 0x45, 0xeb,
+ 0xdb, 0xb5, 0x3b, 0xbf, 0x8c, 0x97, 0x52, 0x30,
+ 0xd2, 0xf0, 0xff, 0x91, 0x06, 0xc7, 0x61, 0x19,
+ 0xae, 0x49, 0x8e, 0x7f, 0xbc, 0x03, 0xd9, 0x0f,
+ 0x8e, 0x4c, 0x51, 0x62, 0x7a, 0xed, 0x5c, 0x8d,
+ 0x42, 0x63, 0xd5, 0xd2, 0xb9, 0x78, 0x87, 0x3a,
+ 0x0d, 0xe5, 0x96, 0xee, 0x6d, 0xc7, 0xf7, 0xc2,
+ 0x9e, 0x37, 0xee, 0xe8, 0xb3, 0x4c, 0x90, 0xdd,
+ 0x1c, 0xf6, 0xa9, 0xdd, 0xb2, 0x2b, 0x4c, 0xbd,
+ 0x08, 0x6b, 0x14, 0xb3, 0x5d, 0xe9, 0x3d, 0xa2,
+ 0xd5, 0xcb, 0x18, 0x06, 0x69, 0x8c, 0xbd, 0x7b,
+ 0xbb, 0x67, 0xbf, 0xe3, 0xd3, 0x1f, 0xd2, 0xd1,
+ 0xdb, 0xd2, 0xa1, 0xe0, 0x58, 0xa3, 0xeb, 0x99,
+ 0xd7, 0xe5, 0x1f, 0x1a, 0x93, 0x8e, 0xed, 0x5e,
+ 0x1c, 0x1d, 0xe2, 0x3a, 0x6b, 0x43, 0x45, 0xd3,
+ 0x19, 0x14, 0x09, 0xf9, 0x2f, 0x39, 0xb3, 0x67,
+ 0x0d, 0x8d, 0xbf, 0xb6, 0x35, 0xd8, 0xe6, 0xa3,
+ 0x69, 0x32, 0xd8, 0x10, 0x33, 0xd1, 0x44, 0x8d,
+ 0x63, 0xb4, 0x03, 0xdd, 0xf8, 0x8e, 0x12, 0x1b,
+ 0x6e, 0x81, 0x9a, 0xc3, 0x81, 0x22, 0x6c, 0x13,
+ 0x21, 0xe4, 0xb0, 0x86, 0x44, 0xf6, 0x72, 0x7c,
+ 0x36, 0x8c, 0x5a, 0x9f, 0x7a, 0x4b, 0x3e, 0xe2 };
+
int ret = 0;
- int tmp;
+ u8 buf[sizeof(random)];
+ struct ppno_ws_s ws;
+
+ memset(&ws, 0, sizeof(ws));
+
+ /* initial seed */
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_SEED,
+ &ws, NULL, 0,
+ seed, sizeof(seed));
+ if (ret < 0) {
+ pr_err("The prng self test seed operation for the "
+ "SHA-512 mode failed with rc=%d\n", ret);
+ prng_errorflag = PRNG_SELFTEST_FAILED;
+ return -EIO;
+ }
+
+ /* check working states V and C */
+ if (memcmp(ws.V, V0, sizeof(V0)) != 0
+ || memcmp(ws.C, C0, sizeof(C0)) != 0) {
+ pr_err("The prng self test state test "
+ "for the SHA-512 mode failed\n");
+ prng_errorflag = PRNG_SELFTEST_FAILED;
+ return -EIO;
+ }
+
+ /* generate random bytes */
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+ &ws, buf, sizeof(buf),
+ NULL, 0);
+ if (ret < 0) {
+ pr_err("The prng self test generate operation for "
+ "the SHA-512 mode failed with rc=%d\n", ret);
+ prng_errorflag = PRNG_SELFTEST_FAILED;
+ return -EIO;
+ }
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+ &ws, buf, sizeof(buf),
+ NULL, 0);
+ if (ret < 0) {
+ pr_err("The prng self test generate operation for "
+ "the SHA-512 mode failed with rc=%d\n", ret);
+ prng_errorflag = PRNG_SELFTEST_FAILED;
+ return -EIO;
+ }
+
+ /* check against expected data */
+ if (memcmp(buf, random, sizeof(random)) != 0) {
+ pr_err("The prng self test data test "
+ "for the SHA-512 mode failed\n");
+ prng_errorflag = PRNG_SELFTEST_FAILED;
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
+static int __init prng_sha512_instantiate(void)
+{
+ int ret, datalen;
+ u8 seed[64];
+
+ pr_debug("prng runs in SHA-512 mode "
+ "with chunksize=%d and reseed_limit=%u\n",
+ prng_chunk_size, prng_reseed_limit);
+
+ /* memory allocation, prng_data struct init, mutex init */
+ datalen = sizeof(struct prng_data_s) + prng_chunk_size;
+ if (fips_enabled)
+ datalen += prng_chunk_size;
+ prng_data = kzalloc(datalen, GFP_KERNEL);
+ if (!prng_data) {
+ prng_errorflag = PRNG_INSTANTIATE_FAILED;
+ return -ENOMEM;
+ }
+ mutex_init(&prng_data->mutex);
+ prng_data->buf = ((u8 *)prng_data) + sizeof(struct prng_data_s);
+
+ /* selftest */
+ ret = prng_sha512_selftest();
+ if (ret)
+ goto outfree;
+
+ /* generate initial seed bytestring, first 48 bytes of entropy */
+ ret = generate_entropy(seed, 48);
+ if (ret != 48)
+ goto outfree;
+ /* followed by 16 bytes of unique nonce */
+ get_tod_clock_ext(seed + 48);
+
+ /* initial seed of the ppno drng */
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_SEED,
+ &prng_data->ppnows, NULL, 0,
+ seed, sizeof(seed));
+ if (ret < 0) {
+ prng_errorflag = PRNG_SEED_FAILED;
+ ret = -EIO;
+ goto outfree;
+ }
+
+ /* if fips mode is enabled, generate a first block of random
+ bytes for the FIPS 140-2 Conditional Self Test */
+ if (fips_enabled) {
+ prng_data->prev = prng_data->buf + prng_chunk_size;
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+ &prng_data->ppnows,
+ prng_data->prev,
+ prng_chunk_size,
+ NULL, 0);
+ if (ret < 0 || ret != prng_chunk_size) {
+ prng_errorflag = PRNG_GEN_FAILED;
+ ret = -EIO;
+ goto outfree;
+ }
+ }
+
+ return 0;
+
+outfree:
+ kfree(prng_data);
+ return ret;
+}
+
+
+static void prng_sha512_deinstantiate(void)
+{
+ pr_debug("The prng module stopped after running in SHA-512 mode\n");
+ kzfree(prng_data);
+}
+
+
+static int prng_sha512_reseed(void)
+{
+ int ret;
+ u8 seed[32];
+
+ /* generate 32 bytes of fresh entropy */
+ ret = generate_entropy(seed, sizeof(seed));
+ if (ret != sizeof(seed))
+ return ret;
+
+ /* do a reseed of the ppno drng with this bytestring */
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_SEED,
+ &prng_data->ppnows, NULL, 0,
+ seed, sizeof(seed));
+ if (ret) {
+ prng_errorflag = PRNG_RESEED_FAILED;
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
+static int prng_sha512_generate(u8 *buf, size_t nbytes)
+{
+ int ret;
+
+ /* reseed needed ? */
+ if (prng_data->ppnows.reseed_counter > prng_reseed_limit) {
+ ret = prng_sha512_reseed();
+ if (ret)
+ return ret;
+ }
+
+ /* PPNO generate */
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+ &prng_data->ppnows, buf, nbytes,
+ NULL, 0);
+ if (ret < 0 || ret != nbytes) {
+ prng_errorflag = PRNG_GEN_FAILED;
+ return -EIO;
+ }
+
+ /* FIPS 140-2 Conditional Self Test */
+ if (fips_enabled) {
+ if (!memcmp(prng_data->prev, buf, nbytes)) {
+ prng_errorflag = PRNG_GEN_FAILED;
+ return -EILSEQ;
+ }
+ memcpy(prng_data->prev, buf, nbytes);
+ }
+
+ return ret;
+}
+
+
+/*** file io functions ***/
+
+static int prng_open(struct inode *inode, struct file *file)
+{
+ return nonseekable_open(inode, file);
+}
+
+
+static ssize_t prng_tdes_read(struct file *file, char __user *ubuf,
+ size_t nbytes, loff_t *ppos)
+{
+ int chunk, n, tmp, ret = 0;
+
+ /* lock prng_data struct */
+ if (mutex_lock_interruptible(&prng_data->mutex))
+ return -ERESTARTSYS;
- /* nbytes can be arbitrary length, we split it into chunks */
while (nbytes) {
- /* same as in extract_entropy_user in random.c */
if (need_resched()) {
if (signal_pending(current)) {
if (ret == 0)
ret = -ERESTARTSYS;
break;
}
+ /* give mutex free before calling schedule() */
+ mutex_unlock(&prng_data->mutex);
schedule();
+ /* occopy mutex again */
+ if (mutex_lock_interruptible(&prng_data->mutex)) {
+ if (ret == 0)
+ ret = -ERESTARTSYS;
+ return ret;
+ }
}
/*
/* PRNG only likes multiples of 8 bytes */
n = (chunk + 7) & -8;
- if (p->count > prng_entropy_limit)
- prng_seed(8);
+ if (prng_data->prngws.reseed_counter > prng_reseed_limit)
+ prng_tdes_seed(8);
/* if the CPU supports PRNG stckf is present too */
- asm volatile(".insn s,0xb27c0000,%0"
- : "=m" (*((unsigned long long *)p->buf)) : : "cc");
+ *((unsigned long long *)prng_data->buf) = get_tod_clock_fast();
/*
* Beside the STCKF the input for the TDES-EDE is the output
* Note: you can still get strict X9.17 conformity by setting
* prng_chunk_size to 8 bytes.
*/
- tmp = crypt_s390_kmc(KMC_PRNG, parm_block, p->buf, p->buf, n);
- BUG_ON((tmp < 0) || (tmp != n));
+ tmp = crypt_s390_kmc(KMC_PRNG, prng_data->prngws.parm_block,
+ prng_data->buf, prng_data->buf, n);
+ if (tmp < 0 || tmp != n) {
+ ret = -EIO;
+ break;
+ }
- p->count += n;
+ prng_data->prngws.byte_counter += n;
+ prng_data->prngws.reseed_counter += n;
- if (copy_to_user(ubuf, p->buf, chunk))
+ if (copy_to_user(ubuf, prng_data->buf, chunk))
return -EFAULT;
nbytes -= chunk;
ret += chunk;
ubuf += chunk;
}
+
+ /* unlock prng_data struct */
+ mutex_unlock(&prng_data->mutex);
+
return ret;
}
-static const struct file_operations prng_fops = {
+
+static ssize_t prng_sha512_read(struct file *file, char __user *ubuf,
+ size_t nbytes, loff_t *ppos)
+{
+ int n, ret = 0;
+ u8 *p;
+
+ /* if errorflag is set do nothing and return 'broken pipe' */
+ if (prng_errorflag)
+ return -EPIPE;
+
+ /* lock prng_data struct */
+ if (mutex_lock_interruptible(&prng_data->mutex))
+ return -ERESTARTSYS;
+
+ while (nbytes) {
+ if (need_resched()) {
+ if (signal_pending(current)) {
+ if (ret == 0)
+ ret = -ERESTARTSYS;
+ break;
+ }
+ /* give mutex free before calling schedule() */
+ mutex_unlock(&prng_data->mutex);
+ schedule();
+ /* occopy mutex again */
+ if (mutex_lock_interruptible(&prng_data->mutex)) {
+ if (ret == 0)
+ ret = -ERESTARTSYS;
+ return ret;
+ }
+ }
+ if (prng_data->rest) {
+ /* push left over random bytes from the previous read */
+ p = prng_data->buf + prng_chunk_size - prng_data->rest;
+ n = (nbytes < prng_data->rest) ?
+ nbytes : prng_data->rest;
+ prng_data->rest -= n;
+ } else {
+ /* generate one chunk of random bytes into read buf */
+ p = prng_data->buf;
+ n = prng_sha512_generate(p, prng_chunk_size);
+ if (n < 0) {
+ ret = n;
+ break;
+ }
+ if (nbytes < prng_chunk_size) {
+ n = nbytes;
+ prng_data->rest = prng_chunk_size - n;
+ } else {
+ n = prng_chunk_size;
+ prng_data->rest = 0;
+ }
+ }
+ if (copy_to_user(ubuf, p, n)) {
+ ret = -EFAULT;
+ break;
+ }
+ ubuf += n;
+ nbytes -= n;
+ ret += n;
+ }
+
+ /* unlock prng_data struct */
+ mutex_unlock(&prng_data->mutex);
+
+ return ret;
+}
+
+
+/*** sysfs stuff ***/
+
+static const struct file_operations prng_sha512_fops = {
+ .owner = THIS_MODULE,
+ .open = &prng_open,
+ .release = NULL,
+ .read = &prng_sha512_read,
+ .llseek = noop_llseek,
+};
+static const struct file_operations prng_tdes_fops = {
.owner = THIS_MODULE,
.open = &prng_open,
.release = NULL,
- .read = &prng_read,
+ .read = &prng_tdes_read,
.llseek = noop_llseek,
};
-static struct miscdevice prng_dev = {
+static struct miscdevice prng_sha512_dev = {
+ .name = "prandom",
+ .minor = MISC_DYNAMIC_MINOR,
+ .fops = &prng_sha512_fops,
+};
+static struct miscdevice prng_tdes_dev = {
.name = "prandom",
.minor = MISC_DYNAMIC_MINOR,
- .fops = &prng_fops,
+ .fops = &prng_tdes_fops,
};
+
+/* chunksize attribute (ro) */
+static ssize_t prng_chunksize_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%u\n", prng_chunk_size);
+}
+static DEVICE_ATTR(chunksize, 0444, prng_chunksize_show, NULL);
+
+/* counter attribute (ro) */
+static ssize_t prng_counter_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ u64 counter;
+
+ if (mutex_lock_interruptible(&prng_data->mutex))
+ return -ERESTARTSYS;
+ if (prng_mode == PRNG_MODE_SHA512)
+ counter = prng_data->ppnows.stream_bytes;
+ else
+ counter = prng_data->prngws.byte_counter;
+ mutex_unlock(&prng_data->mutex);
+
+ return snprintf(buf, PAGE_SIZE, "%llu\n", counter);
+}
+static DEVICE_ATTR(byte_counter, 0444, prng_counter_show, NULL);
+
+/* errorflag attribute (ro) */
+static ssize_t prng_errorflag_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", prng_errorflag);
+}
+static DEVICE_ATTR(errorflag, 0444, prng_errorflag_show, NULL);
+
+/* mode attribute (ro) */
+static ssize_t prng_mode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ if (prng_mode == PRNG_MODE_TDES)
+ return snprintf(buf, PAGE_SIZE, "TDES\n");
+ else
+ return snprintf(buf, PAGE_SIZE, "SHA512\n");
+}
+static DEVICE_ATTR(mode, 0444, prng_mode_show, NULL);
+
+/* reseed attribute (w) */
+static ssize_t prng_reseed_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ if (mutex_lock_interruptible(&prng_data->mutex))
+ return -ERESTARTSYS;
+ prng_sha512_reseed();
+ mutex_unlock(&prng_data->mutex);
+
+ return count;
+}
+static DEVICE_ATTR(reseed, 0200, NULL, prng_reseed_store);
+
+/* reseed limit attribute (rw) */
+static ssize_t prng_reseed_limit_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%u\n", prng_reseed_limit);
+}
+static ssize_t prng_reseed_limit_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned limit;
+
+ if (sscanf(buf, "%u\n", &limit) != 1)
+ return -EINVAL;
+
+ if (prng_mode == PRNG_MODE_SHA512) {
+ if (limit < PRNG_RESEED_LIMIT_SHA512_LOWER)
+ return -EINVAL;
+ } else {
+ if (limit < PRNG_RESEED_LIMIT_TDES_LOWER)
+ return -EINVAL;
+ }
+
+ prng_reseed_limit = limit;
+
+ return count;
+}
+static DEVICE_ATTR(reseed_limit, 0644,
+ prng_reseed_limit_show, prng_reseed_limit_store);
+
+/* strength attribute (ro) */
+static ssize_t prng_strength_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "256\n");
+}
+static DEVICE_ATTR(strength, 0444, prng_strength_show, NULL);
+
+static struct attribute *prng_sha512_dev_attrs[] = {
+ &dev_attr_errorflag.attr,
+ &dev_attr_chunksize.attr,
+ &dev_attr_byte_counter.attr,
+ &dev_attr_mode.attr,
+ &dev_attr_reseed.attr,
+ &dev_attr_reseed_limit.attr,
+ &dev_attr_strength.attr,
+ NULL
+};
+static struct attribute *prng_tdes_dev_attrs[] = {
+ &dev_attr_chunksize.attr,
+ &dev_attr_byte_counter.attr,
+ &dev_attr_mode.attr,
+ NULL
+};
+
+static struct attribute_group prng_sha512_dev_attr_group = {
+ .attrs = prng_sha512_dev_attrs
+};
+static struct attribute_group prng_tdes_dev_attr_group = {
+ .attrs = prng_tdes_dev_attrs
+};
+
+
+/*** module init and exit ***/
+
static int __init prng_init(void)
{
int ret;
if (!crypt_s390_func_available(KMC_PRNG, CRYPT_S390_MSA))
return -EOPNOTSUPP;
- if (prng_chunk_size < 8)
- return -EINVAL;
+ /* choose prng mode */
+ if (prng_mode != PRNG_MODE_TDES) {
+ /* check for MSA5 support for PPNO operations */
+ if (!crypt_s390_func_available(PPNO_SHA512_DRNG_GEN,
+ CRYPT_S390_MSA5)) {
+ if (prng_mode == PRNG_MODE_SHA512) {
+ pr_err("The prng module cannot "
+ "start in SHA-512 mode\n");
+ return -EOPNOTSUPP;
+ }
+ prng_mode = PRNG_MODE_TDES;
+ } else
+ prng_mode = PRNG_MODE_SHA512;
+ }
- p = kmalloc(sizeof(struct s390_prng_data), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
- p->count = 0;
+ if (prng_mode == PRNG_MODE_SHA512) {
- p->buf = kmalloc(prng_chunk_size, GFP_KERNEL);
- if (!p->buf) {
- ret = -ENOMEM;
- goto out_free;
- }
+ /* SHA512 mode */
- /* initialize the PRNG, add 128 bits of entropy */
- prng_seed(16);
+ if (prng_chunk_size < PRNG_CHUNKSIZE_SHA512_MIN
+ || prng_chunk_size > PRNG_CHUNKSIZE_SHA512_MAX)
+ return -EINVAL;
+ prng_chunk_size = (prng_chunk_size + 0x3f) & ~0x3f;
- ret = misc_register(&prng_dev);
- if (ret)
- goto out_buf;
- return 0;
+ if (prng_reseed_limit == 0)
+ prng_reseed_limit = PRNG_RESEED_LIMIT_SHA512;
+ else if (prng_reseed_limit < PRNG_RESEED_LIMIT_SHA512_LOWER)
+ return -EINVAL;
+
+ ret = prng_sha512_instantiate();
+ if (ret)
+ goto out;
+
+ ret = misc_register(&prng_sha512_dev);
+ if (ret) {
+ prng_sha512_deinstantiate();
+ goto out;
+ }
+ ret = sysfs_create_group(&prng_sha512_dev.this_device->kobj,
+ &prng_sha512_dev_attr_group);
+ if (ret) {
+ misc_deregister(&prng_sha512_dev);
+ prng_sha512_deinstantiate();
+ goto out;
+ }
-out_buf:
- kfree(p->buf);
-out_free:
- kfree(p);
+ } else {
+
+ /* TDES mode */
+
+ if (prng_chunk_size < PRNG_CHUNKSIZE_TDES_MIN
+ || prng_chunk_size > PRNG_CHUNKSIZE_TDES_MAX)
+ return -EINVAL;
+ prng_chunk_size = (prng_chunk_size + 0x07) & ~0x07;
+
+ if (prng_reseed_limit == 0)
+ prng_reseed_limit = PRNG_RESEED_LIMIT_TDES;
+ else if (prng_reseed_limit < PRNG_RESEED_LIMIT_TDES_LOWER)
+ return -EINVAL;
+
+ ret = prng_tdes_instantiate();
+ if (ret)
+ goto out;
+
+ ret = misc_register(&prng_tdes_dev);
+ if (ret) {
+ prng_tdes_deinstantiate();
+ goto out;
+ }
+ ret = sysfs_create_group(&prng_tdes_dev.this_device->kobj,
+ &prng_tdes_dev_attr_group);
+ if (ret) {
+ misc_deregister(&prng_tdes_dev);
+ prng_tdes_deinstantiate();
+ goto out;
+ }
+
+ }
+
+out:
return ret;
}
+
static void __exit prng_exit(void)
{
- /* wipe me */
- kzfree(p->buf);
- kfree(p);
-
- misc_deregister(&prng_dev);
+ if (prng_mode == PRNG_MODE_SHA512) {
+ sysfs_remove_group(&prng_sha512_dev.this_device->kobj,
+ &prng_sha512_dev_attr_group);
+ misc_deregister(&prng_sha512_dev);
+ prng_sha512_deinstantiate();
+ } else {
+ sysfs_remove_group(&prng_tdes_dev.this_device->kobj,
+ &prng_tdes_dev_attr_group);
+ misc_deregister(&prng_tdes_dev);
+ prng_tdes_deinstantiate();
+ }
}
+
module_init(prng_init);
module_exit(prng_exit);
/* Not more than 2GB */
#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
+/* Allocate control page with GFP_DMA */
+#define KEXEC_CONTROL_MEMORY_GFP GFP_DMA
+
/* Maximum address we can use for the crash control pages */
#define KEXEC_CRASH_CONTROL_MEMORY_LIMIT (-1UL)
unsigned long asce_bits;
unsigned long asce_limit;
unsigned long vdso_base;
- /* The mmu context has extended page tables. */
+ /* The mmu context allocates 4K page tables. */
+ unsigned int alloc_pgste:1;
+ /* The mmu context uses extended page tables. */
unsigned int has_pgste:1;
/* The mmu context uses storage keys. */
unsigned int use_skey:1;
mm->context.flush_mm = 0;
mm->context.asce_bits = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS;
mm->context.asce_bits |= _ASCE_TYPE_REGION3;
+#ifdef CONFIG_PGSTE
+ mm->context.alloc_pgste = page_table_allocate_pgste;
mm->context.has_pgste = 0;
mm->context.use_skey = 0;
+#endif
mm->context.asce_limit = STACK_TOP_MAX;
crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
return 0;
unsigned long *page_table_alloc(struct mm_struct *);
void page_table_free(struct mm_struct *, unsigned long *);
void page_table_free_rcu(struct mmu_gather *, unsigned long *, unsigned long);
+extern int page_table_allocate_pgste;
int set_guest_storage_key(struct mm_struct *mm, unsigned long addr,
unsigned long key, bool nq);
#define _ASM_S390_PGTABLE_H
/*
- * The Linux memory management assumes a three-level page table setup. For
- * s390 31 bit we "fold" the mid level into the top-level page table, so
- * that we physically have the same two-level page table as the s390 mmu
- * expects in 31 bit mode. For s390 64 bit we use three of the five levels
- * the hardware provides (region first and region second tables are not
- * used).
+ * The Linux memory management assumes a three-level page table setup.
+ * For s390 64 bit we use up to four of the five levels the hardware
+ * provides (region first tables are not used).
*
* The "pgd_xxx()" functions are trivial for a folded two-level
* setup: the pgd is never bad, and a pmd always exists (as it's folded
#ifndef __ASSEMBLY__
/*
- * The vmalloc and module area will always be on the topmost area of the kernel
- * mapping. We reserve 96MB (31bit) / 128GB (64bit) for vmalloc and modules.
+ * The vmalloc and module area will always be on the topmost area of the
+ * kernel mapping. We reserve 128GB (64bit) for vmalloc and modules.
* On 64 bit kernels we have a 2GB area at the top of the vmalloc area where
* modules will reside. That makes sure that inter module branches always
* happen without trampolines and in addition the placement within a 2GB frame
}
/*
- * A 31 bit pagetable entry of S390 has following format:
- * | PFRA | | OS |
- * 0 0IP0
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * I Page-Invalid Bit: Page is not available for address-translation
- * P Page-Protection Bit: Store access not possible for page
- *
- * A 31 bit segmenttable entry of S390 has following format:
- * | P-table origin | |PTL
- * 0 IC
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * I Segment-Invalid Bit: Segment is not available for address-translation
- * C Common-Segment Bit: Segment is not private (PoP 3-30)
- * PTL Page-Table-Length: Page-table length (PTL+1*16 entries -> up to 256)
- *
- * The 31 bit segmenttable origin of S390 has following format:
- *
- * |S-table origin | | STL |
- * X **GPS
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * X Space-Switch event:
- * G Segment-Invalid Bit: *
- * P Private-Space Bit: Segment is not private (PoP 3-30)
- * S Storage-Alteration:
- * STL Segment-Table-Length: Segment-table length (STL+1*16 entries -> up to 2048)
- *
* A 64 bit pagetable entry of S390 has following format:
* | PFRA |0IPC| OS |
* 0000000000111111111122222222223333333333444444444455555555556666
/* Software bits in the page table entry */
#define _PAGE_PRESENT 0x001 /* SW pte present bit */
-#define _PAGE_TYPE 0x002 /* SW pte type bit */
#define _PAGE_YOUNG 0x004 /* SW pte young bit */
#define _PAGE_DIRTY 0x008 /* SW pte dirty bit */
#define _PAGE_READ 0x010 /* SW pte read bit */
* table lock held.
*
* The following table gives the different possible bit combinations for
- * the pte hardware and software bits in the last 12 bits of a pte:
+ * the pte hardware and software bits in the last 12 bits of a pte
+ * (. unassigned bit, x don't care, t swap type):
*
* 842100000000
* 000084210000
* 000000008421
- * .IR...wrdytp
- * empty .10...000000
- * swap .10...xxxx10
- * file .11...xxxxx0
- * prot-none, clean, old .11...000001
- * prot-none, clean, young .11...000101
- * prot-none, dirty, old .10...001001
- * prot-none, dirty, young .10...001101
- * read-only, clean, old .11...010001
- * read-only, clean, young .01...010101
- * read-only, dirty, old .11...011001
- * read-only, dirty, young .01...011101
- * read-write, clean, old .11...110001
- * read-write, clean, young .01...110101
- * read-write, dirty, old .10...111001
- * read-write, dirty, young .00...111101
+ * .IR.uswrdy.p
+ * empty .10.00000000
+ * swap .11..ttttt.0
+ * prot-none, clean, old .11.xx0000.1
+ * prot-none, clean, young .11.xx0001.1
+ * prot-none, dirty, old .10.xx0010.1
+ * prot-none, dirty, young .10.xx0011.1
+ * read-only, clean, old .11.xx0100.1
+ * read-only, clean, young .01.xx0101.1
+ * read-only, dirty, old .11.xx0110.1
+ * read-only, dirty, young .01.xx0111.1
+ * read-write, clean, old .11.xx1100.1
+ * read-write, clean, young .01.xx1101.1
+ * read-write, dirty, old .10.xx1110.1
+ * read-write, dirty, young .00.xx1111.1
+ * HW-bits: R read-only, I invalid
+ * SW-bits: p present, y young, d dirty, r read, w write, s special,
+ * u unused, l large
*
- * pte_present is true for the bit pattern .xx...xxxxx1, (pte & 0x001) == 0x001
- * pte_none is true for the bit pattern .10...xxxx00, (pte & 0x603) == 0x400
- * pte_swap is true for the bit pattern .10...xxxx10, (pte & 0x603) == 0x402
+ * pte_none is true for the bit pattern .10.00000000, pte == 0x400
+ * pte_swap is true for the bit pattern .11..ooooo.0, (pte & 0x201) == 0x200
+ * pte_present is true for the bit pattern .xx.xxxxxx.1, (pte & 0x001) == 0x001
*/
/* Bits in the segment/region table address-space-control-element */
* read-write, dirty, young 11..0...0...11
* The segment table origin is used to distinguish empty (origin==0) from
* read-write, old segment table entries (origin!=0)
+ * HW-bits: R read-only, I invalid
+ * SW-bits: y young, d dirty, r read, w write
*/
#define _SEGMENT_ENTRY_SPLIT_BIT 11 /* THP splitting bit number */
return 0;
}
+static inline int mm_alloc_pgste(struct mm_struct *mm)
+{
+#ifdef CONFIG_PGSTE
+ if (unlikely(mm->context.alloc_pgste))
+ return 1;
+#endif
+ return 0;
+}
+
/*
* In the case that a guest uses storage keys
* faults should no longer be backed by zero pages
static inline int pte_swap(pte_t pte)
{
- /* Bit pattern: (pte & 0x603) == 0x402 */
- return (pte_val(pte) & (_PAGE_INVALID | _PAGE_PROTECT |
- _PAGE_TYPE | _PAGE_PRESENT))
- == (_PAGE_INVALID | _PAGE_TYPE);
+ /* Bit pattern: (pte & 0x201) == 0x200 */
+ return (pte_val(pte) & (_PAGE_PROTECT | _PAGE_PRESENT))
+ == _PAGE_PROTECT;
}
static inline int pte_special(pte_t pte)
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
/*
- * 31 bit swap entry format:
- * A page-table entry has some bits we have to treat in a special way.
- * Bits 0, 20 and bit 23 have to be zero, otherwise an specification
- * exception will occur instead of a page translation exception. The
- * specifiation exception has the bad habit not to store necessary
- * information in the lowcore.
- * Bits 21, 22, 30 and 31 are used to indicate the page type.
- * A swap pte is indicated by bit pattern (pte & 0x603) == 0x402
- * This leaves the bits 1-19 and bits 24-29 to store type and offset.
- * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19
- * plus 24 for the offset.
- * 0| offset |0110|o|type |00|
- * 0 0000000001111111111 2222 2 22222 33
- * 0 1234567890123456789 0123 4 56789 01
- *
* 64 bit swap entry format:
* A page-table entry has some bits we have to treat in a special way.
* Bits 52 and bit 55 have to be zero, otherwise an specification
* exception will occur instead of a page translation exception. The
* specifiation exception has the bad habit not to store necessary
* information in the lowcore.
- * Bits 53, 54, 62 and 63 are used to indicate the page type.
- * A swap pte is indicated by bit pattern (pte & 0x603) == 0x402
- * This leaves the bits 0-51 and bits 56-61 to store type and offset.
- * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51
- * plus 56 for the offset.
- * | offset |0110|o|type |00|
- * 0000000000111111111122222222223333333333444444444455 5555 5 55566 66
- * 0123456789012345678901234567890123456789012345678901 2345 6 78901 23
+ * Bits 54 and 63 are used to indicate the page type.
+ * A swap pte is indicated by bit pattern (pte & 0x201) == 0x200
+ * This leaves the bits 0-51 and bits 56-62 to store type and offset.
+ * We use the 5 bits from 57-61 for the type and the 52 bits from 0-51
+ * for the offset.
+ * | offset |01100|type |00|
+ * |0000000000111111111122222222223333333333444444444455|55555|55566|66|
+ * |0123456789012345678901234567890123456789012345678901|23456|78901|23|
*/
-#define __SWP_OFFSET_MASK (~0UL >> 11)
+#define __SWP_OFFSET_MASK ((1UL << 52) - 1)
+#define __SWP_OFFSET_SHIFT 12
+#define __SWP_TYPE_MASK ((1UL << 5) - 1)
+#define __SWP_TYPE_SHIFT 2
static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
{
pte_t pte;
- offset &= __SWP_OFFSET_MASK;
- pte_val(pte) = _PAGE_INVALID | _PAGE_TYPE | ((type & 0x1f) << 2) |
- ((offset & 1UL) << 7) | ((offset & ~1UL) << 11);
+
+ pte_val(pte) = _PAGE_INVALID | _PAGE_PROTECT;
+ pte_val(pte) |= (offset & __SWP_OFFSET_MASK) << __SWP_OFFSET_SHIFT;
+ pte_val(pte) |= (type & __SWP_TYPE_MASK) << __SWP_TYPE_SHIFT;
return pte;
}
-#define __swp_type(entry) (((entry).val >> 2) & 0x1f)
-#define __swp_offset(entry) (((entry).val >> 11) | (((entry).val >> 7) & 1))
-#define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) })
+static inline unsigned long __swp_type(swp_entry_t entry)
+{
+ return (entry.val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK;
+}
+
+static inline unsigned long __swp_offset(swp_entry_t entry)
+{
+ return (entry.val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK;
+}
+
+static inline swp_entry_t __swp_entry(unsigned long type, unsigned long offset)
+{
+ return (swp_entry_t) { pte_val(mk_swap_pte(type, offset)) };
+}
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
/*
* Convert encoding pte bits pmd bits
- * .IR...wrdytp dy..R...I...wr
- * empty .10...000000 -> 00..0...1...00
- * prot-none, clean, old .11...000001 -> 00..1...1...00
- * prot-none, clean, young .11...000101 -> 01..1...1...00
- * prot-none, dirty, old .10...001001 -> 10..1...1...00
- * prot-none, dirty, young .10...001101 -> 11..1...1...00
- * read-only, clean, old .11...010001 -> 00..1...1...01
- * read-only, clean, young .01...010101 -> 01..1...0...01
- * read-only, dirty, old .11...011001 -> 10..1...1...01
- * read-only, dirty, young .01...011101 -> 11..1...0...01
- * read-write, clean, old .11...110001 -> 00..0...1...11
- * read-write, clean, young .01...110101 -> 01..0...0...11
- * read-write, dirty, old .10...111001 -> 10..0...1...11
- * read-write, dirty, young .00...111101 -> 11..0...0...11
+ * lIR.uswrdy.p dy..R...I...wr
+ * empty 010.000000.0 -> 00..0...1...00
+ * prot-none, clean, old 111.000000.1 -> 00..1...1...00
+ * prot-none, clean, young 111.000001.1 -> 01..1...1...00
+ * prot-none, dirty, old 111.000010.1 -> 10..1...1...00
+ * prot-none, dirty, young 111.000011.1 -> 11..1...1...00
+ * read-only, clean, old 111.000100.1 -> 00..1...1...01
+ * read-only, clean, young 101.000101.1 -> 01..1...0...01
+ * read-only, dirty, old 111.000110.1 -> 10..1...1...01
+ * read-only, dirty, young 101.000111.1 -> 11..1...0...01
+ * read-write, clean, old 111.001100.1 -> 00..1...1...11
+ * read-write, clean, young 101.001101.1 -> 01..1...0...11
+ * read-write, dirty, old 110.001110.1 -> 10..0...1...11
+ * read-write, dirty, young 100.001111.1 -> 11..0...0...11
+ * HW-bits: R read-only, I invalid
+ * SW-bits: p present, y young, d dirty, r read, w write, s special,
+ * u unused, l large
*/
if (pte_present(pte)) {
pmd_val(pmd) = pte_val(pte) & PAGE_MASK;
/*
* Convert encoding pmd bits pte bits
- * dy..R...I...wr .IR...wrdytp
- * empty 00..0...1...00 -> .10...001100
- * prot-none, clean, old 00..0...1...00 -> .10...000001
- * prot-none, clean, young 01..0...1...00 -> .10...000101
- * prot-none, dirty, old 10..0...1...00 -> .10...001001
- * prot-none, dirty, young 11..0...1...00 -> .10...001101
- * read-only, clean, old 00..1...1...01 -> .11...010001
- * read-only, clean, young 01..1...1...01 -> .11...010101
- * read-only, dirty, old 10..1...1...01 -> .11...011001
- * read-only, dirty, young 11..1...1...01 -> .11...011101
- * read-write, clean, old 00..0...1...11 -> .10...110001
- * read-write, clean, young 01..0...1...11 -> .10...110101
- * read-write, dirty, old 10..0...1...11 -> .10...111001
- * read-write, dirty, young 11..0...1...11 -> .10...111101
+ * dy..R...I...wr lIR.uswrdy.p
+ * empty 00..0...1...00 -> 010.000000.0
+ * prot-none, clean, old 00..1...1...00 -> 111.000000.1
+ * prot-none, clean, young 01..1...1...00 -> 111.000001.1
+ * prot-none, dirty, old 10..1...1...00 -> 111.000010.1
+ * prot-none, dirty, young 11..1...1...00 -> 111.000011.1
+ * read-only, clean, old 00..1...1...01 -> 111.000100.1
+ * read-only, clean, young 01..1...0...01 -> 101.000101.1
+ * read-only, dirty, old 10..1...1...01 -> 111.000110.1
+ * read-only, dirty, young 11..1...0...01 -> 101.000111.1
+ * read-write, clean, old 00..1...1...11 -> 111.001100.1
+ * read-write, clean, young 01..1...0...11 -> 101.001101.1
+ * read-write, dirty, old 10..0...1...11 -> 110.001110.1
+ * read-write, dirty, young 11..0...0...11 -> 100.001111.1
+ * HW-bits: R read-only, I invalid
+ * SW-bits: p present, y young, d dirty, r read, w write, s special,
+ * u unused, l large
*/
if (pmd_present(pmd)) {
pte_val(pte) = pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN_LARGE;
pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_WRITE) << 4;
pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_INVALID) << 5;
pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_PROTECT);
- pmd_val(pmd) |= (pte_val(pte) & _PAGE_DIRTY) << 10;
- pmd_val(pmd) |= (pte_val(pte) & _PAGE_YOUNG) << 10;
+ pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_DIRTY) >> 10;
+ pte_val(pte) |= (pmd_val(pmd) & _SEGMENT_ENTRY_YOUNG) >> 10;
} else
pte_val(pte) = _PAGE_INVALID;
return pte;
#include <linux/rcupdate.h>
#include <linux/slab.h>
#include <linux/swapops.h>
+#include <linux/sysctl.h>
#include <linux/ksm.h>
#include <linux/mman.h>
}
EXPORT_SYMBOL(get_guest_storage_key);
+static int page_table_allocate_pgste_min = 0;
+static int page_table_allocate_pgste_max = 1;
+int page_table_allocate_pgste = 0;
+EXPORT_SYMBOL(page_table_allocate_pgste);
+
+static struct ctl_table page_table_sysctl[] = {
+ {
+ .procname = "allocate_pgste",
+ .data = &page_table_allocate_pgste,
+ .maxlen = sizeof(int),
+ .mode = S_IRUGO | S_IWUSR,
+ .proc_handler = proc_dointvec,
+ .extra1 = &page_table_allocate_pgste_min,
+ .extra2 = &page_table_allocate_pgste_max,
+ },
+ { }
+};
+
+static struct ctl_table page_table_sysctl_dir[] = {
+ {
+ .procname = "vm",
+ .maxlen = 0,
+ .mode = 0555,
+ .child = page_table_sysctl,
+ },
+ { }
+};
+
+static int __init page_table_register_sysctl(void)
+{
+ return register_sysctl_table(page_table_sysctl_dir) ? 0 : -ENOMEM;
+}
+__initcall(page_table_register_sysctl);
+
#else /* CONFIG_PGSTE */
static inline int page_table_with_pgste(struct page *page)
struct page *uninitialized_var(page);
unsigned int mask, bit;
- if (mm_has_pgste(mm))
+ if (mm_alloc_pgste(mm))
return page_table_alloc_pgste(mm);
/* Allocate fragments of a 4K page as 1K/2K page table */
spin_lock_bh(&mm->context.list_lock);
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-static unsigned long page_table_realloc_pmd(struct mmu_gather *tlb,
- struct mm_struct *mm, pud_t *pud,
- unsigned long addr, unsigned long end)
-{
- unsigned long next, *table, *new;
- struct page *page;
- spinlock_t *ptl;
- pmd_t *pmd;
-
- pmd = pmd_offset(pud, addr);
- do {
- next = pmd_addr_end(addr, end);
-again:
- if (pmd_none_or_clear_bad(pmd))
- continue;
- table = (unsigned long *) pmd_deref(*pmd);
- page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
- if (page_table_with_pgste(page))
- continue;
- /* Allocate new page table with pgstes */
- new = page_table_alloc_pgste(mm);
- if (!new)
- return -ENOMEM;
-
- ptl = pmd_lock(mm, pmd);
- if (likely((unsigned long *) pmd_deref(*pmd) == table)) {
- /* Nuke pmd entry pointing to the "short" page table */
- pmdp_flush_lazy(mm, addr, pmd);
- pmd_clear(pmd);
- /* Copy ptes from old table to new table */
- memcpy(new, table, PAGE_SIZE/2);
- clear_table(table, _PAGE_INVALID, PAGE_SIZE/2);
- /* Establish new table */
- pmd_populate(mm, pmd, (pte_t *) new);
- /* Free old table with rcu, there might be a walker! */
- page_table_free_rcu(tlb, table, addr);
- new = NULL;
- }
- spin_unlock(ptl);
- if (new) {
- page_table_free_pgste(new);
- goto again;
- }
- } while (pmd++, addr = next, addr != end);
-
- return addr;
-}
-
-static unsigned long page_table_realloc_pud(struct mmu_gather *tlb,
- struct mm_struct *mm, pgd_t *pgd,
- unsigned long addr, unsigned long end)
-{
- unsigned long next;
- pud_t *pud;
-
- pud = pud_offset(pgd, addr);
- do {
- next = pud_addr_end(addr, end);
- if (pud_none_or_clear_bad(pud))
- continue;
- next = page_table_realloc_pmd(tlb, mm, pud, addr, next);
- if (unlikely(IS_ERR_VALUE(next)))
- return next;
- } while (pud++, addr = next, addr != end);
-
- return addr;
-}
-
-static unsigned long page_table_realloc(struct mmu_gather *tlb, struct mm_struct *mm,
- unsigned long addr, unsigned long end)
-{
- unsigned long next;
- pgd_t *pgd;
-
- pgd = pgd_offset(mm, addr);
- do {
- next = pgd_addr_end(addr, end);
- if (pgd_none_or_clear_bad(pgd))
- continue;
- next = page_table_realloc_pud(tlb, mm, pgd, addr, next);
- if (unlikely(IS_ERR_VALUE(next)))
- return next;
- } while (pgd++, addr = next, addr != end);
-
- return 0;
-}
-
/*
* switch on pgstes for its userspace process (for kvm)
*/
int s390_enable_sie(void)
{
- struct task_struct *tsk = current;
- struct mm_struct *mm = tsk->mm;
- struct mmu_gather tlb;
+ struct mm_struct *mm = current->mm;
/* Do we have pgstes? if yes, we are done */
- if (mm_has_pgste(tsk->mm))
+ if (mm_has_pgste(mm))
return 0;
-
+ /* Fail if the page tables are 2K */
+ if (!mm_alloc_pgste(mm))
+ return -EINVAL;
down_write(&mm->mmap_sem);
+ mm->context.has_pgste = 1;
/* split thp mappings and disable thp for future mappings */
thp_split_mm(mm);
- /* Reallocate the page tables with pgstes */
- tlb_gather_mmu(&tlb, mm, 0, TASK_SIZE);
- if (!page_table_realloc(&tlb, mm, 0, TASK_SIZE))
- mm->context.has_pgste = 1;
- tlb_finish_mmu(&tlb, 0, TASK_SIZE);
up_write(&mm->mmap_sem);
- return mm->context.has_pgste ? 0 : -ENOMEM;
+ return 0;
}
EXPORT_SYMBOL_GPL(s390_enable_sie);
* though, there'll be no lowmem, so we just alloc_bootmem
* the memmap. There will be no percpu memory either.
*/
- if (i != 0 && cpumask_test_cpu(i, &isolnodes)) {
+ if (i != 0 && node_isset(i, isolnodes)) {
node_memmap_pfn[i] =
alloc_bootmem_pfn(0, memmap_size, 0);
BUG_ON(node_percpu[i] != 0);
if (!cmdline_ptr)
goto fail;
hdr->cmd_line_ptr = (unsigned long)cmdline_ptr;
+ /* Fill in upper bits of command line address, NOP on 32 bit */
+ boot_params->ext_cmd_line_ptr = (u64)(unsigned long)cmdline_ptr >> 32;
hdr->ramdisk_image = 0;
hdr->ramdisk_size = 0;
/* Recognized hypervisors */
extern const struct hypervisor_x86 x86_hyper_vmware;
extern const struct hypervisor_x86 x86_hyper_ms_hyperv;
-extern const struct hypervisor_x86 x86_hyper_xen_hvm;
+extern const struct hypervisor_x86 x86_hyper_xen;
extern const struct hypervisor_x86 x86_hyper_kvm;
extern void init_hypervisor(struct cpuinfo_x86 *c);
struct pvclock_vsyscall_time_info {
struct pvclock_vcpu_time_info pvti;
- u32 migrate_count;
} __attribute__((__aligned__(SMP_CACHE_BYTES)));
#define PVTI_SIZE sizeof(struct pvclock_vsyscall_time_info)
struct __raw_tickets tmp = READ_ONCE(lock->tickets);
tmp.head &= ~TICKET_SLOWPATH_FLAG;
- return (tmp.tail - tmp.head) > TICKET_LOCK_INC;
+ return (__ticket_t)(tmp.tail - tmp.head) > TICKET_LOCK_INC;
}
#define arch_spin_is_contended arch_spin_is_contended
return false;
}
+static inline unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+{
+ return __get_free_pages(__GFP_NOWARN, order);
+}
+
#endif /* _ASM_X86_XEN_PAGE_H */
static const __initconst struct hypervisor_x86 * const hypervisors[] =
{
-#ifdef CONFIG_XEN_PVHVM
- &x86_hyper_xen_hvm,
+#ifdef CONFIG_XEN
+ &x86_hyper_xen,
#endif
&x86_hyper_vmware,
&x86_hyper_ms_hyperv,
return x86_event_sysfs_show(page, config, event);
}
-static __initconst const struct x86_pmu core_pmu = {
- .name = "core",
- .handle_irq = x86_pmu_handle_irq,
- .disable_all = x86_pmu_disable_all,
- .enable_all = core_pmu_enable_all,
- .enable = core_pmu_enable_event,
- .disable = x86_pmu_disable_event,
- .hw_config = x86_pmu_hw_config,
- .schedule_events = x86_schedule_events,
- .eventsel = MSR_ARCH_PERFMON_EVENTSEL0,
- .perfctr = MSR_ARCH_PERFMON_PERFCTR0,
- .event_map = intel_pmu_event_map,
- .max_events = ARRAY_SIZE(intel_perfmon_event_map),
- .apic = 1,
- /*
- * Intel PMCs cannot be accessed sanely above 32 bit width,
- * so we install an artificial 1<<31 period regardless of
- * the generic event period:
- */
- .max_period = (1ULL << 31) - 1,
- .get_event_constraints = intel_get_event_constraints,
- .put_event_constraints = intel_put_event_constraints,
- .event_constraints = intel_core_event_constraints,
- .guest_get_msrs = core_guest_get_msrs,
- .format_attrs = intel_arch_formats_attr,
- .events_sysfs_show = intel_event_sysfs_show,
-};
-
struct intel_shared_regs *allocate_shared_regs(int cpu)
{
struct intel_shared_regs *regs;
NULL,
};
+static __initconst const struct x86_pmu core_pmu = {
+ .name = "core",
+ .handle_irq = x86_pmu_handle_irq,
+ .disable_all = x86_pmu_disable_all,
+ .enable_all = core_pmu_enable_all,
+ .enable = core_pmu_enable_event,
+ .disable = x86_pmu_disable_event,
+ .hw_config = x86_pmu_hw_config,
+ .schedule_events = x86_schedule_events,
+ .eventsel = MSR_ARCH_PERFMON_EVENTSEL0,
+ .perfctr = MSR_ARCH_PERFMON_PERFCTR0,
+ .event_map = intel_pmu_event_map,
+ .max_events = ARRAY_SIZE(intel_perfmon_event_map),
+ .apic = 1,
+ /*
+ * Intel PMCs cannot be accessed sanely above 32-bit width,
+ * so we install an artificial 1<<31 period regardless of
+ * the generic event period:
+ */
+ .max_period = (1ULL<<31) - 1,
+ .get_event_constraints = intel_get_event_constraints,
+ .put_event_constraints = intel_put_event_constraints,
+ .event_constraints = intel_core_event_constraints,
+ .guest_get_msrs = core_guest_get_msrs,
+ .format_attrs = intel_arch_formats_attr,
+ .events_sysfs_show = intel_event_sysfs_show,
+
+ /*
+ * Virtual (or funny metal) CPU can define x86_pmu.extra_regs
+ * together with PMU version 1 and thus be using core_pmu with
+ * shared_regs. We need following callbacks here to allocate
+ * it properly.
+ */
+ .cpu_prepare = intel_pmu_cpu_prepare,
+ .cpu_starting = intel_pmu_cpu_starting,
+ .cpu_dying = intel_pmu_cpu_dying,
+};
+
static __initconst const struct x86_pmu intel_pmu = {
.name = "Intel",
.handle_irq = intel_pmu_handle_irq,
/* Nehalem/SandBridge/Haswell uncore support */
#include "perf_event_intel_uncore.h"
+/* Uncore IMC PCI IDs */
+#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100
+#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154
+#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC 0x0150
+#define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00
+#define PCI_DEVICE_ID_INTEL_HSW_U_IMC 0x0a04
+
/* SNB event control */
#define SNB_UNC_CTL_EV_SEL_MASK 0x000000ff
#define SNB_UNC_CTL_UMASK_MASK 0x0000ff00
PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_IMC),
.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
},
+ { /* IMC */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_HSW_U_IMC),
+ .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+ },
{ /* end: all zeroes */ },
};
IMC_DEV(IVB_IMC, &ivb_uncore_pci_driver), /* 3rd Gen Core processor */
IMC_DEV(IVB_E3_IMC, &ivb_uncore_pci_driver), /* Xeon E3-1200 v2/3rd Gen Core processor */
IMC_DEV(HSW_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core Processor */
+ IMC_DEV(HSW_U_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core ULT Mobile Processor */
{ /* end marker */ }
};
.io_bitmap = { [0 ... IO_BITMAP_LONGS] = ~0 },
#endif
};
-EXPORT_PER_CPU_SYMBOL_GPL(cpu_tss);
+EXPORT_PER_CPU_SYMBOL(cpu_tss);
#ifdef CONFIG_X86_64
static DEFINE_PER_CPU(unsigned char, is_idle);
/* FPU state will be reallocated lazily at the first use. */
drop_fpu(tsk);
free_thread_xstate(tsk);
- } else if (!used_math()) {
- /* kthread execs. TODO: cleanup this horror. */
- if (WARN_ON(init_fpu(tsk)))
- force_sig(SIGKILL, tsk);
- user_fpu_begin();
+ } else {
+ if (!tsk_used_math(tsk)) {
+ /* kthread execs. TODO: cleanup this horror. */
+ if (WARN_ON(init_fpu(tsk)))
+ force_sig(SIGKILL, tsk);
+ user_fpu_begin();
+ }
restore_init_xstate();
}
}
set_normalized_timespec(ts, now.tv_sec, now.tv_nsec);
}
-static struct pvclock_vsyscall_time_info *pvclock_vdso_info;
-
-static struct pvclock_vsyscall_time_info *
-pvclock_get_vsyscall_user_time_info(int cpu)
-{
- if (!pvclock_vdso_info) {
- BUG();
- return NULL;
- }
-
- return &pvclock_vdso_info[cpu];
-}
-
-struct pvclock_vcpu_time_info *pvclock_get_vsyscall_time_info(int cpu)
-{
- return &pvclock_get_vsyscall_user_time_info(cpu)->pvti;
-}
-
#ifdef CONFIG_X86_64
-static int pvclock_task_migrate(struct notifier_block *nb, unsigned long l,
- void *v)
-{
- struct task_migration_notifier *mn = v;
- struct pvclock_vsyscall_time_info *pvti;
-
- pvti = pvclock_get_vsyscall_user_time_info(mn->from_cpu);
-
- /* this is NULL when pvclock vsyscall is not initialized */
- if (unlikely(pvti == NULL))
- return NOTIFY_DONE;
-
- pvti->migrate_count++;
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block pvclock_migrate = {
- .notifier_call = pvclock_task_migrate,
-};
-
/*
* Initialize the generic pvclock vsyscall state. This will allocate
* a/some page(s) for the per-vcpu pvclock information, set up a
WARN_ON (size != PVCLOCK_VSYSCALL_NR_PAGES*PAGE_SIZE);
- pvclock_vdso_info = i;
-
for (idx = 0; idx <= (PVCLOCK_FIXMAP_END-PVCLOCK_FIXMAP_BEGIN); idx++) {
__set_fixmap(PVCLOCK_FIXMAP_BEGIN + idx,
__pa(i) + (idx*PAGE_SIZE),
PAGE_KERNEL_VVAR);
}
-
- register_task_migration_notifier(&pvclock_migrate);
-
return 0;
}
#endif
&guest_hv_clock, sizeof(guest_hv_clock))))
return 0;
- /*
- * The interface expects us to write an even number signaling that the
- * update is finished. Since the guest won't see the intermediate
- * state, we just increase by 2 at the end.
+ /* This VCPU is paused, but it's legal for a guest to read another
+ * VCPU's kvmclock, so we really have to follow the specification where
+ * it says that version is odd if data is being modified, and even after
+ * it is consistent.
+ *
+ * Version field updates must be kept separate. This is because
+ * kvm_write_guest_cached might use a "rep movs" instruction, and
+ * writes within a string instruction are weakly ordered. So there
+ * are three writes overall.
+ *
+ * As a small optimization, only write the version field in the first
+ * and third write. The vcpu->pv_time cache is still valid, because the
+ * version field is the first in the struct.
*/
- vcpu->hv_clock.version = guest_hv_clock.version + 2;
+ BUILD_BUG_ON(offsetof(struct pvclock_vcpu_time_info, version) != 0);
+
+ vcpu->hv_clock.version = guest_hv_clock.version + 1;
+ kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
+ &vcpu->hv_clock,
+ sizeof(vcpu->hv_clock.version));
+
+ smp_wmb();
/* retain PVCLOCK_GUEST_STOPPED if set in guest copy */
pvclock_flags = (guest_hv_clock.flags & PVCLOCK_GUEST_STOPPED);
kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
&vcpu->hv_clock,
sizeof(vcpu->hv_clock));
+
+ smp_wmb();
+
+ vcpu->hv_clock.version++;
+ kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
+ &vcpu->hv_clock,
+ sizeof(vcpu->hv_clock.version));
return 0;
}
*/
void *xlate_dev_mem_ptr(phys_addr_t phys)
{
- void *addr;
- unsigned long start = phys & PAGE_MASK;
+ unsigned long start = phys & PAGE_MASK;
+ unsigned long offset = phys & ~PAGE_MASK;
+ unsigned long vaddr;
/* If page is RAM, we can use __va. Otherwise ioremap and unmap. */
if (page_is_ram(start >> PAGE_SHIFT))
return __va(phys);
- addr = (void __force *)ioremap_cache(start, PAGE_SIZE);
- if (addr)
- addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
+ vaddr = (unsigned long)ioremap_cache(start, PAGE_SIZE);
+ /* Only add the offset on success and return NULL if the ioremap() failed: */
+ if (vaddr)
+ vaddr += offset;
- return addr;
+ return (void *)vaddr;
}
void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
kfree(info);
}
+/*
+ * An IO port or MMIO resource assigned to a PCI host bridge may be
+ * consumed by the host bridge itself or available to its child
+ * bus/devices. The ACPI specification defines a bit (Producer/Consumer)
+ * to tell whether the resource is consumed by the host bridge itself,
+ * but firmware hasn't used that bit consistently, so we can't rely on it.
+ *
+ * On x86 and IA64 platforms, all IO port and MMIO resources are assumed
+ * to be available to child bus/devices except one special case:
+ * IO port [0xCF8-0xCFF] is consumed by the host bridge itself
+ * to access PCI configuration space.
+ *
+ * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
+ */
+static bool resource_is_pcicfg_ioport(struct resource *res)
+{
+ return (res->flags & IORESOURCE_IO) &&
+ res->start == 0xCF8 && res->end == 0xCFF;
+}
+
static void probe_pci_root_info(struct pci_root_info *info,
struct acpi_device *device,
int busnum, int domain,
"no IO and memory resources present in _CRS\n");
else
resource_list_for_each_entry_safe(entry, tmp, list) {
- if ((entry->res->flags & IORESOURCE_WINDOW) == 0 ||
- (entry->res->flags & IORESOURCE_DISABLED))
+ if ((entry->res->flags & IORESOURCE_DISABLED) ||
+ resource_is_pcicfg_ioport(entry->res))
resource_list_destroy_entry(entry);
else
entry->res->name = info->name;
cycle_t ret;
u64 last;
u32 version;
- u32 migrate_count;
u8 flags;
unsigned cpu, cpu1;
/*
- * When looping to get a consistent (time-info, tsc) pair, we
- * also need to deal with the possibility we can switch vcpus,
- * so make sure we always re-fetch time-info for the current vcpu.
+ * Note: hypervisor must guarantee that:
+ * 1. cpu ID number maps 1:1 to per-CPU pvclock time info.
+ * 2. that per-CPU pvclock time info is updated if the
+ * underlying CPU changes.
+ * 3. that version is increased whenever underlying CPU
+ * changes.
+ *
*/
do {
cpu = __getcpu() & VGETCPU_CPU_MASK;
* __getcpu() calls (Gleb).
*/
- /* Make sure migrate_count will change if we leave the VCPU. */
- do {
- pvti = get_pvti(cpu);
- migrate_count = pvti->migrate_count;
-
- cpu1 = cpu;
- cpu = __getcpu() & VGETCPU_CPU_MASK;
- } while (unlikely(cpu != cpu1));
+ pvti = get_pvti(cpu);
version = __pvclock_read_cycles(&pvti->pvti, &ret, &flags);
/*
* Test we're still on the cpu as well as the version.
- * - We must read TSC of pvti's VCPU.
- * - KVM doesn't follow the versioning protocol, so data could
- * change before version if we left the VCPU.
+ * We could have been migrated just after the first
+ * vgetcpu but before fetching the version, so we
+ * wouldn't notice a version change.
*/
- smp_rmb();
- } while (unlikely((pvti->pvti.version & 1) ||
- pvti->pvti.version != version ||
- pvti->migrate_count != migrate_count));
+ cpu1 = __getcpu() & VGETCPU_CPU_MASK;
+ } while (unlikely(cpu != cpu1 ||
+ (pvti->pvti.version & 1) ||
+ pvti->pvti.version != version));
if (unlikely(!(flags & PVCLOCK_TSC_STABLE_BIT)))
*mode = VCLOCK_NONE;
static void __init xen_hvm_guest_init(void)
{
+ if (xen_pv_domain())
+ return;
+
init_hvm_pv_info();
xen_hvm_init_shared_info();
xen_hvm_init_time_ops();
xen_hvm_init_mmu_ops();
}
+#endif
static bool xen_nopv = false;
static __init int xen_parse_nopv(char *arg)
}
early_param("xen_nopv", xen_parse_nopv);
-static uint32_t __init xen_hvm_platform(void)
+static uint32_t __init xen_platform(void)
{
if (xen_nopv)
return 0;
- if (xen_pv_domain())
- return 0;
-
return xen_cpuid_base();
}
}
EXPORT_SYMBOL_GPL(xen_hvm_need_lapic);
-const struct hypervisor_x86 x86_hyper_xen_hvm __refconst = {
- .name = "Xen HVM",
- .detect = xen_hvm_platform,
+static void xen_set_cpu_features(struct cpuinfo_x86 *c)
+{
+ if (xen_pv_domain())
+ clear_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
+}
+
+const struct hypervisor_x86 x86_hyper_xen = {
+ .name = "Xen",
+ .detect = xen_platform,
+#ifdef CONFIG_XEN_PVHVM
.init_platform = xen_hvm_guest_init,
+#endif
.x2apic_available = xen_x2apic_para_available,
+ .set_cpu_features = xen_set_cpu_features,
};
-EXPORT_SYMBOL(x86_hyper_xen_hvm);
-#endif
+EXPORT_SYMBOL(x86_hyper_xen);
tick_resume_local();
}
+static void xen_vcpu_notify_suspend(void *data)
+{
+ tick_suspend_local();
+}
+
void xen_arch_resume(void)
{
on_each_cpu(xen_vcpu_notify_restore, NULL, 1);
}
+
+void xen_arch_suspend(void)
+{
+ on_each_cpu(xen_vcpu_notify_suspend, NULL, 1);
+}
q->queue_lock = &q->__queue_lock;
spin_unlock_irq(lock);
+ bdi_destroy(&q->backing_dev_info);
+
/* @q is and will stay empty, shutdown and put */
blk_put_queue(q);
}
data.next = blk_rq_timeout(round_jiffies_up(data.next));
mod_timer(&q->timeout, data.next);
} else {
- queue_for_each_hw_ctx(q, hctx, i)
- blk_mq_tag_idle(hctx);
+ queue_for_each_hw_ctx(q, hctx, i) {
+ /* the hctx may be unmapped, so check it here */
+ if (blk_mq_hw_queue_mapped(hctx))
+ blk_mq_tag_idle(hctx);
+ }
}
}
spin_lock(&hctx->lock);
list_splice(&rq_list, &hctx->dispatch);
spin_unlock(&hctx->lock);
+ /*
+ * the queue is expected stopped with BLK_MQ_RQ_QUEUE_BUSY, but
+ * it's possible the queue is stopped and restarted again
+ * before this. Queue restart will dispatch requests. And since
+ * requests in rq_list aren't added into hctx->dispatch yet,
+ * the requests in rq_list might get lost.
+ *
+ * blk_mq_run_hw_queue() already checks the STOPPED bit
+ **/
+ blk_mq_run_hw_queue(hctx, true);
}
}
return NOTIFY_OK;
}
-static int blk_mq_hctx_cpu_online(struct blk_mq_hw_ctx *hctx, int cpu)
-{
- struct request_queue *q = hctx->queue;
- struct blk_mq_tag_set *set = q->tag_set;
-
- if (set->tags[hctx->queue_num])
- return NOTIFY_OK;
-
- set->tags[hctx->queue_num] = blk_mq_init_rq_map(set, hctx->queue_num);
- if (!set->tags[hctx->queue_num])
- return NOTIFY_STOP;
-
- hctx->tags = set->tags[hctx->queue_num];
- return NOTIFY_OK;
-}
-
static int blk_mq_hctx_notify(void *data, unsigned long action,
unsigned int cpu)
{
if (action == CPU_DEAD || action == CPU_DEAD_FROZEN)
return blk_mq_hctx_cpu_offline(hctx, cpu);
- else if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN)
- return blk_mq_hctx_cpu_online(hctx, cpu);
+
+ /*
+ * In case of CPU online, tags may be reallocated
+ * in blk_mq_map_swqueue() after mapping is updated.
+ */
return NOTIFY_OK;
}
unsigned int i;
struct blk_mq_hw_ctx *hctx;
struct blk_mq_ctx *ctx;
+ struct blk_mq_tag_set *set = q->tag_set;
queue_for_each_hw_ctx(q, hctx, i) {
cpumask_clear(hctx->cpumask);
* disable it and free the request entries.
*/
if (!hctx->nr_ctx) {
- struct blk_mq_tag_set *set = q->tag_set;
-
if (set->tags[i]) {
blk_mq_free_rq_map(set, set->tags[i], i);
set->tags[i] = NULL;
- hctx->tags = NULL;
}
+ hctx->tags = NULL;
continue;
}
+ /* unmapped hw queue can be remapped after CPU topo changed */
+ if (!set->tags[i])
+ set->tags[i] = blk_mq_init_rq_map(set, i);
+ hctx->tags = set->tags[i];
+ WARN_ON(!hctx->tags);
+
/*
* Set the map size to the number of mapped software queues.
* This is more accurate and more efficient than looping
*/
list_for_each_entry(q, &all_q_list, all_q_node)
blk_mq_freeze_queue_start(q);
- list_for_each_entry(q, &all_q_list, all_q_node)
+ list_for_each_entry(q, &all_q_list, all_q_node) {
blk_mq_freeze_queue_wait(q);
+ /*
+ * timeout handler can't touch hw queue during the
+ * reinitialization
+ */
+ del_timer_sync(&q->timeout);
+ }
+
list_for_each_entry(q, &all_q_list, all_q_node)
blk_mq_queue_reinit(q);
blk_trace_shutdown(q);
- bdi_destroy(&q->backing_dev_info);
-
ida_simple_remove(&blk_queue_ida, q->id);
call_rcu(&q->rcu_head, blk_free_queue_rcu);
}
if (page_to_pfn(page) <= queue_bounce_pfn(q) && !force)
continue;
- inc_zone_page_state(to->bv_page, NR_BOUNCE);
to->bv_page = mempool_alloc(pool, q->bounce_gfp);
+ inc_zone_page_state(to->bv_page, NR_BOUNCE);
if (rw == WRITE) {
char *vto, *vfrom;
eq = kzalloc_node(sizeof(*eq), GFP_KERNEL, q->node);
if (unlikely(!eq))
- goto err;
+ return NULL;
eq->type = e;
kobject_init(&eq->kobj, &elv_ktype);
hash_init(eq->hash);
return eq;
-err:
- kfree(eq);
- elevator_put(e);
- return NULL;
}
EXPORT_SYMBOL(elevator_alloc);
{"PNPb006"},
/* cs423x-pnpbios */
{"CSC0100"},
+ {"CSC0103"},
+ {"CSC0110"},
{"CSC0000"},
{"GIM0100"}, /* Guillemot Turtlebeach something appears to be cs4232 compatible */
/* es18xx-pnpbios */
* @ares: Input ACPI resource object.
* @types: Valid resource types of IORESOURCE_XXX
*
- * This is a hepler function to support acpi_dev_get_resources(), which filters
+ * This is a helper function to support acpi_dev_get_resources(), which filters
* ACPI resource objects according to resource types.
*/
int acpi_dev_filter_resource_type(struct acpi_resource *ares,
if (!sbs_manager_broken) {
result = acpi_manager_get_info(sbs);
if (!result) {
- sbs->manager_present = 0;
+ sbs->manager_present = 1;
for (id = 0; id < MAX_SBS_BAT; ++id)
if ((sbs->batteries_supported & (1 << id)))
acpi_battery_add(sbs, id);
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/dmi.h>
#include "sbshc.h"
#define PREFIX "ACPI: "
ACPI_SMB_ALARM_DATA = 0x26, /* 2 bytes alarm data */
};
+static bool macbook;
+
static inline int smb_hc_read(struct acpi_smb_hc *hc, u8 address, u8 *data)
{
return ec_read(hc->offset + address, data);
}
mutex_lock(&hc->lock);
+ if (macbook)
+ udelay(5);
if (smb_hc_read(hc, ACPI_SMB_PROTOCOL, &temp))
goto end;
if (temp) {
acpi_handle handle, acpi_ec_query_func func,
void *data);
+static int macbook_dmi_match(const struct dmi_system_id *d)
+{
+ pr_debug("Detected MacBook, enabling workaround\n");
+ macbook = true;
+ return 0;
+}
+
+static struct dmi_system_id acpi_smbus_dmi_table[] = {
+ { macbook_dmi_match, "Apple MacBook", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") },
+ },
+ { },
+};
+
static int acpi_smbus_hc_add(struct acpi_device *device)
{
int status;
unsigned long long val;
struct acpi_smb_hc *hc;
+ dmi_check_system(acpi_smbus_dmi_table);
+
if (!device)
return -EINVAL;
static void loop_remove(struct loop_device *lo)
{
- del_gendisk(lo->lo_disk);
blk_cleanup_queue(lo->lo_queue);
+ del_gendisk(lo->lo_disk);
blk_mq_free_tag_set(&lo->tag_set);
put_disk(lo->lo_disk);
kfree(lo);
static int nvme_trans_bdev_limits_page(struct nvme_ns *ns, struct sg_io_hdr *hdr,
u8 *inq_response, int alloc_len)
{
- __be32 max_sectors = cpu_to_be32(queue_max_hw_sectors(ns->queue));
+ __be32 max_sectors = cpu_to_be32(
+ nvme_block_nr(ns, queue_max_hw_sectors(ns->queue)));
__be32 max_discard = cpu_to_be32(ns->queue->limits.max_discard_sectors);
__be32 discard_desc_count = cpu_to_be32(0x100);
result, xferred);
if (!img_request->result)
img_request->result = result;
+ /*
+ * Need to end I/O on the entire obj_request worth of
+ * bytes in case of error.
+ */
+ xferred = obj_request->length;
}
/* Image object requests don't own their page array */
atomic_dec(&blkif->persistent_gnt_in_use);
}
-static void free_persistent_gnts_unmap_callback(int result,
- struct gntab_unmap_queue_data *data)
-{
- struct completion *c = data->data;
-
- /* BUG_ON used to reproduce existing behaviour,
- but is this the best way to deal with this? */
- BUG_ON(result);
- complete(c);
-}
-
static void free_persistent_gnts(struct xen_blkif *blkif, struct rb_root *root,
unsigned int num)
{
struct rb_node *n;
int segs_to_unmap = 0;
struct gntab_unmap_queue_data unmap_data;
- struct completion unmap_completion;
- init_completion(&unmap_completion);
-
- unmap_data.data = &unmap_completion;
- unmap_data.done = &free_persistent_gnts_unmap_callback;
unmap_data.pages = pages;
unmap_data.unmap_ops = unmap;
unmap_data.kunmap_ops = NULL;
!rb_next(&persistent_gnt->node)) {
unmap_data.count = segs_to_unmap;
- gnttab_unmap_refs_async(&unmap_data);
- wait_for_completion(&unmap_completion);
+ BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
put_free_pages(blkif, pages, segs_to_unmap);
segs_to_unmap = 0;
struct gnttab_unmap_grant_ref unmap[BLKIF_MAX_SEGMENTS_PER_REQUEST];
struct page *pages[BLKIF_MAX_SEGMENTS_PER_REQUEST];
struct persistent_gnt *persistent_gnt;
- int ret, segs_to_unmap = 0;
+ int segs_to_unmap = 0;
struct xen_blkif *blkif = container_of(work, typeof(*blkif), persistent_purge_work);
+ struct gntab_unmap_queue_data unmap_data;
+
+ unmap_data.pages = pages;
+ unmap_data.unmap_ops = unmap;
+ unmap_data.kunmap_ops = NULL;
while(!list_empty(&blkif->persistent_purge_list)) {
persistent_gnt = list_first_entry(&blkif->persistent_purge_list,
pages[segs_to_unmap] = persistent_gnt->page;
if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST) {
- ret = gnttab_unmap_refs(unmap, NULL, pages,
- segs_to_unmap);
- BUG_ON(ret);
+ unmap_data.count = segs_to_unmap;
+ BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
put_free_pages(blkif, pages, segs_to_unmap);
segs_to_unmap = 0;
}
kfree(persistent_gnt);
}
if (segs_to_unmap > 0) {
- ret = gnttab_unmap_refs(unmap, NULL, pages, segs_to_unmap);
- BUG_ON(ret);
+ unmap_data.count = segs_to_unmap;
+ BUG_ON(gnttab_unmap_refs_sync(&unmap_data));
put_free_pages(blkif, pages, segs_to_unmap);
}
}
return (struct zram *)dev_to_disk(dev)->private_data;
}
+static ssize_t compact_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ unsigned long nr_migrated;
+ struct zram *zram = dev_to_zram(dev);
+ struct zram_meta *meta;
+
+ down_read(&zram->init_lock);
+ if (!init_done(zram)) {
+ up_read(&zram->init_lock);
+ return -EINVAL;
+ }
+
+ meta = zram->meta;
+ nr_migrated = zs_compact(meta->mem_pool);
+ atomic64_add(nr_migrated, &zram->stats.num_migrated);
+ up_read(&zram->init_lock);
+
+ return len;
+}
+
static ssize_t disksize_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
.owner = THIS_MODULE
};
+static DEVICE_ATTR_WO(compact);
static DEVICE_ATTR_RW(disksize);
static DEVICE_ATTR_RO(initstate);
static DEVICE_ATTR_WO(reset);
&dev_attr_num_writes.attr,
&dev_attr_failed_reads.attr,
&dev_attr_failed_writes.attr,
+ &dev_attr_compact.attr,
&dev_attr_invalid_io.attr,
&dev_attr_notify_free.attr,
&dev_attr_zero_pages.attr,
* Initialise the fake PMU. We only need to populate the
* used_mask for the purposes of validation.
*/
- .used_mask = CPU_BITS_NONE,
+ .used_mask = { 0 },
};
if (!validate_event(event->pmu, &fake_pmu, leader))
/*
* OMAP L3 Interconnect error handling driver
*
- * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
* Santosh Shilimkar <santosh.shilimkar@ti.com>
* Sricharan <r.sricharan@ti.com>
*
}
static const struct of_device_id l3_noc_match[] = {
- {.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},
+ {.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data},
+ {.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data},
{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
{.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
{},
/*
* OMAP L3 Interconnect error handling driver header
*
- * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
* Santosh Shilimkar <santosh.shilimkar@ti.com>
* sricharan <r.sricharan@ti.com>
*
};
-static struct l3_target_data omap_l3_target_data_clk3[] = {
- {0x0100, "EMUSS",},
- {0x0300, "DEBUG SOURCE",},
- {0x0, "HOST CLK3",},
+static struct l3_target_data omap4_l3_target_data_clk3[] = {
+ {0x0100, "DEBUGSS",},
};
-static struct l3_flagmux_data omap_l3_flagmux_clk3 = {
+static struct l3_flagmux_data omap4_l3_flagmux_clk3 = {
.offset = 0x0200,
- .l3_targ = omap_l3_target_data_clk3,
- .num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk3),
+ .l3_targ = omap4_l3_target_data_clk3,
+ .num_targ_data = ARRAY_SIZE(omap4_l3_target_data_clk3),
};
static struct l3_masters_data omap_l3_masters[] = {
{ 0x32, "USBHOSTFS"}
};
-static struct l3_flagmux_data *omap_l3_flagmux[] = {
+static struct l3_flagmux_data *omap4_l3_flagmux[] = {
&omap_l3_flagmux_clk1,
&omap_l3_flagmux_clk2,
- &omap_l3_flagmux_clk3,
+ &omap4_l3_flagmux_clk3,
};
-static const struct omap_l3 omap_l3_data = {
- .l3_flagmux = omap_l3_flagmux,
- .num_modules = ARRAY_SIZE(omap_l3_flagmux),
+static const struct omap_l3 omap4_l3_data = {
+ .l3_flagmux = omap4_l3_flagmux,
+ .num_modules = ARRAY_SIZE(omap4_l3_flagmux),
.l3_masters = omap_l3_masters,
.num_masters = ARRAY_SIZE(omap_l3_masters),
/* The 6 MSBs of register field used to distinguish initiator */
.mst_addr_mask = 0xFC,
};
+/* OMAP5 data */
+static struct l3_target_data omap5_l3_target_data_clk3[] = {
+ {0x0100, "L3INSTR",},
+ {0x0300, "DEBUGSS",},
+ {0x0, "HOSTCLK3",},
+};
+
+static struct l3_flagmux_data omap5_l3_flagmux_clk3 = {
+ .offset = 0x0200,
+ .l3_targ = omap5_l3_target_data_clk3,
+ .num_targ_data = ARRAY_SIZE(omap5_l3_target_data_clk3),
+};
+
+static struct l3_flagmux_data *omap5_l3_flagmux[] = {
+ &omap_l3_flagmux_clk1,
+ &omap_l3_flagmux_clk2,
+ &omap5_l3_flagmux_clk3,
+};
+
+static const struct omap_l3 omap5_l3_data = {
+ .l3_flagmux = omap5_l3_flagmux,
+ .num_modules = ARRAY_SIZE(omap5_l3_flagmux),
+ .l3_masters = omap_l3_masters,
+ .num_masters = ARRAY_SIZE(omap_l3_masters),
+ /* The 6 MSBs of register field used to distinguish initiator */
+ .mst_addr_mask = 0x7E0,
+};
+
/* DRA7 data */
static struct l3_target_data dra_l3_target_data_clk1[] = {
{0x2a00, "AES1",},
static struct l3_target_data dra_l3_target_data_clk2[] = {
{0x0, "HOST CLK1",},
- {0x0, "HOST CLK2",},
+ {0x800000, "HOST CLK2",},
{0xdead, L3_TARGET_NOT_SUPPORTED,},
{0x3400, "SHA2_2",},
{0x0900, "BB2D",},
val &= ~RNG_EN;
__raw_writel(val, priv->regs + RNG_CTRL);
- clk_didsable_unprepare(prov->clk);
+ clk_disable_unprepare(priv->clk);
}
static int bcm63xx_rng_data_present(struct hwrng *rng, int wait)
priv->rng.name = pdev->name;
priv->rng.init = bcm63xx_rng_init;
priv->rng.cleanup = bcm63xx_rng_cleanup;
- prov->rng.data_present = bcm63xx_rng_data_present;
+ priv->rng.data_present = bcm63xx_rng_data_present;
priv->rng.data_read = bcm63xx_rng_data_read;
priv->clk = devm_clk_get(&pdev->dev, "ipsec");
if (IS_ERR(priv->clk)) {
- error = PTR_ERR(priv->clk);
- dev_err(&pdev->dev, "no clock for device: %d\n", error);
- return error;
+ ret = PTR_ERR(priv->clk);
+ dev_err(&pdev->dev, "no clock for device: %d\n", ret);
+ return ret;
}
if (!devm_request_mem_region(&pdev->dev, r->start,
return -ENOMEM;
}
- error = devm_hwrng_register(&pdev->dev, &priv->rng);
- if (error) {
+ ret = devm_hwrng_register(&pdev->dev, &priv->rng);
+ if (ret) {
dev_err(&pdev->dev, "failed to register rng device: %d\n",
- error);
- return error;
+ ret);
+ return ret;
}
dev_info(&pdev->dev, "registered RNG driver\n");
seq_printf(m, " %x", intf->channels[i].address);
seq_putc(m, '\n');
- return seq_has_overflowed(m);
+ return 0;
}
static int smi_ipmb_proc_open(struct inode *inode, struct file *file)
ipmi_version_major(&intf->bmc->id),
ipmi_version_minor(&intf->bmc->id));
- return seq_has_overflowed(m);
+ return 0;
}
static int smi_version_proc_open(struct inode *inode, struct file *file)
* If we are running to completion, start it and run
* transactions until everything is clear.
*/
- smi_info->curr_msg = msg;
- smi_info->waiting_msg = NULL;
+ smi_info->waiting_msg = msg;
/*
* Run to completion means we are single-threaded, no
acpi_handle handle;
acpi_status status;
unsigned long long tmp;
- int rv;
+ int rv = -EINVAL;
acpi_dev = pnp_acpi_device(dev);
if (!acpi_dev)
/* _IFT tells us the interface type: KCS, BT, etc */
status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(status)) {
+ dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n");
goto err_free;
+ }
switch (tmp) {
case 1:
info->si_type = SI_BT;
break;
case 4: /* SSIF, just ignore */
+ rv = -ENODEV;
goto err_free;
default:
dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
err_free:
kfree(info);
- return -EINVAL;
+ return rv;
}
static void ipmi_pnp_remove(struct pnp_dev *dev)
seq_printf(m, "%s\n", si_to_str[smi->si_type]);
- return seq_has_overflowed(m);
+ return 0;
}
static int smi_type_proc_open(struct inode *inode, struct file *file)
smi->irq,
smi->slave_addr);
- return seq_has_overflowed(m);
+ return 0;
}
static int smi_params_proc_open(struct inode *inode, struct file *file)
* interface into the I2C driver, I believe.
*/
-#include <linux/version.h>
#if defined(MODVERSIONS)
#include <linux/modversions.h>
#endif
/* Number of watchdog pretimeouts. */
SSIF_STAT_watchdog_pretimeouts,
+ /* Number of alers received. */
+ SSIF_STAT_alerts,
+
/* Always add statistics before this value, it must be last. */
SSIF_NUM_STATS
};
#define WDT_PRE_TIMEOUT_INT 0x08
unsigned char msg_flags;
+ u8 global_enables;
bool has_event_buffer;
+ bool supports_alert;
+
+ /*
+ * Used to tell what we should do with alerts. If we are
+ * waiting on a response, read the data immediately.
+ */
+ bool got_alert;
+ bool waiting_alert;
/*
* If set to true, this will request events the next time the
if (ssif_info->i2c_read_write == I2C_SMBUS_WRITE) {
result = i2c_smbus_write_block_data(
- ssif_info->client, SSIF_IPMI_REQUEST,
+ ssif_info->client, ssif_info->i2c_command,
ssif_info->i2c_data[0],
ssif_info->i2c_data + 1);
ssif_info->done_handler(ssif_info, result, NULL, 0);
} else {
result = i2c_smbus_read_block_data(
- ssif_info->client, SSIF_IPMI_RESPONSE,
+ ssif_info->client, ssif_info->i2c_command,
ssif_info->i2c_data);
if (result < 0)
ssif_info->done_handler(ssif_info, result,
static void msg_done_handler(struct ssif_info *ssif_info, int result,
unsigned char *data, unsigned int len);
-static void retry_timeout(unsigned long data)
+static void start_get(struct ssif_info *ssif_info)
{
- struct ssif_info *ssif_info = (void *) data;
int rv;
- if (ssif_info->stopping)
- return;
-
ssif_info->rtc_us_timer = 0;
+ ssif_info->multi_pos = 0;
rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ,
SSIF_IPMI_RESPONSE,
}
}
+static void retry_timeout(unsigned long data)
+{
+ struct ssif_info *ssif_info = (void *) data;
+ unsigned long oflags, *flags;
+ bool waiting;
+
+ if (ssif_info->stopping)
+ return;
+
+ flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+ waiting = ssif_info->waiting_alert;
+ ssif_info->waiting_alert = false;
+ ipmi_ssif_unlock_cond(ssif_info, flags);
+
+ if (waiting)
+ start_get(ssif_info);
+}
+
+
+static void ssif_alert(struct i2c_client *client, unsigned int data)
+{
+ struct ssif_info *ssif_info = i2c_get_clientdata(client);
+ unsigned long oflags, *flags;
+ bool do_get = false;
+
+ ssif_inc_stat(ssif_info, alerts);
+
+ flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+ if (ssif_info->waiting_alert) {
+ ssif_info->waiting_alert = false;
+ del_timer(&ssif_info->retry_timer);
+ do_get = true;
+ } else if (ssif_info->curr_msg) {
+ ssif_info->got_alert = true;
+ }
+ ipmi_ssif_unlock_cond(ssif_info, flags);
+ if (do_get)
+ start_get(ssif_info);
+}
+
static int start_resend(struct ssif_info *ssif_info);
static void msg_done_handler(struct ssif_info *ssif_info, int result,
if (ssif_info->retries_left > 0) {
ssif_inc_stat(ssif_info, receive_retries);
+ flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+ ssif_info->waiting_alert = true;
+ ssif_info->rtc_us_timer = SSIF_MSG_USEC;
mod_timer(&ssif_info->retry_timer,
jiffies + SSIF_MSG_JIFFIES);
- ssif_info->rtc_us_timer = SSIF_MSG_USEC;
+ ipmi_ssif_unlock_cond(ssif_info, flags);
return;
}
ssif_inc_stat(ssif_info, received_message_parts);
/* Remove the multi-part read marker. */
- for (i = 0; i < (len-2); i++)
- ssif_info->data[i] = data[i+2];
len -= 2;
+ for (i = 0; i < len; i++)
+ ssif_info->data[i] = data[i+2];
ssif_info->multi_len = len;
ssif_info->multi_pos = 1;
goto continue_op;
}
- blocknum = data[ssif_info->multi_len];
+ blocknum = data[0];
- if (ssif_info->multi_len+len-1 > IPMI_MAX_MSG_LENGTH) {
+ if (ssif_info->multi_len + len - 1 > IPMI_MAX_MSG_LENGTH) {
/* Received message too big, abort the operation. */
result = -E2BIG;
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
}
/* Remove the blocknum from the data. */
- for (i = 0; i < (len-1); i++)
- ssif_info->data[i+ssif_info->multi_len] = data[i+1];
len--;
+ for (i = 0; i < len; i++)
+ ssif_info->data[i + ssif_info->multi_len] = data[i + 1];
ssif_info->multi_len += len;
if (blocknum == 0xff) {
/* End of read */
len = ssif_info->multi_len;
data = ssif_info->data;
- } else if ((blocknum+1) != ssif_info->multi_pos) {
+ } else if (blocknum + 1 != ssif_info->multi_pos) {
/*
* Out of sequence block, just abort. Block
* numbers start at zero for the second block,
if (rv < 0) {
if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
pr_info(PFX
- "Error from i2c_non_blocking_op(2)\n");
+ "Error from ssif_i2c_send\n");
result = -EIO;
} else
}
if (ssif_info->multi_data) {
- /* In the middle of a multi-data write. */
+ /*
+ * In the middle of a multi-data write. See the comment
+ * in the SSIF_MULTI_n_PART case in the probe function
+ * for details on the intricacies of this.
+ */
int left;
ssif_inc_stat(ssif_info, sent_messages_parts);
msg_done_handler(ssif_info, -EIO, NULL, 0);
}
} else {
+ unsigned long oflags, *flags;
+ bool got_alert;
+
ssif_inc_stat(ssif_info, sent_messages);
ssif_inc_stat(ssif_info, sent_messages_parts);
- /* Wait a jiffie then request the next message */
- ssif_info->retries_left = SSIF_RECV_RETRIES;
- ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
- mod_timer(&ssif_info->retry_timer,
- jiffies + SSIF_MSG_PART_JIFFIES);
- return;
+ flags = ipmi_ssif_lock_cond(ssif_info, &oflags);
+ got_alert = ssif_info->got_alert;
+ if (got_alert) {
+ ssif_info->got_alert = false;
+ ssif_info->waiting_alert = false;
+ }
+
+ if (got_alert) {
+ ipmi_ssif_unlock_cond(ssif_info, flags);
+ /* The alert already happened, try now. */
+ retry_timeout((unsigned long) ssif_info);
+ } else {
+ /* Wait a jiffie then request the next message */
+ ssif_info->waiting_alert = true;
+ ssif_info->retries_left = SSIF_RECV_RETRIES;
+ ssif_info->rtc_us_timer = SSIF_MSG_PART_USEC;
+ mod_timer(&ssif_info->retry_timer,
+ jiffies + SSIF_MSG_PART_JIFFIES);
+ ipmi_ssif_unlock_cond(ssif_info, flags);
+ }
}
}
int rv;
int command;
+ ssif_info->got_alert = false;
+
if (ssif_info->data_len > 32) {
command = SSIF_IPMI_MULTI_PART_REQUEST_START;
ssif_info->multi_data = ssif_info->data;
return -E2BIG;
ssif_info->retries_left = SSIF_SEND_RETRIES;
- memcpy(ssif_info->data+1, data, len);
+ memcpy(ssif_info->data + 1, data, len);
ssif_info->data_len = len;
return start_resend(ssif_info);
}
{
seq_puts(m, "ssif\n");
- return seq_has_overflowed(m);
+ return 0;
}
static int smi_type_proc_open(struct inode *inode, struct file *file)
ssif_get_stat(ssif_info, events));
seq_printf(m, "watchdog_pretimeouts: %u\n",
ssif_get_stat(ssif_info, watchdog_pretimeouts));
+ seq_printf(m, "alerts: %u\n",
+ ssif_get_stat(ssif_info, alerts));
return 0;
}
.release = single_release,
};
+static int strcmp_nospace(char *s1, char *s2)
+{
+ while (*s1 && *s2) {
+ while (isspace(*s1))
+ s1++;
+ while (isspace(*s2))
+ s2++;
+ if (*s1 > *s2)
+ return 1;
+ if (*s1 < *s2)
+ return -1;
+ s1++;
+ s2++;
+ }
+ return 0;
+}
+
static struct ssif_addr_info *ssif_info_find(unsigned short addr,
char *adapter_name,
bool match_null_name)
/* One is NULL and one is not */
continue;
}
- if (strcmp(info->adapter_name, adapter_name))
- /* Names to not match */
+ if (adapter_name &&
+ strcmp_nospace(info->adapter_name,
+ adapter_name))
+ /* Names do not match */
continue;
}
found = info;
return false;
}
+/*
+ * Global enables we care about.
+ */
+#define GLOBAL_ENABLES_MASK (IPMI_BMC_EVT_MSG_BUFF | IPMI_BMC_RCV_MSG_INTR | \
+ IPMI_BMC_EVT_MSG_INTR)
+
static int ssif_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
unsigned char msg[3];
break;
case SSIF_MULTI_2_PART:
- if (ssif_info->max_xmit_msg_size > 64)
- ssif_info->max_xmit_msg_size = 64;
+ if (ssif_info->max_xmit_msg_size > 63)
+ ssif_info->max_xmit_msg_size = 63;
if (ssif_info->max_recv_msg_size > 62)
ssif_info->max_recv_msg_size = 62;
break;
case SSIF_MULTI_n_PART:
+ /*
+ * The specification is rather confusing at
+ * this point, but I think I understand what
+ * is meant. At least I have a workable
+ * solution. With multi-part messages, you
+ * cannot send a message that is a multiple of
+ * 32-bytes in length, because the start and
+ * middle messages are 32-bytes and the end
+ * message must be at least one byte. You
+ * can't fudge on an extra byte, that would
+ * screw up things like fru data writes. So
+ * we limit the length to 63 bytes. That way
+ * a 32-byte message gets sent as a single
+ * part. A larger message will be a 32-byte
+ * start and the next message is always going
+ * to be 1-31 bytes in length. Not ideal, but
+ * it should work.
+ */
+ if (ssif_info->max_xmit_msg_size > 63)
+ ssif_info->max_xmit_msg_size = 63;
break;
default:
} else {
no_support:
/* Assume no multi-part or PEC support */
- pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n",
+ pr_info(PFX "Error fetching SSIF: %d %d %2.2x, your system probably doesn't support this command so using defaults\n",
rv, len, resp[2]);
ssif_info->max_xmit_msg_size = 32;
goto found;
}
+ ssif_info->global_enables = resp[3];
+
if (resp[3] & IPMI_BMC_EVT_MSG_BUFF) {
ssif_info->has_event_buffer = true;
/* buffer is already enabled, nothing to do. */
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
- msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
+ msg[2] = ssif_info->global_enables | IPMI_BMC_EVT_MSG_BUFF;
rv = do_cmd(client, 3, msg, &len, resp);
if (rv || (len < 2)) {
- pr_warn(PFX "Error getting global enables: %d %d %2.2x\n",
+ pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
rv, len, resp[2]);
rv = 0; /* Not fatal */
goto found;
}
- if (resp[2] == 0)
+ if (resp[2] == 0) {
/* A successful return means the event buffer is supported. */
ssif_info->has_event_buffer = true;
+ ssif_info->global_enables |= IPMI_BMC_EVT_MSG_BUFF;
+ }
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+ msg[2] = ssif_info->global_enables | IPMI_BMC_RCV_MSG_INTR;
+ rv = do_cmd(client, 3, msg, &len, resp);
+ if (rv || (len < 2)) {
+ pr_warn(PFX "Error setting global enables: %d %d %2.2x\n",
+ rv, len, resp[2]);
+ rv = 0; /* Not fatal */
+ goto found;
+ }
+
+ if (resp[2] == 0) {
+ /* A successful return means the alert is supported. */
+ ssif_info->supports_alert = true;
+ ssif_info->global_enables |= IPMI_BMC_RCV_MSG_INTR;
+ }
found:
ssif_info->intf_num = atomic_inc_return(&next_intf);
},
.probe = ssif_probe,
.remove = ssif_remove,
+ .alert = ssif_alert,
.id_table = ssif_id,
.detect = ssif_detect
};
rv = new_ssif_client(addr[i], adapter_name[i],
dbg[i], slave_addrs[i],
SI_HARDCODED);
- if (!rv)
+ if (rv)
pr_err(PFX
"Couldn't add hardcoded device at addr 0x%x\n",
addr[i]);
int entered_state;
struct cpuidle_state *target_state = &drv->states[index];
+ bool broadcast = !!(target_state->flags & CPUIDLE_FLAG_TIMER_STOP);
ktime_t time_start, time_end;
s64 diff;
+ /*
+ * Tell the time framework to switch to a broadcast timer because our
+ * local timer will be shut down. If a local timer is used from another
+ * CPU as a broadcast timer, this call may fail if it is not available.
+ */
+ if (broadcast && tick_broadcast_enter())
+ return -EBUSY;
+
trace_cpu_idle_rcuidle(index, dev->cpu);
time_start = ktime_get();
time_end = ktime_get();
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
+ if (broadcast) {
+ if (WARN_ON_ONCE(!irqs_disabled()))
+ local_irq_disable();
+
+ tick_broadcast_exit();
+ }
+
if (!cpuidle_state_is_coupled(dev, drv, entered_state))
local_irq_enable();
config XGENE_DMA
tristate "APM X-Gene DMA support"
+ depends on ARCH_XGENE || COMPILE_TEST
select DMA_ENGINE
select DMA_ENGINE_RAID
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
chan = private_candidate(&mask, device, NULL, NULL);
if (chan) {
+ dma_cap_set(DMA_PRIVATE, device->cap_mask);
+ device->privatecnt++;
err = dma_chan_get(chan);
if (err) {
pr_debug("%s: failed to get %s: (%d)\n",
__func__, dma_chan_name(chan), err);
chan = NULL;
+ if (--device->privatecnt == 0)
+ dma_cap_clear(DMA_PRIVATE, device->cap_mask);
}
}
* Power management
*/
+#ifdef CONFIG_PM
static int usb_dmac_runtime_suspend(struct device *dev)
{
struct usb_dmac *dmac = dev_get_drvdata(dev);
return usb_dmac_init(dmac);
}
+#endif /* CONFIG_PM */
static const struct dev_pm_ops usb_dmac_pm = {
SET_RUNTIME_PM_OPS(usb_dmac_runtime_suspend, usb_dmac_runtime_resume,
entry = kzalloc(sizeof(*entry), GFP_KERNEL);
if (!entry) {
kset_unregister(map_kset);
- return entry;
+ map_kset = NULL;
+ return ERR_PTR(-ENOMEM);
}
memcpy(&entry->md, efi_runtime_map + nr * efi_memdesc_size,
if (ret) {
kobject_put(&entry->kobj);
kset_unregister(map_kset);
+ map_kset = NULL;
return ERR_PTR(ret);
}
entry = *(map_entries + j);
kobject_put(&entry->kobj);
}
- if (map_kset)
- kset_unregister(map_kset);
out:
return ret;
}
dev_err(bank->dev, "Could not get gpio dbck\n");
}
-static void
-omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
- unsigned int num)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
- handle_simple_irq);
- if (!gc) {
- dev_err(bank->dev, "Memory alloc failed for gc\n");
- return;
- }
-
- ct = gc->chip_types;
-
- /* NOTE: No ack required, reading IRQ status clears it. */
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->chip.irq_set_type = omap_gpio_irq_type;
-
- if (bank->regs->wkup_en)
- ct->chip.irq_set_wake = omap_gpio_wake_enable;
-
- ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
- irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-}
-
static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
{
- int j;
static int gpio;
int irq_base = 0;
int ret;
}
#endif
+ /* MPUIO is a bit different, reading IRQ status clears it */
+ if (bank->is_mpuio) {
+ irqc->irq_ack = dummy_irq_chip.irq_ack;
+ irqc->irq_mask = irq_gc_mask_set_bit;
+ irqc->irq_unmask = irq_gc_mask_clr_bit;
+ if (!bank->regs->wkup_en)
+ irqc->irq_set_wake = NULL;
+ }
+
ret = gpiochip_irqchip_add(&bank->chip, irqc,
irq_base, omap_gpio_irq_handler,
IRQ_TYPE_NONE);
gpiochip_set_chained_irqchip(&bank->chip, irqc,
bank->irq, omap_gpio_irq_handler);
- for (j = 0; j < bank->width; j++) {
- int irq = irq_find_mapping(bank->chip.irqdomain, j);
- if (bank->is_mpuio) {
- omap_mpuio_alloc_gc(bank, irq, bank->width);
- irq_set_chip_and_handler(irq, NULL, NULL);
- set_irq_flags(irq, 0);
- }
- }
-
return 0;
}
length = min(agpio->pin_table_length, (u16)(pin_index + bits));
for (i = pin_index; i < length; ++i) {
- unsigned pin = agpio->pin_table[i];
+ int pin = agpio->pin_table[i];
struct acpi_gpio_connection *conn;
struct gpio_desc *desc;
bool found;
*/
int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
{
+ struct gpio_chip *chip;
unsigned long flags;
int status;
const char *ioname = NULL;
return -EINVAL;
}
+ chip = desc->chip;
+
mutex_lock(&sysfs_lock);
+ /* check if chip is being removed */
+ if (!chip || !chip->exported) {
+ status = -ENODEV;
+ goto fail_unlock;
+ }
+
spin_lock_irqsave(&gpio_lock, flags);
if (!test_bit(FLAG_REQUESTED, &desc->flags) ||
test_bit(FLAG_EXPORT, &desc->flags)) {
{
int status;
struct device *dev;
+ struct gpio_desc *desc;
+ unsigned int i;
mutex_lock(&sysfs_lock);
dev = class_find_device(&gpio_class, NULL, chip, match_export);
if (dev) {
put_device(dev);
device_unregister(dev);
+ /* prevent further gpiod exports */
chip->exported = false;
status = 0;
} else
if (status)
chip_dbg(chip, "%s: status %d\n", __func__, status);
+
+ /* unregister gpiod class devices owned by sysfs */
+ for (i = 0; i < chip->ngpio; i++) {
+ desc = &chip->desc[i];
+ if (test_and_clear_bit(FLAG_SYSFS, &desc->flags))
+ gpiod_free(desc);
+ }
}
static int __init gpiolib_sysfs_init(void)
BUG_ON(!dqm || !qpd);
- BUG_ON(!list_empty(&qpd->queues_list));
+ pr_debug("In func %s\n", __func__);
- pr_debug("kfd: In func %s\n", __func__);
+ pr_debug("qpd->queues_list is %s\n",
+ list_empty(&qpd->queues_list) ? "empty" : "not empty");
retval = 0;
mutex_lock(&dqm->lock);
return -ENOMEM;
}
+ init_sdma_vm(dqm, q, qpd);
+
retval = mqd->init_mqd(mqd, &q->mqd, &q->mqd_mem_obj,
&q->gart_mqd_addr, &q->properties);
if (retval != 0)
sysfs_show_32bit_prop(buffer, "max_engine_clk_fcompute",
dev->gpu->kfd2kgd->get_max_engine_clock_in_mhz(
dev->gpu->kgd));
+
sysfs_show_64bit_prop(buffer, "local_mem_size",
- dev->gpu->kfd2kgd->get_vmem_size(
- dev->gpu->kgd));
+ (unsigned long long int) 0);
sysfs_show_32bit_prop(buffer, "fw_version",
dev->gpu->kfd2kgd->get_fw_version(
/* Reinitialize corresponding vblank timestamp if high-precision query
* available. Skip this step if query unsupported or failed. Will
- * reinitialize delayed at next vblank interrupt in that case.
+ * reinitialize delayed at next vblank interrupt in that case and
+ * assign 0 for now, to mark the vblanktimestamp as invalid.
*/
- if (rc) {
- tslot = atomic_read(&vblank->count) + diff;
- vblanktimestamp(dev, crtc, tslot) = t_vblank;
- }
+ tslot = atomic_read(&vblank->count) + diff;
+ vblanktimestamp(dev, crtc, tslot) = rc ? t_vblank : (struct timeval) {0, 0};
smp_mb__before_atomic();
atomic_add(diff, &vblank->count);
#define GTFIFOCTL 0x120008
#define GT_FIFO_FREE_ENTRIES_MASK 0x7f
#define GT_FIFO_NUM_RESERVED_ENTRIES 20
+#define GT_FIFO_CTL_BLOCK_ALL_POLICY_STALL (1 << 12)
+#define GT_FIFO_CTL_RC6_POLICY_STALL (1 << 11)
#define HSW_IDICR 0x9008
#define IDIHASHMSK(x) (((x) & 0x3f) << 16)
};
static struct intel_quirk intel_quirks[] = {
- /* HP Mini needs pipe A force quirk (LP: #322104) */
- { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
-
/* Toshiba Protege R-205, S-209 needs pipe A force quirk */
{ 0x2592, 0x1179, 0x0001, quirk_pipea_force },
pipe_config->has_dp_encoder = true;
pipe_config->has_drrs = false;
- pipe_config->has_audio = intel_dp->has_audio;
+ pipe_config->has_audio = intel_dp->has_audio && port != PORT_A;
if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
int dotclock;
tmp = I915_READ(intel_dp->output_reg);
- if (tmp & DP_AUDIO_OUTPUT_ENABLE)
- pipe_config->has_audio = true;
+
+ pipe_config->has_audio = tmp & DP_AUDIO_OUTPUT_ENABLE && port != PORT_A;
if ((port == PORT_A) || !HAS_PCH_CPT(dev)) {
if (tmp & DP_SYNC_HS_HIGH)
if (val == 0)
break;
- intel_dp->sink_rates[i] = val * 200;
+ /* Value read is in kHz while drm clock is saved in deca-kHz */
+ intel_dp->sink_rates[i] = (val * 200) / 10;
}
intel_dp->num_sink_rates = i;
}
static const struct dmi_system_id intel_dual_link_lvds[] = {
{
.callback = intel_dual_link_lvds_callback,
- .ident = "Apple MacBook Pro (Core i5/i7 Series)",
+ .ident = "Apple MacBook Pro 15\" (2010)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro6,2"),
+ },
+ },
+ {
+ .callback = intel_dual_link_lvds_callback,
+ .ident = "Apple MacBook Pro 15\" (2011)",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
},
},
+ {
+ .callback = intel_dual_link_lvds_callback,
+ .ident = "Apple MacBook Pro 15\" (2012)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro9,1"),
+ },
+ },
{ } /* terminating entry */
};
if (i915.lvds_channel_mode > 0)
return i915.lvds_channel_mode == 2;
+ /* single channel LVDS is limited to 112 MHz */
+ if (lvds_encoder->attached_connector->base.panel.fixed_mode->clock
+ > 112999)
+ return true;
+
if (dmi_check_system(intel_dual_link_lvds))
return true;
out:
mutex_unlock(&dev->mode_config.mutex);
+ intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
+
lvds_encoder->is_dual_link = compute_is_dual_link_lvds(lvds_encoder);
DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
lvds_encoder->is_dual_link ? "dual" : "single");
}
drm_connector_register(connector);
- intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
intel_panel_setup_backlight(connector, INVALID_PIPE);
return;
__raw_i915_write32(dev_priv, GTFIFODBG,
__raw_i915_read32(dev_priv, GTFIFODBG));
+ /* WaDisableShadowRegForCpd:chv */
+ if (IS_CHERRYVIEW(dev)) {
+ __raw_i915_write32(dev_priv, GTFIFOCTL,
+ __raw_i915_read32(dev_priv, GTFIFOCTL) |
+ GT_FIFO_CTL_BLOCK_ALL_POLICY_STALL |
+ GT_FIFO_CTL_RC6_POLICY_STALL);
+ }
+
intel_uncore_forcewake_reset(dev, restore_forcewake);
}
else
radeon_crtc->pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
+ /* if there is no audio, set MINM_OVER_MAXP */
+ if (!drm_detect_monitor_audio(radeon_connector_edid(connector)))
+ radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
if (rdev->family < CHIP_RV770)
radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
/* use frac fb div on APUs */
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
int encoder_mode = atombios_get_encoder_mode(encoder);
DRM_DEBUG_KMS("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n",
radeon_encoder->encoder_id, mode, radeon_encoder->devices,
radeon_encoder->active_device);
- if (connector && (radeon_audio != 0) &&
+ if ((radeon_audio != 0) &&
((encoder_mode == ATOM_ENCODER_MODE_HDMI) ||
- (ENCODER_MODE_IS_DP(encoder_mode) &&
- drm_detect_monitor_audio(radeon_connector_edid(connector)))))
+ ENCODER_MODE_IS_DP(encoder_mode)))
radeon_audio_dpms(encoder, mode);
switch (radeon_encoder->encoder_id) {
WREG32(DCCG_AUDIO_DTO1_MODULE, clock);
}
}
-
-void dce6_dp_enable(struct drm_encoder *encoder, bool enable)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
-
- if (!dig || !dig->afmt)
- return;
-
- if (enable) {
- WREG32(EVERGREEN_DP_SEC_TIMESTAMP + dig->afmt->offset,
- EVERGREEN_DP_SEC_TIMESTAMP_MODE(1));
- WREG32(EVERGREEN_DP_SEC_CNTL + dig->afmt->offset,
- EVERGREEN_DP_SEC_ASP_ENABLE | /* Audio packet transmission */
- EVERGREEN_DP_SEC_ATP_ENABLE | /* Audio timestamp packet transmission */
- EVERGREEN_DP_SEC_AIP_ENABLE | /* Audio infoframe packet transmission */
- EVERGREEN_DP_SEC_STREAM_ENABLE); /* Master enable for secondary stream engine */
- } else {
- WREG32(EVERGREEN_DP_SEC_CNTL + dig->afmt->offset, 0);
- }
-
- dig->afmt->enabled = enable;
-}
WREG32(AFMT_AVI_INFO3 + offset,
frame[0xC] | (frame[0xD] << 8) | (buffer[1] << 24));
- WREG32_OR(HDMI_INFOFRAME_CONTROL0 + offset,
- HDMI_AVI_INFO_SEND | /* enable AVI info frames */
- HDMI_AVI_INFO_CONT); /* required for audio info values to be updated */
-
WREG32_P(HDMI_INFOFRAME_CONTROL1 + offset,
- HDMI_AVI_INFO_LINE(2), /* anything other than 0 */
- ~HDMI_AVI_INFO_LINE_MASK);
+ HDMI_AVI_INFO_LINE(2), /* anything other than 0 */
+ ~HDMI_AVI_INFO_LINE_MASK);
}
void dce4_hdmi_audio_set_dto(struct radeon_device *rdev,
WREG32(AFMT_AUDIO_PACKET_CONTROL2 + offset,
AFMT_AUDIO_CHANNEL_ENABLE(0xff));
+ WREG32(HDMI_AUDIO_PACKET_CONTROL + offset,
+ HDMI_AUDIO_DELAY_EN(1) | /* set the default audio delay */
+ HDMI_AUDIO_PACKETS_PER_LINE(3)); /* should be suffient for all audio modes and small enough for all hblanks */
+
/* allow 60958 channel status and send audio packets fields to be updated */
- WREG32(AFMT_AUDIO_PACKET_CONTROL + offset,
- AFMT_AUDIO_SAMPLE_SEND | AFMT_RESET_FIFO_WHEN_AUDIO_DIS | AFMT_60958_CS_UPDATE);
+ WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + offset,
+ AFMT_RESET_FIFO_WHEN_AUDIO_DIS | AFMT_60958_CS_UPDATE);
}
return;
if (enable) {
- WREG32(HDMI_INFOFRAME_CONTROL1 + dig->afmt->offset,
- HDMI_AUDIO_INFO_LINE(2)); /* anything other than 0 */
-
- WREG32(HDMI_AUDIO_PACKET_CONTROL + dig->afmt->offset,
- HDMI_AUDIO_DELAY_EN(1) | /* set the default audio delay */
- HDMI_AUDIO_PACKETS_PER_LINE(3)); /* should be suffient for all audio modes and small enough for all hblanks */
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
- WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset,
- HDMI_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */
- HDMI_AUDIO_INFO_CONT); /* required for audio info values to be updated */
+ if (drm_detect_monitor_audio(radeon_connector_edid(connector))) {
+ WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset,
+ HDMI_AVI_INFO_SEND | /* enable AVI info frames */
+ HDMI_AVI_INFO_CONT | /* required for audio info values to be updated */
+ HDMI_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */
+ HDMI_AUDIO_INFO_CONT); /* required for audio info values to be updated */
+ WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
+ AFMT_AUDIO_SAMPLE_SEND);
+ } else {
+ WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset,
+ HDMI_AVI_INFO_SEND | /* enable AVI info frames */
+ HDMI_AVI_INFO_CONT); /* required for audio info values to be updated */
+ WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
+ ~AFMT_AUDIO_SAMPLE_SEND);
+ }
} else {
+ WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
+ ~AFMT_AUDIO_SAMPLE_SEND);
WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset, 0);
}
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+ struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
if (!dig || !dig->afmt)
return;
- if (enable) {
+ if (enable && drm_detect_monitor_audio(radeon_connector_edid(connector))) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
struct radeon_connector_atom_dig *dig_connector;
uint32_t val;
+ WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
+ AFMT_AUDIO_SAMPLE_SEND);
+
WREG32(EVERGREEN_DP_SEC_TIMESTAMP + dig->afmt->offset,
EVERGREEN_DP_SEC_TIMESTAMP_MODE(1));
- if (radeon_connector->con_priv) {
+ if (!ASIC_IS_DCE6(rdev) && radeon_connector->con_priv) {
dig_connector = radeon_connector->con_priv;
val = RREG32(EVERGREEN_DP_SEC_AUD_N + dig->afmt->offset);
val &= ~EVERGREEN_DP_SEC_N_BASE_MULTIPLE(0xf);
EVERGREEN_DP_SEC_STREAM_ENABLE); /* Master enable for secondary stream engine */
} else {
WREG32(EVERGREEN_DP_SEC_CNTL + dig->afmt->offset, 0);
+ WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
+ ~AFMT_AUDIO_SAMPLE_SEND);
}
dig->afmt->enabled = enable;
WREG32(HDMI0_AVI_INFO3 + offset,
frame[0xC] | (frame[0xD] << 8) | (buffer[1] << 24));
+ WREG32_OR(HDMI0_INFOFRAME_CONTROL1 + offset,
+ HDMI0_AVI_INFO_LINE(2)); /* anything other than 0 */
+
WREG32_OR(HDMI0_INFOFRAME_CONTROL0 + offset,
- HDMI0_AVI_INFO_SEND | /* enable AVI info frames */
- HDMI0_AVI_INFO_CONT); /* send AVI info frames every frame/field */
+ HDMI0_AVI_INFO_SEND | /* enable AVI info frames */
+ HDMI0_AVI_INFO_CONT); /* send AVI info frames every frame/field */
- WREG32_OR(HDMI0_INFOFRAME_CONTROL1 + offset,
- HDMI0_AVI_INFO_LINE(2)); /* anything other than 0 */
}
/*
struct radeon_bo *vcpu_bo;
void *cpu_addr;
uint64_t gpu_addr;
- void *saved_bo;
atomic_t handles[RADEON_MAX_UVD_HANDLES];
struct drm_file *filp[RADEON_MAX_UVD_HANDLES];
unsigned img_size[RADEON_MAX_UVD_HANDLES];
static struct radeon_asic_ring rv770_uvd_ring = {
.ib_execute = &uvd_v1_0_ib_execute,
.emit_fence = &uvd_v2_2_fence_emit,
- .emit_semaphore = &uvd_v1_0_semaphore_emit,
+ .emit_semaphore = &uvd_v2_2_semaphore_emit,
.cs_parse = &radeon_uvd_cs_parse,
.ring_test = &uvd_v1_0_ring_test,
.ib_test = &uvd_v1_0_ib_test,
int uvd_v2_2_resume(struct radeon_device *rdev);
void uvd_v2_2_fence_emit(struct radeon_device *rdev,
struct radeon_fence *fence);
+bool uvd_v2_2_semaphore_emit(struct radeon_device *rdev,
+ struct radeon_ring *ring,
+ struct radeon_semaphore *semaphore,
+ bool emit_wait);
/* uvd v3.1 */
bool uvd_v3_1_semaphore_emit(struct radeon_device *rdev,
void r600_hdmi_enable(struct drm_encoder *encoder, bool enable);
void evergreen_hdmi_enable(struct drm_encoder *encoder, bool enable);
void evergreen_dp_enable(struct drm_encoder *encoder, bool enable);
-void dce6_dp_enable(struct drm_encoder *encoder, bool enable);
static const u32 pin_offsets[7] =
{
.set_avi_packet = evergreen_set_avi_packet,
.set_audio_packet = dce4_set_audio_packet,
.mode_set = radeon_audio_dp_mode_set,
- .dpms = dce6_dp_enable,
+ .dpms = evergreen_dp_enable,
};
static void radeon_audio_interface_init(struct radeon_device *rdev)
if (!connector || !connector->encoder)
return;
+ if (!radeon_encoder_is_digital(connector->encoder))
+ return;
+
rdev = connector->encoder->dev->dev_private;
+
+ if (!radeon_audio_chipset_supported(rdev))
+ return;
+
radeon_encoder = to_radeon_encoder(connector->encoder);
dig = radeon_encoder->enc_priv;
- if (status == connector_status_connected) {
- struct radeon_connector *radeon_connector;
- int sink_type;
-
- if (!drm_detect_monitor_audio(radeon_connector_edid(connector))) {
- radeon_encoder->audio = NULL;
- return;
- }
+ if (!dig->afmt)
+ return;
- radeon_connector = to_radeon_connector(connector);
- sink_type = radeon_dp_getsinktype(radeon_connector);
+ if (status == connector_status_connected) {
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
- sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT)
+ radeon_dp_getsinktype(radeon_connector) ==
+ CONNECTOR_OBJECT_ID_DISPLAYPORT)
radeon_encoder->audio = rdev->audio.dp_funcs;
else
radeon_encoder->audio = rdev->audio.hdmi_funcs;
dig->afmt->pin = radeon_audio_get_pin(connector->encoder);
- radeon_audio_enable(rdev, dig->afmt->pin, 0xf);
+ if (drm_detect_monitor_audio(radeon_connector_edid(connector))) {
+ radeon_audio_enable(rdev, dig->afmt->pin, 0xf);
+ } else {
+ radeon_audio_enable(rdev, dig->afmt->pin, 0);
+ dig->afmt->pin = NULL;
+ }
} else {
radeon_audio_enable(rdev, dig->afmt->pin, 0);
dig->afmt->pin = NULL;
/* updated in get modes as well since we need to know if it's analog or digital */
radeon_connector_update_scratch_regs(connector, ret);
- if (radeon_audio != 0)
+ if (radeon_audio != 0) {
+ radeon_connector_get_edid(connector);
radeon_audio_detect(connector, ret);
+ }
exit:
pm_runtime_mark_last_busy(connector->dev->dev);
radeon_connector_update_scratch_regs(connector, ret);
- if (radeon_audio != 0)
+ if (radeon_audio != 0) {
+ radeon_connector_get_edid(connector);
radeon_audio_detect(connector, ret);
+ }
out:
pm_runtime_mark_last_busy(connector->dev->dev);
p->dma_reloc_idx = 0;
/* FIXME: we assume that each relocs use 4 dwords */
p->nrelocs = chunk->length_dw / 4;
- p->relocs = kcalloc(p->nrelocs, sizeof(struct radeon_bo_list), GFP_KERNEL);
+ p->relocs = drm_calloc_large(p->nrelocs, sizeof(struct radeon_bo_list));
if (p->relocs == NULL) {
return -ENOMEM;
}
}
}
kfree(parser->track);
- kfree(parser->relocs);
+ drm_free_large(parser->relocs);
drm_free_large(parser->vm_bos);
for (i = 0; i < parser->nchunks; i++)
drm_free_large(parser->chunks[i].kdata);
while (it) {
struct radeon_mn_node *node;
struct radeon_bo *bo;
- int r;
+ long r;
node = container_of(it, struct radeon_mn_node, it);
it = interval_tree_iter_next(it, start, end);
list_for_each_entry(bo, &node->bos, mn_list) {
+ if (!bo->tbo.ttm || bo->tbo.ttm->state != tt_bound)
+ continue;
+
r = radeon_bo_reserve(bo, true);
if (r) {
- DRM_ERROR("(%d) failed to reserve user bo\n", r);
+ DRM_ERROR("(%ld) failed to reserve user bo\n", r);
continue;
}
r = reservation_object_wait_timeout_rcu(bo->tbo.resv,
true, false, MAX_SCHEDULE_TIMEOUT);
- if (r)
- DRM_ERROR("(%d) failed to wait for user bo\n", r);
+ if (r <= 0)
+ DRM_ERROR("(%ld) failed to wait for user bo\n", r);
radeon_ttm_placement_from_domain(bo, RADEON_GEM_DOMAIN_CPU);
r = ttm_bo_validate(&bo->tbo, &bo->placement, false, false);
if (r)
- DRM_ERROR("(%d) failed to validate user bo\n", r);
+ DRM_ERROR("(%ld) failed to validate user bo\n", r);
radeon_bo_unreserve(bo);
}
{
struct radeon_device *rdev = radeon_get_rdev(ttm->bdev);
struct radeon_ttm_tt *gtt = (void *)ttm;
- struct scatterlist *sg;
- int i;
+ struct sg_page_iter sg_iter;
int write = !(gtt->userflags & RADEON_GEM_USERPTR_READONLY);
enum dma_data_direction direction = write ?
/* free the sg table and pages again */
dma_unmap_sg(rdev->dev, ttm->sg->sgl, ttm->sg->nents, direction);
- for_each_sg(ttm->sg->sgl, sg, ttm->sg->nents, i) {
- struct page *page = sg_page(sg);
-
+ for_each_sg_page(ttm->sg->sgl, &sg_iter, ttm->sg->nents, 0) {
+ struct page *page = sg_page_iter_page(&sg_iter);
if (!(gtt->userflags & RADEON_GEM_USERPTR_READONLY))
set_page_dirty(page);
int radeon_uvd_suspend(struct radeon_device *rdev)
{
- unsigned size;
- void *ptr;
- int i;
+ int i, r;
if (rdev->uvd.vcpu_bo == NULL)
return 0;
- for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i)
- if (atomic_read(&rdev->uvd.handles[i]))
- break;
+ for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
+ uint32_t handle = atomic_read(&rdev->uvd.handles[i]);
+ if (handle != 0) {
+ struct radeon_fence *fence;
- if (i == RADEON_MAX_UVD_HANDLES)
- return 0;
+ radeon_uvd_note_usage(rdev);
- size = radeon_bo_size(rdev->uvd.vcpu_bo);
- size -= rdev->uvd_fw->size;
+ r = radeon_uvd_get_destroy_msg(rdev,
+ R600_RING_TYPE_UVD_INDEX, handle, &fence);
+ if (r) {
+ DRM_ERROR("Error destroying UVD (%d)!\n", r);
+ continue;
+ }
- ptr = rdev->uvd.cpu_addr;
- ptr += rdev->uvd_fw->size;
+ radeon_fence_wait(fence, false);
+ radeon_fence_unref(&fence);
- rdev->uvd.saved_bo = kmalloc(size, GFP_KERNEL);
- memcpy(rdev->uvd.saved_bo, ptr, size);
+ rdev->uvd.filp[i] = NULL;
+ atomic_set(&rdev->uvd.handles[i], 0);
+ }
+ }
return 0;
}
ptr = rdev->uvd.cpu_addr;
ptr += rdev->uvd_fw->size;
- if (rdev->uvd.saved_bo != NULL) {
- memcpy(ptr, rdev->uvd.saved_bo, size);
- kfree(rdev->uvd.saved_bo);
- rdev->uvd.saved_bo = NULL;
- } else
- memset(ptr, 0, size);
+ memset(ptr, 0, size);
return 0;
}
return 0;
}
+static int radeon_uvd_validate_codec(struct radeon_cs_parser *p,
+ unsigned stream_type)
+{
+ switch (stream_type) {
+ case 0: /* H264 */
+ case 1: /* VC1 */
+ /* always supported */
+ return 0;
+
+ case 3: /* MPEG2 */
+ case 4: /* MPEG4 */
+ /* only since UVD 3 */
+ if (p->rdev->family >= CHIP_PALM)
+ return 0;
+
+ /* fall through */
+ default:
+ DRM_ERROR("UVD codec not supported by hardware %d!\n",
+ stream_type);
+ return -EINVAL;
+ }
+}
+
static int radeon_uvd_cs_msg(struct radeon_cs_parser *p, struct radeon_bo *bo,
unsigned offset, unsigned buf_sizes[])
{
return -EINVAL;
}
- if (msg_type == 1) {
- /* it's a decode msg, calc buffer sizes */
- r = radeon_uvd_cs_msg_decode(msg, buf_sizes);
- /* calc image size (width * height) */
- img_size = msg[6] * msg[7];
+ switch (msg_type) {
+ case 0:
+ /* it's a create msg, calc image size (width * height) */
+ img_size = msg[7] * msg[8];
+
+ r = radeon_uvd_validate_codec(p, msg[4]);
radeon_bo_kunmap(bo);
if (r)
return r;
- } else if (msg_type == 2) {
+ /* try to alloc a new handle */
+ for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
+ if (atomic_read(&p->rdev->uvd.handles[i]) == handle) {
+ DRM_ERROR("Handle 0x%x already in use!\n", handle);
+ return -EINVAL;
+ }
+
+ if (!atomic_cmpxchg(&p->rdev->uvd.handles[i], 0, handle)) {
+ p->rdev->uvd.filp[i] = p->filp;
+ p->rdev->uvd.img_size[i] = img_size;
+ return 0;
+ }
+ }
+
+ DRM_ERROR("No more free UVD handles!\n");
+ return -EINVAL;
+
+ case 1:
+ /* it's a decode msg, validate codec and calc buffer sizes */
+ r = radeon_uvd_validate_codec(p, msg[4]);
+ if (!r)
+ r = radeon_uvd_cs_msg_decode(msg, buf_sizes);
+ radeon_bo_kunmap(bo);
+ if (r)
+ return r;
+
+ /* validate the handle */
+ for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
+ if (atomic_read(&p->rdev->uvd.handles[i]) == handle) {
+ if (p->rdev->uvd.filp[i] != p->filp) {
+ DRM_ERROR("UVD handle collision detected!\n");
+ return -EINVAL;
+ }
+ return 0;
+ }
+ }
+
+ DRM_ERROR("Invalid UVD handle 0x%x!\n", handle);
+ return -ENOENT;
+
+ case 2:
/* it's a destroy msg, free the handle */
for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i)
atomic_cmpxchg(&p->rdev->uvd.handles[i], handle, 0);
radeon_bo_kunmap(bo);
return 0;
- } else {
- /* it's a create msg, calc image size (width * height) */
- img_size = msg[7] * msg[8];
- radeon_bo_kunmap(bo);
- if (msg_type != 0) {
- DRM_ERROR("Illegal UVD message type (%d)!\n", msg_type);
- return -EINVAL;
- }
-
- /* it's a create msg, no special handling needed */
- }
-
- /* create or decode, validate the handle */
- for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
- if (atomic_read(&p->rdev->uvd.handles[i]) == handle)
- return 0;
- }
+ default:
- /* handle not found try to alloc a new one */
- for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
- if (!atomic_cmpxchg(&p->rdev->uvd.handles[i], 0, handle)) {
- p->rdev->uvd.filp[i] = p->filp;
- p->rdev->uvd.img_size[i] = img_size;
- return 0;
- }
+ DRM_ERROR("Illegal UVD message type (%d)!\n", msg_type);
+ return -EINVAL;
}
- DRM_ERROR("No more free UVD handles!\n");
+ BUG();
return -EINVAL;
}
*
* @p: parser context
* @handle: handle to validate
+ * @allocated: allocated a new handle?
*
* Validates the handle and return the found session index or -EINVAL
* we we don't have another free session index.
*/
-int radeon_vce_validate_handle(struct radeon_cs_parser *p, uint32_t handle)
+static int radeon_vce_validate_handle(struct radeon_cs_parser *p,
+ uint32_t handle, bool *allocated)
{
unsigned i;
+ *allocated = false;
+
/* validate the handle */
for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i) {
- if (atomic_read(&p->rdev->vce.handles[i]) == handle)
+ if (atomic_read(&p->rdev->vce.handles[i]) == handle) {
+ if (p->rdev->vce.filp[i] != p->filp) {
+ DRM_ERROR("VCE handle collision detected!\n");
+ return -EINVAL;
+ }
return i;
+ }
}
/* handle not found try to alloc a new one */
if (!atomic_cmpxchg(&p->rdev->vce.handles[i], 0, handle)) {
p->rdev->vce.filp[i] = p->filp;
p->rdev->vce.img_size[i] = 0;
+ *allocated = true;
return i;
}
}
int radeon_vce_cs_parse(struct radeon_cs_parser *p)
{
int session_idx = -1;
- bool destroyed = false;
+ bool destroyed = false, created = false, allocated = false;
uint32_t tmp, handle = 0;
uint32_t *size = &tmp;
- int i, r;
+ int i, r = 0;
while (p->idx < p->chunk_ib->length_dw) {
uint32_t len = radeon_get_ib_value(p, p->idx);
if ((len < 8) || (len & 3)) {
DRM_ERROR("invalid VCE command length (%d)!\n", len);
- return -EINVAL;
+ r = -EINVAL;
+ goto out;
}
if (destroyed) {
DRM_ERROR("No other command allowed after destroy!\n");
- return -EINVAL;
+ r = -EINVAL;
+ goto out;
}
switch (cmd) {
case 0x00000001: // session
handle = radeon_get_ib_value(p, p->idx + 2);
- session_idx = radeon_vce_validate_handle(p, handle);
+ session_idx = radeon_vce_validate_handle(p, handle,
+ &allocated);
if (session_idx < 0)
return session_idx;
size = &p->rdev->vce.img_size[session_idx];
break;
case 0x01000001: // create
+ created = true;
+ if (!allocated) {
+ DRM_ERROR("Handle already in use!\n");
+ r = -EINVAL;
+ goto out;
+ }
+
*size = radeon_get_ib_value(p, p->idx + 8) *
radeon_get_ib_value(p, p->idx + 10) *
8 * 3 / 2;
r = radeon_vce_cs_reloc(p, p->idx + 10, p->idx + 9,
*size);
if (r)
- return r;
+ goto out;
r = radeon_vce_cs_reloc(p, p->idx + 12, p->idx + 11,
*size / 3);
if (r)
- return r;
+ goto out;
break;
case 0x02000001: // destroy
r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2,
*size * 2);
if (r)
- return r;
+ goto out;
break;
case 0x05000004: // video bitstream buffer
r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2,
tmp);
if (r)
- return r;
+ goto out;
break;
case 0x05000005: // feedback buffer
r = radeon_vce_cs_reloc(p, p->idx + 3, p->idx + 2,
4096);
if (r)
- return r;
+ goto out;
break;
default:
DRM_ERROR("invalid VCE command (0x%x)!\n", cmd);
- return -EINVAL;
+ r = -EINVAL;
+ goto out;
}
if (session_idx == -1) {
DRM_ERROR("no session command at start of IB\n");
- return -EINVAL;
+ r = -EINVAL;
+ goto out;
}
p->idx += len / 4;
}
- if (destroyed) {
- /* IB contains a destroy msg, free the handle */
+ if (allocated && !created) {
+ DRM_ERROR("New session without create command!\n");
+ r = -ENOENT;
+ }
+
+out:
+ if ((!r && destroyed) || (r && allocated)) {
+ /*
+ * IB contains a destroy msg or we have allocated an
+ * handle and got an error, anyway free the handle
+ */
for (i = 0; i < RADEON_MAX_VCE_HANDLES; ++i)
atomic_cmpxchg(&p->rdev->vce.handles[i], handle, 0);
}
- return 0;
+ return r;
}
/**
}
mutex_lock(&vm->mutex);
+ soffset /= RADEON_GPU_PAGE_SIZE;
+ eoffset /= RADEON_GPU_PAGE_SIZE;
+ if (soffset || eoffset) {
+ struct interval_tree_node *it;
+ it = interval_tree_iter_first(&vm->va, soffset, eoffset - 1);
+ if (it && it != &bo_va->it) {
+ struct radeon_bo_va *tmp;
+ tmp = container_of(it, struct radeon_bo_va, it);
+ /* bo and tmp overlap, invalid offset */
+ dev_err(rdev->dev, "bo %p va 0x%010Lx conflict with "
+ "(bo %p 0x%010lx 0x%010lx)\n", bo_va->bo,
+ soffset, tmp->bo, tmp->it.start, tmp->it.last);
+ mutex_unlock(&vm->mutex);
+ return -EINVAL;
+ }
+ }
+
if (bo_va->it.start || bo_va->it.last) {
if (bo_va->addr) {
/* add a clone of the bo_va to clear the old address */
spin_lock(&vm->status_lock);
list_add(&tmp->vm_status, &vm->freed);
spin_unlock(&vm->status_lock);
+
+ bo_va->addr = 0;
}
interval_tree_remove(&bo_va->it, &vm->va);
bo_va->it.last = 0;
}
- soffset /= RADEON_GPU_PAGE_SIZE;
- eoffset /= RADEON_GPU_PAGE_SIZE;
if (soffset || eoffset) {
- struct interval_tree_node *it;
- it = interval_tree_iter_first(&vm->va, soffset, eoffset - 1);
- if (it) {
- struct radeon_bo_va *tmp;
- tmp = container_of(it, struct radeon_bo_va, it);
- /* bo and tmp overlap, invalid offset */
- dev_err(rdev->dev, "bo %p va 0x%010Lx conflict with "
- "(bo %p 0x%010lx 0x%010lx)\n", bo_va->bo,
- soffset, tmp->bo, tmp->it.start, tmp->it.last);
- mutex_unlock(&vm->mutex);
- return -EINVAL;
- }
bo_va->it.start = soffset;
bo_va->it.last = eoffset - 1;
interval_tree_insert(&bo_va->it, &vm->va);
list_del(&bo_va->bo_list);
mutex_lock(&vm->mutex);
- interval_tree_remove(&bo_va->it, &vm->va);
+ if (bo_va->it.start || bo_va->it.last)
+ interval_tree_remove(&bo_va->it, &vm->va);
spin_lock(&vm->status_lock);
list_del(&bo_va->vm_status);
((n) & 0x3FFF) << 16)
/* UVD */
+#define UVD_SEMA_ADDR_LOW 0xef00
+#define UVD_SEMA_ADDR_HIGH 0xef04
+#define UVD_SEMA_CMD 0xef08
#define UVD_GPCOM_VCPU_CMD 0xef0c
#define UVD_GPCOM_VCPU_DATA0 0xef10
#define UVD_GPCOM_VCPU_DATA1 0xef14
static struct si_dpm_quirk si_dpm_quirk_list[] = {
/* PITCAIRN - https://bugs.freedesktop.org/show_bug.cgi?id=76490 */
{ PCI_VENDOR_ID_ATI, 0x6810, 0x1462, 0x3036, 0, 120000 },
+ { PCI_VENDOR_ID_ATI, 0x6811, 0x174b, 0xe271, 0, 120000 },
{ 0, 0, 0, 0 },
};
struct radeon_semaphore *semaphore,
bool emit_wait)
{
- uint64_t addr = semaphore->gpu_addr;
-
- radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_LOW, 0));
- radeon_ring_write(ring, (addr >> 3) & 0x000FFFFF);
-
- radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_HIGH, 0));
- radeon_ring_write(ring, (addr >> 23) & 0x000FFFFF);
-
- radeon_ring_write(ring, PACKET0(UVD_SEMA_CMD, 0));
- radeon_ring_write(ring, emit_wait ? 1 : 0);
-
- return true;
+ /* disable semaphores for UVD V1 hardware */
+ return false;
}
/**
radeon_ring_write(ring, 2);
}
+/**
+ * uvd_v2_2_semaphore_emit - emit semaphore command
+ *
+ * @rdev: radeon_device pointer
+ * @ring: radeon_ring pointer
+ * @semaphore: semaphore to emit commands for
+ * @emit_wait: true if we should emit a wait command
+ *
+ * Emit a semaphore command (either wait or signal) to the UVD ring.
+ */
+bool uvd_v2_2_semaphore_emit(struct radeon_device *rdev,
+ struct radeon_ring *ring,
+ struct radeon_semaphore *semaphore,
+ bool emit_wait)
+{
+ uint64_t addr = semaphore->gpu_addr;
+
+ radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_LOW, 0));
+ radeon_ring_write(ring, (addr >> 3) & 0x000FFFFF);
+
+ radeon_ring_write(ring, PACKET0(UVD_SEMA_ADDR_HIGH, 0));
+ radeon_ring_write(ring, (addr >> 23) & 0x000FFFFF);
+
+ radeon_ring_write(ring, PACKET0(UVD_SEMA_CMD, 0));
+ radeon_ring_write(ring, emit_wait ? 1 : 0);
+
+ return true;
+}
+
/**
* uvd_v2_2_resume - memory controller programming
*
struct vop *vop;
struct resource *res;
size_t alloc_size;
- int ret;
+ int ret, irq;
of_id = of_match_device(vop_driver_dt_match, dev);
vop_data = of_id->data;
return ret;
}
- vop->irq = platform_get_irq(pdev, 0);
- if (vop->irq < 0) {
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
dev_err(dev, "cannot find irq for vop\n");
- return vop->irq;
+ return irq;
}
+ vop->irq = (unsigned int)irq;
spin_lock_init(&vop->reg_lock);
spin_lock_init(&vop->irq_lock);
drm->irq_enabled = true;
/* syncpoints are used for full 32-bit hardware VBLANK counters */
- drm->vblank_disable_immediate = true;
drm->max_vblank_count = 0xffffffff;
err = drm_vblank_init(drm, drm->mode_config.num_crtc);
} sgid_addr, dgid_addr;
- ret = rdma_gid2ip(&sgid_addr._sockaddr, sgid);
- if (ret)
- return ret;
-
- ret = rdma_gid2ip(&dgid_addr._sockaddr, dgid);
- if (ret)
- return ret;
+ rdma_gid2ip(&sgid_addr._sockaddr, sgid);
+ rdma_gid2ip(&dgid_addr._sockaddr, dgid);
memset(&dev_addr, 0, sizeof(dev_addr));
struct sockaddr_in6 _sockaddr_in6;
} gid_addr;
- ret = rdma_gid2ip(&gid_addr._sockaddr, sgid);
+ rdma_gid2ip(&gid_addr._sockaddr, sgid);
- if (ret)
- return ret;
memset(&dev_addr, 0, sizeof(dev_addr));
ret = rdma_translate_ip(&gid_addr._sockaddr, &dev_addr, vlan_id);
if (ret)
return cm_id_priv;
}
-static void cm_mask_copy(u8 *dst, u8 *src, u8 *mask)
+static void cm_mask_copy(u32 *dst, const u32 *src, const u32 *mask)
{
int i;
- for (i = 0; i < IB_CM_COMPARE_SIZE / sizeof(unsigned long); i++)
- ((unsigned long *) dst)[i] = ((unsigned long *) src)[i] &
- ((unsigned long *) mask)[i];
+ for (i = 0; i < IB_CM_COMPARE_SIZE; i++)
+ dst[i] = src[i] & mask[i];
}
static int cm_compare_data(struct ib_cm_compare_data *src_data,
struct ib_cm_compare_data *dst_data)
{
- u8 src[IB_CM_COMPARE_SIZE];
- u8 dst[IB_CM_COMPARE_SIZE];
+ u32 src[IB_CM_COMPARE_SIZE];
+ u32 dst[IB_CM_COMPARE_SIZE];
if (!src_data || !dst_data)
return 0;
cm_mask_copy(src, src_data->data, dst_data->mask);
cm_mask_copy(dst, dst_data->data, src_data->mask);
- return memcmp(src, dst, IB_CM_COMPARE_SIZE);
+ return memcmp(src, dst, sizeof(src));
}
-static int cm_compare_private_data(u8 *private_data,
+static int cm_compare_private_data(u32 *private_data,
struct ib_cm_compare_data *dst_data)
{
- u8 src[IB_CM_COMPARE_SIZE];
+ u32 src[IB_CM_COMPARE_SIZE];
if (!dst_data)
return 0;
cm_mask_copy(src, private_data, dst_data->mask);
- return memcmp(src, dst_data->data, IB_CM_COMPARE_SIZE);
+ return memcmp(src, dst_data->data, sizeof(src));
}
/*
static struct cm_id_private * cm_find_listen(struct ib_device *device,
__be64 service_id,
- u8 *private_data)
+ u32 *private_data)
{
struct rb_node *node = cm.listen_service_table.rb_node;
struct cm_id_private *cm_id_priv;
cm_mask_copy(cm_id_priv->compare_data->data,
compare_data->data, compare_data->mask);
memcpy(cm_id_priv->compare_data->mask, compare_data->mask,
- IB_CM_COMPARE_SIZE);
+ sizeof(compare_data->mask));
}
cm_id->state = IB_CM_LISTEN;
/* local ACK timeout:5, rsvd:3 */
u8 alt_offset139;
- u8 private_data[IB_CM_REQ_PRIVATE_DATA_SIZE];
+ u32 private_data[IB_CM_REQ_PRIVATE_DATA_SIZE / sizeof(u32)];
} __attribute__ ((packed));
__be16 rsvd;
__be64 service_id;
- u8 private_data[IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE];
+ u32 private_data[IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE / sizeof(u32)];
} __attribute__ ((packed));
struct cm_sidr_rep_msg {
memcpy(&ib->sib_addr, &path->dgid, 16);
}
+static __be16 ss_get_port(const struct sockaddr_storage *ss)
+{
+ if (ss->ss_family == AF_INET)
+ return ((struct sockaddr_in *)ss)->sin_port;
+ else if (ss->ss_family == AF_INET6)
+ return ((struct sockaddr_in6 *)ss)->sin6_port;
+ BUG();
+}
+
static void cma_save_ip4_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id,
struct cma_hdr *hdr)
{
- struct sockaddr_in *listen4, *ip4;
+ struct sockaddr_in *ip4;
- listen4 = (struct sockaddr_in *) &listen_id->route.addr.src_addr;
ip4 = (struct sockaddr_in *) &id->route.addr.src_addr;
- ip4->sin_family = listen4->sin_family;
+ ip4->sin_family = AF_INET;
ip4->sin_addr.s_addr = hdr->dst_addr.ip4.addr;
- ip4->sin_port = listen4->sin_port;
+ ip4->sin_port = ss_get_port(&listen_id->route.addr.src_addr);
ip4 = (struct sockaddr_in *) &id->route.addr.dst_addr;
- ip4->sin_family = listen4->sin_family;
+ ip4->sin_family = AF_INET;
ip4->sin_addr.s_addr = hdr->src_addr.ip4.addr;
ip4->sin_port = hdr->port;
}
static void cma_save_ip6_info(struct rdma_cm_id *id, struct rdma_cm_id *listen_id,
struct cma_hdr *hdr)
{
- struct sockaddr_in6 *listen6, *ip6;
+ struct sockaddr_in6 *ip6;
- listen6 = (struct sockaddr_in6 *) &listen_id->route.addr.src_addr;
ip6 = (struct sockaddr_in6 *) &id->route.addr.src_addr;
- ip6->sin6_family = listen6->sin6_family;
+ ip6->sin6_family = AF_INET6;
ip6->sin6_addr = hdr->dst_addr.ip6;
- ip6->sin6_port = listen6->sin6_port;
+ ip6->sin6_port = ss_get_port(&listen_id->route.addr.src_addr);
ip6 = (struct sockaddr_in6 *) &id->route.addr.dst_addr;
- ip6->sin6_family = listen6->sin6_family;
+ ip6->sin6_family = AF_INET6;
ip6->sin6_addr = hdr->src_addr.ip6;
ip6->sin6_port = hdr->port;
}
}
EXPORT_SYMBOL(iwpm_add_mapping_cb);
-/* netlink attribute policy for the response to add and query mapping request */
+/* netlink attribute policy for the response to add and query mapping request
+ * and response with remote address info */
static const struct nla_policy resp_query_policy[IWPM_NLA_RQUERY_MAPPING_MAX] = {
[IWPM_NLA_QUERY_MAPPING_SEQ] = { .type = NLA_U32 },
[IWPM_NLA_QUERY_LOCAL_ADDR] = { .len = sizeof(struct sockaddr_storage) },
}
EXPORT_SYMBOL(iwpm_add_and_query_mapping_cb);
+/*
+ * iwpm_remote_info_cb - Process a port mapper message, containing
+ * the remote connecting peer address info
+ */
+int iwpm_remote_info_cb(struct sk_buff *skb, struct netlink_callback *cb)
+{
+ struct nlattr *nltb[IWPM_NLA_RQUERY_MAPPING_MAX];
+ struct sockaddr_storage *local_sockaddr, *remote_sockaddr;
+ struct sockaddr_storage *mapped_loc_sockaddr, *mapped_rem_sockaddr;
+ struct iwpm_remote_info *rem_info;
+ const char *msg_type;
+ u8 nl_client;
+ int ret = -EINVAL;
+
+ msg_type = "Remote Mapping info";
+ if (iwpm_parse_nlmsg(cb, IWPM_NLA_RQUERY_MAPPING_MAX,
+ resp_query_policy, nltb, msg_type))
+ return ret;
+
+ nl_client = RDMA_NL_GET_CLIENT(cb->nlh->nlmsg_type);
+ if (!iwpm_valid_client(nl_client)) {
+ pr_info("%s: Invalid port mapper client = %d\n",
+ __func__, nl_client);
+ return ret;
+ }
+ atomic_set(&echo_nlmsg_seq, cb->nlh->nlmsg_seq);
+
+ local_sockaddr = (struct sockaddr_storage *)
+ nla_data(nltb[IWPM_NLA_QUERY_LOCAL_ADDR]);
+ remote_sockaddr = (struct sockaddr_storage *)
+ nla_data(nltb[IWPM_NLA_QUERY_REMOTE_ADDR]);
+ mapped_loc_sockaddr = (struct sockaddr_storage *)
+ nla_data(nltb[IWPM_NLA_RQUERY_MAPPED_LOC_ADDR]);
+ mapped_rem_sockaddr = (struct sockaddr_storage *)
+ nla_data(nltb[IWPM_NLA_RQUERY_MAPPED_REM_ADDR]);
+
+ if (mapped_loc_sockaddr->ss_family != local_sockaddr->ss_family ||
+ mapped_rem_sockaddr->ss_family != remote_sockaddr->ss_family) {
+ pr_info("%s: Sockaddr family doesn't match the requested one\n",
+ __func__);
+ return ret;
+ }
+ rem_info = kzalloc(sizeof(struct iwpm_remote_info), GFP_ATOMIC);
+ if (!rem_info) {
+ pr_err("%s: Unable to allocate a remote info\n", __func__);
+ ret = -ENOMEM;
+ return ret;
+ }
+ memcpy(&rem_info->mapped_loc_sockaddr, mapped_loc_sockaddr,
+ sizeof(struct sockaddr_storage));
+ memcpy(&rem_info->remote_sockaddr, remote_sockaddr,
+ sizeof(struct sockaddr_storage));
+ memcpy(&rem_info->mapped_rem_sockaddr, mapped_rem_sockaddr,
+ sizeof(struct sockaddr_storage));
+ rem_info->nl_client = nl_client;
+
+ iwpm_add_remote_info(rem_info);
+
+ iwpm_print_sockaddr(local_sockaddr,
+ "remote_info: Local sockaddr:");
+ iwpm_print_sockaddr(mapped_loc_sockaddr,
+ "remote_info: Mapped local sockaddr:");
+ iwpm_print_sockaddr(remote_sockaddr,
+ "remote_info: Remote sockaddr:");
+ iwpm_print_sockaddr(mapped_rem_sockaddr,
+ "remote_info: Mapped remote sockaddr:");
+ return ret;
+}
+EXPORT_SYMBOL(iwpm_remote_info_cb);
+
/* netlink attribute policy for the received request for mapping info */
static const struct nla_policy resp_mapinfo_policy[IWPM_NLA_MAPINFO_REQ_MAX] = {
[IWPM_NLA_MAPINFO_ULIB_NAME] = { .type = NLA_STRING,
#include "iwpm_util.h"
-#define IWPM_HASH_BUCKET_SIZE 512
-#define IWPM_HASH_BUCKET_MASK (IWPM_HASH_BUCKET_SIZE - 1)
+#define IWPM_MAPINFO_HASH_SIZE 512
+#define IWPM_MAPINFO_HASH_MASK (IWPM_MAPINFO_HASH_SIZE - 1)
+#define IWPM_REMINFO_HASH_SIZE 64
+#define IWPM_REMINFO_HASH_MASK (IWPM_REMINFO_HASH_SIZE - 1)
static LIST_HEAD(iwpm_nlmsg_req_list);
static DEFINE_SPINLOCK(iwpm_nlmsg_req_lock);
static struct hlist_head *iwpm_hash_bucket;
static DEFINE_SPINLOCK(iwpm_mapinfo_lock);
+static struct hlist_head *iwpm_reminfo_bucket;
+static DEFINE_SPINLOCK(iwpm_reminfo_lock);
+
static DEFINE_MUTEX(iwpm_admin_lock);
static struct iwpm_admin_data iwpm_admin;
int iwpm_init(u8 nl_client)
{
+ int ret = 0;
if (iwpm_valid_client(nl_client))
return -EINVAL;
mutex_lock(&iwpm_admin_lock);
if (atomic_read(&iwpm_admin.refcount) == 0) {
- iwpm_hash_bucket = kzalloc(IWPM_HASH_BUCKET_SIZE *
+ iwpm_hash_bucket = kzalloc(IWPM_MAPINFO_HASH_SIZE *
sizeof(struct hlist_head), GFP_KERNEL);
if (!iwpm_hash_bucket) {
- mutex_unlock(&iwpm_admin_lock);
+ ret = -ENOMEM;
pr_err("%s Unable to create mapinfo hash table\n", __func__);
- return -ENOMEM;
+ goto init_exit;
+ }
+ iwpm_reminfo_bucket = kzalloc(IWPM_REMINFO_HASH_SIZE *
+ sizeof(struct hlist_head), GFP_KERNEL);
+ if (!iwpm_reminfo_bucket) {
+ kfree(iwpm_hash_bucket);
+ ret = -ENOMEM;
+ pr_err("%s Unable to create reminfo hash table\n", __func__);
+ goto init_exit;
}
}
atomic_inc(&iwpm_admin.refcount);
+init_exit:
mutex_unlock(&iwpm_admin_lock);
- iwpm_set_valid(nl_client, 1);
- return 0;
+ if (!ret) {
+ iwpm_set_valid(nl_client, 1);
+ pr_debug("%s: Mapinfo and reminfo tables are created\n",
+ __func__);
+ }
+ return ret;
}
EXPORT_SYMBOL(iwpm_init);
static void free_hash_bucket(void);
+static void free_reminfo_bucket(void);
int iwpm_exit(u8 nl_client)
{
}
if (atomic_dec_and_test(&iwpm_admin.refcount)) {
free_hash_bucket();
- pr_debug("%s: Mapinfo hash table is destroyed\n", __func__);
+ free_reminfo_bucket();
+ pr_debug("%s: Resources are destroyed\n", __func__);
}
mutex_unlock(&iwpm_admin_lock);
iwpm_set_valid(nl_client, 0);
}
EXPORT_SYMBOL(iwpm_exit);
-static struct hlist_head *get_hash_bucket_head(struct sockaddr_storage *,
+static struct hlist_head *get_mapinfo_hash_bucket(struct sockaddr_storage *,
struct sockaddr_storage *);
int iwpm_create_mapinfo(struct sockaddr_storage *local_sockaddr,
struct hlist_head *hash_bucket_head;
struct iwpm_mapping_info *map_info;
unsigned long flags;
+ int ret = -EINVAL;
if (!iwpm_valid_client(nl_client))
- return -EINVAL;
+ return ret;
map_info = kzalloc(sizeof(struct iwpm_mapping_info), GFP_KERNEL);
if (!map_info) {
pr_err("%s: Unable to allocate a mapping info\n", __func__);
spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
if (iwpm_hash_bucket) {
- hash_bucket_head = get_hash_bucket_head(
+ hash_bucket_head = get_mapinfo_hash_bucket(
&map_info->local_sockaddr,
&map_info->mapped_sockaddr);
- hlist_add_head(&map_info->hlist_node, hash_bucket_head);
+ if (hash_bucket_head) {
+ hlist_add_head(&map_info->hlist_node, hash_bucket_head);
+ ret = 0;
+ }
}
spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags);
- return 0;
+ return ret;
}
EXPORT_SYMBOL(iwpm_create_mapinfo);
spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
if (iwpm_hash_bucket) {
- hash_bucket_head = get_hash_bucket_head(
+ hash_bucket_head = get_mapinfo_hash_bucket(
local_sockaddr,
mapped_local_addr);
+ if (!hash_bucket_head)
+ goto remove_mapinfo_exit;
+
hlist_for_each_entry_safe(map_info, tmp_hlist_node,
hash_bucket_head, hlist_node) {
}
}
}
+remove_mapinfo_exit:
spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags);
return ret;
}
/* remove all the mapinfo data from the list */
spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
- for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) {
+ for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) {
hlist_for_each_entry_safe(map_info, tmp_hlist_node,
&iwpm_hash_bucket[i], hlist_node) {
spin_unlock_irqrestore(&iwpm_mapinfo_lock, flags);
}
+static void free_reminfo_bucket(void)
+{
+ struct hlist_node *tmp_hlist_node;
+ struct iwpm_remote_info *rem_info;
+ unsigned long flags;
+ int i;
+
+ /* remove all the remote info from the list */
+ spin_lock_irqsave(&iwpm_reminfo_lock, flags);
+ for (i = 0; i < IWPM_REMINFO_HASH_SIZE; i++) {
+ hlist_for_each_entry_safe(rem_info, tmp_hlist_node,
+ &iwpm_reminfo_bucket[i], hlist_node) {
+
+ hlist_del_init(&rem_info->hlist_node);
+ kfree(rem_info);
+ }
+ }
+ /* free the hash list */
+ kfree(iwpm_reminfo_bucket);
+ iwpm_reminfo_bucket = NULL;
+ spin_unlock_irqrestore(&iwpm_reminfo_lock, flags);
+}
+
+static struct hlist_head *get_reminfo_hash_bucket(struct sockaddr_storage *,
+ struct sockaddr_storage *);
+
+void iwpm_add_remote_info(struct iwpm_remote_info *rem_info)
+{
+ struct hlist_head *hash_bucket_head;
+ unsigned long flags;
+
+ spin_lock_irqsave(&iwpm_reminfo_lock, flags);
+ if (iwpm_reminfo_bucket) {
+ hash_bucket_head = get_reminfo_hash_bucket(
+ &rem_info->mapped_loc_sockaddr,
+ &rem_info->mapped_rem_sockaddr);
+ if (hash_bucket_head)
+ hlist_add_head(&rem_info->hlist_node, hash_bucket_head);
+ }
+ spin_unlock_irqrestore(&iwpm_reminfo_lock, flags);
+}
+
+int iwpm_get_remote_info(struct sockaddr_storage *mapped_loc_addr,
+ struct sockaddr_storage *mapped_rem_addr,
+ struct sockaddr_storage *remote_addr,
+ u8 nl_client)
+{
+ struct hlist_node *tmp_hlist_node;
+ struct hlist_head *hash_bucket_head;
+ struct iwpm_remote_info *rem_info = NULL;
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (!iwpm_valid_client(nl_client)) {
+ pr_info("%s: Invalid client = %d\n", __func__, nl_client);
+ return ret;
+ }
+ spin_lock_irqsave(&iwpm_reminfo_lock, flags);
+ if (iwpm_reminfo_bucket) {
+ hash_bucket_head = get_reminfo_hash_bucket(
+ mapped_loc_addr,
+ mapped_rem_addr);
+ if (!hash_bucket_head)
+ goto get_remote_info_exit;
+ hlist_for_each_entry_safe(rem_info, tmp_hlist_node,
+ hash_bucket_head, hlist_node) {
+
+ if (!iwpm_compare_sockaddr(&rem_info->mapped_loc_sockaddr,
+ mapped_loc_addr) &&
+ !iwpm_compare_sockaddr(&rem_info->mapped_rem_sockaddr,
+ mapped_rem_addr)) {
+
+ memcpy(remote_addr, &rem_info->remote_sockaddr,
+ sizeof(struct sockaddr_storage));
+ iwpm_print_sockaddr(remote_addr,
+ "get_remote_info: Remote sockaddr:");
+
+ hlist_del_init(&rem_info->hlist_node);
+ kfree(rem_info);
+ ret = 0;
+ break;
+ }
+ }
+ }
+get_remote_info_exit:
+ spin_unlock_irqrestore(&iwpm_reminfo_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL(iwpm_get_remote_info);
+
struct iwpm_nlmsg_request *iwpm_get_nlmsg_request(__u32 nlmsg_seq,
u8 nl_client, gfp_t gfp)
{
return hash;
}
-static struct hlist_head *get_hash_bucket_head(struct sockaddr_storage
- *local_sockaddr,
- struct sockaddr_storage
- *mapped_sockaddr)
+static int get_hash_bucket(struct sockaddr_storage *a_sockaddr,
+ struct sockaddr_storage *b_sockaddr, u32 *hash)
{
- u32 local_hash, mapped_hash, hash;
+ u32 a_hash, b_hash;
- if (local_sockaddr->ss_family == AF_INET) {
- local_hash = iwpm_ipv4_jhash((struct sockaddr_in *) local_sockaddr);
- mapped_hash = iwpm_ipv4_jhash((struct sockaddr_in *) mapped_sockaddr);
+ if (a_sockaddr->ss_family == AF_INET) {
+ a_hash = iwpm_ipv4_jhash((struct sockaddr_in *) a_sockaddr);
+ b_hash = iwpm_ipv4_jhash((struct sockaddr_in *) b_sockaddr);
- } else if (local_sockaddr->ss_family == AF_INET6) {
- local_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) local_sockaddr);
- mapped_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) mapped_sockaddr);
+ } else if (a_sockaddr->ss_family == AF_INET6) {
+ a_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) a_sockaddr);
+ b_hash = iwpm_ipv6_jhash((struct sockaddr_in6 *) b_sockaddr);
} else {
pr_err("%s: Invalid sockaddr family\n", __func__);
- return NULL;
+ return -EINVAL;
}
- if (local_hash == mapped_hash) /* if port mapper isn't available */
- hash = local_hash;
+ if (a_hash == b_hash) /* if port mapper isn't available */
+ *hash = a_hash;
else
- hash = jhash_2words(local_hash, mapped_hash, 0);
+ *hash = jhash_2words(a_hash, b_hash, 0);
+ return 0;
+}
+
+static struct hlist_head *get_mapinfo_hash_bucket(struct sockaddr_storage
+ *local_sockaddr, struct sockaddr_storage
+ *mapped_sockaddr)
+{
+ u32 hash;
+ int ret;
- return &iwpm_hash_bucket[hash & IWPM_HASH_BUCKET_MASK];
+ ret = get_hash_bucket(local_sockaddr, mapped_sockaddr, &hash);
+ if (ret)
+ return NULL;
+ return &iwpm_hash_bucket[hash & IWPM_MAPINFO_HASH_MASK];
+}
+
+static struct hlist_head *get_reminfo_hash_bucket(struct sockaddr_storage
+ *mapped_loc_sockaddr, struct sockaddr_storage
+ *mapped_rem_sockaddr)
+{
+ u32 hash;
+ int ret;
+
+ ret = get_hash_bucket(mapped_loc_sockaddr, mapped_rem_sockaddr, &hash);
+ if (ret)
+ return NULL;
+ return &iwpm_reminfo_bucket[hash & IWPM_REMINFO_HASH_MASK];
}
static int send_mapinfo_num(u32 mapping_num, u8 nl_client, int iwpm_pid)
}
skb_num++;
spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
- for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) {
+ for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) {
hlist_for_each_entry(map_info, &iwpm_hash_bucket[i],
hlist_node) {
if (map_info->nl_client != nl_client)
spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
if (iwpm_hash_bucket) {
- for (i = 0; i < IWPM_HASH_BUCKET_SIZE; i++) {
+ for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) {
if (!hlist_empty(&iwpm_hash_bucket[i])) {
full_bucket = 1;
break;
u8 nl_client;
};
+struct iwpm_remote_info {
+ struct hlist_node hlist_node;
+ struct sockaddr_storage remote_sockaddr;
+ struct sockaddr_storage mapped_loc_sockaddr;
+ struct sockaddr_storage mapped_rem_sockaddr;
+ u8 nl_client;
+};
+
struct iwpm_admin_data {
atomic_t refcount;
atomic_t nlmsg_seq;
*/
int iwpm_get_nlmsg_seq(void);
+/**
+ * iwpm_add_reminfo - Add remote address info of the connecting peer
+ * to the remote info hash table
+ * @reminfo: The remote info to be added
+ */
+void iwpm_add_remote_info(struct iwpm_remote_info *reminfo);
+
/**
* iwpm_valid_client - Check if the port mapper client is valid
* @nl_client: The index of the netlink client
int remove_existing_mapping = 0;
int ret = 0;
- mutex_lock(&umem->odp_data->umem_mutex);
/*
* Note: we avoid writing if seq is different from the initial seq, to
* handle case of a racing notifier. This check also allows us to bail
}
out:
- mutex_unlock(&umem->odp_data->umem_mutex);
-
/* On Demand Paging - avoid pinning the page */
if (umem->context->invalidate_range || !stored_page)
put_page(page);
bcnt -= min_t(size_t, npages << PAGE_SHIFT, bcnt);
user_virt += npages << PAGE_SHIFT;
+ mutex_lock(&umem->odp_data->umem_mutex);
for (j = 0; j < npages; ++j) {
ret = ib_umem_odp_map_dma_single_page(
umem, k, base_virt_addr, local_page_list[j],
break;
k++;
}
+ mutex_unlock(&umem->odp_data->umem_mutex);
if (ret < 0) {
/* Release left over pages when handling errors. */
* faults from completion. We might be racing with other
* invalidations, so we must make sure we free each page only
* once. */
+ mutex_lock(&umem->odp_data->umem_mutex);
for (addr = virt; addr < bound; addr += (u64)umem->page_size) {
idx = (addr - ib_umem_start(umem)) / PAGE_SIZE;
- mutex_lock(&umem->odp_data->umem_mutex);
if (umem->odp_data->page_list[idx]) {
struct page *page = umem->odp_data->page_list[idx];
- struct page *head_page = compound_head(page);
dma_addr_t dma = umem->odp_data->dma_list[idx];
dma_addr_t dma_addr = dma & ODP_DMA_ADDR_MASK;
ib_dma_unmap_page(dev, dma_addr, PAGE_SIZE,
DMA_BIDIRECTIONAL);
- if (dma & ODP_WRITE_ALLOWED_BIT)
+ if (dma & ODP_WRITE_ALLOWED_BIT) {
+ struct page *head_page = compound_head(page);
/*
* set_page_dirty prefers being called with
* the page lock. However, MMU notifiers are
* be removed.
*/
set_page_dirty(head_page);
+ }
/* on demand pinning support */
if (!umem->context->invalidate_range)
put_page(page);
umem->odp_data->page_list[idx] = NULL;
umem->odp_data->dma_list[idx] = 0;
}
- mutex_unlock(&umem->odp_data->umem_mutex);
}
+ mutex_unlock(&umem->odp_data->umem_mutex);
}
EXPORT_SYMBOL(ib_umem_odp_unmap_dma_pages);
sizeof(ep->com.mapped_remote_addr));
}
+static int get_remote_addr(struct c4iw_ep *ep)
+{
+ int ret;
+
+ print_addr(&ep->com, __func__, "get_remote_addr");
+
+ ret = iwpm_get_remote_info(&ep->com.mapped_local_addr,
+ &ep->com.mapped_remote_addr,
+ &ep->com.remote_addr, RDMA_NL_C4IW);
+ if (ret)
+ pr_info(MOD "Unable to find remote peer addr info - err %d\n",
+ ret);
+
+ return ret;
+}
+
static void best_mtu(const unsigned short *mtus, unsigned short mtu,
unsigned int *idx, int use_ts, int ipv6)
{
if (is_t5(ep->com.dev->rdev.lldi.adapter_type)) {
opt2 |= T5_OPT_2_VALID_F;
opt2 |= CONG_CNTRL_V(CONG_ALG_TAHOE);
- opt2 |= CONG_CNTRL_VALID; /* OPT_2_ISS for T5 */
+ opt2 |= T5_ISS_F;
}
t4_set_arp_err_handler(skb, ep, act_open_req_arp_failure);
status, status2errno(status));
if (is_neg_adv(status)) {
- dev_warn(&dev->rdev.lldi.pdev->dev,
- "Connection problems for atid %u status %u (%s)\n",
- atid, status, neg_adv_str(status));
+ PDBG("%s Connection problems for atid %u status %u (%s)\n",
+ __func__, atid, status, neg_adv_str(status));
+ ep->stats.connect_neg_adv++;
+ mutex_lock(&dev->rdev.stats.lock);
+ dev->rdev.stats.neg_adv++;
+ mutex_unlock(&dev->rdev.stats.lock);
return 0;
}
u32 isn = (prandom_u32() & ~7UL) - 1;
opt2 |= T5_OPT_2_VALID_F;
opt2 |= CONG_CNTRL_V(CONG_ALG_TAHOE);
- opt2 |= CONG_CNTRL_VALID; /* OPT_2_ISS for T5 */
+ opt2 |= T5_ISS_F;
rpl5 = (void *)rpl;
memset(&rpl5->iss, 0, roundup(sizeof(*rpl5)-sizeof(*rpl), 16));
if (peer2peer)
state_set(&child_ep->com, CONNECTING);
child_ep->com.dev = dev;
child_ep->com.cm_id = NULL;
+
+ /*
+ * The mapped_local and mapped_remote addresses get setup with
+ * the actual 4-tuple. The local address will be based on the
+ * actual local address of the connection, but on the port number
+ * of the parent listening endpoint. The remote address is
+ * setup based on a query to the IWPM since we don't know what it
+ * originally was before mapping. If no mapping was done, then
+ * mapped_remote == remote, and mapped_local == local.
+ */
if (iptype == 4) {
struct sockaddr_in *sin = (struct sockaddr_in *)
- &child_ep->com.local_addr;
+ &child_ep->com.mapped_local_addr;
+
sin->sin_family = PF_INET;
sin->sin_port = local_port;
sin->sin_addr.s_addr = *(__be32 *)local_ip;
- sin = (struct sockaddr_in *)&child_ep->com.remote_addr;
+
+ sin = (struct sockaddr_in *)&child_ep->com.local_addr;
+ sin->sin_family = PF_INET;
+ sin->sin_port = ((struct sockaddr_in *)
+ &parent_ep->com.local_addr)->sin_port;
+ sin->sin_addr.s_addr = *(__be32 *)local_ip;
+
+ sin = (struct sockaddr_in *)&child_ep->com.mapped_remote_addr;
sin->sin_family = PF_INET;
sin->sin_port = peer_port;
sin->sin_addr.s_addr = *(__be32 *)peer_ip;
} else {
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)
- &child_ep->com.local_addr;
+ &child_ep->com.mapped_local_addr;
+
sin6->sin6_family = PF_INET6;
sin6->sin6_port = local_port;
memcpy(sin6->sin6_addr.s6_addr, local_ip, 16);
- sin6 = (struct sockaddr_in6 *)&child_ep->com.remote_addr;
+
+ sin6 = (struct sockaddr_in6 *)&child_ep->com.local_addr;
+ sin6->sin6_family = PF_INET6;
+ sin6->sin6_port = ((struct sockaddr_in6 *)
+ &parent_ep->com.local_addr)->sin6_port;
+ memcpy(sin6->sin6_addr.s6_addr, local_ip, 16);
+
+ sin6 = (struct sockaddr_in6 *)&child_ep->com.mapped_remote_addr;
sin6->sin6_family = PF_INET6;
sin6->sin6_port = peer_port;
memcpy(sin6->sin6_addr.s6_addr, peer_ip, 16);
}
+ memcpy(&child_ep->com.remote_addr, &child_ep->com.mapped_remote_addr,
+ sizeof(child_ep->com.remote_addr));
+ get_remote_addr(child_ep);
+
c4iw_get_ep(&parent_ep->com);
child_ep->parent_ep = parent_ep;
child_ep->tos = PASS_OPEN_TOS_G(ntohl(req->tos_stid));
ep = lookup_tid(t, tid);
if (is_neg_adv(req->status)) {
- dev_warn(&dev->rdev.lldi.pdev->dev,
- "Negative advice on abort - tid %u status %d (%s)\n",
- ep->hwtid, req->status, neg_adv_str(req->status));
+ PDBG("%s Negative advice on abort- tid %u status %d (%s)\n",
+ __func__, ep->hwtid, req->status,
+ neg_adv_str(req->status));
+ ep->stats.abort_neg_adv++;
+ mutex_lock(&dev->rdev.stats.lock);
+ dev->rdev.stats.neg_adv++;
+ mutex_unlock(&dev->rdev.stats.lock);
return 0;
}
PDBG("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid,
* TP will ignore any value > 0 for MSS index.
*/
req->tcb.opt0 = cpu_to_be64(MSS_IDX_V(0xF));
- req->cookie = (unsigned long)skb;
+ req->cookie = (uintptr_t)skb;
set_wr_txq(req_skb, CPL_PRIORITY_CONTROL, port_id);
ret = cxgb4_ofld_send(dev->rdev.lldi.ports[0], req_skb);
return 0;
}
if (is_neg_adv(req->status)) {
- dev_warn(&dev->rdev.lldi.pdev->dev,
- "Negative advice on abort - tid %u status %d (%s)\n",
- ep->hwtid, req->status, neg_adv_str(req->status));
+ PDBG("%s Negative advice on abort- tid %u status %d (%s)\n",
+ __func__, ep->hwtid, req->status,
+ neg_adv_str(req->status));
+ ep->stats.abort_neg_adv++;
+ dev->rdev.stats.neg_adv++;
kfree_skb(skb);
return 0;
}
FW_RI_RES_WR_NRES_V(1) |
FW_WR_COMPL_F);
res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16));
- res_wr->cookie = (unsigned long) &wr_wait;
+ res_wr->cookie = (uintptr_t)&wr_wait;
res = res_wr->res;
res->u.cq.restype = FW_RI_RES_TYPE_CQ;
res->u.cq.op = FW_RI_RES_OP_RESET;
FW_RI_RES_WR_NRES_V(1) |
FW_WR_COMPL_F);
res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16));
- res_wr->cookie = (unsigned long) &wr_wait;
+ res_wr->cookie = (uintptr_t)&wr_wait;
res = res_wr->res;
res->u.cq.restype = FW_RI_RES_TYPE_CQ;
res->u.cq.op = FW_RI_RES_OP_WRITE;
goto err4;
cq->gen = 1;
- cq->gts = rdev->lldi.gts_reg;
cq->rdev = rdev;
if (user) {
- cq->ugts = (u64)pci_resource_start(rdev->lldi.pdev, 2) +
- (cq->cqid << rdev->cqshift);
- cq->ugts &= PAGE_MASK;
+ u32 off = (cq->cqid << rdev->cqshift) & PAGE_MASK;
+
+ cq->ugts = (u64)rdev->bar2_pa + off;
+ } else if (is_t4(rdev->lldi.adapter_type)) {
+ cq->gts = rdev->lldi.gts_reg;
+ cq->qid_mask = -1U;
+ } else {
+ u32 off = ((cq->cqid << rdev->cqshift) & PAGE_MASK) + 12;
+
+ cq->gts = rdev->bar2_kva + off;
+ cq->qid_mask = rdev->qpmask;
}
return 0;
err4:
}
PDBG("%s cqid 0x%0x chp %p size %u memsize %zu, dma_addr 0x%0llx\n",
__func__, chp->cq.cqid, chp, chp->cq.size,
- chp->cq.memsize,
- (unsigned long long) chp->cq.dma_addr);
+ chp->cq.memsize, (unsigned long long) chp->cq.dma_addr);
return &chp->ibcq;
err5:
kfree(mm2);
[RDMA_NL_IWPM_ADD_MAPPING] = {.dump = iwpm_add_mapping_cb},
[RDMA_NL_IWPM_QUERY_MAPPING] = {.dump = iwpm_add_and_query_mapping_cb},
[RDMA_NL_IWPM_HANDLE_ERR] = {.dump = iwpm_mapping_error_cb},
+ [RDMA_NL_IWPM_REMOTE_INFO] = {.dump = iwpm_remote_info_cb},
[RDMA_NL_IWPM_MAPINFO] = {.dump = iwpm_mapping_info_cb},
[RDMA_NL_IWPM_MAPINFO_NUM] = {.dump = iwpm_ack_mapping_info_cb}
};
int prev_ts_set = 0;
int idx, end;
-#define ts2ns(ts) div64_ul((ts) * dev->rdev.lldi.cclk_ps, 1000)
+#define ts2ns(ts) div64_u64((ts) * dev->rdev.lldi.cclk_ps, 1000)
idx = atomic_read(&dev->rdev.wr_log_idx) &
(dev->rdev.wr_log_size - 1);
dev->rdev.stats.act_ofld_conn_fails);
seq_printf(seq, "PAS_OFLD_CONN_FAILS: %10llu\n",
dev->rdev.stats.pas_ofld_conn_fails);
+ seq_printf(seq, "NEG_ADV_RCVD: %10llu\n", dev->rdev.stats.neg_adv);
seq_printf(seq, "AVAILABLE IRD: %10u\n", dev->avail_ird);
return 0;
}
cc = snprintf(epd->buf + epd->pos, space,
"ep %p cm_id %p qp %p state %d flags 0x%lx "
"history 0x%lx hwtid %d atid %d "
+ "conn_na %u abort_na %u "
"%pI4:%d/%d <-> %pI4:%d/%d\n",
ep, ep->com.cm_id, ep->com.qp,
(int)ep->com.state, ep->com.flags,
ep->com.history, ep->hwtid, ep->atid,
+ ep->stats.connect_neg_adv,
+ ep->stats.abort_neg_adv,
&lsin->sin_addr, ntohs(lsin->sin_port),
ntohs(mapped_lsin->sin_port),
&rsin->sin_addr, ntohs(rsin->sin_port),
cc = snprintf(epd->buf + epd->pos, space,
"ep %p cm_id %p qp %p state %d flags 0x%lx "
"history 0x%lx hwtid %d atid %d "
+ "conn_na %u abort_na %u "
"%pI6:%d/%d <-> %pI6:%d/%d\n",
ep, ep->com.cm_id, ep->com.qp,
(int)ep->com.state, ep->com.flags,
ep->com.history, ep->hwtid, ep->atid,
+ ep->stats.connect_neg_adv,
+ ep->stats.abort_neg_adv,
&lsin6->sin6_addr, ntohs(lsin6->sin6_port),
ntohs(mapped_lsin6->sin6_port),
&rsin6->sin6_addr, ntohs(rsin6->sin6_port),
c4iw_init_dev_ucontext(rdev, &rdev->uctx);
+ /*
+ * This implementation assumes udb_density == ucq_density! Eventually
+ * we might need to support this but for now fail the open. Also the
+ * cqid and qpid range must match for now.
+ */
+ if (rdev->lldi.udb_density != rdev->lldi.ucq_density) {
+ pr_err(MOD "%s: unsupported udb/ucq densities %u/%u\n",
+ pci_name(rdev->lldi.pdev), rdev->lldi.udb_density,
+ rdev->lldi.ucq_density);
+ err = -EINVAL;
+ goto err1;
+ }
+ if (rdev->lldi.vr->qp.start != rdev->lldi.vr->cq.start ||
+ rdev->lldi.vr->qp.size != rdev->lldi.vr->cq.size) {
+ pr_err(MOD "%s: unsupported qp and cq id ranges "
+ "qp start %u size %u cq start %u size %u\n",
+ pci_name(rdev->lldi.pdev), rdev->lldi.vr->qp.start,
+ rdev->lldi.vr->qp.size, rdev->lldi.vr->cq.size,
+ rdev->lldi.vr->cq.size);
+ err = -EINVAL;
+ goto err1;
+ }
+
/*
* qpshift is the number of bits to shift the qpid left in order
* to get the correct address of the doorbell for that qp.
rdev->lldi.vr->qp.size,
rdev->lldi.vr->cq.start,
rdev->lldi.vr->cq.size);
- PDBG("udb len 0x%x udb base %llx db_reg %p gts_reg %p qpshift %lu "
+ PDBG("udb len 0x%x udb base %p db_reg %p gts_reg %p qpshift %lu "
"qpmask 0x%x cqshift %lu cqmask 0x%x\n",
(unsigned)pci_resource_len(rdev->lldi.pdev, 2),
- (u64)pci_resource_start(rdev->lldi.pdev, 2),
+ (void *)pci_resource_start(rdev->lldi.pdev, 2),
rdev->lldi.db_reg,
rdev->lldi.gts_reg,
rdev->qpshift, rdev->qpmask,
u64 tcam_full;
u64 act_ofld_conn_fails;
u64 pas_ofld_conn_fails;
+ u64 neg_adv;
};
struct c4iw_hw_queue {
int backlog;
};
+struct c4iw_ep_stats {
+ unsigned connect_neg_adv;
+ unsigned abort_neg_adv;
+};
+
struct c4iw_ep {
struct c4iw_ep_common com;
struct c4iw_ep *parent_ep;
unsigned int retry_count;
int snd_win;
int rcv_win;
+ struct c4iw_ep_stats stats;
};
static inline void print_addr(struct c4iw_ep_common *epc, const char *func,
if (i == (num_wqe-1)) {
req->wr.wr_hi = cpu_to_be32(FW_WR_OP_V(FW_ULPTX_WR) |
FW_WR_COMPL_F);
- req->wr.wr_lo = (__force __be64)(unsigned long) &wr_wait;
+ req->wr.wr_lo = (__force __be64)&wr_wait;
} else
req->wr.wr_hi = cpu_to_be32(FW_WR_OP_V(FW_ULPTX_WR));
req->wr.wr_mid = cpu_to_be32(
mhp->attr.zbva = 0;
mhp->attr.va_fbo = 0;
mhp->attr.page_size = 0;
- mhp->attr.len = ~0UL;
+ mhp->attr.len = ~0ULL;
mhp->attr.pbl_size = 0;
ret = write_tpt_entry(&rhp->rdev, 0, &stag, 1, php->pdid,
FW_RI_STAG_NSMR, mhp->attr.perms,
- mhp->attr.mw_bind_enable, 0, 0, ~0UL, 0, 0, 0);
+ mhp->attr.mw_bind_enable, 0, 0, ~0ULL, 0, 0, 0);
if (ret)
goto err1;
FW_RI_RES_WR_NRES_V(2) |
FW_WR_COMPL_F);
res_wr->len16_pkd = cpu_to_be32(DIV_ROUND_UP(wr_len, 16));
- res_wr->cookie = (unsigned long) &wr_wait;
+ res_wr->cookie = (uintptr_t)&wr_wait;
res = res_wr->res;
res->u.sqrq.restype = FW_RI_RES_TYPE_SQ;
res->u.sqrq.op = FW_RI_RES_OP_WRITE;
wqe->flowid_len16 = cpu_to_be32(
FW_WR_FLOWID_V(ep->hwtid) |
FW_WR_LEN16_V(DIV_ROUND_UP(sizeof(*wqe), 16)));
- wqe->cookie = (unsigned long) &ep->com.wr_wait;
+ wqe->cookie = (uintptr_t)&ep->com.wr_wait;
wqe->u.fini.type = FW_RI_TYPE_FINI;
ret = c4iw_ofld_send(&rhp->rdev, skb);
FW_WR_FLOWID_V(qhp->ep->hwtid) |
FW_WR_LEN16_V(DIV_ROUND_UP(sizeof(*wqe), 16)));
- wqe->cookie = (unsigned long) &qhp->ep->com.wr_wait;
+ wqe->cookie = (uintptr_t)&qhp->ep->com.wr_wait;
wqe->u.init.type = FW_RI_TYPE_INIT;
wqe->u.init.mpareqbit_p2ptype =
mm2->len = PAGE_ALIGN(qhp->wq.rq.memsize);
insert_mmap(ucontext, mm2);
mm3->key = uresp.sq_db_gts_key;
- mm3->addr = (__force unsigned long) qhp->wq.sq.udb;
+ mm3->addr = (__force unsigned long)qhp->wq.sq.udb;
mm3->len = PAGE_SIZE;
insert_mmap(ucontext, mm3);
mm4->key = uresp.rq_db_gts_key;
- mm4->addr = (__force unsigned long) qhp->wq.rq.udb;
+ mm4->addr = (__force unsigned long)qhp->wq.rq.udb;
mm4->len = PAGE_SIZE;
insert_mmap(ucontext, mm4);
if (mm5) {
size_t memsize;
__be64 bits_type_ts;
u32 cqid;
+ u32 qid_mask;
int vector;
u16 size; /* including status page */
u16 cidx;
set_bit(CQ_ARMED, &cq->flags);
while (cq->cidx_inc > CIDXINC_M) {
val = SEINTARM_V(0) | CIDXINC_V(CIDXINC_M) | TIMERREG_V(7) |
- INGRESSQID_V(cq->cqid);
+ INGRESSQID_V(cq->cqid & cq->qid_mask);
writel(val, cq->gts);
cq->cidx_inc -= CIDXINC_M;
}
val = SEINTARM_V(se) | CIDXINC_V(cq->cidx_inc) | TIMERREG_V(6) |
- INGRESSQID_V(cq->cqid);
+ INGRESSQID_V(cq->cqid & cq->qid_mask);
writel(val, cq->gts);
cq->cidx_inc = 0;
return 0;
u32 val;
val = SEINTARM_V(0) | CIDXINC_V(cq->cidx_inc) | TIMERREG_V(7) |
- INGRESSQID_V(cq->cqid);
+ INGRESSQID_V(cq->cqid & cq->qid_mask);
writel(val, cq->gts);
cq->cidx_inc = 0;
}
#define CONG_CNTRL_V(x) ((x) << CONG_CNTRL_S)
#define CONG_CNTRL_G(x) (((x) >> CONG_CNTRL_S) & CONG_CNTRL_M)
-#define CONG_CNTRL_VALID (1 << 18)
+#define T5_ISS_S 18
+#define T5_ISS_V(x) ((x) << T5_ISS_S)
+#define T5_ISS_F T5_ISS_V(1U)
#endif /* _T4FW_RI_API_H_ */
[RDMA_NL_IWPM_REG_PID] = {.dump = iwpm_register_pid_cb},
[RDMA_NL_IWPM_ADD_MAPPING] = {.dump = iwpm_add_mapping_cb},
[RDMA_NL_IWPM_QUERY_MAPPING] = {.dump = iwpm_add_and_query_mapping_cb},
+ [RDMA_NL_IWPM_REMOTE_INFO] = {.dump = iwpm_remote_info_cb},
[RDMA_NL_IWPM_HANDLE_ERR] = {.dump = iwpm_mapping_error_cb},
[RDMA_NL_IWPM_MAPINFO] = {.dump = iwpm_mapping_info_cb},
[RDMA_NL_IWPM_MAPINFO_NUM] = {.dump = iwpm_ack_mapping_info_cb}
memcpy(pm_msg->if_name, nesvnic->netdev->name, IWPM_IFNAME_SIZE);
}
+static void record_sockaddr_info(struct sockaddr_storage *addr_info,
+ nes_addr_t *ip_addr, u16 *port_num)
+{
+ struct sockaddr_in *in_addr = (struct sockaddr_in *)addr_info;
+
+ if (in_addr->sin_family == AF_INET) {
+ *ip_addr = ntohl(in_addr->sin_addr.s_addr);
+ *port_num = ntohs(in_addr->sin_port);
+ }
+}
+
/*
* nes_record_pm_msg - Save the received mapping info
*/
static void nes_record_pm_msg(struct nes_cm_info *cm_info,
struct iwpm_sa_data *pm_msg)
{
- struct sockaddr_in *mapped_loc_addr =
- (struct sockaddr_in *)&pm_msg->mapped_loc_addr;
- struct sockaddr_in *mapped_rem_addr =
- (struct sockaddr_in *)&pm_msg->mapped_rem_addr;
-
- if (mapped_loc_addr->sin_family == AF_INET) {
- cm_info->mapped_loc_addr =
- ntohl(mapped_loc_addr->sin_addr.s_addr);
- cm_info->mapped_loc_port = ntohs(mapped_loc_addr->sin_port);
- }
- if (mapped_rem_addr->sin_family == AF_INET) {
- cm_info->mapped_rem_addr =
- ntohl(mapped_rem_addr->sin_addr.s_addr);
- cm_info->mapped_rem_port = ntohs(mapped_rem_addr->sin_port);
- }
+ record_sockaddr_info(&pm_msg->mapped_loc_addr,
+ &cm_info->mapped_loc_addr, &cm_info->mapped_loc_port);
+
+ record_sockaddr_info(&pm_msg->mapped_rem_addr,
+ &cm_info->mapped_rem_addr, &cm_info->mapped_rem_port);
+}
+
+/*
+ * nes_get_reminfo - Get the address info of the remote connecting peer
+ */
+static int nes_get_remote_addr(struct nes_cm_node *cm_node)
+{
+ struct sockaddr_storage mapped_loc_addr, mapped_rem_addr;
+ struct sockaddr_storage remote_addr;
+ int ret;
+
+ nes_create_sockaddr(htonl(cm_node->mapped_loc_addr),
+ htons(cm_node->mapped_loc_port), &mapped_loc_addr);
+ nes_create_sockaddr(htonl(cm_node->mapped_rem_addr),
+ htons(cm_node->mapped_rem_port), &mapped_rem_addr);
+
+ ret = iwpm_get_remote_info(&mapped_loc_addr, &mapped_rem_addr,
+ &remote_addr, RDMA_NL_NES);
+ if (ret)
+ nes_debug(NES_DBG_CM, "Unable to find remote peer address info\n");
+ else
+ record_sockaddr_info(&remote_addr, &cm_node->rem_addr,
+ &cm_node->rem_port);
+ return ret;
}
/**
return NULL;
/* set our node specific transport info */
- cm_node->loc_addr = cm_info->loc_addr;
+ if (listener) {
+ cm_node->loc_addr = listener->loc_addr;
+ cm_node->loc_port = listener->loc_port;
+ } else {
+ cm_node->loc_addr = cm_info->loc_addr;
+ cm_node->loc_port = cm_info->loc_port;
+ }
cm_node->rem_addr = cm_info->rem_addr;
- cm_node->loc_port = cm_info->loc_port;
cm_node->rem_port = cm_info->rem_port;
cm_node->mapped_loc_addr = cm_info->mapped_loc_addr;
cm_node->state = NES_CM_STATE_ESTABLISHED;
if (datasize) {
cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
+ nes_get_remote_addr(cm_node);
handle_rcv_mpa(cm_node, skb);
} else { /* rcvd ACK only */
dev_kfree_skb_any(skb);
extern u32 qib_cpulist_count;
extern unsigned long *qib_cpulist;
-extern unsigned qib_wc_pat;
extern unsigned qib_cc_table_size;
int qib_init(struct qib_devdata *, int);
int init_chip_wc_pat(struct qib_devdata *dd, u32);
vma->vm_flags &= ~VM_MAYREAD;
vma->vm_flags |= VM_DONTCOPY | VM_DONTEXPAND;
- if (qib_wc_pat)
+ /* We used PAT if wc_cookie == 0 */
+ if (!dd->wc_cookie)
vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
ret = io_remap_pfn_range(vma, vma->vm_start, phys >> PAGE_SHIFT,
qib_6120_config_ctxts(dd);
qib_set_ctxtcnt(dd);
- if (qib_wc_pat) {
- ret = init_chip_wc_pat(dd, 0);
- if (ret)
- goto bail;
- }
+ ret = init_chip_wc_pat(dd, 0);
+ if (ret)
+ goto bail;
set_6120_baseaddrs(dd); /* set chip access pointers now */
ret = 0;
qib_7220_config_ctxts(dd);
qib_set_ctxtcnt(dd); /* needed for PAT setup */
- if (qib_wc_pat) {
- ret = init_chip_wc_pat(dd, 0);
- if (ret)
- goto bail;
- }
+ ret = init_chip_wc_pat(dd, 0);
+ if (ret)
+ goto bail;
set_7220_baseaddrs(dd); /* set chip access pointers now */
ret = 0;
unsigned features, pidx, sbufcnt;
int ret, mtu;
u32 sbufs, updthresh;
+ resource_size_t vl15off;
/* pport structs are contiguous, allocated after devdata */
ppd = (struct qib_pportdata *)(dd + 1);
qib_7322_config_ctxts(dd);
qib_set_ctxtcnt(dd);
- if (qib_wc_pat) {
- resource_size_t vl15off;
- /*
- * We do not set WC on the VL15 buffers to avoid
- * a rare problem with unaligned writes from
- * interrupt-flushed store buffers, so we need
- * to map those separately here. We can't solve
- * this for the rarely used mtrr case.
- */
- ret = init_chip_wc_pat(dd, 0);
- if (ret)
- goto bail;
+ /*
+ * We do not set WC on the VL15 buffers to avoid
+ * a rare problem with unaligned writes from
+ * interrupt-flushed store buffers, so we need
+ * to map those separately here. We can't solve
+ * this for the rarely used mtrr case.
+ */
+ ret = init_chip_wc_pat(dd, 0);
+ if (ret)
+ goto bail;
- /* vl15 buffers start just after the 4k buffers */
- vl15off = dd->physaddr + (dd->piobufbase >> 32) +
- dd->piobcnt4k * dd->align4k;
- dd->piovl15base = ioremap_nocache(vl15off,
- NUM_VL15_BUFS * dd->align4k);
- if (!dd->piovl15base) {
- ret = -ENOMEM;
- goto bail;
- }
+ /* vl15 buffers start just after the 4k buffers */
+ vl15off = dd->physaddr + (dd->piobufbase >> 32) +
+ dd->piobcnt4k * dd->align4k;
+ dd->piovl15base = ioremap_nocache(vl15off,
+ NUM_VL15_BUFS * dd->align4k);
+ if (!dd->piovl15base) {
+ ret = -ENOMEM;
+ goto bail;
}
+
qib_7322_set_baseaddrs(dd); /* set chip access pointers now */
ret = 0;
unsigned qib_cc_table_size;
module_param_named(cc_table_size, qib_cc_table_size, uint, S_IRUGO);
MODULE_PARM_DESC(cc_table_size, "Congestion control table entries 0 (CCA disabled - default), min = 128, max = 1984");
-/*
- * qib_wc_pat parameter:
- * 0 is WC via MTRR
- * 1 is WC via PAT
- * If PAT initialization fails, code reverts back to MTRR
- */
-unsigned qib_wc_pat = 1; /* default (1) is to use PAT, not MTRR */
-module_param_named(wc_pat, qib_wc_pat, uint, S_IRUGO);
-MODULE_PARM_DESC(wc_pat, "enable write-combining via PAT mechanism");
static void verify_interrupt(unsigned long);
spin_unlock(&dd->pport[pidx].cc_shadow_lock);
}
- if (!qib_wc_pat)
- qib_disable_wc(dd);
+ qib_disable_wc(dd);
if (dd->pioavailregs_dma) {
dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
goto bail;
}
- if (!qib_wc_pat) {
- ret = qib_enable_wc(dd);
- if (ret) {
- qib_dev_err(dd,
- "Write combining not enabled (err %d): performance may be poor\n",
- -ret);
- ret = 0;
- }
+ ret = qib_enable_wc(dd);
+ if (ret) {
+ qib_dev_err(dd,
+ "Write combining not enabled (err %d): performance may be poor\n",
+ -ret);
+ ret = 0;
}
qib_verify_pioperf(dd);
}
if (!ret) {
- int cookie;
-
- cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 0);
- if (cookie < 0) {
- {
- qib_devinfo(dd->pcidev,
- "mtrr_add() WC for PIO bufs failed (%d)\n",
- cookie);
- ret = -EINVAL;
- }
- } else {
- dd->wc_cookie = cookie;
- dd->wc_base = (unsigned long) pioaddr;
- dd->wc_len = (unsigned long) piolen;
- }
+ dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen);
+ if (dd->wc_cookie < 0)
+ ret = -EINVAL;
}
return ret;
*/
void qib_disable_wc(struct qib_devdata *dd)
{
- if (dd->wc_cookie) {
- int r;
-
- r = mtrr_del(dd->wc_cookie, dd->wc_base,
- dd->wc_len);
- if (r < 0)
- qib_devinfo(dd->pcidev,
- "mtrr_del(%lx, %lx, %lx) failed: %d\n",
- dd->wc_cookie, dd->wc_base,
- dd->wc_len, r);
- dd->wc_cookie = 0; /* even on failure */
- }
+ arch_phys_wc_del(dd->wc_cookie);
}
/**
rx->rx_ring[i].mapping,
GFP_KERNEL)) {
ipoib_warn(priv, "failed to allocate receive buffer %d\n", i);
- ret = -ENOMEM;
- goto err_count;
+ ret = -ENOMEM;
+ goto err_count;
}
ret = ipoib_cm_post_receive_nonsrq(dev, rx, &t->wr, t->sge, i);
if (ret) {
#define NR_GIC_CPU_IF 8
static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly;
-/*
- * Supported arch specific GIC irq extension.
- * Default make them NULL.
- */
-struct irq_chip gic_arch_extn = {
- .irq_eoi = NULL,
- .irq_mask = NULL,
- .irq_unmask = NULL,
- .irq_retrigger = NULL,
- .irq_set_type = NULL,
- .irq_set_wake = NULL,
-};
-
#ifndef MAX_GIC_NR
#define MAX_GIC_NR 1
#endif
static void gic_mask_irq(struct irq_data *d)
{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&irq_controller_lock, flags);
gic_poke_irq(d, GIC_DIST_ENABLE_CLEAR);
- if (gic_arch_extn.irq_mask)
- gic_arch_extn.irq_mask(d);
- raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
}
static void gic_unmask_irq(struct irq_data *d)
{
- unsigned long flags;
-
- raw_spin_lock_irqsave(&irq_controller_lock, flags);
- if (gic_arch_extn.irq_unmask)
- gic_arch_extn.irq_unmask(d);
gic_poke_irq(d, GIC_DIST_ENABLE_SET);
- raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
}
static void gic_eoi_irq(struct irq_data *d)
{
- if (gic_arch_extn.irq_eoi) {
- raw_spin_lock(&irq_controller_lock);
- gic_arch_extn.irq_eoi(d);
- raw_spin_unlock(&irq_controller_lock);
- }
-
writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
}
{
void __iomem *base = gic_dist_base(d);
unsigned int gicirq = gic_irq(d);
- unsigned long flags;
- int ret;
/* Interrupt configuration for SGIs can't be changed */
if (gicirq < 16)
type != IRQ_TYPE_EDGE_RISING)
return -EINVAL;
- raw_spin_lock_irqsave(&irq_controller_lock, flags);
-
- if (gic_arch_extn.irq_set_type)
- gic_arch_extn.irq_set_type(d, type);
-
- ret = gic_configure_irq(gicirq, type, base, NULL);
-
- raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
-
- return ret;
-}
-
-static int gic_retrigger(struct irq_data *d)
-{
- if (gic_arch_extn.irq_retrigger)
- return gic_arch_extn.irq_retrigger(d);
-
- /* the genirq layer expects 0 if we can't retrigger in hardware */
- return 0;
+ return gic_configure_irq(gicirq, type, base, NULL);
}
#ifdef CONFIG_SMP
}
#endif
-#ifdef CONFIG_PM
-static int gic_set_wake(struct irq_data *d, unsigned int on)
-{
- int ret = -ENXIO;
-
- if (gic_arch_extn.irq_set_wake)
- ret = gic_arch_extn.irq_set_wake(d, on);
-
- return ret;
-}
-
-#else
-#define gic_set_wake NULL
-#endif
-
static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
{
u32 irqstat, irqnr;
.irq_unmask = gic_unmask_irq,
.irq_eoi = gic_eoi_irq,
.irq_set_type = gic_set_type,
- .irq_retrigger = gic_retrigger,
#ifdef CONFIG_SMP
.irq_set_affinity = gic_set_affinity,
#endif
- .irq_set_wake = gic_set_wake,
.irq_get_irqchip_state = gic_irq_get_irqchip_state,
.irq_set_irqchip_state = gic_irq_set_irqchip_state,
};
set_handle_irq(gic_handle_irq);
}
- gic_chip.flags |= gic_arch_extn.flags;
gic_dist_init(gic);
gic_cpu_init(gic);
gic_pm_init(gic);
switch (r) {
/* async */
- case -EINPROGRESS:
case -EBUSY:
wait_for_completion(&ctx->restart);
reinit_completion(&ctx->restart);
+ /* fall through*/
+ case -EINPROGRESS:
ctx->req = NULL;
ctx->cc_sector++;
continue;
struct dm_crypt_io *io = container_of(ctx, struct dm_crypt_io, ctx);
struct crypt_config *cc = io->cc;
- if (error == -EINPROGRESS)
+ if (error == -EINPROGRESS) {
+ complete(&ctx->restart);
return;
+ }
if (!error && cc->iv_gen_ops && cc->iv_gen_ops->post)
error = cc->iv_gen_ops->post(cc, iv_of_dmreq(cc, dmreq), dmreq);
crypt_free_req(cc, req_of_dmreq(cc, dmreq), io->base_bio);
if (!atomic_dec_and_test(&ctx->cc_pending))
- goto done;
+ return;
if (bio_data_dir(io->base_bio) == READ)
kcryptd_crypt_read_done(io);
else
kcryptd_crypt_write_io_submit(io, 1);
-done:
- if (!completion_done(&ctx->restart))
- complete(&ctx->restart);
}
static void kcryptd_crypt(struct work_struct *work)
goto err_unlock_md_type;
}
- if (dm_get_md_type(md) == DM_TYPE_NONE)
+ if (dm_get_md_type(md) == DM_TYPE_NONE) {
/* Initial table load: acquire type of table. */
dm_set_md_type(md, dm_table_get_type(t));
- else if (dm_get_md_type(md) != dm_table_get_type(t)) {
+
+ /* setup md->queue to reflect md's type (may block) */
+ r = dm_setup_md_queue(md);
+ if (r) {
+ DMWARN("unable to set up device queue for new table.");
+ goto err_unlock_md_type;
+ }
+ } else if (dm_get_md_type(md) != dm_table_get_type(t)) {
DMWARN("can't change device type after initial table load.");
r = -EINVAL;
goto err_unlock_md_type;
}
- /* setup md->queue to reflect md's type (may block) */
- r = dm_setup_md_queue(md);
- if (r) {
- DMWARN("unable to set up device queue for new table.");
- goto err_unlock_md_type;
- }
dm_unlock_md_type(md);
/* stage inactive table */
dm_put(md);
}
-static void free_rq_clone(struct request *clone)
+static void free_rq_clone(struct request *clone, bool must_be_mapped)
{
struct dm_rq_target_io *tio = clone->end_io_data;
struct mapped_device *md = tio->md;
+ WARN_ON_ONCE(must_be_mapped && !clone->q);
+
blk_rq_unprep_clone(clone);
- if (clone->q->mq_ops)
+ if (md->type == DM_TYPE_MQ_REQUEST_BASED)
+ /* stacked on blk-mq queue(s) */
tio->ti->type->release_clone_rq(clone);
else if (!md->queue->mq_ops)
/* request_fn queue stacked on request_fn queue(s) */
free_clone_request(md, clone);
+ /*
+ * NOTE: for the blk-mq queue stacked on request_fn queue(s) case:
+ * no need to call free_clone_request() because we leverage blk-mq by
+ * allocating the clone at the end of the blk-mq pdu (see: clone_rq)
+ */
if (!md->queue->mq_ops)
free_rq_tio(tio);
rq->sense_len = clone->sense_len;
}
- free_rq_clone(clone);
+ free_rq_clone(clone, true);
if (!rq->q->mq_ops)
blk_end_request_all(rq, error);
else
}
if (clone)
- free_rq_clone(clone);
+ free_rq_clone(clone, false);
}
/*
{
struct request_queue *q = NULL;
- if (md->queue->elevator)
- return 0;
-
/* Fully initialize the queue */
q = blk_init_allocated_queue(md->queue, dm_request_fn, NULL);
if (!q)
if (mddev->sysfs_state)
sysfs_put(mddev->sysfs_state);
+ if (mddev->queue)
+ blk_cleanup_queue(mddev->queue);
if (mddev->gendisk) {
del_gendisk(mddev->gendisk);
put_disk(mddev->gendisk);
}
- if (mddev->queue)
- blk_cleanup_queue(mddev->queue);
kfree(mddev);
}
.planar = false,
},
{
- .desc = "UYVY 4:2:2",
- .pixelformat = V4L2_PIX_FMT_UYVY,
+ .desc = "YVYU 4:2:2",
+ .pixelformat = V4L2_PIX_FMT_YVYU,
.mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
.bpp = 2,
.planar = false,
switch (fmt->pixelformat) {
case V4L2_PIX_FMT_YUYV:
- case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YVYU:
widthy = fmt->width * 2;
widthuv = 0;
break;
case V4L2_PIX_FMT_YUV420:
case V4L2_PIX_FMT_YVU420:
mcam_reg_write_mask(cam, REG_CTRL0,
- C0_DF_YUV | C0_YUV_420PL | C0_YUVE_YVYU, C0_DF_MASK);
+ C0_DF_YUV | C0_YUV_420PL | C0_YUVE_VYUY, C0_DF_MASK);
break;
case V4L2_PIX_FMT_YUYV:
mcam_reg_write_mask(cam, REG_CTRL0,
- C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_UYVY, C0_DF_MASK);
+ C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_NOSWAP, C0_DF_MASK);
break;
- case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YVYU:
mcam_reg_write_mask(cam, REG_CTRL0,
- C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, C0_DF_MASK);
+ C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_SWAP24, C0_DF_MASK);
break;
case V4L2_PIX_FMT_JPEG:
mcam_reg_write_mask(cam, REG_CTRL0,
#define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */
#define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */
#define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */
-#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */
-#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */
-#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */
-#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */
+#define C0_YUVE_NOSWAP 0x00000000 /* no bytes swapping */
+#define C0_YUVE_SWAP13 0x00010000 /* swap byte 1 and 3 */
+#define C0_YUVE_SWAP24 0x00020000 /* swap byte 2 and 4 */
+#define C0_YUVE_SWAP1324 0x00030000 /* swap bytes 1&3 and 2&4 */
/* Bayer bits 18,19 if needed */
#define C0_EOF_VSYNC 0x00400000 /* Generate EOF by VSYNC */
#define C0_VEDGE_CTRL 0x00800000 /* Detect falling edge of VSYNC */
#define VIN_MAX_WIDTH 2048
#define VIN_MAX_HEIGHT 2048
+#define TIMEOUT_MS 100
+
enum chip_id {
RCAR_GEN2,
RCAR_H1,
if (priv->state == STOPPING) {
priv->request_to_stop = true;
spin_unlock_irq(&priv->lock);
- wait_for_completion(&priv->capture_stop);
+ if (!wait_for_completion_timeout(
+ &priv->capture_stop,
+ msecs_to_jiffies(TIMEOUT_MS)))
+ priv->state = STOPPED;
spin_lock_irq(&priv->lock);
}
}
md->reset_done &= ~type;
}
+int mmc_access_rpmb(struct mmc_queue *mq)
+{
+ struct mmc_blk_data *md = mq->data;
+ /*
+ * If this is a RPMB partition access, return ture
+ */
+ if (md && md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
+ return true;
+
+ return false;
+}
+
static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
{
struct mmc_blk_data *md = mq->data;
return BLKPREP_KILL;
}
- if (mq && mmc_card_removed(mq->card))
+ if (mq && (mmc_card_removed(mq->card) || mmc_access_rpmb(mq)))
return BLKPREP_KILL;
req->cmd_flags |= REQ_DONTPREP;
extern int mmc_packed_init(struct mmc_queue *, struct mmc_card *);
extern void mmc_packed_clean(struct mmc_queue *);
+extern int mmc_access_rpmb(struct mmc_queue *);
+
#endif
switch (mode) {
case PM_HIBERNATION_PREPARE:
case PM_SUSPEND_PREPARE:
+ case PM_RESTORE_PREPARE:
spin_lock_irqsave(&host->lock, flags);
host->rescan_disable = 1;
spin_unlock_irqrestore(&host->lock, flags);
host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
/* Forward link the descriptor list */
- for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
+ for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) {
p->des3 = cpu_to_le32(host->sg_dma +
(sizeof(struct idmac_desc) * (i + 1)));
+ p->des1 = 0;
+ }
/* Set the last descriptor as the end-of-ring descriptor */
p->des3 = cpu_to_le32(host->sg_dma);
int gpio_cd = mmc_gpio_get_cd(mmc);
/* Use platform get_cd function, else try onboard card detect */
- if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
+ if ((brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) ||
+ (mmc->caps & MMC_CAP_NONREMOVABLE))
present = 1;
else if (!IS_ERR_VALUE(gpio_cd))
present = gpio_cd;
host = mmc_priv(mmc);
host->mmc = mmc;
host->addr = reg;
- host->timeout = msecs_to_jiffies(1000);
+ host->timeout = msecs_to_jiffies(10000);
host->ccs_enable = !pd || !pd->ccs_unsupported;
host->clk_ctrl2_enable = pd && pd->clk_ctrl2_present;
#include <net/bond_3ad.h>
#include <net/bond_alb.h>
+#include "bonding_priv.h"
+
/*---------------------------- Module parameters ----------------------------*/
/* monitor all links that often (in milliseconds). <=0 disables monitoring */
int bond_create(struct net *net, const char *name)
{
struct net_device *bond_dev;
+ struct bonding *bond;
+ struct alb_bond_info *bond_info;
int res;
rtnl_lock();
return -ENOMEM;
}
+ /*
+ * Initialize rx_hashtbl_used_head to RLB_NULL_INDEX.
+ * It is set to 0 by default which is wrong.
+ */
+ bond = netdev_priv(bond_dev);
+ bond_info = &(BOND_ALB_INFO(bond));
+ bond_info->rx_hashtbl_used_head = RLB_NULL_INDEX;
+
dev_net_set(bond_dev, net);
bond_dev->rtnl_link_ops = &bond_link_ops;
#include <net/netns/generic.h>
#include <net/bonding.h>
+#include "bonding_priv.h"
static void *bond_info_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(RCU)
--- /dev/null
+/*
+ * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'.
+ *
+ * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
+ * NCM: Network and Communications Management, Inc.
+ *
+ * BUT, I'm the one who modified it for ethernet, so:
+ * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _BONDING_PRIV_H
+#define _BONDING_PRIV_H
+
+#define DRV_VERSION "3.7.1"
+#define DRV_RELDATE "April 27, 2011"
+#define DRV_NAME "bonding"
+#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
+
+#define bond_version DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n"
+
+#endif
config CAN_GRCAN
tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices"
- depends on OF
+ depends on OF && HAS_DMA
---help---
Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN.
Note that the driver supports little endian, even though little
if (msg->u.rx_can_header.flag & (MSG_FLAG_ERROR_FRAME |
MSG_FLAG_NERR)) {
- netdev_err(priv->netdev, "Unknow error (flags: 0x%02x)\n",
+ netdev_err(priv->netdev, "Unknown error (flags: 0x%02x)\n",
msg->u.rx_can_header.flag);
stats->rx_errors++;
char *s;
if (!ecard_readchunk(&cd, ec, 0xf5, 0)) {
- printk(KERN_ERR "%s: unable to read podule description string\n",
+ printk(KERN_ERR "%s: unable to read module description string\n",
dev_name(&ec->dev));
goto no_addr;
}
/* Tx buffer control flags
*/
#define MSGDMA_DESC_CTL_TX_FIRST (MSGDMA_DESC_CTL_GEN_SOP | \
- MSGDMA_DESC_CTL_TR_ERR_IRQ | \
MSGDMA_DESC_CTL_GO)
-#define MSGDMA_DESC_CTL_TX_MIDDLE (MSGDMA_DESC_CTL_TR_ERR_IRQ | \
- MSGDMA_DESC_CTL_GO)
+#define MSGDMA_DESC_CTL_TX_MIDDLE (MSGDMA_DESC_CTL_GO)
#define MSGDMA_DESC_CTL_TX_LAST (MSGDMA_DESC_CTL_GEN_EOP | \
MSGDMA_DESC_CTL_TR_COMP_IRQ | \
- MSGDMA_DESC_CTL_TR_ERR_IRQ | \
MSGDMA_DESC_CTL_GO)
#define MSGDMA_DESC_CTL_TX_SINGLE (MSGDMA_DESC_CTL_GEN_SOP | \
"RCV pktstatus %08X pktlength %08X\n",
pktstatus, pktlength);
+ /* DMA trasfer from TSE starts with 2 aditional bytes for
+ * IP payload alignment. Status returned by get_rx_status()
+ * contains DMA transfer length. Packet is 2 bytes shorter.
+ */
+ pktlength -= 2;
+
count++;
next_entry = (++priv->rx_cons) % priv->rx_ring_size;
struct altera_tse_private *priv = netdev_priv(dev);
struct phy_device *phydev;
struct device_node *phynode;
+ bool fixed_link = false;
+ int rc = 0;
/* Avoid init phy in case of no phy present */
if (!priv->phy_iface)
phynode = of_parse_phandle(priv->device->of_node, "phy-handle", 0);
if (!phynode) {
- netdev_dbg(dev, "no phy-handle found\n");
- if (!priv->mdio) {
- netdev_err(dev,
- "No phy-handle nor local mdio specified\n");
- return -ENODEV;
+ /* check if a fixed-link is defined in device-tree */
+ if (of_phy_is_fixed_link(priv->device->of_node)) {
+ rc = of_phy_register_fixed_link(priv->device->of_node);
+ if (rc < 0) {
+ netdev_err(dev, "cannot register fixed PHY\n");
+ return rc;
+ }
+
+ /* In the case of a fixed PHY, the DT node associated
+ * to the PHY is the Ethernet MAC DT node.
+ */
+ phynode = of_node_get(priv->device->of_node);
+ fixed_link = true;
+
+ netdev_dbg(dev, "fixed-link detected\n");
+ phydev = of_phy_connect(dev, phynode,
+ &altera_tse_adjust_link,
+ 0, priv->phy_iface);
+ } else {
+ netdev_dbg(dev, "no phy-handle found\n");
+ if (!priv->mdio) {
+ netdev_err(dev, "No phy-handle nor local mdio specified\n");
+ return -ENODEV;
+ }
+ phydev = connect_local_phy(dev);
}
- phydev = connect_local_phy(dev);
} else {
netdev_dbg(dev, "phy-handle found\n");
phydev = of_phy_connect(dev, phynode,
/* Broken HW is sometimes missing the pull-up resistor on the
* MDIO line, which results in reads to non-existent devices returning
* 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
- * device as well.
+ * device as well. If a fixed-link is used the phy_id is always 0.
* Note: phydev->phy_id is the result of reading the UID PHY registers.
*/
- if (phydev->phy_id == 0) {
+ if ((phydev->phy_id == 0) && !fixed_link) {
netdev_err(dev, "Bad PHY UID 0x%08x\n", phydev->phy_id);
phy_disconnect(phydev);
return -ENODEV;
config AMD_XGBE
tristate "AMD 10GbE Ethernet driver"
- depends on (OF_NET || ACPI) && HAS_IOMEM
+ depends on (OF_NET || ACPI) && HAS_IOMEM && HAS_DMA
select PHYLIB
select AMD_XGBE_PHY
select BITREVERSE
config ARC_EMAC
tristate "ARC EMAC support"
select ARC_EMAC_CORE
- depends on OF_IRQ
- depends on OF_NET
+ depends on OF_IRQ && OF_NET && HAS_DMA
---help---
On some legacy ARC (Synopsys) FPGA boards such as ARCAngel4/ML50x
non-standard on-chip ethernet device ARC EMAC 10/100 is used.
config EMAC_ROCKCHIP
tristate "Rockchip EMAC support"
select ARC_EMAC_CORE
- depends on OF_IRQ && OF_NET && REGULATOR
+ depends on OF_IRQ && OF_NET && REGULATOR && HAS_DMA
---help---
Support for Rockchip RK3066/RK3188 EMAC ethernet controllers.
This selects Rockchip SoC glue layer support for the
#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8
#define TWSI_CTRL_SW_LDSTART 0x800
#define TWSI_CTRL_HW_LDSTART 0x1000
-#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x0x7F
+#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F
#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15
#define TWSI_CTRL_LD_EXIST 0x400000
#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3
u32 jbr; /* RO # of xmited jabber count*/
u32 bytes; /* RO # of xmited byte count */
u32 pok; /* RO # of xmited good pkt */
- u32 uc; /* RO (0x0x4f0)# of xmited unitcast pkt */
+ u32 uc; /* RO (0x4f0) # of xmited unicast pkt */
};
struct bcm_sysport_mib {
/* Poll again if more events arrived in the meantime */
if (bgmac_read(bgmac, BGMAC_INT_STATUS) & (BGMAC_IS_TX0 | BGMAC_IS_RX))
- return handled;
+ return weight;
if (handled < weight) {
napi_complete(napi);
};
enum bnx2x_tpa_mode_t {
+ TPA_MODE_DISABLED,
TPA_MODE_LRO,
TPA_MODE_GRO
};
/* TPA related */
struct bnx2x_agg_info *tpa_info;
- u8 disable_tpa;
#ifdef BNX2X_STOP_ON_ERROR
u64 tpa_queue_used;
#endif
#define USING_MSIX_FLAG (1 << 5)
#define USING_MSI_FLAG (1 << 6)
#define DISABLE_MSI_FLAG (1 << 7)
-#define TPA_ENABLE_FLAG (1 << 8)
#define NO_MCP_FLAG (1 << 9)
-#define GRO_ENABLE_FLAG (1 << 10)
#define MF_FUNC_DIS (1 << 11)
#define OWN_CNIC_IRQ (1 << 12)
#define NO_ISCSI_OOO_FLAG (1 << 13)
u16 frag_size, pages;
#ifdef BNX2X_STOP_ON_ERROR
/* sanity check */
- if (fp->disable_tpa &&
+ if (fp->mode == TPA_MODE_DISABLED &&
(CQE_TYPE_START(cqe_fp_type) ||
CQE_TYPE_STOP(cqe_fp_type)))
- BNX2X_ERR("START/STOP packet while disable_tpa type %x\n",
+ BNX2X_ERR("START/STOP packet while TPA disabled, type %x\n",
CQE_TYPE(cqe_fp_type));
#endif
DP(NETIF_MSG_IFUP,
"mtu %d rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size);
- if (!fp->disable_tpa) {
+ if (fp->mode != TPA_MODE_DISABLED) {
/* Fill the per-aggregation pool */
for (i = 0; i < MAX_AGG_QS(bp); i++) {
struct bnx2x_agg_info *tpa_info =
BNX2X_ERR("Failed to allocate TPA skb pool for queue[%d] - disabling TPA on this queue!\n",
j);
bnx2x_free_tpa_pool(bp, fp, i);
- fp->disable_tpa = 1;
+ fp->mode = TPA_MODE_DISABLED;
break;
}
dma_unmap_addr_set(first_buf, mapping, 0);
ring_prod);
bnx2x_free_tpa_pool(bp, fp,
MAX_AGG_QS(bp));
- fp->disable_tpa = 1;
+ fp->mode = TPA_MODE_DISABLED;
ring_prod = 0;
break;
}
bnx2x_free_rx_bds(fp);
- if (!fp->disable_tpa)
+ if (fp->mode != TPA_MODE_DISABLED)
bnx2x_free_tpa_pool(bp, fp, MAX_AGG_QS(bp));
}
}
/* set the tpa flag for each queue. The tpa flag determines the queue
* minimal size so it must be set prior to queue memory allocation
*/
- fp->disable_tpa = !(bp->flags & TPA_ENABLE_FLAG ||
- (bp->flags & GRO_ENABLE_FLAG &&
- bnx2x_mtu_allows_gro(bp->dev->mtu)));
- if (bp->flags & TPA_ENABLE_FLAG)
+ if (bp->dev->features & NETIF_F_LRO)
fp->mode = TPA_MODE_LRO;
- else if (bp->flags & GRO_ENABLE_FLAG)
+ else if (bp->dev->features & NETIF_F_GRO &&
+ bnx2x_mtu_allows_gro(bp->dev->mtu))
fp->mode = TPA_MODE_GRO;
+ else
+ fp->mode = TPA_MODE_DISABLED;
- /* We don't want TPA on an FCoE L2 ring */
- if (IS_FCOE_FP(fp))
- fp->disable_tpa = 1;
+ /* We don't want TPA if it's disabled in bp
+ * or if this is an FCoE L2 ring.
+ */
+ if (bp->disable_tpa || IS_FCOE_FP(fp))
+ fp->mode = TPA_MODE_DISABLED;
}
int bnx2x_load_cnic(struct bnx2x *bp)
/*
* Zero fastpath structures preserving invariants like napi, which are
* allocated only once, fp index, max_cos, bp pointer.
- * Also set fp->disable_tpa and txdata_ptr.
+ * Also set fp->mode and txdata_ptr.
*/
DP(NETIF_MSG_IFUP, "num queues: %d", bp->num_queues);
for_each_queue(bp, i)
if ((bp->state == BNX2X_STATE_CLOSED) ||
(bp->state == BNX2X_STATE_ERROR) ||
- (bp->flags & (TPA_ENABLE_FLAG | GRO_ENABLE_FLAG)))
+ (bp->dev->features & (NETIF_F_LRO | NETIF_F_GRO)))
return LL_FLUSH_FAILED;
if (!bnx2x_fp_lock_poll(fp))
* In these cases we disable the queue
* Min size is different for OOO, TPA and non-TPA queues
*/
- if (ring_size < (fp->disable_tpa ?
+ if (ring_size < (fp->mode == TPA_MODE_DISABLED ?
MIN_RX_SIZE_NONTPA : MIN_RX_SIZE_TPA)) {
/* release memory allocated for this queue */
bnx2x_free_fp_mem_at(bp, index);
{
struct bnx2x *bp = netdev_priv(dev);
+ if (pci_num_vf(bp->pdev)) {
+ netdev_features_t changed = dev->features ^ features;
+
+ /* Revert the requested changes in features if they
+ * would require internal reload of PF in bnx2x_set_features().
+ */
+ if (!(features & NETIF_F_RXCSUM) && !bp->disable_tpa) {
+ features &= ~NETIF_F_RXCSUM;
+ features |= dev->features & NETIF_F_RXCSUM;
+ }
+
+ if (changed & NETIF_F_LOOPBACK) {
+ features &= ~NETIF_F_LOOPBACK;
+ features |= dev->features & NETIF_F_LOOPBACK;
+ }
+ }
+
/* TPA requires Rx CSUM offloading */
if (!(features & NETIF_F_RXCSUM)) {
features &= ~NETIF_F_LRO;
features &= ~NETIF_F_GRO;
}
- /* Note: do not disable SW GRO in kernel when HW GRO is off */
- if (bp->disable_tpa)
- features &= ~NETIF_F_LRO;
-
return features;
}
int bnx2x_set_features(struct net_device *dev, netdev_features_t features)
{
struct bnx2x *bp = netdev_priv(dev);
- u32 flags = bp->flags;
- u32 changes;
+ netdev_features_t changes = features ^ dev->features;
bool bnx2x_reload = false;
+ int rc;
- if (features & NETIF_F_LRO)
- flags |= TPA_ENABLE_FLAG;
- else
- flags &= ~TPA_ENABLE_FLAG;
-
- if (features & NETIF_F_GRO)
- flags |= GRO_ENABLE_FLAG;
- else
- flags &= ~GRO_ENABLE_FLAG;
-
- if (features & NETIF_F_LOOPBACK) {
- if (bp->link_params.loopback_mode != LOOPBACK_BMAC) {
- bp->link_params.loopback_mode = LOOPBACK_BMAC;
- bnx2x_reload = true;
- }
- } else {
- if (bp->link_params.loopback_mode != LOOPBACK_NONE) {
- bp->link_params.loopback_mode = LOOPBACK_NONE;
- bnx2x_reload = true;
+ /* VFs or non SRIOV PFs should be able to change loopback feature */
+ if (!pci_num_vf(bp->pdev)) {
+ if (features & NETIF_F_LOOPBACK) {
+ if (bp->link_params.loopback_mode != LOOPBACK_BMAC) {
+ bp->link_params.loopback_mode = LOOPBACK_BMAC;
+ bnx2x_reload = true;
+ }
+ } else {
+ if (bp->link_params.loopback_mode != LOOPBACK_NONE) {
+ bp->link_params.loopback_mode = LOOPBACK_NONE;
+ bnx2x_reload = true;
+ }
}
}
- changes = flags ^ bp->flags;
-
/* if GRO is changed while LRO is enabled, don't force a reload */
- if ((changes & GRO_ENABLE_FLAG) && (flags & TPA_ENABLE_FLAG))
- changes &= ~GRO_ENABLE_FLAG;
+ if ((changes & NETIF_F_GRO) && (features & NETIF_F_LRO))
+ changes &= ~NETIF_F_GRO;
/* if GRO is changed while HW TPA is off, don't force a reload */
- if ((changes & GRO_ENABLE_FLAG) && bp->disable_tpa)
- changes &= ~GRO_ENABLE_FLAG;
+ if ((changes & NETIF_F_GRO) && bp->disable_tpa)
+ changes &= ~NETIF_F_GRO;
if (changes)
bnx2x_reload = true;
- bp->flags = flags;
-
if (bnx2x_reload) {
- if (bp->recovery_state == BNX2X_RECOVERY_DONE)
- return bnx2x_reload_if_running(dev);
+ if (bp->recovery_state == BNX2X_RECOVERY_DONE) {
+ dev->features = features;
+ rc = bnx2x_reload_if_running(dev);
+ return rc ? rc : 1;
+ }
/* else: bnx2x_nic_load() will be called at end of recovery */
}
}
bp = netdev_priv(dev);
+ if (pci_num_vf(bp->pdev)) {
+ DP(BNX2X_MSG_IOV, "VFs are enabled, can not change MTU\n");
+ return -EPERM;
+ }
+
if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
BNX2X_ERR("Handling parity error recovery. Try again later\n");
return -EAGAIN;
{
int i;
- if (fp->disable_tpa)
+ if (fp->mode == TPA_MODE_DISABLED)
return;
for (i = 0; i < last; i++)
"set ring params command parameters: rx_pending = %d, tx_pending = %d\n",
ering->rx_pending, ering->tx_pending);
+ if (pci_num_vf(bp->pdev)) {
+ DP(BNX2X_MSG_IOV,
+ "VFs are enabled, can not change ring parameters\n");
+ return -EPERM;
+ }
+
if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
DP(BNX2X_MSG_ETHTOOL,
"Handling parity error recovery. Try again later\n");
u8 is_serdes, link_up;
int rc, cnt = 0;
+ if (pci_num_vf(bp->pdev)) {
+ DP(BNX2X_MSG_IOV,
+ "VFs are enabled, can not perform self test\n");
+ return;
+ }
+
if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
netdev_err(bp->dev,
"Handling parity error recovery. Try again later\n");
channels->rx_count, channels->tx_count, channels->other_count,
channels->combined_count);
+ if (pci_num_vf(bp->pdev)) {
+ DP(BNX2X_MSG_IOV, "VFs are enabled, can not set channels\n");
+ return -EPERM;
+ }
+
/* We don't support separate rx / tx channels.
* We don't allow setting 'other' channels.
*/
__set_bit(BNX2X_Q_FLG_FORCE_DEFAULT_PRI, &flags);
}
- if (!fp->disable_tpa) {
+ if (fp->mode != TPA_MODE_DISABLED) {
__set_bit(BNX2X_Q_FLG_TPA, &flags);
__set_bit(BNX2X_Q_FLG_TPA_IPV6, &flags);
if (fp->mode == TPA_MODE_GRO)
u16 sge_sz = 0;
u16 tpa_agg_size = 0;
- if (!fp->disable_tpa) {
+ if (fp->mode != TPA_MODE_DISABLED) {
pause->sge_th_lo = SGE_TH_LO(bp);
pause->sge_th_hi = SGE_TH_HI(bp);
/* This flag is relevant for E1x only.
* E2 doesn't have a TPA configuration in a function level.
*/
- flags |= (bp->flags & TPA_ENABLE_FLAG) ? FUNC_FLG_TPA : 0;
+ flags |= (bp->dev->features & NETIF_F_LRO) ? FUNC_FLG_TPA : 0;
func_init.func_flgs = flags;
func_init.pf_id = BP_FUNC(bp);
/* Set TPA flags */
if (bp->disable_tpa) {
- bp->flags &= ~(TPA_ENABLE_FLAG | GRO_ENABLE_FLAG);
+ bp->dev->hw_features &= ~NETIF_F_LRO;
bp->dev->features &= ~NETIF_F_LRO;
- } else {
- bp->flags |= (TPA_ENABLE_FLAG | GRO_ENABLE_FLAG);
- bp->dev->features |= NETIF_F_LRO;
}
if (CHIP_IS_E1(bp))
bool is_vf;
int cnic_cnt;
+ /* Management FW 'remembers' living interfaces. Allow it some time
+ * to forget previously living interfaces, allowing a proper re-load.
+ */
+ if (is_kdump_kernel())
+ msleep(5000);
+
/* An estimated maximum supported CoS number according to the chip
* version.
* We will try to roughly estimate the maximum number of CoSes this chip
bnx2x_vfpf_prep(bp, &req->first_tlv, CHANNEL_TLV_SETUP_Q, sizeof(*req));
/* select tpa mode to request */
- if (!fp->disable_tpa) {
+ if (fp->mode != TPA_MODE_DISABLED) {
flags |= VFPF_QUEUE_FLG_TPA;
flags |= VFPF_QUEUE_FLG_TPA_IPV6;
if (fp->mode == TPA_MODE_GRO)
rtnl_lock();
- tp->pcierr_recovery = true;
+ /* We needn't recover from permanent error */
+ if (state == pci_channel_io_frozen)
+ tp->pcierr_recovery = true;
/* We probably don't have netdev yet */
if (!netdev || !netif_running(netdev))
/* properly align Ethernet header */
skb_reserve(skb, NET_IP_ALIGN);
+ } else {
+ bp->rx_ring[entry].addr &= ~MACB_BIT(RX_USED);
+ bp->rx_ring[entry].ctrl = 0;
}
}
for (i = 0; i < TX_RING_SIZE; i++) {
bp->queues[0].tx_ring[i].addr = 0;
bp->queues[0].tx_ring[i].ctrl = MACB_BIT(TX_USED);
- bp->queues[0].tx_head = 0;
- bp->queues[0].tx_tail = 0;
}
+ bp->queues[0].tx_head = 0;
+ bp->queues[0].tx_tail = 0;
bp->queues[0].tx_ring[TX_RING_SIZE - 1].ctrl |= MACB_BIT(TX_WRAP);
bp->rx_tail = 0;
memoffset = (mtype * (edc_size * 1024 * 1024));
else {
mc_size = EXT_MEM0_SIZE_G(t4_read_reg(adap,
- MA_EXT_MEMORY1_BAR_A));
+ MA_EXT_MEMORY0_BAR_A));
memoffset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
}
}
static int be_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
- struct net_device *dev, u32 filter_mask)
+ struct net_device *dev, u32 filter_mask,
+ int nlflags)
{
struct be_adapter *adapter = netdev_priv(dev);
int status = 0;
return ndo_dflt_bridge_getlink(skb, pid, seq, dev,
hsw_mode == PORT_FWD_TYPE_VEPA ?
BRIDGE_MODE_VEPA : BRIDGE_MODE_VEB,
- 0, 0);
+ 0, 0, nlflags);
}
#ifdef CONFIG_BE2NET_VXLAN
rcntl |= 0x40000000 | 0x00000020;
/* RGMII, RMII or MII */
- if (fep->phy_interface == PHY_INTERFACE_MODE_RGMII)
+ if (fep->phy_interface == PHY_INTERFACE_MODE_RGMII ||
+ fep->phy_interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ fep->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID ||
+ fep->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID)
rcntl |= (1 << 6);
else if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
rcntl |= (1 << 8);
{
int ret = 0;
- if (atomic_inc_and_test(&ehea_memory_hooks_registered))
+ if (atomic_inc_return(&ehea_memory_hooks_registered) > 1)
return 0;
ret = ehea_create_busmap();
out2:
unregister_reboot_notifier(&ehea_reboot_nb);
out:
+ atomic_dec(&ehea_memory_hooks_registered);
return ret;
}
static void ehea_unregister_memory_hooks(void)
{
- if (atomic_read(&ehea_memory_hooks_registered))
+ /* Only remove the hooks if we've registered them */
+ if (atomic_read(&ehea_memory_hooks_registered) == 0)
return;
unregister_reboot_notifier(&ehea_reboot_nb);
return -EINVAL;
for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++)
- if (new_mtu_oh < adapter->rx_buff_pool[i].buff_size)
+ if (new_mtu_oh <= adapter->rx_buff_pool[i].buff_size)
break;
if (i == IBMVETH_NUM_BUFF_POOLS)
for (i = 0; i < IBMVETH_NUM_BUFF_POOLS; i++) {
adapter->rx_buff_pool[i].active = 1;
- if (new_mtu_oh < adapter->rx_buff_pool[i].buff_size) {
+ if (new_mtu_oh <= adapter->rx_buff_pool[i].buff_size) {
dev->mtu = new_mtu;
vio_cmo_set_dev_desired(viodev,
ibmveth_get_desired_dma
#ifdef HAVE_BRIDGE_FILTER
static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
struct net_device *dev,
- u32 __always_unused filter_mask)
+ u32 __always_unused filter_mask, int nlflags)
#else
static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
- struct net_device *dev)
+ struct net_device *dev, int nlflags)
#endif /* HAVE_BRIDGE_FILTER */
{
struct i40e_netdev_priv *np = netdev_priv(dev);
if (!veb)
return 0;
- return ndo_dflt_bridge_getlink(skb, pid, seq, dev, veb->bridge_mode);
+ return ndo_dflt_bridge_getlink(skb, pid, seq, dev, veb->bridge_mode,
+ nlflags);
}
#endif /* HAVE_BRIDGE_ATTRIBS */
static int ixgbe_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
struct net_device *dev,
- u32 filter_mask)
+ u32 filter_mask, int nlflags)
{
struct ixgbe_adapter *adapter = netdev_priv(dev);
return 0;
return ndo_dflt_bridge_getlink(skb, pid, seq, dev,
- adapter->bridge_mode, 0, 0);
+ adapter->bridge_mode, 0, 0, nlflags);
}
static void *ixgbe_fwd_add(struct net_device *pdev, struct net_device *vdev)
np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
if (!np) {
dev_err(&pdev->dev, "missing phy-handle\n");
- return -EINVAL;
+ err = -EINVAL;
+ goto err_netdev;
}
of_property_read_u32(np, "reg", &pep->phy_addr);
pep->phy_intf = of_get_phy_mode(pdev->dev.of_node);
pep->smi_bus = mdiobus_alloc();
if (pep->smi_bus == NULL) {
err = -ENOMEM;
- goto err_base;
+ goto err_netdev;
}
pep->smi_bus->priv = pep;
pep->smi_bus->name = "pxa168_eth smi";
mdiobus_unregister(pep->smi_bus);
err_free_mdio:
mdiobus_free(pep->smi_bus);
-err_base:
- iounmap(pep->base);
err_netdev:
free_netdev(dev);
err_clk:
- clk_disable(clk);
- clk_put(clk);
+ clk_disable_unprepare(clk);
return err;
}
if (pep->phy)
phy_disconnect(pep->phy);
if (pep->clk) {
- clk_disable(pep->clk);
- clk_put(pep->clk);
- pep->clk = NULL;
+ clk_disable_unprepare(pep->clk);
}
- iounmap(pep->base);
- pep->base = NULL;
mdiobus_unregister(pep->smi_bus);
mdiobus_free(pep->smi_bus);
unregister_netdev(dev);
struct mlx4_en_priv *priv = netdev_priv(dev);
/* check if requested function is supported by the device */
- if ((hfunc == ETH_RSS_HASH_TOP &&
- !(priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_RSS_TOP)) ||
- (hfunc == ETH_RSS_HASH_XOR &&
- !(priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_RSS_XOR)))
- return -EINVAL;
+ if (hfunc == ETH_RSS_HASH_TOP) {
+ if (!(priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_RSS_TOP))
+ return -EINVAL;
+ if (!(dev->features & NETIF_F_RXHASH))
+ en_warn(priv, "Toeplitz hash function should be used in conjunction with RX hashing for optimal performance\n");
+ return 0;
+ } else if (hfunc == ETH_RSS_HASH_XOR) {
+ if (!(priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_RSS_XOR))
+ return -EINVAL;
+ if (dev->features & NETIF_F_RXHASH)
+ en_warn(priv, "Enabling both XOR Hash function and RX Hashing can limit RPS functionality\n");
+ return 0;
+ }
- priv->rss_hash_fn = hfunc;
- if (hfunc == ETH_RSS_HASH_TOP && !(dev->features & NETIF_F_RXHASH))
- en_warn(priv,
- "Toeplitz hash function should be used in conjunction with RX hashing for optimal performance\n");
- if (hfunc == ETH_RSS_HASH_XOR && (dev->features & NETIF_F_RXHASH))
- en_warn(priv,
- "Enabling both XOR Hash function and RX Hashing can limit RPS functionality\n");
- return 0;
+ return -EINVAL;
}
static int mlx4_en_get_rxfh(struct net_device *dev, u32 *ring_index, u8 *key,
priv->prof->rss_rings = rss_rings;
if (key)
memcpy(priv->rss_key, key, MLX4_EN_RSS_KEY_SIZE);
+ if (hfunc != ETH_RSS_HASH_NO_CHANGE)
+ priv->rss_hash_fn = hfunc;
if (port_up) {
err = mlx4_en_start_port(dev);
if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS)
mlx4_en_ptp_overflow_check(mdev);
+ mlx4_en_recover_from_oom(priv);
queue_delayed_work(mdev->workqueue, &priv->service_task,
SERVICE_TASK_DELAY);
}
cq_err:
while (rx_index--) {
mlx4_en_deactivate_cq(priv, priv->rx_cq[rx_index]);
- mlx4_en_free_affinity_hint(priv, i);
+ mlx4_en_free_affinity_hint(priv, rx_index);
}
for (i = 0; i < priv->rx_ring_num; i++)
mlx4_en_deactivate_rx_ring(priv, priv->rx_ring[i]);
return mlx4_en_alloc_frags(priv, rx_desc, frags, ring->page_alloc, gfp);
}
+static inline bool mlx4_en_is_ring_empty(struct mlx4_en_rx_ring *ring)
+{
+ BUG_ON((u32)(ring->prod - ring->cons) > ring->actual_size);
+ return ring->prod == ring->cons;
+}
+
static inline void mlx4_en_update_rx_prod_db(struct mlx4_en_rx_ring *ring)
{
*ring->wqres.db.db = cpu_to_be32(ring->prod & 0xffff);
ring->cons, ring->prod);
/* Unmap and free Rx buffers */
- BUG_ON((u32) (ring->prod - ring->cons) > ring->actual_size);
- while (ring->cons != ring->prod) {
+ while (!mlx4_en_is_ring_empty(ring)) {
index = ring->cons & ring->size_mask;
en_dbg(DRV, priv, "Processing descriptor:%d\n", index);
mlx4_en_free_rx_desc(priv, ring, index);
return err;
}
+/* We recover from out of memory by scheduling our napi poll
+ * function (mlx4_en_process_cq), which tries to allocate
+ * all missing RX buffers (call to mlx4_en_refill_rx_buffers).
+ */
+void mlx4_en_recover_from_oom(struct mlx4_en_priv *priv)
+{
+ int ring;
+
+ if (!priv->port_up)
+ return;
+
+ for (ring = 0; ring < priv->rx_ring_num; ring++) {
+ if (mlx4_en_is_ring_empty(priv->rx_ring[ring]))
+ napi_reschedule(&priv->rx_cq[ring]->napi);
+ }
+}
+
void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_rx_ring **pring,
u32 size, u16 stride)
ring->hwtstamp_tx_type = priv->hwtstamp_config.tx_type;
ring->queue_index = queue_index;
- if (queue_index < priv->num_tx_rings_p_up && cpu_online(queue_index))
- cpumask_set_cpu(queue_index, &ring->affinity_mask);
+ if (queue_index < priv->num_tx_rings_p_up)
+ cpumask_set_cpu_local_first(queue_index,
+ priv->mdev->dev->numa_node,
+ &ring->affinity_mask);
*pring = ring;
return 0;
err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, &ring->context,
&ring->qp, &ring->qp_state);
- if (!user_prio && cpu_online(ring->queue_index))
+ if (!cpumask_empty(&ring->affinity_mask))
netif_set_xps_queue(priv->dev, &ring->affinity_mask,
ring->queue_index);
#define MLX4_GET(dest, source, offset) \
do { \
void *__p = (char *) (source) + (offset); \
+ u64 val; \
switch (sizeof (dest)) { \
case 1: (dest) = *(u8 *) __p; break; \
case 2: (dest) = be16_to_cpup(__p); break; \
case 4: (dest) = be32_to_cpup(__p); break; \
- case 8: (dest) = be64_to_cpup(__p); break; \
+ case 8: val = get_unaligned((u64 *)__p); \
+ (dest) = be64_to_cpu(val); break; \
default: __buggy_use_of_MLX4_GET(); \
} \
} while (0)
* swaps each 4-byte word before passing it back to
* us. Therefore we need to swab it before printing.
*/
- for (i = 0; i < 4; ++i)
- ((u32 *) board_id)[i] =
- swab32(*(u32 *) (vsd + VSD_OFFSET_MLX_BOARD_ID + i * 4));
+ u32 *bid_u32 = (u32 *)board_id;
+
+ for (i = 0; i < 4; ++i) {
+ u32 *addr;
+ u32 val;
+
+ addr = (u32 *) (vsd + VSD_OFFSET_MLX_BOARD_ID + i * 4);
+ val = get_unaligned(addr);
+ val = swab32(val);
+ put_unaligned(val, &bid_u32[i]);
+ }
}
}
void mlx4_en_deactivate_tx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring);
void mlx4_en_set_num_rx_rings(struct mlx4_en_dev *mdev);
+void mlx4_en_recover_from_oom(struct mlx4_en_priv *priv);
int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_rx_ring **pring,
u32 size, u16 stride, int node);
#include <net/ip.h>
#include <net/tcp.h>
#include <asm/byteorder.h>
-#include <asm/io.h>
#include <asm/processor.h>
-#ifdef CONFIG_MTRR
-#include <asm/mtrr.h>
-#endif
#include <net/busy_poll.h>
#include "myri10ge_mcp.h"
unsigned int rdma_tags_available;
int intr_coal_delay;
__be32 __iomem *intr_coal_delay_ptr;
- int mtrr;
- int wc_enabled;
+ int wc_cookie;
int down_cnt;
wait_queue_head_t down_wq;
struct work_struct watchdog_work;
"tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
"tx_heartbeat_errors", "tx_window_errors",
/* device-specific stats */
- "tx_boundary", "WC", "irq", "MSI", "MSIX",
+ "tx_boundary", "irq", "MSI", "MSIX",
"read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
"serial_number", "watchdog_resets",
#ifdef CONFIG_MYRI10GE_DCA
data[i] = ((u64 *)&link_stats)[i];
data[i++] = (unsigned int)mgp->tx_boundary;
- data[i++] = (unsigned int)mgp->wc_enabled;
data[i++] = (unsigned int)mgp->pdev->irq;
data[i++] = (unsigned int)mgp->msi_enabled;
data[i++] = (unsigned int)mgp->msix_enabled;
mgp->board_span = pci_resource_len(pdev, 0);
mgp->iomem_base = pci_resource_start(pdev, 0);
- mgp->mtrr = -1;
- mgp->wc_enabled = 0;
-#ifdef CONFIG_MTRR
- mgp->mtrr = mtrr_add(mgp->iomem_base, mgp->board_span,
- MTRR_TYPE_WRCOMB, 1);
- if (mgp->mtrr >= 0)
- mgp->wc_enabled = 1;
-#endif
+ mgp->wc_cookie = arch_phys_wc_add(mgp->iomem_base, mgp->board_span);
mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
if (mgp->sram == NULL) {
dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
goto abort_with_state;
}
if (mgp->msix_enabled)
- dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, WC %s\n",
+ dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, MTRR %s, WC Enabled\n",
mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
- (mgp->wc_enabled ? "Enabled" : "Disabled"));
+ (mgp->wc_cookie > 0 ? "Enabled" : "Disabled"));
else
- dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
+ dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, MTRR %s, WC Enabled\n",
mgp->msi_enabled ? "MSI" : "xPIC",
pdev->irq, mgp->tx_boundary, mgp->fw_name,
- (mgp->wc_enabled ? "Enabled" : "Disabled"));
+ (mgp->wc_cookie > 0 ? "Enabled" : "Disabled"));
board_number++;
return 0;
iounmap(mgp->sram);
abort_with_mtrr:
-#ifdef CONFIG_MTRR
- if (mgp->mtrr >= 0)
- mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
-#endif
+ arch_phys_wc_del(mgp->wc_cookie);
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
mgp->cmd, mgp->cmd_bus);
pci_restore_state(pdev);
iounmap(mgp->sram);
-
-#ifdef CONFIG_MTRR
- if (mgp->mtrr >= 0)
- mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
-#endif
+ arch_phys_wc_del(mgp->wc_cookie);
myri10ge_free_slices(mgp);
kfree(mgp->msix_vectors);
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
int i, j;
struct nx_host_tx_ring *tx_ring = adapter->tx_ring;
- spin_lock(&adapter->tx_clean_lock);
+ spin_lock_bh(&adapter->tx_clean_lock);
cmd_buf = tx_ring->cmd_buf_arr;
for (i = 0; i < tx_ring->num_desc; i++) {
buffrag = cmd_buf->frag_array;
}
cmd_buf++;
}
- spin_unlock(&adapter->tx_clean_lock);
+ spin_unlock_bh(&adapter->tx_clean_lock);
}
void netxen_free_sw_resources(struct netxen_adapter *adapter)
static int rocker_port_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
struct net_device *dev,
- u32 filter_mask)
+ u32 filter_mask, int nlflags)
{
struct rocker_port *rocker_port = netdev_priv(dev);
u16 mode = BRIDGE_MODE_UNDEF;
u32 mask = BR_LEARNING | BR_LEARNING_SYNC;
return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode,
- rocker_port->brport_flags, mask);
+ rocker_port->brport_flags, mask,
+ nlflags);
}
static int rocker_port_get_phys_port_name(struct net_device *dev,
ALE_PORT_STATE,
ALE_PORT_STATE_FORWARD);
- if (ndev && slave->open)
+ if (ndev && slave->open &&
+ slave->link_interface != SGMII_LINK_MAC_PHY &&
+ slave->link_interface != XGMII_LINK_MAC_PHY)
netif_carrier_on(ndev);
} else {
writel(mac_control, GBE_REG_ADDR(slave, emac_regs,
cpsw_ale_control_set(gbe_dev->ale, slave->port_num,
ALE_PORT_STATE,
ALE_PORT_STATE_DISABLE);
- if (ndev)
+ if (ndev &&
+ slave->link_interface != SGMII_LINK_MAC_PHY &&
+ slave->link_interface != XGMII_LINK_MAC_PHY)
netif_carrier_off(ndev);
}
struct hv_netvsc_packet {
/* Bookkeeping stuff */
u32 status;
- bool part_of_skb;
bool is_data_pkt;
bool xmit_more; /* from skb */
u32 count; /* counter of batched packets */
};
+/* The context of the netvsc device */
+struct net_device_context {
+ /* point back to our device context */
+ struct hv_device *device_ctx;
+ struct delayed_work dwork;
+ struct work_struct work;
+ u32 msg_enable; /* debug level */
+};
+
/* Per netvsc device */
struct netvsc_device {
struct hv_device *dev;
struct multi_send_data msd[NR_CPUS];
u32 max_pkt; /* max number of pkt in one send, e.g. 8 */
u32 pkt_align; /* alignment bytes, e.g. 8 */
+
+ /* The net device context */
+ struct net_device_context *nd_ctx;
};
/* NdisInitialize message */
} else {
packet->page_buf_cnt = 0;
packet->total_data_buflen += msd_len;
- if (!packet->part_of_skb) {
- skb = (struct sk_buff *)(unsigned long)packet->
- send_completion_tid;
- packet->send_completion_tid = 0;
- }
}
if (msdp->pkt)
*/
ndev = net_device->ndev;
+ /* Add netvsc_device context to netvsc_device */
+ net_device->nd_ctx = netdev_priv(ndev);
+
/* Initialize the NetVSC channel extension */
init_completion(&net_device->channel_init_wait);
#include "hyperv_net.h"
-struct net_device_context {
- /* point back to our device context */
- struct hv_device *device_ctx;
- struct delayed_work dwork;
- struct work_struct work;
-};
#define RING_SIZE_MIN 64
static int ring_size = 128;
module_param(ring_size, int, S_IRUGO);
MODULE_PARM_DESC(ring_size, "Ring buffer size (# of pages)");
+static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
+ NETIF_MSG_LINK | NETIF_MSG_IFUP |
+ NETIF_MSG_IFDOWN | NETIF_MSG_RX_ERR |
+ NETIF_MSG_TX_ERR;
+
+static int debug = -1;
+module_param(debug, int, S_IRUGO);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
static void do_set_multicast(struct work_struct *w)
{
struct net_device_context *ndevctx =
struct sk_buff *skb = (struct sk_buff *)
(unsigned long)packet->send_completion_tid;
- if (!packet->part_of_skb)
- kfree(packet);
-
if (skb)
dev_kfree_skb_any(skb);
}
u32 net_trans_info;
u32 hash;
u32 skb_length;
- u32 head_room;
u32 pkt_sz;
struct hv_page_buffer page_buf[MAX_PAGE_BUFFER_COUNT];
check_size:
skb_length = skb->len;
- head_room = skb_headroom(skb);
num_data_pgs = netvsc_get_slots(skb) + 2;
if (num_data_pgs > MAX_PAGE_BUFFER_COUNT && linear) {
net_alert_ratelimited("packet too big: %u pages (%u bytes)\n",
pkt_sz = sizeof(struct hv_netvsc_packet) + RNDIS_AND_PPI_SIZE;
- if (head_room < pkt_sz) {
- packet = kmalloc(pkt_sz, GFP_ATOMIC);
- if (!packet) {
- /* out of memory, drop packet */
- netdev_err(net, "unable to alloc hv_netvsc_packet\n");
- ret = -ENOMEM;
- goto drop;
- }
- packet->part_of_skb = false;
- } else {
- /* Use the headroom for building up the packet */
- packet = (struct hv_netvsc_packet *)skb->head;
- packet->part_of_skb = true;
+ ret = skb_cow_head(skb, pkt_sz);
+ if (ret) {
+ netdev_err(net, "unable to alloc hv_netvsc_packet\n");
+ ret = -ENOMEM;
+ goto drop;
}
+ /* Use the headroom for building up the packet */
+ packet = (struct hv_netvsc_packet *)skb->head;
packet->status = 0;
packet->xmit_more = skb->xmit_more;
net->stats.tx_bytes += skb_length;
net->stats.tx_packets++;
} else {
- if (packet && !packet->part_of_skb)
- kfree(packet);
if (ret != -EAGAIN) {
dev_kfree_skb_any(skb);
net->stats.tx_dropped++;
net_device_ctx = netdev_priv(net);
net_device_ctx->device_ctx = dev;
+ net_device_ctx->msg_enable = netif_msg_init(debug, default_msg);
+ if (netif_msg_probe(net_device_ctx))
+ netdev_dbg(net, "netvsc msg_enable: %d\n",
+ net_device_ctx->msg_enable);
+
hv_set_drvdata(dev, net);
INIT_DELAYED_WORK(&net_device_ctx->dwork, netvsc_link_change);
INIT_WORK(&net_device_ctx->work, do_set_multicast);
rndis_msg = pkt->data;
- dump_rndis_message(dev, rndis_msg);
+ if (netif_msg_rx_err(net_dev->nd_ctx))
+ dump_rndis_message(dev, rndis_msg);
switch (rndis_msg->ndis_msg_type) {
case RNDIS_MSG_PACKET:
* assume the pin serves as pull-up. If direction is
* output, the default value is high.
*/
- gpio_set_value(bitbang->mdo, 1 ^ bitbang->mdo_active_low);
+ gpio_set_value_cansleep(bitbang->mdo,
+ 1 ^ bitbang->mdo_active_low);
return;
}
struct mdio_gpio_info *bitbang =
container_of(ctrl, struct mdio_gpio_info, ctrl);
- return gpio_get_value(bitbang->mdio) ^ bitbang->mdio_active_low;
+ return gpio_get_value_cansleep(bitbang->mdio) ^
+ bitbang->mdio_active_low;
}
static void mdio_set(struct mdiobb_ctrl *ctrl, int what)
container_of(ctrl, struct mdio_gpio_info, ctrl);
if (bitbang->mdo)
- gpio_set_value(bitbang->mdo, what ^ bitbang->mdo_active_low);
+ gpio_set_value_cansleep(bitbang->mdo,
+ what ^ bitbang->mdo_active_low);
else
- gpio_set_value(bitbang->mdio, what ^ bitbang->mdio_active_low);
+ gpio_set_value_cansleep(bitbang->mdio,
+ what ^ bitbang->mdio_active_low);
}
static void mdc_set(struct mdiobb_ctrl *ctrl, int what)
struct mdio_gpio_info *bitbang =
container_of(ctrl, struct mdio_gpio_info, ctrl);
- gpio_set_value(bitbang->mdc, what ^ bitbang->mdc_active_low);
+ gpio_set_value_cansleep(bitbang->mdc, what ^ bitbang->mdc_active_low);
}
static struct mdiobb_ops mdio_gpio_ops = {
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/mdio-mux.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#define DRV_VERSION "1.1"
#define DRV_DESCRIPTION "GPIO controlled MDIO bus multiplexer driver"
-#define MDIO_MUX_GPIO_MAX_BITS 8
-
struct mdio_mux_gpio_state {
- struct gpio_desc *gpio[MDIO_MUX_GPIO_MAX_BITS];
- unsigned int num_gpios;
+ struct gpio_descs *gpios;
void *mux_handle;
};
static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
void *data)
{
- int values[MDIO_MUX_GPIO_MAX_BITS];
- unsigned int n;
struct mdio_mux_gpio_state *s = data;
+ int values[s->gpios->ndescs];
+ unsigned int n;
if (current_child == desired_child)
return 0;
- for (n = 0; n < s->num_gpios; n++) {
+ for (n = 0; n < s->gpios->ndescs; n++)
values[n] = (desired_child >> n) & 1;
- }
- gpiod_set_array_cansleep(s->num_gpios, s->gpio, values);
+
+ gpiod_set_array_cansleep(s->gpios->ndescs, s->gpios->desc, values);
return 0;
}
static int mdio_mux_gpio_probe(struct platform_device *pdev)
{
struct mdio_mux_gpio_state *s;
- int num_gpios;
- unsigned int n;
int r;
- if (!pdev->dev.of_node)
- return -ENODEV;
-
- num_gpios = of_gpio_count(pdev->dev.of_node);
- if (num_gpios <= 0 || num_gpios > MDIO_MUX_GPIO_MAX_BITS)
- return -ENODEV;
-
s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
- s->num_gpios = num_gpios;
-
- for (n = 0; n < num_gpios; ) {
- struct gpio_desc *gpio = gpiod_get_index(&pdev->dev, NULL, n,
- GPIOD_OUT_LOW);
- if (IS_ERR(gpio)) {
- r = PTR_ERR(gpio);
- goto err;
- }
- s->gpio[n] = gpio;
- n++;
- }
+ s->gpios = gpiod_get_array(&pdev->dev, NULL, GPIOD_OUT_LOW);
+ if (IS_ERR(s->gpios))
+ return PTR_ERR(s->gpios);
r = mdio_mux_init(&pdev->dev,
mdio_mux_gpio_switch_fn, &s->mux_handle, s);
- if (r == 0) {
- pdev->dev.platform_data = s;
- return 0;
- }
-err:
- while (n) {
- n--;
- gpiod_put(s->gpio[n]);
+ if (r != 0) {
+ gpiod_put_array(s->gpios);
+ return r;
}
- return r;
+
+ pdev->dev.platform_data = s;
+ return 0;
}
static int mdio_mux_gpio_remove(struct platform_device *pdev)
{
- unsigned int n;
struct mdio_mux_gpio_state *s = dev_get_platdata(&pdev->dev);
mdio_mux_uninit(s->mux_handle);
- for (n = 0; n < s->num_gpios; n++)
- gpiod_put(s->gpio[n]);
+ gpiod_put_array(s->gpios);
return 0;
}
struct blkcipher_desc desc = { .tfm = state->arc4 };
unsigned ccount;
int flushed = MPPE_BITS(ibuf) & MPPE_BIT_FLUSHED;
- int sanity = 0;
struct scatterlist sg_in[1], sg_out[1];
if (isize <= PPP_HDRLEN + MPPE_OVHD) {
"mppe_decompress[%d]: ENCRYPTED bit not set!\n",
state->unit);
state->sanity_errors += 100;
- sanity = 1;
+ goto sanity_error;
}
if (!state->stateful && !flushed) {
printk(KERN_DEBUG "mppe_decompress[%d]: FLUSHED bit not set in "
"stateless mode!\n", state->unit);
state->sanity_errors += 100;
- sanity = 1;
+ goto sanity_error;
}
if (state->stateful && ((ccount & 0xff) == 0xff) && !flushed) {
printk(KERN_DEBUG "mppe_decompress[%d]: FLUSHED bit not set on "
"flag packet!\n", state->unit);
state->sanity_errors += 100;
- sanity = 1;
- }
-
- if (sanity) {
- if (state->sanity_errors < SANITY_MAX)
- return DECOMP_ERROR;
- else
- /*
- * Take LCP down if the peer is sending too many bogons.
- * We don't want to do this for a single or just a few
- * instances since it could just be due to packet corruption.
- */
- return DECOMP_FATALERROR;
+ goto sanity_error;
}
/*
*/
if (!state->stateful) {
+ /* Discard late packet */
+ if ((ccount - state->ccount) % MPPE_CCOUNT_SPACE
+ > MPPE_CCOUNT_SPACE / 2) {
+ state->sanity_errors++;
+ goto sanity_error;
+ }
+
/* RFC 3078, sec 8.1. Rekey for every packet. */
while (state->ccount != ccount) {
mppe_rekey(state, 0);
state->sanity_errors >>= 1;
return osize;
+
+sanity_error:
+ if (state->sanity_errors < SANITY_MAX)
+ return DECOMP_ERROR;
+ else
+ /* Take LCP down if the peer is sending too many bogons.
+ * We don't want to do this for a single or just a few
+ * instances since it could just be due to packet corruption.
+ */
+ return DECOMP_FATALERROR;
}
/*
/* Only change unicasts */
if (!(is_multicast_ether_addr(f->eth_addr) ||
is_zero_ether_addr(f->eth_addr))) {
- int rc = vxlan_fdb_replace(f, ip, port, vni,
+ notify |= vxlan_fdb_replace(f, ip, port, vni,
ifindex);
-
- if (rc < 0)
- return rc;
- notify |= rc;
} else
return -EOPNOTSUPP;
}
EXPORT_SYMBOL_GPL(devm_pinctrl_put);
int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps,
- bool dup, bool locked)
+ bool dup)
{
int i, ret;
struct pinctrl_maps *maps_node;
maps_node->maps = maps;
}
- if (!locked)
- mutex_lock(&pinctrl_maps_mutex);
+ mutex_lock(&pinctrl_maps_mutex);
list_add_tail(&maps_node->node, &pinctrl_maps);
- if (!locked)
- mutex_unlock(&pinctrl_maps_mutex);
+ mutex_unlock(&pinctrl_maps_mutex);
return 0;
}
int pinctrl_register_mappings(struct pinctrl_map const *maps,
unsigned num_maps)
{
- return pinctrl_register_map(maps, num_maps, true, false);
+ return pinctrl_register_map(maps, num_maps, true);
}
void pinctrl_unregister_map(struct pinctrl_map const *map)
}
int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps,
- bool dup, bool locked);
+ bool dup);
void pinctrl_unregister_map(struct pinctrl_map const *map);
extern int pinctrl_force_sleep(struct pinctrl_dev *pctldev);
dt_map->num_maps = num_maps;
list_add_tail(&dt_map->node, &p->dt_maps);
- return pinctrl_register_map(map, num_maps, false, true);
+ return pinctrl_register_map(map, num_maps, false);
}
struct pinctrl_dev *of_pinctrl_get(struct device_node *np)
if (!mtk_eint_get_mask(pctl, eint_num)) {
mtk_eint_mask(d);
unmask = 1;
+ } else {
+ unmask = 0;
}
clr_bit = 0xff << eint_offset;
MPP_FUNCTION(0x5, "audio", "mclk"),
MPP_FUNCTION(0x6, "uart0", "cts")),
MPP_MODE(63,
- MPP_FUNCTION(0x0, "gpo", NULL),
+ MPP_FUNCTION(0x0, "gpio", NULL),
MPP_FUNCTION(0x1, "spi0", "sck"),
MPP_FUNCTION(0x2, "tclk", NULL)),
MPP_MODE(64,
val = 1;
}
+ val = val << PMIC_GPIO_REG_MODE_DIR_SHIFT;
val |= pad->function << PMIC_GPIO_REG_MODE_FUNCTION_SHIFT;
val |= pad->out_value & PMIC_GPIO_REG_MODE_VALUE_SHIFT;
return ret;
val = pad->buffer_type << PMIC_GPIO_REG_OUT_TYPE_SHIFT;
- val = pad->strength << PMIC_GPIO_REG_OUT_STRENGTH_SHIFT;
+ val |= pad->strength << PMIC_GPIO_REG_OUT_STRENGTH_SHIFT;
ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_DIG_OUT_CTL, val);
if (ret < 0)
seq_puts(s, " ---");
} else {
- if (!pad->input_enabled) {
+ if (pad->input_enabled) {
ret = pmic_gpio_read(state, pad, PMIC_MPP_REG_RT_STS);
- if (!ret) {
- ret &= PMIC_MPP_REG_RT_STS_VAL_MASK;
- pad->out_value = ret;
- }
+ if (ret < 0)
+ return;
+
+ ret &= PMIC_MPP_REG_RT_STS_VAL_MASK;
+ pad->out_value = ret;
}
seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in");
}
}
+ val = val << PMIC_MPP_REG_MODE_DIR_SHIFT;
val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT;
val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK;
if (pad->input_enabled) {
ret = pmic_mpp_read(state, pad, PMIC_MPP_REG_RT_STS);
- if (!ret) {
- ret &= PMIC_MPP_REG_RT_STS_VAL_MASK;
- pad->out_value = ret;
- }
+ if (ret < 0)
+ return;
+
+ ret &= PMIC_MPP_REG_RT_STS_VAL_MASK;
+ pad->out_value = ret;
}
seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in");
* report all radios as hardware-blocked.
*/
static const struct dmi_system_id no_hw_rfkill_list[] = {
+ {
+ .ident = "Lenovo G40-30",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo G40-30"),
+ },
+ },
{
.ident = "Lenovo Yoga 2 11 / 13 / Pro",
.matches = {
return 0;
}
-void static hotkey_mask_warn_incomplete_mask(void)
+static void hotkey_mask_warn_incomplete_mask(void)
{
/* log only what the user can fix... */
const u32 wantedmask = hotkey_driver_mask &
This driver can also be built as a module. If so, the module
will be called rtc-ab-b5ze-s3.
+config RTC_DRV_ABX80X
+ tristate "Abracon ABx80x"
+ help
+ If you say yes here you get support for Abracon AB080X and AB180X
+ families of ultra-low-power battery- and capacitor-backed real-time
+ clock chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-abx80x.
+
config RTC_DRV_AS3722
tristate "ams AS3722 RTC driver"
depends on MFD_AS3722
obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o
obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o
obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o
+obj-$(CONFIG_RTC_DRV_ABX80X) += rtc-abx80x.o
obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o
obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o
obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
--- /dev/null
+/*
+ * A driver for the I2C members of the Abracon AB x8xx RTC family,
+ * and compatible: AB 1805 and AB 0805
+ *
+ * Copyright 2014-2015 Macq S.A.
+ *
+ * Author: Philippe De Muyter <phdm@macqel.be>
+ * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bcd.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/rtc.h>
+
+#define ABX8XX_REG_HTH 0x00
+#define ABX8XX_REG_SC 0x01
+#define ABX8XX_REG_MN 0x02
+#define ABX8XX_REG_HR 0x03
+#define ABX8XX_REG_DA 0x04
+#define ABX8XX_REG_MO 0x05
+#define ABX8XX_REG_YR 0x06
+#define ABX8XX_REG_WD 0x07
+
+#define ABX8XX_REG_CTRL1 0x10
+#define ABX8XX_CTRL_WRITE BIT(1)
+#define ABX8XX_CTRL_12_24 BIT(6)
+
+#define ABX8XX_REG_CFG_KEY 0x1f
+#define ABX8XX_CFG_KEY_MISC 0x9d
+
+#define ABX8XX_REG_ID0 0x28
+
+#define ABX8XX_REG_TRICKLE 0x20
+#define ABX8XX_TRICKLE_CHARGE_ENABLE 0xa0
+#define ABX8XX_TRICKLE_STANDARD_DIODE 0x8
+#define ABX8XX_TRICKLE_SCHOTTKY_DIODE 0x4
+
+static u8 trickle_resistors[] = {0, 3, 6, 11};
+
+enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
+ AB1801, AB1803, AB1804, AB1805, ABX80X};
+
+struct abx80x_cap {
+ u16 pn;
+ bool has_tc;
+};
+
+static struct abx80x_cap abx80x_caps[] = {
+ [AB0801] = {.pn = 0x0801},
+ [AB0803] = {.pn = 0x0803},
+ [AB0804] = {.pn = 0x0804, .has_tc = true},
+ [AB0805] = {.pn = 0x0805, .has_tc = true},
+ [AB1801] = {.pn = 0x1801},
+ [AB1803] = {.pn = 0x1803},
+ [AB1804] = {.pn = 0x1804, .has_tc = true},
+ [AB1805] = {.pn = 0x1805, .has_tc = true},
+ [ABX80X] = {.pn = 0}
+};
+
+static struct i2c_driver abx80x_driver;
+
+static int abx80x_enable_trickle_charger(struct i2c_client *client,
+ u8 trickle_cfg)
+{
+ int err;
+
+ /*
+ * Write the configuration key register to enable access to the Trickle
+ * register
+ */
+ err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
+ ABX8XX_CFG_KEY_MISC);
+ if (err < 0) {
+ dev_err(&client->dev, "Unable to write configuration key\n");
+ return -EIO;
+ }
+
+ err = i2c_smbus_write_byte_data(client, ABX8XX_REG_TRICKLE,
+ ABX8XX_TRICKLE_CHARGE_ENABLE |
+ trickle_cfg);
+ if (err < 0) {
+ dev_err(&client->dev, "Unable to write trickle register\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ unsigned char buf[8];
+ int err;
+
+ err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH,
+ sizeof(buf), buf);
+ if (err < 0) {
+ dev_err(&client->dev, "Unable to read date\n");
+ return -EIO;
+ }
+
+ tm->tm_sec = bcd2bin(buf[ABX8XX_REG_SC] & 0x7F);
+ tm->tm_min = bcd2bin(buf[ABX8XX_REG_MN] & 0x7F);
+ tm->tm_hour = bcd2bin(buf[ABX8XX_REG_HR] & 0x3F);
+ tm->tm_wday = buf[ABX8XX_REG_WD] & 0x7;
+ tm->tm_mday = bcd2bin(buf[ABX8XX_REG_DA] & 0x3F);
+ tm->tm_mon = bcd2bin(buf[ABX8XX_REG_MO] & 0x1F) - 1;
+ tm->tm_year = bcd2bin(buf[ABX8XX_REG_YR]) + 100;
+
+ err = rtc_valid_tm(tm);
+ if (err < 0)
+ dev_err(&client->dev, "retrieved date/time is not valid.\n");
+
+ return err;
+}
+
+static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ unsigned char buf[8];
+ int err;
+
+ if (tm->tm_year < 100)
+ return -EINVAL;
+
+ buf[ABX8XX_REG_HTH] = 0;
+ buf[ABX8XX_REG_SC] = bin2bcd(tm->tm_sec);
+ buf[ABX8XX_REG_MN] = bin2bcd(tm->tm_min);
+ buf[ABX8XX_REG_HR] = bin2bcd(tm->tm_hour);
+ buf[ABX8XX_REG_DA] = bin2bcd(tm->tm_mday);
+ buf[ABX8XX_REG_MO] = bin2bcd(tm->tm_mon + 1);
+ buf[ABX8XX_REG_YR] = bin2bcd(tm->tm_year - 100);
+ buf[ABX8XX_REG_WD] = tm->tm_wday;
+
+ err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_HTH,
+ sizeof(buf), buf);
+ if (err < 0) {
+ dev_err(&client->dev, "Unable to write to date registers\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static const struct rtc_class_ops abx80x_rtc_ops = {
+ .read_time = abx80x_rtc_read_time,
+ .set_time = abx80x_rtc_set_time,
+};
+
+static int abx80x_dt_trickle_cfg(struct device_node *np)
+{
+ const char *diode;
+ int trickle_cfg = 0;
+ int i, ret;
+ u32 tmp;
+
+ ret = of_property_read_string(np, "abracon,tc-diode", &diode);
+ if (ret)
+ return ret;
+
+ if (!strcmp(diode, "standard"))
+ trickle_cfg |= ABX8XX_TRICKLE_STANDARD_DIODE;
+ else if (!strcmp(diode, "schottky"))
+ trickle_cfg |= ABX8XX_TRICKLE_SCHOTTKY_DIODE;
+ else
+ return -EINVAL;
+
+ ret = of_property_read_u32(np, "abracon,tc-resistor", &tmp);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < sizeof(trickle_resistors); i++)
+ if (trickle_resistors[i] == tmp)
+ break;
+
+ if (i == sizeof(trickle_resistors))
+ return -EINVAL;
+
+ return (trickle_cfg | i);
+}
+
+static int abx80x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device_node *np = client->dev.of_node;
+ struct rtc_device *rtc;
+ int i, data, err, trickle_cfg = -EINVAL;
+ char buf[7];
+ unsigned int part = id->driver_data;
+ unsigned int partnumber;
+ unsigned int majrev, minrev;
+ unsigned int lot;
+ unsigned int wafer;
+ unsigned int uid;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -ENODEV;
+
+ err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ID0,
+ sizeof(buf), buf);
+ if (err < 0) {
+ dev_err(&client->dev, "Unable to read partnumber\n");
+ return -EIO;
+ }
+
+ partnumber = (buf[0] << 8) | buf[1];
+ majrev = buf[2] >> 3;
+ minrev = buf[2] & 0x7;
+ lot = ((buf[4] & 0x80) << 2) | ((buf[6] & 0x80) << 1) | buf[3];
+ uid = ((buf[4] & 0x7f) << 8) | buf[5];
+ wafer = (buf[6] & 0x7c) >> 2;
+ dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n",
+ partnumber, majrev, minrev, lot, wafer, uid);
+
+ data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL1);
+ if (data < 0) {
+ dev_err(&client->dev, "Unable to read control register\n");
+ return -EIO;
+ }
+
+ err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL1,
+ ((data & ~ABX8XX_CTRL_12_24) |
+ ABX8XX_CTRL_WRITE));
+ if (err < 0) {
+ dev_err(&client->dev, "Unable to write control register\n");
+ return -EIO;
+ }
+
+ /* part autodetection */
+ if (part == ABX80X) {
+ for (i = 0; abx80x_caps[i].pn; i++)
+ if (partnumber == abx80x_caps[i].pn)
+ break;
+ if (abx80x_caps[i].pn == 0) {
+ dev_err(&client->dev, "Unknown part: %04x\n",
+ partnumber);
+ return -EINVAL;
+ }
+ part = i;
+ }
+
+ if (partnumber != abx80x_caps[part].pn) {
+ dev_err(&client->dev, "partnumber mismatch %04x != %04x\n",
+ partnumber, abx80x_caps[part].pn);
+ return -EINVAL;
+ }
+
+ if (np && abx80x_caps[part].has_tc)
+ trickle_cfg = abx80x_dt_trickle_cfg(np);
+
+ if (trickle_cfg > 0) {
+ dev_info(&client->dev, "Enabling trickle charger: %02x\n",
+ trickle_cfg);
+ abx80x_enable_trickle_charger(client, trickle_cfg);
+ }
+
+ rtc = devm_rtc_device_register(&client->dev, abx80x_driver.driver.name,
+ &abx80x_rtc_ops, THIS_MODULE);
+
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
+
+ i2c_set_clientdata(client, rtc);
+
+ return 0;
+}
+
+static int abx80x_remove(struct i2c_client *client)
+{
+ return 0;
+}
+
+static const struct i2c_device_id abx80x_id[] = {
+ { "abx80x", ABX80X },
+ { "ab0801", AB0801 },
+ { "ab0803", AB0803 },
+ { "ab0804", AB0804 },
+ { "ab0805", AB0805 },
+ { "ab1801", AB1801 },
+ { "ab1803", AB1803 },
+ { "ab1804", AB1804 },
+ { "ab1805", AB1805 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, abx80x_id);
+
+static struct i2c_driver abx80x_driver = {
+ .driver = {
+ .name = "rtc-abx80x",
+ },
+ .probe = abx80x_probe,
+ .remove = abx80x_remove,
+ .id_table = abx80x_id,
+};
+
+module_i2c_driver(abx80x_driver);
+
+MODULE_AUTHOR("Philippe De Muyter <phdm@macqel.be>");
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_DESCRIPTION("Abracon ABX80X RTC driver");
+MODULE_LICENSE("GPL v2");
void __iomem *regs;
void __iomem *regs_soc;
spinlock_t lock;
+ /*
+ * While setting the time, the RTC TIME register should not be
+ * accessed. Setting the RTC time involves sleeping during
+ * 100ms, so a mutex instead of a spinlock is used to protect
+ * it
+ */
+ struct mutex mutex_time;
int irq;
};
struct armada38x_rtc *rtc = dev_get_drvdata(dev);
unsigned long time, time_check, flags;
- spin_lock_irqsave(&rtc->lock, flags);
-
+ mutex_lock(&rtc->mutex_time);
time = readl(rtc->regs + RTC_TIME);
/*
* WA for failing time set attempts. As stated in HW ERRATA if
if ((time_check - time) > 1)
time_check = readl(rtc->regs + RTC_TIME);
- spin_unlock_irqrestore(&rtc->lock, flags);
+ mutex_unlock(&rtc->mutex_time);
rtc_time_to_tm(time_check, tm);
* then wait for 100ms before writing to the time register to be
* sure that the data will be taken into account.
*/
- spin_lock_irqsave(&rtc->lock, flags);
-
+ mutex_lock(&rtc->mutex_time);
rtc_delayed_write(0, rtc, RTC_STATUS);
-
- spin_unlock_irqrestore(&rtc->lock, flags);
-
msleep(100);
-
- spin_lock_irqsave(&rtc->lock, flags);
-
rtc_delayed_write(time, rtc, RTC_TIME);
+ mutex_unlock(&rtc->mutex_time);
- spin_unlock_irqrestore(&rtc->lock, flags);
out:
return ret;
}
return -ENOMEM;
spin_lock_init(&rtc->lock);
+ mutex_init(&rtc->mutex_time);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc");
rtc->regs = devm_ioremap_resource(&pdev->dev, res);
info->buffer = kzalloc(RAW3215_BUFFER_SIZE, GFP_KERNEL | GFP_DMA);
info->inbuf = kzalloc(RAW3215_INBUF_SIZE, GFP_KERNEL | GFP_DMA);
if (!info->buffer || !info->inbuf) {
+ kfree(info->inbuf);
+ kfree(info->buffer);
kfree(info);
return NULL;
}
static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry *sglistarg);
static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int request_id);
static char *twa_string_lookup(twa_message_type *table, unsigned int aen_code);
-static void twa_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id);
/* Functions */
}
/* Now complete the io */
+ scsi_dma_unmap(cmd);
+ cmd->scsi_done(cmd);
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
tw_dev->posted_request_count--;
- tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
- twa_unmap_scsi_data(tw_dev, request_id);
}
/* Check for valid status after each drain */
}
} /* End twa_load_sgl() */
-/* This function will perform a pci-dma mapping for a scatter gather list */
-static int twa_map_scsi_sg_data(TW_Device_Extension *tw_dev, int request_id)
-{
- int use_sg;
- struct scsi_cmnd *cmd = tw_dev->srb[request_id];
-
- use_sg = scsi_dma_map(cmd);
- if (!use_sg)
- return 0;
- else if (use_sg < 0) {
- TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to map scatter gather list");
- return 0;
- }
-
- cmd->SCp.phase = TW_PHASE_SGLIST;
- cmd->SCp.have_data_in = use_sg;
-
- return use_sg;
-} /* End twa_map_scsi_sg_data() */
-
/* This function will poll for a response interrupt of a request */
static int twa_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds)
{
(tw_dev->state[i] != TW_S_INITIAL) &&
(tw_dev->state[i] != TW_S_COMPLETED)) {
if (tw_dev->srb[i]) {
- tw_dev->srb[i]->result = (DID_RESET << 16);
- tw_dev->srb[i]->scsi_done(tw_dev->srb[i]);
- twa_unmap_scsi_data(tw_dev, i);
+ struct scsi_cmnd *cmd = tw_dev->srb[i];
+
+ cmd->result = (DID_RESET << 16);
+ scsi_dma_unmap(cmd);
+ cmd->scsi_done(cmd);
}
}
}
/* Save the scsi command for use by the ISR */
tw_dev->srb[request_id] = SCpnt;
- /* Initialize phase to zero */
- SCpnt->SCp.phase = TW_PHASE_INITIAL;
-
retval = twa_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL);
switch (retval) {
case SCSI_MLQUEUE_HOST_BUSY:
+ scsi_dma_unmap(SCpnt);
twa_free_request_id(tw_dev, request_id);
- twa_unmap_scsi_data(tw_dev, request_id);
break;
case 1:
- tw_dev->state[request_id] = TW_S_COMPLETED;
- twa_free_request_id(tw_dev, request_id);
- twa_unmap_scsi_data(tw_dev, request_id);
SCpnt->result = (DID_ERROR << 16);
+ scsi_dma_unmap(SCpnt);
done(SCpnt);
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ twa_free_request_id(tw_dev, request_id);
retval = 0;
}
out:
command_packet->sg_list[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
command_packet->sg_list[0].length = cpu_to_le32(TW_MIN_SGL_LENGTH);
} else {
- sg_count = twa_map_scsi_sg_data(tw_dev, request_id);
- if (sg_count == 0)
+ sg_count = scsi_dma_map(srb);
+ if (sg_count < 0)
goto out;
scsi_for_each_sg(srb, sg, sg_count, i) {
return(table[index].text);
} /* End twa_string_lookup() */
-/* This function will perform a pci-dma unmap */
-static void twa_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id)
-{
- struct scsi_cmnd *cmd = tw_dev->srb[request_id];
-
- if (cmd->SCp.phase == TW_PHASE_SGLIST)
- scsi_dma_unmap(cmd);
-} /* End twa_unmap_scsi_data() */
-
/* This function gets called when a disk is coming on-line */
static int twa_slave_configure(struct scsi_device *sdev)
{
#define TW_CURRENT_DRIVER_BUILD 0
#define TW_CURRENT_DRIVER_BRANCH 0
-/* Phase defines */
-#define TW_PHASE_INITIAL 0
-#define TW_PHASE_SINGLE 1
-#define TW_PHASE_SGLIST 2
-
/* Misc defines */
#define TW_9550SX_DRAIN_COMPLETED 0xFFFF
#define TW_SECTOR_SIZE 512
return 0;
} /* End twl_post_command_packet() */
-/* This function will perform a pci-dma mapping for a scatter gather list */
-static int twl_map_scsi_sg_data(TW_Device_Extension *tw_dev, int request_id)
-{
- int use_sg;
- struct scsi_cmnd *cmd = tw_dev->srb[request_id];
-
- use_sg = scsi_dma_map(cmd);
- if (!use_sg)
- return 0;
- else if (use_sg < 0) {
- TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1, "Failed to map scatter gather list");
- return 0;
- }
-
- cmd->SCp.phase = TW_PHASE_SGLIST;
- cmd->SCp.have_data_in = use_sg;
-
- return use_sg;
-} /* End twl_map_scsi_sg_data() */
-
/* This function hands scsi cdb's to the firmware */
static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry_ISO *sglistarg)
{
if (!sglistarg) {
/* Map sglist from scsi layer to cmd packet */
if (scsi_sg_count(srb)) {
- sg_count = twl_map_scsi_sg_data(tw_dev, request_id);
- if (sg_count == 0)
+ sg_count = scsi_dma_map(srb);
+ if (sg_count <= 0)
goto out;
scsi_for_each_sg(srb, sg, sg_count, i) {
return retval;
} /* End twl_initialize_device_extension() */
-/* This function will perform a pci-dma unmap */
-static void twl_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id)
-{
- struct scsi_cmnd *cmd = tw_dev->srb[request_id];
-
- if (cmd->SCp.phase == TW_PHASE_SGLIST)
- scsi_dma_unmap(cmd);
-} /* End twl_unmap_scsi_data() */
-
/* This function will handle attention interrupts */
static int twl_handle_attention_interrupt(TW_Device_Extension *tw_dev)
{
}
/* Now complete the io */
+ scsi_dma_unmap(cmd);
+ cmd->scsi_done(cmd);
tw_dev->state[request_id] = TW_S_COMPLETED;
twl_free_request_id(tw_dev, request_id);
tw_dev->posted_request_count--;
- tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
- twl_unmap_scsi_data(tw_dev, request_id);
}
/* Check for another response interrupt */
if ((tw_dev->state[i] != TW_S_FINISHED) &&
(tw_dev->state[i] != TW_S_INITIAL) &&
(tw_dev->state[i] != TW_S_COMPLETED)) {
- if (tw_dev->srb[i]) {
- tw_dev->srb[i]->result = (DID_RESET << 16);
- tw_dev->srb[i]->scsi_done(tw_dev->srb[i]);
- twl_unmap_scsi_data(tw_dev, i);
+ struct scsi_cmnd *cmd = tw_dev->srb[i];
+
+ if (cmd) {
+ cmd->result = (DID_RESET << 16);
+ scsi_dma_unmap(cmd);
+ cmd->scsi_done(cmd);
}
}
}
/* Save the scsi command for use by the ISR */
tw_dev->srb[request_id] = SCpnt;
- /* Initialize phase to zero */
- SCpnt->SCp.phase = TW_PHASE_INITIAL;
-
retval = twl_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL);
if (retval) {
tw_dev->state[request_id] = TW_S_COMPLETED;
#define TW_CURRENT_DRIVER_BUILD 0
#define TW_CURRENT_DRIVER_BRANCH 0
-/* Phase defines */
-#define TW_PHASE_INITIAL 0
-#define TW_PHASE_SGLIST 2
-
/* Misc defines */
#define TW_SECTOR_SIZE 512
#define TW_MAX_UNITS 32
return 0;
} /* End tw_initialize_device_extension() */
-static int tw_map_scsi_sg_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
-{
- int use_sg;
-
- dprintk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data()\n");
-
- use_sg = scsi_dma_map(cmd);
- if (use_sg < 0) {
- printk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data(): pci_map_sg() failed.\n");
- return 0;
- }
-
- cmd->SCp.phase = TW_PHASE_SGLIST;
- cmd->SCp.have_data_in = use_sg;
-
- return use_sg;
-} /* End tw_map_scsi_sg_data() */
-
-static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
-{
- dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n");
-
- if (cmd->SCp.phase == TW_PHASE_SGLIST)
- scsi_dma_unmap(cmd);
-} /* End tw_unmap_scsi_data() */
-
/* This function will reset a device extension */
static int tw_reset_device_extension(TW_Device_Extension *tw_dev)
{
srb = tw_dev->srb[i];
if (srb != NULL) {
srb->result = (DID_RESET << 16);
- tw_dev->srb[i]->scsi_done(tw_dev->srb[i]);
- tw_unmap_scsi_data(tw_dev->tw_pci_dev, tw_dev->srb[i]);
+ scsi_dma_unmap(srb);
+ srb->scsi_done(srb);
}
}
}
command_packet->byte8.io.lba = lba;
command_packet->byte6.block_count = num_sectors;
- use_sg = tw_map_scsi_sg_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]);
- if (!use_sg)
+ use_sg = scsi_dma_map(srb);
+ if (use_sg <= 0)
return 1;
scsi_for_each_sg(tw_dev->srb[request_id], sg, use_sg, i) {
/* Save the scsi command for use by the ISR */
tw_dev->srb[request_id] = SCpnt;
- /* Initialize phase to zero */
- SCpnt->SCp.phase = TW_PHASE_INITIAL;
-
switch (*command) {
case READ_10:
case READ_6:
/* Now complete the io */
if ((error != TW_ISR_DONT_COMPLETE)) {
+ scsi_dma_unmap(tw_dev->srb[request_id]);
+ tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
tw_dev->state[request_id] = TW_S_COMPLETED;
tw_state_request_finish(tw_dev, request_id);
tw_dev->posted_request_count--;
- tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
-
- tw_unmap_scsi_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]);
}
}
#define TW_AEN_SMART_FAIL 0x000F
#define TW_AEN_SBUF_FAIL 0x0024
-/* Phase defines */
-#define TW_PHASE_INITIAL 0
-#define TW_PHASE_SINGLE 1
-#define TW_PHASE_SGLIST 2
-
/* Misc defines */
#define TW_ALIGNMENT_6000 64 /* 64 bytes */
#define TW_ALIGNMENT_7000 4 /* 4 bytes */
u8 lun = cmd->device->lun;
unsigned long flags;
int bufflen = scsi_bufflen(cmd);
- int mbo;
+ int mbo, sg_count;
struct mailbox *mb = aha1542->mb;
struct ccb *ccb = aha1542->ccb;
+ struct chain *cptr;
if (*cmd->cmnd == REQUEST_SENSE) {
/* Don't do the command - we have the sense data already */
print_hex_dump_bytes("command: ", DUMP_PREFIX_NONE, cmd->cmnd, cmd->cmd_len);
}
#endif
+ if (bufflen) { /* allocate memory before taking host_lock */
+ sg_count = scsi_sg_count(cmd);
+ cptr = kmalloc(sizeof(*cptr) * sg_count, GFP_KERNEL | GFP_DMA);
+ if (!cptr)
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
/* Use the outgoing mailboxes in a round-robin fashion, because this
is how the host adapter will scan for them */
if (bufflen) {
struct scatterlist *sg;
- struct chain *cptr;
- int i, sg_count = scsi_sg_count(cmd);
+ int i;
ccb[mbo].op = 2; /* SCSI Initiator Command w/scatter-gather */
- cmd->host_scribble = kmalloc(sizeof(*cptr)*sg_count,
- GFP_KERNEL | GFP_DMA);
- cptr = (struct chain *) cmd->host_scribble;
- if (cptr == NULL) {
- /* free the claimed mailbox slot */
- aha1542->int_cmds[mbo] = NULL;
- spin_unlock_irqrestore(sh->host_lock, flags);
- return SCSI_MLQUEUE_HOST_BUSY;
- }
+ cmd->host_scribble = (void *)cptr;
scsi_for_each_sg(cmd, sg, sg_count, i) {
any2scsi(cptr[i].dataptr, isa_page_to_bus(sg_page(sg))
+ sg->offset);
{"PIONEER", "CD-ROM DRM-624X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
{"Promise", "VTrak E610f", NULL, BLIST_SPARSELUN | BLIST_NO_RSOC},
{"Promise", "", NULL, BLIST_SPARSELUN},
+ {"QNAP", "iSCSI Storage", NULL, BLIST_MAX_1024},
{"QUANTUM", "XP34301", "1071", BLIST_NOTQ},
{"REGAL", "CDC-4X", NULL, BLIST_MAX5LUN | BLIST_SINGLELUN},
{"SanDisk", "ImageMate CF-SD1", NULL, BLIST_FORCELUN},
*/
if (*bflags & BLIST_MAX_512)
blk_queue_max_hw_sectors(sdev->request_queue, 512);
+ /*
+ * Max 1024 sector transfer length for targets that report incorrect
+ * max/optimal lengths and relied on the old block layer safe default
+ */
+ else if (*bflags & BLIST_MAX_1024)
+ blk_queue_max_hw_sectors(sdev->request_queue, 1024);
/*
* Some devices may not want to have a start command automatically
if (IS_ENABLED(CONFIG_ARCH_SHMOBILE_MULTI)) {
if (!of_machine_is_compatible("renesas,emev2") &&
!of_machine_is_compatible("renesas,r7s72100") &&
- !of_machine_is_compatible("renesas,r8a73a4") &&
#ifndef CONFIG_PM_GENERIC_DOMAINS_OF
+ !of_machine_is_compatible("renesas,r8a73a4") &&
!of_machine_is_compatible("renesas,r8a7740") &&
+ !of_machine_is_compatible("renesas,sh73a0") &&
#endif
!of_machine_is_compatible("renesas,r8a7778") &&
!of_machine_is_compatible("renesas,r8a7779") &&
!of_machine_is_compatible("renesas,r8a7791") &&
!of_machine_is_compatible("renesas,r8a7792") &&
!of_machine_is_compatible("renesas,r8a7793") &&
- !of_machine_is_compatible("renesas,r8a7794") &&
- !of_machine_is_compatible("renesas,sh7372") &&
- !of_machine_is_compatible("renesas,sh73a0"))
+ !of_machine_is_compatible("renesas,r8a7794"))
return 0;
}
bool "OMAP 4 Camera support"
depends on VIDEO_V4L2=y && VIDEO_V4L2_SUBDEV_API && I2C=y && ARCH_OMAP4
depends on HAS_DMA
+ select MFD_SYSCON
select VIDEOBUF2_DMA_CONTIG
---help---
Driver for an OMAP 4 ISS controller.
#include <linux/dma-mapping.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
platform_set_drvdata(pdev, iss);
+ /*
+ * TODO: When implementing DT support switch to syscon regmap lookup by
+ * phandle.
+ */
+ iss->syscon = syscon_regmap_lookup_by_compatible("syscon");
+ if (IS_ERR(iss->syscon)) {
+ ret = PTR_ERR(iss->syscon);
+ goto error;
+ }
+
/* Clocks */
ret = iss_map_mem_resource(pdev, iss, OMAP4_ISS_MEM_TOP);
if (ret < 0)
#include "iss_ipipe.h"
#include "iss_resizer.h"
+struct regmap;
+
#define to_iss_device(ptr_module) \
container_of(ptr_module, struct iss_device, ptr_module)
#define to_device(ptr_module) \
/*
* struct iss_device - ISS device structure.
+ * @syscon: Regmap for the syscon register space
* @crashed: Bitmask of crashed entities (indexed by entity ID)
*/
struct iss_device {
struct resource *res[OMAP4_ISS_MEM_LAST];
void __iomem *regs[OMAP4_ISS_MEM_LAST];
+ struct regmap *syscon;
u64 raw_dmamask;
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/regmap.h>
#include "../../../../arch/arm/mach-omap2/control.h"
* - bit [18] : CSIPHY1 CTRLCLK enable
* - bit [17:16] : CSIPHY1 config: 00 d-phy, 01/10 ccp2
*/
- cam_rx_ctrl = omap4_ctrl_pad_readl(
- OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX);
-
+ /*
+ * TODO: When implementing DT support specify the CONTROL_CAMERA_RX
+ * register offset in the syscon property instead of hardcoding it.
+ */
+ regmap_read(iss->syscon, 0x68, &cam_rx_ctrl);
if (subdevs->interface == ISS_INTERFACE_CSI2A_PHY1) {
cam_rx_ctrl &= ~(OMAP4_CAMERARX_CSI21_LANEENABLE_MASK |
cam_rx_ctrl |= OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK;
}
- omap4_ctrl_pad_writel(cam_rx_ctrl,
- OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX);
+ regmap_write(iss->syscon, 0x68, cam_rx_ctrl);
/* Reset used lane count */
csi2->phy->used_data_lanes = 0;
return 0;
}
+static void xen_console_update_evtchn(struct xencons_info *info)
+{
+ if (xen_hvm_domain()) {
+ uint64_t v;
+ int err;
+
+ err = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v);
+ if (!err && v)
+ info->evtchn = v;
+ } else
+ info->evtchn = xen_start_info->console.domU.evtchn;
+}
+
void xen_console_resume(void)
{
struct xencons_info *info = vtermno_to_xencons(HVC_COOKIE);
- if (info != NULL && info->irq)
+ if (info != NULL && info->irq) {
+ if (!xen_initial_domain())
+ xen_console_update_evtchn(info);
rebind_evtchn_irq(info->evtchn, info->irq);
+ }
}
static void xencons_disconnect_backend(struct xencons_info *info)
#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250
#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470
+#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
+
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
.subdevice = PCI_ANY_ID,
.setup = pci_xr17v35x_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17V8358,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17v35x_setup,
+ },
/*
* Xircom cards
*/
pbn_exar_XR17V352,
pbn_exar_XR17V354,
pbn_exar_XR17V358,
+ pbn_exar_XR17V8358,
pbn_exar_ibm_saturn,
pbn_pasemi_1682M,
pbn_ni8430_2,
.reg_shift = 0,
.first_offset = 0,
},
+ [pbn_exar_XR17V8358] = {
+ .flags = FL_BASE0,
+ .num_ports = 16,
+ .base_baud = 7812500,
+ .uart_offset = 0x400,
+ .reg_shift = 0,
+ .first_offset = 0,
+ },
[pbn_exar_ibm_saturn] = {
.flags = FL_BASE0,
.num_ports = 1,
0,
0, pbn_exar_XR17C158 },
/*
- * Exar Corp. XR17V35[248] Dual/Quad/Octal PCIe UARTs
+ * Exar Corp. XR17V[48]35[248] Dual/Quad/Octal/Hexa PCIe UARTs
*/
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V352,
PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17V358 },
-
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V8358,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17V8358 },
/*
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
*/
config.direction = DMA_MEM_TO_DEV;
config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
config.dst_addr = port->mapbase + ATMEL_US_THR;
+ config.dst_maxburst = 1;
ret = dmaengine_slave_config(atmel_port->chan_tx,
&config);
config.direction = DMA_DEV_TO_MEM;
config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
config.src_addr = port->mapbase + ATMEL_US_RHR;
+ config.src_maxburst = 1;
ret = dmaengine_slave_config(atmel_port->chan_rx,
&config);
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
#endif
- { .type = "serial", .data = (void *)PORT_UNKNOWN, },
{ /* end of list */ },
};
spin_lock_irqsave(&port->lock, flags);
ufcon = rd_regl(port, S3C2410_UFCON);
- ufcon |= S3C2410_UFCON_RESETRX | S3C2410_UFCON_RESETTX |
- S5PV210_UFCON_RXTRIG8;
+ ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
+ if (!uart_console(port))
+ ufcon |= S3C2410_UFCON_RESETTX;
wr_regl(port, S3C2410_UFCON, ufcon);
enable_rx_pio(ourport);
* @port: the port to write the message
* @s: array of characters
* @count: number of characters in string to write
- * @write: function to write character to port
+ * @putchar: function to write character to port
*/
void uart_console_write(struct uart_port *port, const char *s,
unsigned int count,
static int ulite_probe(struct platform_device *pdev)
{
- struct resource *res, *res2;
+ struct resource *res;
+ int irq;
int id = pdev->id;
#ifdef CONFIG_OF
const __be32 *prop;
if (!res)
return -ENODEV;
- res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res2)
- return -ENODEV;
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0)
+ return -ENXIO;
- return ulite_assign(&pdev->dev, id, res->start, res2->start);
+ return ulite_assign(&pdev->dev, id, res->start, irq);
}
static int ulite_remove(struct platform_device *pdev)
*/
static int cdns_uart_probe(struct platform_device *pdev)
{
- int rc, id;
+ int rc, id, irq;
struct uart_port *port;
- struct resource *res, *res2;
+ struct resource *res;
struct cdns_uart *cdns_uart_data;
cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
goto err_out_clk_disable;
}
- res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res2) {
- rc = -ENODEV;
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ rc = -ENXIO;
goto err_out_clk_disable;
}
* and triggers invocation of the config_port() entry point.
*/
port->mapbase = res->start;
- port->irq = res2->start;
+ port->irq = irq;
port->dev = &pdev->dev;
port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
port->private_data = cdns_uart_data;
* Locking: termios_rwsem
*/
-static int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
+int tty_set_termios(struct tty_struct *tty, struct ktermios *new_termios)
{
struct ktermios old_termios;
struct tty_ldisc *ld;
up_write(&tty->termios_rwsem);
return 0;
}
+EXPORT_SYMBOL_GPL(tty_set_termios);
/**
* set_termios - set termios values for a tty
{
struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm);
- mutex_unlock(&fsm->lock);
if (on) {
ci_role_stop(ci);
ci_role_start(ci, CI_ROLE_HOST);
hw_device_reset(ci);
ci_role_start(ci, CI_ROLE_GADGET);
}
- mutex_lock(&fsm->lock);
return 0;
}
{
struct ci_hdrc *ci = container_of(fsm, struct ci_hdrc, fsm);
- mutex_unlock(&fsm->lock);
if (on)
usb_gadget_vbus_connect(&ci->gadget);
else
usb_gadget_vbus_disconnect(&ci->gadget);
- mutex_lock(&fsm->lock);
return 0;
}
}
while (buflen > 0) {
+ elength = buffer[0];
+ if (!elength) {
+ dev_err(&intf->dev, "skipping garbage byte\n");
+ elength = 1;
+ goto next_desc;
+ }
if (buffer[1] != USB_DT_CS_INTERFACE) {
dev_err(&intf->dev, "skipping garbage\n");
goto next_desc;
}
- elength = buffer[0];
switch (buffer[2]) {
case USB_CDC_UNION_TYPE: /* we've found it */
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hcd->regs)) {
- ret = PTR_ERR(hcd->regs);
+ if (!res) {
+ dev_err(&pdev->dev, "Unable to get memory resource\n");
+ ret = -ENODEV;
goto put_hcd;
}
+
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
+ hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ ret = -ENOMEM;
+ goto put_hcd;
+ }
/*
* OTG driver takes care of PHY initialization, clock management,
}
static int uas_use_uas_driver(struct usb_interface *intf,
- const struct usb_device_id *id)
+ const struct usb_device_id *id,
+ unsigned long *flags_ret)
{
struct usb_host_endpoint *eps[4] = { };
struct usb_device *udev = interface_to_usbdev(intf);
* this writing the following versions exist:
* ASM1051 - no uas support version
* ASM1051 - with broken (*) uas support
- * ASM1053 - with working uas support
+ * ASM1053 - with working uas support, but problems with large xfers
* ASM1153 - with working uas support
*
* Devices with these chips re-use a number of device-ids over the
} else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) {
/* Possibly an ASM1051, disable uas */
flags |= US_FL_IGNORE_UAS;
+ } else {
+ /* ASM1053, these have issues with large transfers */
+ flags |= US_FL_MAX_SECTORS_240;
}
}
return 0;
}
+ if (flags_ret)
+ *flags_ret = flags;
+
return 1;
}
static int uas_slave_alloc(struct scsi_device *sdev)
{
- sdev->hostdata = (void *)sdev->host->hostdata;
+ struct uas_dev_info *devinfo =
+ (struct uas_dev_info *)sdev->host->hostdata;
+
+ sdev->hostdata = devinfo;
/* USB has unusual DMA-alignment requirements: Although the
* starting address of each scatter-gather element doesn't matter,
*/
blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+ if (devinfo->flags & US_FL_MAX_SECTORS_64)
+ blk_queue_max_hw_sectors(sdev->request_queue, 64);
+ else if (devinfo->flags & US_FL_MAX_SECTORS_240)
+ blk_queue_max_hw_sectors(sdev->request_queue, 240);
+
return 0;
}
struct Scsi_Host *shost = NULL;
struct uas_dev_info *devinfo;
struct usb_device *udev = interface_to_usbdev(intf);
+ unsigned long dev_flags;
- if (!uas_use_uas_driver(intf, id))
+ if (!uas_use_uas_driver(intf, id, &dev_flags))
return -ENODEV;
if (uas_switch_interface(udev, intf))
devinfo->udev = udev;
devinfo->resetting = 0;
devinfo->shutdown = 0;
- devinfo->flags = id->driver_info;
- usb_stor_adjust_quirks(udev, &devinfo->flags);
+ devinfo->flags = dev_flags;
init_usb_anchor(&devinfo->cmd_urbs);
init_usb_anchor(&devinfo->sense_urbs);
init_usb_anchor(&devinfo->data_urbs);
US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
- US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES);
+ US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
+ US_FL_MAX_SECTORS_240);
p = quirks;
while (*p) {
case 'f':
f |= US_FL_NO_REPORT_OPCODES;
break;
+ case 'g':
+ f |= US_FL_MAX_SECTORS_240;
+ break;
case 'h':
f |= US_FL_CAPACITY_HEURISTICS;
break;
/* If uas is enabled and this device can do uas then ignore it. */
#if IS_ENABLED(CONFIG_USB_UAS)
- if (uas_use_uas_driver(intf, id))
+ if (uas_use_uas_driver(intf, id, NULL))
return -ENXIO;
#endif
mutex_lock(&vdev->igate);
if (vdev->req_trigger) {
- dev_dbg(&vdev->pdev->dev, "Requesting device from user\n");
+ if (!(count % 10))
+ dev_notice_ratelimited(&vdev->pdev->dev,
+ "Relaying device request to user (#%u)\n",
+ count);
eventfd_signal(vdev->req_trigger, 1);
+ } else if (count == 0) {
+ dev_warn(&vdev->pdev->dev,
+ "No device request channel registered, blocked until released by user\n");
}
mutex_unlock(&vdev->igate);
void *device_data = device->device_data;
struct vfio_unbound_dev *unbound;
unsigned int i = 0;
+ long ret;
+ bool interrupted = false;
/*
* The group exists so long as we have a device reference. Get
vfio_device_put(device);
- } while (wait_event_interruptible_timeout(vfio.release_q,
- !vfio_dev_present(group, dev),
- HZ * 10) <= 0);
+ if (interrupted) {
+ ret = wait_event_timeout(vfio.release_q,
+ !vfio_dev_present(group, dev), HZ * 10);
+ } else {
+ ret = wait_event_interruptible_timeout(vfio.release_q,
+ !vfio_dev_present(group, dev), HZ * 10);
+ if (ret == -ERESTARTSYS) {
+ interrupted = true;
+ dev_warn(dev,
+ "Device is currently in use, task"
+ " \"%s\" (%d) "
+ "blocked until device is released",
+ current->comm, task_pid_nr(current));
+ }
+ }
+ } while (ret <= 0);
vfio_group_put(group);
return IRQ_HANDLED;
}
+static void evtchn_2l_resume(void)
+{
+ int i;
+
+ for_each_online_cpu(i)
+ memset(per_cpu(cpu_evtchn_mask, i), 0, sizeof(xen_ulong_t) *
+ EVTCHN_2L_NR_CHANNELS/BITS_PER_EVTCHN_WORD);
+}
+
static const struct evtchn_ops evtchn_ops_2l = {
.max_channels = evtchn_2l_max_channels,
.nr_channels = evtchn_2l_max_channels,
.mask = evtchn_2l_mask,
.unmask = evtchn_2l_unmask,
.handle_events = evtchn_2l_handle_events,
+ .resume = evtchn_2l_resume,
};
void __init xen_evtchn_2l_init(void)
if (rc)
goto err;
- bind_evtchn_to_cpu(evtchn, 0);
info->evtchn = evtchn;
+ bind_evtchn_to_cpu(evtchn, 0);
rc = xen_evtchn_port_setup(info);
if (rc)
mutex_unlock(&irq_mapping_update_lock);
- /* new event channels are always bound to cpu 0 */
- irq_set_affinity(irq, cpumask_of(0));
+ bind_evtchn_to_cpu(evtchn, info->cpu);
+ /* This will be deferred until interrupt is processed */
+ irq_set_affinity(irq, cpumask_of(info->cpu));
/* Unmask the event channel. */
enable_irq(irq);
return err;
}
-struct unmap_grant_pages_callback_data
-{
- struct completion completion;
- int result;
-};
-
-static void unmap_grant_callback(int result,
- struct gntab_unmap_queue_data *data)
-{
- struct unmap_grant_pages_callback_data* d = data->data;
-
- d->result = result;
- complete(&d->completion);
-}
-
static int __unmap_grant_pages(struct grant_map *map, int offset, int pages)
{
int i, err = 0;
struct gntab_unmap_queue_data unmap_data;
- struct unmap_grant_pages_callback_data data;
-
- init_completion(&data.completion);
- unmap_data.data = &data;
- unmap_data.done= &unmap_grant_callback;
if (map->notify.flags & UNMAP_NOTIFY_CLEAR_BYTE) {
int pgno = (map->notify.addr >> PAGE_SHIFT);
unmap_data.pages = map->pages + offset;
unmap_data.count = pages;
- gnttab_unmap_refs_async(&unmap_data);
-
- wait_for_completion(&data.completion);
- if (data.result)
- return data.result;
+ err = gnttab_unmap_refs_sync(&unmap_data);
+ if (err)
+ return err;
for (i = 0; i < pages; i++) {
if (map->unmap_ops[offset+i].status)
int (*query_foreign_access)(grant_ref_t ref);
};
+struct unmap_refs_callback_data {
+ struct completion completion;
+ int result;
+};
+
static struct gnttab_ops *gnttab_interface;
static int grant_table_version;
}
EXPORT_SYMBOL_GPL(gnttab_unmap_refs_async);
+static void unmap_refs_callback(int result,
+ struct gntab_unmap_queue_data *data)
+{
+ struct unmap_refs_callback_data *d = data->data;
+
+ d->result = result;
+ complete(&d->completion);
+}
+
+int gnttab_unmap_refs_sync(struct gntab_unmap_queue_data *item)
+{
+ struct unmap_refs_callback_data data;
+
+ init_completion(&data.completion);
+ item->data = &data;
+ item->done = &unmap_refs_callback;
+ gnttab_unmap_refs_async(item);
+ wait_for_completion(&data.completion);
+
+ return data.result;
+}
+EXPORT_SYMBOL_GPL(gnttab_unmap_refs_sync);
+
static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes)
{
int rc;
goto out_resume;
}
+ xen_arch_suspend();
+
si.cancelled = 1;
err = stop_machine(xen_suspend, &si, cpumask_of(0));
si.cancelled = 1;
}
+ xen_arch_resume();
+
out_resume:
- if (!si.cancelled) {
- xen_arch_resume();
+ if (!si.cancelled)
xs_resume();
- } else
+ else
xs_suspend_cancel();
dpm_resume_end(si.cancelled ? PMSG_THAW : PMSG_RESTORE);
#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
- xen_io_tlb_start = (void *)__get_free_pages(__GFP_NOWARN, order);
+ xen_io_tlb_start = (void *)xen_get_swiotlb_free_pages(order);
if (xen_io_tlb_start)
break;
order--;
#include "conf_space.h"
#include "conf_space_quirks.h"
-bool permissive;
-module_param(permissive, bool, 0644);
+bool xen_pcibk_permissive;
+module_param_named(permissive, xen_pcibk_permissive, bool, 0644);
/* This is where xen_pcibk_read_config_byte, xen_pcibk_read_config_word,
* xen_pcibk_write_config_word, and xen_pcibk_write_config_byte are created. */
* This means that some fields may still be read-only because
* they have entries in the config_field list that intercept
* the write and do nothing. */
- if (dev_data->permissive || permissive) {
+ if (dev_data->permissive || xen_pcibk_permissive) {
switch (size) {
case 1:
err = pci_write_config_byte(dev, offset,
void *data;
};
-extern bool permissive;
+extern bool xen_pcibk_permissive;
#define OFFSET(cfg_entry) ((cfg_entry)->base_offset+(cfg_entry)->field->offset)
cmd->val = value;
- if (!permissive && (!dev_data || !dev_data->permissive))
+ if (!xen_pcibk_permissive && (!dev_data || !dev_data->permissive))
return 0;
/* Only allow the guest to control certain bits. */
#include <xen/xen.h>
#include <xen/xenbus.h>
#include <xen/events.h>
+#include <xen/xen-ops.h>
#include <xen/page.h>
#include <xen/hvm.h>
return err;
}
+static int xenbus_resume_cb(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ int err = 0;
+
+ if (xen_hvm_domain()) {
+ uint64_t v;
+
+ err = hvm_get_parameter(HVM_PARAM_STORE_EVTCHN, &v);
+ if (!err && v)
+ xen_store_evtchn = v;
+ else
+ pr_warn("Cannot update xenstore event channel: %d\n",
+ err);
+ } else
+ xen_store_evtchn = xen_start_info->store_evtchn;
+
+ return err;
+}
+
+static struct notifier_block xenbus_resume_nb = {
+ .notifier_call = xenbus_resume_cb,
+};
+
static int __init xenbus_init(void)
{
int err = 0;
goto out_error;
}
+ if ((xen_store_domain_type != XS_LOCAL) &&
+ (xen_store_domain_type != XS_UNKNOWN))
+ xen_resume_notifier_register(&xenbus_resume_nb);
+
#ifdef CONFIG_XEN_COMPAT_XENFS
/*
* Create xenfs mountpoint in /proc for compatibility with
set_nlink(inode, btrfs_stack_inode_nlink(inode_item));
inode_set_bytes(inode, btrfs_stack_inode_nbytes(inode_item));
BTRFS_I(inode)->generation = btrfs_stack_inode_generation(inode_item);
+ BTRFS_I(inode)->last_trans = btrfs_stack_inode_transid(inode_item);
+
inode->i_version = btrfs_stack_inode_sequence(inode_item);
inode->i_rdev = 0;
*rdev = btrfs_stack_inode_rdev(inode_item);
bi = btrfs_item_ptr_offset(leaf, path->slots[0]);
write_extent_buffer(leaf, &cache->item, bi, sizeof(cache->item));
btrfs_mark_buffer_dirty(leaf);
- btrfs_release_path(path);
fail:
+ btrfs_release_path(path);
if (ret)
btrfs_abort_transaction(trans, root, ret);
return ret;
spin_lock(&block_group->lock);
if (block_group->cached != BTRFS_CACHE_FINISHED ||
- !btrfs_test_opt(root, SPACE_CACHE) ||
- block_group->delalloc_bytes) {
+ !btrfs_test_opt(root, SPACE_CACHE)) {
/*
* don't bother trying to write stuff out _if_
* a) we're not cached,
int loops = 0;
spin_lock(&cur_trans->dirty_bgs_lock);
- if (!list_empty(&cur_trans->dirty_bgs)) {
- list_splice_init(&cur_trans->dirty_bgs, &dirty);
+ if (list_empty(&cur_trans->dirty_bgs)) {
+ spin_unlock(&cur_trans->dirty_bgs_lock);
+ return 0;
}
+ list_splice_init(&cur_trans->dirty_bgs, &dirty);
spin_unlock(&cur_trans->dirty_bgs_lock);
again:
- if (list_empty(&dirty)) {
- btrfs_free_path(path);
- return 0;
- }
-
/*
* make sure all the block groups on our dirty list actually
* exist
return -ENOMEM;
}
+ /*
+ * cache_write_mutex is here only to save us from balance or automatic
+ * removal of empty block groups deleting this block group while we are
+ * writing out the cache
+ */
+ mutex_lock(&trans->transaction->cache_write_mutex);
while (!list_empty(&dirty)) {
cache = list_first_entry(&dirty,
struct btrfs_block_group_cache,
dirty_list);
-
- /*
- * cache_write_mutex is here only to save us from balance
- * deleting this block group while we are writing out the
- * cache
- */
- mutex_lock(&trans->transaction->cache_write_mutex);
-
/*
* this can happen if something re-dirties a block
* group that is already under IO. Just wait for it to
}
if (!ret)
ret = write_one_cache_group(trans, root, path, cache);
- mutex_unlock(&trans->transaction->cache_write_mutex);
/* if its not on the io list, we need to put the block group */
if (should_put)
if (ret)
break;
+
+ /*
+ * Avoid blocking other tasks for too long. It might even save
+ * us from writing caches for block groups that are going to be
+ * removed.
+ */
+ mutex_unlock(&trans->transaction->cache_write_mutex);
+ mutex_lock(&trans->transaction->cache_write_mutex);
}
+ mutex_unlock(&trans->transaction->cache_write_mutex);
/*
* go through delayed refs for all the stuff we've just kicked off
loops++;
spin_lock(&cur_trans->dirty_bgs_lock);
list_splice_init(&cur_trans->dirty_bgs, &dirty);
+ /*
+ * dirty_bgs_lock protects us from concurrent block group
+ * deletes too (not just cache_write_mutex).
+ */
+ if (!list_empty(&dirty)) {
+ spin_unlock(&cur_trans->dirty_bgs_lock);
+ goto again;
+ }
spin_unlock(&cur_trans->dirty_bgs_lock);
- goto again;
}
btrfs_free_path(path);
* returns the key for the extent through ins, and a tree buffer for
* the first block of the extent through buf.
*
- * returns the tree buffer or NULL.
+ * returns the tree buffer or an ERR_PTR on error.
*/
struct extent_buffer *btrfs_alloc_tree_block(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_key ins;
struct btrfs_block_rsv *block_rsv;
struct extent_buffer *buf;
+ struct btrfs_delayed_extent_op *extent_op;
u64 flags = 0;
int ret;
u32 blocksize = root->nodesize;
ret = btrfs_reserve_extent(root, blocksize, blocksize,
empty_size, hint, &ins, 0, 0);
- if (ret) {
- unuse_block_rsv(root->fs_info, block_rsv, blocksize);
- return ERR_PTR(ret);
- }
+ if (ret)
+ goto out_unuse;
buf = btrfs_init_new_buffer(trans, root, ins.objectid, level);
- BUG_ON(IS_ERR(buf)); /* -ENOMEM */
+ if (IS_ERR(buf)) {
+ ret = PTR_ERR(buf);
+ goto out_free_reserved;
+ }
if (root_objectid == BTRFS_TREE_RELOC_OBJECTID) {
if (parent == 0)
BUG_ON(parent > 0);
if (root_objectid != BTRFS_TREE_LOG_OBJECTID) {
- struct btrfs_delayed_extent_op *extent_op;
extent_op = btrfs_alloc_delayed_extent_op();
- BUG_ON(!extent_op); /* -ENOMEM */
+ if (!extent_op) {
+ ret = -ENOMEM;
+ goto out_free_buf;
+ }
if (key)
memcpy(&extent_op->key, key, sizeof(extent_op->key));
else
extent_op->level = level;
ret = btrfs_add_delayed_tree_ref(root->fs_info, trans,
- ins.objectid,
- ins.offset, parent, root_objectid,
- level, BTRFS_ADD_DELAYED_EXTENT,
- extent_op, 0);
- BUG_ON(ret); /* -ENOMEM */
+ ins.objectid, ins.offset,
+ parent, root_objectid, level,
+ BTRFS_ADD_DELAYED_EXTENT,
+ extent_op, 0);
+ if (ret)
+ goto out_free_delayed;
}
return buf;
+
+out_free_delayed:
+ btrfs_free_delayed_extent_op(extent_op);
+out_free_buf:
+ free_extent_buffer(buf);
+out_free_reserved:
+ btrfs_free_reserved_extent(root, ins.objectid, ins.offset, 0);
+out_unuse:
+ unuse_block_rsv(root->fs_info, block_rsv, blocksize);
+ return ERR_PTR(ret);
}
struct walk_control {
do {
index--;
page = eb->pages[index];
- if (page && mapped) {
+ if (!page)
+ continue;
+ if (mapped)
spin_lock(&page->mapping->private_lock);
+ /*
+ * We do this since we'll remove the pages after we've
+ * removed the eb from the radix tree, so we could race
+ * and have this page now attached to the new eb. So
+ * only clear page_private if it's still connected to
+ * this eb.
+ */
+ if (PagePrivate(page) &&
+ page->private == (unsigned long)eb) {
+ BUG_ON(test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags));
+ BUG_ON(PageDirty(page));
+ BUG_ON(PageWriteback(page));
/*
- * We do this since we'll remove the pages after we've
- * removed the eb from the radix tree, so we could race
- * and have this page now attached to the new eb. So
- * only clear page_private if it's still connected to
- * this eb.
+ * We need to make sure we haven't be attached
+ * to a new eb.
*/
- if (PagePrivate(page) &&
- page->private == (unsigned long)eb) {
- BUG_ON(test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags));
- BUG_ON(PageDirty(page));
- BUG_ON(PageWriteback(page));
- /*
- * We need to make sure we haven't be attached
- * to a new eb.
- */
- ClearPagePrivate(page);
- set_page_private(page, 0);
- /* One for the page private */
- page_cache_release(page);
- }
- spin_unlock(&page->mapping->private_lock);
-
- }
- if (page) {
- /* One for when we alloced the page */
+ ClearPagePrivate(page);
+ set_page_private(page, 0);
+ /* One for the page private */
page_cache_release(page);
}
+
+ if (mapped)
+ spin_unlock(&page->mapping->private_lock);
+
+ /* One for when we alloced the page */
+ page_cache_release(page);
} while (index != 0);
}
mark_extent_buffer_accessed(exists, p);
goto free_eb;
}
+ exists = NULL;
/*
* Do this so attach doesn't complain and we need to
return eb;
free_eb:
+ WARN_ON(!atomic_dec_and_test(&eb->refs));
for (i = 0; i < num_pages; i++) {
if (eb->pages[i])
unlock_page(eb->pages[i]);
}
- WARN_ON(!atomic_dec_and_test(&eb->refs));
btrfs_release_extent_buffer(eb);
return exists;
}
mapping_set_gfp_mask(inode->i_mapping,
mapping_gfp_mask(inode->i_mapping) &
- ~(GFP_NOFS & ~__GFP_HIGHMEM));
+ ~(__GFP_FS | __GFP_HIGHMEM));
return inode;
}
*
* This function writes out a free space cache struct to disk for quick recovery
* on mount. This will return 0 if it was successfull in writing the cache out,
- * and -1 if it was not.
+ * or an errno if it was not.
*/
static int __btrfs_write_out_cache(struct btrfs_root *root, struct inode *inode,
struct btrfs_free_space_ctl *ctl,
int must_iput = 0;
if (!i_size_read(inode))
- return -1;
+ return -EIO;
WARN_ON(io_ctl->pages);
ret = io_ctl_init(io_ctl, inode, root, 1);
if (ret)
- return -1;
+ return ret;
if (block_group && (block_group->flags & BTRFS_BLOCK_GROUP_DATA)) {
down_write(&block_group->data_rwsem);
}
/* Lock all pages first so we can lock the extent safely. */
- io_ctl_prepare_pages(io_ctl, inode, 0);
+ ret = io_ctl_prepare_pages(io_ctl, inode, 0);
+ if (ret)
+ goto out;
lock_extent_bits(&BTRFS_I(inode)->io_tree, 0, i_size_read(inode) - 1,
0, &cached_state);
BTRFS_I(inode)->generation = btrfs_inode_generation(leaf, inode_item);
BTRFS_I(inode)->last_trans = btrfs_inode_transid(leaf, inode_item);
+ inode->i_version = btrfs_inode_sequence(leaf, inode_item);
+ inode->i_generation = BTRFS_I(inode)->generation;
+ inode->i_rdev = 0;
+ rdev = btrfs_inode_rdev(leaf, inode_item);
+
+ BTRFS_I(inode)->index_cnt = (u64)-1;
+ BTRFS_I(inode)->flags = btrfs_inode_flags(leaf, inode_item);
+
+cache_index:
/*
* If we were modified in the current generation and evicted from memory
* and then re-read we need to do a full sync since we don't have any
* idea about which extents were modified before we were evicted from
* cache.
+ *
+ * This is required for both inode re-read from disk and delayed inode
+ * in delayed_nodes_tree.
*/
if (BTRFS_I(inode)->last_trans == root->fs_info->generation)
set_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
&BTRFS_I(inode)->runtime_flags);
- inode->i_version = btrfs_inode_sequence(leaf, inode_item);
- inode->i_generation = BTRFS_I(inode)->generation;
- inode->i_rdev = 0;
- rdev = btrfs_inode_rdev(leaf, inode_item);
-
- BTRFS_I(inode)->index_cnt = (u64)-1;
- BTRFS_I(inode)->flags = btrfs_inode_flags(leaf, inode_item);
-
-cache_index:
path->slots[0]++;
if (inode->i_nlink != 1 ||
path->slots[0] >= btrfs_header_nritems(leaf))
"Attempt to delete subvolume %llu during send",
dest->root_key.objectid);
err = -EPERM;
- goto out_dput;
+ goto out_unlock_inode;
}
d_invalidate(dentry);
root_flags & ~BTRFS_ROOT_SUBVOL_DEAD);
spin_unlock(&dest->root_item_lock);
}
+out_unlock_inode:
mutex_unlock(&inode->i_mutex);
if (!err) {
shrink_dcache_sb(root->fs_info->sb);
struct extent_map *em;
struct list_head *search_list = &trans->transaction->pending_chunks;
int ret = 0;
+ u64 physical_start = *start;
again:
list_for_each_entry(em, search_list, list) {
for (i = 0; i < map->num_stripes; i++) {
if (map->stripes[i].dev != device)
continue;
- if (map->stripes[i].physical >= *start + len ||
+ if (map->stripes[i].physical >= physical_start + len ||
map->stripes[i].physical + em->orig_block_len <=
- *start)
+ physical_start)
continue;
*start = map->stripes[i].physical +
em->orig_block_len;
*/
if (contains_pending_extent(trans, device,
&search_start,
- hole_size))
- hole_size = 0;
+ hole_size)) {
+ if (key.offset >= search_start) {
+ hole_size = key.offset - search_start;
+ } else {
+ WARN_ON_ONCE(1);
+ hole_size = 0;
+ }
+ }
if (hole_size > max_hole_size) {
max_hole_start = search_start;
MODULE_VERSION("0.0.2");
MODULE_DESCRIPTION("Simple RAM filesystem for user driven kernel subsystem configuration.");
-module_init(configfs_init);
+core_initcall(configfs_init);
module_exit(configfs_exit);
int len, i;
int err = -ENOMEM;
- entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+ entry = kzalloc(sizeof(*entry), GFP_KERNEL);
if (!entry)
return err;
If you are not using a security module that requires using
extended attributes for file security labels, say N.
-config EXT4_FS_ENCRYPTION
- bool "Ext4 Encryption"
+config EXT4_ENCRYPTION
+ tristate "Ext4 Encryption"
depends on EXT4_FS
select CRYPTO_AES
select CRYPTO_CBC
efficient since it avoids caching the encrypted and
decrypted pages in the page cache.
+config EXT4_FS_ENCRYPTION
+ bool
+ default y
+ depends on EXT4_ENCRYPTION
+
config EXT4_DEBUG
bool "EXT4 debugging support"
depends on EXT4_FS
int res = 0;
char iv[EXT4_CRYPTO_BLOCK_SIZE];
struct scatterlist sg[1];
+ int padding = 4 << (ctx->flags & EXT4_POLICY_FLAGS_PAD_MASK);
char *workbuf;
if (iname->len <= 0 || iname->len > ctx->lim)
ciphertext_len = (iname->len < EXT4_CRYPTO_BLOCK_SIZE) ?
EXT4_CRYPTO_BLOCK_SIZE : iname->len;
+ ciphertext_len = ext4_fname_crypto_round_up(ciphertext_len, padding);
ciphertext_len = (ciphertext_len > ctx->lim)
? ctx->lim : ciphertext_len;
/* Create encryption request */
sg_init_table(sg, 1);
sg_set_page(sg, ctx->workpage, PAGE_SIZE, 0);
- ablkcipher_request_set_crypt(req, sg, sg, iname->len, iv);
+ ablkcipher_request_set_crypt(req, sg, sg, ciphertext_len, iv);
res = crypto_ablkcipher_encrypt(req);
if (res == -EINPROGRESS || res == -EBUSY) {
BUG_ON(req->base.data != &ecr);
return oname->len;
}
+static const char *lookup_table =
+ "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+,";
+
/**
* ext4_fname_encode_digest() -
*
* Encodes the input digest using characters from the set [a-zA-Z0-9_+].
* The encoded string is roughly 4/3 times the size of the input string.
*/
-int ext4_fname_encode_digest(char *dst, char *src, u32 len)
+static int digest_encode(const char *src, int len, char *dst)
{
- static const char *lookup_table =
- "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_+";
- u32 current_chunk, num_chunks, i;
- char tmp_buf[3];
- u32 c0, c1, c2, c3;
-
- current_chunk = 0;
- num_chunks = len/3;
- for (i = 0; i < num_chunks; i++) {
- c0 = src[3*i] & 0x3f;
- c1 = (((src[3*i]>>6)&0x3) | ((src[3*i+1] & 0xf)<<2)) & 0x3f;
- c2 = (((src[3*i+1]>>4)&0xf) | ((src[3*i+2] & 0x3)<<4)) & 0x3f;
- c3 = (src[3*i+2]>>2) & 0x3f;
- dst[4*i] = lookup_table[c0];
- dst[4*i+1] = lookup_table[c1];
- dst[4*i+2] = lookup_table[c2];
- dst[4*i+3] = lookup_table[c3];
- }
- if (i*3 < len) {
- memset(tmp_buf, 0, 3);
- memcpy(tmp_buf, &src[3*i], len-3*i);
- c0 = tmp_buf[0] & 0x3f;
- c1 = (((tmp_buf[0]>>6)&0x3) | ((tmp_buf[1] & 0xf)<<2)) & 0x3f;
- c2 = (((tmp_buf[1]>>4)&0xf) | ((tmp_buf[2] & 0x3)<<4)) & 0x3f;
- c3 = (tmp_buf[2]>>2) & 0x3f;
- dst[4*i] = lookup_table[c0];
- dst[4*i+1] = lookup_table[c1];
- dst[4*i+2] = lookup_table[c2];
- dst[4*i+3] = lookup_table[c3];
+ int i = 0, bits = 0, ac = 0;
+ char *cp = dst;
+
+ while (i < len) {
+ ac += (((unsigned char) src[i]) << bits);
+ bits += 8;
+ do {
+ *cp++ = lookup_table[ac & 0x3f];
+ ac >>= 6;
+ bits -= 6;
+ } while (bits >= 6);
i++;
}
- return (i * 4);
+ if (bits)
+ *cp++ = lookup_table[ac & 0x3f];
+ return cp - dst;
}
-/**
- * ext4_fname_hash() -
- *
- * This function computes the hash of the input filename, and sets the output
- * buffer to the *encoded* digest. It returns the length of the digest as its
- * return value. Errors are returned as negative numbers. We trust the caller
- * to allocate sufficient memory to oname string.
- */
-static int ext4_fname_hash(struct ext4_fname_crypto_ctx *ctx,
- const struct ext4_str *iname,
- struct ext4_str *oname)
+static int digest_decode(const char *src, int len, char *dst)
{
- struct scatterlist sg;
- struct hash_desc desc = {
- .tfm = (struct crypto_hash *)ctx->htfm,
- .flags = CRYPTO_TFM_REQ_MAY_SLEEP
- };
- int res = 0;
-
- if (iname->len <= EXT4_FNAME_CRYPTO_DIGEST_SIZE) {
- res = ext4_fname_encode_digest(oname->name, iname->name,
- iname->len);
- oname->len = res;
- return res;
- }
-
- sg_init_one(&sg, iname->name, iname->len);
- res = crypto_hash_init(&desc);
- if (res) {
- printk(KERN_ERR
- "%s: Error initializing crypto hash; res = [%d]\n",
- __func__, res);
- goto out;
- }
- res = crypto_hash_update(&desc, &sg, iname->len);
- if (res) {
- printk(KERN_ERR
- "%s: Error updating crypto hash; res = [%d]\n",
- __func__, res);
- goto out;
- }
- res = crypto_hash_final(&desc,
- &oname->name[EXT4_FNAME_CRYPTO_DIGEST_SIZE]);
- if (res) {
- printk(KERN_ERR
- "%s: Error finalizing crypto hash; res = [%d]\n",
- __func__, res);
- goto out;
+ int i = 0, bits = 0, ac = 0;
+ const char *p;
+ char *cp = dst;
+
+ while (i < len) {
+ p = strchr(lookup_table, src[i]);
+ if (p == NULL || src[i] == 0)
+ return -2;
+ ac += (p - lookup_table) << bits;
+ bits += 6;
+ if (bits >= 8) {
+ *cp++ = ac & 0xff;
+ ac >>= 8;
+ bits -= 8;
+ }
+ i++;
}
- /* Encode the digest as a printable string--this will increase the
- * size of the digest */
- oname->name[0] = 'I';
- res = ext4_fname_encode_digest(oname->name+1,
- &oname->name[EXT4_FNAME_CRYPTO_DIGEST_SIZE],
- EXT4_FNAME_CRYPTO_DIGEST_SIZE) + 1;
- oname->len = res;
-out:
- return res;
+ if (ac)
+ return -1;
+ return cp - dst;
}
/**
if (IS_ERR(ctx))
return ctx;
+ ctx->flags = ei->i_crypt_policy_flags;
if (ctx->has_valid_key) {
if (ctx->key.mode != EXT4_ENCRYPTION_MODE_AES_256_CTS) {
printk_once(KERN_WARNING
u32 namelen)
{
u32 ciphertext_len;
+ int padding = 4 << (ctx->flags & EXT4_POLICY_FLAGS_PAD_MASK);
if (ctx == NULL)
return -EIO;
return -EACCES;
ciphertext_len = (namelen < EXT4_CRYPTO_BLOCK_SIZE) ?
EXT4_CRYPTO_BLOCK_SIZE : namelen;
+ ciphertext_len = ext4_fname_crypto_round_up(ciphertext_len, padding);
ciphertext_len = (ciphertext_len > ctx->lim)
? ctx->lim : ciphertext_len;
return (int) ciphertext_len;
u32 ilen, struct ext4_str *crypto_str)
{
unsigned int olen;
+ int padding = 4 << (ctx->flags & EXT4_POLICY_FLAGS_PAD_MASK);
if (!ctx)
return -EIO;
- olen = ext4_fname_crypto_round_up(ilen, EXT4_CRYPTO_BLOCK_SIZE);
+ if (padding < EXT4_CRYPTO_BLOCK_SIZE)
+ padding = EXT4_CRYPTO_BLOCK_SIZE;
+ olen = ext4_fname_crypto_round_up(ilen, padding);
crypto_str->len = olen;
if (olen < EXT4_FNAME_CRYPTO_DIGEST_SIZE*2)
olen = EXT4_FNAME_CRYPTO_DIGEST_SIZE*2;
* ext4_fname_disk_to_usr() - converts a filename from disk space to user space
*/
int _ext4_fname_disk_to_usr(struct ext4_fname_crypto_ctx *ctx,
- const struct ext4_str *iname,
- struct ext4_str *oname)
+ struct dx_hash_info *hinfo,
+ const struct ext4_str *iname,
+ struct ext4_str *oname)
{
+ char buf[24];
+ int ret;
+
if (ctx == NULL)
return -EIO;
if (iname->len < 3) {
}
if (ctx->has_valid_key)
return ext4_fname_decrypt(ctx, iname, oname);
- else
- return ext4_fname_hash(ctx, iname, oname);
+
+ if (iname->len <= EXT4_FNAME_CRYPTO_DIGEST_SIZE) {
+ ret = digest_encode(iname->name, iname->len, oname->name);
+ oname->len = ret;
+ return ret;
+ }
+ if (hinfo) {
+ memcpy(buf, &hinfo->hash, 4);
+ memcpy(buf+4, &hinfo->minor_hash, 4);
+ } else
+ memset(buf, 0, 8);
+ memcpy(buf + 8, iname->name + iname->len - 16, 16);
+ oname->name[0] = '_';
+ ret = digest_encode(buf, 24, oname->name+1);
+ oname->len = ret + 1;
+ return ret + 1;
}
int ext4_fname_disk_to_usr(struct ext4_fname_crypto_ctx *ctx,
+ struct dx_hash_info *hinfo,
const struct ext4_dir_entry_2 *de,
struct ext4_str *oname)
{
struct ext4_str iname = {.name = (unsigned char *) de->name,
.len = de->name_len };
- return _ext4_fname_disk_to_usr(ctx, &iname, oname);
+ return _ext4_fname_disk_to_usr(ctx, hinfo, &iname, oname);
}
const struct qstr *iname,
struct dx_hash_info *hinfo)
{
- struct ext4_str tmp, tmp2;
+ struct ext4_str tmp;
int ret = 0;
+ char buf[EXT4_FNAME_CRYPTO_DIGEST_SIZE+1];
- if (!ctx || !ctx->has_valid_key ||
+ if (!ctx ||
((iname->name[0] == '.') &&
((iname->len == 1) ||
((iname->name[1] == '.') && (iname->len == 2))))) {
return 0;
}
+ if (!ctx->has_valid_key && iname->name[0] == '_') {
+ if (iname->len != 33)
+ return -ENOENT;
+ ret = digest_decode(iname->name+1, iname->len, buf);
+ if (ret != 24)
+ return -ENOENT;
+ memcpy(&hinfo->hash, buf, 4);
+ memcpy(&hinfo->minor_hash, buf + 4, 4);
+ return 0;
+ }
+
+ if (!ctx->has_valid_key && iname->name[0] != '_') {
+ if (iname->len > 43)
+ return -ENOENT;
+ ret = digest_decode(iname->name, iname->len, buf);
+ ext4fs_dirhash(buf, ret, hinfo);
+ return 0;
+ }
+
/* First encrypt the plaintext name */
ret = ext4_fname_crypto_alloc_buffer(ctx, iname->len, &tmp);
if (ret < 0)
return ret;
ret = ext4_fname_encrypt(ctx, iname, &tmp);
- if (ret < 0)
- goto out;
-
- tmp2.len = (4 * ((EXT4_FNAME_CRYPTO_DIGEST_SIZE + 2) / 3)) + 1;
- tmp2.name = kmalloc(tmp2.len + 1, GFP_KERNEL);
- if (tmp2.name == NULL) {
- ret = -ENOMEM;
- goto out;
+ if (ret >= 0) {
+ ext4fs_dirhash(tmp.name, tmp.len, hinfo);
+ ret = 0;
}
- ret = ext4_fname_hash(ctx, &tmp, &tmp2);
- if (ret > 0)
- ext4fs_dirhash(tmp2.name, tmp2.len, hinfo);
- ext4_fname_crypto_free_buffer(&tmp2);
-out:
ext4_fname_crypto_free_buffer(&tmp);
return ret;
}
-/**
- * ext4_fname_disk_to_htree() - converts a filename from disk space to htree-access string
- */
-int ext4_fname_disk_to_hash(struct ext4_fname_crypto_ctx *ctx,
- const struct ext4_dir_entry_2 *de,
- struct dx_hash_info *hinfo)
+int ext4_fname_match(struct ext4_fname_crypto_ctx *ctx, struct ext4_str *cstr,
+ int len, const char * const name,
+ struct ext4_dir_entry_2 *de)
{
- struct ext4_str iname = {.name = (unsigned char *) de->name,
- .len = de->name_len};
- struct ext4_str tmp;
- int ret;
+ int ret = -ENOENT;
+ int bigname = (*name == '_');
- if (!ctx ||
- ((iname.name[0] == '.') &&
- ((iname.len == 1) ||
- ((iname.name[1] == '.') && (iname.len == 2))))) {
- ext4fs_dirhash(iname.name, iname.len, hinfo);
- return 0;
+ if (ctx->has_valid_key) {
+ if (cstr->name == NULL) {
+ struct qstr istr;
+
+ ret = ext4_fname_crypto_alloc_buffer(ctx, len, cstr);
+ if (ret < 0)
+ goto errout;
+ istr.name = name;
+ istr.len = len;
+ ret = ext4_fname_encrypt(ctx, &istr, cstr);
+ if (ret < 0)
+ goto errout;
+ }
+ } else {
+ if (cstr->name == NULL) {
+ cstr->name = kmalloc(32, GFP_KERNEL);
+ if (cstr->name == NULL)
+ return -ENOMEM;
+ if ((bigname && (len != 33)) ||
+ (!bigname && (len > 43)))
+ goto errout;
+ ret = digest_decode(name+bigname, len-bigname,
+ cstr->name);
+ if (ret < 0) {
+ ret = -ENOENT;
+ goto errout;
+ }
+ cstr->len = ret;
+ }
+ if (bigname) {
+ if (de->name_len < 16)
+ return 0;
+ ret = memcmp(de->name + de->name_len - 16,
+ cstr->name + 8, 16);
+ return (ret == 0) ? 1 : 0;
+ }
}
-
- tmp.len = (4 * ((EXT4_FNAME_CRYPTO_DIGEST_SIZE + 2) / 3)) + 1;
- tmp.name = kmalloc(tmp.len + 1, GFP_KERNEL);
- if (tmp.name == NULL)
- return -ENOMEM;
-
- ret = ext4_fname_hash(ctx, &iname, &tmp);
- if (ret > 0)
- ext4fs_dirhash(tmp.name, tmp.len, hinfo);
- ext4_fname_crypto_free_buffer(&tmp);
+ if (de->name_len != cstr->len)
+ return 0;
+ ret = memcmp(de->name, cstr->name, cstr->len);
+ return (ret == 0) ? 1 : 0;
+errout:
+ kfree(cstr->name);
+ cstr->name = NULL;
return ret;
}
}
res = 0;
+ ei->i_crypt_policy_flags = ctx.flags;
if (S_ISREG(inode->i_mode))
crypt_key->mode = ctx.contents_encryption_mode;
else if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
return 0;
return (memcmp(ctx.master_key_descriptor, policy->master_key_descriptor,
EXT4_KEY_DESCRIPTOR_SIZE) == 0 &&
+ (ctx.flags ==
+ policy->flags) &&
(ctx.contents_encryption_mode ==
policy->contents_encryption_mode) &&
(ctx.filenames_encryption_mode ==
printk(KERN_WARNING
"%s: Invalid contents encryption mode %d\n", __func__,
policy->contents_encryption_mode);
- res = -EINVAL;
- goto out;
+ return -EINVAL;
}
if (!ext4_valid_filenames_enc_mode(policy->filenames_encryption_mode)) {
printk(KERN_WARNING
"%s: Invalid filenames encryption mode %d\n", __func__,
policy->filenames_encryption_mode);
- res = -EINVAL;
- goto out;
+ return -EINVAL;
}
+ if (policy->flags & ~EXT4_POLICY_FLAGS_VALID)
+ return -EINVAL;
ctx.contents_encryption_mode = policy->contents_encryption_mode;
ctx.filenames_encryption_mode = policy->filenames_encryption_mode;
+ ctx.flags = policy->flags;
BUILD_BUG_ON(sizeof(ctx.nonce) != EXT4_KEY_DERIVATION_NONCE_SIZE);
get_random_bytes(ctx.nonce, EXT4_KEY_DERIVATION_NONCE_SIZE);
res = ext4_xattr_set(inode, EXT4_XATTR_INDEX_ENCRYPTION,
EXT4_XATTR_NAME_ENCRYPTION_CONTEXT, &ctx,
sizeof(ctx), 0);
-out:
if (!res)
ext4_set_inode_flag(inode, EXT4_INODE_ENCRYPT);
return res;
policy->version = 0;
policy->contents_encryption_mode = ctx.contents_encryption_mode;
policy->filenames_encryption_mode = ctx.filenames_encryption_mode;
+ policy->flags = ctx.flags;
memcpy(&policy->master_key_descriptor, ctx.master_key_descriptor,
EXT4_KEY_DESCRIPTOR_SIZE);
return 0;
EXT4_ENCRYPTION_MODE_AES_256_XTS;
ctx.filenames_encryption_mode =
EXT4_ENCRYPTION_MODE_AES_256_CTS;
+ ctx.flags = 0;
memset(ctx.master_key_descriptor, 0x42,
EXT4_KEY_DESCRIPTOR_SIZE);
res = 0;
} else {
/* Directory is encrypted */
err = ext4_fname_disk_to_usr(enc_ctx,
- de, &fname_crypto_str);
+ NULL, de, &fname_crypto_str);
if (err < 0)
goto errout;
if (!dir_emit(ctx,
/* on-disk additional length */
__u16 i_extra_isize;
+ char i_crypt_policy_flags;
/* Indicate the inline data space. */
u16 i_inline_off;
/* Metadata checksum algorithm codes */
#define EXT4_CRC32C_CHKSUM 1
-/* Encryption algorithms */
-#define EXT4_ENCRYPTION_MODE_INVALID 0
-#define EXT4_ENCRYPTION_MODE_AES_256_XTS 1
-#define EXT4_ENCRYPTION_MODE_AES_256_GCM 2
-#define EXT4_ENCRYPTION_MODE_AES_256_CBC 3
-
/*
* Structure of the super block
*/
int ext4_fname_crypto_alloc_buffer(struct ext4_fname_crypto_ctx *ctx,
u32 ilen, struct ext4_str *crypto_str);
int _ext4_fname_disk_to_usr(struct ext4_fname_crypto_ctx *ctx,
+ struct dx_hash_info *hinfo,
const struct ext4_str *iname,
struct ext4_str *oname);
int ext4_fname_disk_to_usr(struct ext4_fname_crypto_ctx *ctx,
+ struct dx_hash_info *hinfo,
const struct ext4_dir_entry_2 *de,
struct ext4_str *oname);
int ext4_fname_usr_to_disk(struct ext4_fname_crypto_ctx *ctx,
int ext4_fname_usr_to_hash(struct ext4_fname_crypto_ctx *ctx,
const struct qstr *iname,
struct dx_hash_info *hinfo);
-int ext4_fname_disk_to_hash(struct ext4_fname_crypto_ctx *ctx,
- const struct ext4_dir_entry_2 *de,
- struct dx_hash_info *hinfo);
int ext4_fname_crypto_namelen_on_disk(struct ext4_fname_crypto_ctx *ctx,
u32 namelen);
+int ext4_fname_match(struct ext4_fname_crypto_ctx *ctx, struct ext4_str *cstr,
+ int len, const char * const name,
+ struct ext4_dir_entry_2 *de);
+
#ifdef CONFIG_EXT4_FS_ENCRYPTION
void ext4_put_fname_crypto_ctx(struct ext4_fname_crypto_ctx **ctx);
char version;
char contents_encryption_mode;
char filenames_encryption_mode;
+ char flags;
char master_key_descriptor[EXT4_KEY_DESCRIPTOR_SIZE];
} __attribute__((__packed__));
#define EXT4_ENCRYPTION_CONTEXT_FORMAT_V1 1
#define EXT4_KEY_DERIVATION_NONCE_SIZE 16
+#define EXT4_POLICY_FLAGS_PAD_4 0x00
+#define EXT4_POLICY_FLAGS_PAD_8 0x01
+#define EXT4_POLICY_FLAGS_PAD_16 0x02
+#define EXT4_POLICY_FLAGS_PAD_32 0x03
+#define EXT4_POLICY_FLAGS_PAD_MASK 0x03
+#define EXT4_POLICY_FLAGS_VALID 0x03
+
/**
* Encryption context for inode
*
char format;
char contents_encryption_mode;
char filenames_encryption_mode;
- char reserved;
+ char flags;
char master_key_descriptor[EXT4_KEY_DESCRIPTOR_SIZE];
char nonce[EXT4_KEY_DERIVATION_NONCE_SIZE];
} __attribute__((__packed__));
struct crypto_hash *htfm;
struct page *workpage;
struct ext4_encryption_key key;
+ unsigned flags : 8;
unsigned has_valid_key : 1;
unsigned ctfm_key_is_ready : 1;
};
if (ret)
return ret;
- /*
- * currently supporting (pre)allocate mode for extent-based
- * files _only_
- */
- if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
- return -EOPNOTSUPP;
-
if (mode & FALLOC_FL_COLLAPSE_RANGE)
return ext4_collapse_range(inode, offset, len);
mutex_lock(&inode->i_mutex);
+ /*
+ * We only support preallocation for extent-based files only
+ */
+ if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
if (!(mode & FALLOC_FL_KEEP_SIZE) &&
offset + len > i_size_read(inode)) {
new_size = offset + len;
BUG_ON(end < lblk);
+ if ((status & EXTENT_STATUS_DELAYED) &&
+ (status & EXTENT_STATUS_WRITTEN)) {
+ ext4_warning(inode->i_sb, "Inserting extent [%u/%u] as "
+ " delayed and written which can potentially "
+ " cause data loss.\n", lblk, len);
+ WARN_ON(1);
+ }
+
newes.es_lblk = lblk;
newes.es_len = len;
ext4_es_store_pblock_status(&newes, pblk, status);
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) &&
+ !(status & EXTENT_STATUS_WRITTEN) &&
ext4_find_delalloc_range(inode, map->m_lblk,
map->m_lblk + map->m_len - 1))
status |= EXTENT_STATUS_DELAYED;
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) &&
+ !(status & EXTENT_STATUS_WRITTEN) &&
ext4_find_delalloc_range(inode, map->m_lblk,
map->m_lblk + map->m_len - 1))
status |= EXTENT_STATUS_DELAYED;
ext4_put_fname_crypto_ctx(&ctx);
ctx = NULL;
}
- res = ext4_fname_disk_to_usr(ctx, de,
+ res = ext4_fname_disk_to_usr(ctx, NULL, de,
&fname_crypto_str);
if (res < 0) {
printk(KERN_WARNING "Error "
name = fname_crypto_str.name;
len = fname_crypto_str.len;
}
- res = ext4_fname_disk_to_hash(ctx, de,
- &h);
- if (res < 0) {
- printk(KERN_WARNING "Error "
- "converting filename "
- "from disk to htree"
- "\n");
- h.hash = 0xDEADBEEF;
- }
+ ext4fs_dirhash(de->name, de->name_len,
+ &h);
printk("%*.s:(E)%x.%u ", len, name,
h.hash, (unsigned) ((char *) de
- base));
/* silently ignore the rest of the block */
break;
}
-#ifdef CONFIG_EXT4_FS_ENCRYPTION
- err = ext4_fname_disk_to_hash(ctx, de, hinfo);
- if (err < 0) {
- count = err;
- goto errout;
- }
-#else
ext4fs_dirhash(de->name, de->name_len, hinfo);
-#endif
if ((hinfo->hash < start_hash) ||
((hinfo->hash == start_hash) &&
(hinfo->minor_hash < start_minor_hash)))
&tmp_str);
} else {
/* Directory is encrypted */
- err = ext4_fname_disk_to_usr(ctx, de,
+ err = ext4_fname_disk_to_usr(ctx, hinfo, de,
&fname_crypto_str);
if (err < 0) {
count = err;
int count = 0;
char *base = (char *) de;
struct dx_hash_info h = *hinfo;
-#ifdef CONFIG_EXT4_FS_ENCRYPTION
- struct ext4_fname_crypto_ctx *ctx = NULL;
- int err;
-
- ctx = ext4_get_fname_crypto_ctx(dir, EXT4_NAME_LEN);
- if (IS_ERR(ctx))
- return PTR_ERR(ctx);
-#endif
while ((char *) de < base + blocksize) {
if (de->name_len && de->inode) {
-#ifdef CONFIG_EXT4_FS_ENCRYPTION
- err = ext4_fname_disk_to_hash(ctx, de, &h);
- if (err < 0) {
- ext4_put_fname_crypto_ctx(&ctx);
- return err;
- }
-#else
ext4fs_dirhash(de->name, de->name_len, &h);
-#endif
map_tail--;
map_tail->hash = h.hash;
map_tail->offs = ((char *) de - base)>>2;
/* XXX: do we need to check rec_len == 0 case? -Chris */
de = ext4_next_entry(de, blocksize);
}
-#ifdef CONFIG_EXT4_FS_ENCRYPTION
- ext4_put_fname_crypto_ctx(&ctx);
-#endif
return count;
}
return 0;
#ifdef CONFIG_EXT4_FS_ENCRYPTION
- if (ctx) {
- /* Directory is encrypted */
- res = ext4_fname_disk_to_usr(ctx, de, fname_crypto_str);
- if (res < 0)
- return res;
- if (len != res)
- return 0;
- res = memcmp(name, fname_crypto_str->name, len);
- return (res == 0) ? 1 : 0;
- }
+ if (ctx)
+ return ext4_fname_match(ctx, fname_crypto_str, len, name, de);
#endif
if (len != de->name_len)
return 0;
if (IS_ERR(ctx))
return -1;
- if (ctx != NULL) {
- /* Allocate buffer to hold maximum name length */
- res = ext4_fname_crypto_alloc_buffer(ctx, EXT4_NAME_LEN,
- &fname_crypto_str);
- if (res < 0) {
- ext4_put_fname_crypto_ctx(&ctx);
- return -1;
- }
- }
-
de = (struct ext4_dir_entry_2 *)search_buf;
dlimit = search_buf + buf_size;
while ((char *) de < dlimit) {
return res;
}
reclen = EXT4_DIR_REC_LEN(res);
-
- /* Allocate buffer to hold maximum name length */
- res = ext4_fname_crypto_alloc_buffer(ctx, EXT4_NAME_LEN,
- &fname_crypto_str);
- if (res < 0) {
- ext4_put_fname_crypto_ctx(&ctx);
- return -1;
- }
}
de = (struct ext4_dir_entry_2 *)buf;
goto exit;
/*
* We will always be modifying at least the superblock and GDT
- * block. If we are adding a group past the last current GDT block,
+ * blocks. If we are adding a group past the last current GDT block,
* we will also modify the inode and the dindirect block. If we
* are adding a group with superblock/GDT backups we will also
* modify each of the reserved GDT dindirect blocks.
*/
- credit = flex_gd->count * 4 + reserved_gdb;
+ credit = 3; /* sb, resize inode, resize inode dindirect */
+ /* GDT blocks */
+ credit += 1 + DIV_ROUND_UP(flex_gd->count, EXT4_DESC_PER_BLOCK(sb));
+ credit += reserved_gdb; /* Reserved GDT dindirect blocks */
handle = ext4_journal_start_sb(sb, EXT4_HT_RESIZE, credit);
if (IS_ERR(handle)) {
err = PTR_ERR(handle);
goto errout;
}
pstr.name = paddr;
- res = _ext4_fname_disk_to_usr(ctx, &cstr, &pstr);
+ res = _ext4_fname_disk_to_usr(ctx, NULL, &cstr, &pstr);
if (res < 0)
goto errout;
/* Null-terminate the name */
{
struct inode *inode = mapping->host;
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
+ bool locked = false;
int ret;
long diff;
diff = nr_pages_to_write(sbi, DATA, wbc);
+ if (!S_ISDIR(inode->i_mode)) {
+ mutex_lock(&sbi->writepages);
+ locked = true;
+ }
ret = write_cache_pages(mapping, wbc, __f2fs_writepage, mapping);
+ if (locked)
+ mutex_unlock(&sbi->writepages);
f2fs_submit_merged_bio(sbi, DATA, WRITE);
struct mutex cp_mutex; /* checkpoint procedure lock */
struct rw_semaphore cp_rwsem; /* blocking FS operations */
struct rw_semaphore node_write; /* locking node writes */
+ struct mutex writepages; /* mutex for writepages() */
wait_queue_head_t cp_wait;
struct inode_management im[MAX_INO_ENTRY]; /* manage inode cache */
static void *f2fs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
- struct page *page;
+ struct page *page = page_follow_link_light(dentry, nd);
- page = page_follow_link_light(dentry, nd);
- if (IS_ERR(page))
+ if (IS_ERR_OR_NULL(page))
return page;
/* this is broken symlink case */
if (*nd_get_link(nd) == 0) {
- kunmap(page);
- page_cache_release(page);
+ page_put_link(dentry, nd, page);
return ERR_PTR(-ENOENT);
}
return page;
sbi->raw_super = raw_super;
sbi->raw_super_buf = raw_super_buf;
mutex_init(&sbi->gc_mutex);
+ mutex_init(&sbi->writepages);
mutex_init(&sbi->cp_mutex);
init_rwsem(&sbi->node_write);
clear_sbi_flag(sbi, SBI_POR_DOING);
*/
if (nd->flags & LOOKUP_RCU) {
unsigned seq;
+ bool negative;
dentry = __d_lookup_rcu(parent, &nd->last, &seq);
if (!dentry)
goto unlazy;
* the dentry name information from lookup.
*/
*inode = dentry->d_inode;
+ negative = d_is_negative(dentry);
if (read_seqcount_retry(&dentry->d_seq, seq))
return -ECHILD;
+ if (negative)
+ return -ENOENT;
/*
* This sequence count validates that the parent had no
goto need_lookup;
}
+ if (unlikely(d_is_negative(dentry))) {
+ dput(dentry);
+ return -ENOENT;
+ }
path->mnt = mnt;
path->dentry = dentry;
err = follow_managed(path, nd->flags);
goto out_err;
inode = path->dentry->d_inode;
+ err = -ENOENT;
+ if (d_is_negative(path->dentry))
+ goto out_path_put;
}
- err = -ENOENT;
- if (d_is_negative(path->dentry))
- goto out_path_put;
if (should_follow_link(path->dentry, follow)) {
if (nd->flags & LOOKUP_RCU) {
BUG_ON(nd->flags & LOOKUP_RCU);
inode = path->dentry->d_inode;
-finish_lookup:
- /* we _can_ be in RCU mode here */
error = -ENOENT;
if (d_is_negative(path->dentry)) {
path_to_nameidata(path, nd);
goto out;
}
-
+finish_lookup:
+ /* we _can_ be in RCU mode here */
if (should_follow_link(path->dentry, !symlink_ok)) {
if (nd->flags & LOOKUP_RCU) {
if (unlikely(nd->path.mnt != path->mnt ||
if (unlikely(file->f_flags & __O_TMPFILE)) {
error = do_tmpfile(dfd, pathname, nd, flags, op, file, &opened);
- goto out;
+ goto out2;
}
error = path_init(dfd, pathname, flags, nd);
}
out:
path_cleanup(nd);
+out2:
if (!(opened & FILE_OPENED)) {
BUG_ON(!error);
put_filp(file);
if (mnt->mnt.mnt_sb->s_type != type)
continue;
+ /* This mount is not fully visible if it's root directory
+ * is not the root directory of the filesystem.
+ */
+ if (mnt->mnt.mnt_root != mnt->mnt.mnt_sb->s_root)
+ continue;
+
/* This mount is not fully visible if there are any child mounts
* that cover anything except for empty directories.
*/
nchildren = nilfs_btree_node_get_nchildren(node);
if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN ||
- level > NILFS_BTREE_LEVEL_MAX ||
+ level >= NILFS_BTREE_LEVEL_MAX ||
nchildren < 0 ||
nchildren > NILFS_BTREE_ROOT_NCHILDREN_MAX)) {
pr_crit("NILFS: bad btree root (inode number=%lu): level = %d, flags = 0x%x, nchildren = %d\n",
if (tmpres) {
spin_unlock(&dlm->spinlock);
spin_lock(&tmpres->spinlock);
+
+ /*
+ * Right after dlm spinlock was released, dlm_thread could have
+ * purged the lockres. Check if lockres got unhashed. If so
+ * start over.
+ */
+ if (hlist_unhashed(&tmpres->hash_node)) {
+ spin_unlock(&tmpres->spinlock);
+ dlm_lockres_put(tmpres);
+ tmpres = NULL;
+ goto lookup;
+ }
+
/* Wait on the thread that is mastering the resource */
if (tmpres->owner == DLM_LOCK_RES_OWNER_UNKNOWN) {
__dlm_wait_on_lockres(tmpres);
long ret, bytes;
umode_t i_mode;
size_t len;
- int i, flags;
+ int i, flags, more;
/*
* We require the input being a regular file, as we don't want to
* Don't block on output, we have to drain the direct pipe.
*/
sd->flags &= ~SPLICE_F_NONBLOCK;
+ more = sd->flags & SPLICE_F_MORE;
while (len) {
size_t read_len;
read_len = ret;
sd->total_len = read_len;
+ /*
+ * If more data is pending, set SPLICE_F_MORE
+ * If this is the last data and SPLICE_F_MORE was not set
+ * initially, clears it.
+ */
+ if (read_len < len)
+ sd->flags |= SPLICE_F_MORE;
+ else if (!more)
+ sd->flags &= ~SPLICE_F_MORE;
/*
* NOTE: nonblocking mode only applies to the input. We
* must not do the output in nonblocking mode as then we
#ifndef ACPI_USE_SYSTEM_INTTYPES
-typedef unsigned char u8;
typedef unsigned char u8;
typedef unsigned short u16;
typedef short s16;
#define R8A73A4_CLK_IIC3 11
#define R8A73A4_CLK_IIC4 10
#define R8A73A4_CLK_IIC5 9
+#define R8A73A4_CLK_IRQC 7
/* MSTP5 */
#define R8A73A4_CLK_THERMAL 22
#define R8A7790_CLK_USBDMAC0 30
#define R8A7790_CLK_USBDMAC1 31
+/* MSTP4 */
+#define R8A7790_CLK_IRQC 7
+
/* MSTP5 */
#define R8A7790_CLK_AUDIO_DMAC1 1
#define R8A7790_CLK_AUDIO_DMAC0 2
#define R8A7791_CLK_USBDMAC0 30
#define R8A7791_CLK_USBDMAC1 31
+/* MSTP4 */
+#define R8A7791_CLK_IRQC 7
+
/* MSTP5 */
#define R8A7791_CLK_AUDIO_DMAC1 1
#define R8A7791_CLK_AUDIO_DMAC0 2
#define R8A7794_CLK_USBDMAC0 30
#define R8A7794_CLK_USBDMAC1 31
+/* MSTP4 */
+#define R8A7794_CLK_IRQC 7
+
/* MSTP5 */
#define R8A7794_CLK_THERMAL 22
#define R8A7794_CLK_PWM 23
--- /dev/null
+/*
+ * This header provides shared DT/Driver defines for ST's LPC device
+ *
+ * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
+ *
+ * Author: Lee Jones <lee.jones@linaro.org> for STMicroelectronics
+ */
+
+#ifndef __DT_BINDINGS_ST_LPC_H__
+#define __DT_BINDINGS_ST_LPC_H__
+
+#define ST_LPC_MODE_RTC 0
+#define ST_LPC_MODE_WDT 1
+
+#endif /* __DT_BINDINGS_ST_LPC_H__ */
#define SLEWCTRL_SLOW (1 << 19)
#define SLEWCTRL_FAST 0
#define DS0_PULL_UP_DOWN_EN (1 << 27)
+#define WAKEUP_ENABLE (1 << 29)
#define PIN_OUTPUT (PULL_DISABLE)
#define PIN_OUTPUT_PULLUP (PULL_UP)
--- /dev/null
+/*
+ * Header providing constants for bcm2835 pinctrl bindings.
+ *
+ * Copyright (C) 2015 Stefan Wahren <stefan.wahren@i2se.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_BCM2835_H__
+#define __DT_BINDINGS_PINCTRL_BCM2835_H__
+
+/* brcm,function property */
+#define BCM2835_FSEL_GPIO_IN 0
+#define BCM2835_FSEL_GPIO_OUT 1
+#define BCM2835_FSEL_ALT5 2
+#define BCM2835_FSEL_ALT4 3
+#define BCM2835_FSEL_ALT0 4
+#define BCM2835_FSEL_ALT1 5
+#define BCM2835_FSEL_ALT2 6
+#define BCM2835_FSEL_ALT3 7
+
+#endif /* __DT_BINDINGS_PINCTRL_BCM2835_H__ */
/* This mask is used for both bio and request merge checking */
#define REQ_NOMERGE_FLAGS \
- (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA)
+ (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA | REQ_FLUSH_SEQ)
#define REQ_RAHEAD (1ULL << __REQ_RAHEAD)
#define REQ_THROTTLED (1ULL << __REQ_THROTTLED)
+ __GNUC_MINOR__ * 100 \
+ __GNUC_PATCHLEVEL__)
-
/* Optimization barrier */
+
/* The "volatile" is due to gcc bugs */
#define barrier() __asm__ __volatile__("": : :"memory")
+/*
+ * This version is i.e. to prevent dead stores elimination on @ptr
+ * where gcc and llvm may behave differently when otherwise using
+ * normal barrier(): while gcc behavior gets along with a normal
+ * barrier(), llvm needs an explicit input variable to be assumed
+ * clobbered. The issue is as follows: while the inline asm might
+ * access any memory it wants, the compiler could have fit all of
+ * @ptr into memory registers instead, and since @ptr never escaped
+ * from that, it proofed that the inline asm wasn't touching any of
+ * it. This version works well with both compilers, i.e. we're telling
+ * the compiler that the inline asm absolutely may see the contents
+ * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495
+ */
+#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory")
/*
* This macro obfuscates arithmetic on a variable address so that gcc
/* Intel ECC compiler doesn't support gcc specific asm stmts.
* It uses intrinsics to do the equivalent things.
*/
+#undef barrier_data
#undef RELOC_HIDE
#undef OPTIMIZER_HIDE_VAR
+#define barrier_data(ptr) barrier()
+
#define RELOC_HIDE(ptr, off) \
({ unsigned long __ptr; \
__ptr = (unsigned long) (ptr); \
# define barrier() __memory_barrier()
#endif
+#ifndef barrier_data
+# define barrier_data(ptr) barrier()
+#endif
+
/* Unreachable code */
#ifndef unreachable
# define unreachable() do { } while (1)
const unsigned char *buf, int len);
const char *ftrace_print_array_seq(struct trace_seq *p,
- const void *buf, int buf_len,
+ const void *buf, int count,
size_t el_size);
struct trace_iterator;
struct device_node;
-extern struct irq_chip gic_arch_extn;
-
void gic_set_irqchip_flags(unsigned long flags);
void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
u32 offset, struct device_node *);
#error KEXEC_CONTROL_MEMORY_LIMIT not defined
#endif
+#ifndef KEXEC_CONTROL_MEMORY_GFP
+#define KEXEC_CONTROL_MEMORY_GFP GFP_KERNEL
+#endif
+
#ifndef KEXEC_CONTROL_PAGE_SIZE
#error KEXEC_CONTROL_PAGE_SIZE not defined
#endif
struct wireless_dev;
/* 802.15.4 specific */
struct wpan_dev;
+struct mpls_dev;
void netdev_set_default_ethtool_ops(struct net_device *dev,
const struct ethtool_ops *ops);
* int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh,
* u16 flags)
* int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq,
- * struct net_device *dev, u32 filter_mask)
+ * struct net_device *dev, u32 filter_mask,
+ * int nlflags)
* int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh,
* u16 flags);
*
int (*ndo_bridge_getlink)(struct sk_buff *skb,
u32 pid, u32 seq,
struct net_device *dev,
- u32 filter_mask);
+ u32 filter_mask,
+ int nlflags);
int (*ndo_bridge_dellink)(struct net_device *dev,
struct nlmsghdr *nlh,
u16 flags);
void *ax25_ptr;
struct wireless_dev *ieee80211_ptr;
struct wpan_dev *ieee802154_ptr;
+#if IS_ENABLED(CONFIG_MPLS_ROUTING)
+ struct mpls_dev __rcu *mpls_ptr;
+#endif
/*
* Cache lines mostly used on receive path (including eth_type_trans())
({ \
typeof(type) __percpu *pcpu_stats = alloc_percpu(type); \
if (pcpu_stats) { \
- int i; \
- for_each_possible_cpu(i) { \
+ int __cpu; \
+ for_each_possible_cpu(__cpu) { \
typeof(type) *stat; \
- stat = per_cpu_ptr(pcpu_stats, i); \
+ stat = per_cpu_ptr(pcpu_stats, __cpu); \
u64_stats_init(&stat->syncp); \
} \
} \
static inline int nf_bridge_get_physinif(const struct sk_buff *skb)
{
- return skb->nf_bridge ? skb->nf_bridge->physindev->ifindex : 0;
+ struct nf_bridge_info *nf_bridge;
+
+ if (skb->nf_bridge == NULL)
+ return 0;
+
+ nf_bridge = skb->nf_bridge;
+ return nf_bridge->physindev ? nf_bridge->physindev->ifindex : 0;
}
static inline int nf_bridge_get_physoutif(const struct sk_buff *skb)
{
- return skb->nf_bridge ? skb->nf_bridge->physoutdev->ifindex : 0;
+ struct nf_bridge_info *nf_bridge;
+
+ if (skb->nf_bridge == NULL)
+ return 0;
+
+ nf_bridge = skb->nf_bridge;
+ return nf_bridge->physoutdev ? nf_bridge->physoutdev->ifindex : 0;
}
static inline struct net_device *
/* level */
#define NILFS_BTREE_LEVEL_DATA 0
#define NILFS_BTREE_LEVEL_NODE_MIN (NILFS_BTREE_LEVEL_DATA + 1)
-#define NILFS_BTREE_LEVEL_MAX 14
+#define NILFS_BTREE_LEVEL_MAX 14 /* Max level (exclusive) */
/**
* struct nilfs_palloc_group_desc - block group descriptor
#define PCI_VENDOR_ID_INTEL 0x8086
#define PCI_DEVICE_ID_INTEL_EESSC 0x0008
-#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100
-#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154
-#define PCI_DEVICE_ID_INTEL_IVB_E3_IMC 0x0150
-#define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00
#define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320
#define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321
#define PCI_DEVICE_ID_INTEL_PXH_0 0x0329
static inline bool rht_grow_above_100(const struct rhashtable *ht,
const struct bucket_table *tbl)
{
- return atomic_read(&ht->nelems) > tbl->size;
+ return atomic_read(&ht->nelems) > tbl->size &&
+ (!ht->p.max_size || tbl->size < ht->p.max_size);
}
/* The bucket lock is selected based on the hash and protects mutations
extern int ndo_dflt_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
struct net_device *dev, u16 mode,
- u32 flags, u32 mask);
+ u32 flags, u32 mask, int nlflags);
#endif /* __LINUX_RTNETLINK_H */
extern void calc_global_load(unsigned long ticks);
extern void update_cpu_load_nohz(void);
-/* Notifier for when a task gets migrated to a new CPU */
-struct task_migration_notifier {
- struct task_struct *task;
- int from_cpu;
- int to_cpu;
-};
-extern void register_task_migration_notifier(struct notifier_block *n);
-
extern unsigned long get_parent_ip(unsigned long addr);
extern void dump_cpu_task(int cpu);
struct sk_buff *__alloc_skb(unsigned int size, gfp_t priority, int flags,
int node);
+struct sk_buff *__build_skb(void *data, unsigned int frag_size);
struct sk_buff *build_skb(void *data, unsigned int frag_size);
static inline struct sk_buff *alloc_skb(unsigned int size,
gfp_t priority)
extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old);
extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
+extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
extern void tty_ldisc_deref(struct tty_ldisc *);
/* Cannot handle ATA_12 or ATA_16 CDBs */ \
US_FLAG(NO_REPORT_OPCODES, 0x04000000) \
/* Cannot handle MI_REPORT_SUPPORTED_OPERATION_CODES */ \
+ US_FLAG(MAX_SECTORS_240, 0x08000000) \
+ /* Sets max_sectors to 240 */ \
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
({ \
typeof(as) __fc_i, __fc_as = (as) - 1; \
typeof(x) __fc_x = (x); \
- typeof(*a) *__fc_a = (a); \
+ typeof(*a) const *__fc_a = (a); \
for (__fc_i = 0; __fc_i < __fc_as; __fc_i++) { \
if (__fc_x op DIV_ROUND_CLOSEST(__fc_a[__fc_i] + \
__fc_a[__fc_i + 1], 2)) \
#include <net/bond_alb.h>
#include <net/bond_options.h>
-#define DRV_VERSION "3.7.1"
-#define DRV_RELDATE "April 27, 2011"
-#define DRV_NAME "bonding"
-#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
-
-#define bond_version DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n"
-
#define BOND_MAX_ARP_TARGETS 16
#define BOND_DEFAULT_MIIMON 100
void inet_csk_reqsk_queue_hash_add(struct sock *sk, struct request_sock *req,
unsigned long timeout);
-static inline void inet_csk_reqsk_queue_removed(struct sock *sk,
- struct request_sock *req)
-{
- reqsk_queue_removed(&inet_csk(sk)->icsk_accept_queue, req);
-}
-
static inline void inet_csk_reqsk_queue_added(struct sock *sk,
const unsigned long timeout)
{
return reqsk_queue_is_full(&inet_csk(sk)->icsk_accept_queue);
}
-static inline void inet_csk_reqsk_queue_unlink(struct sock *sk,
- struct request_sock *req)
-{
- reqsk_queue_unlink(&inet_csk(sk)->icsk_accept_queue, req);
-}
-
-static inline void inet_csk_reqsk_queue_drop(struct sock *sk,
- struct request_sock *req)
-{
- inet_csk_reqsk_queue_unlink(sk, req);
- inet_csk_reqsk_queue_removed(sk, req);
- reqsk_put(req);
-}
+void inet_csk_reqsk_queue_drop(struct sock *sk, struct request_sock *req);
void inet_csk_destroy_sock(struct sock *sk);
void inet_csk_prepare_forced_close(struct sock *sk);
return queue->rskq_accept_head == NULL;
}
-static inline void reqsk_queue_unlink(struct request_sock_queue *queue,
- struct request_sock *req)
-{
- struct listen_sock *lopt = queue->listen_opt;
- struct request_sock **prev;
-
- spin_lock(&queue->syn_wait_lock);
-
- prev = &lopt->syn_table[req->rsk_hash];
- while (*prev != req)
- prev = &(*prev)->dl_next;
- *prev = req->dl_next;
-
- spin_unlock(&queue->syn_wait_lock);
- if (del_timer(&req->rsk_timer))
- reqsk_put(req);
-}
-
static inline void reqsk_queue_add(struct request_sock_queue *queue,
struct request_sock *req,
struct sock *parent,
}
/* Important - sockaddr should be a union of sockaddr_in and sockaddr_in6 */
-static inline int rdma_gid2ip(struct sockaddr *out, union ib_gid *gid)
+static inline void rdma_gid2ip(struct sockaddr *out, union ib_gid *gid)
{
if (ipv6_addr_v4mapped((struct in6_addr *)gid)) {
struct sockaddr_in *out_in = (struct sockaddr_in *)out;
out_in->sin6_family = AF_INET6;
memcpy(&out_in->sin6_addr.s6_addr, gid->raw, 16);
}
- return 0;
}
static inline void iboe_addr_get_sgid(struct rdma_dev_addr *dev_addr,
IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE = 216,
IB_CM_SIDR_REP_PRIVATE_DATA_SIZE = 136,
IB_CM_SIDR_REP_INFO_LENGTH = 72,
- IB_CM_COMPARE_SIZE = 64
+ /* compare done u32 at a time */
+ IB_CM_COMPARE_SIZE = (64 / sizeof(u32))
};
struct ib_cm_id;
#define IB_SDP_SERVICE_ID_MASK cpu_to_be64(0xFFFFFFFFFFFF0000ULL)
struct ib_cm_compare_data {
- u8 data[IB_CM_COMPARE_SIZE];
- u8 mask[IB_CM_COMPARE_SIZE];
+ u32 data[IB_CM_COMPARE_SIZE];
+ u32 mask[IB_CM_COMPARE_SIZE];
};
/**
*/
int iwpm_add_and_query_mapping_cb(struct sk_buff *, struct netlink_callback *);
+/**
+ * iwpm_remote_info_cb - Process remote connecting peer address info, which
+ * the port mapper has received from the connecting peer
+ *
+ * @cb: Contains the received message (payload and netlink header)
+ *
+ * Stores the IPv4/IPv6 address info in a hash table
+ */
+int iwpm_remote_info_cb(struct sk_buff *, struct netlink_callback *);
+
/**
* iwpm_mapping_error_cb - Process port mapper notification for error
*
*/
int iwpm_ack_mapping_info_cb(struct sk_buff *, struct netlink_callback *);
+/**
+ * iwpm_get_remote_info - Get the remote connecting peer address info
+ *
+ * @mapped_loc_addr: Mapped local address of the listening peer
+ * @mapped_rem_addr: Mapped remote address of the connecting peer
+ * @remote_addr: To store the remote address of the connecting peer
+ * @nl_client: The index of the netlink client
+ *
+ * The remote address info is retrieved and provided to the client in
+ * the remote_addr. After that it is removed from the hash table
+ */
+int iwpm_get_remote_info(struct sockaddr_storage *mapped_loc_addr,
+ struct sockaddr_storage *mapped_rem_addr,
+ struct sockaddr_storage *remote_addr, u8 nl_client);
+
/**
* iwpm_create_mapinfo - Store local and mapped IPv4/IPv6 address
* info in a hash table
for sequential scan */
#define BLIST_TRY_VPD_PAGES 0x10000000 /* Attempt to read VPD pages */
#define BLIST_NO_RSOC 0x20000000 /* don't try to issue RSOC */
+#define BLIST_MAX_1024 0x40000000 /* maximum 1024 sector cdb length */
#endif
/*
- * Copyright (ST) 2012 Rajeev Kumar (rajeev-dlh.kumar@st.com)
+ * Copyright (ST) 2012 Rajeev Kumar (rajeevkumar.linux@gmail.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define EMUPAGESIZE 4096
#define MAXREQVOICES 8
-#define MAXPAGES 8192
+#define MAXPAGES0 4096 /* 32 bit mode */
+#define MAXPAGES1 8192 /* 31 bit mode */
#define RESERVED 0
#define NUM_MIDI 16
#define NUM_G 64 /* use all channels */
/* FIXME? - according to the OSS driver the EMU10K1 needs a 29 bit DMA mask */
#define EMU10K1_DMA_MASK 0x7fffffffUL /* 31bit */
-#define AUDIGY_DMA_MASK 0x7fffffffUL /* 31bit FIXME - 32 should work? */
- /* See ALSA bug #1276 - rlrevell */
+#define AUDIGY_DMA_MASK 0xffffffffUL /* 32bit mode */
#define TMEMSIZE 256*1024
#define TMEMSIZEREG 4
#define MAPB 0x0d /* Cache map B */
-#define MAP_PTE_MASK 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */
-#define MAP_PTI_MASK 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */
+#define MAP_PTE_MASK0 0xfffff000 /* The 20 MSBs of the PTE indexed by the PTI */
+#define MAP_PTI_MASK0 0x00000fff /* The 12 bit index to one of the 4096 PTE dwords */
+
+#define MAP_PTE_MASK1 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */
+#define MAP_PTI_MASK1 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */
/* 0x0e, 0x0f: Not used */
unsigned short model; /* subsystem id */
unsigned int card_type; /* EMU10K1_CARD_* */
unsigned int ecard_ctrl; /* ecard control bits */
+ unsigned int address_mode; /* address mode */
unsigned long dma_mask; /* PCI DMA mask */
unsigned int delay_pcm_irq; /* in samples */
int max_cache_pages; /* max memory size / PAGE_SIZE */
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, \
- .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) }
+ .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 1) }
#define SOC_DAPM_SINGLE_TLV_VIRT(xname, max, tlv_array) \
SOC_DAPM_SINGLE(xname, SND_SOC_NOPM, 0, max, 0, tlv_array)
#define SOC_DAPM_ENUM(xname, xenum) \
int snd_soc_register_card(struct snd_soc_card *card);
int snd_soc_unregister_card(struct snd_soc_card *card);
int devm_snd_soc_register_card(struct device *dev, struct snd_soc_card *card);
+#ifdef CONFIG_PM_SLEEP
int snd_soc_suspend(struct device *dev);
int snd_soc_resume(struct device *dev);
+#else
+static inline int snd_soc_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static inline int snd_soc_resume(struct device *dev)
+{
+ return 0;
+}
+#endif
int snd_soc_poweroff(struct device *dev);
int snd_soc_register_platform(struct device *dev,
const struct snd_soc_platform_driver *platform_drv);
/*
* linux/spear_dma.h
*
-* Copyright (ST) 2012 Rajeev Kumar (rajeev-dlh.kumar@st.com)
+* Copyright (ST) 2012 Rajeev Kumar (rajeevkumar.linux@gmail.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
}
/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
-/* Assuming a given event_idx value from the other size, if
+/* Assuming a given event_idx value from the other side, if
* we have just incremented index from old to new_idx,
* should we trigger an event? */
static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
RDMA_NL_IWPM_ADD_MAPPING,
RDMA_NL_IWPM_QUERY_MAPPING,
RDMA_NL_IWPM_REMOVE_MAPPING,
+ RDMA_NL_IWPM_REMOTE_INFO,
RDMA_NL_IWPM_HANDLE_ERR,
RDMA_NL_IWPM_MAPINFO,
RDMA_NL_IWPM_MAPINFO_NUM,
struct gnttab_unmap_grant_ref *kunmap_ops,
struct page **pages, unsigned int count);
void gnttab_unmap_refs_async(struct gntab_unmap_queue_data* item);
+int gnttab_unmap_refs_sync(struct gntab_unmap_queue_data *item);
/* Perform a batch of grant map/copy operations. Retry every batch slot
void xen_timer_resume(void);
void xen_arch_resume(void);
+void xen_arch_suspend(void);
void xen_resume_notifier_register(struct notifier_block *nb);
void xen_resume_notifier_unregister(struct notifier_block *nb);
#endif
if (strncmp(name, "/dev/", 5) != 0) {
- unsigned maj, min;
+ unsigned maj, min, offset;
char dummy;
- if (sscanf(name, "%u:%u%c", &maj, &min, &dummy) == 2) {
+ if ((sscanf(name, "%u:%u%c", &maj, &min, &dummy) == 2) ||
+ (sscanf(name, "%u:%u:%u:%c", &maj, &min, &offset, &dummy) == 3)) {
res = MKDEV(maj, min);
if (maj != MAJOR(res) || min != MINOR(res))
goto fail;
@echo >>x509.genkey "x509_extensions = myexts"
@echo >>x509.genkey
@echo >>x509.genkey "[ req_distinguished_name ]"
- @echo >>x509.genkey "O = Magrathea"
- @echo >>x509.genkey "CN = Glacier signing key"
- @echo >>x509.genkey "emailAddress = slartibartfast@magrathea.h2g2"
+ @echo >>x509.genkey "#O = Unspecified company"
+ @echo >>x509.genkey "CN = Build time autogenerated kernel key"
+ @echo >>x509.genkey "#emailAddress = unspecified.user@unspecified.company"
@echo >>x509.genkey
@echo >>x509.genkey "[ myexts ]"
@echo >>x509.genkey "basicConstraints=critical,CA:FALSE"
ALU64_MOD_X:
if (unlikely(SRC == 0))
return 0;
- tmp = DST;
- DST = do_div(tmp, SRC);
+ div64_u64_rem(DST, SRC, &tmp);
+ DST = tmp;
CONT;
ALU_MOD_X:
if (unlikely(SRC == 0))
DST = do_div(tmp, (u32) SRC);
CONT;
ALU64_MOD_K:
- tmp = DST;
- DST = do_div(tmp, IMM);
+ div64_u64_rem(DST, IMM, &tmp);
+ DST = tmp;
CONT;
ALU_MOD_K:
tmp = (u32) DST;
ALU64_DIV_X:
if (unlikely(SRC == 0))
return 0;
- do_div(DST, SRC);
+ DST = div64_u64(DST, SRC);
CONT;
ALU_DIV_X:
if (unlikely(SRC == 0))
DST = (u32) tmp;
CONT;
ALU64_DIV_K:
- do_div(DST, IMM);
+ DST = div64_u64(DST, IMM);
CONT;
ALU_DIV_K:
tmp = (u32) DST;
.irq_ack = noop,
.irq_mask = noop,
.irq_unmask = noop,
+ .flags = IRQCHIP_SKIP_SET_WAKE,
};
EXPORT_SYMBOL_GPL(dummy_irq_chip);
do {
unsigned long pfn, epfn, addr, eaddr;
- pages = kimage_alloc_pages(GFP_KERNEL, order);
+ pages = kimage_alloc_pages(KEXEC_CONTROL_MEMORY_GFP, order);
if (!pages)
break;
pfn = page_to_pfn(pages);
static int kthread_prio = CONFIG_RCU_KTHREAD_PRIO;
module_param(kthread_prio, int, 0644);
-/* Delay in jiffies for grace-period initialization delays. */
-static int gp_init_delay = IS_ENABLED(CONFIG_RCU_TORTURE_TEST_SLOW_INIT)
- ? CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY
- : 0;
+/* Delay in jiffies for grace-period initialization delays, debug only. */
+#ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT
+static int gp_init_delay = CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY;
module_param(gp_init_delay, int, 0644);
+#else /* #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT */
+static const int gp_init_delay;
+#endif /* #else #ifdef CONFIG_RCU_TORTURE_TEST_SLOW_INIT */
+#define PER_RCU_NODE_PERIOD 10 /* Number of grace periods between delays. */
/*
* Track the rcutorture test sequence number and the update version
raw_spin_unlock_irq(&rnp->lock);
cond_resched_rcu_qs();
ACCESS_ONCE(rsp->gp_activity) = jiffies;
- if (IS_ENABLED(CONFIG_RCU_TORTURE_TEST_SLOW_INIT) &&
- gp_init_delay > 0 &&
- !(rsp->gpnum % (rcu_num_nodes * 10)))
+ if (gp_init_delay > 0 &&
+ !(rsp->gpnum % (rcu_num_nodes * PER_RCU_NODE_PERIOD)))
schedule_timeout_uninterruptible(gp_init_delay);
}
rq_clock_skip_update(rq, true);
}
-static ATOMIC_NOTIFIER_HEAD(task_migration_notifier);
-
-void register_task_migration_notifier(struct notifier_block *n)
-{
- atomic_notifier_chain_register(&task_migration_notifier, n);
-}
-
#ifdef CONFIG_SMP
void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
{
trace_sched_migrate_task(p, new_cpu);
if (task_cpu(p) != new_cpu) {
- struct task_migration_notifier tmn;
-
if (p->sched_class->migrate_task_rq)
p->sched_class->migrate_task_rq(p, new_cpu);
p->se.nr_migrations++;
perf_sw_event_sched(PERF_COUNT_SW_CPU_MIGRATIONS, 1, 0);
-
- tmn.task = p;
- tmn.from_cpu = task_cpu(p);
- tmn.to_cpu = new_cpu;
-
- atomic_notifier_call_chain(&task_migration_notifier, 0, &tmn);
}
__set_task_cpu(p, new_cpu);
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
int next_state, entered_state;
- unsigned int broadcast;
bool reflect;
/*
goto exit_idle;
}
- broadcast = drv->states[next_state].flags & CPUIDLE_FLAG_TIMER_STOP;
-
- /*
- * Tell the time framework to switch to a broadcast timer
- * because our local timer will be shutdown. If a local timer
- * is used from another cpu as a broadcast timer, this call may
- * fail if it is not available
- */
- if (broadcast && tick_broadcast_enter())
- goto use_default;
-
/* Take note of the planned idle state. */
idle_set_state(this_rq(), &drv->states[next_state]);
/* The cpu is no longer idle or about to enter idle. */
idle_set_state(this_rq(), NULL);
- if (broadcast)
- tick_broadcast_exit();
+ if (entered_state == -EBUSY)
+ goto use_default;
/*
* Give the governor an opportunity to reflect on the outcome
/* Transition with new state-specific callbacks */
switch (state) {
case CLOCK_EVT_STATE_DETACHED:
- /*
- * This is an internal state, which is guaranteed to go from
- * SHUTDOWN to DETACHED. No driver interaction required.
- */
- return 0;
+ /* The clockevent device is getting replaced. Shut it down. */
case CLOCK_EVT_STATE_SHUTDOWN:
return dev->set_state_shutdown(dev);
EXPORT_SYMBOL(ftrace_print_hex_seq);
const char *
-ftrace_print_array_seq(struct trace_seq *p, const void *buf, int buf_len,
+ftrace_print_array_seq(struct trace_seq *p, const void *buf, int count,
size_t el_size)
{
const char *ret = trace_seq_buffer_ptr(p);
const char *prefix = "";
void *ptr = (void *)buf;
+ size_t buf_len = count * el_size;
trace_seq_putc(p, '{');
int "How much to slow down RCU grace-period initialization"
range 0 5
default 3
+ depends on RCU_TORTURE_TEST_SLOW_INIT
help
This option specifies the number of jiffies to wait between
each rcu_node structure initialization.
help
Enables kernel address sanitizer - runtime memory debugger,
designed to find out-of-bounds accesses and use-after-free bugs.
- This is strictly debugging feature. It consumes about 1/8
- of available memory and brings about ~x3 performance slowdown.
+ This is strictly a debugging feature and it requires a gcc version
+ of 4.9.2 or later. Detection of out of bounds accesses to stack or
+ global variables requires gcc 5.0 or later.
+ This feature consumes about 1/8 of available memory and brings about
+ ~x3 performance slowdown.
For better error detection enable CONFIG_STACKTRACE,
and add slub_debug=U to boot cmdline.
memory accesses. This is faster than outline (in some workloads
it gives about x2 boost over outline instrumentation), but
make kernel's .text size much bigger.
+ This requires a gcc version of 5.0 or later.
endchoice
+++ /dev/null
-/* find_last_bit.c: fallback find next bit implementation
- *
- * Copyright (C) 2008 IBM Corporation
- * Written by Rusty Russell <rusty@rustcorp.com.au>
- * (Inspired by David Howell's find_next_bit implementation)
- *
- * Rewritten by Yury Norov <yury.norov@gmail.com> to decrease
- * size and improve performance, 2015.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/bitops.h>
-#include <linux/bitmap.h>
-#include <linux/export.h>
-#include <linux/kernel.h>
-
-#ifndef find_last_bit
-
-unsigned long find_last_bit(const unsigned long *addr, unsigned long size)
-{
- if (size) {
- unsigned long val = BITMAP_LAST_WORD_MASK(size);
- unsigned long idx = (size-1) / BITS_PER_LONG;
-
- do {
- val &= addr[idx];
- if (val)
- return idx * BITS_PER_LONG + __fls(val);
-
- val = ~0ul;
- } while (idx--);
- }
- return size;
-}
-EXPORT_SYMBOL(find_last_bit);
-
-#endif
if (rht_grow_above_75(ht, tbl))
size *= 2;
- /* More than two rehashes (not resizes) detected. */
- else if (WARN_ON(old_tbl != tbl && old_tbl->size == size))
+ /* Do not schedule more than one rehash */
+ else if (old_tbl != tbl)
return -EBUSY;
new_tbl = bucket_table_alloc(ht, size, GFP_ATOMIC);
- if (new_tbl == NULL)
+ if (new_tbl == NULL) {
+ /* Schedule async resize/rehash to try allocation
+ * non-atomic context.
+ */
+ schedule_work(&ht->run_work);
return -ENOMEM;
+ }
err = rhashtable_rehash_attach(ht, tbl, new_tbl);
if (err) {
void memzero_explicit(void *s, size_t count)
{
memset(s, 0, count);
- barrier();
+ barrier_data(s);
}
EXPORT_SYMBOL(memzero_explicit);
if (!hwpoison_filter_enable)
goto inject;
- if (!PageLRU(p) && !PageHuge(p))
- shake_page(p, 0);
+ if (!PageLRU(hpage) && !PageHuge(p))
+ shake_page(hpage, 0);
/*
* This implies unable to support non-LRU pages.
*/
- if (!PageLRU(p) && !PageHuge(p))
- return 0;
+ if (!PageLRU(hpage) && !PageHuge(p))
+ goto put_out;
/*
* do a racy check with elevated page count, to make sure PG_hwpoison
err = hwpoison_filter(hpage);
unlock_page(hpage);
if (err)
- return 0;
+ goto put_out;
inject:
pr_info("Injecting memory failure at pfn %#lx\n", pfn);
return memory_failure(pfn, 18, MF_COUNT_INCREASED);
+put_out:
+ put_page(hpage);
+ return 0;
}
static int hwpoison_unpoison(void *data, u64 val)
* The check (unnecessarily) ignores LRU pages being isolated and
* walked by the page reclaim code, however that's not a big loss.
*/
- if (!PageHuge(p) && !PageTransTail(p)) {
- if (!PageLRU(p))
- shake_page(p, 0);
- if (!PageLRU(p)) {
+ if (!PageHuge(p)) {
+ if (!PageLRU(hpage))
+ shake_page(hpage, 0);
+ if (!PageLRU(hpage)) {
/*
* shake_page could have turned it free.
*/
} else if (ret == 0) { /* for free pages */
if (PageHuge(page)) {
set_page_hwpoison_huge_page(hpage);
- dequeue_hwpoisoned_huge_page(hpage);
- atomic_long_add(1 << compound_order(hpage),
+ if (!dequeue_hwpoisoned_huge_page(hpage))
+ atomic_long_add(1 << compound_order(hpage),
&num_poisoned_pages);
} else {
- SetPageHWPoison(page);
- atomic_long_inc(&num_poisoned_pages);
+ if (!TestSetPageHWPoison(page))
+ atomic_long_inc(&num_poisoned_pages);
}
}
unset_migratetype_isolate(page, MIGRATE_MOVABLE);
long x;
x = div64_s64(((s64)setpoint - (s64)dirty) << RATELIMIT_CALC_SHIFT,
- limit - setpoint + 1);
+ (limit - setpoint) | 1);
pos_ratio = x;
pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
pos_ratio = pos_ratio * x >> RATELIMIT_CALC_SHIFT;
* scale global setpoint to bdi's:
* bdi_setpoint = setpoint * bdi_thresh / thresh
*/
- x = div_u64((u64)bdi_thresh << 16, thresh + 1);
+ x = div_u64((u64)bdi_thresh << 16, thresh | 1);
bdi_setpoint = setpoint * (u64)x >> 16;
/*
* Use span=(8*write_bw) in single bdi case as indicated by
if (bdi_dirty < x_intercept - span / 4) {
pos_ratio = div64_u64(pos_ratio * (x_intercept - bdi_dirty),
- x_intercept - bdi_setpoint + 1);
+ (x_intercept - bdi_setpoint) | 1);
} else
pos_ratio /= 4;
struct br_port_msg *bpm;
struct nlattr *nest, *nest2;
- nlh = nlmsg_put(skb, pid, seq, type, sizeof(*bpm), NLM_F_MULTI);
+ nlh = nlmsg_put(skb, pid, seq, type, sizeof(*bpm), 0);
if (!nlh)
return -EMSGSIZE;
* Dump information about all ports, in response to GETLINK
*/
int br_getlink(struct sk_buff *skb, u32 pid, u32 seq,
- struct net_device *dev, u32 filter_mask)
+ struct net_device *dev, u32 filter_mask, int nlflags)
{
struct net_bridge_port *port = br_port_get_rtnl(dev);
!(filter_mask & RTEXT_FILTER_BRVLAN_COMPRESSED))
return 0;
- return br_fill_ifinfo(skb, port, pid, seq, RTM_NEWLINK, NLM_F_MULTI,
+ return br_fill_ifinfo(skb, port, pid, seq, RTM_NEWLINK, nlflags,
filter_mask, dev);
}
int br_setlink(struct net_device *dev, struct nlmsghdr *nlmsg, u16 flags);
int br_dellink(struct net_device *dev, struct nlmsghdr *nlmsg, u16 flags);
int br_getlink(struct sk_buff *skb, u32 pid, u32 seq, struct net_device *dev,
- u32 filter_mask);
+ u32 filter_mask, int nlflags);
#ifdef CONFIG_SYSFS
/* br_sysfs_if.c */
set_rps_cpu(struct net_device *dev, struct sk_buff *skb,
struct rps_dev_flow *rflow, u16 next_cpu)
{
- if (next_cpu != RPS_NO_CPU) {
+ if (next_cpu < nr_cpu_ids) {
#ifdef CONFIG_RFS_ACCEL
struct netdev_rx_queue *rxqueue;
struct rps_dev_flow_table *flow_table;
* If the desired CPU (where last recvmsg was done) is
* different from current CPU (one in the rx-queue flow
* table entry), switch if one of the following holds:
- * - Current CPU is unset (equal to RPS_NO_CPU).
+ * - Current CPU is unset (>= nr_cpu_ids).
* - Current CPU is offline.
* - The current CPU's queue tail has advanced beyond the
* last packet that was enqueued using this table entry.
* have been dequeued, thus preserving in order delivery.
*/
if (unlikely(tcpu != next_cpu) &&
- (tcpu == RPS_NO_CPU || !cpu_online(tcpu) ||
+ (tcpu >= nr_cpu_ids || !cpu_online(tcpu) ||
((int)(per_cpu(softnet_data, tcpu).input_queue_head -
rflow->last_qtail)) >= 0)) {
tcpu = next_cpu;
rflow = set_rps_cpu(dev, skb, rflow, next_cpu);
}
- if (tcpu != RPS_NO_CPU && cpu_online(tcpu)) {
+ if (tcpu < nr_cpu_ids && cpu_online(tcpu)) {
*rflowp = rflow;
cpu = tcpu;
goto done;
struct rps_dev_flow_table *flow_table;
struct rps_dev_flow *rflow;
bool expire = true;
- int cpu;
+ unsigned int cpu;
rcu_read_lock();
flow_table = rcu_dereference(rxqueue->rps_flow_table);
if (flow_table && flow_id <= flow_table->mask) {
rflow = &flow_table->flows[flow_id];
cpu = ACCESS_ONCE(rflow->cpu);
- if (rflow->filter == filter_id && cpu != RPS_NO_CPU &&
+ if (rflow->filter == filter_id && cpu < nr_cpu_ids &&
((int)(per_cpu(softnet_data, cpu).input_queue_head -
rflow->last_qtail) <
(int)(10 * flow_table->mask)))
int ndo_dflt_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
struct net_device *dev, u16 mode,
- u32 flags, u32 mask)
+ u32 flags, u32 mask, int nlflags)
{
struct nlmsghdr *nlh;
struct ifinfomsg *ifm;
u8 operstate = netif_running(dev) ? dev->operstate : IF_OPER_DOWN;
struct net_device *br_dev = netdev_master_upper_dev_get(dev);
- nlh = nlmsg_put(skb, pid, seq, RTM_NEWLINK, sizeof(*ifm), NLM_F_MULTI);
+ nlh = nlmsg_put(skb, pid, seq, RTM_NEWLINK, sizeof(*ifm), nlflags);
if (nlh == NULL)
return -EMSGSIZE;
if (br_dev && br_dev->netdev_ops->ndo_bridge_getlink) {
if (idx >= cb->args[0] &&
br_dev->netdev_ops->ndo_bridge_getlink(
- skb, portid, seq, dev, filter_mask) < 0)
+ skb, portid, seq, dev, filter_mask,
+ NLM_F_MULTI) < 0)
break;
idx++;
}
if (ops->ndo_bridge_getlink) {
if (idx >= cb->args[0] &&
ops->ndo_bridge_getlink(skb, portid, seq, dev,
- filter_mask) < 0)
+ filter_mask,
+ NLM_F_MULTI) < 0)
break;
idx++;
}
goto errout;
}
- err = dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev, 0);
+ err = dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev, 0, 0);
if (err < 0)
goto errout;
EXPORT_SYMBOL(__alloc_skb);
/**
- * build_skb - build a network buffer
+ * __build_skb - build a network buffer
* @data: data buffer provided by caller
- * @frag_size: size of fragment, or 0 if head was kmalloced
+ * @frag_size: size of data, or 0 if head was kmalloced
*
* Allocate a new &sk_buff. Caller provides space holding head and
* skb_shared_info. @data must have been allocated by kmalloc() only if
- * @frag_size is 0, otherwise data should come from the page allocator.
+ * @frag_size is 0, otherwise data should come from the page allocator
+ * or vmalloc()
* The return is the new skb buffer.
* On a failure the return is %NULL, and @data is not freed.
* Notes :
* before giving packet to stack.
* RX rings only contains data buffers, not full skbs.
*/
-struct sk_buff *build_skb(void *data, unsigned int frag_size)
+struct sk_buff *__build_skb(void *data, unsigned int frag_size)
{
struct skb_shared_info *shinfo;
struct sk_buff *skb;
memset(skb, 0, offsetof(struct sk_buff, tail));
skb->truesize = SKB_TRUESIZE(size);
- skb->head_frag = frag_size != 0;
atomic_set(&skb->users, 1);
skb->head = data;
skb->data = data;
return skb;
}
+
+/* build_skb() is wrapper over __build_skb(), that specifically
+ * takes care of skb->head and skb->pfmemalloc
+ * This means that if @frag_size is not zero, then @data must be backed
+ * by a page fragment, not kmalloc() or vmalloc()
+ */
+struct sk_buff *build_skb(void *data, unsigned int frag_size)
+{
+ struct sk_buff *skb = __build_skb(data, frag_size);
+
+ if (skb && frag_size) {
+ skb->head_frag = 1;
+ if (virt_to_head_page(data)->pfmemalloc)
+ skb->pfmemalloc = 1;
+ }
+ return skb;
+}
EXPORT_SYMBOL(build_skb);
struct netdev_alloc_cache {
gfp_t gfp = gfp_mask;
if (order) {
- gfp_mask |= __GFP_COMP | __GFP_NOWARN | __GFP_NORETRY;
+ gfp_mask |= __GFP_COMP | __GFP_NOWARN | __GFP_NORETRY |
+ __GFP_NOMEMALLOC;
page = alloc_pages_node(NUMA_NO_NODE, gfp_mask, order);
nc->frag.size = PAGE_SIZE << (page ? order : 0);
}
iph->saddr, iph->daddr);
if (req) {
nsk = dccp_check_req(sk, skb, req);
- reqsk_put(req);
+ if (!nsk)
+ reqsk_put(req);
return nsk;
}
nsk = inet_lookup_established(sock_net(sk), &dccp_hashinfo,
&iph->daddr, inet6_iif(skb));
if (req) {
nsk = dccp_check_req(sk, skb, req);
- reqsk_put(req);
+ if (!nsk)
+ reqsk_put(req);
return nsk;
}
nsk = __inet6_lookup_established(sock_net(sk), &dccp_hashinfo,
if (child == NULL)
goto listen_overflow;
- inet_csk_reqsk_queue_unlink(sk, req);
- inet_csk_reqsk_queue_removed(sk, req);
+ inet_csk_reqsk_queue_drop(sk, req);
inet_csk_reqsk_queue_add(sk, req, child);
out:
return child;
if (cd->sw_addr > PHY_MAX_ADDR)
continue;
- if (!of_property_read_u32(np, "eeprom-length", &eeprom_len))
+ if (!of_property_read_u32(child, "eeprom-length", &eeprom_len))
cd->eeprom_len = eeprom_len;
for_each_available_child_of_node(child, port) {
}
EXPORT_SYMBOL(inet_rtx_syn_ack);
+/* return true if req was found in the syn_table[] */
+static bool reqsk_queue_unlink(struct request_sock_queue *queue,
+ struct request_sock *req)
+{
+ struct listen_sock *lopt = queue->listen_opt;
+ struct request_sock **prev;
+ bool found = false;
+
+ spin_lock(&queue->syn_wait_lock);
+
+ for (prev = &lopt->syn_table[req->rsk_hash]; *prev != NULL;
+ prev = &(*prev)->dl_next) {
+ if (*prev == req) {
+ *prev = req->dl_next;
+ found = true;
+ break;
+ }
+ }
+
+ spin_unlock(&queue->syn_wait_lock);
+ if (del_timer(&req->rsk_timer))
+ reqsk_put(req);
+ return found;
+}
+
+void inet_csk_reqsk_queue_drop(struct sock *sk, struct request_sock *req)
+{
+ if (reqsk_queue_unlink(&inet_csk(sk)->icsk_accept_queue, req)) {
+ reqsk_queue_removed(&inet_csk(sk)->icsk_accept_queue, req);
+ reqsk_put(req);
+ }
+}
+EXPORT_SYMBOL(inet_csk_reqsk_queue_drop);
+
static void reqsk_timer_handler(unsigned long data)
{
struct request_sock *req = (struct request_sock *)data;
if (sk_hashed(sk)) {
write_lock_bh(&ping_table.lock);
hlist_nulls_del(&sk->sk_nulls_node);
+ sk_nulls_node_init(&sk->sk_nulls_node);
sock_put(sk);
isk->inet_num = 0;
isk->inet_sport = 0;
if (dst_metric_locked(dst, RTAX_MTU))
return;
- if (dst->dev->mtu < mtu)
- return;
-
- if (rt->rt_pmtu && rt->rt_pmtu < mtu)
+ if (ipv4_mtu(dst) < mtu)
return;
if (mtu < ip_rt_min_pmtu)
req = inet_csk_search_req(sk, th->source, iph->saddr, iph->daddr);
if (req) {
nsk = tcp_check_req(sk, skb, req, false);
- reqsk_put(req);
+ if (!nsk)
+ reqsk_put(req);
return nsk;
}
if (!child)
goto listen_overflow;
- inet_csk_reqsk_queue_unlink(sk, req);
- inet_csk_reqsk_queue_removed(sk, req);
-
+ inet_csk_reqsk_queue_drop(sk, req);
inet_csk_reqsk_queue_add(sk, req, child);
+ /* Warning: caller must not call reqsk_put(req);
+ * child stole last reference on it.
+ */
return child;
listen_overflow:
}
}
-/* Send a fin. The caller locks the socket for us. This cannot be
- * allowed to fail queueing a FIN frame under any circumstances.
+/* We allow to exceed memory limits for FIN packets to expedite
+ * connection tear down and (memory) recovery.
+ * Otherwise tcp_send_fin() could be tempted to either delay FIN
+ * or even be forced to close flow without any FIN.
+ */
+static void sk_forced_wmem_schedule(struct sock *sk, int size)
+{
+ int amt, status;
+
+ if (size <= sk->sk_forward_alloc)
+ return;
+ amt = sk_mem_pages(size);
+ sk->sk_forward_alloc += amt * SK_MEM_QUANTUM;
+ sk_memory_allocated_add(sk, amt, &status);
+}
+
+/* Send a FIN. The caller locks the socket for us.
+ * We should try to send a FIN packet really hard, but eventually give up.
*/
void tcp_send_fin(struct sock *sk)
{
+ struct sk_buff *skb, *tskb = tcp_write_queue_tail(sk);
struct tcp_sock *tp = tcp_sk(sk);
- struct sk_buff *skb = tcp_write_queue_tail(sk);
- int mss_now;
- /* Optimization, tack on the FIN if we have a queue of
- * unsent frames. But be careful about outgoing SACKS
- * and IP options.
+ /* Optimization, tack on the FIN if we have one skb in write queue and
+ * this skb was not yet sent, or we are under memory pressure.
+ * Note: in the latter case, FIN packet will be sent after a timeout,
+ * as TCP stack thinks it has already been transmitted.
*/
- mss_now = tcp_current_mss(sk);
-
- if (tcp_send_head(sk)) {
- TCP_SKB_CB(skb)->tcp_flags |= TCPHDR_FIN;
- TCP_SKB_CB(skb)->end_seq++;
+ if (tskb && (tcp_send_head(sk) || sk_under_memory_pressure(sk))) {
+coalesce:
+ TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN;
+ TCP_SKB_CB(tskb)->end_seq++;
tp->write_seq++;
+ if (!tcp_send_head(sk)) {
+ /* This means tskb was already sent.
+ * Pretend we included the FIN on previous transmit.
+ * We need to set tp->snd_nxt to the value it would have
+ * if FIN had been sent. This is because retransmit path
+ * does not change tp->snd_nxt.
+ */
+ tp->snd_nxt++;
+ return;
+ }
} else {
- /* Socket is locked, keep trying until memory is available. */
- for (;;) {
- skb = sk_stream_alloc_skb(sk, 0, sk->sk_allocation);
- if (skb)
- break;
- yield();
+ skb = alloc_skb_fclone(MAX_TCP_HEADER, sk->sk_allocation);
+ if (unlikely(!skb)) {
+ if (tskb)
+ goto coalesce;
+ return;
}
+ skb_reserve(skb, MAX_TCP_HEADER);
+ sk_forced_wmem_schedule(sk, skb->truesize);
/* FIN eats a sequence byte, write_seq advanced by tcp_queue_skb(). */
tcp_init_nondata_skb(skb, tp->write_seq,
TCPHDR_ACK | TCPHDR_FIN);
tcp_queue_skb(sk, skb);
}
- __tcp_push_pending_frames(sk, mss_now, TCP_NAGLE_OFF);
+ __tcp_push_pending_frames(sk, tcp_current_mss(sk), TCP_NAGLE_OFF);
}
/* We get here when a process closes a file descriptor (either due to
static int ip6gre_tunnel_init(struct net_device *dev)
{
struct ip6_tnl *tunnel;
- int i;
tunnel = netdev_priv(dev);
if (ipv6_addr_any(&tunnel->parms.raddr))
dev->header_ops = &ip6gre_header_ops;
- dev->tstats = alloc_percpu(struct pcpu_sw_netstats);
+ dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!dev->tstats)
return -ENOMEM;
- for_each_possible_cpu(i) {
- struct pcpu_sw_netstats *ip6gre_tunnel_stats;
- ip6gre_tunnel_stats = per_cpu_ptr(dev->tstats, i);
- u64_stats_init(&ip6gre_tunnel_stats->syncp);
- }
-
return 0;
}
&ipv6_hdr(skb)->daddr, tcp_v6_iif(skb));
if (req) {
nsk = tcp_check_req(sk, skb, req, false);
- reqsk_put(req);
+ if (!nsk)
+ reqsk_put(req);
return nsk;
}
nsk = __inet6_lookup_established(sock_net(sk), &tcp_hashinfo,
return rt;
}
+static inline struct mpls_dev *mpls_dev_get(const struct net_device *dev)
+{
+ return rcu_dereference_rtnl(dev->mpls_ptr);
+}
+
static bool mpls_output_possible(const struct net_device *dev)
{
return dev && (dev->flags & IFF_UP) && netif_carrier_ok(dev);
struct mpls_route *rt;
struct mpls_entry_decoded dec;
struct net_device *out_dev;
+ struct mpls_dev *mdev;
unsigned int hh_len;
unsigned int new_header_size;
unsigned int mtu;
/* Careful this entire function runs inside of an rcu critical section */
+ mdev = mpls_dev_get(dev);
+ if (!mdev || !mdev->input_enabled)
+ goto drop;
+
if (skb->pkt_type != PACKET_HOST)
goto drop;
if (!dev)
goto errout;
- /* For now just support ethernet devices */
+ /* Ensure this is a supported device */
err = -EINVAL;
- if ((dev->type != ARPHRD_ETHER) && (dev->type != ARPHRD_LOOPBACK))
+ if (!mpls_dev_get(dev))
goto errout;
err = -EINVAL;
return err;
}
+#define MPLS_PERDEV_SYSCTL_OFFSET(field) \
+ (&((struct mpls_dev *)0)->field)
+
+static const struct ctl_table mpls_dev_table[] = {
+ {
+ .procname = "input",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ .data = MPLS_PERDEV_SYSCTL_OFFSET(input_enabled),
+ },
+ { }
+};
+
+static int mpls_dev_sysctl_register(struct net_device *dev,
+ struct mpls_dev *mdev)
+{
+ char path[sizeof("net/mpls/conf/") + IFNAMSIZ];
+ struct ctl_table *table;
+ int i;
+
+ table = kmemdup(&mpls_dev_table, sizeof(mpls_dev_table), GFP_KERNEL);
+ if (!table)
+ goto out;
+
+ /* Table data contains only offsets relative to the base of
+ * the mdev at this point, so make them absolute.
+ */
+ for (i = 0; i < ARRAY_SIZE(mpls_dev_table); i++)
+ table[i].data = (char *)mdev + (uintptr_t)table[i].data;
+
+ snprintf(path, sizeof(path), "net/mpls/conf/%s", dev->name);
+
+ mdev->sysctl = register_net_sysctl(dev_net(dev), path, table);
+ if (!mdev->sysctl)
+ goto free;
+
+ return 0;
+
+free:
+ kfree(table);
+out:
+ return -ENOBUFS;
+}
+
+static void mpls_dev_sysctl_unregister(struct mpls_dev *mdev)
+{
+ struct ctl_table *table;
+
+ table = mdev->sysctl->ctl_table_arg;
+ unregister_net_sysctl_table(mdev->sysctl);
+ kfree(table);
+}
+
+static struct mpls_dev *mpls_add_dev(struct net_device *dev)
+{
+ struct mpls_dev *mdev;
+ int err = -ENOMEM;
+
+ ASSERT_RTNL();
+
+ mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
+ if (!mdev)
+ return ERR_PTR(err);
+
+ err = mpls_dev_sysctl_register(dev, mdev);
+ if (err)
+ goto free;
+
+ rcu_assign_pointer(dev->mpls_ptr, mdev);
+
+ return mdev;
+
+free:
+ kfree(mdev);
+ return ERR_PTR(err);
+}
+
static void mpls_ifdown(struct net_device *dev)
{
struct mpls_route __rcu **platform_label;
struct net *net = dev_net(dev);
+ struct mpls_dev *mdev;
unsigned index;
platform_label = rtnl_dereference(net->mpls.platform_label);
continue;
rt->rt_dev = NULL;
}
+
+ mdev = mpls_dev_get(dev);
+ if (!mdev)
+ return;
+
+ mpls_dev_sysctl_unregister(mdev);
+
+ RCU_INIT_POINTER(dev->mpls_ptr, NULL);
+
+ kfree(mdev);
}
static int mpls_dev_notify(struct notifier_block *this, unsigned long event,
void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+ struct mpls_dev *mdev;
switch(event) {
+ case NETDEV_REGISTER:
+ /* For now just support ethernet devices */
+ if ((dev->type == ARPHRD_ETHER) ||
+ (dev->type == ARPHRD_LOOPBACK)) {
+ mdev = mpls_add_dev(dev);
+ if (IS_ERR(mdev))
+ return notifier_from_errno(PTR_ERR(mdev));
+ }
+ break;
+
case NETDEV_UNREGISTER:
mpls_ifdown(dev);
break;
if ((dec.bos != bos) || dec.ttl || dec.tc)
return -EINVAL;
+ switch (dec.label) {
+ case LABEL_IMPLICIT_NULL:
+ /* RFC3032: This is a label that an LSR may
+ * assign and distribute, but which never
+ * actually appears in the encapsulation.
+ */
+ return -EINVAL;
+ }
+
label[i] = dec.label;
}
*labels = nla_labels;
return ret;
}
-static struct ctl_table mpls_table[] = {
+static const struct ctl_table mpls_table[] = {
{
.procname = "platform_labels",
.data = NULL,
u8 bos;
};
+struct mpls_dev {
+ int input_enabled;
+
+ struct ctl_table_header *sysctl;
+};
+
struct sk_buff;
static inline struct mpls_shim_hdr *mpls_hdr(const struct sk_buff *skb)
case NFT_CONTINUE:
case NFT_BREAK:
case NFT_RETURN:
- desc->len = sizeof(data->verdict);
break;
case NFT_JUMP:
case NFT_GOTO:
chain->use++;
data->verdict.chain = chain;
- desc->len = sizeof(data);
break;
}
+ desc->len = sizeof(data->verdict);
desc->type = NFT_DATA_VERDICT;
return 0;
}
if (nla_put_u8(skb, NFTA_REJECT_ICMP_CODE, priv->icmp_code))
goto nla_put_failure;
break;
+ default:
+ break;
}
return 0;
if (nla_put_u8(skb, NFTA_REJECT_ICMP_CODE, priv->icmp_code))
goto nla_put_failure;
break;
+ default:
+ break;
}
return 0;
if (data == NULL)
return NULL;
- skb = build_skb(data, size);
+ skb = __build_skb(data, size);
if (skb == NULL)
vfree(data);
- else {
- skb->head_frag = 0;
+ else
skb->destructor = netlink_skb_destructor;
- }
return skb;
}
skb->mark = c->mark;
/* using overlimits stats to count how many packets marked */
ca->tcf_qstats.overlimits++;
- nf_ct_put(c);
goto out;
}
nf_ct_put(c);
out:
- skb->nfct = NULL;
spin_unlock(&ca->tcf_lock);
return ca->tcf_action;
}
/* Caller should hold rtnl_lock to protect the bearer */
static int __tipc_nl_add_bearer(struct tipc_nl_msg *msg,
- struct tipc_bearer *bearer)
+ struct tipc_bearer *bearer, int nlflags)
{
void *hdr;
struct nlattr *attrs;
struct nlattr *prop;
hdr = genlmsg_put(msg->skb, msg->portid, msg->seq, &tipc_genl_family,
- NLM_F_MULTI, TIPC_NL_BEARER_GET);
+ nlflags, TIPC_NL_BEARER_GET);
if (!hdr)
return -EMSGSIZE;
if (!bearer)
continue;
- err = __tipc_nl_add_bearer(&msg, bearer);
+ err = __tipc_nl_add_bearer(&msg, bearer, NLM_F_MULTI);
if (err)
break;
}
goto err_out;
}
- err = __tipc_nl_add_bearer(&msg, bearer);
+ err = __tipc_nl_add_bearer(&msg, bearer, 0);
if (err)
goto err_out;
rtnl_unlock();
}
static int __tipc_nl_add_media(struct tipc_nl_msg *msg,
- struct tipc_media *media)
+ struct tipc_media *media, int nlflags)
{
void *hdr;
struct nlattr *attrs;
struct nlattr *prop;
hdr = genlmsg_put(msg->skb, msg->portid, msg->seq, &tipc_genl_family,
- NLM_F_MULTI, TIPC_NL_MEDIA_GET);
+ nlflags, TIPC_NL_MEDIA_GET);
if (!hdr)
return -EMSGSIZE;
rtnl_lock();
for (; media_info_array[i] != NULL; i++) {
- err = __tipc_nl_add_media(&msg, media_info_array[i]);
+ err = __tipc_nl_add_media(&msg, media_info_array[i],
+ NLM_F_MULTI);
if (err)
break;
}
goto err_out;
}
- err = __tipc_nl_add_media(&msg, media);
+ err = __tipc_nl_add_media(&msg, media, 0);
if (err)
goto err_out;
rtnl_unlock();
}
/* Synchronize with parallel link if applicable */
if (unlikely((l_ptr->flags & LINK_SYNCHING) && !msg_dup(msg))) {
- link_handle_out_of_seq_msg(l_ptr, skb);
- if (link_synch(l_ptr))
- link_retrieve_defq(l_ptr, &head);
- skb = NULL;
- goto unlock;
+ if (!link_synch(l_ptr))
+ goto unlock;
}
l_ptr->next_in_no++;
if (unlikely(!skb_queue_empty(&l_ptr->deferdq)))
/* Caller should hold appropriate locks to protect the link */
static int __tipc_nl_add_link(struct net *net, struct tipc_nl_msg *msg,
- struct tipc_link *link)
+ struct tipc_link *link, int nlflags)
{
int err;
void *hdr;
struct tipc_net *tn = net_generic(net, tipc_net_id);
hdr = genlmsg_put(msg->skb, msg->portid, msg->seq, &tipc_genl_family,
- NLM_F_MULTI, TIPC_NL_LINK_GET);
+ nlflags, TIPC_NL_LINK_GET);
if (!hdr)
return -EMSGSIZE;
if (!node->links[i])
continue;
- err = __tipc_nl_add_link(net, msg, node->links[i]);
+ err = __tipc_nl_add_link(net, msg, node->links[i], NLM_F_MULTI);
if (err)
return err;
}
err = __tipc_nl_add_node_links(net, &msg, node,
&prev_link);
tipc_node_unlock(node);
- tipc_node_put(node);
if (err)
goto out;
goto err_out;
}
- err = __tipc_nl_add_link(net, &msg, link);
+ err = __tipc_nl_add_link(net, &msg, link, 0);
if (err)
goto err_out;
}
saddr->scope = -TIPC_NODE_SCOPE;
kernel_bind(sock, (struct sockaddr *)saddr, sizeof(*saddr));
- sk_release_kernel(sk);
+ sock_release(sock);
con->sock = NULL;
}
struct socket *sock = NULL;
int ret;
- ret = sock_create_kern(AF_TIPC, SOCK_SEQPACKET, 0, &sock);
+ ret = __sock_create(s->net, AF_TIPC, SOCK_SEQPACKET, 0, &sock, 1);
if (ret < 0)
return NULL;
-
- sk_change_net(sock->sk, s->net);
-
ret = kernel_setsockopt(sock, SOL_TIPC, TIPC_IMPORTANCE,
(char *)&s->imp, sizeof(s->imp));
if (ret < 0)
create_err:
kernel_sock_shutdown(sock, SHUT_RDWR);
- sk_release_kernel(sock->sk);
+ sock_release(sock);
return NULL;
}
int tipc_sk_rcv(struct net *net, struct sk_buff_head *inputq)
{
u32 dnode, dport = 0;
- int err = -TIPC_ERR_NO_PORT;
+ int err;
struct sk_buff *skb;
struct tipc_sock *tsk;
struct tipc_net *tn;
struct sock *sk;
while (skb_queue_len(inputq)) {
+ err = -TIPC_ERR_NO_PORT;
skb = NULL;
dport = tipc_skb_peek_port(inputq, dport);
tsk = tipc_sk_lookup(net, dport);
unsigned int unix_tot_inflight;
-
struct sock *unix_get_socket(struct file *filp)
{
struct sock *u_sock = NULL;
struct inode *inode = file_inode(filp);
- /*
- * Socket ?
- */
+ /* Socket ? */
if (S_ISSOCK(inode->i_mode) && !(filp->f_mode & FMODE_PATH)) {
struct socket *sock = SOCKET_I(inode);
struct sock *s = sock->sk;
- /*
- * PF_UNIX ?
- */
+ /* PF_UNIX ? */
if (s && sock->ops && sock->ops->family == PF_UNIX)
u_sock = s;
}
return u_sock;
}
-/*
- * Keep the number of times in flight count for the file
- * descriptor if it is for an AF_UNIX socket.
+/* Keep the number of times in flight count for the file
+ * descriptor if it is for an AF_UNIX socket.
*/
void unix_inflight(struct file *fp)
{
struct sock *s = unix_get_socket(fp);
+
if (s) {
struct unix_sock *u = unix_sk(s);
+
spin_lock(&unix_gc_lock);
+
if (atomic_long_inc_return(&u->inflight) == 1) {
BUG_ON(!list_empty(&u->link));
list_add_tail(&u->link, &gc_inflight_list);
void unix_notinflight(struct file *fp)
{
struct sock *s = unix_get_socket(fp);
+
if (s) {
struct unix_sock *u = unix_sk(s);
+
spin_lock(&unix_gc_lock);
BUG_ON(list_empty(&u->link));
+
if (atomic_long_dec_and_test(&u->inflight))
list_del_init(&u->link);
unix_tot_inflight--;
spin_lock(&x->sk_receive_queue.lock);
skb_queue_walk_safe(&x->sk_receive_queue, skb, next) {
- /*
- * Do we have file descriptors ?
- */
+ /* Do we have file descriptors ? */
if (UNIXCB(skb).fp) {
bool hit = false;
- /*
- * Process the descriptors of this socket
- */
+ /* Process the descriptors of this socket */
int nfd = UNIXCB(skb).fp->count;
struct file **fp = UNIXCB(skb).fp->fp;
+
while (nfd--) {
- /*
- * Get the socket the fd matches
- * if it indeed does so
- */
+ /* Get the socket the fd matches if it indeed does so */
struct sock *sk = unix_get_socket(*fp++);
+
if (sk) {
struct unix_sock *u = unix_sk(sk);
- /*
- * Ignore non-candidates, they could
+ /* Ignore non-candidates, they could
* have been added to the queues after
* starting the garbage collection
*/
if (test_bit(UNIX_GC_CANDIDATE, &u->gc_flags)) {
hit = true;
+
func(u);
}
}
static void scan_children(struct sock *x, void (*func)(struct unix_sock *),
struct sk_buff_head *hitlist)
{
- if (x->sk_state != TCP_LISTEN)
+ if (x->sk_state != TCP_LISTEN) {
scan_inflight(x, func, hitlist);
- else {
+ } else {
struct sk_buff *skb;
struct sk_buff *next;
struct unix_sock *u;
LIST_HEAD(embryos);
- /*
- * For a listening socket collect the queued embryos
+ /* For a listening socket collect the queued embryos
* and perform a scan on them as well.
*/
spin_lock(&x->sk_receive_queue.lock);
skb_queue_walk_safe(&x->sk_receive_queue, skb, next) {
u = unix_sk(skb->sk);
- /*
- * An embryo cannot be in-flight, so it's safe
+ /* An embryo cannot be in-flight, so it's safe
* to use the list link.
*/
BUG_ON(!list_empty(&u->link));
static void inc_inflight_move_tail(struct unix_sock *u)
{
atomic_long_inc(&u->inflight);
- /*
- * If this still might be part of a cycle, move it to the end
+ /* If this still might be part of a cycle, move it to the end
* of the list, so that it's checked even if it was already
* passed over
*/
void wait_for_unix_gc(void)
{
- /*
- * If number of inflight sockets is insane,
+ /* If number of inflight sockets is insane,
* force a garbage collect right now.
*/
if (unix_tot_inflight > UNIX_INFLIGHT_TRIGGER_GC && !gc_in_progress)
goto out;
gc_in_progress = true;
- /*
- * First, select candidates for garbage collection. Only
+ /* First, select candidates for garbage collection. Only
* in-flight sockets are considered, and from those only ones
* which don't have any external reference.
*
}
}
- /*
- * Now remove all internal in-flight reference to children of
+ /* Now remove all internal in-flight reference to children of
* the candidates.
*/
list_for_each_entry(u, &gc_candidates, link)
scan_children(&u->sk, dec_inflight, NULL);
- /*
- * Restore the references for children of all candidates,
+ /* Restore the references for children of all candidates,
* which have remaining references. Do this recursively, so
* only those remain, which form cyclic references.
*
}
list_del(&cursor);
- /*
- * not_cycle_list contains those sockets which do not make up a
+ /* not_cycle_list contains those sockets which do not make up a
* cycle. Restore these to the inflight list.
*/
while (!list_empty(¬_cycle_list)) {
list_move_tail(&u->link, &gc_inflight_list);
}
- /*
- * Now gc_candidates contains only garbage. Restore original
+ /* Now gc_candidates contains only garbage. Restore original
* inflight counters for these as well, and remove the skbuffs
* which are creating the cycle(s).
*/
}
#endif
- strcpy(card->driver, emu->card_capabilities->driver);
- strcpy(card->shortname, emu->card_capabilities->name);
+ strlcpy(card->driver, emu->card_capabilities->driver,
+ sizeof(card->driver));
+ strlcpy(card->shortname, emu->card_capabilities->name,
+ sizeof(card->shortname));
snprintf(card->longname, sizeof(card->longname),
"%s (rev.%d, serial:0x%x) at 0x%lx, irq %i",
card->shortname, emu->revision, emu->serial, emu->port, emu->irq);
snd_emu10k1_ptr_write(hw, Z2, ch, 0);
/* invalidate maps */
- temp = (hw->silent_page.addr << 1) | MAP_PTI_MASK;
+ temp = (hw->silent_page.addr << hw->address_mode) | (hw->address_mode ? MAP_PTI_MASK1 : MAP_PTI_MASK0);
snd_emu10k1_ptr_write(hw, MAPA, ch, temp);
snd_emu10k1_ptr_write(hw, MAPB, ch, temp);
#if 0
snd_emu10k1_ptr_write(hw, CDF, ch, sample);
/* invalidate maps */
- temp = ((unsigned int)hw->silent_page.addr << 1) | MAP_PTI_MASK;
+ temp = ((unsigned int)hw->silent_page.addr << hw_address_mode) | (hw->address_mode ? MAP_PTI_MASK1 : MAP_PTI_MASK0);
snd_emu10k1_ptr_write(hw, MAPA, ch, temp);
snd_emu10k1_ptr_write(hw, MAPB, ch, temp);
snd_emu10k1_ptr_write(emu, TCB, 0, 0); /* taken from original driver */
snd_emu10k1_ptr_write(emu, TCBS, 0, 4); /* taken from original driver */
- silent_page = (emu->silent_page.addr << 1) | MAP_PTI_MASK;
+ silent_page = (emu->silent_page.addr << emu->address_mode) | (emu->address_mode ? MAP_PTI_MASK1 : MAP_PTI_MASK0);
for (ch = 0; ch < NUM_G; ch++) {
snd_emu10k1_ptr_write(emu, MAPA, ch, silent_page);
snd_emu10k1_ptr_write(emu, MAPB, ch, silent_page);
outl(reg | A_IOCFG_GPOUT0, emu->port + A_IOCFG);
}
+ if (emu->address_mode == 0) {
+ /* use 16M in 4G */
+ outl(inl(emu->port + HCFG) | HCFG_EXPANDED_MEM, emu->port + HCFG);
+ }
+
return 0;
}
*
*/
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x20011102,
- .driver = "Audigy2", .name = "SB Audigy 2 ZS Notebook [SB0530]",
+ .driver = "Audigy2", .name = "Audigy 2 ZS Notebook [SB0530]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.adc_1361t = 1, /* 24 bit capture instead of 16bit */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10051102,
- .driver = "Audigy2", .name = "SB Audigy 2 Platinum EX [SB0280]",
+ .driver = "Audigy2", .name = "Audigy 2 Platinum EX [SB0280]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
is_audigy = emu->audigy = c->emu10k2_chip;
+ /* set addressing mode */
+ emu->address_mode = is_audigy ? 0 : 1;
/* set the DMA transfer mask */
- emu->dma_mask = is_audigy ? AUDIGY_DMA_MASK : EMU10K1_DMA_MASK;
+ emu->dma_mask = emu->address_mode ? EMU10K1_DMA_MASK : AUDIGY_DMA_MASK;
if (pci_set_dma_mask(pci, emu->dma_mask) < 0 ||
pci_set_consistent_dma_mask(pci, emu->dma_mask) < 0) {
dev_err(card->dev,
emu->max_cache_pages = max_cache_bytes >> PAGE_SHIFT;
if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
- 32 * 1024, &emu->ptb_pages) < 0) {
+ (emu->address_mode ? 32 : 16) * 1024, &emu->ptb_pages) < 0) {
err = -ENOMEM;
goto error;
}
/* Clear silent pages and set up pointers */
memset(emu->silent_page.area, 0, PAGE_SIZE);
- silent_page = emu->silent_page.addr << 1;
- for (idx = 0; idx < MAXPAGES; idx++)
+ silent_page = emu->silent_page.addr << emu->address_mode;
+ for (idx = 0; idx < (emu->address_mode ? MAXPAGES1 : MAXPAGES0); idx++)
((u32 *)emu->ptb_pages.area)[idx] = cpu_to_le32(silent_page | idx);
/* set up voice indices */
snd_emu10k1_ptr_write(emu, Z1, voice, 0);
snd_emu10k1_ptr_write(emu, Z2, voice, 0);
/* invalidate maps */
- silent_page = ((unsigned int)emu->silent_page.addr << 1) | MAP_PTI_MASK;
+ silent_page = ((unsigned int)emu->silent_page.addr << emu->address_mode) | (emu->address_mode ? MAP_PTI_MASK1 : MAP_PTI_MASK0);
snd_emu10k1_ptr_write(emu, MAPA, voice, silent_page);
snd_emu10k1_ptr_write(emu, MAPB, voice, silent_page);
/* modulation envelope */
* aligned pages in others
*/
#define __set_ptb_entry(emu,page,addr) \
- (((u32 *)(emu)->ptb_pages.area)[page] = cpu_to_le32(((addr) << 1) | (page)))
+ (((u32 *)(emu)->ptb_pages.area)[page] = cpu_to_le32(((addr) << (emu->address_mode)) | (page)))
#define UNIT_PAGES (PAGE_SIZE / EMUPAGESIZE)
-#define MAX_ALIGN_PAGES (MAXPAGES / UNIT_PAGES)
+#define MAX_ALIGN_PAGES0 (MAXPAGES0 / UNIT_PAGES)
+#define MAX_ALIGN_PAGES1 (MAXPAGES1 / UNIT_PAGES)
/* get aligned page from offset address */
#define get_aligned_page(offset) ((offset) >> PAGE_SHIFT)
/* get offset address from aligned page */
}
page = blk->mapped_page + blk->pages;
}
- size = MAX_ALIGN_PAGES - page;
+ size = (emu->address_mode ? MAX_ALIGN_PAGES1 : MAX_ALIGN_PAGES0) - page;
if (size >= max_size) {
*nextp = pos;
return page;
q = get_emu10k1_memblk(p, mapped_link);
end_page = q->mapped_page;
} else
- end_page = MAX_ALIGN_PAGES;
+ end_page = (emu->address_mode ? MAX_ALIGN_PAGES1 : MAX_ALIGN_PAGES0);
/* remove links */
list_del(&blk->mapped_link);
if (snd_BUG_ON(!emu))
return NULL;
if (snd_BUG_ON(runtime->dma_bytes <= 0 ||
- runtime->dma_bytes >= MAXPAGES * EMUPAGESIZE))
+ runtime->dma_bytes >= (emu->address_mode ? MAXPAGES1 : MAXPAGES0) * EMUPAGESIZE))
return NULL;
hdr = emu->memhdr;
if (snd_BUG_ON(!hdr))
struct hda_pcm *pcm;
va_list args;
- va_start(args, fmt);
pcm = kzalloc(sizeof(*pcm), GFP_KERNEL);
if (!pcm)
return NULL;
pcm->codec = codec;
kref_init(&pcm->kref);
+ va_start(args, fmt);
pcm->name = kvasprintf(GFP_KERNEL, fmt, args);
+ va_end(args);
if (!pcm->name) {
kfree(pcm);
return NULL;
.put = vmaster_mute_mode_put,
};
+/* meta hook to call each driver's vmaster hook */
+static void vmaster_hook(void *private_data, int enabled)
+{
+ struct hda_vmaster_mute_hook *hook = private_data;
+
+ if (hook->mute_mode != HDA_VMUTE_FOLLOW_MASTER)
+ enabled = hook->mute_mode;
+ hook->hook(hook->codec, enabled);
+}
+
/**
* snd_hda_add_vmaster_hook - Add a vmaster hook for mute-LED
* @codec: the HDA codec
if (!hook->hook || !hook->sw_kctl)
return 0;
- snd_ctl_add_vmaster_hook(hook->sw_kctl, hook->hook, codec);
hook->codec = codec;
hook->mute_mode = HDA_VMUTE_FOLLOW_MASTER;
+ snd_ctl_add_vmaster_hook(hook->sw_kctl, vmaster_hook, hook);
if (!expose_enum_ctl)
return 0;
kctl = snd_ctl_new1(&vmaster_mute_mode, hook);
*/
if (hook->codec->bus->shutdown)
return;
- switch (hook->mute_mode) {
- case HDA_VMUTE_FOLLOW_MASTER:
- snd_ctl_sync_vmaster_hook(hook->sw_kctl);
- break;
- default:
- hook->hook(hook->codec, hook->mute_mode);
- break;
- }
+ snd_ctl_sync_vmaster_hook(hook->sw_kctl);
}
EXPORT_SYMBOL_GPL(snd_hda_sync_vmaster_hook);
val = PIN_IN;
if (cfg->inputs[i].type == AUTO_PIN_MIC)
val |= snd_hda_get_default_vref(codec, pin);
- if (pin != spec->hp_mic_pin)
+ if (pin != spec->hp_mic_pin &&
+ !snd_hda_codec_get_pin_target(codec, pin))
set_pin_target(codec, pin, val, false);
if (mixer) {
static void alc_fixup_dell_xps13(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
- if (action == HDA_FIXUP_ACT_PROBE) {
- struct alc_spec *spec = codec->spec;
- struct hda_input_mux *imux = &spec->gen.input_mux;
- int i;
+ struct alc_spec *spec = codec->spec;
+ struct hda_input_mux *imux = &spec->gen.input_mux;
+ int i;
+ switch (action) {
+ case HDA_FIXUP_ACT_PRE_PROBE:
+ /* mic pin 0x19 must be initialized with Vref Hi-Z, otherwise
+ * it causes a click noise at start up
+ */
+ snd_hda_codec_set_pin_target(codec, 0x19, PIN_VREFHIZ);
+ break;
+ case HDA_FIXUP_ACT_PROBE:
spec->shutup = alc_shutup_dell_xps13;
/* Make the internal mic the default input source. */
break;
}
}
+ break;
}
}
if (led_set_func(TPACPI_LED_MUTE, false) >= 0) {
old_vmaster_hook = spec->vmaster_mute.hook;
spec->vmaster_mute.hook = update_tpacpi_mute_led;
+ spec->vmaster_mute_enum = 1;
removefunc = false;
}
if (led_set_func(TPACPI_LED_MICMUTE, false) >= 0) {
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
+#include <linux/acpi.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
};
MODULE_DEVICE_TABLE(i2c, rt5645_i2c_id);
+#ifdef CONFIG_ACPI
+static struct acpi_device_id rt5645_acpi_match[] = {
+ { "10EC5645", 0 },
+ { "10EC5650", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, rt5645_acpi_match);
+#endif
+
static int rt5645_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
case RT5645_DMIC_DATA_GPIO12:
regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1,
- RT5645_DMIC_1_DP_MASK, RT5645_DMIC_2_DP_GPIO12);
+ RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO12);
regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1,
RT5645_GP12_PIN_MASK,
RT5645_GP12_PIN_DMIC2_SDA);
.driver = {
.name = "rt5645",
.owner = THIS_MODULE,
+ .acpi_match_table = ACPI_PTR(rt5645_acpi_match),
},
.probe = rt5645_i2c_probe,
.remove = rt5645_i2c_remove,
{RT5677_PR_BASE + 0x1e, 0x0000},
{RT5677_PR_BASE + 0x12, 0x0eaa},
{RT5677_PR_BASE + 0x14, 0x018a},
+ {RT5677_PR_BASE + 0x15, 0x0490},
+ {RT5677_PR_BASE + 0x38, 0x0f71},
+ {RT5677_PR_BASE + 0x39, 0x0f71},
};
#define RT5677_INIT_REG_LEN ARRAY_SIZE(init_list)
{
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
- int idx = rl6231_calc_dmic_clk(rt5677->sysclk);
+ int idx = rl6231_calc_dmic_clk(rt5677->lrck[RT5677_AIF1] << 8);
if (idx < 0)
dev_err(codec->dev, "Failed to set DMIC clock\n");
int i;
tfa9879 = devm_kzalloc(&i2c->dev, sizeof(*tfa9879), GFP_KERNEL);
- if (IS_ERR(tfa9879))
- return PTR_ERR(tfa9879);
+ if (!tfa9879)
+ return -ENOMEM;
i2c_set_clientdata(i2c, tfa9879);
}
ssi_private->irq = platform_get_irq(pdev, 0);
- if (!ssi_private->irq) {
+ if (ssi_private->irq < 0) {
dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
return ssi_private->irq;
}
# Platform Support
obj-$(CONFIG_SND_SOC_INTEL_HASWELL) += haswell/
obj-$(CONFIG_SND_SOC_INTEL_BAYTRAIL) += baytrail/
-obj-$(CONFIG_SND_SOC_INTEL_BAYTRAIL) += atom/
+obj-$(CONFIG_SND_SST_MFLD_PLATFORM) += atom/
# Machine support
obj-$(CONFIG_SND_SOC_INTEL_SST) += boards/
dsp_new_err:
sst_ipc_fini(ipc);
ipc_init_err:
- kfree(byt);
return err;
}
dsp_new_err:
sst_ipc_fini(ipc);
ipc_init_err:
- kfree(hsw);
return ret;
}
EXPORT_SYMBOL_GPL(sst_hsw_dsp_init);
int cmd, struct snd_soc_dai *dai)
{
struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
- int ret;
+ int ret = -EINVAL;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
return -ENOENT;
}
s3c24xx_i2s.regs = devm_ioremap_resource(&pdev->dev, res);
- if (s3c24xx_i2s.regs == NULL)
- return -ENXIO;
+ if (IS_ERR(s3c24xx_i2s.regs))
+ return PTR_ERR(s3c24xx_i2s.regs);
s3c24xx_i2s_pcm_stereo_out.dma_addr = res->start + S3C2410_IISFIFO;
s3c24xx_i2s_pcm_stereo_in.dma_addr = res->start + S3C2410_IISFIFO;
(void *)id);
}
if (IS_ERR_OR_NULL(dmaen->chan)) {
+ dmaen->chan = NULL;
dev_err(dev, "can't get dma channel\n");
goto rsnd_dma_channel_err;
}
if (snd_BUG_ON(!arg || !emu))
return -ENXIO;
- mutex_lock(&emu->register_mutex);
-
- if (!snd_emux_inc_count(emu)) {
- mutex_unlock(&emu->register_mutex);
+ if (!snd_emux_inc_count(emu))
return -EFAULT;
- }
memset(&callback, 0, sizeof(callback));
callback.owner = THIS_MODULE;
if (p == NULL) {
snd_printk(KERN_ERR "can't create port\n");
snd_emux_dec_count(emu);
- mutex_unlock(&emu->register_mutex);
return -ENOMEM;
}
reset_port_mode(p, arg->seq_mode);
snd_emux_reset_port(p);
-
- mutex_unlock(&emu->register_mutex);
return 0;
}
if (snd_BUG_ON(!emu))
return -ENXIO;
- mutex_lock(&emu->register_mutex);
snd_emux_sounds_off_all(p);
snd_soundfont_close_check(emu->sflist, SF_CLIENT_NO(p->chset.port));
snd_seq_event_port_detach(p->chset.client, p->chset.port);
snd_emux_dec_count(emu);
- mutex_unlock(&emu->register_mutex);
return 0;
}
if (emu->voices)
snd_emux_terminate_all(emu);
- mutex_lock(&emu->register_mutex);
if (emu->client >= 0) {
snd_seq_delete_kernel_client(emu->client);
emu->client = -1;
}
- mutex_unlock(&emu->register_mutex);
}
/*
* increment usage count
*/
-int
-snd_emux_inc_count(struct snd_emux *emu)
+static int
+__snd_emux_inc_count(struct snd_emux *emu)
{
emu->used++;
if (!try_module_get(emu->ops.owner))
return 1;
}
+int snd_emux_inc_count(struct snd_emux *emu)
+{
+ int ret;
+
+ mutex_lock(&emu->register_mutex);
+ ret = __snd_emux_inc_count(emu);
+ mutex_unlock(&emu->register_mutex);
+ return ret;
+}
/*
* decrease usage count
*/
-void
-snd_emux_dec_count(struct snd_emux *emu)
+static void
+__snd_emux_dec_count(struct snd_emux *emu)
{
module_put(emu->card->module);
emu->used--;
module_put(emu->ops.owner);
}
+void snd_emux_dec_count(struct snd_emux *emu)
+{
+ mutex_lock(&emu->register_mutex);
+ __snd_emux_dec_count(emu);
+ mutex_unlock(&emu->register_mutex);
+}
/*
* Routine that is called upon a first use of a particular port
mutex_lock(&emu->register_mutex);
snd_emux_init_port(p);
- snd_emux_inc_count(emu);
+ __snd_emux_inc_count(emu);
mutex_unlock(&emu->register_mutex);
return 0;
}
mutex_lock(&emu->register_mutex);
snd_emux_sounds_off_all(p);
- snd_emux_dec_count(emu);
+ __snd_emux_dec_count(emu);
mutex_unlock(&emu->register_mutex);
return 0;
}
LIBFILE = $(OUTPUT)libapi.a
CFLAGS := $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
-CFLAGS += -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -D_FORTIFY_SOURCE=2 -fPIC
+CFLAGS += -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -fPIC
CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
RM = rm -f
} else if (el_size == 4) {
trace_seq_printf(s, "%u", *(uint32_t *)num);
} else if (el_size == 8) {
- trace_seq_printf(s, "%lu", *(uint64_t *)num);
+ trace_seq_printf(s, "%"PRIu64, *(uint64_t *)num);
} else {
trace_seq_printf(s, "BAD SIZE:%d 0x%x",
el_size, *(uint8_t *)num);
if (!fshared)
futex_flag = FUTEX_PRIVATE_FLAG;
+ if (nrequeue > nthreads)
+ nrequeue = nthreads;
+
printf("Run summary [PID %d]: Requeuing %d threads (from [%s] %p to %p), "
"%d at a time.\n\n", getpid(), nthreads,
fshared ? "shared":"private", &futex1, &futex2, nrequeue);
/* Ok, all threads are patiently blocked, start requeueing */
gettimeofday(&start, NULL);
- for (nrequeued = 0; nrequeued < nthreads; nrequeued += nrequeue) {
+ while (nrequeued < nthreads) {
/*
* Do not wakeup any tasks blocked on futex1, allowing
* us to really measure futex_wait functionality.
*/
- futex_cmp_requeue(&futex1, 0, &futex2, 0,
- nrequeue, futex_flag);
+ nrequeued += futex_cmp_requeue(&futex1, 0, &futex2, 0,
+ nrequeue, futex_flag);
}
+
gettimeofday(&end, NULL);
timersub(&end, &start, &runtime);
- if (nrequeued > nthreads)
- nrequeued = nthreads;
-
update_stats(&requeued_stats, nrequeued);
update_stats(&requeuetime_stats, runtime.tv_usec);
}
/* everybody should be blocked on futex2, wake'em up */
- nrequeued = futex_wake(&futex2, nthreads, futex_flag);
+ nrequeued = futex_wake(&futex2, nrequeued, futex_flag);
if (nthreads != nrequeued)
warnx("couldn't wakeup all tasks (%d/%d)", nrequeued, nthreads);
OPT_INTEGER('H', "thp" , &p0.thp, "MADV_NOHUGEPAGE < 0 < MADV_HUGEPAGE"),
OPT_BOOLEAN('c', "show_convergence", &p0.show_convergence, "show convergence details"),
OPT_BOOLEAN('m', "measure_convergence", &p0.measure_convergence, "measure convergence latency"),
- OPT_BOOLEAN('q', "quiet" , &p0.show_quiet, "bzero the initial allocations"),
+ OPT_BOOLEAN('q', "quiet" , &p0.show_quiet, "quiet mode"),
OPT_BOOLEAN('S', "serialize-startup", &p0.serialize_startup,"serialize thread startup"),
/* Special option string parsing callbacks: */
td = g->threads + task_nr;
node = numa_node_of_cpu(td->curr_cpu);
+ if (node < 0) /* curr_cpu was likely still -1 */
+ return 0;
+
node_present[node] = 1;
}
for (p = 0; p < g->p.nr_proc; p++) {
unsigned int nodes = count_process_nodes(p);
+ if (!nodes) {
+ *strong = 0;
+ return;
+ }
+
nodes_min = min(nodes, nodes_min);
nodes_max = max(nodes, nodes_max);
}
if (!name)
name = "main,";
- if (g->p.show_quiet)
+ if (!g->p.show_quiet)
printf(" %-30s %15.3f, %-15s %s\n", name, val, txt_unit, txt_short);
else
printf(" %14.3f %s\n", val, txt_long);
return 0;
}
-static struct page_stat *search_page_alloc_stat(struct page_stat *stat, bool create)
+static struct page_stat *search_page_alloc_stat(struct page_stat *pstat, bool create)
{
struct rb_node **node = &page_alloc_tree.rb_node;
struct rb_node *parent = NULL;
parent = *node;
data = rb_entry(*node, struct page_stat, node);
- cmp = page_stat_cmp(data, stat);
+ cmp = page_stat_cmp(data, pstat);
if (cmp < 0)
node = &parent->rb_left;
else if (cmp > 0)
data = zalloc(sizeof(*data));
if (data != NULL) {
- data->page = stat->page;
- data->order = stat->order;
- data->gfp_flags = stat->gfp_flags;
- data->migrate_type = stat->migrate_type;
+ data->page = pstat->page;
+ data->order = pstat->order;
+ data->gfp_flags = pstat->gfp_flags;
+ data->migrate_type = pstat->migrate_type;
rb_link_node(&data->node, parent, node);
rb_insert_color(&data->node, &page_alloc_tree);
unsigned int migrate_type = perf_evsel__intval(evsel, sample,
"migratetype");
u64 bytes = kmem_page_size << order;
- struct page_stat *stat;
+ struct page_stat *pstat;
struct page_stat this = {
.order = order,
.gfp_flags = gfp_flags,
* This is to find the current page (with correct gfp flags and
* migrate type) at free event.
*/
- stat = search_page(page, true);
- if (stat == NULL)
+ pstat = search_page(page, true);
+ if (pstat == NULL)
return -ENOMEM;
- stat->order = order;
- stat->gfp_flags = gfp_flags;
- stat->migrate_type = migrate_type;
+ pstat->order = order;
+ pstat->gfp_flags = gfp_flags;
+ pstat->migrate_type = migrate_type;
this.page = page;
- stat = search_page_alloc_stat(&this, true);
- if (stat == NULL)
+ pstat = search_page_alloc_stat(&this, true);
+ if (pstat == NULL)
return -ENOMEM;
- stat->nr_alloc++;
- stat->alloc_bytes += bytes;
+ pstat->nr_alloc++;
+ pstat->alloc_bytes += bytes;
order_stats[order][migrate_type]++;
u64 page;
unsigned int order = perf_evsel__intval(evsel, sample, "order");
u64 bytes = kmem_page_size << order;
- struct page_stat *stat;
+ struct page_stat *pstat;
struct page_stat this = {
.order = order,
};
nr_page_frees++;
total_page_free_bytes += bytes;
- stat = search_page(page, false);
- if (stat == NULL) {
+ pstat = search_page(page, false);
+ if (pstat == NULL) {
pr_debug2("missing free at page %"PRIx64" (order: %d)\n",
page, order);
}
this.page = page;
- this.gfp_flags = stat->gfp_flags;
- this.migrate_type = stat->migrate_type;
+ this.gfp_flags = pstat->gfp_flags;
+ this.migrate_type = pstat->migrate_type;
- rb_erase(&stat->node, &page_tree);
- free(stat);
+ rb_erase(&pstat->node, &page_tree);
+ free(pstat);
- stat = search_page_alloc_stat(&this, false);
- if (stat == NULL)
+ pstat = search_page_alloc_stat(&this, false);
+ if (pstat == NULL)
return -ENOENT;
- stat->nr_free++;
- stat->free_bytes += bytes;
+ pstat->nr_free++;
+ pstat->free_bytes += bytes;
return 0;
}
nr_page_frees, total_page_free_bytes / 1024);
printf("\n");
- printf("%-30s: %'16lu [ %'16"PRIu64" KB ]\n", "Total alloc+freed requests",
+ printf("%-30s: %'16"PRIu64" [ %'16"PRIu64" KB ]\n", "Total alloc+freed requests",
nr_alloc_freed, (total_alloc_freed_bytes) / 1024);
- printf("%-30s: %'16lu [ %'16"PRIu64" KB ]\n", "Total alloc-only requests",
+ printf("%-30s: %'16"PRIu64" [ %'16"PRIu64" KB ]\n", "Total alloc-only requests",
nr_page_allocs - nr_alloc_freed,
(total_page_alloc_bytes - total_alloc_freed_bytes) / 1024);
printf("%-30s: %'16lu [ %'16"PRIu64" KB ]\n", "Total free-only requests",
fprintf(stdout, "\n\n");
}
- if (sort_order == default_sort_order &&
+ if (sort_order == NULL &&
parent_pattern == default_parent_pattern) {
fprintf(stdout, "#\n# (%s)\n#\n", help);
"Kernel address maps (/proc/{kallsyms,modules}) are restricted.\n\n"
"Check /proc/sys/kernel/kptr_restrict.\n\n"
"Kernel%s samples will not be resolved.\n",
- !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ?
+ al.map && !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ?
" modules" : "");
if (use_browser <= 0)
sleep(5);
if (err < 0)
goto out_error_mmap;
+ if (!target__none(&trace->opts.target))
+ perf_evlist__enable(evlist);
+
if (forks)
perf_evlist__start_workload(evlist);
- else
- perf_evlist__enable(evlist);
trace->multiple_threads = evlist->threads->map[0] == -1 ||
evlist->threads->nr > 1 ||
if (interrupted)
goto out_disable;
+
+ if (done && !draining) {
+ perf_evlist__disable(evlist);
+ draining = true;
+ }
}
}
*
* TODO:Group name support
*/
+ if (!arg)
+ return -EINVAL;
ptr = strpbrk(arg, ";=@+%");
if (ptr && *ptr == '=') { /* Event name */
/* Search child die for local variables and parameters. */
if (!die_find_variable_at(sc_die, pf->pvar->var, pf->addr, &vr_die)) {
/* Search again in global variables */
- if (!die_find_variable_at(&pf->cu_die, pf->pvar->var, 0, &vr_die))
+ if (!die_find_variable_at(&pf->cu_die, pf->pvar->var,
+ 0, &vr_die)) {
pr_warning("Failed to find '%s' in this function.\n",
pf->pvar->var);
ret = -ENOENT;
+ }
}
if (ret >= 0)
ret = convert_variable(&vr_die, pf);
$(MAKE) -s -C ebb emit_tests
endef
-DEFAULT_INSTALL := $(INSTALL_RULE)
+DEFAULT_INSTALL_RULE := $(INSTALL_RULE)
override define INSTALL_RULE
$(DEFAULT_INSTALL_RULE)
$(MAKE) -C ebb install
-TEST_PROGS := tm-resched-dscr tm-syscall
+TEST_PROGS := tm-resched-dscr
all: $(TEST_PROGS)
projects / linux-drm-fsl-dcu.git / commitdiff