#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-struct sys_timer omap_timer;
-/*
- * ---------------------------------------------------------------------------
- * MPU timer
- * ---------------------------------------------------------------------------
- */
#define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE
#define OMAP_MPU_TIMER_OFFSET 0x100
return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
}
-/*
- * MPU_TICKS_PER_SEC must be an even number, otherwise machinecycles_to_usecs
- * will break. On P2, the timer count rate is 6.5 MHz after programming PTV
- * with 0. This divides the 13MHz input by 2, and is undocumented.
- */
-#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
-/* REVISIT: This ifdef construct should be replaced by a query to clock
- * framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz.
- */
-#define MPU_TICKS_PER_SEC (13000000 / 2)
-#else
-#define MPU_TICKS_PER_SEC (12000000 / 2)
-#endif
-
-#define MPU_TIMER_TICK_PERIOD ((MPU_TICKS_PER_SEC / HZ) - 1)
typedef struct {
u32 cntl; /* CNTL_TIMER, R/W */
return timer->read_tim;
}
-static inline void omap_mpu_timer_start(int nr, unsigned long load_val)
+static inline void omap_mpu_set_autoreset(int nr)
{
volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
- timer->cntl = MPU_TIMER_CLOCK_ENABLE;
- udelay(1);
- timer->load_tim = load_val;
- udelay(1);
- timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST);
+ timer->cntl = timer->cntl | MPU_TIMER_AR;
}
-unsigned long omap_mpu_timer_ticks_to_usecs(unsigned long nr_ticks)
+static inline void omap_mpu_remove_autoreset(int nr)
{
- unsigned long long nsec;
+ volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
- nsec = cycles_2_ns((unsigned long long)nr_ticks);
- return (unsigned long)nsec / 1000;
+ timer->cntl = timer->cntl & ~MPU_TIMER_AR;
}
-/*
- * Last processed system timer interrupt
- */
-static unsigned long omap_mpu_timer_last = 0;
+static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
+ int autoreset)
+{
+ volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+ unsigned int timerflags = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST);
+
+ if (autoreset) timerflags |= MPU_TIMER_AR;
+
+ timer->cntl = MPU_TIMER_CLOCK_ENABLE;
+ udelay(1);
+ timer->load_tim = load_val;
+ udelay(1);
+ timer->cntl = timerflags;
+}
/*
- * Returns elapsed usecs since last system timer interrupt
+ * ---------------------------------------------------------------------------
+ * MPU timer 1 ... count down to zero, interrupt, reload
+ * ---------------------------------------------------------------------------
*/
-static unsigned long omap_mpu_timer_gettimeoffset(void)
+static int omap_mpu_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
{
- unsigned long now = 0 - omap_mpu_timer_read(0);
- unsigned long elapsed = now - omap_mpu_timer_last;
+ omap_mpu_timer_start(0, cycles, 0);
+ return 0;
+}
- return omap_mpu_timer_ticks_to_usecs(elapsed);
+static void omap_mpu_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ omap_mpu_set_autoreset(0);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ omap_mpu_remove_autoreset(0);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ break;
+ }
}
-/*
- * Elapsed time between interrupts is calculated using timer0.
- * Latency during the interrupt is calculated using timer1.
- * Both timer0 and timer1 are counting at 6MHz (P2 6.5MHz).
- */
-static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id)
+static struct clock_event_device clockevent_mpu_timer1 = {
+ .name = "mpu_timer1",
+ .features = CLOCK_EVT_FEAT_PERIODIC, CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_next_event = omap_mpu_set_next_event,
+ .set_mode = omap_mpu_set_mode,
+};
+
+static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
{
- unsigned long now, latency;
+ struct clock_event_device *evt = &clockevent_mpu_timer1;
- write_seqlock(&xtime_lock);
- now = 0 - omap_mpu_timer_read(0);
- latency = MPU_TICKS_PER_SEC / HZ - omap_mpu_timer_read(1);
- omap_mpu_timer_last = now - latency;
- timer_tick();
- write_sequnlock(&xtime_lock);
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
-static struct irqaction omap_mpu_timer_irq = {
- .name = "mpu timer",
+static struct irqaction omap_mpu_timer1_irq = {
+ .name = "mpu_timer1",
.flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = omap_mpu_timer_interrupt,
+ .handler = omap_mpu_timer1_interrupt,
};
-static unsigned long omap_mpu_timer1_overflows;
-static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
+static __init void omap_init_mpu_timer(unsigned long rate)
+{
+ set_cyc2ns_scale(rate / 1000);
+
+ setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+ omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
+
+ clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC,
+ clockevent_mpu_timer1.shift);
+ clockevent_mpu_timer1.max_delta_ns =
+ clockevent_delta2ns(-1, &clockevent_mpu_timer1);
+ clockevent_mpu_timer1.min_delta_ns =
+ clockevent_delta2ns(1, &clockevent_mpu_timer1);
+
+ clockevent_mpu_timer1.cpumask = cpumask_of_cpu(0);
+ clockevents_register_device(&clockevent_mpu_timer1);
+}
+
+
+/*
+ * ---------------------------------------------------------------------------
+ * MPU timer 2 ... free running 32-bit clock source and scheduler clock
+ * ---------------------------------------------------------------------------
+ */
+
+static unsigned long omap_mpu_timer2_overflows;
+
+static irqreturn_t omap_mpu_timer2_interrupt(int irq, void *dev_id)
{
- omap_mpu_timer1_overflows++;
+ omap_mpu_timer2_overflows++;
return IRQ_HANDLED;
}
-static struct irqaction omap_mpu_timer1_irq = {
- .name = "mpu timer1 overflow",
+static struct irqaction omap_mpu_timer2_irq = {
+ .name = "mpu_timer2",
.flags = IRQF_DISABLED,
- .handler = omap_mpu_timer1_interrupt,
+ .handler = omap_mpu_timer2_interrupt,
};
-static __init void omap_init_mpu_timer(void)
+static cycle_t mpu_read(void)
{
- set_cyc2ns_scale(MPU_TICKS_PER_SEC / 1000);
- omap_timer.offset = omap_mpu_timer_gettimeoffset;
- setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
- setup_irq(INT_TIMER2, &omap_mpu_timer_irq);
- omap_mpu_timer_start(0, 0xffffffff);
- omap_mpu_timer_start(1, MPU_TIMER_TICK_PERIOD);
+ return ~omap_mpu_timer_read(1);
+}
+
+static struct clocksource clocksource_mpu = {
+ .name = "mpu_timer2",
+ .rating = 300,
+ .read = mpu_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 24,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init omap_init_clocksource(unsigned long rate)
+{
+ static char err[] __initdata = KERN_ERR
+ "%s: can't register clocksource!\n";
+
+ clocksource_mpu.mult
+ = clocksource_khz2mult(rate/1000, clocksource_mpu.shift);
+
+ setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
+ omap_mpu_timer_start(1, ~0, 1);
+
+ if (clocksource_register(&clocksource_mpu))
+ printk(err, clocksource_mpu.name);
}
+
/*
* Scheduler clock - returns current time in nanosec units.
*/
unsigned long long sched_clock(void)
{
- unsigned long ticks = 0 - omap_mpu_timer_read(0);
+ unsigned long ticks = 0 - omap_mpu_timer_read(1);
unsigned long long ticks64;
- ticks64 = omap_mpu_timer1_overflows;
+ ticks64 = omap_mpu_timer2_overflows;
ticks64 <<= 32;
ticks64 |= ticks;
*/
static void __init omap_timer_init(void)
{
- omap_init_mpu_timer();
+ struct clk *ck_ref = clk_get(NULL, "ck_ref");
+ unsigned long rate;
+
+ BUG_ON(IS_ERR(ck_ref));
+
+ rate = clk_get_rate(ck_ref);
+ clk_put(ck_ref);
+
+ /* PTV = 0 */
+ rate /= 2;
+
+ omap_init_mpu_timer(rate);
+ omap_init_clocksource(rate);
}
struct sys_timer omap_timer = {
.init = omap_timer_init,
- .offset = NULL, /* Initialized later */
};
#include <linux/spinlock.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
#include <asm/system.h>
#include <asm/hardware.h>
#define OMAP1_32K_TIMER_TVR 0x00
#define OMAP1_32K_TIMER_TCR 0x04
-#define OMAP_32K_TICKS_PER_HZ (32768 / HZ)
+#define OMAP_32K_TICKS_PER_SEC (32768)
/*
* TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
* so with HZ = 128, TVR = 255.
*/
-#define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1)
+#define OMAP_32K_TIMER_TICK_PERIOD ((OMAP_32K_TICKS_PER_SEC / HZ) - 1)
#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \
(((nr_jiffies) * (clock_rate)) / HZ)
#endif
+static void omap_32k_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_PERIODIC:
+ omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ omap_32k_timer_stop();
+ break;
+ }
+}
+
+static struct clock_event_device clockevent_32k_timer = {
+ .name = "32k-timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .shift = 32,
+ .set_mode = omap_32k_timer_set_mode,
+};
+
/*
* The 32KHz synchronized timer is an additional timer on 16xx.
* It is always running.
static unsigned long omap_32k_last_tick = 0;
-/*
- * Returns elapsed usecs since last 32k timer interrupt
- */
-static unsigned long omap_32k_timer_gettimeoffset(void)
-{
- unsigned long now = omap_32k_sync_timer_read();
- return omap_32k_ticks_to_usecs(now - omap_32k_last_tick);
-}
-
/*
* Returns current time from boot in nsecs. It's OK for this to wrap
* around for now, as it's just a relative time stamp.
return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read());
}
-/*
- * Timer interrupt for 32KHz timer. When dynamic tick is enabled, this
- * function is also called from other interrupts to remove latency
- * issues with dynamic tick. In the dynamic tick case, we need to lock
- * with irqsave.
- */
-static inline irqreturn_t _omap_32k_timer_interrupt(int irq, void *dev_id)
-{
- unsigned long now;
-
- omap_32k_timer_ack_irq();
- now = omap_32k_sync_timer_read();
-
- while ((signed long)(now - omap_32k_last_tick)
- >= OMAP_32K_TICKS_PER_HZ) {
- omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
- timer_tick();
- }
-
- /* Restart timer so we don't drift off due to modulo or dynamic tick.
- * By default we program the next timer to be continuous to avoid
- * latencies during high system load. During dynamic tick operation the
- * continuous timer can be overridden from pm_idle to be longer.
- */
- omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t omap_32k_timer_handler(int irq, void *dev_id)
-{
- return _omap_32k_timer_interrupt(irq, dev_id);
-}
-
static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
{
- unsigned long flags;
+ struct clock_event_device *evt = &clockevent_32k_timer;
+ omap_32k_timer_ack_irq();
- write_seqlock_irqsave(&xtime_lock, flags);
- _omap_32k_timer_interrupt(irq, dev_id);
- write_sequnlock_irqrestore(&xtime_lock, flags);
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
-#ifdef CONFIG_NO_IDLE_HZ
-/*
- * Programs the next timer interrupt needed. Called when dynamic tick is
- * enabled, and to reprogram the ticks to skip from pm_idle. Note that
- * we can keep the timer continuous, and don't need to set it to run in
- * one-shot mode. This is because the timer will get reprogrammed again
- * after next interrupt.
- */
-void omap_32k_timer_reprogram(unsigned long next_tick)
-{
- unsigned long ticks = JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1;
- unsigned long now = omap_32k_sync_timer_read();
- unsigned long idled = now - omap_32k_last_tick;
-
- if (idled + 1 < ticks)
- ticks -= idled;
- else
- ticks = 1;
- omap_32k_timer_start(ticks);
-}
-
-static struct irqaction omap_32k_timer_irq;
-extern struct timer_update_handler timer_update;
-
-static int omap_32k_timer_enable_dyn_tick(void)
-{
- /* No need to reprogram timer, just use the next interrupt */
- return 0;
-}
-
-static int omap_32k_timer_disable_dyn_tick(void)
-{
- omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
- return 0;
-}
-
-static struct dyn_tick_timer omap_dyn_tick_timer = {
- .enable = omap_32k_timer_enable_dyn_tick,
- .disable = omap_32k_timer_disable_dyn_tick,
- .reprogram = omap_32k_timer_reprogram,
- .handler = omap_32k_timer_handler,
-};
-#endif /* CONFIG_NO_IDLE_HZ */
-
static struct irqaction omap_32k_timer_irq = {
.name = "32KHz timer",
.flags = IRQF_DISABLED | IRQF_TIMER,
static __init void omap_init_32k_timer(void)
{
-#ifdef CONFIG_NO_IDLE_HZ
- omap_timer.dyn_tick = &omap_dyn_tick_timer;
-#endif
-
if (cpu_class_is_omap1())
setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
- omap_timer.offset = omap_32k_timer_gettimeoffset;
omap_32k_last_tick = omap_32k_sync_timer_read();
#ifdef CONFIG_ARCH_OMAP2
}
#endif
- omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+ clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC,
+ NSEC_PER_SEC,
+ clockevent_32k_timer.shift);
+ clockevent_32k_timer.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &clockevent_32k_timer);
+ clockevent_32k_timer.min_delta_ns =
+ clockevent_delta2ns(1, &clockevent_32k_timer);
+
+ clockevent_32k_timer.cpumask = cpumask_of_cpu(0);
+ clockevents_register_device(&clockevent_32k_timer);
}
/*
struct sys_timer omap_timer = {
.init = omap_timer_init,
- .offset = NULL, /* Initialized later */
};
projects / linux-drm-fsl-dcu.git / commitdiff