i40e: sync header files with hardware
[linux-drm-fsl-dcu.git] / net / mac80211 / sta_info.h
1 /*
2  * Copyright 2002-2005, Devicescape Software, Inc.
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  */
8
9 #ifndef STA_INFO_H
10 #define STA_INFO_H
11
12 #include <linux/list.h>
13 #include <linux/types.h>
14 #include <linux/if_ether.h>
15 #include <linux/workqueue.h>
16 #include <linux/average.h>
17 #include <linux/etherdevice.h>
18 #include "key.h"
19
20 /**
21  * enum ieee80211_sta_info_flags - Stations flags
22  *
23  * These flags are used with &struct sta_info's @flags member, but
24  * only indirectly with set_sta_flag() and friends.
25  *
26  * @WLAN_STA_AUTH: Station is authenticated.
27  * @WLAN_STA_ASSOC: Station is associated.
28  * @WLAN_STA_PS_STA: Station is in power-save mode
29  * @WLAN_STA_AUTHORIZED: Station is authorized to send/receive traffic.
30  *      This bit is always checked so needs to be enabled for all stations
31  *      when virtual port control is not in use.
32  * @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble
33  *      frames.
34  * @WLAN_STA_WME: Station is a QoS-STA.
35  * @WLAN_STA_WDS: Station is one of our WDS peers.
36  * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
37  *      IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
38  *      frame to this station is transmitted.
39  * @WLAN_STA_MFP: Management frame protection is used with this STA.
40  * @WLAN_STA_BLOCK_BA: Used to deny ADDBA requests (both TX and RX)
41  *      during suspend/resume and station removal.
42  * @WLAN_STA_PS_DRIVER: driver requires keeping this station in
43  *      power-save mode logically to flush frames that might still
44  *      be in the queues
45  * @WLAN_STA_PSPOLL: Station sent PS-poll while driver was keeping
46  *      station in power-save mode, reply when the driver unblocks.
47  * @WLAN_STA_TDLS_PEER: Station is a TDLS peer.
48  * @WLAN_STA_TDLS_PEER_AUTH: This TDLS peer is authorized to send direct
49  *      packets. This means the link is enabled.
50  * @WLAN_STA_UAPSD: Station requested unscheduled SP while driver was
51  *      keeping station in power-save mode, reply when the driver
52  *      unblocks the station.
53  * @WLAN_STA_SP: Station is in a service period, so don't try to
54  *      reply to other uAPSD trigger frames or PS-Poll.
55  * @WLAN_STA_4ADDR_EVENT: 4-addr event was already sent for this frame.
56  * @WLAN_STA_INSERTED: This station is inserted into the hash table.
57  * @WLAN_STA_RATE_CONTROL: rate control was initialized for this station.
58  * @WLAN_STA_TOFFSET_KNOWN: toffset calculated for this station is valid.
59  * @WLAN_STA_MPSP_OWNER: local STA is owner of a mesh Peer Service Period.
60  * @WLAN_STA_MPSP_RECIPIENT: local STA is recipient of a MPSP.
61  */
62 enum ieee80211_sta_info_flags {
63         WLAN_STA_AUTH,
64         WLAN_STA_ASSOC,
65         WLAN_STA_PS_STA,
66         WLAN_STA_AUTHORIZED,
67         WLAN_STA_SHORT_PREAMBLE,
68         WLAN_STA_WME,
69         WLAN_STA_WDS,
70         WLAN_STA_CLEAR_PS_FILT,
71         WLAN_STA_MFP,
72         WLAN_STA_BLOCK_BA,
73         WLAN_STA_PS_DRIVER,
74         WLAN_STA_PSPOLL,
75         WLAN_STA_TDLS_PEER,
76         WLAN_STA_TDLS_PEER_AUTH,
77         WLAN_STA_UAPSD,
78         WLAN_STA_SP,
79         WLAN_STA_4ADDR_EVENT,
80         WLAN_STA_INSERTED,
81         WLAN_STA_RATE_CONTROL,
82         WLAN_STA_TOFFSET_KNOWN,
83         WLAN_STA_MPSP_OWNER,
84         WLAN_STA_MPSP_RECIPIENT,
85 };
86
87 #define ADDBA_RESP_INTERVAL HZ
88 #define HT_AGG_MAX_RETRIES              15
89 #define HT_AGG_BURST_RETRIES            3
90 #define HT_AGG_RETRIES_PERIOD           (15 * HZ)
91
92 #define HT_AGG_STATE_DRV_READY          0
93 #define HT_AGG_STATE_RESPONSE_RECEIVED  1
94 #define HT_AGG_STATE_OPERATIONAL        2
95 #define HT_AGG_STATE_STOPPING           3
96 #define HT_AGG_STATE_WANT_START         4
97 #define HT_AGG_STATE_WANT_STOP          5
98
99 enum ieee80211_agg_stop_reason {
100         AGG_STOP_DECLINED,
101         AGG_STOP_LOCAL_REQUEST,
102         AGG_STOP_PEER_REQUEST,
103         AGG_STOP_DESTROY_STA,
104 };
105
106 /**
107  * struct tid_ampdu_tx - TID aggregation information (Tx).
108  *
109  * @rcu_head: rcu head for freeing structure
110  * @session_timer: check if we keep Tx-ing on the TID (by timeout value)
111  * @addba_resp_timer: timer for peer's response to addba request
112  * @pending: pending frames queue -- use sta's spinlock to protect
113  * @dialog_token: dialog token for aggregation session
114  * @timeout: session timeout value to be filled in ADDBA requests
115  * @state: session state (see above)
116  * @last_tx: jiffies of last tx activity
117  * @stop_initiator: initiator of a session stop
118  * @tx_stop: TX DelBA frame when stopping
119  * @buf_size: reorder buffer size at receiver
120  * @failed_bar_ssn: ssn of the last failed BAR tx attempt
121  * @bar_pending: BAR needs to be re-sent
122  *
123  * This structure's lifetime is managed by RCU, assignments to
124  * the array holding it must hold the aggregation mutex.
125  *
126  * The TX path can access it under RCU lock-free if, and
127  * only if, the state has the flag %HT_AGG_STATE_OPERATIONAL
128  * set. Otherwise, the TX path must also acquire the spinlock
129  * and re-check the state, see comments in the tx code
130  * touching it.
131  */
132 struct tid_ampdu_tx {
133         struct rcu_head rcu_head;
134         struct timer_list session_timer;
135         struct timer_list addba_resp_timer;
136         struct sk_buff_head pending;
137         unsigned long state;
138         unsigned long last_tx;
139         u16 timeout;
140         u8 dialog_token;
141         u8 stop_initiator;
142         bool tx_stop;
143         u8 buf_size;
144
145         u16 failed_bar_ssn;
146         bool bar_pending;
147 };
148
149 /**
150  * struct tid_ampdu_rx - TID aggregation information (Rx).
151  *
152  * @reorder_buf: buffer to reorder incoming aggregated MPDUs
153  * @reorder_time: jiffies when skb was added
154  * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
155  * @reorder_timer: releases expired frames from the reorder buffer.
156  * @last_rx: jiffies of last rx activity
157  * @head_seq_num: head sequence number in reordering buffer.
158  * @stored_mpdu_num: number of MPDUs in reordering buffer
159  * @ssn: Starting Sequence Number expected to be aggregated.
160  * @buf_size: buffer size for incoming A-MPDUs
161  * @timeout: reset timer value (in TUs).
162  * @dialog_token: dialog token for aggregation session
163  * @rcu_head: RCU head used for freeing this struct
164  * @reorder_lock: serializes access to reorder buffer, see below.
165  *
166  * This structure's lifetime is managed by RCU, assignments to
167  * the array holding it must hold the aggregation mutex.
168  *
169  * The @reorder_lock is used to protect the members of this
170  * struct, except for @timeout, @buf_size and @dialog_token,
171  * which are constant across the lifetime of the struct (the
172  * dialog token being used only for debugging).
173  */
174 struct tid_ampdu_rx {
175         struct rcu_head rcu_head;
176         spinlock_t reorder_lock;
177         struct sk_buff **reorder_buf;
178         unsigned long *reorder_time;
179         struct timer_list session_timer;
180         struct timer_list reorder_timer;
181         unsigned long last_rx;
182         u16 head_seq_num;
183         u16 stored_mpdu_num;
184         u16 ssn;
185         u16 buf_size;
186         u16 timeout;
187         u8 dialog_token;
188 };
189
190 /**
191  * struct sta_ampdu_mlme - STA aggregation information.
192  *
193  * @tid_rx: aggregation info for Rx per TID -- RCU protected
194  * @tid_tx: aggregation info for Tx per TID
195  * @tid_start_tx: sessions where start was requested
196  * @addba_req_num: number of times addBA request has been sent.
197  * @last_addba_req_time: timestamp of the last addBA request.
198  * @dialog_token_allocator: dialog token enumerator for each new session;
199  * @work: work struct for starting/stopping aggregation
200  * @tid_rx_timer_expired: bitmap indicating on which TIDs the
201  *      RX timer expired until the work for it runs
202  * @tid_rx_stop_requested:  bitmap indicating which BA sessions per TID the
203  *      driver requested to close until the work for it runs
204  * @mtx: mutex to protect all TX data (except non-NULL assignments
205  *      to tid_tx[idx], which are protected by the sta spinlock)
206  *      tid_start_tx is also protected by sta->lock.
207  */
208 struct sta_ampdu_mlme {
209         struct mutex mtx;
210         /* rx */
211         struct tid_ampdu_rx __rcu *tid_rx[IEEE80211_NUM_TIDS];
212         unsigned long tid_rx_timer_expired[BITS_TO_LONGS(IEEE80211_NUM_TIDS)];
213         unsigned long tid_rx_stop_requested[BITS_TO_LONGS(IEEE80211_NUM_TIDS)];
214         /* tx */
215         struct work_struct work;
216         struct tid_ampdu_tx __rcu *tid_tx[IEEE80211_NUM_TIDS];
217         struct tid_ampdu_tx *tid_start_tx[IEEE80211_NUM_TIDS];
218         unsigned long last_addba_req_time[IEEE80211_NUM_TIDS];
219         u8 addba_req_num[IEEE80211_NUM_TIDS];
220         u8 dialog_token_allocator;
221 };
222
223
224 /**
225  * struct sta_info - STA information
226  *
227  * This structure collects information about a station that
228  * mac80211 is communicating with.
229  *
230  * @list: global linked list entry
231  * @hnext: hash table linked list pointer
232  * @local: pointer to the global information
233  * @sdata: virtual interface this station belongs to
234  * @ptk: peer key negotiated with this station, if any
235  * @gtk: group keys negotiated with this station, if any
236  * @rate_ctrl: rate control algorithm reference
237  * @rate_ctrl_priv: rate control private per-STA pointer
238  * @last_tx_rate: rate used for last transmit, to report to userspace as
239  *      "the" transmit rate
240  * @last_rx_rate_idx: rx status rate index of the last data packet
241  * @last_rx_rate_flag: rx status flag of the last data packet
242  * @last_rx_rate_vht_nss: rx status nss of last data packet
243  * @lock: used for locking all fields that require locking, see comments
244  *      in the header file.
245  * @drv_unblock_wk: used for driver PS unblocking
246  * @listen_interval: listen interval of this station, when we're acting as AP
247  * @_flags: STA flags, see &enum ieee80211_sta_info_flags, do not use directly
248  * @ps_tx_buf: buffers (per AC) of frames to transmit to this station
249  *      when it leaves power saving state or polls
250  * @tx_filtered: buffers (per AC) of frames we already tried to
251  *      transmit but were filtered by hardware due to STA having
252  *      entered power saving state, these are also delivered to
253  *      the station when it leaves powersave or polls for frames
254  * @driver_buffered_tids: bitmap of TIDs the driver has data buffered on
255  * @rx_packets: Number of MSDUs received from this STA
256  * @rx_bytes: Number of bytes received from this STA
257  * @wep_weak_iv_count: number of weak WEP IVs received from this station
258  * @last_rx: time (in jiffies) when last frame was received from this STA
259  * @last_connected: time (in seconds) when a station got connected
260  * @num_duplicates: number of duplicate frames received from this STA
261  * @rx_fragments: number of received MPDUs
262  * @rx_dropped: number of dropped MPDUs from this STA
263  * @last_signal: signal of last received frame from this STA
264  * @avg_signal: moving average of signal of received frames from this STA
265  * @last_ack_signal: signal of last received Ack frame from this STA
266  * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
267  * @tx_filtered_count: number of frames the hardware filtered for this STA
268  * @tx_retry_failed: number of frames that failed retry
269  * @tx_retry_count: total number of retries for frames to this STA
270  * @fail_avg: moving percentage of failed MSDUs
271  * @tx_packets: number of RX/TX MSDUs
272  * @tx_bytes: number of bytes transmitted to this STA
273  * @tx_fragments: number of transmitted MPDUs
274  * @tid_seq: per-TID sequence numbers for sending to this STA
275  * @ampdu_mlme: A-MPDU state machine state
276  * @timer_to_tid: identity mapping to ID timers
277  * @llid: Local link ID
278  * @plid: Peer link ID
279  * @reason: Cancel reason on PLINK_HOLDING state
280  * @plink_retries: Retries in establishment
281  * @ignore_plink_timer: ignore the peer-link timer (used internally)
282  * @plink_state: peer link state
283  * @plink_timeout: timeout of peer link
284  * @plink_timer: peer link watch timer
285  * @t_offset: timing offset relative to this host
286  * @t_offset_setpoint: reference timing offset of this sta to be used when
287  *      calculating clockdrift
288  * @local_pm: local link-specific power save mode
289  * @peer_pm: peer-specific power save mode towards local STA
290  * @nonpeer_pm: STA power save mode towards non-peer neighbors
291  * @debugfs: debug filesystem info
292  * @dead: set to true when sta is unlinked
293  * @uploaded: set to true when sta is uploaded to the driver
294  * @lost_packets: number of consecutive lost packets
295  * @sta: station information we share with the driver
296  * @sta_state: duplicates information about station state (for debug)
297  * @beacon_loss_count: number of times beacon loss has triggered
298  * @rcu_head: RCU head used for freeing this station struct
299  * @cur_max_bandwidth: maximum bandwidth to use for TX to the station,
300  *      taken from HT/VHT capabilities or VHT operating mode notification
301  * @chains: chains ever used for RX from this station
302  * @chain_signal_last: last signal (per chain)
303  * @chain_signal_avg: signal average (per chain)
304  * @known_smps_mode: the smps_mode the client thinks we are in. Relevant for
305  *      AP only.
306  */
307 struct sta_info {
308         /* General information, mostly static */
309         struct list_head list;
310         struct rcu_head rcu_head;
311         struct sta_info __rcu *hnext;
312         struct ieee80211_local *local;
313         struct ieee80211_sub_if_data *sdata;
314         struct ieee80211_key __rcu *gtk[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
315         struct ieee80211_key __rcu *ptk;
316         struct rate_control_ref *rate_ctrl;
317         void *rate_ctrl_priv;
318         spinlock_t lock;
319
320         struct work_struct drv_unblock_wk;
321
322         u16 listen_interval;
323
324         bool dead;
325
326         bool uploaded;
327
328         enum ieee80211_sta_state sta_state;
329
330         /* use the accessors defined below */
331         unsigned long _flags;
332
333         /*
334          * STA powersave frame queues, no more than the internal
335          * locking required.
336          */
337         struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS];
338         struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS];
339         unsigned long driver_buffered_tids;
340
341         /* Updated from RX path only, no locking requirements */
342         unsigned long rx_packets;
343         u64 rx_bytes;
344         unsigned long wep_weak_iv_count;
345         unsigned long last_rx;
346         long last_connected;
347         unsigned long num_duplicates;
348         unsigned long rx_fragments;
349         unsigned long rx_dropped;
350         int last_signal;
351         struct ewma avg_signal;
352         int last_ack_signal;
353
354         u8 chains;
355         s8 chain_signal_last[IEEE80211_MAX_CHAINS];
356         struct ewma chain_signal_avg[IEEE80211_MAX_CHAINS];
357
358         /* Plus 1 for non-QoS frames */
359         __le16 last_seq_ctrl[IEEE80211_NUM_TIDS + 1];
360
361         /* Updated from TX status path only, no locking requirements */
362         unsigned long tx_filtered_count;
363         unsigned long tx_retry_failed, tx_retry_count;
364         /* moving percentage of failed MSDUs */
365         unsigned int fail_avg;
366
367         /* Updated from TX path only, no locking requirements */
368         u32 tx_fragments;
369         u64 tx_packets[IEEE80211_NUM_ACS];
370         u64 tx_bytes[IEEE80211_NUM_ACS];
371         struct ieee80211_tx_rate last_tx_rate;
372         int last_rx_rate_idx;
373         u32 last_rx_rate_flag;
374         u8 last_rx_rate_vht_nss;
375         u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1];
376
377         /*
378          * Aggregation information, locked with lock.
379          */
380         struct sta_ampdu_mlme ampdu_mlme;
381         u8 timer_to_tid[IEEE80211_NUM_TIDS];
382
383 #ifdef CONFIG_MAC80211_MESH
384         /*
385          * Mesh peer link attributes
386          * TODO: move to a sub-structure that is referenced with pointer?
387          */
388         __le16 llid;
389         __le16 plid;
390         __le16 reason;
391         u8 plink_retries;
392         bool ignore_plink_timer;
393         enum nl80211_plink_state plink_state;
394         u32 plink_timeout;
395         struct timer_list plink_timer;
396         s64 t_offset;
397         s64 t_offset_setpoint;
398         /* mesh power save */
399         enum nl80211_mesh_power_mode local_pm;
400         enum nl80211_mesh_power_mode peer_pm;
401         enum nl80211_mesh_power_mode nonpeer_pm;
402 #endif
403
404 #ifdef CONFIG_MAC80211_DEBUGFS
405         struct sta_info_debugfsdentries {
406                 struct dentry *dir;
407                 bool add_has_run;
408         } debugfs;
409 #endif
410
411         enum ieee80211_sta_rx_bandwidth cur_max_bandwidth;
412
413         unsigned int lost_packets;
414         unsigned int beacon_loss_count;
415
416         enum ieee80211_smps_mode known_smps_mode;
417
418         /* keep last! */
419         struct ieee80211_sta sta;
420 };
421
422 static inline enum nl80211_plink_state sta_plink_state(struct sta_info *sta)
423 {
424 #ifdef CONFIG_MAC80211_MESH
425         return sta->plink_state;
426 #endif
427         return NL80211_PLINK_LISTEN;
428 }
429
430 static inline void set_sta_flag(struct sta_info *sta,
431                                 enum ieee80211_sta_info_flags flag)
432 {
433         WARN_ON(flag == WLAN_STA_AUTH ||
434                 flag == WLAN_STA_ASSOC ||
435                 flag == WLAN_STA_AUTHORIZED);
436         set_bit(flag, &sta->_flags);
437 }
438
439 static inline void clear_sta_flag(struct sta_info *sta,
440                                   enum ieee80211_sta_info_flags flag)
441 {
442         WARN_ON(flag == WLAN_STA_AUTH ||
443                 flag == WLAN_STA_ASSOC ||
444                 flag == WLAN_STA_AUTHORIZED);
445         clear_bit(flag, &sta->_flags);
446 }
447
448 static inline int test_sta_flag(struct sta_info *sta,
449                                 enum ieee80211_sta_info_flags flag)
450 {
451         return test_bit(flag, &sta->_flags);
452 }
453
454 static inline int test_and_clear_sta_flag(struct sta_info *sta,
455                                           enum ieee80211_sta_info_flags flag)
456 {
457         WARN_ON(flag == WLAN_STA_AUTH ||
458                 flag == WLAN_STA_ASSOC ||
459                 flag == WLAN_STA_AUTHORIZED);
460         return test_and_clear_bit(flag, &sta->_flags);
461 }
462
463 static inline int test_and_set_sta_flag(struct sta_info *sta,
464                                         enum ieee80211_sta_info_flags flag)
465 {
466         WARN_ON(flag == WLAN_STA_AUTH ||
467                 flag == WLAN_STA_ASSOC ||
468                 flag == WLAN_STA_AUTHORIZED);
469         return test_and_set_bit(flag, &sta->_flags);
470 }
471
472 int sta_info_move_state(struct sta_info *sta,
473                         enum ieee80211_sta_state new_state);
474
475 static inline void sta_info_pre_move_state(struct sta_info *sta,
476                                            enum ieee80211_sta_state new_state)
477 {
478         int ret;
479
480         WARN_ON_ONCE(test_sta_flag(sta, WLAN_STA_INSERTED));
481
482         ret = sta_info_move_state(sta, new_state);
483         WARN_ON_ONCE(ret);
484 }
485
486
487 void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
488                              struct tid_ampdu_tx *tid_tx);
489
490 static inline struct tid_ampdu_tx *
491 rcu_dereference_protected_tid_tx(struct sta_info *sta, int tid)
492 {
493         return rcu_dereference_protected(sta->ampdu_mlme.tid_tx[tid],
494                                          lockdep_is_held(&sta->lock) ||
495                                          lockdep_is_held(&sta->ampdu_mlme.mtx));
496 }
497
498 #define STA_HASH_SIZE 256
499 #define STA_HASH(sta) (sta[5])
500
501
502 /* Maximum number of frames to buffer per power saving station per AC */
503 #define STA_MAX_TX_BUFFER       64
504
505 /* Minimum buffered frame expiry time. If STA uses listen interval that is
506  * smaller than this value, the minimum value here is used instead. */
507 #define STA_TX_BUFFER_EXPIRE (10 * HZ)
508
509 /* How often station data is cleaned up (e.g., expiration of buffered frames)
510  */
511 #define STA_INFO_CLEANUP_INTERVAL (10 * HZ)
512
513 /*
514  * Get a STA info, must be under RCU read lock.
515  */
516 struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata,
517                               const u8 *addr);
518
519 struct sta_info *sta_info_get_bss(struct ieee80211_sub_if_data *sdata,
520                                   const u8 *addr);
521
522 static inline
523 void for_each_sta_info_type_check(struct ieee80211_local *local,
524                                   const u8 *addr,
525                                   struct sta_info *sta,
526                                   struct sta_info *nxt)
527 {
528 }
529
530 #define for_each_sta_info(local, _addr, _sta, nxt)                      \
531         for (   /* initialise loop */                                   \
532                 _sta = rcu_dereference(local->sta_hash[STA_HASH(_addr)]),\
533                 nxt = _sta ? rcu_dereference(_sta->hnext) : NULL;       \
534                 /* typecheck */                                         \
535                 for_each_sta_info_type_check(local, (_addr), _sta, nxt),\
536                 /* continue condition */                                \
537                 _sta;                                                   \
538                 /* advance loop */                                      \
539                 _sta = nxt,                                             \
540                 nxt = _sta ? rcu_dereference(_sta->hnext) : NULL        \
541              )                                                          \
542         /* compare address and run code only if it matches */           \
543         if (ether_addr_equal(_sta->sta.addr, (_addr)))
544
545 /*
546  * Get STA info by index, BROKEN!
547  */
548 struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata,
549                                      int idx);
550 /*
551  * Create a new STA info, caller owns returned structure
552  * until sta_info_insert().
553  */
554 struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
555                                 const u8 *addr, gfp_t gfp);
556
557 void sta_info_free(struct ieee80211_local *local, struct sta_info *sta);
558
559 /*
560  * Insert STA info into hash table/list, returns zero or a
561  * -EEXIST if (if the same MAC address is already present).
562  *
563  * Calling the non-rcu version makes the caller relinquish,
564  * the _rcu version calls read_lock_rcu() and must be called
565  * without it held.
566  */
567 int sta_info_insert(struct sta_info *sta);
568 int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU);
569
570 int __must_check __sta_info_destroy(struct sta_info *sta);
571 int sta_info_destroy_addr(struct ieee80211_sub_if_data *sdata,
572                           const u8 *addr);
573 int sta_info_destroy_addr_bss(struct ieee80211_sub_if_data *sdata,
574                               const u8 *addr);
575
576 void sta_info_recalc_tim(struct sta_info *sta);
577
578 void sta_info_init(struct ieee80211_local *local);
579 void sta_info_stop(struct ieee80211_local *local);
580 int sta_info_flush_defer(struct ieee80211_sub_if_data *sdata);
581
582 /**
583  * sta_info_flush_cleanup - flush the sta_info cleanup queue
584  * @sdata: the interface
585  *
586  * Flushes the sta_info cleanup queue for a given interface;
587  * this is necessary before the interface is removed or, for
588  * AP/mesh interfaces, before it is deconfigured.
589  *
590  * Note an rcu_barrier() must precede the function, after all
591  * stations have been flushed/removed to ensure the call_rcu()
592  * calls that add stations to the cleanup queue have completed.
593  */
594 void sta_info_flush_cleanup(struct ieee80211_sub_if_data *sdata);
595
596 /**
597  * sta_info_flush - flush matching STA entries from the STA table
598  *
599  * Returns the number of removed STA entries.
600  *
601  * @sdata: sdata to remove all stations from
602  */
603 static inline int sta_info_flush(struct ieee80211_sub_if_data *sdata)
604 {
605         int ret = sta_info_flush_defer(sdata);
606
607         rcu_barrier();
608         sta_info_flush_cleanup(sdata);
609
610         return ret;
611 }
612
613 void sta_set_rate_info_tx(struct sta_info *sta,
614                           const struct ieee80211_tx_rate *rate,
615                           struct rate_info *rinfo);
616 void sta_set_rate_info_rx(struct sta_info *sta,
617                           struct rate_info *rinfo);
618 void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
619                           unsigned long exp_time);
620 u8 sta_info_tx_streams(struct sta_info *sta);
621
622 void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta);
623 void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta);
624 void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta);
625
626 void ieee80211_cleanup_sdata_stas(struct ieee80211_sub_if_data *sdata);
627
628 #endif /* STA_INFO_H */