[MIPS] Change libgcc-style functions from lib-y to obj-y
[linux-drm-fsl-dcu.git] / lib / Kconfig.debug
1
2 config PRINTK_TIME
3         bool "Show timing information on printks"
4         depends on PRINTK
5         help
6           Selecting this option causes timing information to be
7           included in printk output.  This allows you to measure
8           the interval between kernel operations, including bootup
9           operations.  This is useful for identifying long delays
10           in kernel startup.
11
12 config ENABLE_MUST_CHECK
13         bool "Enable __must_check logic"
14         default y
15         help
16           Enable the __must_check logic in the kernel build.  Disable this to
17           suppress the "warning: ignoring return value of 'foo', declared with
18           attribute warn_unused_result" messages.
19
20 config MAGIC_SYSRQ
21         bool "Magic SysRq key"
22         depends on !UML
23         help
24           If you say Y here, you will have some control over the system even
25           if the system crashes for example during kernel debugging (e.g., you
26           will be able to flush the buffer cache to disk, reboot the system
27           immediately or dump some status information). This is accomplished
28           by pressing various keys while holding SysRq (Alt+PrintScreen). It
29           also works on a serial console (on PC hardware at least), if you
30           send a BREAK and then within 5 seconds a command keypress. The
31           keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
32           unless you really know what this hack does.
33
34 config UNUSED_SYMBOLS
35         bool "Enable unused/obsolete exported symbols"
36         default y if X86
37         help
38           Unused but exported symbols make the kernel needlessly bigger.  For
39           that reason most of these unused exports will soon be removed.  This
40           option is provided temporarily to provide a transition period in case
41           some external kernel module needs one of these symbols anyway. If you
42           encounter such a case in your module, consider if you are actually
43           using the right API.  (rationale: since nobody in the kernel is using
44           this in a module, there is a pretty good chance it's actually the
45           wrong interface to use).  If you really need the symbol, please send a
46           mail to the linux kernel mailing list mentioning the symbol and why
47           you really need it, and what the merge plan to the mainline kernel for
48           your module is.
49
50 config DEBUG_FS
51         bool "Debug Filesystem"
52         depends on SYSFS
53         help
54           debugfs is a virtual file system that kernel developers use to put
55           debugging files into.  Enable this option to be able to read and
56           write to these files.
57
58           If unsure, say N.
59
60 config HEADERS_CHECK
61         bool "Run 'make headers_check' when building vmlinux"
62         depends on !UML
63         help
64           This option will extract the user-visible kernel headers whenever
65           building the kernel, and will run basic sanity checks on them to
66           ensure that exported files do not attempt to include files which
67           were not exported, etc.
68
69           If you're making modifications to header files which are
70           relevant for userspace, say 'Y', and check the headers
71           exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in
72           your build tree), to make sure they're suitable.
73
74 config DEBUG_KERNEL
75         bool "Kernel debugging"
76         help
77           Say Y here if you are developing drivers or trying to debug and
78           identify kernel problems.
79
80 config DEBUG_SHIRQ
81         bool "Debug shared IRQ handlers"
82         depends on DEBUG_KERNEL && GENERIC_HARDIRQS
83         help
84           Enable this to generate a spurious interrupt as soon as a shared
85           interrupt handler is registered, and just before one is deregistered.
86           Drivers ought to be able to handle interrupts coming in at those
87           points; some don't and need to be caught.
88
89 config DETECT_SOFTLOCKUP
90         bool "Detect Soft Lockups"
91         depends on DEBUG_KERNEL && !S390
92         default y
93         help
94           Say Y here to enable the kernel to detect "soft lockups",
95           which are bugs that cause the kernel to loop in kernel
96           mode for more than 10 seconds, without giving other tasks a
97           chance to run.
98
99           When a soft-lockup is detected, the kernel will print the
100           current stack trace (which you should report), but the
101           system will stay locked up. This feature has negligible
102           overhead.
103
104           (Note that "hard lockups" are separate type of bugs that
105            can be detected via the NMI-watchdog, on platforms that
106            support it.)
107
108 config SCHEDSTATS
109         bool "Collect scheduler statistics"
110         depends on DEBUG_KERNEL && PROC_FS
111         help
112           If you say Y here, additional code will be inserted into the
113           scheduler and related routines to collect statistics about
114           scheduler behavior and provide them in /proc/schedstat.  These
115           stats may be useful for both tuning and debugging the scheduler
116           If you aren't debugging the scheduler or trying to tune a specific
117           application, you can say N to avoid the very slight overhead
118           this adds.
119
120 config TIMER_STATS
121         bool "Collect kernel timers statistics"
122         depends on DEBUG_KERNEL && PROC_FS
123         help
124           If you say Y here, additional code will be inserted into the
125           timer routines to collect statistics about kernel timers being
126           reprogrammed. The statistics can be read from /proc/timer_stats.
127           The statistics collection is started by writing 1 to /proc/timer_stats,
128           writing 0 stops it. This feature is useful to collect information
129           about timer usage patterns in kernel and userspace. This feature
130           is lightweight if enabled in the kernel config but not activated
131           (it defaults to deactivated on bootup and will only be activated
132           if some application like powertop activates it explicitly).
133
134 config DEBUG_SLAB
135         bool "Debug slab memory allocations"
136         depends on DEBUG_KERNEL && SLAB
137         help
138           Say Y here to have the kernel do limited verification on memory
139           allocation as well as poisoning memory on free to catch use of freed
140           memory. This can make kmalloc/kfree-intensive workloads much slower.
141
142 config DEBUG_SLAB_LEAK
143         bool "Memory leak debugging"
144         depends on DEBUG_SLAB
145
146 config DEBUG_PREEMPT
147         bool "Debug preemptible kernel"
148         depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT
149         default y
150         help
151           If you say Y here then the kernel will use a debug variant of the
152           commonly used smp_processor_id() function and will print warnings
153           if kernel code uses it in a preemption-unsafe way. Also, the kernel
154           will detect preemption count underflows.
155
156 config DEBUG_RT_MUTEXES
157         bool "RT Mutex debugging, deadlock detection"
158         depends on DEBUG_KERNEL && RT_MUTEXES
159         help
160          This allows rt mutex semantics violations and rt mutex related
161          deadlocks (lockups) to be detected and reported automatically.
162
163 config DEBUG_PI_LIST
164         bool
165         default y
166         depends on DEBUG_RT_MUTEXES
167
168 config RT_MUTEX_TESTER
169         bool "Built-in scriptable tester for rt-mutexes"
170         depends on DEBUG_KERNEL && RT_MUTEXES
171         help
172           This option enables a rt-mutex tester.
173
174 config DEBUG_SPINLOCK
175         bool "Spinlock and rw-lock debugging: basic checks"
176         depends on DEBUG_KERNEL
177         help
178           Say Y here and build SMP to catch missing spinlock initialization
179           and certain other kinds of spinlock errors commonly made.  This is
180           best used in conjunction with the NMI watchdog so that spinlock
181           deadlocks are also debuggable.
182
183 config DEBUG_MUTEXES
184         bool "Mutex debugging: basic checks"
185         depends on DEBUG_KERNEL
186         help
187          This feature allows mutex semantics violations to be detected and
188          reported.
189
190 config DEBUG_SEMAPHORE
191         bool "Semaphore debugging"
192         depends on DEBUG_KERNEL
193         depends on ALPHA || FRV
194         default n
195         help
196           If you say Y here then semaphore processing will issue lots of
197           verbose debugging messages.  If you suspect a semaphore problem or a
198           kernel hacker asks for this option then say Y.  Otherwise say N.
199
200 config DEBUG_LOCK_ALLOC
201         bool "Lock debugging: detect incorrect freeing of live locks"
202         depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
203         select DEBUG_SPINLOCK
204         select DEBUG_MUTEXES
205         select LOCKDEP
206         help
207          This feature will check whether any held lock (spinlock, rwlock,
208          mutex or rwsem) is incorrectly freed by the kernel, via any of the
209          memory-freeing routines (kfree(), kmem_cache_free(), free_pages(),
210          vfree(), etc.), whether a live lock is incorrectly reinitialized via
211          spin_lock_init()/mutex_init()/etc., or whether there is any lock
212          held during task exit.
213
214 config PROVE_LOCKING
215         bool "Lock debugging: prove locking correctness"
216         depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
217         select LOCKDEP
218         select DEBUG_SPINLOCK
219         select DEBUG_MUTEXES
220         select DEBUG_LOCK_ALLOC
221         default n
222         help
223          This feature enables the kernel to prove that all locking
224          that occurs in the kernel runtime is mathematically
225          correct: that under no circumstance could an arbitrary (and
226          not yet triggered) combination of observed locking
227          sequences (on an arbitrary number of CPUs, running an
228          arbitrary number of tasks and interrupt contexts) cause a
229          deadlock.
230
231          In short, this feature enables the kernel to report locking
232          related deadlocks before they actually occur.
233
234          The proof does not depend on how hard and complex a
235          deadlock scenario would be to trigger: how many
236          participant CPUs, tasks and irq-contexts would be needed
237          for it to trigger. The proof also does not depend on
238          timing: if a race and a resulting deadlock is possible
239          theoretically (no matter how unlikely the race scenario
240          is), it will be proven so and will immediately be
241          reported by the kernel (once the event is observed that
242          makes the deadlock theoretically possible).
243
244          If a deadlock is impossible (i.e. the locking rules, as
245          observed by the kernel, are mathematically correct), the
246          kernel reports nothing.
247
248          NOTE: this feature can also be enabled for rwlocks, mutexes
249          and rwsems - in which case all dependencies between these
250          different locking variants are observed and mapped too, and
251          the proof of observed correctness is also maintained for an
252          arbitrary combination of these separate locking variants.
253
254          For more details, see Documentation/lockdep-design.txt.
255
256 config LOCKDEP
257         bool
258         depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
259         select STACKTRACE
260         select FRAME_POINTER if !X86 && !MIPS
261         select KALLSYMS
262         select KALLSYMS_ALL
263
264 config DEBUG_LOCKDEP
265         bool "Lock dependency engine debugging"
266         depends on DEBUG_KERNEL && LOCKDEP
267         help
268           If you say Y here, the lock dependency engine will do
269           additional runtime checks to debug itself, at the price
270           of more runtime overhead.
271
272 config TRACE_IRQFLAGS
273         depends on DEBUG_KERNEL
274         bool
275         default y
276         depends on TRACE_IRQFLAGS_SUPPORT
277         depends on PROVE_LOCKING
278
279 config DEBUG_SPINLOCK_SLEEP
280         bool "Spinlock debugging: sleep-inside-spinlock checking"
281         depends on DEBUG_KERNEL
282         help
283           If you say Y here, various routines which may sleep will become very
284           noisy if they are called with a spinlock held.
285
286 config DEBUG_LOCKING_API_SELFTESTS
287         bool "Locking API boot-time self-tests"
288         depends on DEBUG_KERNEL
289         help
290           Say Y here if you want the kernel to run a short self-test during
291           bootup. The self-test checks whether common types of locking bugs
292           are detected by debugging mechanisms or not. (if you disable
293           lock debugging then those bugs wont be detected of course.)
294           The following locking APIs are covered: spinlocks, rwlocks,
295           mutexes and rwsems.
296
297 config STACKTRACE
298         bool
299         depends on DEBUG_KERNEL
300         depends on STACKTRACE_SUPPORT
301
302 config DEBUG_KOBJECT
303         bool "kobject debugging"
304         depends on DEBUG_KERNEL
305         help
306           If you say Y here, some extra kobject debugging messages will be sent
307           to the syslog. 
308
309 config DEBUG_HIGHMEM
310         bool "Highmem debugging"
311         depends on DEBUG_KERNEL && HIGHMEM
312         help
313           This options enables addition error checking for high memory systems.
314           Disable for production systems.
315
316 config DEBUG_BUGVERBOSE
317         bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED
318         depends on BUG
319         depends on ARM || ARM26 || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG || BFIN
320         default !EMBEDDED
321         help
322           Say Y here to make BUG() panics output the file name and line number
323           of the BUG call as well as the EIP and oops trace.  This aids
324           debugging but costs about 70-100K of memory.
325
326 config DEBUG_INFO
327         bool "Compile the kernel with debug info"
328         depends on DEBUG_KERNEL
329         help
330           If you say Y here the resulting kernel image will include
331           debugging info resulting in a larger kernel image.
332           This adds debug symbols to the kernel and modules (gcc -g), and
333           is needed if you intend to use kernel crashdump or binary object
334           tools like crash, kgdb, LKCD, gdb, etc on the kernel.
335           Say Y here only if you plan to debug the kernel.
336
337           If unsure, say N.
338
339 config DEBUG_VM
340         bool "Debug VM"
341         depends on DEBUG_KERNEL
342         help
343           Enable this to turn on extended checks in the virtual-memory system
344           that may impact performance.
345
346           If unsure, say N.
347
348 config DEBUG_LIST
349         bool "Debug linked list manipulation"
350         depends on DEBUG_KERNEL
351         help
352           Enable this to turn on extended checks in the linked-list
353           walking routines.
354
355           If unsure, say N.
356
357 config FRAME_POINTER
358         bool "Compile the kernel with frame pointers"
359         depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH || BFIN)
360         default y if DEBUG_INFO && UML
361         help
362           If you say Y here the resulting kernel image will be slightly larger
363           and slower, but it might give very useful debugging information on
364           some architectures or if you use external debuggers.
365           If you don't debug the kernel, you can say N.
366
367 config FORCED_INLINING
368         bool "Force gcc to inline functions marked 'inline'"
369         depends on DEBUG_KERNEL
370         default y
371         help
372           This option determines if the kernel forces gcc to inline the functions
373           developers have marked 'inline'. Doing so takes away freedom from gcc to
374           do what it thinks is best, which is desirable for the gcc 3.x series of
375           compilers. The gcc 4.x series have a rewritten inlining algorithm and
376           disabling this option will generate a smaller kernel there. Hopefully
377           this algorithm is so good that allowing gcc4 to make the decision can
378           become the default in the future, until then this option is there to
379           test gcc for this.
380
381 config RCU_TORTURE_TEST
382         tristate "torture tests for RCU"
383         depends on DEBUG_KERNEL
384         depends on m
385         default n
386         help
387           This option provides a kernel module that runs torture tests
388           on the RCU infrastructure.  The kernel module may be built
389           after the fact on the running kernel to be tested, if desired.
390
391           Say M if you want the RCU torture tests to build as a module.
392           Say N if you are unsure.
393
394 config LKDTM
395         tristate "Linux Kernel Dump Test Tool Module"
396         depends on DEBUG_KERNEL
397         depends on KPROBES
398         default n
399         help
400         This module enables testing of the different dumping mechanisms by
401         inducing system failures at predefined crash points.
402         If you don't need it: say N
403         Choose M here to compile this code as a module. The module will be
404         called lkdtm.
405
406         Documentation on how to use the module can be found in
407         drivers/misc/lkdtm.c
408
409 config FAULT_INJECTION
410         bool "Fault-injection framework"
411         depends on DEBUG_KERNEL
412         help
413           Provide fault-injection framework.
414           For more details, see Documentation/fault-injection/.
415
416 config FAILSLAB
417         bool "Fault-injection capability for kmalloc"
418         depends on FAULT_INJECTION
419         help
420           Provide fault-injection capability for kmalloc.
421
422 config FAIL_PAGE_ALLOC
423         bool "Fault-injection capabilitiy for alloc_pages()"
424         depends on FAULT_INJECTION
425         help
426           Provide fault-injection capability for alloc_pages().
427
428 config FAIL_MAKE_REQUEST
429         bool "Fault-injection capability for disk IO"
430         depends on FAULT_INJECTION
431         help
432           Provide fault-injection capability for disk IO.
433
434 config FAULT_INJECTION_DEBUG_FS
435         bool "Debugfs entries for fault-injection capabilities"
436         depends on FAULT_INJECTION && SYSFS && DEBUG_FS
437         help
438           Enable configuration of fault-injection capabilities via debugfs.
439
440 config FAULT_INJECTION_STACKTRACE_FILTER
441         bool "stacktrace filter for fault-injection capabilities"
442         depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
443         depends on !X86_64
444         select STACKTRACE
445         select FRAME_POINTER
446         help
447           Provide stacktrace filter for fault-injection capabilities