drivers/net/usb/zaurus.c

   1 /*
   2  * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
   3  * Copyright (C) 2002-2005 by David Brownell
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, see <http://www.gnu.org/licenses/>.
  17  */
  18
  19 // #define      DEBUG                   // error path messages, extra info
  20 // #define      VERBOSE                 // more; success messages
  21
  22 #include <linux/module.h>
  23 #include <linux/init.h>
  24 #include <linux/netdevice.h>
  25 #include <linux/ethtool.h>
  26 #include <linux/workqueue.h>
  27 #include <linux/mii.h>
  28 #include <linux/crc32.h>
  29 #include <linux/usb.h>
  30 #include <linux/usb/cdc.h>
  31 #include <linux/usb/usbnet.h>
  32
  33
  34 /*
  35  * All known Zaurii lie about their standards conformance.  At least
  36  * the earliest SA-1100 models lie by saying they support CDC Ethernet.
  37  * Some later models (especially PXA-25x and PXA-27x based ones) lie
  38  * and say they support CDC MDLM (for access to cell phone modems).
  39  *
  40  * There are non-Zaurus products that use these same protocols too.
  41  *
  42  * The annoying thing is that at the same time Sharp was developing
  43  * that annoying standards-breaking software, the Linux community had
  44  * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
  45  * That is, the same functionality but not violating standards.
  46  *
  47  * The CDC Ethernet nonconformance points are troublesome to hosts
  48  * with a true CDC Ethernet implementation:
  49  *   - Framing appends a CRC, which the spec says drivers "must not" do;
  50  *   - Transfers data in altsetting zero, instead of altsetting 1;
  51  *   - All these peripherals use the same ethernet address.
  52  *
  53  * The CDC MDLM nonconformance is less immediately troublesome, since all
  54  * MDLM implementations are quasi-proprietary anyway.
  55  */
  56
  57 static struct sk_buff *
  58 zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
  59 {
  60         int                     padlen;
  61         struct sk_buff          *skb2;
  62
  63         padlen = 2;
  64         if (!skb_cloned(skb)) {
  65                 int     tailroom = skb_tailroom(skb);
  66                 if ((padlen + 4) <= tailroom)
  67                         goto done;
  68         }
  69         skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
  70         dev_kfree_skb_any(skb);
  71         skb = skb2;
  72         if (skb) {
  73                 u32             fcs;
  74 done:
  75                 fcs = crc32_le(~0, skb->data, skb->len);
  76                 fcs = ~fcs;
  77
  78                 *skb_put (skb, 1) = fcs       & 0xff;
  79                 *skb_put (skb, 1) = (fcs>> 8) & 0xff;
  80                 *skb_put (skb, 1) = (fcs>>16) & 0xff;
  81                 *skb_put (skb, 1) = (fcs>>24) & 0xff;
  82         }
  83         return skb;
  84 }
  85
  86 static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
  87 {
  88         /* Belcarra's funky framing has other options; mostly
  89          * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
  90          */
  91         dev->net->hard_header_len += 6;
  92         dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
  93         return usbnet_generic_cdc_bind(dev, intf);
  94 }
  95
  96 /* PDA style devices are always connected if present */
  97 static int always_connected (struct usbnet *dev)
  98 {
  99         return 0;
 100 }
 101
 102 static const struct driver_info zaurus_sl5x00_info = {
 103         .description =  "Sharp Zaurus SL-5x00",
 104         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 105         .check_connect = always_connected,
 106         .bind =         zaurus_bind,
 107         .unbind =       usbnet_cdc_unbind,
 108         .tx_fixup =     zaurus_tx_fixup,
 109 };
 110 #define ZAURUS_STRONGARM_INFO   ((unsigned long)&zaurus_sl5x00_info)
 111
 112 static const struct driver_info zaurus_pxa_info = {
 113         .description =  "Sharp Zaurus, PXA-2xx based",
 114         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 115         .check_connect = always_connected,
 116         .bind =         zaurus_bind,
 117         .unbind =       usbnet_cdc_unbind,
 118         .tx_fixup =     zaurus_tx_fixup,
 119 };
 120 #define ZAURUS_PXA_INFO         ((unsigned long)&zaurus_pxa_info)
 121
 122 static const struct driver_info olympus_mxl_info = {
 123         .description =  "Olympus R1000",
 124         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 125         .check_connect = always_connected,
 126         .bind =         zaurus_bind,
 127         .unbind =       usbnet_cdc_unbind,
 128         .tx_fixup =     zaurus_tx_fixup,
 129 };
 130 #define OLYMPUS_MXL_INFO        ((unsigned long)&olympus_mxl_info)
 131
 132
 133 /* Some more recent products using Lineo/Belcarra code will wrongly claim
 134  * CDC MDLM conformance.  They aren't conformant:  data endpoints live
 135  * in the control interface, there's no data interface, and it's not used
 136  * to talk to a cell phone radio.  But at least we can detect these two
 137  * pseudo-classes, rather than growing this product list with entries for
 138  * each new nonconformant product (sigh).
 139  */
 140 static const u8 safe_guid[16] = {
 141         0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
 142         0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
 143 };
 144 static const u8 blan_guid[16] = {
 145         0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
 146         0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
 147 };
 148
 149 static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
 150 {
 151         u8                              *buf = intf->cur_altsetting->extra;
 152         int                             len = intf->cur_altsetting->extralen;
 153         struct usb_cdc_mdlm_desc        *desc = NULL;
 154         struct usb_cdc_mdlm_detail_desc *detail = NULL;
 155
 156         while (len > 3) {
 157                 if (buf [1] != USB_DT_CS_INTERFACE)
 158                         goto next_desc;
 159
 160                 /* use bDescriptorSubType, and just verify that we get a
 161                  * "BLAN" (or "SAFE") descriptor.
 162                  */
 163                 switch (buf [2]) {
 164                 case USB_CDC_MDLM_TYPE:
 165                         if (desc) {
 166                                 dev_dbg(&intf->dev, "extra MDLM\n");
 167                                 goto bad_desc;
 168                         }
 169                         desc = (void *) buf;
 170                         if (desc->bLength != sizeof *desc) {
 171                                 dev_dbg(&intf->dev, "MDLM len %u\n",
 172                                         desc->bLength);
 173                                 goto bad_desc;
 174                         }
 175                         /* expect bcdVersion 1.0, ignore */
 176                         if (memcmp(&desc->bGUID, blan_guid, 16) &&
 177                             memcmp(&desc->bGUID, safe_guid, 16)) {
 178                                 /* hey, this one might _really_ be MDLM! */
 179                                 dev_dbg(&intf->dev, "MDLM guid\n");
 180                                 goto bad_desc;
 181                         }
 182                         break;
 183                 case USB_CDC_MDLM_DETAIL_TYPE:
 184                         if (detail) {
 185                                 dev_dbg(&intf->dev, "extra MDLM detail\n");
 186                                 goto bad_desc;
 187                         }
 188                         detail = (void *) buf;
 189                         switch (detail->bGuidDescriptorType) {
 190                         case 0:                 /* "SAFE" */
 191                                 if (detail->bLength != (sizeof *detail + 2))
 192                                         goto bad_detail;
 193                                 break;
 194                         case 1:                 /* "BLAN" */
 195                                 if (detail->bLength != (sizeof *detail + 3))
 196                                         goto bad_detail;
 197                                 break;
 198                         default:
 199                                 goto bad_detail;
 200                         }
 201
 202                         /* assuming we either noticed BLAN already, or will
 203                          * find it soon, there are some data bytes here:
 204                          *  - bmNetworkCapabilities (unused)
 205                          *  - bmDataCapabilities (bits, see below)
 206                          *  - bPad (ignored, for PADAFTER -- BLAN-only)
 207                          * bits are:
 208                          *  - 0x01 -- Zaurus framing (add CRC)
 209                          *  - 0x02 -- PADBEFORE (CRC includes some padding)
 210                          *  - 0x04 -- PADAFTER (some padding after CRC)
 211                          *  - 0x08 -- "fermat" packet mangling (for hw bugs)
 212                          * the PADBEFORE appears not to matter; we interop
 213                          * with devices that use it and those that don't.
 214                          */
 215                         if ((detail->bDetailData[1] & ~0x02) != 0x01) {
 216                                 /* bmDataCapabilities == 0 would be fine too,
 217                                  * but framing is minidriver-coupled for now.
 218                                  */
 219 bad_detail:
 220                                 dev_dbg(&intf->dev,
 221                                                 "bad MDLM detail, %d %d %d\n",
 222                                                 detail->bLength,
 223                                                 detail->bDetailData[0],
 224                                                 detail->bDetailData[2]);
 225                                 goto bad_desc;
 226                         }
 227
 228                         /* same extra framing as for non-BLAN mode */
 229                         dev->net->hard_header_len += 6;
 230                         dev->rx_urb_size = dev->net->hard_header_len
 231                                         + dev->net->mtu;
 232                         break;
 233                 }
 234 next_desc:
 235                 len -= buf [0]; /* bLength */
 236                 buf += buf [0];
 237         }
 238
 239         if (!desc || !detail) {
 240                 dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
 241                         desc ? "" : "func ",
 242                         detail ? "" : "detail ");
 243                 goto bad_desc;
 244         }
 245
 246         /* There's probably a CDC Ethernet descriptor there, but we can't
 247          * rely on the Ethernet address it provides since not all vendors
 248          * bother to make it unique.  Likewise there's no point in tracking
 249          * of the CDC event notifications.
 250          */
 251         return usbnet_get_endpoints(dev, intf);
 252
 253 bad_desc:
 254         dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
 255         return -ENODEV;
 256 }
 257
 258 static const struct driver_info bogus_mdlm_info = {
 259         .description =  "pseudo-MDLM (BLAN) device",
 260         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 261         .check_connect = always_connected,
 262         .tx_fixup =     zaurus_tx_fixup,
 263         .bind =         blan_mdlm_bind,
 264 };
 265
 266 static const struct usb_device_id       products [] = {
 267 #define ZAURUS_MASTER_INTERFACE \
 268         .bInterfaceClass        = USB_CLASS_COMM, \
 269         .bInterfaceSubClass     = USB_CDC_SUBCLASS_ETHERNET, \
 270         .bInterfaceProtocol     = USB_CDC_PROTO_NONE
 271
 272 /* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
 273 {
 274         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 275                           | USB_DEVICE_ID_MATCH_DEVICE,
 276         .idVendor               = 0x04DD,
 277         .idProduct              = 0x8004,
 278         ZAURUS_MASTER_INTERFACE,
 279         .driver_info = ZAURUS_STRONGARM_INFO,
 280 },
 281
 282 /* PXA-2xx based models are also lying-about-cdc.  If you add any
 283  * more devices that claim to be CDC Ethernet, make sure they get
 284  * added to the blacklist in cdc_ether too.
 285  *
 286  * NOTE:  OpenZaurus versions with 2.6 kernels won't use these entries,
 287  * unlike the older ones with 2.4 "embedix" kernels.
 288  */
 289 {
 290         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 291                           | USB_DEVICE_ID_MATCH_DEVICE,
 292         .idVendor               = 0x04DD,
 293         .idProduct              = 0x8005,       /* A-300 */
 294         ZAURUS_MASTER_INTERFACE,
 295         .driver_info = ZAURUS_PXA_INFO,
 296 }, {
 297         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 298                           | USB_DEVICE_ID_MATCH_DEVICE,
 299         .idVendor               = 0x04DD,
 300         .idProduct              = 0x8006,       /* B-500/SL-5600 */
 301         ZAURUS_MASTER_INTERFACE,
 302         .driver_info = ZAURUS_PXA_INFO,
 303 }, {
 304         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 305                   | USB_DEVICE_ID_MATCH_DEVICE,
 306         .idVendor               = 0x04DD,
 307         .idProduct              = 0x8007,       /* C-700 */
 308         ZAURUS_MASTER_INTERFACE,
 309         .driver_info = ZAURUS_PXA_INFO,
 310 }, {
 311         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 312                  | USB_DEVICE_ID_MATCH_DEVICE,
 313         .idVendor               = 0x04DD,
 314         .idProduct              = 0x9031,       /* C-750 C-760 */
 315         ZAURUS_MASTER_INTERFACE,
 316         .driver_info = ZAURUS_PXA_INFO,
 317 }, {
 318         /* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */
 319         USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM,
 320                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 321         .driver_info = (unsigned long) &bogus_mdlm_info,
 322 }, {
 323         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 324                  | USB_DEVICE_ID_MATCH_DEVICE,
 325         .idVendor               = 0x04DD,
 326         .idProduct              = 0x9032,       /* SL-6000 */
 327         ZAURUS_MASTER_INTERFACE,
 328         .driver_info = ZAURUS_PXA_INFO,
 329 }, {
 330         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 331                  | USB_DEVICE_ID_MATCH_DEVICE,
 332         .idVendor               = 0x04DD,
 333         /* reported with some C860 units */
 334         .idProduct              = 0x9050,       /* C-860 */
 335         ZAURUS_MASTER_INTERFACE,
 336         .driver_info = ZAURUS_PXA_INFO,
 337 },
 338 {
 339         /* Motorola Rokr E6 */
 340         USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6027, USB_CLASS_COMM,
 341                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 342         .driver_info = (unsigned long) &bogus_mdlm_info,
 343 }, {
 344         /* Motorola MOTOMAGX phones */
 345         USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
 346                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 347         .driver_info = (unsigned long) &bogus_mdlm_info,
 348 },
 349
 350 /* Olympus has some models with a Zaurus-compatible option.
 351  * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
 352  */
 353 {
 354         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 355                  | USB_DEVICE_ID_MATCH_DEVICE,
 356         .idVendor               = 0x07B4,
 357         .idProduct              = 0x0F02,       /* R-1000 */
 358         ZAURUS_MASTER_INTERFACE,
 359         .driver_info = OLYMPUS_MXL_INFO,
 360 },
 361
 362 /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
 363 {
 364         USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
 365                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 366         .driver_info = (unsigned long) &bogus_mdlm_info,
 367 },
 368         { },            // END
 369 };
 370 MODULE_DEVICE_TABLE(usb, products);
 371
 372 static struct usb_driver zaurus_driver = {
 373         .name =         "zaurus",
 374         .id_table =     products,
 375         .probe =        usbnet_probe,
 376         .disconnect =   usbnet_disconnect,
 377         .suspend =      usbnet_suspend,
 378         .resume =       usbnet_resume,
 379         .disable_hub_initiated_lpm = 1,
 380 };
 381
 382 module_usb_driver(zaurus_driver);
 383
 384 MODULE_AUTHOR("Pavel Machek, David Brownell");
 385 MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
 386 MODULE_LICENSE("GPL");