arch/x86_64/kernel/genapic_flat.c

   1 /*
   2  * Copyright 2004 James Cleverdon, IBM.
   3  * Subject to the GNU Public License, v.2
   4  *
   5  * Flat APIC subarch code.
   6  *
   7  * Hacked for x86-64 by James Cleverdon from i386 architecture code by
   8  * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
   9  * James Cleverdon.
  10  */
  11 #include <linux/threads.h>
  12 #include <linux/cpumask.h>
  13 #include <linux/string.h>
  14 #include <linux/kernel.h>
  15 #include <linux/ctype.h>
  16 #include <linux/init.h>
  17 #include <asm/smp.h>
  18 #include <asm/ipi.h>
  19
  20 static cpumask_t flat_target_cpus(void)
  21 {
  22         return cpu_online_map;
  23 }
  24
  25 /*
  26  * Set up the logical destination ID.
  27  *
  28  * Intel recommends to set DFR, LDR and TPR before enabling
  29  * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
  30  * document number 292116).  So here it goes...
  31  */
  32 static void flat_init_apic_ldr(void)
  33 {
  34         unsigned long val;
  35         unsigned long num, id;
  36
  37         num = smp_processor_id();
  38         id = 1UL << num;
  39         x86_cpu_to_log_apicid[num] = id;
  40         apic_write(APIC_DFR, APIC_DFR_FLAT);
  41         val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
  42         val |= SET_APIC_LOGICAL_ID(id);
  43         apic_write(APIC_LDR, val);
  44 }
  45
  46 static void flat_send_IPI_mask(cpumask_t cpumask, int vector)
  47 {
  48         unsigned long mask = cpus_addr(cpumask)[0];
  49         unsigned long cfg;
  50         unsigned long flags;
  51
  52         local_save_flags(flags);
  53         local_irq_disable();
  54
  55         /*
  56          * Wait for idle.
  57          */
  58         apic_wait_icr_idle();
  59
  60         /*
  61          * prepare target chip field
  62          */
  63         cfg = __prepare_ICR2(mask);
  64         apic_write(APIC_ICR2, cfg);
  65
  66         /*
  67          * program the ICR
  68          */
  69         cfg = __prepare_ICR(0, vector, APIC_DEST_LOGICAL);
  70
  71         /*
  72          * Send the IPI. The write to APIC_ICR fires this off.
  73          */
  74         apic_write(APIC_ICR, cfg);
  75         local_irq_restore(flags);
  76 }
  77
  78 static void flat_send_IPI_allbutself(int vector)
  79 {
  80 #ifdef  CONFIG_HOTPLUG_CPU
  81         int hotplug = 1;
  82 #else
  83         int hotplug = 0;
  84 #endif
  85         if (hotplug || vector == NMI_VECTOR) {
  86                 cpumask_t allbutme = cpu_online_map;
  87
  88                 cpu_clear(smp_processor_id(), allbutme);
  89
  90                 if (!cpus_empty(allbutme))
  91                         flat_send_IPI_mask(allbutme, vector);
  92         } else if (num_online_cpus() > 1) {
  93                 __send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL);
  94         }
  95 }
  96
  97 static void flat_send_IPI_all(int vector)
  98 {
  99         if (vector == NMI_VECTOR)
 100                 flat_send_IPI_mask(cpu_online_map, vector);
 101         else
 102                 __send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
 103 }
 104
 105 static int flat_apic_id_registered(void)
 106 {
 107         return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
 108 }
 109
 110 static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask)
 111 {
 112         return cpus_addr(cpumask)[0] & APIC_ALL_CPUS;
 113 }
 114
 115 static unsigned int phys_pkg_id(int index_msb)
 116 {
 117         return hard_smp_processor_id() >> index_msb;
 118 }
 119
 120 struct genapic apic_flat =  {
 121         .name = "flat",
 122         .int_delivery_mode = dest_LowestPrio,
 123         .int_dest_mode = (APIC_DEST_LOGICAL != 0),
 124         .int_delivery_dest = APIC_DEST_LOGICAL | APIC_DM_LOWEST,
 125         .target_cpus = flat_target_cpus,
 126         .apic_id_registered = flat_apic_id_registered,
 127         .init_apic_ldr = flat_init_apic_ldr,
 128         .send_IPI_all = flat_send_IPI_all,
 129         .send_IPI_allbutself = flat_send_IPI_allbutself,
 130         .send_IPI_mask = flat_send_IPI_mask,
 131         .cpu_mask_to_apicid = flat_cpu_mask_to_apicid,
 132         .phys_pkg_id = phys_pkg_id,
 133 };
 134
 135 /*
 136  * Physflat mode is used when there are more than 8 CPUs on a AMD system.
 137  * We cannot use logical delivery in this case because the mask
 138  * overflows, so use physical mode.
 139  */
 140
 141 static cpumask_t physflat_target_cpus(void)
 142 {
 143         return cpumask_of_cpu(0);
 144 }
 145
 146 static void physflat_send_IPI_mask(cpumask_t cpumask, int vector)
 147 {
 148         send_IPI_mask_sequence(cpumask, vector);
 149 }
 150
 151 static void physflat_send_IPI_allbutself(int vector)
 152 {
 153         cpumask_t allbutme = cpu_online_map;
 154
 155         cpu_clear(smp_processor_id(), allbutme);
 156         physflat_send_IPI_mask(allbutme, vector);
 157 }
 158
 159 static void physflat_send_IPI_all(int vector)
 160 {
 161         physflat_send_IPI_mask(cpu_online_map, vector);
 162 }
 163
 164 static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
 165 {
 166         int cpu;
 167
 168         /*
 169          * We're using fixed IRQ delivery, can only return one phys APIC ID.
 170          * May as well be the first.
 171          */
 172         cpu = first_cpu(cpumask);
 173         if ((unsigned)cpu < NR_CPUS)
 174                 return x86_cpu_to_apicid[cpu];
 175         else
 176                 return BAD_APICID;
 177 }
 178
 179 struct genapic apic_physflat =  {
 180         .name = "physical flat",
 181         .int_delivery_mode = dest_Fixed,
 182         .int_dest_mode = (APIC_DEST_PHYSICAL != 0),
 183         .int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_FIXED,
 184         .target_cpus = physflat_target_cpus,
 185         .apic_id_registered = flat_apic_id_registered,
 186         .init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/
 187         .send_IPI_all = physflat_send_IPI_all,
 188         .send_IPI_allbutself = physflat_send_IPI_allbutself,
 189         .send_IPI_mask = physflat_send_IPI_mask,
 190         .cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
 191         .phys_pkg_id = phys_pkg_id,
 192 };