arch/arm/mm/mmu.c

   1 /*
   2  *  linux/arch/arm/mm/mmu.c
   3  *
   4  *  Copyright (C) 1995-2005 Russell King
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 #include <linux/module.h>
  11 #include <linux/kernel.h>
  12 #include <linux/errno.h>
  13 #include <linux/init.h>
  14 #include <linux/mman.h>
  15 #include <linux/nodemask.h>
  16 #include <linux/memblock.h>
  17 #include <linux/fs.h>
  18 #include <linux/vmalloc.h>
  19 #include <linux/sizes.h>
  20
  21 #include <asm/cp15.h>
  22 #include <asm/cputype.h>
  23 #include <asm/sections.h>
  24 #include <asm/cachetype.h>
  25 #include <asm/setup.h>
  26 #include <asm/smp_plat.h>
  27 #include <asm/tlb.h>
  28 #include <asm/highmem.h>
  29 #include <asm/system_info.h>
  30 #include <asm/traps.h>
  31
  32 #include <asm/mach/arch.h>
  33 #include <asm/mach/map.h>
  34 #include <asm/mach/pci.h>
  35
  36 #include "mm.h"
  37
  38 /*
  39  * empty_zero_page is a special page that is used for
  40  * zero-initialized data and COW.
  41  */
  42 struct page *empty_zero_page;
  43 EXPORT_SYMBOL(empty_zero_page);
  44
  45 /*
  46  * The pmd table for the upper-most set of pages.
  47  */
  48 pmd_t *top_pmd;
  49
  50 #define CPOLICY_UNCACHED        0
  51 #define CPOLICY_BUFFERED        1
  52 #define CPOLICY_WRITETHROUGH    2
  53 #define CPOLICY_WRITEBACK       3
  54 #define CPOLICY_WRITEALLOC      4
  55
  56 static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
  57 static unsigned int ecc_mask __initdata = 0;
  58 pgprot_t pgprot_user;
  59 pgprot_t pgprot_kernel;
  60 pgprot_t pgprot_hyp_device;
  61 pgprot_t pgprot_s2;
  62 pgprot_t pgprot_s2_device;
  63
  64 EXPORT_SYMBOL(pgprot_user);
  65 EXPORT_SYMBOL(pgprot_kernel);
  66
  67 struct cachepolicy {
  68         const char      policy[16];
  69         unsigned int    cr_mask;
  70         pmdval_t        pmd;
  71         pteval_t        pte;
  72         pteval_t        pte_s2;
  73 };
  74
  75 #ifdef CONFIG_ARM_LPAE
  76 #define s2_policy(policy)       policy
  77 #else
  78 #define s2_policy(policy)       0
  79 #endif
  80
  81 static struct cachepolicy cache_policies[] __initdata = {
  82         {
  83                 .policy         = "uncached",
  84                 .cr_mask        = CR_W|CR_C,
  85                 .pmd            = PMD_SECT_UNCACHED,
  86                 .pte            = L_PTE_MT_UNCACHED,
  87                 .pte_s2         = s2_policy(L_PTE_S2_MT_UNCACHED),
  88         }, {
  89                 .policy         = "buffered",
  90                 .cr_mask        = CR_C,
  91                 .pmd            = PMD_SECT_BUFFERED,
  92                 .pte            = L_PTE_MT_BUFFERABLE,
  93                 .pte_s2         = s2_policy(L_PTE_S2_MT_UNCACHED),
  94         }, {
  95                 .policy         = "writethrough",
  96                 .cr_mask        = 0,
  97                 .pmd            = PMD_SECT_WT,
  98                 .pte            = L_PTE_MT_WRITETHROUGH,
  99                 .pte_s2         = s2_policy(L_PTE_S2_MT_WRITETHROUGH),
 100         }, {
 101                 .policy         = "writeback",
 102                 .cr_mask        = 0,
 103                 .pmd            = PMD_SECT_WB,
 104                 .pte            = L_PTE_MT_WRITEBACK,
 105                 .pte_s2         = s2_policy(L_PTE_S2_MT_WRITEBACK),
 106         }, {
 107                 .policy         = "writealloc",
 108                 .cr_mask        = 0,
 109                 .pmd            = PMD_SECT_WBWA,
 110                 .pte            = L_PTE_MT_WRITEALLOC,
 111                 .pte_s2         = s2_policy(L_PTE_S2_MT_WRITEBACK),
 112         }
 113 };
 114
 115 /*
 116  * These are useful for identifying cache coherency
 117  * problems by allowing the cache or the cache and
 118  * writebuffer to be turned off.  (Note: the write
 119  * buffer should not be on and the cache off).
 120  */
 121 static int __init early_cachepolicy(char *p)
 122 {
 123         int i;
 124
 125         for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
 126                 int len = strlen(cache_policies[i].policy);
 127
 128                 if (memcmp(p, cache_policies[i].policy, len) == 0) {
 129                         cachepolicy = i;
 130                         cr_alignment &= ~cache_policies[i].cr_mask;
 131                         cr_no_alignment &= ~cache_policies[i].cr_mask;
 132                         break;
 133                 }
 134         }
 135         if (i == ARRAY_SIZE(cache_policies))
 136                 printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
 137         /*
 138          * This restriction is partly to do with the way we boot; it is
 139          * unpredictable to have memory mapped using two different sets of
 140          * memory attributes (shared, type, and cache attribs).  We can not
 141          * change these attributes once the initial assembly has setup the
 142          * page tables.
 143          */
 144         if (cpu_architecture() >= CPU_ARCH_ARMv6) {
 145                 printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n");
 146                 cachepolicy = CPOLICY_WRITEBACK;
 147         }
 148         flush_cache_all();
 149         set_cr(cr_alignment);
 150         return 0;
 151 }
 152 early_param("cachepolicy", early_cachepolicy);
 153
 154 static int __init early_nocache(char *__unused)
 155 {
 156         char *p = "buffered";
 157         printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
 158         early_cachepolicy(p);
 159         return 0;
 160 }
 161 early_param("nocache", early_nocache);
 162
 163 static int __init early_nowrite(char *__unused)
 164 {
 165         char *p = "uncached";
 166         printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
 167         early_cachepolicy(p);
 168         return 0;
 169 }
 170 early_param("nowb", early_nowrite);
 171
 172 #ifndef CONFIG_ARM_LPAE
 173 static int __init early_ecc(char *p)
 174 {
 175         if (memcmp(p, "on", 2) == 0)
 176                 ecc_mask = PMD_PROTECTION;
 177         else if (memcmp(p, "off", 3) == 0)
 178                 ecc_mask = 0;
 179         return 0;
 180 }
 181 early_param("ecc", early_ecc);
 182 #endif
 183
 184 static int __init noalign_setup(char *__unused)
 185 {
 186         cr_alignment &= ~CR_A;
 187         cr_no_alignment &= ~CR_A;
 188         set_cr(cr_alignment);
 189         return 1;
 190 }
 191 __setup("noalign", noalign_setup);
 192
 193 #ifndef CONFIG_SMP
 194 void adjust_cr(unsigned long mask, unsigned long set)
 195 {
 196         unsigned long flags;
 197
 198         mask &= ~CR_A;
 199
 200         set &= mask;
 201
 202         local_irq_save(flags);
 203
 204         cr_no_alignment = (cr_no_alignment & ~mask) | set;
 205         cr_alignment = (cr_alignment & ~mask) | set;
 206
 207         set_cr((get_cr() & ~mask) | set);
 208
 209         local_irq_restore(flags);
 210 }
 211 #endif
 212
 213 #define PROT_PTE_DEVICE         L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN
 214 #define PROT_SECT_DEVICE        PMD_TYPE_SECT|PMD_SECT_AP_WRITE
 215
 216 static struct mem_type mem_types[] = {
 217         [MT_DEVICE] = {           /* Strongly ordered / ARMv6 shared device */
 218                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
 219                                   L_PTE_SHARED,
 220                 .prot_l1        = PMD_TYPE_TABLE,
 221                 .prot_sect      = PROT_SECT_DEVICE | PMD_SECT_S,
 222                 .domain         = DOMAIN_IO,
 223         },
 224         [MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */
 225                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED,
 226                 .prot_l1        = PMD_TYPE_TABLE,
 227                 .prot_sect      = PROT_SECT_DEVICE,
 228                 .domain         = DOMAIN_IO,
 229         },
 230         [MT_DEVICE_CACHED] = {    /* ioremap_cached */
 231                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_CACHED,
 232                 .prot_l1        = PMD_TYPE_TABLE,
 233                 .prot_sect      = PROT_SECT_DEVICE | PMD_SECT_WB,
 234                 .domain         = DOMAIN_IO,
 235         },
 236         [MT_DEVICE_WC] = {      /* ioremap_wc */
 237                 .prot_pte       = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
 238                 .prot_l1        = PMD_TYPE_TABLE,
 239                 .prot_sect      = PROT_SECT_DEVICE,
 240                 .domain         = DOMAIN_IO,
 241         },
 242         [MT_UNCACHED] = {
 243                 .prot_pte       = PROT_PTE_DEVICE,
 244                 .prot_l1        = PMD_TYPE_TABLE,
 245                 .prot_sect      = PMD_TYPE_SECT | PMD_SECT_XN,
 246                 .domain         = DOMAIN_IO,
 247         },
 248         [MT_CACHECLEAN] = {
 249                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 250                 .domain    = DOMAIN_KERNEL,
 251         },
 252 #ifndef CONFIG_ARM_LPAE
 253         [MT_MINICLEAN] = {
 254                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE,
 255                 .domain    = DOMAIN_KERNEL,
 256         },
 257 #endif
 258         [MT_LOW_VECTORS] = {
 259                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 260                                 L_PTE_RDONLY,
 261                 .prot_l1   = PMD_TYPE_TABLE,
 262                 .domain    = DOMAIN_USER,
 263         },
 264         [MT_HIGH_VECTORS] = {
 265                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 266                                 L_PTE_USER | L_PTE_RDONLY,
 267                 .prot_l1   = PMD_TYPE_TABLE,
 268                 .domain    = DOMAIN_USER,
 269         },
 270         [MT_MEMORY] = {
 271                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 272                 .prot_l1   = PMD_TYPE_TABLE,
 273                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 274                 .domain    = DOMAIN_KERNEL,
 275         },
 276         [MT_ROM] = {
 277                 .prot_sect = PMD_TYPE_SECT,
 278                 .domain    = DOMAIN_KERNEL,
 279         },
 280         [MT_MEMORY_NONCACHED] = {
 281                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 282                                 L_PTE_MT_BUFFERABLE,
 283                 .prot_l1   = PMD_TYPE_TABLE,
 284                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 285                 .domain    = DOMAIN_KERNEL,
 286         },
 287         [MT_MEMORY_DTCM] = {
 288                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 289                                 L_PTE_XN,
 290                 .prot_l1   = PMD_TYPE_TABLE,
 291                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 292                 .domain    = DOMAIN_KERNEL,
 293         },
 294         [MT_MEMORY_ITCM] = {
 295                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 296                 .prot_l1   = PMD_TYPE_TABLE,
 297                 .domain    = DOMAIN_KERNEL,
 298         },
 299         [MT_MEMORY_SO] = {
 300                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 301                                 L_PTE_MT_UNCACHED | L_PTE_XN,
 302                 .prot_l1   = PMD_TYPE_TABLE,
 303                 .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
 304                                 PMD_SECT_UNCACHED | PMD_SECT_XN,
 305                 .domain    = DOMAIN_KERNEL,
 306         },
 307         [MT_MEMORY_DMA_READY] = {
 308                 .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 309                 .prot_l1   = PMD_TYPE_TABLE,
 310                 .domain    = DOMAIN_KERNEL,
 311         },
 312 };
 313
 314 const struct mem_type *get_mem_type(unsigned int type)
 315 {
 316         return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
 317 }
 318 EXPORT_SYMBOL(get_mem_type);
 319
 320 /*
 321  * Adjust the PMD section entries according to the CPU in use.
 322  */
 323 static void __init build_mem_type_table(void)
 324 {
 325         struct cachepolicy *cp;
 326         unsigned int cr = get_cr();
 327         pteval_t user_pgprot, kern_pgprot, vecs_pgprot;
 328         pteval_t hyp_device_pgprot, s2_pgprot, s2_device_pgprot;
 329         int cpu_arch = cpu_architecture();
 330         int i;
 331
 332         if (cpu_arch < CPU_ARCH_ARMv6) {
 333 #if defined(CONFIG_CPU_DCACHE_DISABLE)
 334                 if (cachepolicy > CPOLICY_BUFFERED)
 335                         cachepolicy = CPOLICY_BUFFERED;
 336 #elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
 337                 if (cachepolicy > CPOLICY_WRITETHROUGH)
 338                         cachepolicy = CPOLICY_WRITETHROUGH;
 339 #endif
 340         }
 341         if (cpu_arch < CPU_ARCH_ARMv5) {
 342                 if (cachepolicy >= CPOLICY_WRITEALLOC)
 343                         cachepolicy = CPOLICY_WRITEBACK;
 344                 ecc_mask = 0;
 345         }
 346         if (is_smp())
 347                 cachepolicy = CPOLICY_WRITEALLOC;
 348
 349         /*
 350          * Strip out features not present on earlier architectures.
 351          * Pre-ARMv5 CPUs don't have TEX bits.  Pre-ARMv6 CPUs or those
 352          * without extended page tables don't have the 'Shared' bit.
 353          */
 354         if (cpu_arch < CPU_ARCH_ARMv5)
 355                 for (i = 0; i < ARRAY_SIZE(mem_types); i++)
 356                         mem_types[i].prot_sect &= ~PMD_SECT_TEX(7);
 357         if ((cpu_arch < CPU_ARCH_ARMv6 || !(cr & CR_XP)) && !cpu_is_xsc3())
 358                 for (i = 0; i < ARRAY_SIZE(mem_types); i++)
 359                         mem_types[i].prot_sect &= ~PMD_SECT_S;
 360
 361         /*
 362          * ARMv5 and lower, bit 4 must be set for page tables (was: cache
 363          * "update-able on write" bit on ARM610).  However, Xscale and
 364          * Xscale3 require this bit to be cleared.
 365          */
 366         if (cpu_is_xscale() || cpu_is_xsc3()) {
 367                 for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 368                         mem_types[i].prot_sect &= ~PMD_BIT4;
 369                         mem_types[i].prot_l1 &= ~PMD_BIT4;
 370                 }
 371         } else if (cpu_arch < CPU_ARCH_ARMv6) {
 372                 for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 373                         if (mem_types[i].prot_l1)
 374                                 mem_types[i].prot_l1 |= PMD_BIT4;
 375                         if (mem_types[i].prot_sect)
 376                                 mem_types[i].prot_sect |= PMD_BIT4;
 377                 }
 378         }
 379
 380         /*
 381          * Mark the device areas according to the CPU/architecture.
 382          */
 383         if (cpu_is_xsc3() || (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP))) {
 384                 if (!cpu_is_xsc3()) {
 385                         /*
 386                          * Mark device regions on ARMv6+ as execute-never
 387                          * to prevent speculative instruction fetches.
 388                          */
 389                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_XN;
 390                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN;
 391                         mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN;
 392                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN;
 393                 }
 394                 if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 395                         /*
 396                          * For ARMv7 with TEX remapping,
 397                          * - shared device is SXCB=1100
 398                          * - nonshared device is SXCB=0100
 399                          * - write combine device mem is SXCB=0001
 400                          * (Uncached Normal memory)
 401                          */
 402                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1);
 403                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(1);
 404                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
 405                 } else if (cpu_is_xsc3()) {
 406                         /*
 407                          * For Xscale3,
 408                          * - shared device is TEXCB=00101
 409                          * - nonshared device is TEXCB=01000
 410                          * - write combine device mem is TEXCB=00100
 411                          * (Inner/Outer Uncacheable in xsc3 parlance)
 412                          */
 413                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1) | PMD_SECT_BUFFERED;
 414                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
 415                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
 416                 } else {
 417                         /*
 418                          * For ARMv6 and ARMv7 without TEX remapping,
 419                          * - shared device is TEXCB=00001
 420                          * - nonshared device is TEXCB=01000
 421                          * - write combine device mem is TEXCB=00100
 422                          * (Uncached Normal in ARMv6 parlance).
 423                          */
 424                         mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
 425                         mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
 426                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
 427                 }
 428         } else {
 429                 /*
 430                  * On others, write combining is "Uncached/Buffered"
 431                  */
 432                 mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
 433         }
 434
 435         /*
 436          * Now deal with the memory-type mappings
 437          */
 438         cp = &cache_policies[cachepolicy];
 439         vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
 440         s2_pgprot = cp->pte_s2;
 441         hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte;
 442
 443         /*
 444          * ARMv6 and above have extended page tables.
 445          */
 446         if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
 447 #ifndef CONFIG_ARM_LPAE
 448                 /*
 449                  * Mark cache clean areas and XIP ROM read only
 450                  * from SVC mode and no access from userspace.
 451                  */
 452                 mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 453                 mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 454                 mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 455 #endif
 456
 457                 if (is_smp()) {
 458                         /*
 459                          * Mark memory with the "shared" attribute
 460                          * for SMP systems
 461                          */
 462                         user_pgprot |= L_PTE_SHARED;
 463                         kern_pgprot |= L_PTE_SHARED;
 464                         vecs_pgprot |= L_PTE_SHARED;
 465                         s2_pgprot |= L_PTE_SHARED;
 466                         mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
 467                         mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
 468                         mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
 469                         mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
 470                         mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
 471                         mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
 472                         mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 473                         mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
 474                         mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 475                 }
 476         }
 477
 478         /*
 479          * Non-cacheable Normal - intended for memory areas that must
 480          * not cause dirty cache line writebacks when used
 481          */
 482         if (cpu_arch >= CPU_ARCH_ARMv6) {
 483                 if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 484                         /* Non-cacheable Normal is XCB = 001 */
 485                         mem_types[MT_MEMORY_NONCACHED].prot_sect |=
 486                                 PMD_SECT_BUFFERED;
 487                 } else {
 488                         /* For both ARMv6 and non-TEX-remapping ARMv7 */
 489                         mem_types[MT_MEMORY_NONCACHED].prot_sect |=
 490                                 PMD_SECT_TEX(1);
 491                 }
 492         } else {
 493                 mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
 494         }
 495
 496 #ifdef CONFIG_ARM_LPAE
 497         /*
 498          * Do not generate access flag faults for the kernel mappings.
 499          */
 500         for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 501                 mem_types[i].prot_pte |= PTE_EXT_AF;
 502                 if (mem_types[i].prot_sect)
 503                         mem_types[i].prot_sect |= PMD_SECT_AF;
 504         }
 505         kern_pgprot |= PTE_EXT_AF;
 506         vecs_pgprot |= PTE_EXT_AF;
 507 #endif
 508
 509         for (i = 0; i < 16; i++) {
 510                 pteval_t v = pgprot_val(protection_map[i]);
 511                 protection_map[i] = __pgprot(v | user_pgprot);
 512         }
 513
 514         mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot;
 515         mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot;
 516
 517         pgprot_user   = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
 518         pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
 519                                  L_PTE_DIRTY | kern_pgprot);
 520         pgprot_s2  = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | s2_pgprot);
 521         pgprot_s2_device  = __pgprot(s2_device_pgprot);
 522         pgprot_hyp_device  = __pgprot(hyp_device_pgprot);
 523
 524         mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
 525         mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
 526         mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
 527         mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
 528         mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
 529         mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
 530         mem_types[MT_ROM].prot_sect |= cp->pmd;
 531
 532         switch (cp->pmd) {
 533         case PMD_SECT_WT:
 534                 mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
 535                 break;
 536         case PMD_SECT_WB:
 537         case PMD_SECT_WBWA:
 538                 mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
 539                 break;
 540         }
 541         printk("Memory policy: ECC %sabled, Data cache %s\n",
 542                 ecc_mask ? "en" : "dis", cp->policy);
 543
 544         for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 545                 struct mem_type *t = &mem_types[i];
 546                 if (t->prot_l1)
 547                         t->prot_l1 |= PMD_DOMAIN(t->domain);
 548                 if (t->prot_sect)
 549                         t->prot_sect |= PMD_DOMAIN(t->domain);
 550         }
 551 }
 552
 553 #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 554 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 555                               unsigned long size, pgprot_t vma_prot)
 556 {
 557         if (!pfn_valid(pfn))
 558                 return pgprot_noncached(vma_prot);
 559         else if (file->f_flags & O_SYNC)
 560                 return pgprot_writecombine(vma_prot);
 561         return vma_prot;
 562 }
 563 EXPORT_SYMBOL(phys_mem_access_prot);
 564 #endif
 565
 566 #define vectors_base()  (vectors_high() ? 0xffff0000 : 0)
 567
 568 static void __init *early_alloc_aligned(unsigned long sz, unsigned long align)
 569 {
 570         void *ptr = __va(memblock_alloc(sz, align));
 571         memset(ptr, 0, sz);
 572         return ptr;
 573 }
 574
 575 static void __init *early_alloc(unsigned long sz)
 576 {
 577         return early_alloc_aligned(sz, sz);
 578 }
 579
 580 static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
 581 {
 582         if (pmd_none(*pmd)) {
 583                 pte_t *pte = early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
 584                 __pmd_populate(pmd, __pa(pte), prot);
 585         }
 586         BUG_ON(pmd_bad(*pmd));
 587         return pte_offset_kernel(pmd, addr);
 588 }
 589
 590 static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 591                                   unsigned long end, unsigned long pfn,
 592                                   const struct mem_type *type)
 593 {
 594         pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
 595         do {
 596                 set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
 597                 pfn++;
 598         } while (pte++, addr += PAGE_SIZE, addr != end);
 599 }
 600
 601 static void __init alloc_init_section(pud_t *pud, unsigned long addr,
 602                                       unsigned long end, phys_addr_t phys,
 603                                       const struct mem_type *type)
 604 {
 605         pmd_t *pmd = pmd_offset(pud, addr);
 606
 607         /*
 608          * Try a section mapping - end, addr and phys must all be aligned
 609          * to a section boundary.  Note that PMDs refer to the individual
 610          * L1 entries, whereas PGDs refer to a group of L1 entries making
 611          * up one logical pointer to an L2 table.
 612          */
 613         if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
 614                 pmd_t *p = pmd;
 615
 616 #ifndef CONFIG_ARM_LPAE
 617                 if (addr & SECTION_SIZE)
 618                         pmd++;
 619 #endif
 620
 621                 do {
 622                         *pmd = __pmd(phys | type->prot_sect);
 623                         phys += SECTION_SIZE;
 624                 } while (pmd++, addr += SECTION_SIZE, addr != end);
 625
 626                 flush_pmd_entry(p);
 627         } else {
 628                 /*
 629                  * No need to loop; pte's aren't interested in the
 630                  * individual L1 entries.
 631                  */
 632                 alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
 633         }
 634 }
 635
 636 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
 637         unsigned long end, unsigned long phys, const struct mem_type *type)
 638 {
 639         pud_t *pud = pud_offset(pgd, addr);
 640         unsigned long next;
 641
 642         do {
 643                 next = pud_addr_end(addr, end);
 644                 alloc_init_section(pud, addr, next, phys, type);
 645                 phys += next - addr;
 646         } while (pud++, addr = next, addr != end);
 647 }
 648
 649 #ifndef CONFIG_ARM_LPAE
 650 static void __init create_36bit_mapping(struct map_desc *md,
 651                                         const struct mem_type *type)
 652 {
 653         unsigned long addr, length, end;
 654         phys_addr_t phys;
 655         pgd_t *pgd;
 656
 657         addr = md->virtual;
 658         phys = __pfn_to_phys(md->pfn);
 659         length = PAGE_ALIGN(md->length);
 660
 661         if (!(cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())) {
 662                 printk(KERN_ERR "MM: CPU does not support supersection "
 663                        "mapping for 0x%08llx at 0x%08lx\n",
 664                        (long long)__pfn_to_phys((u64)md->pfn), addr);
 665                 return;
 666         }
 667
 668         /* N.B. ARMv6 supersections are only defined to work with domain 0.
 669          *      Since domain assignments can in fact be arbitrary, the
 670          *      'domain == 0' check below is required to insure that ARMv6
 671          *      supersections are only allocated for domain 0 regardless
 672          *      of the actual domain assignments in use.
 673          */
 674         if (type->domain) {
 675                 printk(KERN_ERR "MM: invalid domain in supersection "
 676                        "mapping for 0x%08llx at 0x%08lx\n",
 677                        (long long)__pfn_to_phys((u64)md->pfn), addr);
 678                 return;
 679         }
 680
 681         if ((addr | length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) {
 682                 printk(KERN_ERR "MM: cannot create mapping for 0x%08llx"
 683                        " at 0x%08lx invalid alignment\n",
 684                        (long long)__pfn_to_phys((u64)md->pfn), addr);
 685                 return;
 686         }
 687
 688         /*
 689          * Shift bits [35:32] of address into bits [23:20] of PMD
 690          * (See ARMv6 spec).
 691          */
 692         phys |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
 693
 694         pgd = pgd_offset_k(addr);
 695         end = addr + length;
 696         do {
 697                 pud_t *pud = pud_offset(pgd, addr);
 698                 pmd_t *pmd = pmd_offset(pud, addr);
 699                 int i;
 700
 701                 for (i = 0; i < 16; i++)
 702                         *pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER);
 703
 704                 addr += SUPERSECTION_SIZE;
 705                 phys += SUPERSECTION_SIZE;
 706                 pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT;
 707         } while (addr != end);
 708 }
 709 #endif  /* !CONFIG_ARM_LPAE */
 710
 711 /*
 712  * Create the page directory entries and any necessary
 713  * page tables for the mapping specified by `md'.  We
 714  * are able to cope here with varying sizes and address
 715  * offsets, and we take full advantage of sections and
 716  * supersections.
 717  */
 718 static void __init create_mapping(struct map_desc *md)
 719 {
 720         unsigned long addr, length, end;
 721         phys_addr_t phys;
 722         const struct mem_type *type;
 723         pgd_t *pgd;
 724
 725         if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
 726                 printk(KERN_WARNING "BUG: not creating mapping for 0x%08llx"
 727                        " at 0x%08lx in user region\n",
 728                        (long long)__pfn_to_phys((u64)md->pfn), md->virtual);
 729                 return;
 730         }
 731
 732         if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
 733             md->virtual >= PAGE_OFFSET &&
 734             (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
 735                 printk(KERN_WARNING "BUG: mapping for 0x%08llx"
 736                        " at 0x%08lx out of vmalloc space\n",
 737                        (long long)__pfn_to_phys((u64)md->pfn), md->virtual);
 738         }
 739
 740         type = &mem_types[md->type];
 741
 742 #ifndef CONFIG_ARM_LPAE
 743         /*
 744          * Catch 36-bit addresses
 745          */
 746         if (md->pfn >= 0x100000) {
 747                 create_36bit_mapping(md, type);
 748                 return;
 749         }
 750 #endif
 751
 752         addr = md->virtual & PAGE_MASK;
 753         phys = __pfn_to_phys(md->pfn);
 754         length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
 755
 756         if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
 757                 printk(KERN_WARNING "BUG: map for 0x%08llx at 0x%08lx can not "
 758                        "be mapped using pages, ignoring.\n",
 759                        (long long)__pfn_to_phys(md->pfn), addr);
 760                 return;
 761         }
 762
 763         pgd = pgd_offset_k(addr);
 764         end = addr + length;
 765         do {
 766                 unsigned long next = pgd_addr_end(addr, end);
 767
 768                 alloc_init_pud(pgd, addr, next, phys, type);
 769
 770                 phys += next - addr;
 771                 addr = next;
 772         } while (pgd++, addr != end);
 773 }
 774
 775 /*
 776  * Create the architecture specific mappings
 777  */
 778 void __init iotable_init(struct map_desc *io_desc, int nr)
 779 {
 780         struct map_desc *md;
 781         struct vm_struct *vm;
 782         struct static_vm *svm;
 783
 784         if (!nr)
 785                 return;
 786
 787         svm = early_alloc_aligned(sizeof(*svm) * nr, __alignof__(*svm));
 788
 789         for (md = io_desc; nr; md++, nr--) {
 790                 create_mapping(md);
 791
 792                 vm = &svm->vm;
 793                 vm->addr = (void *)(md->virtual & PAGE_MASK);
 794                 vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
 795                 vm->phys_addr = __pfn_to_phys(md->pfn);
 796                 vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
 797                 vm->flags |= VM_ARM_MTYPE(md->type);
 798                 vm->caller = iotable_init;
 799                 add_static_vm_early(svm++);
 800         }
 801 }
 802
 803 void __init vm_reserve_area_early(unsigned long addr, unsigned long size,
 804                                   void *caller)
 805 {
 806         struct vm_struct *vm;
 807         struct static_vm *svm;
 808
 809         svm = early_alloc_aligned(sizeof(*svm), __alignof__(*svm));
 810
 811         vm = &svm->vm;
 812         vm->addr = (void *)addr;
 813         vm->size = size;
 814         vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
 815         vm->caller = caller;
 816         add_static_vm_early(svm);
 817 }
 818
 819 #ifndef CONFIG_ARM_LPAE
 820
 821 /*
 822  * The Linux PMD is made of two consecutive section entries covering 2MB
 823  * (see definition in include/asm/pgtable-2level.h).  However a call to
 824  * create_mapping() may optimize static mappings by using individual
 825  * 1MB section mappings.  This leaves the actual PMD potentially half
 826  * initialized if the top or bottom section entry isn't used, leaving it
 827  * open to problems if a subsequent ioremap() or vmalloc() tries to use
 828  * the virtual space left free by that unused section entry.
 829  *
 830  * Let's avoid the issue by inserting dummy vm entries covering the unused
 831  * PMD halves once the static mappings are in place.
 832  */
 833
 834 static void __init pmd_empty_section_gap(unsigned long addr)
 835 {
 836         vm_reserve_area_early(addr, SECTION_SIZE, pmd_empty_section_gap);
 837 }
 838
 839 static void __init fill_pmd_gaps(void)
 840 {
 841         struct static_vm *svm;
 842         struct vm_struct *vm;
 843         unsigned long addr, next = 0;
 844         pmd_t *pmd;
 845
 846         list_for_each_entry(svm, &static_vmlist, list) {
 847                 vm = &svm->vm;
 848                 addr = (unsigned long)vm->addr;
 849                 if (addr < next)
 850                         continue;
 851
 852                 /*
 853                  * Check if this vm starts on an odd section boundary.
 854                  * If so and the first section entry for this PMD is free
 855                  * then we block the corresponding virtual address.
 856                  */
 857                 if ((addr & ~PMD_MASK) == SECTION_SIZE) {
 858                         pmd = pmd_off_k(addr);
 859                         if (pmd_none(*pmd))
 860                                 pmd_empty_section_gap(addr & PMD_MASK);
 861                 }
 862
 863                 /*
 864                  * Then check if this vm ends on an odd section boundary.
 865                  * If so and the second section entry for this PMD is empty
 866                  * then we block the corresponding virtual address.
 867                  */
 868                 addr += vm->size;
 869                 if ((addr & ~PMD_MASK) == SECTION_SIZE) {
 870                         pmd = pmd_off_k(addr) + 1;
 871                         if (pmd_none(*pmd))
 872                                 pmd_empty_section_gap(addr);
 873                 }
 874
 875                 /* no need to look at any vm entry until we hit the next PMD */
 876                 next = (addr + PMD_SIZE - 1) & PMD_MASK;
 877         }
 878 }
 879
 880 #else
 881 #define fill_pmd_gaps() do { } while (0)
 882 #endif
 883
 884 #if defined(CONFIG_PCI) && !defined(CONFIG_NEED_MACH_IO_H)
 885 static void __init pci_reserve_io(void)
 886 {
 887         struct static_vm *svm;
 888
 889         svm = find_static_vm_vaddr((void *)PCI_IO_VIRT_BASE);
 890         if (svm)
 891                 return;
 892
 893         vm_reserve_area_early(PCI_IO_VIRT_BASE, SZ_2M, pci_reserve_io);
 894 }
 895 #else
 896 #define pci_reserve_io() do { } while (0)
 897 #endif
 898
 899 #ifdef CONFIG_DEBUG_LL
 900 void __init debug_ll_io_init(void)
 901 {
 902         struct map_desc map;
 903
 904         debug_ll_addr(&map.pfn, &map.virtual);
 905         if (!map.pfn || !map.virtual)
 906                 return;
 907         map.pfn = __phys_to_pfn(map.pfn);
 908         map.virtual &= PAGE_MASK;
 909         map.length = PAGE_SIZE;
 910         map.type = MT_DEVICE;
 911         create_mapping(&map);
 912 }
 913 #endif
 914
 915 static void * __initdata vmalloc_min =
 916         (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
 917
 918 /*
 919  * vmalloc=size forces the vmalloc area to be exactly 'size'
 920  * bytes. This can be used to increase (or decrease) the vmalloc
 921  * area - the default is 240m.
 922  */
 923 static int __init early_vmalloc(char *arg)
 924 {
 925         unsigned long vmalloc_reserve = memparse(arg, NULL);
 926
 927         if (vmalloc_reserve < SZ_16M) {
 928                 vmalloc_reserve = SZ_16M;
 929                 printk(KERN_WARNING
 930                         "vmalloc area too small, limiting to %luMB\n",
 931                         vmalloc_reserve >> 20);
 932         }
 933
 934         if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
 935                 vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
 936                 printk(KERN_WARNING
 937                         "vmalloc area is too big, limiting to %luMB\n",
 938                         vmalloc_reserve >> 20);
 939         }
 940
 941         vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
 942         return 0;
 943 }
 944 early_param("vmalloc", early_vmalloc);
 945
 946 phys_addr_t arm_lowmem_limit __initdata = 0;
 947
 948 void __init sanity_check_meminfo(void)
 949 {
 950         int i, j, highmem = 0;
 951
 952         for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
 953                 struct membank *bank = &meminfo.bank[j];
 954                 *bank = meminfo.bank[i];
 955
 956                 if (bank->start > ULONG_MAX)
 957                         highmem = 1;
 958
 959 #ifdef CONFIG_HIGHMEM
 960                 if (__va(bank->start) >= vmalloc_min ||
 961                     __va(bank->start) < (void *)PAGE_OFFSET)
 962                         highmem = 1;
 963
 964                 bank->highmem = highmem;
 965
 966                 /*
 967                  * Split those memory banks which are partially overlapping
 968                  * the vmalloc area greatly simplifying things later.
 969                  */
 970                 if (!highmem && __va(bank->start) < vmalloc_min &&
 971                     bank->size > vmalloc_min - __va(bank->start)) {
 972                         if (meminfo.nr_banks >= NR_BANKS) {
 973                                 printk(KERN_CRIT "NR_BANKS too low, "
 974                                                  "ignoring high memory\n");
 975                         } else {
 976                                 memmove(bank + 1, bank,
 977                                         (meminfo.nr_banks - i) * sizeof(*bank));
 978                                 meminfo.nr_banks++;
 979                                 i++;
 980                                 bank[1].size -= vmalloc_min - __va(bank->start);
 981                                 bank[1].start = __pa(vmalloc_min - 1) + 1;
 982                                 bank[1].highmem = highmem = 1;
 983                                 j++;
 984                         }
 985                         bank->size = vmalloc_min - __va(bank->start);
 986                 }
 987 #else
 988                 bank->highmem = highmem;
 989
 990                 /*
 991                  * Highmem banks not allowed with !CONFIG_HIGHMEM.
 992                  */
 993                 if (highmem) {
 994                         printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
 995                                "(!CONFIG_HIGHMEM).\n",
 996                                (unsigned long long)bank->start,
 997                                (unsigned long long)bank->start + bank->size - 1);
 998                         continue;
 999                 }
1000
1001                 /*
1002                  * Check whether this memory bank would entirely overlap
1003                  * the vmalloc area.
1004                  */
1005                 if (__va(bank->start) >= vmalloc_min ||
1006                     __va(bank->start) < (void *)PAGE_OFFSET) {
1007                         printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
1008                                "(vmalloc region overlap).\n",
1009                                (unsigned long long)bank->start,
1010                                (unsigned long long)bank->start + bank->size - 1);
1011                         continue;
1012                 }
1013
1014                 /*
1015                  * Check whether this memory bank would partially overlap
1016                  * the vmalloc area.
1017                  */
1018                 if (__va(bank->start + bank->size - 1) >= vmalloc_min ||
1019                     __va(bank->start + bank->size - 1) <= __va(bank->start)) {
1020                         unsigned long newsize = vmalloc_min - __va(bank->start);
1021                         printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
1022                                "to -%.8llx (vmalloc region overlap).\n",
1023                                (unsigned long long)bank->start,
1024                                (unsigned long long)bank->start + bank->size - 1,
1025                                (unsigned long long)bank->start + newsize - 1);
1026                         bank->size = newsize;
1027                 }
1028 #endif
1029                 if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit)
1030                         arm_lowmem_limit = bank->start + bank->size;
1031
1032                 j++;
1033         }
1034 #ifdef CONFIG_HIGHMEM
1035         if (highmem) {
1036                 const char *reason = NULL;
1037
1038                 if (cache_is_vipt_aliasing()) {
1039                         /*
1040                          * Interactions between kmap and other mappings
1041                          * make highmem support with aliasing VIPT caches
1042                          * rather difficult.
1043                          */
1044                         reason = "with VIPT aliasing cache";
1045                 }
1046                 if (reason) {
1047                         printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
1048                                 reason);
1049                         while (j > 0 && meminfo.bank[j - 1].highmem)
1050                                 j--;
1051                 }
1052         }
1053 #endif
1054         meminfo.nr_banks = j;
1055         high_memory = __va(arm_lowmem_limit - 1) + 1;
1056         memblock_set_current_limit(arm_lowmem_limit);
1057 }
1058
1059 static inline void prepare_page_table(void)
1060 {
1061         unsigned long addr;
1062         phys_addr_t end;
1063
1064         /*
1065          * Clear out all the mappings below the kernel image.
1066          */
1067         for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE)
1068                 pmd_clear(pmd_off_k(addr));
1069
1070 #ifdef CONFIG_XIP_KERNEL
1071         /* The XIP kernel is mapped in the module area -- skip over it */
1072         addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
1073 #endif
1074         for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
1075                 pmd_clear(pmd_off_k(addr));
1076
1077         /*
1078          * Find the end of the first block of lowmem.
1079          */
1080         end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
1081         if (end >= arm_lowmem_limit)
1082                 end = arm_lowmem_limit;
1083
1084         /*
1085          * Clear out all the kernel space mappings, except for the first
1086          * memory bank, up to the vmalloc region.
1087          */
1088         for (addr = __phys_to_virt(end);
1089              addr < VMALLOC_START; addr += PMD_SIZE)
1090                 pmd_clear(pmd_off_k(addr));
1091 }
1092
1093 #ifdef CONFIG_ARM_LPAE
1094 /* the first page is reserved for pgd */
1095 #define SWAPPER_PG_DIR_SIZE     (PAGE_SIZE + \
1096                                  PTRS_PER_PGD * PTRS_PER_PMD * sizeof(pmd_t))
1097 #else
1098 #define SWAPPER_PG_DIR_SIZE     (PTRS_PER_PGD * sizeof(pgd_t))
1099 #endif
1100
1101 /*
1102  * Reserve the special regions of memory
1103  */
1104 void __init arm_mm_memblock_reserve(void)
1105 {
1106         /*
1107          * Reserve the page tables.  These are already in use,
1108          * and can only be in node 0.
1109          */
1110         memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE);
1111
1112 #ifdef CONFIG_SA1111
1113         /*
1114          * Because of the SA1111 DMA bug, we want to preserve our
1115          * precious DMA-able memory...
1116          */
1117         memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
1118 #endif
1119 }
1120
1121 /*
1122  * Set up the device mappings.  Since we clear out the page tables for all
1123  * mappings above VMALLOC_START, we will remove any debug device mappings.
1124  * This means you have to be careful how you debug this function, or any
1125  * called function.  This means you can't use any function or debugging
1126  * method which may touch any device, otherwise the kernel _will_ crash.
1127  */
1128 static void __init devicemaps_init(struct machine_desc *mdesc)
1129 {
1130         struct map_desc map;
1131         unsigned long addr;
1132         void *vectors;
1133
1134         /*
1135          * Allocate the vector page early.
1136          */
1137         vectors = early_alloc(PAGE_SIZE);
1138
1139         early_trap_init(vectors);
1140
1141         for (addr = VMALLOC_START; addr; addr += PMD_SIZE)
1142                 pmd_clear(pmd_off_k(addr));
1143
1144         /*
1145          * Map the kernel if it is XIP.
1146          * It is always first in the modulearea.
1147          */
1148 #ifdef CONFIG_XIP_KERNEL
1149         map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
1150         map.virtual = MODULES_VADDR;
1151         map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
1152         map.type = MT_ROM;
1153         create_mapping(&map);
1154 #endif
1155
1156         /*
1157          * Map the cache flushing regions.
1158          */
1159 #ifdef FLUSH_BASE
1160         map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
1161         map.virtual = FLUSH_BASE;
1162         map.length = SZ_1M;
1163         map.type = MT_CACHECLEAN;
1164         create_mapping(&map);
1165 #endif
1166 #ifdef FLUSH_BASE_MINICACHE
1167         map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
1168         map.virtual = FLUSH_BASE_MINICACHE;
1169         map.length = SZ_1M;
1170         map.type = MT_MINICLEAN;
1171         create_mapping(&map);
1172 #endif
1173
1174         /*
1175          * Create a mapping for the machine vectors at the high-vectors
1176          * location (0xffff0000).  If we aren't using high-vectors, also
1177          * create a mapping at the low-vectors virtual address.
1178          */
1179         map.pfn = __phys_to_pfn(virt_to_phys(vectors));
1180         map.virtual = 0xffff0000;
1181         map.length = PAGE_SIZE;
1182         map.type = MT_HIGH_VECTORS;
1183         create_mapping(&map);
1184
1185         if (!vectors_high()) {
1186                 map.virtual = 0;
1187                 map.type = MT_LOW_VECTORS;
1188                 create_mapping(&map);
1189         }
1190
1191         /*
1192          * Ask the machine support to map in the statically mapped devices.
1193          */
1194         if (mdesc->map_io)
1195                 mdesc->map_io();
1196         fill_pmd_gaps();
1197
1198         /* Reserve fixed i/o space in VMALLOC region */
1199         pci_reserve_io();
1200
1201         /*
1202          * Finally flush the caches and tlb to ensure that we're in a
1203          * consistent state wrt the writebuffer.  This also ensures that
1204          * any write-allocated cache lines in the vector page are written
1205          * back.  After this point, we can start to touch devices again.
1206          */
1207         local_flush_tlb_all();
1208         flush_cache_all();
1209 }
1210
1211 static void __init kmap_init(void)
1212 {
1213 #ifdef CONFIG_HIGHMEM
1214         pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE),
1215                 PKMAP_BASE, _PAGE_KERNEL_TABLE);
1216 #endif
1217 }
1218
1219 static void __init map_lowmem(void)
1220 {
1221         struct memblock_region *reg;
1222
1223         /* Map all the lowmem memory banks. */
1224         for_each_memblock(memory, reg) {
1225                 phys_addr_t start = reg->base;
1226                 phys_addr_t end = start + reg->size;
1227                 struct map_desc map;
1228
1229                 if (end > arm_lowmem_limit)
1230                         end = arm_lowmem_limit;
1231                 if (start >= end)
1232                         break;
1233
1234                 map.pfn = __phys_to_pfn(start);
1235                 map.virtual = __phys_to_virt(start);
1236                 map.length = end - start;
1237                 map.type = MT_MEMORY;
1238
1239                 create_mapping(&map);
1240         }
1241 }
1242
1243 /*
1244  * paging_init() sets up the page tables, initialises the zone memory
1245  * maps, and sets up the zero page, bad page and bad page tables.
1246  */
1247 void __init paging_init(struct machine_desc *mdesc)
1248 {
1249         void *zero_page;
1250
1251         memblock_set_current_limit(arm_lowmem_limit);
1252
1253         build_mem_type_table();
1254         prepare_page_table();
1255         map_lowmem();
1256         dma_contiguous_remap();
1257         devicemaps_init(mdesc);
1258         kmap_init();
1259
1260         top_pmd = pmd_off_k(0xffff0000);
1261
1262         /* allocate the zero page. */
1263         zero_page = early_alloc(PAGE_SIZE);
1264
1265         bootmem_init();
1266
1267         empty_zero_page = virt_to_page(zero_page);
1268         __flush_dcache_page(NULL, empty_zero_page);
1269 }