arch/arm/boot/dts/omap5.dtsi

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  * Based on "omap4.dtsi"
   8  */
   9
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/interrupt-controller/arm-gic.h>
  12 #include <dt-bindings/pinctrl/omap.h>
  13
  14 #include "skeleton.dtsi"
  15
  16 / {
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         compatible = "ti,omap5";
  21         interrupt-parent = <&wakeupgen>;
  22
  23         aliases {
  24                 i2c0 = &i2c1;
  25                 i2c1 = &i2c2;
  26                 i2c2 = &i2c3;
  27                 i2c3 = &i2c4;
  28                 i2c4 = &i2c5;
  29                 serial0 = &uart1;
  30                 serial1 = &uart2;
  31                 serial2 = &uart3;
  32                 serial3 = &uart4;
  33                 serial4 = &uart5;
  34                 serial5 = &uart6;
  35         };
  36
  37         cpus {
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40
  41                 cpu0: cpu@0 {
  42                         device_type = "cpu";
  43                         compatible = "arm,cortex-a15";
  44                         reg = <0x0>;
  45
  46                         operating-points = <
  47                                 /* kHz    uV */
  48                                 1000000 1060000
  49                                 1500000 1250000
  50                         >;
  51
  52                         clocks = <&dpll_mpu_ck>;
  53                         clock-names = "cpu";
  54
  55                         clock-latency = <300000>; /* From omap-cpufreq driver */
  56
  57                         /* cooling options */
  58                         cooling-min-level = <0>;
  59                         cooling-max-level = <2>;
  60                         #cooling-cells = <2>; /* min followed by max */
  61                 };
  62                 cpu@1 {
  63                         device_type = "cpu";
  64                         compatible = "arm,cortex-a15";
  65                         reg = <0x1>;
  66                 };
  67         };
  68
  69         thermal-zones {
  70                 #include "omap4-cpu-thermal.dtsi"
  71                 #include "omap5-gpu-thermal.dtsi"
  72                 #include "omap5-core-thermal.dtsi"
  73         };
  74
  75         timer {
  76                 compatible = "arm,armv7-timer";
  77                 /* PPI secure/nonsecure IRQ */
  78                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  79                              <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  80                              <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  81                              <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
  82                 interrupt-parent = <&gic>;
  83         };
  84
  85         pmu {
  86                 compatible = "arm,cortex-a15-pmu";
  87                 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
  88                              <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
  89         };
  90
  91         gic: interrupt-controller@48211000 {
  92                 compatible = "arm,cortex-a15-gic";
  93                 interrupt-controller;
  94                 #interrupt-cells = <3>;
  95                 reg = <0x48211000 0x1000>,
  96                       <0x48212000 0x1000>,
  97                       <0x48214000 0x2000>,
  98                       <0x48216000 0x2000>;
  99                 interrupt-parent = <&gic>;
 100         };
 101
 102         wakeupgen: interrupt-controller@48281000 {
 103                 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
 104                 interrupt-controller;
 105                 #interrupt-cells = <3>;
 106                 reg = <0x48281000 0x1000>;
 107                 interrupt-parent = <&gic>;
 108         };
 109
 110         /*
 111          * The soc node represents the soc top level view. It is used for IPs
 112          * that are not memory mapped in the MPU view or for the MPU itself.
 113          */
 114         soc {
 115                 compatible = "ti,omap-infra";
 116                 mpu {
 117                         compatible = "ti,omap4-mpu";
 118                         ti,hwmods = "mpu";
 119                         sram = <&ocmcram>;
 120                 };
 121         };
 122
 123         /*
 124          * XXX: Use a flat representation of the OMAP3 interconnect.
 125          * The real OMAP interconnect network is quite complex.
 126          * Since it will not bring real advantage to represent that in DT for
 127          * the moment, just use a fake OCP bus entry to represent the whole bus
 128          * hierarchy.
 129          */
 130         ocp {
 131                 compatible = "ti,omap5-l3-noc", "simple-bus";
 132                 #address-cells = <1>;
 133                 #size-cells = <1>;
 134                 ranges;
 135                 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 136                 reg = <0x44000000 0x2000>,
 137                       <0x44800000 0x3000>,
 138                       <0x45000000 0x4000>;
 139                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 140                              <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 141
 142                 l4_cfg: l4@4a000000 {
 143                         compatible = "ti,omap5-l4-cfg", "simple-bus";
 144                         #address-cells = <1>;
 145                         #size-cells = <1>;
 146                         ranges = <0 0x4a000000 0x22a000>;
 147
 148                         scm_core: scm@2000 {
 149                                 compatible = "ti,omap5-scm-core", "simple-bus";
 150                                 reg = <0x2000 0x1000>;
 151                                 #address-cells = <1>;
 152                                 #size-cells = <1>;
 153                                 ranges = <0 0x2000 0x800>;
 154
 155                                 scm_conf: scm_conf@0 {
 156                                         compatible = "syscon";
 157                                         reg = <0x0 0x800>;
 158                                         #address-cells = <1>;
 159                                         #size-cells = <1>;
 160                                 };
 161                         };
 162
 163                         scm_padconf_core: scm@2800 {
 164                                 compatible = "ti,omap5-scm-padconf-core",
 165                                              "simple-bus";
 166                                 #address-cells = <1>;
 167                                 #size-cells = <1>;
 168                                 ranges = <0 0x2800 0x800>;
 169
 170                                 omap5_pmx_core: pinmux@40 {
 171                                         compatible = "ti,omap5-padconf",
 172                                                      "pinctrl-single";
 173                                         reg = <0x40 0x01b6>;
 174                                         #address-cells = <1>;
 175                                         #size-cells = <0>;
 176                                         #interrupt-cells = <1>;
 177                                         interrupt-controller;
 178                                         pinctrl-single,register-width = <16>;
 179                                         pinctrl-single,function-mask = <0x7fff>;
 180                                 };
 181
 182                                 omap5_padconf_global: omap5_padconf_global@5a0 {
 183                                         compatible = "syscon";
 184                                         reg = <0x5a0 0xec>;
 185                                         #address-cells = <1>;
 186                                         #size-cells = <1>;
 187
 188                                         pbias_regulator: pbias_regulator {
 189                                                 compatible = "ti,pbias-omap";
 190                                                 reg = <0x60 0x4>;
 191                                                 syscon = <&omap5_padconf_global>;
 192                                                 pbias_mmc_reg: pbias_mmc_omap5 {
 193                                                         regulator-name = "pbias_mmc_omap5";
 194                                                         regulator-min-microvolt = <1800000>;
 195                                                         regulator-max-microvolt = <3000000>;
 196                                                 };
 197                                         };
 198                                 };
 199                         };
 200
 201                         cm_core_aon: cm_core_aon@4000 {
 202                                 compatible = "ti,omap5-cm-core-aon";
 203                                 reg = <0x4000 0x2000>;
 204
 205                                 cm_core_aon_clocks: clocks {
 206                                         #address-cells = <1>;
 207                                         #size-cells = <0>;
 208                                 };
 209
 210                                 cm_core_aon_clockdomains: clockdomains {
 211                                 };
 212                         };
 213
 214                         cm_core: cm_core@8000 {
 215                                 compatible = "ti,omap5-cm-core";
 216                                 reg = <0x8000 0x3000>;
 217
 218                                 cm_core_clocks: clocks {
 219                                         #address-cells = <1>;
 220                                         #size-cells = <0>;
 221                                 };
 222
 223                                 cm_core_clockdomains: clockdomains {
 224                                 };
 225                         };
 226                 };
 227
 228                 l4_wkup: l4@4ae00000 {
 229                         compatible = "ti,omap5-l4-wkup", "simple-bus";
 230                         #address-cells = <1>;
 231                         #size-cells = <1>;
 232                         ranges = <0 0x4ae00000 0x2b000>;
 233
 234                         counter32k: counter@4000 {
 235                                 compatible = "ti,omap-counter32k";
 236                                 reg = <0x4000 0x40>;
 237                                 ti,hwmods = "counter_32k";
 238                         };
 239
 240                         prm: prm@6000 {
 241                                 compatible = "ti,omap5-prm";
 242                                 reg = <0x6000 0x3000>;
 243                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 244
 245                                 prm_clocks: clocks {
 246                                         #address-cells = <1>;
 247                                         #size-cells = <0>;
 248                                 };
 249
 250                                 prm_clockdomains: clockdomains {
 251                                 };
 252                         };
 253
 254                         scrm: scrm@a000 {
 255                                 compatible = "ti,omap5-scrm";
 256                                 reg = <0xa000 0x2000>;
 257
 258                                 scrm_clocks: clocks {
 259                                         #address-cells = <1>;
 260                                         #size-cells = <0>;
 261                                 };
 262
 263                                 scrm_clockdomains: clockdomains {
 264                                 };
 265                         };
 266
 267                         omap5_pmx_wkup: pinmux@c840 {
 268                                 compatible = "ti,omap5-padconf",
 269                                              "pinctrl-single";
 270                                 reg = <0xc840 0x0038>;
 271                                 #address-cells = <1>;
 272                                 #size-cells = <0>;
 273                                 #interrupt-cells = <1>;
 274                                 interrupt-controller;
 275                                 pinctrl-single,register-width = <16>;
 276                                 pinctrl-single,function-mask = <0x7fff>;
 277                         };
 278                 };
 279
 280                 ocmcram: ocmcram@40300000 {
 281                         compatible = "mmio-sram";
 282                         reg = <0x40300000 0x20000>; /* 128k */
 283                 };
 284
 285                 sdma: dma-controller@4a056000 {
 286                         compatible = "ti,omap4430-sdma";
 287                         reg = <0x4a056000 0x1000>;
 288                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 289                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 290                                      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 291                                      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 292                         #dma-cells = <1>;
 293                         dma-channels = <32>;
 294                         dma-requests = <127>;
 295                 };
 296
 297                 gpio1: gpio@4ae10000 {
 298                         compatible = "ti,omap4-gpio";
 299                         reg = <0x4ae10000 0x200>;
 300                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 301                         ti,hwmods = "gpio1";
 302                         ti,gpio-always-on;
 303                         gpio-controller;
 304                         #gpio-cells = <2>;
 305                         interrupt-controller;
 306                         #interrupt-cells = <2>;
 307                 };
 308
 309                 gpio2: gpio@48055000 {
 310                         compatible = "ti,omap4-gpio";
 311                         reg = <0x48055000 0x200>;
 312                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 313                         ti,hwmods = "gpio2";
 314                         gpio-controller;
 315                         #gpio-cells = <2>;
 316                         interrupt-controller;
 317                         #interrupt-cells = <2>;
 318                 };
 319
 320                 gpio3: gpio@48057000 {
 321                         compatible = "ti,omap4-gpio";
 322                         reg = <0x48057000 0x200>;
 323                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 324                         ti,hwmods = "gpio3";
 325                         gpio-controller;
 326                         #gpio-cells = <2>;
 327                         interrupt-controller;
 328                         #interrupt-cells = <2>;
 329                 };
 330
 331                 gpio4: gpio@48059000 {
 332                         compatible = "ti,omap4-gpio";
 333                         reg = <0x48059000 0x200>;
 334                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 335                         ti,hwmods = "gpio4";
 336                         gpio-controller;
 337                         #gpio-cells = <2>;
 338                         interrupt-controller;
 339                         #interrupt-cells = <2>;
 340                 };
 341
 342                 gpio5: gpio@4805b000 {
 343                         compatible = "ti,omap4-gpio";
 344                         reg = <0x4805b000 0x200>;
 345                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 346                         ti,hwmods = "gpio5";
 347                         gpio-controller;
 348                         #gpio-cells = <2>;
 349                         interrupt-controller;
 350                         #interrupt-cells = <2>;
 351                 };
 352
 353                 gpio6: gpio@4805d000 {
 354                         compatible = "ti,omap4-gpio";
 355                         reg = <0x4805d000 0x200>;
 356                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 357                         ti,hwmods = "gpio6";
 358                         gpio-controller;
 359                         #gpio-cells = <2>;
 360                         interrupt-controller;
 361                         #interrupt-cells = <2>;
 362                 };
 363
 364                 gpio7: gpio@48051000 {
 365                         compatible = "ti,omap4-gpio";
 366                         reg = <0x48051000 0x200>;
 367                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 368                         ti,hwmods = "gpio7";
 369                         gpio-controller;
 370                         #gpio-cells = <2>;
 371                         interrupt-controller;
 372                         #interrupt-cells = <2>;
 373                 };
 374
 375                 gpio8: gpio@48053000 {
 376                         compatible = "ti,omap4-gpio";
 377                         reg = <0x48053000 0x200>;
 378                         interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 379                         ti,hwmods = "gpio8";
 380                         gpio-controller;
 381                         #gpio-cells = <2>;
 382                         interrupt-controller;
 383                         #interrupt-cells = <2>;
 384                 };
 385
 386                 gpmc: gpmc@50000000 {
 387                         compatible = "ti,omap4430-gpmc";
 388                         reg = <0x50000000 0x1000>;
 389                         #address-cells = <2>;
 390                         #size-cells = <1>;
 391                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 392                         gpmc,num-cs = <8>;
 393                         gpmc,num-waitpins = <4>;
 394                         ti,hwmods = "gpmc";
 395                         clocks = <&l3_iclk_div>;
 396                         clock-names = "fck";
 397                 };
 398
 399                 i2c1: i2c@48070000 {
 400                         compatible = "ti,omap4-i2c";
 401                         reg = <0x48070000 0x100>;
 402                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 403                         #address-cells = <1>;
 404                         #size-cells = <0>;
 405                         ti,hwmods = "i2c1";
 406                 };
 407
 408                 i2c2: i2c@48072000 {
 409                         compatible = "ti,omap4-i2c";
 410                         reg = <0x48072000 0x100>;
 411                         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 412                         #address-cells = <1>;
 413                         #size-cells = <0>;
 414                         ti,hwmods = "i2c2";
 415                 };
 416
 417                 i2c3: i2c@48060000 {
 418                         compatible = "ti,omap4-i2c";
 419                         reg = <0x48060000 0x100>;
 420                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 421                         #address-cells = <1>;
 422                         #size-cells = <0>;
 423                         ti,hwmods = "i2c3";
 424                 };
 425
 426                 i2c4: i2c@4807a000 {
 427                         compatible = "ti,omap4-i2c";
 428                         reg = <0x4807a000 0x100>;
 429                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 430                         #address-cells = <1>;
 431                         #size-cells = <0>;
 432                         ti,hwmods = "i2c4";
 433                 };
 434
 435                 i2c5: i2c@4807c000 {
 436                         compatible = "ti,omap4-i2c";
 437                         reg = <0x4807c000 0x100>;
 438                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 439                         #address-cells = <1>;
 440                         #size-cells = <0>;
 441                         ti,hwmods = "i2c5";
 442                 };
 443
 444                 hwspinlock: spinlock@4a0f6000 {
 445                         compatible = "ti,omap4-hwspinlock";
 446                         reg = <0x4a0f6000 0x1000>;
 447                         ti,hwmods = "spinlock";
 448                         #hwlock-cells = <1>;
 449                 };
 450
 451                 mcspi1: spi@48098000 {
 452                         compatible = "ti,omap4-mcspi";
 453                         reg = <0x48098000 0x200>;
 454                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 455                         #address-cells = <1>;
 456                         #size-cells = <0>;
 457                         ti,hwmods = "mcspi1";
 458                         ti,spi-num-cs = <4>;
 459                         dmas = <&sdma 35>,
 460                                <&sdma 36>,
 461                                <&sdma 37>,
 462                                <&sdma 38>,
 463                                <&sdma 39>,
 464                                <&sdma 40>,
 465                                <&sdma 41>,
 466                                <&sdma 42>;
 467                         dma-names = "tx0", "rx0", "tx1", "rx1",
 468                                     "tx2", "rx2", "tx3", "rx3";
 469                 };
 470
 471                 mcspi2: spi@4809a000 {
 472                         compatible = "ti,omap4-mcspi";
 473                         reg = <0x4809a000 0x200>;
 474                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 475                         #address-cells = <1>;
 476                         #size-cells = <0>;
 477                         ti,hwmods = "mcspi2";
 478                         ti,spi-num-cs = <2>;
 479                         dmas = <&sdma 43>,
 480                                <&sdma 44>,
 481                                <&sdma 45>,
 482                                <&sdma 46>;
 483                         dma-names = "tx0", "rx0", "tx1", "rx1";
 484                 };
 485
 486                 mcspi3: spi@480b8000 {
 487                         compatible = "ti,omap4-mcspi";
 488                         reg = <0x480b8000 0x200>;
 489                         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 490                         #address-cells = <1>;
 491                         #size-cells = <0>;
 492                         ti,hwmods = "mcspi3";
 493                         ti,spi-num-cs = <2>;
 494                         dmas = <&sdma 15>, <&sdma 16>;
 495                         dma-names = "tx0", "rx0";
 496                 };
 497
 498                 mcspi4: spi@480ba000 {
 499                         compatible = "ti,omap4-mcspi";
 500                         reg = <0x480ba000 0x200>;
 501                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 502                         #address-cells = <1>;
 503                         #size-cells = <0>;
 504                         ti,hwmods = "mcspi4";
 505                         ti,spi-num-cs = <1>;
 506                         dmas = <&sdma 70>, <&sdma 71>;
 507                         dma-names = "tx0", "rx0";
 508                 };
 509
 510                 uart1: serial@4806a000 {
 511                         compatible = "ti,omap4-uart";
 512                         reg = <0x4806a000 0x100>;
 513                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 514                         ti,hwmods = "uart1";
 515                         clock-frequency = <48000000>;
 516                 };
 517
 518                 uart2: serial@4806c000 {
 519                         compatible = "ti,omap4-uart";
 520                         reg = <0x4806c000 0x100>;
 521                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 522                         ti,hwmods = "uart2";
 523                         clock-frequency = <48000000>;
 524                 };
 525
 526                 uart3: serial@48020000 {
 527                         compatible = "ti,omap4-uart";
 528                         reg = <0x48020000 0x100>;
 529                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 530                         ti,hwmods = "uart3";
 531                         clock-frequency = <48000000>;
 532                 };
 533
 534                 uart4: serial@4806e000 {
 535                         compatible = "ti,omap4-uart";
 536                         reg = <0x4806e000 0x100>;
 537                         interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 538                         ti,hwmods = "uart4";
 539                         clock-frequency = <48000000>;
 540                 };
 541
 542                 uart5: serial@48066000 {
 543                         compatible = "ti,omap4-uart";
 544                         reg = <0x48066000 0x100>;
 545                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 546                         ti,hwmods = "uart5";
 547                         clock-frequency = <48000000>;
 548                 };
 549
 550                 uart6: serial@48068000 {
 551                         compatible = "ti,omap4-uart";
 552                         reg = <0x48068000 0x100>;
 553                         interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 554                         ti,hwmods = "uart6";
 555                         clock-frequency = <48000000>;
 556                 };
 557
 558                 mmc1: mmc@4809c000 {
 559                         compatible = "ti,omap4-hsmmc";
 560                         reg = <0x4809c000 0x400>;
 561                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 562                         ti,hwmods = "mmc1";
 563                         ti,dual-volt;
 564                         ti,needs-special-reset;
 565                         dmas = <&sdma 61>, <&sdma 62>;
 566                         dma-names = "tx", "rx";
 567                         pbias-supply = <&pbias_mmc_reg>;
 568                 };
 569
 570                 mmc2: mmc@480b4000 {
 571                         compatible = "ti,omap4-hsmmc";
 572                         reg = <0x480b4000 0x400>;
 573                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 574                         ti,hwmods = "mmc2";
 575                         ti,needs-special-reset;
 576                         dmas = <&sdma 47>, <&sdma 48>;
 577                         dma-names = "tx", "rx";
 578                 };
 579
 580                 mmc3: mmc@480ad000 {
 581                         compatible = "ti,omap4-hsmmc";
 582                         reg = <0x480ad000 0x400>;
 583                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 584                         ti,hwmods = "mmc3";
 585                         ti,needs-special-reset;
 586                         dmas = <&sdma 77>, <&sdma 78>;
 587                         dma-names = "tx", "rx";
 588                 };
 589
 590                 mmc4: mmc@480d1000 {
 591                         compatible = "ti,omap4-hsmmc";
 592                         reg = <0x480d1000 0x400>;
 593                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 594                         ti,hwmods = "mmc4";
 595                         ti,needs-special-reset;
 596                         dmas = <&sdma 57>, <&sdma 58>;
 597                         dma-names = "tx", "rx";
 598                 };
 599
 600                 mmc5: mmc@480d5000 {
 601                         compatible = "ti,omap4-hsmmc";
 602                         reg = <0x480d5000 0x400>;
 603                         interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 604                         ti,hwmods = "mmc5";
 605                         ti,needs-special-reset;
 606                         dmas = <&sdma 59>, <&sdma 60>;
 607                         dma-names = "tx", "rx";
 608                 };
 609
 610                 mmu_dsp: mmu@4a066000 {
 611                         compatible = "ti,omap4-iommu";
 612                         reg = <0x4a066000 0x100>;
 613                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 614                         ti,hwmods = "mmu_dsp";
 615                         #iommu-cells = <0>;
 616                 };
 617
 618                 mmu_ipu: mmu@55082000 {
 619                         compatible = "ti,omap4-iommu";
 620                         reg = <0x55082000 0x100>;
 621                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 622                         ti,hwmods = "mmu_ipu";
 623                         #iommu-cells = <0>;
 624                         ti,iommu-bus-err-back;
 625                 };
 626
 627                 keypad: keypad@4ae1c000 {
 628                         compatible = "ti,omap4-keypad";
 629                         reg = <0x4ae1c000 0x400>;
 630                         ti,hwmods = "kbd";
 631                 };
 632
 633                 mcpdm: mcpdm@40132000 {
 634                         compatible = "ti,omap4-mcpdm";
 635                         reg = <0x40132000 0x7f>, /* MPU private access */
 636                               <0x49032000 0x7f>; /* L3 Interconnect */
 637                         reg-names = "mpu", "dma";
 638                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 639                         ti,hwmods = "mcpdm";
 640                         dmas = <&sdma 65>,
 641                                <&sdma 66>;
 642                         dma-names = "up_link", "dn_link";
 643                         status = "disabled";
 644                 };
 645
 646                 dmic: dmic@4012e000 {
 647                         compatible = "ti,omap4-dmic";
 648                         reg = <0x4012e000 0x7f>, /* MPU private access */
 649                               <0x4902e000 0x7f>; /* L3 Interconnect */
 650                         reg-names = "mpu", "dma";
 651                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 652                         ti,hwmods = "dmic";
 653                         dmas = <&sdma 67>;
 654                         dma-names = "up_link";
 655                         status = "disabled";
 656                 };
 657
 658                 mcbsp1: mcbsp@40122000 {
 659                         compatible = "ti,omap4-mcbsp";
 660                         reg = <0x40122000 0xff>, /* MPU private access */
 661                               <0x49022000 0xff>; /* L3 Interconnect */
 662                         reg-names = "mpu", "dma";
 663                         interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 664                         interrupt-names = "common";
 665                         ti,buffer-size = <128>;
 666                         ti,hwmods = "mcbsp1";
 667                         dmas = <&sdma 33>,
 668                                <&sdma 34>;
 669                         dma-names = "tx", "rx";
 670                         status = "disabled";
 671                 };
 672
 673                 mcbsp2: mcbsp@40124000 {
 674                         compatible = "ti,omap4-mcbsp";
 675                         reg = <0x40124000 0xff>, /* MPU private access */
 676                               <0x49024000 0xff>; /* L3 Interconnect */
 677                         reg-names = "mpu", "dma";
 678                         interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 679                         interrupt-names = "common";
 680                         ti,buffer-size = <128>;
 681                         ti,hwmods = "mcbsp2";
 682                         dmas = <&sdma 17>,
 683                                <&sdma 18>;
 684                         dma-names = "tx", "rx";
 685                         status = "disabled";
 686                 };
 687
 688                 mcbsp3: mcbsp@40126000 {
 689                         compatible = "ti,omap4-mcbsp";
 690                         reg = <0x40126000 0xff>, /* MPU private access */
 691                               <0x49026000 0xff>; /* L3 Interconnect */
 692                         reg-names = "mpu", "dma";
 693                         interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 694                         interrupt-names = "common";
 695                         ti,buffer-size = <128>;
 696                         ti,hwmods = "mcbsp3";
 697                         dmas = <&sdma 19>,
 698                                <&sdma 20>;
 699                         dma-names = "tx", "rx";
 700                         status = "disabled";
 701                 };
 702
 703                 mailbox: mailbox@4a0f4000 {
 704                         compatible = "ti,omap4-mailbox";
 705                         reg = <0x4a0f4000 0x200>;
 706                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 707                         ti,hwmods = "mailbox";
 708                         #mbox-cells = <1>;
 709                         ti,mbox-num-users = <3>;
 710                         ti,mbox-num-fifos = <8>;
 711                         mbox_ipu: mbox_ipu {
 712                                 ti,mbox-tx = <0 0 0>;
 713                                 ti,mbox-rx = <1 0 0>;
 714                         };
 715                         mbox_dsp: mbox_dsp {
 716                                 ti,mbox-tx = <3 0 0>;
 717                                 ti,mbox-rx = <2 0 0>;
 718                         };
 719                 };
 720
 721                 timer1: timer@4ae18000 {
 722                         compatible = "ti,omap5430-timer";
 723                         reg = <0x4ae18000 0x80>;
 724                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 725                         ti,hwmods = "timer1";
 726                         ti,timer-alwon;
 727                 };
 728
 729                 timer2: timer@48032000 {
 730                         compatible = "ti,omap5430-timer";
 731                         reg = <0x48032000 0x80>;
 732                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 733                         ti,hwmods = "timer2";
 734                 };
 735
 736                 timer3: timer@48034000 {
 737                         compatible = "ti,omap5430-timer";
 738                         reg = <0x48034000 0x80>;
 739                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 740                         ti,hwmods = "timer3";
 741                 };
 742
 743                 timer4: timer@48036000 {
 744                         compatible = "ti,omap5430-timer";
 745                         reg = <0x48036000 0x80>;
 746                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 747                         ti,hwmods = "timer4";
 748                 };
 749
 750                 timer5: timer@40138000 {
 751                         compatible = "ti,omap5430-timer";
 752                         reg = <0x40138000 0x80>,
 753                               <0x49038000 0x80>;
 754                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 755                         ti,hwmods = "timer5";
 756                         ti,timer-dsp;
 757                         ti,timer-pwm;
 758                 };
 759
 760                 timer6: timer@4013a000 {
 761                         compatible = "ti,omap5430-timer";
 762                         reg = <0x4013a000 0x80>,
 763                               <0x4903a000 0x80>;
 764                         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 765                         ti,hwmods = "timer6";
 766                         ti,timer-dsp;
 767                         ti,timer-pwm;
 768                 };
 769
 770                 timer7: timer@4013c000 {
 771                         compatible = "ti,omap5430-timer";
 772                         reg = <0x4013c000 0x80>,
 773                               <0x4903c000 0x80>;
 774                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 775                         ti,hwmods = "timer7";
 776                         ti,timer-dsp;
 777                 };
 778
 779                 timer8: timer@4013e000 {
 780                         compatible = "ti,omap5430-timer";
 781                         reg = <0x4013e000 0x80>,
 782                               <0x4903e000 0x80>;
 783                         interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 784                         ti,hwmods = "timer8";
 785                         ti,timer-dsp;
 786                         ti,timer-pwm;
 787                 };
 788
 789                 timer9: timer@4803e000 {
 790                         compatible = "ti,omap5430-timer";
 791                         reg = <0x4803e000 0x80>;
 792                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 793                         ti,hwmods = "timer9";
 794                         ti,timer-pwm;
 795                 };
 796
 797                 timer10: timer@48086000 {
 798                         compatible = "ti,omap5430-timer";
 799                         reg = <0x48086000 0x80>;
 800                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 801                         ti,hwmods = "timer10";
 802                         ti,timer-pwm;
 803                 };
 804
 805                 timer11: timer@48088000 {
 806                         compatible = "ti,omap5430-timer";
 807                         reg = <0x48088000 0x80>;
 808                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 809                         ti,hwmods = "timer11";
 810                         ti,timer-pwm;
 811                 };
 812
 813                 wdt2: wdt@4ae14000 {
 814                         compatible = "ti,omap5-wdt", "ti,omap3-wdt";
 815                         reg = <0x4ae14000 0x80>;
 816                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 817                         ti,hwmods = "wd_timer2";
 818                 };
 819
 820                 dmm@4e000000 {
 821                         compatible = "ti,omap5-dmm";
 822                         reg = <0x4e000000 0x800>;
 823                         interrupts = <0 113 0x4>;
 824                         ti,hwmods = "dmm";
 825                 };
 826
 827                 emif1: emif@4c000000 {
 828                         compatible      = "ti,emif-4d5";
 829                         ti,hwmods       = "emif1";
 830                         ti,no-idle-on-init;
 831                         phy-type        = <2>; /* DDR PHY type: Intelli PHY */
 832                         reg = <0x4c000000 0x400>;
 833                         interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 834                         hw-caps-read-idle-ctrl;
 835                         hw-caps-ll-interface;
 836                         hw-caps-temp-alert;
 837                 };
 838
 839                 emif2: emif@4d000000 {
 840                         compatible      = "ti,emif-4d5";
 841                         ti,hwmods       = "emif2";
 842                         ti,no-idle-on-init;
 843                         phy-type        = <2>; /* DDR PHY type: Intelli PHY */
 844                         reg = <0x4d000000 0x400>;
 845                         interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 846                         hw-caps-read-idle-ctrl;
 847                         hw-caps-ll-interface;
 848                         hw-caps-temp-alert;
 849                 };
 850
 851                 omap_control_usb2phy: control-phy@4a002300 {
 852                         compatible = "ti,control-phy-usb2";
 853                         reg = <0x4a002300 0x4>;
 854                         reg-names = "power";
 855                 };
 856
 857                 omap_control_usb3phy: control-phy@4a002370 {
 858                         compatible = "ti,control-phy-pipe3";
 859                         reg = <0x4a002370 0x4>;
 860                         reg-names = "power";
 861                 };
 862
 863                 usb3: omap_dwc3@4a020000 {
 864                         compatible = "ti,dwc3";
 865                         ti,hwmods = "usb_otg_ss";
 866                         reg = <0x4a020000 0x10000>;
 867                         interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 868                         #address-cells = <1>;
 869                         #size-cells = <1>;
 870                         utmi-mode = <2>;
 871                         ranges;
 872                         dwc3@4a030000 {
 873                                 compatible = "snps,dwc3";
 874                                 reg = <0x4a030000 0x10000>;
 875                                 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 876                                 phys = <&usb2_phy>, <&usb3_phy>;
 877                                 phy-names = "usb2-phy", "usb3-phy";
 878                                 dr_mode = "peripheral";
 879                                 tx-fifo-resize;
 880                         };
 881                 };
 882
 883                 ocp2scp@4a080000 {
 884                         compatible = "ti,omap-ocp2scp";
 885                         #address-cells = <1>;
 886                         #size-cells = <1>;
 887                         reg = <0x4a080000 0x20>;
 888                         ranges;
 889                         ti,hwmods = "ocp2scp1";
 890                         usb2_phy: usb2phy@4a084000 {
 891                                 compatible = "ti,omap-usb2";
 892                                 reg = <0x4a084000 0x7c>;
 893                                 ctrl-module = <&omap_control_usb2phy>;
 894                                 clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
 895                                 clock-names = "wkupclk", "refclk";
 896                                 #phy-cells = <0>;
 897                         };
 898
 899                         usb3_phy: usb3phy@4a084400 {
 900                                 compatible = "ti,omap-usb3";
 901                                 reg = <0x4a084400 0x80>,
 902                                       <0x4a084800 0x64>,
 903                                       <0x4a084c00 0x40>;
 904                                 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 905                                 ctrl-module = <&omap_control_usb3phy>;
 906                                 clocks = <&usb_phy_cm_clk32k>,
 907                                          <&sys_clkin>,
 908                                          <&usb_otg_ss_refclk960m>;
 909                                 clock-names =   "wkupclk",
 910                                                 "sysclk",
 911                                                 "refclk";
 912                                 #phy-cells = <0>;
 913                         };
 914                 };
 915
 916                 usbhstll: usbhstll@4a062000 {
 917                         compatible = "ti,usbhs-tll";
 918                         reg = <0x4a062000 0x1000>;
 919                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 920                         ti,hwmods = "usb_tll_hs";
 921                 };
 922
 923                 usbhshost: usbhshost@4a064000 {
 924                         compatible = "ti,usbhs-host";
 925                         reg = <0x4a064000 0x800>;
 926                         ti,hwmods = "usb_host_hs";
 927                         #address-cells = <1>;
 928                         #size-cells = <1>;
 929                         ranges;
 930                         clocks = <&l3init_60m_fclk>,
 931                                  <&xclk60mhsp1_ck>,
 932                                  <&xclk60mhsp2_ck>;
 933                         clock-names = "refclk_60m_int",
 934                                       "refclk_60m_ext_p1",
 935                                       "refclk_60m_ext_p2";
 936
 937                         usbhsohci: ohci@4a064800 {
 938                                 compatible = "ti,ohci-omap3";
 939                                 reg = <0x4a064800 0x400>;
 940                                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 941                         };
 942
 943                         usbhsehci: ehci@4a064c00 {
 944                                 compatible = "ti,ehci-omap";
 945                                 reg = <0x4a064c00 0x400>;
 946                                 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 947                         };
 948                 };
 949
 950                 bandgap: bandgap@4a0021e0 {
 951                         reg = <0x4a0021e0 0xc
 952                                0x4a00232c 0xc
 953                                0x4a002380 0x2c
 954                                0x4a0023C0 0x3c>;
 955                         interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 956                         compatible = "ti,omap5430-bandgap";
 957
 958                         #thermal-sensor-cells = <1>;
 959                 };
 960
 961                 omap_control_sata: control-phy@4a002374 {
 962                         compatible = "ti,control-phy-pipe3";
 963                         reg = <0x4a002374 0x4>;
 964                         reg-names = "power";
 965                         clocks = <&sys_clkin>;
 966                         clock-names = "sysclk";
 967                 };
 968
 969                 /* OCP2SCP3 */
 970                 ocp2scp@4a090000 {
 971                         compatible = "ti,omap-ocp2scp";
 972                         #address-cells = <1>;
 973                         #size-cells = <1>;
 974                         reg = <0x4a090000 0x20>;
 975                         ranges;
 976                         ti,hwmods = "ocp2scp3";
 977                         sata_phy: phy@4a096000 {
 978                                 compatible = "ti,phy-pipe3-sata";
 979                                 reg = <0x4A096000 0x80>, /* phy_rx */
 980                                       <0x4A096400 0x64>, /* phy_tx */
 981                                       <0x4A096800 0x40>; /* pll_ctrl */
 982                                 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 983                                 ctrl-module = <&omap_control_sata>;
 984                                 clocks = <&sys_clkin>, <&sata_ref_clk>;
 985                                 clock-names = "sysclk", "refclk";
 986                                 #phy-cells = <0>;
 987                         };
 988                 };
 989
 990                 sata: sata@4a141100 {
 991                         compatible = "snps,dwc-ahci";
 992                         reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
 993                         interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 994                         phys = <&sata_phy>;
 995                         phy-names = "sata-phy";
 996                         clocks = <&sata_ref_clk>;
 997                         ti,hwmods = "sata";
 998                 };
 999
1000                 dss: dss@58000000 {
1001                         compatible = "ti,omap5-dss";
1002                         reg = <0x58000000 0x80>;
1003                         status = "disabled";
1004                         ti,hwmods = "dss_core";
1005                         clocks = <&dss_dss_clk>;
1006                         clock-names = "fck";
1007                         #address-cells = <1>;
1008                         #size-cells = <1>;
1009                         ranges;
1010
1011                         dispc@58001000 {
1012                                 compatible = "ti,omap5-dispc";
1013                                 reg = <0x58001000 0x1000>;
1014                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
1015                                 ti,hwmods = "dss_dispc";
1016                                 clocks = <&dss_dss_clk>;
1017                                 clock-names = "fck";
1018                         };
1019
1020                         rfbi: encoder@58002000  {
1021                                 compatible = "ti,omap5-rfbi";
1022                                 reg = <0x58002000 0x100>;
1023                                 status = "disabled";
1024                                 ti,hwmods = "dss_rfbi";
1025                                 clocks = <&dss_dss_clk>, <&l3_iclk_div>;
1026                                 clock-names = "fck", "ick";
1027                         };
1028
1029                         dsi1: encoder@58004000 {
1030                                 compatible = "ti,omap5-dsi";
1031                                 reg = <0x58004000 0x200>,
1032                                       <0x58004200 0x40>,
1033                                       <0x58004300 0x40>;
1034                                 reg-names = "proto", "phy", "pll";
1035                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
1036                                 status = "disabled";
1037                                 ti,hwmods = "dss_dsi1";
1038                                 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
1039                                 clock-names = "fck", "sys_clk";
1040                         };
1041
1042                         dsi2: encoder@58005000 {
1043                                 compatible = "ti,omap5-dsi";
1044                                 reg = <0x58009000 0x200>,
1045                                       <0x58009200 0x40>,
1046                                       <0x58009300 0x40>;
1047                                 reg-names = "proto", "phy", "pll";
1048                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
1049                                 status = "disabled";
1050                                 ti,hwmods = "dss_dsi2";
1051                                 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
1052                                 clock-names = "fck", "sys_clk";
1053                         };
1054
1055                         hdmi: encoder@58060000 {
1056                                 compatible = "ti,omap5-hdmi";
1057                                 reg = <0x58040000 0x200>,
1058                                       <0x58040200 0x80>,
1059                                       <0x58040300 0x80>,
1060                                       <0x58060000 0x19000>;
1061                                 reg-names = "wp", "pll", "phy", "core";
1062                                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1063                                 status = "disabled";
1064                                 ti,hwmods = "dss_hdmi";
1065                                 clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
1066                                 clock-names = "fck", "sys_clk";
1067                                 dmas = <&sdma 76>;
1068                                 dma-names = "audio_tx";
1069                         };
1070                 };
1071
1072                 abb_mpu: regulator-abb-mpu {
1073                         compatible = "ti,abb-v2";
1074                         regulator-name = "abb_mpu";
1075                         #address-cells = <0>;
1076                         #size-cells = <0>;
1077                         clocks = <&sys_clkin>;
1078                         ti,settling-time = <50>;
1079                         ti,clock-cycles = <16>;
1080
1081                         reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
1082                               <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
1083                         reg-names = "base-address", "int-address",
1084                                     "efuse-address", "ldo-address";
1085                         ti,tranxdone-status-mask = <0x80>;
1086                         /* LDOVBBMPU_MUX_CTRL */
1087                         ti,ldovbb-override-mask = <0x400>;
1088                         /* LDOVBBMPU_VSET_OUT */
1089                         ti,ldovbb-vset-mask = <0x1F>;
1090
1091                         /*
1092                          * NOTE: only FBB mode used but actual vset will
1093                          * determine final biasing
1094                          */
1095                         ti,abb_info = <
1096                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1097                         1060000         0       0x0     0 0x02000000 0x01F00000
1098                         1250000         0       0x4     0 0x02000000 0x01F00000
1099                         >;
1100                 };
1101
1102                 abb_mm: regulator-abb-mm {
1103                         compatible = "ti,abb-v2";
1104                         regulator-name = "abb_mm";
1105                         #address-cells = <0>;
1106                         #size-cells = <0>;
1107                         clocks = <&sys_clkin>;
1108                         ti,settling-time = <50>;
1109                         ti,clock-cycles = <16>;
1110
1111                         reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
1112                               <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
1113                         reg-names = "base-address", "int-address",
1114                                     "efuse-address", "ldo-address";
1115                         ti,tranxdone-status-mask = <0x80000000>;
1116                         /* LDOVBBMM_MUX_CTRL */
1117                         ti,ldovbb-override-mask = <0x400>;
1118                         /* LDOVBBMM_VSET_OUT */
1119                         ti,ldovbb-vset-mask = <0x1F>;
1120
1121                         /*
1122                          * NOTE: only FBB mode used but actual vset will
1123                          * determine final biasing
1124                          */
1125                         ti,abb_info = <
1126                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1127                         1025000         0       0x0     0 0x02000000 0x01F00000
1128                         1120000         0       0x4     0 0x02000000 0x01F00000
1129                         >;
1130                 };
1131         };
1132 };
1133
1134 &cpu_thermal {
1135         polling-delay = <500>; /* milliseconds */
1136 };
1137
1138 /include/ "omap54xx-clocks.dtsi"