Merge branch 'async-scsi-resume' of git://git.kernel.org/pub/scm/linux/kernel/git...

[linux.git] / arch / arm / boot / dts / omap3-beagle.dts

diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index d01e9a76c5da0c2ac034d85b7e1ae7880dbefd7e..3c3e6da1deacdaddd2ec75cfa2aa3ba8837b929e 100644 (file)
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -24,6 +24,11 @@
                reg = <0x80000000 0x10000000>; /* 256 MB */
        };
 
+       aliases {
+               display0 = &dvi0;
+               display1 = &tv0;
+       };
+
        leds {
                compatible = "gpio-leds";
                pmu_stat {
@@ -80,6 +85,61 @@
                };
 
        };
+
+       tfp410: encoder@0 {
+               compatible = "ti,tfp410";
+               powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;  /* gpio_170 */
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&tfp410_pins>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               tfp410_in: endpoint@0 {
+                                       remote-endpoint = <&dpi_out>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               tfp410_out: endpoint@0 {
+                                       remote-endpoint = <&dvi_connector_in>;
+                               };
+                       };
+               };
+       };
+
+       dvi0: connector@0 {
+               compatible = "dvi-connector";
+               label = "dvi";
+
+               digital;
+
+               ddc-i2c-bus = <&i2c3>;
+
+               port {
+                       dvi_connector_in: endpoint {
+                               remote-endpoint = <&tfp410_out>;
+                       };
+               };
+       };
+
+       tv0: connector@1 {
+               compatible = "svideo-connector";
+               label = "tv";
+
+               port {
+                       tv_connector_in: endpoint {
+                               remote-endpoint = <&venc_out>;
+                       };
+               };
+       };
 };
 
 &omap3_pmx_wkup {
@@ -113,6 +173,45 @@
                        0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
                >;
        };
+
+       tfp410_pins: pinmux_tfp410_pins {
+               pinctrl-single,pins = <
+                       0x194 (PIN_OUTPUT | MUX_MODE4)  /* hdq_sio.gpio_170 */
+               >;
+       };
+
+       dss_dpi_pins: pinmux_dss_dpi_pins {
+               pinctrl-single,pins = <
+                       0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+                       0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+                       0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+                       0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+                       0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+                       0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+                       0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+                       0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+                       0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+                       0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+                       0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+                       0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+                       0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+                       0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+                       0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+                       0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+                       0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+                       0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+                       0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+                       0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+                       0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+                       0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+                       0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+                       0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+                       0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+                       0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+                       0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+                       0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+               >;
+       };
 };
 
 &omap3_pmx_core2 {
@@ -152,6 +251,10 @@
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
 
+&i2c3 {
+       clock-frequency = <100000>;
+};
+
 &mmc1 {
        vmmc-supply = <&vmmc1>;
        vmmc_aux-supply = <&vsim>;
@@ -215,3 +318,35 @@
 &mcbsp2 {
        status = "okay";
 };
+
+/* Needed to power the DPI pins */
+&vpll2 {
+       regulator-always-on;
+};
+
+&dss {
+       status = "ok";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&dss_dpi_pins>;
+
+       port {
+               dpi_out: endpoint {
+                       remote-endpoint = <&tfp410_in>;
+                       data-lines = <24>;
+               };
+       };
+};
+
+&venc {
+       status = "ok";
+
+       vdda-supply = <&vdac>;
+
+       port {
+               venc_out: endpoint {
+                       remote-endpoint = <&tv_connector_in>;
+                       ti,channels = <2>;
+               };
+       };
+};