arch/arm/mach-s3c24xx/mach-bast.c

   1 /* linux/arch/arm/mach-s3c2410/mach-bast.c
   2  *
   3  * Copyright 2003-2008 Simtec Electronics
   4  *   Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * http://www.simtec.co.uk/products/EB2410ITX/
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11 */
  12
  13 #include <linux/kernel.h>
  14 #include <linux/types.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/list.h>
  17 #include <linux/timer.h>
  18 #include <linux/init.h>
  19 #include <linux/gpio.h>
  20 #include <linux/syscore_ops.h>
  21 #include <linux/serial_core.h>
  22 #include <linux/serial_s3c.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/dm9000.h>
  25 #include <linux/ata_platform.h>
  26 #include <linux/i2c.h>
  27 #include <linux/io.h>
  28 #include <linux/serial_8250.h>
  29
  30 #include <linux/mtd/mtd.h>
  31 #include <linux/mtd/nand.h>
  32 #include <linux/mtd/nand_ecc.h>
  33 #include <linux/mtd/partitions.h>
  34
  35 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
  36 #include <linux/platform_data/hwmon-s3c.h>
  37 #include <linux/platform_data/i2c-s3c2410.h>
  38 #include <linux/platform_data/mtd-nand-s3c2410.h>
  39
  40 #include <net/ax88796.h>
  41
  42 #include <asm/irq.h>
  43 #include <asm/mach/arch.h>
  44 #include <asm/mach/map.h>
  45 #include <asm/mach/irq.h>
  46 #include <asm/mach-types.h>
  47
  48 #include <mach/fb.h>
  49 #include <mach/hardware.h>
  50 #include <mach/regs-gpio.h>
  51 #include <mach/regs-lcd.h>
  52 #include <mach/gpio-samsung.h>
  53
  54 #include <plat/clock.h>
  55 #include <plat/cpu.h>
  56 #include <plat/cpu-freq.h>
  57 #include <plat/devs.h>
  58 #include <plat/gpio-cfg.h>
  59 #include <plat/samsung-time.h>
  60
  61 #include "bast.h"
  62 #include "common.h"
  63 #include "simtec.h"
  64
  65 #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
  66
  67 /* macros for virtual address mods for the io space entries */
  68 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
  69 #define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
  70 #define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
  71 #define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
  72
  73 /* macros to modify the physical addresses for io space */
  74
  75 #define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
  76 #define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
  77 #define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
  78 #define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
  79
  80 static struct map_desc bast_iodesc[] __initdata = {
  81   /* ISA IO areas */
  82   {
  83           .virtual      = (u32)S3C24XX_VA_ISA_BYTE,
  84           .pfn          = PA_CS2(BAST_PA_ISAIO),
  85           .length       = SZ_16M,
  86           .type         = MT_DEVICE,
  87   }, {
  88           .virtual      = (u32)S3C24XX_VA_ISA_WORD,
  89           .pfn          = PA_CS3(BAST_PA_ISAIO),
  90           .length       = SZ_16M,
  91           .type         = MT_DEVICE,
  92   },
  93   /* bast CPLD control registers, and external interrupt controls */
  94   {
  95           .virtual      = (u32)BAST_VA_CTRL1,
  96           .pfn          = __phys_to_pfn(BAST_PA_CTRL1),
  97           .length       = SZ_1M,
  98           .type         = MT_DEVICE,
  99   }, {
 100           .virtual      = (u32)BAST_VA_CTRL2,
 101           .pfn          = __phys_to_pfn(BAST_PA_CTRL2),
 102           .length       = SZ_1M,
 103           .type         = MT_DEVICE,
 104   }, {
 105           .virtual      = (u32)BAST_VA_CTRL3,
 106           .pfn          = __phys_to_pfn(BAST_PA_CTRL3),
 107           .length       = SZ_1M,
 108           .type         = MT_DEVICE,
 109   }, {
 110           .virtual      = (u32)BAST_VA_CTRL4,
 111           .pfn          = __phys_to_pfn(BAST_PA_CTRL4),
 112           .length       = SZ_1M,
 113           .type         = MT_DEVICE,
 114   },
 115   /* PC104 IRQ mux */
 116   {
 117           .virtual      = (u32)BAST_VA_PC104_IRQREQ,
 118           .pfn          = __phys_to_pfn(BAST_PA_PC104_IRQREQ),
 119           .length       = SZ_1M,
 120           .type         = MT_DEVICE,
 121   }, {
 122           .virtual      = (u32)BAST_VA_PC104_IRQRAW,
 123           .pfn          = __phys_to_pfn(BAST_PA_PC104_IRQRAW),
 124           .length       = SZ_1M,
 125           .type         = MT_DEVICE,
 126   }, {
 127           .virtual      = (u32)BAST_VA_PC104_IRQMASK,
 128           .pfn          = __phys_to_pfn(BAST_PA_PC104_IRQMASK),
 129           .length       = SZ_1M,
 130           .type         = MT_DEVICE,
 131   },
 132
 133   /* peripheral space... one for each of fast/slow/byte/16bit */
 134   /* note, ide is only decoded in word space, even though some registers
 135    * are only 8bit */
 136
 137   /* slow, byte */
 138   { VA_C2(BAST_VA_ISAIO),   PA_CS2(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
 139   { VA_C2(BAST_VA_ISAMEM),  PA_CS2(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
 140   { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
 141
 142   /* slow, word */
 143   { VA_C3(BAST_VA_ISAIO),   PA_CS3(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
 144   { VA_C3(BAST_VA_ISAMEM),  PA_CS3(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
 145   { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
 146
 147   /* fast, byte */
 148   { VA_C4(BAST_VA_ISAIO),   PA_CS4(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
 149   { VA_C4(BAST_VA_ISAMEM),  PA_CS4(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
 150   { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
 151
 152   /* fast, word */
 153   { VA_C5(BAST_VA_ISAIO),   PA_CS5(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
 154   { VA_C5(BAST_VA_ISAMEM),  PA_CS5(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
 155   { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
 156 };
 157
 158 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 159 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 160 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
 161
 162 static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 163         [0] = {
 164                 .hwport      = 0,
 165                 .flags       = 0,
 166                 .ucon        = UCON,
 167                 .ulcon       = ULCON,
 168                 .ufcon       = UFCON,
 169         },
 170         [1] = {
 171                 .hwport      = 1,
 172                 .flags       = 0,
 173                 .ucon        = UCON,
 174                 .ulcon       = ULCON,
 175                 .ufcon       = UFCON,
 176         },
 177         /* port 2 is not actually used */
 178         [2] = {
 179                 .hwport      = 2,
 180                 .flags       = 0,
 181                 .ucon        = UCON,
 182                 .ulcon       = ULCON,
 183                 .ufcon       = UFCON,
 184         }
 185 };
 186
 187 /* NAND Flash on BAST board */
 188
 189 #ifdef CONFIG_PM
 190 static int bast_pm_suspend(void)
 191 {
 192         /* ensure that an nRESET is not generated on resume. */
 193         gpio_direction_output(S3C2410_GPA(21), 1);
 194         return 0;
 195 }
 196
 197 static void bast_pm_resume(void)
 198 {
 199         s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 200 }
 201
 202 #else
 203 #define bast_pm_suspend NULL
 204 #define bast_pm_resume NULL
 205 #endif
 206
 207 static struct syscore_ops bast_pm_syscore_ops = {
 208         .suspend        = bast_pm_suspend,
 209         .resume         = bast_pm_resume,
 210 };
 211
 212 static int smartmedia_map[] = { 0 };
 213 static int chip0_map[] = { 1 };
 214 static int chip1_map[] = { 2 };
 215 static int chip2_map[] = { 3 };
 216
 217 static struct mtd_partition __initdata bast_default_nand_part[] = {
 218         [0] = {
 219                 .name   = "Boot Agent",
 220                 .size   = SZ_16K,
 221                 .offset = 0,
 222         },
 223         [1] = {
 224                 .name   = "/boot",
 225                 .size   = SZ_4M - SZ_16K,
 226                 .offset = SZ_16K,
 227         },
 228         [2] = {
 229                 .name   = "user",
 230                 .offset = SZ_4M,
 231                 .size   = MTDPART_SIZ_FULL,
 232         }
 233 };
 234
 235 /* the bast has 4 selectable slots for nand-flash, the three
 236  * on-board chip areas, as well as the external SmartMedia
 237  * slot.
 238  *
 239  * Note, there is no current hot-plug support for the SmartMedia
 240  * socket.
 241 */
 242
 243 static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
 244         [0] = {
 245                 .name           = "SmartMedia",
 246                 .nr_chips       = 1,
 247                 .nr_map         = smartmedia_map,
 248                 .options        = NAND_SCAN_SILENT_NODEV,
 249                 .nr_partitions  = ARRAY_SIZE(bast_default_nand_part),
 250                 .partitions     = bast_default_nand_part,
 251         },
 252         [1] = {
 253                 .name           = "chip0",
 254                 .nr_chips       = 1,
 255                 .nr_map         = chip0_map,
 256                 .nr_partitions  = ARRAY_SIZE(bast_default_nand_part),
 257                 .partitions     = bast_default_nand_part,
 258         },
 259         [2] = {
 260                 .name           = "chip1",
 261                 .nr_chips       = 1,
 262                 .nr_map         = chip1_map,
 263                 .options        = NAND_SCAN_SILENT_NODEV,
 264                 .nr_partitions  = ARRAY_SIZE(bast_default_nand_part),
 265                 .partitions     = bast_default_nand_part,
 266         },
 267         [3] = {
 268                 .name           = "chip2",
 269                 .nr_chips       = 1,
 270                 .nr_map         = chip2_map,
 271                 .options        = NAND_SCAN_SILENT_NODEV,
 272                 .nr_partitions  = ARRAY_SIZE(bast_default_nand_part),
 273                 .partitions     = bast_default_nand_part,
 274         }
 275 };
 276
 277 static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
 278 {
 279         unsigned int tmp;
 280
 281         slot = set->nr_map[slot] & 3;
 282
 283         pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
 284                  slot, set, set->nr_map);
 285
 286         tmp = __raw_readb(BAST_VA_CTRL2);
 287         tmp &= BAST_CPLD_CTLR2_IDERST;
 288         tmp |= slot;
 289         tmp |= BAST_CPLD_CTRL2_WNAND;
 290
 291         pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
 292
 293         __raw_writeb(tmp, BAST_VA_CTRL2);
 294 }
 295
 296 static struct s3c2410_platform_nand __initdata bast_nand_info = {
 297         .tacls          = 30,
 298         .twrph0         = 60,
 299         .twrph1         = 60,
 300         .nr_sets        = ARRAY_SIZE(bast_nand_sets),
 301         .sets           = bast_nand_sets,
 302         .select_chip    = bast_nand_select,
 303 };
 304
 305 /* DM9000 */
 306
 307 static struct resource bast_dm9k_resource[] = {
 308         [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
 309         [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
 310         [2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
 311                                         | IORESOURCE_IRQ_HIGHLEVEL),
 312 };
 313
 314 /* for the moment we limit ourselves to 16bit IO until some
 315  * better IO routines can be written and tested
 316 */
 317
 318 static struct dm9000_plat_data bast_dm9k_platdata = {
 319         .flags          = DM9000_PLATF_16BITONLY,
 320 };
 321
 322 static struct platform_device bast_device_dm9k = {
 323         .name           = "dm9000",
 324         .id             = 0,
 325         .num_resources  = ARRAY_SIZE(bast_dm9k_resource),
 326         .resource       = bast_dm9k_resource,
 327         .dev            = {
 328                 .platform_data = &bast_dm9k_platdata,
 329         }
 330 };
 331
 332 /* serial devices */
 333
 334 #define SERIAL_BASE  (S3C2410_CS2 + BAST_PA_SUPERIO)
 335 #define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
 336 #define SERIAL_CLK   (1843200)
 337
 338 static struct plat_serial8250_port bast_sio_data[] = {
 339         [0] = {
 340                 .mapbase        = SERIAL_BASE + 0x2f8,
 341                 .irq            = BAST_IRQ_PCSERIAL1,
 342                 .flags          = SERIAL_FLAGS,
 343                 .iotype         = UPIO_MEM,
 344                 .regshift       = 0,
 345                 .uartclk        = SERIAL_CLK,
 346         },
 347         [1] = {
 348                 .mapbase        = SERIAL_BASE + 0x3f8,
 349                 .irq            = BAST_IRQ_PCSERIAL2,
 350                 .flags          = SERIAL_FLAGS,
 351                 .iotype         = UPIO_MEM,
 352                 .regshift       = 0,
 353                 .uartclk        = SERIAL_CLK,
 354         },
 355         { }
 356 };
 357
 358 static struct platform_device bast_sio = {
 359         .name                   = "serial8250",
 360         .id                     = PLAT8250_DEV_PLATFORM,
 361         .dev                    = {
 362                 .platform_data  = &bast_sio_data,
 363         },
 364 };
 365
 366 /* we have devices on the bus which cannot work much over the
 367  * standard 100KHz i2c bus frequency
 368 */
 369
 370 static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
 371         .flags          = 0,
 372         .slave_addr     = 0x10,
 373         .frequency      = 100*1000,
 374 };
 375
 376 /* Asix AX88796 10/100 ethernet controller */
 377
 378 static struct ax_plat_data bast_asix_platdata = {
 379         .flags          = AXFLG_MAC_FROMDEV,
 380         .wordlength     = 2,
 381         .dcr_val        = 0x48,
 382         .rcr_val        = 0x40,
 383 };
 384
 385 static struct resource bast_asix_resource[] = {
 386         [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
 387         [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
 388         [2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
 389 };
 390
 391 static struct platform_device bast_device_asix = {
 392         .name           = "ax88796",
 393         .id             = 0,
 394         .num_resources  = ARRAY_SIZE(bast_asix_resource),
 395         .resource       = bast_asix_resource,
 396         .dev            = {
 397                 .platform_data = &bast_asix_platdata
 398         }
 399 };
 400
 401 /* Asix AX88796 10/100 ethernet controller parallel port */
 402
 403 static struct resource bast_asixpp_resource[] = {
 404         [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \
 405                                         0x30 * 0x20),
 406 };
 407
 408 static struct platform_device bast_device_axpp = {
 409         .name           = "ax88796-pp",
 410         .id             = 0,
 411         .num_resources  = ARRAY_SIZE(bast_asixpp_resource),
 412         .resource       = bast_asixpp_resource,
 413 };
 414
 415 /* LCD/VGA controller */
 416
 417 static struct s3c2410fb_display __initdata bast_lcd_info[] = {
 418         {
 419                 .type           = S3C2410_LCDCON1_TFT,
 420                 .width          = 640,
 421                 .height         = 480,
 422
 423                 .pixclock       = 33333,
 424                 .xres           = 640,
 425                 .yres           = 480,
 426                 .bpp            = 4,
 427                 .left_margin    = 40,
 428                 .right_margin   = 20,
 429                 .hsync_len      = 88,
 430                 .upper_margin   = 30,
 431                 .lower_margin   = 32,
 432                 .vsync_len      = 3,
 433
 434                 .lcdcon5        = 0x00014b02,
 435         },
 436         {
 437                 .type           = S3C2410_LCDCON1_TFT,
 438                 .width          = 640,
 439                 .height         = 480,
 440
 441                 .pixclock       = 33333,
 442                 .xres           = 640,
 443                 .yres           = 480,
 444                 .bpp            = 8,
 445                 .left_margin    = 40,
 446                 .right_margin   = 20,
 447                 .hsync_len      = 88,
 448                 .upper_margin   = 30,
 449                 .lower_margin   = 32,
 450                 .vsync_len      = 3,
 451
 452                 .lcdcon5        = 0x00014b02,
 453         },
 454         {
 455                 .type           = S3C2410_LCDCON1_TFT,
 456                 .width          = 640,
 457                 .height         = 480,
 458
 459                 .pixclock       = 33333,
 460                 .xres           = 640,
 461                 .yres           = 480,
 462                 .bpp            = 16,
 463                 .left_margin    = 40,
 464                 .right_margin   = 20,
 465                 .hsync_len      = 88,
 466                 .upper_margin   = 30,
 467                 .lower_margin   = 32,
 468                 .vsync_len      = 3,
 469
 470                 .lcdcon5        = 0x00014b02,
 471         },
 472 };
 473
 474 /* LCD/VGA controller */
 475
 476 static struct s3c2410fb_mach_info __initdata bast_fb_info = {
 477
 478         .displays = bast_lcd_info,
 479         .num_displays = ARRAY_SIZE(bast_lcd_info),
 480         .default_display = 1,
 481 };
 482
 483 /* I2C devices fitted. */
 484
 485 static struct i2c_board_info bast_i2c_devs[] __initdata = {
 486         {
 487                 I2C_BOARD_INFO("tlv320aic23", 0x1a),
 488         }, {
 489                 I2C_BOARD_INFO("simtec-pmu", 0x6b),
 490         }, {
 491                 I2C_BOARD_INFO("ch7013", 0x75),
 492         },
 493 };
 494
 495 static struct s3c_hwmon_pdata bast_hwmon_info = {
 496         /* LCD contrast (0-6.6V) */
 497         .in[0] = &(struct s3c_hwmon_chcfg) {
 498                 .name           = "lcd-contrast",
 499                 .mult           = 3300,
 500                 .div            = 512,
 501         },
 502         /* LED current feedback */
 503         .in[1] = &(struct s3c_hwmon_chcfg) {
 504                 .name           = "led-feedback",
 505                 .mult           = 3300,
 506                 .div            = 1024,
 507         },
 508         /* LCD feedback (0-6.6V) */
 509         .in[2] = &(struct s3c_hwmon_chcfg) {
 510                 .name           = "lcd-feedback",
 511                 .mult           = 3300,
 512                 .div            = 512,
 513         },
 514         /* Vcore (1.8-2.0V), Vref 3.3V  */
 515         .in[3] = &(struct s3c_hwmon_chcfg) {
 516                 .name           = "vcore",
 517                 .mult           = 3300,
 518                 .div            = 1024,
 519         },
 520 };
 521
 522 /* Standard BAST devices */
 523 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 524
 525 static struct platform_device *bast_devices[] __initdata = {
 526         &s3c_device_ohci,
 527         &s3c_device_lcd,
 528         &s3c_device_wdt,
 529         &s3c_device_i2c0,
 530         &s3c_device_rtc,
 531         &s3c_device_nand,
 532         &s3c_device_adc,
 533         &s3c_device_hwmon,
 534         &bast_device_dm9k,
 535         &bast_device_asix,
 536         &bast_device_axpp,
 537         &bast_sio,
 538 };
 539
 540 static struct clk *bast_clocks[] __initdata = {
 541         &s3c24xx_dclk0,
 542         &s3c24xx_dclk1,
 543         &s3c24xx_clkout0,
 544         &s3c24xx_clkout1,
 545         &s3c24xx_uclk,
 546 };
 547
 548 static struct s3c_cpufreq_board __initdata bast_cpufreq = {
 549         .refresh        = 7800, /* 7.8usec */
 550         .auto_io        = 1,
 551         .need_io        = 1,
 552 };
 553
 554 static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
 555         .have_mic       = 1,
 556         .have_lout      = 1,
 557 };
 558
 559 static void __init bast_map_io(void)
 560 {
 561         /* initialise the clocks */
 562
 563         s3c24xx_dclk0.parent = &clk_upll;
 564         s3c24xx_dclk0.rate   = 12*1000*1000;
 565
 566         s3c24xx_dclk1.parent = &clk_upll;
 567         s3c24xx_dclk1.rate   = 24*1000*1000;
 568
 569         s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
 570         s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
 571
 572         s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 573
 574         s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 575
 576         s3c_hwmon_set_platdata(&bast_hwmon_info);
 577
 578         s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 579         s3c24xx_init_clocks(0);
 580         s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
 581         samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 582 }
 583
 584 static void __init bast_init(void)
 585 {
 586         register_syscore_ops(&bast_pm_syscore_ops);
 587
 588         s3c_i2c0_set_platdata(&bast_i2c_info);
 589         s3c_nand_set_platdata(&bast_nand_info);
 590         s3c24xx_fb_set_platdata(&bast_fb_info);
 591         platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 592
 593         i2c_register_board_info(0, bast_i2c_devs,
 594                                 ARRAY_SIZE(bast_i2c_devs));
 595
 596         usb_simtec_init();
 597         nor_simtec_init();
 598         simtec_audio_add(NULL, true, &bast_audio);
 599
 600         WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
 601
 602         s3c_cpufreq_setboard(&bast_cpufreq);
 603 }
 604
 605 MACHINE_START(BAST, "Simtec-BAST")
 606         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 607         .atag_offset    = 0x100,
 608         .map_io         = bast_map_io,
 609         .init_irq       = s3c2410_init_irq,
 610         .init_machine   = bast_init,
 611         .init_time      = samsung_timer_init,
 612         .restart        = s3c2410_restart,
 613 MACHINE_END