arch/arm/boot/dts/sun4i-a10-cubieboard.dts

   1 /*
   2  * Copyright 2012 Stefan Roese
   3  * Stefan Roese <sr@denx.de>
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 /dts-v1/;
  14 /include/ "sun4i-a10.dtsi"
  15 /include/ "sunxi-common-regulators.dtsi"
  16
  17 / {
  18         model = "Cubietech Cubieboard";
  19         compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
  20
  21         soc@01c00000 {
  22                 emac: ethernet@01c0b000 {
  23                         pinctrl-names = "default";
  24                         pinctrl-0 = <&emac_pins_a>;
  25                         phy = <&phy1>;
  26                         status = "okay";
  27                 };
  28
  29                 mdio@01c0b080 {
  30                         status = "okay";
  31
  32                         phy1: ethernet-phy@1 {
  33                                 reg = <1>;
  34                         };
  35                 };
  36
  37                 usbphy: phy@01c13400 {
  38                         usb1_vbus-supply = <&reg_usb1_vbus>;
  39                         usb2_vbus-supply = <&reg_usb2_vbus>;
  40                         status = "okay";
  41                 };
  42
  43                 ehci0: usb@01c14000 {
  44                         status = "okay";
  45                 };
  46
  47                 ohci0: usb@01c14400 {
  48                         status = "okay";
  49                 };
  50
  51                 ahci: sata@01c18000 {
  52                         target-supply = <&reg_ahci_5v>;
  53                         status = "okay";
  54                 };
  55
  56                 ehci1: usb@01c1c000 {
  57                         status = "okay";
  58                 };
  59
  60                 ohci1: usb@01c1c400 {
  61                         status = "okay";
  62                 };
  63
  64                 pinctrl@01c20800 {
  65                         led_pins_cubieboard: led_pins@0 {
  66                                 allwinner,pins = "PH20", "PH21";
  67                                 allwinner,function = "gpio_out";
  68                                 allwinner,drive = <1>;
  69                                 allwinner,pull = <0>;
  70                         };
  71                 };
  72
  73                 uart0: serial@01c28000 {
  74                         pinctrl-names = "default";
  75                         pinctrl-0 = <&uart0_pins_a>;
  76                         status = "okay";
  77                 };
  78
  79                 i2c0: i2c@01c2ac00 {
  80                         pinctrl-names = "default";
  81                         pinctrl-0 = <&i2c0_pins_a>;
  82                         status = "okay";
  83                 };
  84
  85                 i2c1: i2c@01c2b000 {
  86                         pinctrl-names = "default";
  87                         pinctrl-0 = <&i2c1_pins_a>;
  88                         status = "okay";
  89                 };
  90         };
  91
  92         leds {
  93                 compatible = "gpio-leds";
  94                 pinctrl-names = "default";
  95                 pinctrl-0 = <&led_pins_cubieboard>;
  96
  97                 blue {
  98                         label = "cubieboard:blue:usr";
  99                         gpios = <&pio 7 21 0>; /* LED1 */
 100                 };
 101
 102                 green {
 103                         label = "cubieboard:green:usr";
 104                         gpios = <&pio 7 20 0>; /* LED2 */
 105                         linux,default-trigger = "heartbeat";
 106                 };
 107         };
 108
 109         reg_ahci_5v: ahci-5v {
 110                 status = "okay";
 111         };
 112
 113         reg_usb1_vbus: usb1-vbus {
 114                 status = "okay";
 115         };
 116
 117         reg_usb2_vbus: usb2-vbus {
 118                 status = "okay";
 119         };
 120 };