arch/arm/boot/dts/omap3-sbc-t3530.dts

   1 /*
   2  * Suppport for CompuLab SBC-T3530 with CM-T3530
   3  */
   4
   5 #include "omap3-cm-t3530.dts"
   6 #include "omap3-sb-t35.dtsi"
   7
   8 / {
   9         model = "CompuLab SBC-T3530 with CM-T3530";
  10         compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
  11 };
  12
  13 &omap3_pmx_core {
  14         pinctrl-names = "default";
  15         pinctrl-0 = <&sb_t35_usb_hub_pins>;
  16
  17         sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
  18                 pinctrl-single,pins = <
  19                         OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
  20                 >;
  21         };
  22 };
  23
  24 /*
  25  * The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
  26  * SB-T35 baseboard respectively.
  27  * This setting includes both chips in SBC-T3530 board device tree.
  28  */
  29 &gpmc {
  30         ranges = <5 0 0x2c000000 0x01000000>,
  31                  <4 0 0x2d000000 0x01000000>;
  32 };
  33
  34 &mmc1 {
  35         cd-gpios =  <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
  36 };