arch/arm/boot/dts/omap3-gta04.dts

   1 /*
   2  * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
   3  *
   4  * Based on omap3-beagle-xm.dts
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 /dts-v1/;
  11
  12 #include "omap36xx.dtsi"
  13
  14 / {
  15         model = "OMAP3 GTA04";
  16         compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
  17
  18         cpus {
  19                 cpu@0 {
  20                         cpu0-supply = <&vcc>;
  21                 };
  22         };
  23
  24         memory {
  25                 device_type = "memory";
  26                 reg = <0x80000000 0x20000000>; /* 512 MB */
  27         };
  28
  29         gpio-keys {
  30                 compatible = "gpio-keys";
  31
  32                 aux-button {
  33                         label = "aux";
  34                         linux,code = <169>;
  35                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
  36                         gpio-key,wakeup;
  37                 };
  38         };
  39
  40         sound {
  41                 compatible = "ti,omap-twl4030";
  42                 ti,model = "gta04";
  43
  44                 ti,mcbsp = <&mcbsp2>;
  45                 ti,codec = <&twl_audio>;
  46         };
  47 };
  48
  49 &omap3_pmx_core {
  50         uart1_pins: pinmux_uart1_pins {
  51                 pinctrl-single,pins = <
  52                         0x152 (PIN_INPUT | MUX_MODE0)           /* uart1_rx.uart1_rx */
  53                         0x14c (PIN_OUTPUT |MUX_MODE0)           /* uart1_tx.uart1_tx */
  54                 >;
  55         };
  56
  57         uart2_pins: pinmux_uart2_pins {
  58                 pinctrl-single,pins = <
  59                         0x14a (PIN_INPUT | MUX_MODE0)           /* uart2_rx.uart2_rx */
  60                         0x148 (PIN_OUTPUT | MUX_MODE0)          /* uart2_tx.uart2_tx */
  61                 >;
  62         };
  63
  64         uart3_pins: pinmux_uart3_pins {
  65                 pinctrl-single,pins = <
  66                         0x16e (PIN_INPUT | MUX_MODE0)           /* uart3_rx.uart3_rx */
  67                         0x170 (PIN_OUTPUT | MUX_MODE0)          /* uart3_tx.uart3_tx */
  68                 >;
  69         };
  70
  71         mmc1_pins: pinmux_mmc1_pins {
  72                 pinctrl-single,pins = <
  73                         0x114 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_clk.sdmmc1_clk */
  74                         0x116 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_cmd.sdmmc1_cmd */
  75                         0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat0.sdmmc1_dat0 */
  76                         0x11a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat1.sdmmc1_dat1 */
  77                         0x11c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat2.sdmmc1_dat2 */
  78                         0x11e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat3.sdmmc1_dat3 */
  79                 >;
  80         };
  81 };
  82
  83 &i2c1 {
  84         clock-frequency = <2600000>;
  85
  86         twl: twl@48 {
  87                 reg = <0x48>;
  88                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
  89                 interrupt-parent = <&intc>;
  90         };
  91
  92         twl_audio: audio {
  93                 compatible = "ti,twl4030-audio";
  94                 codec {
  95                 };
  96         };
  97 };
  98
  99 #include "twl4030.dtsi"
 100 #include "twl4030_omap3.dtsi"
 101
 102 &i2c2 {
 103         clock-frequency = <400000>;
 104
 105         /* pressure sensor */
 106         bmp085@77 {
 107                 compatible = "bosch,bmp085";
 108                 reg = <0x77>;
 109                 interrupt-parent = <&gpio4>;
 110                 interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 111         };
 112
 113         /* accelerometer */
 114         bma180@41 {
 115                 compatible = "bosch,bma180";
 116                 reg = <0x41>;
 117                 interrupt-parent = <&gpio3>;
 118                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 119         };
 120
 121         /* leds */
 122         tca6507@45 {
 123                 compatible = "ti,tca6507";
 124                 #address-cells = <1>;
 125                 #size-cells = <0>;
 126                 reg = <0x45>;
 127
 128                 gta04_led0: red_aux@0 {
 129                         label = "gta04:red:aux";
 130                         reg = <0x0>;
 131                 };
 132
 133                 gta04_led1: green_aux@1 {
 134                         label = "gta04:green:aux";
 135                         reg = <0x1>;
 136                 };
 137
 138                 gta04_led3: red_power@3 {
 139                         label = "gta04:red:power";
 140                         reg = <0x3>;
 141                         linux,default-trigger = "default-on";
 142                 };
 143
 144                 gta04_led4: green_power@4 {
 145                         label = "gta04:green:power";
 146                         reg = <0x4>;
 147                 };
 148         };
 149
 150         /* compass aka magnetometer */
 151         hmc5843@1e {
 152                 compatible = "honeywell,hmc5843";
 153                 reg = <0x1e>;
 154         };
 155
 156         /* touchscreen */
 157         tsc2007@48 {
 158                 compatible = "ti,tsc2007";
 159                 reg = <0x48>;
 160                 interrupt-parent = <&gpio6>;
 161                 interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 162                 gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
 163                 ti,x-plate-ohms = <600>;
 164         };
 165 };
 166
 167 &i2c3 {
 168         clock-frequency = <100000>;
 169 };
 170
 171 &usb_otg_hs {
 172         interface-type = <0>;
 173         usb-phy = <&usb2_phy>;
 174         phys = <&usb2_phy>;
 175         phy-names = "usb2-phy";
 176         mode = <3>;
 177         power = <50>;
 178 };
 179
 180 &mmc1 {
 181         pinctrl-names = "default";
 182         pinctrl-0 = <&mmc1_pins>;
 183         vmmc-supply = <&vmmc1>;
 184         bus-width = <4>;
 185         ti,non-removable;
 186 };
 187
 188 &mmc2 {
 189         vmmc-supply = <&vaux4>;
 190         bus-width = <4>;
 191         ti,non-removable;
 192 };
 193
 194 &mmc3 {
 195         status = "disabled";
 196 };
 197
 198 &uart1 {
 199         pinctrl-names = "default";
 200         pinctrl-0 = <&uart1_pins>;
 201 };
 202
 203 &uart2 {
 204         pinctrl-names = "default";
 205         pinctrl-0 = <&uart2_pins>;
 206 };
 207
 208 &uart3 {
 209         pinctrl-names = "default";
 210         pinctrl-0 = <&uart3_pins>;
 211 };
 212
 213 &charger {
 214         bb_uvolt = <3200000>;
 215         bb_uamp = <150>;
 216 };
 217
 218 &vaux4 {
 219         regulator-min-microvolt = <2800000>;
 220         regulator-max-microvolt = <3150000>;
 221 };