arch/arm/boot/dts/imx25.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include "imx25-pinfunc.h"
  14
  15 / {
  16         aliases {
  17                 gpio0 = &gpio1;
  18                 gpio1 = &gpio2;
  19                 gpio2 = &gpio3;
  20                 gpio3 = &gpio4;
  21                 i2c0 = &i2c1;
  22                 i2c1 = &i2c2;
  23                 i2c2 = &i2c3;
  24                 serial0 = &uart1;
  25                 serial1 = &uart2;
  26                 serial2 = &uart3;
  27                 serial3 = &uart4;
  28                 serial4 = &uart5;
  29                 spi0 = &spi1;
  30                 spi1 = &spi2;
  31                 spi2 = &spi3;
  32                 usb0 = &usbotg;
  33                 usb1 = &usbhost1;
  34         };
  35
  36         cpus {
  37                 #address-cells = <0>;
  38                 #size-cells = <0>;
  39
  40                 cpu {
  41                         compatible = "arm,arm926ej-s";
  42                         device_type = "cpu";
  43                 };
  44         };
  45
  46         asic: asic-interrupt-controller@68000000 {
  47                 compatible = "fsl,imx25-asic", "fsl,avic";
  48                 interrupt-controller;
  49                 #interrupt-cells = <1>;
  50                 reg = <0x68000000 0x8000000>;
  51         };
  52
  53         clocks {
  54                 #address-cells = <1>;
  55                 #size-cells = <0>;
  56
  57                 osc {
  58                         compatible = "fsl,imx-osc", "fixed-clock";
  59                         clock-frequency = <24000000>;
  60                 };
  61         };
  62
  63         soc {
  64                 #address-cells = <1>;
  65                 #size-cells = <1>;
  66                 compatible = "simple-bus";
  67                 interrupt-parent = <&asic>;
  68                 ranges;
  69
  70                 aips@43f00000 { /* AIPS1 */
  71                         compatible = "fsl,aips-bus", "simple-bus";
  72                         #address-cells = <1>;
  73                         #size-cells = <1>;
  74                         reg = <0x43f00000 0x100000>;
  75                         ranges;
  76
  77                         i2c1: i2c@43f80000 {
  78                                 #address-cells = <1>;
  79                                 #size-cells = <0>;
  80                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
  81                                 reg = <0x43f80000 0x4000>;
  82                                 clocks = <&clks 48>;
  83                                 clock-names = "";
  84                                 interrupts = <3>;
  85                                 status = "disabled";
  86                         };
  87
  88                         i2c3: i2c@43f84000 {
  89                                 #address-cells = <1>;
  90                                 #size-cells = <0>;
  91                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
  92                                 reg = <0x43f84000 0x4000>;
  93                                 clocks = <&clks 48>;
  94                                 clock-names = "";
  95                                 interrupts = <10>;
  96                                 status = "disabled";
  97                         };
  98
  99                         can1: can@43f88000 {
 100                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 101                                 reg = <0x43f88000 0x4000>;
 102                                 interrupts = <43>;
 103                                 clocks = <&clks 75>, <&clks 75>;
 104                                 clock-names = "ipg", "per";
 105                                 status = "disabled";
 106                         };
 107
 108                         can2: can@43f8c000 {
 109                                 compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
 110                                 reg = <0x43f8c000 0x4000>;
 111                                 interrupts = <44>;
 112                                 clocks = <&clks 76>, <&clks 76>;
 113                                 clock-names = "ipg", "per";
 114                                 status = "disabled";
 115                         };
 116
 117                         uart1: serial@43f90000 {
 118                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 119                                 reg = <0x43f90000 0x4000>;
 120                                 interrupts = <45>;
 121                                 clocks = <&clks 120>, <&clks 57>;
 122                                 clock-names = "ipg", "per";
 123                                 status = "disabled";
 124                         };
 125
 126                         uart2: serial@43f94000 {
 127                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 128                                 reg = <0x43f94000 0x4000>;
 129                                 interrupts = <32>;
 130                                 clocks = <&clks 121>, <&clks 57>;
 131                                 clock-names = "ipg", "per";
 132                                 status = "disabled";
 133                         };
 134
 135                         i2c2: i2c@43f98000 {
 136                                 #address-cells = <1>;
 137                                 #size-cells = <0>;
 138                                 compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 139                                 reg = <0x43f98000 0x4000>;
 140                                 clocks = <&clks 48>;
 141                                 clock-names = "";
 142                                 interrupts = <4>;
 143                                 status = "disabled";
 144                         };
 145
 146                         owire@43f9c000 {
 147                                 #address-cells = <1>;
 148                                 #size-cells = <0>;
 149                                 reg = <0x43f9c000 0x4000>;
 150                                 clocks = <&clks 51>;
 151                                 clock-names = "";
 152                                 interrupts = <2>;
 153                                 status = "disabled";
 154                         };
 155
 156                         spi1: cspi@43fa4000 {
 157                                 #address-cells = <1>;
 158                                 #size-cells = <0>;
 159                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 160                                 reg = <0x43fa4000 0x4000>;
 161                                 clocks = <&clks 62>, <&clks 62>;
 162                                 clock-names = "ipg", "per";
 163                                 interrupts = <14>;
 164                                 status = "disabled";
 165                         };
 166
 167                         kpp@43fa8000 {
 168                                 #address-cells = <1>;
 169                                 #size-cells = <0>;
 170                                 reg = <0x43fa8000 0x4000>;
 171                                 clocks = <&clks 102>;
 172                                 clock-names = "";
 173                                 interrupts = <24>;
 174                                 status = "disabled";
 175                         };
 176
 177                         iomuxc: iomuxc@43fac000 {
 178                                 compatible = "fsl,imx25-iomuxc";
 179                                 reg = <0x43fac000 0x4000>;
 180                         };
 181
 182                         audmux: audmux@43fb0000 {
 183                                 compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
 184                                 reg = <0x43fb0000 0x4000>;
 185                                 status = "disabled";
 186                         };
 187                 };
 188
 189                 spba@50000000 {
 190                         compatible = "fsl,spba-bus", "simple-bus";
 191                         #address-cells = <1>;
 192                         #size-cells = <1>;
 193                         reg = <0x50000000 0x40000>;
 194                         ranges;
 195
 196                         spi3: cspi@50004000 {
 197                                 #address-cells = <1>;
 198                                 #size-cells = <0>;
 199                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 200                                 reg = <0x50004000 0x4000>;
 201                                 interrupts = <0>;
 202                                 clocks = <&clks 80>, <&clks 80>;
 203                                 clock-names = "ipg", "per";
 204                                 status = "disabled";
 205                         };
 206
 207                         uart4: serial@50008000 {
 208                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 209                                 reg = <0x50008000 0x4000>;
 210                                 interrupts = <5>;
 211                                 clocks = <&clks 123>, <&clks 57>;
 212                                 clock-names = "ipg", "per";
 213                                 status = "disabled";
 214                         };
 215
 216                         uart3: serial@5000c000 {
 217                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 218                                 reg = <0x5000c000 0x4000>;
 219                                 interrupts = <18>;
 220                                 clocks = <&clks 122>, <&clks 57>;
 221                                 clock-names = "ipg", "per";
 222                                 status = "disabled";
 223                         };
 224
 225                         spi2: cspi@50010000 {
 226                                 #address-cells = <1>;
 227                                 #size-cells = <0>;
 228                                 compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 229                                 reg = <0x50010000 0x4000>;
 230                                 clocks = <&clks 79>, <&clks 79>;
 231                                 clock-names = "ipg", "per";
 232                                 interrupts = <13>;
 233                                 status = "disabled";
 234                         };
 235
 236                         ssi2: ssi@50014000 {
 237                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 238                                 reg = <0x50014000 0x4000>;
 239                                 interrupts = <11>;
 240                                 clocks = <&clks 118>;
 241                                 clock-names = "ipg";
 242                                 dmas = <&sdma 24 1 0>,
 243                                        <&sdma 25 1 0>;
 244                                 dma-names = "rx", "tx";
 245                                 status = "disabled";
 246                         };
 247
 248                         esai@50018000 {
 249                                 reg = <0x50018000 0x4000>;
 250                                 interrupts = <7>;
 251                         };
 252
 253                         uart5: serial@5002c000 {
 254                                 compatible = "fsl,imx25-uart", "fsl,imx21-uart";
 255                                 reg = <0x5002c000 0x4000>;
 256                                 interrupts = <40>;
 257                                 clocks = <&clks 124>, <&clks 57>;
 258                                 clock-names = "ipg", "per";
 259                                 status = "disabled";
 260                         };
 261
 262                         tsc: tsc@50030000 {
 263                                 compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
 264                                 reg = <0x50030000 0x4000>;
 265                                 interrupts = <46>;
 266                                 clocks = <&clks 119>;
 267                                 clock-names = "ipg";
 268                                 status = "disabled";
 269                         };
 270
 271                         ssi1: ssi@50034000 {
 272                                 compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
 273                                 reg = <0x50034000 0x4000>;
 274                                 interrupts = <12>;
 275                                 clocks = <&clks 117>;
 276                                 clock-names = "ipg";
 277                                 dmas = <&sdma 28 1 0>,
 278                                        <&sdma 29 1 0>;
 279                                 dma-names = "rx", "tx";
 280                                 status = "disabled";
 281                         };
 282
 283                         fec: ethernet@50038000 {
 284                                 compatible = "fsl,imx25-fec";
 285                                 reg = <0x50038000 0x4000>;
 286                                 interrupts = <57>;
 287                                 clocks = <&clks 88>, <&clks 65>;
 288                                 clock-names = "ipg", "ahb";
 289                                 status = "disabled";
 290                         };
 291                 };
 292
 293                 aips@53f00000 { /* AIPS2 */
 294                         compatible = "fsl,aips-bus", "simple-bus";
 295                         #address-cells = <1>;
 296                         #size-cells = <1>;
 297                         reg = <0x53f00000 0x100000>;
 298                         ranges;
 299
 300                         clks: ccm@53f80000 {
 301                                 compatible = "fsl,imx25-ccm";
 302                                 reg = <0x53f80000 0x4000>;
 303                                 interrupts = <31>;
 304                                 #clock-cells = <1>;
 305                         };
 306
 307                         gpt4: timer@53f84000 {
 308                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 309                                 reg = <0x53f84000 0x4000>;
 310                                 clocks = <&clks 9>, <&clks 45>;
 311                                 clock-names = "ipg", "per";
 312                                 interrupts = <1>;
 313                         };
 314
 315                         gpt3: timer@53f88000 {
 316                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 317                                 reg = <0x53f88000 0x4000>;
 318                                 clocks = <&clks 9>, <&clks 47>;
 319                                 clock-names = "ipg", "per";
 320                                 interrupts = <29>;
 321                         };
 322
 323                         gpt2: timer@53f8c000 {
 324                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 325                                 reg = <0x53f8c000 0x4000>;
 326                                 clocks = <&clks 9>, <&clks 47>;
 327                                 clock-names = "ipg", "per";
 328                                 interrupts = <53>;
 329                         };
 330
 331                         gpt1: timer@53f90000 {
 332                                 compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
 333                                 reg = <0x53f90000 0x4000>;
 334                                 clocks = <&clks 9>, <&clks 47>;
 335                                 clock-names = "ipg", "per";
 336                                 interrupts = <54>;
 337                         };
 338
 339                         epit1: timer@53f94000 {
 340                                 compatible = "fsl,imx25-epit";
 341                                 reg = <0x53f94000 0x4000>;
 342                                 interrupts = <28>;
 343                         };
 344
 345                         epit2: timer@53f98000 {
 346                                 compatible = "fsl,imx25-epit";
 347                                 reg = <0x53f98000 0x4000>;
 348                                 interrupts = <27>;
 349                         };
 350
 351                         gpio4: gpio@53f9c000 {
 352                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 353                                 reg = <0x53f9c000 0x4000>;
 354                                 interrupts = <23>;
 355                                 gpio-controller;
 356                                 #gpio-cells = <2>;
 357                                 interrupt-controller;
 358                                 #interrupt-cells = <2>;
 359                         };
 360
 361                         pwm2: pwm@53fa0000 {
 362                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 363                                 #pwm-cells = <2>;
 364                                 reg = <0x53fa0000 0x4000>;
 365                                 clocks = <&clks 106>, <&clks 36>;
 366                                 clock-names = "ipg", "per";
 367                                 interrupts = <36>;
 368                         };
 369
 370                         gpio3: gpio@53fa4000 {
 371                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 372                                 reg = <0x53fa4000 0x4000>;
 373                                 interrupts = <16>;
 374                                 gpio-controller;
 375                                 #gpio-cells = <2>;
 376                                 interrupt-controller;
 377                                 #interrupt-cells = <2>;
 378                         };
 379
 380                         pwm3: pwm@53fa8000 {
 381                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 382                                 #pwm-cells = <2>;
 383                                 reg = <0x53fa8000 0x4000>;
 384                                 clocks = <&clks 107>, <&clks 36>;
 385                                 clock-names = "ipg", "per";
 386                                 interrupts = <41>;
 387                         };
 388
 389                         esdhc1: esdhc@53fb4000 {
 390                                 compatible = "fsl,imx25-esdhc";
 391                                 reg = <0x53fb4000 0x4000>;
 392                                 interrupts = <9>;
 393                                 clocks = <&clks 86>, <&clks 63>, <&clks 45>;
 394                                 clock-names = "ipg", "ahb", "per";
 395                                 status = "disabled";
 396                         };
 397
 398                         esdhc2: esdhc@53fb8000 {
 399                                 compatible = "fsl,imx25-esdhc";
 400                                 reg = <0x53fb8000 0x4000>;
 401                                 interrupts = <8>;
 402                                 clocks = <&clks 87>, <&clks 64>, <&clks 46>;
 403                                 clock-names = "ipg", "ahb", "per";
 404                                 status = "disabled";
 405                         };
 406
 407                         lcdc: lcdc@53fbc000 {
 408                                 compatible = "fsl,imx25-fb", "fsl,imx21-fb";
 409                                 reg = <0x53fbc000 0x4000>;
 410                                 interrupts = <39>;
 411                                 clocks = <&clks 103>, <&clks 66>, <&clks 49>;
 412                                 clock-names = "ipg", "ahb", "per";
 413                                 status = "disabled";
 414                         };
 415
 416                         slcdc@53fc0000 {
 417                                 reg = <0x53fc0000 0x4000>;
 418                                 interrupts = <38>;
 419                                 status = "disabled";
 420                         };
 421
 422                         pwm4: pwm@53fc8000 {
 423                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 424                                 reg = <0x53fc8000 0x4000>;
 425                                 clocks = <&clks 108>, <&clks 36>;
 426                                 clock-names = "ipg", "per";
 427                                 interrupts = <42>;
 428                         };
 429
 430                         gpio1: gpio@53fcc000 {
 431                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 432                                 reg = <0x53fcc000 0x4000>;
 433                                 interrupts = <52>;
 434                                 gpio-controller;
 435                                 #gpio-cells = <2>;
 436                                 interrupt-controller;
 437                                 #interrupt-cells = <2>;
 438                         };
 439
 440                         gpio2: gpio@53fd0000 {
 441                                 compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
 442                                 reg = <0x53fd0000 0x4000>;
 443                                 interrupts = <51>;
 444                                 gpio-controller;
 445                                 #gpio-cells = <2>;
 446                                 interrupt-controller;
 447                                 #interrupt-cells = <2>;
 448                         };
 449
 450                         sdma: sdma@53fd4000 {
 451                                 compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
 452                                 reg = <0x53fd4000 0x4000>;
 453                                 clocks = <&clks 112>, <&clks 68>;
 454                                 clock-names = "ipg", "ahb";
 455                                 #dma-cells = <3>;
 456                                 interrupts = <34>;
 457                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
 458                         };
 459
 460                         wdog@53fdc000 {
 461                                 compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
 462                                 reg = <0x53fdc000 0x4000>;
 463                                 clocks = <&clks 126>;
 464                                 clock-names = "";
 465                                 interrupts = <55>;
 466                         };
 467
 468                         pwm1: pwm@53fe0000 {
 469                                 compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 470                                 #pwm-cells = <2>;
 471                                 reg = <0x53fe0000 0x4000>;
 472                                 clocks = <&clks 105>, <&clks 36>;
 473                                 clock-names = "ipg", "per";
 474                                 interrupts = <26>;
 475                         };
 476
 477                         iim: iim@53ff0000 {
 478                                 compatible = "fsl,imx25-iim", "fsl,imx27-iim";
 479                                 reg = <0x53ff0000 0x4000>;
 480                                 interrupts = <19>;
 481                                 clocks = <&clks 99>;
 482                         };
 483
 484                         usbphy1: usbphy@1 {
 485                                 compatible = "nop-usbphy";
 486                                 status = "disabled";
 487                         };
 488
 489                         usbphy2: usbphy@2 {
 490                                 compatible = "nop-usbphy";
 491                                 status = "disabled";
 492                         };
 493
 494                         usbotg: usb@53ff4000 {
 495                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 496                                 reg = <0x53ff4000 0x0200>;
 497                                 interrupts = <37>;
 498                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 499                                 clock-names = "ipg", "ahb", "per";
 500                                 fsl,usbmisc = <&usbmisc 0>;
 501                                 status = "disabled";
 502                         };
 503
 504                         usbhost1: usb@53ff4400 {
 505                                 compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 506                                 reg = <0x53ff4400 0x0200>;
 507                                 interrupts = <35>;
 508                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 509                                 clock-names = "ipg", "ahb", "per";
 510                                 fsl,usbmisc = <&usbmisc 1>;
 511                                 status = "disabled";
 512                         };
 513
 514                         usbmisc: usbmisc@53ff4600 {
 515                                 #index-cells = <1>;
 516                                 compatible = "fsl,imx25-usbmisc";
 517                                 clocks = <&clks 9>, <&clks 70>, <&clks 8>;
 518                                 clock-names = "ipg", "ahb", "per";
 519                                 reg = <0x53ff4600 0x00f>;
 520                                 status = "disabled";
 521                         };
 522
 523                         dryice@53ffc000 {
 524                                 compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
 525                                 reg = <0x53ffc000 0x4000>;
 526                                 clocks = <&clks 81>;
 527                                 clock-names = "ipg";
 528                                 interrupts = <25>;
 529                         };
 530                 };
 531
 532                 emi@80000000 {
 533                         compatible = "fsl,emi-bus", "simple-bus";
 534                         #address-cells = <1>;
 535                         #size-cells = <1>;
 536                         reg = <0x80000000 0x3b002000>;
 537                         ranges;
 538
 539                         nfc: nand@bb000000 {
 540                                 #address-cells = <1>;
 541                                 #size-cells = <1>;
 542
 543                                 compatible = "fsl,imx25-nand";
 544                                 reg = <0xbb000000 0x2000>;
 545                                 clocks = <&clks 50>;
 546                                 clock-names = "";
 547                                 interrupts = <33>;
 548                                 status = "disabled";
 549                         };
 550                 };
 551         };
 552 };