* the values for DIV_COPY and DIV_HPM dividers need not be set.
*/
div0 = cfg_data->div0;
- if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) {
+ if (cpuclk->flags & CLK_CPU_HAS_DIV1) {
div1 = cfg_data->div1;
if (readl(base + E4210_SRC_CPU) & E4210_MUX_HPM_MASK)
div1 = readl(base + E4210_DIV_CPU1) &
alt_div = DIV_ROUND_UP(alt_prate, tmp_rate) - 1;
WARN_ON(alt_div >= MAX_DIV);
- if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+ if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) {
/*
* In Exynos4210, ATB clock parent is also mout_core. So
* ATB clock also needs to be mantained at safe speed.
writel(div0, base + E4210_DIV_CPU0);
wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, DIV_MASK_ALL);
- if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) {
+ if (cpuclk->flags & CLK_CPU_HAS_DIV1) {
writel(div1, base + E4210_DIV_CPU1);
wait_until_divider_stable(base + E4210_DIV_STAT_CPU1,
DIV_MASK_ALL);
unsigned long mux_reg;
/* find out the divider values to use for clock data */
- if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+ if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) {
while ((cfg_data->prate * 1000) != ndata->new_rate) {
if (cfg_data->prate == 0)
return -EINVAL;
writel(mux_reg & ~(1 << 16), base + E4210_SRC_CPU);
wait_until_mux_stable(base + E4210_STAT_CPU, 16, 1);
- if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+ if (cpuclk->flags & CLK_CPU_NEEDS_DEBUG_ALT_DIV) {
div |= (cfg_data->div0 & E4210_DIV0_ATB_MASK);
div_mask |= E4210_DIV0_ATB_MASK;
}
DT_CLK(NULL, "gpio2_ick", "gpio2_ick"),
DT_CLK(NULL, "wdt3_ick", "wdt3_ick"),
DT_CLK(NULL, "uart3_ick", "uart3_ick"),
- DT_CLK(NULL, "uart4_ick", "uart4_ick"),
DT_CLK(NULL, "gpt9_ick", "gpt9_ick"),
DT_CLK(NULL, "gpt8_ick", "gpt8_ick"),
DT_CLK(NULL, "gpt7_ick", "gpt7_ick"),
static struct ti_dt_clk omap36xx_clks[] = {
DT_CLK(NULL, "omap_192m_alwon_fck", "omap_192m_alwon_fck"),
DT_CLK(NULL, "uart4_fck", "uart4_fck"),
+ DT_CLK(NULL, "uart4_ick", "uart4_ick"),
{ .node_name = NULL },
};
#include "clock.h"
-#define DRA7_DPLL_ABE_DEFFREQ 180633600
#define DRA7_DPLL_GMAC_DEFFREQ 1000000000
#define DRA7_DPLL_USB_DEFFREQ 960000000
int __init dra7xx_dt_clk_init(void)
{
int rc;
- struct clk *abe_dpll_mux, *sys_clkin2, *dpll_ck, *hdcp_ck;
+ struct clk *dpll_ck, *hdcp_ck;
ti_dt_clocks_register(dra7xx_clks);
omap2_clk_disable_autoidle_all();
- abe_dpll_mux = clk_get_sys(NULL, "abe_dpll_sys_clk_mux");
- sys_clkin2 = clk_get_sys(NULL, "sys_clkin2");
- dpll_ck = clk_get_sys(NULL, "dpll_abe_ck");
-
- rc = clk_set_parent(abe_dpll_mux, sys_clkin2);
- if (!rc)
- rc = clk_set_rate(dpll_ck, DRA7_DPLL_ABE_DEFFREQ);
- if (rc)
- pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-
- dpll_ck = clk_get_sys(NULL, "dpll_abe_m2x2_ck");
- rc = clk_set_rate(dpll_ck, DRA7_DPLL_ABE_DEFFREQ * 2);
- if (rc)
- pr_err("%s: failed to configure ABE DPLL m2x2!\n", __func__);
-
dpll_ck = clk_get_sys(NULL, "dpll_gmac_ck");
rc = clk_set_rate(dpll_ck, DRA7_DPLL_GMAC_DEFFREQ);
if (rc)
}
}
- if (unlikely(!clk->enable_reg)) {
+ if (unlikely(IS_ERR(clk->enable_reg))) {
pr_err("%s: %s missing enable_reg\n", __func__,
clk_hw_get_name(hw));
ret = -EINVAL;
u32 v;
clk = to_clk_hw_omap(hw);
- if (!clk->enable_reg) {
+ if (IS_ERR(clk->enable_reg)) {
/*
* 'independent' here refers to a clock which is not
* controlled by its parent.