as root before you can use this. You'll probably also want to
get the user-space microcode_ctl utility to use with this.
-Powertweak
-----------
-
-If you are running v0.1.17 or earlier, you should upgrade to
-version v0.99.0 or higher. Running old versions may cause problems
-with programs using shared memory.
-
udev
----
udev is a userspace application for populating /dev dynamically with
------------------
o <http://www.urbanmyth.org/microcode/>
-Powertweak
-----------
-o <http://powertweak.sourceforge.net/>
-
udev
----
o <http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html>
</sect1>
<sect1><title>Wait queues and Wake events</title>
!Iinclude/linux/wait.h
-!Ekernel/wait.c
+!Ekernel/sched/wait.c
</sect1>
<sect1><title>High-resolution timers</title>
!Iinclude/linux/ktime.h
Required properties:
- compatible : Should be "ti,omap3-mpu" for OMAP3
Should be "ti,omap4-mpu" for OMAP4
+ Should be "ti,omap5-mpu" for OMAP5
- ti,hwmods: "mpu"
Examples:
+- For an OMAP5 SMP system:
+
+mpu {
+ compatible = "ti,omap5-mpu";
+ ti,hwmods = "mpu"
+};
+
- For an OMAP4 SMP system:
mpu {
Required properties:
- compatible : should be one of
+ "arm,armv8-pmuv3"
"arm,cortex-a15-pmu"
"arm,cortex-a9-pmu"
"arm,cortex-a8-pmu"
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
- pullup-uV = <1800000>;
+ pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;
Required Properties:
-- comptible: should be one of the following.
+- compatible: should be one of the following.
- "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
- "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
Required Properties:
-- comptible: should be one of the following.
+- compatible: should be one of the following.
- "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
- reg: physical base address of the controller and length of memory mapped
Required Properties:
-- comptible: should be one of the following.
+- compatible: should be one of the following.
- "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
- reg: physical base address of the controller and length of memory mapped
Required Properties:
-- comptible: should be "samsung,exynos5440-clock".
+- compatible: should be "samsung,exynos5440-clock".
- reg: physical base address of the controller and length of memory mapped
region.
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller). See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
Required properties:
-- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
- 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ.
- - interrupt-parent : Phandle for the interrupt controller that
- services interrupts for this device.
-- gpio-controller : Marks the port as GPIO controller.
+- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+ for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+ "fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells: Should be two. The first cell is the pin number
+ and the second cell is used to specify optional
+ parameters (currently unused).
+- interrupt-parent: Phandle for the interrupt controller that
+ services interrupts for this device.
+- interrupts: Interrupt mapping for GPIO IRQ.
+- gpio-controller: Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller: Empty boolean property which marks the GPIO
+ module as an IRQ controller.
+- #interrupt-cells: Should be two. Defines the number of integer
+ cells required to specify an interrupt within
+ this interrupt controller. The first cell
+ defines the pin number, the second cell
+ defines additional flags (trigger type,
+ trigger polarity). Note that the available
+ set of trigger conditions supported by the
+ GPIO module depends on the actual SoC.
Example of gpio-controller nodes for a MPC8347 SoC:
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
- interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
+ interrupts = <74 0x8>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
- interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
+ interrupts = <75 0x8>;
gpio-controller;
};
-See booting-without-of.txt for details of how to specify GPIO
-information for devices.
-
-To use GPIO pins as interrupt sources for peripherals, specify the
-GPIO controller as the interrupt parent and define GPIO number +
-trigger mode using the interrupts property, which is defined like
-this:
-
-interrupts = <number trigger>, where:
- - number: GPIO pin (0..31)
- - trigger: trigger mode:
- 2 = trigger on falling edge
- 3 = trigger on both edges
-
-Example of device using this is:
+Example of a peripheral using the GPIO module as an IRQ controller:
funkyfpga@0 {
compatible = "funky-fpga";
...
- interrupts = <4 3>;
interrupt-parent = <&gpio1>;
+ interrupts = <4 3>;
};
I2C for OMAP platforms
Required properties :
-- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
+ or "ti,omap4-i2c"
- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
- #address-cells = <1>;
- #size-cells = <0>;
--- /dev/null
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+ instance starting 1
+
+Examples:
+
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+ instance starting 1
+
+Examples:
+
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
only if property "phy-reset-gpios" is available. Missing the property
will have the duration be 1 millisecond. Numbers greater than 1000 are
invalid and 1 millisecond will be used instead.
+- phy-supply: regulator that powers the Ethernet PHY.
Example:
phy-mode = "mii";
phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
+ phy-supply = <®_fec_supply>;
};
--- /dev/null
+Qualcomm MSM pseudo random number generator.
+
+Required properties:
+
+- compatible : should be "qcom,prng"
+- reg : specifies base physical address and size of the registers map
+- clocks : phandle to clock-controller plus clock-specifier pair
+- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
+
+Example:
+
+ rng@f9bff000 {
+ compatible = "qcom,prng";
+ reg = <0xf9bff000 0x200>;
+ clocks = <&clock GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+++ /dev/null
-NVIDIA Tegra 2 SPI device
-
-Required properties:
-- compatible : should be "nvidia,tegra20-spi".
-- gpios : should specify GPIOs used for chipselect.
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+gmt Global Mixed-mode Technology, Inc.
hisilicon Hisilicon Limited.
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
img Imagination Technologies Ltd.
intercontrol Inter Control Group
+lg LG Corporation
linux Linux-specific binding
lsi LSI Corp. (LSI Logic)
marvell Marvell Technology Group Ltd.
+++ /dev/null
-GPIO Interfaces
-
-This provides an overview of GPIO access conventions on Linux.
-
-These calls use the gpio_* naming prefix. No other calls should use that
-prefix, or the related __gpio_* prefix.
-
-
-What is a GPIO?
-===============
-A "General Purpose Input/Output" (GPIO) is a flexible software-controlled
-digital signal. They are provided from many kinds of chip, and are familiar
-to Linux developers working with embedded and custom hardware. Each GPIO
-represents a bit connected to a particular pin, or "ball" on Ball Grid Array
-(BGA) packages. Board schematics show which external hardware connects to
-which GPIOs. Drivers can be written generically, so that board setup code
-passes such pin configuration data to drivers.
-
-System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every
-non-dedicated pin can be configured as a GPIO; and most chips have at least
-several dozen of them. Programmable logic devices (like FPGAs) can easily
-provide GPIOs; multifunction chips like power managers, and audio codecs
-often have a few such pins to help with pin scarcity on SOCs; and there are
-also "GPIO Expander" chips that connect using the I2C or SPI serial busses.
-Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS
-firmware knowing how they're used).
-
-The exact capabilities of GPIOs vary between systems. Common options:
-
- - Output values are writable (high=1, low=0). Some chips also have
- options about how that value is driven, so that for example only one
- value might be driven ... supporting "wire-OR" and similar schemes
- for the other value (notably, "open drain" signaling).
-
- - Input values are likewise readable (1, 0). Some chips support readback
- of pins configured as "output", which is very useful in such "wire-OR"
- cases (to support bidirectional signaling). GPIO controllers may have
- input de-glitch/debounce logic, sometimes with software controls.
-
- - Inputs can often be used as IRQ signals, often edge triggered but
- sometimes level triggered. Such IRQs may be configurable as system
- wakeup events, to wake the system from a low power state.
-
- - Usually a GPIO will be configurable as either input or output, as needed
- by different product boards; single direction ones exist too.
-
- - Most GPIOs can be accessed while holding spinlocks, but those accessed
- through a serial bus normally can't. Some systems support both types.
-
-On a given board each GPIO is used for one specific purpose like monitoring
-MMC/SD card insertion/removal, detecting card writeprotect status, driving
-a LED, configuring a transceiver, bitbanging a serial bus, poking a hardware
-watchdog, sensing a switch, and so on.
-
-
-GPIO conventions
-================
-Note that this is called a "convention" because you don't need to do it this
-way, and it's no crime if you don't. There **are** cases where portability
-is not the main issue; GPIOs are often used for the kind of board-specific
-glue logic that may even change between board revisions, and can't ever be
-used on a board that's wired differently. Only least-common-denominator
-functionality can be very portable. Other features are platform-specific,
-and that can be critical for glue logic.
-
-Plus, this doesn't require any implementation framework, just an interface.
-One platform might implement it as simple inline functions accessing chip
-registers; another might implement it by delegating through abstractions
-used for several very different kinds of GPIO controller. (There is some
-optional code supporting such an implementation strategy, described later
-in this document, but drivers acting as clients to the GPIO interface must
-not care how it's implemented.)
-
-That said, if the convention is supported on their platform, drivers should
-use it when possible. Platforms must select ARCH_REQUIRE_GPIOLIB or
-ARCH_WANT_OPTIONAL_GPIOLIB in their Kconfig. Drivers that can't work without
-standard GPIO calls should have Kconfig entries which depend on GPIOLIB. The
-GPIO calls are available, either as "real code" or as optimized-away stubs,
-when drivers use the include file:
-
- #include <linux/gpio.h>
-
-If you stick to this convention then it'll be easier for other developers to
-see what your code is doing, and help maintain it.
-
-Note that these operations include I/O barriers on platforms which need to
-use them; drivers don't need to add them explicitly.
-
-
-Identifying GPIOs
------------------
-GPIOs are identified by unsigned integers in the range 0..MAX_INT. That
-reserves "negative" numbers for other purposes like marking signals as
-"not available on this board", or indicating faults. Code that doesn't
-touch the underlying hardware treats these integers as opaque cookies.
-
-Platforms define how they use those integers, and usually #define symbols
-for the GPIO lines so that board-specific setup code directly corresponds
-to the relevant schematics. In contrast, drivers should only use GPIO
-numbers passed to them from that setup code, using platform_data to hold
-board-specific pin configuration data (along with other board specific
-data they need). That avoids portability problems.
-
-So for example one platform uses numbers 32-159 for GPIOs; while another
-uses numbers 0..63 with one set of GPIO controllers, 64-79 with another
-type of GPIO controller, and on one particular board 80-95 with an FPGA.
-The numbers need not be contiguous; either of those platforms could also
-use numbers 2000-2063 to identify GPIOs in a bank of I2C GPIO expanders.
-
-If you want to initialize a structure with an invalid GPIO number, use
-some negative number (perhaps "-EINVAL"); that will never be valid. To
-test if such number from such a structure could reference a GPIO, you
-may use this predicate:
-
- int gpio_is_valid(int number);
-
-A number that's not valid will be rejected by calls which may request
-or free GPIOs (see below). Other numbers may also be rejected; for
-example, a number might be valid but temporarily unused on a given board.
-
-Whether a platform supports multiple GPIO controllers is a platform-specific
-implementation issue, as are whether that support can leave "holes" in the space
-of GPIO numbers, and whether new controllers can be added at runtime. Such issues
-can affect things including whether adjacent GPIO numbers are both valid.
-
-Using GPIOs
------------
-The first thing a system should do with a GPIO is allocate it, using
-the gpio_request() call; see later.
-
-One of the next things to do with a GPIO, often in board setup code when
-setting up a platform_device using the GPIO, is mark its direction:
-
- /* set as input or output, returning 0 or negative errno */
- int gpio_direction_input(unsigned gpio);
- int gpio_direction_output(unsigned gpio, int value);
-
-The return value is zero for success, else a negative errno. It should
-be checked, since the get/set calls don't have error returns and since
-misconfiguration is possible. You should normally issue these calls from
-a task context. However, for spinlock-safe GPIOs it's OK to use them
-before tasking is enabled, as part of early board setup.
-
-For output GPIOs, the value provided becomes the initial output value.
-This helps avoid signal glitching during system startup.
-
-For compatibility with legacy interfaces to GPIOs, setting the direction
-of a GPIO implicitly requests that GPIO (see below) if it has not been
-requested already. That compatibility is being removed from the optional
-gpiolib framework.
-
-Setting the direction can fail if the GPIO number is invalid, or when
-that particular GPIO can't be used in that mode. It's generally a bad
-idea to rely on boot firmware to have set the direction correctly, since
-it probably wasn't validated to do more than boot Linux. (Similarly,
-that board setup code probably needs to multiplex that pin as a GPIO,
-and configure pullups/pulldowns appropriately.)
-
-
-Spinlock-Safe GPIO access
--------------------------
-Most GPIO controllers can be accessed with memory read/write instructions.
-Those don't need to sleep, and can safely be done from inside hard
-(nonthreaded) IRQ handlers and similar contexts.
-
-Use the following calls to access such GPIOs,
-for which gpio_cansleep() will always return false (see below):
-
- /* GPIO INPUT: return zero or nonzero */
- int gpio_get_value(unsigned gpio);
-
- /* GPIO OUTPUT */
- void gpio_set_value(unsigned gpio, int value);
-
-The values are boolean, zero for low, nonzero for high. When reading the
-value of an output pin, the value returned should be what's seen on the
-pin ... that won't always match the specified output value, because of
-issues including open-drain signaling and output latencies.
-
-The get/set calls have no error returns because "invalid GPIO" should have
-been reported earlier from gpio_direction_*(). However, note that not all
-platforms can read the value of output pins; those that can't should always
-return zero. Also, using these calls for GPIOs that can't safely be accessed
-without sleeping (see below) is an error.
-
-Platform-specific implementations are encouraged to optimize the two
-calls to access the GPIO value in cases where the GPIO number (and for
-output, value) are constant. It's normal for them to need only a couple
-of instructions in such cases (reading or writing a hardware register),
-and not to need spinlocks. Such optimized calls can make bitbanging
-applications a lot more efficient (in both space and time) than spending
-dozens of instructions on subroutine calls.
-
-
-GPIO access that may sleep
---------------------------
-Some GPIO controllers must be accessed using message based busses like I2C
-or SPI. Commands to read or write those GPIO values require waiting to
-get to the head of a queue to transmit a command and get its response.
-This requires sleeping, which can't be done from inside IRQ handlers.
-
-Platforms that support this type of GPIO distinguish them from other GPIOs
-by returning nonzero from this call (which requires a valid GPIO number,
-which should have been previously allocated with gpio_request):
-
- int gpio_cansleep(unsigned gpio);
-
-To access such GPIOs, a different set of accessors is defined:
-
- /* GPIO INPUT: return zero or nonzero, might sleep */
- int gpio_get_value_cansleep(unsigned gpio);
-
- /* GPIO OUTPUT, might sleep */
- void gpio_set_value_cansleep(unsigned gpio, int value);
-
-
-Accessing such GPIOs requires a context which may sleep, for example
-a threaded IRQ handler, and those accessors must be used instead of
-spinlock-safe accessors without the cansleep() name suffix.
-
-Other than the fact that these accessors might sleep, and will work
-on GPIOs that can't be accessed from hardIRQ handlers, these calls act
-the same as the spinlock-safe calls.
-
- ** IN ADDITION ** calls to setup and configure such GPIOs must be made
-from contexts which may sleep, since they may need to access the GPIO
-controller chip too: (These setup calls are usually made from board
-setup or driver probe/teardown code, so this is an easy constraint.)
-
- gpio_direction_input()
- gpio_direction_output()
- gpio_request()
-
-## gpio_request_one()
-## gpio_request_array()
-## gpio_free_array()
-
- gpio_free()
- gpio_set_debounce()
-
-
-
-Claiming and Releasing GPIOs
-----------------------------
-To help catch system configuration errors, two calls are defined.
-
- /* request GPIO, returning 0 or negative errno.
- * non-null labels may be useful for diagnostics.
- */
- int gpio_request(unsigned gpio, const char *label);
-
- /* release previously-claimed GPIO */
- void gpio_free(unsigned gpio);
-
-Passing invalid GPIO numbers to gpio_request() will fail, as will requesting
-GPIOs that have already been claimed with that call. The return value of
-gpio_request() must be checked. You should normally issue these calls from
-a task context. However, for spinlock-safe GPIOs it's OK to request GPIOs
-before tasking is enabled, as part of early board setup.
-
-These calls serve two basic purposes. One is marking the signals which
-are actually in use as GPIOs, for better diagnostics; systems may have
-several hundred potential GPIOs, but often only a dozen are used on any
-given board. Another is to catch conflicts, identifying errors when
-(a) two or more drivers wrongly think they have exclusive use of that
-signal, or (b) something wrongly believes it's safe to remove drivers
-needed to manage a signal that's in active use. That is, requesting a
-GPIO can serve as a kind of lock.
-
-Some platforms may also use knowledge about what GPIOs are active for
-power management, such as by powering down unused chip sectors and, more
-easily, gating off unused clocks.
-
-For GPIOs that use pins known to the pinctrl subsystem, that subsystem should
-be informed of their use; a gpiolib driver's .request() operation may call
-pinctrl_request_gpio(), and a gpiolib driver's .free() operation may call
-pinctrl_free_gpio(). The pinctrl subsystem allows a pinctrl_request_gpio()
-to succeed concurrently with a pin or pingroup being "owned" by a device for
-pin multiplexing.
-
-Any programming of pin multiplexing hardware that is needed to route the
-GPIO signal to the appropriate pin should occur within a GPIO driver's
-.direction_input() or .direction_output() operations, and occur after any
-setup of an output GPIO's value. This allows a glitch-free migration from a
-pin's special function to GPIO. This is sometimes required when using a GPIO
-to implement a workaround on signals typically driven by a non-GPIO HW block.
-
-Some platforms allow some or all GPIO signals to be routed to different pins.
-Similarly, other aspects of the GPIO or pin may need to be configured, such as
-pullup/pulldown. Platform software should arrange that any such details are
-configured prior to gpio_request() being called for those GPIOs, e.g. using
-the pinctrl subsystem's mapping table, so that GPIO users need not be aware
-of these details.
-
-Also note that it's your responsibility to have stopped using a GPIO
-before you free it.
-
-Considering in most cases GPIOs are actually configured right after they
-are claimed, three additional calls are defined:
-
- /* request a single GPIO, with initial configuration specified by
- * 'flags', identical to gpio_request() wrt other arguments and
- * return value
- */
- int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
-
- /* request multiple GPIOs in a single call
- */
- int gpio_request_array(struct gpio *array, size_t num);
-
- /* release multiple GPIOs in a single call
- */
- void gpio_free_array(struct gpio *array, size_t num);
-
-where 'flags' is currently defined to specify the following properties:
-
- * GPIOF_DIR_IN - to configure direction as input
- * GPIOF_DIR_OUT - to configure direction as output
-
- * GPIOF_INIT_LOW - as output, set initial level to LOW
- * GPIOF_INIT_HIGH - as output, set initial level to HIGH
- * GPIOF_OPEN_DRAIN - gpio pin is open drain type.
- * GPIOF_OPEN_SOURCE - gpio pin is open source type.
-
- * GPIOF_EXPORT_DIR_FIXED - export gpio to sysfs, keep direction
- * GPIOF_EXPORT_DIR_CHANGEABLE - also export, allow changing direction
-
-since GPIOF_INIT_* are only valid when configured as output, so group valid
-combinations as:
-
- * GPIOF_IN - configure as input
- * GPIOF_OUT_INIT_LOW - configured as output, initial level LOW
- * GPIOF_OUT_INIT_HIGH - configured as output, initial level HIGH
-
-When setting the flag as GPIOF_OPEN_DRAIN then it will assume that pins is
-open drain type. Such pins will not be driven to 1 in output mode. It is
-require to connect pull-up on such pins. By enabling this flag, gpio lib will
-make the direction to input when it is asked to set value of 1 in output mode
-to make the pin HIGH. The pin is make to LOW by driving value 0 in output mode.
-
-When setting the flag as GPIOF_OPEN_SOURCE then it will assume that pins is
-open source type. Such pins will not be driven to 0 in output mode. It is
-require to connect pull-down on such pin. By enabling this flag, gpio lib will
-make the direction to input when it is asked to set value of 0 in output mode
-to make the pin LOW. The pin is make to HIGH by driving value 1 in output mode.
-
-In the future, these flags can be extended to support more properties.
-
-Further more, to ease the claim/release of multiple GPIOs, 'struct gpio' is
-introduced to encapsulate all three fields as:
-
- struct gpio {
- unsigned gpio;
- unsigned long flags;
- const char *label;
- };
-
-A typical example of usage:
-
- static struct gpio leds_gpios[] = {
- { 32, GPIOF_OUT_INIT_HIGH, "Power LED" }, /* default to ON */
- { 33, GPIOF_OUT_INIT_LOW, "Green LED" }, /* default to OFF */
- { 34, GPIOF_OUT_INIT_LOW, "Red LED" }, /* default to OFF */
- { 35, GPIOF_OUT_INIT_LOW, "Blue LED" }, /* default to OFF */
- { ... },
- };
-
- err = gpio_request_one(31, GPIOF_IN, "Reset Button");
- if (err)
- ...
-
- err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios));
- if (err)
- ...
-
- gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios));
-
-
-GPIOs mapped to IRQs
---------------------
-GPIO numbers are unsigned integers; so are IRQ numbers. These make up
-two logically distinct namespaces (GPIO 0 need not use IRQ 0). You can
-map between them using calls like:
-
- /* map GPIO numbers to IRQ numbers */
- int gpio_to_irq(unsigned gpio);
-
- /* map IRQ numbers to GPIO numbers (avoid using this) */
- int irq_to_gpio(unsigned irq);
-
-Those return either the corresponding number in the other namespace, or
-else a negative errno code if the mapping can't be done. (For example,
-some GPIOs can't be used as IRQs.) It is an unchecked error to use a GPIO
-number that wasn't set up as an input using gpio_direction_input(), or
-to use an IRQ number that didn't originally come from gpio_to_irq().
-
-These two mapping calls are expected to cost on the order of a single
-addition or subtraction. They're not allowed to sleep.
-
-Non-error values returned from gpio_to_irq() can be passed to request_irq()
-or free_irq(). They will often be stored into IRQ resources for platform
-devices, by the board-specific initialization code. Note that IRQ trigger
-options are part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are
-system wakeup capabilities.
-
-Non-error values returned from irq_to_gpio() would most commonly be used
-with gpio_get_value(), for example to initialize or update driver state
-when the IRQ is edge-triggered. Note that some platforms don't support
-this reverse mapping, so you should avoid using it.
-
-
-Emulating Open Drain Signals
-----------------------------
-Sometimes shared signals need to use "open drain" signaling, where only the
-low signal level is actually driven. (That term applies to CMOS transistors;
-"open collector" is used for TTL.) A pullup resistor causes the high signal
-level. This is sometimes called a "wire-AND"; or more practically, from the
-negative logic (low=true) perspective this is a "wire-OR".
-
-One common example of an open drain signal is a shared active-low IRQ line.
-Also, bidirectional data bus signals sometimes use open drain signals.
-
-Some GPIO controllers directly support open drain outputs; many don't. When
-you need open drain signaling but your hardware doesn't directly support it,
-there's a common idiom you can use to emulate it with any GPIO pin that can
-be used as either an input or an output:
-
- LOW: gpio_direction_output(gpio, 0) ... this drives the signal
- and overrides the pullup.
-
- HIGH: gpio_direction_input(gpio) ... this turns off the output,
- so the pullup (or some other device) controls the signal.
-
-If you are "driving" the signal high but gpio_get_value(gpio) reports a low
-value (after the appropriate rise time passes), you know some other component
-is driving the shared signal low. That's not necessarily an error. As one
-common example, that's how I2C clocks are stretched: a slave that needs a
-slower clock delays the rising edge of SCK, and the I2C master adjusts its
-signaling rate accordingly.
-
-
-GPIO controllers and the pinctrl subsystem
-------------------------------------------
-
-A GPIO controller on a SOC might be tightly coupled with the pinctrl
-subsystem, in the sense that the pins can be used by other functions
-together with an optional gpio feature. We have already covered the
-case where e.g. a GPIO controller need to reserve a pin or set the
-direction of a pin by calling any of:
-
-pinctrl_request_gpio()
-pinctrl_free_gpio()
-pinctrl_gpio_direction_input()
-pinctrl_gpio_direction_output()
-
-But how does the pin control subsystem cross-correlate the GPIO
-numbers (which are a global business) to a certain pin on a certain
-pin controller?
-
-This is done by registering "ranges" of pins, which are essentially
-cross-reference tables. These are described in
-Documentation/pinctrl.txt
-
-While the pin allocation is totally managed by the pinctrl subsystem,
-gpio (under gpiolib) is still maintained by gpio drivers. It may happen
-that different pin ranges in a SoC is managed by different gpio drivers.
-
-This makes it logical to let gpio drivers announce their pin ranges to
-the pin ctrl subsystem before it will call 'pinctrl_request_gpio' in order
-to request the corresponding pin to be prepared by the pinctrl subsystem
-before any gpio usage.
-
-For this, the gpio controller can register its pin range with pinctrl
-subsystem. There are two ways of doing it currently: with or without DT.
-
-For with DT support refer to Documentation/devicetree/bindings/gpio/gpio.txt.
-
-For non-DT support, user can call gpiochip_add_pin_range() with appropriate
-parameters to register a range of gpio pins with a pinctrl driver. For this
-exact name string of pinctrl device has to be passed as one of the
-argument to this routine.
-
-
-What do these conventions omit?
-===============================
-One of the biggest things these conventions omit is pin multiplexing, since
-this is highly chip-specific and nonportable. One platform might not need
-explicit multiplexing; another might have just two options for use of any
-given pin; another might have eight options per pin; another might be able
-to route a given GPIO to any one of several pins. (Yes, those examples all
-come from systems that run Linux today.)
-
-Related to multiplexing is configuration and enabling of the pullups or
-pulldowns integrated on some platforms. Not all platforms support them,
-or support them in the same way; and any given board might use external
-pullups (or pulldowns) so that the on-chip ones should not be used.
-(When a circuit needs 5 kOhm, on-chip 100 kOhm resistors won't do.)
-Likewise drive strength (2 mA vs 20 mA) and voltage (1.8V vs 3.3V) is a
-platform-specific issue, as are models like (not) having a one-to-one
-correspondence between configurable pins and GPIOs.
-
-There are other system-specific mechanisms that are not specified here,
-like the aforementioned options for input de-glitching and wire-OR output.
-Hardware may support reading or writing GPIOs in gangs, but that's usually
-configuration dependent: for GPIOs sharing the same bank. (GPIOs are
-commonly grouped in banks of 16 or 32, with a given SOC having several such
-banks.) Some systems can trigger IRQs from output GPIOs, or read values
-from pins not managed as GPIOs. Code relying on such mechanisms will
-necessarily be nonportable.
-
-Dynamic definition of GPIOs is not currently standard; for example, as
-a side effect of configuring an add-on board with some GPIO expanders.
-
-
-GPIO implementor's framework (OPTIONAL)
-=======================================
-As noted earlier, there is an optional implementation framework making it
-easier for platforms to support different kinds of GPIO controller using
-the same programming interface. This framework is called "gpiolib".
-
-As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file
-will be found there. That will list all the controllers registered through
-this framework, and the state of the GPIOs currently in use.
-
-
-Controller Drivers: gpio_chip
------------------------------
-In this framework each GPIO controller is packaged as a "struct gpio_chip"
-with information common to each controller of that type:
-
- - methods to establish GPIO direction
- - methods used to access GPIO values
- - flag saying whether calls to its methods may sleep
- - optional debugfs dump method (showing extra state like pullup config)
- - label for diagnostics
-
-There is also per-instance data, which may come from device.platform_data:
-the number of its first GPIO, and how many GPIOs it exposes.
-
-The code implementing a gpio_chip should support multiple instances of the
-controller, possibly using the driver model. That code will configure each
-gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be
-rare; use gpiochip_remove() when it is unavoidable.
-
-Most often a gpio_chip is part of an instance-specific structure with state
-not exposed by the GPIO interfaces, such as addressing, power management,
-and more. Chips such as codecs will have complex non-GPIO state.
-
-Any debugfs dump method should normally ignore signals which haven't been
-requested as GPIOs. They can use gpiochip_is_requested(), which returns
-either NULL or the label associated with that GPIO when it was requested.
-
-
-Platform Support
-----------------
-To support this framework, a platform's Kconfig will "select" either
-ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
-and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
-three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
-
-It may also provide a custom value for ARCH_NR_GPIOS, so that it better
-reflects the number of GPIOs in actual use on that platform, without
-wasting static table space. (It should count both built-in/SoC GPIOs and
-also ones on GPIO expanders.
-
-ARCH_REQUIRE_GPIOLIB means that the gpiolib code will always get compiled
-into the kernel on that architecture.
-
-ARCH_WANT_OPTIONAL_GPIOLIB means the gpiolib code defaults to off and the user
-can enable it and build it into the kernel optionally.
-
-If neither of these options are selected, the platform does not support
-GPIOs through GPIO-lib and the code cannot be enabled by the user.
-
-Trivial implementations of those functions can directly use framework
-code, which always dispatches through the gpio_chip:
-
- #define gpio_get_value __gpio_get_value
- #define gpio_set_value __gpio_set_value
- #define gpio_cansleep __gpio_cansleep
-
-Fancier implementations could instead define those as inline functions with
-logic optimizing access to specific SOC-based GPIOs. For example, if the
-referenced GPIO is the constant "12", getting or setting its value could
-cost as little as two or three instructions, never sleeping. When such an
-optimization is not possible those calls must delegate to the framework
-code, costing at least a few dozen instructions. For bitbanged I/O, such
-instruction savings can be significant.
-
-For SOCs, platform-specific code defines and registers gpio_chip instances
-for each bank of on-chip GPIOs. Those GPIOs should be numbered/labeled to
-match chip vendor documentation, and directly match board schematics. They
-may well start at zero and go up to a platform-specific limit. Such GPIOs
-are normally integrated into platform initialization to make them always be
-available, from arch_initcall() or earlier; they can often serve as IRQs.
-
-
-Board Support
--------------
-For external GPIO controllers -- such as I2C or SPI expanders, ASICs, multi
-function devices, FPGAs or CPLDs -- most often board-specific code handles
-registering controller devices and ensures that their drivers know what GPIO
-numbers to use with gpiochip_add(). Their numbers often start right after
-platform-specific GPIOs.
-
-For example, board setup code could create structures identifying the range
-of GPIOs that chip will expose, and passes them to each GPIO expander chip
-using platform_data. Then the chip driver's probe() routine could pass that
-data to gpiochip_add().
-
-Initialization order can be important. For example, when a device relies on
-an I2C-based GPIO, its probe() routine should only be called after that GPIO
-becomes available. That may mean the device should not be registered until
-calls for that GPIO can work. One way to address such dependencies is for
-such gpio_chip controllers to provide setup() and teardown() callbacks to
-board specific code; those board specific callbacks would register devices
-once all the necessary resources are available, and remove them later when
-the GPIO controller device becomes unavailable.
-
-
-Sysfs Interface for Userspace (OPTIONAL)
-========================================
-Platforms which use the "gpiolib" implementors framework may choose to
-configure a sysfs user interface to GPIOs. This is different from the
-debugfs interface, since it provides control over GPIO direction and
-value instead of just showing a gpio state summary. Plus, it could be
-present on production systems without debugging support.
-
-Given appropriate hardware documentation for the system, userspace could
-know for example that GPIO #23 controls the write protect line used to
-protect boot loader segments in flash memory. System upgrade procedures
-may need to temporarily remove that protection, first importing a GPIO,
-then changing its output state, then updating the code before re-enabling
-the write protection. In normal use, GPIO #23 would never be touched,
-and the kernel would have no need to know about it.
-
-Again depending on appropriate hardware documentation, on some systems
-userspace GPIO can be used to determine system configuration data that
-standard kernels won't know about. And for some tasks, simple userspace
-GPIO drivers could be all that the system really needs.
-
-Note that standard kernel drivers exist for common "LEDs and Buttons"
-GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those
-instead of talking directly to the GPIOs; they integrate with kernel
-frameworks better than your userspace code could.
-
-
-Paths in Sysfs
---------------
-There are three kinds of entry in /sys/class/gpio:
-
- - Control interfaces used to get userspace control over GPIOs;
-
- - GPIOs themselves; and
-
- - GPIO controllers ("gpio_chip" instances).
-
-That's in addition to standard files including the "device" symlink.
-
-The control interfaces are write-only:
-
- /sys/class/gpio/
-
- "export" ... Userspace may ask the kernel to export control of
- a GPIO to userspace by writing its number to this file.
-
- Example: "echo 19 > export" will create a "gpio19" node
- for GPIO #19, if that's not requested by kernel code.
-
- "unexport" ... Reverses the effect of exporting to userspace.
-
- Example: "echo 19 > unexport" will remove a "gpio19"
- node exported using the "export" file.
-
-GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
-and have the following read/write attributes:
-
- /sys/class/gpio/gpioN/
-
- "direction" ... reads as either "in" or "out". This value may
- normally be written. Writing as "out" defaults to
- initializing the value as low. To ensure glitch free
- operation, values "low" and "high" may be written to
- configure the GPIO as an output with that initial value.
-
- Note that this attribute *will not exist* if the kernel
- doesn't support changing the direction of a GPIO, or
- it was exported by kernel code that didn't explicitly
- allow userspace to reconfigure this GPIO's direction.
-
- "value" ... reads as either 0 (low) or 1 (high). If the GPIO
- is configured as an output, this value may be written;
- any nonzero value is treated as high.
-
- If the pin can be configured as interrupt-generating interrupt
- and if it has been configured to generate interrupts (see the
- description of "edge"), you can poll(2) on that file and
- poll(2) will return whenever the interrupt was triggered. If
- you use poll(2), set the events POLLPRI and POLLERR. If you
- use select(2), set the file descriptor in exceptfds. After
- poll(2) returns, either lseek(2) to the beginning of the sysfs
- file and read the new value or close the file and re-open it
- to read the value.
-
- "edge" ... reads as either "none", "rising", "falling", or
- "both". Write these strings to select the signal edge(s)
- that will make poll(2) on the "value" file return.
-
- This file exists only if the pin can be configured as an
- interrupt generating input pin.
-
- "active_low" ... reads as either 0 (false) or 1 (true). Write
- any nonzero value to invert the value attribute both
- for reading and writing. Existing and subsequent
- poll(2) support configuration via the edge attribute
- for "rising" and "falling" edges will follow this
- setting.
-
-GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
-controller implementing GPIOs starting at #42) and have the following
-read-only attributes:
-
- /sys/class/gpio/gpiochipN/
-
- "base" ... same as N, the first GPIO managed by this chip
-
- "label" ... provided for diagnostics (not always unique)
-
- "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
-
-Board documentation should in most cases cover what GPIOs are used for
-what purposes. However, those numbers are not always stable; GPIOs on
-a daughtercard might be different depending on the base board being used,
-or other cards in the stack. In such cases, you may need to use the
-gpiochip nodes (possibly in conjunction with schematics) to determine
-the correct GPIO number to use for a given signal.
-
-
-Exporting from Kernel code
---------------------------
-Kernel code can explicitly manage exports of GPIOs which have already been
-requested using gpio_request():
-
- /* export the GPIO to userspace */
- int gpio_export(unsigned gpio, bool direction_may_change);
-
- /* reverse gpio_export() */
- void gpio_unexport();
-
- /* create a sysfs link to an exported GPIO node */
- int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
-
- /* change the polarity of a GPIO node in sysfs */
- int gpio_sysfs_set_active_low(unsigned gpio, int value);
-
-After a kernel driver requests a GPIO, it may only be made available in
-the sysfs interface by gpio_export(). The driver can control whether the
-signal direction may change. This helps drivers prevent userspace code
-from accidentally clobbering important system state.
-
-This explicit exporting can help with debugging (by making some kinds
-of experiments easier), or can provide an always-there interface that's
-suitable for documenting as part of a board support package.
-
-After the GPIO has been exported, gpio_export_link() allows creating
-symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
-use this to provide the interface under their own device in sysfs with
-a descriptive name.
-
-Drivers can use gpio_sysfs_set_active_low() to hide GPIO line polarity
-differences between boards from user space. This only affects the
-sysfs interface. Polarity change can be done both before and after
-gpio_export(), and previously enabled poll(2) support for either
-rising or falling edge will be reconfigured to follow this setting.
--- /dev/null
+00-INDEX
+ - This file
+gpio.txt
+ - Introduction to GPIOs and their kernel interfaces
+consumer.txt
+ - How to obtain and use GPIOs in a driver
+driver.txt
+ - How to write a GPIO driver
+board.txt
+ - How to assign GPIOs to a consumer device and a function
+sysfs.txt
+ - Information about the GPIO sysfs interface
+gpio-legacy.txt
+ - Historical documentation of the deprecated GPIO integer interface
--- /dev/null
+GPIO Mappings
+=============
+
+This document explains how GPIOs can be assigned to given devices and functions.
+Note that it only applies to the new descriptor-based interface. For a
+description of the deprecated integer-based GPIO interface please refer to
+gpio-legacy.txt (actually, there is no real mapping possible with the old
+interface; you just fetch an integer from somewhere and request the
+corresponding GPIO.
+
+Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage
+is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in
+their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to
+describe its hardware layout. Currently, mappings can be defined through device
+tree, ACPI, and platform data.
+
+Device Tree
+-----------
+GPIOs can easily be mapped to devices and functions in the device tree. The
+exact way to do it depends on the GPIO controller providing the GPIOs, see the
+device tree bindings for your controller.
+
+GPIOs mappings are defined in the consumer device's node, in a property named
+<function>-gpios, where <function> is the function the driver will request
+through gpiod_get(). For example:
+
+ foo_device {
+ compatible = "acme,foo";
+ ...
+ led-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>, /* red */
+ <&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
+ <&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
+
+ power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+This property will make GPIOs 15, 16 and 17 available to the driver under the
+"led" function, and GPIO 1 as the "power" GPIO:
+
+ struct gpio_desc *red, *green, *blue, *power;
+
+ red = gpiod_get_index(dev, "led", 0);
+ green = gpiod_get_index(dev, "led", 1);
+ blue = gpiod_get_index(dev, "led", 2);
+
+ power = gpiod_get(dev, "power");
+
+The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
+gpiod_is_active_low(power) will be true).
+
+ACPI
+----
+ACPI does not support function names for GPIOs. Therefore, only the "idx"
+argument of gpiod_get_index() is useful to discriminate between GPIOs assigned
+to a device. The "con_id" argument can still be set for debugging purposes (it
+will appear under error messages as well as debug and sysfs nodes).
+
+Platform Data
+-------------
+Finally, GPIOs can be bound to devices and functions using platform data. Board
+files that desire to do so need to include the following header:
+
+ #include <linux/gpio/driver.h>
+
+GPIOs are mapped by the means of tables of lookups, containing instances of the
+gpiod_lookup structure. Two macros are defined to help declaring such mappings:
+
+ GPIO_LOOKUP(chip_label, chip_hwnum, dev_id, con_id, flags)
+ GPIO_LOOKUP_IDX(chip_label, chip_hwnum, dev_id, con_id, idx, flags)
+
+where
+
+ - chip_label is the label of the gpiod_chip instance providing the GPIO
+ - chip_hwnum is the hardware number of the GPIO within the chip
+ - dev_id is the identifier of the device that will make use of this GPIO. If
+ NULL, the GPIO will be available to all devices.
+ - con_id is the name of the GPIO function from the device point of view. It
+ can be NULL.
+ - idx is the index of the GPIO within the function.
+ - flags is defined to specify the following properties:
+ * GPIOF_ACTIVE_LOW - to configure the GPIO as active-low
+ * GPIOF_OPEN_DRAIN - GPIO pin is open drain type.
+ * GPIOF_OPEN_SOURCE - GPIO pin is open source type.
+
+In the future, these flags might be extended to support more properties.
+
+Note that GPIO_LOOKUP() is just a shortcut to GPIO_LOOKUP_IDX() where idx = 0.
+
+A lookup table can then be defined as follows:
+
+ struct gpiod_lookup gpios_table[] = {
+ GPIO_LOOKUP_IDX("gpio.0", 15, "foo.0", "led", 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio.0", 16, "foo.0", "led", 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio.0", 17, "foo.0", "led", 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio.0", 1, "foo.0", "power", GPIO_ACTIVE_LOW),
+ };
+
+And the table can be added by the board code as follows:
+
+ gpiod_add_table(gpios_table, ARRAY_SIZE(gpios_table));
+
+The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
+
+ struct gpio_desc *red, *green, *blue, *power;
+
+ red = gpiod_get_index(dev, "led", 0);
+ green = gpiod_get_index(dev, "led", 1);
+ blue = gpiod_get_index(dev, "led", 2);
+
+ power = gpiod_get(dev, "power");
+ gpiod_direction_output(power, 1);
+
+Since the "power" GPIO is mapped as active-low, its actual signal will be 0
+after this code. Contrary to the legacy integer GPIO interface, the active-low
+property is handled during mapping and is thus transparent to GPIO consumers.
--- /dev/null
+GPIO Descriptor Consumer Interface
+==================================
+
+This document describes the consumer interface of the GPIO framework. Note that
+it describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+
+Guidelines for GPIOs consumers
+==============================
+
+Drivers that can't work without standard GPIO calls should have Kconfig entries
+that depend on GPIOLIB. The functions that allow a driver to obtain and use
+GPIOs are available by including the following file:
+
+ #include <linux/gpio/consumer.h>
+
+All the functions that work with the descriptor-based GPIO interface are
+prefixed with gpiod_. The gpio_ prefix is used for the legacy interface. No
+other function in the kernel should use these prefixes.
+
+
+Obtaining and Disposing GPIOs
+=============================
+
+With the descriptor-based interface, GPIOs are identified with an opaque,
+non-forgeable handler that must be obtained through a call to one of the
+gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the
+device that will use the GPIO and the function the requested GPIO is supposed to
+fulfill:
+
+ struct gpio_desc *gpiod_get(struct device *dev, const char *con_id)
+
+If a function is implemented by using several GPIOs together (e.g. a simple LED
+device that displays digits), an additional index argument can be specified:
+
+ struct gpio_desc *gpiod_get_index(struct device *dev,
+ const char *con_id, unsigned int idx)
+
+Both functions return either a valid GPIO descriptor, or an error code checkable
+with IS_ERR(). They will never return a NULL pointer.
+
+Device-managed variants of these functions are also defined:
+
+ struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id)
+
+ struct gpio_desc *devm_gpiod_get_index(struct device *dev,
+ const char *con_id,
+ unsigned int idx)
+
+A GPIO descriptor can be disposed of using the gpiod_put() function:
+
+ void gpiod_put(struct gpio_desc *desc)
+
+It is strictly forbidden to use a descriptor after calling this function. The
+device-managed variant is, unsurprisingly:
+
+ void devm_gpiod_put(struct device *dev, struct gpio_desc *desc)
+
+
+Using GPIOs
+===========
+
+Setting Direction
+-----------------
+The first thing a driver must do with a GPIO is setting its direction. This is
+done by invoking one of the gpiod_direction_*() functions:
+
+ int gpiod_direction_input(struct gpio_desc *desc)
+ int gpiod_direction_output(struct gpio_desc *desc, int value)
+
+The return value is zero for success, else a negative errno. It should be
+checked, since the get/set calls don't return errors and since misconfiguration
+is possible. You should normally issue these calls from a task context. However,
+for spinlock-safe GPIOs it is OK to use them before tasking is enabled, as part
+of early board setup.
+
+For output GPIOs, the value provided becomes the initial output value. This
+helps avoid signal glitching during system startup.
+
+A driver can also query the current direction of a GPIO:
+
+ int gpiod_get_direction(const struct gpio_desc *desc)
+
+This function will return either GPIOF_DIR_IN or GPIOF_DIR_OUT.
+
+Be aware that there is no default direction for GPIOs. Therefore, **using a GPIO
+without setting its direction first is illegal and will result in undefined
+behavior!**
+
+
+Spinlock-Safe GPIO Access
+-------------------------
+Most GPIO controllers can be accessed with memory read/write instructions. Those
+don't need to sleep, and can safely be done from inside hard (non-threaded) IRQ
+handlers and similar contexts.
+
+Use the following calls to access GPIOs from an atomic context:
+
+ int gpiod_get_value(const struct gpio_desc *desc);
+ void gpiod_set_value(struct gpio_desc *desc, int value);
+
+The values are boolean, zero for low, nonzero for high. When reading the value
+of an output pin, the value returned should be what's seen on the pin. That
+won't always match the specified output value, because of issues including
+open-drain signaling and output latencies.
+
+The get/set calls do not return errors because "invalid GPIO" should have been
+reported earlier from gpiod_direction_*(). However, note that not all platforms
+can read the value of output pins; those that can't should always return zero.
+Also, using these calls for GPIOs that can't safely be accessed without sleeping
+(see below) is an error.
+
+
+GPIO Access That May Sleep
+--------------------------
+Some GPIO controllers must be accessed using message based buses like I2C or
+SPI. Commands to read or write those GPIO values require waiting to get to the
+head of a queue to transmit a command and get its response. This requires
+sleeping, which can't be done from inside IRQ handlers.
+
+Platforms that support this type of GPIO distinguish them from other GPIOs by
+returning nonzero from this call:
+
+ int gpiod_cansleep(const struct gpio_desc *desc)
+
+To access such GPIOs, a different set of accessors is defined:
+
+ int gpiod_get_value_cansleep(const struct gpio_desc *desc)
+ void gpiod_set_value_cansleep(struct gpio_desc *desc, int value)
+
+Accessing such GPIOs requires a context which may sleep, for example a threaded
+IRQ handler, and those accessors must be used instead of spinlock-safe
+accessors without the cansleep() name suffix.
+
+Other than the fact that these accessors might sleep, and will work on GPIOs
+that can't be accessed from hardIRQ handlers, these calls act the same as the
+spinlock-safe calls.
+
+
+Active-low State and Raw GPIO Values
+------------------------------------
+Device drivers like to manage the logical state of a GPIO, i.e. the value their
+device will actually receive, no matter what lies between it and the GPIO line.
+In some cases, it might make sense to control the actual GPIO line value. The
+following set of calls ignore the active-low property of a GPIO and work on the
+raw line value:
+
+ int gpiod_get_raw_value(const struct gpio_desc *desc)
+ void gpiod_set_raw_value(struct gpio_desc *desc, int value)
+ int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
+ void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
+
+The active-low state of a GPIO can also be queried using the following call:
+
+ int gpiod_is_active_low(const struct gpio_desc *desc)
+
+Note that these functions should only be used with great moderation ; a driver
+should not have to care about the physical line level.
+
+GPIOs mapped to IRQs
+--------------------
+GPIO lines can quite often be used as IRQs. You can get the IRQ number
+corresponding to a given GPIO using the following call:
+
+ int gpiod_to_irq(const struct gpio_desc *desc)
+
+It will return an IRQ number, or an negative errno code if the mapping can't be
+done (most likely because that particular GPIO cannot be used as IRQ). It is an
+unchecked error to use a GPIO that wasn't set up as an input using
+gpiod_direction_input(), or to use an IRQ number that didn't originally come
+from gpiod_to_irq(). gpiod_to_irq() is not allowed to sleep.
+
+Non-error values returned from gpiod_to_irq() can be passed to request_irq() or
+free_irq(). They will often be stored into IRQ resources for platform devices,
+by the board-specific initialization code. Note that IRQ trigger options are
+part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup
+capabilities.
+
+
+Interacting With the Legacy GPIO Subsystem
+==========================================
+Many kernel subsystems still handle GPIOs using the legacy integer-based
+interface. Although it is strongly encouraged to upgrade them to the safer
+descriptor-based API, the following two functions allow you to convert a GPIO
+descriptor into the GPIO integer namespace and vice-versa:
+
+ int desc_to_gpio(const struct gpio_desc *desc)
+ struct gpio_desc *gpio_to_desc(unsigned gpio)
+
+The GPIO number returned by desc_to_gpio() can be safely used as long as the
+GPIO descriptor has not been freed. All the same, a GPIO number passed to
+gpio_to_desc() must have been properly acquired, and usage of the returned GPIO
+descriptor is only possible after the GPIO number has been released.
+
+Freeing a GPIO obtained by one API with the other API is forbidden and an
+unchecked error.
--- /dev/null
+GPIO Descriptor Driver Interface
+================================
+
+This document serves as a guide for GPIO chip drivers writers. Note that it
+describes the new descriptor-based interface. For a description of the
+deprecated integer-based GPIO interface please refer to gpio-legacy.txt.
+
+Each GPIO controller driver needs to include the following header, which defines
+the structures used to define a GPIO driver:
+
+ #include <linux/gpio/driver.h>
+
+
+Internal Representation of GPIOs
+================================
+
+Inside a GPIO driver, individual GPIOs are identified by their hardware number,
+which is a unique number between 0 and n, n being the number of GPIOs managed by
+the chip. This number is purely internal: the hardware number of a particular
+GPIO descriptor is never made visible outside of the driver.
+
+On top of this internal number, each GPIO also need to have a global number in
+the integer GPIO namespace so that it can be used with the legacy GPIO
+interface. Each chip must thus have a "base" number (which can be automatically
+assigned), and for each GPIO the global number will be (base + hardware number).
+Although the integer representation is considered deprecated, it still has many
+users and thus needs to be maintained.
+
+So for example one platform could use numbers 32-159 for GPIOs, with a
+controller defining 128 GPIOs at a "base" of 32 ; while another platform uses
+numbers 0..63 with one set of GPIO controllers, 64-79 with another type of GPIO
+controller, and on one particular board 80-95 with an FPGA. The numbers need not
+be contiguous; either of those platforms could also use numbers 2000-2063 to
+identify GPIOs in a bank of I2C GPIO expanders.
+
+
+Controller Drivers: gpio_chip
+=============================
+
+In the gpiolib framework each GPIO controller is packaged as a "struct
+gpio_chip" (see linux/gpio/driver.h for its complete definition) with members
+common to each controller of that type:
+
+ - methods to establish GPIO direction
+ - methods used to access GPIO values
+ - method to return the IRQ number associated to a given GPIO
+ - flag saying whether calls to its methods may sleep
+ - optional debugfs dump method (showing extra state like pullup config)
+ - optional base number (will be automatically assigned if omitted)
+ - label for diagnostics and GPIOs mapping using platform data
+
+The code implementing a gpio_chip should support multiple instances of the
+controller, possibly using the driver model. That code will configure each
+gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be rare;
+use gpiochip_remove() when it is unavoidable.
+
+Most often a gpio_chip is part of an instance-specific structure with state not
+exposed by the GPIO interfaces, such as addressing, power management, and more.
+Chips such as codecs will have complex non-GPIO state.
+
+Any debugfs dump method should normally ignore signals which haven't been
+requested as GPIOs. They can use gpiochip_is_requested(), which returns either
+NULL or the label associated with that GPIO when it was requested.
+
+Locking IRQ usage
+-----------------
+Input GPIOs can be used as IRQ signals. When this happens, a driver is requested
+to mark the GPIO as being used as an IRQ:
+
+ int gpiod_lock_as_irq(struct gpio_desc *desc)
+
+This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock
+is released:
+
+ void gpiod_unlock_as_irq(struct gpio_desc *desc)
--- /dev/null
+GPIO Interfaces
+
+This provides an overview of GPIO access conventions on Linux.
+
+These calls use the gpio_* naming prefix. No other calls should use that
+prefix, or the related __gpio_* prefix.
+
+
+What is a GPIO?
+===============
+A "General Purpose Input/Output" (GPIO) is a flexible software-controlled
+digital signal. They are provided from many kinds of chip, and are familiar
+to Linux developers working with embedded and custom hardware. Each GPIO
+represents a bit connected to a particular pin, or "ball" on Ball Grid Array
+(BGA) packages. Board schematics show which external hardware connects to
+which GPIOs. Drivers can be written generically, so that board setup code
+passes such pin configuration data to drivers.
+
+System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every
+non-dedicated pin can be configured as a GPIO; and most chips have at least
+several dozen of them. Programmable logic devices (like FPGAs) can easily
+provide GPIOs; multifunction chips like power managers, and audio codecs
+often have a few such pins to help with pin scarcity on SOCs; and there are
+also "GPIO Expander" chips that connect using the I2C or SPI serial busses.
+Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS
+firmware knowing how they're used).
+
+The exact capabilities of GPIOs vary between systems. Common options:
+
+ - Output values are writable (high=1, low=0). Some chips also have
+ options about how that value is driven, so that for example only one
+ value might be driven ... supporting "wire-OR" and similar schemes
+ for the other value (notably, "open drain" signaling).
+
+ - Input values are likewise readable (1, 0). Some chips support readback
+ of pins configured as "output", which is very useful in such "wire-OR"
+ cases (to support bidirectional signaling). GPIO controllers may have
+ input de-glitch/debounce logic, sometimes with software controls.
+
+ - Inputs can often be used as IRQ signals, often edge triggered but
+ sometimes level triggered. Such IRQs may be configurable as system
+ wakeup events, to wake the system from a low power state.
+
+ - Usually a GPIO will be configurable as either input or output, as needed
+ by different product boards; single direction ones exist too.
+
+ - Most GPIOs can be accessed while holding spinlocks, but those accessed
+ through a serial bus normally can't. Some systems support both types.
+
+On a given board each GPIO is used for one specific purpose like monitoring
+MMC/SD card insertion/removal, detecting card writeprotect status, driving
+a LED, configuring a transceiver, bitbanging a serial bus, poking a hardware
+watchdog, sensing a switch, and so on.
+
+
+GPIO conventions
+================
+Note that this is called a "convention" because you don't need to do it this
+way, and it's no crime if you don't. There **are** cases where portability
+is not the main issue; GPIOs are often used for the kind of board-specific
+glue logic that may even change between board revisions, and can't ever be
+used on a board that's wired differently. Only least-common-denominator
+functionality can be very portable. Other features are platform-specific,
+and that can be critical for glue logic.
+
+Plus, this doesn't require any implementation framework, just an interface.
+One platform might implement it as simple inline functions accessing chip
+registers; another might implement it by delegating through abstractions
+used for several very different kinds of GPIO controller. (There is some
+optional code supporting such an implementation strategy, described later
+in this document, but drivers acting as clients to the GPIO interface must
+not care how it's implemented.)
+
+That said, if the convention is supported on their platform, drivers should
+use it when possible. Platforms must select ARCH_REQUIRE_GPIOLIB or
+ARCH_WANT_OPTIONAL_GPIOLIB in their Kconfig. Drivers that can't work without
+standard GPIO calls should have Kconfig entries which depend on GPIOLIB. The
+GPIO calls are available, either as "real code" or as optimized-away stubs,
+when drivers use the include file:
+
+ #include <linux/gpio.h>
+
+If you stick to this convention then it'll be easier for other developers to
+see what your code is doing, and help maintain it.
+
+Note that these operations include I/O barriers on platforms which need to
+use them; drivers don't need to add them explicitly.
+
+
+Identifying GPIOs
+-----------------
+GPIOs are identified by unsigned integers in the range 0..MAX_INT. That
+reserves "negative" numbers for other purposes like marking signals as
+"not available on this board", or indicating faults. Code that doesn't
+touch the underlying hardware treats these integers as opaque cookies.
+
+Platforms define how they use those integers, and usually #define symbols
+for the GPIO lines so that board-specific setup code directly corresponds
+to the relevant schematics. In contrast, drivers should only use GPIO
+numbers passed to them from that setup code, using platform_data to hold
+board-specific pin configuration data (along with other board specific
+data they need). That avoids portability problems.
+
+So for example one platform uses numbers 32-159 for GPIOs; while another
+uses numbers 0..63 with one set of GPIO controllers, 64-79 with another
+type of GPIO controller, and on one particular board 80-95 with an FPGA.
+The numbers need not be contiguous; either of those platforms could also
+use numbers 2000-2063 to identify GPIOs in a bank of I2C GPIO expanders.
+
+If you want to initialize a structure with an invalid GPIO number, use
+some negative number (perhaps "-EINVAL"); that will never be valid. To
+test if such number from such a structure could reference a GPIO, you
+may use this predicate:
+
+ int gpio_is_valid(int number);
+
+A number that's not valid will be rejected by calls which may request
+or free GPIOs (see below). Other numbers may also be rejected; for
+example, a number might be valid but temporarily unused on a given board.
+
+Whether a platform supports multiple GPIO controllers is a platform-specific
+implementation issue, as are whether that support can leave "holes" in the space
+of GPIO numbers, and whether new controllers can be added at runtime. Such issues
+can affect things including whether adjacent GPIO numbers are both valid.
+
+Using GPIOs
+-----------
+The first thing a system should do with a GPIO is allocate it, using
+the gpio_request() call; see later.
+
+One of the next things to do with a GPIO, often in board setup code when
+setting up a platform_device using the GPIO, is mark its direction:
+
+ /* set as input or output, returning 0 or negative errno */
+ int gpio_direction_input(unsigned gpio);
+ int gpio_direction_output(unsigned gpio, int value);
+
+The return value is zero for success, else a negative errno. It should
+be checked, since the get/set calls don't have error returns and since
+misconfiguration is possible. You should normally issue these calls from
+a task context. However, for spinlock-safe GPIOs it's OK to use them
+before tasking is enabled, as part of early board setup.
+
+For output GPIOs, the value provided becomes the initial output value.
+This helps avoid signal glitching during system startup.
+
+For compatibility with legacy interfaces to GPIOs, setting the direction
+of a GPIO implicitly requests that GPIO (see below) if it has not been
+requested already. That compatibility is being removed from the optional
+gpiolib framework.
+
+Setting the direction can fail if the GPIO number is invalid, or when
+that particular GPIO can't be used in that mode. It's generally a bad
+idea to rely on boot firmware to have set the direction correctly, since
+it probably wasn't validated to do more than boot Linux. (Similarly,
+that board setup code probably needs to multiplex that pin as a GPIO,
+and configure pullups/pulldowns appropriately.)
+
+
+Spinlock-Safe GPIO access
+-------------------------
+Most GPIO controllers can be accessed with memory read/write instructions.
+Those don't need to sleep, and can safely be done from inside hard
+(nonthreaded) IRQ handlers and similar contexts.
+
+Use the following calls to access such GPIOs,
+for which gpio_cansleep() will always return false (see below):
+
+ /* GPIO INPUT: return zero or nonzero */
+ int gpio_get_value(unsigned gpio);
+
+ /* GPIO OUTPUT */
+ void gpio_set_value(unsigned gpio, int value);
+
+The values are boolean, zero for low, nonzero for high. When reading the
+value of an output pin, the value returned should be what's seen on the
+pin ... that won't always match the specified output value, because of
+issues including open-drain signaling and output latencies.
+
+The get/set calls have no error returns because "invalid GPIO" should have
+been reported earlier from gpio_direction_*(). However, note that not all
+platforms can read the value of output pins; those that can't should always
+return zero. Also, using these calls for GPIOs that can't safely be accessed
+without sleeping (see below) is an error.
+
+Platform-specific implementations are encouraged to optimize the two
+calls to access the GPIO value in cases where the GPIO number (and for
+output, value) are constant. It's normal for them to need only a couple
+of instructions in such cases (reading or writing a hardware register),
+and not to need spinlocks. Such optimized calls can make bitbanging
+applications a lot more efficient (in both space and time) than spending
+dozens of instructions on subroutine calls.
+
+
+GPIO access that may sleep
+--------------------------
+Some GPIO controllers must be accessed using message based busses like I2C
+or SPI. Commands to read or write those GPIO values require waiting to
+get to the head of a queue to transmit a command and get its response.
+This requires sleeping, which can't be done from inside IRQ handlers.
+
+Platforms that support this type of GPIO distinguish them from other GPIOs
+by returning nonzero from this call (which requires a valid GPIO number,
+which should have been previously allocated with gpio_request):
+
+ int gpio_cansleep(unsigned gpio);
+
+To access such GPIOs, a different set of accessors is defined:
+
+ /* GPIO INPUT: return zero or nonzero, might sleep */
+ int gpio_get_value_cansleep(unsigned gpio);
+
+ /* GPIO OUTPUT, might sleep */
+ void gpio_set_value_cansleep(unsigned gpio, int value);
+
+
+Accessing such GPIOs requires a context which may sleep, for example
+a threaded IRQ handler, and those accessors must be used instead of
+spinlock-safe accessors without the cansleep() name suffix.
+
+Other than the fact that these accessors might sleep, and will work
+on GPIOs that can't be accessed from hardIRQ handlers, these calls act
+the same as the spinlock-safe calls.
+
+ ** IN ADDITION ** calls to setup and configure such GPIOs must be made
+from contexts which may sleep, since they may need to access the GPIO
+controller chip too: (These setup calls are usually made from board
+setup or driver probe/teardown code, so this is an easy constraint.)
+
+ gpio_direction_input()
+ gpio_direction_output()
+ gpio_request()
+
+## gpio_request_one()
+## gpio_request_array()
+## gpio_free_array()
+
+ gpio_free()
+ gpio_set_debounce()
+
+
+
+Claiming and Releasing GPIOs
+----------------------------
+To help catch system configuration errors, two calls are defined.
+
+ /* request GPIO, returning 0 or negative errno.
+ * non-null labels may be useful for diagnostics.
+ */
+ int gpio_request(unsigned gpio, const char *label);
+
+ /* release previously-claimed GPIO */
+ void gpio_free(unsigned gpio);
+
+Passing invalid GPIO numbers to gpio_request() will fail, as will requesting
+GPIOs that have already been claimed with that call. The return value of
+gpio_request() must be checked. You should normally issue these calls from
+a task context. However, for spinlock-safe GPIOs it's OK to request GPIOs
+before tasking is enabled, as part of early board setup.
+
+These calls serve two basic purposes. One is marking the signals which
+are actually in use as GPIOs, for better diagnostics; systems may have
+several hundred potential GPIOs, but often only a dozen are used on any
+given board. Another is to catch conflicts, identifying errors when
+(a) two or more drivers wrongly think they have exclusive use of that
+signal, or (b) something wrongly believes it's safe to remove drivers
+needed to manage a signal that's in active use. That is, requesting a
+GPIO can serve as a kind of lock.
+
+Some platforms may also use knowledge about what GPIOs are active for
+power management, such as by powering down unused chip sectors and, more
+easily, gating off unused clocks.
+
+For GPIOs that use pins known to the pinctrl subsystem, that subsystem should
+be informed of their use; a gpiolib driver's .request() operation may call
+pinctrl_request_gpio(), and a gpiolib driver's .free() operation may call
+pinctrl_free_gpio(). The pinctrl subsystem allows a pinctrl_request_gpio()
+to succeed concurrently with a pin or pingroup being "owned" by a device for
+pin multiplexing.
+
+Any programming of pin multiplexing hardware that is needed to route the
+GPIO signal to the appropriate pin should occur within a GPIO driver's
+.direction_input() or .direction_output() operations, and occur after any
+setup of an output GPIO's value. This allows a glitch-free migration from a
+pin's special function to GPIO. This is sometimes required when using a GPIO
+to implement a workaround on signals typically driven by a non-GPIO HW block.
+
+Some platforms allow some or all GPIO signals to be routed to different pins.
+Similarly, other aspects of the GPIO or pin may need to be configured, such as
+pullup/pulldown. Platform software should arrange that any such details are
+configured prior to gpio_request() being called for those GPIOs, e.g. using
+the pinctrl subsystem's mapping table, so that GPIO users need not be aware
+of these details.
+
+Also note that it's your responsibility to have stopped using a GPIO
+before you free it.
+
+Considering in most cases GPIOs are actually configured right after they
+are claimed, three additional calls are defined:
+
+ /* request a single GPIO, with initial configuration specified by
+ * 'flags', identical to gpio_request() wrt other arguments and
+ * return value
+ */
+ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
+
+ /* request multiple GPIOs in a single call
+ */
+ int gpio_request_array(struct gpio *array, size_t num);
+
+ /* release multiple GPIOs in a single call
+ */
+ void gpio_free_array(struct gpio *array, size_t num);
+
+where 'flags' is currently defined to specify the following properties:
+
+ * GPIOF_DIR_IN - to configure direction as input
+ * GPIOF_DIR_OUT - to configure direction as output
+
+ * GPIOF_INIT_LOW - as output, set initial level to LOW
+ * GPIOF_INIT_HIGH - as output, set initial level to HIGH
+ * GPIOF_OPEN_DRAIN - gpio pin is open drain type.
+ * GPIOF_OPEN_SOURCE - gpio pin is open source type.
+
+ * GPIOF_EXPORT_DIR_FIXED - export gpio to sysfs, keep direction
+ * GPIOF_EXPORT_DIR_CHANGEABLE - also export, allow changing direction
+
+since GPIOF_INIT_* are only valid when configured as output, so group valid
+combinations as:
+
+ * GPIOF_IN - configure as input
+ * GPIOF_OUT_INIT_LOW - configured as output, initial level LOW
+ * GPIOF_OUT_INIT_HIGH - configured as output, initial level HIGH
+
+When setting the flag as GPIOF_OPEN_DRAIN then it will assume that pins is
+open drain type. Such pins will not be driven to 1 in output mode. It is
+require to connect pull-up on such pins. By enabling this flag, gpio lib will
+make the direction to input when it is asked to set value of 1 in output mode
+to make the pin HIGH. The pin is make to LOW by driving value 0 in output mode.
+
+When setting the flag as GPIOF_OPEN_SOURCE then it will assume that pins is
+open source type. Such pins will not be driven to 0 in output mode. It is
+require to connect pull-down on such pin. By enabling this flag, gpio lib will
+make the direction to input when it is asked to set value of 0 in output mode
+to make the pin LOW. The pin is make to HIGH by driving value 1 in output mode.
+
+In the future, these flags can be extended to support more properties.
+
+Further more, to ease the claim/release of multiple GPIOs, 'struct gpio' is
+introduced to encapsulate all three fields as:
+
+ struct gpio {
+ unsigned gpio;
+ unsigned long flags;
+ const char *label;
+ };
+
+A typical example of usage:
+
+ static struct gpio leds_gpios[] = {
+ { 32, GPIOF_OUT_INIT_HIGH, "Power LED" }, /* default to ON */
+ { 33, GPIOF_OUT_INIT_LOW, "Green LED" }, /* default to OFF */
+ { 34, GPIOF_OUT_INIT_LOW, "Red LED" }, /* default to OFF */
+ { 35, GPIOF_OUT_INIT_LOW, "Blue LED" }, /* default to OFF */
+ { ... },
+ };
+
+ err = gpio_request_one(31, GPIOF_IN, "Reset Button");
+ if (err)
+ ...
+
+ err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios));
+ if (err)
+ ...
+
+ gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios));
+
+
+GPIOs mapped to IRQs
+--------------------
+GPIO numbers are unsigned integers; so are IRQ numbers. These make up
+two logically distinct namespaces (GPIO 0 need not use IRQ 0). You can
+map between them using calls like:
+
+ /* map GPIO numbers to IRQ numbers */
+ int gpio_to_irq(unsigned gpio);
+
+ /* map IRQ numbers to GPIO numbers (avoid using this) */
+ int irq_to_gpio(unsigned irq);
+
+Those return either the corresponding number in the other namespace, or
+else a negative errno code if the mapping can't be done. (For example,
+some GPIOs can't be used as IRQs.) It is an unchecked error to use a GPIO
+number that wasn't set up as an input using gpio_direction_input(), or
+to use an IRQ number that didn't originally come from gpio_to_irq().
+
+These two mapping calls are expected to cost on the order of a single
+addition or subtraction. They're not allowed to sleep.
+
+Non-error values returned from gpio_to_irq() can be passed to request_irq()
+or free_irq(). They will often be stored into IRQ resources for platform
+devices, by the board-specific initialization code. Note that IRQ trigger
+options are part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are
+system wakeup capabilities.
+
+Non-error values returned from irq_to_gpio() would most commonly be used
+with gpio_get_value(), for example to initialize or update driver state
+when the IRQ is edge-triggered. Note that some platforms don't support
+this reverse mapping, so you should avoid using it.
+
+
+Emulating Open Drain Signals
+----------------------------
+Sometimes shared signals need to use "open drain" signaling, where only the
+low signal level is actually driven. (That term applies to CMOS transistors;
+"open collector" is used for TTL.) A pullup resistor causes the high signal
+level. This is sometimes called a "wire-AND"; or more practically, from the
+negative logic (low=true) perspective this is a "wire-OR".
+
+One common example of an open drain signal is a shared active-low IRQ line.
+Also, bidirectional data bus signals sometimes use open drain signals.
+
+Some GPIO controllers directly support open drain outputs; many don't. When
+you need open drain signaling but your hardware doesn't directly support it,
+there's a common idiom you can use to emulate it with any GPIO pin that can
+be used as either an input or an output:
+
+ LOW: gpio_direction_output(gpio, 0) ... this drives the signal
+ and overrides the pullup.
+
+ HIGH: gpio_direction_input(gpio) ... this turns off the output,
+ so the pullup (or some other device) controls the signal.
+
+If you are "driving" the signal high but gpio_get_value(gpio) reports a low
+value (after the appropriate rise time passes), you know some other component
+is driving the shared signal low. That's not necessarily an error. As one
+common example, that's how I2C clocks are stretched: a slave that needs a
+slower clock delays the rising edge of SCK, and the I2C master adjusts its
+signaling rate accordingly.
+
+
+GPIO controllers and the pinctrl subsystem
+------------------------------------------
+
+A GPIO controller on a SOC might be tightly coupled with the pinctrl
+subsystem, in the sense that the pins can be used by other functions
+together with an optional gpio feature. We have already covered the
+case where e.g. a GPIO controller need to reserve a pin or set the
+direction of a pin by calling any of:
+
+pinctrl_request_gpio()
+pinctrl_free_gpio()
+pinctrl_gpio_direction_input()
+pinctrl_gpio_direction_output()
+
+But how does the pin control subsystem cross-correlate the GPIO
+numbers (which are a global business) to a certain pin on a certain
+pin controller?
+
+This is done by registering "ranges" of pins, which are essentially
+cross-reference tables. These are described in
+Documentation/pinctrl.txt
+
+While the pin allocation is totally managed by the pinctrl subsystem,
+gpio (under gpiolib) is still maintained by gpio drivers. It may happen
+that different pin ranges in a SoC is managed by different gpio drivers.
+
+This makes it logical to let gpio drivers announce their pin ranges to
+the pin ctrl subsystem before it will call 'pinctrl_request_gpio' in order
+to request the corresponding pin to be prepared by the pinctrl subsystem
+before any gpio usage.
+
+For this, the gpio controller can register its pin range with pinctrl
+subsystem. There are two ways of doing it currently: with or without DT.
+
+For with DT support refer to Documentation/devicetree/bindings/gpio/gpio.txt.
+
+For non-DT support, user can call gpiochip_add_pin_range() with appropriate
+parameters to register a range of gpio pins with a pinctrl driver. For this
+exact name string of pinctrl device has to be passed as one of the
+argument to this routine.
+
+
+What do these conventions omit?
+===============================
+One of the biggest things these conventions omit is pin multiplexing, since
+this is highly chip-specific and nonportable. One platform might not need
+explicit multiplexing; another might have just two options for use of any
+given pin; another might have eight options per pin; another might be able
+to route a given GPIO to any one of several pins. (Yes, those examples all
+come from systems that run Linux today.)
+
+Related to multiplexing is configuration and enabling of the pullups or
+pulldowns integrated on some platforms. Not all platforms support them,
+or support them in the same way; and any given board might use external
+pullups (or pulldowns) so that the on-chip ones should not be used.
+(When a circuit needs 5 kOhm, on-chip 100 kOhm resistors won't do.)
+Likewise drive strength (2 mA vs 20 mA) and voltage (1.8V vs 3.3V) is a
+platform-specific issue, as are models like (not) having a one-to-one
+correspondence between configurable pins and GPIOs.
+
+There are other system-specific mechanisms that are not specified here,
+like the aforementioned options for input de-glitching and wire-OR output.
+Hardware may support reading or writing GPIOs in gangs, but that's usually
+configuration dependent: for GPIOs sharing the same bank. (GPIOs are
+commonly grouped in banks of 16 or 32, with a given SOC having several such
+banks.) Some systems can trigger IRQs from output GPIOs, or read values
+from pins not managed as GPIOs. Code relying on such mechanisms will
+necessarily be nonportable.
+
+Dynamic definition of GPIOs is not currently standard; for example, as
+a side effect of configuring an add-on board with some GPIO expanders.
+
+
+GPIO implementor's framework (OPTIONAL)
+=======================================
+As noted earlier, there is an optional implementation framework making it
+easier for platforms to support different kinds of GPIO controller using
+the same programming interface. This framework is called "gpiolib".
+
+As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file
+will be found there. That will list all the controllers registered through
+this framework, and the state of the GPIOs currently in use.
+
+
+Controller Drivers: gpio_chip
+-----------------------------
+In this framework each GPIO controller is packaged as a "struct gpio_chip"
+with information common to each controller of that type:
+
+ - methods to establish GPIO direction
+ - methods used to access GPIO values
+ - flag saying whether calls to its methods may sleep
+ - optional debugfs dump method (showing extra state like pullup config)
+ - label for diagnostics
+
+There is also per-instance data, which may come from device.platform_data:
+the number of its first GPIO, and how many GPIOs it exposes.
+
+The code implementing a gpio_chip should support multiple instances of the
+controller, possibly using the driver model. That code will configure each
+gpio_chip and issue gpiochip_add(). Removing a GPIO controller should be
+rare; use gpiochip_remove() when it is unavoidable.
+
+Most often a gpio_chip is part of an instance-specific structure with state
+not exposed by the GPIO interfaces, such as addressing, power management,
+and more. Chips such as codecs will have complex non-GPIO state.
+
+Any debugfs dump method should normally ignore signals which haven't been
+requested as GPIOs. They can use gpiochip_is_requested(), which returns
+either NULL or the label associated with that GPIO when it was requested.
+
+
+Platform Support
+----------------
+To support this framework, a platform's Kconfig will "select" either
+ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
+and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
+three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
+
+It may also provide a custom value for ARCH_NR_GPIOS, so that it better
+reflects the number of GPIOs in actual use on that platform, without
+wasting static table space. (It should count both built-in/SoC GPIOs and
+also ones on GPIO expanders.
+
+ARCH_REQUIRE_GPIOLIB means that the gpiolib code will always get compiled
+into the kernel on that architecture.
+
+ARCH_WANT_OPTIONAL_GPIOLIB means the gpiolib code defaults to off and the user
+can enable it and build it into the kernel optionally.
+
+If neither of these options are selected, the platform does not support
+GPIOs through GPIO-lib and the code cannot be enabled by the user.
+
+Trivial implementations of those functions can directly use framework
+code, which always dispatches through the gpio_chip:
+
+ #define gpio_get_value __gpio_get_value
+ #define gpio_set_value __gpio_set_value
+ #define gpio_cansleep __gpio_cansleep
+
+Fancier implementations could instead define those as inline functions with
+logic optimizing access to specific SOC-based GPIOs. For example, if the
+referenced GPIO is the constant "12", getting or setting its value could
+cost as little as two or three instructions, never sleeping. When such an
+optimization is not possible those calls must delegate to the framework
+code, costing at least a few dozen instructions. For bitbanged I/O, such
+instruction savings can be significant.
+
+For SOCs, platform-specific code defines and registers gpio_chip instances
+for each bank of on-chip GPIOs. Those GPIOs should be numbered/labeled to
+match chip vendor documentation, and directly match board schematics. They
+may well start at zero and go up to a platform-specific limit. Such GPIOs
+are normally integrated into platform initialization to make them always be
+available, from arch_initcall() or earlier; they can often serve as IRQs.
+
+
+Board Support
+-------------
+For external GPIO controllers -- such as I2C or SPI expanders, ASICs, multi
+function devices, FPGAs or CPLDs -- most often board-specific code handles
+registering controller devices and ensures that their drivers know what GPIO
+numbers to use with gpiochip_add(). Their numbers often start right after
+platform-specific GPIOs.
+
+For example, board setup code could create structures identifying the range
+of GPIOs that chip will expose, and passes them to each GPIO expander chip
+using platform_data. Then the chip driver's probe() routine could pass that
+data to gpiochip_add().
+
+Initialization order can be important. For example, when a device relies on
+an I2C-based GPIO, its probe() routine should only be called after that GPIO
+becomes available. That may mean the device should not be registered until
+calls for that GPIO can work. One way to address such dependencies is for
+such gpio_chip controllers to provide setup() and teardown() callbacks to
+board specific code; those board specific callbacks would register devices
+once all the necessary resources are available, and remove them later when
+the GPIO controller device becomes unavailable.
+
+
+Sysfs Interface for Userspace (OPTIONAL)
+========================================
+Platforms which use the "gpiolib" implementors framework may choose to
+configure a sysfs user interface to GPIOs. This is different from the
+debugfs interface, since it provides control over GPIO direction and
+value instead of just showing a gpio state summary. Plus, it could be
+present on production systems without debugging support.
+
+Given appropriate hardware documentation for the system, userspace could
+know for example that GPIO #23 controls the write protect line used to
+protect boot loader segments in flash memory. System upgrade procedures
+may need to temporarily remove that protection, first importing a GPIO,
+then changing its output state, then updating the code before re-enabling
+the write protection. In normal use, GPIO #23 would never be touched,
+and the kernel would have no need to know about it.
+
+Again depending on appropriate hardware documentation, on some systems
+userspace GPIO can be used to determine system configuration data that
+standard kernels won't know about. And for some tasks, simple userspace
+GPIO drivers could be all that the system really needs.
+
+Note that standard kernel drivers exist for common "LEDs and Buttons"
+GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those
+instead of talking directly to the GPIOs; they integrate with kernel
+frameworks better than your userspace code could.
+
+
+Paths in Sysfs
+--------------
+There are three kinds of entry in /sys/class/gpio:
+
+ - Control interfaces used to get userspace control over GPIOs;
+
+ - GPIOs themselves; and
+
+ - GPIO controllers ("gpio_chip" instances).
+
+That's in addition to standard files including the "device" symlink.
+
+The control interfaces are write-only:
+
+ /sys/class/gpio/
+
+ "export" ... Userspace may ask the kernel to export control of
+ a GPIO to userspace by writing its number to this file.
+
+ Example: "echo 19 > export" will create a "gpio19" node
+ for GPIO #19, if that's not requested by kernel code.
+
+ "unexport" ... Reverses the effect of exporting to userspace.
+
+ Example: "echo 19 > unexport" will remove a "gpio19"
+ node exported using the "export" file.
+
+GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
+and have the following read/write attributes:
+
+ /sys/class/gpio/gpioN/
+
+ "direction" ... reads as either "in" or "out". This value may
+ normally be written. Writing as "out" defaults to
+ initializing the value as low. To ensure glitch free
+ operation, values "low" and "high" may be written to
+ configure the GPIO as an output with that initial value.
+
+ Note that this attribute *will not exist* if the kernel
+ doesn't support changing the direction of a GPIO, or
+ it was exported by kernel code that didn't explicitly
+ allow userspace to reconfigure this GPIO's direction.
+
+ "value" ... reads as either 0 (low) or 1 (high). If the GPIO
+ is configured as an output, this value may be written;
+ any nonzero value is treated as high.
+
+ If the pin can be configured as interrupt-generating interrupt
+ and if it has been configured to generate interrupts (see the
+ description of "edge"), you can poll(2) on that file and
+ poll(2) will return whenever the interrupt was triggered. If
+ you use poll(2), set the events POLLPRI and POLLERR. If you
+ use select(2), set the file descriptor in exceptfds. After
+ poll(2) returns, either lseek(2) to the beginning of the sysfs
+ file and read the new value or close the file and re-open it
+ to read the value.
+
+ "edge" ... reads as either "none", "rising", "falling", or
+ "both". Write these strings to select the signal edge(s)
+ that will make poll(2) on the "value" file return.
+
+ This file exists only if the pin can be configured as an
+ interrupt generating input pin.
+
+ "active_low" ... reads as either 0 (false) or 1 (true). Write
+ any nonzero value to invert the value attribute both
+ for reading and writing. Existing and subsequent
+ poll(2) support configuration via the edge attribute
+ for "rising" and "falling" edges will follow this
+ setting.
+
+GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
+controller implementing GPIOs starting at #42) and have the following
+read-only attributes:
+
+ /sys/class/gpio/gpiochipN/
+
+ "base" ... same as N, the first GPIO managed by this chip
+
+ "label" ... provided for diagnostics (not always unique)
+
+ "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
+
+Board documentation should in most cases cover what GPIOs are used for
+what purposes. However, those numbers are not always stable; GPIOs on
+a daughtercard might be different depending on the base board being used,
+or other cards in the stack. In such cases, you may need to use the
+gpiochip nodes (possibly in conjunction with schematics) to determine
+the correct GPIO number to use for a given signal.
+
+
+Exporting from Kernel code
+--------------------------
+Kernel code can explicitly manage exports of GPIOs which have already been
+requested using gpio_request():
+
+ /* export the GPIO to userspace */
+ int gpio_export(unsigned gpio, bool direction_may_change);
+
+ /* reverse gpio_export() */
+ void gpio_unexport();
+
+ /* create a sysfs link to an exported GPIO node */
+ int gpio_export_link(struct device *dev, const char *name,
+ unsigned gpio)
+
+ /* change the polarity of a GPIO node in sysfs */
+ int gpio_sysfs_set_active_low(unsigned gpio, int value);
+
+After a kernel driver requests a GPIO, it may only be made available in
+the sysfs interface by gpio_export(). The driver can control whether the
+signal direction may change. This helps drivers prevent userspace code
+from accidentally clobbering important system state.
+
+This explicit exporting can help with debugging (by making some kinds
+of experiments easier), or can provide an always-there interface that's
+suitable for documenting as part of a board support package.
+
+After the GPIO has been exported, gpio_export_link() allows creating
+symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
+use this to provide the interface under their own device in sysfs with
+a descriptive name.
+
+Drivers can use gpio_sysfs_set_active_low() to hide GPIO line polarity
+differences between boards from user space. This only affects the
+sysfs interface. Polarity change can be done both before and after
+gpio_export(), and previously enabled poll(2) support for either
+rising or falling edge will be reconfigured to follow this setting.
--- /dev/null
+GPIO Interfaces
+===============
+
+The documents in this directory give detailed instructions on how to access
+GPIOs in drivers, and how to write a driver for a device that provides GPIOs
+itself.
+
+Due to the history of GPIO interfaces in the kernel, there are two different
+ways to obtain and use GPIOs:
+
+ - The descriptor-based interface is the preferred way to manipulate GPIOs,
+and is described by all the files in this directory excepted gpio-legacy.txt.
+ - The legacy integer-based interface which is considered deprecated (but still
+usable for compatibility reasons) is documented in gpio-legacy.txt.
+
+The remainder of this document applies to the new descriptor-based interface.
+gpio-legacy.txt contains the same information applied to the legacy
+integer-based interface.
+
+
+What is a GPIO?
+===============
+
+A "General Purpose Input/Output" (GPIO) is a flexible software-controlled
+digital signal. They are provided from many kinds of chip, and are familiar
+to Linux developers working with embedded and custom hardware. Each GPIO
+represents a bit connected to a particular pin, or "ball" on Ball Grid Array
+(BGA) packages. Board schematics show which external hardware connects to
+which GPIOs. Drivers can be written generically, so that board setup code
+passes such pin configuration data to drivers.
+
+System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every
+non-dedicated pin can be configured as a GPIO; and most chips have at least
+several dozen of them. Programmable logic devices (like FPGAs) can easily
+provide GPIOs; multifunction chips like power managers, and audio codecs
+often have a few such pins to help with pin scarcity on SOCs; and there are
+also "GPIO Expander" chips that connect using the I2C or SPI serial buses.
+Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS
+firmware knowing how they're used).
+
+The exact capabilities of GPIOs vary between systems. Common options:
+
+ - Output values are writable (high=1, low=0). Some chips also have
+ options about how that value is driven, so that for example only one
+ value might be driven, supporting "wire-OR" and similar schemes for the
+ other value (notably, "open drain" signaling).
+
+ - Input values are likewise readable (1, 0). Some chips support readback
+ of pins configured as "output", which is very useful in such "wire-OR"
+ cases (to support bidirectional signaling). GPIO controllers may have
+ input de-glitch/debounce logic, sometimes with software controls.
+
+ - Inputs can often be used as IRQ signals, often edge triggered but
+ sometimes level triggered. Such IRQs may be configurable as system
+ wakeup events, to wake the system from a low power state.
+
+ - Usually a GPIO will be configurable as either input or output, as needed
+ by different product boards; single direction ones exist too.
+
+ - Most GPIOs can be accessed while holding spinlocks, but those accessed
+ through a serial bus normally can't. Some systems support both types.
+
+On a given board each GPIO is used for one specific purpose like monitoring
+MMC/SD card insertion/removal, detecting card write-protect status, driving
+a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware
+watchdog, sensing a switch, and so on.
+
+
+Common GPIO Properties
+======================
+
+These properties are met through all the other documents of the GPIO interface
+and it is useful to understand them, especially if you need to define GPIO
+mappings.
+
+Active-High and Active-Low
+--------------------------
+It is natural to assume that a GPIO is "active" when its output signal is 1
+("high"), and inactive when it is 0 ("low"). However in practice the signal of a
+GPIO may be inverted before is reaches its destination, or a device could decide
+to have different conventions about what "active" means. Such decisions should
+be transparent to device drivers, therefore it is possible to define a GPIO as
+being either active-high ("1" means "active", the default) or active-low ("0"
+means "active") so that drivers only need to worry about the logical signal and
+not about what happens at the line level.
+
+Open Drain and Open Source
+--------------------------
+Sometimes shared signals need to use "open drain" (where only the low signal
+level is actually driven), or "open source" (where only the high signal level is
+driven) signaling. That term applies to CMOS transistors; "open collector" is
+used for TTL. A pullup or pulldown resistor causes the high or low signal level.
+This is sometimes called a "wire-AND"; or more practically, from the negative
+logic (low=true) perspective this is a "wire-OR".
+
+One common example of an open drain signal is a shared active-low IRQ line.
+Also, bidirectional data bus signals sometimes use open drain signals.
+
+Some GPIO controllers directly support open drain and open source outputs; many
+don't. When you need open drain signaling but your hardware doesn't directly
+support it, there's a common idiom you can use to emulate it with any GPIO pin
+that can be used as either an input or an output:
+
+ LOW: gpiod_direction_output(gpio, 0) ... this drives the signal and overrides
+ the pullup.
+
+ HIGH: gpiod_direction_input(gpio) ... this turns off the output, so the pullup
+ (or some other device) controls the signal.
+
+The same logic can be applied to emulate open source signaling, by driving the
+high signal and configuring the GPIO as input for low. This open drain/open
+source emulation can be handled transparently by the GPIO framework.
+
+If you are "driving" the signal high but gpiod_get_value(gpio) reports a low
+value (after the appropriate rise time passes), you know some other component is
+driving the shared signal low. That's not necessarily an error. As one common
+example, that's how I2C clocks are stretched: a slave that needs a slower clock
+delays the rising edge of SCK, and the I2C master adjusts its signaling rate
+accordingly.
--- /dev/null
+GPIO Sysfs Interface for Userspace
+==================================
+
+Platforms which use the "gpiolib" implementors framework may choose to
+configure a sysfs user interface to GPIOs. This is different from the
+debugfs interface, since it provides control over GPIO direction and
+value instead of just showing a gpio state summary. Plus, it could be
+present on production systems without debugging support.
+
+Given appropriate hardware documentation for the system, userspace could
+know for example that GPIO #23 controls the write protect line used to
+protect boot loader segments in flash memory. System upgrade procedures
+may need to temporarily remove that protection, first importing a GPIO,
+then changing its output state, then updating the code before re-enabling
+the write protection. In normal use, GPIO #23 would never be touched,
+and the kernel would have no need to know about it.
+
+Again depending on appropriate hardware documentation, on some systems
+userspace GPIO can be used to determine system configuration data that
+standard kernels won't know about. And for some tasks, simple userspace
+GPIO drivers could be all that the system really needs.
+
+Note that standard kernel drivers exist for common "LEDs and Buttons"
+GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those
+instead of talking directly to the GPIOs; they integrate with kernel
+frameworks better than your userspace code could.
+
+
+Paths in Sysfs
+--------------
+There are three kinds of entry in /sys/class/gpio:
+
+ - Control interfaces used to get userspace control over GPIOs;
+
+ - GPIOs themselves; and
+
+ - GPIO controllers ("gpio_chip" instances).
+
+That's in addition to standard files including the "device" symlink.
+
+The control interfaces are write-only:
+
+ /sys/class/gpio/
+
+ "export" ... Userspace may ask the kernel to export control of
+ a GPIO to userspace by writing its number to this file.
+
+ Example: "echo 19 > export" will create a "gpio19" node
+ for GPIO #19, if that's not requested by kernel code.
+
+ "unexport" ... Reverses the effect of exporting to userspace.
+
+ Example: "echo 19 > unexport" will remove a "gpio19"
+ node exported using the "export" file.
+
+GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
+and have the following read/write attributes:
+
+ /sys/class/gpio/gpioN/
+
+ "direction" ... reads as either "in" or "out". This value may
+ normally be written. Writing as "out" defaults to
+ initializing the value as low. To ensure glitch free
+ operation, values "low" and "high" may be written to
+ configure the GPIO as an output with that initial value.
+
+ Note that this attribute *will not exist* if the kernel
+ doesn't support changing the direction of a GPIO, or
+ it was exported by kernel code that didn't explicitly
+ allow userspace to reconfigure this GPIO's direction.
+
+ "value" ... reads as either 0 (low) or 1 (high). If the GPIO
+ is configured as an output, this value may be written;
+ any nonzero value is treated as high.
+
+ If the pin can be configured as interrupt-generating interrupt
+ and if it has been configured to generate interrupts (see the
+ description of "edge"), you can poll(2) on that file and
+ poll(2) will return whenever the interrupt was triggered. If
+ you use poll(2), set the events POLLPRI and POLLERR. If you
+ use select(2), set the file descriptor in exceptfds. After
+ poll(2) returns, either lseek(2) to the beginning of the sysfs
+ file and read the new value or close the file and re-open it
+ to read the value.
+
+ "edge" ... reads as either "none", "rising", "falling", or
+ "both". Write these strings to select the signal edge(s)
+ that will make poll(2) on the "value" file return.
+
+ This file exists only if the pin can be configured as an
+ interrupt generating input pin.
+
+ "active_low" ... reads as either 0 (false) or 1 (true). Write
+ any nonzero value to invert the value attribute both
+ for reading and writing. Existing and subsequent
+ poll(2) support configuration via the edge attribute
+ for "rising" and "falling" edges will follow this
+ setting.
+
+GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
+controller implementing GPIOs starting at #42) and have the following
+read-only attributes:
+
+ /sys/class/gpio/gpiochipN/
+
+ "base" ... same as N, the first GPIO managed by this chip
+
+ "label" ... provided for diagnostics (not always unique)
+
+ "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
+
+Board documentation should in most cases cover what GPIOs are used for
+what purposes. However, those numbers are not always stable; GPIOs on
+a daughtercard might be different depending on the base board being used,
+or other cards in the stack. In such cases, you may need to use the
+gpiochip nodes (possibly in conjunction with schematics) to determine
+the correct GPIO number to use for a given signal.
+
+
+Exporting from Kernel code
+--------------------------
+Kernel code can explicitly manage exports of GPIOs which have already been
+requested using gpio_request():
+
+ /* export the GPIO to userspace */
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+
+ /* reverse gpio_export() */
+ void gpiod_unexport(struct gpio_desc *desc);
+
+ /* create a sysfs link to an exported GPIO node */
+ int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc);
+
+ /* change the polarity of a GPIO node in sysfs */
+ int gpiod_sysfs_set_active_low(struct gpio_desc *desc, int value);
+
+After a kernel driver requests a GPIO, it may only be made available in
+the sysfs interface by gpiod_export(). The driver can control whether the
+signal direction may change. This helps drivers prevent userspace code
+from accidentally clobbering important system state.
+
+This explicit exporting can help with debugging (by making some kinds
+of experiments easier), or can provide an always-there interface that's
+suitable for documenting as part of a board support package.
+
+After the GPIO has been exported, gpiod_export_link() allows creating
+symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
+use this to provide the interface under their own device in sysfs with
+a descriptive name.
+
+Drivers can use gpiod_sysfs_set_active_low() to hide GPIO line polarity
+differences between boards from user space. Polarity change can be done both
+before and after gpiod_export(), and previously enabled poll(2) support for
+either rising or falling edge will be reconfigured to follow this setting.
F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
-M: Chris Mason <chris.mason@fusionio.com>
+M: Chris Mason <clm@fb.com>
+M: Josef Bacik <jbacik@fb.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
S: Maintained
F: drivers/usb/chipidea/
+CHROME HARDWARE PLATFORM SUPPORT
+M: Olof Johansson <olof@lixom.net>
+S: Maintained
+F: drivers/platform/chrome/
+
CISCO VIC ETHERNET NIC DRIVER
M: Christian Benvenuti <benve@cisco.com>
M: Sujith Sankar <ssujith@cisco.com>
S: Maintained
F: drivers/net/usb/hso.c
+HSR NETWORK PROTOCOL
+M: Arvid Brodin <arvid.brodin@alten.se>
+L: netdev@vger.kernel.org
+S: Maintained
+F: net/hsr/
+
HTCPEN TOUCHSCREEN DRIVER
M: Pau Oliva Fora <pof@eslack.org>
L: linux-input@vger.kernel.org
F: Documentation/lockdep*.txt
F: Documentation/lockstat.txt
F: include/linux/lockdep.h
-F: kernel/lockdep*
+F: kernel/locking/
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
M: "Richard Russon (FlatCap)" <ldm@flatcap.org>
F: include/linux/platform_data/pn544.h
NFS, SUNRPC, AND LOCKD CLIENTS
-M: Trond Myklebust <Trond.Myklebust@netapp.com>
+M: Trond Myklebust <trond.myklebust@primarydata.com>
L: linux-nfs@vger.kernel.org
W: http://client.linux-nfs.org
-T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
+T: git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
S: Maintained
F: fs/lockd/
F: fs/nfs/
M: Rob Herring <rob.herring@calxeda.com>
M: Pawel Moll <pawel.moll@arm.com>
M: Mark Rutland <mark.rutland@arm.com>
-M: Stephen Warren <swarren@wwwdotorg.org>
M: Ian Campbell <ijc+devicetree@hellion.org.uk>
+M: Kumar Gala <galak@codeaurora.org>
L: devicetree@vger.kernel.org
S: Maintained
F: Documentation/devicetree/
F: kernel/sched/
F: include/linux/sched.h
F: include/uapi/linux/sched.h
-F: kernel/wait.c
F: include/linux/wait.h
SCORE ARCHITECTURE
VERSION = 3
PATCHLEVEL = 13
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = One Giant Leap for Frogkind
# *DOCUMENTATION*
/ {
model = "IGEP COM AM335x on AQUILA Expansion";
compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+
+ hdmi {
+ compatible = "ti,tilcdc,slave";
+ i2c = <&i2c0>;
+ pinctrl-names = "default", "off";
+ pinctrl-0 = <&nxp_hdmi_pins>;
+ pinctrl-1 = <&nxp_hdmi_off_pins>;
+ status = "okay";
+ };
+
+ leds_base {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_base_pins>;
+
+ compatible = "gpio-leds";
+
+ led@0 {
+ label = "base:red:user";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "base:green:user";
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */
+ 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */
+ 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */
+ 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */
+ 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */
+ 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */
+ 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */
+ 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */
+ 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */
+ 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */
+ 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */
+ 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */
+ 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */
+ 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */
+ 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */
+ 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */
+ 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */
+ 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */
+ >;
+ };
+ nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
+ pinctrl-single,pins = <
+ 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */
+ >;
+ };
+
+ leds_base_pins: pinmux_leds_base_pins {
+ pinctrl-single,pins = <
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */
+ >;
+ };
+};
+
+&lcdc {
+ status = "okay";
+};
+
+&i2c0 {
+ eeprom: eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+ };
};
pinctrl-0 = <&uart0_pins>;
};
+&usb {
+ status = "okay";
+
+ control@44e10000 {
+ status = "okay";
+ };
+
+ usb-phy@47401300 {
+ status = "okay";
+ };
+
+ usb-phy@47401b00 {
+ status = "okay";
+ };
+
+ usb@47401000 {
+ status = "okay";
+ };
+
+ usb@47401800 {
+ status = "okay";
+ dr_mode = "host";
+ };
+
+ dma-controller@07402000 {
+ status = "okay";
+ };
+};
+
#include "tps65910.dtsi"
&tps {
spi-max-frequency = <50000000>;
};
};
+ };
- pcie-controller {
+ pcie-controller {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * both standard PCIe slots and mini-PCIe
+ * slots on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
status = "okay";
- /*
- * The two PCIe units are accessible through
- * both standard PCIe slots and mini-PCIe
- * slots on the board.
- */
- pcie@1,0 {
- /* Port 0, Lane 0 */
- status = "okay";
- };
- pcie@2,0 {
- /* Port 1, Lane 0 */
- status = "okay";
- };
};
};
};
coherency-fabric@20200 {
compatible = "marvell,coherency-fabric";
- reg = <0x20200 0xb0>, <0x21810 0x1c>;
+ reg = <0x20200 0xb0>, <0x21010 0x1c>;
};
serial@12000 {
/*
* MV78230 has 2 PCIe units Gen2.0: One unit can be
* configured as x4 or quad x1 lanes. One unit is
- * x4/x1.
+ * x1 only.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
- 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
- 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
- 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
pcie@1,0 {
device_type = "pci";
status = "disabled";
};
- pcie@9,0 {
+ pcie@5,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
- reg = <0x4800 0 0 0 0>;
+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
- 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+ 0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 99>;
- marvell,pcie-port = <2>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
- clocks = <&gateclk 26>;
+ clocks = <&gateclk 9>;
status = "disabled";
};
};
/*
* MV78260 has 3 PCIe units Gen2.0: Two units can be
* configured as x4 or quad x1 lanes. One unit is
- * x4/x1.
+ * x4 only.
*/
pcie-controller {
compatible = "marvell,armada-xp-pcie";
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
- 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
+ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
+ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
+ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
- 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
- 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
- 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
- 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
+
+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
+ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
+ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
+ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
+
+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
pcie@1,0 {
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
- 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &mpic 59>;
marvell,pcie-port = <0>;
status = "disabled";
};
- pcie@9,0 {
+ pcie@5,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
- reg = <0x4800 0 0 0 0>;
+ assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+ reg = <0x2800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
- 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+ 0x81000000 0 0 0x81000000 0x5 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 99>;
- marvell,pcie-port = <2>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
- clocks = <&gateclk 26>;
+ clocks = <&gateclk 9>;
status = "disabled";
};
- pcie@10,0 {
+ pcie@6,0 {
device_type = "pci";
- assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
- reg = <0x5000 0 0 0 0>;
+ assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+ reg = <0x3000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
- ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
- 0x81000000 0 0 0x81000000 0xa 0 1 0>;
+ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+ 0x81000000 0 0 0x81000000 0x6 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &mpic 103>;
- marvell,pcie-port = <3>;
+ interrupt-map = <0 0 0 0 &mpic 63>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 10>;
+ status = "disabled";
+ };
+
+ pcie@7,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+ reg = <0x3800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+ 0x81000000 0 0 0x81000000 0x7 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 64>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 11>;
+ status = "disabled";
+ };
+
+ pcie@8,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+ reg = <0x4000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+ 0x81000000 0 0 0x81000000 0x8 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 65>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 12>;
+ status = "disabled";
+ };
+
+ pcie@9,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+ reg = <0x4800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
- clocks = <&gateclk 27>;
+ clocks = <&gateclk 26>;
status = "disabled";
};
};
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ aliases {
+ serial4 = &usart3;
+ };
+
ahb {
apb {
pinctrl@fffff400 {
reg = <0x7e205000 0x1000>;
interrupts = <2 21>;
clocks = <&clk_i2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
reg = <0x7e804000 0x1000>;
interrupts = <2 21>;
clocks = <&clk_i2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
i2c2_bus: i2c2-bus {
samsung,pin-pud = <0>;
};
+
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
i2c@12C60000 {
max77686@09 {
compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
+ wakeup-source;
reg = <0x09>;
voltage-regulators {
clocks = <&clks 197>, <&clks 3>,
<&clks 197>, <&clks 107>,
<&clks 0>, <&clks 118>,
- <&clks 62>, <&clks 139>,
+ <&clks 0>, <&clks 139>,
<&clks 0>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
- vmmc-supply = <&vddvario>;
- vmmc_aux-supply = <&vdd33a>;
+ vddvario-supply = <&vddvario>;
+ vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
smsc,save-mac-address;
};
* they probably share the same GPIO IRQ
* REVISIT: Add timing support from slls644g.pdf
*/
- 8250@3,0 {
+ uart@3,0 {
compatible = "ns16550a";
reg = <3 0 0x100>;
bank-width = <2>;
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/omap.h>
#include "skeleton.dtsi"
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
};
cpus {
ranges;
ti,hwmods = "l3_main";
+ aes: aes@480a6000 {
+ compatible = "ti,omap2-aes";
+ ti,hwmods = "aes";
+ reg = <0x480a6000 0x50>;
+ dmas = <&sdma 9 &sdma 10>;
+ dma-names = "tx", "rx";
+ };
+
+ hdq1w: 1w@480b2000 {
+ compatible = "ti,omap2420-1w";
+ ti,hwmods = "hdq1w";
+ reg = <0x480b2000 0x1000>;
+ interrupts = <58>;
+ };
+
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap2-mailbox";
+ ti,hwmods = "mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>;
+ };
+
intc: interrupt-controller@1 {
compatible = "ti,omap2-intc";
interrupt-controller;
sdma: dma-controller@48056000 {
compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
+ ti,hwmods = "dma";
reg = <0x48056000 0x1000>;
interrupts = <12>,
<13>,
#dma-requests = <64>;
};
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap2-i2c";
+ ti,hwmods = "i2c1";
+ reg = <0x48070000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <56>;
+ dmas = <&sdma 27 &sdma 28>;
+ dma-names = "tx", "rx";
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap2-i2c";
+ ti,hwmods = "i2c2";
+ reg = <0x48072000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <57>;
+ dmas = <&sdma 29 &sdma 30>;
+ dma-names = "tx", "rx";
+ };
+
+ mcspi1: mcspi@48098000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi1";
+ reg = <0x48098000 0x100>;
+ interrupts = <65>;
+ dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
+ &sdma 39 &sdma 40 &sdma 41 &sdma 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+
+ mcspi2: mcspi@4809a000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi2";
+ reg = <0x4809a000 0x100>;
+ interrupts = <66>;
+ dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ rng: rng@480a0000 {
+ compatible = "ti,omap2-rng";
+ ti,hwmods = "rng";
+ reg = <0x480a0000 0x50>;
+ interrupts = <36>;
+ };
+
+ sham: sham@480a4000 {
+ compatible = "ti,omap2-sham";
+ ti,hwmods = "sham";
+ reg = <0x480a4000 0x64>;
+ interrupts = <51>;
+ dmas = <&sdma 13>;
+ dma-names = "rx";
+ };
+
uart1: serial@4806a000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart1";
+ reg = <0x4806a000 0x2000>;
+ interrupts = <72>;
+ dmas = <&sdma 49 &sdma 50>;
+ dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart2";
+ reg = <0x4806c000 0x400>;
+ interrupts = <73>;
+ dmas = <&sdma 51 &sdma 52>;
+ dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
uart3: serial@4806e000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart3";
+ reg = <0x4806e000 0x400>;
+ interrupts = <74>;
+ dmas = <&sdma 53 &sdma 54>;
+ dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
dma-names = "tx", "rx";
};
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
timer1: timer@48028000 {
compatible = "ti,omap2420-timer";
reg = <0x48028000 0x400>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
+
+ wd_timer2: wdt@48022000 {
+ compatible = "ti,omap2-wdt";
+ ti,hwmods = "wd_timer2";
+ reg = <0x48022000 0x80>;
+ };
};
};
+
+&i2c1 {
+ compatible = "ti,omap2420-i2c";
+};
+
+&i2c2 {
+ compatible = "ti,omap2420-i2c";
+};
dma-names = "tx", "rx";
};
+ mmc1: mmc@4809c000 {
+ compatible = "ti,omap2-hsmmc";
+ reg = <0x4809c000 0x200>;
+ interrupts = <83>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ dmas = <&sdma 61>, <&sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
+ mmc2: mmc@480b4000 {
+ compatible = "ti,omap2-hsmmc";
+ reg = <0x480b4000 0x200>;
+ interrupts = <86>;
+ ti,hwmods = "mmc2";
+ dmas = <&sdma 47>, <&sdma 48>;
+ dma-names = "tx", "rx";
+ };
+
timer1: timer@49018000 {
compatible = "ti,omap2420-timer";
reg = <0x49018000 0x400>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
+
+ mcspi3: mcspi@480b8000 {
+ compatible = "ti,omap2-mcspi";
+ ti,hwmods = "mcspi3";
+ reg = <0x480b8000 0x100>;
+ interrupts = <91>;
+ dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ usb_otg_hs: usb_otg_hs@480ac000 {
+ compatible = "ti,omap2-musb";
+ ti,hwmods = "usb_otg_hs";
+ reg = <0x480ac000 0x1000>;
+ interrupts = <93>;
+ };
+
+ wd_timer2: wdt@49016000 {
+ compatible = "ti,omap2-wdt";
+ ti,hwmods = "wd_timer2";
+ reg = <0x49016000 0x80>;
+ };
};
};
+
+&i2c1 {
+ compatible = "ti,omap2430-i2c";
+};
+
+&i2c2 {
+ compatible = "ti,omap2430-i2c";
+};
&usbhsehci {
phys = <0 &hsusb2_phy>;
};
+
+&vaux2 {
+ regulator-name = "usb_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
vcc-supply = <&hsusb2_power>;
};
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3beagle";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
+
gpio_keys {
compatible = "gpio-keys";
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
};
};
mode = <3>;
power = <50>;
};
+
+&vaux2 {
+ regulator-name = "vdd_ehci";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
/*
- * Device Tree Source for IGEP Technology devices
+ * Common device tree for IGEP boards based on AM/DM37x
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
*/
/dts-v1/;
-#include "omap34xx.dtsi"
+#include "omap36xx.dtsi"
/ {
memory {
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
+
+ vdd33: regulator-vdd33 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd33";
+ regulator-always-on;
+ };
+
+ lbee1usjyc_vmmc: lbee1usjyc_vmmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lbee1usjyc_pins>;
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbee1usjyc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */
+ startup-delay-us = <10000>;
+ enable-active-high;
+ vin-supply = <&vdd33>;
+ };
};
&omap3_pmx_core {
>;
};
+ /* WiFi/BT combo */
+ lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+ pinctrl-single,pins = <
+ 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */
+ 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
+ 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
+ >;
+ };
+
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
- 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
- 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
- 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
>;
};
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
+ 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ >;
+ };
+
leds_pins: pinmux_leds_pins { };
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
clock-frequency = <2600000>;
twl: twl@48 {
#include "twl4030_omap3.dtsi"
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
- bus-width = <8>;
+ bus-width = <4>;
};
&mmc2 {
- status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&lbee1usjyc_vmmc>;
+ bus-width = <4>;
+ non-removable;
};
&mmc3 {
/*
- * Device Tree Source for IGEPv2 board
+ * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
#include "omap-gpmc-smsc911x.dtsi"
/ {
- model = "IGEPv2";
+ model = "IGEPv2 (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0020", "ti,omap3";
leds {
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb1_pins
+ &tfp410_pins
+ &dss_pins
>;
hsusbb1_pins: pinmux_hsusbb1_pins {
0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
>;
};
+
+ tfp410_pins: tfp410_dvi_pins {
+ pinctrl-single,pins = <
+ 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ >;
+ };
+
+ dss_pins: pinmux_dss_dvi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
};
&leds_pins {
&usbhsehci {
phys = <&hsusb1_phy>;
};
+
+&vpll2 {
+ /* Needed for DSS */
+ regulator-name = "vdds_dsi";
+};
/*
- * Device Tree Source for IGEP COM Module
+ * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
#include "omap3-igep.dtsi"
/ {
- model = "IGEP COM Module";
+ model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0030", "ti,omap3";
leds {
>;
};
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+ 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+ 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+ 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+ 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+ 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+ 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
+ 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
+ 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
+ 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
+ >;
+ };
+
display_pins: pinmux_display_pins {
pinctrl-single,pins = <
0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};
+/* most boards use vaux3, only some old versions use vmmc2 instead */
&mmc2 {
- status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vaux3>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+ non-removable;
};
&mmc3 {
ranges;
ti,hwmods = "l3_main";
+ aes: aes@480c5000 {
+ compatible = "ti,omap3-aes";
+ ti,hwmods = "aes";
+ reg = <0x480c5000 0x50>;
+ interrupts = <0>;
+ };
+
counter32k: counter@48320000 {
compatible = "ti,omap-counter32k";
reg = <0x48320000 0x20>;
ti,hwmods = "i2c3";
};
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap3-mailbox";
+ ti,hwmods = "mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>;
+ };
+
mcspi1: spi@48098000 {
compatible = "ti,omap2-mcspi";
reg = <0x48098000 0x100>;
dma-names = "tx", "rx";
};
+ mmu_isp: mmu@480bd400 {
+ compatible = "ti,omap3-mmu-isp";
+ ti,hwmods = "mmu_isp";
+ reg = <0x480bd400 0x80>;
+ interrupts = <8>;
+ };
+
wdt2: wdt@48314000 {
compatible = "ti,omap3-wdt";
reg = <0x48314000 0x80>;
dma-names = "tx", "rx";
};
+ sham: sham@480c3000 {
+ compatible = "ti,omap3-sham";
+ ti,hwmods = "sham";
+ reg = <0x480c3000 0x64>;
+ interrupts = <49>;
+ };
+
+ smartreflex_core: smartreflex@480cb000 {
+ compatible = "ti,omap3-smartreflex-core";
+ ti,hwmods = "smartreflex_core";
+ reg = <0x480cb000 0x400>;
+ interrupts = <19>;
+ };
+
+ smartreflex_mpu_iva: smartreflex@480c9000 {
+ compatible = "ti,omap3-smartreflex-iva";
+ ti,hwmods = "smartreflex_mpu_iva";
+ reg = <0x480c9000 0x400>;
+ interrupts = <18>;
+ };
+
timer1: timer@48318000 {
compatible = "ti,omap3430-timer";
reg = <0x48318000 0x400>;
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
-};
-
-&omap4_pmx_wkup {
- led_wkgpio_pins: pinmux_leds_wkpins {
- pinctrl-single,pins = <
- 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
- 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
- >;
- };
/*
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
pinctrl-single,pins = <
0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
};
};
+&omap4_pmx_wkup {
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
+ 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ >;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */
- 0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */
- 0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */
- 0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */
- 0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */
+ 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};
mpu_periph_clk: mpu_periph_clk {
#clock-cells = <0>;
- compatible = "altr,socfpga-gate-clk";
+ compatible = "altr,socfpga-perip-clk";
clocks = <&mpuclk>;
fixed-divider = <4>;
};
mpu_l2_ram_clk: mpu_l2_ram_clk {
#clock-cells = <0>;
- compatible = "altr,socfpga-gate-clk";
+ compatible = "altr,socfpga-perip-clk";
clocks = <&mpuclk>;
fixed-divider = <2>;
};
l3_main_clk: l3_main_clk {
#clock-cells = <0>;
- compatible = "altr,socfpga-gate-clk";
+ compatible = "altr,socfpga-perip-clk";
clocks = <&mainclk>;
+ fixed-divider = <1>;
};
l3_mp_clk: l3_mp_clk {
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_MDIO_SUN4I=y
+CONFIG_TI_CPSW=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_EDAC=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65910=y
CONFIG_TWL6040_CORE=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
+CONFIG_ARM_U8500_CPUIDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_PM_RUNTIME=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
* mapping to be mapped at. This is particularly important for
* non-high vector CPUs.
*/
-#define FIRST_USER_ADDRESS PAGE_SIZE
+#define FIRST_USER_ADDRESS (PAGE_SIZE * 2)
/*
* Use TASK_SIZE as the ceiling argument for free_pgtables() and
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
+#include <asm/fncpy.h>
#include <asm/mach-types.h>
#include <asm/smp_plat.h>
#include <asm/system_misc.h>
-extern const unsigned char relocate_new_kernel[];
+extern void relocate_new_kernel(void);
extern const unsigned int relocate_new_kernel_size;
extern unsigned long kexec_start_address;
{
unsigned long page_list;
unsigned long reboot_code_buffer_phys;
+ unsigned long reboot_entry = (unsigned long)relocate_new_kernel;
+ unsigned long reboot_entry_phys;
void *reboot_code_buffer;
/*
/* copy our kernel relocation code to the control code page */
- memcpy(reboot_code_buffer,
- relocate_new_kernel, relocate_new_kernel_size);
+ reboot_entry = fncpy(reboot_code_buffer,
+ reboot_entry,
+ relocate_new_kernel_size);
+ reboot_entry_phys = (unsigned long)reboot_entry +
+ (reboot_code_buffer_phys - (unsigned long)reboot_code_buffer);
-
- flush_icache_range((unsigned long) reboot_code_buffer,
- (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
if (kexec_reinit)
kexec_reinit();
- soft_restart(reboot_code_buffer_phys);
+ soft_restart(reboot_entry_phys);
}
* relocate_kernel.S - put the kernel image in place to boot
*/
+#include <linux/linkage.h>
#include <asm/kexec.h>
- .globl relocate_new_kernel
-relocate_new_kernel:
+ .align 3 /* not needed for this code, but keeps fncpy() happy */
+
+ENTRY(relocate_new_kernel)
ldr r0,kexec_indirection_page
ldr r1,kexec_start_address
kexec_boot_atags:
.long 0x0
+ENDPROC(relocate_new_kernel)
+
relocate_new_kernel_end:
.globl relocate_new_kernel_size
* snippets.
*/
+/*
+ * In CPU_THUMBONLY case kernel arm opcodes are not allowed.
+ * Note in this case codes skips those instructions but it uses .org
+ * directive to keep correct layout of sigreturn_codes array.
+ */
+#ifndef CONFIG_CPU_THUMBONLY
+#define ARM_OK(code...) code
+#else
+#define ARM_OK(code...)
+#endif
+
+ .macro arm_slot n
+ .org sigreturn_codes + 12 * (\n)
+ARM_OK( .arm )
+ .endm
+
+ .macro thumb_slot n
+ .org sigreturn_codes + 12 * (\n) + 8
+ .thumb
+ .endm
+
#if __LINUX_ARM_ARCH__ <= 4
/*
* Note we manually set minimally required arch that supports
.global sigreturn_codes
.type sigreturn_codes, #object
- .arm
+ .align
sigreturn_codes:
/* ARM sigreturn syscall code snippet */
- mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
- swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+ arm_slot 0
+ARM_OK( mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) )
+ARM_OK( swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
/* Thumb sigreturn syscall code snippet */
- .thumb
+ thumb_slot 0
movs r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
swi #0
/* ARM sigreturn_rt syscall code snippet */
- .arm
- mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
- swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+ arm_slot 1
+ARM_OK( mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) )
+ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
/* Thumb sigreturn_rt syscall code snippet */
- .thumb
+ thumb_slot 1
movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
swi #0
* it is thumb case or not, so we need additional
* word after real last entry.
*/
- .arm
+ arm_slot 2
.space 4
.size sigreturn_codes, . - sigreturn_codes
/*
* loops = r0 * HZ * loops_per_jiffy / 1000000
*/
+ .align 3
@ Delay routine
ENTRY(__loop_delay)
static struct clock_event_device clkevt = {
.name = "at91_tick",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
.rating = 150,
.set_next_event = clkevt32k_next_event,
.set_mode = clkevt32k_mode,
at91_st_write(AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
- clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
- clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
- clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
clkevt.cpumask = cpumask_of(0);
- clockevents_register_device(&clkevt);
+ clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+ 2, AT91_ST_ALMV);
/* register clocksource */
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
#include <mach/at91_ramc.h>
#include <mach/at91rm9200_sdramc.h>
+#ifdef CONFIG_PM
extern void at91_pm_set_standby(void (*at91_standby)(void));
+#else
+static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
+#endif
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
.name = "twi0_clk",
.pid = SAMA5D3_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
+ .div = AT91_PMC_PCR_DIV8,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pid = SAMA5D3_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
+ .div = AT91_PMC_PCR_DIV8,
};
static struct clk twi2_clk = {
.name = "twi2_clk",
.pid = SAMA5D3_ID_TWI2,
.type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
+ .div = AT91_PMC_PCR_DIV8,
};
static struct clk mmc0_clk = {
.name = "mci0_clk",
#include <linux/init.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <video/vga.h>
#include <asm/pgtable.h>
#include <asm/page.h>
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
}
+
+ vga_base = PCIMEM_BASE;
}
void footbridge_restart(enum reboot_mode mode, const char *cmd)
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/spinlock.h>
-#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
int cfn_mode;
pcibios_min_mem = 0x81000000;
- vga_base = PCIMEM_BASE;
mem_size = (unsigned int)high_memory - PAGE_OFFSET;
for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
const char *name;
const char *trigger;
} ebsa285_leds[] = {
- { "ebsa285:amber", "heartbeat", },
- { "ebsa285:green", "cpu0", },
+ { "ebsa285:amber", "cpu0", },
+ { "ebsa285:green", "heartbeat", },
{ "ebsa285:red",},
};
+static unsigned char hw_led_state;
+
static void ebsa285_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
struct ebsa285_led *led = container_of(cdev,
struct ebsa285_led, cdev);
- if (b != LED_OFF)
- *XBUS_LEDS |= led->mask;
+ if (b == LED_OFF)
+ hw_led_state |= led->mask;
else
- *XBUS_LEDS &= ~led->mask;
+ hw_led_state &= ~led->mask;
+ *XBUS_LEDS = hw_led_state;
}
static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
struct ebsa285_led *led = container_of(cdev,
struct ebsa285_led, cdev);
- return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+ return hw_led_state & led->mask ? LED_OFF : LED_FULL;
}
static int __init ebsa285_leds_init(void)
{
int i;
- if (machine_is_ebsa285())
+ if (!machine_is_ebsa285())
return -ENODEV;
- /* 3 LEDS All ON */
- *XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+ /* 3 LEDS all off */
+ hw_led_state = XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+ *XBUS_LEDS = hw_led_state;
for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
struct ebsa285_led *led;
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
-obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common)
obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
-obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
struct omap2_hsmmc_info;
-extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
extern void omap_reserve(void);
struct omap_hwmod;
#include "soc.h"
#include "iomap.h"
-#include "mux.h"
#include "control.h"
#include "display.h"
#include "prm.h"
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
-static void __init omap4_tpd12s015_mux_pads(void)
-{
- omap_mux_init_signal("hdmi_cec",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_scl",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_sda",
- OMAP_PIN_INPUT_PULLUP);
-}
-
-static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
-{
- u32 reg;
- u16 control_i2c_1;
-
- /*
- * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
- * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
- * internal pull up resistor.
- */
- if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
- control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
- reg = omap4_ctrl_pad_readl(control_i2c_1);
- reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
- OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
- omap4_ctrl_pad_writel(reg, control_i2c_1);
- }
-}
-
-static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
-{
- u32 enable_mask, enable_shift;
- u32 pipd_mask, pipd_shift;
- u32 reg;
-
- if (dsi_id == 0) {
- enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
- enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
- pipd_mask = OMAP4_DSI1_PIPD_MASK;
- pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
- } else if (dsi_id == 1) {
- enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
- enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
- pipd_mask = OMAP4_DSI2_PIPD_MASK;
- pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
- } else {
- return -ENODEV;
- }
-
- reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
- reg &= ~enable_mask;
- reg &= ~pipd_mask;
-
- reg |= (lanes << enable_shift) & enable_mask;
- reg |= (lanes << pipd_shift) & pipd_mask;
-
- omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
- return 0;
-}
-
-int __init omap_hdmi_init(enum omap_hdmi_flags flags)
-{
- if (cpu_is_omap44xx()) {
- omap4_hdmi_mux_pads(flags);
- omap4_tpd12s015_mux_pads();
- }
-
- return 0;
-}
-
static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
{
- if (cpu_is_omap44xx())
- return omap4_dsi_mux_pads(dsi_id, lane_mask);
-
return 0;
}
static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
{
- if (cpu_is_omap44xx())
- omap4_dsi_mux_pads(dsi_id, 0);
}
static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)
static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
- .i2c_bus_num = 3,
+ .i2c_bus_num = 2,
};
static struct platform_device omap3_igep2_dvi_connector_device = {
return ret;
}
+ /*
+ * For some GPMC devices we still need to rely on the bootloader
+ * timings because the devices can be connected via FPGA. So far
+ * the list is smc91x on the omap2 SDP boards, and 8250 on zooms.
+ * REVISIT: Add timing support from slls644g.pdf and from the
+ * lan91c96 manual.
+ */
+ if (of_device_is_compatible(child, "ns16550a") ||
+ of_device_is_compatible(child, "smsc,lan91c94") ||
+ of_device_is_compatible(child, "smsc,lan91c111")) {
+ dev_warn(&pdev->dev,
+ "%s using bootloader timings on CS%d\n",
+ child->name, cs);
+ goto no_timings;
+ }
+
/*
* FIXME: gpmc_cs_request() will map the CS to an arbitary
* location in the gpmc address space. When booting with
gpmc_read_timings_dt(child, &gpmc_t);
gpmc_cs_set_timings(cs, &gpmc_t);
+no_timings:
if (of_platform_device_create(child, NULL, &pdev->dev))
return 0;
return ret;
}
-/*
- * REVISIT: Add timing support from slls644g.pdf
- */
-static int gpmc_probe_8250(struct platform_device *pdev,
- struct device_node *child)
-{
- struct resource res;
- unsigned long base;
- int ret, cs;
-
- if (of_property_read_u32(child, "reg", &cs) < 0) {
- dev_err(&pdev->dev, "%s has no 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- if (of_address_to_resource(child, 0, &res) < 0) {
- dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- ret = gpmc_cs_request(cs, resource_size(&res), &base);
- if (ret < 0) {
- dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
- return ret;
- }
-
- if (of_platform_device_create(child, NULL, &pdev->dev))
- return 0;
-
- dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
-
- return -ENODEV;
-}
-
static int gpmc_probe_dt(struct platform_device *pdev)
{
int ret;
else if (of_node_cmp(child->name, "onenand") == 0)
ret = gpmc_probe_onenand_child(pdev, child);
else if (of_node_cmp(child->name, "ethernet") == 0 ||
- of_node_cmp(child->name, "nor") == 0)
+ of_node_cmp(child->name, "nor") == 0 ||
+ of_node_cmp(child->name, "uart") == 0)
ret = gpmc_probe_generic_child(pdev, child);
- else if (of_node_cmp(child->name, "8250") == 0)
- ret = gpmc_probe_8250(pdev, child);
if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
__func__, child->full_name))
{ }
#endif
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
void set_cntfreq(void);
+#else
+static inline void set_cntfreq(void)
+{
+}
+#endif
+
#endif /* __ASSEMBLER__ */
#endif /* OMAP_ARCH_OMAP_SECURE_H */
#include "iomap.h"
#include "common.h"
#include "mmc.h"
-#include "hsmmc.h"
#include "prminst44xx.h"
#include "prcm_mpu44xx.h"
#include "omap4-sar-layout.h"
omap_wakeupgen_init();
irqchip_init();
}
-
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
- int irq = 0;
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct omap_mmc_platform_data *pdata = dev->platform_data;
-
- /* Setting MMC1 Card detect Irq */
- if (pdev->id == 0) {
- irq = twl6030_mmc_card_detect_config();
- if (irq < 0) {
- dev_err(dev, "%s: Error card detect config(%d)\n",
- __func__, irq);
- return irq;
- }
- pdata->slots[0].card_detect_irq = irq;
- pdata->slots[0].card_detect = twl6030_mmc_card_detect;
- }
- return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
- struct omap_mmc_platform_data *pdata;
-
- /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
- if (!dev) {
- pr_err("Failed %s\n", __func__);
- return;
- }
- pdata = dev->platform_data;
- pdata->init = omap4_twl6030_hsmmc_late_init;
-}
-
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
- struct omap2_hsmmc_info *c;
-
- omap_hsmmc_init(controllers);
- for (c = controllers; c->mmc; c++) {
- /* pdev can be null if CONFIG_MMC_OMAP_HS is not set */
- if (!c->pdev)
- continue;
- omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
- }
-
- return 0;
-}
-#else
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
- return 0;
-}
-#endif
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
+ { "nokia,omap3-n900", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
* will hang the system.
*/
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
- ret = _omap_save_secure_sram((u32 *)
+ ret = _omap_save_secure_sram((u32 *)(unsigned long)
__pa(omap3_secure_ram_storage));
pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
/* Following is for error tracking, it should not happen */
for (i = 0; i < pwrdm->banks; i++)
pwrdm->ret_mem_off_counter[i] = 0;
- arch_pwrdm->pwrdm_wait_transition(pwrdm);
+ if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition)
+ arch_pwrdm->pwrdm_wait_transition(pwrdm);
pwrdm->state = pwrdm_read_pwrst(pwrdm);
pwrdm->state_counter[pwrdm->state] = 1;
extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
- defined(CONFIG_SOC_DRA7XX)
+ defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
void omap44xx_prm_reconfigure_io_chain(void);
#else
static inline void omap44xx_prm_reconfigure_io_chain(void)
select GENERIC_CLOCKEVENTS
select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MFD_SYSCON
select SPARSE_IRQ
tegra_sku_id, tegra_cpu_process_id,
tegra_core_process_id);
}
-
-unsigned long long tegra_chip_uid(void)
-{
- unsigned long long lo, hi;
-
- lo = tegra_fuse_readl(FUSE_UID_LOW);
- hi = tegra_fuse_readl(FUSE_UID_HIGH);
- return (hi << 32ull) | lo;
-}
-EXPORT_SYMBOL(tegra_chip_uid);
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA bindings. */
+ OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
"ux500-msp-i2s.0", &msp0_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
#define A15_BX_ADDR0 0x68
#define A7_BX_ADDR0 0x78
+/* SPC CPU/cluster reset statue */
+#define STANDBYWFI_STAT 0x3c
+#define STANDBYWFI_STAT_A15_CPU_MASK(cpu) (1 << (cpu))
+#define STANDBYWFI_STAT_A7_CPU_MASK(cpu) (1 << (3 + (cpu)))
+
/* SPC system config interface registers */
#define SYSCFG_WDATA 0x70
#define SYSCFG_RDATA 0x74
writel_relaxed(enable, info->baseaddr + pwdrn_reg);
}
+static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster)
+{
+ return cluster_is_a15(cluster) ?
+ STANDBYWFI_STAT_A15_CPU_MASK(cpu)
+ : STANDBYWFI_STAT_A7_CPU_MASK(cpu);
+}
+
+/**
+ * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+ *
+ * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ *
+ * @return: non-zero if and only if the specified CPU is in WFI
+ *
+ * Take care when interpreting the result of this function: a CPU might
+ * be in WFI temporarily due to idle, and is not necessarily safely
+ * parked.
+ */
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+{
+ int ret;
+ u32 mask = standbywfi_cpu_mask(cpu, cluster);
+
+ if (cluster >= MAX_CLUSTERS)
+ return 1;
+
+ ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT);
+
+ pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n",
+ __func__, STANDBYWFI_STAT, ret, mask);
+
+ return ret & mask;
+}
+
static int ve_spc_get_performance(int cluster, u32 *freq)
{
struct ve_spc_opp *opps = info->opps[cluster];
void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
void ve_spc_powerdown(u32 cluster, bool enable);
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster);
#endif
* published by the Free Software Foundation.
*/
+#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include "spc.h"
/* SCC conf registers */
+#define RESET_CTRL 0x018
+#define RESET_A15_NCORERESET(cpu) (1 << (2 + (cpu)))
+#define RESET_A7_NCORERESET(cpu) (1 << (16 + (cpu)))
+
#define A15_CONF 0x400
#define A7_CONF 0x500
#define SYS_INFO 0x700
#define SPC_BASE 0xb00
+static void __iomem *scc;
+
/*
* We can't use regular spinlocks. In the switcher case, it is possible
* for an outbound CPU to call power_down() after its inbound counterpart
tc2_pm_down(0);
}
+static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster)
+{
+ u32 mask = cluster ?
+ RESET_A7_NCORERESET(cpu)
+ : RESET_A15_NCORERESET(cpu);
+
+ return !(readl_relaxed(scc + RESET_CTRL) & mask);
+}
+
+#define POLL_MSEC 10
+#define TIMEOUT_MSEC 1000
+
+static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster)
+{
+ unsigned tries;
+
+ pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+ BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+ for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) {
+ /*
+ * Only examine the hardware state if the target CPU has
+ * caught up at least as far as tc2_pm_down():
+ */
+ if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) {
+ pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n",
+ __func__, cpu, cluster,
+ readl_relaxed(scc + RESET_CTRL));
+
+ /*
+ * We need the CPU to reach WFI, but the power
+ * controller may put the cluster in reset and
+ * power it off as soon as that happens, before
+ * we have a chance to see STANDBYWFI.
+ *
+ * So we need to check for both conditions:
+ */
+ if (tc2_core_in_reset(cpu, cluster) ||
+ ve_spc_cpu_in_wfi(cpu, cluster))
+ return 0; /* success: the CPU is halted */
+ }
+
+ /* Otherwise, wait and retry: */
+ msleep(POLL_MSEC);
+ }
+
+ return -ETIMEDOUT; /* timeout */
+}
+
static void tc2_pm_suspend(u64 residency)
{
unsigned int mpidr, cpu, cluster;
}
static const struct mcpm_platform_ops tc2_pm_power_ops = {
- .power_up = tc2_pm_power_up,
- .power_down = tc2_pm_power_down,
- .suspend = tc2_pm_suspend,
- .powered_up = tc2_pm_powered_up,
+ .power_up = tc2_pm_power_up,
+ .power_down = tc2_pm_power_down,
+ .power_down_finish = tc2_pm_power_down_finish,
+ .suspend = tc2_pm_suspend,
+ .powered_up = tc2_pm_powered_up,
};
static bool __init tc2_pm_usage_count_init(void)
static int __init tc2_pm_init(void)
{
int ret, irq;
- void __iomem *scc;
u32 a15_cluster_id, a7_cluster_id, sys_info;
struct device_node *np;
*
* DMA uncached mapping support.
*/
+#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/gfp.h>
u64 mask = (u64)DMA_BIT_MASK(32);
if (dev) {
+ unsigned long max_dma_pfn;
+
mask = dev->coherent_dma_mask;
/*
return 0;
}
+ max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
+
/*
* If the mask allows for more memory than we can address,
* and we actually have that much memory, then fail the
*/
if (sizeof(mask) != sizeof(dma_addr_t) &&
mask > (dma_addr_t)~0 &&
- dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) {
+ dma_to_pfn(dev, ~0) > max_dma_pfn) {
dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
mask);
dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
* fits within the allowable addresses which we can
* allocate.
*/
- if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) {
+ if (dma_to_pfn(dev, mask) < max_dma_pfn) {
dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
mask,
dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
info.flags = VM_UNMAPPED_AREA_TOPDOWN;
info.length = len;
- info.low_limit = PAGE_SIZE;
+ info.low_limit = FIRST_USER_ADDRESS;
info.high_limit = mm->mmap_base;
info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0;
info.align_offset = pgoff << PAGE_SHIFT;
init_pud = pud_offset(init_pgd, 0);
init_pmd = pmd_offset(init_pud, 0);
init_pte = pte_offset_map(init_pmd, 0);
- set_pte_ext(new_pte, *init_pte, 0);
+ set_pte_ext(new_pte + 0, init_pte[0], 0);
+ set_pte_ext(new_pte + 1, init_pte[1], 0);
pte_unmap(init_pte);
pte_unmap(new_pte);
}
if (timer->posted)
return;
- if (timer->errata & OMAP_TIMER_ERRATA_I103_I767)
+ if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+ timer->posted = OMAP_TIMER_NONPOSTED;
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
return;
+ }
__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
OMAP_TIMER_CTRL_POSTED, 0);
struct rb_node rbnode_phys;
};
-rwlock_t p2m_lock;
+static rwlock_t p2m_lock;
struct rb_root phys_to_mach = RB_ROOT;
+EXPORT_SYMBOL_GPL(phys_to_mach);
static struct rb_root mach_to_phys = RB_ROOT;
static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new)
}
EXPORT_SYMBOL_GPL(__set_phys_to_machine);
-int p2m_init(void)
+static int p2m_init(void)
{
rwlock_init(&p2m_lock);
return 0;
/dts-v1/;
+/memreserve/ 0x80000000 0x00010000;
+
/ {
model = "Foundation-v8A";
compatible = "arm,foundation-aarch64", "arm,vexpress";
#define local_fiq_enable() asm("msr daifclr, #1" : : : "memory")
#define local_fiq_disable() asm("msr daifset, #1" : : : "memory")
+#define local_async_enable() asm("msr daifclr, #4" : : : "memory")
+#define local_async_disable() asm("msr daifset, #4" : : : "memory")
+
/*
* Save the current interrupt enable state.
*/
* Software defined PTE bits definition.
*/
#define PTE_VALID (_AT(pteval_t, 1) << 0)
-#define PTE_PROT_NONE (_AT(pteval_t, 1) << 2) /* only when !PTE_VALID */
-#define PTE_FILE (_AT(pteval_t, 1) << 3) /* only when !pte_present() */
+#define PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !pte_present() */
#define PTE_DIRTY (_AT(pteval_t, 1) << 55)
#define PTE_SPECIAL (_AT(pteval_t, 1) << 56)
+ /* bit 57 for PMD_SECT_SPLITTING */
+#define PTE_PROT_NONE (_AT(pteval_t, 1) << 58) /* only when !PTE_VALID */
/*
* VMALLOC and SPARSEMEM_VMEMMAP ranges.
#define pgprot_noncached(prot) \
__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE))
#define pgprot_writecombine(prot) \
- __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_GRE))
+ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC))
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC))
#define __HAVE_PHYS_MEM_ACCESS_PROT
/*
* Encode and decode a swap entry:
- * bits 0, 2: present (must both be zero)
- * bit 3: PTE_FILE
- * bits 4-8: swap type
- * bits 9-63: swap offset
+ * bits 0-1: present (must be zero)
+ * bit 2: PTE_FILE
+ * bits 3-8: swap type
+ * bits 9-57: swap offset
*/
-#define __SWP_TYPE_SHIFT 4
+#define __SWP_TYPE_SHIFT 3
#define __SWP_TYPE_BITS 6
+#define __SWP_OFFSET_BITS 49
#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+#define __SWP_OFFSET_MASK ((1UL << __SWP_OFFSET_BITS) - 1)
#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
-#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_offset(x) (((x).val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK)
#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
/*
* Encode and decode a file entry:
- * bits 0, 2: present (must both be zero)
- * bit 3: PTE_FILE
- * bits 4-63: file offset / PAGE_SIZE
+ * bits 0-1: present (must be zero)
+ * bit 2: PTE_FILE
+ * bits 3-57: file offset / PAGE_SIZE
*/
#define pte_file(pte) (pte_val(pte) & PTE_FILE)
-#define pte_to_pgoff(x) (pte_val(x) >> 4)
-#define pgoff_to_pte(x) __pte(((x) << 4) | PTE_FILE)
+#define pte_to_pgoff(x) (pte_val(x) >> 3)
+#define pgoff_to_pte(x) __pte(((x) << 3) | PTE_FILE)
-#define PTE_FILE_MAX_BITS 60
+#define PTE_FILE_MAX_BITS 55
extern int kern_addr_valid(unsigned long addr);
int aarch32_break_handler(struct pt_regs *regs)
{
siginfo_t info;
- unsigned int instr;
+ u32 arm_instr;
+ u16 thumb_instr;
bool bp = false;
void __user *pc = (void __user *)instruction_pointer(regs);
if (compat_thumb_mode(regs)) {
/* get 16-bit Thumb instruction */
- get_user(instr, (u16 __user *)pc);
- if (instr == AARCH32_BREAK_THUMB2_LO) {
+ get_user(thumb_instr, (u16 __user *)pc);
+ thumb_instr = le16_to_cpu(thumb_instr);
+ if (thumb_instr == AARCH32_BREAK_THUMB2_LO) {
/* get second half of 32-bit Thumb-2 instruction */
- get_user(instr, (u16 __user *)(pc + 2));
- bp = instr == AARCH32_BREAK_THUMB2_HI;
+ get_user(thumb_instr, (u16 __user *)(pc + 2));
+ thumb_instr = le16_to_cpu(thumb_instr);
+ bp = thumb_instr == AARCH32_BREAK_THUMB2_HI;
} else {
- bp = instr == AARCH32_BREAK_THUMB;
+ bp = thumb_instr == AARCH32_BREAK_THUMB;
}
} else {
/* 32-bit ARM instruction */
- get_user(instr, (u32 __user *)pc);
- bp = (instr & ~0xf0000000) == AARCH32_BREAK_ARM;
+ get_user(arm_instr, (u32 __user *)pc);
+ arm_instr = le32_to_cpu(arm_instr);
+ bp = (arm_instr & ~0xf0000000) == AARCH32_BREAK_ARM;
}
if (!bp)
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
#endif
-#ifdef CONFIG_PREEMPT
- get_thread_info tsk
- ldr w24, [tsk, #TI_PREEMPT] // get preempt count
- add w0, w24, #1 // increment it
- str w0, [tsk, #TI_PREEMPT]
-#endif
+
irq_handler
+
#ifdef CONFIG_PREEMPT
- str w24, [tsk, #TI_PREEMPT] // restore preempt count
+ get_thread_info tsk
+ ldr w24, [tsk, #TI_PREEMPT] // restore preempt count
cbnz w24, 1f // preempt count != 0
ldr x0, [tsk, #TI_FLAGS] // get flags
tbz x0, #TIF_NEED_RESCHED, 1f // needs rescheduling?
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
#endif
- get_thread_info tsk
-#ifdef CONFIG_PREEMPT
- ldr w24, [tsk, #TI_PREEMPT] // get preempt count
- add w23, w24, #1 // increment it
- str w23, [tsk, #TI_PREEMPT]
-#endif
+
irq_handler
-#ifdef CONFIG_PREEMPT
- ldr w0, [tsk, #TI_PREEMPT]
- str w24, [tsk, #TI_PREEMPT]
- cmp w0, w23
- b.eq 1f
- mov x1, #0
- str x1, [x1] // BUG
-1:
-#endif
+ get_thread_info tsk
+
#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_on
#endif
for (i = 0; i < num_regs; ++i) {
unsigned int idx = start + i;
- void *reg;
+ compat_ulong_t reg;
switch (idx) {
case 15:
- reg = (void *)&task_pt_regs(target)->pc;
+ reg = task_pt_regs(target)->pc;
break;
case 16:
- reg = (void *)&task_pt_regs(target)->pstate;
+ reg = task_pt_regs(target)->pstate;
break;
case 17:
- reg = (void *)&task_pt_regs(target)->orig_x0;
+ reg = task_pt_regs(target)->orig_x0;
break;
default:
- reg = (void *)&task_pt_regs(target)->regs[idx];
+ reg = task_pt_regs(target)->regs[idx];
}
- ret = copy_to_user(ubuf, reg, sizeof(compat_ulong_t));
-
+ ret = copy_to_user(ubuf, ®, sizeof(reg));
if (ret)
break;
- else
- ubuf += sizeof(compat_ulong_t);
+
+ ubuf += sizeof(reg);
}
return ret;
for (i = 0; i < num_regs; ++i) {
unsigned int idx = start + i;
- void *reg;
+ compat_ulong_t reg;
+
+ ret = copy_from_user(®, ubuf, sizeof(reg));
+ if (ret)
+ return ret;
+
+ ubuf += sizeof(reg);
switch (idx) {
case 15:
- reg = (void *)&newregs.pc;
+ newregs.pc = reg;
break;
case 16:
- reg = (void *)&newregs.pstate;
+ newregs.pstate = reg;
break;
case 17:
- reg = (void *)&newregs.orig_x0;
+ newregs.orig_x0 = reg;
break;
default:
- reg = (void *)&newregs.regs[idx];
+ newregs.regs[idx] = reg;
}
- ret = copy_from_user(reg, ubuf, sizeof(compat_ulong_t));
-
- if (ret)
- goto out;
- else
- ubuf += sizeof(compat_ulong_t);
}
if (valid_user_regs(&newregs.user_regs))
else
ret = -EINVAL;
-out:
return ret;
}
void __init setup_arch(char **cmdline_p)
{
+ /*
+ * Unmask asynchronous aborts early to catch possible system errors.
+ */
+ local_async_enable();
+
setup_processor();
setup_machine_fdt(__fdt_pointer);
local_irq_enable();
local_fiq_enable();
+ local_async_enable();
/*
* OK, it's off to the idle thread for us
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_NS87415=y
-CONFIG_BLK_DEV_SIIMAGE=m
+CONFIG_PATA_SIL680=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_MODVERSIONS=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_PA8X00=y
-CONFIG_MLONGCALLS=y
CONFIG_64BIT=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_SIIMAGE=y
-CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_ATA=y
+CONFIG_PATA_SIL680=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_SAS=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
CONFIG_INPUT_MISC=y
-CONFIG_INPUT_CM109=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_GSCPS2=m
CONFIG_SND_AD1889=m
# CONFIG_SND_USB is not set
# CONFIG_SND_GSC is not set
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_LOGITECH_DJ=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_ORTEK=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_HID_ZEROPLUS=m
-CONFIG_USB_HID=m
CONFIG_USB=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_PA8X00=y
-CONFIG_MLONGCALLS=y
CONFIG_64BIT=y
CONFIG_SMP=y
# CONFIG_COMPACTION is not set
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_NS87415=y
-CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_DH=y
CONFIG_ATA=y
+CONFIG_PATA_SIL680=y
CONFIG_ATA_GENERIC=y
CONFIG_MD=y
CONFIG_MD_LINEAR=m
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
-# CONFIG_INPUT_MOUSE is not set
+# CONFIG_MOUSE_PS2 is not set
CONFIG_INPUT_MISC=y
CONFIG_SERIO_SERPORT=m
# CONFIG_HP_SDC is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_HID=m
CONFIG_HIDRAW=y
-CONFIG_HID_DRAGONRISE=m
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_HID_NTRIG=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_ZEROPLUS=m
-CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_MON=m
CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_XHCI_HCD=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
* This is used for 16550-compatible UARTs
*/
#define BASE_BAUD ( 1843200 / 16 )
-
-#define SERIAL_PORT_DFNS
* HP PARISC Hardware Database
* Access to this database is only possible during bootup
* so don't reference this table after starting the init process
+ *
+ * NOTE: Product names which are listed here and ends with a '?'
+ * are guessed. If you know the correct name, please let us know.
*/
static struct hp_hardware hp_hardware_list[] = {
{HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"},
{HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"},
{HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"},
- {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+? (rp5470)"},
+ {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+ (rp5470)?"},
{HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"},
{HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"},
{HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"},
{HPHW_NPROC,0x888,0x4,0x91,"Storm Peak Fast DC-"},
{HPHW_NPROC,0x889,0x4,0x91,"Storm Peak Fast"},
{HPHW_NPROC,0x88A,0x4,0x91,"Crestone Peak Slow"},
+ {HPHW_NPROC,0x88B,0x4,0x91,"Crestone Peak Fast?"},
{HPHW_NPROC,0x88C,0x4,0x91,"Orca Mako+"},
{HPHW_NPROC,0x88D,0x4,0x91,"Rainier/Medel Mako+ Slow"},
{HPHW_NPROC,0x88E,0x4,0x91,"Rainier/Medel Mako+ Fast"},
+ {HPHW_NPROC,0x892,0x4,0x91,"Mt. Hamilton Slow Mako+?"},
{HPHW_NPROC,0x894,0x4,0x91,"Mt. Hamilton Fast Mako+"},
{HPHW_NPROC,0x895,0x4,0x91,"Storm Peak Slow Mako+"},
{HPHW_NPROC,0x896,0x4,0x91,"Storm Peak Fast Mako+"},
.import fault_vector_11,code /* IVA parisc 1.1 32 bit */
.import $global$ /* forward declaration */
#endif /*!CONFIG_64BIT*/
- .export _stext,data /* Kernel want it this way! */
-_stext:
-ENTRY(stext)
+ENTRY(parisc_kernel_start)
.proc
.callinfo
.procend
#endif /* CONFIG_SMP */
-ENDPROC(stext)
+ENDPROC(parisc_kernel_start)
#ifndef CONFIG_64BIT
.section .data..read_mostly
return (unsigned long) mapping >> 8;
}
-static unsigned long get_shared_area(struct address_space *mapping,
- unsigned long addr, unsigned long len, unsigned long pgoff)
+static unsigned long shared_align_offset(struct file *filp, unsigned long pgoff)
+{
+ struct address_space *mapping = filp ? filp->f_mapping : NULL;
+
+ return (get_offset(mapping) + pgoff) << PAGE_SHIFT;
+}
+
+static unsigned long get_shared_area(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff)
{
struct vm_unmapped_area_info info;
info.low_limit = PAGE_ALIGN(addr);
info.high_limit = TASK_SIZE;
info.align_mask = PAGE_MASK & (SHMLBA - 1);
- info.align_offset = (get_offset(mapping) + pgoff) << PAGE_SHIFT;
+ info.align_offset = shared_align_offset(filp, pgoff);
return vm_unmapped_area(&info);
}
return -ENOMEM;
if (flags & MAP_FIXED) {
if ((flags & MAP_SHARED) &&
- (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
+ (addr - shared_align_offset(filp, pgoff)) & (SHMLBA - 1))
return -EINVAL;
return addr;
}
if (!addr)
addr = TASK_UNMAPPED_BASE;
- if (filp) {
- addr = get_shared_area(filp->f_mapping, addr, len, pgoff);
- } else if(flags & MAP_SHARED) {
- addr = get_shared_area(NULL, addr, len, pgoff);
- } else {
+ if (filp || (flags & MAP_SHARED))
+ addr = get_shared_area(filp, addr, len, pgoff);
+ else
addr = get_unshared_area(addr, len);
- }
+
return addr;
}
}
/* Called from setup_arch to import the kernel unwind info */
-int unwind_init(void)
+int __init unwind_init(void)
{
long start, stop;
register unsigned long gp __asm__ ("r27");
e = find_unwind_entry(info->ip);
if (e == NULL) {
unsigned long sp;
- extern char _stext[], _etext[];
dbg("Cannot find unwind entry for 0x%lx; forced unwinding\n", info->ip);
break;
info->prev_ip = tmp;
sp = info->prev_sp;
- } while (info->prev_ip < (unsigned long)_stext ||
- info->prev_ip > (unsigned long)_etext);
+ } while (!kernel_text_address(info->prev_ip));
info->rp = 0;
do {
if (unwind_once(&info) < 0 || info.ip == 0)
return 0;
- if (!__kernel_text_address(info.ip)) {
+ if (!kernel_text_address(info.ip))
return 0;
- }
} while (info.ip && level--);
return info.ip;
* Copyright (C) 2000 Michael Ang <mang with subcarrier.org>
* Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
* Copyright (C) 2003 James Bottomley <jejb with parisc-linux.org>
- * Copyright (C) 2006 Helge Deller <deller@gmx.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * Copyright (C) 2006-2013 Helge Deller <deller@gmx.de>
+ */
+
+/*
+ * Put page table entries (swapper_pg_dir) as the first thing in .bss. This
+ * will ensure that it has .bss alignment (PAGE_SIZE).
*/
+#define BSS_FIRST_SECTIONS *(.data..vm0.pmd) \
+ *(.data..vm0.pgd) \
+ *(.data..vm0.pte)
+
#include <asm-generic/vmlinux.lds.h>
+
/* needed for the processor specific cache alignment size */
#include <asm/cache.h>
#include <asm/page.h>
OUTPUT_ARCH(hppa:hppa2.0w)
#endif
-ENTRY(_stext)
+ENTRY(parisc_kernel_start)
#ifndef CONFIG_64BIT
jiffies = jiffies_64 + 4;
#else
{
. = KERNEL_BINARY_TEXT_START;
+ __init_begin = .;
+ HEAD_TEXT_SECTION
+ INIT_TEXT_SECTION(8)
+
+ . = ALIGN(PAGE_SIZE);
+ INIT_DATA_SECTION(PAGE_SIZE)
+ /* we have to discard exit text and such at runtime, not link time */
+ .exit.text :
+ {
+ EXIT_TEXT
+ }
+ .exit.data :
+ {
+ EXIT_DATA
+ }
+ PERCPU_SECTION(8)
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+ /* freed after init ends here */
+
_text = .; /* Text and read-only data */
- .head ALIGN(16) : {
- HEAD_TEXT
- } = 0
- .text ALIGN(16) : {
+ _stext = .;
+ .text ALIGN(PAGE_SIZE) : {
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
*(.lock.text) /* out-of-line lock text */
*(.gnu.warning)
}
- /* End of text section */
+ . = ALIGN(PAGE_SIZE);
_etext = .;
+ /* End of text section */
/* Start of data section */
_sdata = .;
- RODATA
+ RO_DATA_SECTION(8)
- /* writeable */
- /* Make sure this is page aligned so
- * that we can properly leave these
- * as writable
- */
- . = ALIGN(PAGE_SIZE);
- data_start = .;
+#ifdef CONFIG_64BIT
+ . = ALIGN(16);
+ /* Linkage tables */
+ .opd : {
+ *(.opd)
+ } PROVIDE (__gp = .);
+ .plt : {
+ *(.plt)
+ }
+ .dlt : {
+ *(.dlt)
+ }
+#endif
/* unwind info */
.PARISC.unwind : {
__stop___unwind = .;
}
- EXCEPTION_TABLE(16)
+ /* writeable */
+ /* Make sure this is page aligned so
+ * that we can properly leave these
+ * as writable
+ */
+ . = ALIGN(PAGE_SIZE);
+ data_start = .;
+
+ EXCEPTION_TABLE(8)
NOTES
/* Data */
_edata = .;
/* BSS */
- __bss_start = .;
- /* page table entries need to be PAGE_SIZE aligned */
- . = ALIGN(PAGE_SIZE);
- .data..vmpages : {
- *(.data..vm0.pmd)
- *(.data..vm0.pgd)
- *(.data..vm0.pte)
- }
- .bss : {
- *(.bss)
- *(COMMON)
- }
- __bss_stop = .;
-
-#ifdef CONFIG_64BIT
- . = ALIGN(16);
- /* Linkage tables */
- .opd : {
- *(.opd)
- } PROVIDE (__gp = .);
- .plt : {
- *(.plt)
- }
- .dlt : {
- *(.dlt)
- }
-#endif
+ BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 8)
- /* reserve space for interrupt stack by aligning __init* to 16k */
- . = ALIGN(16384);
- __init_begin = .;
- INIT_TEXT_SECTION(16384)
- . = ALIGN(PAGE_SIZE);
- INIT_DATA_SECTION(16)
- /* we have to discard exit text and such at runtime, not link time */
- .exit.text :
- {
- EXIT_TEXT
- }
- .exit.data :
- {
- EXIT_DATA
- }
-
- PERCPU_SECTION(L1_CACHE_BYTES)
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
- /* freed after init ends here */
_end = . ;
STABS_DEBUG
#include <asm/sections.h>
extern int data_start;
+extern void parisc_kernel_start(void); /* Kernel entry point in head.S */
#if PT_NLEVELS == 3
/* NOTE: This layout exactly conforms to the hybrid L2/L3 page table layout
reserve_bootmem_node(NODE_DATA(0), 0UL,
(unsigned long)(PAGE0->mem_free +
PDC_CONSOLE_IO_IODC_SIZE), BOOTMEM_DEFAULT);
- reserve_bootmem_node(NODE_DATA(0), __pa((unsigned long)_text),
- (unsigned long)(_end - _text), BOOTMEM_DEFAULT);
+ reserve_bootmem_node(NODE_DATA(0), __pa(KERNEL_BINARY_TEXT_START),
+ (unsigned long)(_end - KERNEL_BINARY_TEXT_START),
+ BOOTMEM_DEFAULT);
reserve_bootmem_node(NODE_DATA(0), (bootmap_start_pfn << PAGE_SHIFT),
((bootmap_pfn - bootmap_start_pfn) << PAGE_SHIFT),
BOOTMEM_DEFAULT);
request_resource(&sysram_resources[0], &pdcdata_resource);
}
+static int __init parisc_text_address(unsigned long vaddr)
+{
+ static unsigned long head_ptr __initdata;
+
+ if (!head_ptr)
+ head_ptr = PAGE_MASK & (unsigned long)
+ dereference_function_descriptor(&parisc_kernel_start);
+
+ return core_kernel_text(vaddr) || vaddr == head_ptr;
+}
+
static void __init map_pages(unsigned long start_vaddr,
unsigned long start_paddr, unsigned long size,
pgprot_t pgprot, int force)
*/
if (force)
pte = __mk_pte(address, pgprot);
- else if (core_kernel_text(vaddr) &&
+ else if (parisc_text_address(vaddr) &&
address != fv_addr)
pte = __mk_pte(address, PAGE_KERNEL_EXEC);
else
GNUTARGET := powerpcle
MULTIPLEWORD := -mno-multiple
else
+ifeq ($(call cc-option-yn,-mbig-endian),y)
override CC += -mbig-endian
override AS += -mbig-endian
+endif
override LD += -EB
LDEMULATION := ppc
GNUTARGET := powerpc
CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
+# Altivec option not allowed with e500mc64 in GCC.
+ifeq ($(CONFIG_ALTIVEC),y)
+E5500_CPU := -mcpu=powerpc64
+else
E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
+endif
CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
- interupts = <61 2 >;
+ interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
- interupts = <75 2>;
+ interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
add r4,r4,r5
addi r4,r4,-1
divw r4,r4,r5 /* BUS ticks */
+#ifdef CONFIG_8xx
+1: mftbu r5
+ mftb r6
+ mftbu r7
+#else
1: mfspr r5, SPRN_TBRU
mfspr r6, SPRN_TBRL
mfspr r7, SPRN_TBRU
+#endif
cmpw 0,r5,r7
bne 1b /* Get [synced] base time */
addc r9,r6,r4 /* Compute end time */
addze r8,r5
+#ifdef CONFIG_8xx
+2: mftbu r5
+#else
2: mfspr r5, SPRN_TBRU
+#endif
cmpw 0,r5,r8
blt 2b
bgt 3f
+#ifdef CONFIG_8xx
+ mftb r6
+#else
mfspr r6, SPRN_TBRL
+#endif
cmpw 0,r6,r9
blt 2b
3: blr
unsigned long phys;
unsigned long virt_addr;
};
+extern struct vmemmap_backing *vmemmap_list;
/*
* Functions that deal with pagetables that could be at any level of
cmpwi dest,0; \
beq- 90b; \
END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
+#elif defined(CONFIG_8xx)
+#define MFTB(dest) mftb dest
#else
#define MFTB(dest) mfspr dest, SPRN_TBRL
#endif
#else /* __powerpc64__ */
+#if defined(CONFIG_8xx)
+#define mftbl() ({unsigned long rval; \
+ asm volatile("mftbl %0" : "=r" (rval)); rval;})
+#define mftbu() ({unsigned long rval; \
+ asm volatile("mftbu %0" : "=r" (rval)); rval;})
+#else
#define mftbl() ({unsigned long rval; \
asm volatile("mfspr %0, %1" : "=r" (rval) : \
"i" (SPRN_TBRL)); rval;})
#define mftbu() ({unsigned long rval; \
asm volatile("mfspr %0, %1" : "=r" (rval) : \
"i" (SPRN_TBRU)); rval;})
+#endif
#endif /* !__powerpc64__ */
#define mttbl(v) asm volatile("mttbl %0":: "r"(v))
ret = 0;
__asm__ __volatile__(
+#ifdef CONFIG_8xx
+ "97: mftb %0\n"
+#else
"97: mfspr %0, %2\n"
+#endif
"99:\n"
".section __ftr_fixup,\"a\"\n"
".align 2\n"
" .long 0\n"
" .long 0\n"
".previous"
+#ifdef CONFIG_8xx
+ : "=r" (ret) : "i" (CPU_FTR_601));
+#else
: "=r" (ret) : "i" (CPU_FTR_601), "i" (SPRN_TBRL));
+#endif
return ret;
#endif
}
#include <linux/ftrace.h>
#include <asm/machdep.h>
+#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <asm/sections.h>
#ifndef CONFIG_NEED_MULTIPLE_NODES
VMCOREINFO_SYMBOL(contig_page_data);
#endif
+#if defined(CONFIG_PPC64) && defined(CONFIG_SPARSEMEM_VMEMMAP)
+ VMCOREINFO_SYMBOL(vmemmap_list);
+ VMCOREINFO_SYMBOL(mmu_vmemmap_psize);
+ VMCOREINFO_SYMBOL(mmu_psize_defs);
+ VMCOREINFO_STRUCT_SIZE(vmemmap_backing);
+ VMCOREINFO_OFFSET(vmemmap_backing, list);
+ VMCOREINFO_OFFSET(vmemmap_backing, phys);
+ VMCOREINFO_OFFSET(vmemmap_backing, virt_addr);
+ VMCOREINFO_STRUCT_SIZE(mmu_psize_def);
+ VMCOREINFO_OFFSET(mmu_psize_def, shift);
+#endif
}
/*
printk(KERN_WARNING "--------%s---------\n", label);
printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n");
list_for_each_entry(tmp_part, &nvram_partitions, partition) {
- printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12s\n",
+ printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12.12s\n",
tmp_part->index, tmp_part->header.signature,
tmp_part->header.checksum, tmp_part->header.length,
tmp_part->header.name);
#endif /* CONFIG_ALTIVEC */
if (copy_fpr_to_user(&frame->mc_fregs, current))
return 1;
+
+ /*
+ * Clear the MSR VSX bit to indicate there is no valid state attached
+ * to this context, except in the specific case below where we set it.
+ */
+ msr &= ~MSR_VSX;
#ifdef CONFIG_VSX
/*
* Copy VSR 0-31 upper half from thread_struct to local
if (copy_vsx_to_user(&frame->mc_vsregs, current))
return 1;
msr |= MSR_VSX;
- } else if (!ctx_has_vsx_region)
- /*
- * With a small context structure we can't hold the VSX
- * registers, hence clear the MSR value to indicate the state
- * was not saved.
- */
- msr &= ~MSR_VSX;
-
-
+ }
#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
/* save spe registers */
flush_fp_to_thread(current);
/* copy fpr regs and fpscr */
err |= copy_fpr_to_user(&sc->fp_regs, current);
+
+ /*
+ * Clear the MSR VSX bit to indicate there is no valid state attached
+ * to this context, except in the specific case below where we set it.
+ */
+ msr &= ~MSR_VSX;
#ifdef CONFIG_VSX
/*
* Copy VSX low doubleword to local buffer for formatting,
lwz r6,(CFG_TB_ORIG_STAMP+4)(r9)
/* Get a stable TB value */
+#ifdef CONFIG_8xx
+2: mftbu r3
+ mftbl r4
+ mftbu r0
+#else
2: mfspr r3, SPRN_TBRU
mfspr r4, SPRN_TBRL
mfspr r0, SPRN_TBRU
+#endif
cmplw cr0,r3,r0
bne- 2b
struct hstate *hstate = hstate_file(vma->vm_file);
unsigned long tsize = huge_page_shift(hstate) - 10;
- __flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr, tsize, 0);
-
+ __flush_tlb_page(vma->vm_mm, vmaddr, tsize, 0);
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
{
#ifdef CONFIG_HUGETLB_PAGE
- if (is_vm_hugetlb_page(vma))
+ if (vma && is_vm_hugetlb_page(vma))
flush_hugetlb_page(vma, vmaddr);
#endif
endmenu
-config CPU_LITTLE_ENDIAN
- bool "Build little endian kernel"
- default n
+choice
+ prompt "Endianness selection"
+ default CPU_BIG_ENDIAN
help
This option selects whether a big endian or little endian kernel will
be built.
+config CPU_BIG_ENDIAN
+ bool "Build big endian kernel"
+ help
+ Build a big endian kernel.
+
+ If unsure, select this option.
+
+config CPU_LITTLE_ENDIAN
+ bool "Build little endian kernel"
+ help
+ Build a little endian kernel.
+
Note that if cross compiling a little endian kernel,
CROSS_COMPILE must point to a toolchain capable of targeting
little endian powerpc.
+
+endchoice
select GENERIC_CPU_DEVICES if !SMP
select GENERIC_FIND_FIRST_BIT
select GENERIC_SMP_IDLE_THREAD
- select GENERIC_TIME_VSYSCALL_OLD
+ select GENERIC_TIME_VSYSCALL
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
select HAVE_ARCH_SECCOMP_FILTER
static char keylen_flag;
struct s390_aes_ctx {
- u8 iv[AES_BLOCK_SIZE];
u8 key[AES_MAX_KEY_SIZE];
long enc;
long dec;
struct s390_xts_ctx {
u8 key[32];
- u8 xts_param[16];
- struct pcc_param pcc;
+ u8 pcc_key[32];
long enc;
long dec;
int key_len;
return aes_set_key(tfm, in_key, key_len);
}
-static int cbc_aes_crypt(struct blkcipher_desc *desc, long func, void *param,
+static int cbc_aes_crypt(struct blkcipher_desc *desc, long func,
struct blkcipher_walk *walk)
{
+ struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
int ret = blkcipher_walk_virt(desc, walk);
unsigned int nbytes = walk->nbytes;
+ struct {
+ u8 iv[AES_BLOCK_SIZE];
+ u8 key[AES_MAX_KEY_SIZE];
+ } param;
if (!nbytes)
goto out;
- memcpy(param, walk->iv, AES_BLOCK_SIZE);
+ memcpy(param.iv, walk->iv, AES_BLOCK_SIZE);
+ memcpy(param.key, sctx->key, sctx->key_len);
do {
/* only use complete blocks */
unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
u8 *out = walk->dst.virt.addr;
u8 *in = walk->src.virt.addr;
- ret = crypt_s390_kmc(func, param, out, in, n);
+ ret = crypt_s390_kmc(func, ¶m, out, in, n);
if (ret < 0 || ret != n)
return -EIO;
nbytes &= AES_BLOCK_SIZE - 1;
ret = blkcipher_walk_done(desc, walk, nbytes);
} while ((nbytes = walk->nbytes));
- memcpy(walk->iv, param, AES_BLOCK_SIZE);
+ memcpy(walk->iv, param.iv, AES_BLOCK_SIZE);
out:
return ret;
return fallback_blk_enc(desc, dst, src, nbytes);
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_aes_crypt(desc, sctx->enc, sctx->iv, &walk);
+ return cbc_aes_crypt(desc, sctx->enc, &walk);
}
static int cbc_aes_decrypt(struct blkcipher_desc *desc,
return fallback_blk_dec(desc, dst, src, nbytes);
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_aes_crypt(desc, sctx->dec, sctx->iv, &walk);
+ return cbc_aes_crypt(desc, sctx->dec, &walk);
}
static struct crypto_alg cbc_aes_alg = {
xts_ctx->enc = KM_XTS_128_ENCRYPT;
xts_ctx->dec = KM_XTS_128_DECRYPT;
memcpy(xts_ctx->key + 16, in_key, 16);
- memcpy(xts_ctx->pcc.key + 16, in_key + 16, 16);
+ memcpy(xts_ctx->pcc_key + 16, in_key + 16, 16);
break;
case 48:
xts_ctx->enc = 0;
xts_ctx->enc = KM_XTS_256_ENCRYPT;
xts_ctx->dec = KM_XTS_256_DECRYPT;
memcpy(xts_ctx->key, in_key, 32);
- memcpy(xts_ctx->pcc.key, in_key + 32, 32);
+ memcpy(xts_ctx->pcc_key, in_key + 32, 32);
break;
default:
*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
unsigned int nbytes = walk->nbytes;
unsigned int n;
u8 *in, *out;
- void *param;
+ struct pcc_param pcc_param;
+ struct {
+ u8 key[32];
+ u8 init[16];
+ } xts_param;
if (!nbytes)
goto out;
- memset(xts_ctx->pcc.block, 0, sizeof(xts_ctx->pcc.block));
- memset(xts_ctx->pcc.bit, 0, sizeof(xts_ctx->pcc.bit));
- memset(xts_ctx->pcc.xts, 0, sizeof(xts_ctx->pcc.xts));
- memcpy(xts_ctx->pcc.tweak, walk->iv, sizeof(xts_ctx->pcc.tweak));
- param = xts_ctx->pcc.key + offset;
- ret = crypt_s390_pcc(func, param);
+ memset(pcc_param.block, 0, sizeof(pcc_param.block));
+ memset(pcc_param.bit, 0, sizeof(pcc_param.bit));
+ memset(pcc_param.xts, 0, sizeof(pcc_param.xts));
+ memcpy(pcc_param.tweak, walk->iv, sizeof(pcc_param.tweak));
+ memcpy(pcc_param.key, xts_ctx->pcc_key, 32);
+ ret = crypt_s390_pcc(func, &pcc_param.key[offset]);
if (ret < 0)
return -EIO;
- memcpy(xts_ctx->xts_param, xts_ctx->pcc.xts, 16);
- param = xts_ctx->key + offset;
+ memcpy(xts_param.key, xts_ctx->key, 32);
+ memcpy(xts_param.init, pcc_param.xts, 16);
do {
/* only use complete blocks */
n = nbytes & ~(AES_BLOCK_SIZE - 1);
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
- ret = crypt_s390_km(func, param, out, in, n);
+ ret = crypt_s390_km(func, &xts_param.key[offset], out, in, n);
if (ret < 0 || ret != n)
return -EIO;
: "memory", "cc");
}
+/*
+ * copy_page uses the mvcl instruction with 0xb0 padding byte in order to
+ * bypass caches when copying a page. Especially when copying huge pages
+ * this keeps L1 and L2 data caches alive.
+ */
static inline void copy_page(void *to, void *from)
{
- if (MACHINE_HAS_MVPG) {
- register unsigned long reg0 asm ("0") = 0;
- asm volatile(
- " mvpg %0,%1"
- : : "a" (to), "a" (from), "d" (reg0)
- : "memory", "cc");
- } else
- asm volatile(
- " mvc 0(256,%0),0(%1)\n"
- " mvc 256(256,%0),256(%1)\n"
- " mvc 512(256,%0),512(%1)\n"
- " mvc 768(256,%0),768(%1)\n"
- " mvc 1024(256,%0),1024(%1)\n"
- " mvc 1280(256,%0),1280(%1)\n"
- " mvc 1536(256,%0),1536(%1)\n"
- " mvc 1792(256,%0),1792(%1)\n"
- " mvc 2048(256,%0),2048(%1)\n"
- " mvc 2304(256,%0),2304(%1)\n"
- " mvc 2560(256,%0),2560(%1)\n"
- " mvc 2816(256,%0),2816(%1)\n"
- " mvc 3072(256,%0),3072(%1)\n"
- " mvc 3328(256,%0),3328(%1)\n"
- " mvc 3584(256,%0),3584(%1)\n"
- " mvc 3840(256,%0),3840(%1)\n"
- : : "a" (to), "a" (from) : "memory");
+ register void *reg2 asm ("2") = to;
+ register unsigned long reg3 asm ("3") = 0x1000;
+ register void *reg4 asm ("4") = from;
+ register unsigned long reg5 asm ("5") = 0xb0001000;
+ asm volatile(
+ " mvcl 2,4"
+ : "+d" (reg2), "+d" (reg3), "+d" (reg4), "+d" (reg5)
+ : : "memory", "cc");
}
#define clear_user_page(page, vaddr, pg) clear_page(page)
__u64 wtom_clock_nsec; /* 0x28 */
__u32 tz_minuteswest; /* Minutes west of Greenwich 0x30 */
__u32 tz_dsttime; /* Type of dst correction 0x34 */
- __u32 ectg_available;
- __u32 ntp_mult; /* NTP adjusted multiplier 0x3C */
+ __u32 ectg_available; /* ECTG instruction present 0x38 */
+ __u32 tk_mult; /* Mult. used for xtime_nsec 0x3c */
+ __u32 tk_shift; /* Shift used for xtime_nsec 0x40 */
};
struct vdso_per_cpu_data {
DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest));
DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available));
- DEFINE(__VDSO_NTP_MULT, offsetof(struct vdso_data, ntp_mult));
+ DEFINE(__VDSO_TK_MULT, offsetof(struct vdso_data, tk_mult));
+ DEFINE(__VDSO_TK_SHIFT, offsetof(struct vdso_data, tk_shift));
DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base));
DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time));
/* constants used by the vdso */
return -EINVAL;
/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
- regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
+ regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_USER) << 32 |
(__u64)(user_sregs.regs.psw.mask & PSW32_MASK_RI) << 32 |
(__u64)(user_sregs.regs.psw.addr & PSW32_ADDR_AMODE);
PGM_CHECK_DEFAULT /* 35 */
PGM_CHECK_DEFAULT /* 36 */
PGM_CHECK_DEFAULT /* 37 */
-PGM_CHECK_DEFAULT /* 38 */
+PGM_CHECK_64BIT(do_dat_exception) /* 38 */
PGM_CHECK_64BIT(do_dat_exception) /* 39 */
PGM_CHECK_64BIT(do_dat_exception) /* 3a */
PGM_CHECK_64BIT(do_dat_exception) /* 3b */
return -EINVAL;
/* Use regs->psw.mask instead of PSW_USER_BITS to preserve PER bit. */
- regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
+ regs->psw.mask = (regs->psw.mask & ~(PSW_MASK_USER | PSW_MASK_RI)) |
(user_sregs.regs.psw.mask & (PSW_MASK_USER | PSW_MASK_RI));
/* Check for invalid user address space control. */
if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_HOME)
set_clock_comparator(S390_lowcore.clock_comparator);
}
-static int s390_next_ktime(ktime_t expires,
+static int s390_next_event(unsigned long delta,
struct clock_event_device *evt)
{
- struct timespec ts;
- u64 nsecs;
-
- ts.tv_sec = ts.tv_nsec = 0;
- monotonic_to_bootbased(&ts);
- nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
- do_div(nsecs, 125);
- S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
- /* Program the maximum value if we have an overflow (== year 2042) */
- if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc))
- S390_lowcore.clock_comparator = -1ULL;
+ S390_lowcore.clock_comparator = get_tod_clock() + delta;
set_clock_comparator(S390_lowcore.clock_comparator);
return 0;
}
cpu = smp_processor_id();
cd = &per_cpu(comparators, cpu);
cd->name = "comparator";
- cd->features = CLOCK_EVT_FEAT_ONESHOT |
- CLOCK_EVT_FEAT_KTIME;
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
cd->mult = 16777;
cd->shift = 12;
cd->min_delta_ns = 1;
cd->max_delta_ns = LONG_MAX;
cd->rating = 400;
cd->cpumask = cpumask_of(cpu);
- cd->set_next_ktime = s390_next_ktime;
+ cd->set_next_event = s390_next_event;
cd->set_mode = s390_set_mode;
clockevents_register_device(cd);
return &clocksource_tod;
}
-void update_vsyscall_old(struct timespec *wall_time, struct timespec *wtm,
- struct clocksource *clock, u32 mult)
+void update_vsyscall(struct timekeeper *tk)
{
- if (clock != &clocksource_tod)
+ u64 nsecps;
+
+ if (tk->clock != &clocksource_tod)
return;
/* Make userspace gettimeofday spin until we're done. */
++vdso_data->tb_update_count;
smp_wmb();
- vdso_data->xtime_tod_stamp = clock->cycle_last;
- vdso_data->xtime_clock_sec = wall_time->tv_sec;
- vdso_data->xtime_clock_nsec = wall_time->tv_nsec;
- vdso_data->wtom_clock_sec = wtm->tv_sec;
- vdso_data->wtom_clock_nsec = wtm->tv_nsec;
- vdso_data->ntp_mult = mult;
+ vdso_data->xtime_tod_stamp = tk->clock->cycle_last;
+ vdso_data->xtime_clock_sec = tk->xtime_sec;
+ vdso_data->xtime_clock_nsec = tk->xtime_nsec;
+ vdso_data->wtom_clock_sec =
+ tk->xtime_sec + tk->wall_to_monotonic.tv_sec;
+ vdso_data->wtom_clock_nsec = tk->xtime_nsec +
+ + (tk->wall_to_monotonic.tv_nsec << tk->shift);
+ nsecps = (u64) NSEC_PER_SEC << tk->shift;
+ while (vdso_data->wtom_clock_nsec >= nsecps) {
+ vdso_data->wtom_clock_nsec -= nsecps;
+ vdso_data->wtom_clock_sec++;
+ }
+ vdso_data->tk_mult = tk->mult;
+ vdso_data->tk_shift = tk->shift;
smp_wmb();
++vdso_data->tb_update_count;
}
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,2f
ahi %r0,-1
-2: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
+2: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */
lr %r2,%r0
- l %r0,__VDSO_NTP_MULT(%r5)
+ l %r0,__VDSO_TK_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 3f
- a %r0,__VDSO_NTP_MULT(%r5)
+ a %r0,__VDSO_TK_MULT(%r5)
3: alr %r0,%r2
- srdl %r0,12
- al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
+ al %r0,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
al %r1,__VDSO_XTIME_NSEC+4(%r5)
brc 12,4f
ahi %r0,1
-4: l %r2,__VDSO_XTIME_SEC+4(%r5)
- al %r0,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic */
+4: al %r0,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic.nsec */
al %r1,__VDSO_WTOM_NSEC+4(%r5)
brc 12,5f
ahi %r0,1
-5: al %r2,__VDSO_WTOM_SEC+4(%r5)
+5: l %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
+ srdl %r0,0(%r2) /* >> tk->shift */
+ l %r2,__VDSO_XTIME_SEC+4(%r5)
+ al %r2,__VDSO_WTOM_SEC+4(%r5)
cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */
jne 1b
basr %r5,0
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,12f
ahi %r0,-1
-12: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
+12: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */
lr %r2,%r0
- l %r0,__VDSO_NTP_MULT(%r5)
+ l %r0,__VDSO_TK_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 13f
- a %r0,__VDSO_NTP_MULT(%r5)
+ a %r0,__VDSO_TK_MULT(%r5)
13: alr %r0,%r2
- srdl %r0,12
- al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
+ al %r0,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
al %r1,__VDSO_XTIME_NSEC+4(%r5)
brc 12,14f
ahi %r0,1
-14: l %r2,__VDSO_XTIME_SEC+4(%r5)
+14: l %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
+ srdl %r0,0(%r2) /* >> tk->shift */
+ l %r2,__VDSO_XTIME_SEC+4(%r5)
cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */
jne 11b
basr %r5,0
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,3f
ahi %r0,-1
-3: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
+3: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */
st %r0,24(%r15)
- l %r0,__VDSO_NTP_MULT(%r5)
+ l %r0,__VDSO_TK_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 4f
- a %r0,__VDSO_NTP_MULT(%r5)
+ a %r0,__VDSO_TK_MULT(%r5)
4: al %r0,24(%r15)
- srdl %r0,12
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
al %r1,__VDSO_XTIME_NSEC+4(%r5)
brc 12,5f
5: mvc 24(4,%r15),__VDSO_XTIME_SEC+4(%r5)
cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */
jne 1b
+ l %r4,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
+ srdl %r0,0(%r4) /* >> tk->shift */
l %r4,24(%r15) /* get tv_sec from stack */
basr %r5,0
6: ltr %r0,%r0
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
stck 48(%r15) /* Store TOD clock */
+ lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
+ lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */
+ alg %r0,__VDSO_WTOM_SEC(%r5) /* + wall_to_monotonic.sec */
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
- srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
- alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */
- lg %r0,__VDSO_XTIME_SEC(%r5)
- alg %r1,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic */
- alg %r0,__VDSO_WTOM_SEC(%r5)
+ msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
+ alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
+ alg %r1,__VDSO_WTOM_NSEC(%r5) /* + wall_to_monotonic.nsec */
+ srlg %r1,%r1,0(%r2) /* >> tk->shift */
clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */
jne 0b
larl %r5,13f
tmll %r4,0x0001 /* pending update ? loop */
jnz 5b
stck 48(%r15) /* Store TOD clock */
+ lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
- srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
- alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */
- lg %r0,__VDSO_XTIME_SEC(%r5)
+ msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
+ alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
+ srlg %r1,%r1,0(%r2) /* >> tk->shift */
+ lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */
clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */
jne 5b
larl %r5,13f
stck 48(%r15) /* Store TOD clock */
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
- srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
- alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime.tv_nsec */
- lg %r0,__VDSO_XTIME_SEC(%r5) /* xtime.tv_sec */
+ msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
+ alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
+ lg %r0,__VDSO_XTIME_SEC(%r5) /* tk->xtime_sec */
clg %r4,__VDSO_UPD_COUNT(%r5) /* check update counter */
jne 0b
+ lgf %r5,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
+ srlg %r1,%r1,0(%r5) /* >> tk->shift */
larl %r5,5f
2: clg %r1,0(%r5)
jl 3f
* contains the (negative) exception code.
*/
#ifdef CONFIG_64BIT
+
static unsigned long follow_table(struct mm_struct *mm,
unsigned long address, int write)
{
unsigned long *table = (unsigned long *)__pa(mm->pgd);
+ if (unlikely(address > mm->context.asce_limit - 1))
+ return -0x38UL;
switch (mm->context.asce_bits & _ASCE_TYPE_MASK) {
case _ASCE_TYPE_REGION1:
table = table + ((address >> 53) & 0x7ff);
HEADER_ARCH := $(SUBARCH)
-# Additional ARCH settings for x86
-ifeq ($(SUBARCH),i386)
- HEADER_ARCH := x86
+ifneq ($(filter $(SUBARCH),x86 x86_64 i386),)
+ HEADER_ARCH := x86
endif
-ifeq ($(SUBARCH),x86_64)
- HEADER_ARCH := x86
+
+ifdef CONFIG_64BIT
KBUILD_CFLAGS += -mcmodel=large
endif
unsigned long return_address;
};
-static void print_stack_trace(unsigned long *sp, unsigned long bp)
+static void do_stack_trace(unsigned long *sp, unsigned long bp)
{
int reliable;
unsigned long addr;
}
printk(KERN_CONT "\n");
- print_stack_trace(sp, bp);
+ do_stack_trace(sp, bp);
}
KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
+ # Don't autogenerate SSE instructions
+ KBUILD_CFLAGS += -mno-sse
+
# Never want PIC in a 32-bit kernel, prevent breakage with GCC built
# with nonstandard options
KBUILD_CFLAGS += -fno-pic
KBUILD_AFLAGS += -m64
KBUILD_CFLAGS += -m64
+ # Don't autogenerate SSE instructions
+ KBUILD_CFLAGS += -mno-sse
+
# Use -mpreferred-stack-boundary=3 if supported.
- KBUILD_CFLAGS += $(call cc-option,-mno-sse -mpreferred-stack-boundary=3)
+ KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3)
# FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
#
avx_supported := $(call as-instr,vpxor %xmm0$(comma)%xmm0$(comma)%xmm0,yes,no)
+avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\
+ $(comma)4)$(comma)%ymm2,yes,no)
-obj-$(CONFIG_CRYPTO_ABLK_HELPER_X86) += ablk_helper.o
obj-$(CONFIG_CRYPTO_GLUE_HELPER_X86) += glue_helper.o
obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
+++ /dev/null
-/*
- * Shared async block cipher helpers
- *
- * Copyright (c) 2012 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
- *
- * Based on aesni-intel_glue.c by:
- * Copyright (C) 2008, Intel Corp.
- * Author: Huang Ying <ying.huang@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/crypto.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <crypto/algapi.h>
-#include <crypto/cryptd.h>
-#include <asm/i387.h>
-#include <asm/crypto/ablk_helper.h>
-
-int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
- unsigned int key_len)
-{
- struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
- struct crypto_ablkcipher *child = &ctx->cryptd_tfm->base;
- int err;
-
- crypto_ablkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
- crypto_ablkcipher_set_flags(child, crypto_ablkcipher_get_flags(tfm)
- & CRYPTO_TFM_REQ_MASK);
- err = crypto_ablkcipher_setkey(child, key, key_len);
- crypto_ablkcipher_set_flags(tfm, crypto_ablkcipher_get_flags(child)
- & CRYPTO_TFM_RES_MASK);
- return err;
-}
-EXPORT_SYMBOL_GPL(ablk_set_key);
-
-int __ablk_encrypt(struct ablkcipher_request *req)
-{
- struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
- struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
- struct blkcipher_desc desc;
-
- desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm);
- desc.info = req->info;
- desc.flags = 0;
-
- return crypto_blkcipher_crt(desc.tfm)->encrypt(
- &desc, req->dst, req->src, req->nbytes);
-}
-EXPORT_SYMBOL_GPL(__ablk_encrypt);
-
-int ablk_encrypt(struct ablkcipher_request *req)
-{
- struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
- struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
-
- if (!irq_fpu_usable()) {
- struct ablkcipher_request *cryptd_req =
- ablkcipher_request_ctx(req);
-
- memcpy(cryptd_req, req, sizeof(*req));
- ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
-
- return crypto_ablkcipher_encrypt(cryptd_req);
- } else {
- return __ablk_encrypt(req);
- }
-}
-EXPORT_SYMBOL_GPL(ablk_encrypt);
-
-int ablk_decrypt(struct ablkcipher_request *req)
-{
- struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
- struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
-
- if (!irq_fpu_usable()) {
- struct ablkcipher_request *cryptd_req =
- ablkcipher_request_ctx(req);
-
- memcpy(cryptd_req, req, sizeof(*req));
- ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
-
- return crypto_ablkcipher_decrypt(cryptd_req);
- } else {
- struct blkcipher_desc desc;
-
- desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm);
- desc.info = req->info;
- desc.flags = 0;
-
- return crypto_blkcipher_crt(desc.tfm)->decrypt(
- &desc, req->dst, req->src, req->nbytes);
- }
-}
-EXPORT_SYMBOL_GPL(ablk_decrypt);
-
-void ablk_exit(struct crypto_tfm *tfm)
-{
- struct async_helper_ctx *ctx = crypto_tfm_ctx(tfm);
-
- cryptd_free_ablkcipher(ctx->cryptd_tfm);
-}
-EXPORT_SYMBOL_GPL(ablk_exit);
-
-int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name)
-{
- struct async_helper_ctx *ctx = crypto_tfm_ctx(tfm);
- struct cryptd_ablkcipher *cryptd_tfm;
-
- cryptd_tfm = cryptd_alloc_ablkcipher(drv_name, 0, 0);
- if (IS_ERR(cryptd_tfm))
- return PTR_ERR(cryptd_tfm);
-
- ctx->cryptd_tfm = cryptd_tfm;
- tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request) +
- crypto_ablkcipher_reqsize(&cryptd_tfm->base);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ablk_init_common);
-
-int ablk_init(struct crypto_tfm *tfm)
-{
- char drv_name[CRYPTO_MAX_ALG_NAME];
-
- snprintf(drv_name, sizeof(drv_name), "__driver-%s",
- crypto_tfm_alg_driver_name(tfm));
-
- return ablk_init_common(tfm, drv_name);
-}
-EXPORT_SYMBOL_GPL(ablk_init);
-
-MODULE_LICENSE("GPL");
#include <asm/cpu_device_id.h>
#include <asm/i387.h>
#include <asm/crypto/aes.h>
-#include <asm/crypto/ablk_helper.h>
+#include <crypto/ablk_helper.h>
#include <crypto/scatterwalk.h>
#include <crypto/internal/aead.h>
#include <linux/workqueue.h>
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/ctr.h>
#include <crypto/lrw.h>
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/camellia.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAMELLIA_AESNI_PARALLEL_BLOCKS 16
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/ctr.h>
#include <crypto/lrw.h>
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/camellia.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAMELLIA_AESNI_PARALLEL_BLOCKS 16
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/cast5.h>
#include <crypto/cryptd.h>
#include <crypto/ctr.h>
#include <asm/xcr.h>
#include <asm/xsave.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAST5_PARALLEL_BLOCKS 16
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/cast6.h>
#include <crypto/cryptd.h>
#include <crypto/xts.h>
#include <asm/xcr.h>
#include <asm/xsave.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define CAST6_PARALLEL_BLOCKS 8
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/ctr.h>
#include <crypto/lrw.h>
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/serpent-avx.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#define SERPENT_AVX2_PARALLEL_BLOCKS 16
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/serpent.h>
#include <crypto/cryptd.h>
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/serpent-avx.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
/* 8-way parallel cipher functions */
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/serpent.h>
#include <crypto/cryptd.h>
#include <crypto/lrw.h>
#include <crypto/xts.h>
#include <asm/crypto/serpent-sse2.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
static void serpent_decrypt_cbc_xway(void *ctx, u128 *dst, const u128 *src)
/* allow AVX to override SSSE3, it's a little faster */
if (avx_usable()) {
#ifdef CONFIG_AS_AVX2
- if (boot_cpu_has(X86_FEATURE_AVX2))
+ if (boot_cpu_has(X86_FEATURE_AVX2) && boot_cpu_has(X86_FEATURE_BMI2))
sha256_transform_asm = sha256_transform_rorx;
else
#endif
MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm, Supplemental SSE3 accelerated");
MODULE_ALIAS("sha256");
-MODULE_ALIAS("sha384");
+MODULE_ALIAS("sha224");
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
+#include <crypto/ablk_helper.h>
#include <crypto/algapi.h>
#include <crypto/twofish.h>
#include <crypto/cryptd.h>
#include <asm/xcr.h>
#include <asm/xsave.h>
#include <asm/crypto/twofish.h>
-#include <asm/crypto/ablk_helper.h>
#include <asm/crypto/glue_helper.h>
#include <crypto/scatterwalk.h>
#include <linux/workqueue.h>
*/
static inline int atomic_sub_and_test(int i, atomic_t *v)
{
- GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, i, "%0", "e");
+ GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, "er", i, "%0", "e");
}
/**
*/
static inline int atomic_add_negative(int i, atomic_t *v)
{
- GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, i, "%0", "s");
+ GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, "er", i, "%0", "s");
}
/**
*/
static inline int atomic64_sub_and_test(long i, atomic64_t *v)
{
- GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, i, "%0", "e");
+ GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, "er", i, "%0", "e");
}
/**
*/
static inline int atomic64_add_negative(long i, atomic64_t *v)
{
- GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, i, "%0", "s");
+ GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, "er", i, "%0", "s");
}
/**
*/
static inline int test_and_set_bit(long nr, volatile unsigned long *addr)
{
- GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, nr, "%0", "c");
+ GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, "Ir", nr, "%0", "c");
}
/**
*/
static inline int test_and_clear_bit(long nr, volatile unsigned long *addr)
{
- GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, nr, "%0", "c");
+ GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, "Ir", nr, "%0", "c");
}
/**
*/
static inline int test_and_change_bit(long nr, volatile unsigned long *addr)
{
- GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, nr, "%0", "c");
+ GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, "Ir", nr, "%0", "c");
}
static __always_inline int constant_test_bit(long nr, const volatile unsigned long *addr)
+++ /dev/null
-/*
- * Shared async block cipher helpers
- */
-
-#ifndef _CRYPTO_ABLK_HELPER_H
-#define _CRYPTO_ABLK_HELPER_H
-
-#include <linux/crypto.h>
-#include <linux/kernel.h>
-#include <crypto/cryptd.h>
-
-struct async_helper_ctx {
- struct cryptd_ablkcipher *cryptd_tfm;
-};
-
-extern int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
- unsigned int key_len);
-
-extern int __ablk_encrypt(struct ablkcipher_request *req);
-
-extern int ablk_encrypt(struct ablkcipher_request *req);
-
-extern int ablk_decrypt(struct ablkcipher_request *req);
-
-extern void ablk_exit(struct crypto_tfm *tfm);
-
-extern int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name);
-
-extern int ablk_init(struct crypto_tfm *tfm);
-
-#endif /* _CRYPTO_ABLK_HELPER_H */
*/
static inline int local_sub_and_test(long i, local_t *l)
{
- GEN_BINARY_RMWcc(_ASM_SUB, l->a.counter, i, "%0", "e");
+ GEN_BINARY_RMWcc(_ASM_SUB, l->a.counter, "er", i, "%0", "e");
}
/**
*/
static inline int local_add_negative(long i, local_t *l)
{
- GEN_BINARY_RMWcc(_ASM_ADD, l->a.counter, i, "%0", "s");
+ GEN_BINARY_RMWcc(_ASM_ADD, l->a.counter, "er", i, "%0", "s");
}
/**
#define GEN_UNARY_RMWcc(op, var, arg0, cc) \
__GEN_RMWcc(op " " arg0, var, cc)
-#define GEN_BINARY_RMWcc(op, var, val, arg0, cc) \
- __GEN_RMWcc(op " %1, " arg0, var, cc, "er" (val))
+#define GEN_BINARY_RMWcc(op, var, vcon, val, arg0, cc) \
+ __GEN_RMWcc(op " %1, " arg0, var, cc, vcon (val))
#else /* !CC_HAVE_ASM_GOTO */
#define GEN_UNARY_RMWcc(op, var, arg0, cc) \
__GEN_RMWcc(op " " arg0, var, cc)
-#define GEN_BINARY_RMWcc(op, var, val, arg0, cc) \
- __GEN_RMWcc(op " %2, " arg0, var, cc, "er" (val))
+#define GEN_BINARY_RMWcc(op, var, vcon, val, arg0, cc) \
+ __GEN_RMWcc(op " %2, " arg0, var, cc, vcon (val))
#endif /* CC_HAVE_ASM_GOTO */
--- /dev/null
+
+#include <asm/i387.h>
+
+/*
+ * may_use_simd - whether it is allowable at this time to issue SIMD
+ * instructions or access the SIMD register file
+ */
+static __must_check inline bool may_use_simd(void)
+{
+ return irq_fpu_usable();
+}
*/
DEFINE_IRQ_VECTOR_EVENT(irq_work);
+/*
+ * We must dis-allow sampling irq_work_exit() because perf event sampling
+ * itself can cause irq_work, which would lead to an infinite loop;
+ *
+ * 1) irq_work_exit happens
+ * 2) generates perf sample
+ * 3) generates irq_work
+ * 4) goto 1
+ */
+TRACE_EVENT_PERF_PERM(irq_work_exit, is_sampling_event(p_event) ? -EPERM : 0);
+
/*
* call_function - called when entering/exiting a call function interrupt
* vector handler
{
/* Stop the cpus and apics */
#ifdef CONFIG_X86_IO_APIC
+ /*
+ * Disabling IO APIC before local APIC is a workaround for
+ * erratum AVR31 in "Intel Atom Processor C2000 Product Family
+ * Specification Update". In this situation, interrupts that target
+ * a Logical Processor whose Local APIC is either in the process of
+ * being hardware disabled or software disabled are neither delivered
+ * nor discarded. When this erratum occurs, the processor may hang.
+ *
+ * Even without the erratum, it still makes sense to quiet IO APIC
+ * before disabling Local APIC.
+ */
disable_IO_APIC();
#endif
efi_y += font->height;
}
- if (efi_y + font->height >= si->lfb_height) {
+ if (efi_y + font->height > si->lfb_height) {
u32 i;
efi_y -= font->height;
uint64_t v;
do {
- start = u64_stats_fetch_begin(&stat->syncp);
+ start = u64_stats_fetch_begin_bh(&stat->syncp);
v = stat->cnt;
- } while (u64_stats_fetch_retry(&stat->syncp, start));
+ } while (u64_stats_fetch_retry_bh(&stat->syncp, start));
return v;
}
struct blkg_rwstat tmp;
do {
- start = u64_stats_fetch_begin(&rwstat->syncp);
+ start = u64_stats_fetch_begin_bh(&rwstat->syncp);
tmp = *rwstat;
- } while (u64_stats_fetch_retry(&rwstat->syncp, start));
+ } while (u64_stats_fetch_retry_bh(&rwstat->syncp, start));
return tmp;
}
}
}
-static void bio_end_flush(struct bio *bio, int err)
-{
- if (err)
- clear_bit(BIO_UPTODATE, &bio->bi_flags);
- if (bio->bi_private)
- complete(bio->bi_private);
- bio_put(bio);
-}
-
/**
* blkdev_issue_flush - queue a flush
* @bdev: blockdev to issue flush for
int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
sector_t *error_sector)
{
- DECLARE_COMPLETION_ONSTACK(wait);
struct request_queue *q;
struct bio *bio;
int ret = 0;
return -ENXIO;
bio = bio_alloc(gfp_mask, 0);
- bio->bi_end_io = bio_end_flush;
bio->bi_bdev = bdev;
- bio->bi_private = &wait;
- bio_get(bio);
- submit_bio(WRITE_FLUSH, bio);
- wait_for_completion_io(&wait);
+ ret = submit_bio_wait(WRITE_FLUSH, bio);
/*
* The driver must store the error location in ->bi_sector, if
if (error_sector)
*error_sector = bio->bi_sector;
- if (!bio_flagged(bio, BIO_UPTODATE))
- ret = -EIO;
-
bio_put(bio);
return ret;
}
if (rq) {
blk_mq_rq_ctx_init(q, ctx, rq, rw);
break;
- } else if (!(gfp & __GFP_WAIT))
- break;
+ }
blk_mq_put_ctx(ctx);
+ if (!(gfp & __GFP_WAIT))
+ break;
+
__blk_mq_run_hw_queue(hctx);
blk_mq_wait_for_tags(hctx->tags);
} while (1);
return NULL;
rq = blk_mq_alloc_request_pinned(q, rw, gfp, reserved);
- blk_mq_put_ctx(rq->mq_ctx);
+ if (rq)
+ blk_mq_put_ctx(rq->mq_ctx);
return rq;
}
return NULL;
rq = blk_mq_alloc_request_pinned(q, rw, gfp, true);
- blk_mq_put_ctx(rq->mq_ctx);
+ if (rq)
+ blk_mq_put_ctx(rq->mq_ctx);
return rq;
}
EXPORT_SYMBOL(blk_mq_alloc_reserved_request);
blk_account_io_completion(rq, bytes);
+ blk_account_io_done(rq);
+
if (rq->end_io)
rq->end_io(rq, error);
else
blk_mq_free_request(rq);
-
- blk_account_io_done(rq);
}
void __blk_mq_end_io(struct request *rq, int error)
help
Quick & dirty crypto test module.
-config CRYPTO_ABLK_HELPER_X86
+config CRYPTO_ABLK_HELPER
tristate
- depends on X86
select CRYPTO_CRYPTD
config CRYPTO_GLUE_HELPER_X86
select CRYPTO_AES_X86_64 if 64BIT
select CRYPTO_AES_586 if !64BIT
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_ALGAPI
select CRYPTO_GLUE_HELPER_X86 if 64BIT
select CRYPTO_LRW
depends on CRYPTO
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_CAMELLIA_X86_64
select CRYPTO_LRW
depends on CRYPTO
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_CAMELLIA_X86_64
select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_CAST_COMMON
select CRYPTO_CAST5
help
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_CAST_COMMON
select CRYPTO_CAST6
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_LRW
depends on X86 && !64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_LRW
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_LRW
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_SERPENT
select CRYPTO_SERPENT_AVX_X86_64
depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_CRYPTD
- select CRYPTO_ABLK_HELPER_X86
+ select CRYPTO_ABLK_HELPER
select CRYPTO_GLUE_HELPER_X86
select CRYPTO_TWOFISH_COMMON
select CRYPTO_TWOFISH_X86_64
# Cryptographic API
#
+# memneq MUST be built with -Os or -O0 to prevent early-return optimizations
+# that will defeat memneq's actual purpose to prevent timing attacks.
+CFLAGS_REMOVE_memneq.o := -O1 -O2 -O3
+CFLAGS_memneq.o := -Os
+
obj-$(CONFIG_CRYPTO) += crypto.o
-crypto-y := api.o cipher.o compress.o
+crypto-y := api.o cipher.o compress.o memneq.o
obj-$(CONFIG_CRYPTO_WORKQUEUE) += crypto_wq.o
obj-$(CONFIG_ASYNC_CORE) += async_tx/
obj-$(CONFIG_ASYMMETRIC_KEY_TYPE) += asymmetric_keys/
obj-$(CONFIG_CRYPTO_HASH_INFO) += hash_info.o
+obj-$(CONFIG_CRYPTO_ABLK_HELPER) += ablk_helper.o
--- /dev/null
+/*
+ * Shared async block cipher helpers
+ *
+ * Copyright (c) 2012 Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+ *
+ * Based on aesni-intel_glue.c by:
+ * Copyright (C) 2008, Intel Corp.
+ * Author: Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/crypto.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/hardirq.h>
+#include <crypto/algapi.h>
+#include <crypto/cryptd.h>
+#include <crypto/ablk_helper.h>
+#include <asm/simd.h>
+
+int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int key_len)
+{
+ struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+ struct crypto_ablkcipher *child = &ctx->cryptd_tfm->base;
+ int err;
+
+ crypto_ablkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK);
+ crypto_ablkcipher_set_flags(child, crypto_ablkcipher_get_flags(tfm)
+ & CRYPTO_TFM_REQ_MASK);
+ err = crypto_ablkcipher_setkey(child, key, key_len);
+ crypto_ablkcipher_set_flags(tfm, crypto_ablkcipher_get_flags(child)
+ & CRYPTO_TFM_RES_MASK);
+ return err;
+}
+EXPORT_SYMBOL_GPL(ablk_set_key);
+
+int __ablk_encrypt(struct ablkcipher_request *req)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
+ struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+ struct blkcipher_desc desc;
+
+ desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm);
+ desc.info = req->info;
+ desc.flags = 0;
+
+ return crypto_blkcipher_crt(desc.tfm)->encrypt(
+ &desc, req->dst, req->src, req->nbytes);
+}
+EXPORT_SYMBOL_GPL(__ablk_encrypt);
+
+int ablk_encrypt(struct ablkcipher_request *req)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
+ struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+
+ if (!may_use_simd()) {
+ struct ablkcipher_request *cryptd_req =
+ ablkcipher_request_ctx(req);
+
+ *cryptd_req = *req;
+ ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
+
+ return crypto_ablkcipher_encrypt(cryptd_req);
+ } else {
+ return __ablk_encrypt(req);
+ }
+}
+EXPORT_SYMBOL_GPL(ablk_encrypt);
+
+int ablk_decrypt(struct ablkcipher_request *req)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
+ struct async_helper_ctx *ctx = crypto_ablkcipher_ctx(tfm);
+
+ if (!may_use_simd()) {
+ struct ablkcipher_request *cryptd_req =
+ ablkcipher_request_ctx(req);
+
+ *cryptd_req = *req;
+ ablkcipher_request_set_tfm(cryptd_req, &ctx->cryptd_tfm->base);
+
+ return crypto_ablkcipher_decrypt(cryptd_req);
+ } else {
+ struct blkcipher_desc desc;
+
+ desc.tfm = cryptd_ablkcipher_child(ctx->cryptd_tfm);
+ desc.info = req->info;
+ desc.flags = 0;
+
+ return crypto_blkcipher_crt(desc.tfm)->decrypt(
+ &desc, req->dst, req->src, req->nbytes);
+ }
+}
+EXPORT_SYMBOL_GPL(ablk_decrypt);
+
+void ablk_exit(struct crypto_tfm *tfm)
+{
+ struct async_helper_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ cryptd_free_ablkcipher(ctx->cryptd_tfm);
+}
+EXPORT_SYMBOL_GPL(ablk_exit);
+
+int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name)
+{
+ struct async_helper_ctx *ctx = crypto_tfm_ctx(tfm);
+ struct cryptd_ablkcipher *cryptd_tfm;
+
+ cryptd_tfm = cryptd_alloc_ablkcipher(drv_name, 0, 0);
+ if (IS_ERR(cryptd_tfm))
+ return PTR_ERR(cryptd_tfm);
+
+ ctx->cryptd_tfm = cryptd_tfm;
+ tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request) +
+ crypto_ablkcipher_reqsize(&cryptd_tfm->base);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ablk_init_common);
+
+int ablk_init(struct crypto_tfm *tfm)
+{
+ char drv_name[CRYPTO_MAX_ALG_NAME];
+
+ snprintf(drv_name, sizeof(drv_name), "__driver-%s",
+ crypto_tfm_alg_driver_name(tfm));
+
+ return ablk_init_common(tfm, drv_name);
+}
+EXPORT_SYMBOL_GPL(ablk_init);
+
+MODULE_LICENSE("GPL");
#include <crypto/internal/skcipher.h>
#include <linux/cpumask.h>
#include <linux/err.h>
-#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/rtnetlink.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include "internal.h"
-static const char *skcipher_default_geniv __read_mostly;
-
struct ablkcipher_buffer {
struct list_head entry;
struct scatter_walk dst;
alg->cra_blocksize)
return "chainiv";
- return alg->cra_flags & CRYPTO_ALG_ASYNC ?
- "eseqiv" : skcipher_default_geniv;
+ return "eseqiv";
}
static int crypto_givcipher_default(struct crypto_alg *alg, u32 type, u32 mask)
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(crypto_alloc_ablkcipher);
-
-static int __init skcipher_module_init(void)
-{
- skcipher_default_geniv = num_possible_cpus() > 1 ?
- "eseqiv" : "chainiv";
- return 0;
-}
-
-static void skcipher_module_exit(void)
-{
-}
-
-module_init(skcipher_module_init);
-module_exit(skcipher_module_exit);
struct hash_ctx *ctx = ask->private;
int err;
+ if (flags & MSG_SENDPAGE_NOTLAST)
+ flags |= MSG_MORE;
+
lock_sock(sk);
sg_init_table(ctx->sgl.sg, 1);
sg_set_page(ctx->sgl.sg, page, size, offset);
struct skcipher_sg_list *sgl;
int err = -EINVAL;
+ if (flags & MSG_SENDPAGE_NOTLAST)
+ flags |= MSG_MORE;
+
lock_sock(sk);
if (!ctx->more && ctx->used)
goto unlock;
*/
if (byte_count < DEFAULT_BLK_SZ) {
empty_rbuf:
- for (; ctx->rand_data_valid < DEFAULT_BLK_SZ;
- ctx->rand_data_valid++) {
+ while (ctx->rand_data_valid < DEFAULT_BLK_SZ) {
*ptr = ctx->rand_data[ctx->rand_data_valid];
ptr++;
byte_count--;
+ ctx->rand_data_valid++;
if (byte_count == 0)
goto done;
}
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
+#include <crypto/algapi.h>
#include "public_key.h"
MODULE_LICENSE("GPL");
}
}
- if (memcmp(asn1_template, EM + T_offset, asn1_size) != 0) {
+ if (crypto_memneq(asn1_template, EM + T_offset, asn1_size) != 0) {
kleave(" = -EBADMSG [EM[T] ASN.1 mismatch]");
return -EBADMSG;
}
- if (memcmp(H, EM + T_offset + asn1_size, hash_size) != 0) {
+ if (crypto_memneq(H, EM + T_offset + asn1_size, hash_size) != 0) {
kleave(" = -EKEYREJECTED [EM[T] hash mismatch]");
return -EKEYREJECTED;
}
#include <linux/asn1_decoder.h>
#include <keys/asymmetric-subtype.h>
#include <keys/asymmetric-parser.h>
-#include <keys/system_keyring.h>
#include <crypto/hash.h>
#include "asymmetric_keys.h"
#include "public_key.h"
#include "x509_parser.h"
-/*
- * Find a key in the given keyring by issuer and authority.
- */
-static struct key *x509_request_asymmetric_key(
- struct key *keyring,
- const char *signer, size_t signer_len,
- const char *authority, size_t auth_len)
-{
- key_ref_t key;
- char *id;
-
- /* Construct an identifier. */
- id = kmalloc(signer_len + 2 + auth_len + 1, GFP_KERNEL);
- if (!id)
- return ERR_PTR(-ENOMEM);
-
- memcpy(id, signer, signer_len);
- id[signer_len + 0] = ':';
- id[signer_len + 1] = ' ';
- memcpy(id + signer_len + 2, authority, auth_len);
- id[signer_len + 2 + auth_len] = 0;
-
- pr_debug("Look up: \"%s\"\n", id);
-
- key = keyring_search(make_key_ref(keyring, 1),
- &key_type_asymmetric, id);
- if (IS_ERR(key))
- pr_debug("Request for module key '%s' err %ld\n",
- id, PTR_ERR(key));
- kfree(id);
-
- if (IS_ERR(key)) {
- switch (PTR_ERR(key)) {
- /* Hide some search errors */
- case -EACCES:
- case -ENOTDIR:
- case -EAGAIN:
- return ERR_PTR(-ENOKEY);
- default:
- return ERR_CAST(key);
- }
- }
-
- pr_devel("<==%s() = 0 [%x]\n", __func__, key_serial(key_ref_to_ptr(key)));
- return key_ref_to_ptr(key);
-}
-
/*
* Set up the signature parameters in an X.509 certificate. This involves
* digesting the signed data and extracting the signature.
}
EXPORT_SYMBOL_GPL(x509_check_signature);
-/*
- * Check the new certificate against the ones in the trust keyring. If one of
- * those is the signing key and validates the new certificate, then mark the
- * new certificate as being trusted.
- *
- * Return 0 if the new certificate was successfully validated, 1 if we couldn't
- * find a matching parent certificate in the trusted list and an error if there
- * is a matching certificate but the signature check fails.
- */
-static int x509_validate_trust(struct x509_certificate *cert,
- struct key *trust_keyring)
-{
- const struct public_key *pk;
- struct key *key;
- int ret = 1;
-
- key = x509_request_asymmetric_key(trust_keyring,
- cert->issuer, strlen(cert->issuer),
- cert->authority,
- strlen(cert->authority));
- if (!IS_ERR(key)) {
- pk = key->payload.data;
- ret = x509_check_signature(pk, cert);
- }
- return ret;
-}
-
/*
* Attempt to parse a data blob for a key as an X509 certificate.
*/
/* Check the signature on the key if it appears to be self-signed */
if (!cert->authority ||
strcmp(cert->fingerprint, cert->authority) == 0) {
- ret = x509_check_signature(cert->pub, cert); /* self-signed */
+ ret = x509_check_signature(cert->pub, cert);
if (ret < 0)
goto error_free_cert;
- } else {
- ret = x509_validate_trust(cert, system_trusted_keyring);
- if (!ret)
- prep->trusted = 1;
}
/* Propose a description */
aead_request_complete(req, err);
}
-static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
- unsigned int keylen)
+int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key,
+ unsigned int keylen)
{
- unsigned int authkeylen;
- unsigned int enckeylen;
- struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
- struct crypto_ahash *auth = ctx->auth;
- struct crypto_ablkcipher *enc = ctx->enc;
- struct rtattr *rta = (void *)key;
+ struct rtattr *rta = (struct rtattr *)key;
struct crypto_authenc_key_param *param;
- int err = -EINVAL;
if (!RTA_OK(rta, keylen))
- goto badkey;
+ return -EINVAL;
if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
- goto badkey;
+ return -EINVAL;
if (RTA_PAYLOAD(rta) < sizeof(*param))
- goto badkey;
+ return -EINVAL;
param = RTA_DATA(rta);
- enckeylen = be32_to_cpu(param->enckeylen);
+ keys->enckeylen = be32_to_cpu(param->enckeylen);
key += RTA_ALIGN(rta->rta_len);
keylen -= RTA_ALIGN(rta->rta_len);
- if (keylen < enckeylen)
- goto badkey;
+ if (keylen < keys->enckeylen)
+ return -EINVAL;
- authkeylen = keylen - enckeylen;
+ keys->authkeylen = keylen - keys->enckeylen;
+ keys->authkey = key;
+ keys->enckey = key + keys->authkeylen;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(crypto_authenc_extractkeys);
+
+static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
+ unsigned int keylen)
+{
+ struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
+ struct crypto_ahash *auth = ctx->auth;
+ struct crypto_ablkcipher *enc = ctx->enc;
+ struct crypto_authenc_keys keys;
+ int err = -EINVAL;
+
+ if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
+ goto badkey;
crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc) &
CRYPTO_TFM_REQ_MASK);
- err = crypto_ahash_setkey(auth, key, authkeylen);
+ err = crypto_ahash_setkey(auth, keys.authkey, keys.authkeylen);
crypto_aead_set_flags(authenc, crypto_ahash_get_flags(auth) &
CRYPTO_TFM_RES_MASK);
crypto_ablkcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK);
crypto_ablkcipher_set_flags(enc, crypto_aead_get_flags(authenc) &
CRYPTO_TFM_REQ_MASK);
- err = crypto_ablkcipher_setkey(enc, key + authkeylen, enckeylen);
+ err = crypto_ablkcipher_setkey(enc, keys.enckey, keys.enckeylen);
crypto_aead_set_flags(authenc, crypto_ablkcipher_get_flags(enc) &
CRYPTO_TFM_RES_MASK);
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+ err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+ err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
if (!err) {
struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
- struct ablkcipher_request *abreq = aead_request_ctx(areq);
- u8 *iv = (u8 *)(abreq + 1) +
- crypto_ablkcipher_reqsize(ctx->enc);
+ struct authenc_request_ctx *areq_ctx = aead_request_ctx(areq);
+ struct ablkcipher_request *abreq = (void *)(areq_ctx->tail
+ + ctx->reqoff);
+ u8 *iv = (u8 *)abreq - crypto_ablkcipher_ivsize(ctx->enc);
err = crypto_authenc_genicv(areq, iv, 0);
}
ihash = ohash + authsize;
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0;
+ return crypto_memneq(ihash, ohash, authsize) ? -EBADMSG : 0;
}
static int crypto_authenc_iverify(struct aead_request *req, u8 *iv,
static int crypto_authenc_esn_setkey(struct crypto_aead *authenc_esn, const u8 *key,
unsigned int keylen)
{
- unsigned int authkeylen;
- unsigned int enckeylen;
struct crypto_authenc_esn_ctx *ctx = crypto_aead_ctx(authenc_esn);
struct crypto_ahash *auth = ctx->auth;
struct crypto_ablkcipher *enc = ctx->enc;
- struct rtattr *rta = (void *)key;
- struct crypto_authenc_key_param *param;
+ struct crypto_authenc_keys keys;
int err = -EINVAL;
- if (!RTA_OK(rta, keylen))
+ if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
goto badkey;
- if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
- goto badkey;
- if (RTA_PAYLOAD(rta) < sizeof(*param))
- goto badkey;
-
- param = RTA_DATA(rta);
- enckeylen = be32_to_cpu(param->enckeylen);
-
- key += RTA_ALIGN(rta->rta_len);
- keylen -= RTA_ALIGN(rta->rta_len);
-
- if (keylen < enckeylen)
- goto badkey;
-
- authkeylen = keylen - enckeylen;
crypto_ahash_clear_flags(auth, CRYPTO_TFM_REQ_MASK);
crypto_ahash_set_flags(auth, crypto_aead_get_flags(authenc_esn) &
CRYPTO_TFM_REQ_MASK);
- err = crypto_ahash_setkey(auth, key, authkeylen);
+ err = crypto_ahash_setkey(auth, keys.authkey, keys.authkeylen);
crypto_aead_set_flags(authenc_esn, crypto_ahash_get_flags(auth) &
CRYPTO_TFM_RES_MASK);
crypto_ablkcipher_clear_flags(enc, CRYPTO_TFM_REQ_MASK);
crypto_ablkcipher_set_flags(enc, crypto_aead_get_flags(authenc_esn) &
CRYPTO_TFM_REQ_MASK);
- err = crypto_ablkcipher_setkey(enc, key + authkeylen, enckeylen);
+ err = crypto_ablkcipher_setkey(enc, keys.enckey, keys.enckeylen);
crypto_aead_set_flags(authenc_esn, crypto_ablkcipher_get_flags(enc) &
CRYPTO_TFM_RES_MASK);
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+ err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+ err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- err = memcmp(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
+ err = crypto_memneq(ihash, ahreq->result, authsize) ? -EBADMSG : 0;
if (err)
goto out;
ihash = ohash + authsize;
scatterwalk_map_and_copy(ihash, areq_ctx->sg, areq_ctx->cryptlen,
authsize, 0);
- return memcmp(ihash, ohash, authsize) ? -EBADMSG : 0;
+ return crypto_memneq(ihash, ohash, authsize) ? -EBADMSG : 0;
}
static int crypto_authenc_esn_iverify(struct aead_request *req, u8 *iv,
}
/* compute plaintext into mac */
- get_data_to_compute(cipher, pctx, plain, cryptlen);
+ if (cryptlen)
+ get_data_to_compute(cipher, pctx, plain, cryptlen);
out:
return err;
if (!err) {
err = crypto_ccm_auth(req, req->dst, cryptlen);
- if (!err && memcmp(pctx->auth_tag, pctx->odata, authsize))
+ if (!err && crypto_memneq(pctx->auth_tag, pctx->odata, authsize))
err = -EBADMSG;
}
aead_request_complete(req, err);
return err;
/* verify */
- if (memcmp(authtag, odata, authsize))
+ if (crypto_memneq(authtag, odata, authsize))
return -EBADMSG;
return err;
crypto_xor(auth_tag, iauth_tag, 16);
scatterwalk_map_and_copy(iauth_tag, req->src, cryptlen, authsize, 0);
- return memcmp(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0;
+ return crypto_memneq(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0;
}
static void gcm_decrypt_done(struct crypto_async_request *areq, int err)
--- /dev/null
+/*
+ * Constant-time equality testing of memory regions.
+ *
+ * Authors:
+ *
+ * James Yonan <james@openvpn.net>
+ * Daniel Borkmann <dborkman@redhat.com>
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013 OpenVPN Technologies, Inc. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of OpenVPN Technologies nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <crypto/algapi.h>
+
+#ifndef __HAVE_ARCH_CRYPTO_MEMNEQ
+
+/* Generic path for arbitrary size */
+static inline unsigned long
+__crypto_memneq_generic(const void *a, const void *b, size_t size)
+{
+ unsigned long neq = 0;
+
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+ while (size >= sizeof(unsigned long)) {
+ neq |= *(unsigned long *)a ^ *(unsigned long *)b;
+ a += sizeof(unsigned long);
+ b += sizeof(unsigned long);
+ size -= sizeof(unsigned long);
+ }
+#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+ while (size > 0) {
+ neq |= *(unsigned char *)a ^ *(unsigned char *)b;
+ a += 1;
+ b += 1;
+ size -= 1;
+ }
+ return neq;
+}
+
+/* Loop-free fast-path for frequently used 16-byte size */
+static inline unsigned long __crypto_memneq_16(const void *a, const void *b)
+{
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ if (sizeof(unsigned long) == 8)
+ return ((*(unsigned long *)(a) ^ *(unsigned long *)(b))
+ | (*(unsigned long *)(a+8) ^ *(unsigned long *)(b+8)));
+ else if (sizeof(unsigned int) == 4)
+ return ((*(unsigned int *)(a) ^ *(unsigned int *)(b))
+ | (*(unsigned int *)(a+4) ^ *(unsigned int *)(b+4))
+ | (*(unsigned int *)(a+8) ^ *(unsigned int *)(b+8))
+ | (*(unsigned int *)(a+12) ^ *(unsigned int *)(b+12)));
+ else
+#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */
+ return ((*(unsigned char *)(a) ^ *(unsigned char *)(b))
+ | (*(unsigned char *)(a+1) ^ *(unsigned char *)(b+1))
+ | (*(unsigned char *)(a+2) ^ *(unsigned char *)(b+2))
+ | (*(unsigned char *)(a+3) ^ *(unsigned char *)(b+3))
+ | (*(unsigned char *)(a+4) ^ *(unsigned char *)(b+4))
+ | (*(unsigned char *)(a+5) ^ *(unsigned char *)(b+5))
+ | (*(unsigned char *)(a+6) ^ *(unsigned char *)(b+6))
+ | (*(unsigned char *)(a+7) ^ *(unsigned char *)(b+7))
+ | (*(unsigned char *)(a+8) ^ *(unsigned char *)(b+8))
+ | (*(unsigned char *)(a+9) ^ *(unsigned char *)(b+9))
+ | (*(unsigned char *)(a+10) ^ *(unsigned char *)(b+10))
+ | (*(unsigned char *)(a+11) ^ *(unsigned char *)(b+11))
+ | (*(unsigned char *)(a+12) ^ *(unsigned char *)(b+12))
+ | (*(unsigned char *)(a+13) ^ *(unsigned char *)(b+13))
+ | (*(unsigned char *)(a+14) ^ *(unsigned char *)(b+14))
+ | (*(unsigned char *)(a+15) ^ *(unsigned char *)(b+15)));
+}
+
+/* Compare two areas of memory without leaking timing information,
+ * and with special optimizations for common sizes. Users should
+ * not call this function directly, but should instead use
+ * crypto_memneq defined in crypto/algapi.h.
+ */
+noinline unsigned long __crypto_memneq(const void *a, const void *b,
+ size_t size)
+{
+ switch (size) {
+ case 16:
+ return __crypto_memneq_16(a, b);
+ default:
+ return __crypto_memneq_generic(a, b, size);
+ }
+}
+EXPORT_SYMBOL(__crypto_memneq);
+
+#endif /* __HAVE_ARCH_CRYPTO_MEMNEQ */
ret += tcrypt_test("cmac(des3_ede)");
break;
+ case 155:
+ ret += tcrypt_test("authenc(hmac(sha1),cbc(aes))");
+ break;
+
case 200:
test_cipher_speed("ecb(aes)", ENCRYPT, sec, NULL, 0,
speed_template_16_24_32);
goto out;
}
- sg_init_one(&sg[0], input,
- template[i].ilen + (enc ? authsize : 0));
-
if (diff_dst) {
output = xoutbuf[0];
output += align_offset;
+ sg_init_one(&sg[0], input, template[i].ilen);
sg_init_one(&sgout[0], output,
+ template[i].rlen);
+ } else {
+ sg_init_one(&sg[0], input,
template[i].ilen +
(enc ? authsize : 0));
- } else {
output = input;
}
memcpy(q, template[i].input + temp,
template[i].tap[k]);
- n = template[i].tap[k];
- if (k == template[i].np - 1 && enc)
- n += authsize;
- if (offset_in_page(q) + n < PAGE_SIZE)
- q[n] = 0;
-
sg_set_buf(&sg[k], q, template[i].tap[k]);
if (diff_dst) {
offset_in_page(IDX[k]);
memset(q, 0, template[i].tap[k]);
- if (offset_in_page(q) + n < PAGE_SIZE)
- q[n] = 0;
sg_set_buf(&sgout[k], q,
template[i].tap[k]);
}
+ n = template[i].tap[k];
+ if (k == template[i].np - 1 && enc)
+ n += authsize;
+ if (offset_in_page(q) + n < PAGE_SIZE)
+ q[n] = 0;
+
temp += template[i].tap[k];
}
goto out;
}
- sg[k - 1].length += authsize;
-
if (diff_dst)
sgout[k - 1].length += authsize;
+ else
+ sg[k - 1].length += authsize;
}
sg_init_table(asg, template[i].anp);
struct acpi_buffer *output_buffer);
acpi_status
-acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
+acpi_rs_create_aml_resources(struct acpi_buffer *resource_list,
struct acpi_buffer *output_buffer);
acpi_status
u32 aml_buffer_length, acpi_size * size_needed);
acpi_status
-acpi_rs_get_aml_length(struct acpi_resource *linked_list_buffer,
- acpi_size * size_needed);
+acpi_rs_get_aml_length(struct acpi_resource *resource_list,
+ acpi_size resource_list_size, acpi_size * size_needed);
acpi_status
acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
void acpi_ns_delete_node(struct acpi_namespace_node *node)
{
union acpi_operand_object *obj_desc;
+ union acpi_operand_object *next_desc;
ACPI_FUNCTION_NAME(ns_delete_node);
acpi_ns_detach_object(node);
/*
- * Delete an attached data object if present (an object that was created
- * and attached via acpi_attach_data). Note: After any normal object is
- * detached above, the only possible remaining object is a data object.
+ * Delete an attached data object list if present (objects that were
+ * attached via acpi_attach_data). Note: After any normal object is
+ * detached above, the only possible remaining object(s) are data
+ * objects, in a linked list.
*/
obj_desc = node->object;
- if (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) {
+ while (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) {
/* Invoke the attached data deletion handler if present */
obj_desc->data.handler(node, obj_desc->data.pointer);
}
+ next_desc = obj_desc->common.next_object;
acpi_ut_remove_reference(obj_desc);
+ obj_desc = next_desc;
+ }
+
+ /* Special case for the statically allocated root node */
+
+ if (node == acpi_gbl_root_node) {
+ return;
}
/* Now we can delete the node */
void acpi_ns_terminate(void)
{
- union acpi_operand_object *obj_desc;
+ acpi_status status;
ACPI_FUNCTION_TRACE(ns_terminate);
/*
- * 1) Free the entire namespace -- all nodes and objects
- *
- * Delete all object descriptors attached to namepsace nodes
+ * Free the entire namespace -- all nodes and all objects
+ * attached to the nodes
*/
acpi_ns_delete_namespace_subtree(acpi_gbl_root_node);
- /* Detach any objects attached to the root */
+ /* Delete any objects attached to the root node */
- obj_desc = acpi_ns_get_attached_object(acpi_gbl_root_node);
- if (obj_desc) {
- acpi_ns_detach_object(acpi_gbl_root_node);
+ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(status)) {
+ return_VOID;
}
+ acpi_ns_delete_node(acpi_gbl_root_node);
+ (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace freed\n"));
return_VOID;
}
* FUNCTION: acpi_rs_get_aml_length
*
* PARAMETERS: resource - Pointer to the resource linked list
+ * resource_list_size - Size of the resource linked list
* size_needed - Where the required size is returned
*
* RETURN: Status
******************************************************************************/
acpi_status
-acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed)
+acpi_rs_get_aml_length(struct acpi_resource *resource,
+ acpi_size resource_list_size, acpi_size * size_needed)
{
acpi_size aml_size_needed = 0;
+ struct acpi_resource *resource_end;
acpi_rs_length total_size;
ACPI_FUNCTION_TRACE(rs_get_aml_length);
/* Traverse entire list of internal resource descriptors */
- while (resource) {
+ resource_end =
+ ACPI_ADD_PTR(struct acpi_resource, resource, resource_list_size);
+ while (resource < resource_end) {
/* Validate the descriptor type */
*
* FUNCTION: acpi_rs_create_aml_resources
*
- * PARAMETERS: linked_list_buffer - Pointer to the resource linked list
- * output_buffer - Pointer to the user's buffer
+ * PARAMETERS: resource_list - Pointer to the resource list buffer
+ * output_buffer - Where the AML buffer is returned
*
* RETURN: Status AE_OK if okay, else a valid acpi_status code.
* If the output_buffer is too small, the error will be
* AE_BUFFER_OVERFLOW and output_buffer->Length will point
* to the size buffer needed.
*
- * DESCRIPTION: Takes the linked list of device resources and
- * creates a bytestream to be used as input for the
- * _SRS control method.
+ * DESCRIPTION: Converts a list of device resources to an AML bytestream
+ * to be used as input for the _SRS control method.
*
******************************************************************************/
acpi_status
-acpi_rs_create_aml_resources(struct acpi_resource *linked_list_buffer,
+acpi_rs_create_aml_resources(struct acpi_buffer *resource_list,
struct acpi_buffer *output_buffer)
{
acpi_status status;
ACPI_FUNCTION_TRACE(rs_create_aml_resources);
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "LinkedListBuffer = %p\n",
- linked_list_buffer));
+ /* Params already validated, no need to re-validate here */
- /*
- * Params already validated, so we don't re-validate here
- *
- * Pass the linked_list_buffer into a module that calculates
- * the buffer size needed for the byte stream.
- */
- status = acpi_rs_get_aml_length(linked_list_buffer, &aml_size_needed);
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ResourceList Buffer = %p\n",
+ resource_list->pointer));
+
+ /* Get the buffer size needed for the AML byte stream */
+
+ status = acpi_rs_get_aml_length(resource_list->pointer,
+ resource_list->length,
+ &aml_size_needed);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "AmlSizeNeeded=%X, %s\n",
(u32)aml_size_needed, acpi_format_exception(status)));
/* Do the conversion */
- status =
- acpi_rs_convert_resources_to_aml(linked_list_buffer,
- aml_size_needed,
- output_buffer->pointer);
+ status = acpi_rs_convert_resources_to_aml(resource_list->pointer,
+ aml_size_needed,
+ output_buffer->pointer);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
* Convert the linked list into a byte stream
*/
buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
- status = acpi_rs_create_aml_resources(in_buffer->pointer, &buffer);
+ status = acpi_rs_create_aml_resources(in_buffer, &buffer);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
}
acpi_gbl_prev_thread_id = thread_id;
+ acpi_gbl_nesting_level = 0;
}
/*
*/
acpi_os_printf("%9s-%04ld ", module_name, line_number);
+#ifdef ACPI_EXEC_APP
+ /*
+ * For acpi_exec only, emit the thread ID and nesting level.
+ * Note: nesting level is really only useful during a single-thread
+ * execution. Otherwise, multiple threads will keep resetting the
+ * level.
+ */
if (ACPI_LV_THREADS & acpi_dbg_level) {
acpi_os_printf("[%u] ", (u32)thread_id);
}
- acpi_os_printf("[%02ld] %-22.22s: ",
- acpi_gbl_nesting_level,
- acpi_ut_trim_function_name(function_name));
+ acpi_os_printf("[%02ld] ", acpi_gbl_nesting_level);
+#endif
+
+ acpi_os_printf("%-22.22s: ", acpi_ut_trim_function_name(function_name));
va_start(args, format);
acpi_os_vprintf(format, args);
component_id, "%s\n", acpi_gbl_fn_exit_str);
}
- acpi_gbl_nesting_level--;
+ if (acpi_gbl_nesting_level) {
+ acpi_gbl_nesting_level--;
+ }
}
ACPI_EXPORT_SYMBOL(acpi_ut_exit)
}
}
- acpi_gbl_nesting_level--;
+ if (acpi_gbl_nesting_level) {
+ acpi_gbl_nesting_level--;
+ }
}
ACPI_EXPORT_SYMBOL(acpi_ut_status_exit)
ACPI_FORMAT_UINT64(value));
}
- acpi_gbl_nesting_level--;
+ if (acpi_gbl_nesting_level) {
+ acpi_gbl_nesting_level--;
+ }
}
ACPI_EXPORT_SYMBOL(acpi_ut_value_exit)
ptr);
}
- acpi_gbl_nesting_level--;
+ if (acpi_gbl_nesting_level) {
+ acpi_gbl_nesting_level--;
+ }
}
#endif
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/acpi_io.h>
-#include <acpi/acpiosxf.h>
/* ACPI NVS regions, APEI may use it */
.ids = root_device_ids,
.attach = acpi_pci_root_add,
.detach = acpi_pci_root_remove,
+ .hotplug = {
+ .ignore = true,
+ },
};
static DEFINE_MUTEX(osc_lock);
*/
list_for_each_entry(hwid, &pnp.ids, list) {
handler = acpi_scan_match_handler(hwid->id, NULL);
- if (handler) {
+ if (handler && !handler->hotplug.ignore) {
acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
acpi_hotplug_notify_cb, handler);
break;
* generate wakeup events.
*/
if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
- acpi_event_status pwr_btn_status;
+ acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
sprintf(table_attr->name + ACPI_NAME_SIZE, "%d",
table_attr->instance);
- table_attr->attr.size = 0;
+ table_attr->attr.size = table_header->length;
table_attr->attr.read = acpi_table_show;
table_attr->attr.attr.name = table_attr->name;
table_attr->attr.attr.mode = 0400;
{
struct acpi_table_attr *table_attr;
struct acpi_table_header *table_header = NULL;
- int table_index = 0;
- int result;
+ int table_index;
+ acpi_status status;
+ int ret;
tables_kobj = kobject_create_and_add("tables", acpi_kobj);
if (!tables_kobj)
if (!dynamic_tables_kobj)
goto err_dynamic_tables;
- do {
- result = acpi_get_table_by_index(table_index, &table_header);
- if (!result) {
- table_index++;
- table_attr = NULL;
- table_attr =
- kzalloc(sizeof(struct acpi_table_attr), GFP_KERNEL);
- if (!table_attr)
- return -ENOMEM;
-
- acpi_table_attr_init(table_attr, table_header);
- result =
- sysfs_create_bin_file(tables_kobj,
- &table_attr->attr);
- if (result) {
- kfree(table_attr);
- return result;
- } else
- list_add_tail(&table_attr->node,
- &acpi_table_attr_list);
+ for (table_index = 0;; table_index++) {
+ status = acpi_get_table_by_index(table_index, &table_header);
+
+ if (status == AE_BAD_PARAMETER)
+ break;
+
+ if (ACPI_FAILURE(status))
+ continue;
+
+ table_attr = NULL;
+ table_attr = kzalloc(sizeof(*table_attr), GFP_KERNEL);
+ if (!table_attr)
+ return -ENOMEM;
+
+ acpi_table_attr_init(table_attr, table_header);
+ ret = sysfs_create_bin_file(tables_kobj, &table_attr->attr);
+ if (ret) {
+ kfree(table_attr);
+ return ret;
}
- } while (!result);
+ list_add_tail(&table_attr->node, &acpi_table_attr_list);
+ }
+
kobject_uevent(tables_kobj, KOBJ_ADD);
kobject_uevent(dynamic_tables_kobj, KOBJ_ADD);
- result = acpi_install_table_handler(acpi_sysfs_table_handler, NULL);
+ status = acpi_install_table_handler(acpi_sysfs_table_handler, NULL);
- return result == AE_OK ? 0 : -EINVAL;
+ return ACPI_FAILURE(status) ? -EINVAL : 0;
err_dynamic_tables:
kobject_put(tables_kobj);
err:
.driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3),
.driver_data = board_ahci_yes_fbs },
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
+ .driver_data = board_ahci_yes_fbs },
/* Promise */
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
static const struct of_device_id ahci_of_match[] = {
{ .compatible = "snps,spear-ahci", },
{ .compatible = "snps,exynos5440-ahci", },
+ { .compatible = "ibm,476gtr-ahci", },
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
for (i = 0; i < SATA_PMP_MAX_PORTS; i++)
ata_tlink_delete(&ap->pmp_link[i]);
}
- ata_tport_delete(ap);
-
/* remove the associated SCSI host */
scsi_remove_host(ap->scsi_host);
+ ata_tport_delete(ap);
}
/**
shost->max_lun = 1;
shost->max_channel = 1;
shost->max_cmd_len = 16;
+ shost->no_write_same = 1;
/* Schedule policy is determined by ->qc_defer()
* callback and it needs to see every deferred qc.
static bool odd_can_poweroff(struct ata_device *ata_dev)
{
acpi_handle handle;
- acpi_status status;
struct acpi_device *acpi_dev;
handle = ata_dev_acpi_handle(ata_dev);
if (!handle)
return false;
- status = acpi_bus_get_device(handle, &acpi_dev);
- if (ACPI_FAILURE(status))
+ if (acpi_bus_get_device(handle, &acpi_dev))
return false;
return acpi_device_can_poweroff(acpi_dev);
ret = clk_set_rate(acdev->clk, 166000000);
if (ret) {
dev_warn(acdev->host->dev, "clock set rate failed");
+ clk_disable_unprepare(acdev->clk);
return ret;
}
#include <linux/async.h>
#include <linux/suspend.h>
#include <trace/events/power.h>
+#include <linux/cpufreq.h>
#include <linux/cpuidle.h>
#include <linux/timer.h>
dpm_show_time(starttime, state, "noirq");
resume_device_irqs();
cpuidle_resume();
+ cpufreq_resume();
}
/**
ktime_t starttime = ktime_get();
int error = 0;
+ cpufreq_suspend();
cpuidle_pause();
suspend_device_irqs();
mutex_lock(&dpm_list_mtx);
if ((ring_req->operation == BLKIF_OP_INDIRECT) &&
(i % SEGS_PER_INDIRECT_FRAME == 0)) {
- unsigned long pfn;
+ unsigned long uninitialized_var(pfn);
if (segments)
kunmap_atomic(segments);
bdev = bdget_disk(disk, 0);
+ if (!bdev) {
+ WARN(1, "Block device %s yanked out from us!\n", disk->disk_name);
+ goto out_mutex;
+ }
if (bdev->bd_openers)
goto out;
out:
bdput(bdev);
+out_mutex:
mutex_unlock(&blkfront_mutex);
}
If unsure, say Y.
+config HW_RANDOM_OMAP3_ROM
+ tristate "OMAP3 ROM Random Number Generator support"
+ depends on HW_RANDOM && ARCH_OMAP3
+ default HW_RANDOM
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on OMAP34xx processors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called omap3-rom-rng.
+
+ If unsure, say Y.
+
config HW_RANDOM_OCTEON
tristate "Octeon Random Number Generator support"
depends on HW_RANDOM && CAVIUM_OCTEON_SOC
module will be called tpm-rng.
If unsure, say Y.
+
+config HW_RANDOM_MSM
+ tristate "Qualcomm MSM Random Number Generator support"
+ depends on HW_RANDOM && ARCH_MSM
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on Qualcomm MSM SoCs.
+
+ To compile this driver as a module, choose M here. the
+ module will be called msm-rng.
+
+ If unsure, say Y.
obj-$(CONFIG_HW_RANDOM_VIA) += via-rng.o
obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
+obj-$(CONFIG_HW_RANDOM_OMAP3_ROM) += omap3-rom-rng.o
obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o
obj-$(CONFIG_HW_RANDOM_EXYNOS) += exynos-rng.o
obj-$(CONFIG_HW_RANDOM_TPM) += tpm-rng.o
obj-$(CONFIG_HW_RANDOM_BCM2835) += bcm2835-rng.o
+obj-$(CONFIG_HW_RANDOM_MSM) += msm-rng.o
--- /dev/null
+/*
+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+/* Device specific register offsets */
+#define PRNG_DATA_OUT 0x0000
+#define PRNG_STATUS 0x0004
+#define PRNG_LFSR_CFG 0x0100
+#define PRNG_CONFIG 0x0104
+
+/* Device specific register masks and config values */
+#define PRNG_LFSR_CFG_MASK 0x0000ffff
+#define PRNG_LFSR_CFG_CLOCKS 0x0000dddd
+#define PRNG_CONFIG_HW_ENABLE BIT(1)
+#define PRNG_STATUS_DATA_AVAIL BIT(0)
+
+#define MAX_HW_FIFO_DEPTH 16
+#define MAX_HW_FIFO_SIZE (MAX_HW_FIFO_DEPTH * 4)
+#define WORD_SZ 4
+
+struct msm_rng {
+ void __iomem *base;
+ struct clk *clk;
+ struct hwrng hwrng;
+};
+
+#define to_msm_rng(p) container_of(p, struct msm_rng, hwrng)
+
+static int msm_rng_enable(struct hwrng *hwrng, int enable)
+{
+ struct msm_rng *rng = to_msm_rng(hwrng);
+ u32 val;
+ int ret;
+
+ ret = clk_prepare_enable(rng->clk);
+ if (ret)
+ return ret;
+
+ if (enable) {
+ /* Enable PRNG only if it is not already enabled */
+ val = readl_relaxed(rng->base + PRNG_CONFIG);
+ if (val & PRNG_CONFIG_HW_ENABLE)
+ goto already_enabled;
+
+ val = readl_relaxed(rng->base + PRNG_LFSR_CFG);
+ val &= ~PRNG_LFSR_CFG_MASK;
+ val |= PRNG_LFSR_CFG_CLOCKS;
+ writel(val, rng->base + PRNG_LFSR_CFG);
+
+ val = readl_relaxed(rng->base + PRNG_CONFIG);
+ val |= PRNG_CONFIG_HW_ENABLE;
+ writel(val, rng->base + PRNG_CONFIG);
+ } else {
+ val = readl_relaxed(rng->base + PRNG_CONFIG);
+ val &= ~PRNG_CONFIG_HW_ENABLE;
+ writel(val, rng->base + PRNG_CONFIG);
+ }
+
+already_enabled:
+ clk_disable_unprepare(rng->clk);
+ return 0;
+}
+
+static int msm_rng_read(struct hwrng *hwrng, void *data, size_t max, bool wait)
+{
+ struct msm_rng *rng = to_msm_rng(hwrng);
+ size_t currsize = 0;
+ u32 *retdata = data;
+ size_t maxsize;
+ int ret;
+ u32 val;
+
+ /* calculate max size bytes to transfer back to caller */
+ maxsize = min_t(size_t, MAX_HW_FIFO_SIZE, max);
+
+ /* no room for word data */
+ if (maxsize < WORD_SZ)
+ return 0;
+
+ ret = clk_prepare_enable(rng->clk);
+ if (ret)
+ return ret;
+
+ /* read random data from hardware */
+ do {
+ val = readl_relaxed(rng->base + PRNG_STATUS);
+ if (!(val & PRNG_STATUS_DATA_AVAIL))
+ break;
+
+ val = readl_relaxed(rng->base + PRNG_DATA_OUT);
+ if (!val)
+ break;
+
+ *retdata++ = val;
+ currsize += WORD_SZ;
+
+ /* make sure we stay on 32bit boundary */
+ if ((maxsize - currsize) < WORD_SZ)
+ break;
+ } while (currsize < maxsize);
+
+ clk_disable_unprepare(rng->clk);
+
+ return currsize;
+}
+
+static int msm_rng_init(struct hwrng *hwrng)
+{
+ return msm_rng_enable(hwrng, 1);
+}
+
+static void msm_rng_cleanup(struct hwrng *hwrng)
+{
+ msm_rng_enable(hwrng, 0);
+}
+
+static int msm_rng_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct msm_rng *rng;
+ int ret;
+
+ rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL);
+ if (!rng)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, rng);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rng->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(rng->base))
+ return PTR_ERR(rng->base);
+
+ rng->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(rng->clk))
+ return PTR_ERR(rng->clk);
+
+ rng->hwrng.name = KBUILD_MODNAME,
+ rng->hwrng.init = msm_rng_init,
+ rng->hwrng.cleanup = msm_rng_cleanup,
+ rng->hwrng.read = msm_rng_read,
+
+ ret = hwrng_register(&rng->hwrng);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register hwrng\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int msm_rng_remove(struct platform_device *pdev)
+{
+ struct msm_rng *rng = platform_get_drvdata(pdev);
+
+ hwrng_unregister(&rng->hwrng);
+ return 0;
+}
+
+static const struct of_device_id msm_rng_of_match[] = {
+ { .compatible = "qcom,prng", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, msm_rng_of_match);
+
+static struct platform_driver msm_rng_driver = {
+ .probe = msm_rng_probe,
+ .remove = msm_rng_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(msm_rng_of_match),
+ }
+};
+module_platform_driver(msm_rng_driver);
+
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
+MODULE_AUTHOR("The Linux Foundation");
+MODULE_DESCRIPTION("Qualcomm MSM random number generator driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * omap3-rom-rng.c - RNG driver for TI OMAP3 CPU family
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Juha Yrjola <juha.yrjola@solidboot.com>
+ *
+ * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/random.h>
+#include <linux/hw_random.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#define RNG_RESET 0x01
+#define RNG_GEN_PRNG_HW_INIT 0x02
+#define RNG_GEN_HW 0x08
+
+/* param1: ptr, param2: count, param3: flag */
+static u32 (*omap3_rom_rng_call)(u32, u32, u32);
+
+static struct timer_list idle_timer;
+static int rng_idle;
+static struct clk *rng_clk;
+
+static void omap3_rom_rng_idle(unsigned long data)
+{
+ int r;
+
+ r = omap3_rom_rng_call(0, 0, RNG_RESET);
+ if (r != 0) {
+ pr_err("reset failed: %d\n", r);
+ return;
+ }
+ clk_disable_unprepare(rng_clk);
+ rng_idle = 1;
+}
+
+static int omap3_rom_rng_get_random(void *buf, unsigned int count)
+{
+ u32 r;
+ u32 ptr;
+
+ del_timer_sync(&idle_timer);
+ if (rng_idle) {
+ clk_prepare_enable(rng_clk);
+ r = omap3_rom_rng_call(0, 0, RNG_GEN_PRNG_HW_INIT);
+ if (r != 0) {
+ clk_disable_unprepare(rng_clk);
+ pr_err("HW init failed: %d\n", r);
+ return -EIO;
+ }
+ rng_idle = 0;
+ }
+
+ ptr = virt_to_phys(buf);
+ r = omap3_rom_rng_call(ptr, count, RNG_GEN_HW);
+ mod_timer(&idle_timer, jiffies + msecs_to_jiffies(500));
+ if (r != 0)
+ return -EINVAL;
+ return 0;
+}
+
+static int omap3_rom_rng_data_present(struct hwrng *rng, int wait)
+{
+ return 1;
+}
+
+static int omap3_rom_rng_data_read(struct hwrng *rng, u32 *data)
+{
+ int r;
+
+ r = omap3_rom_rng_get_random(data, 4);
+ if (r < 0)
+ return r;
+ return 4;
+}
+
+static struct hwrng omap3_rom_rng_ops = {
+ .name = "omap3-rom",
+ .data_present = omap3_rom_rng_data_present,
+ .data_read = omap3_rom_rng_data_read,
+};
+
+static int omap3_rom_rng_probe(struct platform_device *pdev)
+{
+ pr_info("initializing\n");
+
+ omap3_rom_rng_call = pdev->dev.platform_data;
+ if (!omap3_rom_rng_call) {
+ pr_err("omap3_rom_rng_call is NULL\n");
+ return -EINVAL;
+ }
+
+ setup_timer(&idle_timer, omap3_rom_rng_idle, 0);
+ rng_clk = clk_get(&pdev->dev, "ick");
+ if (IS_ERR(rng_clk)) {
+ pr_err("unable to get RNG clock\n");
+ return PTR_ERR(rng_clk);
+ }
+
+ /* Leave the RNG in reset state. */
+ clk_prepare_enable(rng_clk);
+ omap3_rom_rng_idle(0);
+
+ return hwrng_register(&omap3_rom_rng_ops);
+}
+
+static int omap3_rom_rng_remove(struct platform_device *pdev)
+{
+ hwrng_unregister(&omap3_rom_rng_ops);
+ clk_disable_unprepare(rng_clk);
+ clk_put(rng_clk);
+ return 0;
+}
+
+static struct platform_driver omap3_rom_rng_driver = {
+ .driver = {
+ .name = "omap3-rom-rng",
+ .owner = THIS_MODULE,
+ },
+ .probe = omap3_rom_rng_probe,
+ .remove = omap3_rom_rng_remove,
+};
+
+module_platform_driver(omap3_rom_rng_driver);
+
+MODULE_ALIAS("platform:omap3-rom-rng");
+MODULE_AUTHOR("Juha Yrjola");
+MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_LICENSE("GPL");
#include <linux/hw_random.h>
#include <asm/vio.h>
-#define MODULE_NAME "pseries-rng"
static int pseries_rng_data_read(struct hwrng *rng, u32 *data)
{
};
static struct hwrng pseries_rng = {
- .name = MODULE_NAME,
+ .name = KBUILD_MODNAME,
.data_read = pseries_rng_data_read,
};
MODULE_DEVICE_TABLE(vio, pseries_rng_driver_ids);
static struct vio_driver pseries_rng_driver = {
- .name = MODULE_NAME,
+ .name = KBUILD_MODNAME,
.probe = pseries_rng_probe,
.remove = pseries_rng_remove,
.get_desired_dma = pseries_rng_get_desired_dma,
module_init(mod_init);
module_exit(mod_exit);
-static struct x86_cpu_id via_rng_cpu_id[] = {
+static struct x86_cpu_id __maybe_unused via_rng_cpu_id[] = {
X86_FEATURE_MATCH(X86_FEATURE_XSTORE),
{}
};
config ARM_ARCH_TIMER_EVTSTREAM
bool "Support for ARM architected timer event stream generation"
default y if ARM_ARCH_TIMER
+ depends on ARM_ARCH_TIMER
help
This option enables support for event stream generation based on
the ARM architected timer. It is used for waking up CPUs executing
goto err1;
}
- return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev),
- cfg->clockevent_rating);
+ ret = clk_prepare(p->clk);
+ if (ret < 0)
+ goto err2;
+
+ ret = sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev),
+ cfg->clockevent_rating);
+ if (ret < 0)
+ goto err3;
+
+ return 0;
+ err3:
+ clk_unprepare(p->clk);
+ err2:
+ clk_put(p->clk);
err1:
iounmap(p->mapbase);
err0:
ret = PTR_ERR(p->clk);
goto err1;
}
+
+ ret = clk_prepare(p->clk);
+ if (ret < 0)
+ goto err2;
+
p->cs_enabled = false;
p->enable_count = 0;
- return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev),
- cfg->clockevent_rating,
- cfg->clocksource_rating);
+ ret = sh_tmu_register(p, (char *)dev_name(&p->pdev->dev),
+ cfg->clockevent_rating,
+ cfg->clocksource_rating);
+ if (ret < 0)
+ goto err3;
+
+ return 0;
+
+ err3:
+ clk_unprepare(p->clk);
+ err2:
+ clk_put(p->clk);
err1:
iounmap(p->mapbase);
err0:
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/tick.h>
#include <trace/events/power.h>
static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor);
#endif
+/* Flag to suspend/resume CPUFreq governors */
+static bool cpufreq_suspended;
+
static inline bool has_target(void)
{
return cpufreq_driver->target_index || cpufreq_driver->target;
.remove_dev = cpufreq_remove_dev,
};
+void cpufreq_suspend(void)
+{
+ struct cpufreq_policy *policy;
+
+ if (!has_target())
+ return;
+
+ pr_debug("%s: Suspending Governors\n", __func__);
+
+ list_for_each_entry(policy, &cpufreq_policy_list, policy_list)
+ if (__cpufreq_governor(policy, CPUFREQ_GOV_STOP))
+ pr_err("%s: Failed to stop governor for policy: %p\n",
+ __func__, policy);
+
+ cpufreq_suspended = true;
+}
+
+void cpufreq_resume(void)
+{
+ struct cpufreq_policy *policy;
+
+ if (!has_target())
+ return;
+
+ pr_debug("%s: Resuming Governors\n", __func__);
+
+ cpufreq_suspended = false;
+
+ list_for_each_entry(policy, &cpufreq_policy_list, policy_list)
+ if (__cpufreq_governor(policy, CPUFREQ_GOV_START)
+ || __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS))
+ pr_err("%s: Failed to start governor for policy: %p\n",
+ __func__, policy);
+}
+
/**
* cpufreq_bp_suspend - Prepare the boot CPU for system suspend.
*
struct cpufreq_governor *gov = NULL;
#endif
+ /* Don't start any governor operations if we are entering suspend */
+ if (cpufreq_suspended)
+ return 0;
+
if (policy->governor->max_transition_latency &&
policy->cpuinfo.transition_latency >
policy->governor->max_transition_latency) {
dev = get_cpu_device(cpu);
if (dev) {
- if (action & CPU_TASKS_FROZEN)
- frozen = true;
-
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_ONLINE:
__cpufreq_add_dev(dev, NULL, frozen);
pr_debug("%s: failed initialization\n", __func__);
return -EINVAL;
}
-EXPORT_SYMBOL(exynos4210_cpufreq_init);
pr_debug("%s: failed initialization\n", __func__);
return -EINVAL;
}
-EXPORT_SYMBOL(exynos4x12_cpufreq_init);
pr_err("%s: failed initialization\n", __func__);
return -EINVAL;
}
-EXPORT_SYMBOL(exynos5250_cpufreq_init);
mutex_lock(&tegra_cpu_lock);
- if (is_suspended) {
- ret = -EBUSY;
+ if (is_suspended)
goto out;
- }
freq = freq_table[index].frequency;
*/
void cpuidle_unregister_device(struct cpuidle_device *dev)
{
- if (dev->registered == 0)
+ if (!dev || dev->registered == 0)
return;
cpuidle_pause_and_lock();
help
Enables the driver module for Freescale's Cryptographic Accelerator
and Assurance Module (CAAM), also known as the SEC version 4 (SEC4).
- This module adds a job ring operation interface, and configures h/w
+ This module creates job ring devices, and configures h/w
to operate as a DPAA component automatically, depending
on h/w feature availability.
To compile this driver as a module, choose M here: the module
will be called caam.
+config CRYPTO_DEV_FSL_CAAM_JR
+ tristate "Freescale CAAM Job Ring driver backend"
+ depends on CRYPTO_DEV_FSL_CAAM
+ default y
+ help
+ Enables the driver module for Job Rings which are part of
+ Freescale's Cryptographic Accelerator
+ and Assurance Module (CAAM). This module adds a job ring operation
+ interface.
+
+ To compile this driver as a module, choose M here: the module
+ will be called caam_jr.
+
config CRYPTO_DEV_FSL_CAAM_RINGSIZE
int "Job Ring size"
- depends on CRYPTO_DEV_FSL_CAAM
+ depends on CRYPTO_DEV_FSL_CAAM_JR
range 2 9
default "9"
help
config CRYPTO_DEV_FSL_CAAM_INTC
bool "Job Ring interrupt coalescing"
- depends on CRYPTO_DEV_FSL_CAAM
+ depends on CRYPTO_DEV_FSL_CAAM_JR
default n
help
Enable the Job Ring's interrupt coalescing feature.
config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
tristate "Register algorithm implementations with the Crypto API"
- depends on CRYPTO_DEV_FSL_CAAM
+ depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
default y
select CRYPTO_ALGAPI
select CRYPTO_AUTHENC
config CRYPTO_DEV_FSL_CAAM_AHASH_API
tristate "Register hash algorithm implementations with Crypto API"
- depends on CRYPTO_DEV_FSL_CAAM
+ depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
default y
select CRYPTO_HASH
help
config CRYPTO_DEV_FSL_CAAM_RNG_API
tristate "Register caam device for hwrng API"
- depends on CRYPTO_DEV_FSL_CAAM
+ depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
default y
select CRYPTO_RNG
select HW_RANDOM
endif
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam.o
+obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_JR) += caam_jr.o
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API) += caamalg.o
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
-caam-objs := ctrl.o jr.o error.o key_gen.o
+caam-objs := ctrl.o
+caam_jr-objs := jr.o key_gen.o error.o
#else
#define debug(format, arg...)
#endif
+static struct list_head alg_list;
/* Set DK bit in class 1 operation if shared */
static inline void append_dec_op1(u32 *desc, u32 type)
ivsize, 1);
print_hex_dump(KERN_ERR, "dst @"__stringify(__LINE__)": ",
DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(req->dst),
- req->cryptlen, 1);
+ req->cryptlen - ctx->authsize, 1);
#endif
if (err) {
(edesc->src_nents ? : 1);
in_options = LDST_SGF;
}
- if (encrypt)
- append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize +
- req->cryptlen - authsize, in_options);
- else
- append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize +
- req->cryptlen, in_options);
+
+ append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen,
+ in_options);
if (likely(req->src == req->dst)) {
if (all_contig) {
}
}
if (encrypt)
- append_seq_out_ptr(desc, dst_dma, req->cryptlen, out_options);
+ append_seq_out_ptr(desc, dst_dma, req->cryptlen + authsize,
+ out_options);
else
append_seq_out_ptr(desc, dst_dma, req->cryptlen - authsize,
out_options);
sec4_sg_index += edesc->assoc_nents + 1 + edesc->src_nents;
in_options = LDST_SGF;
}
- append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize +
- req->cryptlen - authsize, in_options);
+ append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen,
+ in_options);
if (contig & GIV_DST_CONTIG) {
dst_dma = edesc->iv_dma;
}
}
- append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen, out_options);
+ append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen + authsize,
+ out_options);
}
/*
* allocate and map the aead extended descriptor
*/
static struct aead_edesc *aead_edesc_alloc(struct aead_request *req,
- int desc_bytes, bool *all_contig_ptr)
+ int desc_bytes, bool *all_contig_ptr,
+ bool encrypt)
{
struct crypto_aead *aead = crypto_aead_reqtfm(req);
struct caam_ctx *ctx = crypto_aead_ctx(aead);
bool assoc_chained = false, src_chained = false, dst_chained = false;
int ivsize = crypto_aead_ivsize(aead);
int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
+ unsigned int authsize = ctx->authsize;
assoc_nents = sg_count(req->assoc, req->assoclen, &assoc_chained);
- src_nents = sg_count(req->src, req->cryptlen, &src_chained);
- if (unlikely(req->dst != req->src))
- dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained);
+ if (unlikely(req->dst != req->src)) {
+ src_nents = sg_count(req->src, req->cryptlen, &src_chained);
+ dst_nents = sg_count(req->dst,
+ req->cryptlen +
+ (encrypt ? authsize : (-authsize)),
+ &dst_chained);
+ } else {
+ src_nents = sg_count(req->src,
+ req->cryptlen +
+ (encrypt ? authsize : 0),
+ &src_chained);
+ }
sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1,
DMA_TO_DEVICE, assoc_chained);
u32 *desc;
int ret = 0;
- req->cryptlen += ctx->authsize;
-
/* allocate extended descriptor */
edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN *
- CAAM_CMD_SZ, &all_contig);
+ CAAM_CMD_SZ, &all_contig, true);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
/* allocate extended descriptor */
edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN *
- CAAM_CMD_SZ, &all_contig);
+ CAAM_CMD_SZ, &all_contig, false);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
src_nents = sg_count(req->src, req->cryptlen, &src_chained);
if (unlikely(req->dst != req->src))
- dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained);
+ dst_nents = sg_count(req->dst, req->cryptlen + ctx->authsize,
+ &dst_chained);
sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1,
DMA_TO_DEVICE, assoc_chained);
u32 *desc;
int ret = 0;
- req->cryptlen += ctx->authsize;
-
/* allocate extended descriptor */
edesc = aead_giv_edesc_alloc(areq, DESC_JOB_IO_LEN *
CAAM_CMD_SZ, &contig);
struct caam_crypto_alg {
struct list_head entry;
- struct device *ctrldev;
int class1_alg_type;
int class2_alg_type;
int alg_op;
struct caam_crypto_alg *caam_alg =
container_of(alg, struct caam_crypto_alg, crypto_alg);
struct caam_ctx *ctx = crypto_tfm_ctx(tfm);
- struct caam_drv_private *priv = dev_get_drvdata(caam_alg->ctrldev);
- int tgt_jr = atomic_inc_return(&priv->tfm_count);
- /*
- * distribute tfms across job rings to ensure in-order
- * crypto request processing per tfm
- */
- ctx->jrdev = priv->jrdev[(tgt_jr / 2) % priv->total_jobrs];
+ ctx->jrdev = caam_jr_alloc();
+ if (IS_ERR(ctx->jrdev)) {
+ pr_err("Job Ring Device allocation for transform failed\n");
+ return PTR_ERR(ctx->jrdev);
+ }
/* copy descriptor header template value */
ctx->class1_alg_type = OP_TYPE_CLASS1_ALG | caam_alg->class1_alg_type;
dma_unmap_single(ctx->jrdev, ctx->sh_desc_givenc_dma,
desc_bytes(ctx->sh_desc_givenc),
DMA_TO_DEVICE);
+
+ caam_jr_free(ctx->jrdev);
}
static void __exit caam_algapi_exit(void)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
struct caam_crypto_alg *t_alg, *n;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev)
- return;
-
- ctrldev = &pdev->dev;
- of_node_put(dev_node);
- priv = dev_get_drvdata(ctrldev);
-
- if (!priv->alg_list.next)
+ if (!alg_list.next)
return;
- list_for_each_entry_safe(t_alg, n, &priv->alg_list, entry) {
+ list_for_each_entry_safe(t_alg, n, &alg_list, entry) {
crypto_unregister_alg(&t_alg->crypto_alg);
list_del(&t_alg->entry);
kfree(t_alg);
}
}
-static struct caam_crypto_alg *caam_alg_alloc(struct device *ctrldev,
- struct caam_alg_template
+static struct caam_crypto_alg *caam_alg_alloc(struct caam_alg_template
*template)
{
struct caam_crypto_alg *t_alg;
t_alg = kzalloc(sizeof(struct caam_crypto_alg), GFP_KERNEL);
if (!t_alg) {
- dev_err(ctrldev, "failed to allocate t_alg\n");
+ pr_err("failed to allocate t_alg\n");
return ERR_PTR(-ENOMEM);
}
t_alg->class1_alg_type = template->class1_alg_type;
t_alg->class2_alg_type = template->class2_alg_type;
t_alg->alg_op = template->alg_op;
- t_alg->ctrldev = ctrldev;
return t_alg;
}
static int __init caam_algapi_init(void)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
int i = 0, err = 0;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev)
- return -ENODEV;
-
- ctrldev = &pdev->dev;
- priv = dev_get_drvdata(ctrldev);
- of_node_put(dev_node);
-
- INIT_LIST_HEAD(&priv->alg_list);
-
- atomic_set(&priv->tfm_count, -1);
+ INIT_LIST_HEAD(&alg_list);
/* register crypto algorithms the device supports */
for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
/* TODO: check if h/w supports alg */
struct caam_crypto_alg *t_alg;
- t_alg = caam_alg_alloc(ctrldev, &driver_algs[i]);
+ t_alg = caam_alg_alloc(&driver_algs[i]);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
- dev_warn(ctrldev, "%s alg allocation failed\n",
- driver_algs[i].driver_name);
+ pr_warn("%s alg allocation failed\n",
+ driver_algs[i].driver_name);
continue;
}
err = crypto_register_alg(&t_alg->crypto_alg);
if (err) {
- dev_warn(ctrldev, "%s alg registration failed\n",
+ pr_warn("%s alg registration failed\n",
t_alg->crypto_alg.cra_driver_name);
kfree(t_alg);
} else
- list_add_tail(&t_alg->entry, &priv->alg_list);
+ list_add_tail(&t_alg->entry, &alg_list);
}
- if (!list_empty(&priv->alg_list))
- dev_info(ctrldev, "%s algorithms registered in /proc/crypto\n",
- (char *)of_get_property(dev_node, "compatible", NULL));
+ if (!list_empty(&alg_list))
+ pr_info("caam algorithms registered in /proc/crypto\n");
return err;
}
#define debug(format, arg...)
#endif
+
+static struct list_head hash_list;
+
/* ahash per-session context */
struct caam_hash_ctx {
struct device *jrdev;
struct caam_hash_alg {
struct list_head entry;
- struct device *ctrldev;
int alg_type;
int alg_op;
struct ahash_alg ahash_alg;
struct caam_hash_alg *caam_hash =
container_of(alg, struct caam_hash_alg, ahash_alg);
struct caam_hash_ctx *ctx = crypto_tfm_ctx(tfm);
- struct caam_drv_private *priv = dev_get_drvdata(caam_hash->ctrldev);
/* Sizes for MDHA running digests: MD5, SHA1, 224, 256, 384, 512 */
static const u8 runninglen[] = { HASH_MSG_LEN + MD5_DIGEST_SIZE,
HASH_MSG_LEN + SHA1_DIGEST_SIZE,
HASH_MSG_LEN + SHA256_DIGEST_SIZE,
HASH_MSG_LEN + 64,
HASH_MSG_LEN + SHA512_DIGEST_SIZE };
- int tgt_jr = atomic_inc_return(&priv->tfm_count);
int ret = 0;
/*
- * distribute tfms across job rings to ensure in-order
+ * Get a Job ring from Job Ring driver to ensure in-order
* crypto request processing per tfm
*/
- ctx->jrdev = priv->jrdev[tgt_jr % priv->total_jobrs];
-
+ ctx->jrdev = caam_jr_alloc();
+ if (IS_ERR(ctx->jrdev)) {
+ pr_err("Job Ring Device allocation for transform failed\n");
+ return PTR_ERR(ctx->jrdev);
+ }
/* copy descriptor header template value */
ctx->alg_type = OP_TYPE_CLASS2_ALG | caam_hash->alg_type;
ctx->alg_op = OP_TYPE_CLASS2_ALG | caam_hash->alg_op;
!dma_mapping_error(ctx->jrdev, ctx->sh_desc_finup_dma))
dma_unmap_single(ctx->jrdev, ctx->sh_desc_finup_dma,
desc_bytes(ctx->sh_desc_finup), DMA_TO_DEVICE);
+
+ caam_jr_free(ctx->jrdev);
}
static void __exit caam_algapi_hash_exit(void)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
struct caam_hash_alg *t_alg, *n;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev)
+ if (!hash_list.next)
return;
- ctrldev = &pdev->dev;
- of_node_put(dev_node);
- priv = dev_get_drvdata(ctrldev);
-
- if (!priv->hash_list.next)
- return;
-
- list_for_each_entry_safe(t_alg, n, &priv->hash_list, entry) {
+ list_for_each_entry_safe(t_alg, n, &hash_list, entry) {
crypto_unregister_ahash(&t_alg->ahash_alg);
list_del(&t_alg->entry);
kfree(t_alg);
}
static struct caam_hash_alg *
-caam_hash_alloc(struct device *ctrldev, struct caam_hash_template *template,
+caam_hash_alloc(struct caam_hash_template *template,
bool keyed)
{
struct caam_hash_alg *t_alg;
t_alg = kzalloc(sizeof(struct caam_hash_alg), GFP_KERNEL);
if (!t_alg) {
- dev_err(ctrldev, "failed to allocate t_alg\n");
+ pr_err("failed to allocate t_alg\n");
return ERR_PTR(-ENOMEM);
}
t_alg->alg_type = template->alg_type;
t_alg->alg_op = template->alg_op;
- t_alg->ctrldev = ctrldev;
return t_alg;
}
static int __init caam_algapi_hash_init(void)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
int i = 0, err = 0;
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev)
- return -ENODEV;
-
- ctrldev = &pdev->dev;
- priv = dev_get_drvdata(ctrldev);
- of_node_put(dev_node);
-
- INIT_LIST_HEAD(&priv->hash_list);
-
- atomic_set(&priv->tfm_count, -1);
+ INIT_LIST_HEAD(&hash_list);
/* register crypto algorithms the device supports */
for (i = 0; i < ARRAY_SIZE(driver_hash); i++) {
struct caam_hash_alg *t_alg;
/* register hmac version */
- t_alg = caam_hash_alloc(ctrldev, &driver_hash[i], true);
+ t_alg = caam_hash_alloc(&driver_hash[i], true);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
- dev_warn(ctrldev, "%s alg allocation failed\n",
- driver_hash[i].driver_name);
+ pr_warn("%s alg allocation failed\n",
+ driver_hash[i].driver_name);
continue;
}
err = crypto_register_ahash(&t_alg->ahash_alg);
if (err) {
- dev_warn(ctrldev, "%s alg registration failed\n",
+ pr_warn("%s alg registration failed\n",
t_alg->ahash_alg.halg.base.cra_driver_name);
kfree(t_alg);
} else
- list_add_tail(&t_alg->entry, &priv->hash_list);
+ list_add_tail(&t_alg->entry, &hash_list);
/* register unkeyed version */
- t_alg = caam_hash_alloc(ctrldev, &driver_hash[i], false);
+ t_alg = caam_hash_alloc(&driver_hash[i], false);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
- dev_warn(ctrldev, "%s alg allocation failed\n",
- driver_hash[i].driver_name);
+ pr_warn("%s alg allocation failed\n",
+ driver_hash[i].driver_name);
continue;
}
err = crypto_register_ahash(&t_alg->ahash_alg);
if (err) {
- dev_warn(ctrldev, "%s alg registration failed\n",
+ pr_warn("%s alg registration failed\n",
t_alg->ahash_alg.halg.base.cra_driver_name);
kfree(t_alg);
} else
- list_add_tail(&t_alg->entry, &priv->hash_list);
+ list_add_tail(&t_alg->entry, &hash_list);
}
return err;
static void __exit caam_rng_exit(void)
{
+ caam_jr_free(rng_ctx.jrdev);
hwrng_unregister(&caam_rng);
}
static int __init caam_rng_init(void)
{
- struct device_node *dev_node;
- struct platform_device *pdev;
- struct device *ctrldev;
- struct caam_drv_private *priv;
-
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0");
- if (!dev_node) {
- dev_node = of_find_compatible_node(NULL, NULL, "fsl,sec4.0");
- if (!dev_node)
- return -ENODEV;
- }
-
- pdev = of_find_device_by_node(dev_node);
- if (!pdev)
- return -ENODEV;
+ struct device *dev;
- ctrldev = &pdev->dev;
- priv = dev_get_drvdata(ctrldev);
- of_node_put(dev_node);
+ dev = caam_jr_alloc();
+ if (IS_ERR(dev)) {
+ pr_err("Job Ring Device allocation for transform failed\n");
+ return PTR_ERR(dev);
+ }
- caam_init_rng(&rng_ctx, priv->jrdev[0]);
+ caam_init_rng(&rng_ctx, dev);
- dev_info(priv->jrdev[0], "registering rng-caam\n");
+ dev_info(dev, "registering rng-caam\n");
return hwrng_register(&caam_rng);
}
#include "error.h"
#include "ctrl.h"
-static int caam_remove(struct platform_device *pdev)
-{
- struct device *ctrldev;
- struct caam_drv_private *ctrlpriv;
- struct caam_drv_private_jr *jrpriv;
- struct caam_full __iomem *topregs;
- int ring, ret = 0;
-
- ctrldev = &pdev->dev;
- ctrlpriv = dev_get_drvdata(ctrldev);
- topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
-
- /* shut down JobRs */
- for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) {
- ret |= caam_jr_shutdown(ctrlpriv->jrdev[ring]);
- jrpriv = dev_get_drvdata(ctrlpriv->jrdev[ring]);
- irq_dispose_mapping(jrpriv->irq);
- }
-
- /* Shut down debug views */
-#ifdef CONFIG_DEBUG_FS
- debugfs_remove_recursive(ctrlpriv->dfs_root);
-#endif
-
- /* Unmap controller region */
- iounmap(&topregs->ctrl);
-
- kfree(ctrlpriv->jrdev);
- kfree(ctrlpriv);
-
- return ret;
-}
-
/*
* Descriptor to instantiate RNG State Handle 0 in normal mode and
* load the JDKEK, TDKEK and TDSK registers
*/
-static void build_instantiation_desc(u32 *desc)
+static void build_instantiation_desc(u32 *desc, int handle, int do_sk)
{
- u32 *jump_cmd;
+ u32 *jump_cmd, op_flags;
init_job_desc(desc, 0);
+ op_flags = OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
+ (handle << OP_ALG_AAI_SHIFT) | OP_ALG_AS_INIT;
+
/* INIT RNG in non-test mode */
- append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
- OP_ALG_AS_INIT);
+ append_operation(desc, op_flags);
+
+ if (!handle && do_sk) {
+ /*
+ * For SH0, Secure Keys must be generated as well
+ */
+
+ /* wait for done */
+ jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1);
+ set_jump_tgt_here(desc, jump_cmd);
+
+ /*
+ * load 1 to clear written reg:
+ * resets the done interrrupt and returns the RNG to idle.
+ */
+ append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW);
+
+ /* Initialize State Handle */
+ append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
+ OP_ALG_AAI_RNG4_SK);
+ }
- /* wait for done */
- jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1);
- set_jump_tgt_here(desc, jump_cmd);
+ append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT);
+}
- /*
- * load 1 to clear written reg:
- * resets the done interrupt and returns the RNG to idle.
- */
- append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW);
+/* Descriptor for deinstantiation of State Handle 0 of the RNG block. */
+static void build_deinstantiation_desc(u32 *desc, int handle)
+{
+ init_job_desc(desc, 0);
- /* generate secure keys (non-test) */
+ /* Uninstantiate State Handle 0 */
append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG |
- OP_ALG_RNG4_SK);
+ (handle << OP_ALG_AAI_SHIFT) | OP_ALG_AS_INITFINAL);
+
+ append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT);
}
-static int instantiate_rng(struct device *ctrldev)
+/*
+ * run_descriptor_deco0 - runs a descriptor on DECO0, under direct control of
+ * the software (no JR/QI used).
+ * @ctrldev - pointer to device
+ * @status - descriptor status, after being run
+ *
+ * Return: - 0 if no error occurred
+ * - -ENODEV if the DECO couldn't be acquired
+ * - -EAGAIN if an error occurred while executing the descriptor
+ */
+static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc,
+ u32 *status)
{
struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
struct caam_full __iomem *topregs;
unsigned int timeout = 100000;
- u32 *desc;
- int i, ret = 0;
-
- desc = kmalloc(CAAM_CMD_SZ * 6, GFP_KERNEL | GFP_DMA);
- if (!desc) {
- dev_err(ctrldev, "can't allocate RNG init descriptor memory\n");
- return -ENOMEM;
- }
- build_instantiation_desc(desc);
+ u32 deco_dbg_reg, flags;
+ int i;
/* Set the bit to request direct access to DECO0 */
topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
if (!timeout) {
dev_err(ctrldev, "failed to acquire DECO 0\n");
- ret = -EIO;
- goto out;
+ clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE);
+ return -ENODEV;
}
for (i = 0; i < desc_len(desc); i++)
- topregs->deco.descbuf[i] = *(desc + i);
+ wr_reg32(&topregs->deco.descbuf[i], *(desc + i));
+
+ flags = DECO_JQCR_WHL;
+ /*
+ * If the descriptor length is longer than 4 words, then the
+ * FOUR bit in JRCTRL register must be set.
+ */
+ if (desc_len(desc) >= 4)
+ flags |= DECO_JQCR_FOUR;
- wr_reg32(&topregs->deco.jr_ctl_hi, DECO_JQCR_WHL | DECO_JQCR_FOUR);
+ /* Instruct the DECO to execute it */
+ wr_reg32(&topregs->deco.jr_ctl_hi, flags);
timeout = 10000000;
- while ((rd_reg32(&topregs->deco.desc_dbg) & DECO_DBG_VALID) &&
- --timeout)
+ do {
+ deco_dbg_reg = rd_reg32(&topregs->deco.desc_dbg);
+ /*
+ * If an error occured in the descriptor, then
+ * the DECO status field will be set to 0x0D
+ */
+ if ((deco_dbg_reg & DESC_DBG_DECO_STAT_MASK) ==
+ DESC_DBG_DECO_STAT_HOST_ERR)
+ break;
cpu_relax();
+ } while ((deco_dbg_reg & DESC_DBG_DECO_STAT_VALID) && --timeout);
- if (!timeout) {
- dev_err(ctrldev, "failed to instantiate RNG\n");
- ret = -EIO;
- }
+ *status = rd_reg32(&topregs->deco.op_status_hi) &
+ DECO_OP_STATUS_HI_ERR_MASK;
+ /* Mark the DECO as free */
clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE);
-out:
+
+ if (!timeout)
+ return -EAGAIN;
+
+ return 0;
+}
+
+/*
+ * instantiate_rng - builds and executes a descriptor on DECO0,
+ * which initializes the RNG block.
+ * @ctrldev - pointer to device
+ * @state_handle_mask - bitmask containing the instantiation status
+ * for the RNG4 state handles which exist in
+ * the RNG4 block: 1 if it's been instantiated
+ * by an external entry, 0 otherwise.
+ * @gen_sk - generate data to be loaded into the JDKEK, TDKEK and TDSK;
+ * Caution: this can be done only once; if the keys need to be
+ * regenerated, a POR is required
+ *
+ * Return: - 0 if no error occurred
+ * - -ENOMEM if there isn't enough memory to allocate the descriptor
+ * - -ENODEV if DECO0 couldn't be acquired
+ * - -EAGAIN if an error occurred when executing the descriptor
+ * f.i. there was a RNG hardware error due to not "good enough"
+ * entropy being aquired.
+ */
+static int instantiate_rng(struct device *ctrldev, int state_handle_mask,
+ int gen_sk)
+{
+ struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
+ struct caam_full __iomem *topregs;
+ struct rng4tst __iomem *r4tst;
+ u32 *desc, status, rdsta_val;
+ int ret = 0, sh_idx;
+
+ topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
+ r4tst = &topregs->ctrl.r4tst[0];
+
+ desc = kmalloc(CAAM_CMD_SZ * 7, GFP_KERNEL);
+ if (!desc)
+ return -ENOMEM;
+
+ for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) {
+ /*
+ * If the corresponding bit is set, this state handle
+ * was initialized by somebody else, so it's left alone.
+ */
+ if ((1 << sh_idx) & state_handle_mask)
+ continue;
+
+ /* Create the descriptor for instantiating RNG State Handle */
+ build_instantiation_desc(desc, sh_idx, gen_sk);
+
+ /* Try to run it through DECO0 */
+ ret = run_descriptor_deco0(ctrldev, desc, &status);
+
+ /*
+ * If ret is not 0, or descriptor status is not 0, then
+ * something went wrong. No need to try the next state
+ * handle (if available), bail out here.
+ * Also, if for some reason, the State Handle didn't get
+ * instantiated although the descriptor has finished
+ * without any error (HW optimizations for later
+ * CAAM eras), then try again.
+ */
+ rdsta_val =
+ rd_reg32(&topregs->ctrl.r4tst[0].rdsta) & RDSTA_IFMASK;
+ if (status || !(rdsta_val & (1 << sh_idx)))
+ ret = -EAGAIN;
+ if (ret)
+ break;
+
+ dev_info(ctrldev, "Instantiated RNG4 SH%d\n", sh_idx);
+ /* Clear the contents before recreating the descriptor */
+ memset(desc, 0x00, CAAM_CMD_SZ * 7);
+ }
+
kfree(desc);
+
return ret;
}
/*
- * By default, the TRNG runs for 200 clocks per sample;
- * 1600 clocks per sample generates better entropy.
+ * deinstantiate_rng - builds and executes a descriptor on DECO0,
+ * which deinitializes the RNG block.
+ * @ctrldev - pointer to device
+ * @state_handle_mask - bitmask containing the instantiation status
+ * for the RNG4 state handles which exist in
+ * the RNG4 block: 1 if it's been instantiated
+ *
+ * Return: - 0 if no error occurred
+ * - -ENOMEM if there isn't enough memory to allocate the descriptor
+ * - -ENODEV if DECO0 couldn't be acquired
+ * - -EAGAIN if an error occurred when executing the descriptor
*/
-static void kick_trng(struct platform_device *pdev)
+static int deinstantiate_rng(struct device *ctrldev, int state_handle_mask)
+{
+ u32 *desc, status;
+ int sh_idx, ret = 0;
+
+ desc = kmalloc(CAAM_CMD_SZ * 3, GFP_KERNEL);
+ if (!desc)
+ return -ENOMEM;
+
+ for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) {
+ /*
+ * If the corresponding bit is set, then it means the state
+ * handle was initialized by us, and thus it needs to be
+ * deintialized as well
+ */
+ if ((1 << sh_idx) & state_handle_mask) {
+ /*
+ * Create the descriptor for deinstantating this state
+ * handle
+ */
+ build_deinstantiation_desc(desc, sh_idx);
+
+ /* Try to run it through DECO0 */
+ ret = run_descriptor_deco0(ctrldev, desc, &status);
+
+ if (ret || status) {
+ dev_err(ctrldev,
+ "Failed to deinstantiate RNG4 SH%d\n",
+ sh_idx);
+ break;
+ }
+ dev_info(ctrldev, "Deinstantiated RNG4 SH%d\n", sh_idx);
+ }
+ }
+
+ kfree(desc);
+
+ return ret;
+}
+
+static int caam_remove(struct platform_device *pdev)
+{
+ struct device *ctrldev;
+ struct caam_drv_private *ctrlpriv;
+ struct caam_full __iomem *topregs;
+ int ring, ret = 0;
+
+ ctrldev = &pdev->dev;
+ ctrlpriv = dev_get_drvdata(ctrldev);
+ topregs = (struct caam_full __iomem *)ctrlpriv->ctrl;
+
+ /* Remove platform devices for JobRs */
+ for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) {
+ if (ctrlpriv->jrpdev[ring])
+ of_device_unregister(ctrlpriv->jrpdev[ring]);
+ }
+
+ /* De-initialize RNG state handles initialized by this driver. */
+ if (ctrlpriv->rng4_sh_init)
+ deinstantiate_rng(ctrldev, ctrlpriv->rng4_sh_init);
+
+ /* Shut down debug views */
+#ifdef CONFIG_DEBUG_FS
+ debugfs_remove_recursive(ctrlpriv->dfs_root);
+#endif
+
+ /* Unmap controller region */
+ iounmap(&topregs->ctrl);
+
+ kfree(ctrlpriv->jrpdev);
+ kfree(ctrlpriv);
+
+ return ret;
+}
+
+/*
+ * kick_trng - sets the various parameters for enabling the initialization
+ * of the RNG4 block in CAAM
+ * @pdev - pointer to the platform device
+ * @ent_delay - Defines the length (in system clocks) of each entropy sample.
+ */
+static void kick_trng(struct platform_device *pdev, int ent_delay)
{
struct device *ctrldev = &pdev->dev;
struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev);
/* put RNG4 into program mode */
setbits32(&r4tst->rtmctl, RTMCTL_PRGM);
- /* 1600 clocks per sample */
+
+ /*
+ * Performance-wise, it does not make sense to
+ * set the delay to a value that is lower
+ * than the last one that worked (i.e. the state handles
+ * were instantiated properly. Thus, instead of wasting
+ * time trying to set the values controlling the sample
+ * frequency, the function simply returns.
+ */
+ val = (rd_reg32(&r4tst->rtsdctl) & RTSDCTL_ENT_DLY_MASK)
+ >> RTSDCTL_ENT_DLY_SHIFT;
+ if (ent_delay <= val) {
+ /* put RNG4 into run mode */
+ clrbits32(&r4tst->rtmctl, RTMCTL_PRGM);
+ return;
+ }
+
val = rd_reg32(&r4tst->rtsdctl);
- val = (val & ~RTSDCTL_ENT_DLY_MASK) | (1600 << RTSDCTL_ENT_DLY_SHIFT);
+ val = (val & ~RTSDCTL_ENT_DLY_MASK) |
+ (ent_delay << RTSDCTL_ENT_DLY_SHIFT);
wr_reg32(&r4tst->rtsdctl, val);
- /* min. freq. count */
- wr_reg32(&r4tst->rtfrqmin, 400);
- /* max. freq. count */
- wr_reg32(&r4tst->rtfrqmax, 6400);
+ /* min. freq. count, equal to 1/4 of the entropy sample length */
+ wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
+ /* max. freq. count, equal to 8 times the entropy sample length */
+ wr_reg32(&r4tst->rtfrqmax, ent_delay << 3);
/* put RNG4 into run mode */
clrbits32(&r4tst->rtmctl, RTMCTL_PRGM);
}
/* Probe routine for CAAM top (controller) level */
static int caam_probe(struct platform_device *pdev)
{
- int ret, ring, rspec;
+ int ret, ring, rspec, gen_sk, ent_delay = RTSDCTL_ENT_DLY_MIN;
u64 caam_id;
struct device *dev;
struct device_node *nprop, *np;
rspec++;
}
- ctrlpriv->jrdev = kzalloc(sizeof(struct device *) * rspec, GFP_KERNEL);
- if (ctrlpriv->jrdev == NULL) {
+ ctrlpriv->jrpdev = kzalloc(sizeof(struct platform_device *) * rspec,
+ GFP_KERNEL);
+ if (ctrlpriv->jrpdev == NULL) {
iounmap(&topregs->ctrl);
return -ENOMEM;
}
ring = 0;
ctrlpriv->total_jobrs = 0;
for_each_compatible_node(np, NULL, "fsl,sec-v4.0-job-ring") {
- caam_jr_probe(pdev, np, ring);
+ ctrlpriv->jrpdev[ring] =
+ of_platform_device_create(np, NULL, dev);
+ if (!ctrlpriv->jrpdev[ring]) {
+ pr_warn("JR%d Platform device creation error\n", ring);
+ continue;
+ }
ctrlpriv->total_jobrs++;
ring++;
}
if (!ring) {
for_each_compatible_node(np, NULL, "fsl,sec4.0-job-ring") {
- caam_jr_probe(pdev, np, ring);
+ ctrlpriv->jrpdev[ring] =
+ of_platform_device_create(np, NULL, dev);
+ if (!ctrlpriv->jrpdev[ring]) {
+ pr_warn("JR%d Platform device creation error\n",
+ ring);
+ continue;
+ }
ctrlpriv->total_jobrs++;
ring++;
}
/*
* If SEC has RNG version >= 4 and RNG state handle has not been
- * already instantiated ,do RNG instantiation
+ * already instantiated, do RNG instantiation
*/
- if ((cha_vid & CHA_ID_RNG_MASK) >> CHA_ID_RNG_SHIFT >= 4 &&
- !(rd_reg32(&topregs->ctrl.r4tst[0].rdsta) & RDSTA_IF0)) {
- kick_trng(pdev);
- ret = instantiate_rng(dev);
+ if ((cha_vid & CHA_ID_RNG_MASK) >> CHA_ID_RNG_SHIFT >= 4) {
+ ctrlpriv->rng4_sh_init =
+ rd_reg32(&topregs->ctrl.r4tst[0].rdsta);
+ /*
+ * If the secure keys (TDKEK, JDKEK, TDSK), were already
+ * generated, signal this to the function that is instantiating
+ * the state handles. An error would occur if RNG4 attempts
+ * to regenerate these keys before the next POR.
+ */
+ gen_sk = ctrlpriv->rng4_sh_init & RDSTA_SKVN ? 0 : 1;
+ ctrlpriv->rng4_sh_init &= RDSTA_IFMASK;
+ do {
+ int inst_handles =
+ rd_reg32(&topregs->ctrl.r4tst[0].rdsta) &
+ RDSTA_IFMASK;
+ /*
+ * If either SH were instantiated by somebody else
+ * (e.g. u-boot) then it is assumed that the entropy
+ * parameters are properly set and thus the function
+ * setting these (kick_trng(...)) is skipped.
+ * Also, if a handle was instantiated, do not change
+ * the TRNG parameters.
+ */
+ if (!(ctrlpriv->rng4_sh_init || inst_handles)) {
+ kick_trng(pdev, ent_delay);
+ ent_delay += 400;
+ }
+ /*
+ * if instantiate_rng(...) fails, the loop will rerun
+ * and the kick_trng(...) function will modfiy the
+ * upper and lower limits of the entropy sampling
+ * interval, leading to a sucessful initialization of
+ * the RNG.
+ */
+ ret = instantiate_rng(dev, inst_handles,
+ gen_sk);
+ } while ((ret == -EAGAIN) && (ent_delay < RTSDCTL_ENT_DLY_MAX));
if (ret) {
+ dev_err(dev, "failed to instantiate RNG");
caam_remove(pdev);
return ret;
}
+ /*
+ * Set handles init'ed by this module as the complement of the
+ * already initialized ones
+ */
+ ctrlpriv->rng4_sh_init = ~ctrlpriv->rng4_sh_init & RDSTA_IFMASK;
/* Enable RDB bit so that RNG works faster */
setbits32(&topregs->ctrl.scfgr, SCFGR_RDBENABLE);
/* randomizer AAI set */
#define OP_ALG_AAI_RNG (0x00 << OP_ALG_AAI_SHIFT)
-#define OP_ALG_AAI_RNG_NOZERO (0x10 << OP_ALG_AAI_SHIFT)
-#define OP_ALG_AAI_RNG_ODD (0x20 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG_NZB (0x10 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG_OBP (0x20 << OP_ALG_AAI_SHIFT)
+
+/* RNG4 AAI set */
+#define OP_ALG_AAI_RNG4_SH_0 (0x00 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_SH_1 (0x01 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_PS (0x40 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_AI (0x80 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_SK (0x100 << OP_ALG_AAI_SHIFT)
/* hmac/smac AAI set */
#define OP_ALG_AAI_HASH (0x00 << OP_ALG_AAI_SHIFT)
#define OP_ALG_AAI_GSM (0x10 << OP_ALG_AAI_SHIFT)
#define OP_ALG_AAI_EDGE (0x20 << OP_ALG_AAI_SHIFT)
-/* RNG4 set */
-#define OP_ALG_RNG4_SHIFT 4
-#define OP_ALG_RNG4_MASK (0x1f3 << OP_ALG_RNG4_SHIFT)
-
-#define OP_ALG_RNG4_SK (0x100 << OP_ALG_RNG4_SHIFT)
-
#define OP_ALG_AS_SHIFT 2
#define OP_ALG_AS_MASK (0x3 << OP_ALG_AS_SHIFT)
#define OP_ALG_AS_UPDATE (0 << OP_ALG_AS_SHIFT)
/* Private sub-storage for a single JobR */
struct caam_drv_private_jr {
- struct device *parentdev; /* points back to controller dev */
- struct platform_device *jr_pdev;/* points to platform device for JR */
+ struct list_head list_node; /* Job Ring device list */
+ struct device *dev;
int ridx;
struct caam_job_ring __iomem *rregs; /* JobR's register space */
struct tasklet_struct irqtask;
int irq; /* One per queue */
+ /* Number of scatterlist crypt transforms active on the JobR */
+ atomic_t tfm_count ____cacheline_aligned;
+
/* Job ring info */
int ringsize; /* Size of rings (assume input = output) */
struct caam_jrentry_info *entinfo; /* Alloc'ed 1 per ring entry */
struct caam_drv_private {
struct device *dev;
- struct device **jrdev; /* Alloc'ed array per sub-device */
+ struct platform_device **jrpdev; /* Alloc'ed array per sub-device */
struct platform_device *pdev;
/* Physical-presence section */
u8 qi_present; /* Nonzero if QI present in device */
int secvio_irq; /* Security violation interrupt number */
- /* which jr allocated to scatterlist crypto */
- atomic_t tfm_count ____cacheline_aligned;
- /* list of registered crypto algorithms (mk generic context handle?) */
- struct list_head alg_list;
- /* list of registered hash algorithms (mk generic context handle?) */
- struct list_head hash_list;
+#define RNG4_MAX_HANDLES 2
+ /* RNG4 block */
+ u32 rng4_sh_init; /* This bitmap shows which of the State
+ Handles of the RNG4 block are initialized
+ by this driver */
/*
* debugfs entries for developer view into driver/device
*/
#include <linux/of_irq.h>
+#include <linux/of_address.h>
#include "compat.h"
#include "regs.h"
#include "desc.h"
#include "intern.h"
+struct jr_driver_data {
+ /* List of Physical JobR's with the Driver */
+ struct list_head jr_list;
+ spinlock_t jr_alloc_lock; /* jr_list lock */
+} ____cacheline_aligned;
+
+static struct jr_driver_data driver_data;
+
+static int caam_reset_hw_jr(struct device *dev)
+{
+ struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+ unsigned int timeout = 100000;
+
+ /*
+ * mask interrupts since we are going to poll
+ * for reset completion status
+ */
+ setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
+
+ /* initiate flush (required prior to reset) */
+ wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
+ while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) ==
+ JRINT_ERR_HALT_INPROGRESS) && --timeout)
+ cpu_relax();
+
+ if ((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) !=
+ JRINT_ERR_HALT_COMPLETE || timeout == 0) {
+ dev_err(dev, "failed to flush job ring %d\n", jrp->ridx);
+ return -EIO;
+ }
+
+ /* initiate reset */
+ timeout = 100000;
+ wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
+ while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout)
+ cpu_relax();
+
+ if (timeout == 0) {
+ dev_err(dev, "failed to reset job ring %d\n", jrp->ridx);
+ return -EIO;
+ }
+
+ /* unmask interrupts */
+ clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
+
+ return 0;
+}
+
+/*
+ * Shutdown JobR independent of platform property code
+ */
+int caam_jr_shutdown(struct device *dev)
+{
+ struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
+ dma_addr_t inpbusaddr, outbusaddr;
+ int ret;
+
+ ret = caam_reset_hw_jr(dev);
+
+ tasklet_kill(&jrp->irqtask);
+
+ /* Release interrupt */
+ free_irq(jrp->irq, dev);
+
+ /* Free rings */
+ inpbusaddr = rd_reg64(&jrp->rregs->inpring_base);
+ outbusaddr = rd_reg64(&jrp->rregs->outring_base);
+ dma_free_coherent(dev, sizeof(dma_addr_t) * JOBR_DEPTH,
+ jrp->inpring, inpbusaddr);
+ dma_free_coherent(dev, sizeof(struct jr_outentry) * JOBR_DEPTH,
+ jrp->outring, outbusaddr);
+ kfree(jrp->entinfo);
+
+ return ret;
+}
+
+static int caam_jr_remove(struct platform_device *pdev)
+{
+ int ret;
+ struct device *jrdev;
+ struct caam_drv_private_jr *jrpriv;
+
+ jrdev = &pdev->dev;
+ jrpriv = dev_get_drvdata(jrdev);
+
+ /*
+ * Return EBUSY if job ring already allocated.
+ */
+ if (atomic_read(&jrpriv->tfm_count)) {
+ dev_err(jrdev, "Device is busy\n");
+ return -EBUSY;
+ }
+
+ /* Remove the node from Physical JobR list maintained by driver */
+ spin_lock(&driver_data.jr_alloc_lock);
+ list_del(&jrpriv->list_node);
+ spin_unlock(&driver_data.jr_alloc_lock);
+
+ /* Release ring */
+ ret = caam_jr_shutdown(jrdev);
+ if (ret)
+ dev_err(jrdev, "Failed to shut down job ring\n");
+ irq_dispose_mapping(jrpriv->irq);
+
+ return ret;
+}
+
/* Main per-ring interrupt handler */
static irqreturn_t caam_jr_interrupt(int irq, void *st_dev)
{
clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
}
+/**
+ * caam_jr_alloc() - Alloc a job ring for someone to use as needed.
+ *
+ * returns : pointer to the newly allocated physical
+ * JobR dev can be written to if successful.
+ **/
+struct device *caam_jr_alloc(void)
+{
+ struct caam_drv_private_jr *jrpriv, *min_jrpriv = NULL;
+ struct device *dev = NULL;
+ int min_tfm_cnt = INT_MAX;
+ int tfm_cnt;
+
+ spin_lock(&driver_data.jr_alloc_lock);
+
+ if (list_empty(&driver_data.jr_list)) {
+ spin_unlock(&driver_data.jr_alloc_lock);
+ return ERR_PTR(-ENODEV);
+ }
+
+ list_for_each_entry(jrpriv, &driver_data.jr_list, list_node) {
+ tfm_cnt = atomic_read(&jrpriv->tfm_count);
+ if (tfm_cnt < min_tfm_cnt) {
+ min_tfm_cnt = tfm_cnt;
+ min_jrpriv = jrpriv;
+ }
+ if (!min_tfm_cnt)
+ break;
+ }
+
+ if (min_jrpriv) {
+ atomic_inc(&min_jrpriv->tfm_count);
+ dev = min_jrpriv->dev;
+ }
+ spin_unlock(&driver_data.jr_alloc_lock);
+
+ return dev;
+}
+EXPORT_SYMBOL(caam_jr_alloc);
+
+/**
+ * caam_jr_free() - Free the Job Ring
+ * @rdev - points to the dev that identifies the Job ring to
+ * be released.
+ **/
+void caam_jr_free(struct device *rdev)
+{
+ struct caam_drv_private_jr *jrpriv = dev_get_drvdata(rdev);
+
+ atomic_dec(&jrpriv->tfm_count);
+}
+EXPORT_SYMBOL(caam_jr_free);
+
/**
* caam_jr_enqueue() - Enqueue a job descriptor head. Returns 0 if OK,
* -EBUSY if the queue is full, -EIO if it cannot map the caller's
}
EXPORT_SYMBOL(caam_jr_enqueue);
-static int caam_reset_hw_jr(struct device *dev)
-{
- struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
- unsigned int timeout = 100000;
-
- /*
- * mask interrupts since we are going to poll
- * for reset completion status
- */
- setbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
-
- /* initiate flush (required prior to reset) */
- wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
- while (((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) ==
- JRINT_ERR_HALT_INPROGRESS) && --timeout)
- cpu_relax();
-
- if ((rd_reg32(&jrp->rregs->jrintstatus) & JRINT_ERR_HALT_MASK) !=
- JRINT_ERR_HALT_COMPLETE || timeout == 0) {
- dev_err(dev, "failed to flush job ring %d\n", jrp->ridx);
- return -EIO;
- }
-
- /* initiate reset */
- timeout = 100000;
- wr_reg32(&jrp->rregs->jrcommand, JRCR_RESET);
- while ((rd_reg32(&jrp->rregs->jrcommand) & JRCR_RESET) && --timeout)
- cpu_relax();
-
- if (timeout == 0) {
- dev_err(dev, "failed to reset job ring %d\n", jrp->ridx);
- return -EIO;
- }
-
- /* unmask interrupts */
- clrbits32(&jrp->rregs->rconfig_lo, JRCFG_IMSK);
-
- return 0;
-}
-
/*
* Init JobR independent of platform property detection
*/
/* Connect job ring interrupt handler. */
error = request_irq(jrp->irq, caam_jr_interrupt, IRQF_SHARED,
- "caam-jobr", dev);
+ dev_name(dev), dev);
if (error) {
dev_err(dev, "can't connect JobR %d interrupt (%d)\n",
jrp->ridx, jrp->irq);
return 0;
}
-/*
- * Shutdown JobR independent of platform property code
- */
-int caam_jr_shutdown(struct device *dev)
-{
- struct caam_drv_private_jr *jrp = dev_get_drvdata(dev);
- dma_addr_t inpbusaddr, outbusaddr;
- int ret;
-
- ret = caam_reset_hw_jr(dev);
-
- tasklet_kill(&jrp->irqtask);
-
- /* Release interrupt */
- free_irq(jrp->irq, dev);
-
- /* Free rings */
- inpbusaddr = rd_reg64(&jrp->rregs->inpring_base);
- outbusaddr = rd_reg64(&jrp->rregs->outring_base);
- dma_free_coherent(dev, sizeof(dma_addr_t) * JOBR_DEPTH,
- jrp->inpring, inpbusaddr);
- dma_free_coherent(dev, sizeof(struct jr_outentry) * JOBR_DEPTH,
- jrp->outring, outbusaddr);
- kfree(jrp->entinfo);
- of_device_unregister(jrp->jr_pdev);
-
- return ret;
-}
/*
- * Probe routine for each detected JobR subsystem. It assumes that
- * property detection was picked up externally.
+ * Probe routine for each detected JobR subsystem.
*/
-int caam_jr_probe(struct platform_device *pdev, struct device_node *np,
- int ring)
+static int caam_jr_probe(struct platform_device *pdev)
{
- struct device *ctrldev, *jrdev;
- struct platform_device *jr_pdev;
- struct caam_drv_private *ctrlpriv;
+ struct device *jrdev;
+ struct device_node *nprop;
+ struct caam_job_ring __iomem *ctrl;
struct caam_drv_private_jr *jrpriv;
- u32 *jroffset;
+ static int total_jobrs;
int error;
- ctrldev = &pdev->dev;
- ctrlpriv = dev_get_drvdata(ctrldev);
-
+ jrdev = &pdev->dev;
jrpriv = kmalloc(sizeof(struct caam_drv_private_jr),
GFP_KERNEL);
- if (jrpriv == NULL) {
- dev_err(ctrldev, "can't alloc private mem for job ring %d\n",
- ring);
+ if (!jrpriv)
return -ENOMEM;
- }
- jrpriv->parentdev = ctrldev; /* point back to parent */
- jrpriv->ridx = ring; /* save ring identity relative to detection */
- /*
- * Derive a pointer to the detected JobRs regs
- * Driver has already iomapped the entire space, we just
- * need to add in the offset to this JobR. Don't know if I
- * like this long-term, but it'll run
- */
- jroffset = (u32 *)of_get_property(np, "reg", NULL);
- jrpriv->rregs = (struct caam_job_ring __iomem *)((void *)ctrlpriv->ctrl
- + *jroffset);
+ dev_set_drvdata(jrdev, jrpriv);
- /* Build a local dev for each detected queue */
- jr_pdev = of_platform_device_create(np, NULL, ctrldev);
- if (jr_pdev == NULL) {
- kfree(jrpriv);
- return -EINVAL;
+ /* save ring identity relative to detection */
+ jrpriv->ridx = total_jobrs++;
+
+ nprop = pdev->dev.of_node;
+ /* Get configuration properties from device tree */
+ /* First, get register page */
+ ctrl = of_iomap(nprop, 0);
+ if (!ctrl) {
+ dev_err(jrdev, "of_iomap() failed\n");
+ return -ENOMEM;
}
- jrpriv->jr_pdev = jr_pdev;
- jrdev = &jr_pdev->dev;
- dev_set_drvdata(jrdev, jrpriv);
- ctrlpriv->jrdev[ring] = jrdev;
+ jrpriv->rregs = (struct caam_job_ring __force *)ctrl;
if (sizeof(dma_addr_t) == sizeof(u64))
- if (of_device_is_compatible(np, "fsl,sec-v5.0-job-ring"))
+ if (of_device_is_compatible(nprop, "fsl,sec-v5.0-job-ring"))
dma_set_mask(jrdev, DMA_BIT_MASK(40));
else
dma_set_mask(jrdev, DMA_BIT_MASK(36));
dma_set_mask(jrdev, DMA_BIT_MASK(32));
/* Identify the interrupt */
- jrpriv->irq = irq_of_parse_and_map(np, 0);
+ jrpriv->irq = irq_of_parse_and_map(nprop, 0);
/* Now do the platform independent part */
error = caam_jr_init(jrdev); /* now turn on hardware */
if (error) {
- of_device_unregister(jr_pdev);
kfree(jrpriv);
return error;
}
- return error;
+ jrpriv->dev = jrdev;
+ spin_lock(&driver_data.jr_alloc_lock);
+ list_add_tail(&jrpriv->list_node, &driver_data.jr_list);
+ spin_unlock(&driver_data.jr_alloc_lock);
+
+ atomic_set(&jrpriv->tfm_count, 0);
+
+ return 0;
+}
+
+static struct of_device_id caam_jr_match[] = {
+ {
+ .compatible = "fsl,sec-v4.0-job-ring",
+ },
+ {
+ .compatible = "fsl,sec4.0-job-ring",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, caam_jr_match);
+
+static struct platform_driver caam_jr_driver = {
+ .driver = {
+ .name = "caam_jr",
+ .owner = THIS_MODULE,
+ .of_match_table = caam_jr_match,
+ },
+ .probe = caam_jr_probe,
+ .remove = caam_jr_remove,
+};
+
+static int __init jr_driver_init(void)
+{
+ spin_lock_init(&driver_data.jr_alloc_lock);
+ INIT_LIST_HEAD(&driver_data.jr_list);
+ return platform_driver_register(&caam_jr_driver);
+}
+
+static void __exit jr_driver_exit(void)
+{
+ platform_driver_unregister(&caam_jr_driver);
}
+
+module_init(jr_driver_init);
+module_exit(jr_driver_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FSL CAAM JR request backend");
+MODULE_AUTHOR("Freescale Semiconductor - NMG/STC");
#define JR_H
/* Prototypes for backend-level services exposed to APIs */
+struct device *caam_jr_alloc(void);
+void caam_jr_free(struct device *rdev);
int caam_jr_enqueue(struct device *dev, u32 *desc,
void (*cbk)(struct device *dev, u32 *desc, u32 status,
void *areq),
void *areq);
-extern int caam_jr_probe(struct platform_device *pdev, struct device_node *np,
- int ring);
-extern int caam_jr_shutdown(struct device *dev);
#endif /* JR_H */
/* RNG4 TRNG test registers */
struct rng4tst {
-#define RTMCTL_PRGM 0x00010000 /* 1 -> program mode, 0 -> run mode */
+#define RTMCTL_PRGM 0x00010000 /* 1 -> program mode, 0 -> run mode */
u32 rtmctl; /* misc. control register */
u32 rtscmisc; /* statistical check misc. register */
u32 rtpkrrng; /* poker range register */
};
#define RTSDCTL_ENT_DLY_SHIFT 16
#define RTSDCTL_ENT_DLY_MASK (0xffff << RTSDCTL_ENT_DLY_SHIFT)
+#define RTSDCTL_ENT_DLY_MIN 1200
+#define RTSDCTL_ENT_DLY_MAX 12800
u32 rtsdctl; /* seed control register */
union {
u32 rtsblim; /* PRGM=1: sparse bit limit register */
u32 rtfrqcnt; /* PRGM=0: freq. count register */
};
u32 rsvd1[40];
+#define RDSTA_SKVT 0x80000000
+#define RDSTA_SKVN 0x40000000
#define RDSTA_IF0 0x00000001
+#define RDSTA_IF1 0x00000002
+#define RDSTA_IFMASK (RDSTA_IF1 | RDSTA_IF0)
u32 rdsta;
u32 rsvd2[15];
};
u32 jr_ctl_hi; /* CxJRR - JobR Control Register @800 */
u32 jr_ctl_lo;
u64 jr_descaddr; /* CxDADR - JobR Descriptor Address */
+#define DECO_OP_STATUS_HI_ERR_MASK 0xF00000FF
u32 op_status_hi; /* DxOPSTA - DECO Operation Status */
u32 op_status_lo;
u32 rsvd24[2];
u32 rsvd29[48];
u32 descbuf[64]; /* DxDESB - Descriptor buffer */
u32 rscvd30[193];
+#define DESC_DBG_DECO_STAT_HOST_ERR 0x00D00000
+#define DESC_DBG_DECO_STAT_VALID 0x80000000
+#define DESC_DBG_DECO_STAT_MASK 0x00F00000
u32 desc_dbg; /* DxDDR - DECO Debug Register */
u32 rsvd31[126];
};
-/* DECO DBG Register Valid Bit*/
-#define DECO_DBG_VALID 0x80000000
#define DECO_JQCR_WHL 0x20000000
#define DECO_JQCR_FOUR 0x10000000
return nents;
}
+/* Map SG page in kernel virtual address space and copy */
+static inline void sg_map_copy(u8 *dest, struct scatterlist *sg,
+ int len, int offset)
+{
+ u8 *mapped_addr;
+
+ /*
+ * Page here can be user-space pinned using get_user_pages
+ * Same must be kmapped before use and kunmapped subsequently
+ */
+ mapped_addr = kmap_atomic(sg_page(sg));
+ memcpy(dest, mapped_addr + offset, len);
+ kunmap_atomic(mapped_addr);
+}
+
/* Copy from len bytes of sg to dest, starting from beginning */
static inline void sg_copy(u8 *dest, struct scatterlist *sg, unsigned int len)
{
int cpy_index = 0, next_cpy_index = current_sg->length;
while (next_cpy_index < len) {
- memcpy(dest + cpy_index, (u8 *) sg_virt(current_sg),
- current_sg->length);
+ sg_map_copy(dest + cpy_index, current_sg, current_sg->length,
+ current_sg->offset);
current_sg = scatterwalk_sg_next(current_sg);
cpy_index = next_cpy_index;
next_cpy_index += current_sg->length;
}
if (cpy_index < len)
- memcpy(dest + cpy_index, (u8 *) sg_virt(current_sg),
- len - cpy_index);
+ sg_map_copy(dest + cpy_index, current_sg, len-cpy_index,
+ current_sg->offset);
}
/* Copy sg data, from to_skip to end, to dest */
int to_skip, unsigned int end)
{
struct scatterlist *current_sg = sg;
- int sg_index, cpy_index;
+ int sg_index, cpy_index, offset;
sg_index = current_sg->length;
while (sg_index <= to_skip) {
sg_index += current_sg->length;
}
cpy_index = sg_index - to_skip;
- memcpy(dest, (u8 *) sg_virt(current_sg) +
- current_sg->length - cpy_index, cpy_index);
- current_sg = scatterwalk_sg_next(current_sg);
- if (end - sg_index)
+ offset = current_sg->offset + current_sg->length - cpy_index;
+ sg_map_copy(dest, current_sg, cpy_index, offset);
+ if (end - sg_index) {
+ current_sg = scatterwalk_sg_next(current_sg);
sg_copy(dest + cpy_index, current_sg, end - sg_index);
+ }
}
platform_set_drvdata(pdev, dev);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r) {
- dev_err(&pdev->dev, "failed to get IORESOURCE_MEM\n");
- return -ENXIO;
- }
- dev->dcp_regs_base = devm_ioremap(&pdev->dev, r->start,
- resource_size(r));
+ dev->dcp_regs_base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(dev->dcp_regs_base))
+ return PTR_ERR(dev->dcp_regs_base);
dcp_set(dev, DCP_CTRL_SFRST, DCP_REG_CTRL);
udelay(10);
return -EIO;
}
dev->dcp_vmi_irq = r->start;
- ret = request_irq(dev->dcp_vmi_irq, dcp_vmi_irq, 0, "dcp", dev);
+ ret = devm_request_irq(&pdev->dev, dev->dcp_vmi_irq, dcp_vmi_irq, 0,
+ "dcp", dev);
if (ret != 0) {
dev_err(&pdev->dev, "can't request_irq (0)\n");
return -EIO;
r = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
if (!r) {
dev_err(&pdev->dev, "can't get IRQ resource (1)\n");
- ret = -EIO;
- goto err_free_irq0;
+ return -EIO;
}
dev->dcp_irq = r->start;
- ret = request_irq(dev->dcp_irq, dcp_irq, 0, "dcp", dev);
+ ret = devm_request_irq(&pdev->dev, dev->dcp_irq, dcp_irq, 0, "dcp",
+ dev);
if (ret != 0) {
dev_err(&pdev->dev, "can't request_irq (1)\n");
- ret = -EIO;
- goto err_free_irq0;
+ return -EIO;
}
dev->hw_pkg[0] = dma_alloc_coherent(&pdev->dev,
GFP_KERNEL);
if (!dev->hw_pkg[0]) {
dev_err(&pdev->dev, "Could not allocate hw descriptors\n");
- ret = -ENOMEM;
- goto err_free_irq1;
+ return -ENOMEM;
}
for (i = 1; i < DCP_MAX_PKG; i++) {
for (j = 0; j < i; j++)
crypto_unregister_alg(&algs[j]);
err_free_key_iv:
+ tasklet_kill(&dev->done_task);
+ tasklet_kill(&dev->queue_task);
dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base,
dev->payload_base_dma);
err_free_hw_packet:
dma_free_coherent(&pdev->dev, DCP_MAX_PKG *
sizeof(struct dcp_hw_packet), dev->hw_pkg[0],
dev->hw_phys_pkg);
-err_free_irq1:
- free_irq(dev->dcp_irq, dev);
-err_free_irq0:
- free_irq(dev->dcp_vmi_irq, dev);
return ret;
}
int j;
dev = platform_get_drvdata(pdev);
- dma_free_coherent(&pdev->dev,
- DCP_MAX_PKG * sizeof(struct dcp_hw_packet),
- dev->hw_pkg[0], dev->hw_phys_pkg);
-
- dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base,
- dev->payload_base_dma);
+ misc_deregister(&dev->dcp_bootstream_misc);
- free_irq(dev->dcp_irq, dev);
- free_irq(dev->dcp_vmi_irq, dev);
+ for (j = 0; j < ARRAY_SIZE(algs); j++)
+ crypto_unregister_alg(&algs[j]);
tasklet_kill(&dev->done_task);
tasklet_kill(&dev->queue_task);
- for (j = 0; j < ARRAY_SIZE(algs); j++)
- crypto_unregister_alg(&algs[j]);
+ dma_free_coherent(&pdev->dev, 2 * AES_KEYSIZE_128, dev->payload_base,
+ dev->payload_base_dma);
- misc_deregister(&dev->dcp_bootstream_misc);
+ dma_free_coherent(&pdev->dev,
+ DCP_MAX_PKG * sizeof(struct dcp_hw_packet),
+ dev->hw_pkg[0], dev->hw_phys_pkg);
return 0;
}
unsigned int keylen)
{
struct ixp_ctx *ctx = crypto_aead_ctx(tfm);
- struct rtattr *rta = (struct rtattr *)key;
- struct crypto_authenc_key_param *param;
+ struct crypto_authenc_keys keys;
- if (!RTA_OK(rta, keylen))
- goto badkey;
- if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
- goto badkey;
- if (RTA_PAYLOAD(rta) < sizeof(*param))
+ if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
goto badkey;
- param = RTA_DATA(rta);
- ctx->enckey_len = be32_to_cpu(param->enckeylen);
-
- key += RTA_ALIGN(rta->rta_len);
- keylen -= RTA_ALIGN(rta->rta_len);
+ if (keys.authkeylen > sizeof(ctx->authkey))
+ goto badkey;
- if (keylen < ctx->enckey_len)
+ if (keys.enckeylen > sizeof(ctx->enckey))
goto badkey;
- ctx->authkey_len = keylen - ctx->enckey_len;
- memcpy(ctx->enckey, key + ctx->authkey_len, ctx->enckey_len);
- memcpy(ctx->authkey, key, ctx->authkey_len);
+ memcpy(ctx->authkey, keys.authkey, keys.authkeylen);
+ memcpy(ctx->enckey, keys.enckey, keys.enckeylen);
+ ctx->authkey_len = keys.authkeylen;
+ ctx->enckey_len = keys.enckeylen;
return aead_setup(tfm, crypto_aead_authsize(tfm));
badkey:
- ctx->enckey_len = 0;
crypto_aead_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
return -EINVAL;
}
return mv_cra_hash_init(tfm, "sha1", COP_HMAC_SHA1, SHA1_BLOCK_SIZE);
}
-irqreturn_t crypto_int(int irq, void *priv)
+static irqreturn_t crypto_int(int irq, void *priv)
{
u32 val;
return IRQ_HANDLED;
}
-struct crypto_alg mv_aes_alg_ecb = {
+static struct crypto_alg mv_aes_alg_ecb = {
.cra_name = "ecb(aes)",
.cra_driver_name = "mv-ecb-aes",
.cra_priority = 300,
},
};
-struct crypto_alg mv_aes_alg_cbc = {
+static struct crypto_alg mv_aes_alg_cbc = {
.cra_name = "cbc(aes)",
.cra_driver_name = "mv-cbc-aes",
.cra_priority = 300,
},
};
-struct ahash_alg mv_sha1_alg = {
+static struct ahash_alg mv_sha1_alg = {
.init = mv_hash_init,
.update = mv_hash_update,
.final = mv_hash_final,
}
};
-struct ahash_alg mv_hmac_sha1_alg = {
+static struct ahash_alg mv_hmac_sha1_alg = {
.init = mv_hash_init,
.update = mv_hash_update,
.final = mv_hash_final,
goto err_unmap_sram;
}
- ret = request_irq(irq, crypto_int, IRQF_DISABLED, dev_name(&pdev->dev),
+ ret = request_irq(irq, crypto_int, 0, dev_name(&pdev->dev),
cp);
if (ret)
goto err_thread;
.driver = {
.owner = THIS_MODULE,
.name = "mv_crypto",
- .of_match_table = of_match_ptr(mv_cesa_of_match_table),
+ .of_match_table = mv_cesa_of_match_table,
},
};
MODULE_ALIAS("platform:mv_crypto");
if (dd->flags & FLAGS_CBC)
val |= AES_REG_CTRL_CBC;
if (dd->flags & FLAGS_CTR) {
- val |= AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_32;
+ val |= AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_128;
mask = AES_REG_CTRL_CTR | AES_REG_CTRL_CTR_WIDTH_MASK;
}
if (dd->flags & FLAGS_ENCRYPT)
return err;
}
-int omap_aes_check_aligned(struct scatterlist *sg)
+static int omap_aes_check_aligned(struct scatterlist *sg)
{
while (sg) {
if (!IS_ALIGNED(sg->offset, 4))
return 0;
}
-int omap_aes_copy_sgs(struct omap_aes_dev *dd)
+static int omap_aes_copy_sgs(struct omap_aes_dev *dd)
{
void *buf_in, *buf_out;
int pages;
MODULE_DESCRIPTION("OMAP SHA1/MD5 hw acceleration support.");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Dmitry Kasatkin");
+MODULE_ALIAS("platform:omap-sham");
{
struct spacc_aead_ctx *ctx = crypto_aead_ctx(tfm);
struct spacc_alg *alg = to_spacc_alg(tfm->base.__crt_alg);
- struct rtattr *rta = (void *)key;
- struct crypto_authenc_key_param *param;
- unsigned int authkeylen, enckeylen;
+ struct crypto_authenc_keys keys;
int err = -EINVAL;
- if (!RTA_OK(rta, keylen))
+ if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
goto badkey;
- if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
+ if (keys.enckeylen > AES_MAX_KEY_SIZE)
goto badkey;
- if (RTA_PAYLOAD(rta) < sizeof(*param))
- goto badkey;
-
- param = RTA_DATA(rta);
- enckeylen = be32_to_cpu(param->enckeylen);
-
- key += RTA_ALIGN(rta->rta_len);
- keylen -= RTA_ALIGN(rta->rta_len);
-
- if (keylen < enckeylen)
- goto badkey;
-
- authkeylen = keylen - enckeylen;
-
- if (enckeylen > AES_MAX_KEY_SIZE)
+ if (keys.authkeylen > sizeof(ctx->hash_ctx))
goto badkey;
if ((alg->ctrl_default & SPACC_CRYPTO_ALG_MASK) ==
SPA_CTRL_CIPH_ALG_AES)
- err = spacc_aead_aes_setkey(tfm, key + authkeylen, enckeylen);
+ err = spacc_aead_aes_setkey(tfm, keys.enckey, keys.enckeylen);
else
- err = spacc_aead_des_setkey(tfm, key + authkeylen, enckeylen);
+ err = spacc_aead_des_setkey(tfm, keys.enckey, keys.enckeylen);
if (err)
goto badkey;
- memcpy(ctx->hash_ctx, key, authkeylen);
- ctx->hash_key_len = authkeylen;
+ memcpy(ctx->hash_ctx, keys.authkey, keys.authkeylen);
+ ctx->hash_key_len = keys.authkeylen;
return 0;
.driver = {
.name = SAHARA_NAME,
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(sahara_dt_ids),
+ .of_match_table = sahara_dt_ids,
},
.id_table = sahara_platform_ids,
};
const u8 *key, unsigned int keylen)
{
struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
- struct rtattr *rta = (void *)key;
- struct crypto_authenc_key_param *param;
- unsigned int authkeylen;
- unsigned int enckeylen;
-
- if (!RTA_OK(rta, keylen))
- goto badkey;
+ struct crypto_authenc_keys keys;
- if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
+ if (crypto_authenc_extractkeys(&keys, key, keylen) != 0)
goto badkey;
- if (RTA_PAYLOAD(rta) < sizeof(*param))
+ if (keys.authkeylen + keys.enckeylen > TALITOS_MAX_KEY_SIZE)
goto badkey;
- param = RTA_DATA(rta);
- enckeylen = be32_to_cpu(param->enckeylen);
-
- key += RTA_ALIGN(rta->rta_len);
- keylen -= RTA_ALIGN(rta->rta_len);
+ memcpy(ctx->key, keys.authkey, keys.authkeylen);
+ memcpy(&ctx->key[keys.authkeylen], keys.enckey, keys.enckeylen);
- if (keylen < enckeylen)
- goto badkey;
-
- authkeylen = keylen - enckeylen;
-
- if (keylen > TALITOS_MAX_KEY_SIZE)
- goto badkey;
-
- memcpy(&ctx->key, key, keylen);
-
- ctx->keylen = keylen;
- ctx->enckeylen = enckeylen;
- ctx->authkeylen = authkeylen;
+ ctx->keylen = keys.authkeylen + keys.enckeylen;
+ ctx->enckeylen = keys.enckeylen;
+ ctx->authkeylen = keys.authkeylen;
return 0;
if (edesc->assoc_chained)
talitos_unmap_sg_chain(dev, areq->assoc, DMA_TO_DEVICE);
- else
+ else if (areq->assoclen)
/* assoc_nents counts also for IV in non-contiguous cases */
dma_unmap_sg(dev, areq->assoc,
edesc->assoc_nents ? edesc->assoc_nents - 1 : 1,
dma_sync_single_for_device(dev, edesc->dma_link_tbl,
edesc->dma_len, DMA_BIDIRECTIONAL);
} else {
- to_talitos_ptr(&desc->ptr[1], sg_dma_address(areq->assoc));
+ if (areq->assoclen)
+ to_talitos_ptr(&desc->ptr[1],
+ sg_dma_address(areq->assoc));
+ else
+ to_talitos_ptr(&desc->ptr[1], edesc->iv_dma);
desc->ptr[1].j_extent = 0;
}
unsigned int authsize,
unsigned int ivsize,
int icv_stashing,
- u32 cryptoflags)
+ u32 cryptoflags,
+ bool encrypt)
{
struct talitos_edesc *edesc;
int assoc_nents = 0, src_nents, dst_nents, alloc_len, dma_len;
return ERR_PTR(-EINVAL);
}
- if (iv)
+ if (ivsize)
iv_dma = dma_map_single(dev, iv, ivsize, DMA_TO_DEVICE);
- if (assoc) {
+ if (assoclen) {
/*
* Currently it is assumed that iv is provided whenever assoc
* is.
assoc_nents = assoc_nents ? assoc_nents + 1 : 2;
}
- src_nents = sg_count(src, cryptlen + authsize, &src_chained);
- src_nents = (src_nents == 1) ? 0 : src_nents;
-
- if (!dst) {
- dst_nents = 0;
- } else {
- if (dst == src) {
- dst_nents = src_nents;
- } else {
- dst_nents = sg_count(dst, cryptlen + authsize,
- &dst_chained);
- dst_nents = (dst_nents == 1) ? 0 : dst_nents;
- }
+ if (!dst || dst == src) {
+ src_nents = sg_count(src, cryptlen + authsize, &src_chained);
+ src_nents = (src_nents == 1) ? 0 : src_nents;
+ dst_nents = dst ? src_nents : 0;
+ } else { /* dst && dst != src*/
+ src_nents = sg_count(src, cryptlen + (encrypt ? 0 : authsize),
+ &src_chained);
+ src_nents = (src_nents == 1) ? 0 : src_nents;
+ dst_nents = sg_count(dst, cryptlen + (encrypt ? authsize : 0),
+ &dst_chained);
+ dst_nents = (dst_nents == 1) ? 0 : dst_nents;
}
/*
edesc = kmalloc(alloc_len, GFP_DMA | flags);
if (!edesc) {
- talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE);
+ if (assoc_chained)
+ talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE);
+ else if (assoclen)
+ dma_unmap_sg(dev, assoc,
+ assoc_nents ? assoc_nents - 1 : 1,
+ DMA_TO_DEVICE);
+
if (iv_dma)
dma_unmap_single(dev, iv_dma, ivsize, DMA_TO_DEVICE);
+
dev_err(dev, "could not allocate edescriptor\n");
return ERR_PTR(-ENOMEM);
}
}
static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv,
- int icv_stashing)
+ int icv_stashing, bool encrypt)
{
struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
return talitos_edesc_alloc(ctx->dev, areq->assoc, areq->src, areq->dst,
iv, areq->assoclen, areq->cryptlen,
ctx->authsize, ivsize, icv_stashing,
- areq->base.flags);
+ areq->base.flags, encrypt);
}
static int aead_encrypt(struct aead_request *req)
struct talitos_edesc *edesc;
/* allocate extended descriptor */
- edesc = aead_edesc_alloc(req, req->iv, 0);
+ edesc = aead_edesc_alloc(req, req->iv, 0, true);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
req->cryptlen -= authsize;
/* allocate extended descriptor */
- edesc = aead_edesc_alloc(req, req->iv, 1);
+ edesc = aead_edesc_alloc(req, req->iv, 1, false);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
struct talitos_edesc *edesc;
/* allocate extended descriptor */
- edesc = aead_edesc_alloc(areq, req->giv, 0);
+ edesc = aead_edesc_alloc(areq, req->giv, 0, true);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
}
static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request *
- areq)
+ areq, bool encrypt)
{
struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
return talitos_edesc_alloc(ctx->dev, NULL, areq->src, areq->dst,
areq->info, 0, areq->nbytes, 0, ivsize, 0,
- areq->base.flags);
+ areq->base.flags, encrypt);
}
static int ablkcipher_encrypt(struct ablkcipher_request *areq)
struct talitos_edesc *edesc;
/* allocate extended descriptor */
- edesc = ablkcipher_edesc_alloc(areq);
+ edesc = ablkcipher_edesc_alloc(areq, true);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
struct talitos_edesc *edesc;
/* allocate extended descriptor */
- edesc = ablkcipher_edesc_alloc(areq);
+ edesc = ablkcipher_edesc_alloc(areq, false);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
return talitos_edesc_alloc(ctx->dev, NULL, req_ctx->psrc, NULL, NULL, 0,
- nbytes, 0, 0, 0, areq->base.flags);
+ nbytes, 0, 0, 0, areq->base.flags, false);
}
static int ahash_init(struct ahash_request *areq)
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
static DECLARE_WORK(aes_work, aes_workqueue_handler);
static struct workqueue_struct *aes_wq;
-extern unsigned long long tegra_chip_uid(void);
-
static inline u32 aes_readl(struct tegra_aes_dev *dd, u32 offset)
{
return readl(dd->io_base + offset);
struct tegra_aes_dev *dd = aes_dev;
struct tegra_aes_ctx *ctx = &rng_ctx;
struct tegra_aes_slot *key_slot;
- struct timespec ts;
int ret = 0;
- u64 nsec, tmp[2];
+ u8 tmp[16]; /* 16 bytes = 128 bits of entropy */
u8 *dt;
if (!ctx || !dd) {
- dev_err(dd->dev, "ctx=0x%x, dd=0x%x\n",
+ pr_err("ctx=0x%x, dd=0x%x\n",
(unsigned int)ctx, (unsigned int)dd);
return -EINVAL;
}
if (dd->ivlen >= (2 * DEFAULT_RNG_BLK_SZ + AES_KEYSIZE_128)) {
dt = dd->iv + DEFAULT_RNG_BLK_SZ + AES_KEYSIZE_128;
} else {
- getnstimeofday(&ts);
- nsec = timespec_to_ns(&ts);
- do_div(nsec, 1000);
- nsec ^= dd->ctr << 56;
- dd->ctr++;
- tmp[0] = nsec;
- tmp[1] = tegra_chip_uid();
- dt = (u8 *)tmp;
+ get_random_bytes(tmp, sizeof(tmp));
+ dt = tmp;
}
memcpy(dd->dt, dt, DEFAULT_RNG_BLK_SZ);
return 0;
}
-void tegra_aes_cra_exit(struct crypto_tfm *tfm)
+static void tegra_aes_cra_exit(struct crypto_tfm *tfm)
{
struct tegra_aes_ctx *ctx =
crypto_ablkcipher_ctx((struct crypto_ablkcipher *)tfm);
}
/* Initialize the vde clock */
- dd->aes_clk = clk_get(dev, "vde");
+ dd->aes_clk = devm_clk_get(dev, "vde");
if (IS_ERR(dd->aes_clk)) {
dev_err(dev, "iclock intialization failed.\n");
err = -ENODEV;
if (dd->buf_out)
dma_free_coherent(dev, AES_HW_DMA_BUFFER_SIZE_BYTES,
dd->buf_out, dd->dma_buf_out);
- if (!IS_ERR(dd->aes_clk))
- clk_put(dd->aes_clk);
if (aes_wq)
destroy_workqueue(aes_wq);
spin_lock(&list_lock);
dd->buf_in, dd->dma_buf_in);
dma_free_coherent(dev, AES_HW_DMA_BUFFER_SIZE_BYTES,
dd->buf_out, dd->dma_buf_out);
- clk_put(dd->aes_clk);
aes_dev = NULL;
return 0;
.cmd_per_lun = 1,
.can_queue = 1,
.sdev_attrs = sbp2_scsi_sysfs_attrs,
+ .no_write_same = 1,
};
MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");
static int efi_pstore_open(struct pstore_info *psi)
{
- efivar_entry_iter_begin();
psi->data = NULL;
return 0;
}
static int efi_pstore_close(struct pstore_info *psi)
{
- efivar_entry_iter_end();
psi->data = NULL;
return 0;
}
char **buf;
};
+static inline u64 generic_id(unsigned long timestamp,
+ unsigned int part, int count)
+{
+ return (timestamp * 100 + part) * 1000 + count;
+}
+
static int efi_pstore_read_func(struct efivar_entry *entry, void *data)
{
efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
if (sscanf(name, "dump-type%u-%u-%d-%lu-%c",
cb_data->type, &part, &cnt, &time, &data_type) == 5) {
- *cb_data->id = part;
+ *cb_data->id = generic_id(time, part, cnt);
*cb_data->count = cnt;
cb_data->timespec->tv_sec = time;
cb_data->timespec->tv_nsec = 0;
*cb_data->compressed = false;
} else if (sscanf(name, "dump-type%u-%u-%d-%lu",
cb_data->type, &part, &cnt, &time) == 4) {
- *cb_data->id = part;
+ *cb_data->id = generic_id(time, part, cnt);
*cb_data->count = cnt;
cb_data->timespec->tv_sec = time;
cb_data->timespec->tv_nsec = 0;
* which doesn't support holding
* multiple logs, remains.
*/
- *cb_data->id = part;
+ *cb_data->id = generic_id(time, part, 0);
*cb_data->count = 0;
cb_data->timespec->tv_sec = time;
cb_data->timespec->tv_nsec = 0;
__efivar_entry_get(entry, &entry->var.Attributes,
&entry->var.DataSize, entry->var.Data);
size = entry->var.DataSize;
+ memcpy(*cb_data->buf, entry->var.Data,
+ (size_t)min_t(unsigned long, EFIVARS_DATA_SIZE_MAX, size));
- *cb_data->buf = kmemdup(entry->var.Data, size, GFP_KERNEL);
- if (*cb_data->buf == NULL)
- return -ENOMEM;
return size;
}
+/**
+ * efi_pstore_scan_sysfs_enter
+ * @entry: scanning entry
+ * @next: next entry
+ * @head: list head
+ */
+static void efi_pstore_scan_sysfs_enter(struct efivar_entry *pos,
+ struct efivar_entry *next,
+ struct list_head *head)
+{
+ pos->scanning = true;
+ if (&next->list != head)
+ next->scanning = true;
+}
+
+/**
+ * __efi_pstore_scan_sysfs_exit
+ * @entry: deleting entry
+ * @turn_off_scanning: Check if a scanning flag should be turned off
+ */
+static inline void __efi_pstore_scan_sysfs_exit(struct efivar_entry *entry,
+ bool turn_off_scanning)
+{
+ if (entry->deleting) {
+ list_del(&entry->list);
+ efivar_entry_iter_end();
+ efivar_unregister(entry);
+ efivar_entry_iter_begin();
+ } else if (turn_off_scanning)
+ entry->scanning = false;
+}
+
+/**
+ * efi_pstore_scan_sysfs_exit
+ * @pos: scanning entry
+ * @next: next entry
+ * @head: list head
+ * @stop: a flag checking if scanning will stop
+ */
+static void efi_pstore_scan_sysfs_exit(struct efivar_entry *pos,
+ struct efivar_entry *next,
+ struct list_head *head, bool stop)
+{
+ __efi_pstore_scan_sysfs_exit(pos, true);
+ if (stop)
+ __efi_pstore_scan_sysfs_exit(next, &next->list != head);
+}
+
+/**
+ * efi_pstore_sysfs_entry_iter
+ *
+ * @data: function-specific data to pass to callback
+ * @pos: entry to begin iterating from
+ *
+ * You MUST call efivar_enter_iter_begin() before this function, and
+ * efivar_entry_iter_end() afterwards.
+ *
+ * It is possible to begin iteration from an arbitrary entry within
+ * the list by passing @pos. @pos is updated on return to point to
+ * the next entry of the last one passed to efi_pstore_read_func().
+ * To begin iterating from the beginning of the list @pos must be %NULL.
+ */
+static int efi_pstore_sysfs_entry_iter(void *data, struct efivar_entry **pos)
+{
+ struct efivar_entry *entry, *n;
+ struct list_head *head = &efivar_sysfs_list;
+ int size = 0;
+
+ if (!*pos) {
+ list_for_each_entry_safe(entry, n, head, list) {
+ efi_pstore_scan_sysfs_enter(entry, n, head);
+
+ size = efi_pstore_read_func(entry, data);
+ efi_pstore_scan_sysfs_exit(entry, n, head, size < 0);
+ if (size)
+ break;
+ }
+ *pos = n;
+ return size;
+ }
+
+ list_for_each_entry_safe_from((*pos), n, head, list) {
+ efi_pstore_scan_sysfs_enter((*pos), n, head);
+
+ size = efi_pstore_read_func((*pos), data);
+ efi_pstore_scan_sysfs_exit((*pos), n, head, size < 0);
+ if (size)
+ break;
+ }
+ *pos = n;
+ return size;
+}
+
+/**
+ * efi_pstore_read
+ *
+ * This function returns a size of NVRAM entry logged via efi_pstore_write().
+ * The meaning and behavior of efi_pstore/pstore are as below.
+ *
+ * size > 0: Got data of an entry logged via efi_pstore_write() successfully,
+ * and pstore filesystem will continue reading subsequent entries.
+ * size == 0: Entry was not logged via efi_pstore_write(),
+ * and efi_pstore driver will continue reading subsequent entries.
+ * size < 0: Failed to get data of entry logging via efi_pstore_write(),
+ * and pstore will stop reading entry.
+ */
static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type,
int *count, struct timespec *timespec,
char **buf, bool *compressed,
struct pstore_info *psi)
{
struct pstore_read_data data;
+ ssize_t size;
data.id = id;
data.type = type;
data.compressed = compressed;
data.buf = buf;
- return __efivar_entry_iter(efi_pstore_read_func, &efivar_sysfs_list, &data,
- (struct efivar_entry **)&psi->data);
+ *data.buf = kzalloc(EFIVARS_DATA_SIZE_MAX, GFP_KERNEL);
+ if (!*data.buf)
+ return -ENOMEM;
+
+ efivar_entry_iter_begin();
+ size = efi_pstore_sysfs_entry_iter(&data,
+ (struct efivar_entry **)&psi->data);
+ efivar_entry_iter_end();
+ if (size <= 0)
+ kfree(*data.buf);
+ return size;
}
static int efi_pstore_write(enum pstore_type_id type,
return 0;
}
+ if (entry->scanning) {
+ /*
+ * Skip deletion because this entry will be deleted
+ * after scanning is completed.
+ */
+ entry->deleting = true;
+ } else
+ list_del(&entry->list);
+
/* found */
__efivar_entry_delete(entry);
- list_del(&entry->list);
return 1;
}
char name[DUMP_NAME_LEN];
efi_char16_t efi_name[DUMP_NAME_LEN];
int found, i;
+ unsigned int part;
- sprintf(name, "dump-type%u-%u-%d-%lu", type, (unsigned int)id, count,
- time.tv_sec);
+ do_div(id, 1000);
+ part = do_div(id, 100);
+ sprintf(name, "dump-type%u-%u-%d-%lu", type, part, count, time.tv_sec);
for (i = 0; i < DUMP_NAME_LEN; i++)
efi_name[i] = name[i];
- edata.id = id;
+ edata.id = part;
edata.type = type;
edata.count = count;
edata.time = time;
efivar_entry_iter_begin();
found = __efivar_entry_iter(efi_pstore_erase_func, &efivar_sysfs_list, &edata, &entry);
- efivar_entry_iter_end();
- if (found)
+ if (found && !entry->scanning) {
+ efivar_entry_iter_end();
efivar_unregister(entry);
+ } else
+ efivar_entry_iter_end();
return 0;
}
else if (__efivar_entry_delete(entry))
err = -EIO;
- efivar_entry_iter_end();
-
- if (err)
+ if (err) {
+ efivar_entry_iter_end();
return err;
+ }
- efivar_unregister(entry);
+ if (!entry->scanning) {
+ efivar_entry_iter_end();
+ efivar_unregister(entry);
+ } else
+ efivar_entry_iter_end();
/* It's dead Jim.... */
return count;
if (!found)
return NULL;
- if (remove)
- list_del(&entry->list);
+ if (remove) {
+ if (entry->scanning) {
+ /*
+ * The entry will be deleted
+ * after scanning is completed.
+ */
+ entry->deleting = true;
+ } else
+ list_del(&entry->list);
+ }
return entry;
}
spin_unlock_irqrestore(&kona_gpio->lock, flags);
/* return the specified bit status */
- return !!(val & bit);
+ return !!(val & BIT(bit));
}
static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
u32 val;
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+ u32 out_mask, out_shadow;
- val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR);
+ out_mask = in_be32(mm->regs + GPIO_DIR);
- return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio);
+ val = in_be32(mm->regs + GPIO_DAT) & ~out_mask;
+ out_shadow = mpc8xxx_gc->data & out_mask;
+
+ return (val | out_shadow) & mpc8xxx_gpio2mask(gpio);
}
static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
DECLARE_BITMAP(wake_irqs, MAX_NR_GPIO);
DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
struct irq_domain *domain;
- unsigned int summary_irq;
+ int summary_irq;
void __iomem *msm_tlmm_base;
};
spinlock_t lock;
void __iomem *membase;
void __iomem *percpu_membase;
- unsigned int irqbase;
+ int irqbase;
struct irq_domain *domain;
int soc_variant;
};
if (!chip->base)
return -ENOMEM;
- chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR,
- irq_base, &pl061_domain_ops, chip);
- if (!chip->domain)
- return -ENODEV;
-
spin_lock_init(&chip->lock);
chip->gc.request = pl061_gpio_request;
irq_set_chained_handler(irq, pl061_irq_handler);
irq_set_handler_data(irq, chip);
+ chip->domain = irq_domain_add_simple(adev->dev.of_node, PL061_GPIO_NR,
+ irq_base, &pl061_domain_ops, chip);
+ if (!chip->domain)
+ return -ENODEV;
+
for (i = 0; i < PL061_GPIO_NR; i++) {
if (pdata) {
if (pdata->directions & (1 << i))
if (!p->irq_domain) {
ret = -ENXIO;
dev_err(&pdev->dev, "cannot initialize irq domain\n");
- goto err1;
+ goto err0;
}
if (devm_request_irq(&pdev->dev, irq->start,
int mask = BIT(offset);
int val = TB10X_GPIO_DIR_OUT << offset;
+ tb10x_gpio_set(chip, offset, value);
tb10x_set_bits(tb10x_gpio, OFFSET_TO_REG_DDR, mask, val);
return 0;
static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value)
{
struct gpio_twl4030_priv *priv = to_gpio_twl4030(chip);
+ int ret = -EINVAL;
mutex_lock(&priv->mutex);
if (offset < TWL4030_GPIO_MAX)
- twl4030_set_gpio_dataout(offset, value);
+ ret = twl4030_set_gpio_direction(offset, 0);
priv->direction |= BIT(offset);
mutex_unlock(&priv->mutex);
twl_set(chip, offset, value);
- return 0;
+ return ret;
}
static int twl_to_irq(struct gpio_chip *chip, unsigned offset)
static int gpio_twl4030_remove(struct platform_device *pdev);
-static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev,
+ struct twl4030_gpio_platform_data *pdata)
{
struct twl4030_gpio_platform_data *omap_twl_info;
if (!omap_twl_info)
return NULL;
+ if (pdata)
+ *omap_twl_info = *pdata;
+
omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
"ti,use-leds");
mutex_init(&priv->mutex);
if (node)
- pdata = of_gpio_twl4030(&pdev->dev);
+ pdata = of_gpio_twl4030(&pdev->dev, pdata);
if (pdata == NULL) {
dev_err(&pdev->dev, "Platform data is missing\n");
MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ucb1400_gpio");
#include <linux/idr.h>
#include <linux/slab.h>
#include <linux/acpi.h>
+#include <linux/gpio/driver.h>
#define CREATE_TRACE_POINTS
#include <trace/events/gpio.h>
}
EXPORT_SYMBOL_GPL(gpiochip_find);
+static int gpiochip_match_name(struct gpio_chip *chip, void *data)
+{
+ const char *name = data;
+
+ return !strcmp(chip->label, name);
+}
+
+static struct gpio_chip *find_chip_by_name(const char *name)
+{
+ return gpiochip_find((void *)name, gpiochip_match_name);
+}
+
#ifdef CONFIG_PINCTRL
/**
ret = pinctrl_get_group_pins(pctldev, pin_group,
&pin_range->range.pins,
&pin_range->range.npins);
- if (ret < 0)
+ if (ret < 0) {
+ kfree(pin_range);
return ret;
+ }
pinctrl_add_gpio_range(pctldev, &pin_range->range);
mutex_unlock(&gpio_lookup_lock);
}
-/*
- * Caller must have a acquired gpio_lookup_lock
- */
-static struct gpio_chip *find_chip_by_name(const char *name)
-{
- struct gpio_chip *chip = NULL;
-
- list_for_each_entry(chip, &gpio_lookup_list, list) {
- if (chip->label == NULL)
- continue;
- if (!strcmp(chip->label, name))
- break;
- }
-
- return chip;
-}
-
#ifdef CONFIG_OF
static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
- unsigned int idx, unsigned long *flags)
+ unsigned int idx,
+ enum gpio_lookup_flags *flags)
{
char prop_name[32]; /* 32 is max size of property name */
enum of_gpio_flags of_flags;
return desc;
if (of_flags & OF_GPIO_ACTIVE_LOW)
- *flags |= GPIOF_ACTIVE_LOW;
+ *flags |= GPIO_ACTIVE_LOW;
return desc;
}
#else
static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
- unsigned int idx, unsigned long *flags)
+ unsigned int idx,
+ enum gpio_lookup_flags *flags)
{
return ERR_PTR(-ENODEV);
}
#endif
static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id,
- unsigned int idx, unsigned long *flags)
+ unsigned int idx,
+ enum gpio_lookup_flags *flags)
{
struct acpi_gpio_info info;
struct gpio_desc *desc;
return desc;
if (info.gpioint && info.active_low)
- *flags |= GPIOF_ACTIVE_LOW;
+ *flags |= GPIO_ACTIVE_LOW;
return desc;
}
static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
- unsigned int idx, unsigned long *flags)
+ unsigned int idx,
+ enum gpio_lookup_flags *flags)
{
const char *dev_id = dev ? dev_name(dev) : NULL;
struct gpio_desc *desc = ERR_PTR(-ENODEV);
continue;
}
- if (chip->ngpio >= p->chip_hwnum) {
+ if (chip->ngpio <= p->chip_hwnum) {
dev_warn(dev, "GPIO chip %s has %d GPIOs\n",
chip->label, chip->ngpio);
continue;
const char *con_id,
unsigned int idx)
{
- struct gpio_desc *desc;
+ struct gpio_desc *desc = NULL;
int status;
- unsigned long flags = 0;
+ enum gpio_lookup_flags flags = 0;
dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id);
} else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev)) {
dev_dbg(dev, "using ACPI for GPIO lookup\n");
desc = acpi_find_gpio(dev, con_id, idx, &flags);
- } else {
+ }
+
+ /*
+ * Either we are not using DT or ACPI, or their lookup did not return
+ * a result. In that case, use platform lookup as a fallback.
+ */
+ if (!desc || IS_ERR(desc)) {
+ struct gpio_desc *pdesc;
dev_dbg(dev, "using lookup tables for GPIO lookup");
- desc = gpiod_find(dev, con_id, idx, &flags);
+ pdesc = gpiod_find(dev, con_id, idx, &flags);
+ /* If used as fallback, do not replace the previous error */
+ if (!IS_ERR(pdesc) || !desc)
+ desc = pdesc;
}
if (IS_ERR(desc)) {
- dev_warn(dev, "lookup for GPIO %s failed\n", con_id);
+ dev_dbg(dev, "lookup for GPIO %s failed\n", con_id);
return desc;
}
if (status < 0)
return ERR_PTR(status);
- if (flags & GPIOF_ACTIVE_LOW)
+ if (flags & GPIO_ACTIVE_LOW)
set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+ if (flags & GPIO_OPEN_DRAIN)
+ set_bit(FLAG_OPEN_DRAIN, &desc->flags);
+ if (flags & GPIO_OPEN_SOURCE)
+ set_bit(FLAG_OPEN_SOURCE, &desc->flags);
return desc;
}
minor_str = "card%d";
minor->kdev = kzalloc(sizeof(*minor->kdev), GFP_KERNEL);
- if (!minor->dev) {
+ if (!minor->kdev) {
r = -ENOMEM;
goto error;
}
hwmon->hwmon = NULL;
return ret;
#else
- hwmon->hwmon = NULL;
return 0;
#endif
}
- DRM_FILE_OFFSET);
qxl_fence_remove_release(&bo->fence, release->id);
qxl_bo_unref(&bo);
+ kfree(entry);
}
spin_lock(&qdev->release_idr_lock);
idr_remove(&qdev->release_idr, release->id);
- Stantum multitouch panels
- Touch International Panels
- Unitec Panels
+ - Wistron optical touch panels
- XAT optical touch panels
- Xiroku optical touch panels
- Zytronic touch panels
appleir->hid = hid;
+ /* force input as some remotes bypass the input registration */
+ hid->quirks |= HID_QUIRK_HIDINPUT_FORCE;
+
spin_lock_init(&appleir->lock);
setup_timer(&appleir->key_up_timer,
key_up_tick, (unsigned long) appleir);
{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_MANTICORE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GX_IMPERATOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE) },
- { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO2, USB_DEVICE_ID_NINTENDO_WIIMOTE) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) },
{ }
};
#define USB_VENDOR_ID_KYE 0x0458
#define USB_DEVICE_ID_KYE_ERGO_525V 0x0087
#define USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE 0x0138
+#define USB_DEVICE_ID_GENIUS_MANTICORE 0x0153
#define USB_DEVICE_ID_GENIUS_GX_IMPERATOR 0x4018
#define USB_DEVICE_ID_KYE_GPEN_560 0x5003
#define USB_DEVICE_ID_KYE_EASYPEN_I405X 0x5010
#define USB_DEVICE_ID_NEXTWINDOW_TOUCHSCREEN 0x0003
#define USB_VENDOR_ID_NINTENDO 0x057e
-#define USB_VENDOR_ID_NINTENDO2 0x054c
#define USB_DEVICE_ID_NINTENDO_WIIMOTE 0x0306
#define USB_DEVICE_ID_NINTENDO_WIIMOTE2 0x0330
#define USB_DEVICE_ID_SUPER_DUAL_BOX_PRO 0x8802
#define USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO 0x8804
+#define USB_VENDOR_ID_WISTRON 0x0fb8
+#define USB_DEVICE_ID_WISTRON_OPTICAL_TOUCH 0x1109
+
#define USB_VENDOR_ID_X_TENSIONS 0x1ae7
#define USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE 0x9001
case USB_DEVICE_ID_GENIUS_GX_IMPERATOR:
rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 83,
"Genius Gx Imperator Keyboard");
+ case USB_DEVICE_ID_GENIUS_MANTICORE:
+ rdesc = kye_consumer_control_fixup(hdev, rdesc, rsize, 104,
+ "Genius Manticore Keyboard");
break;
}
return rdesc;
goto enabling_err;
}
break;
+ case USB_DEVICE_ID_GENIUS_MANTICORE:
+ /*
+ * The manticore keyboard needs to have all the interfaces
+ * opened at least once to be fully functional.
+ */
+ if (hid_hw_open(hdev))
+ hid_hw_close(hdev);
+ break;
}
return 0;
USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_GENIUS_GX_IMPERATOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+ USB_DEVICE_ID_GENIUS_MANTICORE) },
{ }
};
MODULE_DEVICE_TABLE(hid, kye_devices);
{ .driver_data = MT_CLS_NSMU,
MT_USB_DEVICE(USB_VENDOR_ID_UNITEC,
USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) },
+
+ /* Wistron panels */
+ { .driver_data = MT_CLS_NSMU,
+ MT_USB_DEVICE(USB_VENDOR_ID_WISTRON,
+ USB_DEVICE_ID_WISTRON_OPTICAL_TOUCH) },
+
/* XAT */
{ .driver_data = MT_CLS_NSMU,
MT_USB_DEVICE(USB_VENDOR_ID_XAT,
struct sony_sc {
unsigned long quirks;
+#ifdef CONFIG_SONY_FF
+ struct work_struct rumble_worker;
+ struct hid_device *hdev;
+ __u8 left;
+ __u8 right;
+#endif
+
void *extra;
};
}
#ifdef CONFIG_SONY_FF
-static int sony_play_effect(struct input_dev *dev, void *data,
- struct ff_effect *effect)
+static void sony_rumble_worker(struct work_struct *work)
{
+ struct sony_sc *sc = container_of(work, struct sony_sc, rumble_worker);
unsigned char buf[] = {
0x01,
0x00, 0xff, 0x00, 0xff, 0x00,
0xff, 0x27, 0x10, 0x00, 0x32,
0x00, 0x00, 0x00, 0x00, 0x00
};
- __u8 left;
- __u8 right;
+
+ buf[3] = sc->right;
+ buf[5] = sc->left;
+
+ sc->hdev->hid_output_raw_report(sc->hdev, buf, sizeof(buf),
+ HID_OUTPUT_REPORT);
+}
+
+static int sony_play_effect(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
struct hid_device *hid = input_get_drvdata(dev);
+ struct sony_sc *sc = hid_get_drvdata(hid);
if (effect->type != FF_RUMBLE)
return 0;
- left = effect->u.rumble.strong_magnitude / 256;
- right = effect->u.rumble.weak_magnitude ? 1 : 0;
-
- buf[3] = right;
- buf[5] = left;
+ sc->left = effect->u.rumble.strong_magnitude / 256;
+ sc->right = effect->u.rumble.weak_magnitude ? 1 : 0;
- return hid->hid_output_raw_report(hid, buf, sizeof(buf),
- HID_OUTPUT_REPORT);
+ schedule_work(&sc->rumble_worker);
+ return 0;
}
static int sony_init_ff(struct hid_device *hdev)
struct hid_input *hidinput = list_entry(hdev->inputs.next,
struct hid_input, list);
struct input_dev *input_dev = hidinput->input;
+ struct sony_sc *sc = hid_get_drvdata(hdev);
+
+ sc->hdev = hdev;
+ INIT_WORK(&sc->rumble_worker, sony_rumble_worker);
input_set_capability(input_dev, EV_FF, FF_RUMBLE);
return input_ff_create_memless(input_dev, NULL, sony_play_effect);
}
+static void sony_destroy_ff(struct hid_device *hdev)
+{
+ struct sony_sc *sc = hid_get_drvdata(hdev);
+
+ cancel_work_sync(&sc->rumble_worker);
+}
+
#else
static int sony_init_ff(struct hid_device *hdev)
{
return 0;
}
+
+static void sony_destroy_ff(struct hid_device *hdev)
+{
+}
#endif
static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (sc->quirks & BUZZ_CONTROLLER)
buzz_remove(hdev);
+ sony_destroy_ff(hdev);
+
hid_hw_stop(hdev);
}
goto done;
}
- if (vendor == USB_VENDOR_ID_NINTENDO ||
- vendor == USB_VENDOR_ID_NINTENDO2) {
+ if (vendor == USB_VENDOR_ID_NINTENDO) {
if (product == USB_DEVICE_ID_NINTENDO_WIIMOTE) {
devtype = WIIMOTE_DEV_GEN10;
goto done;
static const struct hid_device_id wiimote_hid_devices[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
USB_DEVICE_ID_NINTENDO_WIIMOTE) },
- { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO2,
- USB_DEVICE_ID_NINTENDO_WIIMOTE) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
USB_DEVICE_ID_NINTENDO_WIIMOTE2) },
{ }
*/
struct uhid_create_req_compat *compat;
- compat = kmalloc(sizeof(*compat), GFP_KERNEL);
+ compat = kzalloc(sizeof(*compat), GFP_KERNEL);
if (!compat)
return -ENOMEM;
#include <linux/err.h>
#include <acpi/acpi.h>
-#include <acpi/acpixf.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/slab.h>
/* Hardware register offsets and field defintions */
{.compatible = "brcm,kona-i2c",},
{},
};
-MODULE_DEVICE_TABLE(of, kona_i2c_of_match);
+MODULE_DEVICE_TABLE(of, bcm_kona_i2c_of_match);
static struct platform_driver bcm_kona_i2c_driver = {
.driver = {
strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name));
adap->algo = &bcm2835_i2c_algo;
adap->dev.parent = &pdev->dev;
+ adap->dev.of_node = pdev->dev.of_node;
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0);
static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev,
int reg, u16 val)
{
- __raw_writew(val, i2c_dev->base + reg);
+ writew_relaxed(val, i2c_dev->base + reg);
}
static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
{
- return __raw_readw(i2c_dev->base + reg);
+ return readw_relaxed(i2c_dev->base + reg);
}
/* Generate a pulse on the i2c clock pin. */
#define USB_VENDOR_ID_DIOLAN 0x0abf
#define USB_DEVICE_ID_DIOLAN_U2C 0x3370
-#define DIOLAN_OUT_EP 0x02
-#define DIOLAN_IN_EP 0x84
/* commands via USB, must match command ids in the firmware */
#define CMD_I2C_READ 0x01
struct i2c_diolan_u2c {
u8 obuffer[DIOLAN_OUTBUF_LEN]; /* output buffer */
u8 ibuffer[DIOLAN_INBUF_LEN]; /* input buffer */
+ int ep_in, ep_out; /* Endpoints */
struct usb_device *usb_dev; /* the usb device for this device */
struct usb_interface *interface;/* the interface for this device */
struct i2c_adapter adapter; /* i2c related things */
return -EINVAL;
ret = usb_bulk_msg(dev->usb_dev,
- usb_sndbulkpipe(dev->usb_dev, DIOLAN_OUT_EP),
+ usb_sndbulkpipe(dev->usb_dev, dev->ep_out),
dev->obuffer, dev->olen, &actual,
DIOLAN_USB_TIMEOUT);
if (!ret) {
tmpret = usb_bulk_msg(dev->usb_dev,
usb_rcvbulkpipe(dev->usb_dev,
- DIOLAN_IN_EP),
+ dev->ep_in),
dev->ibuffer,
sizeof(dev->ibuffer), &actual,
DIOLAN_USB_TIMEOUT);
int ret;
ret = usb_bulk_msg(dev->usb_dev,
- usb_rcvbulkpipe(dev->usb_dev, DIOLAN_IN_EP),
+ usb_rcvbulkpipe(dev->usb_dev, dev->ep_in),
dev->ibuffer, sizeof(dev->ibuffer), &actual,
DIOLAN_USB_TIMEOUT);
if (ret < 0 || actual == 0)
static int diolan_u2c_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
+ struct usb_host_interface *hostif = interface->cur_altsetting;
struct i2c_diolan_u2c *dev;
int ret;
+ if (hostif->desc.bInterfaceNumber != 0
+ || hostif->desc.bNumEndpoints < 2)
+ return -ENODEV;
+
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
ret = -ENOMEM;
goto error;
}
+ dev->ep_out = hostif->endpoint[0].desc.bEndpointAddress;
+ dev->ep_in = hostif->endpoint[1].desc.bEndpointAddress;
dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
dev->interface = interface;
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
int reg, u16 val)
{
- __raw_writew(val, i2c_dev->base +
+ writew_relaxed(val, i2c_dev->base +
(i2c_dev->regs[reg] << i2c_dev->reg_shift));
}
static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
{
- return __raw_readw(i2c_dev->base +
+ return readw_relaxed(i2c_dev->base +
(i2c_dev->regs[reg] << i2c_dev->reg_shift));
}
};
#ifdef CONFIG_OF
+static struct omap_i2c_bus_platform_data omap2420_pdata = {
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .flags = OMAP_I2C_FLAG_NO_FIFO |
+ OMAP_I2C_FLAG_SIMPLE_CLOCK |
+ OMAP_I2C_FLAG_16BIT_DATA_REG |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
+};
+
+static struct omap_i2c_bus_platform_data omap2430_pdata = {
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
+ OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
+};
+
static struct omap_i2c_bus_platform_data omap3_pdata = {
.rev = OMAP_I2C_IP_VERSION_1,
.flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
.compatible = "ti,omap3-i2c",
.data = &omap3_pdata,
},
+ {
+ .compatible = "ti,omap2430-i2c",
+ .data = &omap2430_pdata,
+ },
+ {
+ .compatible = "ti,omap2420-i2c",
+ .data = &omap2420_pdata,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
* Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
* On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset.
* Also since the omap_i2c_read_reg uses reg_map_ip_* a
- * raw_readw is done.
+ * readw_relaxed is done.
*/
- rev = __raw_readw(dev->base + 0x04);
+ rev = readw_relaxed(dev->base + 0x04);
dev->scheme = OMAP_I2C_SCHEME(rev);
switch (dev->scheme) {
{
.enter = NULL }
};
-static struct cpuidle_state avn_cstates[CPUIDLE_STATE_MAX] = {
+static struct cpuidle_state avn_cstates[] __initdata = {
{
.name = "C1-AVN",
.desc = "MWAIT 0x00",
{
.name = "C6-AVN",
.desc = "MWAIT 0x51",
- .flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x51) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 15,
.target_residency = 45,
.enter = &intel_idle },
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&accel_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct accel_3d_state *accel_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&accel_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
mutex_lock(&st->buf_lock);
st->tx[0] = KXSD9_READ(address);
ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
- if (ret)
- return ret;
- return (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
+ if (!ret)
+ ret = (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
+ mutex_unlock(&st->buf_lock);
+ return ret;
}
static IIO_CONST_ATTR(accel_scale_available,
} else {
if (!st->caps->has_tsmr) {
dev_err(&pdev->dev, "We don't support non-TSMR adc\n");
+ ret = -ENODEV;
goto error_disable_adc_clk;
}
/* sample rates to sign extension table */
static const int mcp3422_sign_extend[4] = {
- [MCP3422_SRATE_240] = 12,
- [MCP3422_SRATE_60] = 14,
- [MCP3422_SRATE_15] = 16,
- [MCP3422_SRATE_3] = 18 };
+ [MCP3422_SRATE_240] = 11,
+ [MCP3422_SRATE_60] = 13,
+ [MCP3422_SRATE_15] = 15,
+ [MCP3422_SRATE_3] = 17 };
/* Client data (each client gets its own) */
struct mcp3422 {
unsigned long flags,
const struct iio_buffer_setup_ops *setup_ops)
{
+ struct iio_buffer *buffer;
int ret;
- indio_dev->buffer = iio_kfifo_allocate(indio_dev);
- if (!indio_dev->buffer)
+ buffer = iio_kfifo_allocate(indio_dev);
+ if (!buffer)
return -ENOMEM;
+ iio_device_attach_buffer(indio_dev, buffer);
+
ret = request_threaded_irq(irq, pollfunc_th, pollfunc_bh,
flags, indio_dev->name, indio_dev);
if (ret)
return 0;
}
-void hid_sensor_remove_trigger(struct iio_dev *indio_dev)
+void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
{
- iio_trigger_unregister(indio_dev->trig);
- iio_trigger_free(indio_dev->trig);
- indio_dev->trig = NULL;
+ iio_trigger_unregister(attrb->trigger);
+ iio_trigger_free(attrb->trigger);
}
EXPORT_SYMBOL(hid_sensor_remove_trigger);
dev_err(&indio_dev->dev, "Trigger Register Failed\n");
goto error_free_trig;
}
- indio_dev->trig = trig;
+ indio_dev->trig = attrb->trigger = trig;
return ret;
int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
struct hid_sensor_common *attrb);
-void hid_sensor_remove_trigger(struct iio_dev *indio_dev);
+void hid_sensor_remove_trigger(struct hid_sensor_common *attrb);
#endif
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&gyro_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&gyro_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
config TCS3472
tristate "TAOS TCS3472 color light-to-digital converter"
depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for the TAOS TCS3472
family of color light-to-digital converters with IR filter.
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&als_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct als_state *als_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&als_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
config MAG3110
tristate "Freescale MAG3110 3-Axis Magnetometer"
depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the Freescale MAG3110 3-Axis
magnetometer.
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&magn_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct magn_3d_state *magn_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&magn_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
BIT(IIO_CHAN_INFO_SCALE), \
.scan_index = idx, \
- .scan_type = IIO_ST('s', 16, 16, IIO_BE), \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
}
static const struct iio_chan_spec mag3110_channels[] = {
if (WARN_ON(down_interruptible(&i8042tregs)))
return -1;
- if (hp_sdc_enqueue_transaction(&t)) return -1;
+ if (hp_sdc_enqueue_transaction(&t)) {
+ up(&i8042tregs);
+ return -1;
+ }
/* Sleep until results come back. */
if (WARN_ON(down_interruptible(&i8042tregs)))
To compile this driver as a module, choose M here: the
module will be called stmpe-ts.
+config TOUCHSCREEN_SUR40
+ tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
+ depends on USB
+ select INPUT_POLLDEV
+ help
+ Say Y here if you want support for the Samsung SUR40 touchscreen
+ (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
+
+ To compile this driver as a module, choose M here: the
+ module will be called sur40.
+
config TOUCHSCREEN_TPS6507X
tristate "TPS6507x based touchscreens"
depends on I2C
obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o
obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
+obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o
obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o
obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
}
#ifdef CONFIG_PM_SLEEP
-static int atmel_wm97xx_suspend(struct *dev)
+static int atmel_wm97xx_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev);
dev_vdbg(cd->dev, "%s: Watchdog timer triggered\n", __func__);
- if (!work_pending(&cd->watchdog_work))
- schedule_work(&cd->watchdog_work);
+ schedule_work(&cd->watchdog_work);
return;
}
--- /dev/null
+/*
+ * Surface2.0/SUR40/PixelSense input driver
+ *
+ * Copyright (c) 2013 by Florian 'floe' Echtler <floe@butterbrot.org>
+ *
+ * Derived from the USB Skeleton driver 1.1,
+ * Copyright (c) 2003 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * and from the Apple USB BCM5974 multitouch driver,
+ * Copyright (c) 2008 Henrik Rydberg (rydberg@euromail.se)
+ *
+ * and from the generic hid-multitouch driver,
+ * Copyright (c) 2010-2012 Stephane Chatty <chatty@enac.fr>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/printk.h>
+#include <linux/input-polldev.h>
+#include <linux/input/mt.h>
+#include <linux/usb/input.h>
+
+/* read 512 bytes from endpoint 0x86 -> get header + blobs */
+struct sur40_header {
+
+ __le16 type; /* always 0x0001 */
+ __le16 count; /* count of blobs (if 0: continue prev. packet) */
+
+ __le32 packet_id; /* unique ID for all packets in one frame */
+
+ __le32 timestamp; /* milliseconds (inc. by 16 or 17 each frame) */
+ __le32 unknown; /* "epoch?" always 02/03 00 00 00 */
+
+} __packed;
+
+struct sur40_blob {
+
+ __le16 blob_id;
+
+ u8 action; /* 0x02 = enter/exit, 0x03 = update (?) */
+ u8 unknown; /* always 0x01 or 0x02 (no idea what this is?) */
+
+ __le16 bb_pos_x; /* upper left corner of bounding box */
+ __le16 bb_pos_y;
+
+ __le16 bb_size_x; /* size of bounding box */
+ __le16 bb_size_y;
+
+ __le16 pos_x; /* finger tip position */
+ __le16 pos_y;
+
+ __le16 ctr_x; /* centroid position */
+ __le16 ctr_y;
+
+ __le16 axis_x; /* somehow related to major/minor axis, mostly: */
+ __le16 axis_y; /* axis_x == bb_size_y && axis_y == bb_size_x */
+
+ __le32 angle; /* orientation in radians relative to x axis -
+ actually an IEEE754 float, don't use in kernel */
+
+ __le32 area; /* size in pixels/pressure (?) */
+
+ u8 padding[32];
+
+} __packed;
+
+/* combined header/blob data */
+struct sur40_data {
+ struct sur40_header header;
+ struct sur40_blob blobs[];
+} __packed;
+
+
+/* version information */
+#define DRIVER_SHORT "sur40"
+#define DRIVER_AUTHOR "Florian 'floe' Echtler <floe@butterbrot.org>"
+#define DRIVER_DESC "Surface2.0/SUR40/PixelSense input driver"
+
+/* vendor and device IDs */
+#define ID_MICROSOFT 0x045e
+#define ID_SUR40 0x0775
+
+/* sensor resolution */
+#define SENSOR_RES_X 1920
+#define SENSOR_RES_Y 1080
+
+/* touch data endpoint */
+#define TOUCH_ENDPOINT 0x86
+
+/* polling interval (ms) */
+#define POLL_INTERVAL 10
+
+/* maximum number of contacts FIXME: this is a guess? */
+#define MAX_CONTACTS 64
+
+/* control commands */
+#define SUR40_GET_VERSION 0xb0 /* 12 bytes string */
+#define SUR40_UNKNOWN1 0xb3 /* 5 bytes */
+#define SUR40_UNKNOWN2 0xc1 /* 24 bytes */
+
+#define SUR40_GET_STATE 0xc5 /* 4 bytes state (?) */
+#define SUR40_GET_SENSORS 0xb1 /* 8 bytes sensors */
+
+/*
+ * Note: an earlier, non-public version of this driver used USB_RECIP_ENDPOINT
+ * here by mistake which is very likely to have corrupted the firmware EEPROM
+ * on two separate SUR40 devices. Thanks to Alan Stern who spotted this bug.
+ * Should you ever run into a similar problem, the background story to this
+ * incident and instructions on how to fix the corrupted EEPROM are available
+ * at https://floe.butterbrot.org/matrix/hacking/surface/brick.html
+*/
+
+struct sur40_state {
+
+ struct usb_device *usbdev;
+ struct device *dev;
+ struct input_polled_dev *input;
+
+ struct sur40_data *bulk_in_buffer;
+ size_t bulk_in_size;
+ u8 bulk_in_epaddr;
+
+ char phys[64];
+};
+
+static int sur40_command(struct sur40_state *dev,
+ u8 command, u16 index, void *buffer, u16 size)
+{
+ return usb_control_msg(dev->usbdev, usb_rcvctrlpipe(dev->usbdev, 0),
+ command,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x00, index, buffer, size, 1000);
+}
+
+/* Initialization routine, called from sur40_open */
+static int sur40_init(struct sur40_state *dev)
+{
+ int result;
+ u8 buffer[24];
+
+ /* stupidly replay the original MS driver init sequence */
+ result = sur40_command(dev, SUR40_GET_VERSION, 0x00, buffer, 12);
+ if (result < 0)
+ return result;
+
+ result = sur40_command(dev, SUR40_GET_VERSION, 0x01, buffer, 12);
+ if (result < 0)
+ return result;
+
+ result = sur40_command(dev, SUR40_GET_VERSION, 0x02, buffer, 12);
+ if (result < 0)
+ return result;
+
+ result = sur40_command(dev, SUR40_UNKNOWN2, 0x00, buffer, 24);
+ if (result < 0)
+ return result;
+
+ result = sur40_command(dev, SUR40_UNKNOWN1, 0x00, buffer, 5);
+ if (result < 0)
+ return result;
+
+ result = sur40_command(dev, SUR40_GET_VERSION, 0x03, buffer, 12);
+
+ /*
+ * Discard the result buffer - no known data inside except
+ * some version strings, maybe extract these sometime...
+ */
+
+ return result;
+}
+
+/*
+ * Callback routines from input_polled_dev
+ */
+
+/* Enable the device, polling will now start. */
+static void sur40_open(struct input_polled_dev *polldev)
+{
+ struct sur40_state *sur40 = polldev->private;
+
+ dev_dbg(sur40->dev, "open\n");
+ sur40_init(sur40);
+}
+
+/* Disable device, polling has stopped. */
+static void sur40_close(struct input_polled_dev *polldev)
+{
+ struct sur40_state *sur40 = polldev->private;
+
+ dev_dbg(sur40->dev, "close\n");
+ /*
+ * There is no known way to stop the device, so we simply
+ * stop polling.
+ */
+}
+
+/*
+ * This function is called when a whole contact has been processed,
+ * so that it can assign it to a slot and store the data there.
+ */
+static void sur40_report_blob(struct sur40_blob *blob, struct input_dev *input)
+{
+ int wide, major, minor;
+
+ int bb_size_x = le16_to_cpu(blob->bb_size_x);
+ int bb_size_y = le16_to_cpu(blob->bb_size_y);
+
+ int pos_x = le16_to_cpu(blob->pos_x);
+ int pos_y = le16_to_cpu(blob->pos_y);
+
+ int ctr_x = le16_to_cpu(blob->ctr_x);
+ int ctr_y = le16_to_cpu(blob->ctr_y);
+
+ int slotnum = input_mt_get_slot_by_key(input, blob->blob_id);
+ if (slotnum < 0 || slotnum >= MAX_CONTACTS)
+ return;
+
+ input_mt_slot(input, slotnum);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, 1);
+ wide = (bb_size_x > bb_size_y);
+ major = max(bb_size_x, bb_size_y);
+ minor = min(bb_size_x, bb_size_y);
+
+ input_report_abs(input, ABS_MT_POSITION_X, pos_x);
+ input_report_abs(input, ABS_MT_POSITION_Y, pos_y);
+ input_report_abs(input, ABS_MT_TOOL_X, ctr_x);
+ input_report_abs(input, ABS_MT_TOOL_Y, ctr_y);
+
+ /* TODO: use a better orientation measure */
+ input_report_abs(input, ABS_MT_ORIENTATION, wide);
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, major);
+ input_report_abs(input, ABS_MT_TOUCH_MINOR, minor);
+}
+
+/* core function: poll for new input data */
+static void sur40_poll(struct input_polled_dev *polldev)
+{
+
+ struct sur40_state *sur40 = polldev->private;
+ struct input_dev *input = polldev->input;
+ int result, bulk_read, need_blobs, packet_blobs, i;
+ u32 packet_id;
+
+ struct sur40_header *header = &sur40->bulk_in_buffer->header;
+ struct sur40_blob *inblob = &sur40->bulk_in_buffer->blobs[0];
+
+ dev_dbg(sur40->dev, "poll\n");
+
+ need_blobs = -1;
+
+ do {
+
+ /* perform a blocking bulk read to get data from the device */
+ result = usb_bulk_msg(sur40->usbdev,
+ usb_rcvbulkpipe(sur40->usbdev, sur40->bulk_in_epaddr),
+ sur40->bulk_in_buffer, sur40->bulk_in_size,
+ &bulk_read, 1000);
+
+ dev_dbg(sur40->dev, "received %d bytes\n", bulk_read);
+
+ if (result < 0) {
+ dev_err(sur40->dev, "error in usb_bulk_read\n");
+ return;
+ }
+
+ result = bulk_read - sizeof(struct sur40_header);
+
+ if (result % sizeof(struct sur40_blob) != 0) {
+ dev_err(sur40->dev, "transfer size mismatch\n");
+ return;
+ }
+
+ /* first packet? */
+ if (need_blobs == -1) {
+ need_blobs = le16_to_cpu(header->count);
+ dev_dbg(sur40->dev, "need %d blobs\n", need_blobs);
+ packet_id = header->packet_id;
+ }
+
+ /*
+ * Sanity check. when video data is also being retrieved, the
+ * packet ID will usually increase in the middle of a series
+ * instead of at the end.
+ */
+ if (packet_id != header->packet_id)
+ dev_warn(sur40->dev, "packet ID mismatch\n");
+
+ packet_blobs = result / sizeof(struct sur40_blob);
+ dev_dbg(sur40->dev, "received %d blobs\n", packet_blobs);
+
+ /* packets always contain at least 4 blobs, even if empty */
+ if (packet_blobs > need_blobs)
+ packet_blobs = need_blobs;
+
+ for (i = 0; i < packet_blobs; i++) {
+ need_blobs--;
+ dev_dbg(sur40->dev, "processing blob\n");
+ sur40_report_blob(&(inblob[i]), input);
+ }
+
+ } while (need_blobs > 0);
+
+ input_mt_sync_frame(input);
+ input_sync(input);
+}
+
+/* Initialize input device parameters. */
+static void sur40_input_setup(struct input_dev *input_dev)
+{
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(EV_ABS, input_dev->evbit);
+
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+ 0, SENSOR_RES_X, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+ 0, SENSOR_RES_Y, 0, 0);
+
+ input_set_abs_params(input_dev, ABS_MT_TOOL_X,
+ 0, SENSOR_RES_X, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOOL_Y,
+ 0, SENSOR_RES_Y, 0, 0);
+
+ /* max value unknown, but major/minor axis
+ * can never be larger than screen */
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+ 0, SENSOR_RES_X, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+ 0, SENSOR_RES_Y, 0, 0);
+
+ input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+
+ input_mt_init_slots(input_dev, MAX_CONTACTS,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+}
+
+/* Check candidate USB interface. */
+static int sur40_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usbdev = interface_to_usbdev(interface);
+ struct sur40_state *sur40;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ struct input_polled_dev *poll_dev;
+ int error;
+
+ /* Check if we really have the right interface. */
+ iface_desc = &interface->altsetting[0];
+ if (iface_desc->desc.bInterfaceClass != 0xFF)
+ return -ENODEV;
+
+ /* Use endpoint #4 (0x86). */
+ endpoint = &iface_desc->endpoint[4].desc;
+ if (endpoint->bEndpointAddress != TOUCH_ENDPOINT)
+ return -ENODEV;
+
+ /* Allocate memory for our device state and initialize it. */
+ sur40 = kzalloc(sizeof(struct sur40_state), GFP_KERNEL);
+ if (!sur40)
+ return -ENOMEM;
+
+ poll_dev = input_allocate_polled_device();
+ if (!poll_dev) {
+ error = -ENOMEM;
+ goto err_free_dev;
+ }
+
+ /* Set up polled input device control structure */
+ poll_dev->private = sur40;
+ poll_dev->poll_interval = POLL_INTERVAL;
+ poll_dev->open = sur40_open;
+ poll_dev->poll = sur40_poll;
+ poll_dev->close = sur40_close;
+
+ /* Set up regular input device structure */
+ sur40_input_setup(poll_dev->input);
+
+ poll_dev->input->name = "Samsung SUR40";
+ usb_to_input_id(usbdev, &poll_dev->input->id);
+ usb_make_path(usbdev, sur40->phys, sizeof(sur40->phys));
+ strlcat(sur40->phys, "/input0", sizeof(sur40->phys));
+ poll_dev->input->phys = sur40->phys;
+ poll_dev->input->dev.parent = &interface->dev;
+
+ sur40->usbdev = usbdev;
+ sur40->dev = &interface->dev;
+ sur40->input = poll_dev;
+
+ /* use the bulk-in endpoint tested above */
+ sur40->bulk_in_size = usb_endpoint_maxp(endpoint);
+ sur40->bulk_in_epaddr = endpoint->bEndpointAddress;
+ sur40->bulk_in_buffer = kmalloc(sur40->bulk_in_size, GFP_KERNEL);
+ if (!sur40->bulk_in_buffer) {
+ dev_err(&interface->dev, "Unable to allocate input buffer.");
+ error = -ENOMEM;
+ goto err_free_polldev;
+ }
+
+ error = input_register_polled_device(poll_dev);
+ if (error) {
+ dev_err(&interface->dev,
+ "Unable to register polled input device.");
+ goto err_free_buffer;
+ }
+
+ /* we can register the device now, as it is ready */
+ usb_set_intfdata(interface, sur40);
+ dev_dbg(&interface->dev, "%s is now attached\n", DRIVER_DESC);
+
+ return 0;
+
+err_free_buffer:
+ kfree(sur40->bulk_in_buffer);
+err_free_polldev:
+ input_free_polled_device(sur40->input);
+err_free_dev:
+ kfree(sur40);
+
+ return error;
+}
+
+/* Unregister device & clean up. */
+static void sur40_disconnect(struct usb_interface *interface)
+{
+ struct sur40_state *sur40 = usb_get_intfdata(interface);
+
+ input_unregister_polled_device(sur40->input);
+ input_free_polled_device(sur40->input);
+ kfree(sur40->bulk_in_buffer);
+ kfree(sur40);
+
+ usb_set_intfdata(interface, NULL);
+ dev_dbg(&interface->dev, "%s is now disconnected\n", DRIVER_DESC);
+}
+
+static const struct usb_device_id sur40_table[] = {
+ { USB_DEVICE(ID_MICROSOFT, ID_SUR40) }, /* Samsung SUR40 */
+ { } /* terminating null entry */
+};
+MODULE_DEVICE_TABLE(usb, sur40_table);
+
+/* USB-specific object needed to register this driver with the USB subsystem. */
+static struct usb_driver sur40_driver = {
+ .name = DRIVER_SHORT,
+ .probe = sur40_probe,
+ .disconnect = sur40_disconnect,
+ .id_table = sur40_table,
+};
+
+module_usb_driver(sur40_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
if (WARN_ON(!gic->domain))
return;
+ if (gic_nr == 0) {
#ifdef CONFIG_SMP
- set_smp_cross_call(gic_raise_softirq);
- register_cpu_notifier(&gic_cpu_notifier);
+ set_smp_cross_call(gic_raise_softirq);
+ register_cpu_notifier(&gic_cpu_notifier);
#endif
-
- set_handle_irq(gic_handle_irq);
+ set_handle_irq(gic_handle_irq);
+ }
gic_chip.flags |= gic_arch_extn.flags;
gic_dist_init(gic);
(sizeof(struct led_pwm_data) * num_leds);
}
-static struct led_pwm_priv *led_pwm_create_of(struct platform_device *pdev)
+static int led_pwm_create_of(struct platform_device *pdev,
+ struct led_pwm_priv *priv)
{
struct device_node *node = pdev->dev.of_node;
struct device_node *child;
- struct led_pwm_priv *priv;
- int count, ret;
-
- /* count LEDs in this device, so we know how much to allocate */
- count = of_get_child_count(node);
- if (!count)
- return NULL;
-
- priv = devm_kzalloc(&pdev->dev, sizeof_pwm_leds_priv(count),
- GFP_KERNEL);
- if (!priv)
- return NULL;
+ int ret;
for_each_child_of_node(node, child) {
struct led_pwm_data *led_dat = &priv->leds[priv->num_leds];
if (IS_ERR(led_dat->pwm)) {
dev_err(&pdev->dev, "unable to request PWM for %s\n",
led_dat->cdev.name);
+ ret = PTR_ERR(led_dat->pwm);
goto err;
}
/* Get the period from PWM core when n*/
priv->num_leds++;
}
- return priv;
+ return 0;
err:
while (priv->num_leds--)
led_classdev_unregister(&priv->leds[priv->num_leds].cdev);
- return NULL;
+ return ret;
}
static int led_pwm_probe(struct platform_device *pdev)
{
struct led_pwm_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct led_pwm_priv *priv;
- int i, ret = 0;
+ int count, i;
+ int ret = 0;
+
+ if (pdata)
+ count = pdata->num_leds;
+ else
+ count = of_get_child_count(pdev->dev.of_node);
+
+ if (!count)
+ return -EINVAL;
- if (pdata && pdata->num_leds) {
- priv = devm_kzalloc(&pdev->dev,
- sizeof_pwm_leds_priv(pdata->num_leds),
- GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
+ priv = devm_kzalloc(&pdev->dev, sizeof_pwm_leds_priv(count),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
- for (i = 0; i < pdata->num_leds; i++) {
+ if (pdata) {
+ for (i = 0; i < count; i++) {
struct led_pwm *cur_led = &pdata->leds[i];
struct led_pwm_data *led_dat = &priv->leds[i];
if (ret < 0)
goto err;
}
- priv->num_leds = pdata->num_leds;
+ priv->num_leds = count;
} else {
- priv = led_pwm_create_of(pdev);
- if (!priv)
- return -ENODEV;
+ ret = led_pwm_create_of(pdev, priv);
+ if (ret)
+ return ret;
}
platform_set_drvdata(pdev, priv);
windfarm_ad7417_sensor.o \
windfarm_lm75_sensor.o \
windfarm_lm87_sensor.o \
+ windfarm_max6690_sensor.o \
windfarm_pid.o \
windfarm_cpufreq_clamp.o \
windfarm_rm31.o
finish_wait(&mddev->sb_wait, &wq);
}
-static void bi_complete(struct bio *bio, int error)
-{
- complete((struct completion*)bio->bi_private);
-}
-
int sync_page_io(struct md_rdev *rdev, sector_t sector, int size,
struct page *page, int rw, bool metadata_op)
{
struct bio *bio = bio_alloc_mddev(GFP_NOIO, 1, rdev->mddev);
- struct completion event;
int ret;
rw |= REQ_SYNC;
else
bio->bi_sector = sector + rdev->data_offset;
bio_add_page(bio, page, size, 0);
- init_completion(&event);
- bio->bi_private = &event;
- bio->bi_end_io = bi_complete;
- submit_bio(rw, bio);
- wait_for_completion(&event);
+ submit_bio_wait(rw, bio);
ret = test_bit(BIO_UPTODATE, &bio->bi_flags);
bio_put(bio);
if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
return;
if ( ! (
- (mddev->flags & ~ (1<<MD_CHANGE_PENDING)) ||
+ (mddev->flags & MD_UPDATE_SB_FLAGS & ~ (1<<MD_CHANGE_PENDING)) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
test_bit(MD_RECOVERY_DONE, &mddev->recovery) ||
(mddev->external == 0 && mddev->safemode == 1) ||
} else
init_stripe(sh, sector, previous);
} else {
+ spin_lock(&conf->device_lock);
if (atomic_read(&sh->count)) {
BUG_ON(!list_empty(&sh->lru)
&& !test_bit(STRIPE_EXPANDING, &sh->state)
&& !test_bit(STRIPE_ON_UNPLUG_LIST, &sh->state)
- && !test_bit(STRIPE_ON_RELEASE_LIST, &sh->state));
+ );
} else {
- spin_lock(&conf->device_lock);
if (!test_bit(STRIPE_HANDLE, &sh->state))
atomic_inc(&conf->active_stripes);
- if (list_empty(&sh->lru) &&
- !test_bit(STRIPE_ON_RELEASE_LIST, &sh->state) &&
- !test_bit(STRIPE_EXPANDING, &sh->state))
- BUG();
+ BUG_ON(list_empty(&sh->lru));
list_del_init(&sh->lru);
if (sh->group) {
sh->group->stripes_cnt--;
sh->group = NULL;
}
- spin_unlock(&conf->device_lock);
}
+ spin_unlock(&conf->device_lock);
}
} while (sh == NULL);
for (i = 0; i < *group_cnt; i++) {
struct r5worker_group *group;
- group = worker_groups[i];
+ group = &(*worker_groups)[i];
INIT_LIST_HEAD(&group->handle_list);
group->conf = conf;
group->workers = workers + i * cnt;
{
char name[ENCLOSURE_NAME_SIZE];
+ /*
+ * In odd circumstances, like multipath devices, something else may
+ * already have removed the links, so check for this condition first.
+ */
+ if (!cdev->dev->kobj.sd)
+ return;
+
enclosure_link_name(cdev, name);
sysfs_remove_link(&cdev->dev->kobj, name);
sysfs_remove_link(&cdev->cdev.kobj, "device");
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
+#include <linux/of.h>
#include <linux/omap-dma.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#define OMAP_MMC_CMDTYPE_AC 2
#define OMAP_MMC_CMDTYPE_ADTC 3
-#define OMAP_DMA_MMC_TX 21
-#define OMAP_DMA_MMC_RX 22
-#define OMAP_DMA_MMC2_TX 54
-#define OMAP_DMA_MMC2_RX 55
-
-#define OMAP24XX_DMA_MMC2_TX 47
-#define OMAP24XX_DMA_MMC2_RX 48
-#define OMAP24XX_DMA_MMC1_TX 61
-#define OMAP24XX_DMA_MMC1_RX 62
-
-
#define DRIVER_NAME "mmci-omap"
/* Specifies how often in millisecs to poll for card status changes
struct mmc_omap_host *host = NULL;
struct resource *res;
dma_cap_mask_t mask;
- unsigned sig;
+ unsigned sig = 0;
int i, ret = 0;
int irq;
}
if (pdata->nr_slots == 0) {
dev_err(&pdev->dev, "no slots\n");
- return -ENXIO;
+ return -EPROBE_DEFER;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->dma_tx_burst = -1;
host->dma_rx_burst = -1;
- if (mmc_omap2())
- sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX;
- else
- sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
- host->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+ res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
+ if (res)
+ sig = res->start;
+ host->dma_tx = dma_request_slave_channel_compat(mask,
+ omap_dma_filter_fn, &sig, &pdev->dev, "tx");
if (!host->dma_tx)
dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
sig);
- if (mmc_omap2())
- sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX;
- else
- sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
- host->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
+ if (res)
+ sig = res->start;
+ host->dma_rx = dma_request_slave_channel_compat(mask,
+ omap_dma_filter_fn, &sig, &pdev->dev, "rx");
if (!host->dma_rx)
dev_warn(host->dev, "unable to obtain RX DMA engine channel %u\n",
sig);
return 0;
}
+#if IS_BUILTIN(CONFIG_OF)
+static const struct of_device_id mmc_omap_match[] = {
+ { .compatible = "ti,omap2420-mmc", },
+ { },
+};
+#endif
+
static struct platform_driver mmc_omap_driver = {
.probe = mmc_omap_probe,
.remove = mmc_omap_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(mmc_omap_match),
},
};
if (!miimon) {
pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
pr_warning("Forcing miimon to 100msec\n");
- miimon = 100;
+ miimon = BOND_DEFAULT_MIIMON;
}
}
if (!miimon) {
pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure and link speed which are essential for TLB/ALB load balancing\n");
pr_warning("Forcing miimon to 100msec\n");
- miimon = 100;
+ miimon = BOND_DEFAULT_MIIMON;
}
}
return -EPERM;
}
- if (BOND_MODE_IS_LB(mode) && bond->params.arp_interval) {
- pr_err("%s: %s mode is incompatible with arp monitoring.\n",
- bond->dev->name, bond_mode_tbl[mode].modename);
- return -EINVAL;
+ if (BOND_NO_USES_ARP(mode) && bond->params.arp_interval) {
+ pr_info("%s: %s mode is incompatible with arp monitoring, start mii monitoring\n",
+ bond->dev->name, bond_mode_tbl[mode].modename);
+ /* disable arp monitoring */
+ bond->params.arp_interval = 0;
+ /* set miimon to default value */
+ bond->params.miimon = BOND_DEFAULT_MIIMON;
+ pr_info("%s: Setting MII monitoring interval to %d.\n",
+ bond->dev->name, bond->params.miimon);
}
/* don't cache arp_validate between modes */
ret = -EINVAL;
goto out;
}
- if (bond->params.mode == BOND_MODE_ALB ||
- bond->params.mode == BOND_MODE_TLB ||
- bond->params.mode == BOND_MODE_8023AD) {
+ if (BOND_NO_USES_ARP(bond->params.mode)) {
pr_info("%s: ARP monitoring cannot be used with ALB/TLB/802.3ad. Only MII monitoring is supported on %s.\n",
bond->dev->name, bond->dev->name);
ret = -EINVAL;
#define BOND_MAX_ARP_TARGETS 16
+#define BOND_DEFAULT_MIIMON 100
+
#define IS_UP(dev) \
((((dev)->flags & IFF_UP) == IFF_UP) && \
netif_running(dev) && \
((mode) == BOND_MODE_TLB) || \
((mode) == BOND_MODE_ALB))
+#define BOND_NO_USES_ARP(mode) \
+ (((mode) == BOND_MODE_8023AD) || \
+ ((mode) == BOND_MODE_TLB) || \
+ ((mode) == BOND_MODE_ALB))
+
#define TX_QUEUE_OVERRIDE(mode) \
(((mode) == BOND_MODE_ACTIVEBACKUP) || \
((mode) == BOND_MODE_ROUNDROBIN))
return 0;
}
-static int c_can_get_berr_counter(const struct net_device *dev,
- struct can_berr_counter *bec)
+static int __c_can_get_berr_counter(const struct net_device *dev,
+ struct can_berr_counter *bec)
{
unsigned int reg_err_counter;
struct c_can_priv *priv = netdev_priv(dev);
- c_can_pm_runtime_get_sync(priv);
-
reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
bec->rxerr = (reg_err_counter & ERR_CNT_REC_MASK) >>
ERR_CNT_REC_SHIFT;
bec->txerr = reg_err_counter & ERR_CNT_TEC_MASK;
+ return 0;
+}
+
+static int c_can_get_berr_counter(const struct net_device *dev,
+ struct can_berr_counter *bec)
+{
+ struct c_can_priv *priv = netdev_priv(dev);
+ int err;
+
+ c_can_pm_runtime_get_sync(priv);
+ err = __c_can_get_berr_counter(dev, bec);
c_can_pm_runtime_put_sync(priv);
- return 0;
+ return err;
}
/*
if (!(val & (1 << (msg_obj_no - 1)))) {
can_get_echo_skb(dev,
msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
+ c_can_object_get(dev, 0, msg_obj_no, IF_COMM_ALL);
stats->tx_bytes += priv->read_reg(priv,
C_CAN_IFACE(MSGCTRL_REG, 0))
& IF_MCONT_DLC_MASK;
if (unlikely(!skb))
return 0;
- c_can_get_berr_counter(dev, &bec);
+ __c_can_get_berr_counter(dev, &bec);
reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG);
rx_err_passive = (reg_err_counter & ERR_CNT_RP_MASK) >>
ERR_CNT_RP_SHIFT;
dev_err(&pdev->dev, "no ipg clock defined\n");
return PTR_ERR(clk_ipg);
}
- clock_freq = clk_get_rate(clk_ipg);
clk_per = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(clk_per)) {
dev_err(&pdev->dev, "no per clock defined\n");
return PTR_ERR(clk_per);
}
+ clock_freq = clk_get_rate(clk_per);
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
uint8_t isrc, status;
int n = 0;
- /* Shared interrupts and IRQ off? */
- if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF)
- return IRQ_NONE;
-
if (priv->pre_irq)
priv->pre_irq(priv);
+ /* Shared interrupts and IRQ off? */
+ if (priv->read_reg(priv, SJA1000_IER) == IRQ_OFF)
+ goto out;
+
while ((isrc = priv->read_reg(priv, SJA1000_IR)) &&
(n < SJA1000_MAX_IRQ)) {
- n++;
+
status = priv->read_reg(priv, SJA1000_SR);
/* check for absent controller due to hw unplug */
if (status == 0xFF && sja1000_is_absent(priv))
- return IRQ_NONE;
+ goto out;
if (isrc & IRQ_WUI)
netdev_warn(dev, "wakeup interrupt\n");
status = priv->read_reg(priv, SJA1000_SR);
/* check for absent controller */
if (status == 0xFF && sja1000_is_absent(priv))
- return IRQ_NONE;
+ goto out;
}
}
if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {
if (sja1000_err(dev, isrc, status))
break;
}
+ n++;
}
-
+out:
if (priv->post_irq)
priv->post_irq(priv);
static ssize_t tg3_show_temp(struct device *dev,
struct device_attribute *devattr, char *buf)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct tg3 *tp = netdev_priv(netdev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct tg3 *tp = dev_get_drvdata(dev);
u32 temperature;
spin_lock_bh(&tp->lock);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, tg3_show_temp, NULL,
TG3_TEMP_MAX_OFFSET);
-static struct attribute *tg3_attributes[] = {
+static struct attribute *tg3_attrs[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
NULL
};
-
-static const struct attribute_group tg3_group = {
- .attrs = tg3_attributes,
-};
+ATTRIBUTE_GROUPS(tg3);
static void tg3_hwmon_close(struct tg3 *tp)
{
if (tp->hwmon_dev) {
hwmon_device_unregister(tp->hwmon_dev);
tp->hwmon_dev = NULL;
- sysfs_remove_group(&tp->pdev->dev.kobj, &tg3_group);
}
}
static void tg3_hwmon_open(struct tg3 *tp)
{
- int i, err;
+ int i;
u32 size = 0;
struct pci_dev *pdev = tp->pdev;
struct tg3_ocir ocirs[TG3_SD_NUM_RECS];
if (!size)
return;
- /* Register hwmon sysfs hooks */
- err = sysfs_create_group(&pdev->dev.kobj, &tg3_group);
- if (err) {
- dev_err(&pdev->dev, "Cannot create sysfs group, aborting\n");
- return;
- }
-
- tp->hwmon_dev = hwmon_device_register(&pdev->dev);
+ tp->hwmon_dev = hwmon_device_register_with_groups(&pdev->dev, "tg3",
+ tp, tg3_groups);
if (IS_ERR(tp->hwmon_dev)) {
tp->hwmon_dev = NULL;
dev_err(&pdev->dev, "Cannot register hwmon device, aborting\n");
- sysfs_remove_group(&pdev->dev.kobj, &tg3_group);
}
}
};
#define be_physfn(adapter) (!adapter->virtfn)
+#define be_virtfn(adapter) (adapter->virtfn)
#define sriov_enabled(adapter) (adapter->num_vfs > 0)
#define sriov_want(adapter) (be_physfn(adapter) && \
(num_vfs || pci_num_vf(adapter->pdev)))
} else {
req->hdr.version = 2;
req->page_size = 1; /* 1 for 4K */
+
+ /* coalesce-wm field in this cmd is not relevant to Lancer.
+ * Lancer uses COMMON_MODIFY_CQ to set this field
+ */
+ if (!lancer_chip(adapter))
+ AMAP_SET_BITS(struct amap_cq_context_v2, coalescwm,
+ ctxt, coalesce_wm);
AMAP_SET_BITS(struct amap_cq_context_v2, nodelay, ctxt,
no_delay);
AMAP_SET_BITS(struct amap_cq_context_v2, count, ctxt,
be_roce_dev_close(adapter);
- for_all_evt_queues(adapter, eqo, i) {
- if (adapter->flags & BE_FLAGS_NAPI_ENABLED) {
+ if (adapter->flags & BE_FLAGS_NAPI_ENABLED) {
+ for_all_evt_queues(adapter, eqo, i) {
napi_disable(&eqo->napi);
be_disable_busy_poll(eqo);
}
memcpy(mac, adapter->netdev->dev_addr, ETH_ALEN);
}
- /* On BE3 VFs this cmd may fail due to lack of privilege.
- * Ignore the failure as in this case pmac_id is fetched
- * in the IFACE_CREATE cmd.
- */
- be_cmd_pmac_add(adapter, mac, adapter->if_handle,
- &adapter->pmac_id[0], 0);
+ /* For BE3-R VFs, the PF programs the initial MAC address */
+ if (!(BEx_chip(adapter) && be_virtfn(adapter)))
+ be_cmd_pmac_add(adapter, mac, adapter->if_handle,
+ &adapter->pmac_id[0], 0);
return 0;
}
if (adapter->wol)
be_setup_wol(adapter, true);
+ be_intr_set(adapter, false);
cancel_delayed_work_sync(&adapter->func_recovery_work);
netif_device_detach(netdev);
if (status)
return status;
+ be_intr_set(adapter, true);
/* tell fw we're ready to fire cmds */
status = be_cmd_fw_init(adapter);
if (status)
#define E1000_MAX_INTR 10
+/*
+ * Count for polling __E1000_RESET condition every 10-20msec.
+ */
+#define E1000_CHECK_RESET_COUNT 50
+
/* TX/RX descriptor defines */
#define E1000_DEFAULT_TXD 256
#define E1000_MAX_TXD 256
struct delayed_work watchdog_task;
struct delayed_work fifo_stall_task;
struct delayed_work phy_info_task;
-
- struct mutex mutex;
};
enum e1000_state_t {
{
set_bit(__E1000_DOWN, &adapter->flags);
- /* Only kill reset task if adapter is not resetting */
- if (!test_bit(__E1000_RESETTING, &adapter->flags))
- cancel_work_sync(&adapter->reset_task);
-
cancel_delayed_work_sync(&adapter->watchdog_task);
+
+ /*
+ * Since the watchdog task can reschedule other tasks, we should cancel
+ * it first, otherwise we can run into the situation when a work is
+ * still running after the adapter has been turned down.
+ */
+
cancel_delayed_work_sync(&adapter->phy_info_task);
cancel_delayed_work_sync(&adapter->fifo_stall_task);
+
+ /* Only kill reset task if adapter is not resetting */
+ if (!test_bit(__E1000_RESETTING, &adapter->flags))
+ cancel_work_sync(&adapter->reset_task);
}
void e1000_down(struct e1000_adapter *adapter)
e1000_clean_all_rx_rings(adapter);
}
-static void e1000_reinit_safe(struct e1000_adapter *adapter)
-{
- while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
- msleep(1);
- mutex_lock(&adapter->mutex);
- e1000_down(adapter);
- e1000_up(adapter);
- mutex_unlock(&adapter->mutex);
- clear_bit(__E1000_RESETTING, &adapter->flags);
-}
-
void e1000_reinit_locked(struct e1000_adapter *adapter)
{
- /* if rtnl_lock is not held the call path is bogus */
- ASSERT_RTNL();
WARN_ON(in_interrupt());
while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
msleep(1);
e1000_irq_disable(adapter);
spin_lock_init(&adapter->stats_lock);
- mutex_init(&adapter->mutex);
set_bit(__E1000_DOWN, &adapter->flags);
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ int count = E1000_CHECK_RESET_COUNT;
+
+ while (test_bit(__E1000_RESETTING, &adapter->flags) && count--)
+ usleep_range(10000, 20000);
WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
e1000_down(adapter);
struct e1000_adapter *adapter = container_of(work,
struct e1000_adapter,
phy_info_task.work);
- if (test_bit(__E1000_DOWN, &adapter->flags))
- return;
- mutex_lock(&adapter->mutex);
+
e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
- mutex_unlock(&adapter->mutex);
}
/**
struct net_device *netdev = adapter->netdev;
u32 tctl;
- if (test_bit(__E1000_DOWN, &adapter->flags))
- return;
- mutex_lock(&adapter->mutex);
if (atomic_read(&adapter->tx_fifo_stall)) {
if ((er32(TDT) == er32(TDH)) &&
(er32(TDFT) == er32(TDFH)) &&
schedule_delayed_work(&adapter->fifo_stall_task, 1);
}
}
- mutex_unlock(&adapter->mutex);
}
bool e1000_has_link(struct e1000_adapter *adapter)
struct e1000_tx_ring *txdr = adapter->tx_ring;
u32 link, tctl;
- if (test_bit(__E1000_DOWN, &adapter->flags))
- return;
-
- mutex_lock(&adapter->mutex);
link = e1000_has_link(adapter);
if ((netif_carrier_ok(netdev)) && link)
goto link_up;
adapter->tx_timeout_count++;
schedule_work(&adapter->reset_task);
/* exit immediately since reset is imminent */
- goto unlock;
+ return;
}
}
/* Reschedule the task */
if (!test_bit(__E1000_DOWN, &adapter->flags))
schedule_delayed_work(&adapter->watchdog_task, 2 * HZ);
-
-unlock:
- mutex_unlock(&adapter->mutex);
}
enum latency_range {
struct e1000_adapter *adapter =
container_of(work, struct e1000_adapter, reset_task);
- if (test_bit(__E1000_DOWN, &adapter->flags))
- return;
e_err(drv, "Reset adapter\n");
- e1000_reinit_safe(adapter);
+ e1000_reinit_locked(adapter);
}
/**
netif_device_detach(netdev);
if (netif_running(netdev)) {
+ int count = E1000_CHECK_RESET_COUNT;
+
+ while (test_bit(__E1000_RESETTING, &adapter->flags) && count--)
+ usleep_range(10000, 20000);
+
WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
e1000_down(adapter);
}
{
struct igb_adapter *adapter = netdev_priv(netdev);
- wol->supported = WAKE_UCAST | WAKE_MCAST |
- WAKE_BCAST | WAKE_MAGIC |
- WAKE_PHY;
wol->wolopts = 0;
if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED))
return;
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC |
+ WAKE_PHY;
+
/* apply any specific unsupported masks here */
switch (adapter->hw.device_id) {
default:
rx_ring->l2_accel_priv = NULL;
}
-int ixgbe_fwd_ring_down(struct net_device *vdev,
- struct ixgbe_fwd_adapter *accel)
+static int ixgbe_fwd_ring_down(struct net_device *vdev,
+ struct ixgbe_fwd_adapter *accel)
{
struct ixgbe_adapter *adapter = accel->real_adapter;
unsigned int rxbase = accel->rx_base_queue;
NETIF_F_TSO |
NETIF_F_TSO6 |
NETIF_F_RXHASH |
- NETIF_F_RXCSUM |
- NETIF_F_HW_L2FW_DOFFLOAD;
+ NETIF_F_RXCSUM;
- netdev->hw_features = netdev->features;
+ netdev->hw_features = netdev->features | NETIF_F_HW_L2FW_DOFFLOAD;
switch (adapter->hw.mac.type) {
case ixgbe_mac_82599EB:
static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw);
static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
+static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw);
/**
* ixgbe_identify_phy_generic - Get physical layer module
*
* Searches for and identifies the QSFP module and assigns appropriate PHY type
**/
-s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
+static s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
{
struct ixgbe_adapter *adapter = hw->back;
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw);
s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
-s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw);
s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
u16 *list_offset,
u16 *data_offset);
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
- struct mlx4_en_tx_ring *tx_ring;
int i, carrier_ok;
memset(buf, 0, sizeof(u64) * MLX4_EN_NUM_SELF_TEST);
carrier_ok = netif_carrier_ok(dev);
netif_carrier_off(dev);
-retry_tx:
/* Wait until all tx queues are empty.
* there should not be any additional incoming traffic
* since we turned the carrier off */
msleep(200);
- for (i = 0; i < priv->tx_ring_num && carrier_ok; i++) {
- tx_ring = priv->tx_ring[i];
- if (tx_ring->prod != (tx_ring->cons + tx_ring->last_nr_txbb))
- goto retry_tx;
- }
if (priv->mdev->dev->caps.flags &
MLX4_DEV_CAP_FLAG_UC_LOOPBACK) {
le32_to_cpu(txd->opts1) & 0xffff,
PCI_DMA_TODEVICE);
- bytes_compl += skb->len;
- pkts_compl++;
-
if (status & LastFrag) {
if (status & (TxError | TxFIFOUnder)) {
netif_dbg(cp, tx_err, cp->dev,
netif_dbg(cp, tx_done, cp->dev,
"tx done, slot %d\n", tx_tail);
}
+ bytes_compl += skb->len;
+ pkts_compl++;
dev_kfree_skb_irq(skb);
}
rtl_writephy(tp, 0x14, 0x9065);
rtl_writephy(tp, 0x14, 0x1065);
+ /* Check ALDPS bit, disable it if enabled */
+ rtl_writephy(tp, 0x1f, 0x0a43);
+ if (rtl_readphy(tp, 0x10) & 0x0004)
+ rtl_w1w0_phy(tp, 0x10, 0x0000, 0x0004);
+
rtl_writephy(tp, 0x1f, 0x0000);
}
unsigned long last_update;
struct device *device;
struct efx_mcdi_mon_attribute *attrs;
+ struct attribute_group group;
+ const struct attribute_group *groups[2];
unsigned int n_attrs;
};
return rc;
}
-static ssize_t efx_mcdi_mon_show_name(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return sprintf(buf, "%s\n", KBUILD_MODNAME);
-}
-
static int efx_mcdi_mon_get_entry(struct device *dev, unsigned int index,
efx_dword_t *entry)
{
- struct efx_nic *efx = dev_get_drvdata(dev);
+ struct efx_nic *efx = dev_get_drvdata(dev->parent);
struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
int rc;
efx_mcdi_sensor_type[mon_attr->type].label);
}
-static int
+static void
efx_mcdi_mon_add_attr(struct efx_nic *efx, const char *name,
ssize_t (*reader)(struct device *,
struct device_attribute *, char *),
{
struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
struct efx_mcdi_mon_attribute *attr = &hwmon->attrs[hwmon->n_attrs];
- int rc;
strlcpy(attr->name, name, sizeof(attr->name));
attr->index = index;
attr->dev_attr.attr.name = attr->name;
attr->dev_attr.attr.mode = S_IRUGO;
attr->dev_attr.show = reader;
- rc = device_create_file(&efx->pci_dev->dev, &attr->dev_attr);
- if (rc == 0)
- ++hwmon->n_attrs;
- return rc;
+ hwmon->group.attrs[hwmon->n_attrs++] = &attr->dev_attr.attr;
}
int efx_mcdi_mon_probe(struct efx_nic *efx)
efx_mcdi_mon_update(efx);
/* Allocate space for the maximum possible number of
- * attributes for this set of sensors: name of the driver plus
+ * attributes for this set of sensors:
* value, min, max, crit, alarm and label for each sensor.
*/
- n_attrs = 1 + 6 * n_sensors;
+ n_attrs = 6 * n_sensors;
hwmon->attrs = kcalloc(n_attrs, sizeof(*hwmon->attrs), GFP_KERNEL);
if (!hwmon->attrs) {
rc = -ENOMEM;
goto fail;
}
-
- hwmon->device = hwmon_device_register(&efx->pci_dev->dev);
- if (IS_ERR(hwmon->device)) {
- rc = PTR_ERR(hwmon->device);
+ hwmon->group.attrs = kcalloc(n_attrs + 1, sizeof(struct attribute *),
+ GFP_KERNEL);
+ if (!hwmon->group.attrs) {
+ rc = -ENOMEM;
goto fail;
}
- rc = efx_mcdi_mon_add_attr(efx, "name", efx_mcdi_mon_show_name, 0, 0, 0);
- if (rc)
- goto fail;
-
for (i = 0, j = -1, type = -1; ; i++) {
enum efx_hwmon_type hwmon_type;
const char *hwmon_prefix;
page = type / 32;
j = -1;
if (page == n_pages)
- return 0;
+ goto hwmon_register;
MCDI_SET_DWORD(inbuf, SENSOR_INFO_EXT_IN_PAGE,
page);
if (min1 != max1) {
snprintf(name, sizeof(name), "%s%u_input",
hwmon_prefix, hwmon_index);
- rc = efx_mcdi_mon_add_attr(
+ efx_mcdi_mon_add_attr(
efx, name, efx_mcdi_mon_show_value, i, type, 0);
- if (rc)
- goto fail;
if (hwmon_type != EFX_HWMON_POWER) {
snprintf(name, sizeof(name), "%s%u_min",
hwmon_prefix, hwmon_index);
- rc = efx_mcdi_mon_add_attr(
+ efx_mcdi_mon_add_attr(
efx, name, efx_mcdi_mon_show_limit,
i, type, min1);
- if (rc)
- goto fail;
}
snprintf(name, sizeof(name), "%s%u_max",
hwmon_prefix, hwmon_index);
- rc = efx_mcdi_mon_add_attr(
+ efx_mcdi_mon_add_attr(
efx, name, efx_mcdi_mon_show_limit,
i, type, max1);
- if (rc)
- goto fail;
if (min2 != max2) {
/* Assume max2 is critical value.
*/
snprintf(name, sizeof(name), "%s%u_crit",
hwmon_prefix, hwmon_index);
- rc = efx_mcdi_mon_add_attr(
+ efx_mcdi_mon_add_attr(
efx, name, efx_mcdi_mon_show_limit,
i, type, max2);
- if (rc)
- goto fail;
}
}
snprintf(name, sizeof(name), "%s%u_alarm",
hwmon_prefix, hwmon_index);
- rc = efx_mcdi_mon_add_attr(
+ efx_mcdi_mon_add_attr(
efx, name, efx_mcdi_mon_show_alarm, i, type, 0);
- if (rc)
- goto fail;
if (type < ARRAY_SIZE(efx_mcdi_sensor_type) &&
efx_mcdi_sensor_type[type].label) {
snprintf(name, sizeof(name), "%s%u_label",
hwmon_prefix, hwmon_index);
- rc = efx_mcdi_mon_add_attr(
+ efx_mcdi_mon_add_attr(
efx, name, efx_mcdi_mon_show_label, i, type, 0);
- if (rc)
- goto fail;
}
}
+hwmon_register:
+ hwmon->groups[0] = &hwmon->group;
+ hwmon->device = hwmon_device_register_with_groups(&efx->pci_dev->dev,
+ KBUILD_MODNAME, NULL,
+ hwmon->groups);
+ if (IS_ERR(hwmon->device)) {
+ rc = PTR_ERR(hwmon->device);
+ goto fail;
+ }
+
+ return 0;
+
fail:
efx_mcdi_mon_remove(efx);
return rc;
void efx_mcdi_mon_remove(struct efx_nic *efx)
{
struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx);
- unsigned int i;
- for (i = 0; i < hwmon->n_attrs; i++)
- device_remove_file(&efx->pci_dev->dev,
- &hwmon->attrs[i].dev_attr);
- kfree(hwmon->attrs);
if (hwmon->device)
hwmon_device_unregister(hwmon->device);
+ kfree(hwmon->attrs);
+ kfree(hwmon->group.attrs);
efx_nic_free_buffer(efx, &hwmon->dma_buf);
}
defined(CONFIG_MACH_LITTLETON) ||\
defined(CONFIG_MACH_ZYLONITE2) ||\
defined(CONFIG_ARCH_VIPER) ||\
- defined(CONFIG_MACH_STARGATE2)
+ defined(CONFIG_MACH_STARGATE2) ||\
+ defined(CONFIG_ARCH_VERSATILE)
#include <asm/mach-types.h>
#define SMC_outl(v, a, r) writel(v, (a) + (r))
#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
+#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
+#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
#define SMC_IRQ_FLAGS (-1) /* from resource */
/* We actually can't write halfwords properly if not word aligned */
#define RPC_LSA_DEFAULT RPC_LED_TX_RX
#define RPC_LSB_DEFAULT RPC_LED_100_10
-#elif defined(CONFIG_ARCH_VERSATILE)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 1
-#define SMC_NOWAIT 1
-
-#define SMC_inb(a, r) readb((a) + (r))
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outb(v, a, r) writeb(v, (a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-#define SMC_IRQ_FLAGS (-1) /* from resource */
-
#elif defined(CONFIG_MN10300)
/*
unsigned int rx_done;
unsigned long flags;
- spin_lock_irqsave(&vptr->lock, flags);
/*
* Do rx and tx twice for performance (taken from the VIA
* out-of-tree driver).
*/
- rx_done = velocity_rx_srv(vptr, budget / 2);
- velocity_tx_srv(vptr);
- rx_done += velocity_rx_srv(vptr, budget - rx_done);
+ rx_done = velocity_rx_srv(vptr, budget);
+ spin_lock_irqsave(&vptr->lock, flags);
velocity_tx_srv(vptr);
-
/* If budget not fully consumed, exit the polling mode */
if (rx_done < budget) {
napi_complete(napi);
if (ret < 0)
goto out_free_tmp_vptr_1;
+ napi_disable(&vptr->napi);
+
spin_lock_irqsave(&vptr->lock, flags);
netif_stop_queue(dev);
velocity_give_many_rx_descs(vptr);
+ napi_enable(&vptr->napi);
+
mac_enable_int(vptr->mac_regs);
netif_start_queue(dev);
rcu_read_lock();
vlan = rcu_dereference(q->vlan);
if (vlan)
- vlan->dev->stats.tx_dropped++;
+ this_cpu_inc(vlan->pcpu_stats->tx_dropped);
rcu_read_unlock();
return err;
const struct sk_buff *skb,
const struct iovec *iv, int len)
{
- struct macvlan_dev *vlan;
int ret;
int vnet_hdr_len = 0;
int vlan_offset = 0;
copied += len;
done:
- rcu_read_lock();
- vlan = rcu_dereference(q->vlan);
- if (vlan) {
- preempt_disable();
- macvlan_count_rx(vlan, copied - vnet_hdr_len, ret == 0, 0);
- preempt_enable();
- }
- rcu_read_unlock();
-
return ret ? ret : copied;
}
#define PHY_ID_VSC8234 0x000fc620
#define PHY_ID_VSC8244 0x000fc6c0
+#define PHY_ID_VSC8514 0x00070670
#define PHY_ID_VSC8574 0x000704a0
#define PHY_ID_VSC8662 0x00070660
#define PHY_ID_VSC8221 0x000fc550
err = phy_write(phydev, MII_VSC8244_IMASK,
(phydev->drv->phy_id == PHY_ID_VSC8234 ||
phydev->drv->phy_id == PHY_ID_VSC8244 ||
+ phydev->drv->phy_id == PHY_ID_VSC8514 ||
phydev->drv->phy_id == PHY_ID_VSC8574) ?
MII_VSC8244_IMASK_MASK :
MII_VSC8221_IMASK_MASK);
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
.driver = { .owner = THIS_MODULE,},
+}, {
+ .phy_id = PHY_ID_VSC8514,
+ .name = "Vitesse VSC8514",
+ .phy_id_mask = 0x000ffff0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
}, {
.phy_id = PHY_ID_VSC8574,
.name = "Vitesse VSC8574",
static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
{ PHY_ID_VSC8234, 0x000ffff0 },
{ PHY_ID_VSC8244, 0x000fffc0 },
+ { PHY_ID_VSC8514, 0x000ffff0 },
{ PHY_ID_VSC8574, 0x000ffff0 },
{ PHY_ID_VSC8662, 0x000ffff0 },
{ PHY_ID_VSC8221, 0x000ffff0 },
return 0;
}
+static void __team_carrier_check(struct team *team);
+
static int team_user_linkup_option_set(struct team *team,
struct team_gsetter_ctx *ctx)
{
port->user.linkup = ctx->data.bool_val;
team_refresh_port_linkup(port);
+ __team_carrier_check(port->team);
return 0;
}
port->user.linkup_enabled = ctx->data.bool_val;
team_refresh_port_linkup(port);
+ __team_carrier_check(port->team);
return 0;
}
return skb;
}
-static int receive_mergeable(struct receive_queue *rq, struct sk_buff *head_skb)
+static struct sk_buff *receive_small(void *buf, unsigned int len)
{
- struct skb_vnet_hdr *hdr = skb_vnet_hdr(head_skb);
+ struct sk_buff * skb = buf;
+
+ len -= sizeof(struct virtio_net_hdr);
+ skb_trim(skb, len);
+
+ return skb;
+}
+
+static struct sk_buff *receive_big(struct net_device *dev,
+ struct receive_queue *rq,
+ void *buf,
+ unsigned int len)
+{
+ struct page *page = buf;
+ struct sk_buff *skb = page_to_skb(rq, page, 0, len, PAGE_SIZE);
+
+ if (unlikely(!skb))
+ goto err;
+
+ return skb;
+
+err:
+ dev->stats.rx_dropped++;
+ give_pages(rq, page);
+ return NULL;
+}
+
+static struct sk_buff *receive_mergeable(struct net_device *dev,
+ struct receive_queue *rq,
+ void *buf,
+ unsigned int len)
+{
+ struct skb_vnet_hdr *hdr = buf;
+ int num_buf = hdr->mhdr.num_buffers;
+ struct page *page = virt_to_head_page(buf);
+ int offset = buf - page_address(page);
+ struct sk_buff *head_skb = page_to_skb(rq, page, offset, len,
+ MERGE_BUFFER_LEN);
struct sk_buff *curr_skb = head_skb;
- char *buf;
- struct page *page;
- int num_buf, len, offset;
- num_buf = hdr->mhdr.num_buffers;
+ if (unlikely(!curr_skb))
+ goto err_skb;
+
while (--num_buf) {
- int num_skb_frags = skb_shinfo(curr_skb)->nr_frags;
+ int num_skb_frags;
+
buf = virtqueue_get_buf(rq->vq, &len);
if (unlikely(!buf)) {
- pr_debug("%s: rx error: %d buffers missing\n",
- head_skb->dev->name, hdr->mhdr.num_buffers);
- head_skb->dev->stats.rx_length_errors++;
- return -EINVAL;
+ pr_debug("%s: rx error: %d buffers out of %d missing\n",
+ dev->name, num_buf, hdr->mhdr.num_buffers);
+ dev->stats.rx_length_errors++;
+ goto err_buf;
}
if (unlikely(len > MERGE_BUFFER_LEN)) {
pr_debug("%s: rx error: merge buffer too long\n",
- head_skb->dev->name);
+ dev->name);
len = MERGE_BUFFER_LEN;
}
+
+ page = virt_to_head_page(buf);
+ --rq->num;
+
+ num_skb_frags = skb_shinfo(curr_skb)->nr_frags;
if (unlikely(num_skb_frags == MAX_SKB_FRAGS)) {
struct sk_buff *nskb = alloc_skb(0, GFP_ATOMIC);
- if (unlikely(!nskb)) {
- head_skb->dev->stats.rx_dropped++;
- return -ENOMEM;
- }
+
+ if (unlikely(!nskb))
+ goto err_skb;
if (curr_skb == head_skb)
skb_shinfo(curr_skb)->frag_list = nskb;
else
head_skb->len += len;
head_skb->truesize += MERGE_BUFFER_LEN;
}
- page = virt_to_head_page(buf);
- offset = buf - (char *)page_address(page);
+ offset = buf - page_address(page);
if (skb_can_coalesce(curr_skb, num_skb_frags, page, offset)) {
put_page(page);
skb_coalesce_rx_frag(curr_skb, num_skb_frags - 1,
skb_add_rx_frag(curr_skb, num_skb_frags, page,
offset, len, MERGE_BUFFER_LEN);
}
+ }
+
+ return head_skb;
+
+err_skb:
+ put_page(page);
+ while (--num_buf) {
+ buf = virtqueue_get_buf(rq->vq, &len);
+ if (unlikely(!buf)) {
+ pr_debug("%s: rx error: %d buffers missing\n",
+ dev->name, num_buf);
+ dev->stats.rx_length_errors++;
+ break;
+ }
+ page = virt_to_head_page(buf);
+ put_page(page);
--rq->num;
}
- return 0;
+err_buf:
+ dev->stats.rx_dropped++;
+ dev_kfree_skb(head_skb);
+ return NULL;
}
static void receive_buf(struct receive_queue *rq, void *buf, unsigned int len)
struct net_device *dev = vi->dev;
struct virtnet_stats *stats = this_cpu_ptr(vi->stats);
struct sk_buff *skb;
- struct page *page;
struct skb_vnet_hdr *hdr;
if (unlikely(len < sizeof(struct virtio_net_hdr) + ETH_HLEN)) {
return;
}
- if (!vi->mergeable_rx_bufs && !vi->big_packets) {
- skb = buf;
- len -= sizeof(struct virtio_net_hdr);
- skb_trim(skb, len);
- } else if (vi->mergeable_rx_bufs) {
- struct page *page = virt_to_head_page(buf);
- skb = page_to_skb(rq, page,
- (char *)buf - (char *)page_address(page),
- len, MERGE_BUFFER_LEN);
- if (unlikely(!skb)) {
- dev->stats.rx_dropped++;
- put_page(page);
- return;
- }
- if (receive_mergeable(rq, skb)) {
- dev_kfree_skb(skb);
- return;
- }
- } else {
- page = buf;
- skb = page_to_skb(rq, page, 0, len, PAGE_SIZE);
- if (unlikely(!skb)) {
- dev->stats.rx_dropped++;
- give_pages(rq, page);
- return;
- }
- }
+ if (vi->mergeable_rx_bufs)
+ skb = receive_mergeable(dev, rq, buf, len);
+ else if (vi->big_packets)
+ skb = receive_big(dev, rq, buf, len);
+ else
+ skb = receive_small(buf, len);
+
+ if (unlikely(!skb))
+ return;
hdr = skb_vnet_hdr(skb);
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_MAC,
VIRTIO_NET_CTRL_MAC_TABLE_SET,
sg, NULL))
- dev_warn(&dev->dev, "Failed to set MAC fitler table.\n");
+ dev_warn(&dev->dev, "Failed to set MAC filter table.\n");
kfree(buf);
}
#include <linux/udp.h>
#include <net/tcp.h>
+#include <net/ip6_checksum.h>
#include <xen/xen.h>
#include <xen/events.h>
ndev->event_cb = NULL;
}
+static void ntb_irq_work(unsigned long data)
+{
+ struct ntb_db_cb *db_cb = (struct ntb_db_cb *)data;
+ int rc;
+
+ rc = db_cb->callback(db_cb->data, db_cb->db_num);
+ if (rc)
+ tasklet_schedule(&db_cb->irq_work);
+ else {
+ struct ntb_device *ndev = db_cb->ndev;
+ unsigned long mask;
+
+ mask = readw(ndev->reg_ofs.ldb_mask);
+ clear_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
+ writew(mask, ndev->reg_ofs.ldb_mask);
+ }
+}
+
/**
* ntb_register_db_callback() - register a callback for doorbell interrupt
* @ndev: pointer to ntb_device instance
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx,
- void *data, void (*func)(void *data, int db_num))
+ void *data, int (*func)(void *data, int db_num))
{
unsigned long mask;
ndev->db_cb[idx].callback = func;
ndev->db_cb[idx].data = data;
+ ndev->db_cb[idx].ndev = ndev;
+
+ tasklet_init(&ndev->db_cb[idx].irq_work, ntb_irq_work,
+ (unsigned long) &ndev->db_cb[idx]);
/* unmask interrupt */
mask = readw(ndev->reg_ofs.ldb_mask);
set_bit(idx * ndev->bits_per_vector, &mask);
writew(mask, ndev->reg_ofs.ldb_mask);
+ tasklet_disable(&ndev->db_cb[idx].irq_work);
+
ndev->db_cb[idx].callback = NULL;
}
return -EINVAL;
ndev->limits.max_mw = SNB_ERRATA_MAX_MW;
+ ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
ndev->reg_ofs.spad_write = ndev->mw[1].vbase +
SNB_SPAD_OFFSET;
ndev->reg_ofs.rdb = ndev->mw[1].vbase +
*/
writeq(ndev->mw[1].bar_sz + 0x1000, ndev->reg_base +
SNB_PBAR4LMT_OFFSET);
+ /* HW errata on the Limit registers. They can only be
+ * written when the base register is 4GB aligned and
+ * < 32bit. This should already be the case based on the
+ * driver defaults, but write the Limit registers first
+ * just in case.
+ */
} else {
ndev->limits.max_mw = SNB_MAX_MW;
+
+ /* HW Errata on bit 14 of b2bdoorbell register. Writes
+ * will not be mirrored to the remote system. Shrink
+ * the number of bits by one, since bit 14 is the last
+ * bit.
+ */
+ ndev->limits.max_db_bits = SNB_MAX_DB_BITS - 1;
ndev->reg_ofs.spad_write = ndev->reg_base +
SNB_B2B_SPAD_OFFSET;
ndev->reg_ofs.rdb = ndev->reg_base +
* something silly
*/
writeq(0, ndev->reg_base + SNB_PBAR4LMT_OFFSET);
+ /* HW errata on the Limit registers. They can only be
+ * written when the base register is 4GB aligned and
+ * < 32bit. This should already be the case based on the
+ * driver defaults, but write the Limit registers first
+ * just in case.
+ */
}
/* The Xeon errata workaround requires setting SBAR Base
* have an equal amount.
*/
ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2;
+ ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
/* Note: The SDOORBELL is the cause of the errata. You REALLY
* don't want to touch it.
*/
* have an equal amount.
*/
ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS / 2;
+ ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
ndev->reg_ofs.rdb = ndev->reg_base + SNB_PDOORBELL_OFFSET;
ndev->reg_ofs.ldb = ndev->reg_base + SNB_SDOORBELL_OFFSET;
ndev->reg_ofs.ldb_mask = ndev->reg_base + SNB_SDBMSK_OFFSET;
ndev->reg_ofs.lnk_stat = ndev->reg_base + SNB_SLINK_STATUS_OFFSET;
ndev->reg_ofs.spci_cmd = ndev->reg_base + SNB_PCICMD_OFFSET;
- ndev->limits.max_db_bits = SNB_MAX_DB_BITS;
ndev->limits.msix_cnt = SNB_MSIX_CNT;
ndev->bits_per_vector = SNB_DB_BITS_PER_VEC;
{
struct ntb_db_cb *db_cb = data;
struct ntb_device *ndev = db_cb->ndev;
+ unsigned long mask;
dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq,
db_cb->db_num);
- if (db_cb->callback)
- db_cb->callback(db_cb->data, db_cb->db_num);
+ mask = readw(ndev->reg_ofs.ldb_mask);
+ set_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
+ writew(mask, ndev->reg_ofs.ldb_mask);
+
+ tasklet_schedule(&db_cb->irq_work);
/* No need to check for the specific HB irq, any interrupt means
* we're connected.
{
struct ntb_db_cb *db_cb = data;
struct ntb_device *ndev = db_cb->ndev;
+ unsigned long mask;
dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq,
db_cb->db_num);
- if (db_cb->callback)
- db_cb->callback(db_cb->data, db_cb->db_num);
+ mask = readw(ndev->reg_ofs.ldb_mask);
+ set_bit(db_cb->db_num * ndev->bits_per_vector, &mask);
+ writew(mask, ndev->reg_ofs.ldb_mask);
+
+ tasklet_schedule(&db_cb->irq_work);
/* On Sandybridge, there are 16 bits in the interrupt register
* but only 4 vectors. So, 5 bits are assigned to the first 3
dev_err(&ndev->pdev->dev, "Error determining link status\n");
/* bit 15 is always the link bit */
- writew(1 << ndev->limits.max_db_bits, ndev->reg_ofs.ldb);
+ writew(1 << SNB_LINK_DB, ndev->reg_ofs.ldb);
return IRQ_HANDLED;
}
"Only %d MSI-X vectors. Limiting the number of queues to that number.\n",
rc);
msix_entries = rc;
+
+ rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
+ if (rc)
+ goto err1;
}
for (i = 0; i < msix_entries; i++) {
*/
if (ndev->hw_type == BWD_HW)
writeq(~0, ndev->reg_ofs.ldb_mask);
- else
- writew(~(1 << ndev->limits.max_db_bits),
- ndev->reg_ofs.ldb_mask);
+ else {
+ u16 var = 1 << SNB_LINK_DB;
+ writew(~var, ndev->reg_ofs.ldb_mask);
+ }
rc = ntb_setup_msix(ndev);
if (!rc)
}
}
+static void ntb_hw_link_up(struct ntb_device *ndev)
+{
+ if (ndev->conn_type == NTB_CONN_TRANSPARENT)
+ ntb_link_event(ndev, NTB_LINK_UP);
+ else {
+ u32 ntb_cntl;
+
+ /* Let's bring the NTB link up */
+ ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
+ ntb_cntl &= ~(NTB_CNTL_LINK_DISABLE | NTB_CNTL_CFG_LOCK);
+ ntb_cntl |= NTB_CNTL_P2S_BAR23_SNOOP | NTB_CNTL_S2P_BAR23_SNOOP;
+ ntb_cntl |= NTB_CNTL_P2S_BAR45_SNOOP | NTB_CNTL_S2P_BAR45_SNOOP;
+ writel(ntb_cntl, ndev->reg_ofs.lnk_cntl);
+ }
+}
+
+static void ntb_hw_link_down(struct ntb_device *ndev)
+{
+ u32 ntb_cntl;
+
+ if (ndev->conn_type == NTB_CONN_TRANSPARENT) {
+ ntb_link_event(ndev, NTB_LINK_DOWN);
+ return;
+ }
+
+ /* Bring NTB link down */
+ ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
+ ntb_cntl &= ~(NTB_CNTL_P2S_BAR23_SNOOP | NTB_CNTL_S2P_BAR23_SNOOP);
+ ntb_cntl &= ~(NTB_CNTL_P2S_BAR45_SNOOP | NTB_CNTL_S2P_BAR45_SNOOP);
+ ntb_cntl |= NTB_CNTL_LINK_DISABLE | NTB_CNTL_CFG_LOCK;
+ writel(ntb_cntl, ndev->reg_ofs.lnk_cntl);
+}
+
static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct ntb_device *ndev;
if (rc)
goto err6;
- /* Let's bring the NTB link up */
- writel(NTB_CNTL_BAR23_SNOOP | NTB_CNTL_BAR45_SNOOP,
- ndev->reg_ofs.lnk_cntl);
+ ntb_hw_link_up(ndev);
return 0;
{
struct ntb_device *ndev = pci_get_drvdata(pdev);
int i;
- u32 ntb_cntl;
- /* Bring NTB link down */
- ntb_cntl = readl(ndev->reg_ofs.lnk_cntl);
- ntb_cntl |= NTB_CNTL_LINK_DISABLE;
- writel(ntb_cntl, ndev->reg_ofs.lnk_cntl);
+ ntb_hw_link_down(ndev);
ntb_transport_free(ndev->ntb_transport);
};
struct ntb_db_cb {
- void (*callback) (void *data, int db_num);
+ int (*callback)(void *data, int db_num);
unsigned int db_num;
void *data;
struct ntb_device *ndev;
+ struct tasklet_struct irq_work;
};
struct ntb_device {
void ntb_unregister_transport(struct ntb_device *ndev);
void ntb_set_mw_addr(struct ntb_device *ndev, unsigned int mw, u64 addr);
int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx,
- void *data, void (*db_cb_func) (void *data,
- int db_num));
+ void *data, int (*db_cb_func)(void *data,
+ int db_num));
void ntb_unregister_db_callback(struct ntb_device *ndev, unsigned int idx);
int ntb_register_event_callback(struct ntb_device *ndev,
void (*event_cb_func) (void *handle,
#define SNB_MAX_COMPAT_SPADS 16
/* Reserve the uppermost bit for link interrupt */
#define SNB_MAX_DB_BITS 15
+#define SNB_LINK_DB 15
#define SNB_DB_BITS_PER_VEC 5
#define SNB_MAX_MW 2
#define SNB_ERRATA_MAX_MW 1
#define SNB_SBAR2XLAT_OFFSET 0x0030
#define SNB_SBAR4XLAT_OFFSET 0x0038
#define SNB_SBAR0BASE_OFFSET 0x0040
-#define SNB_SBAR0BASE_OFFSET 0x0040
-#define SNB_SBAR2BASE_OFFSET 0x0048
-#define SNB_SBAR4BASE_OFFSET 0x0050
#define SNB_SBAR2BASE_OFFSET 0x0048
#define SNB_SBAR4BASE_OFFSET 0x0050
#define SNB_NTBCNTL_OFFSET 0x0058
#define BWD_LTSSMSTATEJMP_FORCEDETECT (1 << 2)
#define BWD_IBIST_ERR_OFLOW 0x7FFF7FFF
-#define NTB_CNTL_CFG_LOCK (1 << 0)
-#define NTB_CNTL_LINK_DISABLE (1 << 1)
-#define NTB_CNTL_BAR23_SNOOP (1 << 2)
-#define NTB_CNTL_BAR45_SNOOP (1 << 6)
-#define BWD_CNTL_LINK_DOWN (1 << 16)
+#define NTB_CNTL_CFG_LOCK (1 << 0)
+#define NTB_CNTL_LINK_DISABLE (1 << 1)
+#define NTB_CNTL_S2P_BAR23_SNOOP (1 << 2)
+#define NTB_CNTL_P2S_BAR23_SNOOP (1 << 4)
+#define NTB_CNTL_S2P_BAR45_SNOOP (1 << 6)
+#define NTB_CNTL_P2S_BAR45_SNOOP (1 << 8)
+#define BWD_CNTL_LINK_DOWN (1 << 16)
#define NTB_PPD_OFFSET 0x00D4
#define SNB_PPD_CONN_TYPE 0x0003
void (*rx_handler) (struct ntb_transport_qp *qp, void *qp_data,
void *data, int len);
- struct tasklet_struct rx_work;
struct list_head rx_pend_q;
struct list_head rx_free_q;
spinlock_t ntb_rx_pend_q_lock;
return 0;
}
-static void ntb_qp_link_cleanup(struct work_struct *work)
+static void ntb_qp_link_cleanup(struct ntb_transport_qp *qp)
{
- struct ntb_transport_qp *qp = container_of(work,
- struct ntb_transport_qp,
- link_cleanup);
struct ntb_transport *nt = qp->transport;
struct pci_dev *pdev = ntb_query_pdev(nt->ndev);
dev_info(&pdev->dev, "qp %d: Link Down\n", qp->qp_num);
qp->qp_link = NTB_LINK_DOWN;
+}
+
+static void ntb_qp_link_cleanup_work(struct work_struct *work)
+{
+ struct ntb_transport_qp *qp = container_of(work,
+ struct ntb_transport_qp,
+ link_cleanup);
+ struct ntb_transport *nt = qp->transport;
+
+ ntb_qp_link_cleanup(qp);
if (nt->transport_link == NTB_LINK_UP)
schedule_delayed_work(&qp->link_work,
schedule_work(&qp->link_cleanup);
}
-static void ntb_transport_link_cleanup(struct work_struct *work)
+static void ntb_transport_link_cleanup(struct ntb_transport *nt)
{
- struct ntb_transport *nt = container_of(work, struct ntb_transport,
- link_cleanup);
int i;
+ /* Pass along the info to any clients */
+ for (i = 0; i < nt->max_qps; i++)
+ if (!test_bit(i, &nt->qp_bitmap))
+ ntb_qp_link_cleanup(&nt->qps[i]);
+
if (nt->transport_link == NTB_LINK_DOWN)
cancel_delayed_work_sync(&nt->link_work);
else
nt->transport_link = NTB_LINK_DOWN;
- /* Pass along the info to any clients */
- for (i = 0; i < nt->max_qps; i++)
- if (!test_bit(i, &nt->qp_bitmap))
- ntb_qp_link_down(&nt->qps[i]);
-
/* The scratchpad registers keep the values if the remote side
* goes down, blast them now to give them a sane value the next
* time they are accessed
ntb_write_local_spad(nt->ndev, i, 0);
}
+static void ntb_transport_link_cleanup_work(struct work_struct *work)
+{
+ struct ntb_transport *nt = container_of(work, struct ntb_transport,
+ link_cleanup);
+
+ ntb_transport_link_cleanup(nt);
+}
+
static void ntb_transport_event_callback(void *data, enum ntb_hw_event event)
{
struct ntb_transport *nt = data;
}
INIT_DELAYED_WORK(&qp->link_work, ntb_qp_link_work);
- INIT_WORK(&qp->link_cleanup, ntb_qp_link_cleanup);
+ INIT_WORK(&qp->link_cleanup, ntb_qp_link_cleanup_work);
spin_lock_init(&qp->ntb_rx_pend_q_lock);
spin_lock_init(&qp->ntb_rx_free_q_lock);
}
INIT_DELAYED_WORK(&nt->link_work, ntb_transport_link_work);
- INIT_WORK(&nt->link_cleanup, ntb_transport_link_cleanup);
+ INIT_WORK(&nt->link_cleanup, ntb_transport_link_cleanup_work);
rc = ntb_register_event_callback(nt->ndev,
ntb_transport_event_callback);
struct ntb_device *ndev = nt->ndev;
int i;
- nt->transport_link = NTB_LINK_DOWN;
+ ntb_transport_link_cleanup(nt);
/* verify that all the qp's are freed */
for (i = 0; i < nt->max_qps; i++) {
goto out;
}
-static void ntb_transport_rx(unsigned long data)
+static int ntb_transport_rxc_db(void *data, int db_num)
{
- struct ntb_transport_qp *qp = (struct ntb_transport_qp *)data;
+ struct ntb_transport_qp *qp = data;
int rc, i;
+ dev_dbg(&ntb_query_pdev(qp->ndev)->dev, "%s: doorbell %d received\n",
+ __func__, db_num);
+
/* Limit the number of packets processed in a single interrupt to
* provide fairness to others
*/
if (qp->dma_chan)
dma_async_issue_pending(qp->dma_chan);
-}
-
-static void ntb_transport_rxc_db(void *data, int db_num)
-{
- struct ntb_transport_qp *qp = data;
-
- dev_dbg(&ntb_query_pdev(qp->ndev)->dev, "%s: doorbell %d received\n",
- __func__, db_num);
- tasklet_schedule(&qp->rx_work);
+ return i;
}
static void ntb_tx_copy_callback(void *data)
qp->tx_handler = handlers->tx_handler;
qp->event_handler = handlers->event_handler;
+ dmaengine_get();
qp->dma_chan = dma_find_channel(DMA_MEMCPY);
- if (!qp->dma_chan)
+ if (!qp->dma_chan) {
+ dmaengine_put();
dev_info(&pdev->dev, "Unable to allocate DMA channel, using CPU instead\n");
- else
- dmaengine_get();
+ }
for (i = 0; i < NTB_QP_DEF_NUM_ENTRIES; i++) {
entry = kzalloc(sizeof(struct ntb_queue_entry), GFP_ATOMIC);
&qp->tx_free_q);
}
- tasklet_init(&qp->rx_work, ntb_transport_rx, (unsigned long) qp);
-
rc = ntb_register_db_callback(qp->ndev, free_queue, qp,
ntb_transport_rxc_db);
if (rc)
- goto err3;
+ goto err2;
dev_info(&pdev->dev, "NTB Transport QP %d created\n", qp->qp_num);
return qp;
-err3:
- tasklet_disable(&qp->rx_work);
err2:
while ((entry = ntb_list_rm(&qp->ntb_tx_free_q_lock, &qp->tx_free_q)))
kfree(entry);
err1:
while ((entry = ntb_list_rm(&qp->ntb_rx_free_q_lock, &qp->rx_free_q)))
kfree(entry);
+ if (qp->dma_chan)
+ dmaengine_put();
set_bit(free_queue, &nt->qp_bitmap);
err:
return NULL;
}
ntb_unregister_db_callback(qp->ndev, qp->qp_num);
- tasklet_disable(&qp->rx_work);
cancel_delayed_work_sync(&qp->link_work);
*
* Init/reset quirks for USB host controllers should be in the
* USB quirks file, where their drivers can access reuse it.
- *
- * The bridge optimization stuff has been removed. If you really
- * have a silly BIOS which is unable to set your host bridge right,
- * use the PowerTweak utility (see http://powertweak.sourceforge.net).
*/
#include <linux/types.h>
ret = abx500_gpio_set_bits(chip,
AB8500_GPIO_ALTFUN_REG,
af.alt_bit1,
- !!(af.alta_val && BIT(0)));
+ !!(af.alta_val & BIT(0)));
if (ret < 0)
goto out;
goto out;
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
- af.alt_bit1, !!(af.altb_val && BIT(0)));
+ af.alt_bit1, !!(af.altb_val & BIT(0)));
if (ret < 0)
goto out;
goto out;
ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
- af.alt_bit2, !!(af.altc_val && BIT(1)));
+ af.alt_bit2, !!(af.altc_val & BIT(1)));
break;
default:
-#ifndef PINCTRL_PINCTRL_ABx5O0_H
+#ifndef PINCTRL_PINCTRL_ABx500_H
#define PINCTRL_PINCTRL_ABx500_H
/* Package definitions */
data |= (3 << bit);
break;
default:
+ spin_unlock_irqrestore(&bank->slock, flags);
dev_err(info->dev, "unsupported pull setting %d\n",
pull);
return -EINVAL;
if (ctrl->type == RK3188) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
info->reg_pull = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(info->reg_base))
- return PTR_ERR(info->reg_base);
+ if (IS_ERR(info->reg_pull))
+ return PTR_ERR(info->reg_pull);
}
ret = rockchip_gpiolib_register(pdev, info);
const struct r8a7740_portcr_group *group =
&r8a7740_portcr_offsets[i];
- if (i <= group->end_pin)
+ if (pin <= group->end_pin)
return pfc->window->virt + group->offset + pin;
}
const struct sh7372_portcr_group *group =
&sh7372_portcr_offsets[i];
- if (i <= group->end_pin)
+ if (pin <= group->end_pin)
return pfc->window->virt + group->offset + pin;
}
source "drivers/platform/goldfish/Kconfig"
endif
+source "drivers/platform/chrome/Kconfig"
obj-$(CONFIG_X86) += x86/
obj-$(CONFIG_OLPC) += olpc/
obj-$(CONFIG_GOLDFISH) += goldfish/
+obj-$(CONFIG_CHROME_PLATFORMS) += chrome/
--- /dev/null
+#
+# Platform support for Chrome OS hardware (Chromebooks and Chromeboxes)
+#
+
+menuconfig CHROME_PLATFORMS
+ bool "Platform support for Chrome hardware"
+ depends on X86
+ ---help---
+ Say Y here to get to see options for platform support for
+ various Chromebooks and Chromeboxes. This option alone does
+ not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and disabled.
+
+if CHROME_PLATFORMS
+
+config CHROMEOS_LAPTOP
+ tristate "Chrome OS Laptop"
+ depends on I2C
+ depends on DMI
+ ---help---
+ This driver instantiates i2c and smbus devices such as
+ light sensors and touchpads.
+
+ If you have a supported Chromebook, choose Y or M here.
+ The module will be called chromeos_laptop.
+
+endif # CHROMEOS_PLATFORMS
--- /dev/null
+
+obj-$(CONFIG_CHROMEOS_LAPTOP) += chromeos_laptop.o
--- /dev/null
+/*
+ * chromeos_laptop.c - Driver to instantiate Chromebook i2c/smbus devices.
+ *
+ * Author : Benson Leung <bleung@chromium.org>
+ *
+ * Copyright (C) 2012 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/atmel_mxt_ts.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#define ATMEL_TP_I2C_ADDR 0x4b
+#define ATMEL_TP_I2C_BL_ADDR 0x25
+#define ATMEL_TS_I2C_ADDR 0x4a
+#define ATMEL_TS_I2C_BL_ADDR 0x26
+#define CYAPA_TP_I2C_ADDR 0x67
+#define ISL_ALS_I2C_ADDR 0x44
+#define TAOS_ALS_I2C_ADDR 0x29
+
+static struct i2c_client *als;
+static struct i2c_client *tp;
+static struct i2c_client *ts;
+
+const char *i2c_adapter_names[] = {
+ "SMBus I801 adapter",
+ "i915 gmbus vga",
+ "i915 gmbus panel",
+};
+
+/* Keep this enum consistent with i2c_adapter_names */
+enum i2c_adapter_type {
+ I2C_ADAPTER_SMBUS = 0,
+ I2C_ADAPTER_VGADDC,
+ I2C_ADAPTER_PANEL,
+};
+
+static struct i2c_board_info __initdata cyapa_device = {
+ I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR),
+ .flags = I2C_CLIENT_WAKE,
+};
+
+static struct i2c_board_info __initdata isl_als_device = {
+ I2C_BOARD_INFO("isl29018", ISL_ALS_I2C_ADDR),
+};
+
+static struct i2c_board_info __initdata tsl2583_als_device = {
+ I2C_BOARD_INFO("tsl2583", TAOS_ALS_I2C_ADDR),
+};
+
+static struct i2c_board_info __initdata tsl2563_als_device = {
+ I2C_BOARD_INFO("tsl2563", TAOS_ALS_I2C_ADDR),
+};
+
+static struct mxt_platform_data atmel_224s_tp_platform_data = {
+ .x_line = 18,
+ .y_line = 12,
+ .x_size = 102*20,
+ .y_size = 68*20,
+ .blen = 0x80, /* Gain setting is in upper 4 bits */
+ .threshold = 0x32,
+ .voltage = 0, /* 3.3V */
+ .orient = MXT_VERTICAL_FLIP,
+ .irqflags = IRQF_TRIGGER_FALLING,
+ .is_tp = true,
+ .key_map = { KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ BTN_LEFT },
+ .config = NULL,
+ .config_length = 0,
+};
+
+static struct i2c_board_info __initdata atmel_224s_tp_device = {
+ I2C_BOARD_INFO("atmel_mxt_tp", ATMEL_TP_I2C_ADDR),
+ .platform_data = &atmel_224s_tp_platform_data,
+ .flags = I2C_CLIENT_WAKE,
+};
+
+static struct mxt_platform_data atmel_1664s_platform_data = {
+ .x_line = 32,
+ .y_line = 50,
+ .x_size = 1700,
+ .y_size = 2560,
+ .blen = 0x89, /* Gain setting is in upper 4 bits */
+ .threshold = 0x28,
+ .voltage = 0, /* 3.3V */
+ .orient = MXT_ROTATED_90_COUNTER,
+ .irqflags = IRQF_TRIGGER_FALLING,
+ .is_tp = false,
+ .config = NULL,
+ .config_length = 0,
+};
+
+static struct i2c_board_info __initdata atmel_1664s_device = {
+ I2C_BOARD_INFO("atmel_mxt_ts", ATMEL_TS_I2C_ADDR),
+ .platform_data = &atmel_1664s_platform_data,
+ .flags = I2C_CLIENT_WAKE,
+};
+
+static struct i2c_client __init *__add_probed_i2c_device(
+ const char *name,
+ int bus,
+ struct i2c_board_info *info,
+ const unsigned short *addrs)
+{
+ const struct dmi_device *dmi_dev;
+ const struct dmi_dev_onboard *dev_data;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ if (bus < 0)
+ return NULL;
+ /*
+ * If a name is specified, look for irq platform information stashed
+ * in DMI_DEV_TYPE_DEV_ONBOARD by the Chrome OS custom system firmware.
+ */
+ if (name) {
+ dmi_dev = dmi_find_device(DMI_DEV_TYPE_DEV_ONBOARD, name, NULL);
+ if (!dmi_dev) {
+ pr_err("%s failed to dmi find device %s.\n",
+ __func__,
+ name);
+ return NULL;
+ }
+ dev_data = (struct dmi_dev_onboard *)dmi_dev->device_data;
+ if (!dev_data) {
+ pr_err("%s failed to get data from dmi for %s.\n",
+ __func__, name);
+ return NULL;
+ }
+ info->irq = dev_data->instance;
+ }
+
+ adapter = i2c_get_adapter(bus);
+ if (!adapter) {
+ pr_err("%s failed to get i2c adapter %d.\n", __func__, bus);
+ return NULL;
+ }
+
+ /* add the i2c device */
+ client = i2c_new_probed_device(adapter, info, addrs, NULL);
+ if (!client)
+ pr_err("%s failed to register device %d-%02x\n",
+ __func__, bus, info->addr);
+ else
+ pr_debug("%s added i2c device %d-%02x\n",
+ __func__, bus, info->addr);
+
+ i2c_put_adapter(adapter);
+ return client;
+}
+
+static int __init __find_i2c_adap(struct device *dev, void *data)
+{
+ const char *name = data;
+ static const char *prefix = "i2c-";
+ struct i2c_adapter *adapter;
+ if (strncmp(dev_name(dev), prefix, strlen(prefix)) != 0)
+ return 0;
+ adapter = to_i2c_adapter(dev);
+ return (strncmp(adapter->name, name, strlen(name)) == 0);
+}
+
+static int __init find_i2c_adapter_num(enum i2c_adapter_type type)
+{
+ struct device *dev = NULL;
+ struct i2c_adapter *adapter;
+ const char *name = i2c_adapter_names[type];
+ /* find the adapter by name */
+ dev = bus_find_device(&i2c_bus_type, NULL, (void *)name,
+ __find_i2c_adap);
+ if (!dev) {
+ pr_err("%s: i2c adapter %s not found on system.\n", __func__,
+ name);
+ return -ENODEV;
+ }
+ adapter = to_i2c_adapter(dev);
+ return adapter->nr;
+}
+
+/*
+ * Takes a list of addresses in addrs as such :
+ * { addr1, ... , addrn, I2C_CLIENT_END };
+ * add_probed_i2c_device will use i2c_new_probed_device
+ * and probe for devices at all of the addresses listed.
+ * Returns NULL if no devices found.
+ * See Documentation/i2c/instantiating-devices for more information.
+ */
+static __init struct i2c_client *add_probed_i2c_device(
+ const char *name,
+ enum i2c_adapter_type type,
+ struct i2c_board_info *info,
+ const unsigned short *addrs)
+{
+ return __add_probed_i2c_device(name,
+ find_i2c_adapter_num(type),
+ info,
+ addrs);
+}
+
+/*
+ * Probes for a device at a single address, the one provided by
+ * info->addr.
+ * Returns NULL if no device found.
+ */
+static __init struct i2c_client *add_i2c_device(const char *name,
+ enum i2c_adapter_type type,
+ struct i2c_board_info *info)
+{
+ const unsigned short addr_list[] = { info->addr, I2C_CLIENT_END };
+ return __add_probed_i2c_device(name,
+ find_i2c_adapter_num(type),
+ info,
+ addr_list);
+}
+
+
+static struct i2c_client __init *add_smbus_device(const char *name,
+ struct i2c_board_info *info)
+{
+ return add_i2c_device(name, I2C_ADAPTER_SMBUS, info);
+}
+
+static int __init setup_cyapa_smbus_tp(const struct dmi_system_id *id)
+{
+ /* add cyapa touchpad on smbus */
+ tp = add_smbus_device("trackpad", &cyapa_device);
+ return 0;
+}
+
+static int __init setup_atmel_224s_tp(const struct dmi_system_id *id)
+{
+ const unsigned short addr_list[] = { ATMEL_TP_I2C_BL_ADDR,
+ ATMEL_TP_I2C_ADDR,
+ I2C_CLIENT_END };
+
+ /* add atmel mxt touchpad on VGA DDC GMBus */
+ tp = add_probed_i2c_device("trackpad", I2C_ADAPTER_VGADDC,
+ &atmel_224s_tp_device, addr_list);
+ return 0;
+}
+
+static int __init setup_atmel_1664s_ts(const struct dmi_system_id *id)
+{
+ const unsigned short addr_list[] = { ATMEL_TS_I2C_BL_ADDR,
+ ATMEL_TS_I2C_ADDR,
+ I2C_CLIENT_END };
+
+ /* add atmel mxt touch device on PANEL GMBus */
+ ts = add_probed_i2c_device("touchscreen", I2C_ADAPTER_PANEL,
+ &atmel_1664s_device, addr_list);
+ return 0;
+}
+
+
+static int __init setup_isl29018_als(const struct dmi_system_id *id)
+{
+ /* add isl29018 light sensor */
+ als = add_smbus_device("lightsensor", &isl_als_device);
+ return 0;
+}
+
+static int __init setup_isl29023_als(const struct dmi_system_id *id)
+{
+ /* add isl29023 light sensor on Panel GMBus */
+ als = add_i2c_device("lightsensor", I2C_ADAPTER_PANEL,
+ &isl_als_device);
+ return 0;
+}
+
+static int __init setup_tsl2583_als(const struct dmi_system_id *id)
+{
+ /* add tsl2583 light sensor on smbus */
+ als = add_smbus_device(NULL, &tsl2583_als_device);
+ return 0;
+}
+
+static int __init setup_tsl2563_als(const struct dmi_system_id *id)
+{
+ /* add tsl2563 light sensor on smbus */
+ als = add_smbus_device(NULL, &tsl2563_als_device);
+ return 0;
+}
+
+static struct dmi_system_id __initdata chromeos_laptop_dmi_table[] = {
+ {
+ .ident = "Samsung Series 5 550 - Touchpad",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Lumpy"),
+ },
+ .callback = setup_cyapa_smbus_tp,
+ },
+ {
+ .ident = "Chromebook Pixel - Touchscreen",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
+ },
+ .callback = setup_atmel_1664s_ts,
+ },
+ {
+ .ident = "Chromebook Pixel - Touchpad",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
+ },
+ .callback = setup_atmel_224s_tp,
+ },
+ {
+ .ident = "Samsung Series 5 550 - Light Sensor",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Lumpy"),
+ },
+ .callback = setup_isl29018_als,
+ },
+ {
+ .ident = "Chromebook Pixel - Light Sensor",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
+ },
+ .callback = setup_isl29023_als,
+ },
+ {
+ .ident = "Acer C7 Chromebook - Touchpad",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "Parrot"),
+ },
+ .callback = setup_cyapa_smbus_tp,
+ },
+ {
+ .ident = "HP Pavilion 14 Chromebook - Touchpad",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "Butterfly"),
+ },
+ .callback = setup_cyapa_smbus_tp,
+ },
+ {
+ .ident = "Samsung Series 5 - Light Sensor",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "Alex"),
+ },
+ .callback = setup_tsl2583_als,
+ },
+ {
+ .ident = "Cr-48 - Light Sensor",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "Mario"),
+ },
+ .callback = setup_tsl2563_als,
+ },
+ {
+ .ident = "Acer AC700 - Light Sensor",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
+ },
+ .callback = setup_tsl2563_als,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(dmi, chromeos_laptop_dmi_table);
+
+static int __init chromeos_laptop_init(void)
+{
+ if (!dmi_check_system(chromeos_laptop_dmi_table)) {
+ pr_debug("%s unsupported system.\n", __func__);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void __exit chromeos_laptop_exit(void)
+{
+ if (als)
+ i2c_unregister_device(als);
+ if (tp)
+ i2c_unregister_device(tp);
+ if (ts)
+ i2c_unregister_device(ts);
+}
+
+module_init(chromeos_laptop_init);
+module_exit(chromeos_laptop_exit);
+
+MODULE_DESCRIPTION("Chrome OS Laptop driver");
+MODULE_AUTHOR("Benson Leung <bleung@chromium.org>");
+MODULE_LICENSE("GPL");
If you have an ACPI-compatible ASUS laptop, say Y or M here.
-config CHROMEOS_LAPTOP
- tristate "Chrome OS Laptop"
- depends on I2C
- depends on DMI
- ---help---
- This driver instantiates i2c and smbus devices such as
- light sensors and touchpads.
-
- If you have a supported Chromebook, choose Y or M here.
- The module will be called chromeos_laptop.
-
config DELL_LAPTOP
tristate "Dell Laptop Extras"
depends on X86
obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o
obj-$(CONFIG_SAMSUNG_Q10) += samsung-q10.o
obj-$(CONFIG_APPLE_GMUX) += apple-gmux.o
-obj-$(CONFIG_CHROMEOS_LAPTOP) += chromeos_laptop.o
obj-$(CONFIG_INTEL_RST) += intel-rst.o
obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o
int error;
input = input_allocate_device();
- if (!input) {
- pr_warn("Unable to allocate input device\n");
+ if (!input)
return -ENOMEM;
- }
+
input->name = "Asus Laptop extra buttons";
input->phys = ASUS_LAPTOP_FILE "/input0";
input->id.bustype = BUS_HOST;
+++ /dev/null
-/*
- * chromeos_laptop.c - Driver to instantiate Chromebook i2c/smbus devices.
- *
- * Author : Benson Leung <bleung@chromium.org>
- *
- * Copyright (C) 2012 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/dmi.h>
-#include <linux/i2c.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-
-#define ATMEL_TP_I2C_ADDR 0x4b
-#define ATMEL_TP_I2C_BL_ADDR 0x25
-#define ATMEL_TS_I2C_ADDR 0x4a
-#define ATMEL_TS_I2C_BL_ADDR 0x26
-#define CYAPA_TP_I2C_ADDR 0x67
-#define ISL_ALS_I2C_ADDR 0x44
-#define TAOS_ALS_I2C_ADDR 0x29
-
-static struct i2c_client *als;
-static struct i2c_client *tp;
-static struct i2c_client *ts;
-
-const char *i2c_adapter_names[] = {
- "SMBus I801 adapter",
- "i915 gmbus vga",
- "i915 gmbus panel",
-};
-
-/* Keep this enum consistent with i2c_adapter_names */
-enum i2c_adapter_type {
- I2C_ADAPTER_SMBUS = 0,
- I2C_ADAPTER_VGADDC,
- I2C_ADAPTER_PANEL,
-};
-
-static struct i2c_board_info __initdata cyapa_device = {
- I2C_BOARD_INFO("cyapa", CYAPA_TP_I2C_ADDR),
- .flags = I2C_CLIENT_WAKE,
-};
-
-static struct i2c_board_info __initdata isl_als_device = {
- I2C_BOARD_INFO("isl29018", ISL_ALS_I2C_ADDR),
-};
-
-static struct i2c_board_info __initdata tsl2583_als_device = {
- I2C_BOARD_INFO("tsl2583", TAOS_ALS_I2C_ADDR),
-};
-
-static struct i2c_board_info __initdata tsl2563_als_device = {
- I2C_BOARD_INFO("tsl2563", TAOS_ALS_I2C_ADDR),
-};
-
-static struct mxt_platform_data atmel_224s_tp_platform_data = {
- .x_line = 18,
- .y_line = 12,
- .x_size = 102*20,
- .y_size = 68*20,
- .blen = 0x80, /* Gain setting is in upper 4 bits */
- .threshold = 0x32,
- .voltage = 0, /* 3.3V */
- .orient = MXT_VERTICAL_FLIP,
- .irqflags = IRQF_TRIGGER_FALLING,
- .is_tp = true,
- .key_map = { KEY_RESERVED,
- KEY_RESERVED,
- KEY_RESERVED,
- BTN_LEFT },
- .config = NULL,
- .config_length = 0,
-};
-
-static struct i2c_board_info __initdata atmel_224s_tp_device = {
- I2C_BOARD_INFO("atmel_mxt_tp", ATMEL_TP_I2C_ADDR),
- .platform_data = &atmel_224s_tp_platform_data,
- .flags = I2C_CLIENT_WAKE,
-};
-
-static struct mxt_platform_data atmel_1664s_platform_data = {
- .x_line = 32,
- .y_line = 50,
- .x_size = 1700,
- .y_size = 2560,
- .blen = 0x89, /* Gain setting is in upper 4 bits */
- .threshold = 0x28,
- .voltage = 0, /* 3.3V */
- .orient = MXT_ROTATED_90_COUNTER,
- .irqflags = IRQF_TRIGGER_FALLING,
- .is_tp = false,
- .config = NULL,
- .config_length = 0,
-};
-
-static struct i2c_board_info __initdata atmel_1664s_device = {
- I2C_BOARD_INFO("atmel_mxt_ts", ATMEL_TS_I2C_ADDR),
- .platform_data = &atmel_1664s_platform_data,
- .flags = I2C_CLIENT_WAKE,
-};
-
-static struct i2c_client __init *__add_probed_i2c_device(
- const char *name,
- int bus,
- struct i2c_board_info *info,
- const unsigned short *addrs)
-{
- const struct dmi_device *dmi_dev;
- const struct dmi_dev_onboard *dev_data;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- if (bus < 0)
- return NULL;
- /*
- * If a name is specified, look for irq platform information stashed
- * in DMI_DEV_TYPE_DEV_ONBOARD by the Chrome OS custom system firmware.
- */
- if (name) {
- dmi_dev = dmi_find_device(DMI_DEV_TYPE_DEV_ONBOARD, name, NULL);
- if (!dmi_dev) {
- pr_err("%s failed to dmi find device %s.\n",
- __func__,
- name);
- return NULL;
- }
- dev_data = (struct dmi_dev_onboard *)dmi_dev->device_data;
- if (!dev_data) {
- pr_err("%s failed to get data from dmi for %s.\n",
- __func__, name);
- return NULL;
- }
- info->irq = dev_data->instance;
- }
-
- adapter = i2c_get_adapter(bus);
- if (!adapter) {
- pr_err("%s failed to get i2c adapter %d.\n", __func__, bus);
- return NULL;
- }
-
- /* add the i2c device */
- client = i2c_new_probed_device(adapter, info, addrs, NULL);
- if (!client)
- pr_err("%s failed to register device %d-%02x\n",
- __func__, bus, info->addr);
- else
- pr_debug("%s added i2c device %d-%02x\n",
- __func__, bus, info->addr);
-
- i2c_put_adapter(adapter);
- return client;
-}
-
-static int __init __find_i2c_adap(struct device *dev, void *data)
-{
- const char *name = data;
- static const char *prefix = "i2c-";
- struct i2c_adapter *adapter;
- if (strncmp(dev_name(dev), prefix, strlen(prefix)) != 0)
- return 0;
- adapter = to_i2c_adapter(dev);
- return (strncmp(adapter->name, name, strlen(name)) == 0);
-}
-
-static int __init find_i2c_adapter_num(enum i2c_adapter_type type)
-{
- struct device *dev = NULL;
- struct i2c_adapter *adapter;
- const char *name = i2c_adapter_names[type];
- /* find the adapter by name */
- dev = bus_find_device(&i2c_bus_type, NULL, (void *)name,
- __find_i2c_adap);
- if (!dev) {
- pr_err("%s: i2c adapter %s not found on system.\n", __func__,
- name);
- return -ENODEV;
- }
- adapter = to_i2c_adapter(dev);
- return adapter->nr;
-}
-
-/*
- * Takes a list of addresses in addrs as such :
- * { addr1, ... , addrn, I2C_CLIENT_END };
- * add_probed_i2c_device will use i2c_new_probed_device
- * and probe for devices at all of the addresses listed.
- * Returns NULL if no devices found.
- * See Documentation/i2c/instantiating-devices for more information.
- */
-static __init struct i2c_client *add_probed_i2c_device(
- const char *name,
- enum i2c_adapter_type type,
- struct i2c_board_info *info,
- const unsigned short *addrs)
-{
- return __add_probed_i2c_device(name,
- find_i2c_adapter_num(type),
- info,
- addrs);
-}
-
-/*
- * Probes for a device at a single address, the one provided by
- * info->addr.
- * Returns NULL if no device found.
- */
-static __init struct i2c_client *add_i2c_device(const char *name,
- enum i2c_adapter_type type,
- struct i2c_board_info *info)
-{
- const unsigned short addr_list[] = { info->addr, I2C_CLIENT_END };
- return __add_probed_i2c_device(name,
- find_i2c_adapter_num(type),
- info,
- addr_list);
-}
-
-
-static struct i2c_client __init *add_smbus_device(const char *name,
- struct i2c_board_info *info)
-{
- return add_i2c_device(name, I2C_ADAPTER_SMBUS, info);
-}
-
-static int __init setup_cyapa_smbus_tp(const struct dmi_system_id *id)
-{
- /* add cyapa touchpad on smbus */
- tp = add_smbus_device("trackpad", &cyapa_device);
- return 0;
-}
-
-static int __init setup_atmel_224s_tp(const struct dmi_system_id *id)
-{
- const unsigned short addr_list[] = { ATMEL_TP_I2C_BL_ADDR,
- ATMEL_TP_I2C_ADDR,
- I2C_CLIENT_END };
-
- /* add atmel mxt touchpad on VGA DDC GMBus */
- tp = add_probed_i2c_device("trackpad", I2C_ADAPTER_VGADDC,
- &atmel_224s_tp_device, addr_list);
- return 0;
-}
-
-static int __init setup_atmel_1664s_ts(const struct dmi_system_id *id)
-{
- const unsigned short addr_list[] = { ATMEL_TS_I2C_BL_ADDR,
- ATMEL_TS_I2C_ADDR,
- I2C_CLIENT_END };
-
- /* add atmel mxt touch device on PANEL GMBus */
- ts = add_probed_i2c_device("touchscreen", I2C_ADAPTER_PANEL,
- &atmel_1664s_device, addr_list);
- return 0;
-}
-
-
-static int __init setup_isl29018_als(const struct dmi_system_id *id)
-{
- /* add isl29018 light sensor */
- als = add_smbus_device("lightsensor", &isl_als_device);
- return 0;
-}
-
-static int __init setup_isl29023_als(const struct dmi_system_id *id)
-{
- /* add isl29023 light sensor on Panel GMBus */
- als = add_i2c_device("lightsensor", I2C_ADAPTER_PANEL,
- &isl_als_device);
- return 0;
-}
-
-static int __init setup_tsl2583_als(const struct dmi_system_id *id)
-{
- /* add tsl2583 light sensor on smbus */
- als = add_smbus_device(NULL, &tsl2583_als_device);
- return 0;
-}
-
-static int __init setup_tsl2563_als(const struct dmi_system_id *id)
-{
- /* add tsl2563 light sensor on smbus */
- als = add_smbus_device(NULL, &tsl2563_als_device);
- return 0;
-}
-
-static struct dmi_system_id __initdata chromeos_laptop_dmi_table[] = {
- {
- .ident = "Samsung Series 5 550 - Touchpad",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Lumpy"),
- },
- .callback = setup_cyapa_smbus_tp,
- },
- {
- .ident = "Chromebook Pixel - Touchscreen",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
- },
- .callback = setup_atmel_1664s_ts,
- },
- {
- .ident = "Chromebook Pixel - Touchpad",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
- },
- .callback = setup_atmel_224s_tp,
- },
- {
- .ident = "Samsung Series 5 550 - Light Sensor",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Lumpy"),
- },
- .callback = setup_isl29018_als,
- },
- {
- .ident = "Chromebook Pixel - Light Sensor",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Link"),
- },
- .callback = setup_isl29023_als,
- },
- {
- .ident = "Acer C7 Chromebook - Touchpad",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "Parrot"),
- },
- .callback = setup_cyapa_smbus_tp,
- },
- {
- .ident = "HP Pavilion 14 Chromebook - Touchpad",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "Butterfly"),
- },
- .callback = setup_cyapa_smbus_tp,
- },
- {
- .ident = "Samsung Series 5 - Light Sensor",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "Alex"),
- },
- .callback = setup_tsl2583_als,
- },
- {
- .ident = "Cr-48 - Light Sensor",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "Mario"),
- },
- .callback = setup_tsl2563_als,
- },
- {
- .ident = "Acer AC700 - Light Sensor",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
- },
- .callback = setup_tsl2563_als,
- },
- { }
-};
-MODULE_DEVICE_TABLE(dmi, chromeos_laptop_dmi_table);
-
-static int __init chromeos_laptop_init(void)
-{
- if (!dmi_check_system(chromeos_laptop_dmi_table)) {
- pr_debug("%s unsupported system.\n", __func__);
- return -ENODEV;
- }
- return 0;
-}
-
-static void __exit chromeos_laptop_exit(void)
-{
- if (als)
- i2c_unregister_device(als);
- if (tp)
- i2c_unregister_device(tp);
- if (ts)
- i2c_unregister_device(ts);
-}
-
-module_init(chromeos_laptop_init);
-module_exit(chromeos_laptop_exit);
-
-MODULE_DESCRIPTION("Chrome OS Laptop driver");
-MODULE_AUTHOR("Benson Leung <bleung@chromium.org>");
-MODULE_LICENSE("GPL");
#include <linux/err.h>
#include <linux/dmi.h>
#include <linux/io.h>
+#include <linux/rfkill.h>
#include <linux/power_supply.h>
#include <linux/acpi.h>
#include <linux/mm.h>
static struct platform_device *platform_device;
static struct backlight_device *dell_backlight_device;
+static struct rfkill *wifi_rfkill;
+static struct rfkill *bluetooth_rfkill;
+static struct rfkill *wwan_rfkill;
+static bool force_rfkill;
+
+module_param(force_rfkill, bool, 0444);
+MODULE_PARM_DESC(force_rfkill, "enable rfkill on non whitelisted models");
static const struct dmi_system_id dell_device_table[] __initconst = {
{
return buffer;
}
+/* Derived from information in DellWirelessCtl.cpp:
+ Class 17, select 11 is radio control. It returns an array of 32-bit values.
+
+ Input byte 0 = 0: Wireless information
+
+ result[0]: return code
+ result[1]:
+ Bit 0: Hardware switch supported
+ Bit 1: Wifi locator supported
+ Bit 2: Wifi is supported
+ Bit 3: Bluetooth is supported
+ Bit 4: WWAN is supported
+ Bit 5: Wireless keyboard supported
+ Bits 6-7: Reserved
+ Bit 8: Wifi is installed
+ Bit 9: Bluetooth is installed
+ Bit 10: WWAN is installed
+ Bits 11-15: Reserved
+ Bit 16: Hardware switch is on
+ Bit 17: Wifi is blocked
+ Bit 18: Bluetooth is blocked
+ Bit 19: WWAN is blocked
+ Bits 20-31: Reserved
+ result[2]: NVRAM size in bytes
+ result[3]: NVRAM format version number
+
+ Input byte 0 = 2: Wireless switch configuration
+ result[0]: return code
+ result[1]:
+ Bit 0: Wifi controlled by switch
+ Bit 1: Bluetooth controlled by switch
+ Bit 2: WWAN controlled by switch
+ Bits 3-6: Reserved
+ Bit 7: Wireless switch config locked
+ Bit 8: Wifi locator enabled
+ Bits 9-14: Reserved
+ Bit 15: Wifi locator setting locked
+ Bits 16-31: Reserved
+*/
+
+static int dell_rfkill_set(void *data, bool blocked)
+{
+ int disable = blocked ? 1 : 0;
+ unsigned long radio = (unsigned long)data;
+ int hwswitch_bit = (unsigned long)data - 1;
+
+ get_buffer();
+ dell_send_request(buffer, 17, 11);
+
+ /* If the hardware switch controls this radio, and the hardware
+ switch is disabled, always disable the radio */
+ if ((hwswitch_state & BIT(hwswitch_bit)) &&
+ !(buffer->output[1] & BIT(16)))
+ disable = 1;
+
+ buffer->input[0] = (1 | (radio<<8) | (disable << 16));
+ dell_send_request(buffer, 17, 11);
+
+ release_buffer();
+ return 0;
+}
+
+/* Must be called with the buffer held */
+static void dell_rfkill_update_sw_state(struct rfkill *rfkill, int radio,
+ int status)
+{
+ if (status & BIT(0)) {
+ /* Has hw-switch, sync sw_state to BIOS */
+ int block = rfkill_blocked(rfkill);
+ buffer->input[0] = (1 | (radio << 8) | (block << 16));
+ dell_send_request(buffer, 17, 11);
+ } else {
+ /* No hw-switch, sync BIOS state to sw_state */
+ rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16)));
+ }
+}
+
+static void dell_rfkill_update_hw_state(struct rfkill *rfkill, int radio,
+ int status)
+{
+ if (hwswitch_state & (BIT(radio - 1)))
+ rfkill_set_hw_state(rfkill, !(status & BIT(16)));
+}
+
+static void dell_rfkill_query(struct rfkill *rfkill, void *data)
+{
+ int status;
+
+ get_buffer();
+ dell_send_request(buffer, 17, 11);
+ status = buffer->output[1];
+
+ dell_rfkill_update_hw_state(rfkill, (unsigned long)data, status);
+
+ release_buffer();
+}
+
+static const struct rfkill_ops dell_rfkill_ops = {
+ .set_block = dell_rfkill_set,
+ .query = dell_rfkill_query,
+};
+
static struct dentry *dell_laptop_dir;
static int dell_debugfs_show(struct seq_file *s, void *data)
.release = single_release,
};
+static void dell_update_rfkill(struct work_struct *ignored)
+{
+ int status;
+
+ get_buffer();
+ dell_send_request(buffer, 17, 11);
+ status = buffer->output[1];
+
+ if (wifi_rfkill) {
+ dell_rfkill_update_hw_state(wifi_rfkill, 1, status);
+ dell_rfkill_update_sw_state(wifi_rfkill, 1, status);
+ }
+ if (bluetooth_rfkill) {
+ dell_rfkill_update_hw_state(bluetooth_rfkill, 2, status);
+ dell_rfkill_update_sw_state(bluetooth_rfkill, 2, status);
+ }
+ if (wwan_rfkill) {
+ dell_rfkill_update_hw_state(wwan_rfkill, 3, status);
+ dell_rfkill_update_sw_state(wwan_rfkill, 3, status);
+ }
+
+ release_buffer();
+}
+static DECLARE_DELAYED_WORK(dell_rfkill_work, dell_update_rfkill);
+
+
+static int __init dell_setup_rfkill(void)
+{
+ int status;
+ int ret;
+ const char *product;
+
+ /*
+ * rfkill causes trouble on various non Latitudes, according to Dell
+ * actually testing the rfkill functionality is only done on Latitudes.
+ */
+ product = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (!force_rfkill && (!product || strncmp(product, "Latitude", 8)))
+ return 0;
+
+ get_buffer();
+ dell_send_request(buffer, 17, 11);
+ status = buffer->output[1];
+ buffer->input[0] = 0x2;
+ dell_send_request(buffer, 17, 11);
+ hwswitch_state = buffer->output[1];
+ release_buffer();
+
+ if (!(status & BIT(0))) {
+ if (force_rfkill) {
+ /* No hwsitch, clear all hw-controlled bits */
+ hwswitch_state &= ~7;
+ } else {
+ /* rfkill is only tested on laptops with a hwswitch */
+ return 0;
+ }
+ }
+
+ if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) {
+ wifi_rfkill = rfkill_alloc("dell-wifi", &platform_device->dev,
+ RFKILL_TYPE_WLAN,
+ &dell_rfkill_ops, (void *) 1);
+ if (!wifi_rfkill) {
+ ret = -ENOMEM;
+ goto err_wifi;
+ }
+ ret = rfkill_register(wifi_rfkill);
+ if (ret)
+ goto err_wifi;
+ }
+
+ if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) {
+ bluetooth_rfkill = rfkill_alloc("dell-bluetooth",
+ &platform_device->dev,
+ RFKILL_TYPE_BLUETOOTH,
+ &dell_rfkill_ops, (void *) 2);
+ if (!bluetooth_rfkill) {
+ ret = -ENOMEM;
+ goto err_bluetooth;
+ }
+ ret = rfkill_register(bluetooth_rfkill);
+ if (ret)
+ goto err_bluetooth;
+ }
+
+ if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) {
+ wwan_rfkill = rfkill_alloc("dell-wwan",
+ &platform_device->dev,
+ RFKILL_TYPE_WWAN,
+ &dell_rfkill_ops, (void *) 3);
+ if (!wwan_rfkill) {
+ ret = -ENOMEM;
+ goto err_wwan;
+ }
+ ret = rfkill_register(wwan_rfkill);
+ if (ret)
+ goto err_wwan;
+ }
+
+ return 0;
+err_wwan:
+ rfkill_destroy(wwan_rfkill);
+ if (bluetooth_rfkill)
+ rfkill_unregister(bluetooth_rfkill);
+err_bluetooth:
+ rfkill_destroy(bluetooth_rfkill);
+ if (wifi_rfkill)
+ rfkill_unregister(wifi_rfkill);
+err_wifi:
+ rfkill_destroy(wifi_rfkill);
+
+ return ret;
+}
+
+static void dell_cleanup_rfkill(void)
+{
+ if (wifi_rfkill) {
+ rfkill_unregister(wifi_rfkill);
+ rfkill_destroy(wifi_rfkill);
+ }
+ if (bluetooth_rfkill) {
+ rfkill_unregister(bluetooth_rfkill);
+ rfkill_destroy(bluetooth_rfkill);
+ }
+ if (wwan_rfkill) {
+ rfkill_unregister(wwan_rfkill);
+ rfkill_destroy(wwan_rfkill);
+ }
+}
+
static int dell_send_intensity(struct backlight_device *bd)
{
int ret = 0;
led_classdev_unregister(&touchpad_led);
}
+static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
+ struct serio *port)
+{
+ static bool extended;
+
+ if (str & 0x20)
+ return false;
+
+ if (unlikely(data == 0xe0)) {
+ extended = true;
+ return false;
+ } else if (unlikely(extended)) {
+ switch (data) {
+ case 0x8:
+ schedule_delayed_work(&dell_rfkill_work,
+ round_jiffies_relative(HZ / 4));
+ break;
+ }
+ extended = false;
+ }
+
+ return false;
+}
+
static int __init dell_init(void)
{
int max_intensity = 0;
}
buffer = page_address(bufferpage);
+ ret = dell_setup_rfkill();
+
+ if (ret) {
+ pr_warn("Unable to setup rfkill\n");
+ goto fail_rfkill;
+ }
+
+ ret = i8042_install_filter(dell_laptop_i8042_filter);
+ if (ret) {
+ pr_warn("Unable to install key filter\n");
+ goto fail_filter;
+ }
+
if (quirks && quirks->touchpad_led)
touchpad_led_init(&platform_device->dev);
dell_laptop_dir = debugfs_create_dir("dell_laptop", NULL);
+ if (dell_laptop_dir != NULL)
+ debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL,
+ &dell_debugfs_fops);
#ifdef CONFIG_ACPI
/* In the event of an ACPI backlight being available, don't
return 0;
fail_backlight:
+ i8042_remove_filter(dell_laptop_i8042_filter);
+ cancel_delayed_work_sync(&dell_rfkill_work);
+fail_filter:
+ dell_cleanup_rfkill();
+fail_rfkill:
free_page((unsigned long)bufferpage);
fail_buffer:
platform_device_del(platform_device);
debugfs_remove_recursive(dell_laptop_dir);
if (quirks && quirks->touchpad_led)
touchpad_led_exit();
+ i8042_remove_filter(dell_laptop_i8042_filter);
+ cancel_delayed_work_sync(&dell_rfkill_work);
backlight_device_unregister(dell_backlight_device);
+ dell_cleanup_rfkill();
if (platform_device) {
platform_device_unregister(platform_device);
platform_driver_unregister(&platform_driver);
KEY_BRIGHTNESSUP, KEY_UNKNOWN, KEY_KBDILLUMTOGGLE,
KEY_UNKNOWN, KEY_SWITCHVIDEOMODE, KEY_UNKNOWN, KEY_UNKNOWN,
KEY_SWITCHVIDEOMODE, KEY_UNKNOWN, KEY_UNKNOWN, KEY_PROG2,
- KEY_UNKNOWN, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+ KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_MICMUTE,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- KEY_PROG3
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PROG3
};
static struct input_dev *dell_wmi_input_dev;
int error;
input = input_allocate_device();
- if (!input) {
- pr_info("Unable to allocate input device\n");
+ if (!input)
return -ENOMEM;
- }
input->name = "Asus EeePC extra buttons";
input->phys = EEEPC_LAPTOP_FILE "/input0";
#define HPWMI_HARDWARE_QUERY 0x4
#define HPWMI_WIRELESS_QUERY 0x5
#define HPWMI_HOTKEY_QUERY 0xc
+#define HPWMI_FEATURE_QUERY 0xd
#define HPWMI_WIRELESS2_QUERY 0x1b
#define HPWMI_POSTCODEERROR_QUERY 0x2a
return (state & 0x4) ? 1 : 0;
}
+static int hp_wmi_bios_2009_later(void)
+{
+ int state = 0;
+ int ret = hp_wmi_perform_query(HPWMI_FEATURE_QUERY, 0, &state,
+ sizeof(state), sizeof(state));
+ if (ret)
+ return ret;
+
+ return (state & 0x10) ? 1 : 0;
+}
+
static int hp_wmi_set_block(void *data, bool blocked)
{
enum hp_wmi_radio r = (enum hp_wmi_radio) data;
gps_rfkill = NULL;
rfkill2_count = 0;
- if (hp_wmi_rfkill_setup(device))
+ if (hp_wmi_bios_2009_later() || hp_wmi_rfkill_setup(device))
hp_wmi_rfkill2_setup(device);
err = device_create_file(&device->dev, &dev_attr_display);
int error;
inputdev = input_allocate_device();
- if (!inputdev) {
- pr_info("Unable to allocate input device\n");
+ if (!inputdev)
return -ENOMEM;
- }
inputdev->name = "Ideapad extra buttons";
inputdev->phys = "ideapad/input0";
return -EINVAL;
input = input_allocate_device();
- if (!input) {
- dev_err(&pdev->dev, "Input device allocation error\n");
+ if (!input)
return -ENOMEM;
- }
input->name = pdev->name;
input->phys = "power-button/input0";
* message handler is called within firmware.
*/
-#define IPC_BASE_ADDR 0xFF11C000 /* IPC1 base register address */
-#define IPC_MAX_ADDR 0x100 /* Maximum IPC regisers */
#define IPC_WWBUF_SIZE 20 /* IPC Write buffer Size */
#define IPC_RWBUF_SIZE 20 /* IPC Read buffer Size */
-#define IPC_I2C_BASE 0xFF12B000 /* I2C control register base address */
-#define IPC_I2C_MAX_ADDR 0x10 /* Maximum I2C regisers */
+#define IPC_IOC 0x100 /* IPC command register IOC bit */
+
+enum {
+ SCU_IPC_LINCROFT,
+ SCU_IPC_PENWELL,
+ SCU_IPC_CLOVERVIEW,
+ SCU_IPC_TANGIER,
+};
+
+/* intel scu ipc driver data*/
+struct intel_scu_ipc_pdata_t {
+ u32 ipc_base;
+ u32 i2c_base;
+ u32 ipc_len;
+ u32 i2c_len;
+ u8 irq_mode;
+};
+
+static struct intel_scu_ipc_pdata_t intel_scu_ipc_pdata[] = {
+ [SCU_IPC_LINCROFT] = {
+ .ipc_base = 0xff11c000,
+ .i2c_base = 0xff12b000,
+ .ipc_len = 0x100,
+ .i2c_len = 0x10,
+ .irq_mode = 0,
+ },
+ [SCU_IPC_PENWELL] = {
+ .ipc_base = 0xff11c000,
+ .i2c_base = 0xff12b000,
+ .ipc_len = 0x100,
+ .i2c_len = 0x10,
+ .irq_mode = 1,
+ },
+ [SCU_IPC_CLOVERVIEW] = {
+ .ipc_base = 0xff11c000,
+ .i2c_base = 0xff12b000,
+ .ipc_len = 0x100,
+ .i2c_len = 0x10,
+ .irq_mode = 1,
+ },
+ [SCU_IPC_TANGIER] = {
+ .ipc_base = 0xff009000,
+ .i2c_base = 0xff00d000,
+ .ipc_len = 0x100,
+ .i2c_len = 0x10,
+ .irq_mode = 0,
+ },
+};
static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id);
static void ipc_remove(struct pci_dev *pdev);
struct pci_dev *pdev;
void __iomem *ipc_base;
void __iomem *i2c_base;
+ struct completion cmd_complete;
+ u8 irq_mode;
};
static struct intel_scu_ipc_dev ipcdev; /* Only one for now */
*/
static inline void ipc_command(u32 cmd) /* Send ipc command */
{
+ if (ipcdev.irq_mode) {
+ reinit_completion(&ipcdev.cmd_complete);
+ writel(cmd | IPC_IOC, ipcdev.ipc_base);
+ }
writel(cmd, ipcdev.ipc_base);
}
return 0;
}
+/* Wait till ipc ioc interrupt is received or timeout in 3 HZ */
+static inline int ipc_wait_for_interrupt(void)
+{
+ int status;
+
+ if (!wait_for_completion_timeout(&ipcdev.cmd_complete, 3 * HZ)) {
+ struct device *dev = &ipcdev.pdev->dev;
+ dev_err(dev, "IPC timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ status = ipc_read_status();
+
+ if ((status >> 1) & 1)
+ return -EIO;
+
+ return 0;
+}
+
+int intel_scu_ipc_check_status(void)
+{
+ return ipcdev.irq_mode ? ipc_wait_for_interrupt() : busy_loop();
+}
+
/* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
{
ipc_command(4 << 16 | id << 12 | 0 << 8 | op);
}
- err = busy_loop();
- if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
+ err = intel_scu_ipc_check_status();
+ if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
/* Workaround: values are read as 0 without memcpy_fromio */
memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16);
for (nc = 0; nc < count; nc++)
return -ENODEV;
}
ipc_command(sub << 12 | cmd);
- err = busy_loop();
+ err = intel_scu_ipc_check_status();
mutex_unlock(&ipclock);
return err;
}
ipc_data_writel(*in++, 4 * i);
ipc_command((inlen << 16) | (sub << 12) | cmd);
- err = busy_loop();
+ err = intel_scu_ipc_check_status();
- for (i = 0; i < outlen; i++)
- *out++ = ipc_data_readl(4 * i);
+ if (!err) {
+ for (i = 0; i < outlen; i++)
+ *out++ = ipc_data_readl(4 * i);
+ }
mutex_unlock(&ipclock);
return err;
*/
static irqreturn_t ioc(int irq, void *dev_id)
{
+ if (ipcdev.irq_mode)
+ complete(&ipcdev.cmd_complete);
+
return IRQ_HANDLED;
}
*/
static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
- int err;
+ int err, pid;
+ struct intel_scu_ipc_pdata_t *pdata;
resource_size_t pci_resource;
if (ipcdev.pdev) /* We support only one SCU */
return -EBUSY;
+ pid = id->driver_data;
+ pdata = &intel_scu_ipc_pdata[pid];
+
ipcdev.pdev = pci_dev_get(dev);
+ ipcdev.irq_mode = pdata->irq_mode;
err = pci_enable_device(dev);
if (err)
if (!pci_resource)
return -ENOMEM;
+ init_completion(&ipcdev.cmd_complete);
+
if (request_irq(dev->irq, ioc, 0, "intel_scu_ipc", &ipcdev))
return -EBUSY;
- ipcdev.ipc_base = ioremap_nocache(IPC_BASE_ADDR, IPC_MAX_ADDR);
+ ipcdev.ipc_base = ioremap_nocache(pdata->ipc_base, pdata->ipc_len);
if (!ipcdev.ipc_base)
return -ENOMEM;
- ipcdev.i2c_base = ioremap_nocache(IPC_I2C_BASE, IPC_I2C_MAX_ADDR);
+ ipcdev.i2c_base = ioremap_nocache(pdata->i2c_base, pdata->i2c_len);
if (!ipcdev.i2c_base) {
iounmap(ipcdev.ipc_base);
return -ENOMEM;
}
static DEFINE_PCI_DEVICE_TABLE(pci_ids) = {
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)},
+ {PCI_VDEVICE(INTEL, 0x082a), SCU_IPC_LINCROFT},
+ {PCI_VDEVICE(INTEL, 0x080e), SCU_IPC_PENWELL},
+ {PCI_VDEVICE(INTEL, 0x08ea), SCU_IPC_CLOVERVIEW},
+ {PCI_VDEVICE(INTEL, 0x11a0), SCU_IPC_TANGIER},
{ 0,}
};
MODULE_DEVICE_TABLE(pci, pci_ids);
int error;
input_dev = input_allocate_device();
- if (!input_dev) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Couldn't allocate input device for hotkey"));
+ if (!input_dev)
return -ENOMEM;
- }
input_dev->name = ACPI_PCC_DRIVER_NAME;
input_dev->phys = ACPI_PCC_INPUT_PHYS;
"on the model (default: no change from current value)");
#ifdef CONFIG_PM_SLEEP
-static void sony_nc_kbd_backlight_resume(void);
static void sony_nc_thermal_resume(void);
#endif
static int sony_nc_kbd_backlight_setup(struct platform_device *pd,
unsigned int handle);
-static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd);
+static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd,
+ unsigned int handle);
static int sony_nc_battery_care_setup(struct platform_device *pd,
unsigned int handle);
KEY_FN_F10, /* 14 SONYPI_EVENT_FNKEY_F10 */
KEY_FN_F11, /* 15 SONYPI_EVENT_FNKEY_F11 */
KEY_FN_F12, /* 16 SONYPI_EVENT_FNKEY_F12 */
- KEY_FN_F1, /* 17 SONYPI_EVENT_FNKEY_1 */
- KEY_FN_F2, /* 18 SONYPI_EVENT_FNKEY_2 */
+ KEY_FN_1, /* 17 SONYPI_EVENT_FNKEY_1 */
+ KEY_FN_2, /* 18 SONYPI_EVENT_FNKEY_2 */
KEY_FN_D, /* 19 SONYPI_EVENT_FNKEY_D */
KEY_FN_E, /* 20 SONYPI_EVENT_FNKEY_E */
KEY_FN_F, /* 21 SONYPI_EVENT_FNKEY_F */
case 0x014b:
case 0x014c:
case 0x0163:
- sony_nc_kbd_backlight_cleanup(pd);
+ sony_nc_kbd_backlight_cleanup(pd, handle);
break;
default:
continue;
case 0x0135:
sony_nc_rfkill_update();
break;
- case 0x0137:
- case 0x0143:
- case 0x014b:
- case 0x014c:
- case 0x0163:
- sony_nc_kbd_backlight_resume();
- break;
default:
continue;
}
int result;
int ret = 0;
+ if (kbdbl_ctl) {
+ pr_warn("handle 0x%.4x: keyboard backlight setup already done for 0x%.4x\n",
+ handle, kbdbl_ctl->handle);
+ return -EBUSY;
+ }
+
/* verify the kbd backlight presence, these handles are not used for
* keyboard backlight only
*/
return ret;
}
-static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd)
+static void sony_nc_kbd_backlight_cleanup(struct platform_device *pd,
+ unsigned int handle)
{
- if (kbdbl_ctl) {
+ if (kbdbl_ctl && handle == kbdbl_ctl->handle) {
device_remove_file(&pd->dev, &kbdbl_ctl->mode_attr);
device_remove_file(&pd->dev, &kbdbl_ctl->timeout_attr);
kfree(kbdbl_ctl);
}
}
-#ifdef CONFIG_PM_SLEEP
-static void sony_nc_kbd_backlight_resume(void)
-{
- int ignore = 0;
-
- if (!kbdbl_ctl)
- return;
-
- if (kbdbl_ctl->mode == 0)
- sony_call_snc_handle(kbdbl_ctl->handle, kbdbl_ctl->base,
- &ignore);
-
- if (kbdbl_ctl->timeout != 0)
- sony_call_snc_handle(kbdbl_ctl->handle,
- (kbdbl_ctl->base + 0x200) |
- (kbdbl_ctl->timeout << 0x10), &ignore);
-}
-#endif
-
struct battery_care_control {
struct device_attribute attrs[2];
unsigned int handle;
#define TPACPI_ALSA_SHRTNAME "ThinkPad Console Audio Control"
#define TPACPI_ALSA_MIXERNAME TPACPI_ALSA_SHRTNAME
-static int alsa_index = ~((1 << (SNDRV_CARDS - 3)) - 1); /* last three slots */
+#if SNDRV_CARDS <= 32
+#define DEFAULT_ALSA_IDX ~((1 << (SNDRV_CARDS - 3)) - 1)
+#else
+#define DEFAULT_ALSA_IDX ~((1 << (32 - 3)) - 1)
+#endif
+static int alsa_index = DEFAULT_ALSA_IDX; /* last three slots */
static char *alsa_id = "ThinkPadEC";
static bool alsa_enable = SNDRV_DEFAULT_ENABLE1;
mutex_init(&tpacpi_inputdev_send_mutex);
tpacpi_inputdev = input_allocate_device();
if (!tpacpi_inputdev) {
- pr_err("unable to allocate input device\n");
thinkpad_acpi_module_exit();
return -ENOMEM;
} else {
int error;
input = input_allocate_device();
- if (!input) {
- pr_err("Unable to allocate input device\n");
+ if (!input)
return -ENOMEM;
- }
input->name = "Topstar Laptop extra buttons";
input->phys = "topstar/input0";
u32 hci_result;
dev->hotkey_dev = input_allocate_device();
- if (!dev->hotkey_dev) {
- pr_info("Unable to register input device\n");
+ if (!dev->hotkey_dev)
return -ENOMEM;
- }
dev->hotkey_dev->name = "Toshiba input device";
dev->hotkey_dev->phys = "toshiba_acpi/input0";
struct wmi_block *wblock;
wblock = dev_get_drvdata(dev);
- if (!wblock)
- return -ENOMEM;
+ if (!wblock) {
+ strcat(buf, "\n");
+ return strlen(buf);
+ }
wmi_gtoa(wblock->gblock.guid, guid_string);
return __pnp_bus_suspend(dev, PMSG_FREEZE);
}
+static int pnp_bus_poweroff(struct device *dev)
+{
+ return __pnp_bus_suspend(dev, PMSG_HIBERNATE);
+}
+
static int pnp_bus_resume(struct device *dev)
{
struct pnp_dev *pnp_dev = to_pnp_dev(dev);
}
static const struct dev_pm_ops pnp_bus_dev_pm_ops = {
+ /* Suspend callbacks */
.suspend = pnp_bus_suspend,
- .freeze = pnp_bus_freeze,
.resume = pnp_bus_resume,
+ /* Hibernate callbacks */
+ .freeze = pnp_bus_freeze,
+ .thaw = pnp_bus_resume,
+ .poweroff = pnp_bus_poweroff,
+ .restore = pnp_bus_resume,
};
struct bus_type pnp_bus_type = {
if (power_zone->ops->get_max_energy_range_uj)
power_zone->zone_dev_attrs[count++] =
&dev_attr_max_energy_range_uj.attr;
- if (power_zone->ops->get_energy_uj)
+ if (power_zone->ops->get_energy_uj) {
+ if (power_zone->ops->reset_energy_uj)
+ dev_attr_energy_uj.attr.mode = S_IWUSR | S_IRUGO;
+ else
+ dev_attr_energy_uj.attr.mode = S_IRUGO;
power_zone->zone_dev_attrs[count++] =
&dev_attr_energy_uj.attr;
+ }
if (power_zone->ops->get_power_uw)
power_zone->zone_dev_attrs[count++] =
&dev_attr_power_uw.attr;
.owner = THIS_MODULE,
};
+static const struct regulator_linear_range arizona_micsupp_ext_ranges[] = {
+ REGULATOR_LINEAR_RANGE(900000, 0, 0x14, 25000),
+ REGULATOR_LINEAR_RANGE(1500000, 0x15, 0x27, 100000),
+};
+
+static const struct regulator_desc arizona_micsupp_ext = {
+ .name = "MICVDD",
+ .supply_name = "CPVDD",
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = 40,
+ .ops = &arizona_micsupp_ops,
+
+ .vsel_reg = ARIZONA_LDO2_CONTROL_1,
+ .vsel_mask = ARIZONA_LDO2_VSEL_MASK,
+ .enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+ .enable_mask = ARIZONA_CPMIC_ENA,
+ .bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
+ .bypass_mask = ARIZONA_CPMIC_BYPASS,
+
+ .linear_ranges = arizona_micsupp_ext_ranges,
+ .n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ext_ranges),
+
+ .enable_time = 3000,
+
+ .owner = THIS_MODULE,
+};
+
static const struct regulator_init_data arizona_micsupp_default = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
.num_consumer_supplies = 1,
};
+static const struct regulator_init_data arizona_micsupp_ext_default = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_BYPASS,
+ .min_uV = 900000,
+ .max_uV = 3300000,
+ },
+
+ .num_consumer_supplies = 1,
+};
+
static int arizona_micsupp_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+ const struct regulator_desc *desc;
struct regulator_config config = { };
struct arizona_micsupp *micsupp;
int ret;
* default init_data for it. This will be overridden with
* platform data if provided.
*/
- micsupp->init_data = arizona_micsupp_default;
+ switch (arizona->type) {
+ case WM5110:
+ desc = &arizona_micsupp_ext;
+ micsupp->init_data = arizona_micsupp_ext_default;
+ break;
+ default:
+ desc = &arizona_micsupp;
+ micsupp->init_data = arizona_micsupp_default;
+ break;
+ }
+
micsupp->init_data.consumer_supplies = &micsupp->supply;
micsupp->supply.supply = "MICVDD";
micsupp->supply.dev_name = dev_name(arizona->dev);
ARIZONA_CPMIC_BYPASS, 0);
micsupp->regulator = devm_regulator_register(&pdev->dev,
- &arizona_micsupp,
+ desc,
&config);
if (IS_ERR(micsupp->regulator)) {
ret = PTR_ERR(micsupp->regulator);
struct regulator_ops *ops = rdev->desc->ops;
int ret;
+ if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector)
+ return rdev->desc->fixed_uV;
+
if (!ops->list_voltage || selector >= rdev->desc->n_voltages)
return -EINVAL;
struct property *prop;
const char *regtype;
int proplen, gpio, i;
+ int ret;
config = devm_kzalloc(dev,
sizeof(struct gpio_regulator_config),
}
config->nr_states = i;
- of_property_read_string(np, "regulator-type", ®type);
+ ret = of_property_read_string(np, "regulator-type", ®type);
+ if (ret < 0) {
+ dev_err(dev, "Missing 'regulator-type' property\n");
+ return ERR_PTR(-EINVAL);
+ }
if (!strncmp("voltage", regtype, 7))
config->type = REGULATOR_VOLTAGE;
if (ret)
return ret;
- if (value & 0x0f) {
- dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
- return -ENODEV;
+ switch (value & 0x0f) {
+ /* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */
+ case 0x8:
+ dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
+ case 0x0:
+ break;
+ default:
+ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
+ return -ENODEV;
}
ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
fcx_multitrack = private->features.feature[40] & 0x20;
data_size = blk_rq_bytes(req);
+ if (data_size % blksize)
+ return ERR_PTR(-EINVAL);
/* tpm write request add CBC data on each track boundary */
if (rq_data_dir(req) == WRITE)
data_size += (last_trk - first_trk) * 4;
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = twa_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = twl_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = tw_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
#endif
.use_clustering = ENABLE_CLUSTERING,
.emulated = 1,
+ .no_write_same = 1,
};
static void __aac_shutdown(struct aac_dev * aac)
.cmd_per_lun = ARCMSR_MAX_CMD_PERLUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = arcmsr_host_attrs,
+ .no_write_same = 1,
};
static struct pci_device_id arcmsr_device_id_table[] = {
{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)},
struct bfa_fcs_lport_s *bfa_fcs_lookup_port(struct bfa_fcs_s *fcs,
u16 vf_id, wwn_t lpwwn);
+void bfa_fcs_lport_set_symname(struct bfa_fcs_lport_s *port, char *symname);
void bfa_fcs_lport_get_info(struct bfa_fcs_lport_s *port,
struct bfa_lport_info_s *port_info);
void bfa_fcs_lport_get_attr(struct bfa_fcs_lport_s *port,
bfa_sm_send_event(lport, BFA_FCS_PORT_SM_CREATE);
}
+void
+bfa_fcs_lport_set_symname(struct bfa_fcs_lport_s *port,
+ char *symname)
+{
+ strcpy(port->port_cfg.sym_name.symname, symname);
+
+ if (bfa_sm_cmp_state(port, bfa_fcs_lport_sm_online))
+ bfa_fcs_lport_ns_util_send_rspn_id(
+ BFA_FCS_GET_NS_FROM_PORT(port), NULL);
+}
+
/*
* fcs_lport_api
*/
u8 *psymbl = &symbl[0];
int len;
- if (!bfa_sm_cmp_state(port, bfa_fcs_lport_sm_online))
- return;
-
/* Avoid sending RSPN in the following states. */
if (bfa_sm_cmp_state(ns, bfa_fcs_lport_ns_sm_offline) ||
bfa_sm_cmp_state(ns, bfa_fcs_lport_ns_sm_plogi_sending) ||
return;
spin_lock_irqsave(&bfad->bfad_lock, flags);
- if (strlen(sym_name) > 0) {
- strcpy(fcs_vport->lport.port_cfg.sym_name.symname, sym_name);
- bfa_fcs_lport_ns_util_send_rspn_id(
- BFA_FCS_GET_NS_FROM_PORT((&fcs_vport->lport)), NULL);
- }
+ if (strlen(sym_name) > 0)
+ bfa_fcs_lport_set_symname(&fcs_vport->lport, sym_name);
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
}
.cmd_per_lun = GDTH_MAXC_P_L,
.unchecked_isa_dma = 1,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
};
#ifdef CONFIG_ISA
shost->use_clustering = sht->use_clustering;
shost->ordered_tag = sht->ordered_tag;
shost->eh_deadline = shost_eh_deadline * HZ;
+ shost->no_write_same = sht->no_write_same;
if (sht->supported_mode == MODE_UNKNOWN)
/* means we didn't set it ... default to INITIATOR */
.sdev_attrs = hpsa_sdev_attrs,
.shost_attrs = hpsa_shost_attrs,
.max_sectors = 8192,
+ .no_write_same = 1,
};
"has check condition: aborted command: "
"ASC: 0x%x, ASCQ: 0x%x\n",
cp, asc, ascq);
- cmd->result = DID_SOFT_ERROR << 16;
+ cmd->result |= DID_SOFT_ERROR << 16;
break;
}
/* Must be some other type of check condition */
hpsa_hba_inquiry(h);
hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
start_controller_lockup_detector(h);
- return 1;
+ return 0;
clean4:
hpsa_free_sg_chain_blocks(h);
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = ipr_ioa_attrs,
.sdev_attrs = ipr_dev_attrs,
- .proc_name = IPR_NAME
+ .proc_name = IPR_NAME,
+ .no_write_same = 1,
};
/**
.sg_tablesize = IPS_MAX_SG,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
};
qc->tf.nsect = 0;
}
- ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis);
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis);
task->uldd_task = qc;
if (ata_is_atapi(qc->tf.protocol)) {
memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
.eh_device_reset_handler = megaraid_reset,
.eh_bus_reset_handler = megaraid_reset,
.eh_host_reset_handler = megaraid_reset,
+ .no_write_same = 1,
};
static int
.eh_host_reset_handler = megaraid_reset_handler,
.change_queue_depth = megaraid_change_queue_depth,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
.sdev_attrs = megaraid_sdev_attrs,
.shost_attrs = megaraid_shost_attrs,
};
.bios_param = megasas_bios_param,
.use_clustering = ENABLE_CLUSTERING,
.change_queue_depth = megasas_change_queue_depth,
+ .no_write_same = 1,
};
/**
unsigned long flags;
u8 deviceType = pPayload->sas_identify.dev_type;
port->port_state = portstate;
+ phy->phy_state = PHY_STATE_LINK_UP_SPC;
PM8001_MSG_DBG(pm8001_ha,
pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n",
port_id, phy_id));
pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d,"
" phy id = %d\n", port_id, phy_id));
port->port_state = portstate;
+ phy->phy_state = PHY_STATE_LINK_UP_SPC;
port->port_attached = 1;
pm8001_get_lrate_mode(phy, link_rate);
phy->phy_type |= PORT_TYPE_SATA;
#define LINKRATE_30 (0x02 << 8)
#define LINKRATE_60 (0x04 << 8)
+/* for phy state */
+
+#define PHY_STATE_LINK_UP_SPC 0x1
+
/* for new SPC controllers MEMBASE III is shared between BIOS and DATA */
#define GSM_SM_BASE 0x4F0000
struct mpi_msg_hdr{
static void pm8001_tasklet(unsigned long opaque)
{
struct pm8001_hba_info *pm8001_ha;
- u32 vec;
- pm8001_ha = (struct pm8001_hba_info *)opaque;
+ struct isr_param *irq_vector;
+
+ irq_vector = (struct isr_param *)opaque;
+ pm8001_ha = irq_vector->drv_inst;
if (unlikely(!pm8001_ha))
BUG_ON(1);
- vec = pm8001_ha->int_vector;
- PM8001_CHIP_DISP->isr(pm8001_ha, vec);
+ PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
}
#endif
-static struct pm8001_hba_info *outq_to_hba(u8 *outq)
-{
- return container_of((outq - *outq), struct pm8001_hba_info, outq[0]);
-}
-
/**
* pm8001_interrupt_handler_msix - main MSIX interrupt handler.
* It obtains the vector number and calls the equivalent bottom
*/
static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
{
- struct pm8001_hba_info *pm8001_ha = outq_to_hba(opaque);
- u8 outq = *(u8 *)opaque;
+ struct isr_param *irq_vector;
+ struct pm8001_hba_info *pm8001_ha;
irqreturn_t ret = IRQ_HANDLED;
+ irq_vector = (struct isr_param *)opaque;
+ pm8001_ha = irq_vector->drv_inst;
+
if (unlikely(!pm8001_ha))
return IRQ_NONE;
if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
return IRQ_NONE;
- pm8001_ha->int_vector = outq;
#ifdef PM8001_USE_TASKLET
- tasklet_schedule(&pm8001_ha->tasklet);
+ tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
#else
- ret = PM8001_CHIP_DISP->isr(pm8001_ha, outq);
+ ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
#endif
return ret;
}
if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
return IRQ_NONE;
- pm8001_ha->int_vector = 0;
#ifdef PM8001_USE_TASKLET
- tasklet_schedule(&pm8001_ha->tasklet);
+ tasklet_schedule(&pm8001_ha->tasklet[0]);
#else
ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
#endif
{
struct pm8001_hba_info *pm8001_ha;
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
-
+ int j;
pm8001_ha = sha->lldd_ha;
if (!pm8001_ha)
pm8001_ha->iomb_size = IOMB_SIZE_SPC;
#ifdef PM8001_USE_TASKLET
- /**
- * default tasklet for non msi-x interrupt handler/first msi-x
- * interrupt handler
- **/
- tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
- (unsigned long)pm8001_ha);
+ /* Tasklet for non msi-x interrupt handler */
+ if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[0]));
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[j]));
#endif
pm8001_ioremap(pm8001_ha);
if (!pm8001_alloc(pm8001_ha, ent))
"pci_enable_msix request ret:%d no of intr %d\n",
rc, pm8001_ha->number_of_intr));
- for (i = 0; i < number_of_intr; i++)
- pm8001_ha->outq[i] = i;
for (i = 0; i < number_of_intr; i++) {
snprintf(intr_drvname[i], sizeof(intr_drvname[0]),
DRV_NAME"%d", i);
+ pm8001_ha->irq_vector[i].irq_id = i;
+ pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
+
if (request_irq(pm8001_ha->msix_entries[i].vector,
pm8001_interrupt_handler_msix, flag,
- intr_drvname[i], &pm8001_ha->outq[i])) {
+ intr_drvname[i], &(pm8001_ha->irq_vector[i]))) {
for (j = 0; j < i; j++)
free_irq(
pm8001_ha->msix_entries[j].vector,
- &pm8001_ha->outq[j]);
+ &(pm8001_ha->irq_vector[i]));
pci_disable_msix(pm8001_ha->pdev);
break;
}
{
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
- int i;
+ int i, j;
pm8001_ha = sha->lldd_ha;
sas_unregister_ha(sha);
sas_remove_host(pm8001_ha->shost);
synchronize_irq(pm8001_ha->msix_entries[i].vector);
for (i = 0; i < pm8001_ha->number_of_intr; i++)
free_irq(pm8001_ha->msix_entries[i].vector,
- &pm8001_ha->outq[i]);
+ &(pm8001_ha->irq_vector[i]));
pci_disable_msix(pdev);
#else
free_irq(pm8001_ha->irq, sha);
#endif
#ifdef PM8001_USE_TASKLET
- tasklet_kill(&pm8001_ha->tasklet);
+ /* For non-msix and msix interrupts */
+ if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ tasklet_kill(&pm8001_ha->tasklet[0]);
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_kill(&pm8001_ha->tasklet[j]);
#endif
pm8001_free(pm8001_ha);
kfree(sha->sas_phy);
{
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
- int i;
+ int i, j;
u32 device_state;
pm8001_ha = sha->lldd_ha;
flush_workqueue(pm8001_wq);
synchronize_irq(pm8001_ha->msix_entries[i].vector);
for (i = 0; i < pm8001_ha->number_of_intr; i++)
free_irq(pm8001_ha->msix_entries[i].vector,
- &pm8001_ha->outq[i]);
+ &(pm8001_ha->irq_vector[i]));
pci_disable_msix(pdev);
#else
free_irq(pm8001_ha->irq, sha);
#endif
#ifdef PM8001_USE_TASKLET
- tasklet_kill(&pm8001_ha->tasklet);
+ /* For non-msix and msix interrupts */
+ if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ tasklet_kill(&pm8001_ha->tasklet[0]);
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_kill(&pm8001_ha->tasklet[j]);
#endif
device_state = pci_choose_state(pdev, state);
pm8001_printk("pdev=0x%p, slot=%s, entering "
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
int rc;
- u8 i = 0;
+ u8 i = 0, j;
u32 device_state;
pm8001_ha = sha->lldd_ha;
device_state = pdev->current_state;
if (rc)
goto err_out_disable;
#ifdef PM8001_USE_TASKLET
- /* default tasklet for non msi-x interrupt handler/first msi-x
- * interrupt handler */
- tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
- (unsigned long)pm8001_ha);
+ /* Tasklet for non msi-x interrupt handler */
+ if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+ tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[0]));
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[j]));
#endif
PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
if (pm8001_ha->chip_id != chip_8001) {
MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
+MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
MODULE_DESCRIPTION(
"PMC-Sierra PM8001/8081/8088/8089/8074/8076/8077 "
"SAS/SATA controller driver");
struct pm8001_tmf_task tmf_task;
struct pm8001_device *pm8001_dev = dev->lldd_dev;
struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+ DECLARE_COMPLETION_ONSTACK(completion_setstate);
if (dev_is_sata(dev)) {
struct sas_phy *phy = sas_get_local_phy(dev);
rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
dev, 1, 0);
rc = sas_phy_reset(phy, 1);
sas_put_local_phy(phy);
+ pm8001_dev->setds_completion = &completion_setstate;
rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
pm8001_dev, 0x01);
- msleep(2000);
+ wait_for_completion(&completion_setstate);
} else {
tmf_task.tmf = TMF_LU_RESET;
rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
u64 membase;
u32 memsize;
};
+struct isr_param {
+ struct pm8001_hba_info *drv_inst;
+ u32 irq_id;
+};
struct pm8001_hba_info {
char name[PM8001_NAME_LENGTH];
struct list_head list;
int number_of_intr;/*will be used in remove()*/
#endif
#ifdef PM8001_USE_TASKLET
- struct tasklet_struct tasklet;
+ struct tasklet_struct tasklet[PM8001_MAX_MSIX_VEC];
#endif
u32 logging_level;
u32 fw_status;
u32 smp_exp_mode;
- u32 int_vector;
const struct firmware *fw_image;
- u8 outq[PM8001_MAX_MSIX_VEC];
+ struct isr_param irq_vector[PM8001_MAX_MSIX_VEC];
};
struct pm8001_work {
unsigned long flags;
u8 deviceType = pPayload->sas_identify.dev_type;
port->port_state = portstate;
+ phy->phy_state = PHY_STATE_LINK_UP_SPCV;
PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
"portid:%d; phyid:%d; linkrate:%d; "
"portstate:%x; devicetype:%x\n",
port_id, phy_id, link_rate, portstate));
port->port_state = portstate;
+ phy->phy_state = PHY_STATE_LINK_UP_SPCV;
port->port_attached = 1;
pm8001_get_lrate_mode(phy, link_rate);
phy->phy_type |= PORT_TYPE_SATA;
#define SAS_DOPNRJT_RTRY_TMO 128
#define SAS_COPNRJT_RTRY_TMO 128
+/* for phy state */
+#define PHY_STATE_LINK_UP_SPCV 0x2
/*
Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second.
Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128
};
#define PMCRAID_AEN_CMD_MAX (__PMCRAID_AEN_CMD_MAX - 1)
+static struct genl_multicast_group pmcraid_mcgrps[] = {
+ { .name = "events", /* not really used - see ID discussion below */ },
+};
+
static struct genl_family pmcraid_event_family = {
- .id = GENL_ID_GENERATE,
+ /*
+ * Due to prior multicast group abuse (the code having assumed that
+ * the family ID can be used as a multicast group ID) we need to
+ * statically allocate a family (and thus group) ID.
+ */
+ .id = GENL_ID_PMCRAID,
.name = "pmcraid",
.version = 1,
- .maxattr = PMCRAID_AEN_ATTR_MAX
+ .maxattr = PMCRAID_AEN_ATTR_MAX,
+ .mcgrps = pmcraid_mcgrps,
+ .n_mcgrps = ARRAY_SIZE(pmcraid_mcgrps),
};
/**
return result;
}
- result =
- genlmsg_multicast(&pmcraid_event_family, skb, 0,
- pmcraid_event_family.id, GFP_ATOMIC);
+ result = genlmsg_multicast(&pmcraid_event_family, skb,
+ 0, 0, GFP_ATOMIC);
/* If there are no listeners, genlmsg_multicast may return non-zero
* value.
.this_id = -1,
.sg_tablesize = PMCRAID_MAX_IOADLS,
.max_sectors = PMCRAID_IOA_MAX_SECTORS,
+ .no_write_same = 1,
.cmd_per_lun = PMCRAID_MAX_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = pmcraid_host_attrs,
{
struct scsi_device *sdev = sdkp->device;
+ if (sdev->host->no_write_same) {
+ sdev->no_write_same = 1;
+
+ return;
+ }
+
if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
/* too large values might cause issues with arcmsr */
int vpd_buf_len = 64;
.use_clustering = DISABLE_CLUSTERING,
/* Make sure we dont get a sg segment crosses a page boundary */
.dma_boundary = PAGE_SIZE-1,
+ .no_write_same = 1,
};
enum {
static int bcm2835_spi_remove(struct platform_device *pdev)
{
- struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
+ struct spi_master *master = platform_get_drvdata(pdev);
struct bcm2835_spi *bs = spi_master_get_devdata(master);
free_irq(bs->irq, master);
static int bcm63xx_spi_remove(struct platform_device *pdev)
{
- struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
+ struct spi_master *master = platform_get_drvdata(pdev);
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
/* reset spi block */
static int mpc512x_psc_spi_do_remove(struct device *dev)
{
- struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
+ struct spi_master *master = dev_get_drvdata(dev);
struct mpc512x_psc_spi *mps = spi_master_get_devdata(master);
clk_disable_unprepare(mps->clk_mclk);
struct mxs_spi *spi;
struct mxs_ssp *ssp;
- master = spi_master_get(platform_get_drvdata(pdev));
+ master = platform_get_drvdata(pdev);
spi = spi_master_get_devdata(master);
ssp = &spi->ssp;
static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
{ "INT33C0", 0 },
{ "INT33C1", 0 },
+ { "INT3430", 0 },
+ { "INT3431", 0 },
{ "80860F0E", 0 },
{ },
};
/* Enable the SSP clock */
clk_prepare_enable(ssp->clk);
+ /* Restore LPSS private register bits */
+ lpss_ssp_setup(drv_data);
+
/* Start the queue running */
status = spi_master_resume(drv_data->master);
if (status != 0) {
static int rspi_remove(struct platform_device *pdev)
{
- struct rspi_data *rspi = spi_master_get(platform_get_drvdata(pdev));
+ struct rspi_data *rspi = platform_get_drvdata(pdev);
spi_unregister_master(rspi->master);
rspi_release_dma(rspi);
free_irq(platform_get_irq(pdev, 0), rspi);
clk_put(rspi->clk);
iounmap(rspi->addr);
- spi_master_put(rspi->master);
return 0;
}
qspi->spi_max_frequency, clk_div);
ret = pm_runtime_get_sync(qspi->dev);
- if (ret) {
+ if (ret < 0) {
dev_err(qspi->dev, "pm_runtime_get_sync() failed\n");
return ret;
}
if (!of_property_read_u32(np, "num-cs", &num_cs))
master->num_chipselect = num_cs;
- platform_set_drvdata(pdev, master);
-
qspi = spi_master_get_devdata(master);
qspi->master = master;
qspi->dev = &pdev->dev;
+ platform_set_drvdata(pdev, qspi);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
static int ti_qspi_remove(struct platform_device *pdev)
{
- struct ti_qspi *qspi = platform_get_drvdata(pdev);
+ struct spi_master *master;
+ struct ti_qspi *qspi;
+ int ret;
+
+ master = platform_get_drvdata(pdev);
+ qspi = spi_master_get_devdata(master);
+
+ ret = pm_runtime_get_sync(qspi->dev);
+ if (ret < 0) {
+ dev_err(qspi->dev, "pm_runtime_get_sync() failed\n");
+ return ret;
+ }
ti_qspi_write(qspi, QSPI_WC_INT_DISABLE, QSPI_INTR_ENABLE_CLEAR_REG);
+ pm_runtime_put(qspi->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ spi_unregister_master(master);
+
return 0;
}
static int txx9spi_remove(struct platform_device *dev)
{
- struct spi_master *master = spi_master_get(platform_get_drvdata(dev));
+ struct spi_master *master = platform_get_drvdata(dev);
struct txx9spi *c = spi_master_get_devdata(master);
destroy_workqueue(c->workqueue);
return -ENOMEM;
ret = spi_register_master(master);
- if (ret != 0) {
+ if (!ret) {
*ptr = master;
devres_add(dev, ptr);
} else {
kfree_skb(skb);
}
-static int btmtk_usb_send_frame(struct sk_buff *skb)
+static int btmtk_usb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
- struct hci_dev *hdev = (struct hci_dev *)skb->dev;
struct btmtk_usb_data *data = hci_get_drvdata(hdev);
struct usb_ctrlrequest *dr;
struct urb *urb;
if (mask) {
if (mask & 0x00ff)
outb(s->state & 0xff, dev->iobase + reg);
- if ((mask & 0xff00) & (s->n_chan > 8))
+ if ((mask & 0xff00) && (s->n_chan > 8))
outb((s->state >> 8) & 0xff, dev->iobase + reg + 1);
- if ((mask & 0xff0000) & (s->n_chan > 16))
+ if ((mask & 0xff0000) && (s->n_chan > 16))
outb((s->state >> 16) & 0xff, dev->iobase + reg + 2);
- if ((mask & 0xff000000) & (s->n_chan > 24))
+ if ((mask & 0xff000000) && (s->n_chan > 24))
outb((s->state >> 24) & 0xff, dev->iobase + reg + 3);
}
* Private helper function: Write setpoint to an application DAC channel.
*/
static void s626_set_dac(struct comedi_device *dev, uint16_t chan,
- unsigned short dacdata)
+ int16_t dacdata)
{
struct s626_private *devpriv = dev->private;
uint16_t signmask;
unsigned char *rx_buf = devpriv->usb_rx_buf;
unsigned char *tx_buf = devpriv->usb_tx_buf;
int reg, cmd;
- int ret;
+ int ret = 0;
if (devpriv->model == VMK8061_MODEL) {
reg = VMK8061_DO_REG;
u8 **c_file, const u8 *endpoint, bool boot_case)
{
long word_length;
- int status;
+ int status = 0;
/*DEBUG("FT1000:REQUEST_CODE_SEGMENT\n");i*/
word_length = get_request_value(ft1000dev);
return status;
}
-
config SENSORS_HMC5843
tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
Say Y here to add support for the Honeywell HMC5843, HMC5883 and
HMC5883L 3-Axis Magnetometer (digital compass).
obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
obj-$(CONFIG_DRM_IMX_FB_HELPER) += imx-fbdev.o
obj-$(CONFIG_DRM_IMX_IPUV3_CORE) += ipu-v3/
-obj-$(CONFIG_DRM_IMX_IPUV3) += ipuv3-crtc.o ipuv3-plane.o
+
+imx-ipuv3-crtc-objs := ipuv3-crtc.o ipuv3-plane.o
+obj-$(CONFIG_DRM_IMX_IPUV3) += imx-ipuv3-crtc.o
{
return crtc->pipe;
}
+EXPORT_SYMBOL_GPL(imx_drm_crtc_id);
static void imx_drm_driver_lastclose(struct drm_device *drm)
{
struct l_wait_info lwi = { 0 };
int rc = 0;
- if (!thread_is_init(&pinger_thread) &&
- !thread_is_stopped(&pinger_thread))
+ if (thread_is_init(&pinger_thread) ||
+ thread_is_stopped(&pinger_thread))
return -EALREADY;
ptlrpc_pinger_remove_timeouts();
* Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
if (usb->board->flags & GO7007_USB_EZUSB) {
/* Reset buffer in EZ-USB */
- dev_dbg(go->dev, "resetting EZ-USB buffers\n");
+ pr_debug("resetting EZ-USB buffers\n");
if (go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0 ||
go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0)
return -1;
u16 status_reg = 0;
int timeout = 500;
- dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data);
+ pr_debug("WriteInterrupt: %04x %04x\n", addr, data);
for (i = 0; i < 100; ++i) {
r = usb_control_msg(usb->usbdev,
int r;
int timeout = 500;
- dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data);
+ pr_debug("WriteInterrupt: %04x %04x\n", addr, data);
go->usb_buf[0] = data & 0xff;
go->usb_buf[1] = data >> 8;
go->interrupt_available = 1;
go->interrupt_data = __le16_to_cpu(regs[0]);
go->interrupt_value = __le16_to_cpu(regs[1]);
- dev_dbg(go->dev, "ReadInterrupt: %04x %04x\n",
+ pr_debug("ReadInterrupt: %04x %04x\n",
go->interrupt_value, go->interrupt_data);
}
int transferred, pipe;
int timeout = 500;
- dev_dbg(go->dev, "DownloadBuffer sending %d bytes\n", len);
+ pr_debug("DownloadBuffer sending %d bytes\n", len);
if (usb->board->flags & GO7007_USB_EZUSB)
pipe = usb_sndbulkpipe(usb->usbdev, 2);
!(msgs[i].flags & I2C_M_RD) &&
(msgs[i + 1].flags & I2C_M_RD)) {
#ifdef GO7007_I2C_DEBUG
- dev_dbg(go->dev, "i2c write/read %d/%d bytes on %02x\n",
+ pr_debug("i2c write/read %d/%d bytes on %02x\n",
msgs[i].len, msgs[i + 1].len, msgs[i].addr);
#endif
buf[0] = 0x01;
buf[buf_len++] = msgs[++i].len;
} else if (msgs[i].flags & I2C_M_RD) {
#ifdef GO7007_I2C_DEBUG
- dev_dbg(go->dev, "i2c read %d bytes on %02x\n",
+ pr_debug("i2c read %d bytes on %02x\n",
msgs[i].len, msgs[i].addr);
#endif
buf[0] = 0x01;
buf_len = 4;
} else {
#ifdef GO7007_I2C_DEBUG
- dev_dbg(go->dev, "i2c write %d bytes on %02x\n",
+ pr_debug("i2c write %d bytes on %02x\n",
msgs[i].len, msgs[i].addr);
#endif
buf[0] = 0x00;
char *name;
int video_pipe, i, v_urb_len;
- dev_dbg(go->dev, "probing new GO7007 USB board\n");
+ pr_debug("probing new GO7007 USB board\n");
switch (id->driver_info) {
case GO7007_BOARDID_MATRIX_II:
board = &board_px_tv402u;
break;
case GO7007_BOARDID_LIFEVIEW_LR192:
- dev_err(go->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n");
+ dev_err(&intf->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n");
return -ENODEV;
name = "Lifeview TV Walker Ultra";
board = &board_lifeview_lr192;
break;
case GO7007_BOARDID_SENSORAY_2250:
- dev_info(go->dev, "Sensoray 2250 found\n");
+ dev_info(&intf->dev, "Sensoray 2250 found\n");
name = "Sensoray 2250/2251";
board = &board_sensoray_2250;
break;
board = &board_ads_usbav_709;
break;
default:
- dev_err(go->dev, "unknown board ID %d!\n",
+ dev_err(&intf->dev, "unknown board ID %d!\n",
(unsigned int)id->driver_info);
return -ENODEV;
}
sizeof(go->name));
break;
default:
- dev_dbg(go->dev, "unable to detect tuner type!\n");
+ pr_debug("unable to detect tuner type!\n");
break;
}
/* Configure tuner mode selection inputs connected
dev_err(nvec->dev,
"RX buffer overflow on %p: "
"Trying to write byte %u of %u\n",
- nvec->rx, nvec->rx->pos, NVEC_MSG_SIZE);
+ nvec->rx, nvec->rx ? nvec->rx->pos : 0,
+ NVEC_MSG_SIZE);
break;
default:
nvec->state = 0;
return _FAIL;
}
+ /* fix bug of flush_cam_entry at STOP AP mode */
+ psta->state |= WIFI_AP_STATE;
+ rtw_indicate_connect(padapter);
pmlmepriv->cur_network.join_res = true;/* for check if already set beacon */
return ret;
}
menuconfig TIDSPBRIDGE
tristate "DSP Bridge driver"
- depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM
+ depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM && BROKEN
select MAILBOX
select OMAP2PLUS_MBOX
help
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
pDevice->dev->name, pDevice->apdev->name);
}
- free_netdev(pDevice->apdev);
+ if (pDevice->apdev)
+ free_netdev(pDevice->apdev);
pDevice->apdev = NULL;
pDevice->bEnable8021x = false;
pDevice->bEnableHostWEP = false;
u8 * pbyAgc;
u16 wLengthAgc;
u8 abyArray[256];
+ u8 data;
ntStatus = CONTROLnsRequestIn(pDevice,
MESSAGE_TYPE_READ,
ControlvWriteByte(pDevice,MESSAGE_REQUEST_BBREG,0x0D,0x01);
RFbRFTableDownload(pDevice);
+
+ /* Fix for TX USB resets from vendors driver */
+ CONTROLnsRequestIn(pDevice, MESSAGE_TYPE_READ, USB_REG4,
+ MESSAGE_REQUEST_MEM, sizeof(data), &data);
+
+ data |= 0x2;
+
+ CONTROLnsRequestOut(pDevice, MESSAGE_TYPE_WRITE, USB_REG4,
+ MESSAGE_REQUEST_MEM, sizeof(data), &data);
+
return true;//ntStatus;
}
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
pDevice->dev->name, pDevice->apdev->name);
}
- free_netdev(pDevice->apdev);
+ if (pDevice->apdev)
+ free_netdev(pDevice->apdev);
pDevice->apdev = NULL;
pDevice->bEnable8021x = false;
pDevice->bEnableHostWEP = false;
#define VIAUSB20_PACKET_HEADER 0x04
+#define USB_REG4 0x604
+
typedef struct _CMD_MESSAGE
{
u8 byData[256];
return -ENOMEM;
/* Do not reset an active device! */
- if (bdev->bd_holders)
- return -EBUSY;
+ if (bdev->bd_holders) {
+ ret = -EBUSY;
+ goto out;
+ }
ret = kstrtou16(buf, 10, &do_reset);
if (ret)
- return ret;
+ goto out;
- if (!do_reset)
- return -EINVAL;
+ if (!do_reset) {
+ ret = -EINVAL;
+ goto out;
+ }
/* Make sure all pending I/O is finished */
fsync_bdev(bdev);
+ bdput(bdev);
zram_reset_device(zram, true);
return len;
+
+out:
+ bdput(bdev);
+ return ret;
}
static void __zram_make_request(struct zram *zram, struct bio *bio, int rw)
return next;
}
-/* Encode <page, obj_idx> as a single handle value */
+/*
+ * Encode <page, obj_idx> as a single handle value.
+ * On hardware platforms with physical memory starting at 0x0 the pfn
+ * could be 0 so we ensure that the handle will never be 0 by adjusting the
+ * encoded obj_idx value before encoding.
+ */
static void *obj_location_to_handle(struct page *page, unsigned long obj_idx)
{
unsigned long handle;
}
handle = page_to_pfn(page) << OBJ_INDEX_BITS;
- handle |= (obj_idx & OBJ_INDEX_MASK);
+ handle |= ((obj_idx + 1) & OBJ_INDEX_MASK);
return (void *)handle;
}
-/* Decode <page, obj_idx> pair from the given object handle */
+/*
+ * Decode <page, obj_idx> pair from the given object handle. We adjust the
+ * decoded obj_idx back to its original value since it was adjusted in
+ * obj_location_to_handle().
+ */
static void obj_handle_to_location(unsigned long handle, struct page **page,
unsigned long *obj_idx)
{
*page = pfn_to_page(handle >> OBJ_INDEX_BITS);
- *obj_idx = handle & OBJ_INDEX_MASK;
+ *obj_idx = (handle & OBJ_INDEX_MASK) - 1;
}
static unsigned long obj_idx_to_offset(struct page *page,
*/
static int __init amiserial_console_init(void)
{
+ if (!MACH_IS_AMIGA)
+ return -ENODEV;
+
register_console(&sercons);
return 0;
}
* data at the tail to prevent a subsequent overrun */
while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) {
if (echo_buf(ldata, tail) == ECHO_OP_START) {
- if (echo_buf(ldata, tail) == ECHO_OP_ERASE_TAB)
+ if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB)
tail += 3;
else
tail += 2;
found = 1;
size = N_TTY_BUF_SIZE - tail;
- n = (found + eol + size) & (N_TTY_BUF_SIZE - 1);
+ n = eol - tail;
+ if (n > 4096)
+ n += 4096;
+ n += found;
c = n;
if (found && read_buf(ldata, eol) == __DISABLED_CHAR) {
if (time)
timeout = time;
}
- mutex_unlock(&ldata->atomic_read_lock);
- remove_wait_queue(&tty->read_wait, &wait);
+ n_tty_set_room(tty);
+ up_read(&tty->termios_rwsem);
+ remove_wait_queue(&tty->read_wait, &wait);
if (!waitqueue_active(&tty->read_wait))
ldata->minimum_to_wake = minimum;
+ mutex_unlock(&ldata->atomic_read_lock);
+
__set_current_state(TASK_RUNNING);
if (b - buf)
retval = b - buf;
- n_tty_set_room(tty);
- up_read(&tty->termios_rwsem);
return retval;
}
accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
8250.nr_uarts=4. We now renamed the module back to 8250, but if
anybody noticed in 3.7 and changed their userspace we still have to
- keep the 8350_core.* options around until they revert the changes
+ keep the 8250_core.* options around until they revert the changes
they already did.
If 8250 is built as a module, this adds 8250_core alias instead.
/* Probe ports */
pmz_probe();
+ if (pmz_ports_count == 0)
+ return -ENODEV;
+
/* TODO: Autoprobe console based on OF */
/* pmz_console.index = i; */
register_console(&pmz_console);
filp->f_op = &tty_fops;
goto retry_open;
}
+ clear_bit(TTY_HUPPED, &tty->flags);
tty_unlock(tty);
return -EINVAL;
mem = idev->info->mem + mi;
+ if (mem->addr & ~PAGE_MASK)
+ return -ENODEV;
if (vma->vm_end - vma->vm_start > mem->size)
return -EINVAL;
/* terminator */
}
};
+MODULE_DEVICE_TABLE(platform, atmel_lcdfb_devtypes);
static struct atmel_lcdfb_config *
atmel_lcdfb_get_config(struct platform_device *pdev)
return -EINVAL;
}
case KYRO_IOCTL_UVSTRIDE:
- if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(unsigned long)))
+ if (copy_to_user(argp, &deviceInfo.ulOverlayUVStride, sizeof(deviceInfo.ulOverlayUVStride)))
return -EFAULT;
break;
case KYRO_IOCTL_STRIDE:
- if (copy_to_user(argp, &deviceInfo.ulOverlayStride, sizeof(unsigned long)))
+ if (copy_to_user(argp, &deviceInfo.ulOverlayStride, sizeof(deviceInfo.ulOverlayStride)))
return -EFAULT;
break;
case KYRO_IOCTL_OVERLAY_OFFSET:
- if (copy_to_user(argp, &deviceInfo.ulOverlayOffset, sizeof(unsigned long)))
+ if (copy_to_user(argp, &deviceInfo.ulOverlayOffset, sizeof(deviceInfo.ulOverlayOffset)))
return -EFAULT;
break;
}
struct omap_dss_device *in = ddata->in;
int r;
+ mutex_lock(&ddata->mutex);
+
dev_dbg(&ddata->spi->dev, "%s\n", __func__);
in->ops.sdi->set_timings(in, &ddata->videomode);
if (omapdss_device_is_enabled(dssdev))
return 0;
- mutex_lock(&ddata->mutex);
r = acx565akm_panel_power_on(dssdev);
- mutex_unlock(&ddata->mutex);
-
if (r)
return r;
* Power management
*/
+#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
static int sh_mobile_meram_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
meram_write_reg(priv->base, common_regs[i], priv->regs[i]);
return 0;
}
+#endif /* CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME */
static UNIVERSAL_DEV_PM_OPS(sh_mobile_meram_dev_pm_ops,
sh_mobile_meram_suspend,
+ sizeof(u32) * 16, GFP_KERNEL);
if (!fbi) {
dev_err(&pdev->dev, "Failed to initialize framebuffer device\n");
- ret = -ENOMEM;
- goto failed;
+ return -ENOMEM;
}
strcpy(fbi->fb.fix.id, "VT8500 LCD");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "no I/O memory resource defined\n");
- ret = -ENODEV;
- goto failed_fbi;
+ return -ENODEV;
}
res = request_mem_region(res->start, resource_size(res), "vt8500lcd");
if (res == NULL) {
dev_err(&pdev->dev, "failed to request I/O memory\n");
- ret = -EBUSY;
- goto failed_fbi;
+ return -EBUSY;
}
fbi->regbase = ioremap(res->start, resource_size(res));
}
disp_timing = of_get_display_timings(pdev->dev.of_node);
- if (!disp_timing)
- return -EINVAL;
+ if (!disp_timing) {
+ ret = -EINVAL;
+ goto failed_free_io;
+ }
ret = of_get_fb_videomode(pdev->dev.of_node, &of_mode,
OF_USE_NATIVE_MODE);
if (ret)
- return ret;
+ goto failed_free_io;
ret = of_property_read_u32(pdev->dev.of_node, "bits-per-pixel", &bpp);
if (ret)
- return ret;
+ goto failed_free_io;
/* try allocating the framebuffer */
fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
GFP_KERNEL);
if (!fb_mem_virt) {
pr_err("%s: Failed to allocate framebuffer\n", __func__);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto failed_free_io;
}
fbi->fb.fix.smem_start = fb_mem_phys;
iounmap(fbi->regbase);
failed_free_res:
release_mem_region(res->start, resource_size(res));
-failed_fbi:
- kfree(fbi);
-failed:
return ret;
}
ret = m2p_add_override(mfn, pages[i], kmap_ops ?
&kmap_ops[i] : NULL);
if (ret)
- return ret;
+ goto out;
}
+ out:
if (lazy)
arch_leave_lazy_mmu_mode();
ret = m2p_remove_override(pages[i], kmap_ops ?
&kmap_ops[i] : NULL);
if (ret)
- return ret;
+ goto out;
}
+ out:
if (lazy)
arch_leave_lazy_mmu_mode();
sg_dma_len(sgl) = 0;
return 0;
}
+ xen_dma_map_page(hwdev, pfn_to_page(map >> PAGE_SHIFT),
+ map & ~PAGE_MASK,
+ sg->length,
+ dir,
+ attrs);
sg->dma_address = xen_phys_to_bus(map);
} else {
/* we are not interested in the dma_addr returned by
Version 3.11
------------
-- Converted to use 2.3.x page cache [Dave Jones <dave@powertweak.com>]
+- Converted to use 2.3.x page cache [Dave Jones]
- Corruption in truncate() bugfix [Ken Tyler <kent@werple.net.au>]
Version 3.10
if (nr_pages > AIO_RING_PAGES) {
ctx->ring_pages = kcalloc(nr_pages, sizeof(struct page *),
GFP_KERNEL);
- if (!ctx->ring_pages)
+ if (!ctx->ring_pages) {
+ put_aio_ring_file(ctx);
return -ENOMEM;
+ }
}
ctx->mmap_size = nr_pages * PAGE_SIZE;
aio_nr + nr_events < aio_nr) {
spin_unlock(&aio_nr_lock);
err = -EAGAIN;
- goto err;
+ goto err_ctx;
}
aio_nr += ctx->max_reqs;
spin_unlock(&aio_nr_lock);
err_cleanup:
aio_nr_sub(ctx->max_reqs);
+err_ctx:
+ aio_free_ring(ctx);
err:
free_percpu(ctx->cpu);
free_percpu(ctx->reqs.pcpu_count);
static int btrfsic_read_block(struct btrfsic_state *state,
struct btrfsic_block_data_ctx *block_ctx);
static void btrfsic_dump_database(struct btrfsic_state *state);
-static void btrfsic_complete_bio_end_io(struct bio *bio, int err);
static int btrfsic_test_for_metadata(struct btrfsic_state *state,
char **datav, unsigned int num_pages);
static void btrfsic_process_written_block(struct btrfsic_dev_state *dev_state,
for (i = 0; i < num_pages;) {
struct bio *bio;
unsigned int j;
- DECLARE_COMPLETION_ONSTACK(complete);
bio = btrfs_io_bio_alloc(GFP_NOFS, num_pages - i);
if (!bio) {
}
bio->bi_bdev = block_ctx->dev->bdev;
bio->bi_sector = dev_bytenr >> 9;
- bio->bi_end_io = btrfsic_complete_bio_end_io;
- bio->bi_private = &complete;
for (j = i; j < num_pages; j++) {
ret = bio_add_page(bio, block_ctx->pagev[j],
"btrfsic: error, failed to add a single page!\n");
return -1;
}
- submit_bio(READ, bio);
-
- /* this will also unplug the queue */
- wait_for_completion(&complete);
-
- if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) {
+ if (submit_bio_wait(READ, bio)) {
printk(KERN_INFO
"btrfsic: read error at logical %llu dev %s!\n",
block_ctx->start, block_ctx->dev->name);
return block_ctx->len;
}
-static void btrfsic_complete_bio_end_io(struct bio *bio, int err)
-{
- complete((struct completion *)bio->bi_private);
-}
-
static void btrfsic_dump_database(struct btrfsic_state *state)
{
struct list_head *elem_all;
return submit_bh(rw, bh);
}
-void btrfsic_submit_bio(int rw, struct bio *bio)
+static void __btrfsic_submit_bio(int rw, struct bio *bio)
{
struct btrfsic_dev_state *dev_state;
- if (!btrfsic_is_initialized) {
- submit_bio(rw, bio);
+ if (!btrfsic_is_initialized)
return;
- }
mutex_lock(&btrfsic_mutex);
/* since btrfsic_submit_bio() is also called before
}
leave:
mutex_unlock(&btrfsic_mutex);
+}
+void btrfsic_submit_bio(int rw, struct bio *bio)
+{
+ __btrfsic_submit_bio(rw, bio);
submit_bio(rw, bio);
}
+int btrfsic_submit_bio_wait(int rw, struct bio *bio)
+{
+ __btrfsic_submit_bio(rw, bio);
+ return submit_bio_wait(rw, bio);
+}
+
int btrfsic_mount(struct btrfs_root *root,
struct btrfs_fs_devices *fs_devices,
int including_extent_data, u32 print_mask)
#ifdef CONFIG_BTRFS_FS_CHECK_INTEGRITY
int btrfsic_submit_bh(int rw, struct buffer_head *bh);
void btrfsic_submit_bio(int rw, struct bio *bio);
+int btrfsic_submit_bio_wait(int rw, struct bio *bio);
#else
#define btrfsic_submit_bh submit_bh
#define btrfsic_submit_bio submit_bio
+#define btrfsic_submit_bio_wait submit_bio_wait
#endif
int btrfsic_mount(struct btrfs_root *root,
return err;
}
-static void repair_io_failure_callback(struct bio *bio, int err)
-{
- complete(bio->bi_private);
-}
-
/*
* this bypasses the standard btrfs submit functions deliberately, as
* the standard behavior is to write all copies in a raid setup. here we only
{
struct bio *bio;
struct btrfs_device *dev;
- DECLARE_COMPLETION_ONSTACK(compl);
u64 map_length = 0;
u64 sector;
struct btrfs_bio *bbio = NULL;
bio = btrfs_io_bio_alloc(GFP_NOFS, 1);
if (!bio)
return -EIO;
- bio->bi_private = &compl;
- bio->bi_end_io = repair_io_failure_callback;
bio->bi_size = 0;
map_length = length;
}
bio->bi_bdev = dev->bdev;
bio_add_page(bio, page, length, start - page_offset(page));
- btrfsic_submit_bio(WRITE_SYNC, bio);
- wait_for_completion(&compl);
- if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) {
+ if (btrfsic_submit_bio_wait(WRITE_SYNC, bio)) {
/* try to remap that extent elsewhere? */
bio_put(bio);
btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS);
int is_metadata, int have_csum,
const u8 *csum, u64 generation,
u16 csum_size);
-static void scrub_complete_bio_end_io(struct bio *bio, int err);
static int scrub_repair_block_from_good_copy(struct scrub_block *sblock_bad,
struct scrub_block *sblock_good,
int force_write);
for (page_num = 0; page_num < sblock->page_count; page_num++) {
struct bio *bio;
struct scrub_page *page = sblock->pagev[page_num];
- DECLARE_COMPLETION_ONSTACK(complete);
if (page->dev->bdev == NULL) {
page->io_error = 1;
}
bio->bi_bdev = page->dev->bdev;
bio->bi_sector = page->physical >> 9;
- bio->bi_end_io = scrub_complete_bio_end_io;
- bio->bi_private = &complete;
bio_add_page(bio, page->page, PAGE_SIZE, 0);
- btrfsic_submit_bio(READ, bio);
-
- /* this will also unplug the queue */
- wait_for_completion(&complete);
-
- page->io_error = !test_bit(BIO_UPTODATE, &bio->bi_flags);
- if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
+ if (btrfsic_submit_bio_wait(READ, bio))
sblock->no_io_error_seen = 0;
+
bio_put(bio);
}
sblock->checksum_error = 1;
}
-static void scrub_complete_bio_end_io(struct bio *bio, int err)
-{
- complete((struct completion *)bio->bi_private);
-}
-
static int scrub_repair_block_from_good_copy(struct scrub_block *sblock_bad,
struct scrub_block *sblock_good,
int force_write)
sblock_bad->checksum_error || page_bad->io_error) {
struct bio *bio;
int ret;
- DECLARE_COMPLETION_ONSTACK(complete);
if (!page_bad->dev->bdev) {
printk_ratelimited(KERN_WARNING
return -EIO;
bio->bi_bdev = page_bad->dev->bdev;
bio->bi_sector = page_bad->physical >> 9;
- bio->bi_end_io = scrub_complete_bio_end_io;
- bio->bi_private = &complete;
ret = bio_add_page(bio, page_good->page, PAGE_SIZE, 0);
if (PAGE_SIZE != ret) {
bio_put(bio);
return -EIO;
}
- btrfsic_submit_bio(WRITE, bio);
- /* this will also unplug the queue */
- wait_for_completion(&complete);
- if (!bio_flagged(bio, BIO_UPTODATE)) {
+ if (btrfsic_submit_bio_wait(WRITE, bio)) {
btrfs_dev_stat_inc_and_print(page_bad->dev,
BTRFS_DEV_STAT_WRITE_ERRS);
btrfs_dev_replace_stats_inc(
struct bio *bio;
struct btrfs_device *dev;
int ret;
- DECLARE_COMPLETION_ONSTACK(compl);
dev = sctx->wr_ctx.tgtdev;
if (!dev)
spin_unlock(&sctx->stat_lock);
return -ENOMEM;
}
- bio->bi_private = &compl;
- bio->bi_end_io = scrub_complete_bio_end_io;
bio->bi_size = 0;
bio->bi_sector = physical_for_dev_replace >> 9;
bio->bi_bdev = dev->bdev;
btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS);
return -EIO;
}
- btrfsic_submit_bio(WRITE_SYNC, bio);
- wait_for_completion(&compl);
- if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
+ if (btrfsic_submit_bio_wait(WRITE_SYNC, bio))
goto leave_with_eio;
bio_put(bio);
}
SetPageUptodate(page);
- if (err == 0)
+ if (err >= 0)
ceph_readpage_to_fscache(inode, page);
out:
{
struct ceph_inode_info *ci = ceph_inode(inode);
+ if (!PageFsCache(page))
+ return;
+
fscache_wait_on_page_write(ci->fscache, page);
fscache_uncache_page(ci->fscache, page);
}
* caller should hold i_ceph_lock.
* caller will not hold session s_mutex if called from destroy_inode.
*/
-void __ceph_remove_cap(struct ceph_cap *cap)
+void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release)
{
struct ceph_mds_session *session = cap->session;
struct ceph_inode_info *ci = cap->ci;
/* remove from session list */
spin_lock(&session->s_cap_lock);
+ /*
+ * s_cap_reconnect is protected by s_cap_lock. no one changes
+ * s_cap_gen while session is in the reconnect state.
+ */
+ if (queue_release &&
+ (!session->s_cap_reconnect ||
+ cap->cap_gen == session->s_cap_gen))
+ __queue_cap_release(session, ci->i_vino.ino, cap->cap_id,
+ cap->mseq, cap->issue_seq);
+
if (session->s_cap_iterator == cap) {
/* not yet, we are iterating over this very cap */
dout("__ceph_remove_cap delaying %p removal from session %p\n",
struct ceph_mds_cap_release *head;
struct ceph_mds_cap_item *item;
- spin_lock(&session->s_cap_lock);
BUG_ON(!session->s_num_cap_releases);
msg = list_first_entry(&session->s_cap_releases,
struct ceph_msg, list_head);
(int)CEPH_CAPS_PER_RELEASE,
(int)msg->front.iov_len);
}
- spin_unlock(&session->s_cap_lock);
}
/*
p = rb_first(&ci->i_caps);
while (p) {
struct ceph_cap *cap = rb_entry(p, struct ceph_cap, ci_node);
- struct ceph_mds_session *session = cap->session;
-
- __queue_cap_release(session, ceph_ino(inode), cap->cap_id,
- cap->mseq, cap->issue_seq);
p = rb_next(p);
- __ceph_remove_cap(cap);
+ __ceph_remove_cap(cap, true);
}
}
}
spin_unlock(&mdsc->cap_dirty_lock);
}
- __ceph_remove_cap(cap);
+ __ceph_remove_cap(cap, false);
}
/* else, we already released it */
if (!inode) {
dout(" i don't have ino %llx\n", vino.ino);
- if (op == CEPH_CAP_OP_IMPORT)
+ if (op == CEPH_CAP_OP_IMPORT) {
+ spin_lock(&session->s_cap_lock);
__queue_cap_release(session, vino.ino, cap_id,
mseq, seq);
+ spin_unlock(&session->s_cap_lock);
+ }
goto flush_cap_releases;
}
}
/* note next offset and last dentry name */
+ rinfo = &req->r_reply_info;
+ if (le32_to_cpu(rinfo->dir_dir->frag) != frag) {
+ frag = le32_to_cpu(rinfo->dir_dir->frag);
+ if (ceph_frag_is_leftmost(frag))
+ fi->next_offset = 2;
+ else
+ fi->next_offset = 0;
+ off = fi->next_offset;
+ }
fi->offset = fi->next_offset;
fi->last_readdir = req;
+ fi->frag = frag;
if (req->r_reply_info.dir_end) {
kfree(fi->last_name);
else
fi->next_offset = 0;
} else {
- rinfo = &req->r_reply_info;
err = note_last_dentry(fi,
rinfo->dir_dname[rinfo->dir_nr-1],
rinfo->dir_dname_len[rinfo->dir_nr-1]);
int issued = 0, implemented;
struct timespec mtime, atime, ctime;
u32 nsplits;
+ struct ceph_inode_frag *frag;
+ struct rb_node *rb_node;
struct ceph_buffer *xattr_blob = NULL;
int err = 0;
int queue_trunc = 0;
/* FIXME: move me up, if/when version reflects fragtree changes */
nsplits = le32_to_cpu(info->fragtree.nsplits);
mutex_lock(&ci->i_fragtree_mutex);
+ rb_node = rb_first(&ci->i_fragtree);
for (i = 0; i < nsplits; i++) {
u32 id = le32_to_cpu(info->fragtree.splits[i].frag);
- struct ceph_inode_frag *frag = __get_or_create_frag(ci, id);
-
- if (IS_ERR(frag))
- continue;
+ frag = NULL;
+ while (rb_node) {
+ frag = rb_entry(rb_node, struct ceph_inode_frag, node);
+ if (ceph_frag_compare(frag->frag, id) >= 0) {
+ if (frag->frag != id)
+ frag = NULL;
+ else
+ rb_node = rb_next(rb_node);
+ break;
+ }
+ rb_node = rb_next(rb_node);
+ rb_erase(&frag->node, &ci->i_fragtree);
+ kfree(frag);
+ frag = NULL;
+ }
+ if (!frag) {
+ frag = __get_or_create_frag(ci, id);
+ if (IS_ERR(frag))
+ continue;
+ }
frag->split_by = le32_to_cpu(info->fragtree.splits[i].by);
dout(" frag %x split by %d\n", frag->frag, frag->split_by);
}
+ while (rb_node) {
+ frag = rb_entry(rb_node, struct ceph_inode_frag, node);
+ rb_node = rb_next(rb_node);
+ rb_erase(&frag->node, &ci->i_fragtree);
+ kfree(frag);
+ }
mutex_unlock(&ci->i_fragtree_mutex);
/* were we issued a capability? */
int err = 0, i;
struct inode *snapdir = NULL;
struct ceph_mds_request_head *rhead = req->r_request->front.iov_base;
- u64 frag = le32_to_cpu(rhead->args.readdir.frag);
struct ceph_dentry_info *di;
+ u64 r_readdir_offset = req->r_readdir_offset;
+ u32 frag = le32_to_cpu(rhead->args.readdir.frag);
+
+ if (rinfo->dir_dir &&
+ le32_to_cpu(rinfo->dir_dir->frag) != frag) {
+ dout("readdir_prepopulate got new frag %x -> %x\n",
+ frag, le32_to_cpu(rinfo->dir_dir->frag));
+ frag = le32_to_cpu(rinfo->dir_dir->frag);
+ if (ceph_frag_is_leftmost(frag))
+ r_readdir_offset = 2;
+ else
+ r_readdir_offset = 0;
+ }
if (req->r_aborted)
return readdir_prepopulate_inodes_only(req, session);
}
di = dn->d_fsdata;
- di->offset = ceph_make_fpos(frag, i + req->r_readdir_offset);
+ di->offset = ceph_make_fpos(frag, i + r_readdir_offset);
/* inode */
if (dn->d_inode) {
*/
struct ceph_reconnect_state {
+ int nr_caps;
struct ceph_pagelist *pagelist;
bool flock;
};
INIT_LIST_HEAD(&s->s_waiting);
INIT_LIST_HEAD(&s->s_unsafe);
s->s_num_cap_releases = 0;
+ s->s_cap_reconnect = 0;
s->s_cap_iterator = NULL;
INIT_LIST_HEAD(&s->s_cap_releases);
INIT_LIST_HEAD(&s->s_cap_releases_done);
req->r_unsafe_dir = NULL;
}
+ complete_all(&req->r_safe_completion);
+
ceph_mdsc_put_request(req);
}
dout("removing cap %p, ci is %p, inode is %p\n",
cap, ci, &ci->vfs_inode);
spin_lock(&ci->i_ceph_lock);
- __ceph_remove_cap(cap);
+ __ceph_remove_cap(cap, false);
if (!__ceph_is_any_real_caps(ci)) {
struct ceph_mds_client *mdsc =
ceph_sb_to_client(inode->i_sb)->mdsc;
session->s_trim_caps--;
if (oissued) {
/* we aren't the only cap.. just remove us */
- __queue_cap_release(session, ceph_ino(inode), cap->cap_id,
- cap->mseq, cap->issue_seq);
- __ceph_remove_cap(cap);
+ __ceph_remove_cap(cap, true);
} else {
/* try to drop referring dentries */
spin_unlock(&ci->i_ceph_lock);
unsigned num;
dout("discard_cap_releases mds%d\n", session->s_mds);
- spin_lock(&session->s_cap_lock);
/* zero out the in-progress message */
msg = list_first_entry(&session->s_cap_releases,
msg->front.iov_len = sizeof(*head);
list_add(&msg->list_head, &session->s_cap_releases);
}
-
- spin_unlock(&session->s_cap_lock);
}
/*
int mds = -1;
int err = -EAGAIN;
- if (req->r_err || req->r_got_result)
+ if (req->r_err || req->r_got_result) {
+ if (req->r_aborted)
+ __unregister_request(mdsc, req);
goto out;
+ }
if (req->r_timeout &&
time_after_eq(jiffies, req->r_started + req->r_timeout)) {
if (head->safe) {
req->r_got_safe = true;
__unregister_request(mdsc, req);
- complete_all(&req->r_safe_completion);
if (req->r_got_unsafe) {
/*
err = ceph_fill_trace(mdsc->fsc->sb, req, req->r_session);
if (err == 0) {
if (result == 0 && (req->r_op == CEPH_MDS_OP_READDIR ||
- req->r_op == CEPH_MDS_OP_LSSNAP) &&
- rinfo->dir_nr)
+ req->r_op == CEPH_MDS_OP_LSSNAP))
ceph_readdir_prepopulate(req, req->r_session);
ceph_unreserve_caps(mdsc, &req->r_caps_reservation);
}
cap->seq = 0; /* reset cap seq */
cap->issue_seq = 0; /* and issue_seq */
cap->mseq = 0; /* and migrate_seq */
+ cap->cap_gen = cap->session->s_cap_gen;
if (recon_state->flock) {
rec.v2.cap_id = cpu_to_le64(cap->cap_id);
} else {
err = ceph_pagelist_append(pagelist, &rec, reclen);
}
+
+ recon_state->nr_caps++;
out_free:
kfree(path);
out_dput:
struct rb_node *p;
int mds = session->s_mds;
int err = -ENOMEM;
+ int s_nr_caps;
struct ceph_pagelist *pagelist;
struct ceph_reconnect_state recon_state;
dout("session %p state %s\n", session,
session_state_name(session->s_state));
+ spin_lock(&session->s_gen_ttl_lock);
+ session->s_cap_gen++;
+ spin_unlock(&session->s_gen_ttl_lock);
+
+ spin_lock(&session->s_cap_lock);
+ /*
+ * notify __ceph_remove_cap() that we are composing cap reconnect.
+ * If a cap get released before being added to the cap reconnect,
+ * __ceph_remove_cap() should skip queuing cap release.
+ */
+ session->s_cap_reconnect = 1;
/* drop old cap expires; we're about to reestablish that state */
discard_cap_releases(mdsc, session);
+ spin_unlock(&session->s_cap_lock);
/* traverse this session's caps */
- err = ceph_pagelist_encode_32(pagelist, session->s_nr_caps);
+ s_nr_caps = session->s_nr_caps;
+ err = ceph_pagelist_encode_32(pagelist, s_nr_caps);
if (err)
goto fail;
+ recon_state.nr_caps = 0;
recon_state.pagelist = pagelist;
recon_state.flock = session->s_con.peer_features & CEPH_FEATURE_FLOCK;
err = iterate_session_caps(session, encode_caps_cb, &recon_state);
if (err < 0)
goto fail;
+ spin_lock(&session->s_cap_lock);
+ session->s_cap_reconnect = 0;
+ spin_unlock(&session->s_cap_lock);
+
/*
* snaprealms. we provide mds with the ino, seq (version), and
* parent for all of our realms. If the mds has any newer info,
if (recon_state.flock)
reply->hdr.version = cpu_to_le16(2);
- if (pagelist->length) {
- /* set up outbound data if we have any */
- reply->hdr.data_len = cpu_to_le32(pagelist->length);
- ceph_msg_data_add_pagelist(reply, pagelist);
+
+ /* raced with cap release? */
+ if (s_nr_caps != recon_state.nr_caps) {
+ struct page *page = list_first_entry(&pagelist->head,
+ struct page, lru);
+ __le32 *addr = kmap_atomic(page);
+ *addr = cpu_to_le32(recon_state.nr_caps);
+ kunmap_atomic(addr);
}
+
+ reply->hdr.data_len = cpu_to_le32(pagelist->length);
+ ceph_msg_data_add_pagelist(reply, pagelist);
ceph_con_send(&session->s_con, reply);
mutex_unlock(&session->s_mutex);
struct list_head s_caps; /* all caps issued by this session */
int s_nr_caps, s_trim_caps;
int s_num_cap_releases;
+ int s_cap_reconnect;
struct list_head s_cap_releases; /* waiting cap_release messages */
struct list_head s_cap_releases_done; /* ready to send */
struct ceph_cap *s_cap_iterator;
int fmode, unsigned issued, unsigned wanted,
unsigned cap, unsigned seq, u64 realmino, int flags,
struct ceph_cap_reservation *caps_reservation);
-extern void __ceph_remove_cap(struct ceph_cap *cap);
-static inline void ceph_remove_cap(struct ceph_cap *cap)
-{
- spin_lock(&cap->ci->i_ceph_lock);
- __ceph_remove_cap(cap);
- spin_unlock(&cap->ci->i_ceph_lock);
-}
+extern void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release);
extern void ceph_put_cap(struct ceph_mds_client *mdsc,
struct ceph_cap *cap);
int (*clone_range)(const unsigned int, struct cifsFileInfo *src_file,
struct cifsFileInfo *target_file, u64 src_off, u64 len,
u64 dest_off);
+ int (*validate_negotiate)(const unsigned int, struct cifs_tcon *);
};
struct smb_version_values {
#include <linux/mount.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
-#include <linux/btrfs.h>
#include "cifspdu.h"
#include "cifsglob.h"
#include "cifsproto.h"
#include "cifs_debug.h"
#include "cifsfs.h"
+#define CIFS_IOCTL_MAGIC 0xCF
+#define CIFS_IOC_COPYCHUNK_FILE _IOW(CIFS_IOCTL_MAGIC, 3, int)
+
static long cifs_ioctl_clone(unsigned int xid, struct file *dst_file,
unsigned long srcfd, u64 off, u64 len, u64 destoff)
{
cifs_dbg(FYI, "set compress flag rc %d\n", rc);
}
break;
- case BTRFS_IOC_CLONE:
+ case CIFS_IOC_COPYCHUNK_FILE:
rc = cifs_ioctl_clone(xid, filep, arg, 0, 0, 0);
break;
default:
int rc;
unsigned int ret_data_len;
struct copychunk_ioctl *pcchunk;
- char *retbuf = NULL;
+ struct copychunk_ioctl_rsp *retbuf = NULL;
+ struct cifs_tcon *tcon;
+ int chunks_copied = 0;
+ bool chunk_sizes_updated = false;
pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL);
/* Note: request_res_key sets res_key null only if rc !=0 */
if (rc)
- return rc;
+ goto cchunk_out;
/* For now array only one chunk long, will make more flexible later */
pcchunk->ChunkCount = __constant_cpu_to_le32(1);
pcchunk->Reserved = 0;
- pcchunk->SourceOffset = cpu_to_le64(src_off);
- pcchunk->TargetOffset = cpu_to_le64(dest_off);
- pcchunk->Length = cpu_to_le32(len);
pcchunk->Reserved2 = 0;
- /* Request that server copy to target from src file identified by key */
- rc = SMB2_ioctl(xid, tlink_tcon(trgtfile->tlink),
- trgtfile->fid.persistent_fid,
- trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE,
- true /* is_fsctl */, (char *)pcchunk,
- sizeof(struct copychunk_ioctl), &retbuf, &ret_data_len);
+ tcon = tlink_tcon(trgtfile->tlink);
- /* BB need to special case rc = EINVAL to alter chunk size */
+ while (len > 0) {
+ pcchunk->SourceOffset = cpu_to_le64(src_off);
+ pcchunk->TargetOffset = cpu_to_le64(dest_off);
+ pcchunk->Length =
+ cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk));
- cifs_dbg(FYI, "rc %d data length out %d\n", rc, ret_data_len);
+ /* Request server copy to target from src identified by key */
+ rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid,
+ trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE,
+ true /* is_fsctl */, (char *)pcchunk,
+ sizeof(struct copychunk_ioctl), (char **)&retbuf,
+ &ret_data_len);
+ if (rc == 0) {
+ if (ret_data_len !=
+ sizeof(struct copychunk_ioctl_rsp)) {
+ cifs_dbg(VFS, "invalid cchunk response size\n");
+ rc = -EIO;
+ goto cchunk_out;
+ }
+ if (retbuf->TotalBytesWritten == 0) {
+ cifs_dbg(FYI, "no bytes copied\n");
+ rc = -EIO;
+ goto cchunk_out;
+ }
+ /*
+ * Check if server claimed to write more than we asked
+ */
+ if (le32_to_cpu(retbuf->TotalBytesWritten) >
+ le32_to_cpu(pcchunk->Length)) {
+ cifs_dbg(VFS, "invalid copy chunk response\n");
+ rc = -EIO;
+ goto cchunk_out;
+ }
+ if (le32_to_cpu(retbuf->ChunksWritten) != 1) {
+ cifs_dbg(VFS, "invalid num chunks written\n");
+ rc = -EIO;
+ goto cchunk_out;
+ }
+ chunks_copied++;
+
+ src_off += le32_to_cpu(retbuf->TotalBytesWritten);
+ dest_off += le32_to_cpu(retbuf->TotalBytesWritten);
+ len -= le32_to_cpu(retbuf->TotalBytesWritten);
+
+ cifs_dbg(FYI, "Chunks %d PartialChunk %d Total %d\n",
+ le32_to_cpu(retbuf->ChunksWritten),
+ le32_to_cpu(retbuf->ChunkBytesWritten),
+ le32_to_cpu(retbuf->TotalBytesWritten));
+ } else if (rc == -EINVAL) {
+ if (ret_data_len != sizeof(struct copychunk_ioctl_rsp))
+ goto cchunk_out;
+
+ cifs_dbg(FYI, "MaxChunks %d BytesChunk %d MaxCopy %d\n",
+ le32_to_cpu(retbuf->ChunksWritten),
+ le32_to_cpu(retbuf->ChunkBytesWritten),
+ le32_to_cpu(retbuf->TotalBytesWritten));
+
+ /*
+ * Check if this is the first request using these sizes,
+ * (ie check if copy succeed once with original sizes
+ * and check if the server gave us different sizes after
+ * we already updated max sizes on previous request).
+ * if not then why is the server returning an error now
+ */
+ if ((chunks_copied != 0) || chunk_sizes_updated)
+ goto cchunk_out;
+
+ /* Check that server is not asking us to grow size */
+ if (le32_to_cpu(retbuf->ChunkBytesWritten) <
+ tcon->max_bytes_chunk)
+ tcon->max_bytes_chunk =
+ le32_to_cpu(retbuf->ChunkBytesWritten);
+ else
+ goto cchunk_out; /* server gave us bogus size */
+
+ /* No need to change MaxChunks since already set to 1 */
+ chunk_sizes_updated = true;
+ }
+ }
+cchunk_out:
kfree(pcchunk);
return rc;
}
.create_lease_buf = smb3_create_lease_buf,
.parse_lease_buf = smb3_parse_lease_buf,
.clone_range = smb2_clone_range,
+ .validate_negotiate = smb3_validate_negotiate,
};
struct smb_version_values smb20_values = {
return rc;
}
+int smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon)
+{
+ int rc = 0;
+ struct validate_negotiate_info_req vneg_inbuf;
+ struct validate_negotiate_info_rsp *pneg_rsp;
+ u32 rsplen;
+
+ cifs_dbg(FYI, "validate negotiate\n");
+
+ /*
+ * validation ioctl must be signed, so no point sending this if we
+ * can not sign it. We could eventually change this to selectively
+ * sign just this, the first and only signed request on a connection.
+ * This is good enough for now since a user who wants better security
+ * would also enable signing on the mount. Having validation of
+ * negotiate info for signed connections helps reduce attack vectors
+ */
+ if (tcon->ses->server->sign == false)
+ return 0; /* validation requires signing */
+
+ vneg_inbuf.Capabilities =
+ cpu_to_le32(tcon->ses->server->vals->req_capabilities);
+ memcpy(vneg_inbuf.Guid, cifs_client_guid, SMB2_CLIENT_GUID_SIZE);
+
+ if (tcon->ses->sign)
+ vneg_inbuf.SecurityMode =
+ cpu_to_le16(SMB2_NEGOTIATE_SIGNING_REQUIRED);
+ else if (global_secflags & CIFSSEC_MAY_SIGN)
+ vneg_inbuf.SecurityMode =
+ cpu_to_le16(SMB2_NEGOTIATE_SIGNING_ENABLED);
+ else
+ vneg_inbuf.SecurityMode = 0;
+
+ vneg_inbuf.DialectCount = cpu_to_le16(1);
+ vneg_inbuf.Dialects[0] =
+ cpu_to_le16(tcon->ses->server->vals->protocol_id);
+
+ rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID,
+ FSCTL_VALIDATE_NEGOTIATE_INFO, true /* is_fsctl */,
+ (char *)&vneg_inbuf, sizeof(struct validate_negotiate_info_req),
+ (char **)&pneg_rsp, &rsplen);
+
+ if (rc != 0) {
+ cifs_dbg(VFS, "validate protocol negotiate failed: %d\n", rc);
+ return -EIO;
+ }
+
+ if (rsplen != sizeof(struct validate_negotiate_info_rsp)) {
+ cifs_dbg(VFS, "invalid size of protocol negotiate response\n");
+ return -EIO;
+ }
+
+ /* check validate negotiate info response matches what we got earlier */
+ if (pneg_rsp->Dialect !=
+ cpu_to_le16(tcon->ses->server->vals->protocol_id))
+ goto vneg_out;
+
+ if (pneg_rsp->SecurityMode != cpu_to_le16(tcon->ses->server->sec_mode))
+ goto vneg_out;
+
+ /* do not validate server guid because not saved at negprot time yet */
+
+ if ((le32_to_cpu(pneg_rsp->Capabilities) | SMB2_NT_FIND |
+ SMB2_LARGE_FILES) != tcon->ses->server->capabilities)
+ goto vneg_out;
+
+ /* validate negotiate successful */
+ cifs_dbg(FYI, "validate negotiate info successful\n");
+ return 0;
+
+vneg_out:
+ cifs_dbg(VFS, "protocol revalidation - security settings mismatch\n");
+ return -EIO;
+}
+
int
SMB2_sess_setup(const unsigned int xid, struct cifs_ses *ses,
const struct nls_table *nls_cp)
((tcon->share_flags & SHI1005_FLAGS_DFS) == 0))
cifs_dbg(VFS, "DFS capability contradicts DFS flag\n");
init_copy_chunk_defaults(tcon);
+ if (tcon->ses->server->ops->validate_negotiate)
+ rc = tcon->ses->server->ops->validate_negotiate(xid, tcon);
tcon_exit:
free_rsp_buf(resp_buftype, rsp);
kfree(unc_path);
rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buftype, 0);
rsp = (struct smb2_ioctl_rsp *)iov[0].iov_base;
- if (rc != 0) {
+ if ((rc != 0) && (rc != -EINVAL)) {
if (tcon)
cifs_stats_fail_inc(tcon, SMB2_IOCTL_HE);
goto ioctl_exit;
+ } else if (rc == -EINVAL) {
+ if ((opcode != FSCTL_SRV_COPYCHUNK_WRITE) &&
+ (opcode != FSCTL_SRV_COPYCHUNK)) {
+ if (tcon)
+ cifs_stats_fail_inc(tcon, SMB2_IOCTL_HE);
+ goto ioctl_exit;
+ }
}
/* check if caller wants to look at return data or just return rc */
rc = SendReceive2(xid, ses, iov, num, &resp_buftype, 0);
rsp = (struct smb2_set_info_rsp *)iov[0].iov_base;
- if (rc != 0) {
+ if (rc != 0)
cifs_stats_fail_inc(tcon, SMB2_SET_INFO_HE);
- goto out;
- }
-out:
+
free_rsp_buf(resp_buftype, rsp);
kfree(iov);
return rc;
__le32 TotalBytesWritten;
} __packed;
-/* Response and Request are the same format */
-struct validate_negotiate_info {
+struct validate_negotiate_info_req {
__le32 Capabilities;
__u8 Guid[SMB2_CLIENT_GUID_SIZE];
__le16 SecurityMode;
__le16 DialectCount;
- __le16 Dialect[1];
+ __le16 Dialects[1]; /* dialect (someday maybe list) client asked for */
+} __packed;
+
+struct validate_negotiate_info_rsp {
+ __le32 Capabilities;
+ __u8 Guid[SMB2_CLIENT_GUID_SIZE];
+ __le16 SecurityMode;
+ __le16 Dialect; /* Dialect in use for the connection */
} __packed;
#define RSS_CAPABLE 0x00000001
struct smb2_lock_element *buf);
extern int SMB2_lease_break(const unsigned int xid, struct cifs_tcon *tcon,
__u8 *lease_key, const __le32 lease_state);
+extern int smb3_validate_negotiate(const unsigned int, struct cifs_tcon *);
#endif /* _SMB2PROTO_H */
#define FSCTL_LMR_REQUEST_RESILIENCY 0x001401D4 /* BB add struct */
#define FSCTL_LMR_GET_LINK_TRACK_INF 0x001400E8 /* BB add struct */
#define FSCTL_LMR_SET_LINK_TRACK_INF 0x001400EC /* BB add struct */
-#define FSCTL_VALIDATE_NEGOTIATE_INFO 0x00140204 /* BB add struct */
+#define FSCTL_VALIDATE_NEGOTIATE_INFO 0x00140204
/* Perform server-side data movement */
#define FSCTL_SRV_COPYCHUNK 0x001440F2
#define FSCTL_SRV_COPYCHUNK_WRITE 0x001480F2
goto error_tgt_fput;
/* Check if EPOLLWAKEUP is allowed */
- if ((epds.events & EPOLLWAKEUP) && !capable(CAP_BLOCK_SUSPEND))
- epds.events &= ~EPOLLWAKEUP;
+ ep_take_care_of_epollwakeup(&epds);
/*
* We have to check that the file structure underneath the file descriptor
u16 embed_count;
};
-static void hfsplus_end_io_sync(struct bio *bio, int err)
-{
- if (err)
- clear_bit(BIO_UPTODATE, &bio->bi_flags);
- complete(bio->bi_private);
-}
-
/*
* hfsplus_submit_bio - Perfrom block I/O
* @sb: super block of volume for I/O
int hfsplus_submit_bio(struct super_block *sb, sector_t sector,
void *buf, void **data, int rw)
{
- DECLARE_COMPLETION_ONSTACK(wait);
struct bio *bio;
int ret = 0;
u64 io_size;
bio = bio_alloc(GFP_NOIO, 1);
bio->bi_sector = sector;
bio->bi_bdev = sb->s_bdev;
- bio->bi_end_io = hfsplus_end_io_sync;
- bio->bi_private = &wait;
if (!(rw & WRITE) && data)
*data = (u8 *)buf + offset;
buf = (u8 *)buf + len;
}
- submit_bio(rw, bio);
- wait_for_completion(&wait);
-
- if (!bio_flagged(bio, BIO_UPTODATE))
- ret = -EIO;
-
+ ret = submit_bio_wait(rw, bio);
out:
bio_put(bio);
return ret < 0 ? ret : 0;
#define PAGE_OFS(ofs) ((ofs) & (PAGE_SIZE-1))
-static void request_complete(struct bio *bio, int err)
-{
- complete((struct completion *)bio->bi_private);
-}
-
static int sync_request(struct page *page, struct block_device *bdev, int rw)
{
struct bio bio;
struct bio_vec bio_vec;
- struct completion complete;
bio_init(&bio);
bio.bi_max_vecs = 1;
bio.bi_size = PAGE_SIZE;
bio.bi_bdev = bdev;
bio.bi_sector = page->index * (PAGE_SIZE >> 9);
- init_completion(&complete);
- bio.bi_private = &complete;
- bio.bi_end_io = request_complete;
- submit_bio(rw, &bio);
- wait_for_completion(&complete);
- return test_bit(BIO_UPTODATE, &bio.bi_flags) ? 0 : -EIO;
+ return submit_bio_wait(rw, &bio);
}
static int bdev_readpage(void *_sb, struct page *page)
if (!lockref_get_not_dead(&parent->d_lockref)) {
nd->path.dentry = NULL;
- rcu_read_unlock();
- return -ECHILD;
+ goto out;
}
/*
#include <linux/nfs_fs.h>
#include <linux/sunrpc/rpc_pipe_fs.h>
+#include "../nfs4_fs.h"
#include "../pnfs.h"
#include "../netns.h"
static inline sector_t normalize(sector_t s, int base)
{
sector_t tmp = s; /* Since do_div modifies its argument */
- return s - do_div(tmp, base);
+ return s - sector_div(tmp, base);
}
static inline sector_t normalize_up(sector_t s, int base)
#include <linux/sunrpc/cache.h>
#include <linux/sunrpc/svcauth.h>
#include <linux/sunrpc/rpc_pipe_fs.h>
+#include <linux/nfs_fs.h>
+#include "nfs4_fs.h"
#include "dns_resolve.h"
#include "cache_lib.h"
#include "netns.h"
}
EXPORT_SYMBOL_GPL(nfs4_label_alloc);
#else
-void inline nfs_setsecurity(struct inode *inode, struct nfs_fattr *fattr,
+void nfs_setsecurity(struct inode *inode, struct nfs_fattr *fattr,
struct nfs4_label *label)
{
}
extern struct rpc_procinfo nfs4_procedures[];
#endif
+#ifdef CONFIG_NFS_V4_SECURITY_LABEL
+extern struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags);
+static inline void nfs4_label_free(struct nfs4_label *label)
+{
+ if (label) {
+ kfree(label->label);
+ kfree(label);
+ }
+ return;
+}
+#else
+static inline struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags) { return NULL; }
+static inline void nfs4_label_free(void *label) {}
+#endif /* CONFIG_NFS_V4_SECURITY_LABEL */
+
/* proc.c */
void nfs_close_context(struct nfs_open_context *ctx, int is_sync);
extern struct nfs_client *nfs_init_client(struct nfs_client *clp,
#ifndef __LINUX_FS_NFS_NFS4_FS_H
#define __LINUX_FS_NFS_NFS4_FS_H
+#if defined(CONFIG_NFS_V4_2)
+#define NFS4_MAX_MINOR_VERSION 2
+#elif defined(CONFIG_NFS_V4_1)
+#define NFS4_MAX_MINOR_VERSION 1
+#else
+#define NFS4_MAX_MINOR_VERSION 0
+#endif
+
#if IS_ENABLED(CONFIG_NFS_V4)
#define NFS4_MAX_LOOP_ON_RECOVER (10)
calldata->roc_barrier);
nfs_set_open_stateid(state, &calldata->res.stateid, 0);
renew_lease(server, calldata->timestamp);
- nfs4_close_clear_stateid_flags(state,
- calldata->arg.fmode);
break;
+ case -NFS4ERR_ADMIN_REVOKED:
case -NFS4ERR_STALE_STATEID:
case -NFS4ERR_OLD_STATEID:
case -NFS4ERR_BAD_STATEID:
if (calldata->arg.fmode == 0)
break;
default:
- if (nfs4_async_handle_error(task, server, state) == -EAGAIN)
+ if (nfs4_async_handle_error(task, server, state) == -EAGAIN) {
rpc_restart_call_prepare(task);
+ goto out_release;
+ }
}
+ nfs4_close_clear_stateid_flags(state, calldata->arg.fmode);
+out_release:
nfs_release_seqid(calldata->arg.seqid);
nfs_refresh_inode(calldata->inode, calldata->res.fattr);
dprintk("%s: done, ret = %d!\n", __func__, task->tk_status);
dprintk("%s ERROR %d, Reset session\n", __func__,
task->tk_status);
nfs4_schedule_session_recovery(clp->cl_session, task->tk_status);
- goto restart_call;
+ goto wait_on_recovery;
#endif /* CONFIG_NFS_V4_1 */
case -NFS4ERR_DELAY:
nfs_inc_server_stats(server, NFSIOS_DELAY);
trace_nfs4_delegreturn_exit(&data->args, &data->res, task->tk_status);
switch (task->tk_status) {
- case -NFS4ERR_STALE_STATEID:
- case -NFS4ERR_EXPIRED:
case 0:
renew_lease(data->res.server, data->timestamp);
break;
+ case -NFS4ERR_ADMIN_REVOKED:
+ case -NFS4ERR_DELEG_REVOKED:
+ case -NFS4ERR_BAD_STATEID:
+ case -NFS4ERR_OLD_STATEID:
+ case -NFS4ERR_STALE_STATEID:
+ case -NFS4ERR_EXPIRED:
+ task->tk_status = 0;
+ break;
default:
if (nfs4_async_handle_error(task, data->res.server, NULL) ==
-EAGAIN) {
return;
server = NFS_SERVER(lrp->args.inode);
- if (nfs4_async_handle_error(task, server, NULL) == -EAGAIN) {
+ switch (task->tk_status) {
+ default:
+ task->tk_status = 0;
+ case 0:
+ break;
+ case -NFS4ERR_DELAY:
+ if (nfs4_async_handle_error(task, server, NULL) != -EAGAIN)
+ break;
rpc_restart_call_prepare(task);
return;
}
return mask;
}
+static void put_pipe_info(struct inode *inode, struct pipe_inode_info *pipe)
+{
+ int kill = 0;
+
+ spin_lock(&inode->i_lock);
+ if (!--pipe->files) {
+ inode->i_pipe = NULL;
+ kill = 1;
+ }
+ spin_unlock(&inode->i_lock);
+
+ if (kill)
+ free_pipe_info(pipe);
+}
+
static int
pipe_release(struct inode *inode, struct file *file)
{
- struct pipe_inode_info *pipe = inode->i_pipe;
- int kill = 0;
+ struct pipe_inode_info *pipe = file->private_data;
__pipe_lock(pipe);
if (file->f_mode & FMODE_READ)
kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
}
- spin_lock(&inode->i_lock);
- if (!--pipe->files) {
- inode->i_pipe = NULL;
- kill = 1;
- }
- spin_unlock(&inode->i_lock);
__pipe_unlock(pipe);
- if (kill)
- free_pipe_info(pipe);
-
+ put_pipe_info(inode, pipe);
return 0;
}
{
struct pipe_inode_info *pipe;
bool is_pipe = inode->i_sb->s_magic == PIPEFS_MAGIC;
- int kill = 0;
int ret;
filp->f_version = 0;
goto err;
err:
- spin_lock(&inode->i_lock);
- if (!--pipe->files) {
- inode->i_pipe = NULL;
- kill = 1;
- }
- spin_unlock(&inode->i_lock);
__pipe_unlock(pipe);
- if (kill)
- free_pipe_info(pipe);
+
+ put_pipe_info(inode, pipe);
return ret;
}
*/
res = squashfs_read_cache(target_page, block, bsize, pages,
page);
+ if (res < 0)
+ goto mark_errored;
+
goto out;
}
* dealt with by the caller
*/
for (i = 0; i < pages; i++) {
- if (page[i] == target_page)
+ if (page[i] == NULL || page[i] == target_page)
continue;
flush_dcache_page(page[i]);
SetPageError(page[i]);
struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
struct kobject *kobj = attr_sd->s_parent->s_dir.kobj;
struct sysfs_open_file *of;
- bool has_read, has_write;
+ bool has_read, has_write, has_mmap;
int error = -EACCES;
/* need attr_sd for attr and ops, its parent for kobj */
has_read = battr->read || battr->mmap;
has_write = battr->write || battr->mmap;
+ has_mmap = battr->mmap;
} else {
const struct sysfs_ops *ops = sysfs_file_ops(attr_sd);
has_read = ops->show;
has_write = ops->store;
+ has_mmap = false;
}
/* check perms and supported operations */
if (!of)
goto err_out;
- mutex_init(&of->mutex);
+ /*
+ * The following is done to give a different lockdep key to
+ * @of->mutex for files which implement mmap. This is a rather
+ * crude way to avoid false positive lockdep warning around
+ * mm->mmap_sem - mmap nests @of->mutex under mm->mmap_sem and
+ * reading /sys/block/sda/trace/act_mask grabs sr_mutex, under
+ * which mm->mmap_sem nests, while holding @of->mutex. As each
+ * open file has a separate mutex, it's okay as long as those don't
+ * happen on the same file. At this point, we can't easily give
+ * each file a separate locking class. Let's differentiate on
+ * whether the file has mmap or not for now.
+ */
+ if (has_mmap)
+ mutex_init(&of->mutex);
+ else
+ mutex_init(&of->mutex);
+
of->sd = attr_sd;
of->file = file;
* Should the subsystem abort the loading of an ACPI table if the
* table checksum is incorrect?
*/
+#ifndef ACPI_CHECKSUM_ABORT
#define ACPI_CHECKSUM_ABORT FALSE
+#endif
/*
* Generate a version of ACPICA that only supports "reduced hardware"
struct acpi_hotplug_profile {
struct kobject kobj;
bool enabled:1;
+ bool ignore:1;
enum acpi_hotplug_mode mode;
};
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20130927
+#define ACPI_CA_VERSION 0x20131115
#include <acpi/acconfig.h>
#include <acpi/actypes.h>
--- /dev/null
+
+#include <linux/hardirq.h>
+
+/*
+ * may_use_simd - whether it is allowable at this time to issue SIMD
+ * instructions or access the SIMD register file
+ *
+ * As architectures typically don't preserve the SIMD register file when
+ * taking an interrupt, !in_interrupt() should be a reasonable default.
+ */
+static __must_check inline bool may_use_simd(void)
+{
+ return !in_interrupt();
+}
--- /dev/null
+/*
+ * Shared async block cipher helpers
+ */
+
+#ifndef _CRYPTO_ABLK_HELPER_H
+#define _CRYPTO_ABLK_HELPER_H
+
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <crypto/cryptd.h>
+
+struct async_helper_ctx {
+ struct cryptd_ablkcipher *cryptd_tfm;
+};
+
+extern int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int key_len);
+
+extern int __ablk_encrypt(struct ablkcipher_request *req);
+
+extern int ablk_encrypt(struct ablkcipher_request *req);
+
+extern int ablk_decrypt(struct ablkcipher_request *req);
+
+extern void ablk_exit(struct crypto_tfm *tfm);
+
+extern int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name);
+
+extern int ablk_init(struct crypto_tfm *tfm);
+
+#endif /* _CRYPTO_ABLK_HELPER_H */
return (type ^ CRYPTO_ALG_ASYNC) & mask & CRYPTO_ALG_ASYNC;
}
-#endif /* _CRYPTO_ALGAPI_H */
+noinline unsigned long __crypto_memneq(const void *a, const void *b, size_t size);
+
+/**
+ * crypto_memneq - Compare two areas of memory without leaking
+ * timing information.
+ *
+ * @a: One area of memory
+ * @b: Another area of memory
+ * @size: The size of the area.
+ *
+ * Returns 0 when data is equal, 1 otherwise.
+ */
+static inline int crypto_memneq(const void *a, const void *b, size_t size)
+{
+ return __crypto_memneq(a, b, size) != 0UL ? 1 : 0;
+}
+#endif /* _CRYPTO_ALGAPI_H */
__be32 enckeylen;
};
-#endif /* _CRYPTO_AUTHENC_H */
+struct crypto_authenc_keys {
+ const u8 *authkey;
+ const u8 *enckey;
+
+ unsigned int authkeylen;
+ unsigned int enckeylen;
+};
+int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key,
+ unsigned int keylen);
+
+#endif /* _CRYPTO_AUTHENC_H */
{
sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0);
sg1[num - 1].page_link &= ~0x02;
+ sg1[num - 1].page_link |= 0x01;
}
static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg)
policy->cpuinfo.max_freq);
}
+#ifdef CONFIG_CPU_FREQ
+void cpufreq_suspend(void);
+void cpufreq_resume(void);
+#else
+static inline void cpufreq_suspend(void) {}
+static inline void cpufreq_resume(void) {}
+#endif
+
/*********************************************************************
* CPUFREQ NOTIFIER INTERFACE *
*********************************************************************/
struct efi_variable var;
struct list_head list;
struct kobject kobj;
+ bool scanning;
+ bool deleting;
};
#if defined(CONFIG_EFI_VARS) || defined(CONFIG_EFI_VARS_MODULE)
int efivars_sysfs_init(void);
+#define EFIVARS_DATA_SIZE_MAX 1024
+
#endif /* CONFIG_EFI_VARS */
#endif /* _LINUX_EFI_H */
#ifdef CONFIG_PERF_EVENTS
int perf_refcount;
struct hlist_head __percpu *perf_events;
+
+ int (*perf_perm)(struct ftrace_event_call *,
+ struct perf_event *);
#endif
};
} \
early_initcall(trace_init_flags_##name);
+#define __TRACE_EVENT_PERF_PERM(name, expr...) \
+ static int perf_perm_##name(struct ftrace_event_call *tp_event, \
+ struct perf_event *p_event) \
+ { \
+ return ({ expr; }); \
+ } \
+ static int __init trace_init_perf_perm_##name(void) \
+ { \
+ event_##name.perf_perm = &perf_perm_##name; \
+ return 0; \
+ } \
+ early_initcall(trace_init_perf_perm_##name);
+
#define PERF_MAX_TRACE_SIZE 2048
#define MAX_FILTER_STR_VAL 256 /* Should handle KSYM_SYMBOL_LEN */
#define __LINUX_GPIO_DRIVER_H
#include <linux/types.h>
+#include <linux/module.h>
struct device;
struct gpio_desc;
+struct of_phandle_args;
+struct device_node;
struct seq_file;
/**
int gpiod_lock_as_irq(struct gpio_desc *desc);
void gpiod_unlock_as_irq(struct gpio_desc *desc);
+enum gpio_lookup_flags {
+ GPIO_ACTIVE_HIGH = (0 << 0),
+ GPIO_ACTIVE_LOW = (1 << 0),
+ GPIO_OPEN_DRAIN = (1 << 1),
+ GPIO_OPEN_SOURCE = (1 << 2),
+};
+
/**
* Lookup table for associating GPIOs to specific devices and functions using
* platform data.
*/
unsigned int idx;
/*
- * mask of GPIOF_* values
+ * mask of GPIO_* values
*/
- unsigned long flags;
+ enum gpio_lookup_flags flags;
};
/*
#include <linux/hid.h>
#include <linux/hid-sensor-ids.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
/**
* struct hid_sensor_hub_attribute_info - Attribute info
struct platform_device *pdev;
unsigned usage_id;
bool data_ready;
+ struct iio_trigger *trigger;
struct hid_sensor_hub_attribute_info poll;
struct hid_sensor_hub_attribute_info report_state;
struct hid_sensor_hub_attribute_info power_state;
};
typedef enum irqreturn irqreturn_t;
-#define IRQ_RETVAL(x) ((x) != IRQ_NONE)
+#define IRQ_RETVAL(x) ((x) ? IRQ_HANDLED : IRQ_NONE)
#endif
#define NFS4_VERSION 4
#define NFS4_MINOR_VERSION 0
-#if defined(CONFIG_NFS_V4_2)
-#define NFS4_MAX_MINOR_VERSION 2
-#else
-#if defined(CONFIG_NFS_V4_1)
-#define NFS4_MAX_MINOR_VERSION 1
-#else
-#define NFS4_MAX_MINOR_VERSION 0
-#endif /* CONFIG_NFS_V4_1 */
-#endif /* CONFIG_NFS_V4_2 */
-
#define NFS4_DEBUG 1
/* Index of predefined Linux client operations */
extern int nfs_mountpoint_expiry_timeout;
extern void nfs_release_automount_timer(void);
-/*
- * linux/fs/nfs/nfs4proc.c
- */
-#ifdef CONFIG_NFS_V4_SECURITY_LABEL
-extern struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags);
-static inline void nfs4_label_free(struct nfs4_label *label)
-{
- if (label) {
- kfree(label->label);
- kfree(label);
- }
- return;
-}
-#else
-static inline struct nfs4_label *nfs4_label_alloc(struct nfs_server *server, gfp_t flags) { return NULL; }
-static inline void nfs4_label_free(void *label) {}
-#endif
-
/*
* linux/fs/nfs/unlink.c
*/
struct padata_serial_queue __percpu *squeue;
atomic_t reorder_objects;
atomic_t refcnt;
+ atomic_t seq_nr;
struct padata_cpumask cpumask;
spinlock_t lock ____cacheline_aligned;
- spinlock_t seq_lock;
- unsigned int seq_nr;
unsigned int processed;
struct timer_list timer;
};
unsigned int balance_interval; /* initialise to 1. units in ms. */
unsigned int nr_balance_failed; /* initialise to 0 */
- u64 last_update;
-
/* idle_balance() stats */
u64 max_newidle_lb_cost;
unsigned long next_decay_max_lb_cost;
/**
* kmalloc - allocate memory
* @size: how many bytes of memory are required.
- * @flags: the type of memory to allocate (see kcalloc).
+ * @flags: the type of memory to allocate.
*
* kmalloc is the normal method of allocating memory
* for objects smaller than page size in the kernel.
+ *
+ * The @flags argument may be one of:
+ *
+ * %GFP_USER - Allocate memory on behalf of user. May sleep.
+ *
+ * %GFP_KERNEL - Allocate normal kernel ram. May sleep.
+ *
+ * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools.
+ * For example, use this inside interrupt handlers.
+ *
+ * %GFP_HIGHUSER - Allocate pages from high memory.
+ *
+ * %GFP_NOIO - Do not do any I/O at all while trying to get memory.
+ *
+ * %GFP_NOFS - Do not make any fs calls while trying to get memory.
+ *
+ * %GFP_NOWAIT - Allocation will not sleep.
+ *
+ * %GFP_THISNODE - Allocate node-local memory only.
+ *
+ * %GFP_DMA - Allocation suitable for DMA.
+ * Should only be used for kmalloc() caches. Otherwise, use a
+ * slab created with SLAB_DMA.
+ *
+ * Also it is possible to set different flags by OR'ing
+ * in one or more of the following additional @flags:
+ *
+ * %__GFP_COLD - Request cache-cold pages instead of
+ * trying to return cache-warm pages.
+ *
+ * %__GFP_HIGH - This allocation has high priority and may use emergency pools.
+ *
+ * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail
+ * (think twice before using).
+ *
+ * %__GFP_NORETRY - If memory is not immediately available,
+ * then give up at once.
+ *
+ * %__GFP_NOWARN - If allocation fails, don't issue any warnings.
+ *
+ * %__GFP_REPEAT - If allocation fails initially, try once more before failing.
+ *
+ * There are other flags available as well, but these are not intended
+ * for general use, and so are not documented here. For a full list of
+ * potential flags, always refer to linux/gfp.h.
*/
static __always_inline void *kmalloc(size_t size, gfp_t flags)
{
int cache_show(struct kmem_cache *s, struct seq_file *m);
void print_slabinfo_header(struct seq_file *m);
-/**
- * kmalloc - allocate memory
- * @size: how many bytes of memory are required.
- * @flags: the type of memory to allocate.
- *
- * The @flags argument may be one of:
- *
- * %GFP_USER - Allocate memory on behalf of user. May sleep.
- *
- * %GFP_KERNEL - Allocate normal kernel ram. May sleep.
- *
- * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools.
- * For example, use this inside interrupt handlers.
- *
- * %GFP_HIGHUSER - Allocate pages from high memory.
- *
- * %GFP_NOIO - Do not do any I/O at all while trying to get memory.
- *
- * %GFP_NOFS - Do not make any fs calls while trying to get memory.
- *
- * %GFP_NOWAIT - Allocation will not sleep.
- *
- * %GFP_THISNODE - Allocate node-local memory only.
- *
- * %GFP_DMA - Allocation suitable for DMA.
- * Should only be used for kmalloc() caches. Otherwise, use a
- * slab created with SLAB_DMA.
- *
- * Also it is possible to set different flags by OR'ing
- * in one or more of the following additional @flags:
- *
- * %__GFP_COLD - Request cache-cold pages instead of
- * trying to return cache-warm pages.
- *
- * %__GFP_HIGH - This allocation has high priority and may use emergency pools.
- *
- * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail
- * (think twice before using).
- *
- * %__GFP_NORETRY - If memory is not immediately available,
- * then give up at once.
- *
- * %__GFP_NOWARN - If allocation fails, don't issue any warnings.
- *
- * %__GFP_REPEAT - If allocation fails initially, try once more before failing.
- *
- * There are other flags available as well, but these are not intended
- * for general use, and so are not documented here. For a full list of
- * potential flags, always refer to linux/gfp.h.
- *
- * kmalloc is the normal method of allocating memory
- * in the kernel.
- */
-static __always_inline void *kmalloc(size_t size, gfp_t flags);
-
/**
* kmalloc_array - allocate memory for an array.
* @n: number of elements.
#define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D
+#ifdef CONFIG_ARCH_TEGRA
int tegra_powergate_is_powered(int id);
int tegra_powergate_power_on(int id);
int tegra_powergate_power_off(int id);
/* Must be called with clk disabled, and returns with clk enabled */
int tegra_powergate_sequence_power_up(int id, struct clk *clk);
+#else
+static inline int tegra_powergate_is_powered(int id)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_powergate_power_on(int id)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_powergate_power_off(int id)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_powergate_remove_clamping(int id)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk)
+{
+ return -ENOSYS;
+}
+#endif
#endif /* _MACH_TEGRA_POWERGATE_H_ */
#define TRACE_EVENT_FLAGS(event, flag)
+#define TRACE_EVENT_PERF_PERM(event, expr...)
+
#endif /* DECLARE_TRACE */
#ifndef TRACE_EVENT
#define TRACE_EVENT_FLAGS(event, flag)
+#define TRACE_EVENT_PERF_PERM(event, expr...)
+
#endif /* ifdef TRACE_EVENT (see note above) */
int ip_ra_control(struct sock *sk, unsigned char on,
void (*destructor)(struct sock *));
-int ip_recv_error(struct sock *sk, struct msghdr *msg, int len);
+int ip_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len);
void ip_icmp_error(struct sock *sk, struct sk_buff *skb, int err, __be16 port,
u32 info, u8 *payload);
void ip_local_error(struct sock *sk, int err, __be32 daddr, __be16 dport,
int ip6_datagram_connect(struct sock *sk, struct sockaddr *addr, int addr_len);
-int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len);
-int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len);
+int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len,
+ int *addr_len);
+int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len,
+ int *addr_len);
void ipv6_icmp_error(struct sock *sk, struct sk_buff *skb, int err, __be16 port,
u32 info, u8 *payload);
void ipv6_local_error(struct sock *sk, int err, struct flowi6 *fl6, u32 info);
/* Compatibility glue so we can support IPv6 when it's compiled as a module */
struct pingv6_ops {
- int (*ipv6_recv_error)(struct sock *sk, struct msghdr *msg, int len);
+ int (*ipv6_recv_error)(struct sock *sk, struct msghdr *msg, int len,
+ int *addr_len);
int (*ip6_datagram_recv_ctl)(struct sock *sk, struct msghdr *msg,
struct sk_buff *skb);
int (*icmpv6_err_convert)(u8 type, u8 code, int *err);
#define SCTP_NEED_FRTX 0x1
#define SCTP_DONT_FRTX 0x2
__u16 rtt_in_progress:1, /* This chunk used for RTT calc? */
+ resent:1, /* Has this chunk ever been resent. */
has_tsn:1, /* Does this chunk have a TSN yet? */
has_ssn:1, /* Does this chunk have a SSN yet? */
singleton:1, /* Only chunk in the packet? */
*/
unsigned ordered_tag:1;
+ /* True if the controller does not support WRITE SAME */
+ unsigned no_write_same:1;
+
/*
* Countdown for host blocking with no commands outstanding.
*/
/* Don't resume host in EH */
unsigned eh_noresume:1;
+ /* The controller does not support WRITE SAME */
+ unsigned no_write_same:1;
+
/*
* Optional work queue to be utilized by the transport
*/
SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \
.kcontrol_news = wcontrols, .num_kcontrols = 1}
#define SND_SOC_DAPM_MUX(wname, wreg, wshift, winvert, wcontrols) \
-{ .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, \
+{ .id = snd_soc_dapm_mux, .name = wname, \
+ SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \
.kcontrol_news = wcontrols, .num_kcontrols = 1}
#define SND_SOC_DAPM_VIRT_MUX(wname, wreg, wshift, winvert, wcontrols) \
{ .id = snd_soc_dapm_virt_mux, .name = wname, \
#define TRACE_EVENT_FLAGS(name, value) \
__TRACE_EVENT_FLAGS(name, value)
+#undef TRACE_EVENT_PERF_PERM
+#define TRACE_EVENT_PERF_PERM(name, expr...) \
+ __TRACE_EVENT_PERF_PERM(name, expr)
+
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
#undef TRACE_EVENT_FLAGS
#define TRACE_EVENT_FLAGS(event, flag)
+#undef TRACE_EVENT_PERF_PERM
+#define TRACE_EVENT_PERF_PERM(event, expr...)
+
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
/*
__data_size += (len) * sizeof(type);
#undef __string
-#define __string(item, src) __dynamic_array(char, item, strlen(src) + 1)
+#define __string(item, src) __dynamic_array(char, item, \
+ strlen((src) ? (const char *)(src) : "(null)") + 1)
#undef DECLARE_EVENT_CLASS
#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \
#undef __assign_str
#define __assign_str(dst, src) \
- strcpy(__get_str(dst), src);
+ strcpy(__get_str(dst), (src) ? (const char *)(src) : "(null)");
#undef TP_fast_assign
#define TP_fast_assign(args...) args
__u64 data;
} EPOLL_PACKED;
-
+#ifdef CONFIG_PM_SLEEP
+static inline void ep_take_care_of_epollwakeup(struct epoll_event *epev)
+{
+ if ((epev->events & EPOLLWAKEUP) && !capable(CAP_BLOCK_SUSPEND))
+ epev->events &= ~EPOLLWAKEUP;
+}
+#else
+static inline void ep_take_care_of_epollwakeup(struct epoll_event *epev)
+{
+ epev->events &= ~EPOLLWAKEUP;
+}
+#endif
#endif /* _UAPI_LINUX_EVENTPOLL_H */
#define GENL_ID_GENERATE 0
#define GENL_ID_CTRL NLMSG_MIN_TYPE
#define GENL_ID_VFS_DQUOT (NLMSG_MIN_TYPE + 1)
+#define GENL_ID_PMCRAID (NLMSG_MIN_TYPE + 2)
/**************************************************************************
* Controller
IFLA_HSR_UNSPEC,
IFLA_HSR_SLAVE1,
IFLA_HSR_SLAVE2,
- IFLA_HSR_MULTICAST_SPEC,
+ IFLA_HSR_MULTICAST_SPEC, /* Last byte of supervision addr */
+ IFLA_HSR_SUPERVISION_ADDR, /* Supervision frame multicast addr */
+ IFLA_HSR_SEQ_NR,
__IFLA_HSR_MAX,
};
};
enum {
+ /* NETLINK_DIAG_NONE, standard nl API requires this attribute! */
NETLINK_DIAG_MEMINFO,
NETLINK_DIAG_GROUPS,
NETLINK_DIAG_RX_RING,
};
enum {
+ /* PACKET_DIAG_NONE, standard nl API requires this attribute! */
PACKET_DIAG_INFO,
PACKET_DIAG_MCLIST,
PACKET_DIAG_RX_RING,
};
enum {
+ /* UNIX_DIAG_NONE, standard nl API requires this attribute! */
UNIX_DIAG_NAME,
UNIX_DIAG_VFS,
UNIX_DIAG_PEER,
static DEFINE_MUTEX(cgroup_root_mutex);
+/*
+ * cgroup destruction makes heavy use of work items and there can be a lot
+ * of concurrent destructions. Use a separate workqueue so that cgroup
+ * destruction work items don't end up filling up max_active of system_wq
+ * which may lead to deadlock.
+ */
+static struct workqueue_struct *cgroup_destroy_wq;
+
/*
* Generate an array of cgroup subsystem pointers. At boot time, this is
* populated with the built in subsystems, and modular subsystems are
static int cgroup_destroy_locked(struct cgroup *cgrp);
static int cgroup_addrm_files(struct cgroup *cgrp, struct cftype cfts[],
bool is_add);
+static int cgroup_file_release(struct inode *inode, struct file *file);
/**
* cgroup_css - obtain a cgroup's css for the specified subsystem
struct cgroup *cgrp = container_of(head, struct cgroup, rcu_head);
INIT_WORK(&cgrp->destroy_work, cgroup_free_fn);
- schedule_work(&cgrp->destroy_work);
+ queue_work(cgroup_destroy_wq, &cgrp->destroy_work);
}
static void cgroup_diput(struct dentry *dentry, struct inode *inode)
.read = seq_read,
.write = cgroup_file_write,
.llseek = seq_lseek,
- .release = single_release,
+ .release = cgroup_file_release,
};
static int cgroup_file_open(struct inode *inode, struct file *file)
ret = cft->release(inode, file);
if (css->ss)
css_put(css);
+ if (file->f_op == &cgroup_seqfile_operations)
+ single_release(inode, file);
return ret;
}
* css_put(). dput() requires process context which we don't have.
*/
INIT_WORK(&css->destroy_work, css_free_work_fn);
- schedule_work(&css->destroy_work);
+ queue_work(cgroup_destroy_wq, &css->destroy_work);
}
static void css_release(struct percpu_ref *ref)
container_of(ref, struct cgroup_subsys_state, refcnt);
INIT_WORK(&css->destroy_work, css_killed_work_fn);
- schedule_work(&css->destroy_work);
+ queue_work(cgroup_destroy_wq, &css->destroy_work);
}
/**
return err;
}
+static int __init cgroup_wq_init(void)
+{
+ /*
+ * There isn't much point in executing destruction path in
+ * parallel. Good chunk is serialized with cgroup_mutex anyway.
+ * Use 1 for @max_active.
+ *
+ * We would prefer to do this in cgroup_init() above, but that
+ * is called before init_workqueues(): so leave this until after.
+ */
+ cgroup_destroy_wq = alloc_workqueue("cgroup_destroy", 0, 1);
+ BUG_ON(!cgroup_destroy_wq);
+ return 0;
+}
+core_initcall(cgroup_wq_init);
+
/*
* proc_cgroup_show()
* - Print task's cgroup paths into seq_file, one line for each hierarchy
need_loop = task_has_mempolicy(tsk) ||
!nodes_intersects(*newmems, tsk->mems_allowed);
- if (need_loop)
+ if (need_loop) {
+ local_irq_disable();
write_seqcount_begin(&tsk->mems_allowed_seq);
+ }
nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems);
mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP1);
mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP2);
tsk->mems_allowed = *newmems;
- if (need_loop)
+ if (need_loop) {
write_seqcount_end(&tsk->mems_allowed_seq);
+ local_irq_enable();
+ }
task_unlock(tsk);
}
{
int cpu;
- if (event->cpu != -1) {
- swevent_hlist_put_cpu(event, event->cpu);
- return;
- }
-
for_each_possible_cpu(cpu)
swevent_hlist_put_cpu(event, cpu);
}
int err;
int cpu, failed_cpu;
- if (event->cpu != -1)
- return swevent_hlist_get_cpu(event, event->cpu);
-
get_online_cpus();
for_each_possible_cpu(cpu) {
err = swevent_hlist_get_cpu(event, cpu);
static inline int init_kernel_text(unsigned long addr)
{
if (addr >= (unsigned long)_sinittext &&
- addr <= (unsigned long)_einittext)
+ addr < (unsigned long)_einittext)
return 1;
return 0;
}
int core_kernel_text(unsigned long addr)
{
if (addr >= (unsigned long)_stext &&
- addr <= (unsigned long)_etext)
+ addr < (unsigned long)_etext)
return 1;
if (system_state == SYSTEM_BOOTING &&
bool is_early = desc->action &&
desc->action->flags & IRQF_EARLY_RESUME;
- if (is_early != want_early)
+ if (!is_early && want_early)
continue;
raw_spin_lock_irqsave(&desc->lock, flags);
static int padata_cpu_hash(struct parallel_data *pd)
{
+ unsigned int seq_nr;
int cpu_index;
/*
* seq_nr mod. number of cpus in use.
*/
- spin_lock(&pd->seq_lock);
- cpu_index = pd->seq_nr % cpumask_weight(pd->cpumask.pcpu);
- pd->seq_nr++;
- spin_unlock(&pd->seq_lock);
+ seq_nr = atomic_inc_return(&pd->seq_nr);
+ cpu_index = seq_nr % cpumask_weight(pd->cpumask.pcpu);
return padata_index_to_cpu(pd, cpu_index);
}
padata_init_pqueues(pd);
padata_init_squeues(pd);
setup_timer(&pd->timer, padata_reorder_timer, (unsigned long)pd);
- pd->seq_nr = 0;
+ atomic_set(&pd->seq_nr, -1);
atomic_set(&pd->reorder_objects, 0);
atomic_set(&pd->refcnt, 0);
pd->pinst = pinst;
static int rcu_idle_lazy_gp_delay = RCU_IDLE_LAZY_GP_DELAY;
module_param(rcu_idle_lazy_gp_delay, int, 0644);
-extern int tick_nohz_enabled;
+extern int tick_nohz_active;
/*
* Try to advance callbacks for all flavors of RCU on the current CPU, but
int tne;
/* Handle nohz enablement switches conservatively. */
- tne = ACCESS_ONCE(tick_nohz_enabled);
+ tne = ACCESS_ONCE(tick_nohz_active);
if (tne != rdtp->tick_nohz_enabled_snap) {
if (rcu_cpu_has_callbacks(cpu, NULL))
invoke_rcu_core(); /* force nohz to see update. */
} while (need_resched());
}
EXPORT_SYMBOL(preempt_schedule);
+#endif /* CONFIG_PREEMPT */
/*
* this is the entry point to schedule() from kernel preemption
exception_exit(prev_state);
}
-#endif /* CONFIG_PREEMPT */
-
int default_wake_function(wait_queue_t *curr, unsigned mode, int wake_flags,
void *key)
{
cpumask_clear_cpu(rq->cpu, old_rd->span);
/*
- * If we dont want to free the old_rt yet then
+ * If we dont want to free the old_rd yet then
* set old_rd to NULL to skip the freeing later
* in this function:
*/
if (sd) {
id = cpumask_first(sched_domain_span(sd));
size = cpumask_weight(sched_domain_span(sd));
- rcu_assign_pointer(per_cpu(sd_busy, cpu), sd->parent);
+ sd = sd->parent; /* sd_busy */
}
+ rcu_assign_pointer(per_cpu(sd_busy, cpu), sd);
rcu_assign_pointer(per_cpu(sd_llc, cpu), sd);
per_cpu(sd_llc_size, cpu) = size;
*/
for_each_cpu(cpu, sched_group_cpus(sdg)) {
- struct sched_group *sg = cpu_rq(cpu)->sd->groups;
+ struct sched_group_power *sgp;
+ struct rq *rq = cpu_rq(cpu);
- power_orig += sg->sgp->power_orig;
- power += sg->sgp->power;
+ /*
+ * build_sched_domains() -> init_sched_groups_power()
+ * gets here before we've attached the domains to the
+ * runqueues.
+ *
+ * Use power_of(), which is set irrespective of domains
+ * in update_cpu_power().
+ *
+ * This avoids power/power_orig from being 0 and
+ * causing divide-by-zero issues on boot.
+ *
+ * Runtime updates will correct power_orig.
+ */
+ if (unlikely(!rq->sd)) {
+ power_orig += power_of(cpu);
+ power += power_of(cpu);
+ continue;
+ }
+
+ sgp = rq->sd->groups->sgp;
+ power_orig += sgp->power_orig;
+ power += sgp->power;
}
} else {
/*
*/
ktime_t tick_next_period;
ktime_t tick_period;
+
+/*
+ * tick_do_timer_cpu is a timer core internal variable which holds the CPU NR
+ * which is responsible for calling do_timer(), i.e. the timekeeping stuff. This
+ * variable has two functions:
+ *
+ * 1) Prevent a thundering herd issue of a gazillion of CPUs trying to grab the
+ * timekeeping lock all at once. Only the CPU which is assigned to do the
+ * update is handling it.
+ *
+ * 2) Hand off the duty in the NOHZ idle case by setting the value to
+ * TICK_DO_TIMER_NONE, i.e. a non existing CPU. So the next cpu which looks
+ * at it will take over and keep the time keeping alive. The handover
+ * procedure also covers cpu hotplug.
+ */
int tick_do_timer_cpu __read_mostly = TICK_DO_TIMER_BOOT;
/*
/*
* NO HZ enabled ?
*/
-int tick_nohz_enabled __read_mostly = 1;
-
+static int tick_nohz_enabled __read_mostly = 1;
+int tick_nohz_active __read_mostly;
/*
* Enable / Disable tickless mode
*/
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
ktime_t now, idle;
- if (!tick_nohz_enabled)
+ if (!tick_nohz_active)
return -1;
now = ktime_get();
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
ktime_t now, iowait;
- if (!tick_nohz_enabled)
+ if (!tick_nohz_active)
return -1;
now = ktime_get();
return false;
}
- if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
+ if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) {
+ ts->sleep_length = (ktime_t) { .tv64 = NSEC_PER_SEC/HZ };
return false;
+ }
if (need_resched())
return false;
local_irq_disable();
ts = &__get_cpu_var(tick_cpu_sched);
- /*
- * set ts->inidle unconditionally. even if the system did not
- * switch to nohz mode the cpu frequency governers rely on the
- * update of the idle time accounting in tick_nohz_start_idle().
- */
ts->inidle = 1;
__tick_nohz_idle_enter(ts);
struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
ktime_t next;
- if (!tick_nohz_enabled)
+ if (!tick_nohz_active)
return;
local_irq_disable();
local_irq_enable();
return;
}
-
+ tick_nohz_active = 1;
ts->nohz_mode = NOHZ_MODE_LOWRES;
/*
}
#ifdef CONFIG_NO_HZ_COMMON
- if (tick_nohz_enabled)
+ if (tick_nohz_enabled) {
ts->nohz_mode = NOHZ_MODE_HIGHRES;
+ tick_nohz_active = 1;
+ }
#endif
}
#endif /* HIGH_RES_TIMERS */
tk->xtime_nsec -= remainder;
tk->xtime_nsec += 1ULL << tk->shift;
tk->ntp_error += remainder << tk->ntp_error_shift;
-
+ tk->ntp_error -= (1ULL << tk->shift) << tk->ntp_error_shift;
}
#else
#define old_vsyscall_fixup(tk)
/*
* The APs use this path later in boot
*/
- base = kmalloc_node(sizeof(*base),
- GFP_KERNEL | __GFP_ZERO,
- cpu_to_node(cpu));
+ base = kzalloc_node(sizeof(*base), GFP_KERNEL,
+ cpu_to_node(cpu));
if (!base)
return -ENOMEM;
static int __register_ftrace_function(struct ftrace_ops *ops)
{
- if (unlikely(ftrace_disabled))
- return -ENODEV;
-
if (FTRACE_WARN_ON(ops == &global_ops))
return -EINVAL;
{
int ret;
- if (ftrace_disabled)
- return -ENODEV;
-
if (WARN_ON(!(ops->flags & FTRACE_OPS_FL_ENABLED)))
return -EBUSY;
static int ftrace_startup(struct ftrace_ops *ops, int command)
{
bool hash_enable = true;
+ int ret;
if (unlikely(ftrace_disabled))
return -ENODEV;
+ ret = __register_ftrace_function(ops);
+ if (ret)
+ return ret;
+
ftrace_start_up++;
command |= FTRACE_UPDATE_CALLS;
return 0;
}
-static void ftrace_shutdown(struct ftrace_ops *ops, int command)
+static int ftrace_shutdown(struct ftrace_ops *ops, int command)
{
bool hash_disable = true;
+ int ret;
if (unlikely(ftrace_disabled))
- return;
+ return -ENODEV;
+
+ ret = __unregister_ftrace_function(ops);
+ if (ret)
+ return ret;
ftrace_start_up--;
/*
}
if (!command || !ftrace_enabled)
- return;
+ return 0;
ftrace_run_update_code(command);
+ return 0;
}
static void ftrace_startup_sysctl(void)
if (i == FTRACE_FUNC_HASHSIZE)
return;
- ret = __register_ftrace_function(&trace_probe_ops);
- if (!ret)
- ret = ftrace_startup(&trace_probe_ops, 0);
+ ret = ftrace_startup(&trace_probe_ops, 0);
ftrace_probe_registered = 1;
}
static void __disable_ftrace_function_probe(void)
{
- int ret;
int i;
if (!ftrace_probe_registered)
}
/* no more funcs left */
- ret = __unregister_ftrace_function(&trace_probe_ops);
- if (!ret)
- ftrace_shutdown(&trace_probe_ops, 0);
+ ftrace_shutdown(&trace_probe_ops, 0);
ftrace_probe_registered = 0;
}
static inline int ftrace_init_dyn_debugfs(struct dentry *d_tracer) { return 0; }
static inline void ftrace_startup_enable(int command) { }
/* Keep as macros so we do not need to define the commands */
-# define ftrace_startup(ops, command) \
- ({ \
- (ops)->flags |= FTRACE_OPS_FL_ENABLED; \
- 0; \
+# define ftrace_startup(ops, command) \
+ ({ \
+ int ___ret = __register_ftrace_function(ops); \
+ if (!___ret) \
+ (ops)->flags |= FTRACE_OPS_FL_ENABLED; \
+ ___ret; \
})
-# define ftrace_shutdown(ops, command) do { } while (0)
+# define ftrace_shutdown(ops, command) __unregister_ftrace_function(ops)
+
# define ftrace_startup_sysctl() do { } while (0)
# define ftrace_shutdown_sysctl() do { } while (0)
mutex_lock(&ftrace_lock);
- ret = __register_ftrace_function(ops);
- if (!ret)
- ret = ftrace_startup(ops, 0);
+ ret = ftrace_startup(ops, 0);
mutex_unlock(&ftrace_lock);
int ret;
mutex_lock(&ftrace_lock);
- ret = __unregister_ftrace_function(ops);
- if (!ret)
- ftrace_shutdown(ops, 0);
+ ret = ftrace_shutdown(ops, 0);
mutex_unlock(&ftrace_lock);
return ret;
return NOTIFY_DONE;
}
+/* Just a place holder for function graph */
+static struct ftrace_ops fgraph_ops __read_mostly = {
+ .func = ftrace_stub,
+ .flags = FTRACE_OPS_FL_STUB | FTRACE_OPS_FL_GLOBAL |
+ FTRACE_OPS_FL_RECURSION_SAFE,
+};
+
int register_ftrace_graph(trace_func_graph_ret_t retfunc,
trace_func_graph_ent_t entryfunc)
{
ftrace_graph_return = retfunc;
ftrace_graph_entry = entryfunc;
- ret = ftrace_startup(&global_ops, FTRACE_START_FUNC_RET);
+ ret = ftrace_startup(&fgraph_ops, FTRACE_START_FUNC_RET);
out:
mutex_unlock(&ftrace_lock);
ftrace_graph_active--;
ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
ftrace_graph_entry = ftrace_graph_entry_stub;
- ftrace_shutdown(&global_ops, FTRACE_STOP_FUNC_RET);
+ ftrace_shutdown(&fgraph_ops, FTRACE_STOP_FUNC_RET);
unregister_pm_notifier(&ftrace_suspend_notifier);
unregister_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL);
static int perf_trace_event_perm(struct ftrace_event_call *tp_event,
struct perf_event *p_event)
{
+ if (tp_event->perf_perm) {
+ int ret = tp_event->perf_perm(tp_event, p_event);
+ if (ret)
+ return ret;
+ }
+
/* The ftrace function trace is allowed only for root. */
if (ftrace_event_is_function(tp_event) &&
perf_paranoid_tracepoint_raw() && !capable(CAP_SYS_ADMIN))
int perf_trace_init(struct perf_event *p_event)
{
struct ftrace_event_call *tp_event;
- int event_id = p_event->attr.config;
+ u64 event_id = p_event->attr.config;
int ret = -EINVAL;
mutex_lock(&event_mutex);
/* Disable any running events */
__ftrace_set_clr_event_nolock(tr, NULL, NULL, NULL, 0);
+ /* Access to events are within rcu_read_lock_sched() */
+ synchronize_sched();
+
down_write(&trace_event_sem);
__trace_remove_event_dirs(tr);
debugfs_remove_recursive(tr->event_dir);
if (!tr->sys_refcount_enter)
unregister_trace_sys_enter(ftrace_syscall_enter, tr);
mutex_unlock(&syscall_trace_lock);
- /*
- * Callers expect the event to be completely disabled on
- * return, so wait for current handlers to finish.
- */
- synchronize_sched();
}
static int reg_event_syscall_exit(struct ftrace_event_file *file,
if (!tr->sys_refcount_exit)
unregister_trace_sys_exit(ftrace_syscall_exit, tr);
mutex_unlock(&syscall_trace_lock);
- /*
- * Callers expect the event to be completely disabled on
- * return, so wait for current handlers to finish.
- */
- synchronize_sched();
}
static int __init init_syscall_trace(struct ftrace_event_call *call)
/* I: attributes used when instantiating standard unbound pools on demand */
static struct workqueue_attrs *unbound_std_wq_attrs[NR_STD_WORKER_POOLS];
+/* I: attributes used when instantiating ordered pools on demand */
+static struct workqueue_attrs *ordered_wq_attrs[NR_STD_WORKER_POOLS];
+
struct workqueue_struct *system_wq __read_mostly;
EXPORT_SYMBOL(system_wq);
struct workqueue_struct *system_highpri_wq __read_mostly;
static inline void debug_work_deactivate(struct work_struct *work) { }
#endif
-/* allocate ID and assign it to @pool */
+/**
+ * worker_pool_assign_id - allocate ID and assing it to @pool
+ * @pool: the pool pointer of interest
+ *
+ * Returns 0 if ID in [0, WORK_OFFQ_POOL_NONE) is allocated and assigned
+ * successfully, -errno on failure.
+ */
static int worker_pool_assign_id(struct worker_pool *pool)
{
int ret;
lockdep_assert_held(&wq_pool_mutex);
- ret = idr_alloc(&worker_pool_idr, pool, 0, 0, GFP_KERNEL);
+ ret = idr_alloc(&worker_pool_idr, pool, 0, WORK_OFFQ_POOL_NONE,
+ GFP_KERNEL);
if (ret >= 0) {
pool->id = ret;
return 0;
debug_work_activate(work);
- /* if dying, only works from the same workqueue are allowed */
+ /* if draining, only works from the same workqueue are allowed */
if (unlikely(wq->flags & __WQ_DRAINING) &&
WARN_ON_ONCE(!is_chained_work(wq)))
return;
if (IS_ERR(worker->task))
goto fail;
+ set_user_nice(worker->task, pool->attrs->nice);
+
+ /* prevent userland from meddling with cpumask of workqueue workers */
+ worker->task->flags |= PF_NO_SETAFFINITY;
+
/*
* set_cpus_allowed_ptr() will fail if the cpumask doesn't have any
* online CPUs. It'll be re-applied when any of the CPUs come up.
*/
- set_user_nice(worker->task, pool->attrs->nice);
set_cpus_allowed_ptr(worker->task, pool->attrs->cpumask);
- /* prevent userland from meddling with cpumask of workqueue workers */
- worker->task->flags |= PF_NO_SETAFFINITY;
-
/*
* The caller is responsible for ensuring %POOL_DISASSOCIATED
* remains stable across this function. See the comments above the
static int alloc_and_link_pwqs(struct workqueue_struct *wq)
{
bool highpri = wq->flags & WQ_HIGHPRI;
- int cpu;
+ int cpu, ret;
if (!(wq->flags & WQ_UNBOUND)) {
wq->cpu_pwqs = alloc_percpu(struct pool_workqueue);
mutex_unlock(&wq->mutex);
}
return 0;
+ } else if (wq->flags & __WQ_ORDERED) {
+ ret = apply_workqueue_attrs(wq, ordered_wq_attrs[highpri]);
+ /* there should only be single pwq for ordering guarantee */
+ WARN(!ret && (wq->pwqs.next != &wq->dfl_pwq->pwqs_node ||
+ wq->pwqs.prev != &wq->dfl_pwq->pwqs_node),
+ "ordering guarantee broken for workqueue %s\n", wq->name);
+ return ret;
} else {
return apply_workqueue_attrs(wq, unbound_std_wq_attrs[highpri]);
}
int std_nice[NR_STD_WORKER_POOLS] = { 0, HIGHPRI_NICE_LEVEL };
int i, cpu;
- /* make sure we have enough bits for OFFQ pool ID */
- BUILD_BUG_ON((1LU << (BITS_PER_LONG - WORK_OFFQ_POOL_SHIFT)) <
- WORK_CPU_END * NR_STD_WORKER_POOLS);
-
WARN_ON(__alignof__(struct pool_workqueue) < __alignof__(long long));
pwq_cache = KMEM_CACHE(pool_workqueue, SLAB_PANIC);
}
}
- /* create default unbound wq attrs */
+ /* create default unbound and ordered wq attrs */
for (i = 0; i < NR_STD_WORKER_POOLS; i++) {
struct workqueue_attrs *attrs;
BUG_ON(!(attrs = alloc_workqueue_attrs(GFP_KERNEL)));
attrs->nice = std_nice[i];
unbound_std_wq_attrs[i] = attrs;
+
+ /*
+ * An ordered wq should have only one pwq as ordering is
+ * guaranteed by max_active which is enforced by pwqs.
+ * Turn off NUMA so that dfl_pwq is used for all nodes.
+ */
+ BUG_ON(!(attrs = alloc_workqueue_attrs(GFP_KERNEL)));
+ attrs->nice = std_nice[i];
+ attrs->no_numa = true;
+ ordered_wq_attrs[i] = attrs;
}
system_wq = alloc_workqueue("events", 0, 0);
#include <linux/export.h>
#include <linux/lockref.h>
+#include <linux/mutex.h>
#if USE_CMPXCHG_LOCKREF
# define cmpxchg64_relaxed cmpxchg64
#endif
-/*
- * Allow architectures to override the default cpu_relax() within CMPXCHG_LOOP.
- * This is useful for architectures with an expensive cpu_relax().
- */
-#ifndef arch_mutex_cpu_relax
-# define arch_mutex_cpu_relax() cpu_relax()
-#endif
-
/*
* Note that the "cmpxchg()" reloads the "old" value for the
* failure case.
__get_user(kmsg->msg_flags, &umsg->msg_flags))
return -EFAULT;
if (kmsg->msg_namelen > sizeof(struct sockaddr_storage))
- return -EINVAL;
+ kmsg->msg_namelen = sizeof(struct sockaddr_storage);
kmsg->msg_name = compat_ptr(tmp1);
kmsg->msg_iov = compat_ptr(tmp2);
kmsg->msg_control = compat_ptr(tmp3);
if (x) {
int ret;
__u8 *eth;
+ struct iphdr *iph;
+
nhead = x->props.header_len - skb_headroom(skb);
if (nhead > 0) {
ret = pskb_expand_head(skb, nhead, 0, GFP_ATOMIC);
eth = (__u8 *) skb_push(skb, ETH_HLEN);
memcpy(eth, pkt_dev->hh, 12);
*(u16 *) ð[12] = protocol;
+
+ /* Update IPv4 header len as well as checksum value */
+ iph = ip_hdr(skb);
+ iph->tot_len = htons(skb->len - ETH_HLEN);
+ ip_send_check(iph);
}
}
return 1;
static bool seq_nr_after(u16 a, u16 b)
{
/* Remove inconsistency where
- * seq_nr_after(a, b) == seq_nr_before(a, b) */
+ * seq_nr_after(a, b) == seq_nr_before(a, b)
+ */
if ((int) b - a == 32768)
return false;
[IFLA_HSR_SLAVE1] = { .type = NLA_U32 },
[IFLA_HSR_SLAVE2] = { .type = NLA_U32 },
[IFLA_HSR_MULTICAST_SPEC] = { .type = NLA_U8 },
+ [IFLA_HSR_SUPERVISION_ADDR] = { .type = NLA_BINARY, .len = ETH_ALEN },
+ [IFLA_HSR_SEQ_NR] = { .type = NLA_U16 },
};
return hsr_dev_finalize(dev, link, multicast_spec);
}
+static int hsr_fill_info(struct sk_buff *skb, const struct net_device *dev)
+{
+ struct hsr_priv *hsr_priv;
+
+ hsr_priv = netdev_priv(dev);
+
+ if (hsr_priv->slave[0])
+ if (nla_put_u32(skb, IFLA_HSR_SLAVE1, hsr_priv->slave[0]->ifindex))
+ goto nla_put_failure;
+
+ if (hsr_priv->slave[1])
+ if (nla_put_u32(skb, IFLA_HSR_SLAVE2, hsr_priv->slave[1]->ifindex))
+ goto nla_put_failure;
+
+ if (nla_put(skb, IFLA_HSR_SUPERVISION_ADDR, ETH_ALEN,
+ hsr_priv->sup_multicast_addr) ||
+ nla_put_u16(skb, IFLA_HSR_SEQ_NR, hsr_priv->sequence_nr))
+ goto nla_put_failure;
+
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
static struct rtnl_link_ops hsr_link_ops __read_mostly = {
.kind = "hsr",
.maxtype = IFLA_HSR_MAX,
.priv_size = sizeof(struct hsr_priv),
.setup = hsr_dev_setup,
.newlink = hsr_newlink,
+ .fill_info = hsr_fill_info,
};
/*
* Handle MSG_ERRQUEUE
*/
-int ip_recv_error(struct sock *sk, struct msghdr *msg, int len)
+int ip_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len)
{
struct sock_exterr_skb *serr;
struct sk_buff *skb, *skb2;
serr->addr_offset);
sin->sin_port = serr->port;
memset(&sin->sin_zero, 0, sizeof(sin->sin_zero));
+ *addr_len = sizeof(*sin);
}
memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err));
err = PTR_ERR(rt);
rt = NULL;
if (err == -ENETUNREACH)
- IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES);
+ IP_INC_STATS(net, IPSTATS_MIB_OUTNOROUTES);
goto out;
}
if (flags & MSG_ERRQUEUE) {
if (family == AF_INET) {
- return ip_recv_error(sk, msg, len);
+ return ip_recv_error(sk, msg, len, addr_len);
#if IS_ENABLED(CONFIG_IPV6)
} else if (family == AF_INET6) {
- return pingv6_ops.ipv6_recv_error(sk, msg, len);
+ return pingv6_ops.ipv6_recv_error(sk, msg, len,
+ addr_len);
#endif
}
}
const struct net_protocol __rcu *inet_protos[MAX_INET_PROTOS] __read_mostly;
const struct net_offload __rcu *inet_offloads[MAX_INET_PROTOS] __read_mostly;
-/*
- * Add a protocol handler to the hash tables
- */
-
int inet_add_protocol(const struct net_protocol *prot, unsigned char protocol)
{
if (!prot->netns_ok) {
}
EXPORT_SYMBOL(inet_add_offload);
-/*
- * Remove a protocol from the hash tables.
- */
-
int inet_del_protocol(const struct net_protocol *prot, unsigned char protocol)
{
int ret;
goto out;
if (flags & MSG_ERRQUEUE) {
- err = ip_recv_error(sk, msg, len);
+ err = ip_recv_error(sk, msg, len, addr_len);
goto out;
}
if (IS_ERR(rt)) {
err = PTR_ERR(rt);
if (err == -ENETUNREACH)
- IP_INC_STATS_BH(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
+ IP_INC_STATS(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
return err;
}
static int tcp_update_limit(struct mem_cgroup *memcg, u64 val)
{
struct cg_proto *cg_proto;
- u64 old_lim;
int i;
int ret;
if (val > RES_COUNTER_MAX)
val = RES_COUNTER_MAX;
- old_lim = res_counter_read_u64(&cg_proto->memory_allocated, RES_LIMIT);
ret = res_counter_set_limit(&cg_proto->memory_allocated, val);
if (ret)
return ret;
{
const struct iphdr *iph = skb_gro_network_header(skb);
__wsum wsum;
- __sum16 sum;
+
+ /* Don't bother verifying checksum if we're going to flush anyway. */
+ if (NAPI_GRO_CB(skb)->flush)
+ goto skip_csum;
+
+ wsum = skb->csum;
switch (skb->ip_summed) {
+ case CHECKSUM_NONE:
+ wsum = skb_checksum(skb, skb_gro_offset(skb), skb_gro_len(skb),
+ 0);
+
+ /* fall through */
+
case CHECKSUM_COMPLETE:
if (!tcp_v4_check(skb_gro_len(skb), iph->saddr, iph->daddr,
- skb->csum)) {
+ wsum)) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
break;
}
-flush:
+
NAPI_GRO_CB(skb)->flush = 1;
return NULL;
-
- case CHECKSUM_NONE:
- wsum = csum_tcpudp_nofold(iph->saddr, iph->daddr,
- skb_gro_len(skb), IPPROTO_TCP, 0);
- sum = csum_fold(skb_checksum(skb,
- skb_gro_offset(skb),
- skb_gro_len(skb),
- wsum));
- if (sum)
- goto flush;
-
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- break;
}
+skip_csum:
return tcp_gro_receive(head, skb);
}
err = PTR_ERR(rt);
rt = NULL;
if (err == -ENETUNREACH)
- IP_INC_STATS_BH(net, IPSTATS_MIB_OUTNOROUTES);
+ IP_INC_STATS(net, IPSTATS_MIB_OUTNOROUTES);
goto out;
}
struct udp_sock *up = udp_sk(sk);
int ret;
+ if (flags & MSG_SENDPAGE_NOTLAST)
+ flags |= MSG_MORE;
+
if (!up->pending) {
struct msghdr msg = { .msg_flags = flags|MSG_MORE };
bool slow;
if (flags & MSG_ERRQUEUE)
- return ip_recv_error(sk, msg, len);
+ return ip_recv_error(sk, msg, len, addr_len);
try_again:
skb = __skb_recv_datagram(sk, flags | (noblock ? MSG_DONTWAIT : 0),
/*
* Handle MSG_ERRQUEUE
*/
-int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len)
+int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct sock_exterr_skb *serr;
&sin->sin6_addr);
sin->sin6_scope_id = 0;
}
+ *addr_len = sizeof(*sin);
}
memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err));
if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) {
sin->sin6_family = AF_INET6;
sin->sin6_flowinfo = 0;
+ sin->sin6_port = 0;
if (skb->protocol == htons(ETH_P_IPV6)) {
sin->sin6_addr = ipv6_hdr(skb)->saddr;
if (np->rxopt.all)
/*
* Handle IPV6_RECVPATHMTU
*/
-int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len)
+int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len,
+ int *addr_len)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct sk_buff *skb;
sin->sin6_port = 0;
sin->sin6_scope_id = mtu_info.ip6m_addr.sin6_scope_id;
sin->sin6_addr = mtu_info.ip6m_addr.sin6_addr;
+ *addr_len = sizeof(*sin);
}
put_cmsg(msg, SOL_IPV6, IPV6_PATHMTU, sizeof(mtu_info), &mtu_info);
}
rcu_read_unlock_bh();
- IP6_INC_STATS_BH(dev_net(dst->dev),
- ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
+ IP6_INC_STATS(dev_net(dst->dev),
+ ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
kfree_skb(skb);
return -EINVAL;
}
/* Compatibility glue so we can support IPv6 when it's compiled as a module */
-static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len)
+static int dummy_ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len,
+ int *addr_len)
{
return -EAFNOSUPPORT;
}
}
EXPORT_SYMBOL(inet6_add_protocol);
-/*
- * Remove a protocol from the hash tables.
- */
-
int inet6_del_protocol(const struct inet6_protocol *prot, unsigned char protocol)
{
int ret;
return -EOPNOTSUPP;
if (flags & MSG_ERRQUEUE)
- return ipv6_recv_error(sk, msg, len);
+ return ipv6_recv_error(sk, msg, len, addr_len);
if (np->rxpmtu && np->rxopt.bits.rxpmtu)
- return ipv6_recv_rxpmtu(sk, msg, len);
+ return ipv6_recv_rxpmtu(sk, msg, len, addr_len);
skb = skb_recv_datagram(sk, flags, noblock, &err);
if (!skb)
dev_put(dev);
}
+/* Generate icmpv6 with type/code ICMPV6_DEST_UNREACH/ICMPV6_ADDR_UNREACH
+ * if sufficient data bytes are available
+ */
+static int ipip6_err_gen_icmpv6_unreach(struct sk_buff *skb)
+{
+ const struct iphdr *iph = (const struct iphdr *) skb->data;
+ struct rt6_info *rt;
+ struct sk_buff *skb2;
+
+ if (!pskb_may_pull(skb, iph->ihl * 4 + sizeof(struct ipv6hdr) + 8))
+ return 1;
+
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+
+ if (!skb2)
+ return 1;
+
+ skb_dst_drop(skb2);
+ skb_pull(skb2, iph->ihl * 4);
+ skb_reset_network_header(skb2);
+
+ rt = rt6_lookup(dev_net(skb->dev), &ipv6_hdr(skb2)->saddr, NULL, 0, 0);
+
+ if (rt && rt->dst.dev)
+ skb2->dev = rt->dst.dev;
+
+ icmpv6_send(skb2, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0);
+
+ if (rt)
+ ip6_rt_put(rt);
+
+ kfree_skb(skb2);
+
+ return 0;
+}
static int ipip6_err(struct sk_buff *skb, u32 info)
{
-
-/* All the routers (except for Linux) return only
- 8 bytes of packet payload. It means, that precise relaying of
- ICMP in the real Internet is absolutely infeasible.
- */
const struct iphdr *iph = (const struct iphdr *)skb->data;
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
case ICMP_DEST_UNREACH:
switch (code) {
case ICMP_SR_FAILED:
- case ICMP_PORT_UNREACH:
/* Impossible event. */
return 0;
default:
goto out;
err = 0;
+ if (!ipip6_err_gen_icmpv6_unreach(skb))
+ goto out;
+
if (t->parms.iph.ttl == 0 && type == ICMP_TIME_EXCEEDED)
goto out;
if (!new_skb) {
ip_rt_put(rt);
dev->stats.tx_dropped++;
- dev_kfree_skb(skb);
+ kfree_skb(skb);
return NETDEV_TX_OK;
}
if (skb->sk)
tx_error_icmp:
dst_link_failure(skb);
tx_error:
- dev_kfree_skb(skb);
+ kfree_skb(skb);
out:
dev->stats.tx_errors++;
return NETDEV_TX_OK;
tx_err:
dev->stats.tx_errors++;
- dev_kfree_skb(skb);
+ kfree_skb(skb);
return NETDEV_TX_OK;
}
{
const struct ipv6hdr *iph = skb_gro_network_header(skb);
__wsum wsum;
- __sum16 sum;
+
+ /* Don't bother verifying checksum if we're going to flush anyway. */
+ if (NAPI_GRO_CB(skb)->flush)
+ goto skip_csum;
+
+ wsum = skb->csum;
switch (skb->ip_summed) {
+ case CHECKSUM_NONE:
+ wsum = skb_checksum(skb, skb_gro_offset(skb), skb_gro_len(skb),
+ wsum);
+
+ /* fall through */
+
case CHECKSUM_COMPLETE:
if (!tcp_v6_check(skb_gro_len(skb), &iph->saddr, &iph->daddr,
- skb->csum)) {
+ wsum)) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
break;
}
-flush:
+
NAPI_GRO_CB(skb)->flush = 1;
return NULL;
-
- case CHECKSUM_NONE:
- wsum = ~csum_unfold(csum_ipv6_magic(&iph->saddr, &iph->daddr,
- skb_gro_len(skb),
- IPPROTO_TCP, 0));
- sum = csum_fold(skb_checksum(skb,
- skb_gro_offset(skb),
- skb_gro_len(skb),
- wsum));
- if (sum)
- goto flush;
-
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- break;
}
+skip_csum:
return tcp_gro_receive(head, skb);
}
bool slow;
if (flags & MSG_ERRQUEUE)
- return ipv6_recv_error(sk, msg, len);
+ return ipv6_recv_error(sk, msg, len, addr_len);
if (np->rxpmtu && np->rxopt.bits.rxpmtu)
- return ipv6_recv_rxpmtu(sk, msg, len);
+ return ipv6_recv_rxpmtu(sk, msg, len, addr_len);
try_again:
skb = __skb_recv_datagram(sk, flags | (noblock ? MSG_DONTWAIT : 0),
*addr_len = sizeof(*lsa);
if (flags & MSG_ERRQUEUE)
- return ipv6_recv_error(sk, msg, len);
+ return ipv6_recv_error(sk, msg, len, addr_len);
skb = skb_recv_datagram(sk, flags, noblock, &err);
if (!skb)
* Bit 17 is marked as already used since the VFS quota code
* also abused this API and relied on family == group ID, we
* cater to that by giving it a static family and group ID.
+ * Bit 18 is marked as already used since the PMCRAID driver
+ * did the same thing as the VFS quota code (maybe copied?)
*/
static unsigned long mc_group_start = 0x3 | BIT(GENL_ID_CTRL) |
- BIT(GENL_ID_VFS_DQUOT);
+ BIT(GENL_ID_VFS_DQUOT) |
+ BIT(GENL_ID_PMCRAID);
static unsigned long *mc_groups = &mc_group_start;
static unsigned long mc_groups_longs = 1;
for (i = 0; i <= GENL_MAX_ID - GENL_MIN_ID; i++) {
if (id_gen_idx != GENL_ID_VFS_DQUOT &&
+ id_gen_idx != GENL_ID_PMCRAID &&
!genl_family_find_byid(id_gen_idx))
return id_gen_idx;
if (++id_gen_idx > GENL_MAX_ID)
{
int first_id;
int n_groups = family->n_mcgrps;
- int err, i;
+ int err = 0, i;
bool groups_allocated = false;
if (!n_groups)
} else if (strcmp(family->name, "NET_DM") == 0) {
first_id = 1;
BUG_ON(n_groups != 1);
- } else if (strcmp(family->name, "VFS_DQUOT") == 0) {
+ } else if (family->id == GENL_ID_VFS_DQUOT) {
first_id = GENL_ID_VFS_DQUOT;
BUG_ON(n_groups != 1);
+ } else if (family->id == GENL_ID_PMCRAID) {
+ first_id = GENL_ID_PMCRAID;
+ BUG_ON(n_groups != 1);
} else {
groups_allocated = true;
err = genl_allocate_reserve_groups(n_groups, &first_id);
pkc = tx_ring ? &po->tx_ring.prb_bdqc : &po->rx_ring.prb_bdqc;
- spin_lock(&rb_queue->lock);
+ spin_lock_bh(&rb_queue->lock);
pkc->delete_blk_timer = 1;
- spin_unlock(&rb_queue->lock);
+ spin_unlock_bh(&rb_queue->lock);
prb_del_retire_blk_timer(pkc);
}
if (rnd < clg->a4) {
clg->state = 4;
return true;
- } else if (clg->a4 < rnd && rnd < clg->a1) {
+ } else if (clg->a4 < rnd && rnd < clg->a1 + clg->a4) {
clg->state = 3;
return true;
- } else if (clg->a1 < rnd)
+ } else if (clg->a1 + clg->a4 < rnd)
clg->state = 1;
break;
clg->state = 2;
if (net_random() < clg->a4)
return true;
+ break;
case 2:
if (net_random() < clg->a2)
clg->state = 1;
- if (clg->a3 > net_random())
+ if (net_random() > clg->a3)
return true;
}
#include <net/netlink.h>
#include <net/sch_generic.h>
#include <net/pkt_sched.h>
+#include <net/tcp.h>
/* Simple Token Bucket Filter.
};
+/*
+ * Return length of individual segments of a gso packet,
+ * including all headers (MAC, IP, TCP/UDP)
+ */
+static unsigned int skb_gso_seglen(const struct sk_buff *skb)
+{
+ unsigned int hdr_len = skb_transport_header(skb) - skb_mac_header(skb);
+ const struct skb_shared_info *shinfo = skb_shinfo(skb);
+
+ if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)))
+ hdr_len += tcp_hdrlen(skb);
+ else
+ hdr_len += sizeof(struct udphdr);
+ return hdr_len + shinfo->gso_size;
+}
+
/* GSO packet is too big, segment it so that tbf can transmit
* each segment in time
*/
while (segs) {
nskb = segs->next;
segs->next = NULL;
- if (likely(segs->len <= q->max_size)) {
- qdisc_skb_cb(segs)->pkt_len = segs->len;
- ret = qdisc_enqueue(segs, q->qdisc);
- } else {
- ret = qdisc_reshape_fail(skb, sch);
- }
+ qdisc_skb_cb(segs)->pkt_len = segs->len;
+ ret = qdisc_enqueue(segs, q->qdisc);
if (ret != NET_XMIT_SUCCESS) {
if (net_xmit_drop_count(ret))
sch->qstats.drops++;
int ret;
if (qdisc_pkt_len(skb) > q->max_size) {
- if (skb_is_gso(skb))
+ if (skb_is_gso(skb) && skb_gso_seglen(skb) <= q->max_size)
return tbf_segment(skb, sch);
return qdisc_reshape_fail(skb, sch);
}
if (max_size < 0)
goto done;
+ if (max_size < psched_mtu(qdisc_dev(sch)))
+ pr_warn_ratelimited("sch_tbf: burst %u is lower than device %s mtu (%u) !\n",
+ max_size, qdisc_dev(sch)->name,
+ psched_mtu(qdisc_dev(sch)));
+
if (q->qdisc != &noop_qdisc) {
err = fifo_set_limit(q->qdisc, qopt->limit);
if (err)
* for a given destination transport address.
*/
- if (!tp->rto_pending) {
+ if (!chunk->resent && !tp->rto_pending) {
chunk->rtt_in_progress = 1;
tp->rto_pending = 1;
}
+
has_data = 1;
}
transport->rto_pending = 0;
}
+ chunk->resent = 1;
+
/* Move the chunk to the retransmit queue. The chunks
* on the retransmit queue are always kept in order.
*/
* instance).
*/
if (!tchunk->tsn_gap_acked &&
+ !tchunk->resent &&
tchunk->rtt_in_progress) {
tchunk->rtt_in_progress = 0;
rtt = jiffies - tchunk->sent_at;
*/
if (!tchunk->tsn_gap_acked) {
tchunk->tsn_gap_acked = 1;
- *highest_new_tsn_in_sack = tsn;
+ if (TSN_lt(*highest_new_tsn_in_sack, tsn))
+ *highest_new_tsn_in_sack = tsn;
bytes_acked += sctp_data_size(tchunk);
if (!tchunk->transport)
migrate_bytes += sctp_data_size(tchunk);
if (copy_from_user(kmsg, umsg, sizeof(struct msghdr)))
return -EFAULT;
if (kmsg->msg_namelen > sizeof(struct sockaddr_storage))
- return -EINVAL;
+ kmsg->msg_namelen = sizeof(struct sockaddr_storage);
return 0;
}
static int
gss_refresh_null(struct rpc_task *task)
{
- return -EACCES;
+ return 0;
}
static __be32 *
} elsif ($arch eq "blackfin") {
$mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s__mcount\$";
$mcount_adjust = -4;
-} elsif ($arch eq "tilegx") {
+} elsif ($arch eq "tilegx" || $arch eq "tile") {
+ # Default to the newer TILE-Gx architecture if only "tile" is given.
$mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s__mcount\$";
$type = ".quad";
$alignment = 8;
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/err.h>
-#include <linux/sched.h>
#include <linux/rbtree.h>
-#include <linux/cred.h>
#include <linux/key-type.h>
#include <linux/digsig.h>
static struct key *keyring[INTEGRITY_KEYRING_MAX];
-#ifdef CONFIG_IMA_TRUSTED_KEYRING
-static const char *keyring_name[INTEGRITY_KEYRING_MAX] = {
- ".evm",
- ".module",
- ".ima",
-};
-#else
static const char *keyring_name[INTEGRITY_KEYRING_MAX] = {
"_evm",
"_module",
"_ima",
};
-#endif
int integrity_digsig_verify(const unsigned int id, const char *sig, int siglen,
const char *digest, int digestlen)
if (!keyring[id]) {
keyring[id] =
- request_key(&key_type_keyring, keyring_name[id], NULL);
+ request_key(&key_type_keyring, keyring_name[id], NULL);
if (IS_ERR(keyring[id])) {
int err = PTR_ERR(keyring[id]);
pr_err("no %s keyring: %d\n", keyring_name[id], err);
return -EOPNOTSUPP;
}
-
-int integrity_init_keyring(const unsigned int id)
-{
- const struct cred *cred = current_cred();
- const struct user_struct *user = cred->user;
-
- keyring[id] = keyring_alloc(keyring_name[id], KUIDT_INIT(0),
- KGIDT_INIT(0), cred,
- ((KEY_POS_ALL & ~KEY_POS_SETATTR) |
- KEY_USR_VIEW | KEY_USR_READ),
- KEY_ALLOC_NOT_IN_QUOTA, user->uid_keyring);
- if (!IS_ERR(keyring[id]))
- set_bit(KEY_FLAG_TRUSTED_ONLY, &keyring[id]->flags);
- else
- pr_info("Can't allocate %s keyring (%ld)\n",
- keyring_name[id], PTR_ERR(keyring[id]));
- return 0;
-}
For more information on integrity appraisal refer to:
<http://linux-ima.sourceforge.net>
If unsure, say N.
-
-config IMA_TRUSTED_KEYRING
- bool "Require all keys on the _ima keyring be signed"
- depends on IMA_APPRAISE && SYSTEM_TRUSTED_KEYRING
- default y
- help
- This option requires that all keys added to the _ima
- keyring be signed by a key on the system trusted keyring.
#include "../integrity.h"
-enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_ASCII };
+enum ima_show_type { IMA_SHOW_BINARY, IMA_SHOW_BINARY_NO_FIELD_LEN,
+ IMA_SHOW_ASCII };
enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8 };
/* digest size for IMA, fits SHA1 or MD5 */
const char *op, struct inode *inode,
const unsigned char *filename);
int ima_calc_file_hash(struct file *file, struct ima_digest_data *hash);
-int ima_calc_field_array_hash(struct ima_field_data *field_data, int num_fields,
+int ima_calc_field_array_hash(struct ima_field_data *field_data,
+ struct ima_template_desc *desc, int num_fields,
struct ima_digest_data *hash);
int __init ima_calc_boot_aggregate(struct ima_digest_data *hash);
void ima_add_violation(struct file *file, const unsigned char *filename,
int xattr_len, struct ima_template_entry **entry);
int ima_store_template(struct ima_template_entry *entry, int violation,
struct inode *inode, const unsigned char *filename);
+void ima_free_template_entry(struct ima_template_entry *entry);
const char *ima_d_path(struct path *path, char **pathbuf);
/* rbtree tree calls to lookup, insert, delete
#include <crypto/hash_info.h>
#include "ima.h"
+/*
+ * ima_free_template_entry - free an existing template entry
+ */
+void ima_free_template_entry(struct ima_template_entry *entry)
+{
+ int i;
+
+ for (i = 0; i < entry->template_desc->num_fields; i++)
+ kfree(entry->template_data[i].data);
+
+ kfree(entry);
+}
+
/*
* ima_alloc_init_template - create and initialize a new template entry
*/
if (!*entry)
return -ENOMEM;
+ (*entry)->template_desc = template_desc;
for (i = 0; i < template_desc->num_fields; i++) {
struct ima_template_field *field = template_desc->fields[i];
u32 len;
(*entry)->template_data_len += sizeof(len);
(*entry)->template_data_len += len;
}
- (*entry)->template_desc = template_desc;
return 0;
out:
- kfree(*entry);
+ ima_free_template_entry(*entry);
*entry = NULL;
return result;
}
/* this function uses default algo */
hash.hdr.algo = HASH_ALGO_SHA1;
result = ima_calc_field_array_hash(&entry->template_data[0],
+ entry->template_desc,
num_fields, &hash.hdr);
if (result < 0) {
integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode,
}
result = ima_store_template(entry, violation, inode, filename);
if (result < 0)
- kfree(entry);
+ ima_free_template_entry(entry);
err_out:
integrity_audit_msg(AUDIT_INTEGRITY_PCR, inode, filename,
op, cause, result, 0);
if (!result || result == -EEXIST)
iint->flags |= IMA_MEASURED;
if (result < 0)
- kfree(entry);
+ ima_free_template_entry(entry);
}
void ima_audit_measurement(struct integrity_iint_cache *iint,
}
return result;
}
-
-#ifdef CONFIG_IMA_TRUSTED_KEYRING
-static int __init init_ima_keyring(void)
-{
- int ret;
-
- ret = integrity_init_keyring(INTEGRITY_KEYRING_IMA);
- return 0;
-}
-late_initcall(init_ima_keyring);
-#endif
* Calculate the hash of template data
*/
static int ima_calc_field_array_hash_tfm(struct ima_field_data *field_data,
+ struct ima_template_desc *td,
int num_fields,
struct ima_digest_data *hash,
struct crypto_shash *tfm)
return rc;
for (i = 0; i < num_fields; i++) {
- rc = crypto_shash_update(&desc.shash,
- (const u8 *) &field_data[i].len,
- sizeof(field_data[i].len));
+ if (strcmp(td->name, IMA_TEMPLATE_IMA_NAME) != 0) {
+ rc = crypto_shash_update(&desc.shash,
+ (const u8 *) &field_data[i].len,
+ sizeof(field_data[i].len));
+ if (rc)
+ break;
+ }
rc = crypto_shash_update(&desc.shash, field_data[i].data,
field_data[i].len);
if (rc)
return rc;
}
-int ima_calc_field_array_hash(struct ima_field_data *field_data, int num_fields,
+int ima_calc_field_array_hash(struct ima_field_data *field_data,
+ struct ima_template_desc *desc, int num_fields,
struct ima_digest_data *hash)
{
struct crypto_shash *tfm;
if (IS_ERR(tfm))
return PTR_ERR(tfm);
- rc = ima_calc_field_array_hash_tfm(field_data, num_fields, hash, tfm);
+ rc = ima_calc_field_array_hash_tfm(field_data, desc, num_fields,
+ hash, tfm);
ima_free_tfm(tfm);
struct ima_template_entry *e;
int namelen;
u32 pcr = CONFIG_IMA_MEASURE_PCR_IDX;
+ bool is_ima_template = false;
int i;
/* get entry */
ima_putc(m, e->template_desc->name, namelen);
/* 5th: template length (except for 'ima' template) */
- if (strcmp(e->template_desc->name, IMA_TEMPLATE_IMA_NAME) != 0)
+ if (strcmp(e->template_desc->name, IMA_TEMPLATE_IMA_NAME) == 0)
+ is_ima_template = true;
+
+ if (!is_ima_template)
ima_putc(m, &e->template_data_len,
sizeof(e->template_data_len));
/* 6th: template specific data */
for (i = 0; i < e->template_desc->num_fields; i++) {
- e->template_desc->fields[i]->field_show(m, IMA_SHOW_BINARY,
- &e->template_data[i]);
+ enum ima_show_type show = IMA_SHOW_BINARY;
+ struct ima_template_field *field = e->template_desc->fields[i];
+
+ if (is_ima_template && strcmp(field->field_id, "d") == 0)
+ show = IMA_SHOW_BINARY_NO_FIELD_LEN;
+ field->field_show(m, show, &e->template_data[i]);
}
return 0;
}
result = ima_calc_boot_aggregate(&hash.hdr);
if (result < 0) {
audit_cause = "hashing_error";
- kfree(entry);
goto err_out;
}
}
result = ima_store_template(entry, violation, NULL,
boot_aggregate_name);
if (result < 0)
- kfree(entry);
+ ima_free_template_entry(entry);
return;
err_out:
integrity_audit_msg(AUDIT_INTEGRITY_PCR, NULL, boot_aggregate_name, op,
return NULL;
}
-static int template_fmt_size(char *template_fmt)
+static int template_fmt_size(const char *template_fmt)
{
char c;
int template_fmt_len = strlen(template_fmt);
return j + 1;
}
-static int template_desc_init_fields(char *template_fmt,
+static int template_desc_init_fields(const char *template_fmt,
struct ima_template_field ***fields,
int *num_fields)
{
- char *c, *template_fmt_ptr = template_fmt;
+ char *c, *template_fmt_copy, *template_fmt_ptr;
int template_num_fields = template_fmt_size(template_fmt);
int i, result = 0;
if (template_num_fields > IMA_TEMPLATE_NUM_FIELDS_MAX)
return -EINVAL;
+ /* copying is needed as strsep() modifies the original buffer */
+ template_fmt_copy = kstrdup(template_fmt, GFP_KERNEL);
+ if (template_fmt_copy == NULL)
+ return -ENOMEM;
+
*fields = kzalloc(template_num_fields * sizeof(*fields), GFP_KERNEL);
if (*fields == NULL) {
result = -ENOMEM;
goto out;
}
+
+ template_fmt_ptr = template_fmt_copy;
for (i = 0; (c = strsep(&template_fmt_ptr, "|")) != NULL &&
i < template_num_fields; i++) {
struct ima_template_field *f = lookup_template_field(c);
(*fields)[i] = f;
}
*num_fields = i;
- return 0;
out:
- kfree(*fields);
- *fields = NULL;
+ if (result < 0) {
+ kfree(*fields);
+ *fields = NULL;
+ }
+ kfree(template_fmt_copy);
return result;
}
enum data_formats datafmt,
struct ima_field_data *field_data)
{
- ima_putc(m, &field_data->len, sizeof(u32));
+ if (show != IMA_SHOW_BINARY_NO_FIELD_LEN)
+ ima_putc(m, &field_data->len, sizeof(u32));
+
if (!field_data->len)
return;
+
ima_putc(m, field_data->data, field_data->len);
}
ima_show_template_data_ascii(m, show, datafmt, field_data);
break;
case IMA_SHOW_BINARY:
+ case IMA_SHOW_BINARY_NO_FIELD_LEN:
ima_show_template_data_binary(m, show, datafmt, field_data);
break;
default:
#ifdef CONFIG_INTEGRITY_ASYMMETRIC_KEYS
int asymmetric_verify(struct key *keyring, const char *sig,
int siglen, const char *data, int datalen);
-
-int integrity_init_keyring(const unsigned int id);
#else
static inline int asymmetric_verify(struct key *keyring, const char *sig,
int siglen, const char *data, int datalen)
{
return -EOPNOTSUPP;
}
-
-static int integrity_init_keyring(const unsigned int id)
-{
- return 0;
-}
#endif
#ifdef CONFIG_INTEGRITY_AUDIT
if (new_rate < 0)
break;
/* make sure we are below the ABDAC clock */
- if (new_rate <= clk_get_rate(dac->pclk)) {
+ if (index < MAX_NUM_RATES &&
+ new_rate <= clk_get_rate(dac->pclk)) {
dac->rates[index] = new_rate / 256;
index++;
}
return;
index = s->packet_index;
+ /* this module generate empty packet for 'no data' */
syt = calculate_syt(s, cycle);
- if (!(s->flags & CIP_BLOCKING)) {
+ if (!(s->flags & CIP_BLOCKING))
data_blocks = calculate_data_blocks(s);
- } else {
- if (syt != 0xffff) {
- data_blocks = s->syt_interval;
- } else {
- data_blocks = 0;
- syt = 0xffffff;
- }
- }
+ else if (syt != 0xffff)
+ data_blocks = s->syt_interval;
+ else
+ data_blocks = 0;
buffer = s->buffer.packets[index].buffer;
buffer[0] = cpu_to_be32(ACCESS_ONCE(s->source_node_id_field) |
if (dice_proc_read_mem(dice, &tx_rx_header, sections[2], 2) < 0)
return;
- quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.tx));
+ quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.tx) / 4);
for (stream = 0; stream < tx_rx_header.number; ++stream) {
if (dice_proc_read_mem(dice, &buf.tx, sections[2] + 2 +
stream * tx_rx_header.size,
if (dice_proc_read_mem(dice, &tx_rx_header, sections[4], 2) < 0)
return;
- quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.rx));
+ quadlets = min_t(u32, tx_rx_header.size, sizeof(buf.rx) / 4);
for (stream = 0; stream < tx_rx_header.number; ++stream) {
if (dice_proc_read_mem(dice, &buf.rx, sections[4] + 2 +
stream * tx_rx_header.size,
unsigned int in_reset:1; /* during reset operation */
unsigned int power_keep_link_on:1; /* don't power off HDA link */
unsigned int no_response_fallback:1; /* don't fallback at RIRB error */
- unsigned int avoid_link_reset:1; /* don't reset link at runtime PM */
int primary_dig_out_type; /* primary digital out PCM type */
};
for (i = 0; i < num_pins; i++) {
hda_nid_t pin = pins[i];
- if (pin == spec->hp_mic_pin) {
- int ret = create_hp_mic_jack_mode(codec, pin);
- if (ret < 0)
- return ret;
+ if (pin == spec->hp_mic_pin)
continue;
- }
if (get_out_jack_num_items(codec, pin) > 1) {
struct snd_kcontrol_new *knew;
char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
val &= ~(AC_PINCTL_VREFEN | PIN_HP);
val |= get_vref_idx(vref_caps, idx) | PIN_IN;
} else
- val = snd_hda_get_default_vref(codec, nid);
+ val = snd_hda_get_default_vref(codec, nid) | PIN_IN;
}
snd_hda_set_pin_ctl_cache(codec, nid, val);
call_hp_automute(codec, NULL);
struct hda_gen_spec *spec = codec->spec;
struct snd_kcontrol_new *knew;
- if (get_out_jack_num_items(codec, pin) <= 1 &&
- get_in_jack_num_items(codec, pin) <= 1)
- return 0; /* no need */
knew = snd_hda_gen_add_kctl(spec, "Headphone Mic Jack Mode",
&hp_mic_jack_mode_enum);
if (!knew)
return 0;
}
+/* return true if either a volume or a mute amp is found for the given
+ * aamix path; the amp has to be either in the mixer node or its direct leaf
+ */
+static bool look_for_mix_leaf_ctls(struct hda_codec *codec, hda_nid_t mix_nid,
+ hda_nid_t pin, unsigned int *mix_val,
+ unsigned int *mute_val)
+{
+ int idx, num_conns;
+ const hda_nid_t *list;
+ hda_nid_t nid;
+
+ idx = snd_hda_get_conn_index(codec, mix_nid, pin, true);
+ if (idx < 0)
+ return false;
+
+ *mix_val = *mute_val = 0;
+ if (nid_has_volume(codec, mix_nid, HDA_INPUT))
+ *mix_val = HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT);
+ if (nid_has_mute(codec, mix_nid, HDA_INPUT))
+ *mute_val = HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT);
+ if (*mix_val && *mute_val)
+ return true;
+
+ /* check leaf node */
+ num_conns = snd_hda_get_conn_list(codec, mix_nid, &list);
+ if (num_conns < idx)
+ return false;
+ nid = list[idx];
+ if (!*mix_val && nid_has_volume(codec, nid, HDA_OUTPUT))
+ *mix_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
+ if (!*mute_val && nid_has_mute(codec, nid, HDA_OUTPUT))
+ *mute_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
+
+ return *mix_val || *mute_val;
+}
+
/* create input playback/capture controls for the given pin */
static int new_analog_input(struct hda_codec *codec, int input_idx,
hda_nid_t pin, const char *ctlname, int ctlidx,
{
struct hda_gen_spec *spec = codec->spec;
struct nid_path *path;
- unsigned int val;
+ unsigned int mix_val, mute_val;
int err, idx;
- if (!nid_has_volume(codec, mix_nid, HDA_INPUT) &&
- !nid_has_mute(codec, mix_nid, HDA_INPUT))
- return 0; /* no need for analog loopback */
+ if (!look_for_mix_leaf_ctls(codec, mix_nid, pin, &mix_val, &mute_val))
+ return 0;
path = snd_hda_add_new_path(codec, pin, mix_nid, 0);
if (!path)
spec->loopback_paths[input_idx] = snd_hda_get_path_idx(codec, path);
idx = path->idx[path->depth - 1];
- if (nid_has_volume(codec, mix_nid, HDA_INPUT)) {
- val = HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT);
- err = __add_pb_vol_ctrl(spec, HDA_CTL_WIDGET_VOL, ctlname, ctlidx, val);
+ if (mix_val) {
+ err = __add_pb_vol_ctrl(spec, HDA_CTL_WIDGET_VOL, ctlname, ctlidx, mix_val);
if (err < 0)
return err;
- path->ctls[NID_PATH_VOL_CTL] = val;
+ path->ctls[NID_PATH_VOL_CTL] = mix_val;
}
- if (nid_has_mute(codec, mix_nid, HDA_INPUT)) {
- val = HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT);
- err = __add_pb_sw_ctrl(spec, HDA_CTL_WIDGET_MUTE, ctlname, ctlidx, val);
+ if (mute_val) {
+ err = __add_pb_sw_ctrl(spec, HDA_CTL_WIDGET_MUTE, ctlname, ctlidx, mute_val);
if (err < 0)
return err;
- path->ctls[NID_PATH_MUTE_CTL] = val;
+ path->ctls[NID_PATH_MUTE_CTL] = mute_val;
}
path->active = true;
if (err < 0)
return err;
+ /* create "Headphone Mic Jack Mode" if no input selection is
+ * available (or user specifies add_jack_modes hint)
+ */
+ if (spec->hp_mic_pin &&
+ (spec->auto_mic || spec->input_mux.num_items == 1 ||
+ spec->add_jack_modes)) {
+ err = create_hp_mic_jack_mode(codec, spec->hp_mic_pin);
+ if (err < 0)
+ return err;
+ }
+
if (spec->add_jack_modes) {
if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) {
err = create_out_jack_modes(codec, cfg->line_outs,
STATESTS_INT_MASK);
azx_stop_chip(chip);
- if (!chip->bus->avoid_link_reset)
- azx_enter_link_reset(chip);
+ azx_enter_link_reset(chip);
azx_clear_irq_pending(chip);
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
hda_display_power(false);
}
dev++;
- complete_all(&chip->probe_wait);
+ if (chip->disabled)
+ complete_all(&chip->probe_wait);
return 0;
out_free:
if ((chip->driver_caps & AZX_DCAPS_PM_RUNTIME) || chip->use_vga_switcheroo)
pm_runtime_put_noidle(&pci->dev);
- return 0;
-
out_free:
- chip->init_failed = 1;
+ if (err < 0)
+ chip->init_failed = 1;
+ complete_all(&chip->probe_wait);
return err;
}
if (!spec->eapd_nid)
return;
+ if (codec->inv_eapd)
+ enabled = !enabled;
snd_hda_codec_update_cache(codec, spec->eapd_nid, 0,
AC_VERB_SET_EAPD_BTLENABLE,
enabled ? 0x02 : 0x00);
*/
spec->gen.multiout.no_share_stream = 1;
+ /* AD1986A can't manage the dynamic pin on/off smoothly */
+ spec->gen.auto_mute_via_amp = 1;
+
snd_hda_pick_fixup(codec, ad1986a_fixup_models, ad1986a_fixup_tbl,
ad1986a_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
switch (action) {
case HDA_FIXUP_ACT_PRE_PROBE:
spec->gen.vmaster_mute.hook = ad1884_vmaster_hp_gpio_hook;
+ spec->gen.own_eapd_ctl = 1;
snd_hda_sequence_write_cache(codec, gpio_init_verbs);
break;
case HDA_FIXUP_ACT_PROBE:
#if IS_ENABLED(CONFIG_THINKPAD_ACPI)
#include <linux/thinkpad_acpi.h>
+#include <acpi/acpi.h>
static int (*led_set_func)(int, bool);
+static acpi_status acpi_check_cb(acpi_handle handle, u32 lvl, void *context,
+ void **rv)
+{
+ bool *found = context;
+ *found = true;
+ return AE_OK;
+}
+
+static bool is_thinkpad(struct hda_codec *codec)
+{
+ bool found = false;
+ if (codec->subsystem_id >> 16 != 0x17aa)
+ return false;
+ if (ACPI_SUCCESS(acpi_get_devices("LEN0068", acpi_check_cb, &found, NULL)) && found)
+ return true;
+ found = false;
+ return ACPI_SUCCESS(acpi_get_devices("IBM0068", acpi_check_cb, &found, NULL)) && found;
+}
+
static void update_tpacpi_mute_led(void *private_data, int enabled)
{
struct hda_codec *codec = private_data;
bool removefunc = false;
if (action == HDA_FIXUP_ACT_PROBE) {
+ if (!is_thinkpad(codec))
+ return;
if (!led_set_func)
led_set_func = symbol_request(tpacpi_led_set);
if (!led_set_func) {
SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
+ SND_PCI_QUIRK_VENDOR(0x17aa, "Thinkpad", CXT_FIXUP_THINKPAD_ACPI),
SND_PCI_QUIRK(0x1c06, 0x2011, "Lemote A1004", CXT_PINCFG_LEMOTE_A1004),
SND_PCI_QUIRK(0x1c06, 0x2012, "Lemote A1205", CXT_PINCFG_LEMOTE_A1205),
{}
static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll);
-static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
+static void jack_callback(struct hda_codec *codec, struct hda_jack_tbl *jack)
{
struct hdmi_spec *spec = codec->spec;
+ int pin_idx = pin_nid_to_pin_index(spec, jack->nid);
+ if (pin_idx < 0)
+ return;
+
+ if (hdmi_present_sense(get_pin(spec, pin_idx), 1))
+ snd_hda_jack_report_sync(codec);
+}
+
+static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
+{
int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
- int pin_nid;
- int pin_idx;
struct hda_jack_tbl *jack;
int dev_entry = (res & AC_UNSOL_RES_DE) >> AC_UNSOL_RES_DE_SHIFT;
jack = snd_hda_jack_tbl_get_from_tag(codec, tag);
if (!jack)
return;
- pin_nid = jack->nid;
jack->jack_dirty = 1;
_snd_printd(SND_PR_VERBOSE,
"HDMI hot plug event: Codec=%d Pin=%d Device=%d Inactive=%d Presence_Detect=%d ELD_Valid=%d\n",
- codec->addr, pin_nid, dev_entry, !!(res & AC_UNSOL_RES_IA),
+ codec->addr, jack->nid, dev_entry, !!(res & AC_UNSOL_RES_IA),
!!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV));
- pin_idx = pin_nid_to_pin_index(spec, pin_nid);
- if (pin_idx < 0)
- return;
-
- if (hdmi_present_sense(get_pin(spec, pin_idx), 1))
- snd_hda_jack_report_sync(codec);
+ jack_callback(codec, jack);
}
static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
hda_nid_t pin_nid = per_pin->pin_nid;
hdmi_init_pin(codec, pin_nid);
- snd_hda_jack_detect_enable(codec, pin_nid, pin_nid);
+ snd_hda_jack_detect_enable_callback(codec, pin_nid, pin_nid,
+ codec->jackpoll_interval > 0 ? jack_callback : NULL);
}
return 0;
}
ALC889_FIXUP_DAC_ROUTE,
ALC889_FIXUP_MBP_VREF,
ALC889_FIXUP_IMAC91_VREF,
+ ALC889_FIXUP_MBA21_VREF,
ALC882_FIXUP_INV_DMIC,
ALC882_FIXUP_NO_PRIMARY_HP,
+ ALC887_FIXUP_ASUS_BASS,
+ ALC887_FIXUP_BASS_CHMAP,
};
static void alc889_fixup_coef(struct hda_codec *codec,
}
}
-/* Set VREF on speaker pins on imac91 */
-static void alc889_fixup_imac91_vref(struct hda_codec *codec,
- const struct hda_fixup *fix, int action)
+static void alc889_fixup_mac_pins(struct hda_codec *codec,
+ const hda_nid_t *nids, int num_nids)
{
struct alc_spec *spec = codec->spec;
- static hda_nid_t nids[2] = { 0x18, 0x1a };
int i;
- if (action != HDA_FIXUP_ACT_INIT)
- return;
- for (i = 0; i < ARRAY_SIZE(nids); i++) {
+ for (i = 0; i < num_nids; i++) {
unsigned int val;
val = snd_hda_codec_get_pin_target(codec, nids[i]);
val |= AC_PINCTL_VREF_50;
spec->gen.keep_vref_in_automute = 1;
}
+/* Set VREF on speaker pins on imac91 */
+static void alc889_fixup_imac91_vref(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ static hda_nid_t nids[2] = { 0x18, 0x1a };
+
+ if (action == HDA_FIXUP_ACT_INIT)
+ alc889_fixup_mac_pins(codec, nids, ARRAY_SIZE(nids));
+}
+
+/* Set VREF on speaker pins on mba21 */
+static void alc889_fixup_mba21_vref(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ static hda_nid_t nids[2] = { 0x18, 0x19 };
+
+ if (action == HDA_FIXUP_ACT_INIT)
+ alc889_fixup_mac_pins(codec, nids, ARRAY_SIZE(nids));
+}
+
/* Don't take HP output as primary
* Strangely, the speaker output doesn't work on Vaio Z and some Vaio
* all-in-one desktop PCs (for example VGC-LN51JGB) through DAC 0x05
}
}
+static void alc_fixup_bass_chmap(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action);
+
static const struct hda_fixup alc882_fixups[] = {
[ALC882_FIXUP_ABIT_AW9D_MAX] = {
.type = HDA_FIXUP_PINS,
.chained = true,
.chain_id = ALC882_FIXUP_GPIO1,
},
+ [ALC889_FIXUP_MBA21_VREF] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc889_fixup_mba21_vref,
+ .chained = true,
+ .chain_id = ALC889_FIXUP_MBP_VREF,
+ },
[ALC882_FIXUP_INV_DMIC] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc_fixup_inv_dmic_0x12,
.type = HDA_FIXUP_FUNC,
.v.func = alc882_fixup_no_primary_hp,
},
+ [ALC887_FIXUP_ASUS_BASS] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ {0x16, 0x99130130}, /* bass speaker */
+ {}
+ },
+ .chained = true,
+ .chain_id = ALC887_FIXUP_BASS_CHMAP,
+ },
+ [ALC887_FIXUP_BASS_CHMAP] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc_fixup_bass_chmap,
+ },
};
static const struct snd_pci_quirk alc882_fixup_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x1873, "ASUS W90V", ALC882_FIXUP_ASUS_W90V),
SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_FIXUP_ASUS_W2JC),
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_FIXUP_EEE1601),
+ SND_PCI_QUIRK(0x1043, 0x84bc, "ASUS ET2700", ALC887_FIXUP_ASUS_BASS),
SND_PCI_QUIRK(0x104d, 0x9047, "Sony Vaio TT", ALC889_FIXUP_VAIO_TT),
SND_PCI_QUIRK(0x104d, 0x905a, "Sony Vaio Z", ALC882_FIXUP_NO_PRIMARY_HP),
SND_PCI_QUIRK(0x104d, 0x9043, "Sony Vaio VGC-LN51JGB", ALC882_FIXUP_NO_PRIMARY_HP),
SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x3200, "iMac 7,1 Aluminum", ALC882_FIXUP_EAPD),
SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC889_FIXUP_MBP_VREF),
- SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC889_FIXUP_MBP_VREF),
+ SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC889_FIXUP_MBA21_VREF),
SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_FIXUP_MACPRO_GPIO),
alc_write_coef_idx(codec, 0x18, 0x7388);
break;
case 0x10ec0668:
+ alc_write_coef_idx(codec, 0x11, 0x0001);
alc_write_coef_idx(codec, 0x15, 0x0d60);
alc_write_coef_idx(codec, 0xc3, 0x0000);
break;
alc_write_coef_idx(codec, 0x18, 0x7388);
break;
case 0x10ec0668:
+ alc_write_coef_idx(codec, 0x11, 0x0001);
alc_write_coef_idx(codec, 0x15, 0x0d50);
alc_write_coef_idx(codec, 0xc3, 0x0000);
break;
vref);
}
-static void alc283_chromebook_caps(struct hda_codec *codec)
-{
- snd_hda_override_wcaps(codec, 0x03, 0);
-}
-
static void alc283_fixup_chromebook(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
switch (action) {
case HDA_FIXUP_ACT_PRE_PROBE:
- alc283_chromebook_caps(codec);
+ snd_hda_override_wcaps(codec, 0x03, 0);
/* Disable AA-loopback as it causes white noise */
spec->gen.mixer_nid = 0;
+ break;
+ case HDA_FIXUP_ACT_INIT:
+ /* Enable Line1 input control by verb */
+ val = alc_read_coef_idx(codec, 0x1a);
+ alc_write_coef_idx(codec, 0x1a, val | (1 << 4));
+ break;
+ }
+}
+
+static void alc283_fixup_sense_combo_jack(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ struct alc_spec *spec = codec->spec;
+ int val;
+
+ switch (action) {
+ case HDA_FIXUP_ACT_PRE_PROBE:
spec->gen.hp_automute_hook = alc283_hp_automute_hook;
break;
case HDA_FIXUP_ACT_INIT:
/* Set to manual mode */
val = alc_read_coef_idx(codec, 0x06);
alc_write_coef_idx(codec, 0x06, val & ~0x000c);
- /* Enable Line1 input control by verb */
- val = alc_read_coef_idx(codec, 0x1a);
- alc_write_coef_idx(codec, 0x1a, val | (1 << 4));
break;
}
}
ALC271_FIXUP_HP_GATE_MIC_JACK,
ALC269_FIXUP_ACER_AC700,
ALC269_FIXUP_LIMIT_INT_MIC_BOOST,
+ ALC269VB_FIXUP_ASUS_ZENBOOK,
ALC269_FIXUP_LIMIT_INT_MIC_BOOST_MUTE_LED,
ALC269VB_FIXUP_ORDISSIMO_EVE2,
ALC283_FIXUP_CHROME_BOOK,
+ ALC283_FIXUP_SENSE_COMBO_JACK,
ALC282_FIXUP_ASUS_TX300,
ALC283_FIXUP_INT_MIC,
ALC290_FIXUP_MONO_SPEAKERS,
.chained = true,
.chain_id = ALC269_FIXUP_THINKPAD_ACPI,
},
+ [ALC269VB_FIXUP_ASUS_ZENBOOK] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc269_fixup_limit_int_mic_boost,
+ .chained = true,
+ .chain_id = ALC269VB_FIXUP_DMIC,
+ },
[ALC269_FIXUP_LIMIT_INT_MIC_BOOST_MUTE_LED] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc269_fixup_limit_int_mic_boost,
.type = HDA_FIXUP_FUNC,
.v.func = alc283_fixup_chromebook,
},
+ [ALC283_FIXUP_SENSE_COMBO_JACK] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc283_fixup_sense_combo_jack,
+ .chained = true,
+ .chain_id = ALC283_FIXUP_CHROME_BOOK,
+ },
[ALC282_FIXUP_ASUS_TX300] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc282_fixup_asus_tx300,
SND_PCI_QUIRK(0x1028, 0x0614, "Dell Inspiron 3135", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0616, "Dell Vostro 5470", ALC290_FIXUP_MONO_SPEAKERS),
SND_PCI_QUIRK(0x1028, 0x061f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x0638, "Dell Inspiron 5439", ALC290_FIXUP_MONO_SPEAKERS),
SND_PCI_QUIRK(0x1028, 0x063f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1973, "HP Pavilion", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x1983, "HP Pavilion", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x218b, "HP", ALC269_FIXUP_LIMIT_INT_MIC_BOOST_MUTE_LED),
- SND_PCI_QUIRK(0x103c, 0x21ed, "HP Falco Chromebook", ALC283_FIXUP_CHROME_BOOK),
SND_PCI_QUIRK_VENDOR(0x103c, "HP", ALC269_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300),
SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x1043, 0x115d, "Asus 1015E", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
- SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_DMIC),
- SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_DMIC),
+ SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
+ SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK),
SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC),
{.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"},
{.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"},
{.id = ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, .name = "dell-headset-dock"},
+ {.id = ALC283_FIXUP_CHROME_BOOK, .name = "alc283-chrome"},
+ {.id = ALC283_FIXUP_SENSE_COMBO_JACK, .name = "alc283-sense-combo"},
{}
};
ALC861_FIXUP_AMP_VREF_0F,
ALC861_FIXUP_NO_JACK_DETECT,
ALC861_FIXUP_ASUS_A6RP,
+ ALC660_FIXUP_ASUS_W7J,
};
/* On some laptops, VREF of pin 0x0f is abused for controlling the main amp */
.v.func = alc861_fixup_asus_amp_vref_0f,
.chained = true,
.chain_id = ALC861_FIXUP_NO_JACK_DETECT,
+ },
+ [ALC660_FIXUP_ASUS_W7J] = {
+ .type = HDA_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+ /* ASUS W7J needs a magic pin setup on unused NID 0x10
+ * for enabling outputs
+ */
+ {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ { }
+ },
}
};
static const struct snd_pci_quirk alc861_fixup_tbl[] = {
+ SND_PCI_QUIRK(0x1043, 0x1253, "ASUS W7J", ALC660_FIXUP_ASUS_W7J),
+ SND_PCI_QUIRK(0x1043, 0x1263, "ASUS Z35HL", ALC660_FIXUP_ASUS_W7J),
SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", ALC861_FIXUP_ASUS_A6RP),
SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", ALC861_FIXUP_AMP_VREF_0F),
SND_PCI_QUIRK(0x1462, 0x7254, "HP DX2200", ALC861_FIXUP_NO_JACK_DETECT),
};
/* override the 2.1 chmap */
-static void alc662_fixup_bass_chmap(struct hda_codec *codec,
+static void alc_fixup_bass_chmap(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
if (action == HDA_FIXUP_ACT_BUILD) {
},
[ALC662_FIXUP_BASS_CHMAP] = {
.type = HDA_FIXUP_FUNC,
- .v.func = alc662_fixup_bass_chmap,
+ .v.func = alc_fixup_bass_chmap,
.chained = true,
.chain_id = ALC662_FIXUP_ASUS_MODE4
},
},
[ALC662_FIXUP_BASS_1A_CHMAP] = {
.type = HDA_FIXUP_FUNC,
- .v.func = alc662_fixup_bass_chmap,
+ .v.func = alc_fixup_bass_chmap,
.chained = true,
.chain_id = ALC662_FIXUP_BASS_1A,
},
case 0x10ec0272:
case 0x10ec0663:
case 0x10ec0665:
+ case 0x10ec0668:
set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
break;
case 0x10ec0273:
*/
static const struct hda_codec_preset snd_hda_preset_realtek[] = {
{ .id = 0x10ec0221, .name = "ALC221", .patch = patch_alc269 },
+ { .id = 0x10ec0231, .name = "ALC231", .patch = patch_alc269 },
{ .id = 0x10ec0233, .name = "ALC233", .patch = patch_alc269 },
{ .id = 0x10ec0255, .name = "ALC255", .patch = patch_alc269 },
{ .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 },
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
spec->mic_mute_led_gpio = 0x08; /* GPIO3 */
- codec->bus->avoid_link_reset = 1;
+ /* resetting controller clears GPIO, so we need to keep on */
+ codec->bus->power_keep_link_on = 1;
}
}
dma_params = ssc_p->dma_params[dir];
- ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error);
pr_debug("%s enabled SSC_SR=0x%08x\n",
return 0;
}
+static int atmel_ssc_trigger(struct snd_pcm_substream *substream,
+ int cmd, struct snd_soc_dai *dai)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
+ break;
+ default:
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+ break;
+ }
+
+ return 0;
+}
#ifdef CONFIG_PM
static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai)
.startup = atmel_ssc_startup,
.shutdown = atmel_ssc_shutdown,
.prepare = atmel_ssc_prepare,
+ .trigger = atmel_ssc_trigger,
.hw_params = atmel_ssc_hw_params,
.set_fmt = atmel_ssc_set_dai_fmt,
.set_clkdiv = atmel_ssc_set_dai_clkdiv,
goto out;
}
+ snd_soc_card_set_drvdata(card, priv);
+
card->dev = &pdev->dev;
card->owner = THIS_MODULE;
card->dai_link = dai;
dai->stream_name = "WM8731 PCM";
dai->codec_dai_name = "wm8731-hifi";
dai->init = sam9x5_wm8731_init;
- dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+ dai->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF
| SND_SOC_DAIFMT_CBM_CFM;
ret = snd_soc_of_parse_card_name(card, "atmel,model");
ARIZONA_MIXER_CONTROLS("SPKDAT2L", ARIZONA_OUT6LMIX_INPUT_1_SOURCE),
ARIZONA_MIXER_CONTROLS("SPKDAT2R", ARIZONA_OUT6RMIX_INPUT_1_SOURCE),
-SOC_SINGLE("HPOUT1 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_1L,
- ARIZONA_OUT1_OSR_SHIFT, 1, 0),
-SOC_SINGLE("HPOUT2 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_2L,
- ARIZONA_OUT2_OSR_SHIFT, 1, 0),
-SOC_SINGLE("HPOUT3 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_3L,
- ARIZONA_OUT3_OSR_SHIFT, 1, 0),
-SOC_SINGLE("Speaker High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_4L,
- ARIZONA_OUT4_OSR_SHIFT, 1, 0),
-SOC_SINGLE("SPKDAT1 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_5L,
- ARIZONA_OUT5_OSR_SHIFT, 1, 0),
-SOC_SINGLE("SPKDAT2 High Performance Switch", ARIZONA_OUTPUT_PATH_CONFIG_6L,
- ARIZONA_OUT6_OSR_SHIFT, 1, 0),
-
SOC_DOUBLE_R("HPOUT1 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_1L,
ARIZONA_DAC_DIGITAL_VOLUME_1R, ARIZONA_OUT1L_MUTE_SHIFT, 1, 1),
SOC_DOUBLE_R("HPOUT2 Digital Switch", ARIZONA_DAC_DIGITAL_VOLUME_2L,
ARIZONA_DAC_DIGITAL_VOLUME_6R, ARIZONA_OUT6L_VOL_SHIFT,
0xbf, 0, digital_tlv),
-SOC_DOUBLE_R_RANGE_TLV("HPOUT1 Volume", ARIZONA_OUTPUT_PATH_CONFIG_1L,
- ARIZONA_OUTPUT_PATH_CONFIG_1R,
- ARIZONA_OUT1L_PGA_VOL_SHIFT,
- 0x34, 0x40, 0, ana_tlv),
-SOC_DOUBLE_R_RANGE_TLV("HPOUT2 Volume", ARIZONA_OUTPUT_PATH_CONFIG_2L,
- ARIZONA_OUTPUT_PATH_CONFIG_2R,
- ARIZONA_OUT2L_PGA_VOL_SHIFT,
- 0x34, 0x40, 0, ana_tlv),
-SOC_DOUBLE_R_RANGE_TLV("HPOUT3 Volume", ARIZONA_OUTPUT_PATH_CONFIG_3L,
- ARIZONA_OUTPUT_PATH_CONFIG_3R,
- ARIZONA_OUT3L_PGA_VOL_SHIFT, 0x34, 0x40, 0, ana_tlv),
-
SOC_DOUBLE("SPKDAT1 Switch", ARIZONA_PDM_SPK1_CTRL_1, ARIZONA_SPK1L_MUTE_SHIFT,
ARIZONA_SPK1R_MUTE_SHIFT, 1, 1),
SOC_DOUBLE("SPKDAT2 Switch", ARIZONA_PDM_SPK2_CTRL_1, ARIZONA_SPK2L_MUTE_SHIFT,
iface |= 0x0001;
break;
case SND_SOC_DAIFMT_DSP_A:
- iface |= 0x0003;
+ iface |= 0x0013;
break;
case SND_SOC_DAIFMT_DSP_B:
- iface |= 0x0013;
+ iface |= 0x0003;
break;
default:
return -EINVAL;
/* disable POBCTRL, SOFT_ST and BUFDCOPEN */
snd_soc_write(codec, WM8990_ANTIPOP2, 0x0);
+
+ codec->cache_sync = 1;
break;
}
break;
}
- dapm->bias_level = level;
-
return 0;
}
return -ENOMEM;
card->dev = &op->dev;
- platform_set_drvdata(op, pdata);
pdata->card = card;
if (ret)
dev_err(&op->dev, "snd_soc_register_card() failed: %d\n", ret);
+ platform_set_drvdata(op, pdata);
+
return ret;
}
SNDRV_PCM_FMTBIT_S24_LE | \
SNDRV_PCM_FMTBIT_S32_LE)
+#define KIRKWOOD_SPDIF_FORMATS \
+ (SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S24_LE)
+
static int kirkwood_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
unsigned int fmt)
{
ctl);
}
- if (dai->id == 0)
- ctl &= ~KIRKWOOD_PLAYCTL_SPDIF_EN; /* i2s */
- else
- ctl &= ~KIRKWOOD_PLAYCTL_I2S_EN; /* spdif */
-
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
/* configure */
ctl = priv->ctl_play;
+ if (dai->id == 0)
+ ctl &= ~KIRKWOOD_PLAYCTL_SPDIF_EN; /* i2s */
+ else
+ ctl &= ~KIRKWOOD_PLAYCTL_I2S_EN; /* spdif */
+
value = ctl & ~KIRKWOOD_PLAYCTL_ENABLE_MASK;
writel(value, priv->io + KIRKWOOD_PLAYCTL);
.channels_max = 2,
.rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
SNDRV_PCM_RATE_96000,
- .formats = KIRKWOOD_I2S_FORMATS,
+ .formats = KIRKWOOD_SPDIF_FORMATS,
},
.capture = {
.channels_min = 1,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
SNDRV_PCM_RATE_96000,
- .formats = KIRKWOOD_I2S_FORMATS,
+ .formats = KIRKWOOD_SPDIF_FORMATS,
},
.ops = &kirkwood_i2s_dai_ops,
},
.rates = SNDRV_PCM_RATE_8000_192000 |
SNDRV_PCM_RATE_CONTINUOUS |
SNDRV_PCM_RATE_KNOT,
- .formats = KIRKWOOD_I2S_FORMATS,
+ .formats = KIRKWOOD_SPDIF_FORMATS,
},
.capture = {
.channels_min = 1,
.rates = SNDRV_PCM_RATE_8000_192000 |
SNDRV_PCM_RATE_CONTINUOUS |
SNDRV_PCM_RATE_KNOT,
- .formats = KIRKWOOD_I2S_FORMATS,
+ .formats = KIRKWOOD_SPDIF_FORMATS,
},
.ops = &kirkwood_i2s_dai_ops,
},
SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);
n810_ext_control(&codec->dapm);
- return clk_enable(sys_clkout2);
+ return clk_prepare_enable(sys_clkout2);
}
static void n810_shutdown(struct snd_pcm_substream *substream)
{
- clk_disable(sys_clkout2);
+ clk_disable_unprepare(sys_clkout2);
}
static int n810_hw_params(struct snd_pcm_substream *substream,
config SND_SOC_RCAR
tristate "R-Car series SRU/SCU/SSIU/SSI support"
select SND_SIMPLE_CARD
+ select REGMAP
help
This option enables R-Car SUR/SCU/SSIU/SSI sound support
break;
case 2:
((u16 *)(&ucontrol->value.bytes.data))[0]
- &= ~params->mask;
+ &= cpu_to_be16(~params->mask);
break;
case 4:
((u32 *)(&ucontrol->value.bytes.data))[0]
- &= ~params->mask;
+ &= cpu_to_be32(~params->mask);
break;
default:
return -EINVAL;
*/
int devm_snd_soc_register_card(struct device *dev, struct snd_soc_card *card)
{
- struct device **ptr;
+ struct snd_soc_card **ptr;
int ret;
ptr = devres_alloc(devm_card_release, sizeof(*ptr), GFP_KERNEL);
ret = snd_soc_register_card(card);
if (ret == 0) {
- *ptr = dev;
+ *ptr = card;
devres_add(dev, ptr);
} else {
devres_free(ptr);
}
}
+static void dmaengine_pcm_release_chan(struct dmaengine_pcm *pcm)
+{
+ unsigned int i;
+
+ for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_CAPTURE;
+ i++) {
+ if (!pcm->chan[i])
+ continue;
+ dma_release_channel(pcm->chan[i]);
+ if (pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX)
+ break;
+ }
+}
+
/**
* snd_dmaengine_pcm_register - Register a dmaengine based PCM device
* @dev: The parent device for the PCM device
const struct snd_dmaengine_pcm_config *config, unsigned int flags)
{
struct dmaengine_pcm *pcm;
+ int ret;
pcm = kzalloc(sizeof(*pcm), GFP_KERNEL);
if (!pcm)
dmaengine_pcm_request_chan_of(pcm, dev);
if (flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
- return snd_soc_add_platform(dev, &pcm->platform,
+ ret = snd_soc_add_platform(dev, &pcm->platform,
&dmaengine_no_residue_pcm_platform);
else
- return snd_soc_add_platform(dev, &pcm->platform,
+ ret = snd_soc_add_platform(dev, &pcm->platform,
&dmaengine_pcm_platform);
+ if (ret)
+ goto err_free_dma;
+
+ return 0;
+
+err_free_dma:
+ dmaengine_pcm_release_chan(pcm);
+ kfree(pcm);
+ return ret;
}
EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_register);
{
struct snd_soc_platform *platform;
struct dmaengine_pcm *pcm;
- unsigned int i;
platform = snd_soc_lookup_platform(dev);
if (!platform)
pcm = soc_platform_to_pcm(platform);
- for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_CAPTURE; i++) {
- if (pcm->chan[i]) {
- dma_release_channel(pcm->chan[i]);
- if (pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX)
- break;
- }
- }
-
snd_soc_remove_platform(platform);
+ dmaengine_pcm_release_chan(pcm);
kfree(pcm);
}
EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_unregister);
}
}
-static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw,
+static void soc_pcm_init_runtime_hw(struct snd_pcm_runtime *runtime,
struct snd_soc_pcm_stream *codec_stream,
struct snd_soc_pcm_stream *cpu_stream)
{
- hw->rate_min = max(codec_stream->rate_min, cpu_stream->rate_min);
- hw->rate_max = max(codec_stream->rate_max, cpu_stream->rate_max);
+ struct snd_pcm_hardware *hw = &runtime->hw;
+
hw->channels_min = max(codec_stream->channels_min,
cpu_stream->channels_min);
hw->channels_max = min(codec_stream->channels_max,
if (cpu_stream->rates
& (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
hw->rates |= codec_stream->rates;
+
+ snd_pcm_limit_hw_rates(runtime);
+
+ hw->rate_min = max(hw->rate_min, cpu_stream->rate_min);
+ hw->rate_min = max(hw->rate_min, codec_stream->rate_min);
+ hw->rate_max = min_not_zero(hw->rate_max, cpu_stream->rate_max);
+ hw->rate_max = min_not_zero(hw->rate_max, codec_stream->rate_max);
}
/*
/* Check that the codec and cpu DAIs are compatible */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- soc_pcm_init_runtime_hw(&runtime->hw, &codec_dai_drv->playback,
+ soc_pcm_init_runtime_hw(runtime, &codec_dai_drv->playback,
&cpu_dai_drv->playback);
} else {
- soc_pcm_init_runtime_hw(&runtime->hw, &codec_dai_drv->capture,
+ soc_pcm_init_runtime_hw(runtime, &codec_dai_drv->capture,
&cpu_dai_drv->capture);
}
ret = -EINVAL;
- snd_pcm_limit_hw_rates(runtime);
if (!runtime->hw.rates) {
printk(KERN_ERR "ASoC: %s <-> %s No matching rates\n",
codec_dai->name, cpu_dai->name);
struct snd_soc_platform *platform = rtd->platform;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_codec *codec = rtd->codec;
+ bool playback = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
mutex_lock_nested(&rtd->pcm_mutex, rtd->pcm_subclass);
/* apply codec digital mute */
- if (!codec->active)
+ if ((playback && codec_dai->playback_active == 1) ||
+ (!playback && codec_dai->capture_active == 1))
snd_soc_dai_digital_mute(codec_dai, 1, substream->stream);
/* free any machine hw params */
unsigned int fmt)
{
struct tegra20_i2s *i2s = snd_soc_dai_get_drvdata(dai);
- unsigned int mask, val;
+ unsigned int mask = 0, val = 0;
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
return -EINVAL;
}
- mask = TEGRA20_I2S_CTRL_MASTER_ENABLE;
+ mask |= TEGRA20_I2S_CTRL_MASTER_ENABLE;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
- val = TEGRA20_I2S_CTRL_MASTER_ENABLE;
+ val |= TEGRA20_I2S_CTRL_MASTER_ENABLE;
break;
case SND_SOC_DAIFMT_CBM_CFM:
break;
{
struct device *dev = dai->dev;
struct tegra20_spdif *spdif = snd_soc_dai_get_drvdata(dai);
- unsigned int mask, val;
+ unsigned int mask = 0, val = 0;
int ret, spdifclock;
- mask = TEGRA20_SPDIF_CTRL_PACK |
- TEGRA20_SPDIF_CTRL_BIT_MODE_MASK;
+ mask |= TEGRA20_SPDIF_CTRL_PACK |
+ TEGRA20_SPDIF_CTRL_BIT_MODE_MASK;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
- val = TEGRA20_SPDIF_CTRL_PACK |
- TEGRA20_SPDIF_CTRL_BIT_MODE_16BIT;
+ val |= TEGRA20_SPDIF_CTRL_PACK |
+ TEGRA20_SPDIF_CTRL_BIT_MODE_16BIT;
break;
default:
return -EINVAL;
unsigned int fmt)
{
struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
- unsigned int mask, val;
+ unsigned int mask = 0, val = 0;
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
return -EINVAL;
}
- mask = TEGRA30_I2S_CTRL_MASTER_ENABLE;
+ mask |= TEGRA30_I2S_CTRL_MASTER_ENABLE;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
- val = TEGRA30_I2S_CTRL_MASTER_ENABLE;
+ val |= TEGRA30_I2S_CTRL_MASTER_ENABLE;
break;
case SND_SOC_DAIFMT_CBM_CFM:
break;
if (usb_pipein(ep->pipe) ||
snd_usb_endpoint_implicit_feedback_sink(ep)) {
+ urb_packs = packs_per_ms;
+ /*
+ * Wireless devices can poll at a max rate of once per 4ms.
+ * For dataintervals less than 5, increase the packet count to
+ * allow the host controller to use bursting to fill in the
+ * gaps.
+ */
+ if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_WIRELESS) {
+ int interval = ep->datainterval;
+ while (interval < 5) {
+ urb_packs <<= 1;
+ ++interval;
+ }
+ }
/* make capture URBs <= 1 ms and smaller than a period */
- urb_packs = min(max_packs_per_urb, packs_per_ms);
+ urb_packs = min(max_packs_per_urb, urb_packs);
while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
urb_packs >>= 1;
ep->nurbs = MAX_URBS;
static enum event_type
process_op(struct event_format *event, struct print_arg *arg, char **tok);
+/*
+ * For __print_symbolic() and __print_flags, we need to completely
+ * evaluate the first argument, which defines what to print next.
+ */
+static enum event_type
+process_field_arg(struct event_format *event, struct print_arg *arg, char **tok)
+{
+ enum event_type type;
+
+ type = process_arg(event, arg, tok);
+
+ while (type == EVENT_OP) {
+ type = process_op(event, arg, tok);
+ }
+
+ return type;
+}
+
static enum event_type
process_cond(struct event_format *event, struct print_arg *top, char **tok)
{
goto out_free;
}
- type = process_arg(event, field, &token);
+ type = process_field_arg(event, field, &token);
/* Handle operations in the first argument */
while (type == EVENT_OP)
goto out_free;
}
- type = process_arg(event, field, &token);
+ type = process_field_arg(event, field, &token);
+
if (test_type_token(type, token, EVENT_DELIM, ","))
goto out_free_field;
* is in the bottom half of the 32 bit field.
*/
offset &= 0xffff;
- val = (unsigned long long)(data + offset);
+ val = (unsigned long long)((unsigned long)data + offset);
break;
default: /* not sure what to do there */
return 0;
if (evsel->idx == (int) desc[i].leader_idx) {
evsel->leader = evsel;
/* {anon_group} is a dummy name */
- if (strcmp(desc[i].name, "{anon_group}"))
+ if (strcmp(desc[i].name, "{anon_group}")) {
evsel->group_name = desc[i].name;
+ desc[i].name = NULL;
+ }
evsel->nr_members = desc[i].nr_members;
if (i >= nr_groups || nr > 0) {
ret = 0;
out_free:
- while ((int) --i >= 0)
+ for (i = 0; i < nr_groups; i++)
free(desc[i].name);
free(desc);
/* Override latest entry if it had no specific time coverage */
if (!curr->start) {
comm__override(curr, str, timestamp);
- return 0;
+ } else {
+ new = comm__new(str, timestamp);
+ if (!new)
+ return -ENOMEM;
+ list_add(&new->list, &thread->comm_list);
}
- new = comm__new(str, timestamp);
- if (!new)
- return -ENOMEM;
-
- list_add(&new->list, &thread->comm_list);
thread->comm_set = true;
return 0;
.fi
.SH "SEE ALSO"
.LP
-cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1)
+cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1),
+cpupower\-idle\-set(1)
--- /dev/null
+.TH "CPUPOWER-IDLE-SET" "1" "0.1" "" "cpupower Manual"
+.SH "NAME"
+.LP
+cpupower idle\-set \- Utility to set cpu idle state specific kernel options
+.SH "SYNTAX"
+.LP
+cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP]
+.SH "DESCRIPTION"
+.LP
+The cpupower idle\-set subcommand allows to set cpu idle, also called cpu
+sleep state, specific options offered by the kernel. One example is disabling
+sleep states. This can be handy for power vs performance tuning.
+.SH "OPTIONS"
+.LP
+.TP
+\fB\-d\fR \fB\-\-disable\fR
+Disable a specific processor sleep state.
+.TP
+\fB\-e\fR \fB\-\-enable\fR
+Enable a specific processor sleep state.
+
+.SH "REMARKS"
+.LP
+Cpuidle Governors Policy on Disabling Sleep States
+
+.RS 4
+Depending on the used cpuidle governor, implementing the kernel policy
+how to choose sleep states, subsequent sleep states on this core, might get
+disabled as well.
+
+There are two cpuidle governors ladder and menu. While the ladder
+governor is always available, if CONFIG_CPU_IDLE is selected, the
+menu governor additionally requires CONFIG_NO_HZ.
+
+The behavior and the effect of the disable variable depends on the
+implementation of a particular governor. In the ladder governor, for
+example, it is not coherent, i.e. if one is disabling a light state,
+then all deeper states are disabled as well. Likewise, if one enables a
+deep state but a lighter state still is disabled, then this has no effect.
+.RE
+.LP
+Disabling the Lightest Sleep State may not have any Affect
+
+.RS 4
+If criteria are not met to enter deeper sleep states and the lightest sleep
+state is chosen when idle, the kernel may still enter this sleep state,
+irrespective of whether it is disabled or not. This is also reflected in
+the usage count of the disabled sleep state when using the cpupower idle-info
+command.
+.RE
+.LP
+Selecting specific CPU Cores
+
+.RS 4
+By default processor sleep states of all CPU cores are set. Please refer
+to the cpupower(1) manpage in the \-\-cpu option section how to disable
+C-states of specific cores.
+.RE
+.SH "FILES"
+.nf
+\fI/sys/devices/system/cpu/cpu*/cpuidle/state*\fP
+\fI/sys/devices/system/cpu/cpuidle/*\fP
+.fi
+.SH "AUTHORS"
+.nf
+Thomas Renninger <trenn@suse.de>
+.fi
+.SH "SEE ALSO"
+.LP
+cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1),
+cpupower\-idle\-info(1)
int sysfs_is_idlestate_disabled(unsigned int cpu,
unsigned int idlestate)
{
- if (sysfs_get_idlestate_count(cpu) < idlestate)
+ if (sysfs_get_idlestate_count(cpu) <= idlestate)
return -1;
if (!sysfs_idlestate_file_exists(cpu, idlestate,
char value[SYSFS_PATH_MAX];
int bytes_written;
- if (sysfs_get_idlestate_count(cpu) < idlestate)
+ if (sysfs_get_idlestate_count(cpu) <= idlestate)
return -1;
if (!sysfs_idlestate_file_exists(cpu, idlestate,
projects / linux-drm-fsl-dcu.git / commitdiff