#include "db8500-regs.h"
#include "id.h"
-static void __iomem *scu_base;
-static void __iomem *backupram;
-
-/* This is called from headsmp.S to wakeup the secondary core */
-extern void u8500_secondary_startup(void);
-
-/*
- * Write pen_release in a way that is guaranteed to be visible to all
- * observers, irrespective of whether they're taking part in coherency
- * or not. This is necessary for the hotplug code to work reliably.
- */
-static void write_pen_release(int val)
-{
- pen_release = val;
- smp_wmb();
- sync_cache_w(&pen_release);
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-static void ux500_secondary_init(unsigned int cpu)
-{
- /*
- * let the primary processor know we're out of the
- * pen, then head off into the C entry point
- */
- write_pen_release(-1);
-
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
-}
+/* Magic triggers in backup RAM */
+#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
+#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
-static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static void wakeup_secondary(void)
{
- unsigned long timeout;
-
- /*
- * set synchronisation state between this boot processor
- * and the secondary one
- */
- spin_lock(&boot_lock);
-
- /*
- * The secondary processor is waiting to be released from
- * the holding pen - release it, then wait for it to flag
- * that it has been released by resetting pen_release.
- */
- write_pen_release(cpu_logical_map(cpu));
-
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+ struct device_node *np;
+ static void __iomem *backupram;
- timeout = jiffies + (1 * HZ);
- while (time_before(jiffies, timeout)) {
- if (pen_release == -1)
- break;
+ np = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram");
+ if (!np) {
+ pr_err("No backupram base address\n");
+ return;
+ }
+ backupram = of_iomap(np, 0);
+ of_node_put(np);
+ if (!backupram) {
+ pr_err("No backupram remap\n");
+ return;
}
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return pen_release != -1 ? -ENOSYS : 0;
-}
-
-static void __init wakeup_secondary(void)
-{
/*
* write the address of secondary startup into the backup ram register
* at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
* backup ram register at offset 0x1FF0, which is what boot rom code
- * is waiting for. This would wake up the secondary core from WFE
+ * is waiting for. This will wake up the secondary core from WFE.
*/
-#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
- __raw_writel(virt_to_phys(u8500_secondary_startup),
- backupram + UX500_CPU1_JUMPADDR_OFFSET);
-
-#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
- __raw_writel(0xA1FEED01,
- backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
+ writel(virt_to_phys(secondary_startup),
+ backupram + UX500_CPU1_JUMPADDR_OFFSET);
+ writel(0xA1FEED01,
+ backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
/* make sure write buffer is drained */
mb();
+ iounmap(backupram);
}
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init ux500_smp_init_cpus(void)
+static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
{
- unsigned int i, ncores;
struct device_node *np;
+ static void __iomem *scu_base;
+ unsigned int ncores;
+ int i;
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (!np) {
+ pr_err("No SCU base address\n");
+ return;
+ }
scu_base = of_iomap(np, 0);
of_node_put(np);
- if (!scu_base)
+ if (!scu_base) {
+ pr_err("No SCU remap\n");
return;
- backupram = ioremap(U8500_BACKUPRAM0_BASE, SZ_8K);
- ncores = scu_get_core_count(scu_base);
-
- /* sanity check */
- if (ncores > nr_cpu_ids) {
- pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
- ncores, nr_cpu_ids);
- ncores = nr_cpu_ids;
}
+ scu_enable(scu_base);
+ ncores = scu_get_core_count(scu_base);
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
+ iounmap(scu_base);
}
-static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
+static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- scu_enable(scu_base);
wakeup_secondary();
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+ return 0;
}
struct smp_operations ux500_smp_ops __initdata = {
- .smp_init_cpus = ux500_smp_init_cpus,
.smp_prepare_cpus = ux500_smp_prepare_cpus,
- .smp_secondary_init = ux500_secondary_init,
.smp_boot_secondary = ux500_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = ux500_cpu_die,
#endif
};
+CPU_METHOD_OF_DECLARE(ux500_smp, "ste,dbx500-smp", &ux500_smp_ops);
projects / linux-drm-fsl-dcu.git / commitdiff