tty: amba-pl011: convert accessor functions to take uart_amba_port

Convert the new accessor functions to take the uart_amba_port instead
of the port base address.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index bd01e75128dc6e4d29725124d7e608315c10ee77..0e7f045b8f4f887e7ba7f30bdf887e6ace6611bf 100644 (file)
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -184,14 +184,16 @@ struct uart_amba_port {
 #endif
 };
 
-static unsigned int pl011_read(void __iomem *base, unsigned int reg)
+static unsigned int pl011_read(const struct uart_amba_port *uap,
+       unsigned int reg)
 {
-       return readw(base + reg);
+       return readw(uap->port.membase + reg);
 }
 
-static void pl011_write(unsigned int val, void __iomem *base, unsigned int reg)
+static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
+       unsigned int reg)
 {
-       writew(val, base + reg);
+       writew(val, uap->port.membase + reg);
 }
 
 /*
@@ -206,13 +208,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
        int fifotaken = 0;
 
        while (max_count--) {
-               status = pl011_read(uap->port.membase, UART01x_FR);
+               status = pl011_read(uap, UART01x_FR);
                if (status & UART01x_FR_RXFE)
                        break;
 
                /* Take chars from the FIFO and update status */
-               ch = pl011_read(uap->port.membase, UART01x_DR) |
-                       UART_DUMMY_DR_RX;
+               ch = pl011_read(uap, UART01x_DR) | UART_DUMMY_DR_RX;
                flag = TTY_NORMAL;
                uap->port.icount.rx++;
                fifotaken++;
@@ -448,7 +449,7 @@ static void pl011_dma_tx_callback(void *data)
 
        dmacr = uap->dmacr;
        uap->dmacr = dmacr & ~UART011_TXDMAE;
-       pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+       pl011_write(uap->dmacr, uap, UART011_DMACR);
 
        /*
         * If TX DMA was disabled, it means that we've stopped the DMA for
@@ -562,7 +563,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
        dma_dev->device_issue_pending(chan);
 
        uap->dmacr |= UART011_TXDMAE;
-       pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+       pl011_write(uap->dmacr, uap, UART011_DMACR);
        uap->dmatx.queued = true;
 
        /*
@@ -598,9 +599,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
         */
        if (uap->dmatx.queued) {
                uap->dmacr |= UART011_TXDMAE;
-               pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+               pl011_write(uap->dmacr, uap, UART011_DMACR);
                uap->im &= ~UART011_TXIM;
-               pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+               pl011_write(uap->im, uap, UART011_IMSC);
                return true;
        }
 
@@ -610,7 +611,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
         */
        if (pl011_dma_tx_refill(uap) > 0) {
                uap->im &= ~UART011_TXIM;
-               pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+               pl011_write(uap->im, uap, UART011_IMSC);
                return true;
        }
        return false;
@@ -624,7 +625,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
 {
        if (uap->dmatx.queued) {
                uap->dmacr &= ~UART011_TXDMAE;
-               pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+               pl011_write(uap->dmacr, uap, UART011_DMACR);
        }
 }
 
@@ -650,14 +651,12 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
                if (!uap->dmatx.queued) {
                        if (pl011_dma_tx_refill(uap) > 0) {
                                uap->im &= ~UART011_TXIM;
-                               pl011_write(uap->im, uap->port.membase,
-                                           UART011_IMSC);
+                               pl011_write(uap->im, uap, UART011_IMSC);
                        } else
                                ret = false;
                } else if (!(uap->dmacr & UART011_TXDMAE)) {
                        uap->dmacr |= UART011_TXDMAE;
-                       pl011_write(uap->dmacr, uap->port.membase,
-                                   UART011_DMACR);
+                       pl011_write(uap->dmacr, uap, UART011_DMACR);
                }
                return ret;
        }
@@ -668,9 +667,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
         */
        dmacr = uap->dmacr;
        uap->dmacr &= ~UART011_TXDMAE;
-       pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+       pl011_write(uap->dmacr, uap, UART011_DMACR);
 
-       if (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF) {
+       if (pl011_read(uap, UART01x_FR) & UART01x_FR_TXFF) {
                /*
                 * No space in the FIFO, so enable the transmit interrupt
                 * so we know when there is space.  Note that once we've
@@ -679,13 +678,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
                return false;
        }
 
-       pl011_write(uap->port.x_char, uap->port.membase, UART01x_DR);
+       pl011_write(uap->port.x_char, uap, UART01x_DR);
        uap->port.icount.tx++;
        uap->port.x_char = 0;
 
        /* Success - restore the DMA state */
        uap->dmacr = dmacr;
-       pl011_write(dmacr, uap->port.membase, UART011_DMACR);
+       pl011_write(dmacr, uap, UART011_DMACR);
 
        return true;
 }
@@ -713,7 +712,7 @@ __acquires(&uap->port.lock)
                             DMA_TO_DEVICE);
                uap->dmatx.queued = false;
                uap->dmacr &= ~UART011_TXDMAE;
-               pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+               pl011_write(uap->dmacr, uap, UART011_DMACR);
        }
 }
 
@@ -753,11 +752,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
        dma_async_issue_pending(rxchan);
 
        uap->dmacr |= UART011_RXDMAE;
-       pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+       pl011_write(uap->dmacr, uap, UART011_DMACR);
        uap->dmarx.running = true;
 
        uap->im &= ~UART011_RXIM;
-       pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+       pl011_write(uap->im, uap, UART011_IMSC);
 
        return 0;
 }
@@ -816,7 +815,7 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
        if (dma_count == pending && readfifo) {
                /* Clear any error flags */
                pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
-                           UART011_FEIS, uap->port.membase, UART011_ICR);
+                           UART011_FEIS, uap, UART011_ICR);
 
                /*
                 * If we read all the DMA'd characters, and we had an
@@ -864,7 +863,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
 
        /* Disable RX DMA - incoming data will wait in the FIFO */
        uap->dmacr &= ~UART011_RXDMAE;
-       pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+       pl011_write(uap->dmacr, uap, UART011_DMACR);
        uap->dmarx.running = false;
 
        pending = sgbuf->sg.length - state.residue;
@@ -884,7 +883,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
                dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
                        "fall back to interrupt mode\n");
                uap->im |= UART011_RXIM;
-               pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+               pl011_write(uap->im, uap, UART011_IMSC);
        }
 }
 
@@ -932,7 +931,7 @@ static void pl011_dma_rx_callback(void *data)
                dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
                        "fall back to interrupt mode\n");
                uap->im |= UART011_RXIM;
-               pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+               pl011_write(uap->im, uap, UART011_IMSC);
        }
 }
 
@@ -945,7 +944,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
 {
        /* FIXME.  Just disable the DMA enable */
        uap->dmacr &= ~UART011_RXDMAE;
-       pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+       pl011_write(uap->dmacr, uap, UART011_DMACR);
 }
 
 /*
@@ -989,7 +988,7 @@ static void pl011_dma_rx_poll(unsigned long args)
                spin_lock_irqsave(&uap->port.lock, flags);
                pl011_dma_rx_stop(uap);
                uap->im |= UART011_RXIM;
-               pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+               pl011_write(uap->im, uap, UART011_IMSC);
                spin_unlock_irqrestore(&uap->port.lock, flags);
 
                uap->dmarx.running = false;
@@ -1051,7 +1050,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
 skip_rx:
        /* Turn on DMA error (RX/TX will be enabled on demand) */
        uap->dmacr |= UART011_DMAONERR;
-       pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+       pl011_write(uap->dmacr, uap, UART011_DMACR);
 
        /*
         * ST Micro variants has some specific dma burst threshold
@@ -1060,7 +1059,7 @@ skip_rx:
         */
        if (uap->vendor->dma_threshold)
                pl011_write(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
-                           uap->port.membase, ST_UART011_DMAWM);
+                           uap, ST_UART011_DMAWM);
 
        if (uap->using_rx_dma) {
                if (pl011_dma_rx_trigger_dma(uap))
@@ -1085,12 +1084,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
                return;
 
        /* Disable RX and TX DMA */
-       while (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_BUSY)
+       while (pl011_read(uap, UART01x_FR) & UART01x_FR_BUSY)
                barrier();
 
        spin_lock_irq(&uap->port.lock);
        uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
-       pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+       pl011_write(uap->dmacr, uap, UART011_DMACR);
        spin_unlock_irq(&uap->port.lock);
 
        if (uap->using_tx_dma) {
@@ -1191,7 +1190,7 @@ static void pl011_stop_tx(struct uart_port *port)
            container_of(port, struct uart_amba_port, port);
 
        uap->im &= ~UART011_TXIM;
-       pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+       pl011_write(uap->im, uap, UART011_IMSC);
        pl011_dma_tx_stop(uap);
 }
 
@@ -1201,7 +1200,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
 static void pl011_start_tx_pio(struct uart_amba_port *uap)
 {
        uap->im |= UART011_TXIM;
-       pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+       pl011_write(uap->im, uap, UART011_IMSC);
        pl011_tx_chars(uap, false);
 }
 
@@ -1221,7 +1220,7 @@ static void pl011_stop_rx(struct uart_port *port)
 
        uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
                     UART011_PEIM|UART011_BEIM|UART011_OEIM);
-       pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+       pl011_write(uap->im, uap, UART011_IMSC);
 
        pl011_dma_rx_stop(uap);
 }
@@ -1232,7 +1231,7 @@ static void pl011_enable_ms(struct uart_port *port)
            container_of(port, struct uart_amba_port, port);
 
        uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
-       pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+       pl011_write(uap->im, uap, UART011_IMSC);
 }
 
 static void pl011_rx_chars(struct uart_amba_port *uap)
@@ -1252,7 +1251,7 @@ __acquires(&uap->port.lock)
                        dev_dbg(uap->port.dev, "could not trigger RX DMA job "
                                "fall back to interrupt mode again\n");
                        uap->im |= UART011_RXIM;
-                       pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+                       pl011_write(uap->im, uap, UART011_IMSC);
                } else {
 #ifdef CONFIG_DMA_ENGINE
                        /* Start Rx DMA poll */
@@ -1273,10 +1272,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
                          bool from_irq)
 {
        if (unlikely(!from_irq) &&
-           pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF)
+           pl011_read(uap, UART01x_FR) & UART01x_FR_TXFF)
                return false; /* unable to transmit character */
 
-       pl011_write(c, uap->port.membase, UART01x_DR);
+       pl011_write(c, uap, UART01x_DR);
        uap->port.icount.tx++;
 
        return true;
@@ -1323,8 +1322,7 @@ static void pl011_modem_status(struct uart_amba_port *uap)
 {
        unsigned int status, delta;
 
-       status = pl011_read(uap->port.membase, UART01x_FR);
-       status &= UART01x_FR_MODEM_ANY;
+       status = pl011_read(uap, UART01x_FR) & UART01x_FR_MODEM_ANY;
 
        delta = status ^ uap->old_status;
        uap->old_status = status;
@@ -1352,15 +1350,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
                return;
 
        /* workaround to make sure that all bits are unlocked.. */
-       pl011_write(0x00, uap->port.membase, UART011_ICR);
+       pl011_write(0x00, uap, UART011_ICR);
 
        /*
         * WA: introduce 26ns(1 uart clk) delay before W1C;
         * single apb access will incur 2 pclk(133.12Mhz) delay,
         * so add 2 dummy reads
         */
-       dummy_read = pl011_read(uap->port.membase, UART011_ICR);
-       dummy_read = pl011_read(uap->port.membase, UART011_ICR);
+       dummy_read = pl011_read(uap, UART011_ICR);
+       dummy_read = pl011_read(uap, UART011_ICR);
 }
 
 static irqreturn_t pl011_int(int irq, void *dev_id)
@@ -1372,15 +1370,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
        int handled = 0;
 
        spin_lock_irqsave(&uap->port.lock, flags);
-       imsc = pl011_read(uap->port.membase, UART011_IMSC);
-       status = pl011_read(uap->port.membase, UART011_RIS) & imsc;
+       imsc = pl011_read(uap, UART011_IMSC);
+       status = pl011_read(uap, UART011_RIS) & imsc;
        if (status) {
                do {
                        check_apply_cts_event_workaround(uap);
 
                        pl011_write(status & ~(UART011_TXIS|UART011_RTIS|
                                               UART011_RXIS),
-                                   uap->port.membase, UART011_ICR);
+                                   uap, UART011_ICR);
 
                        if (status & (UART011_RTIS|UART011_RXIS)) {
                                if (pl011_dma_rx_running(uap))
@@ -1397,7 +1395,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
                        if (pass_counter-- == 0)
                                break;
 
-                       status = pl011_read(uap->port.membase, UART011_RIS) & imsc;
+                       status = pl011_read(uap, UART011_RIS) & imsc;
                } while (status != 0);
                handled = 1;
        }
@@ -1411,7 +1409,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
 {
        struct uart_amba_port *uap =
            container_of(port, struct uart_amba_port, port);
-       unsigned int status = pl011_read(uap->port.membase, UART01x_FR);
+       unsigned int status = pl011_read(uap, UART01x_FR);
        return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
 }
 
@@ -1420,7 +1418,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
        struct uart_amba_port *uap =
            container_of(port, struct uart_amba_port, port);
        unsigned int result = 0;
-       unsigned int status = pl011_read(uap->port.membase, UART01x_FR);
+       unsigned int status = pl011_read(uap, UART01x_FR);
 
 #define TIOCMBIT(uartbit, tiocmbit)    \
        if (status & uartbit)           \
@@ -1440,7 +1438,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
            container_of(port, struct uart_amba_port, port);
        unsigned int cr;
 
-       cr = pl011_read(uap->port.membase, UART011_CR);
+       cr = pl011_read(uap, UART011_CR);
 
 #define        TIOCMBIT(tiocmbit, uartbit)             \
        if (mctrl & tiocmbit)           \
@@ -1460,7 +1458,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
        }
 #undef TIOCMBIT
 
-       pl011_write(cr, uap->port.membase, UART011_CR);
+       pl011_write(cr, uap, UART011_CR);
 }
 
 static void pl011_break_ctl(struct uart_port *port, int break_state)
@@ -1471,12 +1469,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
        unsigned int lcr_h;
 
        spin_lock_irqsave(&uap->port.lock, flags);
-       lcr_h = pl011_read(uap->port.membase, uap->lcrh_tx);
+       lcr_h = pl011_read(uap, uap->lcrh_tx);
        if (break_state == -1)
                lcr_h |= UART01x_LCRH_BRK;
        else
                lcr_h &= ~UART01x_LCRH_BRK;
-       pl011_write(lcr_h, uap->port.membase, uap->lcrh_tx);
+       pl011_write(lcr_h, uap, uap->lcrh_tx);
        spin_unlock_irqrestore(&uap->port.lock, flags);
 }
 
@@ -1486,9 +1484,8 @@ static void pl011_quiesce_irqs(struct uart_port *port)
 {
        struct uart_amba_port *uap =
            container_of(port, struct uart_amba_port, port);
-       unsigned char __iomem *regs = uap->port.membase;
 
-       pl011_write(pl011_read(regs, UART011_MIS), regs, UART011_ICR);
+       pl011_write(pl011_read(uap, UART011_MIS), uap, UART011_ICR);
        /*
         * There is no way to clear TXIM as this is "ready to transmit IRQ", so
         * we simply mask it. start_tx() will unmask it.
@@ -1502,8 +1499,8 @@ static void pl011_quiesce_irqs(struct uart_port *port)
         * (including tx queue), so we're also fine with start_tx()'s caller
         * side.
         */
-       pl011_write(pl011_read(regs, UART011_IMSC) & ~UART011_TXIM,
-                   regs, UART011_IMSC);
+       pl011_write(pl011_read(uap, UART011_IMSC) & ~UART011_TXIM, uap,
+                   UART011_IMSC);
 }
 
 static int pl011_get_poll_char(struct uart_port *port)
@@ -1518,11 +1515,11 @@ static int pl011_get_poll_char(struct uart_port *port)
         */
        pl011_quiesce_irqs(port);
 
-       status = pl011_read(uap->port.membase, UART01x_FR);
+       status = pl011_read(uap, UART01x_FR);
        if (status & UART01x_FR_RXFE)
                return NO_POLL_CHAR;
 
-       return pl011_read(uap->port.membase, UART01x_DR);
+       return pl011_read(uap, UART01x_DR);
 }
 
 static void pl011_put_poll_char(struct uart_port *port,
@@ -1531,10 +1528,10 @@ static void pl011_put_poll_char(struct uart_port *port,
        struct uart_amba_port *uap =
            container_of(port, struct uart_amba_port, port);
 
-       while (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF)
+       while (pl011_read(uap, UART01x_FR) & UART01x_FR_TXFF)
                barrier();
 
-       pl011_write(ch, uap->port.membase, UART01x_DR);
+       pl011_write(ch, uap, UART01x_DR);
 }
 
 #endif /* CONFIG_CONSOLE_POLL */
@@ -1560,15 +1557,14 @@ static int pl011_hwinit(struct uart_port *port)
        /* Clear pending error and receive interrupts */
        pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
                    UART011_FEIS | UART011_RTIS | UART011_RXIS,
-                   uap->port.membase, UART011_ICR);
+                   uap, UART011_ICR);
 
        /*
         * Save interrupts enable mask, and enable RX interrupts in case if
         * the interrupt is used for NMI entry.
         */
-       uap->im = pl011_read(uap->port.membase, UART011_IMSC);
-       pl011_write(UART011_RTIM | UART011_RXIM, uap->port.membase,
-                   UART011_IMSC);
+       uap->im = pl011_read(uap, UART011_IMSC);
+       pl011_write(UART011_RTIM | UART011_RXIM, uap, UART011_IMSC);
 
        if (dev_get_platdata(uap->port.dev)) {
                struct amba_pl011_data *plat;
@@ -1582,7 +1578,7 @@ static int pl011_hwinit(struct uart_port *port)
 
 static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
 {
-       pl011_write(lcr_h, uap->port.membase, uap->lcrh_rx);
+       pl011_write(lcr_h, uap, uap->lcrh_rx);
        if (uap->lcrh_rx != uap->lcrh_tx) {
                int i;
                /*
@@ -1590,14 +1586,14 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
                 * to get this delay write read only register 10 times
                 */
                for (i = 0; i < 10; ++i)
-                       pl011_write(0xff, uap->port.membase, UART011_MIS);
-               pl011_write(lcr_h, uap->port.membase, uap->lcrh_tx);
+                       pl011_write(0xff, uap, UART011_MIS);
+               pl011_write(lcr_h, uap, uap->lcrh_tx);
        }
 }
 
 static int pl011_allocate_irq(struct uart_amba_port *uap)
 {
-       pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+       pl011_write(uap->im, uap, UART011_IMSC);
 
        return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
 }
@@ -1612,12 +1608,11 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
        spin_lock_irq(&uap->port.lock);
 
        /* Clear out any spuriously appearing RX interrupts */
-       pl011_write(UART011_RTIS | UART011_RXIS, uap->port.membase,
-                   UART011_ICR);
+       pl011_write(UART011_RTIS | UART011_RXIS, uap, UART011_ICR);
        uap->im = UART011_RTIM;
        if (!pl011_dma_rx_running(uap))
                uap->im |= UART011_RXIM;
-       pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+       pl011_write(uap->im, uap, UART011_IMSC);
        spin_unlock_irq(&uap->port.lock);
 }
 
@@ -1636,21 +1631,21 @@ static int pl011_startup(struct uart_port *port)
        if (retval)
                goto clk_dis;
 
-       pl011_write(uap->vendor->ifls, uap->port.membase, UART011_IFLS);
+       pl011_write(uap->vendor->ifls, uap, UART011_IFLS);
 
        spin_lock_irq(&uap->port.lock);
 
        /* restore RTS and DTR */
        cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
        cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
-       pl011_write(cr, uap->port.membase, UART011_CR);
+       pl011_write(cr, uap, UART011_CR);
 
        spin_unlock_irq(&uap->port.lock);
 
        /*
         * initialise the old status of the modem signals
         */
-       uap->old_status = pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_MODEM_ANY;
+       uap->old_status = pl011_read(uap, UART01x_FR) & UART01x_FR_MODEM_ANY;
 
        /* Startup DMA */
        pl011_dma_startup(uap);
@@ -1691,9 +1686,9 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
 {
       unsigned long val;
 
-      val = pl011_read(uap->port.membase, lcrh);
+      val = pl011_read(uap, lcrh);
       val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
-      pl011_write(val, uap->port.membase, lcrh);
+      pl011_write(val, uap, lcrh);
 }
 
 /*
@@ -1707,11 +1702,11 @@ static void pl011_disable_uart(struct uart_amba_port *uap)
 
        uap->autorts = false;
        spin_lock_irq(&uap->port.lock);
-       cr = pl011_read(uap->port.membase, UART011_CR);
+       cr = pl011_read(uap, UART011_CR);
        uap->old_cr = cr;
        cr &= UART011_CR_RTS | UART011_CR_DTR;
        cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
-       pl011_write(cr, uap->port.membase, UART011_CR);
+       pl011_write(cr, uap, UART011_CR);
        spin_unlock_irq(&uap->port.lock);
 
        /*
@@ -1728,8 +1723,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap)
 
        /* mask all interrupts and clear all pending ones */
        uap->im = 0;
-       pl011_write(uap->im, uap->port.membase, UART011_IMSC);
-       pl011_write(0xffff, uap->port.membase, UART011_ICR);
+       pl011_write(uap->im, uap, UART011_IMSC);
+       pl011_write(0xffff, uap, UART011_ICR);
 
        spin_unlock_irq(&uap->port.lock);
 }
@@ -1881,8 +1876,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
                pl011_enable_ms(port);
 
        /* first, disable everything */
-       old_cr = pl011_read(port->membase, UART011_CR);
-       pl011_write(0, port->membase, UART011_CR);
+       old_cr = pl011_read(uap, UART011_CR);
+       pl011_write(0, uap, UART011_CR);
 
        if (termios->c_cflag & CRTSCTS) {
                if (old_cr & UART011_CR_RTS)
@@ -1915,8 +1910,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
                        quot -= 2;
        }
        /* Set baud rate */
-       pl011_write(quot & 0x3f, port->membase, UART011_FBRD);
-       pl011_write(quot >> 6, port->membase, UART011_IBRD);
+       pl011_write(quot & 0x3f, uap, UART011_FBRD);
+       pl011_write(quot >> 6, uap, UART011_IBRD);
 
        /*
         * ----------v----------v----------v----------v-----
@@ -1925,7 +1920,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
         * ----------^----------^----------^----------^-----
         */
        pl011_write_lcr_h(uap, lcr_h);
-       pl011_write(old_cr, port->membase, UART011_CR);
+       pl011_write(old_cr, uap, UART011_CR);
 
        spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -2066,9 +2061,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch)
        struct uart_amba_port *uap =
            container_of(port, struct uart_amba_port, port);
 
-       while (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF)
+       while (pl011_read(uap, UART01x_FR) & UART01x_FR_TXFF)
                barrier();
-       pl011_write(ch, uap->port.membase, UART01x_DR);
+       pl011_write(ch, uap, UART01x_DR);
 }
 
 static void
@@ -2093,10 +2088,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
         *      First save the CR then disable the interrupts
         */
        if (!uap->vendor->always_enabled) {
-               old_cr = pl011_read(uap->port.membase, UART011_CR);
+               old_cr = pl011_read(uap, UART011_CR);
                new_cr = old_cr & ~UART011_CR_CTSEN;
                new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
-               pl011_write(new_cr, uap->port.membase, UART011_CR);
+               pl011_write(new_cr, uap, UART011_CR);
        }
 
        uart_console_write(&uap->port, s, count, pl011_console_putchar);
@@ -2106,10 +2101,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
         *      and restore the TCR
         */
        do {
-               status = pl011_read(uap->port.membase, UART01x_FR);
+               status = pl011_read(uap, UART01x_FR);
        } while (status & UART01x_FR_BUSY);
        if (!uap->vendor->always_enabled)
-               pl011_write(old_cr, uap->port.membase, UART011_CR);
+               pl011_write(old_cr, uap, UART011_CR);
 
        if (locked)
                spin_unlock(&uap->port.lock);
@@ -2122,10 +2117,10 @@ static void __init
 pl011_console_get_options(struct uart_amba_port *uap, int *baud,
                             int *parity, int *bits)
 {
-       if (pl011_read(uap->port.membase, UART011_CR) & UART01x_CR_UARTEN) {
+       if (pl011_read(uap, UART011_CR) & UART01x_CR_UARTEN) {
                unsigned int lcr_h, ibrd, fbrd;
 
-               lcr_h = pl011_read(uap->port.membase, uap->lcrh_tx);
+               lcr_h = pl011_read(uap, uap->lcrh_tx);
 
                *parity = 'n';
                if (lcr_h & UART01x_LCRH_PEN) {
@@ -2140,13 +2135,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
                else
                        *bits = 8;
 
-               ibrd = pl011_read(uap->port.membase, UART011_IBRD);
-               fbrd = pl011_read(uap->port.membase, UART011_FBRD);
+               ibrd = pl011_read(uap, UART011_IBRD);
+               fbrd = pl011_read(uap, UART011_FBRD);
 
                *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
 
                if (uap->vendor->oversampling) {
-                       if (pl011_read(uap->port.membase, UART011_CR)
+                       if (pl011_read(uap, UART011_CR)
                                  & ST_UART011_CR_OVSFACT)
                                *baud *= 2;
                }
@@ -2348,8 +2343,8 @@ static int pl011_register_port(struct uart_amba_port *uap)
        int ret;
 
        /* Ensure interrupts from this UART are masked and cleared */
-       pl011_write(0, uap->port.membase, UART011_IMSC);
-       pl011_write(0xffff, uap->port.membase, UART011_ICR);
+       pl011_write(0, uap, UART011_IMSC);
+       pl011_write(0xffff, uap, UART011_ICR);
 
        if (!amba_reg.state) {
                ret = uart_register_driver(&amba_reg);