ARM: keystone: dts: fix dt bindings for PCIe

Currently PCIe DT bindings are broken. PCIe driver can't function
without having a SerDes driver that provide the phy configuration.
On K2E EVM, this causes problem since the EVM has Marvell SATA
controller present and with default values in the SerDes register,
it seems to pass the PCIe link check, but causes issues since
the configuration is not correct. The manifestation is that when
EVM is booted with NFS rootfs, the boot hangs. We shouldn't enable
PCIe on this EVM since to work, SerDes driver has to be present as
well. So by default, the PCIe DT binding should be disabled in SoC
specific DTS. It can be enabled in the board specific DTS when the
SerDes device driver is also present.

So fix the status of PCIe DT bindings in the SoC specific DTS to
"disabled". To enable PCIe, the status should be set to "ok" in
the EVM DTS file when SerDes driver support becomes available in
the upstream tree.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
index 5fc14683d6df18ccb265538568343177b08fae0f..efb8703ef8fe0ca5d35a556d68014af4397b6bf5 100644 (file)
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -96,6 +96,7 @@
                        ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
                                0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
 
+                       status = "disabled";
                        device_type = "pci";
                        num-lanes = <2>;
 

diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index c06542b2c954452dcf891f579014478e573b8221..0d6be7498f1e2587d6736cd4cb4601913bcbfa4b 100644 (file)
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -296,6 +296,7 @@
                        ranges = <0x81000000 0 0 0x23250000 0 0x4000
                                0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
 
+                       status = "disabled";
                        device_type = "pci";
                        num-lanes = <2>;