[PATCH] pata_it8213: Add new driver for the IT8213 card
authorAlan <alan@lxorguk.ukuu.org.uk>
Thu, 7 Dec 2006 16:59:14 +0000 (08:59 -0800)
committerJeff Garzik <jeff@garzik.org>
Fri, 9 Feb 2007 22:39:28 +0000 (17:39 -0500)
Add a driver for the IT8213 which is a single channel ICH-ish PATA
controller.  As it is very different to the IT8211/2 it gets its own
driver.  There is a legacy drivers/ide driver also available and I'll post
that once I get time to test it all out (probably early January).  If
anyone else needs the drivers/ide driver and wants to do the merge for
drivers/ide (Bart ??) then I'll forward it.

[akpm@osdl.org: add PCI ID, constify needed_pio[]]
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/ata/Kconfig
drivers/ata/Makefile
drivers/ata/pata_it8213.c [new file with mode: 0644]
include/linux/pci_ids.h

index 1c94b43d2c9b0fd6696ce44fb7837953cd051500..afbd61575da653a84cf402ebdd77711f3db69b48 100644 (file)
@@ -296,7 +296,7 @@ config PATA_ISAPNP
          If unsure, say N.
 
 config PATA_IT821X
-       tristate "IT821x PATA support (Experimental)"
+       tristate "IT8211/2 PATA support (Experimental)"
        depends on PCI && EXPERIMENTAL
        help
          This option enables support for the ITE 8211 and 8212
@@ -305,6 +305,15 @@ config PATA_IT821X
 
          If unsure, say N.
 
+config PATA_IT8213
+       tristate "IT8213 PATA support (Experimental)"
+       depends on PCI && EXPERIMENTAL
+       help
+         This option enables support for the ITE 821 PATA
+          controllers via the new ATA layer.
+
+         If unsure, say N.
+
 config PATA_JMICRON
        tristate "JMicron PATA support"
        depends on PCI
index bc3d81ae757e64e9b98869a3ef1204e420553400..50497ecc9b340182e0d36dc7fc98fb80cd422479 100644 (file)
@@ -33,6 +33,7 @@ obj-$(CONFIG_PATA_HPT3X2N)    += pata_hpt3x2n.o
 obj-$(CONFIG_PATA_HPT3X3)      += pata_hpt3x3.o
 obj-$(CONFIG_PATA_ISAPNP)      += pata_isapnp.o
 obj-$(CONFIG_PATA_IT821X)      += pata_it821x.o
+obj-$(CONFIG_PATA_IT8213)      += pata_it8213.o
 obj-$(CONFIG_PATA_JMICRON)     += pata_jmicron.o
 obj-$(CONFIG_PATA_NETCELL)     += pata_netcell.o
 obj-$(CONFIG_PATA_NS87410)     += pata_ns87410.o
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
new file mode 100644 (file)
index 0000000..7e9a416
--- /dev/null
@@ -0,0 +1,354 @@
+/*
+ *    pata_it8213.c - iTE Tech. Inc.  IT8213 PATA driver
+ *
+ *    The IT8213 is a very Intel ICH like device for timing purposes, having
+ *    a similar register layout and the same split clock arrangement. Cable
+ *    detection is different, and it does not have slave channels or all the
+ *    clutter of later ICH/SATA setups.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/ata.h>
+
+#define DRV_NAME       "pata_it8213"
+#define DRV_VERSION    "0.0.2"
+
+/**
+ *     it8213_pre_reset        -       check for 40/80 pin
+ *     @ap: Port
+ *
+ *     Perform cable detection for the 8213 ATA interface. This is
+ *     different to the PIIX arrangement
+ */
+
+static int it8213_pre_reset(struct ata_port *ap)
+{
+       static const struct pci_bits it8213_enable_bits[] = {
+               { 0x41U, 1U, 0x80UL, 0x80UL },  /* port 0 */
+       };
+
+       struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+       u8 tmp;
+
+       if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))
+               return -ENOENT;
+
+       pci_read_config_byte(pdev, 0x42, &tmp);
+       if (tmp & 2)    /* The initial docs are incorrect */
+               ap->cbl = ATA_CBL_PATA40;
+       else
+               ap->cbl = ATA_CBL_PATA80;
+       return ata_std_prereset(ap);
+}
+
+/**
+ *     it8213_probe_reset - Probe specified port on PATA host controller
+ *     @ap: Port to probe
+ *
+ *     LOCKING:
+ *     None (inherited from caller).
+ */
+
+static void it8213_error_handler(struct ata_port *ap)
+{
+       ata_bmdma_drive_eh(ap, it8213_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ *     it8213_set_piomode - Initialize host controller PATA PIO timings
+ *     @ap: Port whose timings we are configuring
+ *     @adev: um
+ *
+ *     Set PIO mode for device, in host controller PCI config space.
+ *
+ *     LOCKING:
+ *     None (inherited from caller).
+ */
+
+static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
+{
+       unsigned int pio        = adev->pio_mode - XFER_PIO_0;
+       struct pci_dev *dev     = to_pci_dev(ap->host->dev);
+       unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
+       u16 idetm_data;
+       int control = 0;
+
+       /*
+        *      See Intel Document 298600-004 for the timing programing rules
+        *      for PIIX/ICH. The 8213 is a clone so very similar
+        */
+
+       static const     /* ISP  RTC */
+       u8 timings[][2] = { { 0, 0 },
+                           { 0, 0 },
+                           { 1, 0 },
+                           { 2, 1 },
+                           { 2, 3 }, };
+
+       if (pio > 2)
+               control |= 1;   /* TIME1 enable */
+       if (ata_pio_need_iordy(adev))   /* PIO 3/4 require IORDY */
+               control |= 2;   /* IORDY enable */
+       /* Bit 2 is set for ATAPI on the IT8213 - reverse of ICH/PIIX */
+       if (adev->class != ATA_DEV_ATA)
+               control |= 4;
+
+       pci_read_config_word(dev, idetm_port, &idetm_data);
+
+       /* Enable PPE, IE and TIME as appropriate */
+
+       if (adev->devno == 0) {
+               idetm_data &= 0xCCF0;
+               idetm_data |= control;
+               idetm_data |= (timings[pio][0] << 12) |
+                       (timings[pio][1] << 8);
+       } else {
+               u8 slave_data;
+
+               idetm_data &= 0xCC0F;
+               idetm_data |= (control << 4);
+
+               /* Slave timing in seperate register */
+               pci_read_config_byte(dev, 0x44, &slave_data);
+               slave_data &= 0xF0;
+               slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;
+               pci_write_config_byte(dev, 0x44, slave_data);
+       }
+
+       idetm_data |= 0x4000;   /* Ensure SITRE is enabled */
+       pci_write_config_word(dev, idetm_port, idetm_data);
+}
+
+/**
+ *     it8213_set_dmamode - Initialize host controller PATA DMA timings
+ *     @ap: Port whose timings we are configuring
+ *     @adev: Device to program
+ *
+ *     Set UDMA/MWDMA mode for device, in host controller PCI config space.
+ *     This device is basically an ICH alike.
+ *
+ *     LOCKING:
+ *     None (inherited from caller).
+ */
+
+static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev)
+{
+       struct pci_dev *dev     = to_pci_dev(ap->host->dev);
+       u16 master_data;
+       u8 speed                = adev->dma_mode;
+       int devid               = adev->devno;
+       u8 udma_enable;
+
+       static const     /* ISP  RTC */
+       u8 timings[][2] = { { 0, 0 },
+                           { 0, 0 },
+                           { 1, 0 },
+                           { 2, 1 },
+                           { 2, 3 }, };
+
+       pci_read_config_word(dev, 0x40, &master_data);
+       pci_read_config_byte(dev, 0x48, &udma_enable);
+
+       if (speed >= XFER_UDMA_0) {
+               unsigned int udma = adev->dma_mode - XFER_UDMA_0;
+               u16 udma_timing;
+               u16 ideconf;
+               int u_clock, u_speed;
+
+               /* Clocks follow the PIIX style */
+               u_speed = min(2 - (udma & 1), udma);
+               if (udma == 5)
+                       u_clock = 0x1000;       /* 100Mhz */
+               else if (udma > 2)
+                       u_clock = 1;            /* 66Mhz */
+               else
+                       u_clock = 0;            /* 33Mhz */
+
+               udma_enable |= (1 << devid);
+
+               /* Load the UDMA mode number */
+               pci_read_config_word(dev, 0x4A, &udma_timing);
+               udma_timing &= ~(3 << (4 * devid));
+               udma_timing |= (udma & 3) << (4 * devid);
+               pci_write_config_word(dev, 0x4A, udma_timing);
+
+               /* Load the clock selection */
+               pci_read_config_word(dev, 0x54, &ideconf);
+               ideconf &= ~(0x1001 << devid);
+               ideconf |= u_clock << devid;
+               pci_write_config_word(dev, 0x54, ideconf);
+       } else {
+               /*
+                * MWDMA is driven by the PIO timings. We must also enable
+                * IORDY unconditionally along with TIME1. PPE has already
+                * been set when the PIO timing was set.
+                */
+               unsigned int mwdma      = adev->dma_mode - XFER_MW_DMA_0;
+               unsigned int control;
+               u8 slave_data;
+               static const unsigned int needed_pio[3] = {
+                       XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
+               };
+               int pio = needed_pio[mwdma] - XFER_PIO_0;
+
+               control = 3;    /* IORDY|TIME1 */
+
+               /* If the drive MWDMA is faster than it can do PIO then
+                  we must force PIO into PIO0 */
+
+               if (adev->pio_mode < needed_pio[mwdma])
+                       /* Enable DMA timing only */
+                       control |= 8;   /* PIO cycles in PIO0 */
+
+               if (devid) {    /* Slave */
+                       master_data &= 0xFF4F;  /* Mask out IORDY|TIME1|DMAONLY */
+                       master_data |= control << 4;
+                       pci_read_config_byte(dev, 0x44, &slave_data);
+                       slave_data &= (0x0F + 0xE1 * ap->port_no);
+                       /* Load the matching timing */
+                       slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
+                       pci_write_config_byte(dev, 0x44, slave_data);
+               } else {        /* Master */
+                       master_data &= 0xCCF4;  /* Mask out IORDY|TIME1|DMAONLY
+                                                  and master timing bits */
+                       master_data |= control;
+                       master_data |=
+                               (timings[pio][0] << 12) |
+                               (timings[pio][1] << 8);
+               }
+               udma_enable &= ~(1 << devid);
+               pci_write_config_word(dev, 0x40, master_data);
+       }
+       pci_write_config_byte(dev, 0x48, udma_enable);
+}
+
+static struct scsi_host_template it8213_sht = {
+       .module                 = THIS_MODULE,
+       .name                   = DRV_NAME,
+       .ioctl                  = ata_scsi_ioctl,
+       .queuecommand           = ata_scsi_queuecmd,
+       .can_queue              = ATA_DEF_QUEUE,
+       .this_id                = ATA_SHT_THIS_ID,
+       .sg_tablesize           = LIBATA_MAX_PRD,
+       .max_sectors            = ATA_MAX_SECTORS,
+       .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
+       .emulated               = ATA_SHT_EMULATED,
+       .use_clustering         = ATA_SHT_USE_CLUSTERING,
+       .proc_name              = DRV_NAME,
+       .dma_boundary           = ATA_DMA_BOUNDARY,
+       .slave_configure        = ata_scsi_slave_config,
+       .bios_param             = ata_std_bios_param,
+       .resume                 = ata_scsi_device_resume,
+       .suspend                = ata_scsi_device_suspend,
+};
+
+static const struct ata_port_operations it8213_ops = {
+       .port_disable           = ata_port_disable,
+       .set_piomode            = it8213_set_piomode,
+       .set_dmamode            = it8213_set_dmamode,
+       .mode_filter            = ata_pci_default_filter,
+
+       .tf_load                = ata_tf_load,
+       .tf_read                = ata_tf_read,
+       .check_status           = ata_check_status,
+       .exec_command           = ata_exec_command,
+       .dev_select             = ata_std_dev_select,
+
+       .freeze                 = ata_bmdma_freeze,
+       .thaw                   = ata_bmdma_thaw,
+       .error_handler          = it8213_error_handler,
+       .post_internal_cmd      = ata_bmdma_post_internal_cmd,
+
+       .bmdma_setup            = ata_bmdma_setup,
+       .bmdma_start            = ata_bmdma_start,
+       .bmdma_stop             = ata_bmdma_stop,
+       .bmdma_status           = ata_bmdma_status,
+       .qc_prep                = ata_qc_prep,
+       .qc_issue               = ata_qc_issue_prot,
+       .data_xfer              = ata_pio_data_xfer,
+
+       .irq_handler            = ata_interrupt,
+       .irq_clear              = ata_bmdma_irq_clear,
+
+       .port_start             = ata_port_start,
+       .port_stop              = ata_port_stop,
+       .host_stop              = ata_host_stop,
+};
+
+
+/**
+ *     it8213_init_one - Register 8213 ATA PCI device with kernel services
+ *     @pdev: PCI device to register
+ *     @ent: Entry in it8213_pci_tbl matching with @pdev
+ *
+ *     Called from kernel PCI layer.
+ *
+ *     LOCKING:
+ *     Inherited from PCI layer (may sleep).
+ *
+ *     RETURNS:
+ *     Zero on success, or -ERRNO value.
+ */
+
+static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+       static int printed_version;
+       static struct ata_port_info info = {
+               .sht            = &it8213_sht,
+               .flags          = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+               .pio_mask       = 0x1f, /* pio0-4 */
+               .mwdma_mask     = 0x07, /* mwdma0-2 */
+               .udma_mask      = 0x1f, /* UDMA 100 */
+               .port_ops       = &it8213_ops,
+       };
+       static struct ata_port_info *port_info[2] = { &info, &info };
+
+       if (!printed_version++)
+               dev_printk(KERN_DEBUG, &pdev->dev,
+                          "version " DRV_VERSION "\n");
+
+       /* Current IT8213 stuff is single port */
+       return ata_pci_init_one(pdev, port_info, 1);
+}
+
+static const struct pci_device_id it8213_pci_tbl[] = {
+       { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8213), },
+
+       { }     /* terminate list */
+};
+
+static struct pci_driver it8213_pci_driver = {
+       .name                   = DRV_NAME,
+       .id_table               = it8213_pci_tbl,
+       .probe                  = it8213_init_one,
+       .remove                 = ata_pci_remove_one,
+       .suspend                = ata_pci_device_suspend,
+       .resume                 = ata_pci_device_resume,
+};
+
+static int __init it8213_init(void)
+{
+       return pci_register_driver(&it8213_pci_driver);
+}
+
+static void __exit it8213_exit(void)
+{
+       pci_unregister_driver(&it8213_pci_driver);
+}
+
+module_init(it8213_init);
+module_exit(it8213_exit);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("SCSI low-level driver for the ITE 8213");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, it8213_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
index 6252cb9092dd836a91a380f6715650a85fe5ef03..4c8966a082af11da95a8469afcc9917a0931f6f6 100644 (file)
 #define PCI_VENDOR_ID_ITE              0x1283
 #define PCI_DEVICE_ID_ITE_8211         0x8211
 #define PCI_DEVICE_ID_ITE_8212         0x8212
+#define PCI_DEVICE_ID_ITE_8213         0x8213
 #define PCI_DEVICE_ID_ITE_8872         0x8872
 #define PCI_DEVICE_ID_ITE_IT8330G_0    0xe886