select HARDIRQS_SW_RESEND
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
- select HAVE_ARCH_SECCOMP_FILTER
+ select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
select HAVE_ARCH_TRACEHOOK
select HAVE_BPF_JIT
select HAVE_CONTEXT_TRACKING
bool "Architected timer support"
depends on CPU_V7
select ARM_ARCH_TIMER
+ select GENERIC_CLOCKEVENTS
help
This option enables support for the ARM architected timer
config OABI_COMPAT
bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
depends on AEABI && !THUMB2_KERNEL
- default y
help
This option preserves the old syscall interface along with the
new (ARM EABI) one. It also provides a compatibility layer to
in memory differs between the legacy ABI and the new ARM EABI
(only for non "thumb" binaries). This option adds a tiny
overhead to all syscalls and produces a slightly larger kernel.
+
+ The seccomp filter system will not be available when this is
+ selected, since there is no way yet to sensibly distinguish
+ between calling conventions during filtering.
+
If you know you'll be using only pure EABI user space then you
can say N here. If this option is not selected and you attempt
to execute a legacy ABI binary then the result will be
UNPREDICTABLE (in fact it can be predicted that it won't work
- at all). If in doubt say Y.
+ at all). If in doubt say N.
config ARCH_HAS_HOLES_MEMORYMODEL
bool
static inline unsigned long __phys_to_virt(phys_addr_t x)
{
unsigned long t;
- __pv_stub(x, t, "sub", __PV_BITS_31_24);
+
+ /*
+ * 'unsigned long' cast discard upper word when
+ * phys_addr_t is 64 bit, and makes sure that inline
+ * assembler expression receives 32 bit argument
+ * in place where 'r' 32 bit operand is expected.
+ */
+ __pv_stub((unsigned long) x, t, "sub", __PV_BITS_31_24);
return t;
}
teq r0, #0x0 @ '0' on actual UP A9 hardware
beq __fixup_smp_on_up @ So its an A9 UP
ldr r0, [r0, #4] @ read SCU Config
+ARM_BE8(rev r0, r0) @ byteswap if big endian
and r0, r0, #0x3 @ number of CPUs
teq r0, #0x0 @ is 1?
movne pc, lr
ldrcc r7, [r4], #4 @ use branch for delay slot
bcc 1b
bx lr
+#else
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ moveq r0, #0x00004000 @ set bit 22, mov to mvn instruction
#else
moveq r0, #0x400000 @ set bit 22, mov to mvn instruction
+#endif
b 2f
1: ldr ip, [r7, r3]
#ifdef CONFIG_CPU_ENDIAN_BE8
tst ip, #0x000f0000 @ check the rotation field
orrne ip, ip, r6, lsl #24 @ mask in offset bits 31-24
biceq ip, ip, #0x00004000 @ clear bit 22
- orreq ip, ip, r0, lsl #24 @ mask in offset bits 7-0
+ orreq ip, ip, r0 @ mask in offset bits 7-0
#else
bic ip, ip, #0x000000ff
tst ip, #0xf00 @ check the rotation field
memcpy(vectors + 0xfe0, vectors + 0xfe8, 4);
}
#else
-static void __init kuser_init(void *vectors)
+static inline void __init kuser_init(void *vectors)
{
}
#endif
and r3, r0, #31 @ Get bit offset
mov r0, r0, lsr #5
add r1, r1, r0, lsl #2 @ Get word offset
-#if __LINUX_ARM_ARCH__ >= 7
+#if __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
.arch_extension mp
ALT_SMP(W(pldw) [r1])
ALT_UP(W(nop))
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
break;
}
- printk("Memory policy: ECC %sabled, Data cache %s\n",
- ecc_mask ? "en" : "dis", cp->policy);
+ pr_info("Memory policy: %sData cache %s\n",
+ ecc_mask ? "ECC enabled, " : "", cp->policy);
for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
struct mem_type *t = &mem_types[i];
#include <asm/mach/arch.h>
#include <asm/cputype.h>
#include <asm/mpu.h>
+#include <asm/procinfo.h>
#include "mm.h"
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
-.equ cpu_v7_suspend_size, 4 * 8
+.equ cpu_v7_suspend_size, 4 * 9
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_v7_do_suspend)
stmfd sp!, {r4 - r10, lr}
stmia r0!, {r4 - r5}
#ifdef CONFIG_MMU
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
+#ifdef CONFIG_ARM_LPAE
+ mrrc p15, 1, r5, r7, c2 @ TTB 1
+#else
mrc p15, 0, r7, c2, c0, 1 @ TTB 1
+#endif
mrc p15, 0, r11, c2, c0, 2 @ TTB control register
#endif
mrc p15, 0, r8, c1, c0, 0 @ Control register
mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
- stmia r0, {r6 - r11}
+ stmia r0, {r5 - r11}
ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_v7_do_suspend)
ldmia r0!, {r4 - r5}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID
- ldmia r0, {r6 - r11}
+ ldmia r0, {r5 - r11}
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
-#ifndef CONFIG_ARM_LPAE
+#ifdef CONFIG_ARM_LPAE
+ mcrr p15, 0, r1, ip, c2 @ TTB 0
+ mcrr p15, 1, r5, r7, c2 @ TTB 1
+#else
ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
-#endif
mcr p15, 0, r1, c2, c0, 0 @ TTB 0
mcr p15, 0, r7, c2, c0, 1 @ TTB 1
+#endif
mcr p15, 0, r11, c2, c0, 2 @ TTB control register
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
projects / linux-drm-fsl-dcu.git / commitdiff