[ALSA] hda-codec - Add asus model to ALC861 codec
authorMariusz Domanski <mariook@wp.pl>
Mon, 23 Oct 2006 11:42:56 +0000 (13:42 +0200)
committerJaroslav Kysela <perex@suse.cz>
Fri, 9 Feb 2007 08:01:08 +0000 (09:01 +0100)
This patch adds support for Asus laptops (for example: Asus
A6Rp-AP002).

Signed-off-by: Mariusz Domanski <mariook@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Documentation/sound/alsa/ALSA-Configuration.txt
sound/pci/hda/patch_realtek.c

index feb97bd711f9214ac5730fa9c22aff6557afcf20..e4255f69b3000f0b90080c9b0f952c4de39ed321 100644 (file)
@@ -831,6 +831,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
          3stack-660    3-jack (for ALC660)
          uniwill-m31   Uniwill M31 laptop
          toshiba       Toshiba laptop support
+         asus          Asus laptop support
          auto          auto-config reading BIOS (default)
 
        CMI9880
index 04749d2f7bdf7e13c60d942aaf050d3f689e5cb7..990714e2bcb33a2d0472c411f9ce20e99ba3d244 100644 (file)
@@ -100,6 +100,7 @@ enum {
        ALC861_6ST_DIG,
        ALC861_UNIWILL_M31,
        ALC861_TOSHIBA,
+       ALC861_ASUS,
        ALC861_AUTO,
        ALC861_MODEL_LAST,
 };
@@ -6654,6 +6655,44 @@ static struct hda_channel_mode alc861_uniwill_m31_modes[2] = {
        { 4, alc861_uniwill_m31_ch4_init },
 };
 
+/* Set mic1 and line-in as input and unmute the mixer */
+static struct hda_verb alc861_asus_ch2_init[] = {
+       /* set pin widget 1Ah (line in) for input */
+       { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+       /* set pin widget 18h (mic1/2) for input, for mic also enable the vref */
+       { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+
+       { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
+#if 0
+       { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
+       { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, /*line-in*/
+#endif
+       { } /* end */
+};
+/* Set mic1 nad line-in as output and mute mixer */
+static struct hda_verb alc861_asus_ch6_init[] = {
+       /* set pin widget 1Ah (line in) for output (Back Surround)*/
+       { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+       /* { 0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
+       /* set pin widget 18h (mic1) for output (CLFE)*/
+       { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+       /* { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
+       { 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 },
+       { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
+
+       { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
+#if 0
+       { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
+       { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, /*line in*/
+#endif
+       { } /* end */
+};
+
+static struct hda_channel_mode alc861_asus_modes[2] = {
+       { 2, alc861_asus_ch2_init },
+       { 6, alc861_asus_ch6_init },
+};
+
 /* patch-ALC861 */
 
 static struct snd_kcontrol_new alc861_base_mixer[] = {
@@ -6794,6 +6833,49 @@ static struct snd_kcontrol_new alc861_uniwill_m31_mixer[] = {
        },
        { } /* end */
 };                     
+
+static struct snd_kcontrol_new alc861_asus_mixer[] = {
+        /* output mixer control */
+       HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
+       HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
+       HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
+       HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
+       HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT),
+
+       /* Input mixer control */
+       HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
+       HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+       HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
+       HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
+       HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
+       HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
+       HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
+       HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
+       HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
+       HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_OUTPUT), /* was HDA_INPUT (why?) */
+       /* Capture mixer control */
+       HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+       HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+       {
+               .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+               .name = "Capture Source",
+               .count = 1,
+               .info = alc_mux_enum_info,
+               .get = alc_mux_enum_get,
+               .put = alc_mux_enum_put,
+       },
+       {
+               .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+               .name = "Channel Mode",
+               .info = alc_ch_mode_info,
+               .get = alc_ch_mode_get,
+               .put = alc_ch_mode_put,
+                .private_value = ARRAY_SIZE(alc861_asus_modes),
+       },
+       { }
+};                     
+
        
 /*
  * generic initialization of ADC, input mixers and output mixers
@@ -6983,6 +7065,68 @@ static struct hda_verb alc861_uniwill_m31_init_verbs[] = {
        { }
 };
 
+static struct hda_verb alc861_asus_init_verbs[] = {
+       /*
+        * Unmute ADC0 and set the default input to mic-in
+        */
+       /* port-A for surround (rear panel) | according to codec#0 this is the HP jack*/
+       { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, /* was 0x00 */
+       /* route front PCM to HP */
+       { 0x0e, AC_VERB_SET_CONNECT_SEL, 0x01 },
+       /* port-B for mic-in (rear panel) with vref */
+       { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+       /* port-C for line-in (rear panel) */
+       { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+       /* port-D for Front */
+       { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+       { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
+       /* port-E for HP out (front panel) */
+       { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, /* this has to be set to VREF80 */
+       /* route front PCM to HP */
+       { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
+       /* port-F for mic-in (front panel) with vref */
+       { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+       /* port-G for CLFE (rear panel) */
+       { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+       /* port-H for side (rear panel) */
+       { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+       /* CD-in */
+       { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+       /* route front mic to ADC1*/
+       {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+       {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+       /* Unmute DAC0~3 & spdif out*/
+       {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+       {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+       {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+       {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+       {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+       /* Unmute Mixer 14 (mic) 1c (Line in)*/
+       {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+        {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+       {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+        {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+       
+       /* Unmute Stereo Mixer 15 */
+       {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+       {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+       {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+       {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c          }, /* Output 0~12 step */
+
+       {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+       {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+       {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+       {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+       {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+       {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+       {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+       {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+       {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, /* hp used DAC 3 (Front) */
+       {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+       { }
+};
+
+
 /*
  * generic initialization of ADC, input mixers and output mixers
  */
@@ -7354,10 +7498,13 @@ static struct hda_board_config alc861_cfg_tbl[] = {
        { .pci_subvendor = 0x1584, .pci_subdevice = 0x9072,
          .config = ALC861_UNIWILL_M31 },
        { .modelname = "toshiba", .config = ALC861_TOSHIBA },
-       { .pci_subvendor = 0x1043, .pci_subdevice = 0x1338,
-         .config = ALC861_TOSHIBA },
        { .pci_subvendor = 0x1179, .pci_subdevice = 0xff10,
          .config = ALC861_TOSHIBA },
+       { .modelname = "asus", .config = ALC861_ASUS},
+       { .pci_subvendor = 0x1043, .pci_subdevice = 0x1393,
+         .config = ALC861_ASUS },
+       { .pci_subvendor = 0x1043, .pci_subdevice = 0x1338,
+         .config = ALC861_ASUS },
        { .modelname = "auto", .config = ALC861_AUTO },
        {}
 };
@@ -7438,6 +7585,20 @@ static struct alc_config_preset alc861_presets[] = {
                .unsol_event = alc861_toshiba_unsol_event,
                .init_hook = alc861_toshiba_automute,
        },
+       [ALC861_ASUS] = {
+               .mixers = { alc861_asus_mixer },
+               .init_verbs = { alc861_asus_init_verbs },
+               .num_dacs = ARRAY_SIZE(alc861_dac_nids),
+               .dac_nids = alc861_dac_nids,
+               .dig_out_nid = ALC861_DIGOUT_NID,
+               .num_channel_mode = ARRAY_SIZE(alc861_asus_modes),
+               .channel_mode = alc861_asus_modes,
+               .need_dac_fix = 1,
+               .hp_nid = 0x06,
+               .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
+               .adc_nids = alc861_adc_nids,
+               .input_mux = &alc861_capture_source,
+       },
 };