/*
- * arch/powerpc/sysdev/qe_lib/ucc_fast.c
- *
- * QE UCC Fast API Set - UCC Fast specific routines implementations.
- *
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
+ * Description:
+ * QE UCC Fast API Set - UCC Fast specific routines implementations.
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
#include <asm/ucc.h>
#include <asm/ucc_fast.h>
-#define uccf_printk(level, format, arg...) \
- printk(level format "\n", ## arg)
-
-#define uccf_dbg(format, arg...) \
- uccf_printk(KERN_DEBUG , format , ## arg)
-#define uccf_err(format, arg...) \
- uccf_printk(KERN_ERR , format , ## arg)
-#define uccf_info(format, arg...) \
- uccf_printk(KERN_INFO , format , ## arg)
-#define uccf_warn(format, arg...) \
- uccf_printk(KERN_WARNING , format , ## arg)
-
-#ifdef UCCF_VERBOSE_DEBUG
-#define uccf_vdbg uccf_dbg
-#else
-#define uccf_vdbg(fmt, args...) do { } while (0)
-#endif /* UCCF_VERBOSE_DEBUG */
-
void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
{
- uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num);
- uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs);
+ printk(KERN_INFO "UCC%d Fast registers:", uccf->uf_info->ucc_num);
+ printk(KERN_INFO "Base address: 0x%08x", (u32) uccf->uf_regs);
- uccf_info("gumr : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "gumr : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
- uccf_info("upsmr : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "upsmr : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
- uccf_info("utodr : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "utodr : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
- uccf_info("udsr : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "udsr : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
- uccf_info("ucce : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "ucce : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
- uccf_info("uccm : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "uccm : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
- uccf_info("uccs : addr - 0x%08x, val - 0x%02x",
+ printk(KERN_INFO "uccs : addr - 0x%08x, val - 0x%02x",
(u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
- uccf_info("urfb : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "urfb : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
- uccf_info("urfs : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "urfs : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
- uccf_info("urfet : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "urfet : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
- uccf_info("urfset: addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "urfset: addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->urfset,
in_be16(&uccf->uf_regs->urfset));
- uccf_info("utfb : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "utfb : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
- uccf_info("utfs : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "utfs : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
- uccf_info("utfet : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "utfet : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
- uccf_info("utftt : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "utftt : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
- uccf_info("utpt : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "utpt : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
- uccf_info("urtry : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "urtry : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
- uccf_info("guemr : addr - 0x%08x, val - 0x%02x",
+ printk(KERN_INFO "guemr : addr - 0x%08x, val - 0x%02x",
(u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
}
u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
{
switch (uccf_num) {
- case 0: return QE_CR_SUBBLOCK_UCCFAST1;
+ case 0: return QE_CR_SUBBLOCK_UCCFAST1;
case 1: return QE_CR_SUBBLOCK_UCCFAST2;
case 2: return QE_CR_SUBBLOCK_UCCFAST3;
case 3: return QE_CR_SUBBLOCK_UCCFAST4;
case 4: return QE_CR_SUBBLOCK_UCCFAST5;
case 5: return QE_CR_SUBBLOCK_UCCFAST6;
case 6: return QE_CR_SUBBLOCK_UCCFAST7;
- case 7: return QE_CR_SUBBLOCK_UCCFAST8;
+ case 7: return QE_CR_SUBBLOCK_UCCFAST8;
default: return QE_CR_SUBBLOCK_INVALID;
}
}
{
struct ucc_fast_private *uccf;
struct ucc_fast *uf_regs;
- u32 gumr = 0;
+ u32 gumr;
int ret;
- uccf_vdbg("%s: IN", __FUNCTION__);
-
if (!uf_info)
return -EINVAL;
/* check if the UCC port number is in range. */
if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
- uccf_err("ucc_fast_init: Illegal UCC number!");
+ printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
return -EINVAL;
}
/* Check that 'max_rx_buf_length' is properly aligned (4). */
if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
- uccf_err("ucc_fast_init: max_rx_buf_length not aligned.");
+ printk(KERN_ERR "%s: max_rx_buf_length not aligned", __FUNCTION__);
return -EINVAL;
}
/* Validate Virtual Fifo register values */
if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register urfs too small.");
+ printk(KERN_ERR "%s: urfs is too small", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register urfs not aligned.");
+ printk(KERN_ERR "%s: urfs is not aligned", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register urfet not aligned.");
+ printk(KERN_ERR "%s: urfet is not aligned.", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register urfset not aligned.");
+ printk(KERN_ERR "%s: urfset is not aligned", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register utfs not aligned.");
+ printk(KERN_ERR "%s: utfs is not aligned", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register utfet not aligned.");
+ printk(KERN_ERR "%s: utfet is not aligned", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register utftt not aligned.");
+ printk(KERN_ERR "%s: utftt is not aligned", __FUNCTION__);
return -EINVAL;
}
uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
if (!uccf) {
- uccf_err
- ("ucc_fast_init: No memory for UCC slow data structure!");
+ printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
return -ENOMEM;
}
/* Fill fast UCC structure */
uccf->uf_info = uf_info;
/* Set the PHY base address */
- uccf->uf_regs =
- (struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast));
+ uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
if (uccf->uf_regs == NULL) {
- uccf_err
- ("ucc_fast_init: No memory map for UCC slow controller!");
+ printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
return -ENOMEM;
}
/* Init Guemr register */
if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) {
- uccf_err("ucc_fast_init: Could not init the guemr register.");
+ printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
ucc_fast_free(uccf);
return ret;
}
if ((ret = ucc_set_type(uf_info->ucc_num,
(struct ucc_common *) (uf_regs),
UCC_SPEED_TYPE_FAST))) {
- uccf_err("ucc_fast_init: Could not set type to fast.");
+ printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
ucc_fast_free(uccf);
return ret;
}
/* Set GUMR */
/* For more details see the hardware spec. */
- /* gumr starts as zero. */
+ gumr = uf_info->ttx_trx;
if (uf_info->tci)
gumr |= UCC_FAST_GUMR_TCI;
- gumr |= uf_info->ttx_trx;
if (uf_info->cdp)
gumr |= UCC_FAST_GUMR_CDP;
if (uf_info->ctsp)
uccf->ucc_fast_tx_virtual_fifo_base_offset =
qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
- uccf_err
- ("ucc_fast_init: Can not allocate MURAM memory for "
- "struct ucc_fastx_virtual_fifo_base_offset.");
+ printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__);
uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
/* Allocate memory for Rx Virtual Fifo */
uccf->ucc_fast_rx_virtual_fifo_base_offset =
- qe_muram_alloc(uf_info->urfs +
- (u32)
+ qe_muram_alloc(uf_info->urfs +
UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
- uccf_err
- ("ucc_fast_init: Can not allocate MURAM memory for "
- "ucc_fast_rx_virtual_fifo_base_offset.");
+ printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__);
uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
/* If NMSI (not Tsa), set Tx and Rx clock. */
if (!uf_info->tsa) {
/* Rx clock routing */
- if (uf_info->rx_clock != QE_CLK_NONE) {
- if (ucc_set_qe_mux_rxtx
- (uf_info->ucc_num, uf_info->rx_clock,
- COMM_DIR_RX)) {
- uccf_err
- ("ucc_fast_init: Illegal value for parameter 'RxClock'.");
- ucc_fast_free(uccf);
- return -EINVAL;
- }
+ if ((uf_info->rx_clock != QE_CLK_NONE) &&
+ ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
+ COMM_DIR_RX)) {
+ printk(KERN_ERR "%s: illegal value for RX clock",
+ __FUNCTION__);
+ ucc_fast_free(uccf);
+ return -EINVAL;
}
/* Tx clock routing */
- if (uf_info->tx_clock != QE_CLK_NONE) {
- if (ucc_set_qe_mux_rxtx
- (uf_info->ucc_num, uf_info->tx_clock,
- COMM_DIR_TX)) {
- uccf_err
- ("ucc_fast_init: Illegal value for parameter 'TxClock'.");
- ucc_fast_free(uccf);
- return -EINVAL;
- }
+ if ((uf_info->tx_clock != QE_CLK_NONE) &&
+ ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
+ COMM_DIR_TX)) {
+ printk(KERN_ERR "%s: illegal value for TX clock",
+ __FUNCTION__);
+ ucc_fast_free(uccf);
+ return -EINVAL;
}
}
/* First, clear anything pending at UCC level,
* otherwise, old garbage may come through
- * as soon as the dam is opened
- * Writing '1' clears
- */
+ * as soon as the dam is opened. */
+
+ /* Writing '1' clears */
out_be32(&uf_regs->ucce, 0xffffffff);
*uccf_ret = uccf;
#include <linux/stddef.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
#include <asm/ucc.h>
#include <asm/ucc_slow.h>
-#define uccs_printk(level, format, arg...) \
- printk(level format "\n", ## arg)
-
-#define uccs_dbg(format, arg...) \
- uccs_printk(KERN_DEBUG , format , ## arg)
-#define uccs_err(format, arg...) \
- uccs_printk(KERN_ERR , format , ## arg)
-#define uccs_info(format, arg...) \
- uccs_printk(KERN_INFO , format , ## arg)
-#define uccs_warn(format, arg...) \
- uccs_printk(KERN_WARNING , format , ## arg)
-
-#ifdef UCCS_VERBOSE_DEBUG
-#define uccs_vdbg uccs_dbg
-#else
-#define uccs_vdbg(fmt, args...) do { } while (0)
-#endif /* UCCS_VERBOSE_DEBUG */
-
u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
{
switch (uccs_num) {
int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
{
+ struct ucc_slow_private *uccs;
u32 i;
struct ucc_slow *us_regs;
u32 gumr;
- u8 function_code = 0;
- u8 *bd;
- struct ucc_slow_private *uccs;
+ struct qe_bd *bd;
u32 id;
u32 command;
- int ret;
-
- uccs_vdbg("%s: IN", __FUNCTION__);
+ int ret = 0;
if (!us_info)
return -EINVAL;
/* check if the UCC port number is in range. */
if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
- uccs_err("ucc_slow_init: Illegal UCC number!");
+ printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
return -EINVAL;
}
/*
* Set mrblr
* Check that 'max_rx_buf_length' is properly aligned (4), unless
- * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
+ * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
* case when QE accepts 32 bits at a time.
*/
if ((!us_info->rfw) &&
(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
- uccs_err("max_rx_buf_length not aligned.");
+ printk(KERN_ERR "max_rx_buf_length not aligned.");
return -EINVAL;
}
uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
if (!uccs) {
- uccs_err
- ("ucc_slow_init: No memory for UCC slow data structure!");
+ printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
return -ENOMEM;
}
/* Fill slow UCC structure */
uccs->us_info = us_info;
+ /* Set the PHY base address */
+ uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
+ if (uccs->us_regs == NULL) {
+ printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
+ return -ENOMEM;
+ }
+
uccs->saved_uccm = 0;
uccs->p_rx_frame = 0;
- uccs->us_regs = us_info->regs;
us_regs = uccs->us_regs;
uccs->p_ucce = (u16 *) & (us_regs->ucce);
uccs->p_uccm = (u16 *) & (us_regs->uccm);
#endif /* STATISTICS */
/* Get PRAM base */
- uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE,
- ALIGNMENT_OF_UCC_SLOW_PRAM);
+ uccs->us_pram_offset =
+ qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
if (IS_MURAM_ERR(uccs->us_pram_offset)) {
- uccs_err
- ("ucc_slow_init: Can not allocate MURAM memory "
- "for Slow UCC.");
+ printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
ucc_slow_free(uccs);
return -ENOMEM;
}
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
- (u32) uccs->us_pram_offset);
+ uccs->us_pram_offset);
uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
/* Init Guemr register */
if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) {
- uccs_err("ucc_slow_init: Could not init the guemr register.");
+ printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
ucc_slow_free(uccs);
return ret;
}
if ((ret = ucc_set_type(us_info->ucc_num,
(struct ucc_common *) (us_info->regs),
UCC_SPEED_TYPE_SLOW))) {
- uccs_err("ucc_slow_init: Could not init the guemr register.");
+ printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
ucc_slow_free(uccs);
return ret;
}
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_MURAM_ERR(uccs->rx_base_offset)) {
- uccs_err("ucc_slow_init: No memory for Rx BD's.");
+ printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__);
uccs->rx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_MURAM_ERR(uccs->tx_base_offset)) {
- uccs_err("ucc_slow_init: No memory for Tx BD's.");
+ printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
uccs->tx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
/* Init Tx bds */
bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
- for (i = 0; i < us_info->tx_bd_ring_len; i++) {
+ for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
/* clear bd buffer */
- out_be32(&(((struct qe_bd *)bd)->buf), 0);
+ out_be32(&bd->buf, 0);
/* set bd status and length */
- out_be32((u32*)bd, 0);
- bd += sizeof(struct qe_bd);
+ out_be32((u32 *) bd, 0);
+ bd++;
}
- bd -= sizeof(struct qe_bd);
- /* set bd status and length */
- out_be32((u32*)bd, T_W); /* for last BD set Wrap bit */
+ /* for last BD set Wrap bit */
+ out_be32(&bd->buf, 0);
+ out_be32((u32 *) bd, cpu_to_be32(T_W));
/* Init Rx bds */
bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
- for (i = 0; i < us_info->rx_bd_ring_len; i++) {
+ for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
/* set bd status and length */
out_be32((u32*)bd, 0);
/* clear bd buffer */
- out_be32(&(((struct qe_bd *)bd)->buf), 0);
- bd += sizeof(struct qe_bd);
+ out_be32(&bd->buf, 0);
+ bd++;
}
- bd -= sizeof(struct qe_bd);
- /* set bd status and length */
- out_be32((u32*)bd, R_W); /* for last BD set Wrap bit */
+ /* for last BD set Wrap bit */
+ out_be32((u32*)bd, cpu_to_be32(R_W));
+ out_be32(&bd->buf, 0);
/* Set GUMR (For more details see the hardware spec.). */
/* gumr_h */
- gumr = 0;
- gumr |= us_info->tcrc;
+ gumr = us_info->tcrc;
if (us_info->cdp)
gumr |= UCC_SLOW_GUMR_H_CDP;
if (us_info->ctsp)
out_be32(&us_regs->gumr_h, gumr);
/* gumr_l */
- gumr = 0;
+ gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
+ us_info->diag | us_info->mode;
if (us_info->tci)
gumr |= UCC_SLOW_GUMR_L_TCI;
if (us_info->rinv)
gumr |= UCC_SLOW_GUMR_L_TINV;
if (us_info->tend)
gumr |= UCC_SLOW_GUMR_L_TEND;
- gumr |= us_info->tdcr;
- gumr |= us_info->rdcr;
- gumr |= us_info->tenc;
- gumr |= us_info->renc;
- gumr |= us_info->diag;
- gumr |= us_info->mode;
out_be32(&us_regs->gumr_l, gumr);
/* Function code registers */
- /* function_code has initial value 0 */
/* if the data is in cachable memory, the 'global' */
/* in the function code should be set. */
- function_code |= us_info->data_mem_part;
- function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */
- uccs->us_pram->tfcr = function_code;
- uccs->us_pram->rfcr = function_code;
+ uccs->us_pram->tfcr = uccs->us_pram->rfcr =
+ us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT;
/* rbase, tbase are offsets from MURAM base */
out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
/* If NMSI (not Tsa), set Tx and Rx clock. */
if (!us_info->tsa) {
/* Rx clock routing */
- if (ucc_set_qe_mux_rxtx
- (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) {
- uccs_err
- ("ucc_slow_init: Illegal value for parameter"
- " 'RxClock'.");
+ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
+ COMM_DIR_RX)) {
+ printk(KERN_ERR "%s: illegal value for RX clock",
+ __FUNCTION__);
ucc_slow_free(uccs);
return -EINVAL;
}
/* Tx clock routing */
- if (ucc_set_qe_mux_rxtx(us_info->ucc_num,
- us_info->tx_clock, COMM_DIR_TX)) {
- uccs_err
- ("ucc_slow_init: Illegal value for parameter "
- "'TxClock'.");
+ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
+ COMM_DIR_TX)) {
+ printk(KERN_ERR "%s: illegal value for TX clock",
+ __FUNCTION__);
ucc_slow_free(uccs);
return -EINVAL;
}
}
- /*
- * INTERRUPTS
- */
/* Set interrupt mask register at UCC level. */
out_be16(&us_regs->uccm, us_info->uccm_mask);
- /* First, clear anything pending at UCC level, */
- /* otherwise, old garbage may come through */
- /* as soon as the dam is opened. */
+ /* First, clear anything pending at UCC level,
+ * otherwise, old garbage may come through
+ * as soon as the dam is opened. */
/* Writing '1' clears */
out_be16(&us_regs->ucce, 0xffff);
kfree(uccs);
}
+
+
projects / linux-drm-fsl-dcu.git / commitdiff