races, contains a naming policy within the kernel that is
against the LSB, and can be replaced by using udev.
The files fs/devfs/*, include/linux/devfs_fs*.h were removed,
- along with the the assorted devfs function calls throughout the
+ along with the assorted devfs function calls throughout the
kernel tree.
Users:
usually register later during booting, or by module loading.
- Registering a driver using platform_driver_probe() works just like
- using platform_driver_register(), except that the the driver won't
+ using platform_driver_register(), except that the driver won't
be probed later if another device registers. (Which is OK, since
this interface is only for use with non-hotpluggable devices.)
from user space. The NetLabel communication layer uses a message based
protocol built on top of the Generic NETLINK transport mechanism. The exact
formatting of these NetLabel messages as well as the Generic NETLINK family
-names can be found in the the 'net/netlabel/' directory as comments in the
+names can be found in the 'net/netlabel/' directory as comments in the
header files as well as in 'include/net/netlabel.h'.
* Security Module API
3.6 Register IRQ handler
~~~~~~~~~~~~~~~~~~~~~~~~
-While calling request_irq() is the the last step described here,
+While calling request_irq() is the last step described here,
this is often just another intermediate step to initialize a device.
This step can often be deferred until the device is opened for use.
Basically, it is a bus of devices, that could act more or less
as a complete entity (UCC, USB etc ). All of them should be siblings on
the "root" qe node, using the common properties from there.
- The description below applies to the the qe of MPC8360 and
+ The description below applies to the qe of MPC8360 and
more nodes and properties would be extended in the future.
i) Root QE device
# when fed the toolchain default!
#
# Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of
-# 2006-10-10 don't properly change the the predefined symbols if -EB / -EL
+# 2006-10-10 don't properly change the predefined symbols if -EB / -EL
# are used, so we kludge that here. A bug has been filed at
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413.
#
#include <linux/pci.h>
/*
- * Set the the BCM1250, etc. PCI host bridge's TRDY timeout
+ * Set the BCM1250, etc. PCI host bridge's TRDY timeout
* to the finite max.
*/
static void __init quirk_sb1250_pci(struct pci_dev *dev)
quirk_sb1250_ht);
/*
- * Set the the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
+ * Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
*/
static void __init quirk_sp1011(struct pci_dev *dev)
{
/* Fast path if we have a non-0 token, it indicates which bus we
* are on.
*
- * If the token is 0, that means either the the ioremap was done
+ * If the token is 0, that means either that the ioremap was done
* before we initialized this layer, or it's a PIO operation. We
* fallback to a low path in this case. Hopefully, internal devices
* which are ioremap'ed early should use in_XX/out_XX functions
/* This the initial entry point for a new child thread, with an appropriate
- stack in place that makes it look the the child is in the middle of an
+ stack in place that makes it look that the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
* on a queue, such as calling the unplug function after a timeout.
* A block device may call blk_sync_queue to ensure that any
* such activity is cancelled, thus allowing it to release resources
- * the the callbacks might use. The caller must already have made sure
+ * that the callbacks might use. The caller must already have made sure
* that its ->make_request_fn will not re-add plugging prior to calling
* this function.
*
}
/*
- * ->writepage to the the blockdev's mapping has to redirty the page so that the
+ * ->writepage to the blockdev's mapping has to redirty the page so that the
* VM doesn't go and steal it. We return AOP_WRITEPAGE_ACTIVATE so that the VM
* won't try to (pointlessly) write the page again for a while.
*
* \param dev DRM device.
*
* Free all pages associated with DMA buffers, the buffers and pages lists, and
- * finally the the drm_device::dma structure itself.
+ * finally the drm_device::dma structure itself.
*/
void drm_dma_takedown(drm_device_t * dev)
{
* \param address access address.
* \return pointer to the page structure.
*
- * Get the the mapping, find the real physical page to map, get the page, and
+ * Get the mapping, find the real physical page to map, get the page, and
* return it.
*/
static __inline__ struct page *drm_do_vm_shm_nopage(struct vm_area_struct *vma,
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
-/* Addresses are relative the the vertex program parameters area. */
+/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
/*
* wait for atr to become valid.
* note: it is important to lock this code. if we dont, the monitor
- * could be run between test_bit and the the call the sleep on the
+ * could be run between test_bit and the call to sleep on the
* atr-queue. if *then* the monitor detects atr valid, it will wake up
* any process on the atr-queue, *but* since we have been interrupted,
* we do not yet sleep on this queue. this would result in a missed
/*
* Now set up the hw. We have to do this ourselves as
- * the MMIO layout isnt the same as the the standard port
+ * the MMIO layout isnt the same as the standard port
* based I/O
*/
generation = get_hpsb_generation(host);
/* If we get a reset before we are done waiting, then
- * start the the waiting over again */
+ * start the waiting over again */
if (generation != g)
g = generation, i = 0;
}
#define SERIAL_HOOK_RING 0x85
#define SERIAL_HOOK_DETACH 0x8f
unsigned char Flags; /* function refinements */
- /* parameters passed by the the ATTACH request */
+ /* parameters passed by the ATTACH request */
SERIAL_INT_CB InterruptHandler; /* called on each interrupt */
SERIAL_DPC_CB DeferredHandler; /* called on hook state changes */
void *HandlerContext; /* context for both handlers */
/* aux = output, reset off */
write_usb(hfc, HFCUSB_CIRM, 0x10);
- /* set USB_SIZE to match the the wMaxPacketSize for INT or BULK transfers */
+ /* set USB_SIZE to match the wMaxPacketSize for INT or BULK transfers */
write_usb(hfc, HFCUSB_USB_SIZE,
(hfc->packet_size / 8) | ((hfc->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size);
/* enable PCM/GCI master mode */
* Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
* see dvb-usb-init.c for copyright information.
*
- * This file contains functions for initializing the the input-device and for handling remote-control-queries.
+ * This file contains functions for initializing the input-device and for handling remote-control-queries.
*/
#include "dvb-usb-common.h"
#include <linux/usb/input.h>
/*
TDA10021 - Single Chip Cable Channel Receiver driver module
- used on the the Siemens DVB-C cards
+ used on the Siemens DVB-C cards
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
* The ves1893 sometimes returns sync values that make no sense,
* because, e.g., the SIGNAL bit is 0, while some of the higher
* bits are 1 (and how can there be a CARRIER w/o a SIGNAL?).
- * Tests showed that the the VITERBI and SYNC bits are returned
+ * Tests showed that the VITERBI and SYNC bits are returned
* reliably, while the SIGNAL and CARRIER bits ar sometimes wrong.
* If such a case occurs, we read the value again, until we get a
* valid value.
endpoint = &interface->cur_altsetting->endpoint[1].desc;
- /* check if the the device has the iso in endpoint at the correct place */
+ /* check if the device has the iso in endpoint at the correct place */
if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
USB_ENDPOINT_XFER_ISOC) {
em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n");
*
* Portions of this code were also copied from usbvideo.c
*
- * Special thanks to the the whole team at Sourceforge for help making
+ * Special thanks to the whole team at Sourceforge for help making
* this driver become a reality. Notably:
* Andy Armstrong who reverse engineered the color encoding and
* Pavel Machek and Chris Cheney who worked on reverse engineering the
* index = chain_idx
*
* Calculate the number of chain buffers needed(plus 1) per I/O
- * then multiply the the maximum number of simultaneous cmds
+ * then multiply the maximum number of simultaneous cmds
*
* num_sge = num sge in request frame + last chain buffer
* scale = num sge per chain buffer if no chain element
/* Turn other PAR off so the first probe doesn't find it */
*intel1par = 0;
- /* Probe for the the size of the first Intel flash */
+ /* Probe for the size of the first Intel flash */
nettel_intel_map.size = maxsize;
nettel_intel_map.phys = intel0addr;
nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize);
* @param mtd MTD device structure
*
* OneNAND detection method:
- * Compare the the values from command with ones from register
+ * Compare the values from command with ones from register
*/
static int onenand_probe(struct mtd_info *mtd)
{
/*---------------------------- Hashing Policies -----------------------------*/
/*
- * Hash for the the output device based upon layer 3 and layer 4 data. If
+ * Hash for the output device based upon layer 3 and layer 4 data. If
* the packet is a frag or not TCP or UDP, just use layer 3 data. If it is
* altogether not IP, mimic bond_xmit_hash_policy_l2()
*/
printk (KERN_ERR "%s: transmit timed out, %s?\n", dev->name,
"network cable problem");
/* This is not a duplicate. One message for the console,
- one for the the log file */
+ one for the log file */
printk (KERN_DEBUG "%s: transmit timed out, %s?\n", dev->name,
"network cable problem");
eepro_complete_selreset(ioaddr);
* hw - Struct containing variables accessed by shared code
*
* Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
* valid.
*
* Returns:
/* Note: when loopback is set this bit becomes collision control. Setting this bit will */
/* cause a collision to be reported. */
- /* Bits 5 and 6 are used to determine the the Destination address filter mode */
+ /* Bits 5 and 6 are used to determine the Destination address filter mode */
#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
This would turn on IM for devices that is not contributing
to backlog congestion with unnecessary latency.
- We monitor the the device RX-ring and have:
+ We monitor the device RX-ring and have:
HW Interrupt Mitigation either ON or OFF.
np->tx_ring[entry].length |= DescEndRing;
/* Now acquire the irq spinlock.
- * The difficult race is the the ordering between
+ * The difficult race is the ordering between
* increasing np->cur_tx and setting DescOwned:
* - if np->cur_tx is increased first the interrupt
* handler could consider the packet as transmitted
/*
-link_status() checks the the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what.
+link_status() checks the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what.
Must be called in locked state with interrupts disabled
*/
typhoon_inc_cmd_index(&ring->lastWrite, num_cmd);
- /* "I feel a presence... another warrior is on the the mesa."
+ /* "I feel a presence... another warrior is on the mesa."
*/
wmb();
iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
/* Vitally important. If we don't do this it seems we get an
* interrupt somewhere during the power cycle, since
* hw_unavailable is already set it doesn't get ACKed, we get
- * into an interrupt loop and the the PMU decides to turn us
+ * into an interrupt loop and the PMU decides to turn us
* off. */
disable_irq(dev->irq);
/*
* The room for the SCCB (only for writing) is not equal to a pages size
- * (as it is specified as the maximum size in the the SCLP documentation)
+ * (as it is specified as the maximum size in the SCLP documentation)
* because of the additional data structure described above.
*/
#define MAX_SCCB_ROOM (PAGE_SIZE - sizeof(struct sclp_buffer))
if (!atomic_read(&queue->set_pci_flags_count)){
/*
* there's no outstanding PCI any more, so we
- * have to request a PCI to be sure the the PCI
+ * have to request a PCI to be sure that the PCI
* will wake at some time in the future then we
* can flush packed buffers that might still be
* hanging around, which can happen if no
* Since we have been using this adapter, it is save to assume
* that it is not failed but recoverable. The card seems to
* report link-up events by self-initiated queue shutdown.
- * That is why we need to clear the the link-down flag
+ * That is why we need to clear the link-down flag
* which is set again in case we have missed by a mile.
*/
zfcp_erp_adapter_reopen(
| AHD_BUSFREEREV_BUG;
ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG;
- /* If the user requested the the SLOWCRC bit to be set. */
+ /* If the user requested that the SLOWCRC bit to be set. */
if (aic79xx_slowcrc)
ahd->features |= AHD_AIC79XXB_SLOWCRC;
#
# This file is licensed under GPLv2.
#
-# This file is part of the the aic94xx driver.
+# This file is part of the aic94xx driver.
#
# The aic94xx driver is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
/*
- * Safe settings. If set to zero the the BIOS/default values with
+ * Safe settings. If set to zero the BIOS/default values with
* command line overrides will be used. If set to 1 then safe and
* slow settings will be used.
*/
/*
* Mapping from the eeprom delay index value (index into this array)
- * to the the number of actual seconds that the delay should be for.
+ * to the number of actual seconds that the delay should be for.
*/
static char __devinitdata eeprom_index_to_delay_map[] =
{ 1, 3, 5, 10, 16, 30, 60, 120 };
* @io_port: base I/O address
* @addr: offset into SEEPROM
*
- * Returns the the byte read.
+ * Returns the byte read.
**/
static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr)
{
* @retries: number of times to retry request
* @flags: or into request flags;
*
- * returns the req->errors value which is the the scsi_cmnd result
+ * returns the req->errors value which is the scsi_cmnd result
* field.
**/
int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
}
-/* remove a service from the the device
+/* remove a service from the device
scp->id must be set! */
static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp)
{
/* Drivers that reuse some of the standard USB CDC infrastructure
- * (notably, using multiple interfaces according to the the CDC
+ * (notably, using multiple interfaces according to the CDC
* union descriptor) get some helper code.
*/
struct cdc_state {
* @info: pointer to device specific info structure
*
* DESCRIPTION:
- * Sets the the user monitor's horizontal and vertical
+ * Sets the user monitor's horizontal and vertical
* frequency limits
*/
static void __devinit i810_init_monspecs(struct fb_info *info)
* of it.
*
* First the roles of struct fb_info and struct display have changed. Struct
- * display will go away. The way the the new framebuffer console code will
+ * display will go away. The way the new framebuffer console code will
* work is that it will act to translate data about the tty/console in
* struct vc_data to data in a device independent way in struct fb_info. Then
* various functions in struct fb_ops will be called to store the device
if (l2nb < budmin) {
/* search the lower level dmap control pages to get
- * the starting block number of the the dmap that
+ * the starting block number of the dmap that
* contains or starts off the free space.
*/
if ((rc =
return -EIO;
}
- /* locate the the disk inode requested */
+ /* locate the disk inode requested */
dp = (struct dinode *) mp->data;
dp += rel_inode;
inum = pip->i_ino + 1;
ino = inum & (INOSPERIAG - 1);
- /* back off the the hint if it is outside of the iag */
+ /* back off the hint if it is outside of the iag */
if (ino == 0)
inum = pip->i_ino;
/*
* NAME: lbmRedrive
*
- * FUNCTION: add a log buffer to the the log redrive list
+ * FUNCTION: add a log buffer to the log redrive list
*
* PARAMETER:
* bp - log buffer
xfs_buf_relse(agbp);
agbp = NULL;
/*
- * Move up the the last inode in the current
+ * Move up the last inode in the current
* chunk. The lookup_ge will always get
* us the first inode in the next chunk.
*/
*
* The dmabounce routines call this function whenever a dma-mapping
* is requested to determine whether a given buffer needs to be bounced
- * or not. The function must return 0 if the the buffer is OK for
+ * or not. The function must return 0 if the buffer is OK for
* DMA access and 1 if the buffer needs to be bounced.
*
*/
* eeh_slot_error_detail -- record and EEH error condition to the log
* @severity: 1 if temporary, 2 if permanent failure.
*
- * Obtains the the EEH error details from the RTAS subsystem,
+ * Obtains the EEH error details from the RTAS subsystem,
* and then logs these details with the RTAS error log system.
*/
void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
/*
* Was i_next_alloc_goal in ext3_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it the physical block number of the block which was most-recentl
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
/*
* Was i_next_alloc_goal in ext4_inode_info
* is the *physical* companion to i_next_alloc_block.
- * it the the physical block number of the block which was most-recentl
+ * it the physical block number of the block which was most-recentl
* allocated to this file. This give us the goal (target) for the next
* allocation when we detect linearly ascending requests.
*/
* management of their lifetimes must be completely managed by API users.
*
* For API usage, in general,
- * - any function _modifying_ the the tree or tags (inserting or deleting
+ * - any function _modifying_ the tree or tags (inserting or deleting
* items, setting or clearing tags must exclude other modifications, and
* exclude any functions reading the tree.
- * - any function _reading_ the the tree or tags (looking up items or tags,
+ * - any function _reading_ the tree or tags (looking up items or tags,
* gang lookups) must exclude modifications to the tree, but may occur
* concurrently with other readers.
*
* @dir contains the inode structure of parent of the new file.
* @dentry contains the dentry structure of the new file.
* @mode contains the mode of the new file.
- * @dev contains the the device number.
+ * @dev contains the device number.
* Return 0 if permission is granted.
* @inode_rename:
* Check for permission to rename a file or directory.
* Each interface may have alternate settings. The initial configuration
* of a device sets altsetting 0, but the device driver can change
* that setting using usb_set_interface(). Alternate settings are often
- * used to control the the use of periodic endpoints, such as by having
+ * used to control the use of periodic endpoints, such as by having
* different endpoints use different amounts of reserved USB bandwidth.
* All standards-conformant USB devices that use isochronous endpoints
* will use them in non-default settings.
/**
* wakeup_readers - wake up readers waiting on a channel
- * @work: work struct that contains the the channel buffer
+ * @work: work struct that contains the channel buffer
*
* This is the work function used to defer reader waking. The
* reason waking is deferred is that calling directly from write
* The spin_unlock() itself is semi-permeable and only protects
* one way (it only protects stuff inside the critical region and
* stops them from bleeding out - it would still allow subsequent
- * loads to move into the the critical region).
+ * loads to move into the critical region).
*/
void fastcall
prepare_to_wait(wait_queue_head_t *q, wait_queue_t *wait, int state)
/*
* Split a vma into two pieces at address 'addr', a new vma is allocated
- * either for the first part or the the tail.
+ * either for the first part or the tail.
*/
int split_vma(struct mm_struct * mm, struct vm_area_struct * vma,
unsigned long addr, int new_below)
}
/*
- * The DECnet spec requires the the "routing layer" accepts packets which
+ * The DECnet spec requires that the "routing layer" accepts packets which
* are at least 230 bytes in size. This excludes any headers which the NSP
* layer might add, so we always assume that we'll be using the maximal
* length header on data packets. The variation in length is due to the
* @domain: the domain to add
*
* Description:
- * Adds the @domain to the the DOI specified by @doi_def, this function
+ * Adds the @domain to the DOI specified by @doi_def, this function
* should only be called by external functions (i.e. NetLabel). This function
* does allocate memory. Returns zero on success, negative values on failure.
*
* The SED algorithm attempts to minimize each job's expected delay until
* completion. The expected delay that the job will experience is
* (Ci + 1) / Ui if sent to the ith server, in which Ci is the number of
- * jobs on the the ith server and Ui is the fixed service rate (weight) of
+ * jobs on the ith server and Ui is the fixed service rate (weight) of
* the ith server. The SED algorithm adopts a greedy policy that each does
* what is in its own best interest, i.e. to join the queue which would
* minimize its expected delay of completion.
}
/* return:
- * 1 if the the UDP system should process it
+ * 1 if the UDP system should process it
* 0 if we should drop this packet
* -1 if it should get processed by xfrm4_rcv_encap
*/
memset(&laddr, 0, sizeof(laddr));
memset(&daddr, 0, sizeof(daddr));
/*
- * FIXME: check if the the address is multicast,
+ * FIXME: check if the address is multicast,
* only SOCK_DGRAM can do this.
*/
memcpy(laddr.mac, addr->sllc_mac, IFHWADDRLEN);
struct nf_conntrack_expect *i;
write_lock_bh(&nf_conntrack_lock);
- /* choose the the oldest expectation to evict */
+ /* choose the oldest expectation to evict */
list_for_each_entry_reverse(i, &nf_conntrack_expect_list, list) {
if (expect_matches(i, exp) && del_timer(&i->timeout)) {
nf_ct_unlink_expect(i);
*
* This file is part of the SCTP kernel reference Implementation
*
- * This file contains the code relating the the chunk abstraction.
+ * This file contains the code relating the chunk abstraction.
*
* The SCTP reference implementation is free software;
* you can redistribute it and/or modify it under the terms of
*
* 7.1.2 SCTP_ASSOCINFO
*
- * This option is used to tune the the maximum retransmission attempts
+ * This option is used to tune the maximum retransmission attempts
* of the association.
* Returns an error if the new association retransmission value is
* greater than the sum of the retransmission value of the peer.
*
* 7.1.2 SCTP_ASSOCINFO
*
- * This option is used to tune the the maximum retransmission attempts
+ * This option is used to tune the maximum retransmission attempts
* of the association.
* Returns an error if the new association retransmission value is
* greater than the sum of the retransmission value of the peer.
}
/* A request, which was authenticated, has now executed.
- * Time to finalise the the credentials and verifier
+ * Time to finalise the credentials and verifier
* and release and resources
*/
int svc_authorise(struct svc_rqst *rqstp)
* Document all external or internal functions in a file.
* Call kernel-doc with following parameters:
* kernel-doc -docbook -nofunction function_name1 filename
- * function names are obtained from all the the src files
+ * function names are obtained from all the src files
* by find_export_symbols.
* intfunc uses -nofunction
* extfunc uses -function
unsigned short val;
snd_ac97_write(ac97, reg, 0x8080 | cbit[i] | (cbit[i] << 8));
/* Do the read twice due to buffers on some ac97 codecs.
- * e.g. The STAC9704 returns exactly what you wrote the the register
+ * e.g. The STAC9704 returns exactly what you wrote to the register
* if you read it immediately. This causes the detect routine to fail.
*/
val = snd_ac97_read(ac97, reg);
projects / linux-drm-fsl-dcu.git / commitdiff