Simon Kelley <simon@thekelleys.org.uk>
Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
Stephen Hemminger <shemminger@osdl.org>
+Sudeep Holla <sudeep.holla@arm.com> Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Sumit Semwal <sumit.semwal@ti.com>
Tejun Heo <htejun@gmail.com>
Thomas Graf <tgraf@suug.ch>
Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
-Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
+Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Yusuke Goda <goda.yusuke@renesas.com>
Gustavo Padovan <gustavo@las.ic.unicamp.br>
object is near the sensor, usually be observing
reflectivity of infrared or ultrasound emitted.
Often these sensors are unit less and as such conversion
- to SI units is not possible. Where it is, the units should
- be meters. If such a conversion is not possible, the reported
- values should behave in the same way as a distance, i.e. lower
- values indicate something is closer to the sensor.
+ to SI units is not possible. Higher proximity measurements
+ indicate closer objects, and vice versa.
What: /sys/.../iio:deviceX/in_illuminance_input
What: /sys/.../iio:deviceX/in_illuminance_raw
<td valign="top" >TBD</td>
</tr>
<tr>
- <td rowspan="2" valign="top" >omap</td>
+ <td valign="top" >omap</td>
<td valign="top" >Generic</td>
<td valign="top" >“zorder”</td>
<td valign="top" >RANGE</td>
Document Author
---------------
- Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
+ Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics
+ User Manual
http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
- - Allwinner A23
+ - Allwinner A23 (sun8i)
+ Datasheet
http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf
+ User Manual
+ User Manual
http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf
+ - Allwinner A33 (sun8i)
+ + Datasheet
+ http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf
+ + User Manual
+ http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
+
+ - Allwinner H3 (sun8i)
+ + Datasheet
+ http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
+
* Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
- Allwinner A80
+ Datasheet
http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf
+
+ * Octa ARM Cortex-A7 based SoCs
+ - Allwinner A83T
+ + Not Supported
+ + Datasheet
+ http://dl.linux-sunxi.org/A83T/A83T_datasheet_Revision_1.1.pdf
no further I/O will be permitted and the status will just
contain the string 'Fail'. The userspace recovery tools
should then be used.
+needs_check : 'needs_check' if set, '-' if not set
+ A metadata operation has failed, resulting in the needs_check
+ flag being set in the metadata's superblock. The metadata
+ device must be deactivated and checked/repaired before the
+ cache can be made fully operational again. '-' indicates
+ needs_check is not set.
Messages
--------
underlying device. When this is enabled when loading the table,
it can get disabled if the underlying device doesn't support it.
- ro|rw
+ ro|rw|out_of_data_space
If the pool encounters certain types of device failures it will
drop into a read-only metadata mode in which no changes to
the pool metadata (like allocating new blocks) are permitted.
module parameter can be used to change this timeout -- it
defaults to 60 seconds but may be disabled using a value of 0.
+ needs_check
+ A metadata operation has failed, resulting in the needs_check
+ flag being set in the metadata's superblock. The metadata
+ device must be deactivated and checked/repaired before the
+ thin-pool can be made fully operational again. '-' indicates
+ needs_check is not set.
+
iii) Messages
create_thin <dev id>
allwinner,sun6i-a31
allwinner,sun7i-a20
allwinner,sun8i-a23
+ allwinner,sun8i-a33
+ allwinner,sun8i-h3
allwinner,sun9i-a80
- edid: verbatim EDID data block describing attached display.
- ddc: phandle describing the i2c bus handling the display data
channel
-- port: A port node with endpoint definitions as defined in
+- port@[0-1]: Port nodes with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Port 0 is the input port connected to the IPU display interface,
+ port 1 is the output port connected to a panel.
example:
edid = [edid-data];
interface-pix-fmt = "rgb24";
- port {
+ port@0 {
+ reg = <0>;
+
display_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+panel {
+ ...
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
};
Required properties:
- compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
is the IP revision of the specific EMIF instance.
+ For am437x should be ti,emif-am4372.
- phy-type : <u32> indicating the DDR phy type. Following are the
allowed values
$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
mode) if this option is supported by $(AR).
+ ARCH_CPPFLAGS, ARCH_AFLAGS, ARCH_CFLAGS Overrides the kbuild defaults
+
+ These variables are appended to the KBUILD_CPPFLAGS,
+ KBUILD_AFLAGS, and KBUILD_CFLAGS, respectively, after the
+ top-level Makefile has set any other flags. This provides a
+ means for an architecture to override the defaults.
+
+
--- 6.2 Add prerequisites to archheaders:
The archheaders: rule is used to generate header files that
Q: Can I suspend-to-disk using a swap partition under LVM?
-A: No. You can suspend successfully, but you'll not be able to
-resume. uswsusp should be able to work with LVM. See suspend.sf.net.
+A: Yes and No. You can suspend successfully, but the kernel will not be able
+to resume on its own. You need an initramfs that can recognize the resume
+situation, activate the logical volume containing the swap volume (but not
+touch any filesystems!), and eventually call
+
+echo -n "$major:$minor" > /sys/power/resume
+
+where $major and $minor are the respective major and minor device numbers of
+the swap volume.
+
+uswsusp works with LVM, too. See http://suspend.sourceforge.net/
Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
compiled with the similar configuration files. Anyway I found that
F: drivers/input/touchscreen/ad7879.c
ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
-M: Jiri Kosina <jkosina@suse.cz>
+M: Jiri Kosina <jkosina@suse.com>
S: Maintained
ADM1025 HARDWARE MONITOR DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/adm1025
F: drivers/macintosh/therm_adt746x.c
ADT7475 HARDWARE MONITOR DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/adt7475
ADVANSYS SCSI DRIVER
M: Matthew Wilcox <matthew@wil.cx>
-M: Hannes Reinecke <hare@suse.de>
+M: Hannes Reinecke <hare@suse.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: Documentation/scsi/advansys.txt
F: drivers/scsi/pcmcia/aha152x*
AIC7XXX / AIC79XX SCSI DRIVER
-M: Hannes Reinecke <hare@suse.de>
+M: Hannes Reinecke <hare@suse.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/aic7xxx/
F: sound/aoa/
APM DRIVER
-M: Jiri Kosina <jkosina@suse.cz>
+M: Jiri Kosina <jkosina@suse.com>
S: Odd fixes
F: arch/x86/kernel/apm_32.c
F: include/linux/apm_bios.h
M: Baruch Siach <baruch@tkos.co.il>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+F: arch/arm/boot/dts/cx92755*
N: digicolor
ARM/EBSA110 MACHINE SUPPORT
F: arch/arm/mach-pxa/palmtc.c
ARM/PALM TREO SUPPORT
-M: Tomas Cech <sleep_walker@suse.cz>
+M: Tomas Cech <sleep_walker@suse.com>
L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/vexpress*
+F: arch/arm64/boot/dts/arm/vexpress*
F: arch/arm/mach-vexpress/
F: */*/vexpress*
F: */*/*/vexpress*
BTRFS FILE SYSTEM
M: Chris Mason <clm@fb.com>
M: Josef Bacik <jbacik@fb.com>
-M: David Sterba <dsterba@suse.cz>
+M: David Sterba <dsterba@suse.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
F: arch/powerpc/oprofile/*cell*
F: arch/powerpc/platforms/cell/
-CEPH DISTRIBUTED FILE SYSTEM CLIENT
+CEPH COMMON CODE (LIBCEPH)
+M: Ilya Dryomov <idryomov@gmail.com>
M: "Yan, Zheng" <zyan@redhat.com>
M: Sage Weil <sage@redhat.com>
L: ceph-devel@vger.kernel.org
W: http://ceph.com/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T: git git://github.com/ceph/ceph-client.git
S: Supported
-F: Documentation/filesystems/ceph.txt
-F: fs/ceph/
F: net/ceph/
F: include/linux/ceph/
F: include/linux/crush/
+CEPH DISTRIBUTED FILE SYSTEM CLIENT (CEPH)
+M: "Yan, Zheng" <zyan@redhat.com>
+M: Sage Weil <sage@redhat.com>
+M: Ilya Dryomov <idryomov@gmail.com>
+L: ceph-devel@vger.kernel.org
+W: http://ceph.com/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T: git git://github.com/ceph/ceph-client.git
+S: Supported
+F: Documentation/filesystems/ceph.txt
+F: fs/ceph/
+
CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
L: linux-usb@vger.kernel.org
S: Orphan
M: Julia Lawall <Julia.Lawall@lip6.fr>
M: Gilles Muller <Gilles.Muller@lip6.fr>
M: Nicolas Palix <nicolas.palix@imag.fr>
-M: Michal Marek <mmarek@suse.cz>
+M: Michal Marek <mmarek@suse.com>
L: cocci@systeme.lip6.fr (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
W: http://coccinelle.lip6.fr/
CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
M: Johannes Weiner <hannes@cmpxchg.org>
-M: Michal Hocko <mhocko@suse.cz>
+M: Michal Hocko <mhocko@kernel.org>
L: cgroups@vger.kernel.org
L: linux-mm@kvack.org
S: Maintained
F: arch/x86/kernel/msr.c
CPU POWER MONITORING SUBSYSTEM
-M: Thomas Renninger <trenn@suse.de>
+M: Thomas Renninger <trenn@suse.com>
L: linux-pm@vger.kernel.org
S: Maintained
F: tools/power/cpupower/
F: drivers/net/ethernet/dec/tulip/dmfe.c
DC390/AM53C974 SCSI driver
-M: Hannes Reinecke <hare@suse.de>
+M: Hannes Reinecke <hare@suse.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/am53c974.c
S: Maintained
DISKQUOTA
-M: Jan Kara <jack@suse.cz>
+M: Jan Kara <jack@suse.com>
S: Maintained
F: Documentation/filesystems/quota.txt
F: fs/quota/
F: drivers/hwmon/dme1737.c
DMI/SMBIOS SUPPORT
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
S: Maintained
T: quilt http://jdelvare.nerim.net/devel/linux/jdelvare-dmi/
F: Documentation/ABI/testing/sysfs-firmware-dmi-tables
F: drivers/of/of_net.c
EXT2 FILE SYSTEM
-M: Jan Kara <jack@suse.cz>
+M: Jan Kara <jack@suse.com>
L: linux-ext4@vger.kernel.org
S: Maintained
F: Documentation/filesystems/ext2.txt
F: include/linux/ext2*
EXT3 FILE SYSTEM
-M: Jan Kara <jack@suse.cz>
+M: Jan Kara <jack@suse.com>
M: Andrew Morton <akpm@linux-foundation.org>
M: Andreas Dilger <adilger.kernel@dilger.ca>
L: linux-ext4@vger.kernel.org
F: include/video/exynos_mipi*
F71805F HARDWARE MONITORING DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/f71805f
F: drivers/block/rsxx/
FLOPPY DRIVER
-M: Jiri Kosina <jkosina@suse.cz>
+M: Jiri Kosina <jkosina@suse.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
S: Odd fixes
F: drivers/block/floppy.c
H8/300 ARCHITECTURE
M: Yoshinori Sato <ysato@users.sourceforge.jp>
-L: uclinux-h8-devel@lists.sourceforge.jp
+L: uclinux-h8-devel@lists.sourceforge.jp (moderated for non-subscribers)
W: http://uclinux-h8.sourceforge.jp
T: git git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git
S: Maintained
F: drivers/media/usb/hackrf/
HARDWARE MONITORING
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
F: arch/*/include/asm/suspend*.h
HID CORE LAYER
-M: Jiri Kosina <jkosina@suse.cz>
+M: Jiri Kosina <jkosina@suse.com>
L: linux-input@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
F: include/uapi/linux/hid*
HID SENSOR HUB DRIVERS
-M: Jiri Kosina <jkosina@suse.cz>
+M: Jiri Kosina <jkosina@suse.com>
M: Jonathan Cameron <jic23@kernel.org>
M: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
L: linux-input@vger.kernel.org
F: tools/hv/
I2C OVER PARALLEL PORT
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-parport
F: drivers/i2c/busses/i2c-parport-light.c
I2C/SMBUS CONTROLLER DRIVERS FOR PC
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-ali1535
F: Documentation/i2c/busses/i2c-ismt
I2C/SMBUS STUB DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/i2c-stub.c
S: Maintained
I2C-TAOS-EVM DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-taos-evm
F: net/netfilter/ipvs/
IPWIRELESS DRIVER
-M: Jiri Kosina <jkosina@suse.cz>
-M: David Sterba <dsterba@suse.cz>
+M: Jiri Kosina <jkosina@suse.com>
+M: David Sterba <dsterba@suse.com>
S: Odd Fixes
F: drivers/tty/ipwireless/
F: drivers/isdn/hardware/eicon/
IT87 HARDWARE MONITORING DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/it87
JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
M: Andrew Morton <akpm@linux-foundation.org>
-M: Jan Kara <jack@suse.cz>
+M: Jan Kara <jack@suse.com>
L: linux-ext4@vger.kernel.org
S: Maintained
F: fs/jbd/
F: fs/autofs4/
KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
-M: Michal Marek <mmarek@suse.cz>
+M: Michal Marek <mmarek@suse.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git for-next
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git rc-fixes
L: linux-kbuild@vger.kernel.org
F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
-M: Alexander Graf <agraf@suse.de>
+M: Alexander Graf <agraf@suse.com>
L: kvm-ppc@vger.kernel.org
W: http://kvm.qumranet.com
T: git git://github.com/agraf/linux-2.6.git
F: include/linux/leds.h
LEGACY EEPROM DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
S: Maintained
F: Documentation/misc-devices/eeprom
F: drivers/misc/eeprom/eeprom.c
F: include/linux/libata.h
LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
-M: Viresh Kumar <viresh.linux@gmail.com>
+M: Viresh Kumar <vireshk@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
Q: https://patchwork.kernel.org/project/linux-nvdimm/list/
S: Supported
F: drivers/nvdimm/pmem.c
+F: include/linux/pmem.h
LINUX FOR IBM pSERIES (RS/6000)
M: Paul Mackerras <paulus@au.ibm.com>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org
Q: http://patchwork.ozlabs.org/project/linuxppc-dev/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git
S: Supported
F: Documentation/powerpc/
F: arch/powerpc/
LIVE PATCHING
M: Josh Poimboeuf <jpoimboe@redhat.com>
M: Seth Jennings <sjenning@redhat.com>
-M: Jiri Kosina <jkosina@suse.cz>
-M: Vojtech Pavlik <vojtech@suse.cz>
+M: Jiri Kosina <jkosina@suse.com>
+M: Vojtech Pavlik <vojtech@suse.com>
S: Maintained
F: kernel/livepatch/
F: include/linux/livepatch.h
F: drivers/hwmon/lm73.c
LM78 HARDWARE MONITOR DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/lm78
F: drivers/hwmon/lm78.c
LM83 HARDWARE MONITOR DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/lm83
F: drivers/hwmon/lm83.c
LM90 HARDWARE MONITOR DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/lm90
F: net/*/netfilter.c
F: net/*/netfilter/
F: net/netfilter/
+F: net/bridge/br_netfilter*.c
NETLABEL
M: Paul Moore <paul@paul-moore.com>
F: drivers/char/pc8736x_gpio.c
PC87427 HARDWARE MONITORING DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/pc87427
F: drivers/pinctrl/samsung/
PIN CONTROLLER - ST SPEAR
-M: Viresh Kumar <viresh.linux@gmail.com>
+M: Viresh Kumar <vireshk@kernel.org>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
F: drivers/pinctrl/spear/
PKTCDVD DRIVER
-M: Jiri Kosina <jkosina@suse.cz>
+M: Jiri Kosina <jkosina@suse.com>
S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h
M: Ilya Dryomov <idryomov@gmail.com>
M: Sage Weil <sage@redhat.com>
M: Alex Elder <elder@kernel.org>
-M: ceph-devel@vger.kernel.org
+L: ceph-devel@vger.kernel.org
W: http://ceph.com/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+T: git git://github.com/ceph/ceph-client.git
S: Supported
+F: Documentation/ABI/testing/sysfs-bus-rbd
F: drivers/block/rbd.c
F: drivers/block/rbd_types.h
F: drivers/tty/serial/
SYNOPSYS DESIGNWARE DMAC DRIVER
-M: Viresh Kumar <viresh.linux@gmail.com>
+M: Viresh Kumar <vireshk@kernel.org>
M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
S: Maintained
F: include/linux/dma/dw.h
F: drivers/mmc/host/sdhci-s3c*
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
-M: Viresh Kumar <viresh.linux@gmail.com>
+M: Viresh Kumar <vireshk@kernel.org>
L: spear-devel@list.st.com
L: linux-mmc@vger.kernel.org
S: Maintained
F: drivers/hwmon/sch5627.c
SMSC47B397 HARDWARE MONITOR DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/smsc47b397
F: drivers/media/pci/solo6x10/
SOFTWARE RAID (Multiple Disks) SUPPORT
-M: Neil Brown <neilb@suse.de>
+M: Neil Brown <neilb@suse.com>
L: linux-raid@vger.kernel.org
S: Supported
F: drivers/md/
SOUND
M: Jaroslav Kysela <perex@perex.cz>
-M: Takashi Iwai <tiwai@suse.de>
+M: Takashi Iwai <tiwai@suse.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://www.alsa-project.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
F: include/linux/compiler.h
SPEAR PLATFORM SUPPORT
-M: Viresh Kumar <viresh.linux@gmail.com>
+M: Viresh Kumar <vireshk@kernel.org>
M: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/mach-spear/
SPEAR CLOCK FRAMEWORK SUPPORT
-M: Viresh Kumar <viresh.linux@gmail.com>
+M: Viresh Kumar <vireshk@kernel.org>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
TTY LAYER
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-M: Jiri Slaby <jslaby@suse.cz>
+M: Jiri Slaby <jslaby@suse.com>
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
F: Documentation/serial/
F: arch/m68k/include/asm/*_no.*
UDF FILESYSTEM
-M: Jan Kara <jack@suse.cz>
+M: Jan Kara <jack@suse.com>
S: Maintained
F: Documentation/filesystems/udf.txt
F: fs/udf/
F: include/linux/usb/gadget*
USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
-M: Jiri Kosina <jkosina@suse.cz>
+M: Jiri Kosina <jkosina@suse.com>
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
F: drivers/usb/host/uhci*
USB "USBNET" DRIVER FRAMEWORK
-M: Oliver Neukum <oneukum@suse.de>
+M: Oliver Neukum <oneukum@suse.com>
L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
F: drivers/hwmon/w83793.c
W83795 HARDWARE MONITORING DRIVER
-M: Jean Delvare <jdelvare@suse.de>
+M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/w83795.c
VERSION = 4
PATCHLEVEL = 2
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
include scripts/Makefile.kasan
include scripts/Makefile.extrawarn
-# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
-KBUILD_CPPFLAGS += $(KCPPFLAGS)
-KBUILD_AFLAGS += $(KAFLAGS)
-KBUILD_CFLAGS += $(KCFLAGS)
+# Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the
+# last assignments
+KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS)
+KBUILD_AFLAGS += $(ARCH_AFLAGS) $(KAFLAGS)
+KBUILD_CFLAGS += $(ARCH_CFLAGS) $(KCFLAGS)
# Use --build-id when available.
LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
config ARCH_THREAD_INFO_ALLOCATOR
bool
+# Select if arch wants to size task_struct dynamically via arch_task_struct_size:
+config ARCH_WANTS_DYNAMIC_TASK_STRUCT
+ bool
+
config HAVE_REGS_AND_STACK_ACCESS_API
bool
help
generic-y += exec.h
generic-y += irq_work.h
generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += sections.h
generic-y += trace_clock.h
+++ /dev/null
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ALPHA_MM_ARCH_HOOKS_H
-#define _ASM_ALPHA_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ALPHA_MM_ARCH_HOOKS_H */
config ARC_CPU_750D
bool "ARC750D"
+ select ARC_CANT_LLSC
help
Support for ARC750 core
config ARC_HAS_LLSC
bool "Insn: LLOCK/SCOND (efficient atomic ops)"
default y
- depends on !ARC_CPU_750D && !ARC_CANT_LLSC
+ depends on !ARC_CANT_LLSC
config ARC_HAS_SWAPE
bool "Insn: SWAPE (endian-swap)"
ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
# Generic build system uses -O2, we want -O3
-cflags-y += -O3
+# Note: No need to add to cflags-y as that happens anyways
+ARCH_CFLAGS += -O3
endif
# small data is default for elf32 tool-chain. If not usable, disable it
/ {
compatible = "snps,arc";
- clock-frequency = <75000000>;
+ clock-frequency = <90000000>;
#address-cells = <1>;
#size-cells = <1>;
/ {
compatible = "snps,arc";
- clock-frequency = <75000000>;
+ clock-frequency = <90000000>;
#address-cells = <1>;
#size-cells = <1>;
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
+generic-y += mm-arch-hooks.h
generic-y += mman.h
generic-y += msgbuf.h
generic-y += param.h
* done for const @nr, but no code is generated due to gcc \
* const prop. \
*/ \
- if (__builtin_constant_p(nr)) \
- nr &= 0x1f; \
+ nr &= 0x1f; \
\
__asm__ __volatile__( \
"1: llock %0, [%1] \n" \
\
m += nr >> 5; \
\
- if (__builtin_constant_p(nr)) \
- nr &= 0x1f; \
+ nr &= 0x1f; \
\
/* \
* Explicit full memory barrier needed before/after as \
unsigned long temp, flags; \
m += nr >> 5; \
\
- if (__builtin_constant_p(nr)) \
- nr &= 0x1f; \
- \
/* \
* spin lock/unlock provide the needed smp_mb() before/after \
*/ \
bitops_lock(flags); \
\
temp = *m; \
- *m = temp c_op (1UL << nr); \
+ *m = temp c_op (1UL << (nr & 0x1f)); \
\
bitops_unlock(flags); \
}
unsigned long old, flags; \
m += nr >> 5; \
\
- if (__builtin_constant_p(nr)) \
- nr &= 0x1f; \
- \
bitops_lock(flags); \
\
old = *m; \
- *m = old c_op (1 << nr); \
+ *m = old c_op (1UL << (nr & 0x1f)); \
\
bitops_unlock(flags); \
\
- return (old & (1 << nr)) != 0; \
+ return (old & (1UL << (nr & 0x1f))) != 0; \
}
#endif /* CONFIG_ARC_HAS_LLSC */
unsigned long temp; \
m += nr >> 5; \
\
- if (__builtin_constant_p(nr)) \
- nr &= 0x1f; \
- \
temp = *m; \
- *m = temp c_op (1UL << nr); \
+ *m = temp c_op (1UL << (nr & 0x1f)); \
}
#define __TEST_N_BIT_OP(op, c_op, asm_op) \
unsigned long old; \
m += nr >> 5; \
\
- if (__builtin_constant_p(nr)) \
- nr &= 0x1f; \
- \
old = *m; \
- *m = old c_op (1 << nr); \
+ *m = old c_op (1UL << (nr & 0x1f)); \
\
- return (old & (1 << nr)) != 0; \
+ return (old & (1UL << (nr & 0x1f))) != 0; \
}
#define BIT_OPS(op, c_op, asm_op) \
addr += nr >> 5;
- if (__builtin_constant_p(nr))
- nr &= 0x1f;
-
- mask = 1 << nr;
+ mask = 1UL << (nr & 0x1f);
return ((mask & *addr) != 0);
}
#include <linux/uaccess.h>
#include <asm/errno.h>
+#ifdef CONFIG_ARC_HAS_LLSC
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
+ \
+ __asm__ __volatile__( \
+ "1: llock %1, [%2] \n" \
+ insn "\n" \
+ "2: scond %0, [%2] \n" \
+ " bnz 1b \n" \
+ " mov %0, 0 \n" \
+ "3: \n" \
+ " .section .fixup,\"ax\" \n" \
+ " .align 4 \n" \
+ "4: mov %0, %4 \n" \
+ " b 3b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " .align 4 \n" \
+ " .word 1b, 4b \n" \
+ " .word 2b, 4b \n" \
+ " .previous \n" \
+ \
+ : "=&r" (ret), "=&r" (oldval) \
+ : "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \
+ : "cc", "memory")
+
+#else /* !CONFIG_ARC_HAS_LLSC */
+
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
\
__asm__ __volatile__( \
- "1: ld %1, [%2] \n" \
+ "1: ld %1, [%2] \n" \
insn "\n" \
- "2: st %0, [%2] \n" \
+ "2: st %0, [%2] \n" \
" mov %0, 0 \n" \
"3: \n" \
" .section .fixup,\"ax\" \n" \
: "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \
: "cc", "memory")
+#endif
+
static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
{
int op = (encoded_op >> 28) & 7;
pagefault_disable();
- /* TBD : can use llock/scond */
__asm__ __volatile__(
- "1: ld %0, [%3] \n"
- " brne %0, %1, 3f \n"
- "2: st %2, [%3] \n"
+#ifdef CONFIG_ARC_HAS_LLSC
+ "1: llock %0, [%3] \n"
+ " brne %0, %1, 3f \n"
+ "2: scond %2, [%3] \n"
+ " bnz 1b \n"
+#else
+ "1: ld %0, [%3] \n"
+ " brne %0, %1, 3f \n"
+ "2: st %2, [%3] \n"
+#endif
"3: \n"
" .section .fixup,\"ax\" \n"
"4: mov %0, %4 \n"
+++ /dev/null
-/*
- * Architecture specific mm hooks
- *
- * Copyright (C) 2015, IBM Corporation
- * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ARC_MM_ARCH_HOOKS_H
-#define _ASM_ARC_MM_ARCH_HOOKS_H
-
-#endif /* _ASM_ARC_MM_ARCH_HOOKS_H */
long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
};
-#define instruction_pointer(regs) ((regs)->ret)
+#define instruction_pointer(regs) (unsigned long)((regs)->ret)
#define profile_pc(regs) instruction_pointer(regs)
/* return 1 if user mode or 0 if kernel mode */
#include <linux/of.h>
#include <linux/irqdomain.h>
#include <linux/irqchip.h>
-#include "../../drivers/irqchip/irqchip.h"
#include <asm/irq.h>
/*
#include <linux/of.h>
#include <linux/irqdomain.h>
#include <linux/irqchip.h>
-#include "../../drivers/irqchip/irqchip.h"
#include <asm/irq.h>
/*
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_irq.h>
-#include "../../drivers/irqchip/irqchip.h"
/*
* Set the DEST for @cmn_irq to @cpu_mask (1 bit per core)
raw_spin_unlock_irqrestore(&mcip_lock, flags);
}
+#ifdef CONFIG_SMP
static int
-idu_irq_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool f)
+idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
+ bool force)
{
+ unsigned long flags;
+ cpumask_t online;
+
+ /* errout if no online cpu per @cpumask */
+ if (!cpumask_and(&online, cpumask, cpu_online_mask))
+ return -EINVAL;
+
+ raw_spin_lock_irqsave(&mcip_lock, flags);
+
+ idu_set_dest(data->hwirq, cpumask_bits(&online)[0]);
+ idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
+
+ raw_spin_unlock_irqrestore(&mcip_lock, flags);
+
return IRQ_SET_MASK_OK;
}
+#endif
static struct irq_chip idu_irq_chip = {
.name = "MCIP IDU Intc",
if (!i)
idu_first_irq = irq;
- irq_set_handler_data(irq, domain);
- irq_set_chained_handler(irq, idu_cascade_isr);
+ irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain);
}
__mcip_cmd(CMD_IDU_ENABLE, 0);
}
static const struct cpuinfo_data arc_cpu_tbl[] = {
+#ifdef CONFIG_ISA_ARCOMPACT
{ {0x20, "ARC 600" }, 0x2F},
{ {0x30, "ARC 700" }, 0x33},
{ {0x34, "ARC 700 R4.10"}, 0x34},
{ {0x35, "ARC 700 R4.11"}, 0x35},
- { {0x50, "ARC HS38" }, 0x51},
+#else
+ { {0x50, "ARC HS38 R2.0"}, 0x51},
+ { {0x52, "ARC HS38 R2.1"}, 0x52},
+#endif
{ {0x00, NULL } }
};
-#define IS_AVAIL1(v, str) ((v) ? str : "")
-#define IS_USED(cfg) (IS_ENABLED(cfg) ? "" : "(not used) ")
-#define IS_AVAIL2(v, str, cfg) IS_AVAIL1(v, str), IS_AVAIL1(v, IS_USED(cfg))
+#define IS_AVAIL1(v, s) ((v) ? s : "")
+#define IS_USED_RUN(v) ((v) ? "" : "(not used) ")
+#define IS_USED_CFG(cfg) IS_USED_RUN(IS_ENABLED(cfg))
+#define IS_AVAIL2(v, s, cfg) IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
{
n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
}
n += scnprintf(buf + n, len - n, "%s",
- IS_USED(CONFIG_ARC_HAS_HW_MPY));
+ IS_USED_CFG(CONFIG_ARC_HAS_HW_MPY));
}
n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
{
- struct path path;
char *path_nm = NULL;
struct mm_struct *mm;
struct file *exe_file;
noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
{
#ifdef CONFIG_ISA_ARCV2
+ /*
+ * SLC is shared between all cores and concurrent aux operations from
+ * multiple cores need to be serialized using a spinlock
+ * A concurrent operation can be silently ignored and/or the old/new
+ * operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop
+ * below)
+ */
+ static DEFINE_SPINLOCK(lock);
unsigned long flags;
unsigned int ctrl;
- local_irq_save(flags);
+ spin_lock_irqsave(&lock, flags);
/*
* The Region Flush operation is specified by CTRL.RGN_OP[11..9]
while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&lock, flags);
#endif
}
/* This is kernel Virtual address (0x7000_0000 based) */
kvaddr = ioremap_nocache((unsigned long)paddr, size);
- if (kvaddr != NULL)
- memset(kvaddr, 0, size);
+ if (kvaddr == NULL)
+ return NULL;
/* This is bus address, platform dependent */
*dma_handle = (dma_addr_t)paddr;
config HIGHPTE
bool "Allocate 2nd-level pagetables from highmem"
depends on HIGHMEM
+ help
+ The VM uses one page of physical memory for each page table.
+ For systems with a lot of processes, this can use a lot of
+ precious low memory, eventually leading to low memory being
+ consumed by page tables. Setting this option will allow
+ user-space 2nd level page tables to reside in high memory.
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
config DEBUG_SET_MODULE_RONX
bool "Set loadable kernel module data as NX and text as RO"
- depends on MODULES
+ depends on MODULES && MMU
---help---
This option helps catch unintended modifications to loadable
kernel module's text and read-only data. It also prevents execution
status = "okay";
};
};
+
+&rtc {
+ system-power-controller;
+};
audio_codec: tlv320aic3106@1b {
compatible = "ti,tlv320aic3106";
reg = <0x1b>;
+ ai3x-micbias-vg = <0x2>;
};
accel: lis331dlh@1d {
ti,audio-routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
- "LINE1L", "Line In";
+ "MIC3L", "Mic3L Switch";
};
&mcasp0 {
regulators {
dcdc1_reg: regulator@0 {
/* VDD_1V8 system supply */
+ regulator-always-on;
};
dcdc2_reg: regulator@1 {
/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <1325000>;
+ regulator-max-microvolt = <1150000>;
regulator-boot-on;
+ regulator-always-on;
};
dcdc3_reg: regulator@2 {
/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <1150000>;
+ regulator-max-microvolt = <1325000>;
regulator-boot-on;
+ regulator-always-on;
};
ldo1_reg: regulator@3 {
/* VRTC 1.8V always-on supply */
+ regulator-name = "vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
/* 3.3V rail */
+ regulator-name = "vdd_3v3aux";
+ regulator-always-on;
};
ldo3_reg: regulator@5 {
/* VDD_3V3A 3.3V rail */
+ regulator-name = "vdd_3v3a";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo4_reg: regulator@6 {
/* VDD_3V3B 3.3V rail */
+ regulator-name = "vdd_3v3b";
+ regulator-always-on;
};
};
};
};
};
+ emif: emif@4c000000 {
+ compatible = "ti,emif-am4372";
+ reg = <0x4c000000 0x1000000>;
+ ti,hwmods = "emif";
+ };
+
edma: edma@49000000 {
compatible = "ti,edma3";
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
ti,hwmods = "dss_rfbi";
clocks = <&disp_clk>;
clock-names = "fck";
+ status = "disabled";
};
};
phy-supply = <&ldousb_reg>;
};
+&usb2_phy2 {
+ phy-supply = <&ldousb_reg>;
+};
+
&usb1 {
dr_mode = "host";
pinctrl-names = "default";
compatible = "sirf,atlas7-ioc";
reg = <0x18880000 0x1000>,
<0x10E40000 0x1000>;
+
+ audio_ac97_pmx: audio_ac97@0 {
+ audio_ac97 {
+ groups = "audio_ac97_grp";
+ function = "audio_ac97";
+ };
+ };
+
+ audio_func_dbg_pmx: audio_func_dbg@0 {
+ audio_func_dbg {
+ groups = "audio_func_dbg_grp";
+ function = "audio_func_dbg";
+ };
+ };
+
+ audio_i2s_pmx: audio_i2s@0 {
+ audio_i2s {
+ groups = "audio_i2s_grp";
+ function = "audio_i2s";
+ };
+ };
+
+ audio_i2s_2ch_pmx: audio_i2s_2ch@0 {
+ audio_i2s_2ch {
+ groups = "audio_i2s_2ch_grp";
+ function = "audio_i2s_2ch";
+ };
+ };
+
+ audio_i2s_extclk_pmx: audio_i2s_extclk@0 {
+ audio_i2s_extclk {
+ groups = "audio_i2s_extclk_grp";
+ function = "audio_i2s_extclk";
+ };
+ };
+
+ audio_uart0_pmx: audio_uart0@0 {
+ audio_uart0 {
+ groups = "audio_uart0_grp";
+ function = "audio_uart0";
+ };
+ };
+
+ audio_uart1_pmx: audio_uart1@0 {
+ audio_uart1 {
+ groups = "audio_uart1_grp";
+ function = "audio_uart1";
+ };
+ };
+
+ audio_uart2_pmx0: audio_uart2@0 {
+ audio_uart2_0 {
+ groups = "audio_uart2_grp0";
+ function = "audio_uart2_m0";
+ };
+ };
+
+ audio_uart2_pmx1: audio_uart2@1 {
+ audio_uart2_1 {
+ groups = "audio_uart2_grp1";
+ function = "audio_uart2_m1";
+ };
+ };
+
+ c_can_trnsvr_pmx: c_can_trnsvr@0 {
+ c_can_trnsvr {
+ groups = "c_can_trnsvr_grp";
+ function = "c_can_trnsvr";
+ };
+ };
+
+ c0_can_pmx0: c0_can@0 {
+ c0_can_0 {
+ groups = "c0_can_grp0";
+ function = "c0_can_m0";
+ };
+ };
+
+ c0_can_pmx1: c0_can@1 {
+ c0_can_1 {
+ groups = "c0_can_grp1";
+ function = "c0_can_m1";
+ };
+ };
+
+ c1_can_pmx0: c1_can@0 {
+ c1_can_0 {
+ groups = "c1_can_grp0";
+ function = "c1_can_m0";
+ };
+ };
+
+ c1_can_pmx1: c1_can@1 {
+ c1_can_1 {
+ groups = "c1_can_grp1";
+ function = "c1_can_m1";
+ };
+ };
+
+ c1_can_pmx2: c1_can@2 {
+ c1_can_2 {
+ groups = "c1_can_grp2";
+ function = "c1_can_m2";
+ };
+ };
+
+ ca_audio_lpc_pmx: ca_audio_lpc@0 {
+ ca_audio_lpc {
+ groups = "ca_audio_lpc_grp";
+ function = "ca_audio_lpc";
+ };
+ };
+
+ ca_bt_lpc_pmx: ca_bt_lpc@0 {
+ ca_bt_lpc {
+ groups = "ca_bt_lpc_grp";
+ function = "ca_bt_lpc";
+ };
+ };
+
+ ca_coex_pmx: ca_coex@0 {
+ ca_coex {
+ groups = "ca_coex_grp";
+ function = "ca_coex";
+ };
+ };
+
+ ca_curator_lpc_pmx: ca_curator_lpc@0 {
+ ca_curator_lpc {
+ groups = "ca_curator_lpc_grp";
+ function = "ca_curator_lpc";
+ };
+ };
+
+ ca_pcm_debug_pmx: ca_pcm_debug@0 {
+ ca_pcm_debug {
+ groups = "ca_pcm_debug_grp";
+ function = "ca_pcm_debug";
+ };
+ };
+
+ ca_pio_pmx: ca_pio@0 {
+ ca_pio {
+ groups = "ca_pio_grp";
+ function = "ca_pio";
+ };
+ };
+
+ ca_sdio_debug_pmx: ca_sdio_debug@0 {
+ ca_sdio_debug {
+ groups = "ca_sdio_debug_grp";
+ function = "ca_sdio_debug";
+ };
+ };
+
+ ca_spi_pmx: ca_spi@0 {
+ ca_spi {
+ groups = "ca_spi_grp";
+ function = "ca_spi";
+ };
+ };
+
+ ca_trb_pmx: ca_trb@0 {
+ ca_trb {
+ groups = "ca_trb_grp";
+ function = "ca_trb";
+ };
+ };
+
+ ca_uart_debug_pmx: ca_uart_debug@0 {
+ ca_uart_debug {
+ groups = "ca_uart_debug_grp";
+ function = "ca_uart_debug";
+ };
+ };
+
+ clkc_pmx0: clkc@0 {
+ clkc_0 {
+ groups = "clkc_grp0";
+ function = "clkc_m0";
+ };
+ };
+
+ clkc_pmx1: clkc@1 {
+ clkc_1 {
+ groups = "clkc_grp1";
+ function = "clkc_m1";
+ };
+ };
+
+ gn_gnss_i2c_pmx: gn_gnss_i2c@0 {
+ gn_gnss_i2c {
+ groups = "gn_gnss_i2c_grp";
+ function = "gn_gnss_i2c";
+ };
+ };
+
+ gn_gnss_uart_nopause_pmx: gn_gnss_uart_nopause@0 {
+ gn_gnss_uart_nopause {
+ groups = "gn_gnss_uart_nopause_grp";
+ function = "gn_gnss_uart_nopause";
+ };
+ };
+
+ gn_gnss_uart_pmx: gn_gnss_uart@0 {
+ gn_gnss_uart {
+ groups = "gn_gnss_uart_grp";
+ function = "gn_gnss_uart";
+ };
+ };
+
+ gn_trg_spi_pmx0: gn_trg_spi@0 {
+ gn_trg_spi_0 {
+ groups = "gn_trg_spi_grp0";
+ function = "gn_trg_spi_m0";
+ };
+ };
+
+ gn_trg_spi_pmx1: gn_trg_spi@1 {
+ gn_trg_spi_1 {
+ groups = "gn_trg_spi_grp1";
+ function = "gn_trg_spi_m1";
+ };
+ };
+
+ cvbs_dbg_pmx: cvbs_dbg@0 {
+ cvbs_dbg {
+ groups = "cvbs_dbg_grp";
+ function = "cvbs_dbg";
+ };
+ };
+
+ cvbs_dbg_test_pmx0: cvbs_dbg_test@0 {
+ cvbs_dbg_test_0 {
+ groups = "cvbs_dbg_test_grp0";
+ function = "cvbs_dbg_test_m0";
+ };
+ };
+
+ cvbs_dbg_test_pmx1: cvbs_dbg_test@1 {
+ cvbs_dbg_test_1 {
+ groups = "cvbs_dbg_test_grp1";
+ function = "cvbs_dbg_test_m1";
+ };
+ };
+
+ cvbs_dbg_test_pmx2: cvbs_dbg_test@2 {
+ cvbs_dbg_test_2 {
+ groups = "cvbs_dbg_test_grp2";
+ function = "cvbs_dbg_test_m2";
+ };
+ };
+
+ cvbs_dbg_test_pmx3: cvbs_dbg_test@3 {
+ cvbs_dbg_test_3 {
+ groups = "cvbs_dbg_test_grp3";
+ function = "cvbs_dbg_test_m3";
+ };
+ };
+
+ cvbs_dbg_test_pmx4: cvbs_dbg_test@4 {
+ cvbs_dbg_test_4 {
+ groups = "cvbs_dbg_test_grp4";
+ function = "cvbs_dbg_test_m4";
+ };
+ };
+
+ cvbs_dbg_test_pmx5: cvbs_dbg_test@5 {
+ cvbs_dbg_test_5 {
+ groups = "cvbs_dbg_test_grp5";
+ function = "cvbs_dbg_test_m5";
+ };
+ };
+
+ cvbs_dbg_test_pmx6: cvbs_dbg_test@6 {
+ cvbs_dbg_test_6 {
+ groups = "cvbs_dbg_test_grp6";
+ function = "cvbs_dbg_test_m6";
+ };
+ };
+
+ cvbs_dbg_test_pmx7: cvbs_dbg_test@7 {
+ cvbs_dbg_test_7 {
+ groups = "cvbs_dbg_test_grp7";
+ function = "cvbs_dbg_test_m7";
+ };
+ };
+
+ cvbs_dbg_test_pmx8: cvbs_dbg_test@8 {
+ cvbs_dbg_test_8 {
+ groups = "cvbs_dbg_test_grp8";
+ function = "cvbs_dbg_test_m8";
+ };
+ };
+
+ cvbs_dbg_test_pmx9: cvbs_dbg_test@9 {
+ cvbs_dbg_test_9 {
+ groups = "cvbs_dbg_test_grp9";
+ function = "cvbs_dbg_test_m9";
+ };
+ };
+
+ cvbs_dbg_test_pmx10: cvbs_dbg_test@10 {
+ cvbs_dbg_test_10 {
+ groups = "cvbs_dbg_test_grp10";
+ function = "cvbs_dbg_test_m10";
+ };
+ };
+
+ cvbs_dbg_test_pmx11: cvbs_dbg_test@11 {
+ cvbs_dbg_test_11 {
+ groups = "cvbs_dbg_test_grp11";
+ function = "cvbs_dbg_test_m11";
+ };
+ };
+
+ cvbs_dbg_test_pmx12: cvbs_dbg_test@12 {
+ cvbs_dbg_test_12 {
+ groups = "cvbs_dbg_test_grp12";
+ function = "cvbs_dbg_test_m12";
+ };
+ };
+
+ cvbs_dbg_test_pmx13: cvbs_dbg_test@13 {
+ cvbs_dbg_test_13 {
+ groups = "cvbs_dbg_test_grp13";
+ function = "cvbs_dbg_test_m13";
+ };
+ };
+
+ cvbs_dbg_test_pmx14: cvbs_dbg_test@14 {
+ cvbs_dbg_test_14 {
+ groups = "cvbs_dbg_test_grp14";
+ function = "cvbs_dbg_test_m14";
+ };
+ };
+
+ cvbs_dbg_test_pmx15: cvbs_dbg_test@15 {
+ cvbs_dbg_test_15 {
+ groups = "cvbs_dbg_test_grp15";
+ function = "cvbs_dbg_test_m15";
+ };
+ };
+
+ gn_gnss_power_pmx: gn_gnss_power@0 {
+ gn_gnss_power {
+ groups = "gn_gnss_power_grp";
+ function = "gn_gnss_power";
+ };
+ };
+
+ gn_gnss_sw_status_pmx: gn_gnss_sw_status@0 {
+ gn_gnss_sw_status {
+ groups = "gn_gnss_sw_status_grp";
+ function = "gn_gnss_sw_status";
+ };
+ };
+
+ gn_gnss_eclk_pmx: gn_gnss_eclk@0 {
+ gn_gnss_eclk {
+ groups = "gn_gnss_eclk_grp";
+ function = "gn_gnss_eclk";
+ };
+ };
+
+ gn_gnss_irq1_pmx0: gn_gnss_irq1@0 {
+ gn_gnss_irq1_0 {
+ groups = "gn_gnss_irq1_grp0";
+ function = "gn_gnss_irq1_m0";
+ };
+ };
+
+ gn_gnss_irq2_pmx0: gn_gnss_irq2@0 {
+ gn_gnss_irq2_0 {
+ groups = "gn_gnss_irq2_grp0";
+ function = "gn_gnss_irq2_m0";
+ };
+ };
+
+ gn_gnss_tm_pmx: gn_gnss_tm@0 {
+ gn_gnss_tm {
+ groups = "gn_gnss_tm_grp";
+ function = "gn_gnss_tm";
+ };
+ };
+
+ gn_gnss_tsync_pmx: gn_gnss_tsync@0 {
+ gn_gnss_tsync {
+ groups = "gn_gnss_tsync_grp";
+ function = "gn_gnss_tsync";
+ };
+ };
+
+ gn_io_gnsssys_sw_cfg_pmx: gn_io_gnsssys_sw_cfg@0 {
+ gn_io_gnsssys_sw_cfg {
+ groups = "gn_io_gnsssys_sw_cfg_grp";
+ function = "gn_io_gnsssys_sw_cfg";
+ };
+ };
+
+ gn_trg_pmx0: gn_trg@0 {
+ gn_trg_0 {
+ groups = "gn_trg_grp0";
+ function = "gn_trg_m0";
+ };
+ };
+
+ gn_trg_pmx1: gn_trg@1 {
+ gn_trg_1 {
+ groups = "gn_trg_grp1";
+ function = "gn_trg_m1";
+ };
+ };
+
+ gn_trg_shutdown_pmx0: gn_trg_shutdown@0 {
+ gn_trg_shutdown_0 {
+ groups = "gn_trg_shutdown_grp0";
+ function = "gn_trg_shutdown_m0";
+ };
+ };
+
+ gn_trg_shutdown_pmx1: gn_trg_shutdown@1 {
+ gn_trg_shutdown_1 {
+ groups = "gn_trg_shutdown_grp1";
+ function = "gn_trg_shutdown_m1";
+ };
+ };
+
+ gn_trg_shutdown_pmx2: gn_trg_shutdown@2 {
+ gn_trg_shutdown_2 {
+ groups = "gn_trg_shutdown_grp2";
+ function = "gn_trg_shutdown_m2";
+ };
+ };
+
+ gn_trg_shutdown_pmx3: gn_trg_shutdown@3 {
+ gn_trg_shutdown_3 {
+ groups = "gn_trg_shutdown_grp3";
+ function = "gn_trg_shutdown_m3";
+ };
+ };
+
+ i2c0_pmx: i2c0@0 {
+ i2c0 {
+ groups = "i2c0_grp";
+ function = "i2c0";
+ };
+ };
+
+ i2c1_pmx: i2c1@0 {
+ i2c1 {
+ groups = "i2c1_grp";
+ function = "i2c1";
+ };
+ };
+
+ jtag_pmx0: jtag@0 {
+ jtag_0 {
+ groups = "jtag_grp0";
+ function = "jtag_m0";
+ };
+ };
+
+ ks_kas_spi_pmx0: ks_kas_spi@0 {
+ ks_kas_spi_0 {
+ groups = "ks_kas_spi_grp0";
+ function = "ks_kas_spi_m0";
+ };
+ };
+
+ ld_ldd_pmx: ld_ldd@0 {
+ ld_ldd {
+ groups = "ld_ldd_grp";
+ function = "ld_ldd";
+ };
+ };
+
+ ld_ldd_16bit_pmx: ld_ldd_16bit@0 {
+ ld_ldd_16bit {
+ groups = "ld_ldd_16bit_grp";
+ function = "ld_ldd_16bit";
+ };
+ };
+
+ ld_ldd_fck_pmx: ld_ldd_fck@0 {
+ ld_ldd_fck {
+ groups = "ld_ldd_fck_grp";
+ function = "ld_ldd_fck";
+ };
+ };
+
+ ld_ldd_lck_pmx: ld_ldd_lck@0 {
+ ld_ldd_lck {
+ groups = "ld_ldd_lck_grp";
+ function = "ld_ldd_lck";
+ };
+ };
+
+ lr_lcdrom_pmx: lr_lcdrom@0 {
+ lr_lcdrom {
+ groups = "lr_lcdrom_grp";
+ function = "lr_lcdrom";
+ };
+ };
+
+ lvds_analog_pmx: lvds_analog@0 {
+ lvds_analog {
+ groups = "lvds_analog_grp";
+ function = "lvds_analog";
+ };
+ };
+
+ nd_df_pmx: nd_df@0 {
+ nd_df {
+ groups = "nd_df_grp";
+ function = "nd_df";
+ };
+ };
+
+ nd_df_nowp_pmx: nd_df_nowp@0 {
+ nd_df_nowp {
+ groups = "nd_df_nowp_grp";
+ function = "nd_df_nowp";
+ };
+ };
+
+ ps_pmx: ps@0 {
+ ps {
+ groups = "ps_grp";
+ function = "ps";
+ };
+ };
+
+ pwc_core_on_pmx: pwc_core_on@0 {
+ pwc_core_on {
+ groups = "pwc_core_on_grp";
+ function = "pwc_core_on";
+ };
+ };
+
+ pwc_ext_on_pmx: pwc_ext_on@0 {
+ pwc_ext_on {
+ groups = "pwc_ext_on_grp";
+ function = "pwc_ext_on";
+ };
+ };
+
+ pwc_gpio3_clk_pmx: pwc_gpio3_clk@0 {
+ pwc_gpio3_clk {
+ groups = "pwc_gpio3_clk_grp";
+ function = "pwc_gpio3_clk";
+ };
+ };
+
+ pwc_io_on_pmx: pwc_io_on@0 {
+ pwc_io_on {
+ groups = "pwc_io_on_grp";
+ function = "pwc_io_on";
+ };
+ };
+
+ pwc_lowbatt_b_pmx0: pwc_lowbatt_b@0 {
+ pwc_lowbatt_b_0 {
+ groups = "pwc_lowbatt_b_grp0";
+ function = "pwc_lowbatt_b_m0";
+ };
+ };
+
+ pwc_mem_on_pmx: pwc_mem_on@0 {
+ pwc_mem_on {
+ groups = "pwc_mem_on_grp";
+ function = "pwc_mem_on";
+ };
+ };
+
+ pwc_on_key_b_pmx0: pwc_on_key_b@0 {
+ pwc_on_key_b_0 {
+ groups = "pwc_on_key_b_grp0";
+ function = "pwc_on_key_b_m0";
+ };
+ };
+
+ pwc_wakeup_src0_pmx: pwc_wakeup_src0@0 {
+ pwc_wakeup_src0 {
+ groups = "pwc_wakeup_src0_grp";
+ function = "pwc_wakeup_src0";
+ };
+ };
+
+ pwc_wakeup_src1_pmx: pwc_wakeup_src1@0 {
+ pwc_wakeup_src1 {
+ groups = "pwc_wakeup_src1_grp";
+ function = "pwc_wakeup_src1";
+ };
+ };
+
+ pwc_wakeup_src2_pmx: pwc_wakeup_src2@0 {
+ pwc_wakeup_src2 {
+ groups = "pwc_wakeup_src2_grp";
+ function = "pwc_wakeup_src2";
+ };
+ };
+
+ pwc_wakeup_src3_pmx: pwc_wakeup_src3@0 {
+ pwc_wakeup_src3 {
+ groups = "pwc_wakeup_src3_grp";
+ function = "pwc_wakeup_src3";
+ };
+ };
+
+ pw_cko0_pmx0: pw_cko0@0 {
+ pw_cko0_0 {
+ groups = "pw_cko0_grp0";
+ function = "pw_cko0_m0";
+ };
+ };
+
+ pw_cko0_pmx1: pw_cko0@1 {
+ pw_cko0_1 {
+ groups = "pw_cko0_grp1";
+ function = "pw_cko0_m1";
+ };
+ };
+
+ pw_cko0_pmx2: pw_cko0@2 {
+ pw_cko0_2 {
+ groups = "pw_cko0_grp2";
+ function = "pw_cko0_m2";
+ };
+ };
+
+ pw_cko1_pmx0: pw_cko1@0 {
+ pw_cko1_0 {
+ groups = "pw_cko1_grp0";
+ function = "pw_cko1_m0";
+ };
+ };
+
+ pw_cko1_pmx1: pw_cko1@1 {
+ pw_cko1_1 {
+ groups = "pw_cko1_grp1";
+ function = "pw_cko1_m1";
+ };
+ };
+
+ pw_i2s01_clk_pmx0: pw_i2s01_clk@0 {
+ pw_i2s01_clk_0 {
+ groups = "pw_i2s01_clk_grp0";
+ function = "pw_i2s01_clk_m0";
+ };
+ };
+
+ pw_i2s01_clk_pmx1: pw_i2s01_clk@1 {
+ pw_i2s01_clk_1 {
+ groups = "pw_i2s01_clk_grp1";
+ function = "pw_i2s01_clk_m1";
+ };
+ };
+
+ pw_pwm0_pmx: pw_pwm0@0 {
+ pw_pwm0 {
+ groups = "pw_pwm0_grp";
+ function = "pw_pwm0";
+ };
+ };
+
+ pw_pwm1_pmx: pw_pwm1@0 {
+ pw_pwm1 {
+ groups = "pw_pwm1_grp";
+ function = "pw_pwm1";
+ };
+ };
+
+ pw_pwm2_pmx0: pw_pwm2@0 {
+ pw_pwm2_0 {
+ groups = "pw_pwm2_grp0";
+ function = "pw_pwm2_m0";
+ };
+ };
+
+ pw_pwm2_pmx1: pw_pwm2@1 {
+ pw_pwm2_1 {
+ groups = "pw_pwm2_grp1";
+ function = "pw_pwm2_m1";
+ };
+ };
+
+ pw_pwm3_pmx0: pw_pwm3@0 {
+ pw_pwm3_0 {
+ groups = "pw_pwm3_grp0";
+ function = "pw_pwm3_m0";
+ };
+ };
+
+ pw_pwm3_pmx1: pw_pwm3@1 {
+ pw_pwm3_1 {
+ groups = "pw_pwm3_grp1";
+ function = "pw_pwm3_m1";
+ };
+ };
+
+ pw_pwm_cpu_vol_pmx0: pw_pwm_cpu_vol@0 {
+ pw_pwm_cpu_vol_0 {
+ groups = "pw_pwm_cpu_vol_grp0";
+ function = "pw_pwm_cpu_vol_m0";
+ };
+ };
+
+ pw_pwm_cpu_vol_pmx1: pw_pwm_cpu_vol@1 {
+ pw_pwm_cpu_vol_1 {
+ groups = "pw_pwm_cpu_vol_grp1";
+ function = "pw_pwm_cpu_vol_m1";
+ };
+ };
+
+ pw_backlight_pmx0: pw_backlight@0 {
+ pw_backlight_0 {
+ groups = "pw_backlight_grp0";
+ function = "pw_backlight_m0";
+ };
+ };
+
+ pw_backlight_pmx1: pw_backlight@1 {
+ pw_backlight_1 {
+ groups = "pw_backlight_grp1";
+ function = "pw_backlight_m1";
+ };
+ };
+
+ rg_eth_mac_pmx: rg_eth_mac@0 {
+ rg_eth_mac {
+ groups = "rg_eth_mac_grp";
+ function = "rg_eth_mac";
+ };
+ };
+
+ rg_gmac_phy_intr_n_pmx: rg_gmac_phy_intr_n@0 {
+ rg_gmac_phy_intr_n {
+ groups = "rg_gmac_phy_intr_n_grp";
+ function = "rg_gmac_phy_intr_n";
+ };
+ };
+
+ rg_rgmii_mac_pmx: rg_rgmii_mac@0 {
+ rg_rgmii_mac {
+ groups = "rg_rgmii_mac_grp";
+ function = "rg_rgmii_mac";
+ };
+ };
+
+ rg_rgmii_phy_ref_clk_pmx0: rg_rgmii_phy_ref_clk@0 {
+ rg_rgmii_phy_ref_clk_0 {
+ groups =
+ "rg_rgmii_phy_ref_clk_grp0";
+ function =
+ "rg_rgmii_phy_ref_clk_m0";
+ };
+ };
+
+ rg_rgmii_phy_ref_clk_pmx1: rg_rgmii_phy_ref_clk@1 {
+ rg_rgmii_phy_ref_clk_1 {
+ groups =
+ "rg_rgmii_phy_ref_clk_grp1";
+ function =
+ "rg_rgmii_phy_ref_clk_m1";
+ };
+ };
+
+ sd0_pmx: sd0@0 {
+ sd0 {
+ groups = "sd0_grp";
+ function = "sd0";
+ };
+ };
+
+ sd0_4bit_pmx: sd0_4bit@0 {
+ sd0_4bit {
+ groups = "sd0_4bit_grp";
+ function = "sd0_4bit";
+ };
+ };
+
+ sd1_pmx: sd1@0 {
+ sd1 {
+ groups = "sd1_grp";
+ function = "sd1";
+ };
+ };
+
+ sd1_4bit_pmx0: sd1_4bit@0 {
+ sd1_4bit_0 {
+ groups = "sd1_4bit_grp0";
+ function = "sd1_4bit_m0";
+ };
+ };
+
+ sd1_4bit_pmx1: sd1_4bit@1 {
+ sd1_4bit_1 {
+ groups = "sd1_4bit_grp1";
+ function = "sd1_4bit_m1";
+ };
+ };
+
+ sd2_pmx0: sd2@0 {
+ sd2_0 {
+ groups = "sd2_grp0";
+ function = "sd2_m0";
+ };
+ };
+
+ sd2_no_cdb_pmx0: sd2_no_cdb@0 {
+ sd2_no_cdb_0 {
+ groups = "sd2_no_cdb_grp0";
+ function = "sd2_no_cdb_m0";
+ };
+ };
+
+ sd3_pmx: sd3@0 {
+ sd3 {
+ groups = "sd3_grp";
+ function = "sd3";
+ };
+ };
+
+ sd5_pmx: sd5@0 {
+ sd5 {
+ groups = "sd5_grp";
+ function = "sd5";
+ };
+ };
+
+ sd6_pmx0: sd6@0 {
+ sd6_0 {
+ groups = "sd6_grp0";
+ function = "sd6_m0";
+ };
+ };
+
+ sd6_pmx1: sd6@1 {
+ sd6_1 {
+ groups = "sd6_grp1";
+ function = "sd6_m1";
+ };
+ };
+
+ sp0_ext_ldo_on_pmx: sp0_ext_ldo_on@0 {
+ sp0_ext_ldo_on {
+ groups = "sp0_ext_ldo_on_grp";
+ function = "sp0_ext_ldo_on";
+ };
+ };
+
+ sp0_qspi_pmx: sp0_qspi@0 {
+ sp0_qspi {
+ groups = "sp0_qspi_grp";
+ function = "sp0_qspi";
+ };
+ };
+
+ sp1_spi_pmx: sp1_spi@0 {
+ sp1_spi {
+ groups = "sp1_spi_grp";
+ function = "sp1_spi";
+ };
+ };
+
+ tpiu_trace_pmx: tpiu_trace@0 {
+ tpiu_trace {
+ groups = "tpiu_trace_grp";
+ function = "tpiu_trace";
+ };
+ };
+
+ uart0_pmx: uart0@0 {
+ uart0 {
+ groups = "uart0_grp";
+ function = "uart0";
+ };
+ };
+
<
projects / linux-drm-fsl-dcu.git / commitdiff