network device. This is used by the bootwrapper to interpret
MAC addresses passed by the firmware when no information other
than indices is available to associate an address with a device.
+ - phy-connection-type : a string naming the controller/PHY interface type,
+ i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "tbi",
+ or "rtbi".
Example:
ucc@2000 {
rx-clock = "none";
tx-clock = "clk9";
phy-handle = <212000>;
+ phy-connection-type = "gmii";
pio-handle = <140001>;
};
default y
depends on BUG
+config SYS_SUPPORTS_APM_EMULATION
+ bool
+
#
# Powerpc uses the slab allocator to manage its ptes and the
# page structs of ptes are used for splitting the page table
Used to allow a board to specify it wants a uImage built by default
default n
+config PPC64_SWSUSP
+ bool
+ depends on PPC64 && (BROKEN || (PPC_PMAC64 && EXPERIMENTAL))
+ default y
+
menu "Processor support"
choice
prompt "Processor Type"
config PCI
bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
- || MPC7448HPC2 || PPC_PS3
+ || MPC7448HPC2 || PPC_PS3 || PPC_HOLLY
default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
&& !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
CPPFLAGS_vmlinux.lds := -Upowerpc
-BOOT_TARGETS = zImage zImage.initrd uImage cuImage
+BOOT_TARGETS = zImage zImage.initrd uImage
PHONY += $(BOOT_TARGETS)
zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
zliblinuxheader := zlib.h zconf.h zutil.h
-$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \
- $(addprefix $(obj)/,$(zlibheader))
+$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
+ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c
-src-plat := of.c cuboot-83xx.c cuboot-85xx.c
+src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
-image-$(CONFIG_DEFAULT_UIMAGE) += uImage cuImage
+image-$(CONFIG_PPC_HOLLY) += zImage.holly-elf
+image-$(CONFIG_DEFAULT_UIMAGE) += uImage
+
+ifneq ($(CONFIG_DEVICE_TREE),"")
+image-$(CONFIG_PPC_83xx) += cuImage.83xx
+image-$(CONFIG_PPC_85xx) += cuImage.85xx
+endif
# For 32-bit powermacs, build the COFF and miboot images
# as well as the ELF images.
$(obj)/zImage.initrd.ps3: vmlinux
@echo " WARNING zImage.initrd.ps3 not supported (yet)"
+$(obj)/zImage.holly-elf: vmlinux $(wrapperbits)
+ $(call if_changed,wrap,holly,$(obj)/dts/holly.dts,,)
+
+$(obj)/zImage.initrd.holly-elf: vmlinux $(wrapperbits) $(obj)/ramdisk.image.gz
+ $(call if_changed,wrap,holly,$(obj)/dts/holly.dts,,$(obj)/ramdisk.image.gz)
+
$(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot)
-cuboot-plat-$(CONFIG_83xx) += 83xx
-cuboot-plat-$(CONFIG_85xx) += 85xx
-cuboot-plat-y += unknown-platform
-
+# CONFIG_DEVICE_TREE will have "" around it, make sure to strip them
dts = $(if $(shell echo $(CONFIG_DEVICE_TREE) | grep '^/'),\
- ,$(srctree)/$(src)/dts/)$(CONFIG_DEVICE_TREE)
+ ,$(srctree)/$(src)/dts/)$(CONFIG_DEVICE_TREE:"%"=%)
-$(obj)/cuImage: vmlinux $(wrapperbits)
- $(call if_changed,wrap,cuboot-$(word 1,$(cuboot-plat-y)),$(dts))
+$(obj)/cuImage.%: vmlinux $(dts) $(wrapperbits)
+ $(call if_changed,wrap,cuboot-$*,$(dts))
$(obj)/zImage: $(addprefix $(obj)/, $(image-y))
@rm -f $@; ln $< $@
sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
# anything not in $(targets)
-clean-files += $(image-) $(initrd-) zImage zImage.initrd \
- cuImage.elf cuImage.bin.gz
+clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.*
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin
--- /dev/null
+/*
+ * Device Tree Source for IBM Holly (PPC 750CL with TSI controller)
+ * Copyright 2007, IBM Corporation
+ *
+ * Stephen Winiecki <stevewin@us.ibm.com>
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * To build:
+ * dtc -I dts -O asm -o holly.S -b 0 holly.dts
+ * dtc -I dts -O dtb -o holly.dtb -b 0 holly.dts
+ */
+
+/ {
+ model = "41K7339";
+ compatible = "ibm,holly";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells =<0>;
+ PowerPC,750CL@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <8000>;
+ i-cache-size = <8000>;
+ d-cache-sets = <80>;
+ i-cache-sets = <80>;
+ timebase-frequency = <2faf080>;
+ clock-frequency = <23c34600>;
+ bus-frequency = <bebc200>;
+ 32-bit;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <00000000 20000000>;
+ };
+
+ tsi109@c0000000 {
+ device_type = "tsi-bridge";
+ compatible = "tsi-bridge";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <00000000 c0000000 00010000>;
+ reg = <c0000000 00010000>;
+
+ i2c@7000 {
+ device_type = "i2c";
+ compatible = "tsi-i2c";
+ interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
+ interrupts = <e 2>;
+ reg = <7000 400>;
+ };
+
+ mdio@6000 {
+ device_type = "mdio";
+ compatible = "tsi-ethernet";
+
+ PHY1: ethernet-phy@6000 {
+ device_type = "ethernet-phy";
+ compatible = "bcm54xx";
+ reg = <6000 50>;
+ phy-id = <1>;
+ };
+
+ PHY2: ethernet-phy@6400 {
+ device_type = "ethernet-phy";
+ compatible = "bcm54xx";
+ reg = <6000 50>;
+ phy-id = <2>;
+ };
+ };
+
+ ethernet@6200 {
+ device_type = "network";
+ compatible = "tsi-ethernet";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6000 200>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
+ interrupts = <10 2>;
+ phy-handle = <&PHY1>;
+ };
+
+ ethernet@6600 {
+ device_type = "network";
+ compatible = "tsi-ethernet";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6400 200>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
+ interrupts = <11 2>;
+ phy-handle = <&PHY2>;
+ };
+
+ serial@7808 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <7808 200>;
+ virtual-reg = <c0007808>;
+ clock-frequency = <3F9C6000>;
+ current-speed = <1c200>;
+ interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
+ interrupts = <c 2>;
+ };
+
+ serial@7c08 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <7c08 200>;
+ virtual-reg = <c0007c08>;
+ clock-frequency = <3F9C6000>;
+ current-speed = <1c200>;
+ interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
+ interrupts = <d 2>;
+ };
+
+ MPIC: pic@7400 {
+ device_type = "open-pic";
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <7400 400>;
+ big-endian;
+ };
+
+ pci@1000 {
+ device_type = "pci";
+ compatible = "tsi109";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <1000 1000>;
+ bus-range = <0 0>;
+ /*----------------------------------------------------+
+ | PCI memory range.
+ | 01 denotes I/O space
+ | 02 denotes 32-bit memory space
+ +----------------------------------------------------*/
+ ranges = <02000000 0 40000000 40000000 0 10000000
+ 01000000 0 00000000 7e000000 0 00010000>;
+ clock-frequency = <7f28154>;
+ interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
+ interrupts = <17 2>;
+ interrupt-map-mask = <f800 0 0 7>;
+ /*----------------------------------------------------+
+ | The INTA, INTB, INTC, INTD are shared.
+ +----------------------------------------------------*/
+ interrupt-map = <
+ 0800 0 0 1 &RT0 24 0
+ 0800 0 0 2 &RT0 25 0
+ 0800 0 0 3 &RT0 26 0
+ 0800 0 0 4 &RT0 27 0
+
+ 1000 0 0 1 &RT0 25 0
+ 1000 0 0 2 &RT0 26 0
+ 1000 0 0 3 &RT0 27 0
+ 1000 0 0 4 &RT0 24 0
+
+ 1800 0 0 1 &RT0 26 0
+ 1800 0 0 2 &RT0 27 0
+ 1800 0 0 3 &RT0 24 0
+ 1800 0 0 4 &RT0 25 0
+
+ 2000 0 0 1 &RT0 27 0
+ 2000 0 0 2 &RT0 24 0
+ 2000 0 0 3 &RT0 25 0
+ 2000 0 0 4 &RT0 26 0
+ >;
+
+ RT0: router@1180 {
+ device_type = "pic-router";
+ interrupt-controller;
+ big-endian;
+ clock-frequency = <0>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <17 2>;
+ interrupt-parent = < &/tsi109@c0000000/pic@7400 >;
+ };
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/tsi109@c0000000/serial@7808";
+ bootargs = "console=ttyS0,115200";
+ };
+};
soc5200@f0000000 {
model = "fsl,mpc5200";
+ compatible = "mpc5200";
revision = "" // from bootloader
#interrupt-cells = <3>;
device_type = "soc";
device_type = "mscan";
compatible = "mpc5200-mscan";
cell-index = <1>;
- interrupts = <1 12 0>;
+ interrupts = <2 12 0>;
interrupt-parent = <500>;
reg = <980 80>;
};
interrupt-parent = <500>;
};
- gpio-wkup@b00 {
+ gpio-wkup@c00 {
compatible = "mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
i2c@3d00 {
device_type = "i2c";
- compatible = "mpc5200-i2c";
+ compatible = "mpc5200-i2c\0fsl-i2c";
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
+ fsl5200-clocking;
};
i2c@3d40 {
device_type = "i2c";
- compatible = "mpc5200-i2c";
+ compatible = "mpc5200-i2c\0fsl-i2c";
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
+ fsl5200-clocking;
};
sram@8000 {
device_type = "sram";
soc5200@f0000000 {
model = "fsl,mpc5200b";
+ compatible = "mpc5200";
revision = ""; // from bootloader
#interrupt-cells = <3>;
device_type = "soc";
device_type = "mscan";
compatible = "mpc5200b-mscan\0mpc5200-mscan";
cell-index = <1>;
- interrupts = <1 12 0>;
+ interrupts = <2 12 0>;
interrupt-parent = <500>;
reg = <980 80>;
};
interrupt-parent = <500>;
};
- gpio-wkup@b00 {
+ gpio-wkup@c00 {
compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
i2c@3d00 {
device_type = "i2c";
- compatible = "mpc5200b-i2c\0mpc5200-i2c";
+ compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
+ fsl5200-clocking;
};
i2c@3d40 {
device_type = "i2c";
- compatible = "mpc5200b-i2c\0mpc5200-i2c";
+ compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
+ fsl5200-clocking;
};
sram@8000 {
device_type = "sram";
interrupts = <11 8>;
reg = <3>;
device_type = "ethernet-phy";
- interface = <3>; //ENET_100_MII
};
phy4: ethernet-phy@04 {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <4>;
device_type = "ethernet-phy";
- interface = <3>;
};
};
interrupts = <0>;
reg = <0>;
device_type = "ethernet-phy";
- interface = <3>; //ENET_100_MII
};
phy04:ethernet-phy@04 {
interrupt-parent = <&pic>;
interrupts = <0>;
reg = <4>;
device_type = "ethernet-phy";
- interface = <3>;
};
};
rx-clock = <0>;
tx-clock = <19>;
phy-handle = < &phy0 >;
+ phy-connection-type = "rgmii-id";
pio-handle = < &pio1 >;
};
rx-clock = <0>;
tx-clock = <14>;
phy-handle = < &phy1 >;
+ phy-connection-type = "rgmii-id";
pio-handle = < &pio2 >;
};
interrupts = <11 8>;
reg = <0>;
device_type = "ethernet-phy";
- interface = <6>; //ENET_1000_GMII
};
phy1: ethernet-phy@01 {
interrupt-parent = < &ipic >;
interrupts = <12 8>;
reg = <1>;
device_type = "ethernet-phy";
- interface = <6>;
};
};
rx-clock = <0>;
tx-clock = <19>;
phy-handle = <&qe_phy0>;
+ phy-connection-type = "gmii";
pio-handle = <&pio1>;
};
rx-clock = <0>;
tx-clock = <14>;
phy-handle = <&qe_phy1>;
+ phy-connection-type = "gmii";
pio-handle = <&pio2>;
};
interrupts = <31 1>;
reg = <0>;
device_type = "ethernet-phy";
- interface = <6>; //ENET_1000_GMII
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <1>;
device_type = "ethernet-phy";
- interface = <6>;
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <2>;
device_type = "ethernet-phy";
- interface = <6>; //ENET_1000_GMII
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <3>;
device_type = "ethernet-phy";
- interface = <6>; //ENET_1000_GMII
};
};
--- /dev/null
+/*
+ * Copyright 2007 IBM Corporation
+ *
+ * Stephen Winiecki <stevewin@us.ibm.com>
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Based on earlier code:
+ * Copyright (C) Paul Mackerras 1997.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "io.h"
+
+extern char _start[];
+extern char _end[];
+extern char _dtb_start[];
+extern char _dtb_end[];
+
+BSS_STACK(4096);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
+{
+ u32 heapsize = 0x8000000 - (u32)_end; /* 128M */
+
+ simple_alloc_init(_end, heapsize, 32, 64);
+ ft_init(_dtb_start, 0, 4);
+ serial_console_init();
+}
vmz="$vmz$gzip"
-case "$platform" in
-uboot|cuboot*)
- version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
- cut -d' ' -f3`
- if [ -n "$version" ]; then
- version="-n Linux-$version"
- fi
-esac
+# Extract kernel version information, some platforms want to include
+# it in the image header
+version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
+ cut -d' ' -f3`
+if [ -n "$version" ]; then
+ uboot_version="-n Linux-$version"
+fi
case "$platform" in
uboot)
rm -f "$ofile"
mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
- $version -d "$vmz" "$ofile"
+ $uboot_version -d "$vmz" "$ofile"
if [ -z "$cacheit" ]; then
rm -f "$vmz"
fi
rm $tmp
fi
+# Some platforms need the zImage's entry point and base address
+base=0x`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1`
+entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3`
+
# post-processing needed for some platforms
case "$platform" in
pseries|chrp)
$object/addnote "$ofile"
;;
pmaccoff)
- entry=`objdump -f "$ofile" | grep '^start address ' | \
- cut -d' ' -f3`
${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
$object/hack-coff "$ofile"
;;
cuboot*)
- base=`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1`
- entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | \
- cut -d' ' -f3`
mv "$ofile" "$ofile".elf
${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin
gzip -f -9 "$ofile".bin
mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
- $version -d "$ofile".bin.gz "$ofile"
+ $uboot_version -d "$ofile".bin.gz "$ofile"
;;
esac
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21
+# Sat May 5 11:02:35 2007
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+CONFIG_EMBEDDED6xx=y
+# CONFIG_APUS is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_LINKSTATION is not set
+# CONFIG_MPC7448HPC2 is not set
+CONFIG_PPC_HOLLY=y
+CONFIG_TSI108_BRIDGE=y
+CONFIG_MPIC=y
+CONFIG_MPIC_WEIRD=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_CPM2 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_WANT_DEVICE_TREE is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_INDIRECT_PCI is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_TSI108_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+# CONFIG_UCC_FAST is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_XMON_DISASSEMBLY=y
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Tue Jan 30 14:27:25 2007
+# Linux kernel version: 2.6.21-rc5
+# Mon Apr 9 16:09:16 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
-# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_83xx=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_QUICC_ENGINE=y
-CONFIG_PPC_GEN550=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
# Platform support
#
+# CONFIG_MPC8313_RDB is not set
CONFIG_MPC832x_MDS=y
-# CONFIG_MPC834x_SYS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC8360E_PB is not set
+# CONFIG_MPC836x_MDS is not set
CONFIG_PPC_MPC832x=y
# CONFIG_MPIC is not set
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
#
# Bus options
#
+CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# PHY device support
#
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMOND is not set
# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
#
# Multimedia devices
#
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
# HID Devices
#
CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
#
# USB support
# DMA Devices
#
+#
+# Auxiliary Display support
+#
+
#
# Virtualization
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
-
-#
-# QE Options
-#
-CONFIG_UCC_SLOW=y
+# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
#
# Instrumentation Support
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_BOOTX_TEXT is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3
-# Mon Mar 12 17:32:19 2007
+# Linux kernel version: 2.6.21-rc5
+# Mon Apr 9 16:12:43 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_QUICC_ENGINE=y
-CONFIG_PPC_GEN550=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
#
# PHY device support
#
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_ICPLUS_PHY=y
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
# Distributed Lock Manager
#
# CONFIG_DLM is not set
-
-#
-# QE Options
-#
-CONFIG_UCC_SLOW=y
+# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_BOOTX_TEXT is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sat Feb 17 10:09:26 2007
+# Linux kernel version: 2.6.21-rc5
+# Mon Apr 9 16:14:05 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_QUICC_ENGINE=y
-CONFIG_PPC_GEN550=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
#
# CONFIG_MPC8313_RDB is not set
# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
CONFIG_MPC836x_MDS=y
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# PHY device support
#
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
# CONFIG_UGETH_FILTERING is not set
# CONFIG_UGETH_TX_ON_DEMOND is not set
# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
#
# Multimedia devices
#
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
# Distributed Lock Manager
#
# CONFIG_DLM is not set
-
-#
-# QE Options
-#
-CONFIG_UCC_SLOW=y
+# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_BOOTX_TEXT is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc6
-# Thu Jan 25 13:35:34 2007
+# Linux kernel version: 2.6.21
+# Mon Apr 30 12:03:35 2007
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
+# CONFIG_PPC_CELLEB is not set
+CONFIG_PPC_PS3=y
+
+#
+# PS3 Platform Options
+#
+# CONFIG_PS3_ADVANCED is not set
+CONFIG_PS3_HTAB_SIZE=20
+# CONFIG_PS3_DYNAMIC_DMA is not set
+CONFIG_PS3_USE_LPAR_ADDR=y
+CONFIG_PS3_VUART=y
+CONFIG_PS3_PS3AV=y
+CONFIG_PS3_SYS_MANAGER=y
CONFIG_PPC_CELL=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
-CONFIG_PPC_PS3=y
+
+#
+# Cell Broadband Engine options
+#
+CONFIG_SPU_FS=y
+CONFIG_SPU_BASE=y
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
# CONFIG_U3_DART is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-# CONFIG_MPIC is not set
-
-#
-# Cell Broadband Engine options
-#
-CONFIG_SPU_FS=y
-CONFIG_SPU_BASE=y
-# CONFIG_CBE_RAS is not set
-
-#
-# PS3 Platform Options
-#
-CONFIG_PS3_HTAB_SIZE=20
-# CONFIG_PS3_DYNAMIC_DMA is not set
-CONFIG_PS3_USE_LPAR_ADDR=y
-CONFIG_PS3_VUART=y
-CONFIG_PS3_PS3AV=y
+# CONFIG_CPM2 is not set
#
# Kernel options
# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
-CONFIG_FORCE_MAX_ZONEORDER=9
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_IOMMU_VMERGE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
# CONFIG_NUMA is not set
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_PPC_64K_PAGES=y
+# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="root=/dev/sda1 ip=dhcp"
+# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
+# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
+CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+# CONFIG_BT_RFCOMM_TTY is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
# CONFIG_IEEE80211 is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
#
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65535
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
-# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
+CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=y
+CONFIG_MII=m
#
# Ethernet (1000 Mbit)
#
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
# Wan interfaces
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
#
# IPMI
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
#
# Multimedia devices
#
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_OF is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA PowerMac devices
+#
+
+#
+# ALSA PowerMac requires I2C
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
#
# HID Devices
#
CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
#
# USB support
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
#
# may also be needed; see USB_STORAGE Help for more information
#
-CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
#
# USB Input Devices
#
-CONFIG_USB_HID=y
+CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET_MII=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
-CONFIG_USB_NET_MCS7830=y
+CONFIG_USB_NET_MCS7830=m
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
#
# USB DSL modem support
# DMA Devices
#
+#
+# Auxiliary Display support
+#
+
#
# Virtualization
#
#
# File systems
#
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
+CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=y
+CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=y
+CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
+CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# Distributed Lock Manager
#
# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+# CONFIG_UCC_FAST is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
#
# Instrumentation Support
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_LIST=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
#
# Security options
#
# Cryptographic options
#
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
+obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o suspend.o
obj32-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_32.o
-obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend.o
+obj64-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_64.o swsusp_asm64.o
obj32-$(CONFIG_MODULES) += module_32.o
ifeq ($(CONFIG_PPC_MERGE),y)
#include <linux/types.h>
#include <linux/mman.h>
#include <linux/mm.h>
+#include <linux/suspend.h>
#ifdef CONFIG_PPC64
#include <linux/time.h>
#include <linux/hardirq.h>
#else
#include <linux/ptrace.h>
-#include <linux/suspend.h>
#endif
#include <asm/io.h>
DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
DEFINE(CPU_SPEC_RESTORE, offsetof(struct cpu_spec, cpu_restore));
-#ifndef CONFIG_PPC64
DEFINE(pbe_address, offsetof(struct pbe, address));
DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
DEFINE(pbe_next, offsetof(struct pbe, next));
+#ifndef CONFIG_PPC64
DEFINE(TASK_SIZE, TASK_SIZE);
DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28);
#endif /* ! CONFIG_PPC64 */
* Configure and load pinned entry into TLB slot 63.
*/
- lis r3,KERNELBASE@h /* Load the kernel virtual address */
- ori r3,r3,KERNELBASE@l
+ lis r3,PAGE_OFFSET@h
+ ori r3,r3,PAGE_OFFSET@l
/* Kernel is at the base of RAM */
li r4, 0 /* Load the kernel physical address */
#include <asm/smp.h>
#ifdef CONFIG_HOTPLUG_CPU
+/* this is used for software suspend, and that shuts down
+ * CPUs even while the system is still booting... */
#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \
- system_state == SYSTEM_RUNNING)
+ (system_state == SYSTEM_RUNNING \
+ || system_state == SYSTEM_BOOTING))
#else
#define cpu_should_die() 0
#endif
isync
b 1b
+_GLOBAL(power4_cpu_offline_powersave)
+ /* Go to NAP now */
+ mfmsr r7
+ rldicl r0,r7,48,1
+ rotldi r0,r0,16
+ mtmsrd r0,1 /* hard-disable interrupts */
+ li r0,1
+ li r6,0
+ stb r0,PACAHARDIRQEN(r13) /* we'll hard-enable shortly */
+ stb r6,PACASOFTIRQEN(r13) /* soft-disable irqs */
+BEGIN_FTR_SECTION
+ DSSALL
+ sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ ori r7,r7,MSR_EE
+ oris r7,r7,MSR_POW@h
+ sync
+ isync
+ mtmsrd r7
+ isync
+ blr
#ifdef CONFIG_PPC64
#include <asm/paca.h>
#include <asm/firmware.h>
+#include <asm/lv1call.h>
#endif
int __irq_offset_value;
local_paca->hard_enabled = en;
if ((int)mfspr(SPRN_DEC) < 0)
mtspr(SPRN_DEC, 1);
+
+ /*
+ * Force the delivery of pending soft-disabled interrupts on PS3.
+ * Any HV call will have this side effect.
+ */
+ if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
+ u64 tmp;
+ lv1_get_version_info(&tmp);
+ }
+
hard_irq_enable();
}
#endif /* CONFIG_PPC64 */
return 1;
}
-static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
if (post_kprobe_handler(args->regs))
ret = NOTIFY_STOP;
break;
- case DIE_PAGE_FAULT:
- /* kprobe_running() needs smp_processor_id() */
- preempt_disable();
- if (kprobe_running() &&
- kprobe_fault_handler(args->regs, args->trapnr))
- ret = NOTIFY_STOP;
- preempt_enable();
- break;
default:
break;
}
* doesn't work for these settings, you'll have to add your own special
* cases here
*/
- if (device_is_compatible(pci_dev, "pci13a8,152") ||
- device_is_compatible(pci_dev, "pci13a8,154") ||
- device_is_compatible(pci_dev, "pci13a8,158")) {
+ if (of_device_is_compatible(pci_dev, "pci13a8,152") ||
+ of_device_is_compatible(pci_dev, "pci13a8,154") ||
+ of_device_is_compatible(pci_dev, "pci13a8,158")) {
addr += 0x200 * lindex;
base += 0x200 * lindex;
} else {
/* Check for known pciclass, and also check wether we have
* a device with child nodes for ports or not
*/
- if (device_is_compatible(np, "pciclass,0700") ||
- device_is_compatible(np, "pciclass,070002"))
+ if (of_device_is_compatible(np, "pciclass,0700") ||
+ of_device_is_compatible(np, "pciclass,070002"))
pci = np;
- else if (device_is_compatible(parent, "pciclass,0700") ||
- device_is_compatible(parent, "pciclass,070002"))
+ else if (of_device_is_compatible(parent, "pciclass,0700") ||
+ of_device_is_compatible(parent, "pciclass,070002"))
pci = parent;
else {
of_node_put(parent);
match &= node->type
&& !strcmp(matches->type, node->type);
if (matches->compatible[0])
- match &= device_is_compatible(node,
+ match &= of_device_is_compatible(node,
matches->compatible);
if (match)
return matches;
}
-static ssize_t of_device_get_modalias(struct of_device *ofdev,
- char *str, ssize_t len)
+ssize_t of_device_get_modalias(struct of_device *ofdev,
+ char *str, ssize_t len)
{
const char *compat;
int cplen, i;
EXPORT_SYMBOL(of_dev_put);
EXPORT_SYMBOL(of_release_dev);
EXPORT_SYMBOL(of_device_uevent);
+EXPORT_SYMBOL(of_device_get_modalias);
int i;
if (page_is_ram(pfn))
- return prot;
+ return __pgprot(prot);
prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
switch ((pci_space >> 24) & 0x3) {
case 1: /* I/O space */
- hose->io_base_phys = cpu_phys_addr;
- hose->pci_io_size = size;
+ hose->io_base_phys = cpu_phys_addr - pci_addr;
+ /* handle from 0 to top of I/O window */
+ hose->pci_io_size = pci_addr + size;
res = &hose->io_resource;
res->flags = IORESOURCE_IO;
} else {
/* Root Bus */
res = &hose->io_resource;
- *start_phys = hose->io_base_phys;
- *start_virt = (unsigned long) hose->io_base_virt;
+ *start_phys = hose->io_base_phys + res->start;
+ *start_virt = (unsigned long) hose->io_base_virt + res->start;
if (res->end > res->start)
*size = res->end - res->start + 1;
else {
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(DMA_MODE_READ);
EXPORT_SYMBOL(DMA_MODE_WRITE);
-EXPORT_SYMBOL(__div64_32);
EXPORT_SYMBOL(do_signal);
EXPORT_SYMBOL(transfer_to_handler);
* If problems seem to show up, it would be a good start to track
* them down.
*/
-static void reserve_mem(u64 base, u64 size)
+static void __init reserve_mem(u64 base, u64 size)
{
u64 top = base + size;
unsigned long cnt = RELOC(mem_reserve_cnt);
3,12,0, 3,13,0, 3,14,0, 3,15,0 };
struct subst_entry efika_subst_table[] = {
{ "/", "device_type", prop_cstr("efika") },
- { "/builtin", "compatible", prop_cstr("soc") },
+ { "/builtin", "device_type", prop_cstr("soc") },
{ "/builtin/ata", "compatible", prop_cstr("mpc5200b-ata\0mpc5200-ata"), },
{ "/builtin/bestcomm", "compatible", prop_cstr("mpc5200b-bestcomm\0mpc5200-bestcomm") },
{ "/builtin/bestcomm", "interrupts", prop_bcomm_irq, sizeof(prop_bcomm_irq) },
}
EXPORT_SYMBOL(of_get_mac_address);
+int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
+{
+ int irq = irq_of_parse_and_map(dev, index);
+
+ /* Only dereference the resource if both the
+ * resource and the irq are valid. */
+ if (r && irq != NO_IRQ) {
+ r->start = r->end = irq;
+ r->flags = IORESOURCE_IRQ;
+ }
+
+ return irq;
+}
+EXPORT_SYMBOL_GPL(of_irq_to_resource);
+
+void __iomem *of_iomap(struct device_node *np, int index)
+{
+ struct resource res;
+
+ if (of_address_to_resource(np, index, &res))
+ return NULL;
+
+ return ioremap(res.start, 1 + res.end - res.start);
+}
+EXPORT_SYMBOL(of_iomap);
#define SMP_CALL_TIMEOUT 8
/*
- * This function sends a 'generic call function' IPI to all other CPUs
- * in the system.
+ * These functions send a 'generic call function' IPI to other online
+ * CPUS in the system.
*
- * [SUMMARY] Run a function on all other CPUs.
+ * [SUMMARY] Run a function on other CPUs.
* <func> The function to run. This must be fast and non-blocking.
* <info> An arbitrary pointer to pass to the function.
* <nonatomic> currently unused.
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler.
*/
-int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
- int wait)
-{
+int smp_call_function_map(void (*func) (void *info), void *info, int nonatomic,
+ int wait, cpumask_t map)
+{
struct call_data_struct data;
- int ret = -1, cpus;
+ int ret = -1, num_cpus;
+ int cpu;
u64 timeout;
/* Can deadlock when called with interrupts disabled */
WARN_ON(irqs_disabled());
+ /* remove 'self' from the map */
+ if (cpu_isset(smp_processor_id(), map))
+ cpu_clear(smp_processor_id(), map);
+
+ /* sanity check the map, remove any non-online processors. */
+ cpus_and(map, map, cpu_online_map);
+
if (unlikely(smp_ops == NULL))
- return -1;
+ return ret;
data.func = func;
data.info = info;
spin_lock(&call_lock);
/* Must grab online cpu count with preempt disabled, otherwise
* it can change. */
- cpus = num_online_cpus() - 1;
- if (!cpus) {
+ num_cpus = num_online_cpus() - 1;
+ if (!num_cpus || cpus_empty(map)) {
ret = 0;
goto out;
}
call_data = &data;
smp_wmb();
- /* Send a message to all other CPUs and wait for them to respond */
- smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_CALL_FUNCTION);
+ /* Send a message to all CPUs in the map */
+ for_each_cpu_mask(cpu, map)
+ smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec;
- /* Wait for response */
- while (atomic_read(&data.started) != cpus) {
+ /* Wait for indication that they have received the message */
+ while (atomic_read(&data.started) != num_cpus) {
HMT_low();
if (get_tb() >= timeout) {
printk("smp_call_function on cpu %d: other cpus not "
- "responding (%d)\n", smp_processor_id(),
- atomic_read(&data.started));
+ "responding (%d)\n", smp_processor_id(),
+ atomic_read(&data.started));
debugger(NULL);
goto out;
}
}
+ /* optionally wait for the CPUs to complete */
if (wait) {
- while (atomic_read(&data.finished) != cpus) {
+ while (atomic_read(&data.finished) != num_cpus) {
HMT_low();
if (get_tb() >= timeout) {
printk("smp_call_function on cpu %d: other "
- "cpus not finishing (%d/%d)\n",
- smp_processor_id(),
- atomic_read(&data.finished),
- atomic_read(&data.started));
+ "cpus not finishing (%d/%d)\n",
+ smp_processor_id(),
+ atomic_read(&data.finished),
+ atomic_read(&data.started));
debugger(NULL);
goto out;
}
return ret;
}
+int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
+ int wait)
+{
+ return smp_call_function_map(func,info,nonatomic,wait,cpu_online_map);
+}
EXPORT_SYMBOL(smp_call_function);
+int smp_call_function_single(int cpu, void (*func) (void *info), void *info, int nonatomic,
+ int wait)
+{
+ cpumask_t map=CPU_MASK_NONE;
+
+ if (!cpu_online(cpu))
+ return -EINVAL;
+
+ if (cpu == smp_processor_id())
+ return -EBUSY;
+
+ cpu_set(cpu, map);
+ return smp_call_function_map(func,info,nonatomic,wait,map);
+}
+EXPORT_SYMBOL(smp_call_function_single);
+
void smp_call_function_interrupt(void)
{
void (*func) (void *info);
--- /dev/null
+/*
+ * Common powerpc suspend code for 32 and 64 bits
+ *
+ * Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <asm/suspend.h>
+#include <asm/system.h>
+#include <asm/current.h>
+#include <asm/mmu_context.h>
+
+void save_processor_state(void)
+{
+ /*
+ * flush out all the special registers so we don't need
+ * to save them in the snapshot
+ */
+ flush_fp_to_thread(current);
+ flush_altivec_to_thread(current);
+ flush_spe_to_thread(current);
+
+#ifdef CONFIG_PPC64
+ hard_irq_disable();
+#endif
+
+}
+
+void restore_processor_state(void)
+{
+#ifdef CONFIG_PPC32
+ set_context(current->active_mm->context.id, current->active_mm->pgd);
+#endif
+
+#ifdef CONFIG_PPC64
+ hard_irq_enable();
+#endif
+}
--- /dev/null
+/*
+ * PowerPC 64-bit swsusp implementation
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * GPLv2
+ */
+
+#include <asm/system.h>
+#include <asm/iommu.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+void do_after_copyback(void)
+{
+ iommu_restore();
+ touch_softlockup_watchdog();
+ mb();
+}
+
+void _iommu_save(void)
+{
+ iommu_save();
+}
--- /dev/null
+/*
+ * PowerPC 64-bit swsusp implementation
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * GPLv2
+ */
+
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * Structure for storing CPU registers on the save area.
+ */
+#define SL_r1 0x00 /* stack pointer */
+#define SL_PC 0x08
+#define SL_MSR 0x10
+#define SL_SDR1 0x18
+#define SL_XER 0x20
+#define SL_TB 0x40
+#define SL_r2 0x48
+#define SL_CR 0x50
+#define SL_LR 0x58
+#define SL_r12 0x60
+#define SL_r13 0x68
+#define SL_r14 0x70
+#define SL_r15 0x78
+#define SL_r16 0x80
+#define SL_r17 0x88
+#define SL_r18 0x90
+#define SL_r19 0x98
+#define SL_r20 0xa0
+#define SL_r21 0xa8
+#define SL_r22 0xb0
+#define SL_r23 0xb8
+#define SL_r24 0xc0
+#define SL_r25 0xc8
+#define SL_r26 0xd0
+#define SL_r27 0xd8
+#define SL_r28 0xe0
+#define SL_r29 0xe8
+#define SL_r30 0xf0
+#define SL_r31 0xf8
+#define SL_SIZE SL_r31+8
+
+/* these macros rely on the save area being
+ * pointed to by r11 */
+#define SAVE_SPECIAL(special) \
+ mf##special r0 ;\
+ std r0, SL_##special(r11)
+#define RESTORE_SPECIAL(special) \
+ ld r0, SL_##special(r11) ;\
+ mt##special r0
+#define SAVE_REGISTER(reg) \
+ std reg, SL_##reg(r11)
+#define RESTORE_REGISTER(reg) \
+ ld reg, SL_##reg(r11)
+
+/* space for storing cpu state */
+ .section .data
+ .align 5
+swsusp_save_area:
+ .space SL_SIZE
+
+ .section ".toc","aw"
+swsusp_save_area_ptr:
+ .tc swsusp_save_area[TC],swsusp_save_area
+restore_pblist_ptr:
+ .tc restore_pblist[TC],restore_pblist
+
+ .section .text
+ .align 5
+_GLOBAL(swsusp_arch_suspend)
+ ld r11,swsusp_save_area_ptr@toc(r2)
+ SAVE_SPECIAL(LR)
+ SAVE_REGISTER(r1)
+ SAVE_SPECIAL(CR)
+ SAVE_SPECIAL(TB)
+ SAVE_REGISTER(r2)
+ SAVE_REGISTER(r12)
+ SAVE_REGISTER(r13)
+ SAVE_REGISTER(r14)
+ SAVE_REGISTER(r15)
+ SAVE_REGISTER(r16)
+ SAVE_REGISTER(r17)
+ SAVE_REGISTER(r18)
+ SAVE_REGISTER(r19)
+ SAVE_REGISTER(r20)
+ SAVE_REGISTER(r21)
+ SAVE_REGISTER(r22)
+ SAVE_REGISTER(r23)
+ SAVE_REGISTER(r24)
+ SAVE_REGISTER(r25)
+ SAVE_REGISTER(r26)
+ SAVE_REGISTER(r27)
+ SAVE_REGISTER(r28)
+ SAVE_REGISTER(r29)
+ SAVE_REGISTER(r30)
+ SAVE_REGISTER(r31)
+ SAVE_SPECIAL(MSR)
+ SAVE_SPECIAL(SDR1)
+ SAVE_SPECIAL(XER)
+
+ /* we push the stack up 128 bytes but don't store the
+ * stack pointer on the stack like a real stackframe */
+ addi r1,r1,-128
+
+ bl _iommu_save
+ bl swsusp_save
+
+ /* restore LR */
+ ld r11,swsusp_save_area_ptr@toc(r2)
+ RESTORE_SPECIAL(LR)
+ addi r1,r1,128
+
+ blr
+
+/* Resume code */
+_GLOBAL(swsusp_arch_resume)
+ /* Stop pending alitvec streams and memory accesses */
+BEGIN_FTR_SECTION
+ DSSALL
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ sync
+
+ ld r12,restore_pblist_ptr@toc(r2)
+ ld r12,0(r12)
+
+ cmpdi r12,0
+ beq- nothing_to_copy
+ li r15,512
+copyloop:
+ ld r13,pbe_address(r12)
+ ld r14,pbe_orig_address(r12)
+
+ mtctr r15
+ li r10,0
+copy_page_loop:
+ ldx r0,r10,r13
+ stdx r0,r10,r14
+ addi r10,r10,8
+ bdnz copy_page_loop
+
+ ld r12,pbe_next(r12)
+ cmpdi r12,0
+ bne+ copyloop
+nothing_to_copy:
+
+ /* flush caches */
+ lis r3, 0x10
+ mtctr r3
+ li r3, 0
+ ori r3, r3, CONFIG_KERNEL_START>>48
+ li r0, 48
+ sld r3, r3, r0
+ li r0, 0
+1:
+ dcbf r0,r3
+ addi r3,r3,0x20
+ bdnz 1b
+
+ sync
+
+ tlbia
+
+ ld r11,swsusp_save_area_ptr@toc(r2)
+
+ RESTORE_SPECIAL(CR)
+
+ /* restore timebase */
+ /* load saved tb */
+ ld r1, SL_TB(r11)
+ /* get upper 32 bits of it */
+ srdi r2, r1, 32
+ /* clear tb lower to avoid wrap */
+ li r0, 0
+ mttbl r0
+ /* set tb upper */
+ mttbu r2
+ /* set tb lower */
+ mttbl r1
+
+ /* restore registers */
+ RESTORE_REGISTER(r1)
+ RESTORE_REGISTER(r2)
+ RESTORE_REGISTER(r12)
+ RESTORE_REGISTER(r13)
+ RESTORE_REGISTER(r14)
+ RESTORE_REGISTER(r15)
+ RESTORE_REGISTER(r16)
+ RESTORE_REGISTER(r17)
+ RESTORE_REGISTER(r18)
+ RESTORE_REGISTER(r19)
+ RESTORE_REGISTER(r20)
+ RESTORE_REGISTER(r21)
+ RESTORE_REGISTER(r22)
+ RESTORE_REGISTER(r23)
+ RESTORE_REGISTER(r24)
+ RESTORE_REGISTER(r25)
+ RESTORE_REGISTER(r26)
+ RESTORE_REGISTER(r27)
+ RESTORE_REGISTER(r28)
+ RESTORE_REGISTER(r29)
+ RESTORE_REGISTER(r30)
+ RESTORE_REGISTER(r31)
+ /* can't use RESTORE_SPECIAL(MSR) */
+ ld r0, SL_MSR(r11)
+ mtmsrd r0, 0
+ RESTORE_SPECIAL(SDR1)
+ RESTORE_SPECIAL(XER)
+
+ sync
+
+ addi r1,r1,-128
+ bl slb_flush_and_rebolt
+ bl do_after_copyback
+ addi r1,r1,128
+
+ ld r11,swsusp_save_area_ptr@toc(r2)
+ RESTORE_SPECIAL(LR)
+
+ li r3, 0
+ blr
return 0;
}
-__initcall(topology_init);
+subsys_initcall(topology_init);
{
while (ids->type[0] != '\0') {
if ((strncmp(dev->type, ids->type, strlen(ids->type)) == 0) &&
- device_is_compatible(dev->dev.archdata.of_node,
+ of_device_is_compatible(dev->dev.archdata.of_node,
ids->compat))
return ids;
ids++;
*
*/
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/page.h>
#include "mmu_decl.h"
-extern char etext[], _stext[];
-
/* Used by the 44x TLB replacement exception handler.
* Just needed it declared someplace.
*/
-unsigned int tlb_44x_index = 0;
-unsigned int tlb_44x_hwater = 62;
+unsigned int tlb_44x_index; /* = 0 */
+unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
/*
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem
*/
-static void __init
-ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys)
+static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
{
- unsigned long attrib = 0;
-
- __asm__ __volatile__("\
- clrrwi %2,%2,10\n\
- ori %2,%2,%4\n\
- clrrwi %1,%1,10\n\
- li %0,0\n\
- ori %0,%0,%5\n\
- tlbwe %2,%3,%6\n\
- tlbwe %1,%3,%7\n\
- tlbwe %0,%3,%8"
+ __asm__ __volatile__(
+ "tlbwe %2,%3,%4\n"
+ "tlbwe %1,%3,%5\n"
+ "tlbwe %0,%3,%6\n"
:
- : "r" (attrib), "r" (phys), "r" (virt), "r" (slot),
- "i" (PPC44x_TLB_VALID | PPC44x_TLB_256M),
- "i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+ : "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+ "r" (phys),
+ "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
+ "r" (tlb_44x_hwater--), /* slot for this TLB entry */
"i" (PPC44x_TLB_PAGEID),
"i" (PPC44x_TLB_XLAT),
"i" (PPC44x_TLB_ATTRIB));
}
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
void __init MMU_init_hw(void)
{
flush_instruction_cache();
unsigned long __init mmu_mapin_ram(void)
{
- unsigned int pinned_tlbs = 1;
- int i;
-
- /* Determine number of entries necessary to cover lowmem */
- pinned_tlbs = (unsigned int)
- (_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT);
-
- /* Write upper watermark to save location */
- tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs;
+ unsigned long addr;
- /* If necessary, set additional pinned TLBs */
- if (pinned_tlbs > 1)
- for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) {
- unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE;
- ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr);
- }
+ /* Pin in enough TLBs to cover any lowmem not covered by the
+ * initial 256M mapping established in head_44x.S */
+ for (addr = PPC_PIN_SIZE; addr < total_lowmem;
+ addr += PPC_PIN_SIZE)
+ ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
return total_lowmem;
}
#include <asm/kdebug.h>
#include <asm/siginfo.h>
-#ifdef CONFIG_KPROBES
-ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
-/* Hook to register for page fault notifications */
-int register_page_fault_notifier(struct notifier_block *nb)
-{
- return atomic_notifier_chain_register(¬ify_page_fault_chain, nb);
-}
-
-int unregister_page_fault_notifier(struct notifier_block *nb)
+#ifdef CONFIG_KPROBES
+static inline int notify_page_fault(struct pt_regs *regs)
{
- return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb);
-}
+ int ret = 0;
+
+ /* kprobe_running() needs smp_processor_id() */
+ if (!user_mode(regs)) {
+ preempt_disable();
+ if (kprobe_running() && kprobe_fault_handler(regs, 11))
+ ret = 1;
+ preempt_enable();
+ }
-static inline int notify_page_fault(enum die_val val, const char *str,
- struct pt_regs *regs, long err, int trap, int sig)
-{
- struct die_args args = {
- .regs = regs,
- .str = str,
- .err = err,
- .trapnr = trap,
- .signr = sig
- };
- return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args);
+ return ret;
}
#else
-static inline int notify_page_fault(enum die_val val, const char *str,
- struct pt_regs *regs, long err, int trap, int sig)
+static inline int notify_page_fault(struct pt_regs *regs)
{
- return NOTIFY_DONE;
+ return 0;
}
#endif
is_write = error_code & ESR_DST;
#endif /* CONFIG_4xx || CONFIG_BOOKE */
- if (notify_page_fault(DIE_PAGE_FAULT, "page_fault", regs, error_code,
- 11, SIGSEGV) == NOTIFY_STOP)
+ if (notify_page_fault(regs))
return 0;
if (trap == 0x300) {
#include <asm/tlb.h>
#include <asm/cputable.h>
#include <asm/udbg.h>
+#include <asm/kexec.h>
#ifdef DEBUG_LOW
#define DBG_LOW(fmt...) udbg_printf(fmt)
local_irq_restore(flags);
}
-/*
- * XXX This need fixing based on page size. It's only used by
- * native_hpte_clear() for now which needs fixing too so they
- * make a good pair...
- */
-static unsigned long slot2va(unsigned long hpte_v, unsigned long slot)
-{
- unsigned long avpn = HPTE_V_AVPN_VAL(hpte_v);
- unsigned long va;
+#define LP_SHIFT 12
+#define LP_BITS 8
+#define LP_MASK(i) ((0xFF >> (i)) << LP_SHIFT)
- va = avpn << 23;
+static void hpte_decode(hpte_t *hpte, unsigned long slot,
+ int *psize, unsigned long *va)
+{
+ unsigned long hpte_r = hpte->r;
+ unsigned long hpte_v = hpte->v;
+ unsigned long avpn;
+ int i, size, shift, penc, avpnm_bits;
+
+ if (!(hpte_v & HPTE_V_LARGE))
+ size = MMU_PAGE_4K;
+ else {
+ for (i = 0; i < LP_BITS; i++) {
+ if ((hpte_r & LP_MASK(i+1)) == LP_MASK(i+1))
+ break;
+ }
+ penc = LP_MASK(i+1) >> LP_SHIFT;
+ for (size = 0; size < MMU_PAGE_COUNT; size++) {
- if (! (hpte_v & HPTE_V_LARGE)) {
- unsigned long vpi, pteg;
+ /* 4K pages are not represented by LP */
+ if (size == MMU_PAGE_4K)
+ continue;
- pteg = slot / HPTES_PER_GROUP;
- if (hpte_v & HPTE_V_SECONDARY)
- pteg = ~pteg;
+ /* valid entries have a shift value */
+ if (!mmu_psize_defs[size].shift)
+ continue;
- vpi = ((va >> 28) ^ pteg) & htab_hash_mask;
+ if (penc == mmu_psize_defs[size].penc)
+ break;
+ }
+ }
- va |= vpi << PAGE_SHIFT;
+ /*
+ * FIXME, the code below works for 16M, 64K, and 4K pages as these
+ * fall under the p<=23 rules for calculating the virtual address.
+ * In the case of 16M pages, an extra bit is stolen from the AVPN
+ * field to achieve the requisite 24 bits.
+ *
+ * Does not work for 16G pages or 1 TB segments.
+ */
+ shift = mmu_psize_defs[size].shift;
+ if (mmu_psize_defs[size].avpnm)
+ avpnm_bits = __ilog2_u64(mmu_psize_defs[size].avpnm) + 1;
+ else
+ avpnm_bits = 0;
+ if (shift - avpnm_bits <= 23) {
+ avpn = HPTE_V_AVPN_VAL(hpte_v) << 23;
+
+ if (shift < 23) {
+ unsigned long vpi, pteg;
+
+ pteg = slot / HPTES_PER_GROUP;
+ if (hpte_v & HPTE_V_SECONDARY)
+ pteg = ~pteg;
+ vpi = ((avpn >> 28) ^ pteg) & htab_hash_mask;
+ avpn |= (vpi << mmu_psize_defs[size].shift);
+ }
}
- return va;
+ *va = avpn;
+ *psize = size;
}
/*
*
* TODO: add batching support when enabled. remember, no dynamic memory here,
* athough there is the control page available...
- *
- * XXX FIXME: 4k only for now !
*/
static void native_hpte_clear(void)
{
unsigned long slot, slots, flags;
hpte_t *hptep = htab_address;
- unsigned long hpte_v;
+ unsigned long hpte_v, va;
unsigned long pteg_count;
+ int psize;
pteg_count = htab_hash_mask + 1;
* already hold the native_tlbie_lock.
*/
if (hpte_v & HPTE_V_VALID) {
+ hpte_decode(hptep, slot, &psize, &va);
hptep->v = 0;
- __tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K);
+ __tlbie(va, psize);
}
}
#ifdef CONFIG_DEBUG_PAGEALLOC
static u8 *linear_map_hash_slots;
static unsigned long linear_map_hash_count;
-static spinlock_t linear_map_hash_lock;
+static DEFINE_SPINLOCK(linear_map_hash_lock);
#endif /* CONFIG_DEBUG_PAGEALLOC */
/* There are definitions of page sizes arrays to be used when none
return 0;
#endif
}
-EXPORT_SYMBOL(page_is_ram);
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
extern unsigned long ioremap_base;
extern unsigned int rtas_data, rtas_size;
-extern PTE *Hash, *Hash_end;
+struct _PTE;
+extern struct _PTE *Hash, *Hash_end;
extern unsigned long Hash_size, Hash_mask;
extern unsigned int num_tlbcam_entries;
* the first (bolted) segment, so that do_stab_bolted won't get a
* recursive segment miss on the segment table itself.
*/
-void stabs_alloc(void)
+void __init stabs_alloc(void)
{
int cpu;
config PPC_MPC52xx
bool
+ select FSL_SOC
default n
config PPC_MPC5200
obj-$(CONFIG_PPC_EFIKA) += efika.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
+
+obj-$(CONFIG_PM) += mpc52xx_sleep.o mpc52xx_pm.o
of_node_put(root);
}
+#ifdef CONFIG_PM
+static void efika_suspend_prepare(void __iomem *mbar)
+{
+ u8 pin = 4; /* GPIO_WKUP_4 (GPIO_PSC6_0 - IRDA_RX) */
+ u8 level = 1; /* wakeup on high level */
+ /* IOW. to wake it up, short pins 1 and 3 on IRDA connector */
+ mpc52xx_set_wakeup_gpio(pin, level);
+}
+#endif
+
static void __init efika_setup_arch(void)
{
rtas_initialize();
efika_pcisetup();
+#ifdef CONFIG_PM
+ mpc52xx_suspend.board_suspend_prepare = efika_suspend_prepare;
+ mpc52xx_pm_init();
+#endif
+
if (ppc_md.progress)
ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0);
}
iounmap(gpio);
}
+#ifdef CONFIG_PM
+static u32 descr_a;
+static void lite5200_suspend_prepare(void __iomem *mbar)
+{
+ u8 pin = 1; /* GPIO_WKUP_1 (GPIO_PSC2_4) */
+ u8 level = 0; /* wakeup on low level */
+ mpc52xx_set_wakeup_gpio(pin, level);
+
+ /*
+ * power down usb port
+ * this needs to be called before of-ohci suspend code
+ */
+ descr_a = in_be32(mbar + 0x1048);
+ out_be32(mbar + 0x1048, (descr_a & ~0x200) | 0x100);
+}
+
+static void lite5200_resume_finish(void __iomem *mbar)
+{
+ out_be32(mbar + 0x1048, descr_a);
+}
+#endif
+
static void __init lite5200_setup_arch(void)
{
struct device_node *np;
mpc52xx_setup_cpu(); /* Generic */
lite5200_setup_cpu(); /* Platorm specific */
+#ifdef CONFIG_PM
+ mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare;
+ mpc52xx_suspend.board_resume_finish = lite5200_resume_finish;
+ mpc52xx_pm_init();
+#endif
+
#ifdef CONFIG_PCI
np = of_find_node_by_type(NULL, "pci");
if (np) {
--- /dev/null
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <asm/time.h>
+#include <asm/cacheflush.h>
+#include <asm/mpc52xx.h>
+
+#include "mpc52xx_pic.h"
+
+
+/* these are defined in mpc52xx_sleep.S, and only used here */
+extern void mpc52xx_deep_sleep(void *sram, void *sdram_regs,
+ struct mpc52xx_cdm *, struct mpc52xx_intr *);
+extern void mpc52xx_ds_sram(void);
+extern const long mpc52xx_ds_sram_size;
+extern void mpc52xx_ds_cached(void);
+extern const long mpc52xx_ds_cached_size;
+
+static void __iomem *mbar;
+static void __iomem *sdram;
+static struct mpc52xx_cdm __iomem *cdm;
+static struct mpc52xx_intr __iomem *intr;
+static struct mpc52xx_gpio_wkup __iomem *gpiow;
+static void *sram;
+static int sram_size;
+
+struct mpc52xx_suspend mpc52xx_suspend;
+
+static int mpc52xx_pm_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+int mpc52xx_set_wakeup_gpio(u8 pin, u8 level)
+{
+ u16 tmp;
+
+ /* enable gpio */
+ out_8(&gpiow->wkup_gpioe, in_8(&gpiow->wkup_gpioe) | (1 << pin));
+ /* set as input */
+ out_8(&gpiow->wkup_ddr, in_8(&gpiow->wkup_ddr) & ~(1 << pin));
+ /* enable deep sleep interrupt */
+ out_8(&gpiow->wkup_inten, in_8(&gpiow->wkup_inten) | (1 << pin));
+ /* low/high level creates wakeup interrupt */
+ tmp = in_be16(&gpiow->wkup_itype);
+ tmp &= ~(0x3 << (pin * 2));
+ tmp |= (!level + 1) << (pin * 2);
+ out_be16(&gpiow->wkup_itype, tmp);
+ /* master enable */
+ out_8(&gpiow->wkup_maste, 1);
+
+ return 0;
+}
+
+int mpc52xx_pm_prepare(suspend_state_t state)
+{
+ if (state != PM_SUSPEND_STANDBY)
+ return -EINVAL;
+
+ /* map the whole register space */
+ mbar = mpc52xx_find_and_map("mpc5200");
+ if (!mbar) {
+ printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__);
+ return -ENOSYS;
+ }
+ /* these offsets are from mpc5200 users manual */
+ sdram = mbar + 0x100;
+ cdm = mbar + 0x200;
+ intr = mbar + 0x500;
+ gpiow = mbar + 0xc00;
+ sram = mbar + 0x8000; /* Those will be handled by the */
+ sram_size = 0x4000; /* bestcomm driver soon */
+
+ /* call board suspend code, if applicable */
+ if (mpc52xx_suspend.board_suspend_prepare)
+ mpc52xx_suspend.board_suspend_prepare(mbar);
+ else {
+ printk(KERN_ALERT "%s: %i don't know how to wake up the board\n",
+ __func__, __LINE__);
+ goto out_unmap;
+ }
+
+ return 0;
+
+ out_unmap:
+ iounmap(mbar);
+ return -ENOSYS;
+}
+
+
+char saved_sram[0x4000];
+
+int mpc52xx_pm_enter(suspend_state_t state)
+{
+ u32 clk_enables;
+ u32 msr, hid0;
+ u32 intr_main_mask;
+ void __iomem * irq_0x500 = (void *)CONFIG_KERNEL_START + 0x500;
+ unsigned long irq_0x500_stop = (unsigned long)irq_0x500 + mpc52xx_ds_cached_size;
+ char saved_0x500[mpc52xx_ds_cached_size];
+
+ /* disable all interrupts in PIC */
+ intr_main_mask = in_be32(&intr->main_mask);
+ out_be32(&intr->main_mask, intr_main_mask | 0x1ffff);
+
+ /* don't let DEC expire any time soon */
+ mtspr(SPRN_DEC, 0x7fffffff);
+
+ /* save SRAM */
+ memcpy(saved_sram, sram, sram_size);
+
+ /* copy low level suspend code to sram */
+ memcpy(sram, mpc52xx_ds_sram, mpc52xx_ds_sram_size);
+
+ out_8(&cdm->ccs_sleep_enable, 1);
+ out_8(&cdm->osc_sleep_enable, 1);
+ out_8(&cdm->ccs_qreq_test, 1);
+
+ /* disable all but SDRAM and bestcomm (SRAM) clocks */
+ clk_enables = in_be32(&cdm->clk_enables);
+ out_be32(&cdm->clk_enables, clk_enables & 0x00088000);
+
+ /* disable power management */
+ msr = mfmsr();
+ mtmsr(msr & ~MSR_POW);
+
+ /* enable sleep mode, disable others */
+ hid0 = mfspr(SPRN_HID0);
+ mtspr(SPRN_HID0, (hid0 & ~(HID0_DOZE | HID0_NAP | HID0_DPM)) | HID0_SLEEP);
+
+ /* save original, copy our irq handler, flush from dcache and invalidate icache */
+ memcpy(saved_0x500, irq_0x500, mpc52xx_ds_cached_size);
+ memcpy(irq_0x500, mpc52xx_ds_cached, mpc52xx_ds_cached_size);
+ flush_icache_range((unsigned long)irq_0x500, irq_0x500_stop);
+
+ /* call low-level sleep code */
+ mpc52xx_deep_sleep(sram, sdram, cdm, intr);
+
+ /* restore original irq handler */
+ memcpy(irq_0x500, saved_0x500, mpc52xx_ds_cached_size);
+ flush_icache_range((unsigned long)irq_0x500, irq_0x500_stop);
+
+ /* restore old power mode */
+ mtmsr(msr & ~MSR_POW);
+ mtspr(SPRN_HID0, hid0);
+ mtmsr(msr);
+
+ out_be32(&cdm->clk_enables, clk_enables);
+ out_8(&cdm->ccs_sleep_enable, 0);
+ out_8(&cdm->osc_sleep_enable, 0);
+
+ /* restore SRAM */
+ memcpy(sram, saved_sram, sram_size);
+
+ /* restart jiffies */
+ wakeup_decrementer();
+
+ /* reenable interrupts in PIC */
+ out_be32(&intr->main_mask, intr_main_mask);
+
+ return 0;
+}
+
+int mpc52xx_pm_finish(suspend_state_t state)
+{
+ /* call board resume code */
+ if (mpc52xx_suspend.board_resume_finish)
+ mpc52xx_suspend.board_resume_finish(mbar);
+
+ iounmap(mbar);
+
+ return 0;
+}
+
+static struct pm_ops mpc52xx_pm_ops = {
+ .valid = mpc52xx_pm_valid,
+ .prepare = mpc52xx_pm_prepare,
+ .enter = mpc52xx_pm_enter,
+ .finish = mpc52xx_pm_finish,
+};
+
+int __init mpc52xx_pm_init(void)
+{
+ pm_set_ops(&mpc52xx_pm_ops);
+ return 0;
+}
--- /dev/null
+#include <asm/reg.h>
+#include <asm/ppc_asm.h>
+#include <asm/processor.h>
+
+
+.text
+
+_GLOBAL(mpc52xx_deep_sleep)
+mpc52xx_deep_sleep: /* args r3-r6: SRAM, SDRAM regs, CDM regs, INTR regs */
+
+ /* enable interrupts */
+ mfmsr r7
+ ori r7, r7, 0x8000 /* EE */
+ mtmsr r7
+ sync; isync;
+
+ li r10, 0 /* flag that irq handler sets */
+
+ /* enable tmr7 (or any other) interrupt */
+ lwz r8, 0x14(r6) /* intr->main_mask */
+ ori r8, r8, 0x1
+ xori r8, r8, 0x1
+ stw r8, 0x14(r6)
+ sync
+
+ /* emulate tmr7 interrupt */
+ li r8, 0x1
+ stw r8, 0x40(r6) /* intr->main_emulate */
+ sync
+
+ /* wait for it to happen */
+1:
+ cmpi cr0, r10, 1
+ bne cr0, 1b
+
+ /* lock icache */
+ mfspr r10, SPRN_HID0
+ ori r10, r10, 0x2000
+ sync; isync;
+ mtspr SPRN_HID0, r10
+ sync; isync;
+
+
+ mflr r9 /* save LR */
+
+ /* jump to sram */
+ mtlr r3
+ blrl
+
+ mtlr r9 /* restore LR */
+
+ /* unlock icache */
+ mfspr r10, SPRN_HID0
+ ori r10, r10, 0x2000
+ xori r10, r10, 0x2000
+ sync; isync;
+ mtspr SPRN_HID0, r10
+ sync; isync;
+
+
+ /* return to C code */
+ blr
+
+
+_GLOBAL(mpc52xx_ds_sram)
+mpc52xx_ds_sram:
+ /* put SDRAM into self-refresh */
+ lwz r8, 0x4(r4) /* sdram->ctrl */
+
+ oris r8, r8, 0x8000 /* mode_en */
+ stw r8, 0x4(r4)
+ sync
+
+ ori r8, r8, 0x0002 /* soft_pre */
+ stw r8, 0x4(r4)
+ sync
+ xori r8, r8, 0x0002
+
+ xoris r8, r8, 0x8000 /* !mode_en */
+ stw r8, 0x4(r4)
+ sync
+
+ oris r8, r8, 0x5000
+ xoris r8, r8, 0x4000 /* ref_en !cke */
+ stw r8, 0x4(r4)
+ sync
+
+ /* disable SDRAM clock */
+ lwz r8, 0x14(r5) /* cdm->clkenable */
+ ori r8, r8, 0x0008
+ xori r8, r8, 0x0008
+ stw r8, 0x14(r5)
+ sync
+
+
+ /* put mpc5200 to sleep */
+ mfmsr r10
+ oris r10, r10, 0x0004 /* POW = 1 */
+ sync; isync;
+ mtmsr r10
+ sync; isync;
+
+
+ /* enable clock */
+ lwz r8, 0x14(r5)
+ ori r8, r8, 0x0008
+ stw r8, 0x14(r5)
+ sync
+
+ /* get ram out of self-refresh */
+ lwz r8, 0x4(r4)
+ oris r8, r8, 0x5000 /* cke ref_en */
+ stw r8, 0x4(r4)
+ sync
+
+ blr
+_GLOBAL(mpc52xx_ds_sram_size)
+mpc52xx_ds_sram_size:
+ .long $-mpc52xx_ds_sram
+
+
+/* ### interrupt handler for wakeup from deep-sleep ### */
+_GLOBAL(mpc52xx_ds_cached)
+mpc52xx_ds_cached:
+ mtspr SPRN_SPRG0, r7
+ mtspr SPRN_SPRG1, r8
+
+ /* disable emulated interrupt */
+ mfspr r7, 311 /* MBAR */
+ addi r7, r7, 0x540 /* intr->main_emul */
+ li r8, 0
+ stw r8, 0(r7)
+ sync
+ dcbf 0, r7
+
+ /* acknowledge wakeup, so CCS releases power pown */
+ mfspr r7, 311 /* MBAR */
+ addi r7, r7, 0x524 /* intr->enc_status */
+ lwz r8, 0(r7)
+ ori r8, r8, 0x0400
+ stw r8, 0(r7)
+ sync
+ dcbf 0, r7
+
+ /* flag - we handled the interrupt */
+ li r10, 1
+
+ mfspr r8, SPRN_SPRG1
+ mfspr r7, SPRN_SPRG0
+
+ rfi
+_GLOBAL(mpc52xx_ds_cached_size)
+mpc52xx_ds_cached_size:
+ .long $-mpc52xx_ds_cached
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
+ { .type = "mdio", },
{},
};
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
+ { .type = "mdio", },
{},
};
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
+ { .type = "mdio", },
{},
};
#ifdef CONFIG_PPC_I8259
/* Initialize the i8259 controller */
for_each_node_by_type(np, "interrupt-controller")
- if (device_is_compatible(np, "chrp,iic")) {
+ if (of_device_is_compatible(np, "chrp,iic")) {
cascade_node = np;
break;
}
#ifdef CONFIG_PPC_I8259
/* Initialize the i8259 controller */
for_each_node_by_type(np, "interrupt-controller")
- if (device_is_compatible(np, "chrp,iic")) {
+ if (of_device_is_compatible(np, "chrp,iic")) {
cascade_node = np;
break;
}
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
+ { .type = "mdio", },
{},
};
#ifdef CONFIG_PCI
/* Initialize i8259 controller */
for_each_node_by_type(np, "interrupt-controller")
- if (device_is_compatible(np, "chrp,iic")) {
+ if (of_device_is_compatible(np, "chrp,iic")) {
cascade_node = np;
break;
}
static int iic_host_match(struct irq_host *h, struct device_node *node)
{
- return device_is_compatible(node,
+ return of_device_is_compatible(node,
"IBM,CBEA-Internal-Interrupt-Controller");
}
unsigned int node, ext, unit, class;
const u32 *val;
- if (!device_is_compatible(ct,
+ if (!of_device_is_compatible(ct,
"IBM,CBEA-Internal-Interrupt-Controller"))
return -ENODEV;
if (intsize != 1)
for (dn = NULL;
(dn = of_find_node_by_name(dn,"interrupt-controller")) != NULL;) {
- if (!device_is_compatible(dn,
+ if (!of_device_is_compatible(dn,
"IBM,CBEA-Internal-Interrupt-Controller"))
continue;
np = of_get_property(dn, "ibm,interrupt-server-ranges", NULL);
for (dn = NULL;
(dn = of_find_node_by_name(dn, "interrupt-controller"));) {
- if (!device_is_compatible(dn, "CBEA,platform-open-pic"))
+ if (!of_device_is_compatible(dn, "CBEA,platform-open-pic"))
continue;
/* The MPIC driver will get everything it needs from the
*/
for (dn = NULL;
(dn = of_find_node_by_name(dn, "interrupt-controller"));) {
- if (device_is_compatible(dn, "CBEA,platform-spider-pic")) {
+ if (of_device_is_compatible(dn, "CBEA,platform-spider-pic")) {
if (of_address_to_resource(dn, 0, &r)) {
printk(KERN_WARNING "spider-pic: Failed\n");
continue;
}
- } else if (device_is_compatible(dn, "sti,platform-spider-pic")
+ } else if (of_device_is_compatible(dn, "sti,platform-spider-pic")
&& (chip < 2)) {
static long hard_coded_pics[] =
{ 0x24000008000ul, 0x34000008000ul};
model = of_get_property(dev, "model", NULL);
if (model == NULL)
model = "<none>";
- if (device_is_compatible(dev, "IBM,python")) {
+ if (of_device_is_compatible(dev, "IBM,python")) {
setup_python(hose, dev);
} else if (is_mot
|| strncmp(model, "Motorola, Grackle", 17) == 0) {
/* Look for cascade */
for_each_node_by_type(np, "interrupt-controller")
- if (device_is_compatible(np, "chrp,iic")) {
+ if (of_device_is_compatible(np, "chrp,iic")) {
pic = np;
break;
}
select TSI108_BRIDGE
select DEFAULT_UIMAGE
select PPC_UDBG_16550
- select MPIC
- select MPIC_WEIRD
help
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
platform
+
+config PPC_HOLLY
+ bool "PPC750GX/CL with TSI10x bridge (Hickory/Holly)"
+ select TSI108_BRIDGE
+ select PPC_UDBG_16550
+ help
+ Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
+ Board with TSI108/9 bridge (Hickory/Holly)
endchoice
config TSI108_BRIDGE
bool
- depends on MPC7448HPC2
+ depends on MPC7448HPC2 || PPC_HOLLY
+ select MPIC
+ select MPIC_WEIRD
default y
config MPC10X_BRIDGE
#
obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o
+obj-$(CONFIG_PPC_HOLLY) += holly.o
--- /dev/null
+/*
+ * Board setup routines for the IBM 750GX/CL platform w/ TSI10x bridge
+ *
+ * Copyright 2007 IBM Corporation
+ *
+ * Stephen Winiecki <stevewin@us.ibm.com>
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Based on code from mpc7448_hpc2.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/ide.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/tsi108.h>
+#include <asm/pci-bridge.h>
+#include <asm/reg.h>
+#include <mm/mmu_decl.h>
+#include <asm/tsi108_irq.h>
+#include <asm/tsi108_pci.h>
+#include <asm/mpic.h>
+#include <asm/of_platform.h>
+
+#undef DEBUG
+
+#define HOLLY_PCI_CFG_PHYS 0x7c000000
+
+int holly_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static void holly_remap_bridge(void)
+{
+ u32 lut_val, lut_addr;
+ int i;
+
+ printk(KERN_INFO "Remapping PCI bridge\n");
+
+ /* Re-init the PCI bridge and LUT registers to have mappings that don't
+ * rely on PIBS
+ */
+ lut_addr = 0x900;
+ for (i = 0; i < 31; i++) {
+ tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000201);
+ lut_addr += 4;
+ tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
+ lut_addr += 4;
+ }
+
+ /* Reserve the last LUT entry for PCI I/O space */
+ tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000241);
+ lut_addr += 4;
+ tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
+
+ /* Map PCI I/O space */
+ tsi108_write_reg(TSI108_PCI_PFAB_IO_UPPER, 0x0);
+ tsi108_write_reg(TSI108_PCI_PFAB_IO, 0x1);
+
+ /* Map PCI CFG space */
+ tsi108_write_reg(TSI108_PCI_PFAB_BAR0_UPPER, 0x0);
+ tsi108_write_reg(TSI108_PCI_PFAB_BAR0, 0x7c000000 | 0x01);
+
+ /* We don't need MEM32 and PRM remapping so disable them */
+ tsi108_write_reg(TSI108_PCI_PFAB_MEM32, 0x0);
+ tsi108_write_reg(TSI108_PCI_PFAB_PFM3, 0x0);
+ tsi108_write_reg(TSI108_PCI_PFAB_PFM4, 0x0);
+
+ /* Set P2O_BAR0 */
+ tsi108_write_reg(TSI108_PCI_P2O_BAR0_UPPER, 0x0);
+ tsi108_write_reg(TSI108_PCI_P2O_BAR0, 0xc0000000);
+
+ /* Init the PCI LUTs to do no remapping */
+ lut_addr = 0x500;
+ lut_val = 0x00000002;
+
+ for (i = 0; i < 32; i++) {
+ tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, lut_val);
+ lut_addr += 4;
+ tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, 0x40000000);
+ lut_addr += 4;
+ lut_val += 0x02000000;
+ }
+ tsi108_write_reg(TSI108_PCI_P2O_PAGE_SIZES, 0x00007900);
+
+ /* Set 64-bit PCI bus address for system memory */
+ tsi108_write_reg(TSI108_PCI_P2O_BAR2_UPPER, 0x0);
+ tsi108_write_reg(TSI108_PCI_P2O_BAR2, 0x0);
+}
+
+static void __init holly_setup_arch(void)
+{
+ struct device_node *cpu;
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("holly_setup_arch():set_bridge", 0);
+
+ cpu = of_find_node_by_type(NULL, "cpu");
+ if (cpu) {
+ const unsigned int *fp;
+
+ fp = of_get_property(cpu, "clock-frequency", NULL);
+ if (fp)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(cpu);
+ }
+ tsi108_csr_vir_base = get_vir_csrbase();
+
+ /* setup PCI host bridge */
+ holly_remap_bridge();
+
+ np = of_find_node_by_type(NULL, "pci");
+ if (np)
+ tsi108_setup_pci(np, HOLLY_PCI_CFG_PHYS, 1);
+
+ ppc_md.pci_exclude_device = holly_exclude_device;
+ if (ppc_md.progress)
+ ppc_md.progress("tsi108: resources set", 0x100);
+
+ printk(KERN_INFO "PPC750GX/CL Platform\n");
+}
+
+/*
+ * Interrupt setup and service. Interrrupts on the holly come
+ * from the four external INT pins, PCI interrupts are routed via
+ * PCI interrupt control registers, it generates internal IRQ23
+ *
+ * Interrupt routing on the Holly Board:
+ * TSI108:PB_INT[0] -> CPU0:INT#
+ * TSI108:PB_INT[1] -> CPU0:MCP#
+ * TSI108:PB_INT[2] -> N/C
+ * TSI108:PB_INT[3] -> N/C
+ */
+static void __init holly_init_IRQ(void)
+{
+ struct mpic *mpic;
+ phys_addr_t mpic_paddr = 0;
+ struct device_node *tsi_pic;
+#ifdef CONFIG_PCI
+ unsigned int cascade_pci_irq;
+ struct device_node *tsi_pci;
+ struct device_node *cascade_node = NULL;
+#endif
+
+ tsi_pic = of_find_node_by_type(NULL, "open-pic");
+ if (tsi_pic) {
+ unsigned int size;
+ const void *prop = of_get_property(tsi_pic, "reg", &size);
+ mpic_paddr = of_translate_address(tsi_pic, prop);
+ }
+
+ if (mpic_paddr == 0) {
+ printk(KERN_ERR "%s: No tsi108 PIC found !\n", __func__);
+ return;
+ }
+
+ pr_debug("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr);
+
+ mpic = mpic_alloc(tsi_pic, mpic_paddr,
+ MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+ MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
+ 24,
+ NR_IRQS-4, /* num_sources used */
+ "Tsi108_PIC");
+
+ BUG_ON(mpic == NULL);
+
+ mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+
+ mpic_init(mpic);
+
+#ifdef CONFIG_PCI
+ tsi_pci = of_find_node_by_type(NULL, "pci");
+ if (tsi_pci == NULL) {
+ printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__);
+ return;
+ }
+
+ cascade_node = of_find_node_by_type(NULL, "pic-router");
+ if (cascade_node == NULL) {
+ printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__);
+ return;
+ }
+
+ cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
+ pr_debug("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq);
+ tsi108_pci_int_init(cascade_node);
+ set_irq_data(cascade_pci_irq, mpic);
+ set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
+#endif
+ /* Configure MPIC outputs to CPU0 */
+ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
+ of_node_put(tsi_pic);
+}
+
+void holly_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "vendor\t\t: IBM\n");
+ seq_printf(m, "machine\t\t: PPC750 GX/CL\n");
+}
+
+void holly_restart(char *cmd)
+{
+ __be32 __iomem *ocn_bar1 = NULL;
+ unsigned long bar;
+ struct device_node *bridge = NULL;
+ const void *prop;
+ int size;
+ phys_addr_t addr = 0xc0000000;
+
+ local_irq_disable();
+
+ bridge = of_find_node_by_type(NULL, "tsi-bridge");
+ if (bridge) {
+ prop = of_get_property(bridge, "reg", &size);
+ addr = of_translate_address(bridge, prop);
+ }
+ addr += (TSI108_PB_OFFSET + 0x414);
+
+ ocn_bar1 = ioremap(addr, 0x4);
+
+ /* Turn on the BOOT bit so the addresses are correctly
+ * routed to the HLP interface */
+ bar = ioread32be(ocn_bar1);
+ bar |= 2;
+ iowrite32be(bar, ocn_bar1);
+ iosync();
+
+ /* Set SRR0 to the reset vector and turn on MSR_IP */
+ mtspr(SPRN_SRR0, 0xfff00100);
+ mtspr(SPRN_SRR1, MSR_IP);
+
+ /* Do an rfi to jump back to firmware. Somewhat evil,
+ * but it works
+ */
+ __asm__ __volatile__("rfi" : : : "memory");
+
+ /* Spin until reset happens. Shouldn't really get here */
+ for (;;) ;
+}
+
+void holly_power_off(void)
+{
+ local_irq_disable();
+ /* No way to shut power off with software */
+ for (;;) ;
+}
+
+void holly_halt(void)
+{
+ holly_power_off();
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init holly_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ibm,holly"))
+ return 0;
+ return 1;
+}
+
+static int ppc750_machine_check_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *entry;
+
+ /* Are we prepared to handle this fault */
+ if ((entry = search_exception_tables(regs->nip)) != NULL) {
+ tsi108_clear_pci_cfg_error();
+ regs->msr |= MSR_RI;
+ regs->nip = entry->fixup;
+ return 1;
+ }
+ return 0;
+}
+
+define_machine(holly){
+ .name = "PPC750 GX/CL TSI",
+ .probe = holly_probe,
+ .setup_arch = holly_setup_arch,
+ .init_IRQ = holly_init_IRQ,
+ .show_cpuinfo = holly_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = holly_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .machine_check_exception = ppc750_machine_check_exception,
+ .progress = udbg_progress,
+};
#include <asm/reg.h>
#include <mm/mmu_decl.h>
#include "mpc7448_hpc2.h"
+#include <asm/tsi108_pci.h>
#include <asm/tsi108_irq.h>
#include <asm/mpic.h>
#define DBG(fmt...) do { } while(0)
#endif
+#define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000
+
#ifndef CONFIG_PCI
isa_io_base = MPC7448_HPC2_ISA_IO_BASE;
isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE;
pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
#endif
-extern int tsi108_setup_pci(struct device_node *dev);
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
-extern void tsi108_pci_int_init(struct device_node *node);
-extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
{
static void __init mpc7448_hpc2_setup_arch(void)
{
- struct device_node *cpu;
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0);
- cpu = of_find_node_by_type(NULL, "cpu");
- if (cpu != 0) {
- const unsigned int *fp;
-
- fp = of_get_property(cpu, "clock-frequency", NULL);
- if (fp != 0)
- loops_per_jiffy = *fp / HZ;
- else
- loops_per_jiffy = 50000000 / HZ;
- of_node_put(cpu);
- }
tsi108_csr_vir_base = get_vir_csrbase();
/* setup PCI host bridge */
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
- tsi108_setup_pci(np);
+ tsi108_setup_pci(np, MPC7448HPC2_PCI_CFG_PHYS, 0);
ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device;
if (ppc_md.progress)
static int mpc7448_machine_check_exception(struct pt_regs *regs)
{
- extern void tsi108_clear_pci_cfg_error(void);
const struct exception_table_entry *entry;
/* Are we prepared to handle this fault */
hose->last_busno = bus_range ? bus_range[1] : 0xff;
disp_name = NULL;
- if (device_is_compatible(dev, "u3-agp")) {
+ if (of_device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
- } else if (device_is_compatible(dev, "u3-ht")) {
+ } else if (of_device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
- } else if (device_is_compatible(dev, "u4-pcie")) {
+ } else if (of_device_is_compatible(dev, "u4-pcie")) {
setup_u4_pcie(hose);
disp_name = "U4-PCIE";
primary = 0;
continue;
if (strcmp(np->type, "pci") && strcmp(np->type, "ht"))
continue;
- if ((device_is_compatible(np, "u4-pcie") ||
- device_is_compatible(np, "u3-agp")) &&
+ if ((of_device_is_compatible(np, "u4-pcie") ||
+ of_device_is_compatible(np, "u3-agp")) &&
add_bridge(np) == 0)
of_node_get(np);
- if (device_is_compatible(np, "u3-ht")) {
+ if (of_device_is_compatible(np, "u3-ht")) {
of_node_get(np);
ht = np;
}
*/
for_each_node_by_type(np, "interrupt-controller")
- if (device_is_compatible(np, "open-pic")) {
+ if (of_device_is_compatible(np, "open-pic")) {
mpic_node = np;
break;
}
#include <asm/hw_irq.h>
#include <asm/io.h>
#include <asm/prom.h>
+#include <asm/time.h>
#define SDCASR_REG 0x0100
#define SDCASR_REG_STRIDE 0x1000
policy->cur = pas_freqs[cur_astate].frequency;
policy->cpus = cpu_online_map;
+ ppc_proc_freq = policy->cur * 1000ul;
+
cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu);
/* this ensures that policy->cpuinfo_min and policy->cpuinfo_max
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
mutex_unlock(&pas_switch_mutex);
+ ppc_proc_freq = freqs.new * 1000ul;
return 0;
}
mpic_node = NULL;
for_each_node_by_type(np, "interrupt-controller")
- if (device_is_compatible(np, "open-pic")) {
+ if (of_device_is_compatible(np, "open-pic")) {
mpic_node = np;
break;
}
static int __init pasemi_publish_devices(void)
{
- /* Publish OF platform devices for southbridge IOs */
+ if (!machine_is(pasemi))
+ return 0;
+
+ /* Publish OF platform devices for SDC and other non-PCI devices */
of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
return 0;
static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- if (policy->cpu != 0)
- return -ENODEV;
-
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
- policy->cpus = cpu_possible_map;
+ /* secondary CPUs are tied to the primary one by the
+ * cpufreq core if in the secondary policy we tell it that
+ * it actually must be one policy together with all others. */
+ policy->cpus = cpu_online_map;
cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
return cpufreq_frequency_table_cpuinfo(policy,
phy = of_get_next_child(node, NULL);
if (!phy)
return -ENODEV;
- need_reset = device_is_compatible(phy, "B5221");
+ need_reset = of_device_is_compatible(phy, "B5221");
of_node_put(phy);
if (!need_reset)
return 0;
for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) {
if (!compat)
break;
- if (device_is_compatible(node, compat))
+ if (of_device_is_compatible(node, compat))
break;
}
if (!node)
conn = of_get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
port_type = PMAC_SCC_IRDA;
- else if (device_is_compatible(np, "cobalt"))
+ else if (of_device_is_compatible(np, "cobalt"))
modem = 1;
else if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
*/
np = of_find_node_by_name(NULL, "ethernet");
while(np) {
- if (device_is_compatible(np, "K2-GMAC"))
+ if (of_device_is_compatible(np, "K2-GMAC"))
g5_gmac_enable(np, 0, 1);
np = of_find_node_by_name(np, "ethernet");
}
*/
np = of_find_node_by_name(NULL, "firewire");
while(np) {
- if (device_is_compatible(np, "pci106b,5811")) {
+ if (of_device_is_compatible(np, "pci106b,5811")) {
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
g5_fw_enable(np, 0, 1);
}
np = of_find_node_by_name(NULL, "ethernet");
while(np) {
if (np->parent
- && device_is_compatible(np->parent, "uni-north")
- && device_is_compatible(np, "gmac"))
+ && of_device_is_compatible(np->parent, "uni-north")
+ && of_device_is_compatible(np, "gmac"))
core99_gmac_enable(np, 0, 1);
np = of_find_node_by_name(np, "ethernet");
}
np = of_find_node_by_name(NULL, "firewire");
while(np) {
if (np->parent
- && device_is_compatible(np->parent, "uni-north")
- && (device_is_compatible(np, "pci106b,18") ||
- device_is_compatible(np, "pci106b,30") ||
- device_is_compatible(np, "pci11c1,5811"))) {
+ && of_device_is_compatible(np->parent, "uni-north")
+ && (of_device_is_compatible(np, "pci106b,18") ||
+ of_device_is_compatible(np, "pci106b,30") ||
+ of_device_is_compatible(np, "pci11c1,5811"))) {
macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
core99_firewire_enable(np, 0, 1);
}
np = of_find_node_by_name(NULL, "ata-6");
while(np) {
if (np->parent
- && device_is_compatible(np->parent, "uni-north")
- && device_is_compatible(np, "kauai-ata")) {
+ && of_device_is_compatible(np->parent, "uni-north")
+ && of_device_is_compatible(np, "kauai-ata")) {
core99_ata100_enable(np, 1);
}
np = of_find_node_by_name(np, "ata-6");
if (strcmp(np->name, p->name))
continue;
if (p->compatible &&
- !device_is_compatible(np, p->compatible))
+ !of_device_is_compatible(np, p->compatible))
continue;
if (p->quirks & pmac_i2c_quirk_skip)
break;
* identify the chip using flash id commands and base ourselves on
* a list of known chips IDs
*/
- if (device_is_compatible(dp, "amd-0137")) {
+ if (of_device_is_compatible(dp, "amd-0137")) {
core99_erase_bank = amd_erase_bank;
core99_write_bank = amd_write_bank;
} else {
}
}
- is_core_99 = device_is_compatible(dp, "nvram,flash");
+ is_core_99 = of_device_is_compatible(dp, "nvram,flash");
if (is_core_99) {
err = core99_nvram_setup(dp, r1.start);
goto bail;
/* 64 bits only bridges */
#ifdef CONFIG_PPC64
- if (device_is_compatible(dev, "u3-agp")) {
+ if (of_device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
- } else if (device_is_compatible(dev, "u3-ht")) {
+ } else if (of_device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
- } else if (device_is_compatible(dev, "u4-pcie")) {
+ } else if (of_device_is_compatible(dev, "u4-pcie")) {
setup_u4_pcie(hose);
disp_name = "U4-PCIE";
primary = 0;
/* 32 bits only bridges */
#ifdef CONFIG_PPC32
- if (device_is_compatible(dev, "uni-north")) {
+ if (of_device_is_compatible(dev, "uni-north")) {
primary = setup_uninorth(hose, &rsrc);
disp_name = "UniNorth";
} else if (strcmp(dev->name, "pci") == 0) {
return 0;
uninorth_child = node->parent &&
- device_is_compatible(node->parent, "uni-north");
+ of_device_is_compatible(node->parent, "uni-north");
/* Firewire & GMAC were disabled after PCI probe, the driver is
* claiming them, we must re-enable them now.
*/
if (uninorth_child && !strcmp(node->name, "firewire") &&
- (device_is_compatible(node, "pci106b,18") ||
- device_is_compatible(node, "pci106b,30") ||
- device_is_compatible(node, "pci11c1,5811"))) {
+ (of_device_is_compatible(node, "pci106b,18") ||
+ of_device_is_compatible(node, "pci106b,30") ||
+ of_device_is_compatible(node, "pci11c1,5811"))) {
pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1);
pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1);
updatecfg = 1;
}
if (uninorth_child && !strcmp(node->name, "ethernet") &&
- device_is_compatible(node, "gmac")) {
+ of_device_is_compatible(node, "gmac")) {
pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1);
updatecfg = 1;
}
#endif /* CONFIG_BLK_DEV_IDE */
for_each_node_by_name(nd, "firewire") {
- if (nd->parent && (device_is_compatible(nd, "pci106b,18") ||
- device_is_compatible(nd, "pci106b,30") ||
- device_is_compatible(nd, "pci11c1,5811"))
- && device_is_compatible(nd->parent, "uni-north")) {
+ if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") ||
+ of_device_is_compatible(nd, "pci106b,30") ||
+ of_device_is_compatible(nd, "pci11c1,5811"))
+ && of_device_is_compatible(nd->parent, "uni-north")) {
pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0);
pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0);
}
}
of_node_put(nd);
for_each_node_by_name(nd, "ethernet") {
- if (nd->parent && device_is_compatible(nd, "gmac")
- && device_is_compatible(nd->parent, "uni-north"))
+ if (nd->parent && of_device_is_compatible(nd, "gmac")
+ && of_device_is_compatible(nd->parent, "uni-north"))
pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0);
}
of_node_put(nd);
slave = of_find_node_by_name(master, "mac-io");
/* Check ordering of master & slave */
- if (device_is_compatible(master, "gatwick")) {
+ if (of_device_is_compatible(master, "gatwick")) {
struct device_node *tmp;
BUG_ON(slave == NULL);
tmp = master;
#endif
}
-/* TODO: Merge the suspend-to-ram with the common code !!!
- * currently, this is a stub implementation for suspend-to-disk
- * only
- */
-
-#ifdef CONFIG_SOFTWARE_SUSPEND
-
-static int pmac_pm_prepare(suspend_state_t state)
-{
- printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
-
- return 0;
-}
-
-static int pmac_pm_enter(suspend_state_t state)
-{
- printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
-
- /* Giveup the lazy FPU & vec so we don't have to back them
- * up from the low level code
- */
- enable_kernel_fp();
-
-#ifdef CONFIG_ALTIVEC
- if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC)
- enable_kernel_altivec();
-#endif /* CONFIG_ALTIVEC */
-
- return 0;
-}
-
-static int pmac_pm_finish(suspend_state_t state)
-{
- printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
-
- /* Restore userland MMU context */
- set_context(current->active_mm->context.id, current->active_mm->pgd);
-
- return 0;
-}
-
-static int pmac_pm_valid(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_DISK:
- return 1;
- /* can't do any other states via generic mechanism yet */
- default:
- return 0;
- }
-}
-
-static struct pm_ops pmac_pm_ops = {
- .pm_disk_mode = PM_DISK_SHUTDOWN,
- .prepare = pmac_pm_prepare,
- .enter = pmac_pm_enter,
- .finish = pmac_pm_finish,
- .valid = pmac_pm_valid,
-};
-
-#endif /* CONFIG_SOFTWARE_SUSPEND */
-
static int initializing = 1;
static int pmac_late_init(void)
{
initializing = 0;
-#ifdef CONFIG_SOFTWARE_SUSPEND
- pm_set_ops(&pmac_pm_ops);
-#endif /* CONFIG_SOFTWARE_SUSPEND */
+ /* this is udbg (which is __init) and we can later use it during
+ * cpu hotplug (in smp_core99_kick_cpu) */
+ ppc_md.progress = NULL;
return 0;
}
/* We need to use normal PCI probing for the AGP bus,
* since the device for the AGP bridge isn't in the tree.
*/
- if (bus->self == NULL && (device_is_compatible(node, "u3-agp") ||
- device_is_compatible(node, "u4-pcie")))
+ if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") ||
+ of_device_is_compatible(node, "u4-pcie")))
return PCI_PROBE_NORMAL;
return PCI_PROBE_DEVTREE;
}
-#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+/* access per cpu vars from generic smp.c */
+DECLARE_PER_CPU(int, cpu_state);
+
+static void pmac_cpu_die(void)
+{
+ /*
+ * turn off as much as possible, we'll be
+ * kicked out as this will only be invoked
+ * on core99 platforms for now ...
+ */
+
+ printk(KERN_INFO "CPU#%d offline\n", smp_processor_id());
+ __get_cpu_var(cpu_state) = CPU_DEAD;
+ smp_wmb();
+
+ /*
+ * during the path that leads here preemption is disabled,
+ * reenable it now so that when coming up preempt count is
+ * zero correctly
+ */
+ preempt_enable();
+
+ /*
+ * hard-disable interrupts for the non-NAP case, the NAP code
+ * needs to re-enable interrupts (but soft-disables them)
+ */
+ hard_irq_disable();
+
+ while (1) {
+ /* let's not take timer interrupts too often ... */
+ set_dec(0x7fffffff);
+
+ /* should always be true at this point */
+ if (cpu_has_feature(CPU_FTR_CAN_NAP))
+ power4_cpu_offline_powersave();
+ else {
+ HMT_low();
+ HMT_very_low();
+ }
+ }
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
+#endif /* CONFIG_PPC64 */
define_machine(powermac) {
.name = "PowerMac",
.phys_mem_access_prot = pci_phys_mem_access_prot,
#endif
#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
- .cpu_die = generic_mach_cpu_die,
+ .cpu_die = pmac_cpu_die,
#endif
};
/* Look for the clock chip */
while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) {
p = of_get_parent(cc);
- ok = p && device_is_compatible(p, "uni-n-i2c");
+ ok = p && of_device_is_compatible(p, "uni-n-i2c");
of_node_put(p);
if (!ok)
continue;
continue;
switch (*reg) {
case 0xd2:
- if (device_is_compatible(cc,"pulsar-legacy-slewing")) {
+ if (of_device_is_compatible(cc,"pulsar-legacy-slewing")) {
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
pmac_tb_pulsar_addr = 0xd2;
name = "Pulsar";
- } else if (device_is_compatible(cc, "cy28508")) {
+ } else if (of_device_is_compatible(cc, "cy28508")) {
pmac_tb_freeze = smp_core99_cypress_tb_freeze;
name = "Cypress";
}
cpu_dead[cpu] = 0;
}
-#endif
+#endif /* CONFIG_HOTPLUG_CPU && CONFIG_PP32 */
/* Core99 Macs (dual G4s and G5s) */
struct smp_ops_t core99_smp_ops = {
.setup_cpu = smp_core99_setup_cpu,
.give_timebase = smp_core99_give_timebase,
.take_timebase = smp_core99_take_timebase,
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
+#if defined(CONFIG_HOTPLUG_CPU)
+# if defined(CONFIG_PPC32)
.cpu_disable = smp_core99_cpu_disable,
.cpu_die = smp_core99_cpu_die,
+# endif
+# if defined(CONFIG_PPC64)
+ .cpu_disable = generic_cpu_disable,
+ .cpu_die = generic_cpu_die,
+ /* intentionally do *NOT* assign cpu_enable,
+ * the generic code will use kick_cpu then! */
+# endif
#endif
};
result = lv1_map_htab(0, &htab_addr);
- htab = (hpte_t *)__ioremap(htab_addr, htab_size, PAGE_READONLY_X);
+ htab = (hpte_t *)__ioremap(htab_addr, htab_size,
+ pgprot_val(PAGE_READONLY_X));
DBG("%s:%d: lpar %016lxh, virt %016lxh\n", __func__, __LINE__,
htab_addr, (unsigned long)htab);
static DEFINE_PER_CPU(struct ps3_private, ps3_private);
-int ps3_alloc_irq(enum ps3_cpu_binding cpu, unsigned long outlet,
+/**
+ * ps3_virq_setup - virq related setup.
+ * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
+ * serviced on.
+ * @outlet: The HV outlet from the various create outlet routines.
+ * @virq: The assigned Linux virq.
+ *
+ * Calls irq_create_mapping() to get a virq and sets the chip data to
+ * ps3_private data.
+ */
+
+int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
unsigned int *virq)
{
int result;
goto fail_create;
}
- /* Binds outlet to cpu + virq. */
-
- result = lv1_connect_irq_plug_ext(pd->node, pd->cpu, *virq, outlet, 0);
-
- if (result) {
- pr_info("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
- __func__, __LINE__, ps3_result(result));
- result = -EPERM;
- goto fail_connect;
- }
-
pr_debug("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
outlet, cpu, *virq);
return result;
fail_set:
- lv1_disconnect_irq_plug_ext(pd->node, pd->cpu, *virq);
-fail_connect:
irq_dispose_mapping(*virq);
fail_create:
return result;
}
-EXPORT_SYMBOL_GPL(ps3_alloc_irq);
-int ps3_free_irq(unsigned int virq)
+/**
+ * ps3_virq_destroy - virq related teardown.
+ * @virq: The assigned Linux virq.
+ *
+ * Clears chip data and calls irq_dispose_mapping() for the virq.
+ */
+
+int ps3_virq_destroy(unsigned int virq)
{
- int result;
const struct ps3_private *pd = get_irq_chip_data(virq);
pr_debug("%s:%d: node %lu, cpu %d, virq %u\n", __func__, __LINE__,
pd->node, pd->cpu, virq);
- result = lv1_disconnect_irq_plug_ext(pd->node, pd->cpu, virq);
-
- if (result)
- pr_info("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
- __func__, __LINE__, ps3_result(result));
-
set_irq_chip_data(virq, NULL);
irq_dispose_mapping(virq);
- return result;
+
+ pr_debug("%s:%d <-\n", __func__, __LINE__);
+ return 0;
}
-EXPORT_SYMBOL_GPL(ps3_free_irq);
/**
- * ps3_alloc_io_irq - Assign a virq to a system bus device.
+ * ps3_irq_plug_setup - Generic outlet and virq related setup.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
- * @interrupt_id: The device interrupt id read from the system repository.
+ * @outlet: The HV outlet from the various create outlet routines.
* @virq: The assigned Linux virq.
*
- * An io irq represents a non-virtualized device interrupt. interrupt_id
- * coresponds to the interrupt number of the interrupt controller.
+ * Sets up virq and connects the irq plug.
*/
-int ps3_alloc_io_irq(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
+int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
unsigned int *virq)
{
int result;
- unsigned long outlet;
+ struct ps3_private *pd;
- result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
+ result = ps3_virq_setup(cpu, outlet, virq);
if (result) {
- pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
- __func__, __LINE__, ps3_result(result));
- return result;
+ pr_debug("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
+ goto fail_setup;
}
- result = ps3_alloc_irq(cpu, outlet, virq);
- BUG_ON(result);
+ pd = get_irq_chip_data(*virq);
+
+ /* Binds outlet to cpu + virq. */
+
+ result = lv1_connect_irq_plug_ext(pd->node, pd->cpu, *virq, outlet, 0);
+ if (result) {
+ pr_info("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ result = -EPERM;
+ goto fail_connect;
+ }
+
+ return result;
+
+fail_connect:
+ ps3_virq_destroy(*virq);
+fail_setup:
return result;
}
-EXPORT_SYMBOL_GPL(ps3_alloc_io_irq);
+EXPORT_SYMBOL_GPL(ps3_irq_plug_setup);
+
+/**
+ * ps3_irq_plug_destroy - Generic outlet and virq related teardown.
+ * @virq: The assigned Linux virq.
+ *
+ * Disconnects the irq plug and tears down virq.
+ * Do not call for system bus event interrupts setup with
+ * ps3_sb_event_receive_port_setup().
+ */
-int ps3_free_io_irq(unsigned int virq)
+int ps3_irq_plug_destroy(unsigned int virq)
{
int result;
+ const struct ps3_private *pd = get_irq_chip_data(virq);
- result = lv1_destruct_io_irq_outlet(virq_to_hw(virq));
+ pr_debug("%s:%d: node %lu, cpu %d, virq %u\n", __func__, __LINE__,
+ pd->node, pd->cpu, virq);
+
+ result = lv1_disconnect_irq_plug_ext(pd->node, pd->cpu, virq);
if (result)
- pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
- __func__, __LINE__, ps3_result(result));
+ pr_info("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
- ps3_free_irq(virq);
+ ps3_virq_destroy(virq);
return result;
}
-EXPORT_SYMBOL_GPL(ps3_free_io_irq);
+EXPORT_SYMBOL_GPL(ps3_irq_plug_destroy);
/**
- * ps3_alloc_event_irq - Allocate a virq for use with a system event.
+ * ps3_event_receive_port_setup - Setup an event receive port.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @virq: The assigned Linux virq.
*
* The virq can be used with lv1_connect_interrupt_event_receive_port() to
- * arrange to receive events, or with ps3_send_event_locally() to signal
- * events.
+ * arrange to receive interrupts from system-bus devices, or with
+ * ps3_send_event_locally() to signal events.
*/
-int ps3_alloc_event_irq(enum ps3_cpu_binding cpu, unsigned int *virq)
+int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq)
{
int result;
unsigned long outlet;
return result;
}
- result = ps3_alloc_irq(cpu, outlet, virq);
+ result = ps3_irq_plug_setup(cpu, outlet, virq);
BUG_ON(result);
return result;
}
+EXPORT_SYMBOL_GPL(ps3_event_receive_port_setup);
+
+/**
+ * ps3_event_receive_port_destroy - Destroy an event receive port.
+ * @virq: The assigned Linux virq.
+ *
+ * Since ps3_event_receive_port_destroy destroys the receive port outlet,
+ * SB devices need to call disconnect_interrupt_event_receive_port() before
+ * this.
+ */
-int ps3_free_event_irq(unsigned int virq)
+int ps3_event_receive_port_destroy(unsigned int virq)
{
int result;
- pr_debug(" -> %s:%d\n", __func__, __LINE__);
+ pr_debug(" -> %s:%d virq: %u\n", __func__, __LINE__, virq);
result = lv1_destruct_event_receive_port(virq_to_hw(virq));
pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
__func__, __LINE__, ps3_result(result));
- ps3_free_irq(virq);
+ /* lv1_destruct_event_receive_port() destroys the IRQ plug,
+ * so don't call ps3_irq_plug_destroy() here.
+ */
+
+ result = ps3_virq_destroy(virq);
+ BUG_ON(result);
pr_debug(" <- %s:%d\n", __func__, __LINE__);
return result;
}
+EXPORT_SYMBOL_GPL(ps3_event_receive_port_destroy);
int ps3_send_event_locally(unsigned int virq)
{
}
/**
- * ps3_connect_event_irq - Assign a virq to a system bus device.
+ * ps3_sb_event_receive_port_setup - Setup a system bus event receive port.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @did: The HV device identifier read from the system repository.
* coresponds to the software interrupt number.
*/
-int ps3_connect_event_irq(enum ps3_cpu_binding cpu,
+int ps3_sb_event_receive_port_setup(enum ps3_cpu_binding cpu,
const struct ps3_device_id *did, unsigned int interrupt_id,
unsigned int *virq)
{
+ /* this should go in system-bus.c */
+
int result;
- result = ps3_alloc_event_irq(cpu, virq);
+ result = ps3_event_receive_port_setup(cpu, virq);
if (result)
return result;
pr_debug("%s:%d: lv1_connect_interrupt_event_receive_port"
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
- ps3_free_event_irq(*virq);
+ ps3_event_receive_port_destroy(*virq);
*virq = NO_IRQ;
return result;
}
return 0;
}
+EXPORT_SYMBOL(ps3_sb_event_receive_port_setup);
-int ps3_disconnect_event_irq(const struct ps3_device_id *did,
+int ps3_sb_event_receive_port_destroy(const struct ps3_device_id *did,
unsigned int interrupt_id, unsigned int virq)
{
+ /* this should go in system-bus.c */
+
int result;
pr_debug(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
- ps3_free_event_irq(virq);
+ result = ps3_event_receive_port_destroy(virq);
+ BUG_ON(result);
pr_debug(" <- %s:%d\n", __func__, __LINE__);
return result;
}
+EXPORT_SYMBOL(ps3_sb_event_receive_port_destroy);
/**
- * ps3_alloc_vuart_irq - Configure the system virtual uart virq.
+ * ps3_io_irq_setup - Setup a system bus io irq.
+ * @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
+ * serviced on.
+ * @interrupt_id: The device interrupt id read from the system repository.
+ * @virq: The assigned Linux virq.
+ *
+ * An io irq represents a non-virtualized device interrupt. interrupt_id
+ * coresponds to the interrupt number of the interrupt controller.
+ */
+
+int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
+ unsigned int *virq)
+{
+ int result;
+ unsigned long outlet;
+
+ result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
+
+ if (result) {
+ pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+ return result;
+ }
+
+ result = ps3_irq_plug_setup(cpu, outlet, virq);
+ BUG_ON(result);
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(ps3_io_irq_setup);
+
+int ps3_io_irq_destroy(unsigned int virq)
+{
+ int result;
+
+ result = lv1_destruct_io_irq_outlet(virq_to_hw(virq));
+
+ if (result)
+ pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
+ __func__, __LINE__, ps3_result(result));
+
+ result = ps3_irq_plug_destroy(virq);
+ BUG_ON(result);
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(ps3_io_irq_destroy);
+
+/**
+ * ps3_vuart_irq_setup - Setup the system virtual uart virq.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @virt_addr_bmp: The caller supplied virtual uart interrupt bitmap.
* freeing the interrupt will return a wrong state error.
*/
-int ps3_alloc_vuart_irq(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
+int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
unsigned int *virq)
{
int result;
return result;
}
- result = ps3_alloc_irq(cpu, outlet, virq);
+ result = ps3_irq_plug_setup(cpu, outlet, virq);
BUG_ON(result);
return result;
}
-int ps3_free_vuart_irq(unsigned int virq)
+int ps3_vuart_irq_destroy(unsigned int virq)
{
int result;
return result;
}
- ps3_free_irq(virq);
+ result = ps3_irq_plug_destroy(virq);
+ BUG_ON(result);
return result;
}
/**
- * ps3_alloc_spe_irq - Configure an spe virq.
+ * ps3_spe_irq_setup - Setup an spe virq.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @spe_id: The spe_id returned from lv1_construct_logical_spe().
*
*/
-int ps3_alloc_spe_irq(enum ps3_cpu_binding cpu, unsigned long spe_id,
+int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
unsigned int class, unsigned int *virq)
{
int result;
return result;
}
- result = ps3_alloc_irq(cpu, outlet, virq);
+ result = ps3_irq_plug_setup(cpu, outlet, virq);
BUG_ON(result);
return result;
}
-int ps3_free_spe_irq(unsigned int virq)
+int ps3_spe_irq_destroy(unsigned int virq)
{
- ps3_free_irq(virq);
+ int result = ps3_irq_plug_destroy(virq);
+ BUG_ON(result);
return 0;
}
void ps3_mm_shutdown(void)
{
ps3_mm_region_destroy(&map.r1);
- map.total = map.rm.size;
}
#define prealloc_ps3fb_videomemory() do { } while (0)
#endif
+static int ps3_set_dabr(u64 dabr)
+{
+ enum {DABR_USER = 1, DABR_KERNEL = 2,};
+
+ return lv1_set_dabr(dabr, DABR_KERNEL | DABR_USER) ? -1 : 0;
+}
static void __init ps3_setup_arch(void)
{
.get_boot_time = ps3_get_boot_time,
.set_rtc_time = ps3_set_rtc_time,
.get_rtc_time = ps3_get_rtc_time,
+ .set_dabr = ps3_set_dabr,
.calibrate_decr = ps3_calibrate_decr,
.progress = ps3_progress,
.restart = ps3_restart,
BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3);
for (i = 0; i < MSG_COUNT; i++) {
- result = ps3_alloc_event_irq(cpu, &virqs[i]);
+ result = ps3_event_receive_port_setup(cpu, &virqs[i]);
if (result)
continue;
int i;
DBG(" -> %s:%d: (%d)\n", __func__, __LINE__, cpu);
+
for (i = 0; i < MSG_COUNT; i++) {
- ps3_free_event_irq(virqs[i]);
free_irq(virqs[i], (void*)(long)i);
+ ps3_event_receive_port_destroy(virqs[i]);
virqs[i] = NO_IRQ;
}
+
DBG(" <- %s:%d: (%d)\n", __func__, __LINE__, cpu);
}
spu_pdata(spu)->shadow = __ioremap(
spu_pdata(spu)->shadow_addr, sizeof(struct spe_shadow),
- PAGE_READONLY | _PAGE_NO_CACHE | _PAGE_GUARDED);
+ pgprot_val(PAGE_READONLY) | _PAGE_NO_CACHE | _PAGE_GUARDED);
if (!spu_pdata(spu)->shadow) {
pr_debug("%s:%d: ioremap shadow failed\n", __func__, __LINE__);
goto fail_ioremap;
{
int result;
- result = ps3_alloc_spe_irq(PS3_BINDING_CPU_ANY, spu_pdata(spu)->spe_id,
+ result = ps3_spe_irq_setup(PS3_BINDING_CPU_ANY, spu_pdata(spu)->spe_id,
0, &spu->irqs[0]);
if (result)
goto fail_alloc_0;
- result = ps3_alloc_spe_irq(PS3_BINDING_CPU_ANY, spu_pdata(spu)->spe_id,
+ result = ps3_spe_irq_setup(PS3_BINDING_CPU_ANY, spu_pdata(spu)->spe_id,
1, &spu->irqs[1]);
if (result)
goto fail_alloc_1;
- result = ps3_alloc_spe_irq(PS3_BINDING_CPU_ANY, spu_pdata(spu)->spe_id,
+ result = ps3_spe_irq_setup(PS3_BINDING_CPU_ANY, spu_pdata(spu)->spe_id,
2, &spu->irqs[2]);
if (result)
return result;
fail_alloc_2:
- ps3_free_spe_irq(spu->irqs[1]);
+ ps3_spe_irq_destroy(spu->irqs[1]);
fail_alloc_1:
- ps3_free_spe_irq(spu->irqs[0]);
+ ps3_spe_irq_destroy(spu->irqs[0]);
fail_alloc_0:
spu->irqs[0] = spu->irqs[1] = spu->irqs[2] = NO_IRQ;
return result;
result = lv1_disable_logical_spe(spu_pdata(spu)->spe_id, 0);
BUG_ON(result);
- ps3_free_spe_irq(spu->irqs[2]);
- ps3_free_spe_irq(spu->irqs[1]);
- ps3_free_spe_irq(spu->irqs[0]);
+ ps3_spe_irq_destroy(spu->irqs[2]);
+ ps3_spe_irq_destroy(spu->irqs[1]);
+ ps3_spe_irq_destroy(spu->irqs[0]);
spu->irqs[0] = spu->irqs[1] = spu->irqs[2] = NO_IRQ;
break;
}
+ if (!pdn || !PCI_DN(pdn)) {
+ printk(KERN_WARNING "pci_dma_dev_setup_pSeriesLP: "
+ "no DMA window found for pci dev=%s dn=%s\n",
+ pci_name(dev), dn? dn->full_name : "<null>");
+ return;
+ }
DBG(" parent is %s\n", pdn->full_name);
/* Check for parent == NULL so we don't try to setup the empty EADS
goto out;
vtermno = termno[0];
- if (device_is_compatible(stdout_node, "hvterm1")) {
+ if (of_device_is_compatible(stdout_node, "hvterm1")) {
udbg_putc = udbg_putcLP;
udbg_getc = udbg_getcLP;
udbg_getc_poll = udbg_getc_pollLP;
if (add_console)
add_preferred_console("hvc", termno[0] & 0xff, NULL);
- } else if (device_is_compatible(stdout_node, "hvterm-protocol")) {
+ } else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) {
vtermno = termno[0];
udbg_putc = udbg_hvsi_putc;
udbg_getc = udbg_hvsi_getc;
pci_remove_bus_device(dev);
}
}
+EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
/* Must be called before pci_bus_add_devices */
void
/* Look for cascade */
for_each_node_by_type(np, "interrupt-controller")
- if (device_is_compatible(np, "chrp,iic")) {
+ if (of_device_is_compatible(np, "chrp,iic")) {
cascade = np;
break;
}
* like vdevices, events, etc... The trick we use here is to match
* everything here except the legacy 8259 which is compatible "chrp,iic"
*/
- return !device_is_compatible(node, "chrp,iic");
+ return !of_device_is_compatible(node, "chrp,iic");
}
static int xics_host_map_direct(struct irq_host *h, unsigned int virq,
unsigned long intack = 0;
for_each_node_by_type(np, "interrupt-controller")
- if (device_is_compatible(np, "chrp,iic")) {
+ if (of_device_is_compatible(np, "chrp,iic")) {
found = np;
break;
}
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
+#include <linux/suspend.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/iommu.h>
/* Virtual base address of the DART table */
static u32 *dart_vbase;
+#ifdef CONFIG_PM
+static u32 *dart_copy;
+#endif
/* Mapped base address for the dart */
static unsigned int __iomem *dart;
set_pci_dma_ops(&dma_direct_ops);
}
+#ifdef CONFIG_PM
+static void iommu_dart_save(void)
+{
+ memcpy(dart_copy, dart_vbase, 2*1024*1024);
+}
+
+static void iommu_dart_restore(void)
+{
+ memcpy(dart_vbase, dart_copy, 2*1024*1024);
+ dart_tlb_invalidate_all();
+}
+
+static int __init iommu_init_late_dart(void)
+{
+ unsigned long tbasepfn;
+ struct page *p;
+
+ /* if no dart table exists then we won't need to save it
+ * and the area has also not been reserved */
+ if (!dart_tablebase)
+ return 0;
+
+ tbasepfn = __pa(dart_tablebase) >> PAGE_SHIFT;
+ register_nosave_region_late(tbasepfn,
+ tbasepfn + ((1<<24) >> PAGE_SHIFT));
+
+ /* For suspend we need to copy the dart contents because
+ * it is not part of the regular mapping (see above) and
+ * thus not saved automatically. The memory for this copy
+ * must be allocated early because we need 2 MB. */
+ p = alloc_pages(GFP_KERNEL, 21 - PAGE_SHIFT);
+ BUG_ON(!p);
+ dart_copy = page_address(p);
+
+ ppc_md.iommu_save = iommu_dart_save;
+ ppc_md.iommu_restore = iommu_dart_restore;
+
+ return 0;
+}
+
+late_initcall(iommu_init_late_dart);
+#endif
void __init alloc_dart_table(void)
{
tmp |= 0x22;
writel(tmp, fixup->base + 4);
spin_unlock_irqrestore(&mpic->fixup_lock, flags);
+
+#ifdef CONFIG_PM
+ /* use the lowest bit inverted to the actual HW,
+ * set if this fixup was enabled, clear otherwise */
+ mpic->save_data[source].fixup_data = tmp | 1;
+#endif
}
static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source,
tmp |= 1;
writel(tmp, fixup->base + 4);
spin_unlock_irqrestore(&mpic->fixup_lock, flags);
+
+#ifdef CONFIG_PM
+ /* use the lowest bit inverted to the actual HW,
+ * set if this fixup was enabled, clear otherwise */
+ mpic->save_data[source].fixup_data = tmp & ~1;
+#endif
}
static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase,
/* Do the HT PIC fixups on U3 broken mpic */
DBG("MPIC flags: %x\n", mpic->flags);
if ((mpic->flags & MPIC_U3_HT_IRQS) && (mpic->flags & MPIC_PRIMARY))
- mpic_scan_ht_pics(mpic);
+ mpic_scan_ht_pics(mpic);
for (i = 0; i < mpic->num_sources; i++) {
/* start with vector = source number, and masked */
/* Set current processor priority to 0 */
mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0);
+
+#ifdef CONFIG_PM
+ /* allocate memory to save mpic state */
+ mpic->save_data = alloc_bootmem(mpic->num_sources * sizeof(struct mpic_irq_save));
+ BUG_ON(mpic->save_data == NULL);
+#endif
}
void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio)
#ifdef DEBUG_LOW
DBG("%s: get_one_irq(): %d\n", mpic->name, src);
#endif
- if (unlikely(src == mpic->spurious_vec))
+ if (unlikely(src == mpic->spurious_vec)) {
+ if (mpic->flags & MPIC_SPV_EOI)
+ mpic_eoi(mpic);
return NO_IRQ;
+ }
return irq_linear_revmap(mpic->irqhost, src);
}
mpic_setup_this_cpu();
}
#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_PM
+static int mpic_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct mpic *mpic = container_of(dev, struct mpic, sysdev);
+ int i;
+
+ for (i = 0; i < mpic->num_sources; i++) {
+ mpic->save_data[i].vecprio =
+ mpic_irq_read(i, MPIC_INFO(IRQ_VECTOR_PRI));
+ mpic->save_data[i].dest =
+ mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION));
+ }
+
+ return 0;
+}
+
+static int mpic_resume(struct sys_device *dev)
+{
+ struct mpic *mpic = container_of(dev, struct mpic, sysdev);
+ int i;
+
+ for (i = 0; i < mpic->num_sources; i++) {
+ mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI),
+ mpic->save_data[i].vecprio);
+ mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
+ mpic->save_data[i].dest);
+
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+ {
+ struct mpic_irq_fixup *fixup = &mpic->fixups[i];
+
+ if (fixup->base) {
+ /* we use the lowest bit in an inverted meaning */
+ if ((mpic->save_data[i].fixup_data & 1) == 0)
+ continue;
+
+ /* Enable and configure */
+ writeb(0x10 + 2 * fixup->index, fixup->base + 2);
+
+ writel(mpic->save_data[i].fixup_data & ~1,
+ fixup->base + 4);
+ }
+ }
+#endif
+ } /* end for loop */
+
+ return 0;
+}
+#endif
+
+static struct sysdev_class mpic_sysclass = {
+#ifdef CONFIG_PM
+ .resume = mpic_resume,
+ .suspend = mpic_suspend,
+#endif
+ set_kset_name("mpic"),
+};
+
+static int mpic_init_sys(void)
+{
+ struct mpic *mpic = mpics;
+ int error, id = 0;
+
+ error = sysdev_class_register(&mpic_sysclass);
+
+ while (mpic && !error) {
+ mpic->sysdev.cls = &mpic_sysclass;
+ mpic->sysdev.id = id++;
+ error = sysdev_register(&mpic->sysdev);
+ mpic = mpic->next;
+ }
+ return error;
+}
+
+device_initcall(mpic_init_sys);
goto err;
}
- mac_addr = of_get_property(np, "address", NULL);
- memcpy(tsi_eth_data.mac_addr, mac_addr, 6);
+ mac_addr = of_get_mac_address(np);
+ if (mac_addr)
+ memcpy(tsi_eth_data.mac_addr, mac_addr, 6);
ph = of_get_property(np, "phy-handle", NULL);
phy = of_find_node_by_phandle(*ph);
tsi_eth_data.phyregs = res.start;
tsi_eth_data.phy = *phy_id;
tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0);
+ if (of_device_is_compatible(phy, "bcm54xx"))
+ tsi_eth_data.phy_type = TSI108_PHY_BCM54XX;
of_node_put(phy);
ret =
platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/tsi108.h>
+#include <asm/tsi108_pci.h>
#include <asm/tsi108_irq.h>
#include <asm/prom.h>
((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base)
u32 tsi108_pci_cfg_base;
+static u32 tsi108_pci_cfg_phys;
u32 tsi108_csr_vir_base;
static struct device_node *pci_irq_node;
static struct irq_host *pci_irq_host;
void tsi108_clear_pci_cfg_error(void)
{
- tsi108_clear_pci_error(TSI108_PCI_CFG_BASE_PHYS);
+ tsi108_clear_pci_error(tsi108_pci_cfg_phys);
}
static struct pci_ops tsi108_direct_pci_ops = {
tsi108_direct_write_config
};
-int __init tsi108_setup_pci(struct device_node *dev)
+int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
{
int len;
struct pci_controller *hose;
struct resource rsrc;
const int *bus_range;
- int primary = 0, has_address = 0;
+ int has_address = 0;
/* PCI Config mapping */
- tsi108_pci_cfg_base = (u32)ioremap(TSI108_PCI_CFG_BASE_PHYS,
- TSI108_PCI_CFG_SIZE);
+ tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
+ tsi108_pci_cfg_phys = cfg_phys;
DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__,
tsi108_pci_cfg_base);
const u32 *indexp, *dcrreg;
int len;
- BUG_ON(! device_is_compatible(node, "ibm,uic"));
+ BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
uic = alloc_bootmem(sizeof(*uic));
if (! uic)
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/dma-mapping.h>
#include <asm/system.h>
#include <asm/io.h>
-#include <asm/dma-mapping.h>
#include <asm/ppc4xx_dma.h>
void
/* Match it to a port node */
index = (ap == ap->host->ports[0]) ? 0 : 1;
for (np = np->child; np != NULL; np = np->sibling) {
- const u32 *reg = get_property(np, "reg", NULL);
+ const u32 *reg = of_get_property(np, "reg", NULL);
if (!reg)
continue;
if (index == *reg)
uninorth_node = of_find_node_by_name(NULL, "u3");
}
if (uninorth_node) {
- const int *revprop = get_property(uninorth_node,
+ const int *revprop = of_get_property(uninorth_node,
"device-rev", NULL);
if (revprop != NULL)
uninorth_rev = *revprop & 0x3f;
const char *machine;
int i;
- machine = get_property(root, "model", NULL);
+ machine = of_get_property(root, "model", NULL);
if (!machine || strncmp(machine, "TotalImpact,BRIQ-1", 18) != 0) {
of_node_put(root);
return -ENODEV;
if (!vtermno)
continue;
- if (!device_is_compatible(vty, "IBM,iSeries-vty"))
+ if (!of_device_is_compatible(vty, "IBM,iSeries-vty"))
continue;
if (num_found == 0)
if (!vtermno)
continue;
- if (device_is_compatible(vty, "hvterm1")) {
+ if (of_device_is_compatible(vty, "hvterm1")) {
hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops);
++num_found;
}
if (!dn)
return NULL;
- if (!device_is_compatible(dn, "AT97SC3201")) {
+ if (!of_device_is_compatible(dn, "AT97SC3201")) {
of_node_put(dn);
return NULL;
}
- reg = get_property(dn, "reg", ®len);
+ reg = of_get_property(dn, "reg", ®len);
naddrc = of_n_addr_cells(dn);
nsizec = of_n_size_cells(dn);
const u32 *prop;
/* Get orientation */
- prop = get_property(ams_info.of_node, "orientation", NULL);
+ prop = of_get_property(ams_info.of_node, "orientation", NULL);
if (!prop)
return -ENODEV;
ams_info.orient1 = *prop;
#ifdef CONFIG_SENSORS_AMS_I2C
np = of_find_node_by_name(NULL, "accelerometer");
- if (np && device_is_compatible(np, "AAPL,accelerometer_1"))
+ if (np && of_device_is_compatible(np, "AAPL,accelerometer_1"))
/* Found I2C motion sensor */
return ams_i2c_init(np);
#endif
#ifdef CONFIG_SENSORS_AMS_PMU
np = of_find_node_by_name(NULL, "sms");
- if (np && device_is_compatible(np, "sms"))
+ if (np && of_device_is_compatible(np, "sms"))
/* Found PMU motion sensor */
return ams_pmu_init(np);
#endif
ams_info.bustype = BUS_I2C;
/* look for bus either using "reg" or by path */
- prop = get_property(ams_info.of_node, "reg", NULL);
+ prop = of_get_property(ams_info.of_node, "reg", NULL);
if (!prop) {
result = -ENODEV;
ams_info.bustype = BUS_HOST;
/* Get PMU command, should be 0x4e, but we can never know */
- prop = get_property(ams_info.of_node, "reg", NULL);
+ prop = of_get_property(ams_info.of_node, "reg", NULL);
if (!prop) {
result = -ENODEV;
goto exit;
unsigned int class_rev = 0;
u8 conf;
- if (np == NULL || !device_is_compatible(np, "kiwi-root"))
+ if (np == NULL || !of_device_is_compatible(np, "kiwi-root"))
return;
pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
- if (device_is_compatible(np, "shasta-ata"))
+ if (of_device_is_compatible(np, "shasta-ata"))
pmif->kind = controller_sh_ata6;
- else if (device_is_compatible(np, "kauai-ata"))
+ else if (of_device_is_compatible(np, "kauai-ata"))
pmif->kind = controller_un_ata6;
- else if (device_is_compatible(np, "K2-UATA"))
+ else if (of_device_is_compatible(np, "K2-UATA"))
pmif->kind = controller_k2_ata6;
- else if (device_is_compatible(np, "keylargo-ata")) {
+ else if (of_device_is_compatible(np, "keylargo-ata")) {
if (strcmp(np->name, "ata-4") == 0)
pmif->kind = controller_kl_ata4;
else
pmif->kind = controller_kl_ata3;
- } else if (device_is_compatible(np, "heathrow-ata"))
+ } else if (of_device_is_compatible(np, "heathrow-ata"))
pmif->kind = controller_heathrow;
else {
pmif->kind = controller_ohare;
pmif->broken_dma = 1;
}
- bidp = get_property(np, "AAPL,bus-id", NULL);
+ bidp = of_get_property(np, "AAPL,bus-id", NULL);
pmif->aapl_bus_id = bidp ? *bidp : 0;
/* Get cable type from device-tree */
if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
|| pmif->kind == controller_sh_ata6) {
- const char* cable = get_property(np, "cable-type", NULL);
+ const char* cable = of_get_property(np, "cable-type", NULL);
if (cable && !strncmp(cable, "80-", 3))
pmif->cable_80 = 1;
}
* they have a 80 conductor cable, this seem to be always the case unless
* the user mucked around
*/
- if (device_is_compatible(np, "K2-UATA") ||
- device_is_compatible(np, "shasta-ata"))
+ if (of_device_is_compatible(np, "K2-UATA") ||
+ of_device_is_compatible(np, "shasta-ata"))
pmif->cable_80 = 1;
/* On Kauai-type controllers, we make sure the FCR is correct */
struct ib_pd *ibpd;
int ret;
- handle = get_property(dev->ofdev.node, "ibm,hca-handle", NULL);
+ handle = of_get_property(dev->ofdev.node, "ibm,hca-handle", NULL);
if (!handle) {
ehca_gen_err("Cannot get eHCA handle for adapter: %s.",
dev->ofdev.node->full_name);
-menu "Macintosh device drivers"
+menuconfig MACINTOSH_DRIVERS
+ bool "Macintosh device drivers"
depends on PPC || MAC || X86
+ default y
+
+if MACINTOSH_DRIVERS
config ADB
bool "Apple Desktop Bus (ADB) support"
config PMAC_APM_EMU
tristate "APM emulation"
- depends on PPC_PMAC && PPC32 && PM && ADB_PMU
+ select SYS_SUPPORTS_APM_EMULATION
+ select APM_EMULATION
+ depends on ADB_PMU && PM
config PMAC_MEDIABAY
bool "Support PowerBook hotswap media bay"
This driver procides some support to control the front panel
blue LEDs "vu-meter" of the XServer macs.
-endmenu
+endif # MACINTOSH_DRIVERS
-/* APM emulation layer for PowerMac
- *
- * Copyright 2001 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+/*
+ * APM emulation for PMU-based machines
*
- * Lots of code inherited from apm.c, see appropriate notice in
- * arch/i386/kernel/apm.c
+ * Copyright 2001 Benjamin Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
*
*/
-#include <linux/module.h>
-
-#include <linux/poll.h>
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/timer.h>
-#include <linux/fcntl.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-#include <linux/miscdevice.h>
-#include <linux/apm_bios.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/pm.h>
#include <linux/kernel.h>
-#include <linux/smp_lock.h>
-
+#include <linux/module.h>
+#include <linux/apm-emulation.h>
#include <linux/adb.h>
#include <linux/pmu.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(args...) printk(KERN_DEBUG args)
-//#define DBG(args...) xmon_printf(args)
-#else
-#define DBG(args...) do { } while (0)
-#endif
-
-/*
- * The apm_bios device is one of the misc char devices.
- * This is its minor number.
- */
-#define APM_MINOR_DEV 134
-
-/*
- * Maximum number of events stored
- */
-#define APM_MAX_EVENTS 20
-
-#define FAKE_APM_BIOS_VERSION 0x0101
-
-#define APM_USER_NOTIFY_TIMEOUT (5*HZ)
-
-/*
- * The per-file APM data
- */
-struct apm_user {
- int magic;
- struct apm_user * next;
- int suser: 1;
- int suspend_waiting: 1;
- int suspends_pending;
- int suspends_read;
- int event_head;
- int event_tail;
- apm_event_t events[APM_MAX_EVENTS];
-};
-
-/*
- * The magic number in apm_user
- */
-#define APM_BIOS_MAGIC 0x4101
-
-/*
- * Local variables
- */
-static int suspends_pending;
-
-static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
-static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
-static struct apm_user * user_list;
-
-static void apm_notify_sleep(struct pmu_sleep_notifier *self, int when);
-static struct pmu_sleep_notifier apm_sleep_notifier = {
- apm_notify_sleep,
- SLEEP_LEVEL_USERLAND,
-};
-
-static const char driver_version[] = "0.5"; /* no spaces */
-
-#ifdef DEBUG
-static char * apm_event_name[] = {
- "system standby",
- "system suspend",
- "normal resume",
- "critical resume",
- "low battery",
- "power status change",
- "update time",
- "critical suspend",
- "user standby",
- "user suspend",
- "system standby resume",
- "capabilities change"
-};
-#define NR_APM_EVENT_NAME \
- (sizeof(apm_event_name) / sizeof(apm_event_name[0]))
-
-#endif
-
-static int queue_empty(struct apm_user *as)
-{
- return as->event_head == as->event_tail;
-}
-
-static apm_event_t get_queued_event(struct apm_user *as)
-{
- as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS;
- return as->events[as->event_tail];
-}
-
-static void queue_event(apm_event_t event, struct apm_user *sender)
-{
- struct apm_user * as;
-
- DBG("apm_emu: queue_event(%s)\n", apm_event_name[event-1]);
- if (user_list == NULL)
- return;
- for (as = user_list; as != NULL; as = as->next) {
- if (as == sender)
- continue;
- as->event_head = (as->event_head + 1) % APM_MAX_EVENTS;
- if (as->event_head == as->event_tail) {
- static int notified;
-
- if (notified++ == 0)
- printk(KERN_ERR "apm_emu: an event queue overflowed\n");
- as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS;
- }
- as->events[as->event_head] = event;
- if (!as->suser)
- continue;
- switch (event) {
- case APM_SYS_SUSPEND:
- case APM_USER_SUSPEND:
- as->suspends_pending++;
- suspends_pending++;
- break;
- case APM_NORMAL_RESUME:
- as->suspend_waiting = 0;
- break;
- }
- }
- wake_up_interruptible(&apm_waitqueue);
-}
-
-static int check_apm_user(struct apm_user *as, const char *func)
-{
- if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) {
- printk(KERN_ERR "apm_emu: %s passed bad filp\n", func);
- return 1;
- }
- return 0;
-}
-
-static ssize_t do_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos)
-{
- struct apm_user * as;
- size_t i;
- apm_event_t event;
- DECLARE_WAITQUEUE(wait, current);
-
- as = fp->private_data;
- if (check_apm_user(as, "read"))
- return -EIO;
- if (count < sizeof(apm_event_t))
- return -EINVAL;
- if (queue_empty(as)) {
- if (fp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- add_wait_queue(&apm_waitqueue, &wait);
-repeat:
- set_current_state(TASK_INTERRUPTIBLE);
- if (queue_empty(as) && !signal_pending(current)) {
- schedule();
- goto repeat;
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&apm_waitqueue, &wait);
- }
- i = count;
- while ((i >= sizeof(event)) && !queue_empty(as)) {
- event = get_queued_event(as);
- DBG("apm_emu: do_read, returning: %s\n", apm_event_name[event-1]);
- if (copy_to_user(buf, &event, sizeof(event))) {
- if (i < count)
- break;
- return -EFAULT;
- }
- switch (event) {
- case APM_SYS_SUSPEND:
- case APM_USER_SUSPEND:
- as->suspends_read++;
- break;
- }
- buf += sizeof(event);
- i -= sizeof(event);
- }
- if (i < count)
- return count - i;
- if (signal_pending(current))
- return -ERESTARTSYS;
- return 0;
-}
-
-static unsigned int do_poll(struct file *fp, poll_table * wait)
-{
- struct apm_user * as;
-
- as = fp->private_data;
- if (check_apm_user(as, "poll"))
- return 0;
- poll_wait(fp, &apm_waitqueue, wait);
- if (!queue_empty(as))
- return POLLIN | POLLRDNORM;
- return 0;
-}
-
-static int do_ioctl(struct inode * inode, struct file *filp,
- u_int cmd, u_long arg)
-{
- struct apm_user * as;
- DECLARE_WAITQUEUE(wait, current);
-
- as = filp->private_data;
- if (check_apm_user(as, "ioctl"))
- return -EIO;
- if (!as->suser)
- return -EPERM;
- switch (cmd) {
- case APM_IOC_SUSPEND:
- /* If a suspend message was sent to userland, we
- * consider this as a confirmation message
- */
- if (as->suspends_read > 0) {
- as->suspends_read--;
- as->suspends_pending--;
- suspends_pending--;
- } else {
- // Route to PMU suspend ?
- break;
- }
- as->suspend_waiting = 1;
- add_wait_queue(&apm_waitqueue, &wait);
- DBG("apm_emu: ioctl waking up sleep waiter !\n");
- wake_up(&apm_suspend_waitqueue);
- mb();
- while(as->suspend_waiting && !signal_pending(current)) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&apm_waitqueue, &wait);
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static int do_release(struct inode * inode, struct file * filp)
-{
- struct apm_user * as;
-
- as = filp->private_data;
- if (check_apm_user(as, "release"))
- return 0;
- filp->private_data = NULL;
- lock_kernel();
- if (as->suspends_pending > 0) {
- suspends_pending -= as->suspends_pending;
- if (suspends_pending <= 0)
- wake_up(&apm_suspend_waitqueue);
- }
- if (user_list == as)
- user_list = as->next;
- else {
- struct apm_user * as1;
-
- for (as1 = user_list;
- (as1 != NULL) && (as1->next != as);
- as1 = as1->next)
- ;
- if (as1 == NULL)
- printk(KERN_ERR "apm: filp not in user list\n");
- else
- as1->next = as->next;
- }
- unlock_kernel();
- kfree(as);
- return 0;
-}
-
-static int do_open(struct inode * inode, struct file * filp)
-{
- struct apm_user * as;
-
- as = kmalloc(sizeof(*as), GFP_KERNEL);
- if (as == NULL) {
- printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
- sizeof(*as));
- return -ENOMEM;
- }
- as->magic = APM_BIOS_MAGIC;
- as->event_tail = as->event_head = 0;
- as->suspends_pending = 0;
- as->suspends_read = 0;
- /*
- * XXX - this is a tiny bit broken, when we consider BSD
- * process accounting. If the device is opened by root, we
- * instantly flag that we used superuser privs. Who knows,
- * we might close the device immediately without doing a
- * privileged operation -- cevans
- */
- as->suser = capable(CAP_SYS_ADMIN);
- as->next = user_list;
- user_list = as;
- filp->private_data = as;
-
- DBG("apm_emu: opened by %s, suser: %d\n", current->comm, (int)as->suser);
-
- return 0;
-}
-
-/* Wait for all clients to ack the suspend request. APM API
- * doesn't provide a way to NAK, but this could be added
- * here.
- */
-static void wait_all_suspend(void)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(&apm_suspend_waitqueue, &wait);
- DBG("apm_emu: wait_all_suspend(), suspends_pending: %d\n", suspends_pending);
- while(suspends_pending > 0) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule();
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&apm_suspend_waitqueue, &wait);
-
- DBG("apm_emu: wait_all_suspend() - complete !\n");
-}
-
-static void apm_notify_sleep(struct pmu_sleep_notifier *self, int when)
-{
- switch(when) {
- case PBOOK_SLEEP_REQUEST:
- queue_event(APM_SYS_SUSPEND, NULL);
- wait_all_suspend();
- break;
- case PBOOK_WAKE:
- queue_event(APM_NORMAL_RESUME, NULL);
- break;
- }
-}
-
#define APM_CRITICAL 10
#define APM_LOW 30
-static int apm_emu_get_info(char *buf, char **start, off_t fpos, int length)
+static void pmu_apm_get_power_status(struct apm_power_info *info)
{
- /* Arguments, with symbols from linux/apm_bios.h. Information is
- from the Get Power Status (0x0a) call unless otherwise noted.
+ int percentage = -1;
+ int batteries = 0;
+ int time_units = -1;
+ int real_count = 0;
+ int i;
+ char charging = 0;
+ long charge = -1;
+ long amperage = 0;
+ unsigned long btype = 0;
+
+ info->battery_status = APM_BATTERY_STATUS_UNKNOWN;
+ info->battery_flag = APM_BATTERY_FLAG_UNKNOWN;
+ info->units = APM_UNITS_MINS;
+
+ if (pmu_power_flags & PMU_PWR_AC_PRESENT)
+ info->ac_line_status = APM_AC_ONLINE;
+ else
+ info->ac_line_status = APM_AC_OFFLINE;
- 0) Linux driver version (this will change if format changes)
- 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2.
- 2) APM flags from APM Installation Check (0x00):
- bit 0: APM_16_BIT_SUPPORT
- bit 1: APM_32_BIT_SUPPORT
- bit 2: APM_IDLE_SLOWS_CLOCK
- bit 3: APM_BIOS_DISABLED
- bit 4: APM_BIOS_DISENGAGED
- 3) AC line status
- 0x00: Off-line
- 0x01: On-line
- 0x02: On backup power (BIOS >= 1.1 only)
- 0xff: Unknown
- 4) Battery status
- 0x00: High
- 0x01: Low
- 0x02: Critical
- 0x03: Charging
- 0x04: Selected battery not present (BIOS >= 1.2 only)
- 0xff: Unknown
- 5) Battery flag
- bit 0: High
- bit 1: Low
- bit 2: Critical
- bit 3: Charging
- bit 7: No system battery
- 0xff: Unknown
- 6) Remaining battery life (percentage of charge):
- 0-100: valid
- -1: Unknown
- 7) Remaining battery life (time units):
- Number of remaining minutes or seconds
- -1: Unknown
- 8) min = minutes; sec = seconds */
-
- unsigned short ac_line_status;
- unsigned short battery_status = 0;
- unsigned short battery_flag = 0xff;
- int percentage = -1;
- int time_units = -1;
- int real_count = 0;
- int i;
- char * p = buf;
- char charging = 0;
- long charge = -1;
- long amperage = 0;
- unsigned long btype = 0;
-
- ac_line_status = ((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0);
for (i=0; i<pmu_battery_count; i++) {
if (pmu_batteries[i].flags & PMU_BATT_PRESENT) {
- battery_status++;
+ batteries++;
if (percentage < 0)
percentage = 0;
if (charge < 0)
charging++;
}
}
- if (0 == battery_status)
- ac_line_status = 1;
- battery_status = 0xff;
+ if (batteries == 0)
+ info->ac_line_status = APM_AC_ONLINE;
+
if (real_count) {
if (amperage < 0) {
if (btype == PMU_BATT_TYPE_SMART)
}
percentage /= real_count;
if (charging > 0) {
- battery_status = 0x03;
- battery_flag = 0x08;
+ info->battery_status = APM_BATTERY_STATUS_CHARGING;
+ info->battery_flag = APM_BATTERY_FLAG_CHARGING;
} else if (percentage <= APM_CRITICAL) {
- battery_status = 0x02;
- battery_flag = 0x04;
+ info->battery_status = APM_BATTERY_STATUS_CRITICAL;
+ info->battery_flag = APM_BATTERY_FLAG_CRITICAL;
} else if (percentage <= APM_LOW) {
- battery_status = 0x01;
- battery_flag = 0x02;
+ info->battery_status = APM_BATTERY_STATUS_LOW;
+ info->battery_flag = APM_BATTERY_FLAG_LOW;
} else {
- battery_status = 0x00;
- battery_flag = 0x01;
+ info->battery_status = APM_BATTERY_STATUS_HIGH;
+ info->battery_flag = APM_BATTERY_FLAG_HIGH;
}
}
- p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n",
- driver_version,
- (FAKE_APM_BIOS_VERSION >> 8) & 0xff,
- FAKE_APM_BIOS_VERSION & 0xff,
- 0,
- ac_line_status,
- battery_status,
- battery_flag,
- percentage,
- time_units,
- "min");
- return p - buf;
+ info->battery_life = percentage;
+ info->time = time_units;
}
-static const struct file_operations apm_bios_fops = {
- .owner = THIS_MODULE,
- .read = do_read,
- .poll = do_poll,
- .ioctl = do_ioctl,
- .open = do_open,
- .release = do_release,
-};
-
-static struct miscdevice apm_device = {
- APM_MINOR_DEV,
- "apm_bios",
- &apm_bios_fops
-};
-
static int __init apm_emu_init(void)
{
- struct proc_dir_entry *apm_proc;
-
- if (sys_ctrler != SYS_CTRLER_PMU) {
- printk(KERN_INFO "apm_emu: Requires a machine with a PMU.\n");
- return -ENODEV;
- }
-
- apm_proc = create_proc_info_entry("apm", 0, NULL, apm_emu_get_info);
- if (apm_proc)
- apm_proc->owner = THIS_MODULE;
+ apm_get_power_status = pmu_apm_get_power_status;
- if (misc_register(&apm_device) != 0)
- printk(KERN_INFO "Could not create misc. device for apm\n");
-
- pmu_register_sleep_notifier(&apm_sleep_notifier);
-
- printk(KERN_INFO "apm_emu: APM Emulation %s initialized.\n", driver_version);
+ printk(KERN_INFO "apm_emu: PMU APM Emulation initialized.\n");
return 0;
}
static void __exit apm_emu_exit(void)
{
- pmu_unregister_sleep_notifier(&apm_sleep_notifier);
- misc_deregister(&apm_device);
- remove_proc_entry("apm", NULL);
+ if (apm_get_power_status == pmu_apm_get_power_status)
+ apm_get_power_status = NULL;
- printk(KERN_INFO "apm_emu: APM Emulation removed.\n");
+ printk(KERN_INFO "apm_emu: PMU APM Emulation removed.\n");
}
module_init(apm_emu_init);
module_exit(apm_emu_exit);
MODULE_AUTHOR("Benjamin Herrenschmidt");
-MODULE_DESCRIPTION("APM emulation layer for PowerMac");
+MODULE_DESCRIPTION("APM emulation for PowerMac");
MODULE_LICENSE("GPL");
-
#if defined(CONFIG_SYSCTL)
/* file(s) in /proc/sys/dev/mac_hid */
-ctl_table mac_hid_files[] = {
+static ctl_table mac_hid_files[] = {
{
.ctl_name = DEV_MAC_HID_MOUSE_BUTTON_EMULATION,
.procname = "mouse_button_emulation",
};
/* dir in /proc/sys/dev */
-ctl_table mac_hid_dir[] = {
+static ctl_table mac_hid_dir[] = {
{
.ctl_name = DEV_MAC_HID,
.procname = "mac_hid",
};
/* /proc/sys/dev itself, in case that is not there yet */
-ctl_table mac_hid_root_dir[] = {
+static ctl_table mac_hid_root_dir[] = {
{
.ctl_name = CTL_DEV,
.procname = "dev",
return ret;
}
-int __init mac_hid_init(void)
+static int __init mac_hid_init(void)
{
int err;
static ssize_t modalias_show (struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct of_device *of;
- const char *compat;
- int cplen;
- int length;
+ struct of_device *ofdev = to_of_device(dev);
+ int len;
- of = &to_macio_device (dev)->ofdev;
- compat = of_get_property(of->node, "compatible", &cplen);
- if (!compat) compat = "", cplen = 1;
- length = sprintf (buf, "of:N%sT%s", of->node->name, of->node->type);
- buf += length;
- while (cplen > 0) {
- int l;
- l = sprintf (buf, "C%s", compat);
- length += l;
- buf += l;
- l = strlen (compat) + 1;
- compat += l;
- cplen -= l;
- }
- length += sprintf(buf, "\n");
+ len = of_device_get_modalias(ofdev, buf, PAGE_SIZE);
- return length;
+ buf[len] = '\n';
+ buf[len+1] = 0;
+
+ return len+1;
}
macio_config_of_attr (name, "%s\n");
struct device_node *np;
for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;)
- if (device_is_compatible(np, "smu-sensors"))
+ if (of_device_is_compatible(np, "smu-sensors"))
of_platform_device_create(np, "smu-sensors",
&smu->of_dev->dev);
}
np = of_find_node_by_name(NULL, "fan");
if (!np)
return -ENODEV;
- if (device_is_compatible(np, "adt7460"))
+ if (of_device_is_compatible(np, "adt7460"))
therm_type = ADT7460;
- else if (device_is_compatible(np, "adt7467"))
+ else if (of_device_is_compatible(np, "adt7467"))
therm_type = ADT7467;
else
return -ENODEV;
static struct adb_request pmu_blink_req;
/* -1: no change, 0: request off, 1: request on */
static int requested_change;
-static int sleeping;
static void pmu_req_done(struct adb_request * req)
{
/* if someone requested a change in the meantime
* (we only see the last one which is fine)
* then apply it now */
- if (requested_change != -1 && !sleeping)
+ if (requested_change != -1 && !pmu_sys_suspended)
pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change);
/* reset requested change */
requested_change = -1;
break;
}
/* if request isn't done, then don't do anything */
- if (pmu_blink_req.complete && !sleeping)
+ if (pmu_blink_req.complete && !pmu_sys_suspended)
pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change);
out:
spin_unlock_irqrestore(&pmu_blink_lock, flags);
.brightness_set = pmu_led_set,
};
-#ifdef CONFIG_PM
-static void pmu_led_sleep_call(struct pmu_sleep_notifier *self, int when)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pmu_blink_lock, flags);
-
- switch (when) {
- case PBOOK_SLEEP_REQUEST:
- sleeping = 1;
- break;
- case PBOOK_WAKE:
- sleeping = 0;
- break;
- default:
- /* do nothing */
- break;
- }
- spin_unlock_irqrestore(&pmu_blink_lock, flags);
-}
-
-static struct pmu_sleep_notifier via_pmu_led_sleep_notif = {
- .notifier_call = pmu_led_sleep_call,
-};
-#endif
-
static int __init via_pmu_led_init(void)
{
struct device_node *dt;
/* no outstanding req */
pmu_blink_req.complete = 1;
pmu_blink_req.done = pmu_req_done;
-#ifdef CONFIG_PM
- pmu_register_sleep_notifier(&via_pmu_led_sleep_notif);
-#endif
+
return led_classdev_register(NULL, &pmu_led);
}
PMU_INT_TICK;
if (vias->parent->name && ((strcmp(vias->parent->name, "ohare") == 0)
- || device_is_compatible(vias->parent, "ohare")))
+ || of_device_is_compatible(vias->parent, "ohare")))
pmu_kind = PMU_OHARE_BASED;
- else if (device_is_compatible(vias->parent, "paddington"))
+ else if (of_device_is_compatible(vias->parent, "paddington"))
pmu_kind = PMU_PADDINGTON_BASED;
- else if (device_is_compatible(vias->parent, "heathrow"))
+ else if (of_device_is_compatible(vias->parent, "heathrow"))
pmu_kind = PMU_HEATHROW_BASED;
- else if (device_is_compatible(vias->parent, "Keylargo")
- || device_is_compatible(vias->parent, "K2-Keylargo")) {
+ else if (of_device_is_compatible(vias->parent, "Keylargo")
+ || of_device_is_compatible(vias->parent, "K2-Keylargo")) {
struct device_node *gpiop;
struct device_node *adbp;
u64 gaddr = OF_BAD_ADDR;
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
-static int pmu_sys_suspended;
+int pmu_sys_suspended;
static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
{
if (loc == NULL || addr == 0)
continue;
/* real lm75 */
- if (device_is_compatible(dev, "lm75"))
+ if (of_device_is_compatible(dev, "lm75"))
wf_lm75_create(adapter, addr, 0, loc);
/* ds1775 (compatible, better resolution */
- else if (device_is_compatible(dev, "ds1775"))
+ else if (of_device_is_compatible(dev, "ds1775"))
wf_lm75_create(adapter, addr, 1, loc);
}
return 0;
*/
if (!pmac_i2c_match_adapter(dev, adapter))
continue;
- if (!device_is_compatible(dev, "max6690"))
+ if (!of_device_is_compatible(dev, "max6690"))
continue;
addr = pmac_i2c_get_dev_addr(dev);
loc = of_get_property(dev, "hwsensor-location", NULL);
/* Look for RPM fans */
for (fans = NULL; (fans = of_get_next_child(smu, fans)) != NULL;)
if (!strcmp(fans->name, "rpm-fans") ||
- device_is_compatible(fans, "smu-rpm-fans"))
+ of_device_is_compatible(fans, "smu-rpm-fans"))
break;
for (fan = NULL;
fans && (fan = of_get_next_child(fans, fan)) != NULL;) {
busnode = pmac_i2c_get_bus_node(bus);
while ((dev = of_get_next_child(busnode, dev)) != NULL)
- if (device_is_compatible(dev, "smu-sat"))
+ if (of_device_is_compatible(dev, "smu-sat"))
wf_sat_create(adapter, dev);
return 0;
}
const u32 *part;
const char *name;
- part = get_property(node, "partitions", &plen);
+ part = of_get_property(node, "partitions", &plen);
if (part == NULL)
goto err;
goto err;
}
- name = get_property(node, "partition-names", &plen);
+ name = of_get_property(node, "partition-names", &plen);
for (i = 0; i < retval; i++) {
(*parts)[i].offset = *part++;
goto err_out;
}
- width = get_property(dp, "bank-width", NULL);
+ width = of_get_property(dp, "bank-width", NULL);
if (width == NULL) {
dev_err(&dev->dev, "Can't get the flash bank width!\n");
err = -EINVAL;
simple_map_init(&info->map);
- of_probe = get_property(dp, "probe-type", NULL);
+ of_probe = of_get_property(dp, "probe-type", NULL);
if (of_probe == NULL) {
probe_type = rom_probe_types;
for (; info->mtd == NULL && *probe_type != NULL; probe_type++)
printk(KERN_ERR "BMAC: can't use, need 3 addrs and 3 intrs\n");
return -ENODEV;
}
- prop_addr = get_property(macio_get_of_node(mdev), "mac-address", NULL);
+ prop_addr = of_get_property(macio_get_of_node(mdev),
+ "mac-address", NULL);
if (prop_addr == NULL) {
- prop_addr = get_property(macio_get_of_node(mdev),
+ prop_addr = of_get_property(macio_get_of_node(mdev),
"local-mac-address", NULL);
if (prop_addr == NULL) {
printk(KERN_ERR "BMAC: Can't get mac-address\n");
{
struct device_node *lhea_dn;
struct device_node *eth_dn = NULL;
-
- u32 *dn_log_port_id;
+ const u32 *dn_log_port_id;
int i = 0;
lhea_dn = adapter->ebus_dev->ofdev.node;
while ((eth_dn = of_get_next_child(lhea_dn, eth_dn))) {
- dn_log_port_id = (u32*)get_property(eth_dn, "ibm,hea-port-no",
+ dn_log_port_id = of_get_property(eth_dn, "ibm,hea-port-no",
NULL);
if (!dn_log_port_id) {
ehea_error("bad device node: eth_dn name=%s",
{
struct device_node *lhea_dn;
struct device_node *eth_dn = NULL;
- u32 *dn_log_port_id;
+ const u32 *dn_log_port_id;
lhea_dn = adapter->ebus_dev->ofdev.node;
while ((eth_dn = of_get_next_child(lhea_dn, eth_dn))) {
- dn_log_port_id = (u32*)get_property(eth_dn, "ibm,hea-port-no",
+ dn_log_port_id = of_get_property(eth_dn, "ibm,hea-port-no",
NULL);
if (dn_log_port_id)
if (*dn_log_port_id == logical_port_id)
const struct of_device_id *id)
{
struct ehea_adapter *adapter;
- u64 *adapter_handle;
+ const u64 *adapter_handle;
int ret;
if (!dev || !dev->ofdev.node) {
adapter->ebus_dev = dev;
- adapter_handle = (u64*)get_property(dev->ofdev.node, "ibm,hea-handle",
+ adapter_handle = of_get_property(dev->ofdev.node, "ibm,hea-handle",
NULL);
if (adapter_handle)
adapter->handle = *adapter_handle;
return -ENODEV;
}
- addr = get_property(mace, "mac-address", NULL);
+ addr = of_get_property(mace, "mac-address", NULL);
if (addr == NULL) {
- addr = get_property(mace, "local-mac-address", NULL);
+ addr = of_get_property(mace, "local-mac-address", NULL);
if (addr == NULL) {
printk(KERN_ERR "Can't get mac-address for MACE %s\n",
mace->full_name);
return -ENOENT;
}
- maddr = get_property(dn, "mac-address", NULL);
+ maddr = of_get_property(dn, "mac-address", NULL);
if (maddr == NULL) {
dev_warn(&pdev->dev,
"no mac address in device tree, not configuring\n");
if (!dn)
goto out_err;
- fw_prop = get_property(dn, "firmware", &fw_size);
+ fw_prop = of_get_property(dn, "firmware", &fw_size);
if (!fw_prop)
goto out_err;
if (!dn)
return -EIO;
- mac = get_property(dn, "local-mac-address", NULL);
+ mac = of_get_property(dn, "local-mac-address", NULL);
if (!mac)
return -EIO;
memcpy(addr.sa_data, mac, ETH_ALEN);
struct net_device *dev = gp->dev;
const unsigned char *addr;
- addr = get_property(gp->of_node, "local-mac-address", NULL);
+ addr = of_get_property(gp->of_node, "local-mac-address", NULL);
if (addr == NULL) {
#ifdef CONFIG_SPARC
addr = idprom->id_ethaddr;
if (phy->platform_data) {
struct device_node *np = of_get_parent(phy->platform_data);
int can_low_power = 1;
- if (np == NULL || get_property(np, "no-autolowpower", NULL))
+ if (np == NULL || of_get_property(np, "no-autolowpower", NULL))
can_low_power = 0;
if (can_low_power) {
/* Enable automatic low-power */
unsigned int phy; /* Index of PHY for this interface */
unsigned int irq_num;
unsigned int id;
+ unsigned int phy_type;
struct timer_list timer;/* Timer that triggers the check phy function */
unsigned int rxtail; /* Next entry in rxring to read */
if (i == 0)
printk(KERN_ERR "%s function time out \n", __FUNCTION__);
-#if (TSI108_PHY_TYPE == PHY_BCM54XX) /* Broadcom BCM54xx PHY */
- tsi108_write_mii(data, 0x09, 0x0300);
- tsi108_write_mii(data, 0x10, 0x1020);
- tsi108_write_mii(data, 0x1c, 0x8c00);
-#endif
+ if (data->phy_type == TSI108_PHY_BCM54XX) {
+ tsi108_write_mii(data, 0x09, 0x0300);
+ tsi108_write_mii(data, 0x10, 0x1020);
+ tsi108_write_mii(data, 0x1c, 0x8c00);
+ }
tsi108_write_mii(data,
MII_BMCR,
data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if);
data->phy = einfo->phy;
+ data->phy_type = einfo->phy_type;
data->irq_num = einfo->irq_num;
data->id = pdev->id;
dev->open = tsi108_open;
#define TSI_READ_PHY(offset) \
in_be32((data->phyregs + (offset)))
-/*
- * PHY Configuration Options
- *
- * NOTE: Enable set of definitions corresponding to your board type
- */
-#define PHY_MV88E 1 /* Marvel 88Exxxx PHY */
-#define PHY_BCM54XX 2 /* Broardcom BCM54xx PHY */
-#define TSI108_PHY_TYPE PHY_MV88E
-
/*
* TSI108 GIGE port registers
*/
ugeth_vdbg("%s: IN", __FUNCTION__);
- prop = get_property(np, "device-id", NULL);
+ prop = of_get_property(np, "device-id", NULL);
ucc_num = *prop - 1;
if ((ucc_num < 0) || (ucc_num > 7))
return -ENODEV;
ug_info = &ugeth_info[ucc_num];
ug_info->uf_info.ucc_num = ucc_num;
- prop = get_property(np, "rx-clock", NULL);
+ prop = of_get_property(np, "rx-clock", NULL);
ug_info->uf_info.rx_clock = *prop;
- prop = get_property(np, "tx-clock", NULL);
+ prop = of_get_property(np, "tx-clock", NULL);
ug_info->uf_info.tx_clock = *prop;
err = of_address_to_resource(np, 0, &res);
if (err)
ug_info->uf_info.regs = res.start;
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
- ph = get_property(np, "phy-handle", NULL);
+ ph = of_get_property(np, "phy-handle", NULL);
phy = of_find_node_by_phandle(*ph);
if (phy == NULL)
return -ENODEV;
/* set the PHY address */
- prop = get_property(phy, "reg", NULL);
+ prop = of_get_property(phy, "reg", NULL);
if (prop == NULL)
return -1;
ug_info->phy_address = *prop;
/* get the phy interface type, or default to MII */
- prop = get_property(np, "interface-type", NULL);
+ prop = of_get_property(np, "interface-type", NULL);
if (!prop) {
/* handle interface property present in old trees */
- prop = get_property(phy, "interface", NULL);
+ prop = of_get_property(phy, "interface", NULL);
if (prop != NULL)
phy_interface = enet_to_phy_interface[*prop];
else
}
/* get speed, or derive from interface */
- prop = get_property(np, "max-speed", NULL);
+ prop = of_get_property(np, "max-speed", NULL);
if (!prop) {
/* handle interface property present in old trees */
- prop = get_property(phy, "interface", NULL);
+ prop = of_get_property(phy, "interface", NULL);
if (prop != NULL)
max_speed = enet_to_speed[*prop];
} else {
while ((child = of_get_next_child(np, child)) != NULL) {
int irq = irq_of_parse_and_map(child, 0);
if (irq != NO_IRQ) {
- const u32 *id = get_property(child, "reg", NULL);
+ const u32 *id = of_get_property(child, "reg", NULL);
new_bus->irq[*id] = irq;
}
}
if ((res.start >= tempres.start) &&
(res.end <= tempres.end)) {
/* set this UCC to be the MII master */
- const u32 *id = get_property(tempnp, "device-id", NULL);
+ const u32 *id = of_get_property(tempnp, "device-id", NULL);
if (id == NULL)
goto bus_register_fail;
{
const int *indexes, *names, *types, *domains;
- indexes = get_property(dn, "ibm,drc-indexes", NULL);
- names = get_property(dn, "ibm,drc-names", NULL);
- types = get_property(dn, "ibm,drc-types", NULL);
- domains = get_property(dn, "ibm,drc-power-domains", NULL);
+ indexes = of_get_property(dn, "ibm,drc-indexes", NULL);
+ names = of_get_property(dn, "ibm,drc-names", NULL);
+ types = of_get_property(dn, "ibm,drc-types", NULL);
+ domains = of_get_property(dn, "ibm,drc-power-domains", NULL);
if (!indexes || !names || !types || !domains) {
/* Slot does not have dynamically-removable children */
char *name_tmp, *type_tmp;
int i, rc;
- my_index = get_property(dn, "ibm,my-drc-index", NULL);
+ my_index = of_get_property(dn, "ibm,my-drc-index", NULL);
if (!my_index) {
/* Node isn't DLPAR/hotplug capable */
return -EINVAL;
if (++vuart_bus_priv.use_count == 1) {
- result = ps3_alloc_vuart_irq(PS3_BINDING_CPU_ANY,
+ result = ps3_vuart_irq_setup(PS3_BINDING_CPU_ANY,
(void*)&vuart_bus_priv.bmp.status, &vuart_bus_priv.virq);
if (result) {
dev_dbg(&dev->core,
- "%s:%d: ps3_alloc_vuart_irq failed (%d)\n",
+ "%s:%d: ps3_vuart_irq_setup failed (%d)\n",
__func__, __LINE__, result);
result = -EPERM;
goto fail_alloc_irq;
fail_probe:
ps3_vuart_set_interrupt_mask(dev, 0);
fail_request_irq:
- ps3_free_vuart_irq(vuart_bus_priv.virq);
+ ps3_vuart_irq_destroy(vuart_bus_priv.virq);
vuart_bus_priv.virq = NO_IRQ;
fail_alloc_irq:
--vuart_bus_priv.use_count;
if (--vuart_bus_priv.use_count == 0) {
BUG();
free_irq(vuart_bus_priv.virq, &vuart_bus_priv);
- ps3_free_vuart_irq(vuart_bus_priv.virq);
+ ps3_vuart_irq_destroy(vuart_bus_priv.virq);
vuart_bus_priv.virq = NO_IRQ;
}
if (!rootdn)
return -ENOENT;
- model = get_property(rootdn, "model", NULL);
- id = get_property(rootdn, "system-id", NULL);
+ model = of_get_property(rootdn, "model", NULL);
+ id = of_get_property(rootdn, "system-id", NULL);
if (model && id)
snprintf(system_id, sizeof(system_id), "%s-%s", model, id);
- name = get_property(rootdn, "ibm,partition-name", NULL);
+ name = of_get_property(rootdn, "ibm,partition-name", NULL);
if (name)
strncpy(partition_name, name, sizeof(partition_name));
- num = get_property(rootdn, "ibm,partition-no", NULL);
+ num = of_get_property(rootdn, "ibm,partition-no", NULL);
if (num)
partition_number = *num;
return;
}
- ppartition_name = get_property(rootdn, "ibm,partition-name", NULL);
+ ppartition_name = of_get_property(rootdn, "ibm,partition-name", NULL);
if (ppartition_name)
strncpy(partition_name, ppartition_name,
sizeof(partition_name));
- p_number_ptr = get_property(rootdn, "ibm,partition-no", NULL);
+ p_number_ptr = of_get_property(rootdn, "ibm,partition-no", NULL);
if (p_number_ptr)
partition_number = *p_number_ptr;
of_node_put(rootdn);
goto out_free;
}
- clkprop = get_property(node, "clock-frequency", &proplen);
+ clkprop = of_get_property(node, "clock-frequency", &proplen);
if (clkprop == NULL || proplen != sizeof(int)) {
printk(KERN_ERR "%s: can't get clock frequency, "
"assuming 25MHz\n", node->full_name);
ms->tgts[tgt].current_req = NULL;
}
- if ((cfp = get_property(mesh, "clock-frequency", NULL)))
+ if ((cfp = of_get_property(mesh, "clock-frequency", NULL)))
ms->clk_freq = *cfp;
else {
printk(KERN_INFO "mesh: assuming 50MHz clock frequency\n");
{
struct mpc52xx_psc __iomem *psc = PSC(port);
- /* Shut down the port, interrupt and all */
+ /* Shut down the port. Leave TX active if on a console port */
out_8(&psc->command,MPC52xx_PSC_RST_RX);
- out_8(&psc->command,MPC52xx_PSC_RST_TX);
+ if (!uart_console(port))
+ out_8(&psc->command,MPC52xx_PSC_RST_TX);
port->read_status_mask = 0;
out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
continue;
/* Is a particular device number requested? */
- devno = get_property(np, "port-number", NULL);
+ devno = of_get_property(np, "port-number", NULL);
mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1);
}
int ret;
memset(port, 0, sizeof *port);
- spd = get_property(np, "current-speed", NULL);
- clk = get_property(np, "clock-frequency", NULL);
+ spd = of_get_property(np, "current-speed", NULL);
+ clk = of_get_property(np, "clock-frequency", NULL);
if (!clk) {
dev_warn(&ofdev->dev, "no clock-frequency property set\n");
return -ENODEV;
/*
* Detect port type
*/
- if (device_is_compatible(np, "cobalt"))
+ if (of_device_is_compatible(np, "cobalt"))
uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
- conn = get_property(np, "AAPL,connector", &len);
+ conn = of_get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
uap->port_type = PMAC_SCC_ASYNC;
/* 1999 Powerbook G3 has slot-names property instead */
- slots = get_property(np, "slot-names", &len);
+ slots = of_get_property(np, "slot-names", &len);
if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
of_find_node_by_name(NULL, "i2c-modem");
if (i2c_modem) {
const char* mid =
- get_property(i2c_modem, "modem-id", NULL);
+ of_get_property(i2c_modem, "modem-id", NULL);
if (mid) switch(*mid) {
case 0x04 :
case 0x05 :
dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__,
__LINE__, dev->m_region->lpar_addr);
- result = ps3_alloc_io_irq(PS3_BINDING_CPU_ANY, dev->interrupt_id, &virq);
+ result = ps3_io_irq_setup(PS3_BINDING_CPU_ANY, dev->interrupt_id, &virq);
if (result) {
dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n",
fail_ioremap:
usb_put_hcd(hcd);
fail_create_hcd:
- ps3_free_io_irq(virq);
+ ps3_io_irq_destroy(virq);
fail_irq:
ps3_free_mmio_region(dev->m_region);
fail_mmio:
return -ENODEV;
is_bigendian =
- device_is_compatible(dn, "ohci-bigendian") ||
- device_is_compatible(dn, "ohci-be");
+ of_device_is_compatible(dn, "ohci-bigendian") ||
+ of_device_is_compatible(dn, "ohci-be");
dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__,
__LINE__, dev->m_region->lpar_addr);
- result = ps3_alloc_io_irq(PS3_BINDING_CPU_ANY, dev->interrupt_id, &virq);
+ result = ps3_io_irq_setup(PS3_BINDING_CPU_ANY, dev->interrupt_id, &virq);
if (result) {
dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n",
fail_ioremap:
usb_put_hcd(hcd);
fail_create_hcd:
- ps3_free_io_irq(virq);
+ ps3_io_irq_destroy(virq);
fail_irq:
ps3_free_mmio_region(dev->m_region);
fail_mmio:
if (dp == NULL)
return -ENODEV;
- val = get_property(dp, "ATY,RefCLK", NULL);
+ val = of_get_property(dp, "ATY,RefCLK", NULL);
if (!val || !*val) {
printk(KERN_WARNING "radeonfb: No ATY,RefCLK property !\n");
return -EINVAL;
rinfo->pll.ref_clk = (*val) / 10;
- val = get_property(dp, "ATY,SCLK", NULL);
+ val = of_get_property(dp, "ATY,SCLK", NULL);
if (val && *val)
rinfo->pll.sclk = (*val) / 10;
- val = get_property(dp, "ATY,MCLK", NULL);
+ val = of_get_property(dp, "ATY,MCLK", NULL);
if (val && *val)
rinfo->pll.mclk = (*val) / 10;
int i, mt = MT_NONE;
RTRACE("analyzing OF properties...\n");
- pmt = get_property(dp, "display-type", NULL);
+ pmt = of_get_property(dp, "display-type", NULL);
if (!pmt)
return MT_NONE;
RTRACE("display-type: %s\n", pmt);
}
for (i = 0; propnames[i] != NULL; ++i) {
- pedid = get_property(dp, propnames[i], NULL);
+ pedid = of_get_property(dp, propnames[i], NULL);
if (pedid != NULL)
break;
}
* single-head cards have hdno == -1 and skip this step
*/
if (pedid == NULL && dp->parent && (hdno != -1))
- pedid = get_property(dp->parent, (hdno == 0) ? "EDID1" : "EDID2", NULL);
+ pedid = of_get_property(dp->parent,
+ (hdno == 0) ? "EDID1" : "EDID2", NULL);
if (pedid == NULL && dp->parent && (hdno == 0))
- pedid = get_property(dp->parent, "EDID", NULL);
+ pedid = of_get_property(dp->parent, "EDID", NULL);
if (pedid == NULL)
return mt;
do {
if (!dp)
return MT_NONE;
- pname = get_property(dp, "name", NULL);
+ pname = of_get_property(dp, "name", NULL);
if (!pname)
return MT_NONE;
len = strlen(pname);
if (rinfo->of_node != NULL) {
int size;
- mrtable = get_property(rinfo->of_node, "ATY,MRT", &size);
+ mrtable = of_get_property(rinfo->of_node, "ATY,MRT", &size);
if (mrtable)
mrtable_size = size >> 2;
else
for (dp = NULL;
(dp = of_get_next_child(parent, dp)) != NULL;) {
- pname = get_property(dp, "name", NULL);
+ pname = of_get_property(dp, "name", NULL);
if (!pname)
continue;
len = strlen(pname);
if ((pname[len-1] == 'A' && conn == 1) ||
(pname[len-1] == 'B' && conn == 2)) {
for (i = 0; propnames[i] != NULL; ++i) {
- pedid = get_property(dp, propnames[i],
- NULL);
+ pedid = of_get_property(dp,
+ propnames[i], NULL);
if (pedid != NULL)
break;
}
}
if (pedid == NULL) {
for (i = 0; propnames[i] != NULL; ++i) {
- pedid = get_property(parent, propnames[i], NULL);
+ pedid = of_get_property(parent, propnames[i], NULL);
if (pedid != NULL)
break;
}
ioremap(base + 0x7ff000, 0x1000) + 0xcc0;
par->cmap_data = par->cmap_adr + 1;
par->cmap_type = cmap_m64;
- } else if (dp && (device_is_compatible(dp, "pci1014,b7") ||
- device_is_compatible(dp, "pci1014,21c"))) {
+ } else if (dp && (of_device_is_compatible(dp, "pci1014,b7") ||
+ of_device_is_compatible(dp, "pci1014,21c"))) {
par->cmap_adr = offb_map_reg(dp, 0, 0x6000, 0x1000);
if (par->cmap_adr)
par->cmap_type = cmap_gxt2000;
const u32 *pp, *addrp, *up;
u64 asize;
- pp = get_property(dp, "linux,bootx-depth", &len);
+ pp = of_get_property(dp, "linux,bootx-depth", &len);
if (pp == NULL)
- pp = get_property(dp, "depth", &len);
+ pp = of_get_property(dp, "depth", &len);
if (pp && len == sizeof(u32))
depth = *pp;
- pp = get_property(dp, "linux,bootx-width", &len);
+ pp = of_get_property(dp, "linux,bootx-width", &len);
if (pp == NULL)
- pp = get_property(dp, "width", &len);
+ pp = of_get_property(dp, "width", &len);
if (pp && len == sizeof(u32))
width = *pp;
- pp = get_property(dp, "linux,bootx-height", &len);
+ pp = of_get_property(dp, "linux,bootx-height", &len);
if (pp == NULL)
- pp = get_property(dp, "height", &len);
+ pp = of_get_property(dp, "height", &len);
if (pp && len == sizeof(u32))
height = *pp;
- pp = get_property(dp, "linux,bootx-linebytes", &len);
+ pp = of_get_property(dp, "linux,bootx-linebytes", &len);
if (pp == NULL)
- pp = get_property(dp, "linebytes", &len);
+ pp = of_get_property(dp, "linebytes", &len);
if (pp && len == sizeof(u32) && (*pp != 0xffffffffu))
pitch = *pp;
else
* ranges and pick one that is both big enough and if possible encloses
* the "address" property. If none match, we pick the biggest
*/
- up = get_property(dp, "linux,bootx-addr", &len);
+ up = of_get_property(dp, "linux,bootx-addr", &len);
if (up == NULL)
- up = get_property(dp, "address", &len);
+ up = of_get_property(dp, "address", &len);
if (up && len == sizeof(u32))
addr_prop = *up;
return -ENODEV;
/* Check if we have a MacOS display without a node spec */
- if (get_property(of_chosen, "linux,bootx-noscreen", NULL) != NULL) {
+ if (of_get_property(of_chosen, "linux,bootx-noscreen", NULL) != NULL) {
/* The old code tried to work out which node was the MacOS
* display based on the address. I'm dropping that since the
* lack of a node spec only happens with old BootX versions
}
for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) {
- if (get_property(dp, "linux,opened", NULL) &&
- get_property(dp, "linux,boot-display", NULL)) {
+ if (of_get_property(dp, "linux,opened", NULL) &&
+ of_get_property(dp, "linux,boot-display", NULL)) {
boot_disp = dp;
offb_init_nodriver(dp, 0);
}
}
for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) {
- if (get_property(dp, "linux,opened", NULL) &&
+ if (of_get_property(dp, "linux,opened", NULL) &&
dp != boot_disp)
offb_init_nodriver(dp, 0);
}
}
ps3fb.dev = dev;
- error = ps3_alloc_irq(PS3_BINDING_CPU_ANY, dinfo->irq.irq_outlet,
- &ps3fb.irq_no);
+ error = ps3_irq_plug_setup(PS3_BINDING_CPU_ANY, dinfo->irq.irq_outlet,
+ &ps3fb.irq_no);
if (error) {
printk(KERN_ERR "%s: ps3_alloc_irq failed %d\n", __func__,
error);
if (error) {
printk(KERN_ERR "%s: request_irq failed %d\n", __func__,
error);
- ps3_free_irq(ps3fb.irq_no);
+ ps3_irq_plug_destroy(ps3fb.irq_no);
return error;
}
framebuffer_release(info);
err_free_irq:
free_irq(ps3fb.irq_no, ps3fb.dev);
- ps3_free_irq(ps3fb.irq_no);
+ ps3_irq_plug_destroy(ps3fb.irq_no);
err_iounmap_dinfo:
iounmap((u8 __iomem *)ps3fb.dinfo);
err_gpu_context_free:
ps3fb_flip_ctl(0); /* flip off */
ps3fb.dinfo->irq.mask = 0;
free_irq(ps3fb.irq_no, ps3fb.dev);
- ps3_free_irq(ps3fb.irq_no);
+ ps3_irq_plug_destroy(ps3fb.irq_no);
iounmap((u8 __iomem *)ps3fb.dinfo);
}
}
if (ps3fb.irq_no) {
free_irq(ps3fb.irq_no, ps3fb.dev);
- ps3_free_irq(ps3fb.irq_no);
+ ps3_irq_plug_destroy(ps3fb.irq_no);
}
iounmap((u8 __iomem *)ps3fb.dinfo);
NVTRACE_ENTER();
dp = pci_device_to_OF_node(pd);
for (; dp != NULL; dp = dp->child) {
- disptype = get_property(dp, "display-type", NULL);
+ disptype = of_get_property(dp, "display-type", NULL);
if (disptype == NULL)
continue;
if (strncmp(disptype, "LCD", 3) != 0)
continue;
for (i = 0; propnames[i] != NULL; ++i) {
- pedid = get_property(dp, propnames[i], NULL);
+ pedid = of_get_property(dp, propnames[i], NULL);
if (pedid != NULL) {
par->EDID = (unsigned char *)pedid;
NVTRACE("LCD found.\n");
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <asm/machdep.h>
#include <asm/types.h>
#include <asm/bitops.h>
#endif
extern void alloc_dart_table(void);
+#if defined(CONFIG_PPC64) && defined(CONFIG_PM)
+static inline void iommu_save(void)
+{
+ if (ppc_md.iommu_save)
+ ppc_md.iommu_save();
+}
+
+static inline void iommu_restore(void)
+{
+ if (ppc_md.iommu_restore)
+ ppc_md.iommu_restore();
+}
+#endif
#endif /* __KERNEL__ */
#endif /* _ASM_IOMMU_H */
extern int register_die_notifier(struct notifier_block *);
extern int unregister_die_notifier(struct notifier_block *);
-extern int register_page_fault_notifier(struct notifier_block *);
-extern int unregister_page_fault_notifier(struct notifier_block *);
+
+/*
+ * These are only here because kprobes.c wants them to implement a
+ * blatant layering violation. Will hopefully go away soon once all
+ * architectures are updated.
+ */
+static inline int register_page_fault_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+static inline int unregister_page_fault_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
extern struct atomic_notifier_head powerpc_die_chain;
/* Grossly misnamed. */
DIE_DABR_MATCH,
DIE_BPT,
DIE_SSTEP,
- DIE_PAGE_FAULT,
};
static inline int notify_die(enum die_val val,char *str,struct pt_regs *regs,long err,int trap, int sig)
addr = *(kprobe_opcode_t **)addr; \
} else if (name[0] != '.') \
addr = *(kprobe_opcode_t **)addr; \
+ } else { \
+ char dot_name[KSYM_NAME_LEN+1]; \
+ dot_name[0] = '.'; \
+ dot_name[1] = '\0'; \
+ strncat(dot_name, name, KSYM_NAME_LEN); \
+ addr = (kprobe_opcode_t *)kallsyms_lookup_name(dot_name); \
} \
}
extern int kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_KPROBES_H */
void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size,
unsigned long flags);
void (*iounmap)(volatile void __iomem *token);
+
+#ifdef CONFIG_PM
+ void (*iommu_save)(void);
+ void (*iommu_restore)(void);
+#endif
#endif /* CONFIG_PPC64 */
int (*probe)(void);
};
extern void power4_idle(void);
+extern void power4_cpu_offline_powersave(void);
extern void ppc6xx_idle(void);
/*
--- /dev/null
+#ifndef _ASM_POWERPC_MMU_44X_H_
+#define _ASM_POWERPC_MMU_44X_H_
+/*
+ * PPC440 support
+ */
+
+#define PPC44x_MMUCR_TID 0x000000ff
+#define PPC44x_MMUCR_STS 0x00010000
+
+#define PPC44x_TLB_PAGEID 0
+#define PPC44x_TLB_XLAT 1
+#define PPC44x_TLB_ATTRIB 2
+
+/* Page identification fields */
+#define PPC44x_TLB_EPN_MASK 0xfffffc00 /* Effective Page Number */
+#define PPC44x_TLB_VALID 0x00000200 /* Valid flag */
+#define PPC44x_TLB_TS 0x00000100 /* Translation address space */
+#define PPC44x_TLB_1K 0x00000000 /* Page sizes */
+#define PPC44x_TLB_4K 0x00000010
+#define PPC44x_TLB_16K 0x00000020
+#define PPC44x_TLB_64K 0x00000030
+#define PPC44x_TLB_256K 0x00000040
+#define PPC44x_TLB_1M 0x00000050
+#define PPC44x_TLB_16M 0x00000070
+#define PPC44x_TLB_256M 0x00000090
+
+/* Translation fields */
+#define PPC44x_TLB_RPN_MASK 0xfffffc00 /* Real Page Number */
+#define PPC44x_TLB_ERPN_MASK 0x0000000f
+
+/* Storage attribute and access control fields */
+#define PPC44x_TLB_ATTR_MASK 0x0000ff80
+#define PPC44x_TLB_U0 0x00008000 /* User 0 */
+#define PPC44x_TLB_U1 0x00004000 /* User 1 */
+#define PPC44x_TLB_U2 0x00002000 /* User 2 */
+#define PPC44x_TLB_U3 0x00001000 /* User 3 */
+#define PPC44x_TLB_W 0x00000800 /* Caching is write-through */
+#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */
+#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */
+#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */
+#define PPC44x_TLB_E 0x00000080 /* Memory is guarded */
+
+#define PPC44x_TLB_PERM_MASK 0x0000003f
+#define PPC44x_TLB_UX 0x00000020 /* User execution */
+#define PPC44x_TLB_UW 0x00000010 /* User write */
+#define PPC44x_TLB_UR 0x00000008 /* User read */
+#define PPC44x_TLB_SX 0x00000004 /* Super execution */
+#define PPC44x_TLB_SW 0x00000002 /* Super write */
+#define PPC44x_TLB_SR 0x00000001 /* Super read */
+
+/* Number of TLB entries */
+#define PPC44x_TLB_SIZE 64
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long long phys_addr_t;
+
+extern phys_addr_t fixup_bigphys_addr(phys_addr_t, phys_addr_t);
+
+typedef struct {
+ unsigned long id;
+ unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#define PPC44x_EARLY_TLBS 1
+
+/* Size of the TLBs used for pinning in lowmem */
+#define PPC_PIN_SIZE (1 << 28) /* 256M */
+
+#endif /* _ASM_POWERPC_MMU_44X_H_ */
#ifdef CONFIG_PPC64
/* 64-bit classic hash table MMU */
# include <asm/mmu-hash64.h>
+#elif defined(CONFIG_44x)
+/* 44x-style software loaded TLB */
+# include <asm/mmu-44x.h>
#else
-/* 32-bit. FIXME: split up the 32-bit MMU types, and revise for
- * arch/powerpc */
+/* Other 32-bit. FIXME: split up the other 32-bit MMU types, and
+ * revise for arch/powerpc */
# include <asm-ppc/mmu.h>
#endif
#endif /* __ASSEMBLY__ */
+#ifdef CONFIG_PM
+struct mpc52xx_suspend {
+ void (*board_suspend_prepare)(void __iomem *mbar);
+ void (*board_resume_finish)(void __iomem *mbar);
+};
+
+extern struct mpc52xx_suspend mpc52xx_suspend;
+extern int __init mpc52xx_pm_init(void);
+extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level);
+#endif /* CONFIG_PM */
+
#endif /* __ASM_POWERPC_MPC52xx_H__ */
#ifdef __KERNEL__
#include <linux/irq.h>
+#include <linux/sysdev.h>
#include <asm/dcr.h>
/*
#endif /* CONFIG_PPC_DCR */
};
+struct mpic_irq_save {
+ u32 vecprio,
+ dest;
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+ u32 fixup_data;
+#endif
+};
+
/* The instance data of a given MPIC */
struct mpic
{
/* link */
struct mpic *next;
+
+ struct sys_device sysdev;
+
+#ifdef CONFIG_PM
+ struct mpic_irq_save *save_data;
+#endif
};
/*
extern void of_device_unregister(struct of_device *ofdev);
extern void of_release_dev(struct device *dev);
+extern ssize_t of_device_get_modalias(struct of_device *ofdev,
+ char *str, ssize_t len);
extern int of_device_uevent(struct device *dev,
char **envp, int num_envp, char *buffer, int buffer_size);
#define __pmd(x) ((pmd_t) { (x) })
/* PUD level exusts only on 4k pages */
-#ifndef CONFIG_PPC_64K_PAGES
+#if defined(CONFIG_PPC64) && !defined(CONFIG_PPC_64K_PAGES)
typedef struct { unsigned long pud; } pud_t;
#define pud_val(x) ((x).pud)
#define __pud(x) ((pud_t) { (x) })
#ifdef CONFIG_PTE_64BIT
typedef unsigned long long pte_basic_t;
#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */
-#define PTE_FMT "%16Lx"
#else
typedef unsigned long pte_basic_t;
#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */
-#define PTE_FMT "%.8lx"
#endif
struct page;
--- /dev/null
+#ifndef _ASM_POWERPC_PGALLOC_32_H
+#define _ASM_POWERPC_PGALLOC_32_H
+
+#include <linux/threads.h>
+
+extern void __bad_pte(pmd_t *pmd);
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+extern void pgd_free(pgd_t *pgd);
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); })
+#define pmd_free(x) do { } while (0)
+#define __pmd_free_tlb(tlb,x) do { } while (0)
+#define pgd_populate(mm, pmd, pte) BUG()
+
+#ifndef CONFIG_BOOKE
+#define pmd_populate_kernel(mm, pmd, pte) \
+ (pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte) \
+ (pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+#else
+#define pmd_populate_kernel(mm, pmd, pte) \
+ (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte) \
+ (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
+#endif
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+extern struct page *pte_alloc_one(struct mm_struct *mm, unsigned long addr);
+extern void pte_free_kernel(pte_t *pte);
+extern void pte_free(struct page *pte);
+
+#define __pte_free_tlb(tlb, pte) pte_free((pte))
+
+#define check_pgt_cache() do { } while (0)
+
+#endif /* _ASM_POWERPC_PGALLOC_32_H */
--- /dev/null
+#ifndef _ASM_POWERPC_PGALLOC_64_H
+#define _ASM_POWERPC_PGALLOC_64_H
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/cpumask.h>
+#include <linux/percpu.h>
+
+extern struct kmem_cache *pgtable_cache[];
+
+#ifdef CONFIG_PPC_64K_PAGES
+#define PTE_CACHE_NUM 0
+#define PMD_CACHE_NUM 1
+#define PGD_CACHE_NUM 2
+#define HUGEPTE_CACHE_NUM 3
+#else
+#define PTE_CACHE_NUM 0
+#define PMD_CACHE_NUM 1
+#define PUD_CACHE_NUM 1
+#define PGD_CACHE_NUM 0
+#define HUGEPTE_CACHE_NUM 2
+#endif
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL);
+}
+
+static inline void pgd_free(pgd_t *pgd)
+{
+ kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd);
+}
+
+#ifndef CONFIG_PPC_64K_PAGES
+
+#define pgd_populate(MM, PGD, PUD) pgd_set(PGD, PUD)
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+ return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM],
+ GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pud_free(pud_t *pud)
+{
+ kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+ pud_set(pud, (unsigned long)pmd);
+}
+
+#define pmd_populate(mm, pmd, pte_page) \
+ pmd_populate_kernel(mm, pmd, page_address(pte_page))
+#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte))
+
+
+#else /* CONFIG_PPC_64K_PAGES */
+
+#define pud_populate(mm, pud, pmd) pud_set(pud, (unsigned long)pmd)
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+ pte_t *pte)
+{
+ pmd_set(pmd, (unsigned long)pte);
+}
+
+#define pmd_populate(mm, pmd, pte_page) \
+ pmd_populate_kernel(mm, pmd, page_address(pte_page))
+
+#endif /* CONFIG_PPC_64K_PAGES */
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+ return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM],
+ GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pmd_free(pmd_t *pmd)
+{
+ kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+{
+ return kmem_cache_alloc(pgtable_cache[PTE_CACHE_NUM],
+ GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
+{
+ return virt_to_page(pte_alloc_one_kernel(mm, address));
+}
+
+static inline void pte_free_kernel(pte_t *pte)
+{
+ kmem_cache_free(pgtable_cache[PTE_CACHE_NUM], pte);
+}
+
+static inline void pte_free(struct page *ptepage)
+{
+ pte_free_kernel(page_address(ptepage));
+}
+
+#define PGF_CACHENUM_MASK 0x3
+
+typedef struct pgtable_free {
+ unsigned long val;
+} pgtable_free_t;
+
+static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
+ unsigned long mask)
+{
+ BUG_ON(cachenum > PGF_CACHENUM_MASK);
+
+ return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
+}
+
+static inline void pgtable_free(pgtable_free_t pgf)
+{
+ void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
+ int cachenum = pgf.val & PGF_CACHENUM_MASK;
+
+ kmem_cache_free(pgtable_cache[cachenum], p);
+}
+
+extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
+
+#define __pte_free_tlb(tlb, ptepage) \
+ pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
+ PTE_CACHE_NUM, PTE_TABLE_SIZE-1))
+#define __pmd_free_tlb(tlb, pmd) \
+ pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
+ PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
+#ifndef CONFIG_PPC_64K_PAGES
+#define __pud_free_tlb(tlb, pud) \
+ pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
+ PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
+#endif /* CONFIG_PPC_64K_PAGES */
+
+#define check_pgt_cache() do { } while (0)
+
+#endif /* _ASM_POWERPC_PGALLOC_64_H */
#define _ASM_POWERPC_PGALLOC_H
#ifdef __KERNEL__
-#ifndef CONFIG_PPC64
-#include <asm-ppc/pgalloc.h>
+#ifdef CONFIG_PPC64
+#include <asm/pgalloc-64.h>
#else
-
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/cpumask.h>
-#include <linux/percpu.h>
-
-extern struct kmem_cache *pgtable_cache[];
-
-#ifdef CONFIG_PPC_64K_PAGES
-#define PTE_CACHE_NUM 0
-#define PMD_CACHE_NUM 1
-#define PGD_CACHE_NUM 2
-#define HUGEPTE_CACHE_NUM 3
-#else
-#define PTE_CACHE_NUM 0
-#define PMD_CACHE_NUM 1
-#define PUD_CACHE_NUM 1
-#define PGD_CACHE_NUM 0
-#define HUGEPTE_CACHE_NUM 2
+#include <asm/pgalloc-32.h>
#endif
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
-{
- return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL);
-}
-
-static inline void pgd_free(pgd_t *pgd)
-{
- kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd);
-}
-
-#ifndef CONFIG_PPC_64K_PAGES
-
-#define pgd_populate(MM, PGD, PUD) pgd_set(PGD, PUD)
-
-static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
- return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM],
- GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline void pud_free(pud_t *pud)
-{
- kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud);
-}
-
-static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
-{
- pud_set(pud, (unsigned long)pmd);
-}
-
-#define pmd_populate(mm, pmd, pte_page) \
- pmd_populate_kernel(mm, pmd, page_address(pte_page))
-#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte))
-
-
-#else /* CONFIG_PPC_64K_PAGES */
-
-#define pud_populate(mm, pud, pmd) pud_set(pud, (unsigned long)pmd)
-
-static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
- pte_t *pte)
-{
- pmd_set(pmd, (unsigned long)pte);
-}
-
-#define pmd_populate(mm, pmd, pte_page) \
- pmd_populate_kernel(mm, pmd, page_address(pte_page))
-
-#endif /* CONFIG_PPC_64K_PAGES */
-
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
- return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM],
- GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline void pmd_free(pmd_t *pmd)
-{
- kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd);
-}
-
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
- unsigned long address)
-{
- return kmem_cache_alloc(pgtable_cache[PTE_CACHE_NUM],
- GFP_KERNEL|__GFP_REPEAT);
-}
-
-static inline struct page *pte_alloc_one(struct mm_struct *mm,
- unsigned long address)
-{
- return virt_to_page(pte_alloc_one_kernel(mm, address));
-}
-
-static inline void pte_free_kernel(pte_t *pte)
-{
- kmem_cache_free(pgtable_cache[PTE_CACHE_NUM], pte);
-}
-
-static inline void pte_free(struct page *ptepage)
-{
- pte_free_kernel(page_address(ptepage));
-}
-
-#define PGF_CACHENUM_MASK 0x3
-
-typedef struct pgtable_free {
- unsigned long val;
-} pgtable_free_t;
-
-static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
- unsigned long mask)
-{
- BUG_ON(cachenum > PGF_CACHENUM_MASK);
-
- return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
-}
-
-static inline void pgtable_free(pgtable_free_t pgf)
-{
- void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
- int cachenum = pgf.val & PGF_CACHENUM_MASK;
-
- kmem_cache_free(pgtable_cache[cachenum], p);
-}
-
-extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
-
-#define __pte_free_tlb(tlb, ptepage) \
- pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
- PTE_CACHE_NUM, PTE_TABLE_SIZE-1))
-#define __pmd_free_tlb(tlb, pmd) \
- pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
- PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
-#ifndef CONFIG_PPC_64K_PAGES
-#define __pud_free_tlb(tlb, pud) \
- pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
- PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
-#endif /* CONFIG_PPC_64K_PAGES */
-
-#define check_pgt_cache() do { } while (0)
-
-#endif /* CONFIG_PPC64 */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PGALLOC_H */
+#ifndef _ASM_POWERPC_PGTABLE_4K_H
+#define _ASM_POWERPC_PGTABLE_4K_H
/*
* Entries per page directory level. The PTE level must use a 64b record
* for each page table entry. The PMD and PGD level use a 32b record for
#define remap_4k_pfn(vma, addr, pfn, prot) \
remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
+#endif /* _ASM_POWERPC_PGTABLE_4K_H */
#ifndef _ASM_POWERPC_PGTABLE_64K_H
#define _ASM_POWERPC_PGTABLE_64K_H
-#ifdef __KERNEL__
#include <asm-generic/pgtable-nopud.h>
/* Bits to mask out from a PGD/PUD to get to the PMD page */
#define PUD_MASKED_BITS 0x1ff
-#ifndef __ASSEMBLY__
-
/* Manipulate "rpte" values */
#define __real_pte(e,p) ((real_pte_t) { \
(e), pte_val(*((p) + PTRS_PER_PTE)) })
remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \
__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PGTABLE_64K_H */
--- /dev/null
+#ifndef _ASM_POWERPC_PGTABLE_PPC32_H
+#define _ASM_POWERPC_PGTABLE_PPC32_H
+
+#include <asm-generic/4level-fixup.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/processor.h> /* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/io.h> /* For sub-arch specific PPC_PIN_SIZE */
+struct mm_struct;
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+extern unsigned long ioremap_bot, ioremap_base;
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The PowerPC MMU uses a hash table containing PTEs, together with
+ * a set of 16 segment registers (on 32-bit implementations), to define
+ * the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings. We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code. Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
+ * We also use the two level tables, but we can put the real bits in them
+ * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0,
+ * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has
+ * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
+ * based upon user/super access. The TLB does not have accessed nor write
+ * protect. We assume that if the TLB get loaded with an entry it is
+ * accessed, and overload the changed bit for write protect. We use
+ * two bits in the software pte that are supposed to be set to zero in
+ * the TLB entry (24 and 25) for these indicators. Although the level 1
+ * descriptor contains the guarded and writethrough/copyback bits, we can
+ * set these at the page level since they get copied from the Mx_TWC
+ * register when the TLB entry is loaded. We will use bit 27 for guard, since
+ * that is where it exists in the MD_TWC, and bit 26 for writethrough.
+ * These will get masked from the level 2 descriptor at TLB load time, and
+ * copied to the MD_TWC before it gets loaded.
+ * Large page sizes added. We currently support two sizes, 4K and 8M.
+ * This also allows a TLB hander optimization because we can directly
+ * load the PMD into MD_TWC. The 8M pages are only used for kernel
+ * mapping of well known areas. The PMD (PGD) entries contain control
+ * flags in addition to the address, so care must be taken that the
+ * software no longer assumes these are only pointers.
+ */
+
+/*
+ * At present, all PowerPC 400-class processors share a similar TLB
+ * architecture. The instruction and data sides share a unified,
+ * 64-entry, fully-associative TLB which is maintained totally under
+ * software control. In addition, the instruction side has a
+ * hardware-managed, 4-entry, fully-associative TLB which serves as a
+ * first level to the shared TLB. These two TLBs are known as the UTLB
+ * and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
+ *
+ * For any >32-bit physical address platform, we can use the following
+ * two level page table layout where the pgdir is 8KB and the MS 13 bits
+ * are an index to the second level table. The combined pgdir/pmd first
+ * level has 2048 entries and the second level has 512 64-bit PTE entries.
+ * -Matt
+ */
+/* PMD_SHIFT determines the size of the area mapped by the PTE pages */
+#define PMD_SHIFT (PAGE_SHIFT + PTE_SHIFT)
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT PMD_SHIFT
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#define PTRS_PER_PTE (1 << PTE_SHIFT)
+#define PTRS_PER_PMD 1
+#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS 0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
+ (unsigned long long)pte_val(e))
+#define pmd_ERROR(e) \
+ printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 64MB value just means that there will be a 64MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * We no longer map larger than phys RAM with the BATs so we don't have
+ * to worry about the VMALLOC_OFFSET causing problems. We do have to worry
+ * about clashes between our early calls to ioremap() that start growing down
+ * from ioremap_base being run into the VM area allocations (growing upwards
+ * from VMALLOC_START). For this reason we have ioremap_bot to check when
+ * we actually run into our mappings setup in the early boot with the VM
+ * system. This really does become a problem for machines with good amounts
+ * of RAM. -- Cort
+ */
+#define VMALLOC_OFFSET (0x1000000) /* 16M */
+#ifdef PPC_PIN_SIZE
+#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#else
+#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#endif
+#define VMALLOC_END ioremap_bot
+
+/*
+ * Bits in a linux-style PTE. These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible.
+ */
+
+#if defined(CONFIG_40x)
+
+/* There are several potential gotchas here. The 40x hardware TLBLO
+ field looks like this:
+
+ 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ RPN..................... 0 0 EX WR ZSEL....... W I M G
+
+ Where possible we make the Linux PTE bits match up with this
+
+ - bits 20 and 21 must be cleared, because we use 4k pages (40x can
+ support down to 1k pages), this is done in the TLBMiss exception
+ handler.
+ - We use only zones 0 (for kernel pages) and 1 (for user pages)
+ of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
+ miss handler. Bit 27 is PAGE_USER, thus selecting the correct
+ zone.
+ - PRESENT *must* be in the bottom two bits because swap cache
+ entries use the top 30 bits. Because 40x doesn't support SMP
+ anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
+ is cleared in the TLB miss handler before the TLB entry is loaded.
+ - All other bits of the PTE are loaded into TLBLO without
+ modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+ software PTE bits. We actually use use bits 21, 24, 25, and
+ 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+ PRESENT.
+*/
+
+/* Definitions for 40x embedded chips. */
+#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
+#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
+#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
+#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
+#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
+#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
+#define _PAGE_RW 0x040 /* software: Writes permitted */
+#define _PAGE_DIRTY 0x080 /* software: dirty page */
+#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
+#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
+
+#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
+#define _PMD_BAD 0x802
+#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
+#define _PMD_SIZE_4M 0x0c0
+#define _PMD_SIZE_16M 0x0e0
+#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
+
+#elif defined(CONFIG_44x)
+/*
+ * Definitions for PPC440
+ *
+ * Because of the 3 word TLB entries to support 36-bit addressing,
+ * the attribute are difficult to map in such a fashion that they
+ * are easily loaded during exception processing. I decided to
+ * organize the entry so the ERPN is the only portion in the
+ * upper word of the PTE and the attribute bits below are packed
+ * in as sensibly as they can be in the area below a 4KB page size
+ * oriented RPN. This at least makes it easy to load the RPN and
+ * ERPN fields in the TLB. -Matt
+ *
+ * Note that these bits preclude future use of a page size
+ * less than 4KB.
+ *
+ *
+ * PPC 440 core has following TLB attribute fields;
+ *
+ * TLB1:
+ * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * RPN................................. - - - - - - ERPN.......
+ *
+ * TLB2:
+ * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
+ *
+ * There are some constrains and options, to decide mapping software bits
+ * into TLB entry.
+ *
+ * - PRESENT *must* be in the bottom three bits because swap cache
+ * entries use the top 29 bits for TLB2.
+ *
+ * - FILE *must* be in the bottom three bits because swap cache
+ * entries use the top 29 bits for TLB2.
+ *
+ * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
+ * doesn't support SMP. So we can use this as software bit, like
+ * DIRTY.
+ *
+ * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
+ * for memory protection related functions (see PTE structure in
+ * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the
+ * above bits. Note that the bit values are CPU specific, not architecture
+ * specific.
+ *
+ * The kernel PTE entry holds an arch-dependent swp_entry structure under
+ * certain situations. In other words, in such situations some portion of
+ * the PTE bits are used as a swp_entry. In the PPC implementation, the
+ * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
+ * hold protection values. That means the three protection bits are
+ * reserved for both PTE and SWAP entry at the most significant three
+ * LSBs.
+ *
+ * There are three protection bits available for SWAP entry:
+ * _PAGE_PRESENT
+ * _PAGE_FILE
+ * _PAGE_HASHPTE (if HW has)
+ *
+ * So those three bits have to be inside of 0-2nd LSB of PTE.
+ *
+ */
+
+#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
+#define _PAGE_RW 0x00000002 /* S: Write permission */
+#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
+#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
+#define _PAGE_HWWRITE 0x00000010 /* H: Dirty & RW */
+#define _PAGE_HWEXEC 0x00000020 /* H: Execute permission */
+#define _PAGE_USER 0x00000040 /* S: User page */
+#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
+#define _PAGE_GUARDED 0x00000100 /* H: G bit */
+#define _PAGE_DIRTY 0x00000200 /* S: Page dirty */
+#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
+#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
+
+/* TODO: Add large page lowmem mapping support */
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK 0xffffffff00000000ULL
+
+#elif defined(CONFIG_FSL_BOOKE)
+/*
+ MMU Assist Register 3:
+
+ 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
+ RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR
+
+ - PRESENT *must* be in the bottom three bits because swap cache
+ entries use the top 29 bits.
+
+ - FILE *must* be in the bottom three bits because swap cache
+ entries use the top 29 bits.
+*/
+
+/* Definitions for FSL Book-E Cores */
+#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */
+#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */
+#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */
+#define _PAGE_ACCESSED 0x00004 /* S: Page referenced */
+#define _PAGE_HWWRITE 0x00008 /* H: Dirty & RW, set in exception */
+#define _PAGE_RW 0x00010 /* S: Write permission */
+#define _PAGE_HWEXEC 0x00020 /* H: UX permission */
+
+#define _PAGE_ENDIAN 0x00040 /* H: E bit */
+#define _PAGE_GUARDED 0x00080 /* H: G bit */
+#define _PAGE_COHERENT 0x00100 /* H: M bit */
+#define _PAGE_NO_CACHE 0x00200 /* H: I bit */
+#define _PAGE_WRITETHRU 0x00400 /* H: W bit */
+
+#ifdef CONFIG_PTE_64BIT
+#define _PAGE_DIRTY 0x08000 /* S: Page dirty */
+
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK 0xffffffffffff0000ULL
+#else
+#define _PAGE_DIRTY 0x00800 /* S: Page dirty */
+#endif
+
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+
+#elif defined(CONFIG_8xx)
+/* Definitions for 8xx embedded chips. */
+#define _PAGE_PRESENT 0x0001 /* Page is valid */
+#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
+#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
+#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
+
+/* These five software bits must be masked out when the entry is loaded
+ * into the TLB.
+ */
+#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
+#define _PAGE_GUARDED 0x0010 /* software: guarded access */
+#define _PAGE_DIRTY 0x0020 /* software: page changed */
+#define _PAGE_RW 0x0040 /* software: user write access allowed */
+#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
+
+/* Setting any bits in the nibble with the follow two controls will
+ * require a TLB exception handler change. It is assumed unused bits
+ * are always zero.
+ */
+#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
+#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
+
+#define _PMD_PRESENT 0x0001
+#define _PMD_BAD 0x0ff0
+#define _PMD_PAGE_MASK 0x000c
+#define _PMD_PAGE_8M 0x000c
+
+/*
+ * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
+ * for an address even if _PAGE_PRESENT is not set, as a performance
+ * optimization. This is a bug if you ever want to use swap unless
+ * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
+ * definitions for __swp_entry etc. below, which would be gross.
+ * -- paulus
+ */
+#define _PTE_NONE_MASK _PAGE_ACCESSED
+
+#else /* CONFIG_6xx */
+/* Definitions for 60x, 740/750, etc. */
+#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
+#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
+#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */
+#define _PAGE_USER 0x004 /* usermode access allowed */
+#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
+#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
+#define _PAGE_DIRTY 0x080 /* C: page changed */
+#define _PAGE_ACCESSED 0x100 /* R: page referenced */
+#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
+#define _PAGE_RW 0x400 /* software: user write access allowed */
+
+#define _PTE_NONE_MASK _PAGE_HASHPTE
+
+#define _PMD_PRESENT 0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD (~PAGE_MASK)
+#endif
+
+/*
+ * Some bits are only used on some cpu families...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE 0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK 0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED 0
+#endif
+#ifndef _PAGE_HWWRITE
+#define _PAGE_HWWRITE 0
+#endif
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC 0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC 0
+#endif
+#ifndef _PMD_PRESENT_MASK
+#define _PMD_PRESENT_MASK _PMD_PRESENT
+#endif
+#ifndef _PMD_SIZE
+#define _PMD_SIZE 0
+#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
+#endif
+
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose. -- paulus.
+ */
+
+#ifdef CONFIG_44x
+#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
+#else
+#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
+#endif
+#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
+
+#ifdef CONFIG_PPC_STD_MMU
+/* On standard PPC MMU, no user access implies kernel read/write access,
+ * so to write-protect kernel memory we must turn on user access */
+#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
+#else
+#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED)
+#endif
+
+#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
+
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
+/* We want the debuggers to be able to set breakpoints anywhere, so
+ * don't write protect the kernel text */
+#define _PAGE_RAM_TEXT _PAGE_RAM
+#else
+#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC)
+#endif
+
+#define PAGE_NONE __pgprot(_PAGE_BASE)
+#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL __pgprot(_PAGE_RAM)
+#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO)
+
+/*
+ * The PowerPC can only do execute protection on a segment (256MB) basis,
+ * not on a page basis. So we consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY_X
+#define __P010 PAGE_COPY
+#define __P011 PAGE_COPY_X
+#define __P100 PAGE_READONLY
+#define __P101 PAGE_READONLY_X
+#define __P110 PAGE_COPY
+#define __P111 PAGE_COPY_X
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY_X
+#define __S010 PAGE_SHARED
+#define __S011 PAGE_SHARED_X
+#define __S100 PAGE_READONLY
+#define __S101 PAGE_READONLY_X
+#define __S110 PAGE_SHARED
+#define __S111 PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
+ * kernel without large page PMD support */
+extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
+
+/*
+ * Conversions between PTE values and page frame numbers.
+ */
+
+/* in some case we want to additionaly adjust where the pfn is in the pte to
+ * allow room for more flags */
+#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
+#define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8)
+#else
+#define PFN_SHIFT_OFFSET (PAGE_SHIFT)
+#endif
+
+#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET)
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
+ pgprot_val(prot))
+#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[1024];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* __ASSEMBLY__ */
+
+#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd) (!pmd_val(pmd))
+#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD)
+#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK)
+#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#ifndef __ASSEMBLY__
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd) { return 0; }
+static inline int pgd_bad(pgd_t pgd) { return 0; }
+static inline int pgd_present(pgd_t pgd) { return 1; }
+#define pgd_clear(xp) do { } while (0)
+
+#define pgd_page_vaddr(pgd) \
+ ((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
+static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_rdprotect(pte_t pte) {
+ pte_val(pte) &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) {
+ pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_exprotect(pte_t pte) {
+ pte_val(pte) &= ~_PAGE_EXEC; return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+ pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte) {
+ pte_val(pte) |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) {
+ pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) {
+ pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+ return pte;
+}
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry. flush_hash_pages is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_pages(unsigned context, unsigned long va,
+ unsigned long pmdval, int count);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va,
+ unsigned long pmdval);
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value. In the 64-bit PTE case we lock around the
+ * low PTE word since we expect ALL flag bits to be there
+ */
+#ifndef CONFIG_PTE_64BIT
+static inline unsigned long pte_update(pte_t *p, unsigned long clr,
+ unsigned long set)
+{
+ unsigned long old, tmp;
+
+ __asm__ __volatile__("\
+1: lwarx %0,0,%3\n\
+ andc %1,%0,%4\n\
+ or %1,%1,%5\n"
+ PPC405_ERR77(0,%3)
+" stwcx. %1,0,%3\n\
+ bne- 1b"
+ : "=&r" (old), "=&r" (tmp), "=m" (*p)
+ : "r" (p), "r" (clr), "r" (set), "m" (*p)
+ : "cc" );
+ return old;
+}
+#else
+static inline unsigned long long pte_update(pte_t *p, unsigned long clr,
+ unsigned long set)
+{
+ unsigned long long old;
+ unsigned long tmp;
+
+ __asm__ __volatile__("\
+1: lwarx %L0,0,%4\n\
+ lwzx %0,0,%3\n\
+ andc %1,%L0,%5\n\
+ or %1,%1,%6\n"
+ PPC405_ERR77(0,%3)
+" stwcx. %1,0,%4\n\
+ bne- 1b"
+ : "=&r" (old), "=&r" (tmp), "=m" (*p)
+ : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
+ : "cc" );
+ return old;
+}
+#endif
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ * On machines which use an MMU hash table we avoid changing the
+ * _PAGE_HASHPTE bit.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+#if _PAGE_HASHPTE != 0
+ pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
+#else
+ *ptep = pte;
+#endif
+}
+
+/*
+ * 2.6 calles this without flushing the TLB entry, this is wrong
+ * for our hash-based implementation, we fix that up here
+ */
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
+{
+ unsigned long old;
+ old = pte_update(ptep, _PAGE_ACCESSED, 0);
+#if _PAGE_HASHPTE != 0
+ if (old & _PAGE_HASHPTE) {
+ unsigned long ptephys = __pa(ptep) & PAGE_MASK;
+ flush_hash_pages(context, addr, ptephys, 1);
+ }
+#endif
+ return (old & _PAGE_ACCESSED) != 0;
+}
+#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
+ __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+static inline int ptep_test_and_clear_dirty(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep)
+{
+ return (pte_update(ptep, (_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0;
+}
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+{
+ unsigned long bits = pte_val(entry) &
+ (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
+ pte_update(ptep, 0, bits);
+}
+
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+ do { \
+ __ptep_set_access_flags(__ptep, __entry, __dirty); \
+ flush_tlb_page_nohash(__vma, __address); \
+ } while(0)
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
+
+/*
+ * Note that on Book E processors, the pmd contains the kernel virtual
+ * (lowmem) address of the pte page. The physical address is less useful
+ * because everything runs with translation enabled (even the TLB miss
+ * handler). On everything else the pmd contains the physical address
+ * of the pte page. -- paulus
+ */
+#ifndef CONFIG_BOOKE
+#define pmd_page_vaddr(pmd) \
+ ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd) \
+ (mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
+#else
+#define pmd_page_vaddr(pmd) \
+ ((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd) \
+ (mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+#endif
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+{
+ return (pmd_t *) dir;
+}
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address) \
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr) \
+ ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr) \
+ ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
+#define pte_offset_map_nested(dir, addr) \
+ ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
+
+#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+extern void paging_init(void);
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
+ *_PAGE_HASHPTE bit (if used). -- paulus
+ */
+#define __swp_type(entry) ((entry).val & 0x1f)
+#define __swp_offset(entry) ((entry).val >> 5)
+#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 })
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS 29
+#define pte_to_pgoff(pte) (pte_val(pte) >> 3)
+#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE })
+
+/* CONFIG_APUS */
+/* For virtual address to physical address conversion */
+extern void cache_clear(__u32 addr, int length);
+extern void cache_push(__u32 addr, int length);
+extern int mm_end_of_chunk (unsigned long addr, int len);
+extern unsigned long iopa(unsigned long addr);
+extern unsigned long mm_ptov(unsigned long addr) __attribute_const__;
+
+/* Values for nocacheflag and cmode */
+/* These are not used by the APUS kernel_map, but prevents
+ compilation errors. */
+#define KERNELMAP_FULL_CACHING 0
+#define KERNELMAP_NOCACHE_SER 1
+#define KERNELMAP_NOCACHE_NONSER 2
+#define KERNELMAP_NO_COPYBACK 3
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
+ int nocacheflag, unsigned long *memavailp );
+
+/*
+ * Set cache mode of (kernel space) address range.
+ */
+extern void kernel_set_cachemode (unsigned long address, unsigned long size,
+ unsigned int cmode);
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) (1)
+
+#ifdef CONFIG_PHYS_64BIT
+extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
+ unsigned long paddr, unsigned long size, pgprot_t prot);
+
+static inline int io_remap_pfn_range(struct vm_area_struct *vma,
+ unsigned long vaddr,
+ unsigned long pfn,
+ unsigned long size,
+ pgprot_t prot)
+{
+ phys_addr_t paddr64 = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+ return remap_pfn_range(vma, vaddr, paddr64 >> PAGE_SHIFT, size, prot);
+}
+#else
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+#endif
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init() do { } while (0)
+
+extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
+ pmd_t **pmdp);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */
--- /dev/null
+#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_
+#define _ASM_POWERPC_PGTABLE_PPC64_H_
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the ppc64 hashed page table.
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+#include <asm/processor.h> /* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+struct mm_struct;
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_PPC_64K_PAGES
+#include <asm/pgtable-64k.h>
+#else
+#include <asm/pgtable-4k.h>
+#endif
+
+#define FIRST_USER_ADDRESS 0
+
+/*
+ * Size of EA range mapped by our pagetables.
+ */
+#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
+ PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
+#define PGTABLE_RANGE (1UL << PGTABLE_EADDR_SIZE)
+
+#if TASK_SIZE_USER64 > PGTABLE_RANGE
+#error TASK_SIZE_USER64 exceeds pagetable range
+#endif
+
+#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#error TASK_SIZE_USER64 exceeds user VSID range
+#endif
+
+/*
+ * Define the address range of the vmalloc VM area.
+ */
+#define VMALLOC_START ASM_CONST(0xD000000000000000)
+#define VMALLOC_SIZE ASM_CONST(0x80000000000)
+#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE)
+
+/*
+ * Define the address range of the imalloc VM area.
+ */
+#define PHBS_IO_BASE VMALLOC_END
+#define IMALLOC_BASE (PHBS_IO_BASE + 0x80000000ul) /* Reserve 2 gigs for PHBs */
+#define IMALLOC_END (VMALLOC_START + PGTABLE_RANGE)
+
+/*
+ * Region IDs
+ */
+#define REGION_SHIFT 60UL
+#define REGION_MASK (0xfUL << REGION_SHIFT)
+#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT)
+
+#define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START))
+#define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET))
+#define USER_REGION_ID (0UL)
+
+/*
+ * Common bits in a linux-style PTE. These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible. Additional
+ * bits may be defined in pgtable-*.h
+ */
+#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */
+#define _PAGE_USER 0x0002 /* matches one of the PP bits */
+#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */
+#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */
+#define _PAGE_GUARDED 0x0008
+#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */
+#define _PAGE_DIRTY 0x0080 /* C: page changed */
+#define _PAGE_ACCESSED 0x0100 /* R: page referenced */
+#define _PAGE_RW 0x0200 /* software: user write access allowed */
+#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */
+#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */
+
+#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
+
+#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY)
+
+/* __pgprot defined in asm-powerpc/page.h */
+#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
+
+#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
+#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_WRENABLE)
+#define PAGE_KERNEL_CI __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+ _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC)
+
+#define PAGE_AGP __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
+#define HAVE_PAGE_AGP
+
+/* PTEIDX nibble */
+#define _PTEIDX_SECONDARY 0x8
+#define _PTEIDX_GROUP_IX 0x7
+
+
+/*
+ * POWER4 and newer have per page execute protection, older chips can only
+ * do this on a segment (256MB) basis.
+ *
+ * Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ *
+ * Note due to the way vm flags are laid out, the bits are XWR
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY
+#define __P010 PAGE_COPY
+#define __P011 PAGE_COPY
+#define __P100 PAGE_READONLY_X
+#define __P101 PAGE_READONLY_X
+#define __P110 PAGE_COPY_X
+#define __P111 PAGE_COPY_X
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY
+#define __S010 PAGE_SHARED
+#define __S011 PAGE_SHARED
+#define __S100 PAGE_READONLY_X
+#define __S101 PAGE_READONLY_X
+#define __S110 PAGE_SHARED_X
+#define __S111 PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * mk_pte takes a (struct page *) as input
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
+{
+ pte_t pte;
+
+
+ pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot);
+ return pte;
+}
+
+#define pte_modify(_pte, newprot) \
+ (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)))
+
+#define pte_none(pte) ((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0)
+#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
+
+/* pte_clear moved to later in this file */
+
+#define pte_pfn(x) ((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT)))
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+#define PMD_BAD_BITS (PTE_TABLE_SIZE-1)
+#define PUD_BAD_BITS (PMD_TABLE_SIZE-1)
+
+#define pmd_set(pmdp, pmdval) (pmd_val(*(pmdp)) = (pmdval))
+#define pmd_none(pmd) (!pmd_val(pmd))
+#define pmd_bad(pmd) (!is_kernel_addr(pmd_val(pmd)) \
+ || (pmd_val(pmd) & PMD_BAD_BITS))
+#define pmd_present(pmd) (pmd_val(pmd) != 0)
+#define pmd_clear(pmdp) (pmd_val(*(pmdp)) = 0)
+#define pmd_page_vaddr(pmd) (pmd_val(pmd) & ~PMD_MASKED_BITS)
+#define pmd_page(pmd) virt_to_page(pmd_page_vaddr(pmd))
+
+#define pud_set(pudp, pudval) (pud_val(*(pudp)) = (pudval))
+#define pud_none(pud) (!pud_val(pud))
+#define pud_bad(pud) (!is_kernel_addr(pud_val(pud)) \
+ || (pud_val(pud) & PUD_BAD_BITS))
+#define pud_present(pud) (pud_val(pud) != 0)
+#define pud_clear(pudp) (pud_val(*(pudp)) = 0)
+#define pud_page_vaddr(pud) (pud_val(pud) & ~PUD_MASKED_BITS)
+#define pud_page(pud) virt_to_page(pud_page_vaddr(pud))
+
+#define pgd_set(pgdp, pudp) ({pgd_val(*(pgdp)) = (unsigned long)(pudp);})
+
+/*
+ * Find an entry in a page-table-directory. We combine the address region
+ * (the high order N bits) and the pgd portion of the address.
+ */
+/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */
+#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x1ff)
+
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+#define pmd_offset(pudp,addr) \
+ (((pmd_t *) pud_page_vaddr(*(pudp))) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
+
+#define pte_offset_kernel(dir,addr) \
+ (((pte_t *) pmd_page_vaddr(*(dir))) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+
+#define pte_offset_map(dir,addr) pte_offset_kernel((dir), (addr))
+#define pte_offset_map_nested(dir,addr) pte_offset_kernel((dir), (addr))
+#define pte_unmap(pte) do { } while(0)
+#define pte_unmap_nested(pte) do { } while(0)
+
+/* to find an entry in a kernel page-table-directory */
+/* This now only contains the vmalloc pages */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER;}
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;}
+static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC;}
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;}
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_rdprotect(pte_t pte) {
+ pte_val(pte) &= ~_PAGE_USER; return pte; }
+static inline pte_t pte_exprotect(pte_t pte) {
+ pte_val(pte) &= ~_PAGE_EXEC; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) {
+ pte_val(pte) &= ~(_PAGE_RW); return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+ pte_val(pte) &= ~(_PAGE_DIRTY); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkread(pte_t pte) {
+ pte_val(pte) |= _PAGE_USER; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) {
+ pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) {
+ pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkhuge(pte_t pte) {
+ return pte; }
+
+/* Atomic PTE updates */
+static inline unsigned long pte_update(struct mm_struct *mm,
+ unsigned long addr,
+ pte_t *ptep, unsigned long clr,
+ int huge)
+{
+ unsigned long old, tmp;
+
+ __asm__ __volatile__(
+ "1: ldarx %0,0,%3 # pte_update\n\
+ andi. %1,%0,%6\n\
+ bne- 1b \n\
+ andc %1,%0,%4 \n\
+ stdcx. %1,0,%3 \n\
+ bne- 1b"
+ : "=&r" (old), "=&r" (tmp), "=m" (*ptep)
+ : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY)
+ : "cc" );
+
+ if (old & _PAGE_HASHPTE)
+ hpte_need_flush(mm, addr, ptep, old, huge);
+ return old;
+}
+
+static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ unsigned long old;
+
+ if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
+ return 0;
+ old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0);
+ return (old & _PAGE_ACCESSED) != 0;
+}
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
+({ \
+ int __r; \
+ __r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \
+ __r; \
+})
+
+/*
+ * On RW/DIRTY bit transitions we can avoid flushing the hpte. For the
+ * moment we always flush but we need to fix hpte_update and test if the
+ * optimisation is worth it.
+ */
+static inline int __ptep_test_and_clear_dirty(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ unsigned long old;
+
+ if ((pte_val(*ptep) & _PAGE_DIRTY) == 0)
+ return 0;
+ old = pte_update(mm, addr, ptep, _PAGE_DIRTY, 0);
+ return (old & _PAGE_DIRTY) != 0;
+}
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define ptep_test_and_clear_dirty(__vma, __addr, __ptep) \
+({ \
+ int __r; \
+ __r = __ptep_test_and_clear_dirty((__vma)->vm_mm, __addr, __ptep); \
+ __r; \
+})
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ unsigned long old;
+
+ if ((pte_val(*ptep) & _PAGE_RW) == 0)
+ return;
+ old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
+}
+
+/*
+ * We currently remove entries from the hashtable regardless of whether
+ * the entry was young or dirty. The generic routines only flush if the
+ * entry was young or dirty which is not good enough.
+ *
+ * We should be more intelligent about this but for the moment we override
+ * these functions and force a tlb flush unconditionally
+ */
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+#define ptep_clear_flush_young(__vma, __address, __ptep) \
+({ \
+ int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \
+ __ptep); \
+ __young; \
+})
+
+#define __HAVE_ARCH_PTEP_CLEAR_DIRTY_FLUSH
+#define ptep_clear_flush_dirty(__vma, __address, __ptep) \
+({ \
+ int __dirty = __ptep_test_and_clear_dirty((__vma)->vm_mm, __address, \
+ __ptep); \
+ __dirty; \
+})
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0);
+ return __pte(old);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t * ptep)
+{
+ pte_update(mm, addr, ptep, ~0UL, 0);
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+ if (pte_present(*ptep))
+ pte_clear(mm, addr, ptep);
+ pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
+ *ptep = pte;
+}
+
+/* Set the dirty and/or accessed bits atomically in a linux PTE, this
+ * function doesn't need to flush the hash entry
+ */
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+{
+ unsigned long bits = pte_val(entry) &
+ (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
+ unsigned long old, tmp;
+
+ __asm__ __volatile__(
+ "1: ldarx %0,0,%4\n\
+ andi. %1,%0,%6\n\
+ bne- 1b \n\
+ or %0,%3,%0\n\
+ stdcx. %0,0,%4\n\
+ bne- 1b"
+ :"=&r" (old), "=&r" (tmp), "=m" (*ptep)
+ :"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY)
+ :"cc");
+}
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+ do { \
+ __ptep_set_access_flags(__ptep, __entry, __dirty); \
+ flush_tlb_page_nohash(__vma, __address); \
+ } while(0)
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
+
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+ printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+extern pgd_t swapper_pg_dir[];
+
+extern void paging_init(void);
+
+/* Encode and de-code a swap entry */
+#define __swp_type(entry) (((entry).val >> 1) & 0x3f)
+#define __swp_offset(entry) ((entry).val >> 8)
+#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)})
+#define __pte_to_swp_entry(pte) ((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT})
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val << PTE_RPN_SHIFT })
+#define pte_to_pgoff(pte) (pte_val(pte) >> PTE_RPN_SHIFT)
+#define pgoff_to_pte(off) ((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE})
+#define PTE_FILE_MAX_BITS (BITS_PER_LONG - PTE_RPN_SHIFT)
+
+/*
+ * kern_addr_valid is intended to indicate whether an address is a valid
+ * kernel address. Most 32-bit archs define it as always true (like this)
+ * but most 64-bit archs actually perform a test. What should we do here?
+ * The only use is in fs/ncpfs/dir.c
+ */
+#define kern_addr_valid(addr) (1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+void pgtable_cache_init(void);
+
+/*
+ * find_linux_pte returns the address of a linux pte for a given
+ * effective address and directory. If not found, it returns zero.
+ */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea)
+{
+ pgd_t *pg;
+ pud_t *pu;
+ pmd_t *pm;
+ pte_t *pt = NULL;
+
+ pg = pgdir + pgd_index(ea);
+ if (!pgd_none(*pg)) {
+ pu = pud_offset(pg, ea);
+ if (!pud_none(*pu)) {
+ pm = pmd_offset(pu, ea);
+ if (pmd_present(*pm))
+ pt = pte_offset_kernel(pm, ea);
+ }
+ }
+ return pt;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
#define _ASM_POWERPC_PGTABLE_H
#ifdef __KERNEL__
-#ifndef CONFIG_PPC64
-#include <asm-ppc/pgtable.h>
+#if defined(CONFIG_PPC64)
+# include <asm/pgtable-ppc64.h>
#else
-
-/*
- * This file contains the functions and defines necessary to modify and use
- * the ppc64 hashed page table.
- */
-
-#ifndef __ASSEMBLY__
-#include <linux/stddef.h>
-#include <asm/processor.h> /* For TASK_SIZE */
-#include <asm/mmu.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-struct mm_struct;
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_PPC_64K_PAGES
-#include <asm/pgtable-64k.h>
-#else
-#include <asm/pgtable-4k.h>
-#endif
-
-#define FIRST_USER_ADDRESS 0
-
-/*
- * Size of EA range mapped by our pagetables.
- */
-#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
- PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
-#define PGTABLE_RANGE (1UL << PGTABLE_EADDR_SIZE)
-
-#if TASK_SIZE_USER64 > PGTABLE_RANGE
-#error TASK_SIZE_USER64 exceeds pagetable range
-#endif
-
-#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
-#error TASK_SIZE_USER64 exceeds user VSID range
+# include <asm/pgtable-ppc32.h>
#endif
-/*
- * Define the address range of the vmalloc VM area.
- */
-#define VMALLOC_START ASM_CONST(0xD000000000000000)
-#define VMALLOC_SIZE ASM_CONST(0x80000000000)
-#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE)
-
-/*
- * Define the address range of the imalloc VM area.
- */
-#define PHBS_IO_BASE VMALLOC_END
-#define IMALLOC_BASE (PHBS_IO_BASE + 0x80000000ul) /* Reserve 2 gigs for PHBs */
-#define IMALLOC_END (VMALLOC_START + PGTABLE_RANGE)
-
-/*
- * Region IDs
- */
-#define REGION_SHIFT 60UL
-#define REGION_MASK (0xfUL << REGION_SHIFT)
-#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT)
-
-#define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START))
-#define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET))
-#define USER_REGION_ID (0UL)
-
-/*
- * Common bits in a linux-style PTE. These match the bits in the
- * (hardware-defined) PowerPC PTE as closely as possible. Additional
- * bits may be defined in pgtable-*.h
- */
-#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */
-#define _PAGE_USER 0x0002 /* matches one of the PP bits */
-#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */
-#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */
-#define _PAGE_GUARDED 0x0008
-#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */
-#define _PAGE_DIRTY 0x0080 /* C: page changed */
-#define _PAGE_ACCESSED 0x0100 /* R: page referenced */
-#define _PAGE_RW 0x0200 /* software: user write access allowed */
-#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */
-#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */
-
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
-
-#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY)
-
-/* __pgprot defined in asm-powerpc/page.h */
-#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
-
-#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
-#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_WRENABLE)
-#define PAGE_KERNEL_CI __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
- _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED)
-#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC)
-
-#define PAGE_AGP __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
-#define HAVE_PAGE_AGP
-
-/* PTEIDX nibble */
-#define _PTEIDX_SECONDARY 0x8
-#define _PTEIDX_GROUP_IX 0x7
-
-
-/*
- * POWER4 and newer have per page execute protection, older chips can only
- * do this on a segment (256MB) basis.
- *
- * Also, write permissions imply read permissions.
- * This is the closest we can get..
- *
- * Note due to the way vm flags are laid out, the bits are XWR
- */
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY
-#define __P100 PAGE_READONLY_X
-#define __P101 PAGE_READONLY_X
-#define __P110 PAGE_COPY_X
-#define __P111 PAGE_COPY_X
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED
-#define __S100 PAGE_READONLY_X
-#define __S101 PAGE_READONLY_X
-#define __S110 PAGE_SHARED_X
-#define __S111 PAGE_SHARED_X
-
#ifndef __ASSEMBLY__
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_HUGETLB_PAGE
-
-#define HAVE_ARCH_UNMAPPED_AREA
-#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * mk_pte takes a (struct page *) as input
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
-static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
-{
- pte_t pte;
-
-
- pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot);
- return pte;
-}
-
-#define pte_modify(_pte, newprot) \
- (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)))
-
-#define pte_none(pte) ((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0)
-#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
-
-/* pte_clear moved to later in this file */
-
-#define pte_pfn(x) ((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT)))
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
-#define PMD_BAD_BITS (PTE_TABLE_SIZE-1)
-#define PUD_BAD_BITS (PMD_TABLE_SIZE-1)
-
-#define pmd_set(pmdp, pmdval) (pmd_val(*(pmdp)) = (pmdval))
-#define pmd_none(pmd) (!pmd_val(pmd))
-#define pmd_bad(pmd) (!is_kernel_addr(pmd_val(pmd)) \
- || (pmd_val(pmd) & PMD_BAD_BITS))
-#define pmd_present(pmd) (pmd_val(pmd) != 0)
-#define pmd_clear(pmdp) (pmd_val(*(pmdp)) = 0)
-#define pmd_page_vaddr(pmd) (pmd_val(pmd) & ~PMD_MASKED_BITS)
-#define pmd_page(pmd) virt_to_page(pmd_page_vaddr(pmd))
-
-#define pud_set(pudp, pudval) (pud_val(*(pudp)) = (pudval))
-#define pud_none(pud) (!pud_val(pud))
-#define pud_bad(pud) (!is_kernel_addr(pud_val(pud)) \
- || (pud_val(pud) & PUD_BAD_BITS))
-#define pud_present(pud) (pud_val(pud) != 0)
-#define pud_clear(pudp) (pud_val(*(pudp)) = 0)
-#define pud_page_vaddr(pud) (pud_val(pud) & ~PUD_MASKED_BITS)
-#define pud_page(pud) virt_to_page(pud_page_vaddr(pud))
-
-#define pgd_set(pgdp, pudp) ({pgd_val(*(pgdp)) = (unsigned long)(pudp);})
-
-/*
- * Find an entry in a page-table-directory. We combine the address region
- * (the high order N bits) and the pgd portion of the address.
- */
-/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */
-#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x1ff)
-
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-
-#define pmd_offset(pudp,addr) \
- (((pmd_t *) pud_page_vaddr(*(pudp))) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
-
-#define pte_offset_kernel(dir,addr) \
- (((pte_t *) pmd_page_vaddr(*(dir))) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
-
-#define pte_offset_map(dir,addr) pte_offset_kernel((dir), (addr))
-#define pte_offset_map_nested(dir,addr) pte_offset_kernel((dir), (addr))
-#define pte_unmap(pte) do { } while(0)
-#define pte_unmap_nested(pte) do { } while(0)
-
-/* to find an entry in a kernel page-table-directory */
-/* This now only contains the vmalloc pages */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER;}
-static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;}
-static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC;}
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;}
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
-
-static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
-static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
-
-static inline pte_t pte_rdprotect(pte_t pte) {
- pte_val(pte) &= ~_PAGE_USER; return pte; }
-static inline pte_t pte_exprotect(pte_t pte) {
- pte_val(pte) &= ~_PAGE_EXEC; return pte; }
-static inline pte_t pte_wrprotect(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_RW); return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_DIRTY); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
- pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkread(pte_t pte) {
- pte_val(pte) |= _PAGE_USER; return pte; }
-static inline pte_t pte_mkexec(pte_t pte) {
- pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte) {
- pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
- pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
- pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkhuge(pte_t pte) {
- return pte; }
-
-/* Atomic PTE updates */
-static inline unsigned long pte_update(struct mm_struct *mm,
- unsigned long addr,
- pte_t *ptep, unsigned long clr,
- int huge)
-{
- unsigned long old, tmp;
-
- __asm__ __volatile__(
- "1: ldarx %0,0,%3 # pte_update\n\
- andi. %1,%0,%6\n\
- bne- 1b \n\
- andc %1,%0,%4 \n\
- stdcx. %1,0,%3 \n\
- bne- 1b"
- : "=&r" (old), "=&r" (tmp), "=m" (*ptep)
- : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY)
- : "cc" );
-
- if (old & _PAGE_HASHPTE)
- hpte_need_flush(mm, addr, ptep, old, huge);
- return old;
-}
-
-static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
- unsigned long addr, pte_t *ptep)
-{
- unsigned long old;
-
- if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
- return 0;
- old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0);
- return (old & _PAGE_ACCESSED) != 0;
-}
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
-({ \
- int __r; \
- __r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \
- __r; \
-})
-
-/*
- * On RW/DIRTY bit transitions we can avoid flushing the hpte. For the
- * moment we always flush but we need to fix hpte_update and test if the
- * optimisation is worth it.
- */
-static inline int __ptep_test_and_clear_dirty(struct mm_struct *mm,
- unsigned long addr, pte_t *ptep)
-{
- unsigned long old;
-
- if ((pte_val(*ptep) & _PAGE_DIRTY) == 0)
- return 0;
- old = pte_update(mm, addr, ptep, _PAGE_DIRTY, 0);
- return (old & _PAGE_DIRTY) != 0;
-}
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
-#define ptep_test_and_clear_dirty(__vma, __addr, __ptep) \
-({ \
- int __r; \
- __r = __ptep_test_and_clear_dirty((__vma)->vm_mm, __addr, __ptep); \
- __r; \
-})
-
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep)
-{
- unsigned long old;
-
- if ((pte_val(*ptep) & _PAGE_RW) == 0)
- return;
- old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
-}
-
-/*
- * We currently remove entries from the hashtable regardless of whether
- * the entry was young or dirty. The generic routines only flush if the
- * entry was young or dirty which is not good enough.
- *
- * We should be more intelligent about this but for the moment we override
- * these functions and force a tlb flush unconditionally
- */
-#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
-#define ptep_clear_flush_young(__vma, __address, __ptep) \
-({ \
- int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \
- __ptep); \
- __young; \
-})
-
-#define __HAVE_ARCH_PTEP_CLEAR_DIRTY_FLUSH
-#define ptep_clear_flush_dirty(__vma, __address, __ptep) \
-({ \
- int __dirty = __ptep_test_and_clear_dirty((__vma)->vm_mm, __address, \
- __ptep); \
- __dirty; \
-})
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
- unsigned long addr, pte_t *ptep)
-{
- unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0);
- return __pte(old);
-}
-
-static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
- pte_t * ptep)
-{
- pte_update(mm, addr, ptep, ~0UL, 0);
-}
-
-/*
- * set_pte stores a linux PTE into the linux page table.
- */
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte)
-{
- if (pte_present(*ptep))
- pte_clear(mm, addr, ptep);
- pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
- *ptep = pte;
-}
-
-/* Set the dirty and/or accessed bits atomically in a linux PTE, this
- * function doesn't need to flush the hash entry
- */
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
-{
- unsigned long bits = pte_val(entry) &
- (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
- unsigned long old, tmp;
-
- __asm__ __volatile__(
- "1: ldarx %0,0,%4\n\
- andi. %1,%0,%6\n\
- bne- 1b \n\
- or %0,%3,%0\n\
- stdcx. %0,0,%4\n\
- bne- 1b"
- :"=&r" (old), "=&r" (tmp), "=m" (*ptep)
- :"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY)
- :"cc");
-}
-#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
- do { \
- __ptep_set_access_flags(__ptep, __entry, __dirty); \
- flush_tlb_page_nohash(__vma, __address); \
- } while(0)
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
- unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
-#define __HAVE_ARCH_PTE_SAME
-#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
-
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-extern pgd_t swapper_pg_dir[];
-
-extern void paging_init(void);
-
-/* Encode and de-code a swap entry */
-#define __swp_type(entry) (((entry).val >> 1) & 0x3f)
-#define __swp_offset(entry) ((entry).val >> 8)
-#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)})
-#define __pte_to_swp_entry(pte) ((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT})
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val << PTE_RPN_SHIFT })
-#define pte_to_pgoff(pte) (pte_val(pte) >> PTE_RPN_SHIFT)
-#define pgoff_to_pte(off) ((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE})
-#define PTE_FILE_MAX_BITS (BITS_PER_LONG - PTE_RPN_SHIFT)
-
-/*
- * kern_addr_valid is intended to indicate whether an address is a valid
- * kernel address. Most 32-bit archs define it as always true (like this)
- * but most 64-bit archs actually perform a test. What should we do here?
- * The only use is in fs/ncpfs/dir.c
- */
-#define kern_addr_valid(addr) (1)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-void pgtable_cache_init(void);
-
-/*
- * find_linux_pte returns the address of a linux pte for a given
- * effective address and directory. If not found, it returns zero.
- */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea)
-{
- pgd_t *pg;
- pud_t *pu;
- pmd_t *pm;
- pte_t *pt = NULL;
-
- pg = pgdir + pgd_index(ea);
- if (!pgd_none(*pg)) {
- pu = pud_offset(pg, ea);
- if (!pud_none(*pu)) {
- pm = pmd_offset(pu, ea);
- if (pmd_present(*pm))
- pt = pte_offset_kernel(pm, ea);
- }
- }
- return pt;
-}
-
-
#include <asm-generic/pgtable.h>
-
#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_PPC64 */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PGTABLE_H */
static inline long pmac_call_feature(int selector, struct device_node* node,
long param, long value)
{
- if (!ppc_md.feature_call)
+ if (!ppc_md.feature_call || !machine_is(powermac))
return -ENODEV;
return ppc_md.feature_call(selector, node, param, value);
}
#include <linux/platform_device.h>
#include <asm/irq.h>
#include <asm/atomic.h>
-#include <asm/io.h>
/* Definitions used by the flattened device tree */
#define OF_DT_HEADER 0xd00dfeed /* marker */
struct pci_dev;
extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-static inline int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
-{
- int irq = irq_of_parse_and_map(dev, index);
-
- /* Only dereference the resource if both the
- * resource and the irq are valid. */
- if (r && irq != NO_IRQ) {
- r->start = r->end = irq;
- r->flags = IORESOURCE_IRQ;
- }
-
- return irq;
-}
-
-static inline void __iomem *of_iomap(struct device_node *np, int index)
-{
- struct resource res;
-
- if (of_address_to_resource(np, index, &res))
- return NULL;
-
- return ioremap(res.start, 1 + res.end - res.start);
-}
+extern int of_irq_to_resource(struct device_node *dev, int index,
+ struct resource *r);
+/**
+ * of_iomap - Maps the memory mapped IO for a given device_node
+ * @device: the device whose io range will be mapped
+ * @index: index of the io range
+ *
+ * Returns a pointer to the mapped memory
+ */
+extern void __iomem *of_iomap(struct device_node *device, int index);
#endif /* __KERNEL__ */
#endif /* _POWERPC_PROM_H */
PS3_BINDING_CPU_1 = 1,
};
-int ps3_alloc_io_irq(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
+int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
unsigned int *virq);
-int ps3_free_io_irq(unsigned int virq);
-int ps3_alloc_event_irq(enum ps3_cpu_binding cpu, unsigned int *virq);
-int ps3_free_event_irq(unsigned int virq);
+int ps3_virq_destroy(unsigned int virq);
+int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
+ unsigned int *virq);
+int ps3_irq_plug_destroy(unsigned int virq);
+int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq);
+int ps3_event_receive_port_destroy(unsigned int virq);
int ps3_send_event_locally(unsigned int virq);
-int ps3_connect_event_irq(enum ps3_cpu_binding cpu,
- const struct ps3_device_id *did, unsigned int interrupt_id,
+
+int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
unsigned int *virq);
-int ps3_disconnect_event_irq(const struct ps3_device_id *did,
- unsigned int interrupt_id, unsigned int virq);
-int ps3_alloc_vuart_irq(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
+int ps3_io_irq_destroy(unsigned int virq);
+int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
unsigned int *virq);
-int ps3_free_vuart_irq(unsigned int virq);
-int ps3_alloc_spe_irq(enum ps3_cpu_binding cpu, unsigned long spe_id,
+int ps3_vuart_irq_destroy(unsigned int virq);
+int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
unsigned int class, unsigned int *virq);
-int ps3_free_spe_irq(unsigned int virq);
-int ps3_alloc_irq(enum ps3_cpu_binding cpu, unsigned long outlet,
+int ps3_spe_irq_destroy(unsigned int virq);
+
+int ps3_sb_event_receive_port_setup(enum ps3_cpu_binding cpu,
+ const struct ps3_device_id *did, unsigned int interrupt_id,
unsigned int *virq);
-int ps3_free_irq(unsigned int virq);
+int ps3_sb_event_receive_port_destroy(const struct ps3_device_id *did,
+ unsigned int interrupt_id, unsigned int virq);
/* lv1 result codes */
--- /dev/null
+#ifndef __ASM_POWERPC_SUSPEND_H
+#define __ASM_POWERPC_SUSPEND_H
+
+static inline int arch_prepare_suspend(void) { return 0; }
+
+void save_processor_state(void);
+void restore_processor_state(void);
+
+#endif /* __ASM_POWERPC_SUSPEND_H */
#define TSI108_PB_ERRCS_ES (1 << 1)
#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8)
-#define TSI108_PCI_CFG_BASE_PHYS (0xfb000000)
#define TSI108_PCI_CFG_SIZE (0x01000000)
+
+/*
+ * PHY Configuration Options
+ *
+ * Specify "bcm54xx" in the compatible property of your device tree phy
+ * nodes if your board uses the Broadcom PHYs
+ */
+#define TSI108_PHY_MV88E 0 /* Marvel 88Exxxx PHY */
+#define TSI108_PHY_BCM54XX 1 /* Broardcom BCM54xx PHY */
+
/* Global variables */
extern u32 tsi108_pci_cfg_base;
u16 phy; /* phy address */
u16 irq_num; /* irq number */
u8 mac_addr[6]; /* phy mac address */
+ u16 phy_type; /* type of phy on board */
} hw_info;
extern u32 get_vir_csrbase(void);
--- /dev/null
+/*
+ * Copyright 2007 IBM Corp
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_PPC_TSI108_PCI_H
+#define _ASM_PPC_TSI108_PCI_H
+
+#include <asm/tsi108.h>
+
+/* Register definitions */
+#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10)
+#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14)
+#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18)
+#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c)
+#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c)
+#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204)
+#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208)
+#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c)
+#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210)
+#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214)
+#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220)
+#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230)
+
+extern int tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary);
+extern void tsi108_pci_int_init(struct device_node *node);
+extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
+extern void tsi108_clear_pci_cfg_error(void);
+
+#endif /* _ASM_PPC_TSI108_PCI_H */
/* Backlight */
extern void pmu_backlight_init(void);
+/* some code needs to know if the PMU was suspended for hibernation */
+#ifdef CONFIG_PM
+extern int pmu_sys_suspended;
+#else
+/* if power management is not configured it can't be suspended */
+#define pmu_sys_suspended 0
+#endif
+
#endif /* __KERNEL__ */
#ifndef _LINUX_SWSUSP_H
#define _LINUX_SWSUSP_H
-#if defined(CONFIG_X86) || defined(CONFIG_FRV) || defined(CONFIG_PPC32)
+#if defined(CONFIG_X86) || defined(CONFIG_FRV) || defined(CONFIG_PPC32) || defined(CONFIG_PPC64)
#include <asm/suspend.h>
#endif
#include <linux/swap.h>
config SOFTWARE_SUSPEND
bool "Software Suspend (Hibernation)"
- depends on PM && SWAP && ((X86 && (!SMP || SUSPEND_SMP)) || ((FRV || PPC32) && !SMP))
+ depends on PM && SWAP && (((X86 || PPC64_SWSUSP) && (!SMP || SUSPEND_SMP)) || ((FRV || PPC32) && !SMP))
---help---
Enable the suspend to disk (STD) functionality, which is usually
called "hibernation" in user interfaces. STD checkpoints the
config SUSPEND_SMP
bool
- depends on HOTPLUG_CPU && X86 && PM
+ depends on HOTPLUG_CPU && (X86 || PPC64) && PM
default y
config APM_EMULATION
busnode = pmac_i2c_get_bus_node(bus);
while ((dev = of_get_next_child(busnode, dev)) != NULL) {
- if (device_is_compatible(dev, "pcm3052")) {
+ if (of_device_is_compatible(dev, "pcm3052")) {
const u32 *addr;
printk(KERN_DEBUG PFX "found pcm3052\n");
addr = of_get_property(dev, "reg", NULL);
/* if that didn't work, try desperate mode for older
* machines that have stuff missing from the device tree */
- if (!device_is_compatible(busnode, "k2-i2c"))
+ if (!of_device_is_compatible(busnode, "k2-i2c"))
return -ENODEV;
printk(KERN_DEBUG PFX "found k2-i2c, checking if onyx chip is on it\n");
busnode = pmac_i2c_get_bus_node(bus);
while ((dev = of_get_next_child(busnode, dev)) != NULL) {
- if (device_is_compatible(dev, "tas3004")) {
+ if (of_device_is_compatible(dev, "tas3004")) {
const u32 *addr;
printk(KERN_DEBUG PFX "found tas3004\n");
addr = of_get_property(dev, "reg", NULL);
}
while ((np = of_get_next_child(dev->ofdev.node, np))) {
- if (device_is_compatible(np, "i2sbus") ||
- device_is_compatible(np, "i2s-modem")) {
+ if (of_device_is_compatible(np, "i2sbus") ||
+ of_device_is_compatible(np, "i2s-modem")) {
got += i2sbus_add_dev(dev, control, np);
}
}
of_get_property(np,"audio-gpio",NULL);
if (property != 0 && strcmp(property,name) == 0)
break;
- } else if (compatible && device_is_compatible(np, compatible))
+ } else if (compatible && of_device_is_compatible(np, compatible))
break;
np = of_get_next_child(gpiop, np);
}
if (info) {
/* must do awacs first to allow screamer to overide it */
- if (device_is_compatible(info, "awacs"))
+ if (of_device_is_compatible(info, "awacs"))
codec = AWACS_AWACS ;
- if (device_is_compatible(info, "screamer"))
+ if (of_device_is_compatible(info, "screamer"))
codec = AWACS_SCREAMER;
- if (device_is_compatible(info, "burgundy"))
+ if (of_device_is_compatible(info, "burgundy"))
codec = AWACS_BURGUNDY ;
- if (device_is_compatible(info, "daca"))
+ if (of_device_is_compatible(info, "daca"))
codec = AWACS_DACA;
- if (device_is_compatible(info, "tumbler"))
+ if (of_device_is_compatible(info, "tumbler"))
codec = AWACS_TUMBLER;
- if (device_is_compatible(info, "snapper"))
+ if (of_device_is_compatible(info, "snapper"))
codec = AWACS_SNAPPER;
}
return codec ;
for (mio = io->parent; mio ; mio = mio->parent) {
if (strcmp(mio->name, "mac-io") == 0) {
- if (device_is_compatible(mio, "Keylargo"))
+ if (of_device_is_compatible(mio, "Keylargo"))
kl = 1;
break;
}
/* if seems that Keylargo can't byte-swap */
for (mio = chip->node->parent; mio; mio = mio->parent) {
if (strcmp(mio->name, "mac-io") == 0) {
- if (device_is_compatible(mio, "Keylargo"))
+ if (of_device_is_compatible(mio, "Keylargo"))
chip->can_byte_swap = 0;
break;
}
chip->node = of_find_node_by_name(NULL, "i2s-a");
if (chip->node && chip->node->parent &&
chip->node->parent->parent) {
- if (device_is_compatible(chip->node->parent->parent,
+ if (of_device_is_compatible(chip->node->parent->parent,
"K2-Keylargo"))
chip->is_k2 = 1;
}
return -ENODEV;
}
/* This should be verified on older screamers */
- if (device_is_compatible(sound, "screamer")) {
+ if (of_device_is_compatible(sound, "screamer")) {
chip->model = PMAC_SCREAMER;
// chip->can_byte_swap = 0; /* FIXME: check this */
}
- if (device_is_compatible(sound, "burgundy")) {
+ if (of_device_is_compatible(sound, "burgundy")) {
chip->model = PMAC_BURGUNDY;
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
}
- if (device_is_compatible(sound, "daca")) {
+ if (of_device_is_compatible(sound, "daca")) {
chip->model = PMAC_DACA;
chip->can_capture = 0; /* no capture */
chip->can_duplex = 0;
// chip->can_byte_swap = 0; /* FIXME: check this */
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
}
- if (device_is_compatible(sound, "tumbler")) {
+ if (of_device_is_compatible(sound, "tumbler")) {
chip->model = PMAC_TUMBLER;
chip->can_capture = 0; /* no capture */
chip->can_duplex = 0;
chip->freq_table = tumbler_freqs;
chip->control_mask = MASK_IEPC | 0x11; /* disable IEE */
}
- if (device_is_compatible(sound, "snapper")) {
+ if (of_device_is_compatible(sound, "snapper")) {
chip->model = PMAC_SNAPPER;
// chip->can_byte_swap = 0; /* FIXME: check this */
chip->num_freqs = ARRAY_SIZE(tumbler_freqs);
for (np = of_get_next_child(gpiop, NULL); np;
np = of_get_next_child(gpiop, np)) {
- if (device_is_compatible(np, name))
+ if (of_device_is_compatible(np, name))
break;
}
of_node_put(gpiop);
projects / linux-drm-fsl-dcu.git / commitdiff