X-Git-Url: http://git.agner.ch/gitweb/?p=linux-drm-fsl-dcu.git;a=blobdiff_plain;f=drivers%2Fusb%2Fserial%2Fkeyspan_pda.c;h=dd0b66a6ed5d00825a93c571d867f31abd61a183;hp=49b8dc039d1fef8f68aca71fee6efdb02082f458;hb=574009c1a895aeeb85eaab29c235d75852b09eb8;hpb=da547d775fa9ba8d9dcaee7bc4e960540e2be576

diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 49b8dc039d1f..dd0b66a6ed5d 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -120,6 +120,8 @@ struct keyspan_pda_private {
 	int			tx_throttled;
 	struct work_struct			wakeup_work;
 	struct work_struct			unthrottle_work;
+	struct usb_serial	*serial;
+	struct usb_serial_port	*port;
 };
 
 
@@ -175,20 +177,20 @@ static struct usb_device_id id_table_fake_xircom [] = {
 };
 #endif
 
-static void keyspan_pda_wakeup_write( struct usb_serial_port *port )
+static void keyspan_pda_wakeup_write(struct work_struct *work)
 {
+	struct keyspan_pda_private *priv =
+		container_of(work, struct keyspan_pda_private, wakeup_work);
+	struct usb_serial_port *port = priv->port;
 
-	struct tty_struct *tty = port->tty;
-
-	/* wake up port processes */
-	wake_up_interruptible( &port->write_wait );
-
-	/* wake up line discipline */
-	tty_wakeup(tty);
+	tty_wakeup(port->tty);
 }
 
-static void keyspan_pda_request_unthrottle( struct usb_serial *serial )
+static void keyspan_pda_request_unthrottle(struct work_struct *work)
 {
+	struct keyspan_pda_private *priv =
+		container_of(work, struct keyspan_pda_private, unthrottle_work);
+	struct usb_serial *serial = priv->serial;
 	int result;
 
 	dbg(" request_unthrottle");
@@ -210,7 +212,7 @@ static void keyspan_pda_request_unthrottle( struct usb_serial *serial )
 }
 
 
-static void keyspan_pda_rx_interrupt (struct urb *urb, struct pt_regs *regs)
+static void keyspan_pda_rx_interrupt (struct urb *urb)
 {
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
        	struct tty_struct *tty = port->tty;
@@ -358,7 +360,7 @@ static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state
 
 
 static void keyspan_pda_set_termios (struct usb_serial_port *port, 
-				     struct termios *old_termios)
+				     struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	unsigned int cflag = port->tty->termios->c_cflag;
@@ -518,13 +520,13 @@ static int keyspan_pda_write(struct usb_serial_port *port,
 	   the TX urb is in-flight (wait until it completes)
 	   the device is full (wait until it says there is room)
 	*/
-	spin_lock(&port->lock);
+	spin_lock_bh(&port->lock);
 	if (port->write_urb_busy || priv->tx_throttled) {
-		spin_unlock(&port->lock);
+		spin_unlock_bh(&port->lock);
 		return 0;
 	}
 	port->write_urb_busy = 1;
-	spin_unlock(&port->lock);
+	spin_unlock_bh(&port->lock);
 
 	/* At this point the URB is in our control, nobody else can submit it
 	   again (the only sudden transition was the one from EINPROGRESS to
@@ -601,7 +603,7 @@ exit:
 }
 
 
-static void keyspan_pda_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
+static void keyspan_pda_write_bulk_callback (struct urb *urb)
 {
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
 	struct keyspan_pda_private *priv;
@@ -765,11 +767,10 @@ static int keyspan_pda_startup (struct usb_serial *serial)
 		return (1); /* error */
 	usb_set_serial_port_data(serial->port[0], priv);
 	init_waitqueue_head(&serial->port[0]->write_wait);
-	INIT_WORK(&priv->wakeup_work, (void *)keyspan_pda_wakeup_write,
-			(void *)(serial->port[0]));
-	INIT_WORK(&priv->unthrottle_work,
-			(void *)keyspan_pda_request_unthrottle,
-			(void *)(serial));
+	INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
+	INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
+	priv->serial = serial;
+	priv->port = serial->port[0];
 	return (0);
 }
 
@@ -787,6 +788,7 @@ static struct usb_serial_driver keyspan_pda_fake_device = {
 		.name =		"keyspan_pda_pre",
 	},
 	.description =		"Keyspan PDA - (prerenumeration)",
+	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_fake,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -803,6 +805,7 @@ static struct usb_serial_driver xircom_pgs_fake_device = {
 		.name =		"xircom_no_firm",
 	},
 	.description =		"Xircom / Entregra PGS - (prerenumeration)",
+	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_fake_xircom,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -818,6 +821,7 @@ static struct usb_serial_driver keyspan_pda_device = {
 		.name =		"keyspan_pda",
 	},
 	.description =		"Keyspan PDA",
+	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_std,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		0,