/*********************************************************************
- *
+ *
* Filename: irlan_eth.c
- * Version:
- * Description:
+ * Version:
+ * Description:
* Status: Experimental.
* Author: Dag Brattli <dagb@cs.uit.no>
* Created at: Thu Oct 15 08:37:58 1998
* Sources: skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov>
* slip.c by Laurence Culhane, <loz@holmes.demon.co.uk>
* Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
- *
+ *
* Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
- *
+ *
* Neither Dag Brattli nor University of Tromsø admit liability nor
- * provide warranty for any of this software. This material is
+ * provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
- *
+ *
********************************************************************/
#include <linux/netdevice.h>
{
dev->open = irlan_eth_open;
dev->stop = irlan_eth_close;
- dev->hard_start_xmit = irlan_eth_xmit;
+ dev->hard_start_xmit = irlan_eth_xmit;
dev->get_stats = irlan_eth_get_stats;
dev->set_multicast_list = irlan_eth_set_multicast_list;
dev->destructor = free_netdev;
SET_MODULE_OWNER(dev);
ether_setup(dev);
-
- /*
+
+ /*
* Lets do all queueing in IrTTP instead of this device driver.
* Queueing here as well can introduce some strange latency
* problems, which we will avoid by setting the queue size to 0.
static int irlan_eth_open(struct net_device *dev)
{
struct irlan_cb *self = netdev_priv(dev);
-
+
IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
/* Ready to play! */
- netif_stop_queue(dev); /* Wait until data link is ready */
+ netif_stop_queue(dev); /* Wait until data link is ready */
/* We are now open, so time to do some work */
self->disconnect_reason = 0;
irlan_client_wakeup(self, self->saddr, self->daddr);
- /* Make sure we have a hardware address before we return,
+ /* Make sure we have a hardware address before we return,
so DHCP clients gets happy */
return wait_event_interruptible(self->open_wait,
!self->tsap_data->connected);
* Function irlan_eth_close (dev)
*
* Stop the ether network device, his function will usually be called by
- * ifconfig down. We should now disconnect the link, We start the
+ * ifconfig down. We should now disconnect the link, We start the
* close timer, so that the instance will be removed if we are unable
* to discover the remote device after the disconnect.
*/
static int irlan_eth_close(struct net_device *dev)
{
struct irlan_cb *self = netdev_priv(dev);
-
+
IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
+
/* Stop device */
netif_stop_queue(dev);
-
+
irlan_close_data_channel(self);
irlan_close_tsaps(self);
irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL);
- irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL);
-
+ irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL);
+
/* Remove frames queued on the control channel */
skb_queue_purge(&self->client.txq);
self->client.tx_busy = 0;
-
+
return 0;
}
/* skb headroom large enough to contain all IrDA-headers? */
if ((skb_headroom(skb) < self->max_header_size) || (skb_shared(skb))) {
- struct sk_buff *new_skb =
+ struct sk_buff *new_skb =
skb_realloc_headroom(skb, self->max_header_size);
/* We have to free the original skb anyway */
/* Use the new skb instead */
skb = new_skb;
- }
+ }
dev->trans_start = jiffies;
ret = irttp_data_request(self->tsap_data, skb);
if (ret < 0) {
- /*
+ /*
* IrTTPs tx queue is full, so we just have to
* drop the frame! You might think that we should
* just return -1 and don't deallocate the frame,
* we have replaced the original skb with a new
* one with larger headroom, and that would really
* confuse do_dev_queue_xmit() in dev.c! I have
- * tried :-) DB
+ * tried :-) DB
*/
/* irttp_data_request already free the packet */
self->stats.tx_dropped++;
} else {
self->stats.tx_packets++;
- self->stats.tx_bytes += skb->len;
+ self->stats.tx_bytes += skb->len;
}
-
+
return 0;
}
struct irlan_cb *self = instance;
if (skb == NULL) {
- ++self->stats.rx_dropped;
+ ++self->stats.rx_dropped;
return 0;
}
if (skb->len < ETH_HLEN) {
IRDA_DEBUG(0, "%s() : IrLAN frame too short (%d)\n",
__FUNCTION__, skb->len);
- ++self->stats.rx_dropped;
+ ++self->stats.rx_dropped;
dev_kfree_skb(skb);
return 0;
}
-
- /*
- * Adopt this frame! Important to set all these fields since they
+
+ /*
+ * Adopt this frame! Important to set all these fields since they
* might have been previously set by the low level IrDA network
- * device driver
+ * device driver
*/
skb->dev = self->dev;
skb->protocol=eth_type_trans(skb, skb->dev); /* Remove eth header */
-
+
self->stats.rx_packets++;
- self->stats.rx_bytes += skb->len;
+ self->stats.rx_bytes += skb->len;
netif_rx(skb); /* Eat it! */
-
+
return 0;
}
/*
* Function irlan_eth_flow (status)
*
- * Do flow control between IP/Ethernet and IrLAN/IrTTP. This is done by
+ * Do flow control between IP/Ethernet and IrLAN/IrTTP. This is done by
* controlling the queue stop/start.
*
* The IrDA link layer has the advantage to have flow control, and
IRDA_ASSERT(self != NULL, return;);
IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
-
+
dev = self->dev;
IRDA_ASSERT(dev != NULL, return;);
-
+
IRDA_DEBUG(0, "%s() : flow %s ; running %d\n", __FUNCTION__,
flow == FLOW_STOP ? "FLOW_STOP" : "FLOW_START",
netif_running(dev));
{
struct in_device *in_dev;
- /*
+ /*
* When we get a new MAC address do a gratuitous ARP. This
* is useful if we have changed access points on the same
- * subnet.
+ * subnet.
*/
#ifdef CONFIG_INET
IRDA_DEBUG(4, "IrLAN: Sending gratuitous ARP\n");
if (in_dev == NULL)
goto out;
if (in_dev->ifa_list)
-
- arp_send(ARPOP_REQUEST, ETH_P_ARP,
+
+ arp_send(ARPOP_REQUEST, ETH_P_ARP,
in_dev->ifa_list->ifa_address,
- dev,
+ dev,
in_dev->ifa_list->ifa_address,
NULL, dev->dev_addr, NULL);
out:
*
*/
#define HW_MAX_ADDRS 4 /* Must query to get it! */
-static void irlan_eth_set_multicast_list(struct net_device *dev)
+static void irlan_eth_set_multicast_list(struct net_device *dev)
{
- struct irlan_cb *self = netdev_priv(dev);
+ struct irlan_cb *self = netdev_priv(dev);
IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
if (dev->flags & IFF_PROMISC) {
/* Enable promiscuous mode */
IRDA_WARNING("Promiscous mode not implemented by IrLAN!\n");
- }
+ }
else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS) {
/* Disable promiscuous mode, use normal mode. */
IRDA_DEBUG(4, "%s(), Setting multicast filter\n", __FUNCTION__ );
* Get the current statistics for this device
*
*/
-static struct net_device_stats *irlan_eth_get_stats(struct net_device *dev)
+static struct net_device_stats *irlan_eth_get_stats(struct net_device *dev)
{
struct irlan_cb *self = netdev_priv(dev);
projects / linux-drm-fsl-dcu.git / blobdiff