EXPORT_SYMBOL(boot_tvec_bases);
static DEFINE_PER_CPU(tvec_base_t *, tvec_bases) = &boot_tvec_bases;
+/**
+ * __round_jiffies - function to round jiffies to a full second
+ * @j: the time in (absolute) jiffies that should be rounded
+ * @cpu: the processor number on which the timeout will happen
+ *
+ * __round_jiffies() rounds an absolute time in the future (in jiffies)
+ * up or down to (approximately) full seconds. This is useful for timers
+ * for which the exact time they fire does not matter too much, as long as
+ * they fire approximately every X seconds.
+ *
+ * By rounding these timers to whole seconds, all such timers will fire
+ * at the same time, rather than at various times spread out. The goal
+ * of this is to have the CPU wake up less, which saves power.
+ *
+ * The exact rounding is skewed for each processor to avoid all
+ * processors firing at the exact same time, which could lead
+ * to lock contention or spurious cache line bouncing.
+ *
+ * The return value is the rounded version of the @j parameter.
+ */
+unsigned long __round_jiffies(unsigned long j, int cpu)
+{
+ int rem;
+ unsigned long original = j;
+
+ /*
+ * We don't want all cpus firing their timers at once hitting the
+ * same lock or cachelines, so we skew each extra cpu with an extra
+ * 3 jiffies. This 3 jiffies came originally from the mm/ code which
+ * already did this.
+ * The skew is done by adding 3*cpunr, then round, then subtract this
+ * extra offset again.
+ */
+ j += cpu * 3;
+
+ rem = j % HZ;
+
+ /*
+ * If the target jiffie is just after a whole second (which can happen
+ * due to delays of the timer irq, long irq off times etc etc) then
+ * we should round down to the whole second, not up. Use 1/4th second
+ * as cutoff for this rounding as an extreme upper bound for this.
+ */
+ if (rem < HZ/4) /* round down */
+ j = j - rem;
+ else /* round up */
+ j = j - rem + HZ;
+
+ /* now that we have rounded, subtract the extra skew again */
+ j -= cpu * 3;
+
+ if (j <= jiffies) /* rounding ate our timeout entirely; */
+ return original;
+ return j;
+}
+EXPORT_SYMBOL_GPL(__round_jiffies);
+
+/**
+ * __round_jiffies_relative - function to round jiffies to a full second
+ * @j: the time in (relative) jiffies that should be rounded
+ * @cpu: the processor number on which the timeout will happen
+ *
+ * __round_jiffies_relative() rounds a time delta in the future (in jiffies)
+ * up or down to (approximately) full seconds. This is useful for timers
+ * for which the exact time they fire does not matter too much, as long as
+ * they fire approximately every X seconds.
+ *
+ * By rounding these timers to whole seconds, all such timers will fire
+ * at the same time, rather than at various times spread out. The goal
+ * of this is to have the CPU wake up less, which saves power.
+ *
+ * The exact rounding is skewed for each processor to avoid all
+ * processors firing at the exact same time, which could lead
+ * to lock contention or spurious cache line bouncing.
+ *
+ * The return value is the rounded version of the @j parameter.
+ */
+unsigned long __round_jiffies_relative(unsigned long j, int cpu)
+{
+ /*
+ * In theory the following code can skip a jiffy in case jiffies
+ * increments right between the addition and the later subtraction.
+ * However since the entire point of this function is to use approximate
+ * timeouts, it's entirely ok to not handle that.
+ */
+ return __round_jiffies(j + jiffies, cpu) - jiffies;
+}
+EXPORT_SYMBOL_GPL(__round_jiffies_relative);
+
+/**
+ * round_jiffies - function to round jiffies to a full second
+ * @j: the time in (absolute) jiffies that should be rounded
+ *
+ * round_jiffies() rounds an absolute time in the future (in jiffies)
+ * up or down to (approximately) full seconds. This is useful for timers
+ * for which the exact time they fire does not matter too much, as long as
+ * they fire approximately every X seconds.
+ *
+ * By rounding these timers to whole seconds, all such timers will fire
+ * at the same time, rather than at various times spread out. The goal
+ * of this is to have the CPU wake up less, which saves power.
+ *
+ * The return value is the rounded version of the @j parameter.
+ */
+unsigned long round_jiffies(unsigned long j)
+{
+ return __round_jiffies(j, raw_smp_processor_id());
+}
+EXPORT_SYMBOL_GPL(round_jiffies);
+
+/**
+ * round_jiffies_relative - function to round jiffies to a full second
+ * @j: the time in (relative) jiffies that should be rounded
+ *
+ * round_jiffies_relative() rounds a time delta in the future (in jiffies)
+ * up or down to (approximately) full seconds. This is useful for timers
+ * for which the exact time they fire does not matter too much, as long as
+ * they fire approximately every X seconds.
+ *
+ * By rounding these timers to whole seconds, all such timers will fire
+ * at the same time, rather than at various times spread out. The goal
+ * of this is to have the CPU wake up less, which saves power.
+ *
+ * The return value is the rounded version of the @j parameter.
+ */
+unsigned long round_jiffies_relative(unsigned long j)
+{
+ return __round_jiffies_relative(j, raw_smp_processor_id());
+}
+EXPORT_SYMBOL_GPL(round_jiffies_relative);
+
+
static inline void set_running_timer(tvec_base_t *base,
struct timer_list *timer)
{
* @timer: the timer to be modified
* @expires: new timeout in jiffies
*
- * mod_timer is a more efficient way to update the expire field of an
+ * mod_timer() is a more efficient way to update the expire field of an
* active timer (if the timer is inactive it will be activated)
*
* mod_timer(timer, expires) is equivalent to:
* the timer it also makes sure the handler has finished executing on other
* CPUs.
*
- * Synchronization rules: callers must prevent restarting of the timer,
+ * Synchronization rules: Callers must prevent restarting of the timer,
* otherwise this function is meaningless. It must not be called from
* interrupt contexts. The caller must not hold locks which would prevent
* completion of the timer's handler. The timer's handler must not call
clock = new;
clock->cycle_last = now;
printk(KERN_INFO "Time: %s clocksource has been installed.\n",
- clock->name);
+ clock->name);
return 1;
} else if (clock->update_callback) {
return clock->update_callback();
return 0;
}
#else
-#define change_clocksource() (0)
+static inline int change_clocksource(void)
+{
+ return 0;
+}
#endif
/**
* If the error is already larger, we look ahead even further
* to compensate for late or lost adjustments.
*/
-static __always_inline int clocksource_bigadjust(s64 error, s64 *interval, s64 *offset)
+static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,
+ s64 *offset)
{
s64 tick_error, i;
u32 look_ahead, adj;
* Now calculate the error in (1 << look_ahead) ticks, but first
* remove the single look ahead already included in the error.
*/
- tick_error = current_tick_length() >> (TICK_LENGTH_SHIFT - clock->shift + 1);
+ tick_error = current_tick_length() >>
+ (TICK_LENGTH_SHIFT - clock->shift + 1);
tick_error -= clock->xtime_interval >> 1;
error = ((error - tick_error) >> look_ahead) + tick_error;
clock->mult += adj;
clock->xtime_interval += interval;
clock->xtime_nsec -= offset;
- clock->error -= (interval - offset) << (TICK_LENGTH_SHIFT - clock->shift);
+ clock->error -= (interval - offset) <<
+ (TICK_LENGTH_SHIFT - clock->shift);
}
/**
unsigned long active_tasks; /* fixed-point */
static int count = LOAD_FREQ;
- active_tasks = count_active_tasks();
- for (count -= ticks; count < 0; count += LOAD_FREQ) {
- CALC_LOAD(avenrun[0], EXP_1, active_tasks);
- CALC_LOAD(avenrun[1], EXP_5, active_tasks);
- CALC_LOAD(avenrun[2], EXP_15, active_tasks);
+ count -= ticks;
+ if (unlikely(count < 0)) {
+ active_tasks = count_active_tasks();
+ do {
+ CALC_LOAD(avenrun[0], EXP_1, active_tasks);
+ CALC_LOAD(avenrun[1], EXP_5, active_tasks);
+ CALC_LOAD(avenrun[2], EXP_15, active_tasks);
+ count += LOAD_FREQ;
+ } while (count < 0);
}
}
* should never happens anyway). You just have the printk()
* that will tell you if something is gone wrong and where.
*/
- if (timeout < 0)
- {
+ if (timeout < 0) {
printk(KERN_ERR "schedule_timeout: wrong timeout "
- "value %lx from %p\n", timeout,
- __builtin_return_address(0));
+ "value %lx\n", timeout);
+ dump_stack();
current->state = TASK_RUNNING;
goto out;
}
}
/**
- * sys_sysinfo - fill in sysinfo struct
+ * do_sysinfo - fill in sysinfo struct
* @info: pointer to buffer to fill
*/
-asmlinkage long sys_sysinfo(struct sysinfo __user *info)
+int do_sysinfo(struct sysinfo *info)
{
- struct sysinfo val;
unsigned long mem_total, sav_total;
unsigned int mem_unit, bitcount;
unsigned long seq;
- memset((char *)&val, 0, sizeof(struct sysinfo));
+ memset(info, 0, sizeof(struct sysinfo));
do {
struct timespec tp;
tp.tv_nsec = tp.tv_nsec - NSEC_PER_SEC;
tp.tv_sec++;
}
- val.uptime = tp.tv_sec + (tp.tv_nsec ? 1 : 0);
+ info->uptime = tp.tv_sec + (tp.tv_nsec ? 1 : 0);
- val.loads[0] = avenrun[0] << (SI_LOAD_SHIFT - FSHIFT);
- val.loads[1] = avenrun[1] << (SI_LOAD_SHIFT - FSHIFT);
- val.loads[2] = avenrun[2] << (SI_LOAD_SHIFT - FSHIFT);
+ info->loads[0] = avenrun[0] << (SI_LOAD_SHIFT - FSHIFT);
+ info->loads[1] = avenrun[1] << (SI_LOAD_SHIFT - FSHIFT);
+ info->loads[2] = avenrun[2] << (SI_LOAD_SHIFT - FSHIFT);
- val.procs = nr_threads;
+ info->procs = nr_threads;
} while (read_seqretry(&xtime_lock, seq));
- si_meminfo(&val);
- si_swapinfo(&val);
+ si_meminfo(info);
+ si_swapinfo(info);
/*
* If the sum of all the available memory (i.e. ram + swap)
* -Erik Andersen <andersee@debian.org>
*/
- mem_total = val.totalram + val.totalswap;
- if (mem_total < val.totalram || mem_total < val.totalswap)
+ mem_total = info->totalram + info->totalswap;
+ if (mem_total < info->totalram || mem_total < info->totalswap)
goto out;
bitcount = 0;
- mem_unit = val.mem_unit;
+ mem_unit = info->mem_unit;
while (mem_unit > 1) {
bitcount++;
mem_unit >>= 1;
/*
* If mem_total did not overflow, multiply all memory values by
- * val.mem_unit and set it to 1. This leaves things compatible
+ * info->mem_unit and set it to 1. This leaves things compatible
* with 2.2.x, and also retains compatibility with earlier 2.4.x
* kernels...
*/
- val.mem_unit = 1;
- val.totalram <<= bitcount;
- val.freeram <<= bitcount;
- val.sharedram <<= bitcount;
- val.bufferram <<= bitcount;
- val.totalswap <<= bitcount;
- val.freeswap <<= bitcount;
- val.totalhigh <<= bitcount;
- val.freehigh <<= bitcount;
+ info->mem_unit = 1;
+ info->totalram <<= bitcount;
+ info->freeram <<= bitcount;
+ info->sharedram <<= bitcount;
+ info->bufferram <<= bitcount;
+ info->totalswap <<= bitcount;
+ info->freeswap <<= bitcount;
+ info->totalhigh <<= bitcount;
+ info->freehigh <<= bitcount;
+
+out:
+ return 0;
+}
+
+asmlinkage long sys_sysinfo(struct sysinfo __user *info)
+{
+ struct sysinfo val;
+
+ do_sysinfo(&val);
- out:
if (copy_to_user(info, &val, sizeof(struct sysinfo)))
return -EFAULT;
static struct time_interpolator *time_interpolator_list __read_mostly;
static DEFINE_SPINLOCK(time_interpolator_lock);
-static inline u64 time_interpolator_get_cycles(unsigned int src)
+static inline cycles_t time_interpolator_get_cycles(unsigned int src)
{
unsigned long (*x)(void);
if (time_interpolator->jitter)
{
- u64 lcycle;
- u64 now;
+ cycles_t lcycle;
+ cycles_t now;
do {
lcycle = time_interpolator->last_cycle;