#include <linux/fs.h> /* for struct file_operations */
#include <linux/completion.h> /* for struct completion */
#include <linux/sched.h> /* for current && schedule_timeout */
+#include <linux/mutex.h> /* for struct mutex */
struct usb_device;
struct usb_driver;
* number from the USB core by calling usb_register_dev().
* @condition: binding state of the interface: not bound, binding
* (in probe()), bound to a driver, or unbinding (in disconnect())
+ * @is_active: flag set when the interface is bound and not suspended.
+ * @needs_remote_wakeup: flag set when the driver requires remote-wakeup
+ * capability during autosuspend.
* @dev: driver model's view of this device
* @class_dev: driver model's class view of this device.
+ * @pm_usage_cnt: PM usage counter for this interface; autosuspend is not
+ * allowed unless the counter is 0.
*
* USB device drivers attach to interfaces on a physical device. Each
* interface encapsulates a single high level function, such as feeding
int minor; /* minor number this interface is
* bound to */
enum usb_interface_condition condition; /* state of binding */
+ unsigned is_active:1; /* the interface is not suspended */
+ unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
+
struct device dev; /* interface specific device info */
struct class_device *class_dev;
+ int pm_usage_cnt; /* usage counter for autosuspend */
};
#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
#define interface_to_usbdev(intf) \
/* ----------------------------------------------------------------------- */
-struct usb_operations;
-
/* USB device number allocation bitmap */
struct usb_devmap {
unsigned long devicemap[128 / (8*sizeof(unsigned long))];
struct device *controller; /* host/master side hardware */
int busnum; /* Bus number (in order of reg) */
char *bus_name; /* stable id (PCI slot_name etc) */
+ u8 uses_dma; /* Does the host controller use DMA? */
u8 otg_port; /* 0, or number of OTG/HNP port */
unsigned is_b_host:1; /* true during some HNP roleswitches */
unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
* round-robin allocation */
struct usb_devmap devmap; /* device address allocation map */
- struct usb_operations *op; /* Operations (specific to the HC) */
struct usb_device *root_hub; /* Root hub */
struct list_head bus_list; /* list of busses */
- void *hcpriv; /* Host Controller private data */
int bandwidth_allocated; /* on this bus: how much of the time
* reserved for periodic (intr/iso)
struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */
struct class_device *class_dev; /* class device for this bus */
- struct kref kref; /* reference counting for this bus */
- void (*release)(struct usb_bus *bus);
#if defined(CONFIG_USB_MON)
struct mon_bus *mon_bus; /* non-null when associated */
/* This is arbitrary.
* From USB 2.0 spec Table 11-13, offset 7, a hub can
* have up to 255 ports. The most yet reported is 10.
+ *
+ * Current Wireless USB host hardware (Intel i1480 for example) allows
+ * up to 22 devices to connect. Upcoming hardware might raise that
+ * limit. Because the arrays need to add a bit for hub status data, we
+ * do 31, so plus one evens out to four bytes.
*/
-#define USB_MAXCHILDREN (16)
+#define USB_MAXCHILDREN (31)
struct usb_tt;
unsigned short bus_mA; /* Current available from the bus */
u8 portnum; /* Parent port number (origin 1) */
+ u8 level; /* Number of USB hub ancestors */
- int have_langid; /* whether string_langid is valid */
+ unsigned discon_suspended:1; /* Disconnected while suspended */
+ unsigned have_langid:1; /* whether string_langid is valid */
int string_langid; /* language ID for strings */
/* static strings from the device */
int maxchild; /* Number of ports if hub */
struct usb_device *children[USB_MAXCHILDREN];
+
+ int pm_usage_cnt; /* usage counter for autosuspend */
+#ifdef CONFIG_PM
+ struct delayed_work autosuspend; /* for delayed autosuspends */
+ struct mutex pm_mutex; /* protects PM operations */
+
+ unsigned auto_pm:1; /* autosuspend/resume in progress */
+ unsigned do_remote_wakeup:1; /* remote wakeup should be enabled */
+#endif
};
#define to_usb_device(d) container_of(d, struct usb_device, dev)
#define usb_unlock_device(udev) up(&(udev)->dev.sem)
#define usb_trylock_device(udev) down_trylock(&(udev)->dev.sem)
extern int usb_lock_device_for_reset(struct usb_device *udev,
- struct usb_interface *iface);
+ const struct usb_interface *iface);
/* USB port reset for device reinitialization */
extern int usb_reset_device(struct usb_device *dev);
extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
+/* USB autosuspend and autoresume */
+#ifdef CONFIG_USB_SUSPEND
+extern int usb_autopm_set_interface(struct usb_interface *intf);
+extern int usb_autopm_get_interface(struct usb_interface *intf);
+extern void usb_autopm_put_interface(struct usb_interface *intf);
+
+static inline void usb_autopm_enable(struct usb_interface *intf)
+{
+ intf->pm_usage_cnt = 0;
+ usb_autopm_set_interface(intf);
+}
+
+static inline void usb_autopm_disable(struct usb_interface *intf)
+{
+ intf->pm_usage_cnt = 1;
+ usb_autopm_set_interface(intf);
+}
+
+#else
+
+static inline int usb_autopm_set_interface(struct usb_interface *intf)
+{ return 0; }
+
+static inline int usb_autopm_get_interface(struct usb_interface *intf)
+{ return 0; }
+
+static inline void usb_autopm_put_interface(struct usb_interface *intf)
+{ }
+static inline void usb_autopm_enable(struct usb_interface *intf)
+{ }
+static inline void usb_autopm_disable(struct usb_interface *intf)
+{ }
+#endif
+
/*-------------------------------------------------------------------------*/
/* for drivers using iso endpoints */
extern struct usb_interface *usb_find_interface(struct usb_driver *drv,
int minor);
-extern struct usb_interface *usb_ifnum_to_if(struct usb_device *dev,
+extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
unsigned ifnum);
extern struct usb_host_interface *usb_altnum_to_altsetting(
- struct usb_interface *intf, unsigned int altnum);
+ const struct usb_interface *intf, unsigned int altnum);
/**
/*-------------------------------------------------------------------------*/
+/**
+ * usb_endpoint_dir_in - check if the endpoint has IN direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type IN, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
+}
+
+/**
+ * usb_endpoint_dir_out - check if the endpoint has OUT direction
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type OUT, otherwise it returns false.
+ */
+static inline int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+}
+
+/**
+ * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type bulk, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK);
+}
+
+/**
+ * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type interrupt, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_INT);
+}
+
+/**
+ * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type isochronous, otherwise it returns
+ * false.
+ */
+static inline int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC);
+}
+
+/**
+ * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd));
+}
+
+/**
+ * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has bulk transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd));
+}
+
+/**
+ * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd));
+}
+
+/**
+ * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has interrupt transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd));
+}
+
+/**
+ * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and IN direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd));
+}
+
+/**
+ * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint has isochronous transfer type and OUT direction,
+ * otherwise it returns false.
+ */
+static inline int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd)
+{
+ return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd));
+}
+
+/*-------------------------------------------------------------------------*/
+
#define USB_DEVICE_ID_MATCH_DEVICE \
(USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
#define USB_DEVICE_ID_MATCH_DEV_RANGE \
};
/**
- * struct usb_driver - identifies USB driver to usbcore
+ * struct usbdrv_wrap - wrapper for driver-model structure
+ * @driver: The driver-model core driver structure.
+ * @for_devices: Non-zero for device drivers, 0 for interface drivers.
+ */
+struct usbdrv_wrap {
+ struct device_driver driver;
+ int for_devices;
+};
+
+/**
+ * struct usb_driver - identifies USB interface driver to usbcore
* @name: The driver name should be unique among USB drivers,
* and should normally be the same as the module name.
* @probe: Called to see if the driver is willing to manage a particular
* or your driver's probe function will never get called.
* @dynids: used internally to hold the list of dynamically added device
* ids for this driver.
- * @driver: the driver model core driver structure.
+ * @drvwrap: Driver-model core structure wrapper.
* @no_dynamic_id: if set to 1, the USB core will not allow dynamic ids to be
* added to this driver by preventing the sysfs file from being created.
+ * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
+ * for interfaces bound to this driver.
*
- * USB drivers must provide a name, probe() and disconnect() methods,
- * and an id_table. Other driver fields are optional.
+ * USB interface drivers must provide a name, probe() and disconnect()
+ * methods, and an id_table. Other driver fields are optional.
*
* The id_table is used in hotplugging. It holds a set of descriptors,
* and specialized data may be associated with each entry. That table
const struct usb_device_id *id_table;
struct usb_dynids dynids;
- struct device_driver driver;
+ struct usbdrv_wrap drvwrap;
unsigned int no_dynamic_id:1;
+ unsigned int supports_autosuspend:1;
};
-#define to_usb_driver(d) container_of(d, struct usb_driver, driver)
+#define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver)
+
+/**
+ * struct usb_device_driver - identifies USB device driver to usbcore
+ * @name: The driver name should be unique among USB drivers,
+ * and should normally be the same as the module name.
+ * @probe: Called to see if the driver is willing to manage a particular
+ * device. If it is, probe returns zero and uses dev_set_drvdata()
+ * to associate driver-specific data with the device. If unwilling
+ * to manage the device, return a negative errno value.
+ * @disconnect: Called when the device is no longer accessible, usually
+ * because it has been (or is being) disconnected or the driver's
+ * module is being unloaded.
+ * @suspend: Called when the device is going to be suspended by the system.
+ * @resume: Called when the device is being resumed by the system.
+ * @drvwrap: Driver-model core structure wrapper.
+ * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
+ * for devices bound to this driver.
+ *
+ * USB drivers must provide all the fields listed above except drvwrap.
+ */
+struct usb_device_driver {
+ const char *name;
+
+ int (*probe) (struct usb_device *udev);
+ void (*disconnect) (struct usb_device *udev);
+
+ int (*suspend) (struct usb_device *udev, pm_message_t message);
+ int (*resume) (struct usb_device *udev);
+ struct usbdrv_wrap drvwrap;
+ unsigned int supports_autosuspend:1;
+};
+#define to_usb_device_driver(d) container_of(d, struct usb_device_driver, \
+ drvwrap.driver)
extern struct bus_type usb_bus_type;
* use these in module_init()/module_exit()
* and don't forget MODULE_DEVICE_TABLE(usb, ...)
*/
-int usb_register_driver(struct usb_driver *, struct module *);
+extern int usb_register_driver(struct usb_driver *, struct module *);
static inline int usb_register(struct usb_driver *driver)
{
return usb_register_driver(driver, THIS_MODULE);
}
extern void usb_deregister(struct usb_driver *);
+extern int usb_register_device_driver(struct usb_device_driver *,
+ struct module *);
+extern void usb_deregister_device_driver(struct usb_device_driver *);
+
extern int usb_register_dev(struct usb_interface *intf,
struct usb_class_driver *class_driver);
extern void usb_deregister_dev(struct usb_interface *intf,
};
struct urb;
-struct pt_regs;
-typedef void (*usb_complete_t)(struct urb *, struct pt_regs *);
+typedef void (*usb_complete_t)(struct urb *);
/**
* struct urb - USB Request Block
* @setup_packet: pointer to the setup_packet buffer
* @transfer_buffer: pointer to the transfer buffer
* @buffer_length: length of the transfer buffer
- * @complete: pointer to the usb_complete_t function
+ * @complete_fn: pointer to the usb_complete_t function
* @context: what to set the urb context to.
*
* Initializes a control urb with the proper information needed to submit
unsigned char *setup_packet,
void *transfer_buffer,
int buffer_length,
- usb_complete_t complete,
+ usb_complete_t complete_fn,
void *context)
{
spin_lock_init(&urb->lock);
urb->setup_packet = setup_packet;
urb->transfer_buffer = transfer_buffer;
urb->transfer_buffer_length = buffer_length;
- urb->complete = complete;
+ urb->complete = complete_fn;
urb->context = context;
}
* @pipe: the endpoint pipe
* @transfer_buffer: pointer to the transfer buffer
* @buffer_length: length of the transfer buffer
- * @complete: pointer to the usb_complete_t function
+ * @complete_fn: pointer to the usb_complete_t function
* @context: what to set the urb context to.
*
* Initializes a bulk urb with the proper information needed to submit it
unsigned int pipe,
void *transfer_buffer,
int buffer_length,
- usb_complete_t complete,
+ usb_complete_t complete_fn,
void *context)
{
spin_lock_init(&urb->lock);
urb->pipe = pipe;
urb->transfer_buffer = transfer_buffer;
urb->transfer_buffer_length = buffer_length;
- urb->complete = complete;
+ urb->complete = complete_fn;
urb->context = context;
}
* @pipe: the endpoint pipe
* @transfer_buffer: pointer to the transfer buffer
* @buffer_length: length of the transfer buffer
- * @complete: pointer to the usb_complete_t function
+ * @complete_fn: pointer to the usb_complete_t function
* @context: what to set the urb context to.
* @interval: what to set the urb interval to, encoded like
* the endpoint descriptor's bInterval value.
unsigned int pipe,
void *transfer_buffer,
int buffer_length,
- usb_complete_t complete,
+ usb_complete_t complete_fn,
void *context,
int interval)
{
urb->pipe = pipe;
urb->transfer_buffer = transfer_buffer;
urb->transfer_buffer_length = buffer_length;
- urb->complete = complete;
+ urb->complete = complete_fn;
urb->context = context;
if (dev->speed == USB_SPEED_HIGH)
urb->interval = 1 << (interval - 1);
extern int usb_unlink_urb(struct urb *urb);
extern void usb_kill_urb(struct urb *urb);
-#define HAVE_USB_BUFFERS
void *usb_buffer_alloc (struct usb_device *dev, size_t size,
gfp_t mem_flags, dma_addr_t *dma);
void usb_buffer_free (struct usb_device *dev, size_t size,
#endif
struct scatterlist;
-int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int nents);
+int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int nents);
#if 0
-void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int n_hw_ents);
+void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int n_hw_ents);
#endif
-void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int n_hw_ents);
+void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int n_hw_ents);
/*-------------------------------------------------------------------*
* SYNCHRONOUS CALL SUPPORT *
extern int usb_reset_configuration(struct usb_device *dev);
extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+/* this request isn't really synchronous, but it belongs with the others */
+extern int usb_driver_set_configuration(struct usb_device *udev, int config);
+
/*
* timeouts, in milliseconds, used for sending/receiving control messages
* they typically complete within a few frames (msec) after they're issued
projects / linux-drm-fsl-dcu.git / blobdiff