#include <linux/ioport.h>
#include <linux/acpi.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/spi.h>
+
static void spidev_release(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
}
+static DEVICE_ATTR_RO(modalias);
-static struct device_attribute spi_dev_attrs[] = {
- __ATTR_RO(modalias),
- __ATTR_NULL,
+static struct attribute *spi_dev_attrs[] = {
+ &dev_attr_modalias.attr,
+ NULL,
};
+ATTRIBUTE_GROUPS(spi_dev);
/* modalias support makes "modprobe $MODALIAS" new-style hotplug work,
* and the sysfs version makes coldplug work too.
struct bus_type spi_bus_type = {
.name = "spi",
- .dev_attrs = spi_dev_attrs,
+ .dev_groups = spi_dev_groups,
.match = spi_match_device,
.uevent = spi_uevent,
.pm = &spi_pm,
static int spi_drv_probe(struct device *dev)
{
const struct spi_driver *sdrv = to_spi_driver(dev->driver);
+ struct spi_device *spi = to_spi_device(dev);
+ int ret;
+
+ acpi_dev_pm_attach(&spi->dev, true);
+ ret = sdrv->probe(spi);
+ if (ret)
+ acpi_dev_pm_detach(&spi->dev, true);
- return sdrv->probe(to_spi_device(dev));
+ return ret;
}
static int spi_drv_remove(struct device *dev)
{
const struct spi_driver *sdrv = to_spi_driver(dev->driver);
+ struct spi_device *spi = to_spi_device(dev);
+ int ret;
+
+ ret = sdrv->remove(spi);
+ acpi_dev_pm_detach(&spi->dev, true);
- return sdrv->remove(to_spi_device(dev));
+ return ret;
}
static void spi_drv_shutdown(struct device *dev)
if (!spi_master_get(master))
return NULL;
- spi = kzalloc(sizeof *spi, GFP_KERNEL);
+ spi = kzalloc(sizeof(*spi), GFP_KERNEL);
if (!spi) {
dev_err(dev, "cannot alloc spi_device\n");
spi_master_put(master);
}
EXPORT_SYMBOL_GPL(spi_alloc_device);
+static void spi_dev_set_name(struct spi_device *spi)
+{
+ struct acpi_device *adev = ACPI_COMPANION(&spi->dev);
+
+ if (adev) {
+ dev_set_name(&spi->dev, "spi-%s", acpi_dev_name(adev));
+ return;
+ }
+
+ dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->master->dev),
+ spi->chip_select);
+}
+
/**
* spi_add_device - Add spi_device allocated with spi_alloc_device
* @spi: spi_device to register
}
/* Set the bus ID string */
- dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->master->dev),
- spi->chip_select);
-
+ spi_dev_set_name(spi);
/* We need to make sure there's no other device with this
* chipselect **BEFORE** we call setup(), else we'll trash
/*-------------------------------------------------------------------------*/
+static void spi_set_cs(struct spi_device *spi, bool enable)
+{
+ if (spi->mode & SPI_CS_HIGH)
+ enable = !enable;
+
+ if (spi->cs_gpio >= 0)
+ gpio_set_value(spi->cs_gpio, !enable);
+ else if (spi->master->set_cs)
+ spi->master->set_cs(spi, !enable);
+}
+
+/*
+ * spi_transfer_one_message - Default implementation of transfer_one_message()
+ *
+ * This is a standard implementation of transfer_one_message() for
+ * drivers which impelment a transfer_one() operation. It provides
+ * standard handling of delays and chip select management.
+ */
+static int spi_transfer_one_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct spi_transfer *xfer;
+ bool cur_cs = true;
+ bool keep_cs = false;
+ int ret = 0;
+
+ spi_set_cs(msg->spi, true);
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ trace_spi_transfer_start(msg, xfer);
+
+ reinit_completion(&master->xfer_completion);
+
+ ret = master->transfer_one(master, msg->spi, xfer);
+ if (ret < 0) {
+ dev_err(&msg->spi->dev,
+ "SPI transfer failed: %d\n", ret);
+ goto out;
+ }
+
+ if (ret > 0)
+ wait_for_completion(&master->xfer_completion);
+
+ trace_spi_transfer_stop(msg, xfer);
+
+ if (msg->status != -EINPROGRESS)
+ goto out;
+
+ if (xfer->delay_usecs)
+ udelay(xfer->delay_usecs);
+
+ if (xfer->cs_change) {
+ if (list_is_last(&xfer->transfer_list,
+ &msg->transfers)) {
+ keep_cs = true;
+ } else {
+ cur_cs = !cur_cs;
+ spi_set_cs(msg->spi, cur_cs);
+ }
+ }
+
+ msg->actual_length += xfer->len;
+ }
+
+out:
+ if (ret != 0 || !keep_cs)
+ spi_set_cs(msg->spi, false);
+
+ if (msg->status == -EINPROGRESS)
+ msg->status = ret;
+
+ spi_finalize_current_message(master);
+
+ return ret;
+}
+
+/**
+ * spi_finalize_current_transfer - report completion of a transfer
+ *
+ * Called by SPI drivers using the core transfer_one_message()
+ * implementation to notify it that the current interrupt driven
+ * transfer has finised and the next one may be scheduled.
+ */
+void spi_finalize_current_transfer(struct spi_master *master)
+{
+ complete(&master->xfer_completion);
+}
+EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
+
/**
* spi_pump_messages - kthread work function which processes spi message queue
* @work: pointer to kthread work struct contained in the master struct
pm_runtime_mark_last_busy(master->dev.parent);
pm_runtime_put_autosuspend(master->dev.parent);
}
+ trace_spi_master_idle(master);
return;
}
}
}
+ if (!was_busy)
+ trace_spi_master_busy(master);
+
if (!was_busy && master->prepare_transfer_hardware) {
ret = master->prepare_transfer_hardware(master);
if (ret) {
}
}
+ trace_spi_message_start(master->cur_msg);
+
+ if (master->prepare_message) {
+ ret = master->prepare_message(master, master->cur_msg);
+ if (ret) {
+ dev_err(&master->dev,
+ "failed to prepare message: %d\n", ret);
+ master->cur_msg->status = ret;
+ spi_finalize_current_message(master);
+ return;
+ }
+ master->cur_msg_prepared = true;
+ }
+
ret = master->transfer_one_message(master, master->cur_msg);
if (ret) {
dev_err(&master->dev,
{
struct spi_message *mesg;
unsigned long flags;
+ int ret;
spin_lock_irqsave(&master->queue_lock, flags);
mesg = master->cur_msg;
queue_kthread_work(&master->kworker, &master->pump_messages);
spin_unlock_irqrestore(&master->queue_lock, flags);
+ if (master->cur_msg_prepared && master->unprepare_message) {
+ ret = master->unprepare_message(master, mesg);
+ if (ret) {
+ dev_err(&master->dev,
+ "failed to unprepare message: %d\n", ret);
+ }
+ }
+ master->cur_msg_prepared = false;
+
mesg->state = NULL;
if (mesg->complete)
mesg->complete(mesg->context);
+
+ trace_spi_message_done(mesg);
}
EXPORT_SYMBOL_GPL(spi_finalize_current_message);
master->queued = true;
master->transfer = spi_queued_transfer;
+ if (!master->transfer_one_message)
+ master->transfer_one_message = spi_transfer_one_message;
/* Initialize and start queue */
ret = spi_init_queue(master);
{
struct spi_device *spi;
struct device_node *nc;
- const __be32 *prop;
- char modalias[SPI_NAME_SIZE + 4];
int rc;
- int len;
+ u32 value;
if (!master->dev.of_node)
return;
}
/* Device address */
- prop = of_get_property(nc, "reg", &len);
- if (!prop || len < sizeof(*prop)) {
- dev_err(&master->dev, "%s has no 'reg' property\n",
- nc->full_name);
+ rc = of_property_read_u32(nc, "reg", &value);
+ if (rc) {
+ dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
+ nc->full_name, rc);
spi_dev_put(spi);
continue;
}
- spi->chip_select = be32_to_cpup(prop);
+ spi->chip_select = value;
/* Mode (clock phase/polarity/etc.) */
if (of_find_property(nc, "spi-cpha", NULL))
spi->mode |= SPI_3WIRE;
/* Device DUAL/QUAD mode */
- prop = of_get_property(nc, "spi-tx-bus-width", &len);
- if (prop && len == sizeof(*prop)) {
- switch (be32_to_cpup(prop)) {
- case SPI_NBITS_SINGLE:
+ if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
+ switch (value) {
+ case 1:
break;
- case SPI_NBITS_DUAL:
+ case 2:
spi->mode |= SPI_TX_DUAL;
break;
- case SPI_NBITS_QUAD:
+ case 4:
spi->mode |= SPI_TX_QUAD;
break;
default:
dev_err(&master->dev,
"spi-tx-bus-width %d not supported\n",
- be32_to_cpup(prop));
+ value);
spi_dev_put(spi);
continue;
}
}
- prop = of_get_property(nc, "spi-rx-bus-width", &len);
- if (prop && len == sizeof(*prop)) {
- switch (be32_to_cpup(prop)) {
- case SPI_NBITS_SINGLE:
+ if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
+ switch (value) {
+ case 1:
break;
- case SPI_NBITS_DUAL:
+ case 2:
spi->mode |= SPI_RX_DUAL;
break;
- case SPI_NBITS_QUAD:
+ case 4:
spi->mode |= SPI_RX_QUAD;
break;
default:
dev_err(&master->dev,
"spi-rx-bus-width %d not supported\n",
- be32_to_cpup(prop));
+ value);
spi_dev_put(spi);
continue;
}
}
/* Device speed */
- prop = of_get_property(nc, "spi-max-frequency", &len);
- if (!prop || len < sizeof(*prop)) {
- dev_err(&master->dev, "%s has no 'spi-max-frequency' property\n",
- nc->full_name);
+ rc = of_property_read_u32(nc, "spi-max-frequency", &value);
+ if (rc) {
+ dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n",
+ nc->full_name, rc);
spi_dev_put(spi);
continue;
}
- spi->max_speed_hz = be32_to_cpup(prop);
+ spi->max_speed_hz = value;
/* IRQ */
spi->irq = irq_of_parse_and_map(nc, 0);
spi->dev.of_node = nc;
/* Register the new device */
- snprintf(modalias, sizeof(modalias), "%s%s", SPI_MODULE_PREFIX,
- spi->modalias);
- request_module(modalias);
+ request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias);
rc = spi_add_device(spi);
if (rc) {
dev_err(&master->dev, "spi_device register error %s\n",
return AE_NO_MEMORY;
}
- ACPI_HANDLE_SET(&spi->dev, handle);
+ ACPI_COMPANION_SET(&spi->dev, adev);
spi->irq = -1;
INIT_LIST_HEAD(&resource_list);
return AE_OK;
}
- strlcpy(spi->modalias, dev_name(&adev->dev), sizeof(spi->modalias));
+ adev->power.flags.ignore_parent = true;
+ strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias));
if (spi_add_device(spi)) {
+ adev->power.flags.ignore_parent = false;
dev_err(&master->dev, "failed to add SPI device %s from ACPI\n",
dev_name(&adev->dev));
spi_dev_put(spi);
if (!dev)
return NULL;
- master = kzalloc(size + sizeof *master, GFP_KERNEL);
+ master = kzalloc(size + sizeof(*master), GFP_KERNEL);
if (!master)
return NULL;
return 0;
nb = of_gpio_named_count(np, "cs-gpios");
- master->num_chipselect = max(nb, (int)master->num_chipselect);
+ master->num_chipselect = max_t(int, nb, master->num_chipselect);
/* Return error only for an incorrectly formed cs-gpios property */
if (nb == 0 || nb == -ENOENT)
spin_lock_init(&master->bus_lock_spinlock);
mutex_init(&master->bus_lock_mutex);
master->bus_lock_flag = 0;
+ init_completion(&master->xfer_completion);
/* register the device, then userspace will see it.
* registration fails if the bus ID is in use.
}
EXPORT_SYMBOL_GPL(spi_register_master);
+static void devm_spi_unregister(struct device *dev, void *res)
+{
+ spi_unregister_master(*(struct spi_master **)res);
+}
+
+/**
+ * dev_spi_register_master - register managed SPI master controller
+ * @dev: device managing SPI master
+ * @master: initialized master, originally from spi_alloc_master()
+ * Context: can sleep
+ *
+ * Register a SPI device as with spi_register_master() which will
+ * automatically be unregister
+ */
+int devm_spi_register_master(struct device *dev, struct spi_master *master)
+{
+ struct spi_master **ptr;
+ int ret;
+
+ ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return -ENOMEM;
+
+ ret = spi_register_master(master);
+ if (!ret) {
+ *ptr = master;
+ devres_add(dev, ptr);
+ } else {
+ devres_free(ptr);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(devm_spi_register_master);
+
static int __unregister(struct device *dev, void *null)
{
spi_unregister_device(to_spi_device(dev));
if (spi->master->setup)
status = spi->master->setup(spi);
- dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s"
- "%u bits/w, %u Hz max --> %d\n",
+ dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
(int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
(spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
(spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
struct spi_master *master = spi->master;
struct spi_transfer *xfer;
+ message->spi = spi;
+
+ trace_spi_message_submit(message);
+
if (list_empty(&message->transfers))
return -EINVAL;
if (!message->complete)
}
}
- message->spi = spi;
message->status = -EINPROGRESS;
return master->transfer(spi, message);
}
EXPORT_SYMBOL_GPL(spi_bus_unlock);
/* portable code must never pass more than 32 bytes */
-#define SPI_BUFSIZ max(32,SMP_CACHE_BYTES)
+#define SPI_BUFSIZ max(32, SMP_CACHE_BYTES)
static u8 *buf;
}
spi_message_init(&message);
- memset(x, 0, sizeof x);
+ memset(x, 0, sizeof(x));
if (n_tx) {
x[0].len = n_tx;
spi_message_add_tail(&x[0], &message);
projects / linux-drm-fsl-dcu.git / blobdiff