Merge git://oss.sgi.com:8090/xfs/xfs-2.6

[linux-drm-fsl-dcu.git] / drivers / serial / 8250.c

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index cc2a205d42300af96e6f0ecfda63172c5e151425..2964ca9df5a010f9cebb264e4115d5a588e5c234 100644 (file)
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -920,12 +920,16 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 #ifdef __i386__
                outb(0xff, 0x080);
 #endif
-               scratch2 = serial_inp(up, UART_IER);
+               /*
+                * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
+                * 16C754B) allow only to modify them if an EFR bit is set.
+                */
+               scratch2 = serial_inp(up, UART_IER) & 0x0f;
                serial_outp(up, UART_IER, 0x0F);
 #ifdef __i386__
                outb(0, 0x080);
 #endif
-               scratch3 = serial_inp(up, UART_IER);
+               scratch3 = serial_inp(up, UART_IER) & 0x0f;
                serial_outp(up, UART_IER, scratch);
                if (scratch2 != 0 || scratch3 != 0x0F) {
                        /*
@@ -1175,7 +1179,7 @@ static void serial8250_enable_ms(struct uart_port *port)
 }
 
 static void
-receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs)
+receive_chars(struct uart_8250_port *up, int *status)
 {
        struct tty_struct *tty = up->port.info->tty;
        unsigned char ch, lsr = *status;
@@ -1233,7 +1237,7 @@ receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs)
                        else if (lsr & UART_LSR_FE)
                                flag = TTY_FRAME;
                }
-               if (uart_handle_sysrq_char(&up->port, ch, regs))
+               if (uart_handle_sysrq_char(&up->port, ch))
                        goto ignore_char;
 
                uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
@@ -1309,7 +1313,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
  * This handles the interrupt from one port.
  */
 static inline void
-serial8250_handle_port(struct uart_8250_port *up, struct pt_regs *regs)
+serial8250_handle_port(struct uart_8250_port *up)
 {
        unsigned int status;
 
@@ -1320,7 +1324,7 @@ serial8250_handle_port(struct uart_8250_port *up, struct pt_regs *regs)
        DEBUG_INTR("status = %x...", status);
 
        if (status & UART_LSR_DR)
-               receive_chars(up, &status, regs);
+               receive_chars(up, &status);
        check_modem_status(up);
        if (status & UART_LSR_THRE)
                transmit_chars(up);
@@ -1342,7 +1346,7 @@ serial8250_handle_port(struct uart_8250_port *up, struct pt_regs *regs)
  * This means we need to loop through all ports. checking that they
  * don't have an interrupt pending.
  */
-static irqreturn_t serial8250_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
 {
        struct irq_info *i = dev_id;
        struct list_head *l, *end = NULL;
@@ -1361,7 +1365,7 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id, struct pt_regs *r
 
                iir = serial_in(up, UART_IIR);
                if (!(iir & UART_IIR_NO_INT)) {
-                       serial8250_handle_port(up, regs);
+                       serial8250_handle_port(up);
 
                        handled = 1;
 
@@ -1461,7 +1465,7 @@ static void serial8250_timeout(unsigned long data)
 
        iir = serial_in(up, UART_IIR);
        if (!(iir & UART_IIR_NO_INT))
-               serial8250_handle_port(up, NULL);
+               serial8250_handle_port(up);
 
        timeout = up->port.timeout;
        timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
@@ -1763,8 +1767,8 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int
 }
 
 static void
-serial8250_set_termios(struct uart_port *port, struct termios *termios,
-                      struct termios *old)
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+                      struct ktermios *old)
 {
        struct uart_8250_port *up = (struct uart_8250_port *)port;
        unsigned char cval, fcr = 0;
@@ -2296,7 +2300,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
        local_irq_restore(flags);
 }
 
-static int serial8250_console_setup(struct console *co, char *options)
+static int __init serial8250_console_setup(struct console *co, char *options)
 {
        struct uart_port *port;
        int baud = 9600;