* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
+ *
*/
#include <linux/kernel.h>
#include <linux/libata.h>
#define DRV_NAME "sc1200"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.4"
#define SC1200_REV_A 0x00
#define SC1200_REV_B1 0x01
* Return the PCI bus clocking for the SC1200 chipset configuration
* in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz
*/
-
+
static int sc1200_clock(void)
{
/* Magic registers that give us the chipset data */
u8 chip_id = inb(0x903C);
u8 silicon_rev = inb(0x903D);
u16 pci_clock;
-
+
if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1)
return 0; /* 33 MHz mode */
*
* Set our PIO requirements. This is fairly simple on the SC1200
*/
-
+
static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static const u32 pio_timings[4][5] = {
u32 format;
unsigned int reg = 0x40 + 0x10 * ap->port_no;
int mode = adev->pio_mode - XFER_PIO_0;
-
+
pci_read_config_dword(pdev, reg + 4, &format);
format >>= 31;
format += sc1200_clock();
- pci_write_config_dword(pdev, reg + 8 * adev->devno,
+ pci_write_config_dword(pdev, reg + 8 * adev->devno,
pio_timings[format][mode]);
}
* We cannot mix MWDMA and UDMA without reloading timings each switch
* master to slave.
*/
-
+
static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
static const u32 udma_timing[3][3] = {
{ 0x00932470, 0x00922260, 0x00922140 },
{ 0x009436A1, 0x00933481, 0x00923261 }
};
-
+
static const u32 mwdma_timing[3][3] = {
{ 0x00077771, 0x00012121, 0x00002020 },
{ 0x000BBBB2, 0x00024241, 0x00013131 },
{ 0x000FFFF3, 0x00035352, 0x00015151 }
};
-
+
int clock = sc1200_clock();
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int reg = 0x40 + 0x10 * ap->port_no;
format = udma_timing[clock][mode - XFER_UDMA_0];
else
format = mwdma_timing[clock][mode - XFER_MW_DMA_0];
-
+
if (adev->devno == 0) {
u32 timings;
-
+
pci_read_config_dword(pdev, reg + 4, &timings);
timings &= 0x80000000UL;
timings |= format;
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
static struct ata_port_operations sc1200_port_ops = {
.set_piomode = sc1200_set_piomode,
.set_dmamode = sc1200_set_dmamode,
.mode_filter = ata_pci_default_filter,
-
+
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.qc_prep = ata_qc_prep,
.qc_issue = sc1200_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
- .data_xfer = ata_pio_data_xfer,
+
+ .data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+ .irq_ack = ata_irq_ack,
.port_start = ata_port_start,
- .port_stop = ata_port_stop,
- .host_stop = ata_host_stop
-};
+};
/**
* sc1200_init_one - Initialise an SC1200
* Just throw the needed data at the libata helper and it does all
* our work.
*/
-
+
static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static struct ata_port_info info = {
.port_ops = &sc1200_port_ops
};
static struct ata_port_info *port_info[2] = { &info, &info };
-
+
/* Can't enable port 2 yet, see top comments */
return ata_pci_init_one(dev, port_info, 1);
}
-static struct pci_device_id sc1200[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_IDE), },
- { 0, },
+static const struct pci_device_id sc1200[] = {
+ { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_IDE), },
+
+ { },
};
static struct pci_driver sc1200_pci_driver = {
- .name = DRV_NAME,
+ .name = DRV_NAME,
.id_table = sc1200,
.probe = sc1200_init_one,
- .remove = ata_pci_remove_one
+ .remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
};
static int __init sc1200_init(void)
return pci_register_driver(&sc1200_pci_driver);
}
-
static void __exit sc1200_exit(void)
{
pci_unregister_driver(&sc1200_pci_driver);
}
-
MODULE_AUTHOR("Alan Cox, Mark Lord");
MODULE_DESCRIPTION("low-level driver for the NS/AMD SC1200");
MODULE_LICENSE("GPL");