Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

[linux-drm-fsl-dcu.git] / arch / sh / mm / init.c

diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 8ea27ca4b700c1c080cfa3de90d9617f7a0b34a8..bf0c263cb6fd036ec3f3f9e971799dc41f18fa56 100644 (file)
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -24,7 +24,7 @@
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
 #include <linux/pagemap.h>
-
+#include <linux/proc_fs.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -77,26 +77,30 @@ void show_mem(void)
        printk("%d pages swap cached\n",cached);
 }
 
+#ifdef CONFIG_MMU
 static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 {
        pgd_t *pgd;
+       pud_t *pud;
        pmd_t *pmd;
        pte_t *pte;
 
-       pgd = swapper_pg_dir + pgd_index(addr);
+       pgd = pgd_offset_k(addr);
        if (pgd_none(*pgd)) {
                pgd_ERROR(*pgd);
                return;
        }
 
-       pmd = pmd_offset(pgd, addr);
-       if (pmd_none(*pmd)) {
-               pte = (pte_t *)get_zeroed_page(GFP_ATOMIC);
-               set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE | _PAGE_USER));
-               if (pte != pte_offset_kernel(pmd, 0)) {
-                       pmd_ERROR(*pmd);
-                       return;
-               }
+       pud = pud_alloc(NULL, pgd, addr);
+       if (unlikely(!pud)) {
+               pud_ERROR(*pud);
+               return;
+       }
+
+       pmd = pmd_alloc(NULL, pud, addr);
+       if (unlikely(!pmd)) {
+               pmd_ERROR(*pmd);
+               return;
        }
 
        pte = pte_offset_kernel(pmd, addr);
@@ -136,6 +140,7 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
 
        set_pte_phys(address, phys, prot);
 }
+#endif /* CONFIG_MMU */
 
 /* References to section boundaries */
 
@@ -144,9 +149,6 @@ extern char __init_begin, __init_end;
 
 /*
  * paging_init() sets up the page tables
- *
- * This routines also unmaps the page at virtual kernel address 0, so
- * that we can trap those pesky NULL-reference errors in the kernel.
  */
 void __init paging_init(void)
 {
@@ -156,7 +158,6 @@ void __init paging_init(void)
         * Setup some defaults for the zone sizes.. these should be safe
         * regardless of distcontiguous memory or MMU settings.
         */
-       zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT;
        zones_size[ZONE_NORMAL] = __MEMORY_SIZE >> PAGE_SHIFT;
 #ifdef CONFIG_HIGHMEM
        zones_size[ZONE_HIGHMEM] = 0 >> PAGE_SHIFT;
@@ -168,33 +169,20 @@ void __init paging_init(void)
         * the zone sizes accordingly, in addition to turning it on.
         */
        {
-               unsigned long max_dma, low, start_pfn;
-               pgd_t *pg_dir;
-               int i;
-
-               /* We don't need kernel mapping as hardware support that. */
-               pg_dir = swapper_pg_dir;
-
-               for (i = 0; i < PTRS_PER_PGD; i++)
-                       pgd_val(pg_dir[i]) = 0;
+               /* We don't need to map the kernel through the TLB, as
+                * it is permanatly mapped using P1. So clear the
+                * entire pgd. */
+               memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
 
                /* Turn on the MMU */
                enable_mmu();
-
-               /* Fixup the zone sizes */
-               start_pfn = START_PFN;
-               max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-               low = MAX_LOW_PFN;
-
-               if (low < max_dma) {
-                       zones_size[ZONE_DMA] = low - start_pfn;
-                       zones_size[ZONE_NORMAL] = 0;
-               } else {
-                       zones_size[ZONE_DMA] = max_dma - start_pfn;
-                       zones_size[ZONE_NORMAL] = low - max_dma;
-               }
+               zones_size[ZONE_NORMAL] = MAX_LOW_PFN - START_PFN;
        }
 
+       /* Set an initial value for the MMU.TTB so we don't have to
+        * check for a null value. */
+       set_TTB(swapper_pg_dir);
+
 #elif defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
        /*
         * If we don't have CONFIG_MMU set and the processor in question
@@ -212,9 +200,10 @@ void __init paging_init(void)
        free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0);
 }
 
+static struct kcore_list kcore_mem, kcore_vmalloc;
+
 void __init mem_init(void)
 {
-       extern unsigned long empty_zero_page[1024];
        int codesize, reservedpages, datasize, initsize;
        int tmp;
        extern unsigned long memory_start;
@@ -237,8 +226,13 @@ void __init mem_init(void)
         * Setup wrappers for copy/clear_page(), these will get overridden
         * later in the boot process if a better method is available.
         */
+#ifdef CONFIG_MMU
        copy_page = copy_page_slow;
        clear_page = clear_page_slow;
+#else
+       copy_page = copy_page_nommu;
+       clear_page = clear_page_nommu;
+#endif
 
        /* this will put all low memory onto the freelists */
        totalram_pages += free_all_bootmem_node(NODE_DATA(0));
@@ -254,7 +248,12 @@ void __init mem_init(void)
        datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
        initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
-       printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
+       kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+       kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
+                  VMALLOC_END - VMALLOC_START);
+
+       printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
+              "%dk reserved, %dk data, %dk init)\n",
                (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
                max_mapnr << (PAGE_SHIFT-10),
                codesize >> 10,
@@ -263,6 +262,9 @@ void __init mem_init(void)
                initsize >> 10);
 
        p3_cache_init();
+
+       /* Initialize the vDSO */
+       vsyscall_init();
 }
 
 void free_initmem(void)