/ {
model = "MPC8540ADS";
- compatible = "MPC85xxADS";
+ compatible = "MPC8540ADS", "MPC85xxADS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
- #cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8540@0 {
device_type = "cpu";
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
- linux,phandle = <201>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
dfsrr;
};
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
- linux,phandle = <24520>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <40000>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <40000>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <1>;
device_type = "ethernet-phy";
};
- ethernet-phy@3 {
- linux,phandle = <2452003>;
- interrupt-parent = <40000>;
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
interrupts = <37 1>;
reg = <3>;
device_type = "ethernet-phy";
address = [ 00 E0 0C 00 73 00 ];
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 2 e 2 12 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452000>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
};
ethernet@25000 {
address = [ 00 E0 0C 00 73 01 ];
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452001>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
};
ethernet@26000 {
address = [ 00 E0 0C 00 73 02 ];
local-mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <19 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452003>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy3>;
};
serial@4500 {
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
serial@4600 {
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
pci@8000 {
- linux,phandle = <8000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x02 */
- 1000 0 0 1 40000 31 1
- 1000 0 0 2 40000 32 1
- 1000 0 0 3 40000 33 1
- 1000 0 0 4 40000 34 1
+ 1000 0 0 1 &mpic 31 1
+ 1000 0 0 2 &mpic 32 1
+ 1000 0 0 3 &mpic 33 1
+ 1000 0 0 4 &mpic 34 1
/* IDSEL 0x03 */
- 1800 0 0 1 40000 34 1
- 1800 0 0 2 40000 31 1
- 1800 0 0 3 40000 32 1
- 1800 0 0 4 40000 33 1
+ 1800 0 0 1 &mpic 34 1
+ 1800 0 0 2 &mpic 31 1
+ 1800 0 0 3 &mpic 32 1
+ 1800 0 0 4 &mpic 33 1
/* IDSEL 0x04 */
- 2000 0 0 1 40000 33 1
- 2000 0 0 2 40000 34 1
- 2000 0 0 3 40000 31 1
- 2000 0 0 4 40000 32 1
+ 2000 0 0 1 &mpic 33 1
+ 2000 0 0 2 &mpic 34 1
+ 2000 0 0 3 &mpic 31 1
+ 2000 0 0 4 &mpic 32 1
/* IDSEL 0x05 */
- 2800 0 0 1 40000 32 1
- 2800 0 0 2 40000 33 1
- 2800 0 0 3 40000 34 1
- 2800 0 0 4 40000 31 1
+ 2800 0 0 1 &mpic 32 1
+ 2800 0 0 2 &mpic 33 1
+ 2800 0 0 3 &mpic 34 1
+ 2800 0 0 4 &mpic 31 1
/* IDSEL 0x0c */
- 6000 0 0 1 40000 31 1
- 6000 0 0 2 40000 32 1
- 6000 0 0 3 40000 33 1
- 6000 0 0 4 40000 34 1
+ 6000 0 0 1 &mpic 31 1
+ 6000 0 0 2 &mpic 32 1
+ 6000 0 0 3 &mpic 33 1
+ 6000 0 0 4 &mpic 34 1
/* IDSEL 0x0d */
- 6800 0 0 1 40000 34 1
- 6800 0 0 2 40000 31 1
- 6800 0 0 3 40000 32 1
- 6800 0 0 4 40000 33 1
+ 6800 0 0 1 &mpic 34 1
+ 6800 0 0 2 &mpic 31 1
+ 6800 0 0 3 &mpic 32 1
+ 6800 0 0 4 &mpic 33 1
/* IDSEL 0x0e */
- 7000 0 0 1 40000 33 1
- 7000 0 0 2 40000 34 1
- 7000 0 0 3 40000 31 1
- 7000 0 0 4 40000 32 1
+ 7000 0 0 1 &mpic 33 1
+ 7000 0 0 2 &mpic 34 1
+ 7000 0 0 3 &mpic 31 1
+ 7000 0 0 4 &mpic 32 1
/* IDSEL 0x0f */
- 7800 0 0 1 40000 32 1
- 7800 0 0 2 40000 33 1
- 7800 0 0 3 40000 34 1
- 7800 0 0 4 40000 31 1
+ 7800 0 0 1 &mpic 32 1
+ 7800 0 0 2 &mpic 33 1
+ 7800 0 0 3 &mpic 34 1
+ 7800 0 0 4 &mpic 31 1
/* IDSEL 0x12 */
- 9000 0 0 1 40000 31 1
- 9000 0 0 2 40000 32 1
- 9000 0 0 3 40000 33 1
- 9000 0 0 4 40000 34 1
+ 9000 0 0 1 &mpic 31 1
+ 9000 0 0 2 &mpic 32 1
+ 9000 0 0 3 &mpic 33 1
+ 9000 0 0 4 &mpic 34 1
/* IDSEL 0x13 */
- 9800 0 0 1 40000 34 1
- 9800 0 0 2 40000 31 1
- 9800 0 0 3 40000 32 1
- 9800 0 0 4 40000 33 1
+ 9800 0 0 1 &mpic 34 1
+ 9800 0 0 2 &mpic 31 1
+ 9800 0 0 3 &mpic 32 1
+ 9800 0 0 4 &mpic 33 1
/* IDSEL 0x14 */
- a000 0 0 1 40000 33 1
- a000 0 0 2 40000 34 1
- a000 0 0 3 40000 31 1
- a000 0 0 4 40000 32 1
+ a000 0 0 1 &mpic 33 1
+ a000 0 0 2 &mpic 34 1
+ a000 0 0 3 &mpic 31 1
+ a000 0 0 4 &mpic 32 1
/* IDSEL 0x15 */
- a800 0 0 1 40000 32 1
- a800 0 0 2 40000 33 1
- a800 0 0 3 40000 34 1
- a800 0 0 4 40000 31 1>;
- interrupt-parent = <40000>;
+ a800 0 0 1 &mpic 32 1
+ a800 0 0 2 &mpic 33 1
+ a800 0 0 3 &mpic 34 1
+ a800 0 0 4 &mpic 31 1>;
+ interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
device_type = "pci";
};
- pic@40000 {
- linux,phandle = <40000>;
+ mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
projects / linux-drm-fsl-dcu.git / blobdiff