select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select FW_CFE
select HW_HAS_PCI
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
+ select EARLY_PRINTK_8250 if EARLY_PRINTK
help
Support for BCM47XX based boards
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_HAS_EARLY_PRINTK
select SWAP_IO_SPACE
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select MIPS_L1_CACHE_SHIFT_4
help
Support for BCM63XX based boards
select SYS_SUPPORTS_128HZ
select SYS_SUPPORTS_256HZ
select SYS_SUPPORTS_1024HZ
+ select MIPS_L1_CACHE_SHIFT_4
help
This enables support for DEC's MIPS based workstations. For details
see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
select CEVT_R4K
select CSRC_R4K
select CSRC_GIC
- select DMA_NONCOHERENT
+ select DMA_MAYBE_COHERENT
select GENERIC_ISA_DMA
select HAVE_PCSPKR_PLATFORM
select IRQ_CPU
select SYS_HAS_CPU_MIPS64_R2
select SYS_HAS_CPU_NEVADA
select SYS_HAS_CPU_RM7000
- select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select DMA_NONCOHERENT
select IRQ_CPU
select IRQ_GIC
+ select LIBFDT
select MIPS_MSC
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select MIPS_L1_CACHE_SHIFT_7
help
This are the SGI Indy, Challenge S and Indigo2, as well as certain
OEM variants like the Tandem CMN B006S. To compile a Linux kernel
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
+ select MIPS_L1_CACHE_SHIFT_7
help
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
workstations. To compile a Linux kernel that runs on these, say Y
select SWAP_IO_SPACE
select BOOT_RAW
select ARCH_REQUIRE_GPIOLIB
+ select MIPS_L1_CACHE_SHIFT_4
help
Support the Mikrotik(tm) RouterBoard 532 series,
based on the IDT RC32434 SoC.
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
+ select ARCH_SUPPORTS_MSI
select ZONE_DMA32 if 64BIT
select SYNC_R4K
select SYS_HAS_EARLY_PRINTK
config ARCH_DMA_ADDR_T_64BIT
def_bool (HIGHMEM && 64BIT_PHYS_ADDR) || 64BIT
+config DMA_MAYBE_COHERENT
+ select DMA_NONCOHERENT
+ bool
+
config DMA_COHERENT
bool
config BOOT_ELF32
bool
+config MIPS_L1_CACHE_SHIFT_4
+ bool
+
+config MIPS_L1_CACHE_SHIFT_5
+ bool
+
+config MIPS_L1_CACHE_SHIFT_6
+ bool
+
+config MIPS_L1_CACHE_SHIFT_7
+ bool
+
config MIPS_L1_CACHE_SHIFT
int
- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || SOC_RT288X
- default "6" if MIPS_CPU_SCACHE
- default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
+ default "4" if MIPS_L1_CACHE_SHIFT_4
+ default "5" if MIPS_L1_CACHE_SHIFT_5
+ default "6" if MIPS_L1_CACHE_SHIFT_6
+ default "7" if MIPS_L1_CACHE_SHIFT_7
default "5"
config HAVE_STD_PC_SERIAL_PORT
select LIBFDT
select USE_OF
select USB_EHCI_BIG_ENDIAN_MMIO
+ select SYS_HAS_DMA_OPS
+ select MIPS_L1_CACHE_SHIFT_7
help
The Cavium Octeon processor is a highly integrated chip containing
many ethernet hardware widgets for networking tasks. The processor
can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
Full details can be found at http://www.caviumnetworks.com.
-config CPU_BMIPS3300
- bool "BMIPS3300"
- depends on SYS_HAS_CPU_BMIPS3300
- select CPU_BMIPS
- help
- Broadcom BMIPS3300 processors.
-
-config CPU_BMIPS4350
- bool "BMIPS4350"
- depends on SYS_HAS_CPU_BMIPS4350
- select CPU_BMIPS
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_HOTPLUG_CPU
- help
- Broadcom BMIPS4350 ("VIPER") processors.
-
-config CPU_BMIPS4380
- bool "BMIPS4380"
- depends on SYS_HAS_CPU_BMIPS4380
- select CPU_BMIPS
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_HOTPLUG_CPU
- help
- Broadcom BMIPS4380 processors.
-
-config CPU_BMIPS5000
- bool "BMIPS5000"
- depends on SYS_HAS_CPU_BMIPS5000
- select CPU_BMIPS
+config CPU_BMIPS
+ bool "Broadcom BMIPS"
+ depends on SYS_HAS_CPU_BMIPS
+ select CPU_MIPS32
+ select CPU_BMIPS32_3300 if SYS_HAS_CPU_BMIPS32_3300
+ select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
+ select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
+ select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
- select MIPS_CPU_SCACHE
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_HOTPLUG_CPU
+ select CPU_HAS_PREFETCH
help
- Broadcom BMIPS5000 processors.
+ Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors.
config CPU_XLR
bool "Netlogic XLR SoC"
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
-config CPU_BMIPS
+config CPU_BMIPS32_3300
+ select SMP_UP if SMP
bool
- select CPU_MIPS32
- select CPU_SUPPORTS_32BIT_KERNEL
- select DMA_NONCOHERENT
- select IRQ_CPU
- select SWAP_IO_SPACE
- select WEAK_ORDERING
+
+config CPU_BMIPS4350
+ bool
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_HOTPLUG_CPU
+
+config CPU_BMIPS4380
+ bool
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_HOTPLUG_CPU
+
+config CPU_BMIPS5000
+ bool
+ select MIPS_CPU_SCACHE
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_HOTPLUG_CPU
config SYS_HAS_CPU_LOONGSON2E
bool
config SYS_HAS_CPU_CAVIUM_OCTEON
bool
-config SYS_HAS_CPU_BMIPS3300
+config SYS_HAS_CPU_BMIPS
bool
+config SYS_HAS_CPU_BMIPS32_3300
+ bool
+ select SYS_HAS_CPU_BMIPS
+
config SYS_HAS_CPU_BMIPS4350
bool
+ select SYS_HAS_CPU_BMIPS
config SYS_HAS_CPU_BMIPS4380
bool
+ select SYS_HAS_CPU_BMIPS
config SYS_HAS_CPU_BMIPS5000
bool
+ select SYS_HAS_CPU_BMIPS
config SYS_HAS_CPU_XLR
bool
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
- range 14 64 if HUGETLB_PAGE && PAGE_SIZE_64KB
- default "14" if HUGETLB_PAGE && PAGE_SIZE_64KB
- range 13 64 if HUGETLB_PAGE && PAGE_SIZE_32KB
- default "13" if HUGETLB_PAGE && PAGE_SIZE_32KB
- range 12 64 if HUGETLB_PAGE && PAGE_SIZE_16KB
- default "12" if HUGETLB_PAGE && PAGE_SIZE_16KB
+ range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
+ default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
+ range 13 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
+ default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
+ range 12 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
+ default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
range 11 64
default "11"
help
config MIPS_CPU_SCACHE
bool
select BOARD_SCACHE
+ select MIPS_L1_CACHE_SHIFT_6
config R5000_CPU_SCACHE
bool
prompt "MIPS MT options"
config MIPS_MT_DISABLED
- bool "Disable multithreading support."
+ bool "Disable multithreading support"
help
- Use this option if your workload can't take advantage of
- MIPS hardware multithreading support. On systems that don't have
- the option of an MT-enabled processor this option will be the only
- option in this menu.
+ Use this option if your platform does not support the MT ASE
+ which is hardware multithreading support. On systems without
+ an MT-enabled processor, this will be the only option that is
+ available in this menu.
config MIPS_MT_SMP
bool "Use 1 TC on each available VPE for SMP"
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
+ select SYNC_R4K
select MIPS_MT
select SMP
- select SYS_SUPPORTS_SCHED_SMT if SMP
- select SYS_SUPPORTS_SMP
select SMP_UP
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_SCHED_SMT
select MIPS_PERF_SHARED_TC_COUNTERS
help
- This is a kernel model which is known a VSMP but lately has been
- marketesed into SMVP.
- Virtual SMP uses the processor's VPEs to implement virtual
- processors. In currently available configuration of the 34K processor
- this allows for a dual processor. Both processors will share the same
- primary caches; each will obtain the half of the TLB for it's own
- exclusive use. For a layman this model can be described as similar to
- what Intel calls Hyperthreading.
-
- For further information see http://www.linux-mips.org/wiki/34K#VSMP
+ This is a kernel model which is known as SMVP. This is supported
+ on cores with the MT ASE and uses the available VPEs to implement
+ virtual processors which supports SMP. This is equivalent to the
+ Intel Hyperthreading feature. For further information go to
+ <http://www.imgtec.com/mips/mips-multithreading.asp>.
config MIPS_MT_SMTC
- bool "SMTC: Use all TCs on all VPEs for SMP"
+ bool "Use all TCs on all VPEs for SMP (DEPRECATED)"
depends on CPU_MIPS32_R2
- #depends on CPU_MIPS64_R2 # once there is hardware ...
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select MIPS_MT
- select NR_CPUS_DEFAULT_8
select SMP
- select SYS_SUPPORTS_SMP
select SMP_UP
+ select SYS_SUPPORTS_SMP
+ select NR_CPUS_DEFAULT_8
help
- This is a kernel model which is known a SMTC or lately has been
- marketesed into SMVP.
- is presenting the available TC's of the core as processors to Linux.
- On currently available 34K processors this means a Linux system will
- see up to 5 processors. The implementation of the SMTC kernel differs
- significantly from VSMP and cannot efficiently coexist in the same
- kernel binary so the choice between VSMP and SMTC is a compile time
- decision.
-
- For further information see http://www.linux-mips.org/wiki/34K#SMTC
+ This is a kernel model which is known as SMTC. This is
+ supported on cores with the MT ASE and presents all TCs
+ available on all VPEs to support SMP. For further
+ information see <http://www.linux-mips.org/wiki/34K#SMTC>.
endchoice
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
+config MIPS_VPE_LOADER_CMP
+ bool
+ default "y"
+ depends on MIPS_VPE_LOADER && MIPS_CMP
+
+config MIPS_VPE_LOADER_MT
+ bool
+ default "y"
+ depends on MIPS_VPE_LOADER && !MIPS_CMP
+
config MIPS_MT_SMTC_IM_BACKSTOP
bool "Use per-TC register bits as backstop for inhibited IM bits"
depends on MIPS_MT_SMTC
you to ensure the amount you put in the option and the space your
program requires is less or equal to the amount physically present.
-# this should possibly be in drivers/char, but it is rather cpu related. Hmmm
config MIPS_VPE_APSP_API
bool "Enable support for AP/SP API (RTLX)"
depends on MIPS_VPE_LOADER
help
+config MIPS_VPE_APSP_API_CMP
+ bool
+ default "y"
+ depends on MIPS_VPE_APSP_API && MIPS_CMP
+
+config MIPS_VPE_APSP_API_MT
+ bool
+ default "y"
+ depends on MIPS_VPE_APSP_API && !MIPS_CMP
+
config MIPS_CMP
- bool "MIPS CMP framework support"
- depends on SYS_SUPPORTS_MIPS_CMP
- select SMP
+ bool "MIPS CMP support"
+ depends on SYS_SUPPORTS_MIPS_CMP && MIPS_MT_SMP
select SYNC_R4K
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_SCHED_SMT if SMP
select WEAK_ORDERING
default n
help
- This is a placeholder option for the GCMP work. It will need to
- be handled differently...
+ Enable Coherency Manager processor (CMP) support.
config SB1_PASS_1_WORKAROUNDS
bool
If unsure, say Y. Only embedded should say N here.
+config MIPS_O32_FP64_SUPPORT
+ bool "Support for O32 binaries using 64-bit FP (EXPERIMENTAL)"
+ depends on 32BIT || MIPS32_O32
+ help
+ When this is enabled, the kernel will support use of 64-bit floating
+ point registers with binaries using the O32 ABI along with the
+ EF_MIPS_FP64 ELF header flag (typically built with -mfp64). On
+ 32-bit MIPS systems this support is at the cost of increasing the
+ size and complexity of the compiled FPU emulator. Thus if you are
+ running a MIPS32 system and know that none of your userland binaries
+ will require 64-bit floating point, you may wish to reduce the size
+ of your kernel & potentially improve FP emulation performance by
+ saying N here.
+
+ Although binutils currently supports use of this flag the details
+ concerning its effect upon the O32 ABI in userland are still being
+ worked on. In order to avoid userland becoming dependant upon current
+ behaviour before the details have been finalised, this option should
+ be considered experimental and only enabled by those working upon
+ said details.
+
+ If unsure, say N.
+
config USE_OF
bool
select OF
projects / linux-drm-fsl-dcu.git / blobdiff