#include <asm/uaccess.h>
#include <asm/processor.h>
#include <asm/timer.h>
+#include <asm/time.h>
#include "mach_time.h"
unsigned int cpu_khz; /* Detected as we calibrate the TSC */
EXPORT_SYMBOL(cpu_khz);
-extern unsigned long wall_jiffies;
-
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
/* gets recalled with irq locally disabled */
/* XXX - does irqsave resolve this? -johnstul */
spin_lock_irqsave(&rtc_lock, flags);
- if (efi_enabled)
- retval = efi_set_rtc_mmss(nowtime);
- else
- retval = mach_set_rtc_mmss(nowtime);
+ retval = set_wallclock(nowtime);
spin_unlock_irqrestore(&rtc_lock, flags);
return retval;
int timer_ack;
-#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER)
unsigned long profile_pc(struct pt_regs *regs)
{
unsigned long pc = instruction_pointer(regs);
- if (!user_mode_vm(regs) && in_lock_functions(pc))
+#ifdef CONFIG_SMP
+ if (!user_mode_vm(regs) && in_lock_functions(pc)) {
+#ifdef CONFIG_FRAME_POINTER
return *(unsigned long *)(regs->ebp + 4);
-
+#else
+ unsigned long *sp;
+ if ((regs->xcs & 3) == 0)
+ sp = (unsigned long *)®s->esp;
+ else
+ sp = (unsigned long *)regs->esp;
+ /* Return address is either directly at stack pointer
+ or above a saved eflags. Eflags has bits 22-31 zero,
+ kernel addresses don't. */
+ if (sp[0] >> 22)
+ return sp[0];
+ if (sp[1] >> 22)
+ return sp[1];
+#endif
+ }
+#endif
return pc;
}
EXPORT_SYMBOL(profile_pc);
-#endif
/*
* This is the same as the above, except we _also_ save the current
* Time Stamp Counter value at the time of the timer interrupt, so that
* we later on can estimate the time of day more exactly.
*/
-irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t timer_interrupt(int irq, void *dev_id)
{
/*
* Here we are in the timer irq handler. We just have irqs locally
}
#endif
- do_timer_interrupt_hook(regs);
+ do_timer_interrupt_hook();
if (MCA_bus) {
high bit of the PPI port B (0x61). Note that some PS/2s,
notably the 55SX, work fine if this is removed. */
- irq = inb_p( 0x61 ); /* read the current state */
- outb_p( irq|0x80, 0x61 ); /* reset the IRQ */
+ u8 irq_v = inb_p( 0x61 ); /* read the current state */
+ outb_p( irq_v|0x80, 0x61 ); /* reset the IRQ */
}
write_sequnlock(&xtime_lock);
#ifdef CONFIG_X86_LOCAL_APIC
if (using_apic_timer)
- smp_send_timer_broadcast_ipi(regs);
+ smp_send_timer_broadcast_ipi();
#endif
return IRQ_HANDLED;
spin_lock_irqsave(&rtc_lock, flags);
- if (efi_enabled)
- retval = efi_get_time();
- else
- retval = mach_get_cmos_time();
+ retval = get_wallclock();
spin_unlock_irqrestore(&rtc_lock, flags);
mod_timer(&sync_cmos_timer, jiffies + 1);
}
-static long clock_cmos_diff, sleep_start;
+static long clock_cmos_diff;
+static unsigned long sleep_start;
static int timer_suspend(struct sys_device *dev, pm_message_t state)
{
/*
* Estimate time zone so that set_time can update the clock
*/
- clock_cmos_diff = -get_cmos_time();
+ unsigned long ctime = get_cmos_time();
+
+ clock_cmos_diff = -ctime;
clock_cmos_diff += get_seconds();
- sleep_start = get_cmos_time();
+ sleep_start = ctime;
return 0;
}
{
unsigned long flags;
unsigned long sec;
- unsigned long sleep_length;
-
+ unsigned long ctime = get_cmos_time();
+ long sleep_length = (ctime - sleep_start) * HZ;
+ struct timespec ts;
+
+ if (sleep_length < 0) {
+ printk(KERN_WARNING "CMOS clock skew detected in timer resume!\n");
+ /* The time after the resume must not be earlier than the time
+ * before the suspend or some nasty things will happen
+ */
+ sleep_length = 0;
+ ctime = sleep_start;
+ }
#ifdef CONFIG_HPET_TIMER
if (is_hpet_enabled())
hpet_reenable();
#endif
setup_pit_timer();
- sec = get_cmos_time() + clock_cmos_diff;
- sleep_length = (get_cmos_time() - sleep_start) * HZ;
+
+ sec = ctime + clock_cmos_diff;
+ ts.tv_sec = sec;
+ ts.tv_nsec = 0;
+ do_settimeofday(&ts);
write_seqlock_irqsave(&xtime_lock, flags);
- xtime.tv_sec = sec;
- xtime.tv_nsec = 0;
jiffies_64 += sleep_length;
- wall_jiffies += sleep_length;
write_sequnlock_irqrestore(&xtime_lock, flags);
touch_softlockup_watchdog();
return 0;
/* Duplicate of time_init() below, with hpet_enable part added */
static void __init hpet_time_init(void)
{
- xtime.tv_sec = get_cmos_time();
- xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
+ struct timespec ts;
+ ts.tv_sec = get_cmos_time();
+ ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+
+ do_settimeofday(&ts);
if ((hpet_enable() >= 0) && hpet_use_timer) {
printk("Using HPET for base-timer\n");
}
- time_init_hook();
+ do_time_init();
}
#endif
void __init time_init(void)
{
+ struct timespec ts;
#ifdef CONFIG_HPET_TIMER
if (is_hpet_capable()) {
/*
return;
}
#endif
- xtime.tv_sec = get_cmos_time();
- xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
+ ts.tv_sec = get_cmos_time();
+ ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+
+ do_settimeofday(&ts);
- time_init_hook();
+ do_time_init();
}
projects / linux-drm-fsl-dcu.git / blobdiff