#include <setup_arch.h>
#include <bios_ebda.h>
-/* Forward Declaration. */
-void __init find_max_pfn(void);
-
/* This value is set up by the early boot code to point to the value
immediately after the boot time page tables. It contains a *physical*
address, and must not be in the .bss segment! */
/*
* Machine setup..
*/
-
-#ifdef CONFIG_EFI
-int efi_enabled = 0;
-EXPORT_SYMBOL(efi_enabled);
-#endif
+extern struct resource code_resource;
+extern struct resource data_resource;
/* cpu data as detected by the assembly code in head.S */
struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
unsigned int BIOS_revision;
unsigned int mca_pentium_flag;
-/* For PCI or other memory-mapped resources */
-unsigned long pci_mem_start = 0x10000000;
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(pci_mem_start);
-#endif
-
/* Boot loader ID as an integer, for the benefit of proc_dointvec */
int bootloader_type;
defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
EXPORT_SYMBOL(ist_info);
#endif
-struct e820map e820;
extern void early_cpu_init(void);
extern int root_mountflags;
unsigned char __initdata boot_params[PARAM_SIZE];
-static struct resource data_resource = {
- .name = "Kernel data",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource code_resource = {
- .name = "Kernel code",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource system_rom_resource = {
- .name = "System ROM",
- .start = 0xf0000,
- .end = 0xfffff,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource extension_rom_resource = {
- .name = "Extension ROM",
- .start = 0xe0000,
- .end = 0xeffff,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource adapter_rom_resources[] = { {
- .name = "Adapter ROM",
- .start = 0xc8000,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
- .name = "Adapter ROM",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
- .name = "Adapter ROM",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
- .name = "Adapter ROM",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
- .name = "Adapter ROM",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
- .name = "Adapter ROM",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-} };
-
-static struct resource video_rom_resource = {
- .name = "Video ROM",
- .start = 0xc0000,
- .end = 0xc7fff,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource video_ram_resource = {
- .name = "Video RAM area",
- .start = 0xa0000,
- .end = 0xbffff,
- .flags = IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
-static struct resource standard_io_resources[] = { {
- .name = "dma1",
- .start = 0x0000,
- .end = 0x001f,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO
-}, {
- .name = "pic1",
- .start = 0x0020,
- .end = 0x0021,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO
-}, {
- .name = "timer0",
- .start = 0x0040,
- .end = 0x0043,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO
-}, {
- .name = "timer1",
- .start = 0x0050,
- .end = 0x0053,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO
-}, {
- .name = "keyboard",
- .start = 0x0060,
- .end = 0x006f,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO
-}, {
- .name = "dma page reg",
- .start = 0x0080,
- .end = 0x008f,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO
-}, {
- .name = "pic2",
- .start = 0x00a0,
- .end = 0x00a1,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO
-}, {
- .name = "dma2",
- .start = 0x00c0,
- .end = 0x00df,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO
-}, {
- .name = "fpu",
- .start = 0x00f0,
- .end = 0x00ff,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO
-} };
-
-#define romsignature(x) (*(unsigned short *)(x) == 0xaa55)
-
-static int __init romchecksum(unsigned char *rom, unsigned long length)
-{
- unsigned char *p, sum = 0;
-
- for (p = rom; p < rom + length; p++)
- sum += *p;
- return sum == 0;
-}
-
-static void __init probe_roms(void)
-{
- unsigned long start, length, upper;
- unsigned char *rom;
- int i;
-
- /* video rom */
- upper = adapter_rom_resources[0].start;
- for (start = video_rom_resource.start; start < upper; start += 2048) {
- rom = isa_bus_to_virt(start);
- if (!romsignature(rom))
- continue;
-
- video_rom_resource.start = start;
-
- /* 0 < length <= 0x7f * 512, historically */
- length = rom[2] * 512;
-
- /* if checksum okay, trust length byte */
- if (length && romchecksum(rom, length))
- video_rom_resource.end = start + length - 1;
-
- request_resource(&iomem_resource, &video_rom_resource);
- break;
- }
-
- start = (video_rom_resource.end + 1 + 2047) & ~2047UL;
- if (start < upper)
- start = upper;
-
- /* system rom */
- request_resource(&iomem_resource, &system_rom_resource);
- upper = system_rom_resource.start;
-
- /* check for extension rom (ignore length byte!) */
- rom = isa_bus_to_virt(extension_rom_resource.start);
- if (romsignature(rom)) {
- length = extension_rom_resource.end - extension_rom_resource.start + 1;
- if (romchecksum(rom, length)) {
- request_resource(&iomem_resource, &extension_rom_resource);
- upper = extension_rom_resource.start;
- }
- }
-
- /* check for adapter roms on 2k boundaries */
- for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) {
- rom = isa_bus_to_virt(start);
- if (!romsignature(rom))
- continue;
-
- /* 0 < length <= 0x7f * 512, historically */
- length = rom[2] * 512;
-
- /* but accept any length that fits if checksum okay */
- if (!length || start + length > upper || !romchecksum(rom, length))
- continue;
-
- adapter_rom_resources[i].start = start;
- adapter_rom_resources[i].end = start + length - 1;
- request_resource(&iomem_resource, &adapter_rom_resources[i]);
-
- start = adapter_rom_resources[i++].end & ~2047UL;
- }
-}
-
-static void __init limit_regions(unsigned long long size)
-{
- unsigned long long current_addr = 0;
- int i;
-
- if (efi_enabled) {
- efi_memory_desc_t *md;
- void *p;
-
- for (p = memmap.map, i = 0; p < memmap.map_end;
- p += memmap.desc_size, i++) {
- md = p;
- current_addr = md->phys_addr + (md->num_pages << 12);
- if (md->type == EFI_CONVENTIONAL_MEMORY) {
- if (current_addr >= size) {
- md->num_pages -=
- (((current_addr-size) + PAGE_SIZE-1) >> PAGE_SHIFT);
- memmap.nr_map = i + 1;
- return;
- }
- }
- }
- }
- for (i = 0; i < e820.nr_map; i++) {
- current_addr = e820.map[i].addr + e820.map[i].size;
- if (current_addr < size)
- continue;
-
- if (e820.map[i].type != E820_RAM)
- continue;
-
- if (e820.map[i].addr >= size) {
- /*
- * This region starts past the end of the
- * requested size, skip it completely.
- */
- e820.nr_map = i;
- } else {
- e820.nr_map = i + 1;
- e820.map[i].size -= current_addr - size;
- }
- return;
- }
-}
-
-void __init add_memory_region(unsigned long long start,
- unsigned long long size, int type)
-{
- int x;
-
- if (!efi_enabled) {
- x = e820.nr_map;
-
- if (x == E820MAX) {
- printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
- return;
- }
-
- e820.map[x].addr = start;
- e820.map[x].size = size;
- e820.map[x].type = type;
- e820.nr_map++;
- }
-} /* add_memory_region */
-
-#define E820_DEBUG 1
-
-static void __init print_memory_map(char *who)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- printk(" %s: %016Lx - %016Lx ", who,
- e820.map[i].addr,
- e820.map[i].addr + e820.map[i].size);
- switch (e820.map[i].type) {
- case E820_RAM: printk("(usable)\n");
- break;
- case E820_RESERVED:
- printk("(reserved)\n");
- break;
- case E820_ACPI:
- printk("(ACPI data)\n");
- break;
- case E820_NVS:
- printk("(ACPI NVS)\n");
- break;
- default: printk("type %lu\n", e820.map[i].type);
- break;
- }
- }
-}
-
-/*
- * Sanitize the BIOS e820 map.
- *
- * Some e820 responses include overlapping entries. The following
- * replaces the original e820 map with a new one, removing overlaps.
- *
- */
-struct change_member {
- struct e820entry *pbios; /* pointer to original bios entry */
- unsigned long long addr; /* address for this change point */
-};
-static struct change_member change_point_list[2*E820MAX] __initdata;
-static struct change_member *change_point[2*E820MAX] __initdata;
-static struct e820entry *overlap_list[E820MAX] __initdata;
-static struct e820entry new_bios[E820MAX] __initdata;
-
-int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
-{
- struct change_member *change_tmp;
- unsigned long current_type, last_type;
- unsigned long long last_addr;
- int chgidx, still_changing;
- int overlap_entries;
- int new_bios_entry;
- int old_nr, new_nr, chg_nr;
- int i;
-
- /*
- Visually we're performing the following (1,2,3,4 = memory types)...
-
- Sample memory map (w/overlaps):
- ____22__________________
- ______________________4_
- ____1111________________
- _44_____________________
- 11111111________________
- ____________________33__
- ___________44___________
- __________33333_________
- ______________22________
- ___________________2222_
- _________111111111______
- _____________________11_
- _________________4______
-
- Sanitized equivalent (no overlap):
- 1_______________________
- _44_____________________
- ___1____________________
- ____22__________________
- ______11________________
- _________1______________
- __________3_____________
- ___________44___________
- _____________33_________
- _______________2________
- ________________1_______
- _________________4______
- ___________________2____
- ____________________33__
- ______________________4_
- */
-
- /* if there's only one memory region, don't bother */
- if (*pnr_map < 2)
- return -1;
-
- old_nr = *pnr_map;
-
- /* bail out if we find any unreasonable addresses in bios map */
- for (i=0; i<old_nr; i++)
- if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
- return -1;
-
- /* create pointers for initial change-point information (for sorting) */
- for (i=0; i < 2*old_nr; i++)
- change_point[i] = &change_point_list[i];
-
- /* record all known change-points (starting and ending addresses),
- omitting those that are for empty memory regions */
- chgidx = 0;
- for (i=0; i < old_nr; i++) {
- if (biosmap[i].size != 0) {
- change_point[chgidx]->addr = biosmap[i].addr;
- change_point[chgidx++]->pbios = &biosmap[i];
- change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
- change_point[chgidx++]->pbios = &biosmap[i];
- }
- }
- chg_nr = chgidx; /* true number of change-points */
-
- /* sort change-point list by memory addresses (low -> high) */
- still_changing = 1;
- while (still_changing) {
- still_changing = 0;
- for (i=1; i < chg_nr; i++) {
- /* if <current_addr> > <last_addr>, swap */
- /* or, if current=<start_addr> & last=<end_addr>, swap */
- if ((change_point[i]->addr < change_point[i-1]->addr) ||
- ((change_point[i]->addr == change_point[i-1]->addr) &&
- (change_point[i]->addr == change_point[i]->pbios->addr) &&
- (change_point[i-1]->addr != change_point[i-1]->pbios->addr))
- )
- {
- change_tmp = change_point[i];
- change_point[i] = change_point[i-1];
- change_point[i-1] = change_tmp;
- still_changing=1;
- }
- }
- }
-
- /* create a new bios memory map, removing overlaps */
- overlap_entries=0; /* number of entries in the overlap table */
- new_bios_entry=0; /* index for creating new bios map entries */
- last_type = 0; /* start with undefined memory type */
- last_addr = 0; /* start with 0 as last starting address */
- /* loop through change-points, determining affect on the new bios map */
- for (chgidx=0; chgidx < chg_nr; chgidx++)
- {
- /* keep track of all overlapping bios entries */
- if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
- {
- /* add map entry to overlap list (> 1 entry implies an overlap) */
- overlap_list[overlap_entries++]=change_point[chgidx]->pbios;
- }
- else
- {
- /* remove entry from list (order independent, so swap with last) */
- for (i=0; i<overlap_entries; i++)
- {
- if (overlap_list[i] == change_point[chgidx]->pbios)
- overlap_list[i] = overlap_list[overlap_entries-1];
- }
- overlap_entries--;
- }
- /* if there are overlapping entries, decide which "type" to use */
- /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
- current_type = 0;
- for (i=0; i<overlap_entries; i++)
- if (overlap_list[i]->type > current_type)
- current_type = overlap_list[i]->type;
- /* continue building up new bios map based on this information */
- if (current_type != last_type) {
- if (last_type != 0) {
- new_bios[new_bios_entry].size =
- change_point[chgidx]->addr - last_addr;
- /* move forward only if the new size was non-zero */
- if (new_bios[new_bios_entry].size != 0)
- if (++new_bios_entry >= E820MAX)
- break; /* no more space left for new bios entries */
- }
- if (current_type != 0) {
- new_bios[new_bios_entry].addr = change_point[chgidx]->addr;
- new_bios[new_bios_entry].type = current_type;
- last_addr=change_point[chgidx]->addr;
- }
- last_type = current_type;
- }
- }
- new_nr = new_bios_entry; /* retain count for new bios entries */
-
- /* copy new bios mapping into original location */
- memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry));
- *pnr_map = new_nr;
-
- return 0;
-}
-
-/*
- * Copy the BIOS e820 map into a safe place.
- *
- * Sanity-check it while we're at it..
- *
- * If we're lucky and live on a modern system, the setup code
- * will have given us a memory map that we can use to properly
- * set up memory. If we aren't, we'll fake a memory map.
- *
- * We check to see that the memory map contains at least 2 elements
- * before we'll use it, because the detection code in setup.S may
- * not be perfect and most every PC known to man has two memory
- * regions: one from 0 to 640k, and one from 1mb up. (The IBM
- * thinkpad 560x, for example, does not cooperate with the memory
- * detection code.)
- */
-int __init copy_e820_map(struct e820entry * biosmap, int nr_map)
-{
- /* Only one memory region (or negative)? Ignore it */
- if (nr_map < 2)
- return -1;
-
- do {
- unsigned long long start = biosmap->addr;
- unsigned long long size = biosmap->size;
- unsigned long long end = start + size;
- unsigned long type = biosmap->type;
-
- /* Overflow in 64 bits? Ignore the memory map. */
- if (start > end)
- return -1;
-
- /*
- * Some BIOSes claim RAM in the 640k - 1M region.
- * Not right. Fix it up.
- */
- if (type == E820_RAM) {
- if (start < 0x100000ULL && end > 0xA0000ULL) {
- if (start < 0xA0000ULL)
- add_memory_region(start, 0xA0000ULL-start, type);
- if (end <= 0x100000ULL)
- continue;
- start = 0x100000ULL;
- size = end - start;
- }
- }
- add_memory_region(start, size, type);
- } while (biosmap++,--nr_map);
- return 0;
-}
-
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
struct edd edd;
#ifdef CONFIG_EDD_MODULE
}
#endif
-static int __initdata user_defined_memmap = 0;
+int __initdata user_defined_memmap = 0;
/*
* "mem=nopentium" disables the 4MB page tables.
}
early_param("mem", parse_mem);
-static int __init parse_memmap(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- if (strcmp(arg, "exactmap") == 0) {
-#ifdef CONFIG_CRASH_DUMP
- /* If we are doing a crash dump, we
- * still need to know the real mem
- * size before original memory map is
- * reset.
- */
- find_max_pfn();
- saved_max_pfn = max_pfn;
-#endif
- e820.nr_map = 0;
- user_defined_memmap = 1;
- } else {
- /* If the user specifies memory size, we
- * limit the BIOS-provided memory map to
- * that size. exactmap can be used to specify
- * the exact map. mem=number can be used to
- * trim the existing memory map.
- */
- unsigned long long start_at, mem_size;
-
- mem_size = memparse(arg, &arg);
- if (*arg == '@') {
- start_at = memparse(arg+1, &arg);
- add_memory_region(start_at, mem_size, E820_RAM);
- } else if (*arg == '#') {
- start_at = memparse(arg+1, &arg);
- add_memory_region(start_at, mem_size, E820_ACPI);
- } else if (*arg == '$') {
- start_at = memparse(arg+1, &arg);
- add_memory_region(start_at, mem_size, E820_RESERVED);
- } else {
- limit_regions(mem_size);
- user_defined_memmap = 1;
- }
- }
- return 0;
-}
-early_param("memmap", parse_memmap);
-
#ifdef CONFIG_PROC_VMCORE
/* elfcorehdr= specifies the location of elf core header
* stored by the crashed kernel.
}
early_param("reservetop", parse_reservetop);
-/*
- * Callback for efi_memory_walk.
- */
-static int __init
-efi_find_max_pfn(unsigned long start, unsigned long end, void *arg)
-{
- unsigned long *max_pfn = arg, pfn;
-
- if (start < end) {
- pfn = PFN_UP(end -1);
- if (pfn > *max_pfn)
- *max_pfn = pfn;
- }
- return 0;
-}
-
-static int __init
-efi_memory_present_wrapper(unsigned long start, unsigned long end, void *arg)
-{
- memory_present(0, start, end);
- return 0;
-}
-
- /*
- * This function checks if the entire range <start,end> is mapped with type.
- *
- * Note: this function only works correct if the e820 table is sorted and
- * not-overlapping, which is the case
- */
-int __init
-e820_all_mapped(unsigned long s, unsigned long e, unsigned type)
-{
- u64 start = s;
- u64 end = e;
- int i;
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- if (type && ei->type != type)
- continue;
- /* is the region (part) in overlap with the current region ?*/
- if (ei->addr >= end || ei->addr + ei->size <= start)
- continue;
- /* if the region is at the beginning of <start,end> we move
- * start to the end of the region since it's ok until there
- */
- if (ei->addr <= start)
- start = ei->addr + ei->size;
- /* if start is now at or beyond end, we're done, full
- * coverage */
- if (start >= end)
- return 1; /* we're done */
- }
- return 0;
-}
-
-/*
- * Find the highest page frame number we have available
- */
-void __init find_max_pfn(void)
-{
- int i;
-
- max_pfn = 0;
- if (efi_enabled) {
- efi_memmap_walk(efi_find_max_pfn, &max_pfn);
- efi_memmap_walk(efi_memory_present_wrapper, NULL);
- return;
- }
-
- for (i = 0; i < e820.nr_map; i++) {
- unsigned long start, end;
- /* RAM? */
- if (e820.map[i].type != E820_RAM)
- continue;
- start = PFN_UP(e820.map[i].addr);
- end = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
- if (start >= end)
- continue;
- if (end > max_pfn)
- max_pfn = end;
- memory_present(0, start, end);
- }
-}
-
/*
* Determine low and high memory ranges:
*/
return max_low_pfn;
}
-/*
- * Free all available memory for boot time allocation. Used
- * as a callback function by efi_memory_walk()
- */
-
-static int __init
-free_available_memory(unsigned long start, unsigned long end, void *arg)
-{
- /* check max_low_pfn */
- if (start >= (max_low_pfn << PAGE_SHIFT))
- return 0;
- if (end >= (max_low_pfn << PAGE_SHIFT))
- end = max_low_pfn << PAGE_SHIFT;
- if (start < end)
- free_bootmem(start, end - start);
-
- return 0;
-}
-/*
- * Register fully available low RAM pages with the bootmem allocator.
- */
-static void __init register_bootmem_low_pages(unsigned long max_low_pfn)
-{
- int i;
-
- if (efi_enabled) {
- efi_memmap_walk(free_available_memory, NULL);
- return;
- }
- for (i = 0; i < e820.nr_map; i++) {
- unsigned long curr_pfn, last_pfn, size;
- /*
- * Reserve usable low memory
- */
- if (e820.map[i].type != E820_RAM)
- continue;
- /*
- * We are rounding up the start address of usable memory:
- */
- curr_pfn = PFN_UP(e820.map[i].addr);
- if (curr_pfn >= max_low_pfn)
- continue;
- /*
- * ... and at the end of the usable range downwards:
- */
- last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
-
- if (last_pfn > max_low_pfn)
- last_pfn = max_low_pfn;
-
- /*
- * .. finally, did all the rounding and playing
- * around just make the area go away?
- */
- if (last_pfn <= curr_pfn)
- continue;
-
- size = last_pfn - curr_pfn;
- free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
- }
-}
-
/*
* workaround for Dell systems that neglect to reserve EBDA
*/
void __init zone_sizes_init(void)
{
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ max_zone_pfns[ZONE_DMA] =
+ virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_HIGHMEM
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {
- virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
- max_low_pfn,
- highend_pfn};
+ max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
add_active_range(0, 0, highend_pfn);
#else
- unsigned long max_zone_pfns[MAX_NR_ZONES] = {
- virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
- max_low_pfn};
add_active_range(0, 0, max_low_pfn);
#endif
* the (very unlikely) case of us accidentally initializing the
* bootmem allocator with an invalid RAM area.
*/
- reserve_bootmem(__PHYSICAL_START, (PFN_PHYS(min_low_pfn) +
- bootmap_size + PAGE_SIZE-1) - (__PHYSICAL_START));
+ reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) +
+ bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text));
/*
* reserve physical page 0 - it's a special BIOS page on many boxes,
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
reserve_bootmem(INITRD_START, INITRD_SIZE);
- initrd_start =
- INITRD_START ? INITRD_START + PAGE_OFFSET : 0;
+ initrd_start = INITRD_START + PAGE_OFFSET;
initrd_end = initrd_start+INITRD_SIZE;
}
else {
}
}
-/*
- * Request address space for all standard RAM and ROM resources
- * and also for regions reported as reserved by the e820.
- */
-static void __init
-legacy_init_iomem_resources(struct resource *code_resource, struct resource *data_resource)
-{
- int i;
-
- probe_roms();
- for (i = 0; i < e820.nr_map; i++) {
- struct resource *res;
-#ifndef CONFIG_RESOURCES_64BIT
- if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL)
- continue;
-#endif
- res = kzalloc(sizeof(struct resource), GFP_ATOMIC);
- switch (e820.map[i].type) {
- case E820_RAM: res->name = "System RAM"; break;
- case E820_ACPI: res->name = "ACPI Tables"; break;
- case E820_NVS: res->name = "ACPI Non-volatile Storage"; break;
- default: res->name = "reserved";
- }
- res->start = e820.map[i].addr;
- res->end = res->start + e820.map[i].size - 1;
- res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
- if (request_resource(&iomem_resource, res)) {
- kfree(res);
- continue;
- }
- if (e820.map[i].type == E820_RAM) {
- /*
- * We don't know which RAM region contains kernel data,
- * so we try it repeatedly and let the resource manager
- * test it.
- */
- request_resource(res, code_resource);
- request_resource(res, data_resource);
-#ifdef CONFIG_KEXEC
- request_resource(res, &crashk_res);
-#endif
- }
- }
-}
-
-/*
- * Request address space for all standard resources
- *
- * This is called just before pcibios_init(), which is also a
- * subsys_initcall, but is linked in later (in arch/i386/pci/common.c).
- */
-static int __init request_standard_resources(void)
-{
- int i;
-
- printk("Setting up standard PCI resources\n");
- if (efi_enabled)
- efi_initialize_iomem_resources(&code_resource, &data_resource);
- else
- legacy_init_iomem_resources(&code_resource, &data_resource);
-
- /* EFI systems may still have VGA */
- request_resource(&iomem_resource, &video_ram_resource);
-
- /* request I/O space for devices used on all i[345]86 PCs */
- for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
- request_resource(&ioport_resource, &standard_io_resources[i]);
- return 0;
-}
-
-subsys_initcall(request_standard_resources);
-
-static void __init register_memory(void)
-{
- unsigned long gapstart, gapsize, round;
- unsigned long long last;
- int i;
-
- /*
- * Search for the bigest gap in the low 32 bits of the e820
- * memory space.
- */
- last = 0x100000000ull;
- gapstart = 0x10000000;
- gapsize = 0x400000;
- i = e820.nr_map;
- while (--i >= 0) {
- unsigned long long start = e820.map[i].addr;
- unsigned long long end = start + e820.map[i].size;
-
- /*
- * Since "last" is at most 4GB, we know we'll
- * fit in 32 bits if this condition is true
- */
- if (last > end) {
- unsigned long gap = last - end;
-
- if (gap > gapsize) {
- gapsize = gap;
- gapstart = end;
- }
- }
- if (start < last)
- last = start;
- }
-
- /*
- * See how much we want to round up: start off with
- * rounding to the next 1MB area.
- */
- round = 0x100000;
- while ((gapsize >> 4) > round)
- round += round;
- /* Fun with two's complement */
- pci_mem_start = (gapstart + round) & -round;
-
- printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n",
- pci_mem_start, gapstart, gapsize);
-}
-
#ifdef CONFIG_MCA
static void set_mca_bus(int x)
{
static void set_mca_bus(int x) { }
#endif
+/* Overridden in paravirt.c if CONFIG_PARAVIRT */
+char * __attribute__((weak)) memory_setup(void)
+{
+ return machine_specific_memory_setup();
+}
+
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
efi_init();
else {
printk(KERN_INFO "BIOS-provided physical RAM map:\n");
- print_memory_map(machine_specific_memory_setup());
+ print_memory_map(memory_setup());
}
copy_edd();
projects / linux-drm-fsl-dcu.git / blobdiff