#include <linux/module.h>
#include <linux/sysdev.h>
#include <linux/pci.h>
+#include <linux/msi.h>
+#include <linux/htirq.h>
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/i8259.h>
#include <asm/nmi.h>
#include <asm/msidef.h>
+#include <asm/hypertransport.h>
#include <mach_apic.h>
#include <mach_apicdef.h>
int apic, pin, next;
} irq_2_pin[PIN_MAP_SIZE];
+struct io_apic {
+ unsigned int index;
+ unsigned int unused[3];
+ unsigned int data;
+};
+
+static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
+{
+ return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
+ + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+}
+
+static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(reg, &io_apic->index);
+ return readl(&io_apic->data);
+}
+
+static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(reg, &io_apic->index);
+ writel(value, &io_apic->data);
+}
+
+/*
+ * Re-write a value: to be used for read-modify-write
+ * cycles where the read already set up the index register.
+ *
+ * Older SiS APIC requires we rewrite the index register
+ */
+static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
+{
+ volatile struct io_apic *io_apic = io_apic_base(apic);
+ if (sis_apic_bug)
+ writel(reg, &io_apic->index);
+ writel(value, &io_apic->data);
+}
+
union entry_union {
struct { u32 w1, w2; };
struct IO_APIC_route_entry entry;
return eu.entry;
}
+/*
+ * When we write a new IO APIC routing entry, we need to write the high
+ * word first! If the mask bit in the low word is clear, we will enable
+ * the interrupt, and we need to make sure the entry is fully populated
+ * before that happens.
+ */
static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
{
unsigned long flags;
union entry_union eu;
eu.entry = e;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(apic, 0x11 + 2*pin, eu.w2);
+ io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+/*
+ * When we mask an IO APIC routing entry, we need to write the low
+ * word first, in order to set the mask bit before we change the
+ * high bits!
+ */
+static void ioapic_mask_entry(int apic, int pin)
+{
+ unsigned long flags;
+ union entry_union eu = { .entry.mask = 1 };
+
spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(apic, 0x10 + 2*pin, eu.w1);
io_apic_write(apic, 0x11 + 2*pin, eu.w2);
/*
* Disable it in the IO-APIC irq-routing table:
*/
- memset(&entry, 0, sizeof(entry));
- entry.mask = 1;
- ioapic_write_entry(apic, pin, entry);
+ ioapic_mask_entry(apic, pin);
}
static void clear_IO_APIC (void)
BUG_ON((unsigned)irq >= NR_IRQ_VECTORS);
- if (IO_APIC_VECTOR(irq) > 0)
- return IO_APIC_VECTOR(irq);
+ if (irq_vector[irq] > 0)
+ return irq_vector[irq];
current_vector += 8;
if (current_vector == SYSCALL_VECTOR)
}
vector = current_vector;
- IO_APIC_VECTOR(irq) = vector;
+ irq_vector[irq] = vector;
return vector;
}
{
if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
trigger == IOAPIC_LEVEL)
- set_irq_chip_and_handler(irq, &ioapic_chip,
- handle_fasteoi_irq);
- else
- set_irq_chip_and_handler(irq, &ioapic_chip,
- handle_edge_irq);
+ set_irq_chip_and_handler_name(irq, &ioapic_chip,
+ handle_fasteoi_irq, "fasteoi");
+ else {
+ irq_desc[irq].status |= IRQ_DELAYED_DISABLE;
+ set_irq_chip_and_handler_name(irq, &ioapic_chip,
+ handle_edge_irq, "edge");
+ }
set_intr_gate(vector, interrupt[irq]);
}
* operation to prevent an edge-triggered interrupt escaping meanwhile.
* The idea is from Manfred Spraul. --macro
*/
- i = IO_APIC_VECTOR(irq);
+ i = irq_vector[irq];
v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
static int ioapic_retrigger_irq(unsigned int irq)
{
- send_IPI_self(IO_APIC_VECTOR(irq));
+ send_IPI_self(irq_vector[irq]);
return 1;
}
*/
for (irq = 0; irq < NR_IRQS ; irq++) {
int tmp = irq;
- if (IO_APIC_IRQ(tmp) && !IO_APIC_VECTOR(tmp)) {
+ if (IO_APIC_IRQ(tmp) && !irq_vector[tmp]) {
/*
* Hmm.. We don't have an entry for this,
* so default to an old-fashioned 8259
printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
disable_8259A_irq(0);
- set_irq_chip_and_handler(0, &lapic_chip, handle_fasteoi_irq);
+ set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq,
+ "fasteio");
apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
enable_8259A_irq(0);
device_initcall(ioapic_init_sysfs);
-#ifdef CONFIG_PCI_MSI
/*
- * Dynamic irq allocate and deallocation for MSI
+ * Dynamic irq allocate and deallocation
*/
int create_irq(void)
{
irq_vector[irq] = 0;
spin_unlock_irqrestore(&vector_lock, flags);
}
-#endif /* CONFIG_PCI_MSI */
/*
* MSI mesage composition
*/
#ifdef CONFIG_PCI_MSI
-static int msi_msg_setup(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
+static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
{
- /* For now always this code always uses physical delivery
- * mode.
- */
int vector;
unsigned dest;
return vector;
}
-static void msi_msg_teardown(unsigned int irq)
+#ifdef CONFIG_SMP
+static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+ struct msi_msg msg;
+ unsigned int dest;
+ cpumask_t tmp;
+ int vector;
+
+ cpus_and(tmp, mask, cpu_online_map);
+ if (cpus_empty(tmp))
+ tmp = TARGET_CPUS;
+
+ vector = assign_irq_vector(irq);
+ if (vector < 0)
+ return;
+
+ dest = cpu_mask_to_apicid(mask);
+
+ read_msi_msg(irq, &msg);
+
+ msg.data &= ~MSI_DATA_VECTOR_MASK;
+ msg.data |= MSI_DATA_VECTOR(vector);
+ msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
+ msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+
+ write_msi_msg(irq, &msg);
+ set_native_irq_info(irq, mask);
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
+ * which implement the MSI or MSI-X Capability Structure.
+ */
+static struct irq_chip msi_chip = {
+ .name = "PCI-MSI",
+ .unmask = unmask_msi_irq,
+ .mask = mask_msi_irq,
+ .ack = ack_ioapic_irq,
+#ifdef CONFIG_SMP
+ .set_affinity = set_msi_irq_affinity,
+#endif
+ .retrigger = ioapic_retrigger_irq,
+};
+
+int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev)
+{
+ struct msi_msg msg;
+ int ret;
+ ret = msi_compose_msg(dev, irq, &msg);
+ if (ret < 0)
+ return ret;
+
+ write_msi_msg(irq, &msg);
+
+ set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq,
+ "edge");
+
+ return 0;
+}
+
+void arch_teardown_msi_irq(unsigned int irq)
{
return;
}
-static void msi_msg_set_affinity(unsigned int irq, cpumask_t mask, struct msi_msg *msg)
+#endif /* CONFIG_PCI_MSI */
+
+/*
+ * Hypertransport interrupt support
+ */
+#ifdef CONFIG_HT_IRQ
+
+#ifdef CONFIG_SMP
+
+static void target_ht_irq(unsigned int irq, unsigned int dest)
{
- int vector;
- unsigned dest;
+ struct ht_irq_msg msg;
+ fetch_ht_irq_msg(irq, &msg);
- vector = assign_irq_vector(irq);
- if (vector > 0) {
- dest = cpu_mask_to_apicid(mask);
+ msg.address_lo &= ~(HT_IRQ_LOW_DEST_ID_MASK);
+ msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
- msg->data &= ~MSI_DATA_VECTOR_MASK;
- msg->data |= MSI_DATA_VECTOR(vector);
- msg->address_lo &= ~MSI_ADDR_DEST_ID_MASK;
- msg->address_lo |= MSI_ADDR_DEST_ID(dest);
- }
+ msg.address_lo |= HT_IRQ_LOW_DEST_ID(dest);
+ msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
+
+ write_ht_irq_msg(irq, &msg);
+}
+
+static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+ unsigned int dest;
+ cpumask_t tmp;
+
+ cpus_and(tmp, mask, cpu_online_map);
+ if (cpus_empty(tmp))
+ tmp = TARGET_CPUS;
+
+ cpus_and(mask, tmp, CPU_MASK_ALL);
+
+ dest = cpu_mask_to_apicid(mask);
+
+ target_ht_irq(irq, dest);
+ set_native_irq_info(irq, mask);
}
+#endif
-struct msi_ops arch_msi_ops = {
- .needs_64bit_address = 0,
- .setup = msi_msg_setup,
- .teardown = msi_msg_teardown,
- .target = msi_msg_set_affinity,
+static struct irq_chip ht_irq_chip = {
+ .name = "PCI-HT",
+ .mask = mask_ht_irq,
+ .unmask = unmask_ht_irq,
+ .ack = ack_ioapic_irq,
+#ifdef CONFIG_SMP
+ .set_affinity = set_ht_irq_affinity,
+#endif
+ .retrigger = ioapic_retrigger_irq,
};
-#endif /* CONFIG_PCI_MSI */
+int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
+{
+ int vector;
+
+ vector = assign_irq_vector(irq);
+ if (vector >= 0) {
+ struct ht_irq_msg msg;
+ unsigned dest;
+ cpumask_t tmp;
+
+ cpus_clear(tmp);
+ cpu_set(vector >> 8, tmp);
+ dest = cpu_mask_to_apicid(tmp);
+
+ msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
+
+ msg.address_lo =
+ HT_IRQ_LOW_BASE |
+ HT_IRQ_LOW_DEST_ID(dest) |
+ HT_IRQ_LOW_VECTOR(vector) |
+ ((INT_DEST_MODE == 0) ?
+ HT_IRQ_LOW_DM_PHYSICAL :
+ HT_IRQ_LOW_DM_LOGICAL) |
+ HT_IRQ_LOW_RQEOI_EDGE |
+ ((INT_DELIVERY_MODE != dest_LowestPrio) ?
+ HT_IRQ_LOW_MT_FIXED :
+ HT_IRQ_LOW_MT_ARBITRATED) |
+ HT_IRQ_LOW_IRQ_MASKED;
+
+ write_ht_irq_msg(irq, &msg);
+
+ set_irq_chip_and_handler_name(irq, &ht_irq_chip,
+ handle_edge_irq, "edge");
+ }
+ return vector;
+}
+#endif /* CONFIG_HT_IRQ */
/* --------------------------------------------------------------------------
ACPI-based IOAPIC Configuration