#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/usb/musb.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_data/pinctrl-adi2.h>
#include <asm/bfin5xx_spi.h>
#include <asm/dma.h>
#include <asm/gpio.h>
.end = UART0_RBR+2,
.flags = IORESOURCE_MEM,
},
+#ifdef CONFIG_EARLY_PRINTK
+ {
+ .start = PORTE_FER,
+ .end = PORTE_FER+2,
+ .flags = IORESOURCE_REG,
+ },
+#endif
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.end = UART1_RBR+2,
.flags = IORESOURCE_MEM,
},
+#ifdef CONFIG_EARLY_PRINTK
+ {
+ .start = PORTH_FER,
+ .end = PORTH_FER+2,
+ .flags = IORESOURCE_REG,
+ },
+#endif
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.end = UART2_RBR+2,
.flags = IORESOURCE_MEM,
},
+#ifdef CONFIG_EARLY_PRINTK
+ {
+ .start = PORTB_FER,
+ .end = PORTB_FER+2,
+ .flags = IORESOURCE_REG,
+ },
+#endif
{
.start = IRQ_UART2_TX,
.end = IRQ_UART2_TX,
.end = UART3_RBR+2,
.flags = IORESOURCE_MEM,
},
+#ifdef CONFIG_EARLY_PRINTK
+ {
+ .start = PORTB_FER,
+ .end = PORTB_FER+2,
+ .flags = IORESOURCE_REG,
+ },
+#endif
{
.start = IRQ_UART3_TX,
.end = IRQ_UART3_TX,
};
#endif
+#ifdef CONFIG_PINCTRL_ADI2
+
+# define ADI_PINT_DEVNAME "adi-gpio-pint"
+# define ADI_GPIO_DEVNAME "adi-gpio"
+# define ADI_PINCTRL_DEVNAME "pinctrl-adi2"
+
+static struct platform_device bfin_pinctrl_device = {
+ .name = ADI_PINCTRL_DEVNAME,
+ .id = 0,
+};
+
+static struct resource bfin_pint0_resources[] = {
+ {
+ .start = PINT0_MASK_SET,
+ .end = PINT0_LATCH + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PINT0,
+ .end = IRQ_PINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pint0_device = {
+ .name = ADI_PINT_DEVNAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_pint0_resources),
+ .resource = bfin_pint0_resources,
+};
+
+static struct resource bfin_pint1_resources[] = {
+ {
+ .start = PINT1_MASK_SET,
+ .end = PINT1_LATCH + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PINT1,
+ .end = IRQ_PINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pint1_device = {
+ .name = ADI_PINT_DEVNAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_pint1_resources),
+ .resource = bfin_pint1_resources,
+};
+
+static struct resource bfin_pint2_resources[] = {
+ {
+ .start = PINT2_MASK_SET,
+ .end = PINT2_LATCH + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PINT2,
+ .end = IRQ_PINT2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pint2_device = {
+ .name = ADI_PINT_DEVNAME,
+ .id = 2,
+ .num_resources = ARRAY_SIZE(bfin_pint2_resources),
+ .resource = bfin_pint2_resources,
+};
+
+static struct resource bfin_pint3_resources[] = {
+ {
+ .start = PINT3_MASK_SET,
+ .end = PINT3_LATCH + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PINT3,
+ .end = IRQ_PINT3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pint3_device = {
+ .name = ADI_PINT_DEVNAME,
+ .id = 3,
+ .num_resources = ARRAY_SIZE(bfin_pint3_resources),
+ .resource = bfin_pint3_resources,
+};
+
+static struct resource bfin_gpa_resources[] = {
+ {
+ .start = PORTA_FER,
+ .end = PORTA_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ { /* optional */
+ .start = IRQ_PA0,
+ .end = IRQ_PA0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpa_pdata = {
+ .port_gpio_base = GPIO_PA0, /* Optional */
+ .port_pin_base = GPIO_PA0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = 0, /* PINT0 */
+ .pint_assign = true, /* PINT upper 16 bit */
+ .pint_map = 0, /* mapping mask in PINT */
+};
+
+static struct platform_device bfin_gpa_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_gpa_resources),
+ .resource = bfin_gpa_resources,
+ .dev = {
+ .platform_data = &bfin_gpa_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpb_resources[] = {
+ {
+ .start = PORTB_FER,
+ .end = PORTB_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PB0,
+ .end = IRQ_PB0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpb_pdata = {
+ .port_gpio_base = GPIO_PB0,
+ .port_pin_base = GPIO_PB0,
+ .port_width = 15,
+ .pint_id = 0,
+ .pint_assign = true,
+ .pint_map = 1,
+};
+
+static struct platform_device bfin_gpb_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_gpb_resources),
+ .resource = bfin_gpb_resources,
+ .dev = {
+ .platform_data = &bfin_gpb_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpc_resources[] = {
+ {
+ .start = PORTC_FER,
+ .end = PORTC_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PC0,
+ .end = IRQ_PC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpc_pdata = {
+ .port_gpio_base = GPIO_PC0,
+ .port_pin_base = GPIO_PC0,
+ .port_width = 14,
+ .pint_id = 2,
+ .pint_assign = true,
+ .pint_map = 0,
+};
+
+static struct platform_device bfin_gpc_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 2,
+ .num_resources = ARRAY_SIZE(bfin_gpc_resources),
+ .resource = bfin_gpc_resources,
+ .dev = {
+ .platform_data = &bfin_gpc_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpd_resources[] = {
+ {
+ .start = PORTD_FER,
+ .end = PORTD_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PD0,
+ .end = IRQ_PD0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpd_pdata = {
+ .port_gpio_base = GPIO_PD0,
+ .port_pin_base = GPIO_PD0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = 2,
+ .pint_assign = false,
+ .pint_map = 1,
+};
+
+static struct platform_device bfin_gpd_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 3,
+ .num_resources = ARRAY_SIZE(bfin_gpd_resources),
+ .resource = bfin_gpd_resources,
+ .dev = {
+ .platform_data = &bfin_gpd_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpe_resources[] = {
+ {
+ .start = PORTE_FER,
+ .end = PORTE_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PE0,
+ .end = IRQ_PE0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpe_pdata = {
+ .port_gpio_base = GPIO_PE0,
+ .port_pin_base = GPIO_PE0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = 3,
+ .pint_assign = true,
+ .pint_map = 2,
+};
+
+static struct platform_device bfin_gpe_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 4,
+ .num_resources = ARRAY_SIZE(bfin_gpe_resources),
+ .resource = bfin_gpe_resources,
+ .dev = {
+ .platform_data = &bfin_gpe_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpf_resources[] = {
+ {
+ .start = PORTF_FER,
+ .end = PORTF_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PF0,
+ .end = IRQ_PF0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpf_pdata = {
+ .port_gpio_base = GPIO_PF0,
+ .port_pin_base = GPIO_PF0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = 3,
+ .pint_assign = false,
+ .pint_map = 3,
+};
+
+static struct platform_device bfin_gpf_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 5,
+ .num_resources = ARRAY_SIZE(bfin_gpf_resources),
+ .resource = bfin_gpf_resources,
+ .dev = {
+ .platform_data = &bfin_gpf_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpg_resources[] = {
+ {
+ .start = PORTG_FER,
+ .end = PORTG_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PG0,
+ .end = IRQ_PG0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpg_pdata = {
+ .port_gpio_base = GPIO_PG0,
+ .port_pin_base = GPIO_PG0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = -1,
+};
+
+static struct platform_device bfin_gpg_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 6,
+ .num_resources = ARRAY_SIZE(bfin_gpg_resources),
+ .resource = bfin_gpg_resources,
+ .dev = {
+ .platform_data = &bfin_gpg_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gph_resources[] = {
+ {
+ .start = PORTH_FER,
+ .end = PORTH_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PH0,
+ .end = IRQ_PH0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gph_pdata = {
+ .port_gpio_base = GPIO_PH0,
+ .port_pin_base = GPIO_PH0,
+ .port_width = 14,
+ .pint_id = -1,
+};
+
+static struct platform_device bfin_gph_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 7,
+ .num_resources = ARRAY_SIZE(bfin_gph_resources),
+ .resource = bfin_gph_resources,
+ .dev = {
+ .platform_data = &bfin_gph_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpi_resources[] = {
+ {
+ .start = PORTI_FER,
+ .end = PORTI_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PI0,
+ .end = IRQ_PI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpi_pdata = {
+ .port_gpio_base = GPIO_PI0,
+ .port_pin_base = GPIO_PI0,
+ .port_width = GPIO_BANKSIZE,
+ .pint_id = -1,
+};
+
+static struct platform_device bfin_gpi_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 8,
+ .num_resources = ARRAY_SIZE(bfin_gpi_resources),
+ .resource = bfin_gpi_resources,
+ .dev = {
+ .platform_data = &bfin_gpi_pdata, /* Passed to driver */
+ },
+};
+
+static struct resource bfin_gpj_resources[] = {
+ {
+ .start = PORTJ_FER,
+ .end = PORTJ_MUX + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PJ0,
+ .end = IRQ_PJ0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct adi_pinctrl_gpio_platform_data bfin_gpj_pdata = {
+ .port_gpio_base = GPIO_PJ0,
+ .port_pin_base = GPIO_PJ0,
+ .port_width = 14,
+ .pint_id = -1,
+};
+
+static struct platform_device bfin_gpj_device = {
+ .name = ADI_GPIO_DEVNAME,
+ .id = 9,
+ .num_resources = ARRAY_SIZE(bfin_gpj_resources),
+ .resource = bfin_gpj_resources,
+ .dev = {
+ .platform_data = &bfin_gpj_pdata, /* Passed to driver */
+ },
+};
+
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
.modalias = "m25p80", /* Name of spi_driver for this device */
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, /* Framework bus number */
- .chip_select = 1, /* SPI_SSEL1*/
+ .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1*/
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3,
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 1,
- .chip_select = 4,
+ .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
.irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 2,
+ .chip_select = MAX_CTRL_CS + GPIO_PE5, /* SPI_SSEL2 */
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 1,
+ .chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1 */
},
#endif
#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
.irq = IRQ_PC5,
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 1,
- .chip_select = 2,
+ .chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */
.mode = SPI_MODE_3,
},
#endif
/* SPI controller data */
static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
- .num_chipselect = 4,
+ .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.enable_dma = 1, /* master has the ability to do dma transfer */
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};
};
static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
- .num_chipselect = 4,
+ .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
.enable_dma = 1, /* master has the ability to do dma transfer */
.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
};
static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc,
+#if defined(CONFIG_PINCTRL_ADI2)
+ &bfin_pinctrl_device,
+ &bfin_pint0_device,
+ &bfin_pint1_device,
+ &bfin_pint2_device,
+ &bfin_pint3_device,
+ &bfin_gpa_device,
+ &bfin_gpb_device,
+ &bfin_gpc_device,
+ &bfin_gpd_device,
+ &bfin_gpe_device,
+ &bfin_gpf_device,
+ &bfin_gpg_device,
+ &bfin_gph_device,
+ &bfin_gpi_device,
+ &bfin_gpj_device,
+#endif
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
};
+/* Pin control settings */
+static struct pinctrl_map __initdata bfin_pinmux_map[] = {
+ /* per-device maps */
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.0", "pinctrl-adi2.0", NULL, "uart0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1"),
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.1", "pinctrl-adi2.0", NULL, "uart1_ctsrts"),
+#endif
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.2", "pinctrl-adi2.0", NULL, "uart2"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3"),
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-uart.3", "pinctrl-adi2.0", NULL, "uart3_ctsrts"),
+#endif
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.0", "pinctrl-adi2.0", NULL, "uart0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.2", "pinctrl-adi2.0", NULL, "uart2"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.3", "pinctrl-adi2.0", NULL, "uart3"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.0", "pinctrl-adi2.0", NULL, "spi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi.1", "pinctrl-adi2.0", NULL, "spi1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"),
+#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
+ PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"),
+#endif
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.1", "pinctrl-adi2.0", NULL, "can1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043", "pinctrl-adi2.0", NULL, "ppi0_24b"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.0", "pinctrl-adi2.0", NULL, "sport0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.1", "pinctrl-adi2.0", NULL, "sport1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.1", "pinctrl-adi2.0", NULL, "sport1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.2", "pinctrl-adi2.0", NULL, "sport2"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.2", "pinctrl-adi2.0", NULL, "sport2"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.2", "pinctrl-adi2.0", NULL, "sport2"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.3", "pinctrl-adi2.0", NULL, "sport3"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.3", "pinctrl-adi2.0", NULL, "sport3"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.3", "pinctrl-adi2.0", NULL, "sport3"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.0", "pinctrl-adi2.0", NULL, "sport0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.1", "pinctrl-adi2.0", NULL, "sport1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.2", "pinctrl-adi2.0", NULL, "sport2"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bfin-sport-uart.3", "pinctrl-adi2.0", NULL, "sport3"),
+ PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi"),
+#ifdef CONFIG_BF548_ATAPI_ALTERNATIVE_PORT
+ PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi_alter"),
+#endif
+ PIN_MAP_MUX_GROUP_DEFAULT("bf5xx-nand.0", "pinctrl-adi2.0", NULL, "nfc0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys", "pinctrl-adi2.0", NULL, "keys_4x4"),
+};
+
static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
+ /* Initialize pinmuxing */
+ pinctrl_register_mappings(bfin_pinmux_map,
+ ARRAY_SIZE(bfin_pinmux_map));
+
i2c_register_board_info(0, bfin_i2c_board_info0,
ARRAY_SIZE(bfin_i2c_board_info0));
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
&bfin_uart3_device,
#endif
#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
- &bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
- &bfin_sport1_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
- &bfin_sport2_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
- &bfin_sport3_uart_device,
-#endif
-#endif
};
void __init native_machine_early_platform_add_devices(void)
projects / linux-drm-fsl-dcu.git / blobdiff