Merge remote-tracking branches 'asoc/fix/atmel', 'asoc/fix/fsl', 'asoc/fix/tegra...

[linux-drm-fsl-dcu.git] / arch / arm / boot / dts / am335x-base0033.dts

diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index b4f95c2bbf74696577b544fd69bd41ed94dda4a9..72a9b3fc425111ec9924fb47defeffee169672e2 100644 (file)
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -13,4 +13,83 @@
 / {
        model = "IGEP COM AM335x on AQUILA Expansion";
        compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+
+       hdmi {
+               compatible = "ti,tilcdc,slave";
+               i2c = <&i2c0>;
+               pinctrl-names = "default", "off";
+               pinctrl-0 = <&nxp_hdmi_pins>;
+               pinctrl-1 = <&nxp_hdmi_off_pins>;
+               status = "okay";
+       };
+
+       leds_base {
+               pinctrl-names = "default";
+               pinctrl-0 = <&leds_base_pins>;
+
+               compatible = "gpio-leds";
+
+               led@0 {
+                       label = "base:red:user";
+                       gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;   /* gpio1_21 */
+                       default-state = "off";
+               };
+
+               led@1 {
+                       label = "base:green:user";
+                       gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;    /* gpio2_0 */
+                       default-state = "off";
+               };
+       };
+};
+
+&am33xx_pinmux {
+       nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
+               pinctrl-single,pins = <
+                       0x1b0 (PIN_OUTPUT | MUX_MODE3)  /* xdma_event_intr0.clkout1 */
+                       0xa0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data0 */
+                       0xa4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data1 */
+                       0xa8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data2 */
+                       0xac (PIN_OUTPUT | MUX_MODE0)   /* lcd_data3 */
+                       0xb0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data4 */
+                       0xb4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data5 */
+                       0xb8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data6 */
+                       0xbc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data7 */
+                       0xc0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data8 */
+                       0xc4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data9 */
+                       0xc8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data10 */
+                       0xcc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data11 */
+                       0xd0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data12 */
+                       0xd4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data13 */
+                       0xd8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data14 */
+                       0xdc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data15 */
+                       0xe0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_vsync */
+                       0xe4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_hsync */
+                       0xe8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_pclk */
+                       0xec (PIN_OUTPUT | MUX_MODE0)   /* lcd_ac_bias_en */
+               >;
+       };
+       nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
+               pinctrl-single,pins = <
+                       0x1b0 (PIN_OUTPUT | MUX_MODE3)  /* xdma_event_intr0.clkout1 */
+               >;
+       };
+
+       leds_base_pins: pinmux_leds_base_pins {
+               pinctrl-single,pins = <
+                       0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a5.gpio1_21 */
+                       0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_csn3.gpio2_0 */
+               >;
+       };
+};
+
+&lcdc {
+       status = "okay";
+};
+
+&i2c0 {
+       eeprom: eeprom@50 {
+               compatible = "at,24c256";
+               reg = <0x50>;
+       };
 };