Pull thermal into release branch

[linux-drm-fsl-dcu.git] / Documentation / usb / usb-serial.txt

diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index 50436e1663eaa18b043c5370e5c16eb63dfe18e7..5b635ae849443a1deae12b9f0c0019cc06bcc4e5 100644 (file)
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -42,12 +42,12 @@ ConnectTech WhiteHEAT 4 port converter
   http://www.connecttech.com
 
   For any questions or problems with this driver, please contact
-  Stuart MacDonald at stuartm@connecttech.com
+  Connect Tech's Support Department at support@connecttech.com
 
 
-HandSpring Visor, Palm USB, and Clié USB driver
+HandSpring Visor, Palm USB, and Clié USB driver
 
-  This driver works with all HandSpring USB, Palm USB, and Sony Clié USB
+  This driver works with all HandSpring USB, Palm USB, and Sony Clié USB
   devices.
 
   Only when the device tries to connect to the host, will the device show
@@ -69,7 +69,7 @@ HandSpring Visor, Palm USB, and Cli
   the port to use for the HotSync transfer. The "Generic" port can be used
   for other device communication, such as a PPP link.
 
-  For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the
+  For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the
   device.  This is true for all OS version 3.5 devices, and most devices
   that have had a flash upgrade to a newer version of the OS.  See the
   kernel system log for information on which is the correct port to use.
@@ -175,7 +175,7 @@ Keyspan USA-series Serial Adapters
   
   Current status:
     The USA-18X, USA-28X, USA-19, USA-19W and USA-49W are supported and
-    have been pretty throughly tested at various baud rates with 8-N-1
+    have been pretty thoroughly tested at various baud rates with 8-N-1
     character settings.  Other character lengths and parity setups are
     presently untested.
 
@@ -253,7 +253,7 @@ Cypress M8 CY4601 Family Serial Driver
        together without hacking the adapter to set the line high.
 
        The driver is smp safe.  Performance with the driver is rather low when using
-       it for transfering files.  This is being worked on, but I would be willing to
+       it for transferring files.  This is being worked on, but I would be willing to
        accept patches.  An urb queue or packet buffer would likely fit the bill here.
 
        If you have any questions, problems, patches, feature requests, etc. you can
@@ -297,7 +297,7 @@ Belkin USB Serial Adapter F5U103
       Parity       N,E,O,M,S
       Handshake    None, Software (XON/XOFF), Hardware (CTSRTS,CTSDTR)*
       Break        Set and clear
-      Line contrl  Input/Output query and control **
+      Line control Input/Output query and control **
 
       *  Hardware input flow control is only enabled for firmware
          levels above 2.06.  Read source code comments describing Belkin
@@ -309,7 +309,7 @@ Belkin USB Serial Adapter F5U103
          automatic hardware flow control.
 
   TO DO List:
-    -- Add true modem contol line query capability.  Currently tracks the
+    -- Add true modem control line query capability.  Currently tracks the
        states reported by the interrupt and the states requested.
     -- Add error reporting back to application for UART error conditions.
     -- Add support for flush ioctls.