-* Freescale 83xx DMA Controller
+* Freescale DMA Controllers
-Freescale PowerPC 83xx have on chip general purpose DMA controllers.
+** Freescale Elo DMA Controller
+ This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
+ series chips such as mpc8315, mpc8349, mpc8379 etc.
Required properties:
-- compatible : compatible list, contains 2 entries, first is
- "fsl,CHIP-dma", where CHIP is the processor
- (mpc8349, mpc8360, etc.) and the second is
- "fsl,elo-dma"
-- reg : <registers mapping for DMA general status reg>
-- ranges : Should be defined as specified in 1) to describe the
- DMA controller channels.
+- compatible : must include "fsl,elo-dma"
+- reg : DMA General Status Register, i.e. DGSR which contains
+ status for all the 4 DMA channels
+- ranges : describes the mapping between the address space of the
+ DMA channels and the address space of the DMA controller
- cell-index : controller index. 0 for controller @ 0x8100
-- interrupts : <interrupt mapping for DMA IRQ>
+- interrupts : interrupt specifier for DMA IRQ
- interrupt-parent : optional, if needed for interrupt mapping
-
- DMA channel nodes:
- - compatible : compatible list, contains 2 entries, first is
- "fsl,CHIP-dma-channel", where CHIP is the processor
- (mpc8349, mpc8350, etc.) and the second is
- "fsl,elo-dma-channel". However, see note below.
- - reg : <registers mapping for channel>
- - cell-index : dma channel index starts at 0.
+ - compatible : must include "fsl,elo-dma-channel"
+ However, see note below.
+ - reg : DMA channel specific registers
+ - cell-index : DMA channel index starts at 0.
Optional properties:
- - interrupts : <interrupt mapping for DMA channel IRQ>
- (on 83xx this is expected to be identical to
- the interrupts property of the parent node)
+ - interrupts : interrupt specifier for DMA channel IRQ
+ (on 83xx this is expected to be identical to
+ the interrupts property of the parent node)
- interrupt-parent : optional, if needed for interrupt mapping
Example:
};
};
-* Freescale 85xx/86xx DMA Controller
-
-Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers.
+** Freescale EloPlus DMA Controller
+ This is a 4-channel DMA controller with extended addresses and chaining,
+ mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as
+ mpc8540, mpc8641 p4080, bsc9131 etc.
Required properties:
-- compatible : compatible list, contains 2 entries, first is
- "fsl,CHIP-dma", where CHIP is the processor
- (mpc8540, mpc8540, etc.) and the second is
- "fsl,eloplus-dma"
-- reg : <registers mapping for DMA general status reg>
+- compatible : must include "fsl,eloplus-dma"
+- reg : DMA General Status Register, i.e. DGSR which contains
+ status for all the 4 DMA channels
- cell-index : controller index. 0 for controller @ 0x21000,
1 for controller @ 0xc000
-- ranges : Should be defined as specified in 1) to describe the
- DMA controller channels.
+- ranges : describes the mapping between the address space of the
+ DMA channels and the address space of the DMA controller
- DMA channel nodes:
- - compatible : compatible list, contains 2 entries, first is
- "fsl,CHIP-dma-channel", where CHIP is the processor
- (mpc8540, mpc8560, etc.) and the second is
- "fsl,eloplus-dma-channel". However, see note below.
- - cell-index : dma channel index starts at 0.
- - reg : <registers mapping for channel>
- - interrupts : <interrupt mapping for DMA channel IRQ>
+ - compatible : must include "fsl,eloplus-dma-channel"
+ However, see note below.
+ - cell-index : DMA channel index starts at 0.
+ - reg : DMA channel specific registers
+ - interrupts : interrupt specifier for DMA channel IRQ
- interrupt-parent : optional, if needed for interrupt mapping
Example:
};
};
+** Freescale Elo3 DMA Controller
+ DMA controller which has same function as EloPlus except that Elo3 has 8
+ channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
+ series chips, such as t1040, t4240, b4860.
+
+Required properties:
+
+- compatible : must include "fsl,elo3-dma"
+- reg : contains two entries for DMA General Status Registers,
+ i.e. DGSR0 which includes status for channel 1~4, and
+ DGSR1 for channel 5~8
+- ranges : describes the mapping between the address space of the
+ DMA channels and the address space of the DMA controller
+
+- DMA channel nodes:
+ - compatible : must include "fsl,eloplus-dma-channel"
+ - reg : DMA channel specific registers
+ - interrupts : interrupt specifier for DMA channel IRQ
+ - interrupt-parent : optional, if needed for interrupt mapping
+
+Example:
+dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elo3-dma";
+ reg = <0x100300 0x4>,
+ <0x100600 0x4>;
+ ranges = <0x0 0x100100 0x500>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ interrupts = <31 2 0 0>;
+ };
+ dma-channel@300 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x300 0x80>;
+ interrupts = <76 2 0 0>;
+ };
+ dma-channel@380 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x380 0x80>;
+ interrupts = <77 2 0 0>;
+ };
+ dma-channel@400 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x400 0x80>;
+ interrupts = <78 2 0 0>;
+ };
+ dma-channel@480 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x480 0x80>;
+ interrupts = <79 2 0 0>;
+ };
+};
+
Note on DMA channel compatible properties: The compatible property must say
"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
driver (fsldma). Any DMA channel used by fsldma cannot be used by another
projects / linux-drm-fsl-dcu.git / blobdiff