sound/soc/sti/uniperif_reader.c

   1 /*
   2  * Copyright (C) STMicroelectronics SA 2015
   3  * Authors: Arnaud Pouliquen <arnaud.pouliquen@st.com>
   4  *          for STMicroelectronics.
   5  * License terms:  GNU General Public License (GPL), version 2
   6  */
   7
   8 #include <linux/clk.h>
   9 #include <linux/delay.h>
  10 #include <linux/io.h>
  11
  12 #include <sound/soc.h>
  13
  14 #include "uniperif.h"
  15
  16 /*
  17  * Note: snd_pcm_hardware is linked to DMA controller but is declared here to
  18  * integrate unireader capability in term of rate and supported channels
  19  */
  20 static const struct snd_pcm_hardware uni_reader_pcm_hw = {
  21         .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
  22                 SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP |
  23                 SNDRV_PCM_INFO_MMAP_VALID,
  24         .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE,
  25
  26         .rates = SNDRV_PCM_RATE_CONTINUOUS,
  27         .rate_min = 8000,
  28         .rate_max = 96000,
  29
  30         .channels_min = 2,
  31         .channels_max = 8,
  32
  33         .periods_min = 2,
  34         .periods_max = 48,
  35
  36         .period_bytes_min = 128,
  37         .period_bytes_max = 64 * PAGE_SIZE,
  38         .buffer_bytes_max = 256 * PAGE_SIZE
  39 };
  40
  41 /*
  42  * uni_reader_irq_handler
  43  * In case of error audio stream is stopped; stop action is protected via PCM
  44  * stream lock  to avoid race condition with trigger callback.
  45  */
  46 static irqreturn_t uni_reader_irq_handler(int irq, void *dev_id)
  47 {
  48         irqreturn_t ret = IRQ_NONE;
  49         struct uniperif *reader = dev_id;
  50         unsigned int status;
  51
  52         if (reader->state == UNIPERIF_STATE_STOPPED) {
  53                 /* Unexpected IRQ: do nothing */
  54                 dev_warn(reader->dev, "unexpected IRQ ");
  55                 return IRQ_HANDLED;
  56         }
  57
  58         /* Get interrupt status & clear them immediately */
  59         status = GET_UNIPERIF_ITS(reader);
  60         SET_UNIPERIF_ITS_BCLR(reader, status);
  61
  62         /* Check for fifo overflow error */
  63         if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) {
  64                 dev_err(reader->dev, "FIFO error detected");
  65
  66                 snd_pcm_stream_lock(reader->substream);
  67                 snd_pcm_stop(reader->substream, SNDRV_PCM_STATE_XRUN);
  68                 snd_pcm_stream_unlock(reader->substream);
  69
  70                 return IRQ_HANDLED;
  71         }
  72
  73         return ret;
  74 }
  75
  76 static int uni_reader_prepare(struct snd_pcm_substream *substream,
  77                               struct snd_soc_dai *dai)
  78 {
  79         struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
  80         struct uniperif *reader = priv->dai_data.uni;
  81         struct snd_pcm_runtime *runtime = substream->runtime;
  82         int transfer_size, trigger_limit;
  83         int slot_width;
  84         int count = 10;
  85
  86         /* The reader should be stopped */
  87         if (reader->state != UNIPERIF_STATE_STOPPED) {
  88                 dev_err(reader->dev, "%s: invalid reader state %d", __func__,
  89                         reader->state);
  90                 return -EINVAL;
  91         }
  92
  93         /* Calculate transfer size (in fifo cells and bytes) for frame count */
  94         transfer_size = runtime->channels * UNIPERIF_FIFO_FRAMES;
  95
  96         /* Calculate number of empty cells available before asserting DREQ */
  97         if (reader->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0)
  98                 trigger_limit = UNIPERIF_FIFO_SIZE - transfer_size;
  99         else
 100                 /*
 101                  * Since SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0
 102                  * FDMA_TRIGGER_LIMIT also controls when the state switches
 103                  * from OFF or STANDBY to AUDIO DATA.
 104                  */
 105                 trigger_limit = transfer_size;
 106
 107         /* Trigger limit must be an even number */
 108         if ((!trigger_limit % 2) ||
 109             (trigger_limit != 1 && transfer_size % 2) ||
 110             (trigger_limit > UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(reader))) {
 111                 dev_err(reader->dev, "invalid trigger limit %d", trigger_limit);
 112                 return -EINVAL;
 113         }
 114
 115         SET_UNIPERIF_CONFIG_DMA_TRIG_LIMIT(reader, trigger_limit);
 116
 117         switch (reader->daifmt & SND_SOC_DAIFMT_INV_MASK) {
 118         case SND_SOC_DAIFMT_IB_IF:
 119         case SND_SOC_DAIFMT_NB_IF:
 120                 SET_UNIPERIF_I2S_FMT_LR_POL_HIG(reader);
 121                 break;
 122         default:
 123                 SET_UNIPERIF_I2S_FMT_LR_POL_LOW(reader);
 124         }
 125
 126         /* Force slot width to 32 in I2S mode */
 127         if ((reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK)
 128                 == SND_SOC_DAIFMT_I2S) {
 129                 slot_width = 32;
 130         } else {
 131                 switch (runtime->format) {
 132                 case SNDRV_PCM_FORMAT_S16_LE:
 133                         slot_width = 16;
 134                         break;
 135                 default:
 136                         slot_width = 32;
 137                         break;
 138                 }
 139         }
 140
 141         /* Number of bits per subframe (i.e one channel sample) on input. */
 142         switch (slot_width) {
 143         case 32:
 144                 SET_UNIPERIF_I2S_FMT_NBIT_32(reader);
 145                 SET_UNIPERIF_I2S_FMT_DATA_SIZE_32(reader);
 146                 break;
 147         case 16:
 148                 SET_UNIPERIF_I2S_FMT_NBIT_16(reader);
 149                 SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(reader);
 150                 break;
 151         default:
 152                 dev_err(reader->dev, "subframe format not supported");
 153                 return -EINVAL;
 154         }
 155
 156         /* Configure data memory format */
 157         switch (runtime->format) {
 158         case SNDRV_PCM_FORMAT_S16_LE:
 159                 /* One data word contains two samples */
 160                 SET_UNIPERIF_CONFIG_MEM_FMT_16_16(reader);
 161                 break;
 162
 163         case SNDRV_PCM_FORMAT_S32_LE:
 164                 /*
 165                  * Actually "16 bits/0 bits" means "32/28/24/20/18/16 bits
 166                  * on the MSB then zeros (if less than 32 bytes)"...
 167                  */
 168                 SET_UNIPERIF_CONFIG_MEM_FMT_16_0(reader);
 169                 break;
 170
 171         default:
 172                 dev_err(reader->dev, "format not supported");
 173                 return -EINVAL;
 174         }
 175
 176         switch (reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 177         case SND_SOC_DAIFMT_I2S:
 178                 SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader);
 179                 SET_UNIPERIF_I2S_FMT_PADDING_I2S_MODE(reader);
 180                 break;
 181         case SND_SOC_DAIFMT_LEFT_J:
 182                 SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader);
 183                 SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader);
 184                 break;
 185         case SND_SOC_DAIFMT_RIGHT_J:
 186                 SET_UNIPERIF_I2S_FMT_ALIGN_RIGHT(reader);
 187                 SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader);
 188                 break;
 189         default:
 190                 dev_err(reader->dev, "format not supported");
 191                 return -EINVAL;
 192         }
 193
 194         SET_UNIPERIF_I2S_FMT_ORDER_MSB(reader);
 195
 196         /* Data clocking (changing) on the rising edge */
 197         SET_UNIPERIF_I2S_FMT_SCLK_EDGE_RISING(reader);
 198
 199         /* Number of channels must be even */
 200
 201         if ((runtime->channels % 2) || (runtime->channels < 2) ||
 202             (runtime->channels > 10)) {
 203                 dev_err(reader->dev, "%s: invalid nb of channels", __func__);
 204                 return -EINVAL;
 205         }
 206
 207         SET_UNIPERIF_I2S_FMT_NUM_CH(reader, runtime->channels / 2);
 208
 209         /* Clear any pending interrupts */
 210         SET_UNIPERIF_ITS_BCLR(reader, GET_UNIPERIF_ITS(reader));
 211
 212         SET_UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ(reader, 0);
 213
 214         /* Set the interrupt mask */
 215         SET_UNIPERIF_ITM_BSET_DMA_ERROR(reader);
 216         SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader);
 217         SET_UNIPERIF_ITM_BSET_MEM_BLK_READ(reader);
 218
 219         /* Enable underflow recovery interrupts */
 220         if (reader->info->underflow_enabled) {
 221                 SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE(reader);
 222                 SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED(reader);
 223         }
 224
 225         /* Reset uniperipheral reader */
 226         SET_UNIPERIF_SOFT_RST_SOFT_RST(reader);
 227
 228         while (GET_UNIPERIF_SOFT_RST_SOFT_RST(reader)) {
 229                 udelay(5);
 230                 count--;
 231         }
 232         if (!count) {
 233                 dev_err(reader->dev, "Failed to reset uniperif");
 234                 return -EIO;
 235         }
 236
 237         return 0;
 238 }
 239
 240 static int uni_reader_start(struct uniperif *reader)
 241 {
 242         /* The reader should be stopped */
 243         if (reader->state != UNIPERIF_STATE_STOPPED) {
 244                 dev_err(reader->dev, "%s: invalid reader state", __func__);
 245                 return -EINVAL;
 246         }
 247
 248         /* Enable reader interrupts (and clear possible stalled ones) */
 249         SET_UNIPERIF_ITS_BCLR_FIFO_ERROR(reader);
 250         SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader);
 251
 252         /* Launch the reader */
 253         SET_UNIPERIF_CTRL_OPERATION_PCM_DATA(reader);
 254
 255         /* Update state to started */
 256         reader->state = UNIPERIF_STATE_STARTED;
 257         return 0;
 258 }
 259
 260 static int uni_reader_stop(struct uniperif *reader)
 261 {
 262         /* The reader should not be in stopped state */
 263         if (reader->state == UNIPERIF_STATE_STOPPED) {
 264                 dev_err(reader->dev, "%s: invalid reader state", __func__);
 265                 return -EINVAL;
 266         }
 267
 268         /* Turn the reader off */
 269         SET_UNIPERIF_CTRL_OPERATION_OFF(reader);
 270
 271         /* Disable interrupts */
 272         SET_UNIPERIF_ITM_BCLR(reader, GET_UNIPERIF_ITM(reader));
 273
 274         /* Update state to stopped and return */
 275         reader->state = UNIPERIF_STATE_STOPPED;
 276
 277         return 0;
 278 }
 279
 280 static int  uni_reader_trigger(struct snd_pcm_substream *substream,
 281                                int cmd, struct snd_soc_dai *dai)
 282 {
 283         struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
 284         struct uniperif *reader = priv->dai_data.uni;
 285
 286         switch (cmd) {
 287         case SNDRV_PCM_TRIGGER_START:
 288                 return  uni_reader_start(reader);
 289         case SNDRV_PCM_TRIGGER_STOP:
 290                 return  uni_reader_stop(reader);
 291         default:
 292                 return -EINVAL;
 293         }
 294 }
 295
 296 static void uni_reader_shutdown(struct snd_pcm_substream *substream,
 297                                 struct snd_soc_dai *dai)
 298 {
 299         struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
 300         struct uniperif *reader = priv->dai_data.uni;
 301
 302         if (reader->state != UNIPERIF_STATE_STOPPED) {
 303                 /* Stop the reader */
 304                 uni_reader_stop(reader);
 305         }
 306 }
 307
 308 static int uni_reader_parse_dt(struct platform_device *pdev,
 309                                struct uniperif *reader)
 310 {
 311         struct uniperif_info *info;
 312         struct device_node *node = pdev->dev.of_node;
 313
 314         /* Allocate memory for the info structure */
 315         info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 316         if (!info)
 317                 return -ENOMEM;
 318
 319         if (of_property_read_u32(node, "version", &reader->ver) ||
 320             reader->ver == SND_ST_UNIPERIF_VERSION_UNKNOWN) {
 321                 dev_err(&pdev->dev, "Unknown uniperipheral version ");
 322                 return -EINVAL;
 323         }
 324
 325         /* Save the info structure */
 326         reader->info = info;
 327
 328         return 0;
 329 }
 330
 331 static const struct snd_soc_dai_ops uni_reader_dai_ops = {
 332                 .shutdown = uni_reader_shutdown,
 333                 .prepare = uni_reader_prepare,
 334                 .trigger = uni_reader_trigger,
 335                 .hw_params = sti_uniperiph_dai_hw_params,
 336                 .set_fmt = sti_uniperiph_dai_set_fmt,
 337 };
 338
 339 int uni_reader_init(struct platform_device *pdev,
 340                     struct uniperif *reader)
 341 {
 342         int ret = 0;
 343
 344         reader->dev = &pdev->dev;
 345         reader->state = UNIPERIF_STATE_STOPPED;
 346         reader->hw = &uni_reader_pcm_hw;
 347         reader->dai_ops = &uni_reader_dai_ops;
 348
 349         dev_err(reader->dev, "%s: enter\n", __func__);
 350         ret = uni_reader_parse_dt(pdev, reader);
 351         if (ret < 0) {
 352                 dev_err(reader->dev, "Failed to parse DeviceTree");
 353                 return ret;
 354         }
 355
 356         ret = devm_request_irq(&pdev->dev, reader->irq,
 357                                uni_reader_irq_handler, IRQF_SHARED,
 358                                dev_name(&pdev->dev), reader);
 359         if (ret < 0) {
 360                 dev_err(&pdev->dev, "Failed to request IRQ");
 361                 return -EBUSY;
 362         }
 363
 364         return 0;
 365 }
 366 EXPORT_SYMBOL_GPL(uni_reader_init);