Merge remote-tracking branches 'asoc/fix/tlv320aic3x' and 'asoc/fix/wm8962' into...
[linux-drm-fsl-dcu.git] / net / ipv4 / arp.c
1 /* linux/net/ipv4/arp.c
2  *
3  * Copyright (C) 1994 by Florian  La Roche
4  *
5  * This module implements the Address Resolution Protocol ARP (RFC 826),
6  * which is used to convert IP addresses (or in the future maybe other
7  * high-level addresses) into a low-level hardware address (like an Ethernet
8  * address).
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License
12  * as published by the Free Software Foundation; either version
13  * 2 of the License, or (at your option) any later version.
14  *
15  * Fixes:
16  *              Alan Cox        :       Removed the Ethernet assumptions in
17  *                                      Florian's code
18  *              Alan Cox        :       Fixed some small errors in the ARP
19  *                                      logic
20  *              Alan Cox        :       Allow >4K in /proc
21  *              Alan Cox        :       Make ARP add its own protocol entry
22  *              Ross Martin     :       Rewrote arp_rcv() and arp_get_info()
23  *              Stephen Henson  :       Add AX25 support to arp_get_info()
24  *              Alan Cox        :       Drop data when a device is downed.
25  *              Alan Cox        :       Use init_timer().
26  *              Alan Cox        :       Double lock fixes.
27  *              Martin Seine    :       Move the arphdr structure
28  *                                      to if_arp.h for compatibility.
29  *                                      with BSD based programs.
30  *              Andrew Tridgell :       Added ARP netmask code and
31  *                                      re-arranged proxy handling.
32  *              Alan Cox        :       Changed to use notifiers.
33  *              Niibe Yutaka    :       Reply for this device or proxies only.
34  *              Alan Cox        :       Don't proxy across hardware types!
35  *              Jonathan Naylor :       Added support for NET/ROM.
36  *              Mike Shaver     :       RFC1122 checks.
37  *              Jonathan Naylor :       Only lookup the hardware address for
38  *                                      the correct hardware type.
39  *              Germano Caronni :       Assorted subtle races.
40  *              Craig Schlenter :       Don't modify permanent entry
41  *                                      during arp_rcv.
42  *              Russ Nelson     :       Tidied up a few bits.
43  *              Alexey Kuznetsov:       Major changes to caching and behaviour,
44  *                                      eg intelligent arp probing and
45  *                                      generation
46  *                                      of host down events.
47  *              Alan Cox        :       Missing unlock in device events.
48  *              Eckes           :       ARP ioctl control errors.
49  *              Alexey Kuznetsov:       Arp free fix.
50  *              Manuel Rodriguez:       Gratuitous ARP.
51  *              Jonathan Layes  :       Added arpd support through kerneld
52  *                                      message queue (960314)
53  *              Mike Shaver     :       /proc/sys/net/ipv4/arp_* support
54  *              Mike McLagan    :       Routing by source
55  *              Stuart Cheshire :       Metricom and grat arp fixes
56  *                                      *** FOR 2.1 clean this up ***
57  *              Lawrence V. Stefani: (08/12/96) Added FDDI support.
58  *              Alan Cox        :       Took the AP1000 nasty FDDI hack and
59  *                                      folded into the mainstream FDDI code.
60  *                                      Ack spit, Linus how did you allow that
61  *                                      one in...
62  *              Jes Sorensen    :       Make FDDI work again in 2.1.x and
63  *                                      clean up the APFDDI & gen. FDDI bits.
64  *              Alexey Kuznetsov:       new arp state machine;
65  *                                      now it is in net/core/neighbour.c.
66  *              Krzysztof Halasa:       Added Frame Relay ARP support.
67  *              Arnaldo C. Melo :       convert /proc/net/arp to seq_file
68  *              Shmulik Hen:            Split arp_send to arp_create and
69  *                                      arp_xmit so intermediate drivers like
70  *                                      bonding can change the skb before
71  *                                      sending (e.g. insert 8021q tag).
72  *              Harald Welte    :       convert to make use of jenkins hash
73  *              Jesper D. Brouer:       Proxy ARP PVLAN RFC 3069 support.
74  */
75
76 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
77
78 #include <linux/module.h>
79 #include <linux/types.h>
80 #include <linux/string.h>
81 #include <linux/kernel.h>
82 #include <linux/capability.h>
83 #include <linux/socket.h>
84 #include <linux/sockios.h>
85 #include <linux/errno.h>
86 #include <linux/in.h>
87 #include <linux/mm.h>
88 #include <linux/inet.h>
89 #include <linux/inetdevice.h>
90 #include <linux/netdevice.h>
91 #include <linux/etherdevice.h>
92 #include <linux/fddidevice.h>
93 #include <linux/if_arp.h>
94 #include <linux/skbuff.h>
95 #include <linux/proc_fs.h>
96 #include <linux/seq_file.h>
97 #include <linux/stat.h>
98 #include <linux/init.h>
99 #include <linux/net.h>
100 #include <linux/rcupdate.h>
101 #include <linux/slab.h>
102 #ifdef CONFIG_SYSCTL
103 #include <linux/sysctl.h>
104 #endif
105
106 #include <net/net_namespace.h>
107 #include <net/ip.h>
108 #include <net/icmp.h>
109 #include <net/route.h>
110 #include <net/protocol.h>
111 #include <net/tcp.h>
112 #include <net/sock.h>
113 #include <net/arp.h>
114 #include <net/ax25.h>
115 #include <net/netrom.h>
116 #include <net/dst_metadata.h>
117 #include <net/ip_tunnels.h>
118
119 #include <linux/uaccess.h>
120
121 #include <linux/netfilter_arp.h>
122
123 /*
124  *      Interface to generic neighbour cache.
125  */
126 static u32 arp_hash(const void *pkey, const struct net_device *dev, __u32 *hash_rnd);
127 static bool arp_key_eq(const struct neighbour *n, const void *pkey);
128 static int arp_constructor(struct neighbour *neigh);
129 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb);
130 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
131 static void parp_redo(struct sk_buff *skb);
132
133 static const struct neigh_ops arp_generic_ops = {
134         .family =               AF_INET,
135         .solicit =              arp_solicit,
136         .error_report =         arp_error_report,
137         .output =               neigh_resolve_output,
138         .connected_output =     neigh_connected_output,
139 };
140
141 static const struct neigh_ops arp_hh_ops = {
142         .family =               AF_INET,
143         .solicit =              arp_solicit,
144         .error_report =         arp_error_report,
145         .output =               neigh_resolve_output,
146         .connected_output =     neigh_resolve_output,
147 };
148
149 static const struct neigh_ops arp_direct_ops = {
150         .family =               AF_INET,
151         .output =               neigh_direct_output,
152         .connected_output =     neigh_direct_output,
153 };
154
155 struct neigh_table arp_tbl = {
156         .family         = AF_INET,
157         .key_len        = 4,
158         .protocol       = cpu_to_be16(ETH_P_IP),
159         .hash           = arp_hash,
160         .key_eq         = arp_key_eq,
161         .constructor    = arp_constructor,
162         .proxy_redo     = parp_redo,
163         .id             = "arp_cache",
164         .parms          = {
165                 .tbl                    = &arp_tbl,
166                 .reachable_time         = 30 * HZ,
167                 .data   = {
168                         [NEIGH_VAR_MCAST_PROBES] = 3,
169                         [NEIGH_VAR_UCAST_PROBES] = 3,
170                         [NEIGH_VAR_RETRANS_TIME] = 1 * HZ,
171                         [NEIGH_VAR_BASE_REACHABLE_TIME] = 30 * HZ,
172                         [NEIGH_VAR_DELAY_PROBE_TIME] = 5 * HZ,
173                         [NEIGH_VAR_GC_STALETIME] = 60 * HZ,
174                         [NEIGH_VAR_QUEUE_LEN_BYTES] = 64 * 1024,
175                         [NEIGH_VAR_PROXY_QLEN] = 64,
176                         [NEIGH_VAR_ANYCAST_DELAY] = 1 * HZ,
177                         [NEIGH_VAR_PROXY_DELAY] = (8 * HZ) / 10,
178                         [NEIGH_VAR_LOCKTIME] = 1 * HZ,
179                 },
180         },
181         .gc_interval    = 30 * HZ,
182         .gc_thresh1     = 128,
183         .gc_thresh2     = 512,
184         .gc_thresh3     = 1024,
185 };
186 EXPORT_SYMBOL(arp_tbl);
187
188 int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir)
189 {
190         switch (dev->type) {
191         case ARPHRD_ETHER:
192         case ARPHRD_FDDI:
193         case ARPHRD_IEEE802:
194                 ip_eth_mc_map(addr, haddr);
195                 return 0;
196         case ARPHRD_INFINIBAND:
197                 ip_ib_mc_map(addr, dev->broadcast, haddr);
198                 return 0;
199         case ARPHRD_IPGRE:
200                 ip_ipgre_mc_map(addr, dev->broadcast, haddr);
201                 return 0;
202         default:
203                 if (dir) {
204                         memcpy(haddr, dev->broadcast, dev->addr_len);
205                         return 0;
206                 }
207         }
208         return -EINVAL;
209 }
210
211
212 static u32 arp_hash(const void *pkey,
213                     const struct net_device *dev,
214                     __u32 *hash_rnd)
215 {
216         return arp_hashfn(pkey, dev, hash_rnd);
217 }
218
219 static bool arp_key_eq(const struct neighbour *neigh, const void *pkey)
220 {
221         return neigh_key_eq32(neigh, pkey);
222 }
223
224 static int arp_constructor(struct neighbour *neigh)
225 {
226         __be32 addr = *(__be32 *)neigh->primary_key;
227         struct net_device *dev = neigh->dev;
228         struct in_device *in_dev;
229         struct neigh_parms *parms;
230
231         rcu_read_lock();
232         in_dev = __in_dev_get_rcu(dev);
233         if (!in_dev) {
234                 rcu_read_unlock();
235                 return -EINVAL;
236         }
237
238         neigh->type = inet_addr_type_dev_table(dev_net(dev), dev, addr);
239
240         parms = in_dev->arp_parms;
241         __neigh_parms_put(neigh->parms);
242         neigh->parms = neigh_parms_clone(parms);
243         rcu_read_unlock();
244
245         if (!dev->header_ops) {
246                 neigh->nud_state = NUD_NOARP;
247                 neigh->ops = &arp_direct_ops;
248                 neigh->output = neigh_direct_output;
249         } else {
250                 /* Good devices (checked by reading texts, but only Ethernet is
251                    tested)
252
253                    ARPHRD_ETHER: (ethernet, apfddi)
254                    ARPHRD_FDDI: (fddi)
255                    ARPHRD_IEEE802: (tr)
256                    ARPHRD_METRICOM: (strip)
257                    ARPHRD_ARCNET:
258                    etc. etc. etc.
259
260                    ARPHRD_IPDDP will also work, if author repairs it.
261                    I did not it, because this driver does not work even
262                    in old paradigm.
263                  */
264
265                 if (neigh->type == RTN_MULTICAST) {
266                         neigh->nud_state = NUD_NOARP;
267                         arp_mc_map(addr, neigh->ha, dev, 1);
268                 } else if (dev->flags & (IFF_NOARP | IFF_LOOPBACK)) {
269                         neigh->nud_state = NUD_NOARP;
270                         memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
271                 } else if (neigh->type == RTN_BROADCAST ||
272                            (dev->flags & IFF_POINTOPOINT)) {
273                         neigh->nud_state = NUD_NOARP;
274                         memcpy(neigh->ha, dev->broadcast, dev->addr_len);
275                 }
276
277                 if (dev->header_ops->cache)
278                         neigh->ops = &arp_hh_ops;
279                 else
280                         neigh->ops = &arp_generic_ops;
281
282                 if (neigh->nud_state & NUD_VALID)
283                         neigh->output = neigh->ops->connected_output;
284                 else
285                         neigh->output = neigh->ops->output;
286         }
287         return 0;
288 }
289
290 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb)
291 {
292         dst_link_failure(skb);
293         kfree_skb(skb);
294 }
295
296 /* Create and send an arp packet. */
297 static void arp_send_dst(int type, int ptype, __be32 dest_ip,
298                          struct net_device *dev, __be32 src_ip,
299                          const unsigned char *dest_hw,
300                          const unsigned char *src_hw,
301                          const unsigned char *target_hw,
302                          struct dst_entry *dst)
303 {
304         struct sk_buff *skb;
305
306         /* arp on this interface. */
307         if (dev->flags & IFF_NOARP)
308                 return;
309
310         skb = arp_create(type, ptype, dest_ip, dev, src_ip,
311                          dest_hw, src_hw, target_hw);
312         if (!skb)
313                 return;
314
315         skb_dst_set(skb, dst);
316         arp_xmit(skb);
317 }
318
319 void arp_send(int type, int ptype, __be32 dest_ip,
320               struct net_device *dev, __be32 src_ip,
321               const unsigned char *dest_hw, const unsigned char *src_hw,
322               const unsigned char *target_hw)
323 {
324         arp_send_dst(type, ptype, dest_ip, dev, src_ip, dest_hw, src_hw,
325                      target_hw, NULL);
326 }
327 EXPORT_SYMBOL(arp_send);
328
329 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
330 {
331         __be32 saddr = 0;
332         u8 dst_ha[MAX_ADDR_LEN], *dst_hw = NULL;
333         struct net_device *dev = neigh->dev;
334         __be32 target = *(__be32 *)neigh->primary_key;
335         int probes = atomic_read(&neigh->probes);
336         struct in_device *in_dev;
337         struct dst_entry *dst = NULL;
338
339         rcu_read_lock();
340         in_dev = __in_dev_get_rcu(dev);
341         if (!in_dev) {
342                 rcu_read_unlock();
343                 return;
344         }
345         switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
346         default:
347         case 0:         /* By default announce any local IP */
348                 if (skb && inet_addr_type_dev_table(dev_net(dev), dev,
349                                           ip_hdr(skb)->saddr) == RTN_LOCAL)
350                         saddr = ip_hdr(skb)->saddr;
351                 break;
352         case 1:         /* Restrict announcements of saddr in same subnet */
353                 if (!skb)
354                         break;
355                 saddr = ip_hdr(skb)->saddr;
356                 if (inet_addr_type_dev_table(dev_net(dev), dev,
357                                              saddr) == RTN_LOCAL) {
358                         /* saddr should be known to target */
359                         if (inet_addr_onlink(in_dev, target, saddr))
360                                 break;
361                 }
362                 saddr = 0;
363                 break;
364         case 2:         /* Avoid secondary IPs, get a primary/preferred one */
365                 break;
366         }
367         rcu_read_unlock();
368
369         if (!saddr)
370                 saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
371
372         probes -= NEIGH_VAR(neigh->parms, UCAST_PROBES);
373         if (probes < 0) {
374                 if (!(neigh->nud_state & NUD_VALID))
375                         pr_debug("trying to ucast probe in NUD_INVALID\n");
376                 neigh_ha_snapshot(dst_ha, neigh, dev);
377                 dst_hw = dst_ha;
378         } else {
379                 probes -= NEIGH_VAR(neigh->parms, APP_PROBES);
380                 if (probes < 0) {
381                         neigh_app_ns(neigh);
382                         return;
383                 }
384         }
385
386         if (skb && !(dev->priv_flags & IFF_XMIT_DST_RELEASE))
387                 dst = dst_clone(skb_dst(skb));
388         arp_send_dst(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
389                      dst_hw, dev->dev_addr, NULL, dst);
390 }
391
392 static int arp_ignore(struct in_device *in_dev, __be32 sip, __be32 tip)
393 {
394         struct net *net = dev_net(in_dev->dev);
395         int scope;
396
397         switch (IN_DEV_ARP_IGNORE(in_dev)) {
398         case 0: /* Reply, the tip is already validated */
399                 return 0;
400         case 1: /* Reply only if tip is configured on the incoming interface */
401                 sip = 0;
402                 scope = RT_SCOPE_HOST;
403                 break;
404         case 2: /*
405                  * Reply only if tip is configured on the incoming interface
406                  * and is in same subnet as sip
407                  */
408                 scope = RT_SCOPE_HOST;
409                 break;
410         case 3: /* Do not reply for scope host addresses */
411                 sip = 0;
412                 scope = RT_SCOPE_LINK;
413                 in_dev = NULL;
414                 break;
415         case 4: /* Reserved */
416         case 5:
417         case 6:
418         case 7:
419                 return 0;
420         case 8: /* Do not reply */
421                 return 1;
422         default:
423                 return 0;
424         }
425         return !inet_confirm_addr(net, in_dev, sip, tip, scope);
426 }
427
428 static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev)
429 {
430         struct rtable *rt;
431         int flag = 0;
432         /*unsigned long now; */
433         struct net *net = dev_net(dev);
434
435         rt = ip_route_output(net, sip, tip, 0, 0);
436         if (IS_ERR(rt))
437                 return 1;
438         if (rt->dst.dev != dev) {
439                 NET_INC_STATS_BH(net, LINUX_MIB_ARPFILTER);
440                 flag = 1;
441         }
442         ip_rt_put(rt);
443         return flag;
444 }
445
446 /*
447  * Check if we can use proxy ARP for this path
448  */
449 static inline int arp_fwd_proxy(struct in_device *in_dev,
450                                 struct net_device *dev, struct rtable *rt)
451 {
452         struct in_device *out_dev;
453         int imi, omi = -1;
454
455         if (rt->dst.dev == dev)
456                 return 0;
457
458         if (!IN_DEV_PROXY_ARP(in_dev))
459                 return 0;
460         imi = IN_DEV_MEDIUM_ID(in_dev);
461         if (imi == 0)
462                 return 1;
463         if (imi == -1)
464                 return 0;
465
466         /* place to check for proxy_arp for routes */
467
468         out_dev = __in_dev_get_rcu(rt->dst.dev);
469         if (out_dev)
470                 omi = IN_DEV_MEDIUM_ID(out_dev);
471
472         return omi != imi && omi != -1;
473 }
474
475 /*
476  * Check for RFC3069 proxy arp private VLAN (allow to send back to same dev)
477  *
478  * RFC3069 supports proxy arp replies back to the same interface.  This
479  * is done to support (ethernet) switch features, like RFC 3069, where
480  * the individual ports are not allowed to communicate with each
481  * other, BUT they are allowed to talk to the upstream router.  As
482  * described in RFC 3069, it is possible to allow these hosts to
483  * communicate through the upstream router, by proxy_arp'ing.
484  *
485  * RFC 3069: "VLAN Aggregation for Efficient IP Address Allocation"
486  *
487  *  This technology is known by different names:
488  *    In RFC 3069 it is called VLAN Aggregation.
489  *    Cisco and Allied Telesyn call it Private VLAN.
490  *    Hewlett-Packard call it Source-Port filtering or port-isolation.
491  *    Ericsson call it MAC-Forced Forwarding (RFC Draft).
492  *
493  */
494 static inline int arp_fwd_pvlan(struct in_device *in_dev,
495                                 struct net_device *dev, struct rtable *rt,
496                                 __be32 sip, __be32 tip)
497 {
498         /* Private VLAN is only concerned about the same ethernet segment */
499         if (rt->dst.dev != dev)
500                 return 0;
501
502         /* Don't reply on self probes (often done by windowz boxes)*/
503         if (sip == tip)
504                 return 0;
505
506         if (IN_DEV_PROXY_ARP_PVLAN(in_dev))
507                 return 1;
508         else
509                 return 0;
510 }
511
512 /*
513  *      Interface to link layer: send routine and receive handler.
514  */
515
516 /*
517  *      Create an arp packet. If dest_hw is not set, we create a broadcast
518  *      message.
519  */
520 struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
521                            struct net_device *dev, __be32 src_ip,
522                            const unsigned char *dest_hw,
523                            const unsigned char *src_hw,
524                            const unsigned char *target_hw)
525 {
526         struct sk_buff *skb;
527         struct arphdr *arp;
528         unsigned char *arp_ptr;
529         int hlen = LL_RESERVED_SPACE(dev);
530         int tlen = dev->needed_tailroom;
531
532         /*
533          *      Allocate a buffer
534          */
535
536         skb = alloc_skb(arp_hdr_len(dev) + hlen + tlen, GFP_ATOMIC);
537         if (!skb)
538                 return NULL;
539
540         skb_reserve(skb, hlen);
541         skb_reset_network_header(skb);
542         arp = (struct arphdr *) skb_put(skb, arp_hdr_len(dev));
543         skb->dev = dev;
544         skb->protocol = htons(ETH_P_ARP);
545         if (!src_hw)
546                 src_hw = dev->dev_addr;
547         if (!dest_hw)
548                 dest_hw = dev->broadcast;
549
550         /*
551          *      Fill the device header for the ARP frame
552          */
553         if (dev_hard_header(skb, dev, ptype, dest_hw, src_hw, skb->len) < 0)
554                 goto out;
555
556         /*
557          * Fill out the arp protocol part.
558          *
559          * The arp hardware type should match the device type, except for FDDI,
560          * which (according to RFC 1390) should always equal 1 (Ethernet).
561          */
562         /*
563          *      Exceptions everywhere. AX.25 uses the AX.25 PID value not the
564          *      DIX code for the protocol. Make these device structure fields.
565          */
566         switch (dev->type) {
567         default:
568                 arp->ar_hrd = htons(dev->type);
569                 arp->ar_pro = htons(ETH_P_IP);
570                 break;
571
572 #if IS_ENABLED(CONFIG_AX25)
573         case ARPHRD_AX25:
574                 arp->ar_hrd = htons(ARPHRD_AX25);
575                 arp->ar_pro = htons(AX25_P_IP);
576                 break;
577
578 #if IS_ENABLED(CONFIG_NETROM)
579         case ARPHRD_NETROM:
580                 arp->ar_hrd = htons(ARPHRD_NETROM);
581                 arp->ar_pro = htons(AX25_P_IP);
582                 break;
583 #endif
584 #endif
585
586 #if IS_ENABLED(CONFIG_FDDI)
587         case ARPHRD_FDDI:
588                 arp->ar_hrd = htons(ARPHRD_ETHER);
589                 arp->ar_pro = htons(ETH_P_IP);
590                 break;
591 #endif
592         }
593
594         arp->ar_hln = dev->addr_len;
595         arp->ar_pln = 4;
596         arp->ar_op = htons(type);
597
598         arp_ptr = (unsigned char *)(arp + 1);
599
600         memcpy(arp_ptr, src_hw, dev->addr_len);
601         arp_ptr += dev->addr_len;
602         memcpy(arp_ptr, &src_ip, 4);
603         arp_ptr += 4;
604
605         switch (dev->type) {
606 #if IS_ENABLED(CONFIG_FIREWIRE_NET)
607         case ARPHRD_IEEE1394:
608                 break;
609 #endif
610         default:
611                 if (target_hw)
612                         memcpy(arp_ptr, target_hw, dev->addr_len);
613                 else
614                         memset(arp_ptr, 0, dev->addr_len);
615                 arp_ptr += dev->addr_len;
616         }
617         memcpy(arp_ptr, &dest_ip, 4);
618
619         return skb;
620
621 out:
622         kfree_skb(skb);
623         return NULL;
624 }
625 EXPORT_SYMBOL(arp_create);
626
627 /*
628  *      Send an arp packet.
629  */
630 void arp_xmit(struct sk_buff *skb)
631 {
632         /* Send it off, maybe filter it using firewalling first.  */
633         NF_HOOK(NFPROTO_ARP, NF_ARP_OUT, NULL, skb,
634                 NULL, skb->dev, dev_queue_xmit_sk);
635 }
636 EXPORT_SYMBOL(arp_xmit);
637
638 /*
639  *      Process an arp request.
640  */
641
642 static int arp_process(struct sock *sk, struct sk_buff *skb)
643 {
644         struct net_device *dev = skb->dev;
645         struct in_device *in_dev = __in_dev_get_rcu(dev);
646         struct arphdr *arp;
647         unsigned char *arp_ptr;
648         struct rtable *rt;
649         unsigned char *sha;
650         __be32 sip, tip;
651         u16 dev_type = dev->type;
652         int addr_type;
653         struct neighbour *n;
654         struct net *net = dev_net(dev);
655         struct dst_entry *reply_dst = NULL;
656         bool is_garp = false;
657
658         /* arp_rcv below verifies the ARP header and verifies the device
659          * is ARP'able.
660          */
661
662         if (!in_dev)
663                 goto out;
664
665         arp = arp_hdr(skb);
666
667         switch (dev_type) {
668         default:
669                 if (arp->ar_pro != htons(ETH_P_IP) ||
670                     htons(dev_type) != arp->ar_hrd)
671                         goto out;
672                 break;
673         case ARPHRD_ETHER:
674         case ARPHRD_FDDI:
675         case ARPHRD_IEEE802:
676                 /*
677                  * ETHERNET, and Fibre Channel (which are IEEE 802
678                  * devices, according to RFC 2625) devices will accept ARP
679                  * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
680                  * This is the case also of FDDI, where the RFC 1390 says that
681                  * FDDI devices should accept ARP hardware of (1) Ethernet,
682                  * however, to be more robust, we'll accept both 1 (Ethernet)
683                  * or 6 (IEEE 802.2)
684                  */
685                 if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
686                      arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
687                     arp->ar_pro != htons(ETH_P_IP))
688                         goto out;
689                 break;
690         case ARPHRD_AX25:
691                 if (arp->ar_pro != htons(AX25_P_IP) ||
692                     arp->ar_hrd != htons(ARPHRD_AX25))
693                         goto out;
694                 break;
695         case ARPHRD_NETROM:
696                 if (arp->ar_pro != htons(AX25_P_IP) ||
697                     arp->ar_hrd != htons(ARPHRD_NETROM))
698                         goto out;
699                 break;
700         }
701
702         /* Understand only these message types */
703
704         if (arp->ar_op != htons(ARPOP_REPLY) &&
705             arp->ar_op != htons(ARPOP_REQUEST))
706                 goto out;
707
708 /*
709  *      Extract fields
710  */
711         arp_ptr = (unsigned char *)(arp + 1);
712         sha     = arp_ptr;
713         arp_ptr += dev->addr_len;
714         memcpy(&sip, arp_ptr, 4);
715         arp_ptr += 4;
716         switch (dev_type) {
717 #if IS_ENABLED(CONFIG_FIREWIRE_NET)
718         case ARPHRD_IEEE1394:
719                 break;
720 #endif
721         default:
722                 arp_ptr += dev->addr_len;
723         }
724         memcpy(&tip, arp_ptr, 4);
725 /*
726  *      Check for bad requests for 127.x.x.x and requests for multicast
727  *      addresses.  If this is one such, delete it.
728  */
729         if (ipv4_is_multicast(tip) ||
730             (!IN_DEV_ROUTE_LOCALNET(in_dev) && ipv4_is_loopback(tip)))
731                 goto out;
732
733 /*
734  *     Special case: We must set Frame Relay source Q.922 address
735  */
736         if (dev_type == ARPHRD_DLCI)
737                 sha = dev->broadcast;
738
739 /*
740  *  Process entry.  The idea here is we want to send a reply if it is a
741  *  request for us or if it is a request for someone else that we hold
742  *  a proxy for.  We want to add an entry to our cache if it is a reply
743  *  to us or if it is a request for our address.
744  *  (The assumption for this last is that if someone is requesting our
745  *  address, they are probably intending to talk to us, so it saves time
746  *  if we cache their address.  Their address is also probably not in
747  *  our cache, since ours is not in their cache.)
748  *
749  *  Putting this another way, we only care about replies if they are to
750  *  us, in which case we add them to the cache.  For requests, we care
751  *  about those for us and those for our proxies.  We reply to both,
752  *  and in the case of requests for us we add the requester to the arp
753  *  cache.
754  */
755
756         if (arp->ar_op == htons(ARPOP_REQUEST) && skb_metadata_dst(skb))
757                 reply_dst = (struct dst_entry *)
758                             iptunnel_metadata_reply(skb_metadata_dst(skb),
759                                                     GFP_ATOMIC);
760
761         /* Special case: IPv4 duplicate address detection packet (RFC2131) */
762         if (sip == 0) {
763                 if (arp->ar_op == htons(ARPOP_REQUEST) &&
764                     inet_addr_type_dev_table(net, dev, tip) == RTN_LOCAL &&
765                     !arp_ignore(in_dev, sip, tip))
766                         arp_send_dst(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip,
767                                      sha, dev->dev_addr, sha, reply_dst);
768                 goto out;
769         }
770
771         if (arp->ar_op == htons(ARPOP_REQUEST) &&
772             ip_route_input_noref(skb, tip, sip, 0, dev) == 0) {
773
774                 rt = skb_rtable(skb);
775                 addr_type = rt->rt_type;
776
777                 if (addr_type == RTN_LOCAL) {
778                         int dont_send;
779
780                         dont_send = arp_ignore(in_dev, sip, tip);
781                         if (!dont_send && IN_DEV_ARPFILTER(in_dev))
782                                 dont_send = arp_filter(sip, tip, dev);
783                         if (!dont_send) {
784                                 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
785                                 if (n) {
786                                         arp_send_dst(ARPOP_REPLY, ETH_P_ARP,
787                                                      sip, dev, tip, sha,
788                                                      dev->dev_addr, sha,
789                                                      reply_dst);
790                                         neigh_release(n);
791                                 }
792                         }
793                         goto out;
794                 } else if (IN_DEV_FORWARD(in_dev)) {
795                         if (addr_type == RTN_UNICAST  &&
796                             (arp_fwd_proxy(in_dev, dev, rt) ||
797                              arp_fwd_pvlan(in_dev, dev, rt, sip, tip) ||
798                              (rt->dst.dev != dev &&
799                               pneigh_lookup(&arp_tbl, net, &tip, dev, 0)))) {
800                                 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
801                                 if (n)
802                                         neigh_release(n);
803
804                                 if (NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED ||
805                                     skb->pkt_type == PACKET_HOST ||
806                                     NEIGH_VAR(in_dev->arp_parms, PROXY_DELAY) == 0) {
807                                         arp_send_dst(ARPOP_REPLY, ETH_P_ARP,
808                                                      sip, dev, tip, sha,
809                                                      dev->dev_addr, sha,
810                                                      reply_dst);
811                                 } else {
812                                         pneigh_enqueue(&arp_tbl,
813                                                        in_dev->arp_parms, skb);
814                                         return 0;
815                                 }
816                                 goto out;
817                         }
818                 }
819         }
820
821         /* Update our ARP tables */
822
823         n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
824
825         if (IN_DEV_ARP_ACCEPT(in_dev)) {
826                 unsigned int addr_type = inet_addr_type_dev_table(net, dev, sip);
827
828                 /* Unsolicited ARP is not accepted by default.
829                    It is possible, that this option should be enabled for some
830                    devices (strip is candidate)
831                  */
832                 is_garp = arp->ar_op == htons(ARPOP_REQUEST) && tip == sip &&
833                           addr_type == RTN_UNICAST;
834
835                 if (!n &&
836                     ((arp->ar_op == htons(ARPOP_REPLY)  &&
837                                 addr_type == RTN_UNICAST) || is_garp))
838                         n = __neigh_lookup(&arp_tbl, &sip, dev, 1);
839         }
840
841         if (n) {
842                 int state = NUD_REACHABLE;
843                 int override;
844
845                 /* If several different ARP replies follows back-to-back,
846                    use the FIRST one. It is possible, if several proxy
847                    agents are active. Taking the first reply prevents
848                    arp trashing and chooses the fastest router.
849                  */
850                 override = time_after(jiffies,
851                                       n->updated +
852                                       NEIGH_VAR(n->parms, LOCKTIME)) ||
853                            is_garp;
854
855                 /* Broadcast replies and request packets
856                    do not assert neighbour reachability.
857                  */
858                 if (arp->ar_op != htons(ARPOP_REPLY) ||
859                     skb->pkt_type != PACKET_HOST)
860                         state = NUD_STALE;
861                 neigh_update(n, sha, state,
862                              override ? NEIGH_UPDATE_F_OVERRIDE : 0);
863                 neigh_release(n);
864         }
865
866 out:
867         consume_skb(skb);
868         return 0;
869 }
870
871 static void parp_redo(struct sk_buff *skb)
872 {
873         arp_process(NULL, skb);
874 }
875
876
877 /*
878  *      Receive an arp request from the device layer.
879  */
880
881 static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
882                    struct packet_type *pt, struct net_device *orig_dev)
883 {
884         const struct arphdr *arp;
885
886         /* do not tweak dropwatch on an ARP we will ignore */
887         if (dev->flags & IFF_NOARP ||
888             skb->pkt_type == PACKET_OTHERHOST ||
889             skb->pkt_type == PACKET_LOOPBACK)
890                 goto consumeskb;
891
892         skb = skb_share_check(skb, GFP_ATOMIC);
893         if (!skb)
894                 goto out_of_mem;
895
896         /* ARP header, plus 2 device addresses, plus 2 IP addresses.  */
897         if (!pskb_may_pull(skb, arp_hdr_len(dev)))
898                 goto freeskb;
899
900         arp = arp_hdr(skb);
901         if (arp->ar_hln != dev->addr_len || arp->ar_pln != 4)
902                 goto freeskb;
903
904         memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
905
906         return NF_HOOK(NFPROTO_ARP, NF_ARP_IN, NULL, skb,
907                        dev, NULL, arp_process);
908
909 consumeskb:
910         consume_skb(skb);
911         return 0;
912 freeskb:
913         kfree_skb(skb);
914 out_of_mem:
915         return 0;
916 }
917
918 /*
919  *      User level interface (ioctl)
920  */
921
922 /*
923  *      Set (create) an ARP cache entry.
924  */
925
926 static int arp_req_set_proxy(struct net *net, struct net_device *dev, int on)
927 {
928         if (!dev) {
929                 IPV4_DEVCONF_ALL(net, PROXY_ARP) = on;
930                 return 0;
931         }
932         if (__in_dev_get_rtnl(dev)) {
933                 IN_DEV_CONF_SET(__in_dev_get_rtnl(dev), PROXY_ARP, on);
934                 return 0;
935         }
936         return -ENXIO;
937 }
938
939 static int arp_req_set_public(struct net *net, struct arpreq *r,
940                 struct net_device *dev)
941 {
942         __be32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
943         __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
944
945         if (mask && mask != htonl(0xFFFFFFFF))
946                 return -EINVAL;
947         if (!dev && (r->arp_flags & ATF_COM)) {
948                 dev = dev_getbyhwaddr_rcu(net, r->arp_ha.sa_family,
949                                       r->arp_ha.sa_data);
950                 if (!dev)
951                         return -ENODEV;
952         }
953         if (mask) {
954                 if (!pneigh_lookup(&arp_tbl, net, &ip, dev, 1))
955                         return -ENOBUFS;
956                 return 0;
957         }
958
959         return arp_req_set_proxy(net, dev, 1);
960 }
961
962 static int arp_req_set(struct net *net, struct arpreq *r,
963                        struct net_device *dev)
964 {
965         __be32 ip;
966         struct neighbour *neigh;
967         int err;
968
969         if (r->arp_flags & ATF_PUBL)
970                 return arp_req_set_public(net, r, dev);
971
972         ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
973         if (r->arp_flags & ATF_PERM)
974                 r->arp_flags |= ATF_COM;
975         if (!dev) {
976                 struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0);
977
978                 if (IS_ERR(rt))
979                         return PTR_ERR(rt);
980                 dev = rt->dst.dev;
981                 ip_rt_put(rt);
982                 if (!dev)
983                         return -EINVAL;
984         }
985         switch (dev->type) {
986 #if IS_ENABLED(CONFIG_FDDI)
987         case ARPHRD_FDDI:
988                 /*
989                  * According to RFC 1390, FDDI devices should accept ARP
990                  * hardware types of 1 (Ethernet).  However, to be more
991                  * robust, we'll accept hardware types of either 1 (Ethernet)
992                  * or 6 (IEEE 802.2).
993                  */
994                 if (r->arp_ha.sa_family != ARPHRD_FDDI &&
995                     r->arp_ha.sa_family != ARPHRD_ETHER &&
996                     r->arp_ha.sa_family != ARPHRD_IEEE802)
997                         return -EINVAL;
998                 break;
999 #endif
1000         default:
1001                 if (r->arp_ha.sa_family != dev->type)
1002                         return -EINVAL;
1003                 break;
1004         }
1005
1006         neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev);
1007         err = PTR_ERR(neigh);
1008         if (!IS_ERR(neigh)) {
1009                 unsigned int state = NUD_STALE;
1010                 if (r->arp_flags & ATF_PERM)
1011                         state = NUD_PERMANENT;
1012                 err = neigh_update(neigh, (r->arp_flags & ATF_COM) ?
1013                                    r->arp_ha.sa_data : NULL, state,
1014                                    NEIGH_UPDATE_F_OVERRIDE |
1015                                    NEIGH_UPDATE_F_ADMIN);
1016                 neigh_release(neigh);
1017         }
1018         return err;
1019 }
1020
1021 static unsigned int arp_state_to_flags(struct neighbour *neigh)
1022 {
1023         if (neigh->nud_state&NUD_PERMANENT)
1024                 return ATF_PERM | ATF_COM;
1025         else if (neigh->nud_state&NUD_VALID)
1026                 return ATF_COM;
1027         else
1028                 return 0;
1029 }
1030
1031 /*
1032  *      Get an ARP cache entry.
1033  */
1034
1035 static int arp_req_get(struct arpreq *r, struct net_device *dev)
1036 {
1037         __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1038         struct neighbour *neigh;
1039         int err = -ENXIO;
1040
1041         neigh = neigh_lookup(&arp_tbl, &ip, dev);
1042         if (neigh) {
1043                 if (!(neigh->nud_state & NUD_NOARP)) {
1044                         read_lock_bh(&neigh->lock);
1045                         memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
1046                         r->arp_flags = arp_state_to_flags(neigh);
1047                         read_unlock_bh(&neigh->lock);
1048                         r->arp_ha.sa_family = dev->type;
1049                         strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev));
1050                         err = 0;
1051                 }
1052                 neigh_release(neigh);
1053         }
1054         return err;
1055 }
1056
1057 static int arp_invalidate(struct net_device *dev, __be32 ip)
1058 {
1059         struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev);
1060         int err = -ENXIO;
1061
1062         if (neigh) {
1063                 if (neigh->nud_state & ~NUD_NOARP)
1064                         err = neigh_update(neigh, NULL, NUD_FAILED,
1065                                            NEIGH_UPDATE_F_OVERRIDE|
1066                                            NEIGH_UPDATE_F_ADMIN);
1067                 neigh_release(neigh);
1068         }
1069
1070         return err;
1071 }
1072
1073 static int arp_req_delete_public(struct net *net, struct arpreq *r,
1074                 struct net_device *dev)
1075 {
1076         __be32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1077         __be32 mask = ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1078
1079         if (mask == htonl(0xFFFFFFFF))
1080                 return pneigh_delete(&arp_tbl, net, &ip, dev);
1081
1082         if (mask)
1083                 return -EINVAL;
1084
1085         return arp_req_set_proxy(net, dev, 0);
1086 }
1087
1088 static int arp_req_delete(struct net *net, struct arpreq *r,
1089                           struct net_device *dev)
1090 {
1091         __be32 ip;
1092
1093         if (r->arp_flags & ATF_PUBL)
1094                 return arp_req_delete_public(net, r, dev);
1095
1096         ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1097         if (!dev) {
1098                 struct rtable *rt = ip_route_output(net, ip, 0, RTO_ONLINK, 0);
1099                 if (IS_ERR(rt))
1100                         return PTR_ERR(rt);
1101                 dev = rt->dst.dev;
1102                 ip_rt_put(rt);
1103                 if (!dev)
1104                         return -EINVAL;
1105         }
1106         return arp_invalidate(dev, ip);
1107 }
1108
1109 /*
1110  *      Handle an ARP layer I/O control request.
1111  */
1112
1113 int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg)
1114 {
1115         int err;
1116         struct arpreq r;
1117         struct net_device *dev = NULL;
1118
1119         switch (cmd) {
1120         case SIOCDARP:
1121         case SIOCSARP:
1122                 if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
1123                         return -EPERM;
1124         case SIOCGARP:
1125                 err = copy_from_user(&r, arg, sizeof(struct arpreq));
1126                 if (err)
1127                         return -EFAULT;
1128                 break;
1129         default:
1130                 return -EINVAL;
1131         }
1132
1133         if (r.arp_pa.sa_family != AF_INET)
1134                 return -EPFNOSUPPORT;
1135
1136         if (!(r.arp_flags & ATF_PUBL) &&
1137             (r.arp_flags & (ATF_NETMASK | ATF_DONTPUB)))
1138                 return -EINVAL;
1139         if (!(r.arp_flags & ATF_NETMASK))
1140                 ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
1141                                                            htonl(0xFFFFFFFFUL);
1142         rtnl_lock();
1143         if (r.arp_dev[0]) {
1144                 err = -ENODEV;
1145                 dev = __dev_get_by_name(net, r.arp_dev);
1146                 if (!dev)
1147                         goto out;
1148
1149                 /* Mmmm... It is wrong... ARPHRD_NETROM==0 */
1150                 if (!r.arp_ha.sa_family)
1151                         r.arp_ha.sa_family = dev->type;
1152                 err = -EINVAL;
1153                 if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type)
1154                         goto out;
1155         } else if (cmd == SIOCGARP) {
1156                 err = -ENODEV;
1157                 goto out;
1158         }
1159
1160         switch (cmd) {
1161         case SIOCDARP:
1162                 err = arp_req_delete(net, &r, dev);
1163                 break;
1164         case SIOCSARP:
1165                 err = arp_req_set(net, &r, dev);
1166                 break;
1167         case SIOCGARP:
1168                 err = arp_req_get(&r, dev);
1169                 break;
1170         }
1171 out:
1172         rtnl_unlock();
1173         if (cmd == SIOCGARP && !err && copy_to_user(arg, &r, sizeof(r)))
1174                 err = -EFAULT;
1175         return err;
1176 }
1177
1178 static int arp_netdev_event(struct notifier_block *this, unsigned long event,
1179                             void *ptr)
1180 {
1181         struct net_device *dev = netdev_notifier_info_to_dev(ptr);
1182         struct netdev_notifier_change_info *change_info;
1183
1184         switch (event) {
1185         case NETDEV_CHANGEADDR:
1186                 neigh_changeaddr(&arp_tbl, dev);
1187                 rt_cache_flush(dev_net(dev));
1188                 break;
1189         case NETDEV_CHANGE:
1190                 change_info = ptr;
1191                 if (change_info->flags_changed & IFF_NOARP)
1192                         neigh_changeaddr(&arp_tbl, dev);
1193                 break;
1194         default:
1195                 break;
1196         }
1197
1198         return NOTIFY_DONE;
1199 }
1200
1201 static struct notifier_block arp_netdev_notifier = {
1202         .notifier_call = arp_netdev_event,
1203 };
1204
1205 /* Note, that it is not on notifier chain.
1206    It is necessary, that this routine was called after route cache will be
1207    flushed.
1208  */
1209 void arp_ifdown(struct net_device *dev)
1210 {
1211         neigh_ifdown(&arp_tbl, dev);
1212 }
1213
1214
1215 /*
1216  *      Called once on startup.
1217  */
1218
1219 static struct packet_type arp_packet_type __read_mostly = {
1220         .type = cpu_to_be16(ETH_P_ARP),
1221         .func = arp_rcv,
1222 };
1223
1224 static int arp_proc_init(void);
1225
1226 void __init arp_init(void)
1227 {
1228         neigh_table_init(NEIGH_ARP_TABLE, &arp_tbl);
1229
1230         dev_add_pack(&arp_packet_type);
1231         arp_proc_init();
1232 #ifdef CONFIG_SYSCTL
1233         neigh_sysctl_register(NULL, &arp_tbl.parms, NULL);
1234 #endif
1235         register_netdevice_notifier(&arp_netdev_notifier);
1236 }
1237
1238 #ifdef CONFIG_PROC_FS
1239 #if IS_ENABLED(CONFIG_AX25)
1240
1241 /* ------------------------------------------------------------------------ */
1242 /*
1243  *      ax25 -> ASCII conversion
1244  */
1245 static char *ax2asc2(ax25_address *a, char *buf)
1246 {
1247         char c, *s;
1248         int n;
1249
1250         for (n = 0, s = buf; n < 6; n++) {
1251                 c = (a->ax25_call[n] >> 1) & 0x7F;
1252
1253                 if (c != ' ')
1254                         *s++ = c;
1255         }
1256
1257         *s++ = '-';
1258         n = (a->ax25_call[6] >> 1) & 0x0F;
1259         if (n > 9) {
1260                 *s++ = '1';
1261                 n -= 10;
1262         }
1263
1264         *s++ = n + '0';
1265         *s++ = '\0';
1266
1267         if (*buf == '\0' || *buf == '-')
1268                 return "*";
1269
1270         return buf;
1271 }
1272 #endif /* CONFIG_AX25 */
1273
1274 #define HBUFFERLEN 30
1275
1276 static void arp_format_neigh_entry(struct seq_file *seq,
1277                                    struct neighbour *n)
1278 {
1279         char hbuffer[HBUFFERLEN];
1280         int k, j;
1281         char tbuf[16];
1282         struct net_device *dev = n->dev;
1283         int hatype = dev->type;
1284
1285         read_lock(&n->lock);
1286         /* Convert hardware address to XX:XX:XX:XX ... form. */
1287 #if IS_ENABLED(CONFIG_AX25)
1288         if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM)
1289                 ax2asc2((ax25_address *)n->ha, hbuffer);
1290         else {
1291 #endif
1292         for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
1293                 hbuffer[k++] = hex_asc_hi(n->ha[j]);
1294                 hbuffer[k++] = hex_asc_lo(n->ha[j]);
1295                 hbuffer[k++] = ':';
1296         }
1297         if (k != 0)
1298                 --k;
1299         hbuffer[k] = 0;
1300 #if IS_ENABLED(CONFIG_AX25)
1301         }
1302 #endif
1303         sprintf(tbuf, "%pI4", n->primary_key);
1304         seq_printf(seq, "%-16s 0x%-10x0x%-10x%s     *        %s\n",
1305                    tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
1306         read_unlock(&n->lock);
1307 }
1308
1309 static void arp_format_pneigh_entry(struct seq_file *seq,
1310                                     struct pneigh_entry *n)
1311 {
1312         struct net_device *dev = n->dev;
1313         int hatype = dev ? dev->type : 0;
1314         char tbuf[16];
1315
1316         sprintf(tbuf, "%pI4", n->key);
1317         seq_printf(seq, "%-16s 0x%-10x0x%-10x%s     *        %s\n",
1318                    tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00",
1319                    dev ? dev->name : "*");
1320 }
1321
1322 static int arp_seq_show(struct seq_file *seq, void *v)
1323 {
1324         if (v == SEQ_START_TOKEN) {
1325                 seq_puts(seq, "IP address       HW type     Flags       "
1326                               "HW address            Mask     Device\n");
1327         } else {
1328                 struct neigh_seq_state *state = seq->private;
1329
1330                 if (state->flags & NEIGH_SEQ_IS_PNEIGH)
1331                         arp_format_pneigh_entry(seq, v);
1332                 else
1333                         arp_format_neigh_entry(seq, v);
1334         }
1335
1336         return 0;
1337 }
1338
1339 static void *arp_seq_start(struct seq_file *seq, loff_t *pos)
1340 {
1341         /* Don't want to confuse "arp -a" w/ magic entries,
1342          * so we tell the generic iterator to skip NUD_NOARP.
1343          */
1344         return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP);
1345 }
1346
1347 /* ------------------------------------------------------------------------ */
1348
1349 static const struct seq_operations arp_seq_ops = {
1350         .start  = arp_seq_start,
1351         .next   = neigh_seq_next,
1352         .stop   = neigh_seq_stop,
1353         .show   = arp_seq_show,
1354 };
1355
1356 static int arp_seq_open(struct inode *inode, struct file *file)
1357 {
1358         return seq_open_net(inode, file, &arp_seq_ops,
1359                             sizeof(struct neigh_seq_state));
1360 }
1361
1362 static const struct file_operations arp_seq_fops = {
1363         .owner          = THIS_MODULE,
1364         .open           = arp_seq_open,
1365         .read           = seq_read,
1366         .llseek         = seq_lseek,
1367         .release        = seq_release_net,
1368 };
1369
1370
1371 static int __net_init arp_net_init(struct net *net)
1372 {
1373         if (!proc_create("arp", S_IRUGO, net->proc_net, &arp_seq_fops))
1374                 return -ENOMEM;
1375         return 0;
1376 }
1377
1378 static void __net_exit arp_net_exit(struct net *net)
1379 {
1380         remove_proc_entry("arp", net->proc_net);
1381 }
1382
1383 static struct pernet_operations arp_net_ops = {
1384         .init = arp_net_init,
1385         .exit = arp_net_exit,
1386 };
1387
1388 static int __init arp_proc_init(void)
1389 {
1390         return register_pernet_subsys(&arp_net_ops);
1391 }
1392
1393 #else /* CONFIG_PROC_FS */
1394
1395 static int __init arp_proc_init(void)
1396 {
1397         return 0;
1398 }
1399
1400 #endif /* CONFIG_PROC_FS */