drivers/usb/serial/whiteheat.c

   1 /*
   2  * USB ConnectTech WhiteHEAT driver
   3  *
   4  *      Copyright (C) 2002
   5  *          Connect Tech Inc.
   6  *
   7  *      Copyright (C) 1999 - 2001
   8  *          Greg Kroah-Hartman (greg@kroah.com)
   9  *
  10  *      This program is free software; you can redistribute it and/or modify
  11  *      it under the terms of the GNU General Public License as published by
  12  *      the Free Software Foundation; either version 2 of the License, or
  13  *      (at your option) any later version.
  14  *
  15  * See Documentation/usb/usb-serial.txt for more information on using this
  16  * driver
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/errno.h>
  21 #include <linux/slab.h>
  22 #include <linux/tty.h>
  23 #include <linux/tty_driver.h>
  24 #include <linux/tty_flip.h>
  25 #include <linux/module.h>
  26 #include <linux/spinlock.h>
  27 #include <linux/mutex.h>
  28 #include <linux/uaccess.h>
  29 #include <asm/termbits.h>
  30 #include <linux/usb.h>
  31 #include <linux/serial_reg.h>
  32 #include <linux/serial.h>
  33 #include <linux/usb/serial.h>
  34 #include <linux/usb/ezusb.h>
  35 #include "whiteheat.h"                  /* WhiteHEAT specific commands */
  36
  37 #ifndef CMSPAR
  38 #define CMSPAR 0
  39 #endif
  40
  41 /*
  42  * Version Information
  43  */
  44 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
  45 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
  46
  47 #define CONNECT_TECH_VENDOR_ID          0x0710
  48 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
  49 #define CONNECT_TECH_WHITE_HEAT_ID      0x8001
  50
  51 /*
  52    ID tables for whiteheat are unusual, because we want to different
  53    things for different versions of the device.  Eventually, this
  54    will be doable from a single table.  But, for now, we define two
  55    separate ID tables, and then a third table that combines them
  56    just for the purpose of exporting the autoloading information.
  57 */
  58 static const struct usb_device_id id_table_std[] = {
  59         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
  60         { }                                             /* Terminating entry */
  61 };
  62
  63 static const struct usb_device_id id_table_prerenumeration[] = {
  64         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
  65         { }                                             /* Terminating entry */
  66 };
  67
  68 static const struct usb_device_id id_table_combined[] = {
  69         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
  70         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
  71         { }                                             /* Terminating entry */
  72 };
  73
  74 MODULE_DEVICE_TABLE(usb, id_table_combined);
  75
  76
  77 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
  78 static int  whiteheat_firmware_download(struct usb_serial *serial,
  79                                         const struct usb_device_id *id);
  80 static int  whiteheat_firmware_attach(struct usb_serial *serial);
  81
  82 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
  83 static int whiteheat_probe(struct usb_serial *serial,
  84                                 const struct usb_device_id *id);
  85 static int  whiteheat_attach(struct usb_serial *serial);
  86 static void whiteheat_release(struct usb_serial *serial);
  87 static int  whiteheat_port_probe(struct usb_serial_port *port);
  88 static int  whiteheat_port_remove(struct usb_serial_port *port);
  89 static int  whiteheat_open(struct tty_struct *tty,
  90                         struct usb_serial_port *port);
  91 static void whiteheat_close(struct usb_serial_port *port);
  92 static int  whiteheat_ioctl(struct tty_struct *tty,
  93                         unsigned int cmd, unsigned long arg);
  94 static void whiteheat_set_termios(struct tty_struct *tty,
  95                         struct usb_serial_port *port, struct ktermios *old);
  96 static int  whiteheat_tiocmget(struct tty_struct *tty);
  97 static int  whiteheat_tiocmset(struct tty_struct *tty,
  98                         unsigned int set, unsigned int clear);
  99 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
 100
 101 static struct usb_serial_driver whiteheat_fake_device = {
 102         .driver = {
 103                 .owner =        THIS_MODULE,
 104                 .name =         "whiteheatnofirm",
 105         },
 106         .description =          "Connect Tech - WhiteHEAT - (prerenumeration)",
 107         .id_table =             id_table_prerenumeration,
 108         .num_ports =            1,
 109         .probe =                whiteheat_firmware_download,
 110         .attach =               whiteheat_firmware_attach,
 111 };
 112
 113 static struct usb_serial_driver whiteheat_device = {
 114         .driver = {
 115                 .owner =        THIS_MODULE,
 116                 .name =         "whiteheat",
 117         },
 118         .description =          "Connect Tech - WhiteHEAT",
 119         .id_table =             id_table_std,
 120         .num_ports =            4,
 121         .probe =                whiteheat_probe,
 122         .attach =               whiteheat_attach,
 123         .release =              whiteheat_release,
 124         .port_probe =           whiteheat_port_probe,
 125         .port_remove =          whiteheat_port_remove,
 126         .open =                 whiteheat_open,
 127         .close =                whiteheat_close,
 128         .ioctl =                whiteheat_ioctl,
 129         .set_termios =          whiteheat_set_termios,
 130         .break_ctl =            whiteheat_break_ctl,
 131         .tiocmget =             whiteheat_tiocmget,
 132         .tiocmset =             whiteheat_tiocmset,
 133         .throttle =             usb_serial_generic_throttle,
 134         .unthrottle =           usb_serial_generic_unthrottle,
 135 };
 136
 137 static struct usb_serial_driver * const serial_drivers[] = {
 138         &whiteheat_fake_device, &whiteheat_device, NULL
 139 };
 140
 141 struct whiteheat_command_private {
 142         struct mutex            mutex;
 143         __u8                    port_running;
 144         __u8                    command_finished;
 145         wait_queue_head_t       wait_command; /* for handling sleeping whilst
 146                                                  waiting for a command to
 147                                                  finish */
 148         __u8                    result_buffer[64];
 149 };
 150
 151 struct whiteheat_private {
 152         __u8                    mcr;            /* FIXME: no locking on mcr */
 153 };
 154
 155
 156 /* local function prototypes */
 157 static int start_command_port(struct usb_serial *serial);
 158 static void stop_command_port(struct usb_serial *serial);
 159 static void command_port_write_callback(struct urb *urb);
 160 static void command_port_read_callback(struct urb *urb);
 161
 162 static int firm_send_command(struct usb_serial_port *port, __u8 command,
 163                                                 __u8 *data, __u8 datasize);
 164 static int firm_open(struct usb_serial_port *port);
 165 static int firm_close(struct usb_serial_port *port);
 166 static void firm_setup_port(struct tty_struct *tty);
 167 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
 168 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
 169 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
 170 static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
 171 static int firm_get_dtr_rts(struct usb_serial_port *port);
 172 static int firm_report_tx_done(struct usb_serial_port *port);
 173
 174
 175 #define COMMAND_PORT            4
 176 #define COMMAND_TIMEOUT         (2*HZ)  /* 2 second timeout for a command */
 177 #define COMMAND_TIMEOUT_MS      2000
 178 #define CLOSING_DELAY           (30 * HZ)
 179
 180
 181 /*****************************************************************************
 182  * Connect Tech's White Heat prerenumeration driver functions
 183  *****************************************************************************/
 184
 185 /* steps to download the firmware to the WhiteHEAT device:
 186  - hold the reset (by writing to the reset bit of the CPUCS register)
 187  - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
 188  - release the reset (by writing to the CPUCS register)
 189  - download the WH.HEX file for all addresses greater than 0x1b3f using
 190    VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
 191  - hold the reset
 192  - download the WH.HEX file for all addresses less than 0x1b40 using
 193    VENDOR_REQUEST_ANCHOR_LOAD
 194  - release the reset
 195  - device renumerated itself and comes up as new device id with all
 196    firmware download completed.
 197 */
 198 static int whiteheat_firmware_download(struct usb_serial *serial,
 199                                         const struct usb_device_id *id)
 200 {
 201         int response;
 202
 203         response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw");
 204         if (response >= 0) {
 205                 response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw");
 206                 if (response >= 0)
 207                         return 0;
 208         }
 209         return -ENOENT;
 210 }
 211
 212
 213 static int whiteheat_firmware_attach(struct usb_serial *serial)
 214 {
 215         /* We want this device to fail to have a driver assigned to it */
 216         return 1;
 217 }
 218
 219
 220 /*****************************************************************************
 221  * Connect Tech's White Heat serial driver functions
 222  *****************************************************************************/
 223
 224 static int whiteheat_probe(struct usb_serial *serial,
 225                                 const struct usb_device_id *id)
 226 {
 227         struct usb_host_interface *iface_desc;
 228         struct usb_endpoint_descriptor *endpoint;
 229         size_t num_bulk_in = 0;
 230         size_t num_bulk_out = 0;
 231         size_t min_num_bulk;
 232         unsigned int i;
 233
 234         iface_desc = serial->interface->cur_altsetting;
 235
 236         for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
 237                 endpoint = &iface_desc->endpoint[i].desc;
 238                 if (usb_endpoint_is_bulk_in(endpoint))
 239                         ++num_bulk_in;
 240                 if (usb_endpoint_is_bulk_out(endpoint))
 241                         ++num_bulk_out;
 242         }
 243
 244         min_num_bulk = COMMAND_PORT + 1;
 245         if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk)
 246                 return -ENODEV;
 247
 248         return 0;
 249 }
 250
 251 static int whiteheat_attach(struct usb_serial *serial)
 252 {
 253         struct usb_serial_port *command_port;
 254         struct whiteheat_command_private *command_info;
 255         struct whiteheat_hw_info *hw_info;
 256         int pipe;
 257         int ret;
 258         int alen;
 259         __u8 *command;
 260         __u8 *result;
 261
 262         command_port = serial->port[COMMAND_PORT];
 263
 264         pipe = usb_sndbulkpipe(serial->dev,
 265                         command_port->bulk_out_endpointAddress);
 266         command = kmalloc(2, GFP_KERNEL);
 267         if (!command)
 268                 goto no_command_buffer;
 269         command[0] = WHITEHEAT_GET_HW_INFO;
 270         command[1] = 0;
 271
 272         result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
 273         if (!result)
 274                 goto no_result_buffer;
 275         /*
 276          * When the module is reloaded the firmware is still there and
 277          * the endpoints are still in the usb core unchanged. This is the
 278          * unlinking bug in disguise. Same for the call below.
 279          */
 280         usb_clear_halt(serial->dev, pipe);
 281         ret = usb_bulk_msg(serial->dev, pipe, command, 2,
 282                                                 &alen, COMMAND_TIMEOUT_MS);
 283         if (ret) {
 284                 dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
 285                         serial->type->description, ret);
 286                 goto no_firmware;
 287         } else if (alen != 2) {
 288                 dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
 289                         serial->type->description, alen);
 290                 goto no_firmware;
 291         }
 292
 293         pipe = usb_rcvbulkpipe(serial->dev,
 294                                 command_port->bulk_in_endpointAddress);
 295         /* See the comment on the usb_clear_halt() above */
 296         usb_clear_halt(serial->dev, pipe);
 297         ret = usb_bulk_msg(serial->dev, pipe, result,
 298                         sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
 299         if (ret) {
 300                 dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
 301                         serial->type->description, ret);
 302                 goto no_firmware;
 303         } else if (alen != sizeof(*hw_info) + 1) {
 304                 dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
 305                         serial->type->description, alen);
 306                 goto no_firmware;
 307         } else if (result[0] != command[0]) {
 308                 dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
 309                         serial->type->description, result[0]);
 310                 goto no_firmware;
 311         }
 312
 313         hw_info = (struct whiteheat_hw_info *)&result[1];
 314
 315         dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n",
 316                  serial->type->description,
 317                  hw_info->sw_major_rev, hw_info->sw_minor_rev);
 318
 319         command_info = kmalloc(sizeof(struct whiteheat_command_private),
 320                                                                 GFP_KERNEL);
 321         if (!command_info)
 322                 goto no_command_private;
 323
 324         mutex_init(&command_info->mutex);
 325         command_info->port_running = 0;
 326         init_waitqueue_head(&command_info->wait_command);
 327         usb_set_serial_port_data(command_port, command_info);
 328         command_port->write_urb->complete = command_port_write_callback;
 329         command_port->read_urb->complete = command_port_read_callback;
 330         kfree(result);
 331         kfree(command);
 332
 333         return 0;
 334
 335 no_firmware:
 336         /* Firmware likely not running */
 337         dev_err(&serial->dev->dev,
 338                 "%s: Unable to retrieve firmware version, try replugging\n",
 339                 serial->type->description);
 340         dev_err(&serial->dev->dev,
 341                 "%s: If the firmware is not running (status led not blinking)\n",
 342                 serial->type->description);
 343         dev_err(&serial->dev->dev,
 344                 "%s: please contact support@connecttech.com\n",
 345                 serial->type->description);
 346         kfree(result);
 347         kfree(command);
 348         return -ENODEV;
 349
 350 no_command_private:
 351         kfree(result);
 352 no_result_buffer:
 353         kfree(command);
 354 no_command_buffer:
 355         return -ENOMEM;
 356 }
 357
 358 static void whiteheat_release(struct usb_serial *serial)
 359 {
 360         struct usb_serial_port *command_port;
 361
 362         /* free up our private data for our command port */
 363         command_port = serial->port[COMMAND_PORT];
 364         kfree(usb_get_serial_port_data(command_port));
 365 }
 366
 367 static int whiteheat_port_probe(struct usb_serial_port *port)
 368 {
 369         struct whiteheat_private *info;
 370
 371         info = kzalloc(sizeof(*info), GFP_KERNEL);
 372         if (!info)
 373                 return -ENOMEM;
 374
 375         usb_set_serial_port_data(port, info);
 376
 377         return 0;
 378 }
 379
 380 static int whiteheat_port_remove(struct usb_serial_port *port)
 381 {
 382         struct whiteheat_private *info;
 383
 384         info = usb_get_serial_port_data(port);
 385         kfree(info);
 386
 387         return 0;
 388 }
 389
 390 static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
 391 {
 392         int retval;
 393
 394         retval = start_command_port(port->serial);
 395         if (retval)
 396                 goto exit;
 397
 398         /* send an open port command */
 399         retval = firm_open(port);
 400         if (retval) {
 401                 stop_command_port(port->serial);
 402                 goto exit;
 403         }
 404
 405         retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
 406         if (retval) {
 407                 firm_close(port);
 408                 stop_command_port(port->serial);
 409                 goto exit;
 410         }
 411
 412         if (tty)
 413                 firm_setup_port(tty);
 414
 415         /* Work around HCD bugs */
 416         usb_clear_halt(port->serial->dev, port->read_urb->pipe);
 417         usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 418
 419         retval = usb_serial_generic_open(tty, port);
 420         if (retval) {
 421                 firm_close(port);
 422                 stop_command_port(port->serial);
 423                 goto exit;
 424         }
 425 exit:
 426         return retval;
 427 }
 428
 429
 430 static void whiteheat_close(struct usb_serial_port *port)
 431 {
 432         firm_report_tx_done(port);
 433         firm_close(port);
 434
 435         usb_serial_generic_close(port);
 436
 437         stop_command_port(port->serial);
 438 }
 439
 440 static int whiteheat_tiocmget(struct tty_struct *tty)
 441 {
 442         struct usb_serial_port *port = tty->driver_data;
 443         struct whiteheat_private *info = usb_get_serial_port_data(port);
 444         unsigned int modem_signals = 0;
 445
 446         firm_get_dtr_rts(port);
 447         if (info->mcr & UART_MCR_DTR)
 448                 modem_signals |= TIOCM_DTR;
 449         if (info->mcr & UART_MCR_RTS)
 450                 modem_signals |= TIOCM_RTS;
 451
 452         return modem_signals;
 453 }
 454
 455 static int whiteheat_tiocmset(struct tty_struct *tty,
 456                                unsigned int set, unsigned int clear)
 457 {
 458         struct usb_serial_port *port = tty->driver_data;
 459         struct whiteheat_private *info = usb_get_serial_port_data(port);
 460
 461         if (set & TIOCM_RTS)
 462                 info->mcr |= UART_MCR_RTS;
 463         if (set & TIOCM_DTR)
 464                 info->mcr |= UART_MCR_DTR;
 465
 466         if (clear & TIOCM_RTS)
 467                 info->mcr &= ~UART_MCR_RTS;
 468         if (clear & TIOCM_DTR)
 469                 info->mcr &= ~UART_MCR_DTR;
 470
 471         firm_set_dtr(port, info->mcr & UART_MCR_DTR);
 472         firm_set_rts(port, info->mcr & UART_MCR_RTS);
 473         return 0;
 474 }
 475
 476
 477 static int whiteheat_ioctl(struct tty_struct *tty,
 478                                         unsigned int cmd, unsigned long arg)
 479 {
 480         struct usb_serial_port *port = tty->driver_data;
 481         struct serial_struct serstruct;
 482         void __user *user_arg = (void __user *)arg;
 483
 484         switch (cmd) {
 485         case TIOCGSERIAL:
 486                 memset(&serstruct, 0, sizeof(serstruct));
 487                 serstruct.type = PORT_16654;
 488                 serstruct.line = port->minor;
 489                 serstruct.port = port->port_number;
 490                 serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 491                 serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo);
 492                 serstruct.custom_divisor = 0;
 493                 serstruct.baud_base = 460800;
 494                 serstruct.close_delay = CLOSING_DELAY;
 495                 serstruct.closing_wait = CLOSING_DELAY;
 496
 497                 if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
 498                         return -EFAULT;
 499                 break;
 500         default:
 501                 break;
 502         }
 503
 504         return -ENOIOCTLCMD;
 505 }
 506
 507
 508 static void whiteheat_set_termios(struct tty_struct *tty,
 509         struct usb_serial_port *port, struct ktermios *old_termios)
 510 {
 511         firm_setup_port(tty);
 512 }
 513
 514 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state)
 515 {
 516         struct usb_serial_port *port = tty->driver_data;
 517         firm_set_break(port, break_state);
 518 }
 519
 520
 521 /*****************************************************************************
 522  * Connect Tech's White Heat callback routines
 523  *****************************************************************************/
 524 static void command_port_write_callback(struct urb *urb)
 525 {
 526         int status = urb->status;
 527
 528         if (status) {
 529                 dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status);
 530                 return;
 531         }
 532 }
 533
 534
 535 static void command_port_read_callback(struct urb *urb)
 536 {
 537         struct usb_serial_port *command_port = urb->context;
 538         struct whiteheat_command_private *command_info;
 539         int status = urb->status;
 540         unsigned char *data = urb->transfer_buffer;
 541         int result;
 542
 543         command_info = usb_get_serial_port_data(command_port);
 544         if (!command_info) {
 545                 dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__);
 546                 return;
 547         }
 548         if (!urb->actual_length) {
 549                 dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__);
 550                 return;
 551         }
 552         if (status) {
 553                 dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status);
 554                 if (status != -ENOENT)
 555                         command_info->command_finished = WHITEHEAT_CMD_FAILURE;
 556                 wake_up(&command_info->wait_command);
 557                 return;
 558         }
 559
 560         usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data);
 561
 562         if (data[0] == WHITEHEAT_CMD_COMPLETE) {
 563                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
 564                 wake_up(&command_info->wait_command);
 565         } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
 566                 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
 567                 wake_up(&command_info->wait_command);
 568         } else if (data[0] == WHITEHEAT_EVENT) {
 569                 /* These are unsolicited reports from the firmware, hence no
 570                    waiting command to wakeup */
 571                 dev_dbg(&urb->dev->dev, "%s - event received\n", __func__);
 572         } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) &&
 573                 (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) {
 574                 memcpy(command_info->result_buffer, &data[1],
 575                                                 urb->actual_length - 1);
 576                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
 577                 wake_up(&command_info->wait_command);
 578         } else
 579                 dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__);
 580
 581         /* Continue trying to always read */
 582         result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
 583         if (result)
 584                 dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n",
 585                         __func__, result);
 586 }
 587
 588
 589 /*****************************************************************************
 590  * Connect Tech's White Heat firmware interface
 591  *****************************************************************************/
 592 static int firm_send_command(struct usb_serial_port *port, __u8 command,
 593                                                 __u8 *data, __u8 datasize)
 594 {
 595         struct usb_serial_port *command_port;
 596         struct whiteheat_command_private *command_info;
 597         struct whiteheat_private *info;
 598         struct device *dev = &port->dev;
 599         __u8 *transfer_buffer;
 600         int retval = 0;
 601         int t;
 602
 603         dev_dbg(dev, "%s - command %d\n", __func__, command);
 604
 605         command_port = port->serial->port[COMMAND_PORT];
 606         command_info = usb_get_serial_port_data(command_port);
 607         mutex_lock(&command_info->mutex);
 608         command_info->command_finished = false;
 609
 610         transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
 611         transfer_buffer[0] = command;
 612         memcpy(&transfer_buffer[1], data, datasize);
 613         command_port->write_urb->transfer_buffer_length = datasize + 1;
 614         retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
 615         if (retval) {
 616                 dev_dbg(dev, "%s - submit urb failed\n", __func__);
 617                 goto exit;
 618         }
 619
 620         /* wait for the command to complete */
 621         t = wait_event_timeout(command_info->wait_command,
 622                 (bool)command_info->command_finished, COMMAND_TIMEOUT);
 623         if (!t)
 624                 usb_kill_urb(command_port->write_urb);
 625
 626         if (command_info->command_finished == false) {
 627                 dev_dbg(dev, "%s - command timed out.\n", __func__);
 628                 retval = -ETIMEDOUT;
 629                 goto exit;
 630         }
 631
 632         if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
 633                 dev_dbg(dev, "%s - command failed.\n", __func__);
 634                 retval = -EIO;
 635                 goto exit;
 636         }
 637
 638         if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
 639                 dev_dbg(dev, "%s - command completed.\n", __func__);
 640                 switch (command) {
 641                 case WHITEHEAT_GET_DTR_RTS:
 642                         info = usb_get_serial_port_data(port);
 643                         memcpy(&info->mcr, command_info->result_buffer,
 644                                         sizeof(struct whiteheat_dr_info));
 645                                 break;
 646                 }
 647         }
 648 exit:
 649         mutex_unlock(&command_info->mutex);
 650         return retval;
 651 }
 652
 653
 654 static int firm_open(struct usb_serial_port *port)
 655 {
 656         struct whiteheat_simple open_command;
 657
 658         open_command.port = port->port_number + 1;
 659         return firm_send_command(port, WHITEHEAT_OPEN,
 660                 (__u8 *)&open_command, sizeof(open_command));
 661 }
 662
 663
 664 static int firm_close(struct usb_serial_port *port)
 665 {
 666         struct whiteheat_simple close_command;
 667
 668         close_command.port = port->port_number + 1;
 669         return firm_send_command(port, WHITEHEAT_CLOSE,
 670                         (__u8 *)&close_command, sizeof(close_command));
 671 }
 672
 673
 674 static void firm_setup_port(struct tty_struct *tty)
 675 {
 676         struct usb_serial_port *port = tty->driver_data;
 677         struct device *dev = &port->dev;
 678         struct whiteheat_port_settings port_settings;
 679         unsigned int cflag = tty->termios.c_cflag;
 680
 681         port_settings.port = port->port_number + 1;
 682
 683         /* get the byte size */
 684         switch (cflag & CSIZE) {
 685         case CS5:       port_settings.bits = 5;   break;
 686         case CS6:       port_settings.bits = 6;   break;
 687         case CS7:       port_settings.bits = 7;   break;
 688         default:
 689         case CS8:       port_settings.bits = 8;   break;
 690         }
 691         dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits);
 692
 693         /* determine the parity */
 694         if (cflag & PARENB)
 695                 if (cflag & CMSPAR)
 696                         if (cflag & PARODD)
 697                                 port_settings.parity = WHITEHEAT_PAR_MARK;
 698                         else
 699                                 port_settings.parity = WHITEHEAT_PAR_SPACE;
 700                 else
 701                         if (cflag & PARODD)
 702                                 port_settings.parity = WHITEHEAT_PAR_ODD;
 703                         else
 704                                 port_settings.parity = WHITEHEAT_PAR_EVEN;
 705         else
 706                 port_settings.parity = WHITEHEAT_PAR_NONE;
 707         dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity);
 708
 709         /* figure out the stop bits requested */
 710         if (cflag & CSTOPB)
 711                 port_settings.stop = 2;
 712         else
 713                 port_settings.stop = 1;
 714         dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop);
 715
 716         /* figure out the flow control settings */
 717         if (cflag & CRTSCTS)
 718                 port_settings.hflow = (WHITEHEAT_HFLOW_CTS |
 719                                                 WHITEHEAT_HFLOW_RTS);
 720         else
 721                 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
 722         dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__,
 723             (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
 724             (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
 725             (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
 726             (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
 727
 728         /* determine software flow control */
 729         if (I_IXOFF(tty))
 730                 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
 731         else
 732                 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
 733         dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow);
 734
 735         port_settings.xon = START_CHAR(tty);
 736         port_settings.xoff = STOP_CHAR(tty);
 737         dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff);
 738
 739         /* get the baud rate wanted */
 740         port_settings.baud = tty_get_baud_rate(tty);
 741         dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud);
 742
 743         /* fixme: should set validated settings */
 744         tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud);
 745         /* handle any settings that aren't specified in the tty structure */
 746         port_settings.lloop = 0;
 747
 748         /* now send the message to the device */
 749         firm_send_command(port, WHITEHEAT_SETUP_PORT,
 750                         (__u8 *)&port_settings, sizeof(port_settings));
 751 }
 752
 753
 754 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
 755 {
 756         struct whiteheat_set_rdb rts_command;
 757
 758         rts_command.port = port->port_number + 1;
 759         rts_command.state = onoff;
 760         return firm_send_command(port, WHITEHEAT_SET_RTS,
 761                         (__u8 *)&rts_command, sizeof(rts_command));
 762 }
 763
 764
 765 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
 766 {
 767         struct whiteheat_set_rdb dtr_command;
 768
 769         dtr_command.port = port->port_number + 1;
 770         dtr_command.state = onoff;
 771         return firm_send_command(port, WHITEHEAT_SET_DTR,
 772                         (__u8 *)&dtr_command, sizeof(dtr_command));
 773 }
 774
 775
 776 static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
 777 {
 778         struct whiteheat_set_rdb break_command;
 779
 780         break_command.port = port->port_number + 1;
 781         break_command.state = onoff;
 782         return firm_send_command(port, WHITEHEAT_SET_BREAK,
 783                         (__u8 *)&break_command, sizeof(break_command));
 784 }
 785
 786
 787 static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
 788 {
 789         struct whiteheat_purge purge_command;
 790
 791         purge_command.port = port->port_number + 1;
 792         purge_command.what = rxtx;
 793         return firm_send_command(port, WHITEHEAT_PURGE,
 794                         (__u8 *)&purge_command, sizeof(purge_command));
 795 }
 796
 797
 798 static int firm_get_dtr_rts(struct usb_serial_port *port)
 799 {
 800         struct whiteheat_simple get_dr_command;
 801
 802         get_dr_command.port = port->port_number + 1;
 803         return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
 804                         (__u8 *)&get_dr_command, sizeof(get_dr_command));
 805 }
 806
 807
 808 static int firm_report_tx_done(struct usb_serial_port *port)
 809 {
 810         struct whiteheat_simple close_command;
 811
 812         close_command.port = port->port_number + 1;
 813         return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
 814                         (__u8 *)&close_command, sizeof(close_command));
 815 }
 816
 817
 818 /*****************************************************************************
 819  * Connect Tech's White Heat utility functions
 820  *****************************************************************************/
 821 static int start_command_port(struct usb_serial *serial)
 822 {
 823         struct usb_serial_port *command_port;
 824         struct whiteheat_command_private *command_info;
 825         int retval = 0;
 826
 827         command_port = serial->port[COMMAND_PORT];
 828         command_info = usb_get_serial_port_data(command_port);
 829         mutex_lock(&command_info->mutex);
 830         if (!command_info->port_running) {
 831                 /* Work around HCD bugs */
 832                 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
 833
 834                 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
 835                 if (retval) {
 836                         dev_err(&serial->dev->dev,
 837                                 "%s - failed submitting read urb, error %d\n",
 838                                 __func__, retval);
 839                         goto exit;
 840                 }
 841         }
 842         command_info->port_running++;
 843
 844 exit:
 845         mutex_unlock(&command_info->mutex);
 846         return retval;
 847 }
 848
 849
 850 static void stop_command_port(struct usb_serial *serial)
 851 {
 852         struct usb_serial_port *command_port;
 853         struct whiteheat_command_private *command_info;
 854
 855         command_port = serial->port[COMMAND_PORT];
 856         command_info = usb_get_serial_port_data(command_port);
 857         mutex_lock(&command_info->mutex);
 858         command_info->port_running--;
 859         if (!command_info->port_running)
 860                 usb_kill_urb(command_port->read_urb);
 861         mutex_unlock(&command_info->mutex);
 862 }
 863
 864 module_usb_serial_driver(serial_drivers, id_table_combined);
 865
 866 MODULE_AUTHOR(DRIVER_AUTHOR);
 867 MODULE_DESCRIPTION(DRIVER_DESC);
 868 MODULE_LICENSE("GPL");
 869
 870 MODULE_FIRMWARE("whiteheat.fw");
 871 MODULE_FIRMWARE("whiteheat_loader.fw");